summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2014-11-11ALSA: vx: Fix missing kerneldoc parameter descriptionsTakashi Iwai3-0/+16
The file isn't processed, but it's not bad to fix beforehand. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-10ALSA: usb-audio: Fix Oops by composite quirk enhancementTakashi Iwai1-3/+4
The quirk argument itself was used as iterator, so it cannot be taken back to the original value, obviously. Fixes: d4b8fc66f770 ('ALSA: usb-audio: Allow multiple entries for the same iface in composite quirk') Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-10ALSA: pcm: Fix document for snd_pcm_stop_xrun()Takashi Iwai1-1/+0
Fix a copy & paste error: Warning(sound/core/pcm_native.c:1112): Excess function parameter 'state' description in 'snd_pcm_stop_xrun' The state argument was dropped from snd_pcm_stop_xrun(). Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-09ALSA: usb-audio: Allow multiple entries for the same iface in composite quirkTakashi Iwai1-1/+9
Currently the composite quirk doesn't work when multiple entries are assigned to the same interface because it marks the interface as claimed then checks whether the interface has been already claimed for the secondary entry. But, if you look at the code, you'll notice that multiple entries are allowed if the entry is the current interface; i.e. the current behavior is anyway inconsistent, and this is an unintended shortcoming. This patch fixes the problem by marking the relevant interfaces as claimed after applying the all composite entries. This fix will be needed for the upcoming enhancements for Digidesign Mbox 1 quirks. Reviewed-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-09ALSA: pcm: Add snd_pcm_stop_xrun() helperTakashi Iwai13-75/+44
Add a new helper function snd_pcm_stop_xrun() to the standard sequnce lock/snd_pcm_stop(XRUN)/unlock by a single call, and replace the existing open codes with this helper. The function checks the PCM running state to prevent setting the wrong state, too, for more safety. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-07ALSA: snd_ctl_activate_id(): Fix index look-upLars-Peter Clausen1-1/+1
We want to know the offset for the id that was passed to the function, not the offset of the first id of the control (which is always 0). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-06ALSA: usb-audio: Trigger PCM XRUN at XRUNTakashi Iwai1-3/+8
The usb-audio driver detects XRUN at its complete callback, but the actual code to trigger PCM XRUN is commented out because it caused deadlock in the past. This patch revives the PCM trigger properly. It resulted in more than just enabling snd_pcm_stop(), but it had to deduce the PCM substream with proper NULL checks and holds the stream lock around the call. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-06ALSA: pcm: Update the state properly before notificationTakashi Iwai1-4/+4
Some state changes (e.g. snd_pcm_stop()) sets the runtime state after calling snd_timer_notify(). This is basically racy, since the notification may wakes up the user even before the state change. Although the possibility is low, we should set the state before the notifications. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-05Merge branch 'for-linus' into for-nextTakashi Iwai4-35/+62
This merges the USB-audio disconnect fix and resolves the conflicts so that we can continue working on development of usb-audio stuff. Conflicts: sound/usb/card.c
2014-11-05ALSA: usb-audio: Fix device_del() sysfs warnings at disconnectTakashi Iwai1-2/+7
Some USB-audio devices show weird sysfs warnings at disconnecting the devices, e.g. usb 1-3: USB disconnect, device number 3 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 973 at fs/sysfs/group.c:216 device_del+0x39/0x180() sysfs group ffffffff8183df40 not found for kobject 'midiC1D0' Call Trace: [<ffffffff814a3e38>] ? dump_stack+0x49/0x71 [<ffffffff8103cb72>] ? warn_slowpath_common+0x82/0xb0 [<ffffffff8103cc55>] ? warn_slowpath_fmt+0x45/0x50 [<ffffffff813521e9>] ? device_del+0x39/0x180 [<ffffffff81352339>] ? device_unregister+0x9/0x20 [<ffffffff81352384>] ? device_destroy+0x34/0x40 [<ffffffffa00ba29f>] ? snd_unregister_device+0x7f/0xd0 [snd] [<ffffffffa025124e>] ? snd_rawmidi_dev_disconnect+0xce/0x100 [snd_rawmidi] [<ffffffffa00c0192>] ? snd_device_disconnect+0x62/0x90 [snd] [<ffffffffa00c025c>] ? snd_device_disconnect_all+0x3c/0x60 [snd] [<ffffffffa00bb574>] ? snd_card_disconnect+0x124/0x1a0 [snd] [<ffffffffa02e54e8>] ? usb_audio_disconnect+0x88/0x1c0 [snd_usb_audio] [<ffffffffa015260e>] ? usb_unbind_interface+0x5e/0x1b0 [usbcore] [<ffffffff813553e9>] ? __device_release_driver+0x79/0xf0 [<ffffffff81355485>] ? device_release_driver+0x25/0x40 [<ffffffff81354e11>] ? bus_remove_device+0xf1/0x130 [<ffffffff813522b9>] ? device_del+0x109/0x180 [<ffffffffa01501d5>] ? usb_disable_device+0x95/0x1f0 [usbcore] [<ffffffffa014634f>] ? usb_disconnect+0x8f/0x190 [usbcore] [<ffffffffa0149179>] ? hub_thread+0x539/0x13a0 [usbcore] [<ffffffff810669f5>] ? sched_clock_local+0x15/0x80 [<ffffffff81066c98>] ? sched_clock_cpu+0xb8/0xd0 [<ffffffff81070730>] ? bit_waitqueue+0xb0/0xb0 [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore] [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore] [<ffffffff8105973e>] ? kthread+0xce/0xf0 [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0 [<ffffffff814a8b7c>] ? ret_from_fork+0x7c/0xb0 [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0 ---[ end trace 40b1928d1136b91e ]--- This comes from the fact that usb-audio driver may receive the disconnect callback multiple times, per each usb interface. When a device has both audio and midi interfaces, it gets called twice, and currently the driver tries to release resources at the last call. At this point, the first parent interface has been already deleted, thus deleting a child of the first parent hits such a warning. For fixing this problem, we need to call snd_card_disconnect() and cancel pending operations at the very first disconnect while the release of the whole objects waits until the last disconnect call. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80931 Reported-and-tested-by: Tomas Gayoso <tgayoso@gmail.com> Reported-and-tested-by: Chris J Arges <chris.j.arges@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-05ALSA: echoaudio: cleanup of unnecessary messagesSudip Mukherjee18-110/+0
commit "b5b4a41b392960010fccf1f9ccf8334d612bd450" was dereferencing chip after it has been freed. This patch fixes that and at the same time removes some debugging messages, which are unnecessary, as they are just printing information about entry and exit from a function, and which switch-case it is executing. we can easily get from ftrace the information about the entry and exit from a function. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-05Merge branch 'topic/pcm-locking' into for-nextTakashi Iwai5-186/+184
here is a small series of patches for cleaning up / enhancing the PCM core stuff.
2014-11-05ALSA: hda - fix mute led problem for three HP laptopsHui Wang1-3/+0
Without the fix, the mute led can't work on these three machines. After apply this fix, these three machines will fall back on the led control quirk as below, and through testing, the mute led works very well. PIN_QUIRK(0x10ec0282, 0x103c, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED, ALC282_STANDARD_PINS, {0x12, 0x90a60140}, ... BugLink: https://bugs.launchpad.net/bugs/1389497 Tested-by: TieFu Chen <tienfu.chen@canonical.com> Cc: Kailang Yang <kailang@realtek.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-04ALSA: usb-audio: Use strim() instead of open codeTakashi Iwai1-12/+2
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-04ALSA: usb-audio: Pass direct struct pointer instead of list_headTakashi Iwai5-21/+15
Some functions in mixer.c and endpoint.c receive list_head instead of the object itself. This is not obvious and rather error-prone. Let's pass the proper object directly instead. The functions in midi.c still receive list_head and this can't be changed since the object definition isn't exposed to the outside of midi.c, so left as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-04ALSA: usb-audio: Flatten probe and disconnect functionsTakashi Iwai1-45/+30
The usb-audio probe and disconnect functions have been split just for adapting the (new!) API at 2.5 kernel time. We left them until now, partly because we wanted to build with the pretty old kernels in the external alsa-driver tree. But the support of such old kernels has been longly stopped, so it's good time to clean up this mess. One good point by this cleanup is that now the probe function returns a proper error code instead of only -EIO. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-04ALSA: pcm: Add xrun_injection proc entryTakashi Iwai1-0/+33
This patch adds a new proc entry for PCM substreams to inject an XRUN. When a PCM substream is running and any value is written to its xrun_injection proc file, the driver triggers XRUN. This is a useful feature for debugging XRUN and error handling code paths. Note that this entry is enabled only when CONFIG_SND_PCM_XRUN_DEBUG is set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-04ALSA: pcm: Replace PCM hwptr tracking with tracepointsTakashi Iwai3-122/+137
ALSA PCM core has a mechanism tracking the PCM hwptr updates for analyzing XRUNs. But its log is limited (up to 10) and its log output is a kernel message, which is hard to handle. In this patch, the hwptr logging is moved to the tracing infrastructure instead of its own. Not only the hwptr updates but also XRUN and hwptr errors are recorded on the trace log, so that user can see such events at the exact timing. The new "snd_pcm" entry will appear in the tracing events: # ls -F /sys/kernel/debug/tracing/events/snd_pcm enable filter hw_ptr_error/ hwptr/ xrun/ The hwptr is for the regular hwptr update events. An event trace looks like: aplay-26187 [004] d..3 4012.834761: hwptr: pcmC0D0p/sub0: POS: pos=488, old=0, base=0, period=1024, buf=16384 "POS" shows the hwptr update by the explicit position update call and "IRQ" means the hwptr update by the interrupt, i.e. snd_pcm_period_elapsed() call. The "pos" is the passed ring-buffer offset by the caller, "old" is the previous hwptr, "base" is the hwptr base position, "period" and "buf" are period- and buffer-size of the target PCM substream. (Note that the hwptr position displayed here isn't the ring-buffer offset. It increments up to the PCM position boundary.) The XRUN event appears similarly, but without "pos" field. The hwptr error events appear with the PCM identifier and its reason string, such as "Lost interrupt?". The XRUN and hwptr error reports on kernel message are still left, can be turned on/off via xrun_debug proc like before. But the bit 3, 4, 5 and 6 bits of xrun_debug proc are dropped by this patch. Also, along with the change, the message strings have been reformatted to be a bit more consistent. Last but not least, the hwptr reporting is enabled only when CONFIG_SND_PCM_XRUN_DEBUG is set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-04ALSA: pcm: Correct PCM BUG error messageTakashi Iwai1-1/+1
While converting to dev_*(), the message showing the invalid PCM position was wrongly tagged as if an XRUN although it's actually a BUG. This patch corrects the message again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-04ALSA: es18xx: Add GPO controlsOndrej Zary1-10/+42
Add GPO0 and GPO1 (General Purpose Outputs) controls to mixer. These can be used on some cards to control amplifier mute (seen in ES1868 datasheet) or additional onboard chips such as QX2130 QXpander processor. These GPOs are present on ES1868, ES1869, ES1887 and ES1888 chips. Tested on ES1868 with QX2130. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-03ALSA: emu10k1: Deletion of unnecessary checks before three function callsMarkus Elfring2-8/+4
The functions kfree(), release_firmware() and snd_util_memhdr_free() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-03ALSA: echoaudio: remove all snd_printkSudip Mukherjee21-283/+327
removed all references of snd_printk with the standard dev_* macro. [a few places degraded to dev_dbg(), too -- tiwai] Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-03ALSA: echoaudio: add reference of struct echoaudioSudip Mukherjee3-7/+9
added reference of struct echoaudio to free_firmware function. this structure will be later used to get a reference of the card when converting snd_printk to dev_* in the next patch of the series. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-31ALSA: pcm: Refactoring snd_pcm_action()Takashi Iwai1-25/+10
Just a small code refactoring to reduce more lines. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-31ALSA: pcm: Simplify snd_pcm_action_lock_irq()Takashi Iwai1-38/+3
The function snd_pcm_action_lock_irq() can be much simplified by simply wrapping snd_pcm_action() with the stream lock. This was rather the original idea, but later it was open coded for optimization. However, looking at the optimization part closely, one notices that the probability of the optimized path is quite low; in normal situations, the linked stream action happens only for the triggered substream, thus the operation becomes identical. So the code simplification has a clear win, especially because we have now doubly codes for both atomic and non-atomic locks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-31Merge branch 'topic/kerneldoc' into for-nextTakashi Iwai6-59/+279
2014-10-30ALSA: doc: More kerneldoc comments on core componentsTakashi Iwai2-13/+29
Some functions missed the proper kerneldoc comments. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30ALSA: pcm: More kerneldoc updatesTakashi Iwai2-2/+66
Add proper kerneldoc comments to the exported functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30ALSA: control: Add missing kerneldoc comments to exported functionsTakashi Iwai1-15/+49
A few functions have no proper documentation yet, so let's add them. Along with it, remove superfluous blank line between the closing brace and EXPORT_SYMBOL() line. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30ALSA: hda - Add kerneldoc comments to hda_generic.cTakashi Iwai1-29/+135
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30ALSA: hda/realtek - Update Initial AMP for EAPD controlKailang Yang1-24/+10
The default EAPD control uses verb command to control EAPD. Some codec does not have verb command for EAPD. It needs to control by hidden register. This update will avoid wrong behavior for some codec. This patch will fix double setup for EAPD. It just needs to turn on by one site for verb command or hidden register controlled. Detailed changes: - alc889_coef_init() is replaced with alc_update_coef_idx() with a correct COEF value. - for ALC262, ALC887 and ALC900, the EAPD setup via the hidden register is removed because this rather conflicts with the EAPD verb setup. - For ALC888-VC, also the hidden register access is removed in alc888_coef_init(). - Remove the dead #if 0 code for ALC267/ALC268. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30ALSA: hda - change three SSID quirks to one pin quirkDavid Henningsson1-3/+13
These three HP machines all have the same pin config, so we can change it to a pin quirk. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30ALSA: hda - Set GPIO 4 low for a few HP machinesDavid Henningsson1-4/+29
These HP machines needs GPIO 4 low to enable the headphone amplifier. In addition, we still need to control LEDs via vref and GPIO. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1387128 Tested-by: TienFu Chen <tienfu.chen@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30Merge branch 'topic/kerneldoc' into for-nextTakashi Iwai7-25/+443
2014-10-30ALSA: es1968: Replace timeval with ktime_tTina Ruchandani1-9/+6
es1968_measure_clock uses struct timeval, which on 32-bit systems will overflow in 2038, leading to incorrect interpretation of time.This patch changes the function to use ktime_t instead of struct timeval, which implies: - no y2038: ktime_t uses a 64-bit datatype explicitly. - efficent subtraction: The earlier version computes the difference in usecs while dealing with secs and nsecs. It requires checks to see if the nsecs of stop is less than start. This patch uses a direct subtract of ktime_t and converts to usecs. - use of monotonic clock (ktime_get) over real time (do_gettimeofday), which simplifies timekeeping, as it does not have to deal with cases where stop_time is less than start_time. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30ALSA: hda - Add ultra dock support for Thinkpad X240.Lukas Bossard1-1/+1
Adding ultra doch support for Lenovo Thinkpad X240 (17aa:2214). [Actually replaced the entry with ALC292_FIXUP_TPT440_DOCK -- tiwai] Signed-off-by: Lukas Bossard <mr.bobukas@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-29ALSA: hda - Add workaround for CMI8888 snoop behaviorTakashi Iwai1-1/+3
CMI8888 shows the stuttering playback when the snooping is disabled on the audio buffer. Meanwhile, we've got reports that CORB/RIRB doesn't work in the snooped mode. So, as a compromise, disable the snoop only for CORB/RIRB and enable the snoop for the stream buffers. The resultant patch became a bit ugly, unfortunately, but we still can live with it. Reported-and-tested-by: Geoffrey McRae <geoff@spacevs.com> Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-29ALSA: hdspm: remove unused variableSudip Mukherjee1-20/+3
removed the unused variables. These variables were only being assigned some value, but the values were never being used. it has been build tested after removing the variables. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-29ALSA: hda - More kerneldoc commentsTakashi Iwai6-19/+297
Put more kerneldoc comments to the exported functions. Still the generic parser code and the HD-audio controller code aren't covered yet, though. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-29ALSA: hda - Correct kerneldoc commentsTakashi Iwai4-6/+146
Complete the missing parameters and fix anything wrong there. Just comment changes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-28ALSA: au88x0: Kill the rest snd_print*()Takashi Iwai1-1/+1
Use the standard dev_*() instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-28ALSA: pcxhr: Kill the rest snd_print*()Takashi Iwai1-21/+21
Use the standard dev_*() instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-28ALSA: ctxfi: Kill the rest snd_print*()Takashi Iwai2-4/+6
Use the standard dev_*() instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-28ALSA: pcxhr: convert timeval to ktime_tAya Mahfouz2-8/+12
This patch is concerned with migrating the time variables in the pcxhr module found in the sound driver. The changes are concerend with the y2038 problem where timeval will overflow in the year 2038. ktime_t was used instead of timeval to get the wall time. The difference is displayed now in nanoseconds instead of microseconds. Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-28ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat modeTakashi Iwai1-0/+2
In compat mode, we copy each field of snd_pcm_status struct but don't touch the reserved fields, and this leaves uninitialized values there. Meanwhile the native ioctl does zero-clear the whole structure, so we should follow the same rule in compat mode, too. Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-27ALSA: hda - Pass printf argument directly to request_module()Takashi Iwai1-6/+4
request_module() handles the printf style arguments, so we don't have to render strings in the caller side. Not only it reduces the unnecessary temporary string buffer, it's even safer from the security POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-27Merge branch 'for-linus' into for-nextTakashi Iwai20-1494/+93
Merged upstream branch to make further fireworks development easier (and avoid conflicts earlier). Conflicts: sound/firewire/bebob/bebob_focusrite.c
2014-10-27ALSA: bebob: Uninitialized id returned by saffirepro_both_clk_src_getChristian Vogel2-17/+63
snd_bebob_stream_check_internal_clock() may get an id from saffirepro_both_clk_src_get (via clk_src->get()) that was uninitialized. a) make logic in saffirepro_both_clk_src_get explicit b) test if id used in snd_bebob_stream_check_internal_clock matches array size [fixed missing signed prefix to *_maps[] by tiwai] Signed-off-by: Christian Vogel <vogelchr@vogel.cx> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-27Merge tag 'asoc-v3.18-rc2' of ↵Takashi Iwai18-1464/+16
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.18 A few small driver fixes for v3.18 plus the removal of the s6000 support since the relevant chip is no longer supported in mainline.
2014-10-27Merge remote-tracking branches 'asoc/fix/adau1761', 'asoc/fix/fsl', ↵Mark Brown13-1459/+7
'asoc/fix/intel', 'asoc/fix/s6000' and 'asoc/fix/sgtl5000' into asoc-linus
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-31 02:35:43 +0300