| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Most of changes at this time are for ASoC, spread over ASoC core and
drivers due to the API prefix standardization.
Other than that, there have little change wrt API, rather lots of
driver-specific updates and fixes.
Some highlight below:
ASoC:
- Standardization of API prefix
- GPIO API usage improvements
- Support for HDA patches
- Lots of work on SOF, including crash dump support
- Fixes for noise when stopping some Sounwire CODECs
- Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
Instruments TAS575x
HD-audio and USB-audio:
- Deferred probe support of audio component binding
- More fixes and enhancements for Cirrus subcodecs
- USB Scarlett2 mixer and McIntosh DSD quirk
Others:
- More enhancement of snd-aloop driver
- Update MAINTAINERS entry for linux-sound mailing list"
* tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (485 commits)
ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp()
ALSA: hda: cs35l41: mark cs35l41_verify_id() static
ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag
ASoC: soc-dai: add flag to mute and unmute stream during trigger
ASoC: ams-delta.c: use component after check
ASoC: amd: acp: select SND_SOC_AMD_ACP_LEGACY_COMMON for ACP63
ASoC: codecs: aw88399: fix typo in Kconfig select
ASoC: amd: acp: add ACPI dependency
ASoC: Intel: avs: Add rt5514 machine board
ASoC: Intel: avs: Add rt5514 machine board
ALSA: scarlett2: Add missing check with firmware version control
ALSA: virtio: use ack callback
ALSA: scarlett2: Remap Level Meter values
ALSA: scarlett2: Allow passing any output to line_out_remap()
ALSA: scarlett2: Add support for reading firmware version
ALSA: scarlett2: Rename Gen 3 config sets
ALSA: scarlett2: Rename scarlett_gen2 to scarlett2
ASoC: cs35l41: Detect CSPL errors when sending CSPL commands
ALSA: hda: cs35l41: Check CSPL state after loading firmware
ALSA: hda: cs35l41: Do not unload firmware before reset in system suspend
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
evaluation to learn device characteristics (Andy Shevchenko)
- Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
definition (Ilpo Järvinen)
- Simplify config access error checking in various drivers (Ilpo
Järvinen)
- Use pcie_capability_clear_word() (not
pcie_capability_clear_and_set_word()) when only clearing (Ilpo
Järvinen)
- Add pci_get_base_class() to simplify finding devices using base
class only (ignoring subclass and programming interface) (Sui
Jingfeng)
- Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
devices from before the Class Code was added to PCI (Sui Jingfeng)
- Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
include ancient VGA devices (Sui Jingfeng)
Resource management:
- Make pci_assign_unassigned_resources() non-init because sparc uses
it after init (Randy Dunlap)
Driver binding:
- Retain .remove() and .probe() callbacks (previously __init) because
sysfs may cause them to be called later (Uwe Kleine-König)
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
it can be claimed by dwc3 instead (Vicki Pfau)
PCI device hotplug:
- Add Ampere Altra Attention Indicator extension driver for acpiphp
(D Scott Phillips)
Power management:
- Quirk VideoPropulsion Torrent QN16e with longer delay after reset
(Lukas Wunner)
- Prevent users from overriding drivers that say we shouldn't use
D3cold (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
because wakeup interrupts from those states don't work if amd-pmc
has put the platform in a hardware sleep state (Mario Limonciello)
IOMMU:
- Disable ATS for Intel IPU E2000 devices with invalidation message
endianness erratum (Bartosz Pawlowski)
Error handling:
- Factor out interrupt enable/disable into helpers (Kai-Heng Feng)
Peer-to-peer DMA:
- Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
ever use pagemaps with multiple entries (Gustavo A. R. Silva)
ASPM:
- Revert a change that broke when drivers disabled L1 and users later
enabled an L1.x substate via sysfs, and fix a similar issue when
users disabled L1 via sysfs (Heiner Kallweit)
Endpoint framework:
- Fix double free in __pci_epc_create() (Dan Carpenter)
- Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)
Cadence PCIe controller driver:
- Drop unused "is_rc" member (Li Chen)
Freescale Layerscape PCIe controller driver:
- Enable 64-bit addressing in endpoint mode (Guanhua Gao)
Intel VMD host bridge driver:
- Fix multi-function header check (Ilpo Järvinen)
Microsoft Hyper-V host bridge driver:
- Annotate struct hv_dr_state with __counted_by (Kees Cook)
NVIDIA Tegra194 PCIe controller driver:
- Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
Shimoda)
Qualcomm PCIe controller driver:
- Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
(Manivannan Sadhasivam)
- Add a .write_dbi2() callback so DBI2 register writes, e.g., for
setting the BAR size, work correctly (Manivannan Sadhasivam)
- Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
doesn't enable ASPM states that haven't been enabled by the
firmware (Manivannan Sadhasivam)
Renesas R-Car Gen4 PCIe controller driver:
- Add DesignWare core support (set max link width, EDMA_UNROLL flag,
.pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
controller in both host and endpoint mode (Yoshihiro Shimoda)
Xilinx NWL PCIe controller driver:
- Update ECAM size to support 256 buses (Thippeswamy Havalige)
- Stop setting bridge primary/secondary/subordinate bus numbers,
since PCI core does this (Thippeswamy Havalige)
Xilinx XDMA controller driver:
- Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
Xilinx XDMA Soft IP (Thippeswamy Havalige)
Miscellaneous:
- Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
macros (Ilpo Järvinen, Bjorn Helgaas)
- Remove logic_outb(), _outw(), outl() duplicate declarations (John
Sanpe)
- Replace unnecessary UTF-8 in Kconfig help text because menuconfig
doesn't render it correctly (Liu Song)"
* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
PCI: endpoint: Fix double free in __pci_epc_create()
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
PCI/AER: Factor out interrupt toggling into helpers
PCI: acpiphp: Allow built-in drivers for Attention Indicators
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
...
|
|
When firmware status is invalid, assign -EINVAL to ret as ret is '0' at
that point and returning success is incorrect when firmware status is
invalid.
Fixes: a51d8ba03a4f ("ALSA: hda: cs35l41: Check CSPL state after loading firmware")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20231030070836.3234385-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.7
More updates for v6,7 following the early merge request:
- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.
|
|
Pull 6.7 materials
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull iov_iter updates from Christian Brauner:
"This contain's David's iov_iter cleanup work to convert the iov_iter
iteration macros to inline functions:
- Remove last_offset from iov_iter as it was only used by ITER_PIPE
- Add a __user tag on copy_mc_to_user()'s dst argument on x86 to
match that on powerpc and get rid of a sparse warning
- Convert iter->user_backed to user_backed_iter() in the sound PCM
driver
- Convert iter->user_backed to user_backed_iter() in a couple of
infiniband drivers
- Renumber the type enum so that the ITER_* constants match the order
in iterate_and_advance*()
- Since the preceding patch puts UBUF and IOVEC at 0 and 1, change
user_backed_iter() to just use the type value and get rid of the
extra flag
- Convert the iov_iter iteration macros to always-inline functions to
make the code easier to follow. It uses function pointers, but they
get optimised away
- Move the check for ->copy_mc to _copy_from_iter() and
copy_page_from_iter_atomic() rather than in memcpy_from_iter_mc()
where it gets repeated for every segment. Instead, we check once
and invoke a side function that can use iterate_bvec() rather than
iterate_and_advance() and supply a different step function
- Move the copy-and-csum code to net/ where it can be in proximity
with the code that uses it
- Fold memcpy_and_csum() in to its two users
- Move csum_and_copy_from_iter_full() out of line and merge in
csum_and_copy_from_iter() since the former is the only caller of
the latter
- Move hash_and_copy_to_iter() to net/ where it can be with its only
caller"
* tag 'vfs-6.7.iov_iter' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
iov_iter, net: Move hash_and_copy_to_iter() to net/
iov_iter, net: Merge csum_and_copy_from_iter{,_full}() together
iov_iter, net: Fold in csum_and_memcpy()
iov_iter, net: Move csum_and_copy_to/from_iter() to net/
iov_iter: Don't deal with iter->copy_mc in memcpy_from_iter_mc()
iov_iter: Convert iterate*() to inline funcs
iov_iter: Derive user-backedness from the iterator type
iov_iter: Renumber ITER_* constants
infiniband: Use user_backed_iter() to see if iterator is UBUF/IOVEC
sound: Fix snd_pcm_readv()/writev() to use iov access functions
iov_iter, x86: Be consistent about the __user tag on copy_mc_to_user()
iov_iter: Remove last_offset from iov_iter as it was for ITER_PIPE
|
|
The newly introduced function is global but only called in this one
file and has no extern prototype, so it should probably be static:
sound/pci/hda/cs35l41_hda.c:733:5: error: no previous prototype for 'cs35l41_verify_id' [-Werror=missing-prototypes]
733 | int cs35l41_verify_id(struct cs35l41_hda *cs35l41, unsigned int *regid, unsigned int *reg_revid)
Fixes: 881b7bce0c25 ("ALSA: hda: cs35l41: Run boot process during resume callbacks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231027152515.482411-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This was sent too late to actually make it for v6.6 but was sent against
v6.6 so merge it up here.
|
|
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
There are machines which use codec rt5514 as DMIC, add support for them.
|
|
In the current setup the PA is left unmuted even when the
Soundwire ports are not started streaming. This can lead to click
and pop sounds during start.
There is a same issue in the reverse order where in the PA is
left unmute even after the data stream is stopped, the time
between data stream stopping and port closing is long enough
to accumulate DC on the line resulting in Click/Pop noise
during end of stream.
making use of new mute_unmute_on_trigger flag is helping a
lot with this Click/Pop issues reported on this Codec
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In some setups like Speaker amps which are very sensitive, ex: keeping them
unmute without actual data stream for very short duration results in a
static charge and results in pop and clicks. To minimize this, provide a way
to mute and unmute such codecs during trigger callbacks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
static void cx81801_close()
{
...
(A) struct snd_soc_dapm_context *dapm = &component->card->dapm;
...
(B) if (!component)
return;
}
(A) uses component before NULL check (B). This patch moves it after (B).
Fixes: d0fdfe34080c ("ASoC: cx20442: replace codec to component")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/3e608474-e99a-4866-ae98-3054a4221f09@moroto.mountain
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ttqdq623.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Without this dependency, acp63 fails to link:
x86_64-linux-ld: sound/soc/amd/acp/acp63.o: in function `acp63_audio_remove':
acp63.c:(.text+0x22): undefined reference to `acp_disable_interrupts'
x86_64-linux-ld: sound/soc/amd/acp/acp63.o: in function `acp63_i2s_master_clock_generate.isra.0':
acp63.c:(.text+0x6f): undefined reference to `smn_read'
x86_64-linux-ld: acp63.c:(.text+0x81): undefined reference to `smn_write'
x86_64-linux-ld: acp63.c:(.text+0x8e): undefined reference to `smn_read'
x86_64-linux-ld: sound/soc/amd/acp/acp63.o: in function `acp63_pcm_resume':
acp63.c:(.text+0x230): undefined reference to `restore_acp_i2s_params'
x86_64-linux-ld: acp63.c:(.text+0x23d): undefined reference to `restore_acp_pdm_params'
x86_64-linux-ld: sound/soc/amd/acp/acp63.o: in function `acp63_audio_probe':
acp63.c:(.text+0x474): undefined reference to `acp_enable_interrupts'
Fixes: d4c2d5391d7e ("ASoC: amd: acp: add Kconfig options for acp6.3 based platform driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231027152403.386257-3-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The aw88395_lib module is shared by all the aw883* drivers that
need to select the corresponding Kconfig symbol. The newly added
aw88399 incorrectly selects SND_SOC_AW88399_LIB instead, which
is not defined anywhere in the kernel, causing a link failure when
the actual one is missing:
arm-linux-gnueabi-ld: sound/soc/codecs/aw88399.o: in function `aw88399_codec_probe':
aw88399.c:(.text+0xbc6): undefined reference to `aw88395_dev_load_acf_check'
arm-linux-gnueabi-ld: aw88399.c:(.text+0xbea): undefined reference to `aw88395_dev_cfg_load'
Fixes: 8ade6cc7e261 ("ASoC: codecs: Add aw88399 amplifier driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231027152403.386257-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A newly added function requires CONFIG_ACPI to avoid a build error:
sound/soc/amd/acp/acp-legacy-common.c: In function 'check_acp_pdm':
sound/soc/amd/acp/acp-legacy-common.c:401:19: error: implicit declaration of function 'acpi_find_child_device'; did you mean 'acpi_match_device'? [-Werror=implicit-function-declaration]
401 | pdm_dev = acpi_find_child_device(ACPI_COMPANION(&pci->dev), pdm_addr, 0);
| ^~~~~~~~~~~~~~~~~~~~~~
| acpi_match_device
The acp drivers really only work when ACPI is enabled already, so just
avoid the build failure with hard dependency in everything that
enables the acp-legacy-common portion.
Fixes: 3a94c8ad0aae ("ASoC: amd: acp: add code for scanning acp pdm controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231027152403.386257-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order to support Eve chromebooks add rt5514 configuration to board
lookup table. rt5514 is used for capture in DMIC configuration on SSP 0
and TDM 1.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231027110537.2103712-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support AVS-rt5514 configuration add machine board connecting AVS
platform component driver with rt5514 codec one.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231027110537.2103712-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
scarlett2_add_firmware_version_ctl() may return an error, but the
return value was not being checked. Add the missing check.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 701949cc0128 ("ALSA: scarlett2: Add support for reading firmware version")
Link: https://lore.kernel.org/r/ZTuKcXajVnuelBEb@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit uses the ack() callback to determine when a buffer has been
updated, then exposes it to guest.
The current mechanism splits a dma buffer into descriptors that are
exposed to the device. This dma buffer is shared with the user
application. When the device consumes a buffer, the driver moves the
request from the used ring to available ring.
The driver exposes the buffer to the device without knowing if the
content has been updated from the user. The section 2.8.21.1 of the
virtio spec states that: "The device MAY access the descriptor chains
the driver created and the memory they refer to immediately". If the
device picks up buffers from the available ring just after it is
notified, it happens that the content may be old.
When the ack() callback is invoked, the driver exposes only the buffers
that have already been updated, i.e., enqueued in the available ring.
Thus, the device always picks up a buffer that is updated.
For capturing, the driver starts by exposing all the available buffers
to device. After device updates the content of a buffer, it enqueues it
in the used ring. It is only after the ack() for capturing is issued
that the driver re-enqueues the buffer in the available ring.
Co-developed-by: Anton Yakovlev <anton.yakovlev@opensynergy.com>
Signed-off-by: Anton Yakovlev <anton.yakovlev@opensynergy.com>
Signed-off-by: Matias Ezequiel Vara Larsen <mvaralar@redhat.com>
Link: https://lore.kernel.org/r/ZTjkn1YAFz67yfqx@fedora
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The values previously returned by the Level Meter control were passed
through from the interface without interpretation, but it has been
discovered that the order of the values matches the mux assignment
order (which is not presented to userspace). In addition, the values
for disabled mux outputs, and mux outputs which share a source are
invalid.
This patch adds a per-device meter_map[], and a dynamic
meter_level_map[] which is updated on routing changes. The meter level
map gets used by scarlett2_meter_ctl_get() to both present the values
in a standard order, and to fix up the invalid values by zeroing them
(for disabled outputs) and copying them (for mux outputs which share a
source).
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/d437ace603eff685d2e0c3d0960589d7a09dd647.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Line outputs 3 & 4 on the Gen 3 18i8 are internally the analogue 7 and
8 outputs, and this renumbering is hidden from the user by
line_out_remap(). By allowing higher values (representing non-analogue
outputs) to be passed to line_out_remap(), repeated code from
scarlett2_mux_src_enum_ctl_get() and scarlett2_mux_src_enum_ctl_put()
can be removed.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/3b70267931f5994628ab27306c73cddd17b93c8f.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The 84 bytes read during initialisation step 2 were previously
ignored. This patch retrieves the firmware version from bytes 8-11,
stores it in the scarlett2_data struct, and makes it available
through a new control "Firmware Version".
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/e76cd80c3445769e60c95df12c4635fc8abfe5c7.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The config sets are named NO_MIXER, GEN_2, GEN_3, and CLARETT
currently. Rename NO_MIXER and GEN_3 to GEN_3A and GEN_3B respectively
as NO_MIXER is only for the smaller Gen 3 devices.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/19ae5eea7fc499945efa8eeda7fcd8afe73f62d9.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This driver was originally developed for the Focusrite Scarlett Gen 2
series. Since then Focusrite have used a similar protocol for their
Gen 3, Gen 4, Clarett USB, Clarett+, and Vocaster series.
Let's call this common protocol the "Scarlett 2 Protocol" and rename
the driver to scarlett2 to not imply that it is restricted to Gen 2
series devices.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/e1ad7f69a1e20cdb39094164504389160c1a0a0b.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Hans de Goede <hdegoede@redhat.com>:
Hi Mark,
As requested here is a v2 of my series to add various quirks
to the bytcr_wm5102 Intel board driver to make it more flexible.
Changes in v2:
- Dropped 2 already merged patches
- Rebased on top of broonie/sound/for-6.7
Regards,
Hans
Hans de Goede (4):
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_SSP2 quirk
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_MCLK_19_2MHZ quirk
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_OUT_MAP quirk
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_IN_MAP quirk
sound/soc/intel/boards/bytcr_wm5102.c | 229 +++++++++++++++++++++++---
1 file changed, 202 insertions(+), 27 deletions(-)
--
2.41.0
|
|
Merge series from Nikita Travkin <nikita@trvn.ru>:
Some devices, such as Acer Aspire 1, can't use lpass dirrectly, but
instead must use adsp core to play sound. Since otherwise the hardware
is, usually, very similar across the devices on the same platform, it
makes sense to reuse the same boardfile.
This series refactors the sc7180.c slightly and adds the functions to
control clocks via adsp instead of controlling the hardware directly.
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Some codec drivers compare widget names with strcmp, ignoring
the component name prefix. If prefix is used, the comparisons start failing.
Except Qualcomm lpass-rx-macro, none of the patches were tested
on hardware.
|
|
Merge series from wangweidong.a@awinic.com:
Add the awinic,aw88399 property to the awinic,aw88395.yaml file.
Add i2c and amplifier registration for
aw88399 and their associated operation functions.
|
|
The existing code checks for the correct state transition after sending
a command. However, it is possible for the message box to return -1,
which indicates an error, if an error has occurred in the firmware.
We can detect if the error has occurred, and return a different error.
In addition, there is no recovering from a CSPL error, so the retry
mechanism is not needed in this case, and we can return immediately.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231026150558.2105827-9-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
CSPL firmware should be in RUNNING or PAUSED state after loading.
If not, the firmware has not been loaded correctly, and we can unload
it and pass the error up.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-8-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Given the part is about to reset due to system suspend, and we are
already in hibernate, there is no need to wake up the amp, just to get
it ready to be reset. We just need to ensure cs_dsp is ready for reset
by resetting the states.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-7-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
To ensure the chip has correctly reset during probe and system suspend,
we need to force a software reset, in case of systems where the
hardware reset is not available.
The software reset register was labelled as volatile but not readable,
however, it is readable, (just returns 0x0). Adding it to readable
registers means it will be correctly treated as volatile, and thus
will not be cached.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-6-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
During initial probe, after reset is asserted for the first time, the
driver goes through a boot process to ensure the amp is ready to be
used. This involves verifying a boot flag, as well as verifying the
chip ids.
This is necessary since it is possible for the amp to have been fully
reset by the system suspend calls.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-5-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
resume
To ensure we are in a known state, exiting from reset at the point of
probe or in system resume, assert reset before we de-assert it.
Since the BIOS may enter into a pre-boot environment to control the
amps (for example for boot beep), we need to ensure we start from a
known, reset state prior to probe or system resume.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some system suspend modes may remove power supplies.
To ensure we are not running during this time, we should assert reset.
Note: since the amps use a shared reset, asserting reset prior to
system suspend only works if the amps are suspended in the reverse
order to probe.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This laptop has an incorrect setting in its _DSD for boost type, but
the rest of the _DSD is correct, and we can still use the reset label
to obtain the reset gpio.
Also fix channel map so that amp 0 is right, and amp 1 is left.
Fixes: 581523ee3652 ("ALSA: hda: cs35l41: Override the _DSD for HP Zbook Fury 17 G9 to correct boost type")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Error path in snd_skl_parse_uuids() shall free last allocated module if
its instance_id allocation fails.
Fixes: f8e066521192 ("ASoC: Intel: Skylake: Fix uuid_module memory leak in failure case")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231026082558.1864910-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231023095428.166563-18-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231023095428.166563-17-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231023095428.166563-16-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20231023095428.166563-15-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231023095428.166563-14-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231023095428.166563-13-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231023095428.166563-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231023095428.166563-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231023095428.166563-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231023095428.166563-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231023095428.166563-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231023095428.166563-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
