summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky2-4/+4
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-12Merge tag 'sound-3.12' of ↵Linus Torvalds10-45/+168
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few last-minute fixes for 3.12-rc1. All patches are driver specific. - HD-audio fixes: MacBook 6,1/6,2 speaker fix, ASUS TX300 dock speaker fix, Toshiba Satellite irq fix, Haswell HDMI audio cleanups) - ASoC fixes: atmel irq fix, fsl DT fix, mc13783 spi fix, kirkwood compatible string change, etc" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: mc13783: add spi errata fix ASoC: rsnd: fixup flag name of rsnd_scu_platform_info ALSA: hda - Add CS4208 codec support for MacBook 6,1 and 6,2 ALSA: hda - Add Toshiba Satellite C870 to MSI blacklist ASoC: fsl_spdif: Select regmap-mmio ALSA: hda - unmute pin amplifier in infoframe setup for Haswell ALSA: hda - define is_haswell() to check if a display audio codec is Haswell ALSA: hda - Add dock speaker support for ASUS TX300 ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver ASoC: atmel: disable error interrupt ASoC: fsl: imx-audmux: Do not call imx_audmux_parse_dt_defaults() on non-dt kernel
2013-09-11Merge tag 'asoc-v3.12-4' of ↵Takashi Iwai9-11/+18
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.12 A few small fixes, nothing with any broad impact but all useful for the affected systems. The Kirkwood compatible string change is fixing up a string just added in the merge window so that we don't get any changes in released kernels.
2013-09-11Merge remote-tracking branch 'asoc/fix/rsnd' into asoc-linusMark Brown1-2/+2
2013-09-11Merge remote-tracking branch 'asoc/fix/mc13783' into asoc-linusMark Brown1-0/+4
2013-09-11Merge remote-tracking branch 'asoc/fix/kirkwood' into asoc-linusMark Brown1-1/+2
2013-09-11Merge remote-tracking branch 'asoc/fix/fsl' into asoc-linusMark Brown53-5005/+2068
2013-09-11Merge remote-tracking branch 'asoc/fix/atmel' into asoc-linusMark Brown152-2013/+9268
2013-09-11ASoC: mc13783: add spi errata fixSteffen Trumtrar1-0/+4
The MC13783 Chip Errata, Rev. 4 says, that depending on SPI clock and main audio clock speed, the Audio Codec or Stereo DAC do sometimes not start when programmed to do so. This is due to an internal clock timing issue related to the loading of the SPI bits into the audio block. On an i.MX27 based system, this issue lead to switched audio channels under certain circumstances: RTC + Touch + Audio are used and loaded at startup. The mentioned workaround of writing registers 40 and 41 two times is implemented here. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-09ASoC: rsnd: fixup flag name of rsnd_scu_platform_infoKuninori Morimoto1-2/+2
it should be *USE*, not *USB* Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-09ALSA: hda - Add CS4208 codec support for MacBook 6,1 and 6,2Takashi Iwai1-7/+82
MacBook 6,1 and 6,2 have a CS4208 codec instead of CS4206/CS4207 on the former models. Most of functions work fine as is, except for the silent speaker output. After debugging sessions, it turned out that the machine needs to set GPIO 0 for the speaker amp. This patch adds the basic support for CS4208 and the fixup for these MacBooks. Basically the codec works just with the generic parser. For re-using the existing GPIO amp code and init/free callbacks, a few places have been changed so that CS4206/4207-specific codes (errata, etc) won't hit with CS4208. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60811 Reported-and-tested-by: Imre Kaloz <kaloz@openwrt.org> Reported-and-tested-by: Ian Munsie <darkstarsword@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-09ALSA: hda - Add Toshiba Satellite C870 to MSI blacklistTakashi Iwai1-0/+1
Toshiba Satellite C870 shows interrupt problems occasionally when certain mixer controls like "Mic Switch" is toggled. This seems worked around by not using MSI. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=833585 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-08ASoC: fsl_spdif: Select regmap-mmioMark Brown1-0/+1
The S/PDIF driver needs regmap so select it to make sure it gets included in the build. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "The usual trivial updates all over the tree -- mostly typo fixes and documentation updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits) doc: Documentation/cputopology.txt fix typo treewide: Convert retrun typos to return Fix comment typo for init_cma_reserved_pageblock Documentation/trace: Correcting and extending tracepoint documentation mm/hotplug: fix a typo in Documentation/memory-hotplug.txt power: Documentation: Update s2ram link doc: fix a typo in Documentation/00-INDEX Documentation/printk-formats.txt: No casts needed for u64/s64 doc: Fix typo "is is" in Documentations treewide: Fix printks with 0x%# zram: doc fixes Documentation/kmemcheck: update kmemcheck documentation doc: documentation/hwspinlock.txt fix typo PM / Hibernate: add section for resume options doc: filesystems : Fix typo in Documentations/filesystems scsi/megaraid fixed several typos in comments ppc: init_32: Fix error typo "CONFIG_START_KERNEL" treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks page_isolation: Fix a comment typo in test_pages_isolated() doc: fix a typo about irq affinity ...
2013-09-06ALSA: hda - unmute pin amplifier in infoframe setup for HaswellMengdong Lin1-27/+9
When Gfx driver reconnects a port and transcoder, the pin amplifier will be muted. To enable sound, the pin amp need to be unmuted. This patch - moves pin amp unmuting from stream preparing to hdmi_setup_audio_infoframe(). So if port:transcoder reconnection happens during stream playback, the ELDV unsol event can stil trigger pin's amp unmuting when re-setting up audio info frame. - remove reading pin amp status before unmuting for speed-up, since pin amp should always be unmuted. - rename haswell_verify_pin_D0() to haswell_verify_D0(), since the convertor power state is also fixed here. This patch is mostly based on suggestion of David Henningsson. Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-06ALSA: hda - define is_haswell() to check if a display audio codec is HaswellMengdong Lin1-6/+8
To apply Haswell specific fixings, this patch defines is_haswell() to check whether a display audio codec is Haswell, to avoid explicitly checking Haswell vendor ID everywhere. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-06ALSA: hda - Add dock speaker support for ASUS TX300Takashi Iwai1-0/+56
ASUS TX300 has a built-in speaker in the tablet part and in the dock part, and the tablet speaker is supposed to be unused while the machine is docked. The current HD-audio driver, however, doesn't support the dock speaker, partly because BIOS doesn't set up the pin for the corresponding output. But, not only the missing pin config, also the missing unsol event handling is another issue. Otherwise the automatic switching via dock/undock won't work. Through debugging sessions, we found out that the dock speaker pin is NID 0x1b, and it generates an unsol event at docking/undocking, the docking state can be inquired via the normal pin detection verb. Also, it's turned out that GPIO 2 is needed as an amp. So, all materials are ready to cook. This patch provides the basic dock speaker support with TX300: - The dock speaker is turned on/off via "Dock Speaker" mixer mute. - The dock speaker is automatically muted when docked. This is independently from the mixer mute switch, just like the headphone auto-mute function. The implementation is a bit tricky. Since we want to handle it as a secondary speaker, we set it up a pin as a speaker with a jack detection. Then, the fixup function registers the own unsol callback for this pin because the standard automute can't handle the thing like a "speaker jack". In the own automute hook, we apply the mute of the tablet speaker in addition by checking the dock state. Also, the speaker control names are slightly shuffled because the generic parser doesn't give good names but blindly assumes a bass speaker as a secondary speaker. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59791 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-06ASoC: kirkwood: change the compatible string of the kirkwood-i2s driverThomas Petazzoni1-1/+2
The compatible string of the kirkwood-i2s driver was chosen as "marvell,mvebu-audio". Using such a compatible string is not a good idea, since "mvebu" is the name of a large family of SOCs, in which new, unknown SOCs will be coming in the future. It is therefore impossible to know what will be evolutions of this hardware block in the next generations of the SOCs. For this reason, the recommandation for compatible strings of on-SOCs devices has always been to use the name of the oldest SOC that has the hardware block. New SOCs that have an exactly compatible hardware block can reference it using the same compatible string. See [1], [2] and [3] for various cases were this suggestion was made, including from Rob Herring, a Device Tree binding maintainer. As an example, there are already small differences between current generations: * On Kirkwood, only one interrupt is used for audio. * On Dove, two interrupts are used, one for audio data and one for error reporting. In the near future, I'll be adding audio support to Armada 370, which allows has the same hardware block (but maybe with minor variants). Therefore, this patch changes the driver to accept "marvell,kirkwood-audio" and "marvell,dove-audio" as compatible strings instead of the too-generic "marvell,mvebu-audio". The reason for the two different compatible strings is the difference in the number of interrupts used by the two SOCs for audio. This Device Tree binding has never been part of a Linux kernel stable release so far, so it can be changed now without breaking backward compatibility. [1] http://lists.infradead.org/pipermail/linux-mtd/2012-March/040417.html [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/161065.html [3] http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/087702.html Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-05Merge branch 'v4l_for_linus' of ↵Linus Torvalds5-586/+9
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This series contains: - Exynos s5p-mfc driver got support for VP8 encoder - Some SoC drivers gained support for asynchronous registration (needed for DT) - The RC subsystem gained support for RC activity LED; - New drivers added: a video decoder(adv7842), a video encoder (adv7511), a new GSPCA driver (stk1135) and support for Renesas R-Car (vsp1) - the first SDR kernel driver: mirics msi3101. Due to some troubles with the driver, and because the API is still under discussion, it will be merged at staging for 3.12. Need to rework on it - usual new boards additions, fixes, cleanups and driver improvements" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (242 commits) [media] cx88: Fix regression: CX88_AUDIO_WM8775 can't be 0 [media] exynos4-is: Fix entity unregistration on error path [media] exynos-gsc: Register v4l2 device [media] exynos4-is: Fix fimc-lite bayer formats [media] em28xx: fix assignment of the eeprom data [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe() [media] usbtv: Throw corrupted frames away [media] usbtv: Fix deinterlacing [media] v4l2: added missing mutex.h include to v4l2-ctrls.h [media] DocBook: upgrade media_api DocBook version to 4.2 [media] ml86v7667: fix compile warning: 'ret' set but not used [media] s5p-g2d: Fix registration failure [media] media: coda: Fix DT driver data pointer for i.MX27 [media] s5p-mfc: Fix input/output format reporting [media] v4l: vsp1: Fix mutex double lock at streamon time [media] v4l: vsp1: Add support for RT clock [media] v4l: vsp1: Initialize media device bus_info field [media] davinci: vpif_capture: fix error return code in vpif_probe() [media] davinci: vpif_display: fix error return code in vpif_probe() [media] MAINTAINERS: add entries for adv7511 and adv7842 ...
2013-09-05Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-4/+32
Pull drm tree changes from Dave Airlie: "This is the main drm pull request, I have some overlap with sound and arm-soc, the sound patch is acked and may conflict based on -next reports but should be a trivial fixup, which I'll leave to you! Highlights: - new drivers: MSM driver from Rob Clark - non-drm: switcheroo and hdmi audio driver support for secondary GPU poweroff, so drivers can use runtime PM to poweroff the GPUs. This can save 5 or 6W on some optimus laptops. - drm core: combined GEM and TTM VMA manager per-filp mmap permission tracking initial rendernode support (via a runtime enable for now, until we get api stable), remove old proc support, lots of cleanups of legacy code hdmi vendor infoframes and 4k modes lots of gem/prime locking and races fixes async pageflip scaffolding drm bridge objects - i915: Haswell PC8+ support and eLLC support, HDMI 4K support, initial per-process VMA pieces, watermark reworks, convert to generic hdmi infoframes, encoder reworking, fastboot support, - radeon: CIK PM support, remove 3d blit code in favour of DMA engines, Berlin GPU support, HDMI audio fixes - nouveau: secondary GPU power down support for optimus laptops, lots of fixes, use MSI, VP3 engine support - exynos: runtime pm support for g2d, DT support, remove non-DT, - tda998x i2c driver: lots of fixes for sync issues - gma500: lots of cleanups - rcar: add LVDS support, fbdev emulation, - tegra: just minor fixes" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (684 commits) drm/exynos: Fix build error with exynos_drm_connector.c drm/exynos: Remove non-DT support in exynos_drm_fimd drm/exynos: Remove non-DT support in exynos_hdmi drm/exynos: Remove non-DT support in exynos_drm_g2d drm/exynos: Remove non-DT support in exynos_hdmiphy drm/exynos: Remove non-DT support in exynos_ddc drm/exynos: Make Exynos DRM drivers depend on OF drm/exynos: Consider fallback option to allocation fail drm/exynos: fimd: move platform data parsing to separate function drm/exynos: fimd: get signal polarities from device tree drm/exynos: fimd: replace struct fb_videomode with videomode drm/exynos: check a pixel format to a particular window layer drm/exynos: fix fimd pixel format setting drm/exynos: Add NULL pointer check drm/exynos: Remove redundant error messages drm/exynos: Add missing of.h header include drm/exynos: Remove redundant NULL check in exynos_drm_buf drm/exynos: add device tree support for rotator drm/exynos: Add missing includes drm/exynos: add runtime pm interfaces to g2d driver ...
2013-09-05Merge branch 'i2c/for-next' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Highlights: - OF and ACPI helpers are now included in the core, and not in external files anymore. This removes dependency problems for modules and is cleaner, in general. - mv64xxx-driver gains fifo usage to support mv78230 - imx-driver overhaul to support VF610 - various cleanups, most notably related to devm_* and CONFIG_PM usage - driver bugfixes and smaller feature additions" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits) i2c: rcar: add rcar-H2 support i2c: sirf: retry 3 times as sometimes we get random noack and timeout i2c: sirf: support reverse direction of address i2c: sirf: fix the typo for setting bitrate to less than 100k i2c: sirf: we need to wait I2C_RESET status in resume i2c: sirf: reset i2c controller early after we get a noack i2c: designware: get SDA hold time, HCNT and LCNT configuration from ACPI i2c: designware: make HCNT/LCNT values configurable i2c: mpc: cleanup clock API use i2c: pnx: fix error return code in i2c_pnx_probe() i2c: ismt: add error return code in probe() i2c: mv64xxx: fix typo in binding documentation i2c: imx: use exact SoC revision to document binding i2c: move ACPI helpers into the core i2c: move OF helpers into the core i2c: mv64xxx: Fix timing issue on Armada XP (errata FE-8471889) i2c: mv64xxx: Add I2C Transaction Generator support i2c: powermac: fix return path on error Documentation: i2c: Fix example in instantiating-devices i2c: tiny-usb: do not use stack as URB transfer_buffer ...
2013-09-05Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-09-05Merge tag 'sound-3.12' of ↵Linus Torvalds188-7001/+11349
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Changes are seen in a wide range of codes, mainly due to ASoC DAPM requirements; HD-audio shows a high peak in diffstat, it's just a removal of bunch of old static quirks. Some highlights: - HDPM: Updates for AIO/RayDAT support, TCO/sync support - RME96: Add PCM sync support - HD-audio: * A few HDMI/DP audio updates (CA assignment fix, stream switching fix, Intel DP device list support) * Device specific fixes (ASUS/CXT HP mic support, Thinkpad mic improvements, Chromebook fixes, STAC9228 Dell fixes) * Replace the all static quirks for AD codecs with the generic parser * WAKEEN support for handling irqs in the power saving mode - USB-audio: Clean up implicit fb handling and related codes - DAPM is now mandatory for ASoC CODEC drivers; all existing drivers have had some level of DAPM support added. In addition, a lot of cleanups and improvements in DAPM. - Support for ASoC cross-platform compile test - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a), Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson Microelectronics WM8997 - DT bindings for kirkwood and i.MX S/PDIF - Clean up and bug fixes: ssm2602, rt5640 and sgtl5000. - Core helpers for bitbanged AC'97 reset" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (375 commits) ALSA: hda - Re-setup HDMI pin and audio infoframe on stream switches ALSA: hda - hdmi: Fallback to ALSA allocation when selecting CA ASoC: mxs-sgtl5000: Configure the dai_links as unidirectional ASoC: soc-pcm: Allow to specify unidirectional dai_link ASoC: fsl_spdif: Staticse non-exported symbols ASoC: ssm2602: Fix cache sync ASoC: Remove unused sysfs_registered field from snd_soc_codec struct ASoC: Remove unused debugfs_dapm field from snd_soc_{platform,codec} struct ASoC: Remove unused control_type field from snd_soc_codec struct ASoC: fsl: Add one blank space after ':=' in Makefile ASoC: fsl: Add wrapping for dev_dbg() in fsl_spdif.c ASoC: rt5640: change widget sequence for depop ASoC: dapm: Fix auto-disable for inverted controls ASoC: fsl: Drop SND_SOC_FSL_UTILS from SND_SOC_IMX_SPDIF ASoC: Samsung: Do not queue cyclic buffers multiple times ASoC: ep93xx-i2s: Remove unnecessary dev_set_drvdata() ASoC: designware_i2s: Remove unnecessary dev_set_drvdata() ASoC: fsl_spdif: remove redundant dev_err call in fsl_spdif_probe() ASoC: fsl: Add S/PDIF machine driver ASoc: kirkwood: Use the Kirkwood audio driver in Dove boards ...
2013-09-04ASoC: atmel: disable error interruptBo Shen1-1/+1
As once the error interrupt is triggered, it can not be cleared. So, disable it. No side effect found while testing on sama5d3xek and at91sam9x5ek boards. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04ASoC: fsl: imx-audmux: Do not call imx_audmux_parse_dt_defaults() on non-dt ↵Fabio Estevam1-1/+2
kernel Booting a mx51babbage board with a non-dt kernel leads to the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000001c pgd = 80004000 [0000001c] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.11.0-next-20130903 #287 task: 9f860000 ti: 9f862000 task.ti: 9f862000 PC is at of_get_next_available_child+0x5c/0x68 LR is at of_get_next_available_child+0x1c/0x68 pc : [<8043ea58>] lr : [<8043ea18>] psr: 60000193 sp : 9f863d58 ip : 00000000 fp : 9f863d74 r10: 9f89a010 r9 : 9f862000 r8 : 807bb26c r7 : 80615d5c r6 : 00000000 r5 : 60000113 r4 : 00000000 r3 : 00000000 r2 : 808770a4 r1 : 00000011 r0 : 60000113 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 90004019 DAC: 00000017 Process swapper/0 (pid: 1, stack limit = 0x9f862240) Stack: (0x9f863d58 to 0x9f864000) This is caused by commit 8548a464b9 (ASoC: imx-audmux: Read default configuration from devicetree). In order to fix this, add a check for 'of_id' so that imx_audmux_parse_dt_defaults() only gets called when a dt kernel is running. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-03ALSA: hda - Re-setup HDMI pin and audio infoframe on stream switchesTakashi Iwai1-10/+31
When the transcoder:port mapping on Haswell HDMI/DP audio is changed during the stream playback, the sound gets lost. Typically this problem is seen when the user switches the graphics mode from eDP+DP to DP-only configuration, where CRTC 1 is used for DP in the former while CRTC 0 is used for the latter. The graphics controller notifies the change via the normal ELD update procedure, so we get the intrinsic event. For enabling the sound again, the HDMI audio driver needs to reset the pin and set up the audio infoframe again. This patch achieves it by: - keep the current status of channels and info frame setup in per_pin struct, - check the reconnection in the intrinsic event handler, - reset the pin and the re-invoke hdmi_setup_audio_infoframe() accordingly. The hdmi_setup_audio_infoframe() function has been changed, too, so that it can be invoked without passing the substream instance. The patch is mostly based on the work by Mengdong Lin. Cc: Mengdong Lin <mengdong.lin@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-02Merge tag 'asoc-v3.12-3' of ↵Takashi Iwai8-62/+198
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Final updates for v3.12 A few final updates for v3.12 - some cleanups, a bug fix for ssm2602, pop removal for rt5640 and fixes for the reporting of unidirectional links in the MXS SGTL5000 driver.
2013-09-02ALSA: hda - hdmi: Fallback to ALSA allocation when selecting CAAnssi Hannula1-0/+11
hdmi_channel_allocation() tries to find a HDMI channel allocation that matches the number channels in the playback stream and contains only speakers that the HDMI sink has reported as available via EDID. If no such allocation is found, 0 (stereo audio) is used. Using CA 0 causes the audio causes the sink to discard everything except the first two channels (front left and front right). However, the sink may be capable of receiving more channels than it has speakers (and then perform downmix or discard the extra channels), in which case it is preferable to use a CA that contains extra channels than to use CA 0 which discards all the non-stereo channels. Additionally, it seems that HBR (HD) passthrough output does not work on Intel HDMI codecs when CA is set to 0 (possibly the codec zeroes channels not present in CA). This happens with all receivers that report a 5.1 speaker mask since a HBR stream is carried on 8 channels to the codec. Add a fallback in the CA selection so that the CA channel count at least matches the stream channel count, even if the stream contains channels not present in the sink speaker descriptor. Thanks to GrimGriefer at OpenELEC forums for discovering that changing the sink speaker mask allowed HBR output. Reported-by: GrimGriefer Reported-by: Ashecrow Reported-by: Frank Zafka <kafkaesque1978@gmail.com> Reported-by: Peter Frühberger <fritsch@xbmc.org> Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-02Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie22-57/+159
into drm-next Alex writes: This is the radeon drm-next request. Big changes include: - support for dpm on CIK parts - support for ASPM on CIK parts - support for berlin GPUs - major ring handling cleanup - remove the old 3D blit code for bo moves in favor of CP DMA or sDMA - lots of bug fixes [airlied: fix up a bunch of conflicts from drm_order removal] * 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits) drm/radeon/dpm: make sure dc performance level limits are valid (CI) drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2) drm/radeon: gcc fixes for extended dpm tables drm/radeon: gcc fixes for kb/kv dpm drm/radeon: gcc fixes for ci dpm drm/radeon: gcc fixes for si dpm drm/radeon: gcc fixes for ni dpm drm/radeon: gcc fixes for trinity dpm drm/radeon: gcc fixes for sumo dpm drm/radeonn: gcc fixes for rv7xx/eg/btc dpm drm/radeon: gcc fixes for rv6xx dpm drm/radeon: gcc fixes for radeon_atombios.c drm/radeon: enable UVD interrupts on CIK drm/radeon: fix init ordering for r600+ drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume radeon kms: fix uninitialised hotplug work usage in r100_irq_process() drm/radeon/audio: set up the sads on DCE3.2 asics drm/radeon: fix handling of variable sized arrays for router objects ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_gem_dmabuf.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/radeon/cik.c drivers/gpu/drm/radeon/ni.c drivers/gpu/drm/radeon/r600.c
2013-09-02Merge remote-tracking branch 'asoc/topic/ssm2602' into tmpMark Brown1-1/+2
2013-09-02Merge remote-tracking branch 'asoc/topic/fsl' into tmpMark Brown4-7/+19
2013-09-02Merge remote-tracking branch 'asoc/topic/dapm' into tmpMark Brown3-54/+177
2013-09-01ASoC: mxs-sgtl5000: Configure the dai_links as unidirectionalFabio Estevam1-0/+2
On a mx28 board, running "aplay -l" and "arecord -l" results in the following: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: mxssgtl5000 [mxs_sgtl5000], device 0: Playback sgtl5000-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: mxssgtl5000 [mxs_sgtl5000], device 1: Capture sgtl5000-1 [] Subdevices: 1/1 Subdevice #0: subdevice #0 $ arecord -l **** List of CAPTURE Hardware Devices **** card 0: mxssgtl5000 [mxs_sgtl5000], device 0: Playback sgtl5000-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: mxssgtl5000 [mxs_sgtl5000], device 1: Capture sgtl5000-1 [] Subdevices: 1/1 Subdevice #0: subdevice #0 ,which is not correct because we got a capture device listed in aplay and a playback device listed in arecord. On mx28 there are two serial audio interface ports (SAIF0 and SAIF1) and each one of them are unidirectional. Allow to specify a dai link as 'playback_only' or 'capture_only', which suits well for this case. After this change we can correctly report the capabilities as follows: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: mxssgtl5000 [mxs_sgtl5000], device 0: HiFi Playback sgtl5000-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 $ arecord -l **** List of CAPTURE Hardware Devices **** card 0: mxssgtl5000 [mxs_sgtl5000], device 1: HiFi Capture sgtl5000-1 [] Subdevices: 1/1 Subdevice #0: subdevice #0 Also tested playback and capture on the mx28evk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01ASoC: soc-pcm: Allow to specify unidirectional dai_linkFabio Estevam1-0/+10
Add 'playback_only' and 'capture_only' fields that can be used for specifying that a dai_link has a unidirectional capability. The motivation for this is for the cases of systems, such as Freescale MX28, that has two unidirectional DAIs. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01ASoC: fsl_spdif: Staticse non-exported symbolsMark Brown1-4/+4
Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Nicolin Chen <B42378@freescale.com>
2013-08-31ASoC: ssm2602: Fix cache syncLars-Peter Clausen1-1/+2
The ssm2602 uses regmap for caching not soc-cache, so we need to use regcache_sync() instead of snd_soc_cache_sync(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-31ASoC: fsl: Add one blank space after ':=' in MakefileNicolin Chen1-1/+1
There is a blank space missing between ':=' and 'imx-spdif.o', thus add it. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-31ASoC: fsl: Add wrapping for dev_dbg() in fsl_spdif.cNicolin Chen1-2/+2
Add wrapping '\n' for dev_dbg() in fsl_spdif.c Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30ASoC: rt5640: change widget sequence for depopBard Liao2-54/+175
Signed-off-by: Bard Liao <bardliao@realtek.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30Merge remote-tracking branch 'asoc/topic/rt5640' into asoc-dapmMark Brown1-26/+0
2013-08-30ASoC: dapm: Fix auto-disable for inverted controlsLars-Peter Clausen1-0/+2
We need to make sure that the control's cached value is initialized to the same value as the control's widget->on_val. Otherwise updates might be lost. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30Merge remote-tracking branch 'asoc/topic/wm8904' into tmpMark Brown1-1/+0
2013-08-30Merge remote-tracking branch 'asoc/topic/samsung' into tmpMark Brown1-0/+7
2013-08-30Merge remote-tracking branch 'asoc/topic/kirkwood' into tmpMark Brown2-8/+22
2013-08-30Merge remote-tracking branch 'asoc/topic/fsl' into tmpMark Brown5-15/+163
2013-08-30Merge remote-tracking branch 'asoc/topic/fsi' into tmpMark Brown1-18/+33
2013-08-30Merge remote-tracking branch 'asoc/topic/ep93xx' into tmpMark Brown1-2/+0
2013-08-30Merge remote-tracking branch 'asoc/topic/designware' into tmpMark Brown1-4/+1
2013-08-30Merge remote-tracking branch 'asoc/topic/core' into tmpMark Brown6-42/+19
2013-08-30ASoC: fsl: Drop SND_SOC_FSL_UTILS from SND_SOC_IMX_SPDIFFabio Estevam1-1/+0
SND_SOC_FSL_UTILS is only used by PowerPC machines, so let's drop it in the i.mx case. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>