summaryrefslogtreecommitdiff
path: root/tools/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2021-06-01perf tools: Copy uapi/asm/perf_regs.h from the kernel for MIPSTiezhu Yang1-0/+40
To allow the build to complete on older systems, where those files are either not uptodate, lacking some recent additions or not present at all. And check if the copy drifts from the kernel. This commit is similar with commit 12f020338a2c ("tools: Copy uapi/asm/perf_regs.h from the kernel") With this commit, we can avoid the following build error in any case: tools/perf/arch/mips/include/perf_regs.h:7:10: fatal error: asm/perf_regs.h: No such file or directory #include <asm/perf_regs.h> ^~~~~~~~~~~~~~~~~ compilation terminated. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xuefeng Li <lixuefeng@loongson.cn> Link: http://lore.kernel.org/lkml/1622548436-12472-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-28tools headers uapi: Sync asm-generic/mman-common.h and linux/mman.hArnaldo Carvalho de Melo1-2/+0
To deal with the move of some defines from asm-generic/mmap-common.h to linux/mman.h done in: 746c9398f5ac ("arch: move common mmap flags to linux/mman.h") The generated mmap_flags array stays the same: $ tools/perf/trace/beauty/mmap_flags.sh static const char *mmap_flags[] = { [ilog2(0x40) + 1] = "32BIT", [ilog2(0x01) + 1] = "SHARED", [ilog2(0x02) + 1] = "PRIVATE", [ilog2(0x10) + 1] = "FIXED", [ilog2(0x20) + 1] = "ANONYMOUS", [ilog2(0x100000) + 1] = "FIXED_NOREPLACE", [ilog2(0x0100) + 1] = "GROWSDOWN", [ilog2(0x0800) + 1] = "DENYWRITE", [ilog2(0x1000) + 1] = "EXECUTABLE", [ilog2(0x2000) + 1] = "LOCKED", [ilog2(0x4000) + 1] = "NORESERVE", [ilog2(0x8000) + 1] = "POPULATE", [ilog2(0x10000) + 1] = "NONBLOCK", [ilog2(0x20000) + 1] = "STACK", [ilog2(0x40000) + 1] = "HUGETLB", [ilog2(0x80000) + 1] = "SYNC", }; $ And to have the system's sys/mman.h find the definition of MAP_SHARED and MAP_PRIVATE, make sure they are defined in the tools/ mman-common.h in a way that keeps it the same as the kernel's, need for keeping the Android's NDK cross build working. This silences these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h' diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h' diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-h80ycpc6pedg9s5z2rwpy6ws@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-23tools include arch: Grab a copy of errno.h for arch's supported by perfHendrik Brueckner2-0/+147
For each arch in tools/perf/arch, grab a copy of errno.h. This is a pre-req to generate an architecture specific mapping of errno numbers to their names. This errno mapping can be used by perf trace to support cross-architecture trace reports and to get rid of the audit-libs dependency. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: linux-s390@vger.kernel.org LPU-Reference: 1516352177-11106-2-git-send-email-brueckner@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-73azjhrzpjsskwi129020i2u@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-02License cleanup: add SPDX license identifier to uapi header files with a licenseGreg Kroah-Hartman2-0/+2
Many user space API headers have licensing information, which is either incomplete, badly formatted or just a shorthand for referring to the license under which the file is supposed to be. This makes it hard for compliance tools to determine the correct license. Update these files with an SPDX license identifier. The identifier was chosen based on the license information in the file. GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license identifier with the added 'WITH Linux-syscall-note' exception, which is the officially assigned exception identifier for the kernel syscall exception: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". This exception makes it possible to include GPL headers into non GPL code, without confusing license compliance tools. Headers which have either explicit dual licensing or are just licensed under a non GPL license are updated with the corresponding SPDX identifier and the GPLv2 with syscall exception identifier. The format is: ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE) SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. The update does not remove existing license information as this has to be done on a case by case basis and the copyright holders might have to be consulted. This will happen in a separate step. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX license identifier to uapi header files with no ↵Greg Kroah-Hartman1-0/+1
license Many user space API headers are missing licensing information, which makes it hard for compliance tools to determine the correct license. By default are files without license information under the default license of the kernel, which is GPLV2. Marking them GPLV2 would exclude them from being included in non GPLV2 code, which is obviously not intended. The user space API headers fall under the syscall exception which is in the kernels COPYING file: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". otherwise syscall usage would not be possible. Update the files which contain no license information with an SPDX license identifier. The chosen identifier is 'GPL-2.0 WITH Linux-syscall-note' which is the officially assigned identifier for the Linux syscall exception. SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-19tools include: Add mman macros needed by perf for all archWang Nan1-0/+7
Some macros required by tools/perf/trace/beauty/mmap.c is not support for all architectures. For example, MAP_32BIT is defined on x86 only, alpha doesn't define MADV_HWPOISON and MADV_SOFT_OFFLINE. This patch regenerates mman.h for each arch, defines these missing macros for perf. For missing MADV_*, fall back to asm-generic/mman-common because they are in a 'case ...' statement. For flags, define it to 0. Following is the script to generate this patch: macros=`cat $0 | awk 'V==1 {print}; /^# start macro list/ {V=1}'` rm `find ./tools/arch/ -name mman.h` for arch in `ls tools/arch` do [ -d tools/arch/$arch/include/uapi/asm ] || mkdir -p tools/arch/$arch/include/uapi/asm src=arch/$arch/include/uapi/asm/mman.h target=tools/arch/$arch/include/uapi/asm/mman.h.tmp real_target=tools/arch/$arch/include/uapi/asm/mman.h guard="TOOLS_ARCH_"`echo $arch | awk '{print toupper($0)}'`_UAPI_ASM_MMAN_FIX_H rm -f $target [ -f $src ] && for m in $macros do if grep '#define[ \t]*'$m $src > /dev/null 2>&1 then grep -h '#define[ \t]*'$m $src | sed 's/[ \t]*\/\*.*$//g' >> $target fi done if [ -f $src ] then grep '#include <asm-generic' $src >> $target else echo "#include <asm-generic/mman.h>" >> $target fi touch $real_target for m in $macros do if cat << EOF | gcc -Itools/arch/$arch/include -Itools/arch/$arch/include/uapi -Iinclude/ -Iinclude/uapi -E - | grep $m > /dev/null 2>&1 #include <uapi/asm/mman.h.tmp> #include <uapi/linux/mman.h> $m EOF then echo "Fixing $m for $arch" echo "/* $m is undefined on $arch, fix it for perf */" >> $target if echo $m | grep '^MADV_' > /dev/null 2>&1 then grep -h '#define[ \t]*'$m include/uapi/asm-generic/mman-common.h | sed 's/[ \t]*\/\*.*$//g' >> $target else echo "#define $m 0" >> $target fi fi done real_target=tools/arch/$arch/include/uapi/asm/mman.h echo '#ifndef '$guard > $real_target echo '#define '$guard >> $real_target cat $target | sed 's|asm-generic|uapi/asm-generic|g' >> $real_target echo '#endif' >> $real_target rm $target echo "$real_target" done exit 0 # Following macros are extracted from: # tools/perf/trace/beauty/mmap.c # # start macro list MADV_DODUMP MADV_DOFORK MADV_DONTDUMP MADV_DONTFORK MADV_DONTNEED MADV_FREE MADV_HUGEPAGE MADV_HWPOISON MADV_MERGEABLE MADV_NOHUGEPAGE MADV_NORMAL MADV_RANDOM MADV_REMOVE MADV_SEQUENTIAL MADV_SOFT_OFFLINE MADV_UNMERGEABLE MADV_WILLNEED MAP_32BIT MAP_ANONYMOUS MAP_DENYWRITE MAP_EXECUTABLE MAP_FILE MAP_FIXED MAP_GROWSDOWN MAP_HUGETLB MAP_LOCKED MAP_NONBLOCK MAP_NORESERVE MAP_POPULATE MAP_PRIVATE MAP_SHARED MAP_STACK MAP_UNINITIALIZED MREMAP_FIXED MREMAP_MAYMOVE PROT_EXEC PROT_GROWSDOWN PROT_GROWSUP PROT_NONE PROT_READ PROT_SEM PROT_WRITE Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Kim Phillips <kim.phillips@arm.com> Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Fixes: 277cf08f3feb ("perf trace beauty mmap: Fix defines for non !x86_64") Link: http://lkml.kernel.org/r/1473850649-83389-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-13tools include: Add uapi mman.h for each architectureWang Nan1-0/+39
Some mmap related macros have different values for different architectures. This patch introduces uapi mman.h for each architectures. Three headers are cloned from kernel include to tools/include: tools/include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman.h tools/include/uapi/linux/mman.h The main part of this patch is generated by following script: macros=`cat $0 | awk 'V==1 {print}; /^# start macro list/ {V=1}'` for arch in `ls tools/arch` do [ -d tools/arch/$arch/include/uapi/asm ] || mkdir -p tools/arch/$arch/include/uapi/asm src=arch/$arch/include/uapi/asm/mman.h target=tools/arch/$arch/include/uapi/asm/mman.h guard="TOOLS_ARCH_"`echo $arch | awk '{print toupper($0)}'`_UAPI_ASM_MMAN_FIX_H echo '#ifndef '$guard > $target echo '#define '$guard >> $target [ -f $src ] && for m in $macros do if grep '#define[ \t]*'$m $src > /dev/null 2>&1 then grep -h '#define[ \t]*'$m $src | sed 's/[ \t]*\/\*.*$//g' >> $target fi done if [ -f $src ] then grep '#include <asm-generic' $src >> $target else echo "#include <asm-generic/mman.h>" >> $target fi echo '#endif' >> $target echo "$target" done exit 0 # Following macros are extracted from: # tools/perf/trace/beauty/mmap.c # # start macro list MADV_DODUMP MADV_DOFORK MADV_DONTDUMP MADV_DONTFORK MADV_DONTNEED MADV_HUGEPAGE MADV_HWPOISON MADV_MERGEABLE MADV_NOHUGEPAGE MADV_NORMAL MADV_RANDOM MADV_REMOVE MADV_SEQUENTIAL MADV_SOFT_OFFLINE MADV_UNMERGEABLE MADV_WILLNEED MAP_32BIT MAP_ANONYMOUS MAP_DENYWRITE MAP_EXECUTABLE MAP_FILE MAP_FIXED MAP_GROWSDOWN MAP_HUGETLB MAP_LOCKED MAP_NONBLOCK MAP_NORESERVE MAP_POPULATE MAP_PRIVATE MAP_SHARED MAP_STACK MAP_UNINITIALIZED MREMAP_FIXED MREMAP_MAYMOVE PROT_EXEC PROT_GROWSDOWN PROT_GROWSUP PROT_NONE PROT_READ PROT_SEM PROT_WRITE Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1473684871-209320-2-git-send-email-wangnan0@huawei.com [ Added new files to tools/perf/MANIFEST to fix the detached tarball build, add mman.h for ARC ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12tools: Copy the bitsperlong.h files from the kernelArnaldo Carvalho de Melo1-0/+8
We use it in bitops/__ffs.h and bitops/atomic.h, that we also got from the kernel, but were getting it from either newer systems that carry it in /usr/include, or from the kernel sources, that we decided not to touch from tools/ code. Fix it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-lwqvgbuitjmrdpjmjp6zqnyx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12tools: Copy the header files needed by perf toolsArnaldo Carvalho de Melo1-0/+208
Those kernel files were being directly accessed, which we're not allowing anymore to avoid that changes in the kernel side break tooling. Warn if these copies drift from the original files. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: David Ahern <dsahern@gmail.com> Cc: Eric Auger <eric.auger@linaro.org> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Yunlong Song <yunlong.song@huawei.com> Link: http://lkml.kernel.org/n/tip-mnopguymhnwzjhw3mowllvsy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-08perf tools: Move mips barrier.h stuff to tools/arch/mips/include/asm/barrier.hArnaldo Carvalho de Melo1-0/+20
We will need it for atomic.h, so move it from the ad-hoc tools/perf/ place to a tools/ subset of the kernel arch/ hierarchy. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-c5a8m8lbjuy0agep6giykxbz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>