Age | Commit message (Collapse) | Author | Files | Lines |
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2024-03-11
We've added 59 non-merge commits during the last 9 day(s) which contain
a total of 88 files changed, 4181 insertions(+), 590 deletions(-).
The main changes are:
1) Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages to be used in bpf_arena,
from Alexei.
2) Introduce bpf_arena which is sparse shared memory region between bpf
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly for
both user-space programs and bpf programs, from Alexei and Andrii.
3) Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it, from Alexei.
4) Use IETF format for field definitions in the BPF standard
document, from Dave.
5) Extend struct_ops libbpf APIs to allow specify version suffixes for
stuct_ops map types, share the same BPF program between several map
definitions, and other improvements, from Eduard.
6) Enable struct_ops support for more than one page in trampolines,
from Kui-Feng.
7) Support kCFI + BPF on riscv64, from Puranjay.
8) Use bpf_prog_pack for arm64 bpf trampoline, from Puranjay.
9) Fix roundup_pow_of_two undefined behavior on 32-bit archs, from Toke.
====================
Link: https://lore.kernel.org/r/20240312003646.8692-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LLVM generates rX = addr_space_cast(rY, dst_addr_space, src_addr_space)
instruction when pointers in non-zero address space are used by the bpf
program. Recognize this insn in uapi and in bpf disassembler.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-3-alexei.starovoitov@gmail.com
|
|
Introduce bpf_arena, which is a sparse shared memory region between the bpf
program and user space.
Use cases:
1. User space mmap-s bpf_arena and uses it as a traditional mmap-ed
anonymous region, like memcached or any key/value storage. The bpf
program implements an in-kernel accelerator. XDP prog can search for
a key in bpf_arena and return a value without going to user space.
2. The bpf program builds arbitrary data structures in bpf_arena (hash
tables, rb-trees, sparse arrays), while user space consumes it.
3. bpf_arena is a "heap" of memory from the bpf program's point of view.
The user space may mmap it, but bpf program will not convert pointers
to user base at run-time to improve bpf program speed.
Initially, the kernel vm_area and user vma are not populated. User space
can fault in pages within the range. While servicing a page fault,
bpf_arena logic will insert a new page into the kernel and user vmas. The
bpf program can allocate pages from that region via
bpf_arena_alloc_pages(). This kernel function will insert pages into the
kernel vm_area. The subsequent fault-in from user space will populate that
page into the user vma. The BPF_F_SEGV_ON_FAULT flag at arena creation time
can be used to prevent fault-in from user space. In such a case, if a page
is not allocated by the bpf program and not present in the kernel vm_area,
the user process will segfault. This is useful for use cases 2 and 3 above.
bpf_arena_alloc_pages() is similar to user space mmap(). It allocates pages
either at a specific address within the arena or allocates a range with the
maple tree. bpf_arena_free_pages() is analogous to munmap(), which frees
pages and removes the range from the kernel vm_area and from user process
vmas.
bpf_arena can be used as a bpf program "heap" of up to 4GB. The speed of
bpf program is more important than ease of sharing with user space. This is
use case 3. In such a case, the BPF_F_NO_USER_CONV flag is recommended.
It will tell the verifier to treat the rX = bpf_arena_cast_user(rY)
instruction as a 32-bit move wX = wY, which will improve bpf prog
performance. Otherwise, bpf_arena_cast_user is translated by JIT to
conditionally add the upper 32 bits of user vm_start (if the pointer is not
NULL) to arena pointers before they are stored into memory. This way, user
space sees them as valid 64-bit pointers.
Diff https://github.com/llvm/llvm-project/pull/84410 enables LLVM BPF
backend generate the bpf_addr_space_cast() instruction to cast pointers
between address_space(1) which is reserved for bpf_arena pointers and
default address space zero. All arena pointers in a bpf program written in
C language are tagged as __attribute__((address_space(1))). Hence, clang
provides helpful diagnostics when pointers cross address space. Libbpf and
the kernel support only address_space == 1. All other address space
identifiers are reserved.
rX = bpf_addr_space_cast(rY, /* dst_as */ 1, /* src_as */ 0) tells the
verifier that rX->type = PTR_TO_ARENA. Any further operations on
PTR_TO_ARENA register have to be in the 32-bit domain. The verifier will
mark load/store through PTR_TO_ARENA with PROBE_MEM32. JIT will generate
them as kern_vm_start + 32bit_addr memory accesses. The behavior is similar
to copy_from_kernel_nofault() except that no address checks are necessary.
The address is guaranteed to be in the 4GB range. If the page is not
present, the destination register is zeroed on read, and the operation is
ignored on write.
rX = bpf_addr_space_cast(rY, 0, 1) tells the verifier that rX->type =
unknown scalar. If arena->map_flags has BPF_F_NO_USER_CONV set, then the
verifier converts such cast instructions to mov32. Otherwise, JIT will emit
native code equivalent to:
rX = (u32)rY;
if (rY)
rX |= clear_lo32_bits(arena->user_vm_start); /* replace hi32 bits in rX */
After such conversion, the pointer becomes a valid user pointer within
bpf_arena range. The user process can access data structures created in
bpf_arena without any additional computations. For example, a linked list
built by a bpf program can be walked natively by user space.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-2-alexei.starovoitov@gmail.com
|
|
Rx alloc failures are commonly counted by drivers.
Support reporting those via netdev-genl queue stats.
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ethtool-nl family does a good job exposing various protocol
related and IEEE/IETF statistics which used to get dumped under
ethtool -S, with creative names. Queue stats don't have a netlink
API, yet, and remain a lion's share of ethtool -S output for new
drivers. Not only is that bad because the names differ driver to
driver but it's also bug-prone. Intuitively drivers try to report
only the stats for active queues, but querying ethtool stats
involves multiple system calls, and the number of stats is
read separately from the stats themselves. Worse still when user
space asks for values of the stats, it doesn't inform the kernel
how big the buffer is. If number of stats increases in the meantime
kernel will overflow user buffer.
Add a netlink API for dumping queue stats. Queue information is
exposed via the netdev-genl family, so add the stats there.
Support per-queue and sum-for-device dumps. Latter will be useful
when subsequent patches add more interesting common stats than
just bytes and packets.
The API does not currently distinguish between HW and SW stats.
The expectation is that the source of the stats will either not
matter much (good packets) or be obvious (skb alloc errors).
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce may_goto instruction that from the verifier pov is similar to
open coded iterators bpf_for()/bpf_repeat() and bpf_loop() helper, but it
doesn't iterate any objects.
In assembly 'may_goto' is a nop most of the time until bpf runtime has to
terminate the program for whatever reason. In the current implementation
may_goto has a hidden counter, but other mechanisms can be used.
For programs written in C the later patch introduces 'cond_break' macro
that combines 'may_goto' with 'break' statement and has similar semantics:
cond_break is a nop until bpf runtime has to break out of this loop.
It can be used in any normal "for" or "while" loop, like
for (i = zero; i < cnt; cond_break, i++) {
The verifier recognizes that may_goto is used in the program, reserves
additional 8 bytes of stack, initializes them in subprog prologue, and
replaces may_goto instruction with:
aux_reg = *(u64 *)(fp - 40)
if aux_reg == 0 goto pc+off
aux_reg -= 1
*(u64 *)(fp - 40) = aux_reg
may_goto instruction can be used by LLVM to implement __builtin_memcpy,
__builtin_strcmp.
may_goto is not a full substitute for bpf_for() macro.
bpf_for() doesn't have induction variable that verifiers sees,
so 'i' in bpf_for(i, 0, 100) is seen as imprecise and bounded.
But when the code is written as:
for (i = 0; i < 100; cond_break, i++)
the verifier see 'i' as precise constant zero,
hence cond_break (aka may_goto) doesn't help to converge the loop.
A static or global variable can be used as a workaround:
static int zero = 0;
for (i = zero; i < 100; cond_break, i++) // works!
may_goto works well with arena pointers that don't need to be bounds
checked on access. Load/store from arena returns imprecise unbounded
scalar and loops with may_goto pass the verifier.
Reserve new opcode BPF_JMP | BPF_JCOND for may_goto insn.
JCOND stands for conditional pseudo jump.
Since goto_or_nop insn was proposed, it may use the same opcode.
may_goto vs goto_or_nop can be distinguished by src_reg:
code = BPF_JMP | BPF_JCOND
src_reg = 0 - may_goto
src_reg = 1 - goto_or_nop
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240306031929.42666-2-alexei.starovoitov@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace deprecated 0-length array in struct bpf_lpm_trie_key with
flexible array. Found with GCC 13:
../kernel/bpf/lpm_trie.c:207:51: warning: array subscript i is outside array bounds of 'const __u8[0]' {aka 'const unsigned char[]'} [-Warray-bounds=]
207 | *(__be16 *)&key->data[i]);
| ^~~~~~~~~~~~~
../include/uapi/linux/swab.h:102:54: note: in definition of macro '__swab16'
102 | #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
| ^
../include/linux/byteorder/generic.h:97:21: note: in expansion of macro '__be16_to_cpu'
97 | #define be16_to_cpu __be16_to_cpu
| ^~~~~~~~~~~~~
../kernel/bpf/lpm_trie.c:206:28: note: in expansion of macro 'be16_to_cpu'
206 | u16 diff = be16_to_cpu(*(__be16 *)&node->data[i]
^
| ^~~~~~~~~~~
In file included from ../include/linux/bpf.h:7:
../include/uapi/linux/bpf.h:82:17: note: while referencing 'data'
82 | __u8 data[0]; /* Arbitrary size */
| ^~~~
And found at run-time under CONFIG_FORTIFY_SOURCE:
UBSAN: array-index-out-of-bounds in kernel/bpf/lpm_trie.c:218:49
index 0 is out of range for type '__u8 [*]'
Changing struct bpf_lpm_trie_key is difficult since has been used by
userspace. For example, in Cilium:
struct egress_gw_policy_key {
struct bpf_lpm_trie_key lpm_key;
__u32 saddr;
__u32 daddr;
};
While direct references to the "data" member haven't been found, there
are static initializers what include the final member. For example,
the "{}" here:
struct egress_gw_policy_key in_key = {
.lpm_key = { 32 + 24, {} },
.saddr = CLIENT_IP,
.daddr = EXTERNAL_SVC_IP & 0Xffffff,
};
To avoid the build time and run time warnings seen with a 0-sized
trailing array for struct bpf_lpm_trie_key, introduce a new struct
that correctly uses a flexible array for the trailing bytes,
struct bpf_lpm_trie_key_u8. As part of this, include the "header"
portion (which is just the "prefixlen" member), so it can be used
by anything building a bpf_lpr_trie_key that has trailing members that
aren't a u8 flexible array (like the self-test[1]), which is named
struct bpf_lpm_trie_key_hdr.
Unfortunately, C++ refuses to parse the __struct_group() helper, so
it is not possible to define struct bpf_lpm_trie_key_hdr directly in
struct bpf_lpm_trie_key_u8, so we must open-code the union directly.
Adjust the kernel code to use struct bpf_lpm_trie_key_u8 through-out,
and for the selftest to use struct bpf_lpm_trie_key_hdr. Add a comment
to the UAPI header directing folks to the two new options.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Closes: https://paste.debian.net/hidden/ca500597/
Link: https://lore.kernel.org/all/202206281009.4332AA33@keescook/ [1]
Link: https://lore.kernel.org/bpf/20240222155612.it.533-kees@kernel.org
|
|
The batch lookup and lookup_and_delete APIs have two parameters,
in_batch and out_batch, to facilitate iterative
lookup/lookup_and_deletion operations for supported maps. Except NULL
for in_batch at the start of these two batch operations, both parameters
need to point to memory equal or larger than the respective map key
size, except for various hashmaps (hash, percpu_hash, lru_hash,
lru_percpu_hash) where the in_batch/out_batch memory size should be
at least 4 bytes.
Document these semantics to clarify the API.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240221211838.1241578-1-martin.kelly@crowdstrike.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/common.h
38cc3c6dcc09 ("net: stmmac: protect updates of 64-bit statistics counters")
fd5a6a71313e ("net: stmmac: est: Per Tx-queue error count for HLBF")
c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio")
drivers/net/wireless/microchip/wilc1000/netdev.c
c9013880284d ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000")
328efda22af8 ("wifi: wilc1000: do not realloc workqueue everytime an interface is added")
net/unix/garbage.c
11498715f266 ("af_unix: Remove io_uring code for GC.")
1279f9d9dec2 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the independent control state machine per IEEE
802.1AX-2008 5.4.15 in addition to the existing implementation of the
coupled control state machine.
Introduces two new states, AD_MUX_COLLECTING and AD_MUX_DISTRIBUTING in
the LACP MUX state machine for separated handling of an initial
Collecting state before the Collecting and Distributing state. This
enables a port to be in a state where it can receive incoming packets
while not still distributing. This is useful for reducing packet loss when
a port begins distributing before its partner is able to collect.
Added new functions such as bond_set_slave_tx_disabled_flags and
bond_set_slave_rx_enabled_flags to precisely manage the port's collecting
and distributing states. Previously, there was no dedicated method to
disable TX while keeping RX enabled, which this patch addresses.
Note that the regular flow process in the kernel's bonding driver remains
unaffected by this patch. The extension requires explicit opt-in by the
user (in order to ensure no disruptions for existing setups) via netlink
support using the new bonding parameter coupled_control. The default value
for coupled_control is set to 1 so as to preserve existing behaviour.
Signed-off-by: Aahil Awatramani <aahila@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240202175858.1573852-1-aahila@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
To pick the changes from:
35e27a5744131996 ("fs: keep struct mnt_id_req extensible")
b4c2bea8ceaa50cd ("add listmount(2) syscall")
46eae99ef73302f9 ("add statmount(2) syscall")
That doesn't change anything in tools this time as nothing that is
harvested by the beauty scripts got changed:
$ ls -1 tools/perf/trace/beauty/*mount*sh
tools/perf/trace/beauty/fsmount.sh
tools/perf/trace/beauty/mount_flags.sh
tools/perf/trace/beauty/move_mount_flags.sh
$
This addresses this perf build warning.
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbkMiB7ZcOsLP2V5@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
lsm_{[gs]et_self_attr,list_modules} syscall numbers
To pick the changes in these csets:
d8b0f5465012538c ("wire up syscalls for statmount/listmount")
5f42375904b08890 ("LSM: wireup Linux Security Module syscalls")
Used in some architectures to create syscall tables.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbfMuAlUMRO9Hqa6@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
a5d3df8ae13fada7 ("KVM: remove deprecated UAPIs")
6d72283526090850 ("KVM x86/xen: add an override for PVCLOCK_TSC_STABLE_BIT")
89ea60c2c7b5838b ("KVM: x86: Add support for "protected VMs" that can utilize private memory")
8dd2eee9d526c30f ("KVM: x86/mmu: Handle page fault for private memory")
a7800aa80ea4d535 ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
5a475554db1e476a ("KVM: Introduce per-page memory attributes")
16f95f3b95caded2 ("KVM: Add KVM_EXIT_MEMORY_FAULT exit to report faults to userspace")
bb58b90b1a8f753b ("KVM: Introduce KVM_SET_USER_MEMORY_REGION2")
3f9cd0ca848413fd ("KVM: arm64: Allow userspace to get the writable masks for feature ID registers")
That automatically adds support for some new ioctls and remove a bunch
of deprecated ones.
This ends up making the new binary to forget about the deprecated one,
so when used in an older system it will not be able to resolve those
codes to strings.
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
--- before 2024-01-27 14:48:16.523014020 -0300
+++ after 2024-01-27 14:48:24.183932866 -0300
@@ -14,6 +14,7 @@
[0x46] = "SET_USER_MEMORY_REGION",
[0x47] = "SET_TSS_ADDR",
[0x48] = "SET_IDENTITY_MAP_ADDR",
+ [0x49] = "SET_USER_MEMORY_REGION2",
[0x60] = "CREATE_IRQCHIP",
[0x61] = "IRQ_LINE",
[0x62] = "GET_IRQCHIP",
@@ -22,14 +23,8 @@
[0x65] = "GET_PIT",
[0x66] = "SET_PIT",
[0x67] = "IRQ_LINE_STATUS",
- [0x69] = "ASSIGN_PCI_DEVICE",
[0x6a] = "SET_GSI_ROUTING",
- [0x70] = "ASSIGN_DEV_IRQ",
[0x71] = "REINJECT_CONTROL",
- [0x72] = "DEASSIGN_PCI_DEVICE",
- [0x73] = "ASSIGN_SET_MSIX_NR",
- [0x74] = "ASSIGN_SET_MSIX_ENTRY",
- [0x75] = "DEASSIGN_DEV_IRQ",
[0x76] = "IRQFD",
[0x77] = "CREATE_PIT2",
[0x78] = "SET_BOOT_CPU_ID",
@@ -66,7 +61,6 @@
[0x9f] = "GET_VCPU_EVENTS",
[0xa0] = "SET_VCPU_EVENTS",
[0xa3] = "ENABLE_CAP",
- [0xa4] = "ASSIGN_SET_INTX_MASK",
[0xa5] = "SIGNAL_MSI",
[0xa6] = "GET_XCRS",
[0xa7] = "SET_XCRS",
@@ -97,6 +91,8 @@
[0xcd] = "SET_SREGS2",
[0xce] = "GET_STATS_FD",
[0xd0] = "XEN_HVM_EVTCHN_SEND",
+ [0xd2] = "SET_MEMORY_ATTRIBUTES",
+ [0xd4] = "CREATE_GUEST_MEMFD",
[0xe0] = "CREATE_DEVICE",
[0xe1] = "SET_DEVICE_ATTR",
[0xe2] = "GET_DEVICE_ATTR",
$
This silences these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chao Peng <chao.p.peng@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jing Zhang <jingzhangos@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Durrant <pdurrant@amazon.com>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/lkml/ZbVLbkngp4oq13qN@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-01-26
We've added 107 non-merge commits during the last 4 day(s) which contain
a total of 101 files changed, 6009 insertions(+), 1260 deletions(-).
The main changes are:
1) Add BPF token support to delegate a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application. With addressed changes from Christian
and Linus' reviews, from Andrii Nakryiko.
2) Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type,
from Kui-Feng Lee.
3) Add support for retrieval of cookies for perf/kprobe multi links,
from Jiri Olsa.
4) Bigger batch of prep-work for the BPF verifier to eventually support
preserving boundaries and tracking scalars on narrowing fills,
from Maxim Mikityanskiy.
5) Extend the tc BPF flavor to support arbitrary TCP SYN cookies to help
with the scenario of SYN floods, from Kuniyuki Iwashima.
6) Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects,
from Hou Tao.
7) Extend BPF verifier to track aligned ST stores as imprecise spilled
registers, from Yonghong Song.
8) Several fixes to BPF selftests around inline asm constraints and
unsupported VLA code generation, from Jose E. Marchesi.
9) Various updates to the BPF IETF instruction set draft document such
as the introduction of conformance groups for instructions,
from Dave Thaler.
10) Fix BPF verifier to make infinite loop detection in is_state_visited()
exact to catch some too lax spill/fill corner cases,
from Eduard Zingerman.
11) Refactor the BPF verifier pointer ALU check to allow ALU explicitly
instead of implicitly for various register types, from Hao Sun.
12) Fix the flaky tc_redirect_dtime BPF selftest due to slowness
in neighbor advertisement at setup time, from Martin KaFai Lau.
13) Change BPF selftests to skip callback tests for the case when the
JIT is disabled, from Tiezhu Yang.
14) Add a small extension to libbpf which allows to auto create
a map-in-map's inner map, from Andrey Grafin.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (107 commits)
selftests/bpf: Add missing line break in test_verifier
bpf, docs: Clarify definitions of various instructions
bpf: Fix error checks against bpf_get_btf_vmlinux().
bpf: One more maintainer for libbpf and BPF selftests
selftests/bpf: Incorporate LSM policy to token-based tests
selftests/bpf: Add tests for LIBBPF_BPF_TOKEN_PATH envvar
libbpf: Support BPF token path setting through LIBBPF_BPF_TOKEN_PATH envvar
selftests/bpf: Add tests for BPF object load with implicit token
selftests/bpf: Add BPF object loading tests with explicit token passing
libbpf: Wire up BPF token support at BPF object level
libbpf: Wire up token_fd into feature probing logic
libbpf: Move feature detection code into its own file
libbpf: Further decouple feature checking logic from bpf_object
libbpf: Split feature detectors definitions from cached results
selftests/bpf: Utilize string values for delegate_xxx mount options
bpf: Support symbolic BPF FS delegation mount options
bpf: Fail BPF_TOKEN_CREATE if no delegation option was set on BPF FS
bpf,selinux: Allocate bpf_security_struct per BPF token
selftests/bpf: Add BPF token-enabled tests
libbpf: Add BPF token support to bpf_prog_load() API
...
====================
Link: https://lore.kernel.org/r/20240126215710.19855-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DRM_IOCTL_MODE_CLOSEFB
Picking the changes from:
8570c27932e132d2 ("drm/syncobj: Add deadline support for syncobj waits")
9724ed6c1b1212d1 ("drm: Introduce DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT")
e4d983acffff270c ("drm: introduce DRM_CAP_ATOMIC_ASYNC_PAGE_FLIP")
d208d875667e2a29 ("drm: introduce CLOSEFB IOCTL")
afa5cf3175a22b71 ("drm/i915/uapi: fix typos/spellos and punctuation")
Addressing these perf build warnings:
Warning: Kernel ABI header differences:
Now 'perf trace' and other code that might use the
tools/perf/trace/beauty autogenerated tables will be able to translate
this new ioctl command into a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2024-01-26 10:54:23.486381862 -0300
+++ after 2024-01-26 10:54:35.767902442 -0300
@@ -109,6 +109,7 @@
[0xCD] = "SYNCOBJ_TIMELINE_SIGNAL",
[0xCE] = "MODE_GETFB2",
[0xCF] = "SYNCOBJ_EVENTFD",
+ [0xD0] = "MODE_CLOSEFB",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Simon Ser <contact@emersion.fr>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/lkml/ZbPIN9Dcc5AM0uxo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
8a924db2d7b5eb69 ("fs: Pass AT_GETATTR_NOSEC flag to getattr interface function")
That don't add anything that is handled by existing hard coded tables or
table generation scripts.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Link: https://lore.kernel.org/lkml/ZbJv9fGF_k2xXEdr@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
STATX_MNT_ID_UNIQUE
To pick the changes from:
98d2b43081972abe ("add unique mount ID")
That add STATX_MNT_ID_UNIQUE that was manually added to
tools/perf/trace/beauty/statx.c, at some point this should move to the
shell based automated way.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbJq08s19890WDo-@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add basic support of BPF token to BPF_PROG_LOAD. BPF_F_TOKEN_FD flag
should be set in prog_flags field when providing prog_token_fd.
Wire through a set of allowed BPF program types and attach types,
derived from BPF FS at BPF token creation time. Then make sure we
perform bpf_token_capable() checks everywhere where it's relevant.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-7-andrii@kernel.org
|
|
Accept BPF token FD in BPF_BTF_LOAD command to allow BTF data loading
through delegated BPF token. BPF_F_TOKEN_FD flag has to be specified
when passing BPF token FD. Given BPF_BTF_LOAD command didn't have flags
field before, we also add btf_flags field.
BTF loading is a pretty straightforward operation, so as long as BPF
token is created with allow_cmds granting BPF_BTF_LOAD command, kernel
proceeds to parsing BTF data and creating BTF object.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-6-andrii@kernel.org
|
|
Allow providing token_fd for BPF_MAP_CREATE command to allow controlled
BPF map creation from unprivileged process through delegated BPF token.
New BPF_F_TOKEN_FD flag is added to specify together with BPF token FD
for BPF_MAP_CREATE command.
Wire through a set of allowed BPF map types to BPF token, derived from
BPF FS at BPF token creation time. This, in combination with allowed_cmds
allows to create a narrowly-focused BPF token (controlled by privileged
agent) with a restrictive set of BPF maps that application can attempt
to create.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-5-andrii@kernel.org
|
|
Add new kind of BPF kernel object, BPF token. BPF token is meant to
allow delegating privileged BPF functionality, like loading a BPF
program or creating a BPF map, from privileged process to a *trusted*
unprivileged process, all while having a good amount of control over which
privileged operations could be performed using provided BPF token.
This is achieved through mounting BPF FS instance with extra delegation
mount options, which determine what operations are delegatable, and also
constraining it to the owning user namespace (as mentioned in the
previous patch).
BPF token itself is just a derivative from BPF FS and can be created
through a new bpf() syscall command, BPF_TOKEN_CREATE, which accepts BPF
FS FD, which can be attained through open() API by opening BPF FS mount
point. Currently, BPF token "inherits" delegated command, map types,
prog type, and attach type bit sets from BPF FS as is. In the future,
having an BPF token as a separate object with its own FD, we can allow
to further restrict BPF token's allowable set of things either at the
creation time or after the fact, allowing the process to guard itself
further from unintentionally trying to load undesired kind of BPF
programs. But for now we keep things simple and just copy bit sets as is.
When BPF token is created from BPF FS mount, we take reference to the
BPF super block's owning user namespace, and then use that namespace for
checking all the {CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN, CAP_SYS_ADMIN}
capabilities that are normally only checked against init userns (using
capable()), but now we check them using ns_capable() instead (if BPF
token is provided). See bpf_token_capable() for details.
Such setup means that BPF token in itself is not sufficient to grant BPF
functionality. User namespaced process has to *also* have necessary
combination of capabilities inside that user namespace. So while
previously CAP_BPF was useless when granted within user namespace, now
it gains a meaning and allows container managers and sys admins to have
a flexible control over which processes can and need to use BPF
functionality within the user namespace (i.e., container in practice).
And BPF FS delegation mount options and derived BPF tokens serve as
a per-container "flag" to grant overall ability to use bpf() (plus further
restrict on which parts of bpf() syscalls are treated as namespaced).
Note also, BPF_TOKEN_CREATE command itself requires ns_capable(CAP_BPF)
within the BPF FS owning user namespace, rounding up the ns_capable()
story of BPF token. Also creating BPF token in init user namespace is
currently not supported, given BPF token doesn't have any effect in init
user namespace anyways.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-4-andrii@kernel.org
|
|
Pass the fd of a btf from the userspace to the bpf() syscall, and then
convert the fd into a btf. The btf is generated from the module that
defines the target BPF struct_ops type.
In order to inform the kernel about the module that defines the target
struct_ops type, the userspace program needs to provide a btf fd for the
respective module's btf. This btf contains essential information on the
types defined within the module, including the target struct_ops type.
A btf fd must be provided to the kernel for struct_ops maps and for the bpf
programs attached to those maps.
In the case of the bpf programs, the attach_btf_obj_fd parameter is passed
as part of the bpf_attr and is converted into a btf. This btf is then
stored in the prog->aux->attach_btf field. Here, it just let the verifier
access attach_btf directly.
In the case of struct_ops maps, a btf fd is passed as value_type_btf_obj_fd
of bpf_attr. The bpf_struct_ops_map_alloc() function converts the fd to a
btf and stores it as st_map->btf. A flag BPF_F_VTYPE_BTF_OBJ_FD is added
for map_flags to indicate that the value of value_type_btf_obj_fd is set.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-9-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Include btf object id (btf_obj_id) in bpf_map_info so that tools (ex:
bpftools struct_ops dump) know the correct btf from the kernel to look up
type information of struct_ops types.
Since struct_ops types can be defined and registered in a module. The
type information of a struct_ops type are defined in the btf of the
module defining it. The userspace tools need to know which btf is for
the module defining a struct_ops type.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-7-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Storing cookies in kprobe_multi bpf_link_info data. The cookies
field is optional and if provided it needs to be an array of
__u64 with kprobe_multi.count length.
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
At the moment we don't store cookie for perf_event probes,
while we do that for the rest of the probes.
Adding cookie fields to struct bpf_link_info perf event
probe records:
perf_event.uprobe
perf_event.kprobe
perf_event.tracepoint
perf_event.perf_event
And the code to store that in bpf_link_info struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20240119110505.400573-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Both commit 91051f003948 ("tcp: Dump bound-only sockets in inet_diag.")
and commit 985b8ea9ec7e ("bpf, docs: Fix bpf_redirect_peer header doc")
missed the tooling header sync. Fix it.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"Add Namhyung Kim as tools/perf/ co-maintainer, we're taking turns
processing patches, switching roles from perf-tools to perf-tools-next
at each Linux release.
Data profiling:
- Associate samples that identify loads and stores with data
structures. This uses events available on Intel, AMD and others and
DWARF info:
# To get memory access samples in kernel for 1 second (on Intel)
$ perf mem record -a -K --ldlat=4 -- sleep 1
# Similar for the AMD (but it requires 6.3+ kernel for BPF filters)
$ perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000' -- sleep 1
Then, amongst several modes of post processing, one can do things like:
$ perf report -s type,typeoff --hierarchy --group --stdio
...
#
# Samples: 10K of events 'cpu/mem-loads,ldlat=4/P, cpu/mem-stores/P, dummy:u'
# Event count (approx.): 602758064
#
# Overhead Data Type / Data Type Offset
# ........................... ............................
#
26.09% 3.28% 0.00% long unsigned int
26.09% 3.28% 0.00% long unsigned int +0 (no field)
18.48% 0.73% 0.00% struct page
10.83% 0.02% 0.00% struct page +8 (lru.next)
3.90% 0.28% 0.00% struct page +0 (flags)
3.45% 0.06% 0.00% struct page +24 (mapping)
0.25% 0.28% 0.00% struct page +48 (_mapcount.counter)
0.02% 0.06% 0.00% struct page +32 (index)
0.02% 0.00% 0.00% struct page +52 (_refcount.counter)
0.02% 0.01% 0.00% struct page +56 (memcg_data)
0.00% 0.01% 0.00% struct page +16 (lru.prev)
15.37% 17.54% 0.00% (stack operation)
15.37% 17.54% 0.00% (stack operation) +0 (no field)
11.71% 50.27% 0.00% (unknown)
11.71% 50.27% 0.00% (unknown) +0 (no field)
$ perf annotate --data-type
...
Annotate type: 'struct cfs_rq' in [kernel.kallsyms] (13 samples):
============================================================================
samples offset size field
13 0 640 struct cfs_rq {
2 0 16 struct load_weight load {
2 0 8 unsigned long weight;
0 8 4 u32 inv_weight;
};
0 16 8 unsigned long runnable_weight;
0 24 4 unsigned int nr_running;
1 28 4 unsigned int h_nr_running;
...
$ perf annotate --data-type=page --group
Annotate type: 'struct page' in [kernel.kallsyms] (480 samples):
event[0] = cpu/mem-loads,ldlat=4/P
event[1] = cpu/mem-stores/P
event[2] = dummy:u
===================================================================================
samples offset size field
447 33 0 0 64 struct page {
108 8 0 0 8 long unsigned int flags;
319 13 0 8 40 union {
319 13 0 8 40 struct {
236 2 0 8 16 union {
236 2 0 8 16 struct list_head lru {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
236 2 0 8 16 struct {
236 1 0 8 8 void* __filler;
0 1 0 16 4 unsigned int mlock_count;
};
236 2 0 8 16 struct list_head buddy_list {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
236 2 0 8 16 struct list_head pcp_list {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
};
82 4 0 24 8 struct address_space* mapping;
1 7 0 32 8 union {
1 7 0 32 8 long unsigned int index;
1 7 0 32 8 long unsigned int share;
};
0 0 0 40 8 long unsigned int private;
};
This uses the existing annotate code, calling objdump to do the
disassembly, with improvements to avoid having this take too long,
but longer term a switch to a disassembler library, possibly
reusing code in the kernel will be pursued.
This is the initial implementation, please use it and report
impressions and bugs. Make sure the kernel-debuginfo packages match
the running kernel. The 'perf report' phase for non short perf.data
files may take a while.
There is a great article about it on LWN:
https://lwn.net/Articles/955709/ - "Data-type profiling for perf"
One last test I did while writing this text, on a AMD Ryzen 5950X,
using a distro kernel, while doing a simple 'find /' on an
otherwise idle system resulted in:
# uname -r
6.6.9-100.fc38.x86_64
# perf -vv | grep BPF_
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
bpf_skeletons: [ on ] # HAVE_BPF_SKEL
# rpm -qa | grep kernel-debuginfo
kernel-debuginfo-common-x86_64-6.6.9-100.fc38.x86_64
kernel-debuginfo-6.6.9-100.fc38.x86_64
#
# perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000'
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.199 MB perf.data (2913 samples) ]
#
# ls -la perf.data
-rw-------. 1 root root 2346486 Jan 9 18:36 perf.data
# perf evlist
ibs_op//
dummy:u
# perf evlist -v
ibs_op//: type: 11, size: 136, config: 0, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1
dummy:u: type: 1 (PERF_TYPE_SOFTWARE), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ADDR|CPU|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, mmap_data: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
#
# perf report -s type,typeoff --hierarchy --group --stdio
# Total Lost Samples: 0
#
# Samples: 2K of events 'ibs_op//, dummy:u'
# Event count (approx.): 1904553038
#
# Overhead Data Type / Data Type Offset
# ................... ............................
#
73.70% 0.00% (unknown)
73.70% 0.00% (unknown) +0 (no field)
3.01% 0.00% long unsigned int
3.00% 0.00% long unsigned int +0 (no field)
0.01% 0.00% long unsigned int +2 (no field)
2.73% 0.00% struct task_struct
1.71% 0.00% struct task_struct +52 (on_cpu)
0.38% 0.00% struct task_struct +2104 (rcu_read_unlock_special.b.blocked)
0.23% 0.00% struct task_struct +2100 (rcu_read_lock_nesting)
0.14% 0.00% struct task_struct +2384 ()
0.06% 0.00% struct task_struct +3096 (signal)
0.05% 0.00% struct task_struct +3616 (cgroups)
0.05% 0.00% struct task_struct +2344 (active_mm)
0.02% 0.00% struct task_struct +46 (flags)
0.02% 0.00% struct task_struct +2096 (migration_disabled)
0.01% 0.00% struct task_struct +24 (__state)
0.01% 0.00% struct task_struct +3956 (mm_cid_active)
0.01% 0.00% struct task_struct +1048 (cpus_ptr)
0.01% 0.00% struct task_struct +184 (se.group_node.next)
0.01% 0.00% struct task_struct +20 (thread_info.cpu)
0.00% 0.00% struct task_struct +104 (on_rq)
0.00% 0.00% struct task_struct +2456 (pid)
1.36% 0.00% struct module
0.59% 0.00% struct module +952 (kallsyms)
0.42% 0.00% struct module +0 (state)
0.23% 0.00% struct module +8 (list.next)
0.12% 0.00% struct module +216 (syms)
0.95% 0.00% struct inode
0.41% 0.00% struct inode +40 (i_sb)
0.22% 0.00% struct inode +0 (i_mode)
0.06% 0.00% struct inode +76 (i_rdev)
0.06% 0.00% struct inode +56 (i_security)
<SNIP>
perf top/report:
- Don't ignore job control, allowing control+Z + bg to work.
- Add s390 raw data interpretation for PAI (Processor Activity
Instrumentation) counters.
perf archive:
- Add new option '--all' to pack perf.data with DSOs.
- Add new option '--unpack' to expand tarballs.
Initialization speedups:
- Lazily initialize zstd streams to save memory when not using it.
- Lazily allocate/size mmap event copy.
- Lazy load kernel symbols in 'perf record'.
- Be lazier in allocating lost samples buffer in 'perf record'.
- Don't synthesize BPF events when disabled via the command line
(perf record --no-bpf-event).
Assorted improvements:
- Show note on AMD systems that the :p, :pp, :ppp and :P are all the
same, as IBS (Instruction Based Sampling) is used and it is
inherentely precise, not having levels of precision like in Intel
systems.
- When 'cycles' isn't available, fall back to the "task-clock" event
when not system wide, not to 'cpu-clock'.
- Add --debug-file option to redirect debug output, e.g.:
$ perf --debug-file /tmp/perf.log record -v true
- Shrink 'struct map' to under one cacheline by avoiding function
pointers for selecting if addresses are identity or DSO relative,
and using just a byte for some boolean struct members.
- Resolve the arch specific strerrno just once to use in
perf_env__arch_strerrno().
- Reduce memory for recording PERF_RECORD_LOST_SAMPLES event.
Assorted fixes:
- Fix the default 'perf top' usage on Intel hybrid systems, now it
starts with a browser showing the number of samples for Efficiency
(cpu_atom/cycles/P) and Performance (cpu_core/cycles/P). This
behaviour is similar on ARM64, with its respective set of
big.LITTLE processors.
- Fix segfault on build_mem_topology() error path.
- Fix 'perf mem' error on hybrid related to availability of mem event
in a PMU.
- Fix missing reference count gets (map, maps) in the db-export code.
- Avoid recursively taking env->bpf_progs.lock in the 'perf_env'
code.
- Use the newly introduced maps__for_each_map() to add missing
locking around iteration of 'struct map' entries.
- Parse NOTE segments until the build id is found, don't stop on the
first one, ELF files may have several such NOTE segments.
- Remove 'egrep' usage, its deprecated, use 'grep -E' instead.
- Warn first about missing libelf, not libbpf, that depends on
libelf.
- Use alternative to 'find ... -printf' as this isn't supported in
busybox.
- Address python 3.6 DeprecationWarning for string scapes.
- Fix memory leak in uniq() in libsubcmd.
- Fix man page formatting for 'perf lock'
- Fix some spelling mistakes.
perf tests:
- Fail shell tests that needs some symbol in perf itself if it is
stripped. These tests check if a symbol is resolved, if some hot
function is indeed detected by profiling, etc.
- The 'perf test sigtrap' test is currently failing on PREEMPT_RT,
skip it if sleeping spinlocks are detected (using BTF) and point to
the mailing list discussion about it. This test is also being
skipped on several architectures (powerpc, s390x, arm and aarch64)
due to other pending issues with intruction breakpoints.
- Adjust test case perf record offcpu profiling tests for s390.
- Fix 'Setup struct perf_event_attr' fails on s390 on z/VM guest,
addressing issues caused by the fallback from cycles to task-clock
done in this release.
- Fix mask for VG register in the user-regs test.
- Use shellcheck on 'perf test' shell scripts automatically to make
sure changes don't introduce things it flags as problematic.
- Add option to change objdump binary and allow it to be set via
'perf config'.
- Add basic 'perf script', 'perf list --json" and 'perf diff' tests.
- Basic branch counter support.
- Make DSO tests a suite rather than individual.
- Remove atomics from test_loop to avoid test failures.
- Fix call chain match on powerpc for the record+probe_libc_inet_pton
test.
- Improve Intel hybrid tests.
Vendor event files (JSON):
powerpc:
- Update datasource event name to fix duplicate events on IBM's
Power10.
- Add PVN for HX-C2000 CPU with Power8 Architecture.
Intel:
- Alderlake/rocketlake metric fixes.
- Update emeraldrapids events to v1.02.
- Update icelakex events to v1.23.
- Update sapphirerapids events to v1.17.
- Add skx, clx, icx and spr upi bandwidth metric.
AMD:
- Add Zen 4 memory controller events.
RISC-V:
- Add StarFive Dubhe-80 and Dubhe-90 JSON files.
https://www.starfivetech.com/en/site/cpu-u
- Add T-HEAD C9xx JSON file.
https://github.com/riscv-software-src/opensbi/blob/master/docs/platform/thead-c9xx.md
ARM64:
- Remove UTF-8 characters from cmn.json, that were causing build
failure in some distros.
- Add core PMU events and metrics for Ampere One X.
- Rename Ampere One's BPU_FLUSH_MEM_FAULT to GPC_FLUSH_MEM_FAULT
libperf:
- Rename several perf_cpu_map constructor names to clarify what they
really do.
- Ditto for some other methods, coping with some issues in their
semantics, like perf_cpu_map__empty() ->
perf_cpu_map__has_any_cpu_or_is_empty().
- Document perf_cpu_map__nr()'s behavior
perf stat:
- Exit if parse groups fails.
- Combine the -A/--no-aggr and --no-merge options.
- Fix help message for --metric-no-threshold option.
Hardware tracing:
ARM64 CoreSight:
- Bump minimum OpenCSD version to ensure a bugfix is present.
- Add 'T' itrace option for timestamp trace
- Set start vm addr of exectable file to 0 and don't ignore first
sample on the arm-cs-trace-disasm.py 'perf script'"
* tag 'perf-tools-for-v6.8-1-2024-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (179 commits)
MAINTAINERS: Add Namhyung as tools/perf/ co-maintainer
perf test: test case 'Setup struct perf_event_attr' fails on s390 on z/vm
perf db-export: Fix missing reference count get in call_path_from_sample()
perf tests: Add perf script test
libsubcmd: Fix memory leak in uniq()
perf TUI: Don't ignore job control
perf vendor events intel: Update sapphirerapids events to v1.17
perf vendor events intel: Update icelakex events to v1.23
perf vendor events intel: Update emeraldrapids events to v1.02
perf vendor events intel: Alderlake/rocketlake metric fixes
perf x86 test: Add hybrid test for conflicting legacy/sysfs event
perf x86 test: Update hybrid expectations
perf vendor events amd: Add Zen 4 memory controller events
perf stat: Fix hard coded LL miss units
perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event
perf env: Avoid recursively taking env->bpf_progs.lock
perf annotate: Add --insn-stat option for debugging
perf annotate: Add --type-stat option for debugging
perf annotate: Support event group display
perf annotate: Add --data-type option
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a calm development cycle. There were an ALSA core extension for
subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4. Also supports for ACPI
parse for the ES83xx driver that reduces quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes"
* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
ALSA: hda/tas2781: annotate calibration data endianness
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
ALSA: ac97: fix build regression
ALSA: hda: cs35l41: Support more HP models without _DSD
ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
ALSA: hda/tas2781: add TAS2563 support for 14ARB7
ALSA: hda/tas2781: add configurable global i2c address
ALSA: hda/tas2781: add ptrs to calibration functions
ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
ALSA: hda/tas2781: configure the amp after firmware load
ALSA: mark all struct bus_type as const
ASoC: pxa: sspa: Don't select SND_ARM
ASoC: rt5663: cancel the work when system suspends
ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
|
Commit 051d44209842 ("net/sched: Retire CBQ qdisc") retired the CBQ qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit fb38306ceb9e ("net/sched: Retire ATM qdisc") retired the ATM qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit bbe77c14ee61 ("net/sched: Retire dsmark qdisc") retired the dsmark
classifier. Remove UAPI support for it.
Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 8c710f75256b ("net/sched: Retire tcindex classifier") retired the TC
tcindex classifier.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 265b4da82dbf ("net/sched: Retire rsvp classifier") retired the TC RSVP
classifier.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch includes the following revert (one conflicting BPF FS
patch and three token patch sets, represented by merge commits):
- revert 0f5d5454c723 "Merge branch 'bpf-fs-mount-options-parsing-follow-ups'";
- revert 750e785796bb "bpf: Support uid and gid when mounting bpffs";
- revert 733763285acf "Merge branch 'bpf-token-support-in-libbpf-s-bpf-object'";
- revert c35919dcce28 "Merge branch 'bpf-token-and-bpf-fs-based-delegation'".
Link: https://lore.kernel.org/bpf/CAHk-=wg7JuFYwGy=GOMbRCtOL+jwSQsdUaBsRWkDVYbxipbM5A@mail.gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Implement functionality that enables drivers to expose VLAN tag
to XDP code.
VLAN tag is represented by 2 variables:
- protocol ID, which is passed to bpf code in BE
- VLAN TCI, in host byte order
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20231205210847.28460-10-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The PAGEMAP_SCAN ioctl returns information regarding page table entries.
It is more efficient compared to reading pagemap files. CRIU can start to
utilize this ioctl, but it needs info about soft-dirty bits to track
memory changes.
We are aware of a new method for tracking memory changes implemented in
the PAGEMAP_SCAN ioctl. For CRIU, the primary advantage of this method is
its usability by unprivileged users. However, it is not feasible to
transparently replace the soft-dirty tracker with the new one. The main
problem here is userfault descriptors that have to be preserved between
pre-dump iterations. It means criu continues supporting the soft-dirty
method to avoid breakage for current users. The new method will be
implemented as a separate feature.
[avagin@google.com: update tools/include/uapi/linux/fs.h]
Link: https://lkml.kernel.org/r/20231107164139.576046-1-avagin@google.com
Link: https://lkml.kernel.org/r/20231106220959.296568-1-avagin@google.com
Signed-off-by: Andrei Vagin <avagin@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/stmicro/stmmac/dwmac5.c
drivers/net/ethernet/stmicro/stmmac/dwmac5.h
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
drivers/net/ethernet/stmicro/stmmac/hwif.h
37e4b8df27bc ("net: stmmac: fix FPE events losing")
c3f3b97238f6 ("net: stmmac: Refactor EST implementation")
https://lore.kernel.org/all/20231206110306.01e91114@canb.auug.org.au/
Adjacent changes:
net/ipv4/tcp_ao.c
9396c4ee93f9 ("net/tcp: Don't store TCP-AO maclen on reqsk")
7b0f570f879a ("tcp: Move TCP-AO bits from cookie_v[46]_check() to tcp_ao_syncookie().")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To stay consistent with the naming pattern used for similar cases in BPF
UAPI (__MAX_BPF_ATTACH_TYPE, etc), rename MAX_BPF_LINK_TYPE into
__MAX_BPF_LINK_TYPE.
Also similar to MAX_BPF_ATTACH_TYPE and MAX_BPF_REG, add:
#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE
Not all __MAX_xxx enums have such #define, so I'm not sure if we should
add it or not, but I figured I'll start with a completely backwards
compatible way, and we can drop that, if necessary.
Also adjust a selftest that used MAX_BPF_LINK_TYPE enum.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231206190920.1651226-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add basic support of BPF token to BPF_PROG_LOAD. Wire through a set of
allowed BPF program types and attach types, derived from BPF FS at BPF
token creation time. Then make sure we perform bpf_token_capable()
checks everywhere where it's relevant.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Accept BPF token FD in BPF_BTF_LOAD command to allow BTF data loading
through delegated BPF token. BTF loading is a pretty straightforward
operation, so as long as BPF token is created with allow_cmds granting
BPF_BTF_LOAD command, kernel proceeds to parsing BTF data and creating
BTF object.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Allow providing token_fd for BPF_MAP_CREATE command to allow controlled
BPF map creation from unprivileged process through delegated BPF token.
Wire through a set of allowed BPF map types to BPF token, derived from
BPF FS at BPF token creation time. This, in combination with allowed_cmds
allows to create a narrowly-focused BPF token (controlled by privileged
agent) with a restrictive set of BPF maps that application can attempt
to create.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add new kind of BPF kernel object, BPF token. BPF token is meant to
allow delegating privileged BPF functionality, like loading a BPF
program or creating a BPF map, from privileged process to a *trusted*
unprivileged process, all while having a good amount of control over which
privileged operations could be performed using provided BPF token.
This is achieved through mounting BPF FS instance with extra delegation
mount options, which determine what operations are delegatable, and also
constraining it to the owning user namespace (as mentioned in the
previous patch).
BPF token itself is just a derivative from BPF FS and can be created
through a new bpf() syscall command, BPF_TOKEN_CREATE, which accepts BPF
FS FD, which can be attained through open() API by opening BPF FS mount
point. Currently, BPF token "inherits" delegated command, map types,
prog type, and attach type bit sets from BPF FS as is. In the future,
having an BPF token as a separate object with its own FD, we can allow
to further restrict BPF token's allowable set of things either at the
creation time or after the fact, allowing the process to guard itself
further from unintentionally trying to load undesired kind of BPF
programs. But for now we keep things simple and just copy bit sets as is.
When BPF token is created from BPF FS mount, we take reference to the
BPF super block's owning user namespace, and then use that namespace for
checking all the {CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN, CAP_SYS_ADMIN}
capabilities that are normally only checked against init userns (using
capable()), but now we check them using ns_capable() instead (if BPF
token is provided). See bpf_token_capable() for details.
Such setup means that BPF token in itself is not sufficient to grant BPF
functionality. User namespaced process has to *also* have necessary
combination of capabilities inside that user namespace. So while
previously CAP_BPF was useless when granted within user namespace, now
it gains a meaning and allows container managers and sys admins to have
a flexible control over which processes can and need to use BPF
functionality within the user namespace (i.e., container in practice).
And BPF FS delegation mount options and derived BPF tokens serve as
a per-container "flag" to grant overall ability to use bpf() (plus further
restrict on which parts of bpf() syscalls are treated as namespaced).
Note also, BPF_TOKEN_CREATE command itself requires ns_capable(CAP_BPF)
within the BPF FS owning user namespace, rounding up the ns_capable()
story of BPF token.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support in netlink spec(netdev.yaml) for PID of the
NAPI thread. Add code generated from the spec.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://lore.kernel.org/r/170147335301.5260.11872351477120434501.stgit@anambiarhost.jf.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support in netlink spec(netdev.yaml) for interrupt number
among the NAPI attributes. Add code generated from the spec.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://lore.kernel.org/r/170147334210.5260.18178387869057516983.stgit@anambiarhost.jf.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support in netlink spec(netdev.yaml) for napi related information.
Add code generated from the spec.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://lore.kernel.org/r/170147333119.5260.7050639053080529108.stgit@anambiarhost.jf.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support in netlink spec(netdev.yaml) for queue information.
Add code generated from the spec.
Note: The "queue-type" attribute takes values 0 and 1 for rx
and tx queue type respectively.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://lore.kernel.org/r/170147330963.5260.2576294626647300472.stgit@anambiarhost.jf.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|