summaryrefslogtreecommitdiff
path: root/tools/kvm
AgeCommit message (Collapse)AuthorFilesLines
2018-11-27tools/kvm_stat: switch to python3Stefan Raspl1-1/+1
The current shebang does not work in environments that only support python3 and have no python2 installed. Plus there does not seem to be a way to support python2 and python3 at the same time. Since all known python3 issues were fixed, and as python3 is the way to go, let's switch over. Note that the code is still python2 compliant, so folks in bad use can simply revert the shebang. Suggested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-01tools/kvm_stat: cut down decimal places in update interval dialogStefan Raspl1-1/+1
We currently display the default number of decimal places for floats in _show_set_update_interval(), which is quite pointless. Cutting down to a single decimal place. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-30tools/kvm_stat: re-animate display of dead guestsStefan Raspl1-0/+10
When filtering by guest (interactive commands 'p'/'g'), and the respective guest was destroyed, detect when the guest is up again through the guest name if possible. I.e. when displaying events for a specific guest, it is not necessary anymore to restart kvm_stat in case the guest is restarted. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-08-30tools/kvm_stat: indicate dead guests as suchStefan Raspl1-3/+9
For destroyed guests, kvm_stat essentially freezes with the last data displayed. This is acceptable for users, in case they want to inspect the final data. But it looks a bit irritating. Therefore, detect this situation and display a respective indicator in the header. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-08-30tools/kvm_stat: handle guest removals more gracefullyStefan Raspl1-2/+9
When running with the DebugFS provider, removal of a guest can result in a negative CurAvg/s, which looks rather confusing. If so, suppress the body refresh and print a message instead. To reproduce, have at least one guest A completely booted. Then start another guest B (which generates a huge amount of events), then destroy B. On the next refresh, kvm_stat should display a whole lot of negative values in the CurAvg/s column. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-08-30tools/kvm_stat: don't reset stats when setting PID filter for debugfsStefan Raspl1-1/+0
When setting a PID filter in debugfs, we unnecessarily reset the statistics, although there is no reason to do so. This behavior was merely introduced with commit 9f114a03c6854f "tools/kvm_stat: add interactive command 'r'", most likely to mimic the behavior of the tracepoints provider in this respect. However, there are plenty of differences between the two providers, so there is no reason not to take advantage of the possibility to filter by PID without resetting the statistics. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-08-30tools/kvm_stat: fix updates for dead guestsStefan Raspl1-1/+10
With pid filtering active, when a guest is removed e.g. via virsh shutdown, successive updates produce garbage. Therefore, we add code to detect this case and prevent further body updates. Note that when displaying the help dialog via 'h' in this case, once we exit we're stuck with the 'Collecting data...' message till we remove the filter. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-08-30tools/kvm_stat: fix handling of invalid paths in debugfs providerStefan Raspl1-0/+8
When filtering by guest, kvm_stat displays garbage when the guest is destroyed - see sample output below. We add code to remove the invalid paths from the providers, so at least no more garbage is displayed. Here's a sample output to illustrate: kvm statistics - pid 13986 (foo) Event Total %Total CurAvg/s diagnose_258 -2 0.0 0 deliver_program_interruption -3 0.0 0 diagnose_308 -4 0.0 0 halt_poll_invalid -91 0.0 -6 deliver_service_signal -244 0.0 -16 halt_successful_poll -250 0.1 -17 exit_pei -285 0.1 -19 exit_external_request -312 0.1 -21 diagnose_9c -328 0.1 -22 userspace_handled -713 0.1 -47 halt_attempted_poll -939 0.2 -62 deliver_emergency_signal -3126 0.6 -208 halt_wakeup -7199 1.5 -481 exit_wait_state -7379 1.5 -493 diagnose_500 -56499 11.5 -3757 exit_null -85491 17.4 -5685 diagnose_44 -133300 27.1 -8874 exit_instruction -195898 39.8 -13037 Total -492063 Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-08-30tools/kvm_stat: fix python3 issuesStefan Raspl1-3/+3
Python3 returns a float for a regular division - switch to a division operator that returns an integer. Furthermore, filters return a generator object instead of the actual list - wrap result in yet another list, which makes it still work in both, Python2 and 3. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-28tools/kvm_stat: Remove unused functionCole Robinson1-3/+0
Unused since added in 18e8f4100 Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-and-tested-by: Stefan Raspl <stefan.raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-28tools/kvm_stat: Don't use deprecated file()Cole Robinson1-1/+1
$ python3 tools/kvm/kvm_stat/kvm_stat Traceback (most recent call last): File "tools/kvm/kvm_stat/kvm_stat", line 1668, in <module> main() File "tools/kvm/kvm_stat/kvm_stat", line 1639, in main assign_globals() File "tools/kvm/kvm_stat/kvm_stat", line 1618, in assign_globals for line in file('/proc/mounts'): NameError: name 'file' is not defined open() is the python3 way, and works on python2.6+ Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-and-tested-by: Stefan Raspl <stefan.raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-28tools/kvm_stat: Fix python3 syntaxCole Robinson1-2/+4
$ python3 tools/kvm/kvm_stat/kvm_stat File "tools/kvm/kvm_stat/kvm_stat", line 1137 def sortkey((_k, v)): ^ SyntaxError: invalid syntax Fix it in a way that's compatible with python2 and python3 Signed-off-by: Cole Robinson <crobinso@redhat.com> Tested-by: Stefan Raspl <stefan.raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-02-24tools/kvm_stat: print 'Total' line for multiple events onlyStefan Raspl1-1/+1
The 'Total' line looks a bit weird when we have a single event only. This can happen e.g. due to filters. Therefore suppress when there's only a single event in the output. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: group child events indented after parentStefan Raspl1-30/+59
We keep the current logic that sorts all events (parent and child), but re-shuffle the events afterwards, grouping the children after the respective parent. Note that the percentage column for child events gives the percentage of the parent's total. Since we rework the logic anyway, we modify the total average calculation to use the raw numbers instead of the (rounded) averages. Note that this can result in differing numbers (between total average and the sum of the individual averages) due to rounding errors. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: separate drilldown and fields filteringStefan Raspl1-43/+100
Drilldown (i.e. toggle display of child trace events) was implemented by overriding the fields filter. This resulted in inconsistencies: E.g. when drilldown was not active, adding a filter that also matches child trace events would not only filter fields according to the filter, but also add in the child trace events matching the filter. E.g. on x86, setting 'kvm_userspace_exit' as the fields filter after startup would result in display of kvm_userspace_exit(DCR), although that wasn't previously present - not exactly what one would expect from a filter. This patch addresses the issue by keeping drilldown and fields filter separate. While at it, we also fix a PEP8 issue by adding a blank line at one place (since we're in the area...). We implement this by adding a framework that also allows to define a taxonomy among the debugfs events to identify child trace events. I.e. drilldown using 'x' can now also work with debugfs. A respective parent- child relationship is only known for S390 at the moment, but could be added adjusting other platforms' ARCH.dbg_is_child() methods accordingly. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: eliminate extra guest/pid selection dialogStefan Raspl2-75/+39
We can do with a single dialog that takes both, pids and guest names. Note that we keep both interactive commands, 'p' and 'g' for now, to avoid confusion among users used to a specific key. While at it, we improve on some minor glitches regarding curses usage, e.g. cursor still visible when not supposed to be. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: mark private methods as suchStefan Raspl1-66/+66
Helps quite a bit reading the code when it's obvious when a method is intended for internal use only. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: fix debugfs handlingStefan Raspl1-14/+26
Te checks for debugfs assumed that debugfs is always mounted at /sys/kernel/debug - which is likely, but not guaranteed. This is addressed by checking /proc/mounts for the actual location. Furthermore, when debugfs was mounted, but the kvm module not loaded, a misleading error pointing towards debugfs not present was given. To reproduce, (a) run kvm_stat with debugfs mounted at a place different from /sys/kernel/debug (b) run kvm_stat with debugfs mounted but kvm module not loaded Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: print error on invalid regexStefan Raspl1-0/+3
Entering an invalid regular expression did not produce any indication of an error so far. To reproduce, press 'f' and enter 'foo(' (with an unescaped bracket). Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: fix crash when filtering out all non-child trace eventsStefan Raspl1-0/+6
When we apply a filter that will only leave child trace events, we receive a ZeroDivisionError when calculating the percentages. In that case, provide percentages based on child events only. To reproduce, run 'kvm_stat -f .*[\(].*'. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: avoid 'is' for equality checksMarc Hartmayer1-2/+2
Use '==' for equality checks and 'is' when comparing identities. An example where '==' and 'is' behave differently: >>> a = 4242 >>> a == 4242 True >>> a is 4242 False Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: use a more pythonic way to iterate over dictionariesMarc Hartmayer1-8/+8
If it's clear that the values of a dictionary will be used then use the '.items()' method. Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com> [Include fix for logging mode by Stefan Raspl] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: use a namedtuple for storing the valuesMarc Hartmayer1-12/+15
Use a namedtuple for storing the values as it allows to access the fields of a tuple via names. This makes the overall code much easier to read and to understand. Access by index is still possible as before. Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: simplify the sortkey functionMarc Hartmayer1-15/+8
The 'sortkey' function references a value in its enclosing scope (closure). This is not common practice for a sort key function so let's replace it. Additionally, the function 'sorted' has already a parameter for reversing the result therefore the inversion of the values is unneeded. The check for stats[x][1] is also superfluous as it's ensured that this value is initialized with 0. Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21tools/kvm_stat: sort '-f help' outputStefan Raspl1-10/+6
Sort the fields returned by specifying '-f help' on the command line. While at it, simplify the code a bit, indent the output and eliminate an extra blank line at the beginning. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-14tools/kvm_stat: add line for totalsStefan Raspl1-1/+8
Add a line for the total number of events and current average at the bottom of the body. Note that both values exclude child trace events. I.e. if drilldown is activated via interactive command 'x', only the totals are accounted, or we'd be counting these twice (see previous commit "tools/kvm_stat: fix child trace events accounting"). Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-14tools/kvm_stat: stop ignoring unhandled argumentsStefan Raspl1-1/+3
Unhandled arguments, which could easily include typos, are simply ignored. We should be strict to avoid undetected typos. To reproduce start kvm_stat with an extra argument, e.g. 'kvm_stat -d bnuh5ol' and note that this will actually work. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-14tools/kvm_stat: suppress usage information on command line errorsStefan Raspl1-8/+5
Errors while parsing the '-g' command line argument result in display of usage information prior to the error message. This is a bit confusing, as the command line is syntactically correct. To reproduce, run 'kvm_stat -g' and specify a non-existing or inactive guest. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-14tools/kvm_stat: handle invalid regular expressionsStefan Raspl1-0/+7
Passing an invalid regular expression on the command line results in a traceback. Note that interactive specification of invalid regular expressions is not affected To reproduce, run "kvm_stat -f '*'". Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-14tools/kvm_stat: add hint on '-f help' to man pageStefan Raspl1-1/+1
The man page update for this new functionality was omitted. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-14tools/kvm_stat: fix child trace events accountingStefan Raspl2-3/+5
Child trace events were included in calculation of the overall total, which is used for calculation of the percentages of the '%Total' column. However, the parent trace envents' stats summarize the child trace events, hence we'd incorrectly account for them twice, leading to slightly wrong stats. With this fix, we use the correct total. Consequently, the sum of the child trace events' '%Total' column values is identical to the respective value of the respective parent event. However, this also means that the sum of the '%Total' column values will aggregate to more than 100 percent. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-14tools/kvm_stat: fix extra handling of 'help' with fields filterStefan Raspl1-1/+2
Commit 67fbcd62f54d ("tools/kvm_stat: add '-f help' to get the available event list") added support for '-f help'. However, the extra handling of 'help' will also take effect when 'help' is specified as a regex in interactive mode via 'f'. This results in display of all events while only those matching this regex should be shown. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-14tools/kvm_stat: fix missing field update after filter changeStefan Raspl1-2/+2
When updating the fields filter, tracepoint events of fields previously not visible were not enabled, as TracepointProvider.update_fields() updated the member variable directly instead of using the setter, which triggers the event enable/disable. To reproduce, run 'kvm_stat -f kvm_exit', press 'c' to remove the filter, and notice that no add'l fields that do not match the regex 'kvm_exit' will appear. This issue was introduced by commit c469117df059 ("tools/kvm_stat: simplify initializers"). Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-14tools/kvm_stat: fix drilldown in events-by-guests modeStefan Raspl1-1/+1
When displaying debugfs events listed by guests, an attempt to switch to reporting of stats for individual child trace events results in garbled output. Reason is that when toggling drilldown, the update of the stats doesn't honor when events are displayed by guests, as indicated by Tui._display_guests. To reproduce, run 'kvm_stat -d' and press 'b' followed by 'x'. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-14tools/kvm_stat: fix command line option '-g'Stefan Raspl1-4/+6
Specifying a guest via '-g foo' always results in an error: $ kvm_stat -g foo Usage: kvm_stat [options] kvm_stat: error: Error while searching for guest "foo", use "-p" to specify a pid instead Reason is that Tui.get_pid_from_gname() is not static, as it is supposed to be. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-11-17Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-13/+17
Pull KVM updates from Radim Krčmář: "First batch of KVM changes for 4.15 Common: - Python 3 support in kvm_stat - Accounting of slabs to kmemcg ARM: - Optimized arch timer handling for KVM/ARM - Improvements to the VGIC ITS code and introduction of an ITS reset ioctl - Unification of the 32-bit fault injection logic - More exact external abort matching logic PPC: - Support for running hashed page table (HPT) MMU mode on a host that is using the radix MMU mode; single threaded mode on POWER 9 is added as a pre-requisite - Resolution of merge conflicts with the last second 4.14 HPT fixes - Fixes and cleanups s390: - Some initial preparation patches for exitless interrupts and crypto - New capability for AIS migration - Fixes x86: - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and after-reset state - Refined dependencies for VMX features - Fixes for nested SMI injection - A lot of cleanups" * tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits) KVM: s390: provide a capability for AIS state migration KVM: s390: clear_io_irq() requests are not expected for adapter interrupts KVM: s390: abstract conversion between isc and enum irq_types KVM: s390: vsie: use common code functions for pinning KVM: s390: SIE considerations for AP Queue virtualization KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup KVM: PPC: Book3S HV: Cosmetic post-merge cleanups KVM: arm/arm64: fix the incompatible matching for external abort KVM: arm/arm64: Unify 32bit fault injection KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared KVM: arm/arm64: vgic-its: New helper functions to free the caches KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device arm/arm64: KVM: Load the timer state when enabling the timer KVM: arm/arm64: Rework kvm_timer_should_fire KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit KVM: arm/arm64: Move phys_timer_emulate function KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12tools/kvm_stat: Add Python 3 support to kvm_statJeremy Cline1-13/+17
Make kvm_stat support Python 3 by changing the use of "print" to a function rather than a statement, switching from "iteritems" and "iterkeys" (removed in Python 3) to "items" and "keys" respectively, and decoding bytes to strings when dealing with text. With this change, kvm_stat is usable with Python 2.6 and greater. Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-26tools/kvm_stat: add '-f help' to get the available event listLin Ma1-2/+14
Signed-off-by: Lin Ma <lma@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26tools/kvm_stat: use variables instead of hard paths in help outputLin Ma1-3/+3
Using variables instead of hard paths makes the requirements information more accurate. Signed-off-by: Lin Ma <lma@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-27tools/kvm_stat: add new interactive command 'b'Stefan Raspl2-10/+79
Toggle display total number of events by guest (debugfs only). When switching to display of events by guest, field filters remain active. I.e. the number of events per guest reported considers only events matching the filters. Likewise with pid/guest filtering. Note that when switching to display of events by guest, DebugfsProvider remains to collect data for events as it did before, but the read() method summarizes the values by pid. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-27tools/kvm_stat: add new command line switch '-i'Stefan Raspl2-4/+34
It might be handy to display the full history of event stats to compare the current event distribution against any available historic data. Since we have that available for debugfs, we offer a respective command line option to display what's available. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-27tools/kvm_stat: fix error on interactive command 'g'Stefan Raspl1-1/+1
Fix an instance where print_all_gnames() is called without the mandatory argument, resulting in a stack trace. To reproduce, simply press 'g' in interactive mode. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: display guest list in pid/guest selection screensStefan Raspl1-12/+37
Display a (possibly inaccurate) list of all running guests. Note that we leave a bit of extra room above the list for potential error messages. Furthermore, we deliberately do not reject pids or guest names that are not in our list, as we cannot rule out that our fuzzy approach might be in error somehow. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: add new interactive command 'o'Stefan Raspl2-1/+18
Add new interactive command 'o' to toggle sorting by 'CurAvg/s' (default) and 'Total' columns. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: add new interactive command 's'Stefan Raspl2-8/+49
Add new command 's' to modify the update interval. Limited to a maximum of 25.5 sec and a minimum of 0.1 sec, since curses cannot handle longer and shorter delays respectively. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: add new interactive command 'h'Stefan Raspl2-5/+34
Display interactive commands reference on 'h'. While at it, sort interactive commands alphabetically in various places. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: rename 'Current' column to 'CurAvg/s'Stefan Raspl1-3/+3
'Current' can be misleading as it doesn't tell whether this is the amount of events in the last interval or the current average per second. Note that this necessitates widening the respective column by one more character. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: make heading look a bit more like 'top'Stefan Raspl1-1/+2
Print header in standout font just like the 'top' command does. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: display message indicating lack of eventsStefan Raspl1-0/+2
Give users some indication on the reason why no data is displayed on the screen yet. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>