| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
description, options for latency
Rename 'Switches' to 'Count' and document metrics shown for perf
sched latency output. Also add options possible with perf sched
latency.
Initially, after seeing the output of 'perf sched latency', the term
'Switches' seemed like it's the number of context switches-in for a
particular task, but upon going through the code, it was observed that
it's actually keeping track of number of times a delay was calculated so
that it is used in calculation of the average delay.
Actually, the switches here is a subset of number of context switches-in
because there are some cases where the count is not incremented in
switch-in handler 'add_sched_in_event'. For example when a task is
switched-in while it's state is not ready to run(!= THREAD_WAIT_CPU).
commit d9340c1db3f52460 ("perf sched: Display time in milliseconds,
reorganize output") changed it from the original count to switches.
So, renamed switches to count to make things a bit more clearer and
added the metrics description of latency in the document.
Reviewed-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240328090005.8321-1-vineethr@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We can't default to doing parallel tests as there are tests that compete
for the same resources and thus clash, for instance tests that put in
place 'perf probe' probes, that clean the probes without regard to other
tests needs, ARM64 coresight tests, Intel PT ones, etc.
So reintroduce --p/--parallel and make -S/--sequential the default.
We need to come up with infrastructure that state which tests can't run
in parallel because they need exclusive access to some resource,
something as simple as "probes" that would then avoid 'perf probe' tests
from running while other such test is running, or make the tests more
resilient, till then we can't use parallel mode as default.
While at it, document all these options in the 'perf test' man page.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reported-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Ziwm18BqIn_vc1vn@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Document that 'b' is used as a modifier to make an event use a BPF
counter.
Fixes: 01bd8efcec444468 ("perf stat: Introduce ':b' modifier")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416170014.985191-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add weight1, weight2 and weight3 fields to -F/--fields and their aliases
like 'ins_lat', 'p_stage_cyc' and 'retire_lat'. Note that they are in
the sort keys too but the difference is that output fields will sum up
the weight values and display the average.
In the sort key, users can see the distribution of weight value and I
think it's confusing we have local vs. global weight for the same weight.
For example, I experiment with mem-loads events to get the weights. On
my laptop, it seems only weight1 field is supported.
$ perf mem record -- perf test -w noploop
Let's look at the noploop function only. It has 7 samples.
$ perf script -F event,ip,sym,weight | grep noploop
# event weight ip sym
cpu/mem-loads,ldlat=30/P: 43 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 48 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 59 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 33 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
When you use the 'weight' sort key, it'd show entries with a separate
weight value separately. Also note that the first entry has 3 samples
with weight value 38, so they are displayed together and the weight
value is the sum of 3 samples (114 = 38 * 3).
$ perf report -n -s +weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Weight
0.53% 3 perf perf [.] noploop 114
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
If you use 'local_weight' sort key, you can see the actual weight.
$ perf report -n -s +local_weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Local Weight
0.53% 3 perf perf [.] noploop 38
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
But when you use the -F/--field option instead, you can see the average
weight for the while noploop function (as it won't group samples by
weight value and use the default 'comm,dso,sym' sort keys).
$ perf report -n -F +weight | grep -e Weight -e noploop
Warning:
--fields weight shows the average value unlike in the --sort key.
# Overhead Samples Weight1 Command Shared Object Symbol
1.23% 7 42.4 perf perf [.] noploop
The weight1 field shows the average value:
(38 * 3 + 59 + 48 + 43 + 33) / 7 = 42.4
Also it'd show the warning that 'weight' field has the average value.
Using 'weight1' can remove the warning.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240411181718.2367948-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Support capstone output for the '-F +brstackinsn' branch dump.
The new output is enabled with the new field 'brstackdisasm'.
This was possible before with --xed, but now also allow it for users
that don't have xed using the builtin capstone support.
Before:
perf record -b emacs -Q --batch '()'
perf script -F +brstackinsn
...
emacs 55778 1814366.755945: 151564 cycles:P: 7f0ab2d17192 intel_check_word.constprop.0+0x162 (/usr/lib64/ld-linux-x86-64.s> intel_check_word.constprop.0+237:
00007f0ab2d1711d insn: 75 e6 # PRED 3 cycles [3]
00007f0ab2d17105 insn: 73 51
00007f0ab2d17107 insn: 48 89 c1
00007f0ab2d1710a insn: 48 39 ca
00007f0ab2d1710d insn: 73 96
00007f0ab2d1710f insn: 48 8d 04 11
00007f0ab2d17113 insn: 48 d1 e8
00007f0ab2d17116 insn: 49 8d 34 c1
00007f0ab2d1711a insn: 44 3a 06
00007f0ab2d1711d insn: 75 e6 # PRED 3 cycles [6] 3.00 IPC
00007f0ab2d17105 insn: 73 51 # PRED 1 cycles [7] 1.00 IPC
00007f0ab2d17158 insn: 48 8d 50 01
00007f0ab2d1715c insn: eb 92 # PRED 1 cycles [8] 2.00 IPC
00007f0ab2d170f0 insn: 48 39 ca
00007f0ab2d170f3 insn: 73 b0 # PRED 1 cycles [9] 2.00 IPC
After (perf must be compiled with capstone):
perf script -F +brstackdisasm
...
emacs 55778 1814366.755945: 151564 cycles:P: 7f0ab2d17192 intel_check_word.constprop.0+0x162 (/usr/lib64/ld-linux-x86-64.s> intel_check_word.constprop.0+237:
00007f0ab2d1711d jne intel_check_word.constprop.0+0xd5 # PRED 3 cycles [3]
00007f0ab2d17105 jae intel_check_word.constprop.0+0x128
00007f0ab2d17107 movq %rax, %rcx
00007f0ab2d1710a cmpq %rcx, %rdx
00007f0ab2d1710d jae intel_check_word.constprop.0+0x75
00007f0ab2d1710f leaq (%rcx, %rdx), %rax
00007f0ab2d17113 shrq $1, %rax
00007f0ab2d17116 leaq (%r9, %rax, 8), %rsi
00007f0ab2d1711a cmpb (%rsi), %r8b
00007f0ab2d1711d jne intel_check_word.constprop.0+0xd5 # PRED 3 cycles [6] 3.00 IPC
00007f0ab2d17105 jae intel_check_word.constprop.0+0x128 # PRED 1 cycles [7] 1.00 IPC
00007f0ab2d17158 leaq 1(%rax), %rdx
00007f0ab2d1715c jmp intel_check_word.constprop.0+0xc0 # PRED 1 cycles [8] 2.00 IPC
00007f0ab2d170f0 cmpq %rcx, %rdx
00007f0ab2d170f3 jae intel_check_word.constprop.0+0x75 # PRED 1 cycles [9] 2.00 IPC
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/20240401210925.209671-3-ak@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The question of exactly when KPTI needs to be disabled comes up a lot
because it doesn't always need to be done. Add the relevant kernel
function and some examples that describe the behavior.
Also describe the interrupt requirement and that no error message will
be printed if this isn't met.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240312132508.423320-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now perf can show assembly instructions with libcapstone for x86, and the
capstone is better in general.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-6-changbin.du@huawei.com
|
|
Now '--insn-trace' accept a argument to specify the output format:
- raw: display raw instructions.
- disasm: display mnemonic instructions (if capstone is installed).
$ sudo perf script --insn-trace=raw
ls 1443864 [006] 2275506.209908875: 7f216b426100 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) insn: 48 89 e7
ls 1443864 [006] 2275506.209908875: 7f216b426103 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) insn: e8 e8 0c 00 00
ls 1443864 [006] 2275506.209908875: 7f216b426df0 _dl_start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) insn: f3 0f 1e fa
$ sudo perf script --insn-trace=disasm
ls 1443864 [006] 2275506.209908875: 7f216b426100 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) movq %rsp, %rdi
ls 1443864 [006] 2275506.209908875: 7f216b426103 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) callq _dl_start+0x0
ls 1443864 [006] 2275506.209908875: 7f216b426df0 _dl_start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) illegal instruction
ls 1443864 [006] 2275506.209908875: 7f216b426df4 _dl_start+0x4 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) pushq %rbp
ls 1443864 [006] 2275506.209908875: 7f216b426df5 _dl_start+0x5 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) movq %rsp, %rbp
ls 1443864 [006] 2275506.209908875: 7f216b426df8 _dl_start+0x8 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) pushq %r15
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-5-changbin.du@huawei.com
|
|
In addition to the 'insn' field, this adds a new field 'disasm' to
display mnemonic instructions instead of the raw code.
$ sudo perf script -F +disasm
perf-exec 1443864 [006] 2275506.209848: psb: psb offs: 0 0 [unknown] ([unknown])
perf-exec 1443864 [006] 2275506.209848: cbr: cbr: 41 freq: 4100 MHz (114%) 0 [unknown] ([unknown])
ls 1443864 [006] 2275506.209905: 1 branches:uH: 7f216b426100 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) movq %rsp, %rdi
ls 1443864 [006] 2275506.209908: 1 branches:uH: 7f216b426103 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) callq _dl_start+0x0
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-4-changbin.du@huawei.com
|
|
To get some fixes in the perf test and JSON metrics into the development
branch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Some platforms have 'cluster' topology and CPUs in the cluster will
share resources like L3 Cache Tag (for HiSilicon Kunpeng SoC) or L2
cache (for Intel Jacobsville). Currently parsing and building cluster
topology have been supported since [1].
perf stat has already supported aggregation for other topologies like
die or socket, etc. It'll be useful to aggregate per-cluster to find
problems like L3T bandwidth contention.
This patch add support for "--per-cluster" option for per-cluster
aggregation. Also update the docs and related test. The output will
be like:
[root@localhost tmp]# perf stat -a -e LLC-load --per-cluster -- sleep 5
Performance counter stats for 'system wide':
S56-D0-CLS158 4 1,321,521,570 LLC-load
S56-D0-CLS594 4 794,211,453 LLC-load
S56-D0-CLS1030 4 41,623 LLC-load
S56-D0-CLS1466 4 41,646 LLC-load
S56-D0-CLS1902 4 16,863 LLC-load
S56-D0-CLS2338 4 15,721 LLC-load
S56-D0-CLS2774 4 22,671 LLC-load
[...]
On a legacy system without cluster or cluster support, the output will
be look like:
[root@localhost perf]# perf stat -a -e cycles --per-cluster -- sleep 1
Performance counter stats for 'system wide':
S56-D0-CLS0 64 18,011,485 cycles
S7182-D0-CLS0 64 16,548,835 cycles
Note that this patch doesn't mix the cluster information in the outputs
of --per-core to avoid breaking any tools/scripts using it.
Note that perf recently supports "--per-cache" aggregation, but it's not
the same with the cluster although cluster CPUs may share some cache
resources. For example on my machine all clusters within a die share the
same L3 cache:
$ cat /sys/devices/system/cpu/cpu0/cache/index3/shared_cpu_list
0-31
$ cat /sys/devices/system/cpu/cpu0/topology/cluster_cpus_list
0-3
[1] commit c5e22feffdd7 ("topology: Represent clusters of CPUs within a die")
Tested-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: james.clark@arm.com
Cc: 21cnbao@gmail.com
Cc: prime.zeng@hisilicon.com
Cc: Jonathan.Cameron@huawei.com
Cc: fanghao11@huawei.com
Cc: linuxarm@huawei.com
Cc: tim.c.chen@intel.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240208024026.2691-1-yangyicong@huawei.com
|
|
Dump kmaps if using 'perf --debug kmaps' or verbose > 2 (e.g. -vvv) for
tools 'perf script' and 'perf report' if there is no browser.
Example:
$ perf --debug kmaps script 2>&1 >/dev/null | grep kvm.intel
build id event received for /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko: 0691d75e10e72ebbbd45a44c59f6d00a5604badf [20]
Map: 0-3a3 4f5d8 [kvm_intel].modinfo
Map: 0-5240 5f280 [kvm_intel]__versions
Map: 0-30 64 [kvm_intel].note.Linux
Map: 0-14 644c0 [kvm_intel].orc_header
Map: 0-5297 43680 [kvm_intel].rodata
Map: 0-5bee 3b837 [kvm_intel].text.unlikely
Map: 0-7e0 41430 [kvm_intel].noinstr.text
Map: 0-2080 713c0 [kvm_intel].bss
Map: 0-26 705c8 [kvm_intel].data..read_mostly
Map: 0-5888 6a4c0 [kvm_intel].data
Map: 0-22 70220 [kvm_intel].data.once
Map: 0-40 705f0 [kvm_intel].data..percpu
Map: 0-1685 41d20 [kvm_intel].init.text
Map: 0-4b8 6fd60 [kvm_intel].init.data
Map: 0-380 70248 [kvm_intel]__dyndbg
Map: 0-8 70218 [kvm_intel].exit.data
Map: 0-438 4f980 [kvm_intel]__param
Map: 0-5f5 4ca0f [kvm_intel].rodata.str1.1
Map: 0-3657 493b8 [kvm_intel].rodata.str1.8
Map: 0-e0 70640 [kvm_intel].data..ro_after_init
Map: 0-500 70ec0 [kvm_intel].gnu.linkonce.this_module
Map: ffffffffc13a7000-ffffffffc1421000 a0 /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko
The example above shows how the module section mappings are all wrong
except for the main .text mapping at 0xffffffffc13a7000.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240208085326.13432-2-adrian.hunter@intel.com
|
|
perf script exposes the evsel_name to python scripts as part of the data
passed to the sample or tracepoint handler function, and it passes the id and
stream_id to the throttled/unthrottled handler functions. This makes matching
throttle events and samples difficult.
To make this possible, this change exposes the sample id and stream_id values
to the script.
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: will@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240123103137.1890779-2-ben.gainey@arm.com
|
|
Add some (hopefully useful) hints to tips.txt
Also some minor corrections.
Would probably good to make it a reviewer rule that if generally useful
options are added the patch must add an example to tips.txt
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131021352.151440-1-ak@linux.intel.com
|
|
Add an option to write the 'perf list' output to a specific file. This
can avoid issues with debug output being written into the output stream.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
I found the hierarchy mode useful, but it's easy to make a typo when
using it. Let's add a short option for that.
Also update the documentation. :)
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240125055124.1579617-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"Add Namhyung Kim as tools/perf/ co-maintainer, we're taking turns
processing patches, switching roles from perf-tools to perf-tools-next
at each Linux release.
Data profiling:
- Associate samples that identify loads and stores with data
structures. This uses events available on Intel, AMD and others and
DWARF info:
# To get memory access samples in kernel for 1 second (on Intel)
$ perf mem record -a -K --ldlat=4 -- sleep 1
# Similar for the AMD (but it requires 6.3+ kernel for BPF filters)
$ perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000' -- sleep 1
Then, amongst several modes of post processing, one can do things like:
$ perf report -s type,typeoff --hierarchy --group --stdio
...
#
# Samples: 10K of events 'cpu/mem-loads,ldlat=4/P, cpu/mem-stores/P, dummy:u'
# Event count (approx.): 602758064
#
# Overhead Data Type / Data Type Offset
# ........................... ............................
#
26.09% 3.28% 0.00% long unsigned int
26.09% 3.28% 0.00% long unsigned int +0 (no field)
18.48% 0.73% 0.00% struct page
10.83% 0.02% 0.00% struct page +8 (lru.next)
3.90% 0.28% 0.00% struct page +0 (flags)
3.45% 0.06% 0.00% struct page +24 (mapping)
0.25% 0.28% 0.00% struct page +48 (_mapcount.counter)
0.02% 0.06% 0.00% struct page +32 (index)
0.02% 0.00% 0.00% struct page +52 (_refcount.counter)
0.02% 0.01% 0.00% struct page +56 (memcg_data)
0.00% 0.01% 0.00% struct page +16 (lru.prev)
15.37% 17.54% 0.00% (stack operation)
15.37% 17.54% 0.00% (stack operation) +0 (no field)
11.71% 50.27% 0.00% (unknown)
11.71% 50.27% 0.00% (unknown) +0 (no field)
$ perf annotate --data-type
...
Annotate type: 'struct cfs_rq' in [kernel.kallsyms] (13 samples):
============================================================================
samples offset size field
13 0 640 struct cfs_rq {
2 0 16 struct load_weight load {
2 0 8 unsigned long weight;
0 8 4 u32 inv_weight;
};
0 16 8 unsigned long runnable_weight;
0 24 4 unsigned int nr_running;
1 28 4 unsigned int h_nr_running;
...
$ perf annotate --data-type=page --group
Annotate type: 'struct page' in [kernel.kallsyms] (480 samples):
event[0] = cpu/mem-loads,ldlat=4/P
event[1] = cpu/mem-stores/P
event[2] = dummy:u
===================================================================================
samples offset size field
447 33 0 0 64 struct page {
108 8 0 0 8 long unsigned int flags;
319 13 0 8 40 union {
319 13 0 8 40 struct {
236 2 0 8 16 union {
236 2 0 8 16 struct list_head lru {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
236 2 0 8 16 struct {
236 1 0 8 8 void* __filler;
0 1 0 16 4 unsigned int mlock_count;
};
236 2 0 8 16 struct list_head buddy_list {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
236 2 0 8 16 struct list_head pcp_list {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
};
82 4 0 24 8 struct address_space* mapping;
1 7 0 32 8 union {
1 7 0 32 8 long unsigned int index;
1 7 0 32 8 long unsigned int share;
};
0 0 0 40 8 long unsigned int private;
};
This uses the existing annotate code, calling objdump to do the
disassembly, with improvements to avoid having this take too long,
but longer term a switch to a disassembler library, possibly
reusing code in the kernel will be pursued.
This is the initial implementation, please use it and report
impressions and bugs. Make sure the kernel-debuginfo packages match
the running kernel. The 'perf report' phase for non short perf.data
files may take a while.
There is a great article about it on LWN:
https://lwn.net/Articles/955709/ - "Data-type profiling for perf"
One last test I did while writing this text, on a AMD Ryzen 5950X,
using a distro kernel, while doing a simple 'find /' on an
otherwise idle system resulted in:
# uname -r
6.6.9-100.fc38.x86_64
# perf -vv | grep BPF_
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
bpf_skeletons: [ on ] # HAVE_BPF_SKEL
# rpm -qa | grep kernel-debuginfo
kernel-debuginfo-common-x86_64-6.6.9-100.fc38.x86_64
kernel-debuginfo-6.6.9-100.fc38.x86_64
#
# perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000'
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.199 MB perf.data (2913 samples) ]
#
# ls -la perf.data
-rw-------. 1 root root 2346486 Jan 9 18:36 perf.data
# perf evlist
ibs_op//
dummy:u
# perf evlist -v
ibs_op//: type: 11, size: 136, config: 0, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1
dummy:u: type: 1 (PERF_TYPE_SOFTWARE), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ADDR|CPU|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, mmap_data: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
#
# perf report -s type,typeoff --hierarchy --group --stdio
# Total Lost Samples: 0
#
# Samples: 2K of events 'ibs_op//, dummy:u'
# Event count (approx.): 1904553038
#
# Overhead Data Type / Data Type Offset
# ................... ............................
#
73.70% 0.00% (unknown)
73.70% 0.00% (unknown) +0 (no field)
3.01% 0.00% long unsigned int
3.00% 0.00% long unsigned int +0 (no field)
0.01% 0.00% long unsigned int +2 (no field)
2.73% 0.00% struct task_struct
1.71% 0.00% struct task_struct +52 (on_cpu)
0.38% 0.00% struct task_struct +2104 (rcu_read_unlock_special.b.blocked)
0.23% 0.00% struct task_struct +2100 (rcu_read_lock_nesting)
0.14% 0.00% struct task_struct +2384 ()
0.06% 0.00% struct task_struct +3096 (signal)
0.05% 0.00% struct task_struct +3616 (cgroups)
0.05% 0.00% struct task_struct +2344 (active_mm)
0.02% 0.00% struct task_struct +46 (flags)
0.02% 0.00% struct task_struct +2096 (migration_disabled)
0.01% 0.00% struct task_struct +24 (__state)
0.01% 0.00% struct task_struct +3956 (mm_cid_active)
0.01% 0.00% struct task_struct +1048 (cpus_ptr)
0.01% 0.00% struct task_struct +184 (se.group_node.next)
0.01% 0.00% struct task_struct +20 (thread_info.cpu)
0.00% 0.00% struct task_struct +104 (on_rq)
0.00% 0.00% struct task_struct +2456 (pid)
1.36% 0.00% struct module
0.59% 0.00% struct module +952 (kallsyms)
0.42% 0.00% struct module +0 (state)
0.23% 0.00% struct module +8 (list.next)
0.12% 0.00% struct module +216 (syms)
0.95% 0.00% struct inode
0.41% 0.00% struct inode +40 (i_sb)
0.22% 0.00% struct inode +0 (i_mode)
0.06% 0.00% struct inode +76 (i_rdev)
0.06% 0.00% struct inode +56 (i_security)
<SNIP>
perf top/report:
- Don't ignore job control, allowing control+Z + bg to work.
- Add s390 raw data interpretation for PAI (Processor Activity
Instrumentation) counters.
perf archive:
- Add new option '--all' to pack perf.data with DSOs.
- Add new option '--unpack' to expand tarballs.
Initialization speedups:
- Lazily initialize zstd streams to save memory when not using it.
- Lazily allocate/size mmap event copy.
- Lazy load kernel symbols in 'perf record'.
- Be lazier in allocating lost samples buffer in 'perf record'.
- Don't synthesize BPF events when disabled via the command line
(perf record --no-bpf-event).
Assorted improvements:
- Show note on AMD systems that the :p, :pp, :ppp and :P are all the
same, as IBS (Instruction Based Sampling) is used and it is
inherentely precise, not having levels of precision like in Intel
systems.
- When 'cycles' isn't available, fall back to the "task-clock" event
when not system wide, not to 'cpu-clock'.
- Add --debug-file option to redirect debug output, e.g.:
$ perf --debug-file /tmp/perf.log record -v true
- Shrink 'struct map' to under one cacheline by avoiding function
pointers for selecting if addresses are identity or DSO relative,
and using just a byte for some boolean struct members.
- Resolve the arch specific strerrno just once to use in
perf_env__arch_strerrno().
- Reduce memory for recording PERF_RECORD_LOST_SAMPLES event.
Assorted fixes:
- Fix the default 'perf top' usage on Intel hybrid systems, now it
starts with a browser showing the number of samples for Efficiency
(cpu_atom/cycles/P) and Performance (cpu_core/cycles/P). This
behaviour is similar on ARM64, with its respective set of
big.LITTLE processors.
- Fix segfault on build_mem_topology() error path.
- Fix 'perf mem' error on hybrid related to availability of mem event
in a PMU.
- Fix missing reference count gets (map, maps) in the db-export code.
- Avoid recursively taking env->bpf_progs.lock in the 'perf_env'
code.
- Use the newly introduced maps__for_each_map() to add missing
locking around iteration of 'struct map' entries.
- Parse NOTE segments until the build id is found, don't stop on the
first one, ELF files may have several such NOTE segments.
- Remove 'egrep' usage, its deprecated, use 'grep -E' instead.
- Warn first about missing libelf, not libbpf, that depends on
libelf.
- Use alternative to 'find ... -printf' as this isn't supported in
busybox.
- Address python 3.6 DeprecationWarning for string scapes.
- Fix memory leak in uniq() in libsubcmd.
- Fix man page formatting for 'perf lock'
- Fix some spelling mistakes.
perf tests:
- Fail shell tests that needs some symbol in perf itself if it is
stripped. These tests check if a symbol is resolved, if some hot
function is indeed detected by profiling, etc.
- The 'perf test sigtrap' test is currently failing on PREEMPT_RT,
skip it if sleeping spinlocks are detected (using BTF) and point to
the mailing list discussion about it. This test is also being
skipped on several architectures (powerpc, s390x, arm and aarch64)
due to other pending issues with intruction breakpoints.
- Adjust test case perf record offcpu profiling tests for s390.
- Fix 'Setup struct perf_event_attr' fails on s390 on z/VM guest,
addressing issues caused by the fallback from cycles to task-clock
done in this release.
- Fix mask for VG register in the user-regs test.
- Use shellcheck on 'perf test' shell scripts automatically to make
sure changes don't introduce things it flags as problematic.
- Add option to change objdump binary and allow it to be set via
'perf config'.
- Add basic 'perf script', 'perf list --json" and 'perf diff' tests.
- Basic branch counter support.
- Make DSO tests a suite rather than individual.
- Remove atomics from test_loop to avoid test failures.
- Fix call chain match on powerpc for the record+probe_libc_inet_pton
test.
- Improve Intel hybrid tests.
Vendor event files (JSON):
powerpc:
- Update datasource event name to fix duplicate events on IBM's
Power10.
- Add PVN for HX-C2000 CPU with Power8 Architecture.
Intel:
- Alderlake/rocketlake metric fixes.
- Update emeraldrapids events to v1.02.
- Update icelakex events to v1.23.
- Update sapphirerapids events to v1.17.
- Add skx, clx, icx and spr upi bandwidth metric.
AMD:
- Add Zen 4 memory controller events.
RISC-V:
- Add StarFive Dubhe-80 and Dubhe-90 JSON files.
https://www.starfivetech.com/en/site/cpu-u
- Add T-HEAD C9xx JSON file.
https://github.com/riscv-software-src/opensbi/blob/master/docs/platform/thead-c9xx.md
ARM64:
- Remove UTF-8 characters from cmn.json, that were causing build
failure in some distros.
- Add core PMU events and metrics for Ampere One X.
- Rename Ampere One's BPU_FLUSH_MEM_FAULT to GPC_FLUSH_MEM_FAULT
libperf:
- Rename several perf_cpu_map constructor names to clarify what they
really do.
- Ditto for some other methods, coping with some issues in their
semantics, like perf_cpu_map__empty() ->
perf_cpu_map__has_any_cpu_or_is_empty().
- Document perf_cpu_map__nr()'s behavior
perf stat:
- Exit if parse groups fails.
- Combine the -A/--no-aggr and --no-merge options.
- Fix help message for --metric-no-threshold option.
Hardware tracing:
ARM64 CoreSight:
- Bump minimum OpenCSD version to ensure a bugfix is present.
- Add 'T' itrace option for timestamp trace
- Set start vm addr of exectable file to 0 and don't ignore first
sample on the arm-cs-trace-disasm.py 'perf script'"
* tag 'perf-tools-for-v6.8-1-2024-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (179 commits)
MAINTAINERS: Add Namhyung as tools/perf/ co-maintainer
perf test: test case 'Setup struct perf_event_attr' fails on s390 on z/vm
perf db-export: Fix missing reference count get in call_path_from_sample()
perf tests: Add perf script test
libsubcmd: Fix memory leak in uniq()
perf TUI: Don't ignore job control
perf vendor events intel: Update sapphirerapids events to v1.17
perf vendor events intel: Update icelakex events to v1.23
perf vendor events intel: Update emeraldrapids events to v1.02
perf vendor events intel: Alderlake/rocketlake metric fixes
perf x86 test: Add hybrid test for conflicting legacy/sysfs event
perf x86 test: Update hybrid expectations
perf vendor events amd: Add Zen 4 memory controller events
perf stat: Fix hard coded LL miss units
perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event
perf env: Avoid recursively taking env->bpf_progs.lock
perf annotate: Add --insn-stat option for debugging
perf annotate: Add --type-stat option for debugging
perf annotate: Support event group display
perf annotate: Add --data-type option
...
|
|
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The --type-stat option is to be used with --data-type and to print
detailed failure reasons for the data type annotation.
$ perf annotate --data-type --type-stat
Annotate data type stats:
total 294, ok 116 (39.5%), bad 178 (60.5%)
-----------------------------------------------------------
30 : no_sym
40 : no_insn_ops
33 : no_mem_ops
63 : no_var
4 : no_typeinfo
8 : bad_offset
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-17-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Support data type annotation with new --data-type option. It internally
uses type sort key to collect sample histogram for the type and display
every members like below.
$ perf annotate --data-type
...
Annotate type: 'struct cfs_rq' in [kernel.kallsyms] (13 samples):
============================================================================
samples offset size field
13 0 640 struct cfs_rq {
2 0 16 struct load_weight load {
2 0 8 unsigned long weight;
0 8 4 u32 inv_weight;
};
0 16 8 unsigned long runnable_weight;
0 24 4 unsigned int nr_running;
1 28 4 unsigned int h_nr_running;
...
For simplicity it prints the number of samples per field for now.
But it should be easy to show the overhead percentage instead.
The number at the outer struct is a sum of the numbers of the inner
members. For example, struct cfs_rq got total 13 samples, and 2 came
from the load (struct load_weight) and 1 from h_nr_running. Similarly,
the struct load_weight got total 2 samples and they all came from the
weight field.
I've added two new flags in the symbol_conf for this. The
annotate_data_member is to get the members of the type. This is also
needed for perf report with typeoff sort key. The annotate_data_sample
is to update sample stats for each offset and used only in annotate.
Currently it only support stdio output mode, TUI support can be added
later.
Committer testing:
With the perf.data from the previous csets, a very simple, short
duration one:
# perf annotate --data-type
Annotate type: 'struct list_head' in [kernel.kallsyms] (1 samples):
============================================================================
samples offset size field
1 0 16 struct list_head {
0 0 8 struct list_head* next;
1 8 8 struct list_head* prev;
};
Annotate type: 'char' in [kernel.kallsyms] (1 samples):
============================================================================
samples offset size field
1 0 1 char ;
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-15-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The symoff sort key is to print symbol and offset of sample. This is
useful for data type profiling to show exact instruction in the function
which refers the data.
$ perf report -s type,sym,typeoff,symoff --hierarchy
...
# Overhead Data Type / Symbol / Data Type Offset / Symbol Offset
# .............. .....................................................
#
1.23% struct cfs_rq
0.84% update_blocked_averages
0.19% struct cfs_rq +336 (leaf_cfs_rq_list.next)
0.19% [k] update_blocked_averages+0x96
0.19% struct cfs_rq +0 (load.weight)
0.14% [k] update_blocked_averages+0x104
0.04% [k] update_blocked_averages+0x31c
0.17% struct cfs_rq +404 (throttle_count)
0.12% [k] update_blocked_averages+0x9d
0.05% [k] update_blocked_averages+0x1f9
0.08% struct cfs_rq +272 (propagate)
0.07% [k] update_blocked_averages+0x3d3
0.02% [k] update_blocked_averages+0x45b
...
Committer testing:
# perf report --stdio -s type,typeoff,symoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Data Type Data Type Offset Symbol Offset
# ........ ......... ................ .............
#
42.86% struct list_head struct list_head +8 (prev) [k] __list_del_entry_valid_or_report+0x7
28.57% (unknown) (unknown) +0 (no field) [.] _nl_intern_locale_data+0x25
14.29% char char +0 (no field) [k] strncpy_from_user+0xa5
14.29% (unknown) (unknown) +0 (no field) [.] _dl_lookup_symbol_x+0x50
#
# (Tip: To change sampling frequency to 100 Hz: perf record -F 100)
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-14-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The typeoff sort key shows the data type name, offset and the name of
the field. This is useful to see which field in the struct is accessed
most frequently.
$ perf report -s type,typeoff --hierarchy --stdio
...
# Overhead Data Type / Data Type Offset
# ............ ............................
#
...
1.23% struct cfs_rq
0.19% struct cfs_rq +404 (throttle_count)
0.19% struct cfs_rq +0 (load.weight)
0.19% struct cfs_rq +336 (leaf_cfs_rq_list.next)
0.09% struct cfs_rq +272 (propagate)
0.09% struct cfs_rq +196 (removed.nr)
0.09% struct cfs_rq +80 (curr)
0.09% struct cfs_rq +544 (lt_b_children_throttled)
0.06% struct cfs_rq +320 (rq)
Committer testing:
Again with the perf.data from the previous csets:
# perf report --stdio -s type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Data Type Data Type Offset
# ........ ......... ................
#
42.86% struct list_head struct list_head +8 (prev)
42.86% (unknown) (unknown) +0 (no field)
14.29% char char +0 (no field)
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
# perf report --stdio -s dso,type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Shared Object Data Type Data Type Offset
# ........ .................... ......... ................
#
42.86% [kernel.kallsyms] struct list_head struct list_head +8 (prev)
28.57% libc.so.6 (unknown) (unknown) +0 (no field)
14.29% [kernel.kallsyms] char char +0 (no field)
14.29% ld-linux-x86-64.so.2 (unknown) (unknown) +0 (no field)
#
# (Tip: If you have debuginfo enabled, try: perf report -s sym,srcline)
#
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'type' sort key is to aggregate hist entries by data type they
access. Add mem_type field to hist_entry struct to save the type. If
hist_entry__get_data_type() returns NULL, it'd use the 'unknown_type'
instance.
Committer testing:
Before:
# perf mem record sleep 2s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.037 MB perf.data (4 samples) ]
root@number:/home/acme/Downloads# perf report --stdio -s type
Error:
Unknown --sort key: `type'
Usage: perf report [<options>]
-s, --sort <key[,key2...]>
sort by key(s): overhead overhead_sys overhead_us overhead_guest_sys
overhead_guest_us overhead_children sample period
pid comm dso symbol parent cpu socket srcline srcfile
local_weight weight transaction trace symbol_size
dso_size cgroup cgroup_id ipc_null time code_page_size
local_ins_lat ins_lat local_p_stage_cyc p_stage_cyc
addr local_retire_lat retire_lat simd dso_from dso_to
symbol_from symbol_to mispredict abort in_tx cycles
srcline_from srcline_to ipc_lbr addr_from addr_to
symbol_daddr dso_daddr locked tlb mem snoop dcacheline
symbol_iaddr phys_daddr data_page_size blocked
#
After:
# perf report --stdio -s type
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Data Type
# ........ .........
#
100.00% (unknown)
#
# (Tip: Print event counts in CSV format with: perf stat -x,)
#
# rpm -q kernel-debuginfo
kernel-debuginfo-6.6.4-200.fc39.x86_64
# uname -r
6.6.4-200.fc39.x86_64
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org>
Cc: linux-trace-devel@vger.kernel.org>
Link: https://lore.kernel.org/r/20231213001323.718046-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -A or --no-aggr option disables aggregation of core events:
$ perf stat -A -e cycles,data_total -a true
Performance counter stats for 'system wide':
CPU0 1,287,665 cycles
CPU1 1,831,681 cycles
CPU2 27,345,998 cycles
CPU3 1,964,799 cycles
CPU4 236,174 cycles
CPU5 3,302,825 cycles
CPU6 9,201,446 cycles
CPU7 1,403,043 cycles
CPU0 110.90 MiB data_total
0.008961761 seconds time elapsed
The --no-merge option disables the aggregation of uncore events:
$ perf stat --no-merge -e cycles,data_total -a true
Performance counter stats for 'system wide':
38,482,778 cycles
15.04 MiB data_total [uncore_imc_free_running_1]
15.00 MiB data_total [uncore_imc_free_running_0]
0.005915155 seconds time elapsed
Having two options confuses users who generally don't appreciate the
difference in PMUs. Keep all the options but make it so they all
disable aggregation both of core and uncore events:
$ perf stat -A -e cycles,data_total -a true
Performance counter stats for 'system wide':
CPU0 85,878 cycles
CPU1 88,179 cycles
CPU2 60,872 cycles
CPU3 3,265,567 cycles
CPU4 82,357 cycles
CPU5 83,383 cycles
CPU6 84,156 cycles
CPU7 220,803 cycles
CPU0 2.38 MiB data_total [uncore_imc_free_running_0]
CPU0 2.38 MiB data_total [uncore_imc_free_running_1]
0.001397205 seconds time elapsed
Update the relevant 'perf stat' man page information.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231214060256.2094017-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This makes "CONTENTION" a top level section (rather than a subsection of
"INFO").
Fixes: 79079f21f50a501f ("perf lock: Add -k and -F options to 'contention' subcommand")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Nick Forrington <nick.forrington@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231102161117.49533-1-nick.forrington@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently, debug messages is output to stderr, add --debug-file option to
support redirection to a specified file.
Some test scenarios:
# perf --list-opts
--help --version --exec-path --html-path --paginate --no-pager --debugfs-dir --buildid-dir --list-cmds --list-opts --debug --debug-file
# perf --debug-file
No path given for --debug-file.
Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
# perf --debug-file /sys/perf.log record -v true
Open debug file '/sys/perf.log' failed: Permission denied
Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
# perf --debug-file /tmp/perf.log record -v true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (26 samples) ]
# cat /tmp/perf.log
DEBUGINFOD_URLS=
Using CPUID GenuineIntel-6-3E-4
nr_cblocks: 0
affinity: SYS
mmap flush: 1
comp level: 0
mmap size 528384B
Control descriptor is not initialized
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
symbol:unmap_start file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:unmap_complete file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:map_start file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:map_complete file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:reloc_start file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:reloc_complete file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:init_start file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:init_complete file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:lll_lock_wait_private file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:lll_lock_wait file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:setjmp file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:longjmp file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:longjmp_target file:(null) line:0 offset:0 return:0 lazy:(null)
failed to write feature HYBRID_TOPOLOGY
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231031105523.1472558-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There is already an existing config value for changing the objdump path,
so instead of having two values that do the same thing, make 'perf test'
use annotate.objdump as well.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/ZU5Cx4LTrB5q0sIG@kernel.org
Link: https://lore.kernel.org/r/20231113102327.695386-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
An AUX trace can contain timestamp, but in some situations, the hardware
trace module (e.g. Arm CoreSight) cannot decide the traced timestamp is
the same source with CPU's time, thus the decoder can not use the
timestamp trace for samples.
This patch introduces 'T' itrace option. If users know the platforms
they are working on have the same time counter with CPUs, users can
use this new option to tell a decoder for using timestamp trace as
kernel time.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231014074513.1668000-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
x86 core PMU exposes supported maximum precision level via max_precise
PMU capability. Although, AMD core PMU does not support precise mode,
certain core PMU events with precise_ip > 0 are allowed and forwarded to
IBS OP PMU.
Display a note about this in the 'perf report' header output and
document the details in the perf-list man page.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231107083331.901-2-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a 'perf config' variable that does the same thing as "perf test
--objdump <x>".
Also update the man page.
Committer testing:
# perf config test.objdump
# perf test "object code reading"
26: Object code reading : Ok
# perf config test.objdump=blah
# perf config test.objdump
test.objdump=blah
# perf test "object code reading"
26: Object code reading : FAILED!
# perf test -v "object code reading"
26: Object code reading :
--- start ---
test child forked, pid 600599
Looking at the vmlinux_path (8 entries long)
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
Parsing event 'cycles'
Using CPUID AuthenticAMD-25-21-0
mmap size 528384B
Reading object code for memory address: 0x4d9a02
File is: /home/acme/bin/perf
On file address is: 0xd9a02
Objdump command is: blah -z -d --start-address=0x4d9a02 --stop-address=0x4d9a82 /home/acme/bin/perf
objdump read too few bytes: 128
Bytes read differ from those read by objdump
buf1 (dso):
0x48 0x85 0xff 0x74 0x29 0xe8 0x94 0xdf 0x07 0x00 0x8b 0x73 0x1c 0x48 0x8b 0x43
0x08 0xeb 0xa5 0x0f 0x1f 0x00 0x48 0x8b 0x45 0xe8 0x64 0x48 0x2b 0x04 0x25 0x28
0x00 0x00 0x00 0x75 0x0f 0x48 0x8b 0x5d 0xf8 0xc9 0xc3 0x0f 0x1f 0x00 0x48 0x8b
0x43 0x08 0xeb 0x84 0xe8 0xc5 0x3e 0xf3 0xff 0x0f 0x1f 0x44 0x00 0x00 0x55 0x48
0x89 0xe5 0x41 0x56 0x41 0x55 0x49 0x89 0xd5 0x41 0x54 0x49 0x89 0xfc 0x53 0x48
0x89 0xf3 0x48 0x83 0xec 0x30 0x48 0x8b 0x7e 0x20 0x64 0x48 0x8b 0x04 0x25 0x28
0x00 0x00 0x00 0x48 0x89 0x45 0xd8 0x31 0xc0 0x48 0x89 0x75 0xb0 0x48 0xc7 0x45
0xb8 0x00 0x00 0x00 0x00 0x48 0xc7 0x45 0xc0 0x00 0x00 0x00 0x00 0xe8 0xad 0xfa
buf2 (objdump):
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
test child finished with -1
---- end ----
Object code reading: FAILED!
# perf config test.objdump=/usr/bin/objdump
# perf config test.objdump
test.objdump=/usr/bin/objdump
# perf test "object code reading"
26: Object code reading : Ok
#
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20231106151051.129440-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new branch filter, "counter", for the branch counter option. It is
used to mark the events which should be logged in the branch. If it is
applied with the -j option, the counters of all the events should be
logged in the branch. If the legacy kernel doesn't support the new
branch sample type, switching off the branch counter filter.
The stored counter values in each branch are displayed right after the
regular branch stack information via perf report -D.
Usage examples:
# perf record -e "{branch-instructions,branch-misses}:S" -j any,counter
Only the first event, branch-instructions, collect the LBR. Both
branch-instructions and branch-misses are marked as logged events. The
occurrences information of them can be found in the branch stack
extension space of each branch.
# perf record -e "{cpu/branch-instructions,branch_type=any/,cpu/branch-misses,branch_type=counter/}"
Only the first event, branch-instructions, collect the LBR. Only the
branch-misses event is marked as a logged event.
Committer notes:
I noticed 'perf test "Sample parsing"' failing, reported to the list and
Kan provided a patch that checks if the evsel has a leader and that
evsel->evlist is set, the comment in the source code further explains
it.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tinghao Zhang <tinghao.zhang@intel.com>
Link: https://lore.kernel.org/r/20231025201626.3000228-8-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -G/--cgroups option is to put sender and receiver in different
cgroups in order to measure cgroup context switch overheads.
Users need to make sure the cgroups exist and accessible. The following
example should the effect of this change. Please don't forget taskset
before the perf bench to measure cgroup switches properly. Otherwise
each task would run on a different CPU and generate cgroup switches
regardless of this change.
# perf stat -e context-switches,cgroup-switches \
> taskset -c 0 perf bench sched pipe -l 10000 > /dev/null
Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 10000':
20,001 context-switches
2 cgroup-switches
0.053449651 seconds time elapsed
0.011286000 seconds user
0.041869000 seconds sys
# perf stat -e context-switches,cgroup-switches \
> taskset -c 0 perf bench sched pipe -l 10000 -G AAA,BBB > /dev/null
Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 10000 -G AAA,BBB':
20,001 context-switches
20,001 cgroup-switches
0.052768627 seconds time elapsed
0.006284000 seconds user
0.046266000 seconds sys
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20231017202342.1353124-1-namhyung@kernel.org
|
|
The -G/--cgroup-filter is to limit lock contention collection on the
tasks in the specific cgroups only.
$ sudo ./perf lock con -abt -G /user.slice/.../vte-spawn-52221fb8-b33f-4a52-b5c3-e35d1e6fc0e0.scope \
./perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.174 [sec]
contended total wait max wait avg wait pid comm
4 114.45 us 60.06 us 28.61 us 214847 sched-messaging
2 111.40 us 60.84 us 55.70 us 214848 sched-messaging
2 106.09 us 59.42 us 53.04 us 214837 sched-messaging
1 81.70 us 81.70 us 81.70 us 214709 sched-messaging
68 78.44 us 6.83 us 1.15 us 214633 sched-messaging
69 73.71 us 2.69 us 1.07 us 214632 sched-messaging
4 72.62 us 60.83 us 18.15 us 214850 sched-messaging
2 71.75 us 67.60 us 35.88 us 214840 sched-messaging
2 69.29 us 67.53 us 34.65 us 214804 sched-messaging
2 69.00 us 68.23 us 34.50 us 214826 sched-messaging
...
Export cgroup__new() function as it's needed from outside.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230906174903.346486-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The --lock-cgroup option shows lock contention stats break down by
cgroups.
Add LOCK_AGGR_CGROUP mode and use it instead of use_cgroup field.
$ sudo ./perf lock con -ab --lock-cgroup sleep 1
contended total wait max wait avg wait cgroup
8 15.70 us 6.34 us 1.96 us /
2 1.48 us 747 ns 738 ns /user.slice/.../app.slice/app-gnome-google\x2dchrome-6442.scope
1 848 ns 848 ns 848 ns /user.slice/.../session.slice/org.gnome.Shell@x11.service
1 220 ns 220 ns 220 ns /user.slice/.../session.slice/pipewire-pulse.service
For now, the cgroup mode only works with BPF (-b).
Committer notes:
Remove -g as it is used in the other tools with a clear meaning of
collect/show callchains. As agreed with Namhyung off list.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230906174903.346486-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use BPF to collect statistics on the CPU usage based on perf BPF skeletons.
Example usage:
# perf kwork top -h
Usage: perf kwork top [<options>]
-b, --use-bpf Use BPF to measure task cpu usage
-C, --cpu <cpu> list of cpus to profile
-i, --input <file> input file name
-n, --name <name> event name to profile
-s, --sort <key[,key2...]>
sort by key(s): rate, runtime, tid
--time <str> Time span for analysis (start,stop)
#
# perf kwork -k sched top -b
Starting trace, Hit <Ctrl+C> to stop and report
^C
Total : 160702.425 ms, 8 cpus
%Cpu(s): 36.00% id, 0.00% hi, 0.00% si
%Cpu0 [|||||||||||||||||| 61.66%]
%Cpu1 [|||||||||||||||||| 61.27%]
%Cpu2 [||||||||||||||||||| 66.40%]
%Cpu3 [|||||||||||||||||| 61.28%]
%Cpu4 [|||||||||||||||||| 61.82%]
%Cpu5 [||||||||||||||||||||||| 77.41%]
%Cpu6 [|||||||||||||||||| 61.73%]
%Cpu7 [|||||||||||||||||| 63.25%]
PID SPID %CPU RUNTIME COMMMAND
-------------------------------------------------------------
0 0 38.72 8089.463 ms [swapper/1]
0 0 38.71 8084.547 ms [swapper/3]
0 0 38.33 8007.532 ms [swapper/0]
0 0 38.26 7992.985 ms [swapper/6]
0 0 38.17 7971.865 ms [swapper/4]
0 0 36.74 7447.765 ms [swapper/7]
0 0 33.59 6486.942 ms [swapper/2]
0 0 22.58 3771.268 ms [swapper/5]
9545 9351 2.48 447.136 ms sched-messaging
9574 9351 2.09 418.583 ms sched-messaging
9724 9351 2.05 372.407 ms sched-messaging
9531 9351 2.01 368.804 ms sched-messaging
9512 9351 2.00 362.250 ms sched-messaging
9514 9351 1.95 357.767 ms sched-messaging
9538 9351 1.86 384.476 ms sched-messaging
9712 9351 1.84 386.490 ms sched-messaging
9723 9351 1.83 380.021 ms sched-messaging
9722 9351 1.82 382.738 ms sched-messaging
9517 9351 1.81 354.794 ms sched-messaging
9559 9351 1.79 344.305 ms sched-messaging
9725 9351 1.77 365.315 ms sched-messaging
<SNIP>
# perf kwork -k sched top -b -n perf
Starting trace, Hit <Ctrl+C> to stop and report
^C
Total : 151563.332 ms, 8 cpus
%Cpu(s): 26.49% id, 0.00% hi, 0.00% si
%Cpu0 [ 0.01%]
%Cpu1 [ 0.00%]
%Cpu2 [ 0.00%]
%Cpu3 [ 0.00%]
%Cpu4 [ 0.00%]
%Cpu5 [ 0.00%]
%Cpu6 [ 0.00%]
%Cpu7 [ 0.00%]
PID SPID %CPU RUNTIME COMMMAND
-------------------------------------------------------------
9754 9754 0.01 2.303 ms perf
#
# perf kwork -k sched top -b -C 2,3,4
Starting trace, Hit <Ctrl+C> to stop and report
^C
Total : 48016.721 ms, 3 cpus
%Cpu(s): 27.82% id, 0.00% hi, 0.00% si
%Cpu2 [|||||||||||||||||||||| 74.68%]
%Cpu3 [||||||||||||||||||||| 71.06%]
%Cpu4 [||||||||||||||||||||| 70.91%]
PID SPID %CPU RUNTIME COMMMAND
-------------------------------------------------------------
0 0 29.08 4734.998 ms [swapper/4]
0 0 28.93 4710.029 ms [swapper/3]
0 0 25.31 3912.363 ms [swapper/2]
10248 10158 1.62 264.931 ms sched-messaging
10253 10158 1.62 265.136 ms sched-messaging
10158 10158 1.60 263.013 ms bash
10360 10158 1.49 243.639 ms sched-messaging
10413 10158 1.48 238.604 ms sched-messaging
10531 10158 1.47 234.067 ms sched-messaging
10400 10158 1.47 240.631 ms sched-messaging
10355 10158 1.47 230.586 ms sched-messaging
10377 10158 1.43 234.835 ms sched-messaging
10526 10158 1.42 232.045 ms sched-messaging
10298 10158 1.41 222.396 ms sched-messaging
10410 10158 1.38 221.853 ms sched-messaging
10364 10158 1.38 226.042 ms sched-messaging
10480 10158 1.36 213.633 ms sched-messaging
10370 10158 1.36 223.620 ms sched-messaging
10553 10158 1.34 217.169 ms sched-messaging
10291 10158 1.34 211.516 ms sched-messaging
10251 10158 1.34 218.813 ms sched-messaging
10522 10158 1.33 218.498 ms sched-messaging
10288 10158 1.33 216.787 ms sched-messaging
<SNIP>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20230812084917.169338-15-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Provide the following options for perf kwork top:
1. -C, --cpu <cpu> list of cpus to profile
2. -i, --input <file> input file name
3. -n, --name <name> event name to profile
4. -s, --sort <key[,key2...]> sort by key(s): rate, runtime, tid
5. --time <str> Time span for analysis (start,stop)
Example usage:
# perf kwork top -h
Usage: perf kwork top [<options>]
-C, --cpu <cpu> list of cpus to profile
-i, --input <file> input file name
-n, --name <name> event name to profile
-s, --sort <key[,key2...]>
sort by key(s): rate, runtime, tid
--time <str> Time span for analysis (start,stop)
# perf kwork top -C 2,4,5
Total : 51226.940 ms, 3 cpus
%Cpu(s): 92.59% id, 0.00% hi, 0.09% si
%Cpu2 [| 4.61%]
%Cpu4 [ 0.01%]
%Cpu5 [||||| 17.31%]
PID %CPU RUNTIME COMMMAND
----------------------------------------------------
0 99.98 17073.515 ms swapper/4
0 95.17 16250.874 ms swapper/2
0 82.62 14108.577 ms swapper/5
4342 21.70 3708.358 ms perf
16 0.13 22.296 ms rcu_preempt
75 0.02 4.261 ms kworker/2:1
98 0.01 2.540 ms jbd2/sda-8
61 0.01 3.404 ms kcompactd0
87 0.00 0.145 ms kworker/5:1H
73 0.00 0.596 ms kworker/5:1
41 0.00 0.041 ms ksoftirqd/5
40 0.00 0.718 ms migration/5
64 0.00 0.115 ms kworker/4:1
35 0.00 0.556 ms migration/4
353 0.00 1.143 ms sshd
26 0.00 1.665 ms ksoftirqd/2
25 0.00 0.662 ms migration/2
# perf kwork top -i perf.data
Total : 136601.588 ms, 8 cpus
%Cpu(s): 95.66% id, 0.04% hi, 0.05% si
%Cpu0 [ 0.02%]
%Cpu1 [ 0.01%]
%Cpu2 [| 4.61%]
%Cpu3 [ 0.04%]
%Cpu4 [ 0.01%]
%Cpu5 [||||| 17.31%]
%Cpu6 [ 0.51%]
%Cpu7 [||| 11.42%]
PID %CPU RUNTIME COMMMAND
----------------------------------------------------
0 99.98 17073.515 ms swapper/4
0 99.98 17072.173 ms swapper/1
0 99.93 17064.229 ms swapper/3
0 99.62 17011.013 ms swapper/0
0 99.47 16985.180 ms swapper/6
0 95.17 16250.874 ms swapper/2
0 88.51 15111.684 ms swapper/7
0 82.62 14108.577 ms swapper/5
4342 33.00 5644.045 ms perf
4344 0.43 74.351 ms perf
16 0.13 22.296 ms rcu_preempt
4345 0.05 10.093 ms perf
4343 0.05 8.769 ms perf
4341 0.02 4.882 ms perf
4095 0.02 4.605 ms kworker/7:1
75 0.02 4.261 ms kworker/2:1
120 0.01 1.909 ms systemd-journal
98 0.01 2.540 ms jbd2/sda-8
61 0.01 3.404 ms kcompactd0
667 0.01 2.542 ms kworker/u16:2
4340 0.00 1.052 ms kworker/7:2
97 0.00 0.489 ms kworker/7:1H
51 0.00 0.209 ms ksoftirqd/7
50 0.00 0.646 ms migration/7
76 0.00 0.753 ms kworker/6:1
45 0.00 0.572 ms migration/6
87 0.00 0.145 ms kworker/5:1H
73 0.00 0.596 ms kworker/5:1
41 0.00 0.041 ms ksoftirqd/5
40 0.00 0.718 ms migration/5
64 0.00 0.115 ms kworker/4:1
35 0.00 0.556 ms migration/4
353 0.00 2.600 ms sshd
74 0.00 0.205 ms kworker/3:1
33 0.00 1.576 ms kworker/3:0H
30 0.00 0.996 ms migration/3
26 0.00 1.665 ms ksoftirqd/2
25 0.00 0.662 ms migration/2
397 0.00 0.057 ms kworker/1:1
20 0.00 1.005 ms migration/1
2909 0.00 1.053 ms kworker/0:2
17 0.00 0.720 ms migration/0
15 0.00 0.039 ms ksoftirqd/0
# perf kwork top -n perf
Total : 136601.588 ms, 8 cpus
%Cpu(s): 95.66% id, 0.04% hi, 0.05% si
%Cpu0 [ 0.01%]
%Cpu1 [ 0.00%]
%Cpu2 [| 4.44%]
%Cpu3 [ 0.00%]
%Cpu4 [ 0.00%]
%Cpu5 [ 0.00%]
%Cpu6 [ 0.49%]
%Cpu7 [||| 11.38%]
PID %CPU RUNTIME COMMMAND
----------------------------------------------------
4342 15.74 2695.516 ms perf
4344 0.43 74.351 ms perf
4345 0.05 10.093 ms perf
4343 0.05 8.769 ms perf
4341 0.02 4.882 ms perf
# perf kwork top -s tid
Total : 136601.588 ms, 8 cpus
%Cpu(s): 95.66% id, 0.04% hi, 0.05% si
%Cpu0 [ 0.02%]
%Cpu1 [ 0.01%]
%Cpu2 [| 4.61%]
%Cpu3 [ 0.04%]
%Cpu4 [ 0.01%]
%Cpu5 [||||| 17.31%]
%Cpu6 [ 0.51%]
%Cpu7 [||| 11.42%]
PID %CPU RUNTIME COMMMAND
----------------------------------------------------
0 99.62 17011.013 ms swapper/0
0 99.98 17072.173 ms swapper/1
0 95.17 16250.874 ms swapper/2
0 99.93 17064.229 ms swapper/3
0 99.98 17073.515 ms swapper/4
0 82.62 14108.577 ms swapper/5
0 99.47 16985.180 ms swapper/6
0 88.51 15111.684 ms swapper/7
15 0.00 0.039 ms ksoftirqd/0
16 0.13 22.296 ms rcu_preempt
17 0.00 0.720 ms migration/0
20 0.00 1.005 ms migration/1
25 0.00 0.662 ms migration/2
26 0.00 1.665 ms ksoftirqd/2
30 0.00 0.996 ms migration/3
33 0.00 1.576 ms kworker/3:0H
35 0.00 0.556 ms migration/4
40 0.00 0.718 ms migration/5
41 0.00 0.041 ms ksoftirqd/5
45 0.00 0.572 ms migration/6
50 0.00 0.646 ms migration/7
51 0.00 0.209 ms ksoftirqd/7
61 0.01 3.404 ms kcompactd0
64 0.00 0.115 ms kworker/4:1
73 0.00 0.596 ms kworker/5:1
74 0.00 0.205 ms kworker/3:1
75 0.02 4.261 ms kworker/2:1
76 0.00 0.753 ms kworker/6:1
87 0.00 0.145 ms kworker/5:1H
97 0.00 0.489 ms kworker/7:1H
98 0.01 2.540 ms jbd2/sda-8
120 0.01 1.909 ms systemd-journal
353 0.00 2.600 ms sshd
397 0.00 0.057 ms kworker/1:1
667 0.01 2.542 ms kworker/u16:2
2909 0.00 1.053 ms kworker/0:2
4095 0.02 4.605 ms kworker/7:1
4340 0.00 1.052 ms kworker/7:2
4341 0.02 4.882 ms perf
4342 33.00 5644.045 ms perf
4343 0.05 8.769 ms perf
4344 0.43 74.351 ms perf
4345 0.05 10.093 ms perf
# perf kwork top --time 128800,
Total : 53495.122 ms, 8 cpus
%Cpu(s): 94.71% id, 0.09% hi, 0.09% si
%Cpu0 [ 0.07%]
%Cpu1 [ 0.04%]
%Cpu2 [|| 8.49%]
%Cpu3 [ 0.09%]
%Cpu4 [ 0.02%]
%Cpu5 [ 0.06%]
%Cpu6 [ 0.12%]
%Cpu7 [|||||| 21.24%]
PID %CPU RUNTIME COMMMAND
----------------------------------------------------
0 99.96 3981.363 ms swapper/4
0 99.94 3978.955 ms swapper/1
0 99.91 9329.375 ms swapper/5
0 99.87 4906.829 ms swapper/3
0 99.86 9028.064 ms swapper/6
0 98.67 3928.161 ms swapper/0
0 91.17 8388.432 ms swapper/2
0 78.65 7125.602 ms swapper/7
4342 29.42 2675.198 ms perf
16 0.18 16.817 ms rcu_preempt
4345 0.09 8.183 ms perf
4344 0.04 4.290 ms perf
4343 0.03 2.844 ms perf
353 0.03 2.600 ms sshd
4095 0.02 2.702 ms kworker/7:1
120 0.02 1.909 ms systemd-journal
98 0.02 2.540 ms jbd2/sda-8
61 0.02 1.886 ms kcompactd0
667 0.02 1.011 ms kworker/u16:2
75 0.02 2.693 ms kworker/2:1
4341 0.01 1.838 ms perf
30 0.01 0.788 ms migration/3
26 0.01 1.665 ms ksoftirqd/2
20 0.01 0.752 ms migration/1
2909 0.01 0.604 ms kworker/0:2
4340 0.00 0.635 ms kworker/7:2
97 0.00 0.214 ms kworker/7:1H
51 0.00 0.209 ms ksoftirqd/7
50 0.00 0.646 ms migration/7
76 0.00 0.602 ms kworker/6:1
45 0.00 0.366 ms migration/6
87 0.00 0.145 ms kworker/5:1H
40 0.00 0.446 ms migration/5
35 0.00 0.318 ms migration/4
74 0.00 0.205 ms kworker/3:1
33 0.00 0.080 ms kworker/3:0H
25 0.00 0.448 ms migration/2
397 0.00 0.057 ms kworker/1:1
17 0.00 0.365 ms migration/0
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20230812084917.169338-14-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some common tools for collecting statistics on CPU usage, such as top,
obtain statistics from timer interrupt sampling, and then periodically
read statistics from /proc/stat.
This method has some deviations:
1. In the tick interrupt, the time between the last tick and the current
tick is counted in the current task. However, the task may be running
only part of the time.
2. For each task, the top tool periodically reads the /proc/{PID}/status
information. For tasks with a short life cycle, it may be missed.
In conclusion, the top tool cannot accurately collect statistics on the
CPU usage and running time of tasks.
The statistical method based on sched_switch tracepoint can accurately
calculate the CPU usage of all tasks. This method is applicable to
scenarios where performance comparison data is of high precision.
Example usage:
# perf kwork
Usage: perf kwork [<options>] {record|report|latency|timehist|top}
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-k, --kwork <kwork> list of kwork to profile (irq, softirq, workqueue, sched, etc)
-v, --verbose be more verbose (show symbol address, etc)
# perf kwork -k sched record -- perf bench sched messaging -g 1 -l 10000
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 1 groups == 40 processes run
Total time: 14.074 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 15.886 MB perf.data (129472 samples) ]
# perf kwork top
Total : 115708.178 ms, 8 cpus
%Cpu(s): 9.78% id
%Cpu0 [||||||||||||||||||||||||||| 90.55%]
%Cpu1 [||||||||||||||||||||||||||| 90.51%]
%Cpu2 [|||||||||||||||||||||||||| 88.57%]
%Cpu3 [||||||||||||||||||||||||||| 91.18%]
%Cpu4 [||||||||||||||||||||||||||| 91.09%]
%Cpu5 [||||||||||||||||||||||||||| 90.88%]
%Cpu6 [|||||||||||||||||||||||||| 88.64%]
%Cpu7 [||||||||||||||||||||||||||| 90.28%]
PID %CPU RUNTIME COMMMAND
----------------------------------------------------
4113 22.23 3221.547 ms sched-messaging
4105 21.61 3131.495 ms sched-messaging
4119 21.53 3120.937 ms sched-messaging
4103 21.39 3101.614 ms sched-messaging
4106 21.37 3095.209 ms sched-messaging
4104 21.25 3077.269 ms sched-messaging
4115 21.21 3073.188 ms sched-messaging
4109 21.18 3069.022 ms sched-messaging
4111 20.78 3010.033 ms sched-messaging
4114 20.74 3007.073 ms sched-messaging
4108 20.73 3002.137 ms sched-messaging
4107 20.47 2967.292 ms sched-messaging
4117 20.39 2955.335 ms sched-messaging
4112 20.34 2947.080 ms sched-messaging
4118 20.32 2942.519 ms sched-messaging
4121 20.23 2929.865 ms sched-messaging
4110 20.22 2930.078 ms sched-messaging
4122 20.15 2919.542 ms sched-messaging
4120 19.77 2866.032 ms sched-messaging
4116 19.72 2857.660 ms sched-messaging
4127 16.19 2346.334 ms sched-messaging
4142 15.86 2297.600 ms sched-messaging
4141 15.62 2262.646 ms sched-messaging
4136 15.41 2231.408 ms sched-messaging
4130 15.38 2227.008 ms sched-messaging
4129 15.31 2217.692 ms sched-messaging
4126 15.21 2201.711 ms sched-messaging
4139 15.19 2200.722 ms sched-messaging
4137 15.10 2188.633 ms sched-messaging
4134 15.06 2182.082 ms sched-messaging
4132 15.02 2177.530 ms sched-messaging
4131 14.73 2131.973 ms sched-messaging
4125 14.68 2125.439 ms sched-messaging
4128 14.66 2122.255 ms sched-messaging
4123 14.65 2122.113 ms sched-messaging
4135 14.56 2107.144 ms sched-messaging
4133 14.51 2103.549 ms sched-messaging
4124 14.27 2066.671 ms sched-messaging
4140 14.17 2052.251 ms sched-messaging
4138 13.81 2000.361 ms sched-messaging
0 11.42 1652.009 ms swapper/2
0 11.35 1641.694 ms swapper/6
0 9.71 1405.108 ms swapper/7
0 9.48 1372.338 ms swapper/1
0 9.44 1366.013 ms swapper/0
0 9.11 1318.382 ms swapper/5
0 8.90 1287.582 ms swapper/4
0 8.81 1274.356 ms swapper/3
4100 2.61 379.328 ms perf
4101 1.16 169.487 ms perf-exec
151 0.65 94.741 ms systemd-resolve
249 0.36 53.030 ms sd-resolve
153 0.14 21.405 ms systemd-timesyn
1 0.10 16.200 ms systemd
16 0.09 15.785 ms rcu_preempt
4102 0.06 9.727 ms perf
4095 0.03 5.464 ms kworker/7:1
98 0.02 3.231 ms jbd2/sda-8
353 0.02 4.115 ms sshd
75 0.02 3.889 ms kworker/2:1
73 0.01 1.552 ms kworker/5:1
64 0.01 1.591 ms kworker/4:1
74 0.01 1.952 ms kworker/3:1
61 0.01 2.608 ms kcompactd0
397 0.01 1.602 ms kworker/1:1
69 0.01 1.817 ms kworker/1:1H
10 0.01 2.553 ms kworker/u16:0
2909 0.01 2.684 ms kworker/0:2
1211 0.00 0.426 ms kworker/7:0
97 0.00 0.153 ms kworker/7:1H
51 0.00 0.100 ms ksoftirqd/7
120 0.00 0.856 ms systemd-journal
76 0.00 1.414 ms kworker/6:1
46 0.00 0.246 ms ksoftirqd/6
45 0.00 0.164 ms migration/6
41 0.00 0.098 ms ksoftirqd/5
40 0.00 0.207 ms migration/5
86 0.00 1.339 ms kworker/4:1H
36 0.00 0.252 ms ksoftirqd/4
35 0.00 0.090 ms migration/4
31 0.00 0.156 ms ksoftirqd/3
30 0.00 0.073 ms migration/3
26 0.00 0.180 ms ksoftirqd/2
25 0.00 0.085 ms migration/2
21 0.00 0.106 ms ksoftirqd/1
20 0.00 0.118 ms migration/1
302 0.00 1.440 ms systemd-logind
17 0.00 0.132 ms migration/0
15 0.00 0.255 ms ksoftirqd/0
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20230812084917.169338-10-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The kwork_class type of sched is added to support recording and parsing of
sched_switch events.
As follows:
# perf kwork -h
Usage: perf kwork [<options>] {record|report|latency|timehist}
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-k, --kwork <kwork> list of kwork to profile (irq, softirq, workqueue, sched, etc)
-v, --verbose be more verbose (show symbol address, etc)
# perf kwork -k sched record true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.083 MB perf.data (47 samples) ]
# perf evlist
sched:sched_switch
dummy:HG
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20230812084917.169338-8-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add missing report, latency and timehist subcommands to the document.
Fixes: f98919ec4fccdacf ("perf kwork: Implement 'report' subcommand")
Fixes: ad3d9f7a929ab2df ("perf kwork: Implement perf kwork latency")
Fixes: bcc8b3e88d6fa1a3 ("perf kwork: Implement perf kwork timehist")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20230812084917.169338-3-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
User space tasks can migrate between CPUs, we need to track side-band
events for all CPUs.
The specific scenarios are as follows:
CPU0 CPU1
perf record -C 0 start
taskA starts to be created and executed
-> PERF_RECORD_COMM and PERF_RECORD_MMAP
events only deliver to CPU1
......
|
migrate to CPU0
|
Running on CPU0 <----------/
...
perf record -C 0 stop
Now perf samples the PC of taskA. However, perf does not record the
PERF_RECORD_COMM and PERF_RECORD_MMAP events of taskA.
Therefore, the comm and symbols of taskA cannot be parsed.
The solution is to record sideband events for all CPUs when tracing
selected CPUs. Because this modifies the default behavior, add related
comments to the perf record man page.
The sys_perf_event_open invoked is as follows:
# perf --debug verbose=3 record -e cpu-clock -C 1 true
<SNIP>
Opening: cpu-clock
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0 (PERF_COUNT_SW_CPU_CLOCK)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID|LOST
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 5
Opening: dummy:u
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x9 (PERF_COUNT_SW_DUMMY)
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|IDENTIFIER
read_format ID|LOST
inherit 1
exclude_kernel 1
exclude_hv 1
mmap 1
comm 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid -1 cpu 4 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid -1 cpu 5 group_fd -1 flags 0x8 = 12
sys_perf_event_open: pid -1 cpu 6 group_fd -1 flags 0x8 = 13
sys_perf_event_open: pid -1 cpu 7 group_fd -1 flags 0x8 = 14
<SNIP>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230904023340.12707-5-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix the format of unordered lists so the can wrap properly.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230718085242.3090797-1-changbin.du@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add perf_dlfilter_fns.al_cleanup() to do addr_location__exit() on data
passed via perf_dlfilter_fns.resolve_address().
Add dlfilter-test-api-v2 to the "dlfilter C API" test to test it.
Update documentation, clarifying that data returned by APIs should not
be dereferenced after filter_event() and filter_event_early() return.
Fixes: 0dd5041c9a0eaf8c ("perf addr_location: Add init/exit/copy functions")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230731091857.10681-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
New features like the BPF --filter support in perf record have made the
BPF event functionality somewhat redundant. As shown by commit
fcb027c1a4f6 ("perf tools: Revert enable indices setting syntax for BPF
map") and commit 14e4b9f4289a ("perf trace: Raw augmented syscalls fix
libbpf 1.0+ compatibility") the BPF event support hasn't been well
maintained and it adds considerable complexity in areas like event
parsing, not least as '/' is a separator for event modifiers as well as
in paths.
This patch removes support in the event parser for BPF events and then
the associated functions are removed. This leads to the removal of whole
source files like bpf-loader.c. Removing support means that augmented
syscalls in perf trace is broken, this will be fixed in a later commit
adding support using BPF skeletons.
The removal of BPF events causes an unused label warning from flex
generated code, so update build to ignore it:
```
util/parse-events-flex.c:2704:1: error: label ‘find_rule’ defined but not used [-Werror=unused-label]
2704 | find_rule: /* we branch to this label when backing up */
```
Committer notes:
Extracted from a larger patch that was also removing the support for
linking with libllvm and libclang, that were an alternative to using an
external clang execution to compile the .c event source code into BPF
bytecode.
Testing it:
# perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Bad event or PMU
Unabled to find PMU or event on a PMU of 'home'
Initial error:
event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Cannot find PMU `home'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230810184853.2860737-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'it' should be 'is' here, fix it.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230727105001.261420-1-xiujianfeng@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This just adds the initial "workload", a call to libc's usleep(1000us)
function:
$ perf stat --null perf bench uprobe all
# Running uprobe/baseline benchmark...
# Executed 1000 usleep(1000) calls
Total time: 1053533 usecs
1053.533 usecs/op
Performance counter stats for 'perf bench uprobe all':
1.061042896 seconds time elapsed
0.001079000 seconds user
0.006499000 seconds sys
$
More entries will be added using a BPF skel to add various uprobes to
the usleep() function.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andre Fredette <anfredet@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Dave Tucker <datucker@redhat.com>
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20230719204910.539044-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To avoid formatting failures for example in CSV output due to debug
messages, add --output option to put the result in a file.
Unfortunately the short -o option was taken by the --owner already.
$ sudo ./perf lock con -ab --output lock-out.txt -v sleep 1
Looking at the vmlinux_path (8 entries long)
symsrc__init: cannot get elf header.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
$ head lock-out.txt
contended total wait max wait avg wait type caller
3 76.79 us 26.89 us 25.60 us rwlock:R ep_poll_callback+0x2d
0xffffffff9a23f4b5 _raw_read_lock_irqsave+0x45
0xffffffff99bbd4dd ep_poll_callback+0x2d
0xffffffff999029f3 __wake_up_common+0x73
0xffffffff99902b82 __wake_up_common_lock+0x82
0xffffffff99fa5b1c sock_def_readable+0x3c
0xffffffff9a11521d unix_stream_sendmsg+0x18d
0xffffffff99f9fc9c sock_sendmsg+0x5c
Suggested-by: Ian Rogers <irogers@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230628200141.2739587-4-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Sometimes we want to process the output by external programs. Let's add
the -x option to specify the field separator like perf stat.
$ sudo ./perf lock con -ab -x, sleep 1
# output: contended, total wait, max wait, avg wait, type, caller
19, 194232, 21415, 10222, spinlock, process_one_work+0x1f0
15, 162748, 23843, 10849, rwsem:R, do_user_addr_fault+0x40e
4, 86740, 23415, 21685, rwlock:R, ep_poll_callback+0x2d
1, 84281, 84281, 84281, mutex, iwl_mvm_async_handlers_wk+0x135
8, 67608, 27404, 8451, spinlock, __queue_work+0x174
3, 58616, 31125, 19538, rwsem:W, do_mprotect_pkey+0xff
3, 52953, 21172, 17651, rwlock:W, do_epoll_wait+0x248
2, 30324, 19704, 15162, rwsem:R, do_madvise+0x3ad
1, 24619, 24619, 24619, spinlock, rcu_core+0xd4
The first line is a comment that shows the output format. Each line is
separated by the given string ("," in this case). The time is printed
in nsec without the unit so that it can be parsed easily.
The characters can be used in the output like (":", "+" and ".") are not
allowed for the -x option.
$ ./perf lock con -x:
Cannot use the separator that is already used
Usage: perf lock contention [<options>]
-x, --field-separator <separator>
print result in CSV format with custom separator
The stacktraces are printed in the same line separated by ":". The
header is updated to show the stacktrace. Also the debug output is
added at the end as a comment.
$ sudo ./perf lock con -abv -x, -F wait_total sleep 1
Looking at the vmlinux_path (8 entries long)
symsrc__init: cannot get elf header.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
# output: total wait, type, caller, stacktrace
37134, spinlock, rcu_core+0xd4, 0xffffffff9d0401e4 _raw_spin_lock_irqsave+0x44: 0xffffffff9c738114 rcu_core+0xd4: ...
21213, spinlock, raw_spin_rq_lock_nested+0x1b, 0xffffffff9d0407c0 _raw_spin_lock+0x30: 0xffffffff9c6d9cfb raw_spin_rq_lock_nested+0x1b: ...
20506, rwlock:W, ep_done_scan+0x2d, 0xffffffff9c9bc4dd ep_done_scan+0x2d: 0xffffffff9c9bd5f1 do_epoll_wait+0x6d1: ...
18044, rwlock:R, ep_poll_callback+0x2d, 0xffffffff9d040555 _raw_read_lock_irqsave+0x45: 0xffffffff9c9bc81d ep_poll_callback+0x2d: ...
17890, rwlock:W, do_epoll_wait+0x47b, 0xffffffff9c9bd39b do_epoll_wait+0x47b: 0xffffffff9c9be9ef __x64_sys_epoll_wait+0x6d1: ...
12114, spinlock, futex_wait_queue+0x60, 0xffffffff9d0407c0 _raw_spin_lock+0x30: 0xffffffff9d037cae __schedule+0xbe: ...
# debug: total=7, bad=0, bad_task=0, bad_stack=0, bad_time=0, bad_data=0
Also note that some field (like lock symbols) can be empty.
$ sudo ./perf lock con -abl -x, -E 10 sleep 1
# output: contended, total wait, max wait, avg wait, address, symbol, type
6, 275025, 61764, 45837, ffff9dcc9f7d60d0, , spinlock
18, 87716, 11196, 4873, ffff9dc540059000, , spinlock
2, 6472, 5499, 3236, ffff9dcc7f730e00, rq_lock, spinlock
3, 4429, 2341, 1476, ffff9dcc7f7b0e00, rq_lock, spinlock
3, 3974, 1635, 1324, ffff9dcc7f7f0e00, rq_lock, spinlock
4, 3290, 1326, 822, ffff9dc5f4e2cde0, , rwlock
3, 2894, 1023, 964, ffffffff9e0d7700, rcu_state, spinlock
1, 2567, 2567, 2567, ffff9dcc7f6b0e00, rq_lock, spinlock
4, 1259, 596, 314, ffff9dc69c2adde0, , rwlock
1, 934, 934, 934, ffff9dcc7f670e00, rq_lock, spinlock
Acked-by: Ian Rogers <irogers@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230628200141.2739587-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
-target has been deprecated since Clang 3.4 in 2013. Use the preferred
--target=bpf form instead. This matches how we use --target= in
scripts/Makefile.clang.
Signed-off-by: Fangrui Song <maskray@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: llvm@lists.linux.dev
Cc: Ingo Molnar <mingo@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://github.com/llvm/llvm-project/commit/274b6f0c87a6a1798de0a68135afc7f95def6277
Link: https://lore.kernel.org/r/20230624002708.1907962-1-maskray@google.com
[ resolved a conflict with GEN_VMLINUX_H changes ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Document the threshold behavior for -M/--metrics.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20230519063719.1029596-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch adds support for "--per-cache" option for aggregation at a
particular cache level and documents the same.
Following is the output of 'perf stat' with aggregation at L3 for the
event "ls_dmnd_fills_from_sys.ext_cache_remote" on a dual socket 3rd
Generation EPYC Processor (2 x 64C/128T - 16 LLCs) when running
hackbench pinned to 4 LLCs:
$ sudo perf stat --per-cache=L3 -a -e ls_dmnd_fills_from_sys.ext_cache_remote -- \
taskset -c 0-15,64-79,128-143,192-207 \
perf bench sched messaging -p -t -l 100000 -g 8
...
Performance counter stats for 'system wide':
S0-D0-L3-ID0 16 9,500,803 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID8 16 6,338,099 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID16 16 355,005 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID24 16 22,067 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID32 16 16,321 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID40 16 11,619 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID48 16 4,238 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID56 16 31,158 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID64 16 28,242,452 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID72 16 22,906,973 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID80 16 72,898 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID88 16 56,907 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID96 16 20,456 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID104 16 40,913 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID112 16 78,113 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID120 16 37,897 ls_dmnd_fills_from_sys.ext_cache_remote
Also support 'perf stat record' and 'perf stat report' with the ability
to specify a different cache level to aggregate data at when running
'perf stat report'.
$ sudo perf stat record --per-cache=L2 -a -e ls_dmnd_fills_from_sys.ext_cache_remote -- \
taskset -c 0-15,64-79,128-143,192-207 \
perf bench sched messaging -p -t -l 100000 -g 8
...
Performance counter stats for 'system wide':
S0-D0-L2-ID0 2 1,442,061 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L2-ID1 2 1,548,994 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L2-ID2 2 1,553,557 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L2-ID3 2 1,420,122 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L2-ID4 2 1,465,461 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L2-ID5 2 1,455,153 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L2-ID6 2 1,595,237 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L2-ID7 2 1,499,321 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L2-ID8 2 1,919,025 ls_dmnd_fills_from_sys.ext_cache_remote
...
S1-D1-L2-ID127 2 21,295 ls_dmnd_fills_from_sys.ext_cache_remote
$ sudo perf stat report --per-cache=L3
Performance counter stats for 'perf stat record --per-cache=L2 -a -e ls_dmnd_fills_from_sys.ext_cache_remote --\
taskset -c 0-15,64-79,128-143,192-207 \
perf bench sched messaging -p -t -l 100000 -g 8':
S0-D0-L3-ID0 16 11,979,906 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID8 16 14,257,202 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID16 16 377,484 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID24 16 27,224 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID32 16 26,816 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID40 16 14,461 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID48 16 10,499 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID56 16 53,817 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID64 16 27,361,987 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID72 16 37,299,024 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID80 16 84,125 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID88 16 64,561 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID96 16 13,403 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID104 16 20,138 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID112 16 93,220 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID120 16 35,465 ls_dmnd_fills_from_sys.ext_cache_remote
On the above system, the domain covered by S0-D0-L3-ID0 contains
S0-D0-L2-ID0 to S0-D0-L2-ID7, the corresponding count for L3-ID0 is
equal to the sum of counts for L2-ID0 to L2-ID7.
Add documentation for the newly introduced "--per-cache" option.
Suggested-by: Gautham Shenoy <gautham.shenoy@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wen Pu <puwen@hygon.cn>
Link: https://lore.kernel.org/r/20230517172745.5833-5-kprateek.nayak@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
