Age | Commit message (Collapse) | Author | Files | Lines |
|
Implement automatic switching of XDP programs and execution modes if
needed by a test. This makes it much simpler to write a test as it
only has to say what XDP program it needs if it is not the default
one. This also makes it possible to remove the initial explicit
attachment of the XDP program as well as the explicit mode switch in
the code. These are now handled by the same code that just checks if a
switch is necessary, so no special cases are needed.
The default XDP program for all tests is one that sends all packets to
the AF_XDP socket. If you need another one, please use the new
function test_spec_set_xdp_prog() to specify what XDP programs and
maps to use for this test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-16-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Automatically restore the default packet stream if needed at the end
of each test. This so that test writers do not forget to do this.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-15-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make the thread dispatching code common by unifying the dual and
single thread dispatcher code. This so we do not have to add code in
two places in upcoming commits.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-14-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a new test where some of the packets are not passed to the AF_XDP
socket and instead get a XDP_DROP verdict. This is important as it
tests the recycling mechanism of the buffer pool. If a packet is not
sent to the AF_XDP socket, the buffer the packet resides in is instead
recycled so it can be used again without the round-trip to user
space. The test introduces a new XDP program that drops every other
packet.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-13-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Get rid of the built-in XDP program that was part of the old libbpf
code in xsk.c and replace it with an eBPF program build using the
framework by all the other bpf selftests. This will form the base for
adding more programs in later commits.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-12-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Remove unnecessary code in the control path. This is located in the
file xsk.c that was moved from libbpf when the xsk support there was
deprecated. Some of the code there is not needed anymore as the
selftests are only guaranteed to run on the kernel it is shipped
with. Therefore, all the code that has to deal with compatibility of
older kernels can be dropped and also any other function that is not
of any use for the tests.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-11-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Load and attach the XDP program only once per XDP mode that is being
executed. Today, the XDP program is loaded and attached for every
test, then unloaded, which takes a long time on real NICs, since they
have to reconfigure their HW, in contrast to veth. The test suite now
completes in 21 seconds, instead of 207 seconds previously on my
machine. This is a speed-up of around 10x.
This is accomplished by moving the XDP loading from the worker threads
to the main thread and replacing the XDP loading interfaces of xsk.c
that was taken from the xsk support in libbpf, with something more
explicit that is more useful for these tests. Instead, the relevant
file descriptors and ifindexes are just passed down to the new
functions.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Remove the namespaces used as they fill no function. This will
simplify the code for speeding up the tests in the following commits.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Print the correct error codes when exiting the test suite due to some
terminal error. Some of these had a switched sign and some of them
printed zero instead of errno.
Fixes: facb7cb2e909 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Submit the correct number of frames in the function
xsk_populate_fill_ring(). For the tests that set the flag
use_addr_for_fill, uninitialized buffers were sent to the fill ring
following the correct ones. This has no impact on the tests, since
they only use the ones that were initialized. But for correctness,
this should be fixed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Print the correct payload when the packet dump option is selected. The
network to host conversion was forgotten and the payload was
erronously declared to be an int instead of an unsigned int.
Fixes: facb7cb2e909 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Variable ret is compared with less than zero even though it was set as u32.
So u32 to int conversion is needed.
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20221105183656.86077-1-tegongkang@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Merge in the left-over fixes before the net-next pull-request.
Conflicts:
drivers/net/ethernet/mediatek/mtk_ppe.c
ae3ed15da588 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear")
9d8cb4c096ab ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc")
https://lore.kernel.org/all/6cb6893b-4921-a068-4c30-1109795110bb@tessares.net/
kernel/bpf/helpers.c
8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF")
5679ff2f138f ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF")
8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types")
https://lore.kernel.org/all/20221003201957.13149-1-daniel@iogearbox.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a double free at exit of the test suite.
Fixes: a693ff3ed561 ("selftests/xsk: Add support for executing tests on physical device")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20220929090133.7869-1-magnus.karlsson@gmail.com
|
|
Introduce new mode to xdpxceiver responsible for testing AF_XDP zero
copy support of driver that serves underlying physical device. When
setting up test suite, determine whether driver has ZC support or not by
trying to bind XSK ZC socket to the interface. If it succeeded,
interpret it as ZC support being in place and do softirq and busy poll
tests for zero copy mode.
Note that Rx dropped tests are skipped since ZC path is not touching
rx_dropped stat at all.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-7-maciej.fijalkowski@intel.com
|
|
For single threaded poll tests call pthread_kill() from main thread so
that we are sure worker thread has finished its job and it is possible
to proceed with next test types from test suite. It was observed that on
some platforms it takes a bit longer for worker thread to exit and next
test case sees device as busy in this case.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-6-maciej.fijalkowski@intel.com
|
|
Currently, architecture of xdpxceiver is designed strictly for
conducting veth based tests. Veth pair is created together with a
network namespace and one of the veth interfaces is moved to the
mentioned netns. Then, separate threads for Tx and Rx are spawned which
will utilize described setup.
Infrastructure described in the paragraph above can not be used for
testing AF_XDP support on physical devices. That testing will be
conducted on a single network interface and same queue. Xskxceiver
needs to be extended to distinguish between veth tests and physical
interface tests.
Since same iface/queue id pair will be used by both Tx/Rx threads for
physical device testing, Tx thread, which happen to run after the Rx
thread, is going to create XSK socket with shared umem flag. In order to
track this setting throughout the lifetime of spawned threads, introduce
'shared_umem' boolean variable to struct ifobject and set it to true
when xdpxceiver is run against physical device. In such case, UMEM size
needs to be doubled, so half of it will be used by Rx thread and other
half by Tx thread. For two step based test types, value of XSKMAP
element under key 0 has to be updated as there is now another socket for
the second step. Also, to avoid race conditions when destroying XSK
resources, move this activity to the main thread after spawned Rx and Tx
threads have finished its job. This way it is possible to gracefully
remove shared umem without introducing synchronization mechanisms.
To run xsk selftests suite on physical device, append "-i $IFACE" when
invoking test_xsk.sh. For veth based tests, simply skip it. When "-i
$IFACE" is in place, under the hood test_xsk.sh will use $IFACE for both
interfaces supplied to xdpxceiver, which in turn will interpret that
this execution of test suite is for a physical device.
Note that currently this makes it possible only to test SKB and DRV mode
(in case underlying device has native XDP support). ZC testing support
is added in a later patch.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-5-maciej.fijalkowski@intel.com
|
|
In order to prepare xdpxceiver for physical device testing, let us
introduce default Rx pkt stream. Reason for doing it is that physical
device testing will use a UMEM with a doubled size where half of it will
be used by Tx and other half by Rx. This means that pkt addresses will
differ for Tx and Rx streams. Rx thread will initialize the
xsk_umem_info::base_addr that is added here so that pkt_set(), when
working on Rx UMEM will add this offset and second half of UMEM space
will be used. Note that currently base_addr is 0 on both sides. Future
commit will do the mentioned initialization.
Previously, veth based testing worked on separate UMEMs, so single
default stream was fine.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-3-maciej.fijalkowski@intel.com
|
|
Currently, xdpxceiver assumes that underlying device supports XDP in
native mode - it is fine by now since tests can run only on a veth pair.
Future commit is going to allow running test suite against physical
devices, so let us query the device if it is capable of running XDP
programs in native mode. This way xdpxceiver will not try to run
TEST_MODE_DRV if device being tested is not supporting it.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-2-maciej.fijalkowski@intel.com
|
|
Commit 1034b03e54ac ("selftests: xsk: Simplify cleanup of ifobjects")
removed close on netns fd, which is not correct, so let us restore it.
Fixes: 1034b03e54ac ("selftests: xsk: Simplify cleanup of ifobjects")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220830133905.9945-1-maciej.fijalkowski@intel.com
|
|
Fix few issues found when building and running test_progs in
release mode.
First, potentially uninitialized idx variable in xskxceiver,
force-initialize to zero to satisfy compiler.
Few instances of defining uprobe trigger functions break in release mode
unless marked as noinline, due to being static. Add noinline to make
sure everything works.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-5-andrii@kernel.org
|
|
Poll test case was not testing all the functionality of the poll feature
in the test suite. This patch updates the poll test case which contains 2
test cases to test the RX and the TX poll functionality and additional 2
more test cases to check the timeout feature of the poll event.
Poll test suite has 4 test cases:
1. TEST_TYPE_RX_POLL: Check if RX path POLLIN function works as expect.
TX path can use any method to send the traffic.
2. TEST_TYPE_TX_POLL: Check if TX path POLLOUT function works as expect.
RX path can use any method to receive the traffic.
3. TEST_TYPE_POLL_RXQ_EMPTY: Call poll function with parameter POLLIN on
empty RX queue will cause timeout. If timeout then test case passes.
4. TEST_TYPE_POLL_TXQ_FULL: When TX queue is filled and packets are not
cleaned by the kernel then if we invoke the poll function with POLLOUT
it should trigger timeout.
Signed-off-by: Shibin Koikkara Reeny <shibin.koikkara.reeny@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20220803144354.98122-1-shibin.koikkara.reeny@intel.com
|
|
Recently, xsk part of libbpf was moved to selftests/bpf directory and
lives on its own because there is an AF_XDP testing application that
needs it called xdpxceiver. That name makes it a bit hard to indicate
who maintains it as there are other XDP samples in there, whereas this
one is strictly about AF_XDP.
Do s/xdpxceiver/xskxceiver so that it will be easier to figure out who
maintains it. A follow-up patch will correct MAINTAINERS file.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220707111613.49031-2-maciej.fijalkowski@intel.com
|