summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/net/forwarding/devlink_lib.sh
AgeCommit message (Collapse)AuthorFilesLines
2021-10-25selftests: mlxsw: Reduce test run timeIdo Schimmel1-6/+0
Instead of iterating over all the available trap policers, only perform the tests with three policers: The first, the last and the one in the middle of the range. On a Spectrum-3 system, this reduces the run time from almost an hour to a few minutes. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25selftests/net: Use kselftest skip code for skipped testsPo-Hsu Lin1-6/+9
There are several test cases in the net directory are still using exit 0 or exit 1 when they need to be skipped. Use kselftest framework skip code instead so it can help us to distinguish the return status. Criterion to filter out what should be fixed in net directory: grep -r "exit [01]" -B1 | grep -i skip This change might cause some false-positives if people are running these test scripts directly and only checking their return codes, which will change from 0 to 4. However I think the impact should be small as most of our scripts here are already using this skip code. And there will be no such issue if running them with the kselftest framework. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20210823085854.40216-1-po-hsu.lin@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-14testing: selftests: net: forwarding: add devlink-required functionality to ↵Oleksandr Mazur1-0/+26
test (hard) dropped stats field Add devlink_trap_drop_packets_get function, as well as test that are used to verify devlink (hard) dropped stats functionality works. Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-09selftests: devlink_lib: Fix bouncing of netdevsim DEVLINK_DEVPetr Machata1-1/+1
In the commit referenced below, a check was added to devlink_lib that asserts the existence of a devlink device referenced by $DEVLINK_DEV. Unfortunately, several netdevsim tests point DEVLINK_DEV at a device that does not exist at the time that devlink_lib is sourced. Thus these tests spuriously fail. Fix this by introducing an override. By setting DEVLINK_DEV to an empty string, the user declares their intention to handle DEVLINK_DEV management on their own. In all netdevsim tests that use devlink_lib and set DEVLINK_DEV, set instead an empty DEVLINK_DEV just before sourcing devlink_lib, and set it to the correct value right afterwards. Fixes: 557c4d2f780c ("selftests: devlink_lib: add check for devlink device existence") Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-28selftests: devlink_lib: add check for devlink device existenceJiri Pirko1-0/+6
If user passes devlink handle over DEVLINK_DEV variable, check if the device exists. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20210527105515.790330-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-01selftests: forwarding: devlink_lib: Support port-less topologiesPetr Machata1-1/+1
Some selftests may not need any actual ports. Technically those are not forwarding selftests, but devlink_lib can still be handy. Fall back on NETIF_NO_CABLE in those cases. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-01selftests: forwarding: devlink_lib: Add devlink_cell_size_get()Petr Machata1-0/+6
Add a helper that answers the cell size of the devlink device. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-01selftests: forwarding: devlink_lib: Split devlink_..._set() into save & setPetr Machata1-11/+51
Changing pool type from static to dynamic causes reinterpretation of threshold values. They therefore need to be saved before pool type is changed, then the pool type can be changed, and then the new values need to be set up. For that reason, set cannot subsume save, because it would be saving the wrong thing, with possibly a nonsensical value, and restore would then fail to restore the nonsensical value. Thus extract a _save() from each of the relevant _set()'s. This way it is possible to save everything up front, then to tweak it, and then restore in the required order. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-16selftests: mlxsw: Test policers' occupancyIdo Schimmel1-0/+5
Test that policers shared by different tc filters are correctly reference counted by observing policers' occupancy via devlink-resource. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-06-01selftests: mlxsw: Add test for control packetsIdo Schimmel1-0/+23
Generate packets matching the various control traps and check that the traps' stats increase accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-17selftests: mlxsw: Do not hard code trap group nameIdo Schimmel1-2/+6
It can be derived dynamically from the trap's name, so drop it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-17selftests: devlink_lib: Remove double blank lineIdo Schimmel1-1/+0
One blank line is enough. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-31selftests: mlxsw: Add test cases for devlink-trap policersIdo Schimmel1-0/+6
Add test cases that verify that each registered packet trap policer: * Honors that imposed limitations of rate and burst size * Able to police trapped packets to the specified rate * Able to police trapped packets to the specified burst size * Able to be unbound from its trap group Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-31selftests: netdevsim: Add test cases for devlink-trap policersIdo Schimmel1-0/+37
Add test cases for packet trap policer set / show commands as well as for the binding of these policers to packet trap groups. Both good and bad flows are tested for maximum coverage. v2: * Add test case with new 'fail_trap_policer_set' knob * Add test case for partially modified trap group Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: devlink_lib: Add devlink port helpersShalom Toledo1-0/+16
Add two devlink port helpers: * devlink port get by netdev * devlink cpu port get Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: devlink_lib: Check devlink info command is supportedShalom Toledo1-0/+6
Sanity check for devlink info command. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24selftests: pass pref and handle to devlink_trap_drop_* helpersJiri Pirko1-2/+5
Currently the helpers assume pref 1 and handle 101. Make that explicit and pass the values from callers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08selftests: forwarding: devlink: Add functionality for trap exceptions testAmit Cohen1-0/+12
Add common part of all the tests - check devlink status to ensure that packets were trapped. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08selftests: devlink: Make devlink_trap_cleanup() more genericAmit Cohen1-1/+2
Add proto parameter in order to enable the use of devlink_trap_cleanup() in tests that use IPv6 protocol. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08selftests: devlink: Export functions to devlink libraryAmit Cohen1-0/+42
l2_drops_test() is used to check that drop traps are functioning as intended. Currently it is only used in the layer 2 test, but it is also useful for the layer 3 test introduced in the subsequent patch. l2_drops_cleanup() is used to clean configurations and kill mausezahn proccess. Export the functions to the common devlink library to allow it to be re-used by future tests. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17selftests: forwarding: devlink_lib: Add devlink-trap helpersIdo Schimmel1-0/+163
Add helpers to interact with devlink-trap, such as setting the action of a trap and retrieving statistics. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17selftests: forwarding: devlink_lib: Allow tests to define devlink deviceIdo Schimmel1-12/+14
For tests that create their network interfaces dynamically or do not use interfaces at all (as with netdevsim) it is useful to define their own devlink device instead of deriving it from the first network interface. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29selftests: forwarding: devlink_lib: Add shared buffer helpersPetr Machata1-0/+95
Add helpers to obtain, set, and restore a pool size, and a port-pool and tc-pool threshold. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29selftests: forwarding: devlink_lib: Simplify deduction of DEVLINK_DEVPetr Machata1-3/+2
Use devlink -j and jq for more accurate querying. Use cut -f-2 instead of rev-cut-rev combo. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29selftests: forwarding: devlink_lib: Avoid double sourcing of lib.shPetr Machata1-10/+0
Don't source lib.sh twice and make the script work with ifnames passed on the command line. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28selftests: net: forwarding: change devlink resource support checkingJiri Pirko1-1/+1
As for the others, check help message output to find out if devlink supports "resource" object. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30selftests: forwarding: Add devlink_lib.shPetr Machata1-0/+108
This helper library contains wrappers to devlink functionality agnostic to the underlying device. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> [petrm@mellanox.com: Split this out from another patch.] Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-16 01:55:54 +0300