Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
genksyms: adjust the output format to modpost
kbuild: stop merging *.symversions
kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
modpost: extract symbol versions from *.cmd files
modpost: add sym_find_with_module() helper
modpost: change the license of EXPORT_SYMBOL to bool type
modpost: remove left-over cross_compile declaration
kbuild: record symbol versions in *.cmd files
kbuild: generate a list of objects in vmlinux
modpost: move *.mod.c generation to write_mod_c_files()
modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
scripts/prune-kernel: Use kernel-install if available
kbuild: factor out the common installation code into scripts/install.sh
modpost: split new_symbol() to symbol allocation and hash table addition
modpost: make sym_add_exported() always allocate a new symbol
modpost: make multiple export error
modpost: dump Module.symvers in the same order of modules.order
modpost: traverse the namespace_list in order
modpost: use doubly linked list for dump_lists
modpost: traverse unresolved symbols in order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture
we supported that has no MMU implementation, but there are still a
few architectures (arm, m68k, riscv, sh and xtensa) that support
CPUs with and without an MMU.
- A series to add a generic ticket spinlock that can be shared by
most architectures with a working cmpxchg or ll/sc type atomic,
including the conversion of riscv, csky and openrisc. This series
is also a prerequisite for the loongarch64 architecture port that
will come as a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers"
* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
h8300: remove stale bindings and symlink
sparc: add asm/stat.h to UAPI compile-test coverage
powerpc: add asm/stat.h to UAPI compile-test coverage
mips: add asm/stat.h to UAPI compile-test coverage
riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
agpgart.h: do not include <stdlib.h> from exported header
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
remove the h8300 architecture
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Not much dramatic changes at this time, but we've received quite a lot
of changes for ASoC, while there are still a few fixes and quirks for
usual HD- and USB-auido. Here are some highlights.
ASoC:
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs
- Initial stages of Intel AVS driver merge
- Introduction of v4 IPC mechanism for SOF
- TDM mode support for AK4613
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
Others:
- A few regression fixes after the USB-audio endpoint management
refactoring
- More enhancements for Cirrus HD-audio codec support (still ongoing)
- Addition of generic serial MIDI driver"
* tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits)
ALSA: hda/realtek - Add new type for ALC245
ALSA: usb-audio: Configure sync endpoints before data
ALSA: ctxfi: fix typo in comment
ALSA: cs5535audio: fix typo in comment
ALSA: ctxfi: Add SB046x PCI ID
ALSA: usb-audio: Add missing ep_idx in fixed EP quirks
ALSA: usb-audio: Workaround for clock setup on TEAC devices
ALSA: lola: Bounds check loop iterator against streams array size
ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv()
ASoC: rt1308-sdw: add the default value of register 0xc320
ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic
ASoC: rt9120: Fix 3byte read, valule offset typo
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver.
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR'
ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get()
ASoC: SOF: mediatek: remove duplicate include in mt8195.c
ASoC: SOF: mediatek: Add mt8195 debug dump
ASoC: SOF: mediatek: Add mediatek common debug dump
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"Intel PT:
- Allow hardware tracing on KVM test programs. In this case, the VM
is not running an OS, but only the functions loaded into it by the
hypervisor test program, and conveniently, loaded at the same
virtual addresses.
- Improve documentation:
- Add link to perf wiki's page
- Cleanups:
- Delete now unused perf-with-kcore.sh script
- Remove unused machines__find_host()
ARM SPE (Statistical Profile Extensions):
- Add man page entry.
Vendor Events:
- Update various Intel event topics
- Update various microarch events
- Fix various cstate metrics
- Fix Alderlake metric groups
- Add sapphirerapids events
- Add JSON files for ARM Cortex A34, A35, A55, A510, A65, A73, A75,
A77, A78, A710, X1, X2 and Neoverse E1
- Update Cortex A57/A72
perf stat:
- Introduce stats for the user and system rusage times
perf c2c:
- Prep work to support ARM systems
perf annotate:
- Add --percent-limit option
perf lock:
- Add -t/--thread option for report
- Do not discard broken lock stats
perf bench:
- Add breakpoint benchmarks
perf test:
- Limit to only run executable scripts in tests
- Add basic perf record tests
- Add stat record+report test
- Add basic stat and topdown group test
- Skip several tests when the user hasn't permission to perform them
- Fix test case 81 ("perf record tests") on s390x
perf version:
- debuginfod support improvements
perf scripting python:
- Expose symbol offset and source information
perf build:
- Error for BPF skeletons without LIBBPF
- Use Python devtools for version autodetection rather than runtime
Miscellaneous:
- Add riscv64 support to 'perf jitdump'
- Various fixes/tidy ups related to cpu_map
- Fixes for handling Intel hybrid systems"
* tag 'perf-tools-for-v5.19-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (122 commits)
perf intel-pt: Add guest_code support
perf kvm report: Add guest_code support
perf script: Add guest_code support
perf tools: Add guest_code support
perf tools: Factor out thread__set_guest_comm()
perf tools: Add machine to machines back pointer
perf vendors events arm64: Update Cortex A57/A72
perf vendors events arm64: Arm Neoverse E1
perf vendors events arm64: Arm Cortex-X2
perf vendors events arm64: Arm Cortex-X1
perf vendors events arm64: Arm Cortex-A710
perf vendors events arm64: Arm Cortex-A78
perf vendors events arm64: Arm Cortex-A77
perf vendors events arm64: Arm Cortex-A75
perf vendors events arm64: Arm Cortex-A73
perf vendors events arm64: Arm Cortex-A65
perf vendors events arm64: Arm Cortex-A510
perf vendors events arm64: Arm Cortex-A55
perf vendors events arm64: Arm Cortex-A35
perf vendors events arm64: Arm Cortex-A34
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Nothing too interesting. This adds cpu controller selftests and there
are a couple code cleanup patches"
* 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: remove the superfluous judgment
cgroup: Make cgroup_debug static
kseltest/cgroup: Make test_stress.sh work if run interactively
kselftest/cgroup: fix test_stress.sh to use OUTPUT dir
cgroup: Add config file to cgroup selftest suite
cgroup: Add test_cpucg_max_nested() testcase
cgroup: Add test_cpucg_max() testcase
cgroup: Add test_cpucg_nested_weight_underprovisioned() testcase
cgroup: Adding test_cpucg_nested_weight_overprovisioned() testcase
cgroup: Add test_cpucg_weight_underprovisioned() testcase
cgroup: Add test_cpucg_weight_overprovisioned() testcase
cgroup: Add test_cpucg_stats() testcase to cgroup cpu selftests
cgroup: Add new test_cpu.c test suite in cgroup selftests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests and framework:
- introduce _NULL and _NOT_NULL macros to pointer error checks
- rework kunit_resource allocation policy to fix memory leaks when
caller doesn't specify free() function to be used when allocating
memory using kunit_add_resource() and kunit_alloc_resource() funcs.
- add ability to specify suite-level init and exit functions"
* tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
kunit: tool: Use qemu-system-i386 for i386 runs
kunit: fix executor OOM error handling logic on non-UML
kunit: tool: update riscv QEMU config with new serial dependency
kcsan: test: use new suite_{init,exit} support
kunit: tool: Add list of all valid test configs on UML
kunit: take `kunit_assert` as `const`
kunit: tool: misc cleanups
kunit: tool: minor cosmetic cleanups in kunit_parser.py
kunit: tool: make parser stop overwriting status of suites w/ no_tests
kunit: tool: remove dead parse_crash_in_log() logic
kunit: tool: print clearer error message when there's no TAP output
kunit: tool: stop using a shell to run kernel under QEMU
kunit: tool: update test counts summary line format
kunit: bail out of test filtering logic quicker if OOM
lib/Kconfig.debug: change KUnit tests to default to KUNIT_ALL_TESTS
kunit: Rework kunit_resource allocation policy
kunit: fix debugfs code to use enum kunit_status, not bool
kfence: test: use new suite_{init/exit} support, add .kunitconfig
kunit: add ability to specify suite-level init and exit functions
kunit: rename print_subtest_{start,end} for clarity (s/subtest/suite)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests:
- add mips support for kprobe args string and syntax tests
- updates to resctrl test to use kselftest framework
- fixes, cleanups, and enhancements to tests"
* tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftests/ir : Improve readability of modprobe error message
selftests/resctrl: Fix null pointer dereference on open failed
selftests/resctrl: Add missing SPDX license to Makefile
selftests/resctrl: Update README about using kselftest framework to build/run resctrl_tests
selftests/resctrl: Make resctrl_tests run using kselftest framework
selftests/resctrl: Fix resctrl_tests' return code to work with selftest framework
selftests/resctrl: Change the default limited time to 120 seconds
selftests/resctrl: Kill child process before parent process terminates if SIGTERM is received
selftests/resctrl: Print a message if the result of MBM&CMT tests is failed on Intel CPU
selftests/resctrl: Extend CPU vendor detection
selftests/x86/corrupt_xstate_header: Use provided __cpuid_count() macro
selftests/x86/amx: Use provided __cpuid_count() macro
selftests/vm/pkeys: Use provided __cpuid_count() macro
selftests: Provide local define of __cpuid_count()
selftests/damon: add damon to selftests root Makefile
selftests/binderfs: Improve message to provide more info
selftests: mqueue: drop duplicate min definition
selftests/ftrace: add mips support for kprobe args syntax tests
selftests/ftrace: add mips support for kprobe args string tests
|
|
The default "timeout" for one kselftest is 45 seconds, while some cases in
run_vmtests.sh require more time. This will cause testing timeout like:
not ok 4 selftests: vm: run_vmtests.sh # TIMEOUT 45 seconds
Therefore, add the "settings" file with timeout variable so users can set
the "timeout" value.
Link: https://lkml.kernel.org/r/20220521083825.319654-4-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The "test_hmm.sh" file used by run_vmtests.sh dose not be installed into
INSTALL_PATH. Thus run_vmtests.sh can not call it in INSTALL_PATH:
---------------------------
running ./test_hmm.sh smoke
---------------------------
./run_vmtests.sh: line 74: ./test_hmm.sh: No such file or directory
[FAIL]
-----------------------
Add "test_hmm.sh" to TEST_FILES so that it will be installed.
Link: https://lkml.kernel.org/r/20220521083825.319654-3-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
in ksm_tests
Patch series "selftests: vm: a few fixup patches".
This series contains three fixup patches for vm selftests. They are
independent. Please see the patches.
This patch (of 3):
Currently, ksm_tests operates "merge_across_nodes" with NUMA either
enabled or disabled. In a system with NUMA disabled, these operations
will fail and output a misleading report given "merge_across_nodes" does
not exist in sysfs:
----------------------------
running ./ksm_tests -M -p 10
----------------------------
f /sys/kernel/mm/ksm/merge_across_nodes
fopen: No such file or directory
Cannot save default tunables
[FAIL]
----------------------
So check numa_available() before those operations to skip them if NUMA is
disabled.
Link: https://lkml.kernel.org/r/20220521083825.319654-1-patrick.wang.shcn@gmail.com
Link: https://lkml.kernel.org/r/20220521083825.319654-2-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add newly added migration test object to .gitignore file.
Link: https://lkml.kernel.org/r/20220521094313.166505-1-usama.anjum@collabora.com
Fixes: 0c2d08728470 ("mm: add selftests for migration entries")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Spelling mistake (triple letters) in comment. Detected with the help of
Coccinelle.
Link: https://lkml.kernel.org/r/20220521111145.81697-80-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce process_mrelease syscall sanity tests which include tests
which expect to fail:
- process_mrelease with invalid pidfd and flags inputs
- process_mrelease on a live process with no pending signals
and valid process_mrelease usage which is expected to succeed. Because
process_mrelease has to be used against a process with a pending SIGKILL,
it's possible that the process exits before process_mrelease gets called.
In such cases we retry the test with a victim that allocates twice more
memory up to 1GB. This would require the victim process to spend more
time during exit and process_mrelease has a better chance of catching the
process before it exits and succeeding.
On success the test reports the amount of memory the child had to allocate
for reaping to succeed. Sample output:
$ mrelease_test
Success reaping a child with 1MB of memory allocations
On failure the test reports the failure. Sample outputs:
$ mrelease_test
All process_mrelease attempts failed!
$ mrelease_test
process_mrelease: Invalid argument
Link: https://lkml.kernel.org/r/20220518204316.13131-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If the first goto is taken, 'fd' is not opened yet (and is un-initialized).
So a direct return is safer.
Link: https://lkml.kernel.org/r/628312312eb40e0e39463a2c06415fde5295c716.1653229120.git.christophe.jaillet@wanadoo.fr
Fixes: c1a31a2f7a9c ("cgroup: fix racy check in alloc_pagecache_max_30M() helper function")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: David Vernet <void@manifault.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fixing side effect of the so-called opportunistic change in the commit.
Fixes: dc8a9febbab0 ("KVM: selftests: x86: Fix test failure on arch lbr capable platforms")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518170118.66263-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fix and feature for 5.19
- ultravisor communication device driver
- fix TEID on terminating storage key ops
|
|
KVM/riscv changes for 5.19
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.19
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
[Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated
from 4 to 6. - Paolo]
|
|
On Arch LBR capable platforms, LBR_FMT in perf capability msr is 0x3f,
so the last format test will fail. Use a true invalid format(0x30) for
the test if it's running on these platforms. Opportunistically change
the file name to reflect the tests actually carried out.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220512084046.105479-1-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add a thermal library and thermal tools to wrap the netlink
interface into event-based callbacks, improve overheat condition
handling during suspend-to-idle on Intel SoCs, add some new hardware
support, fix bugs and clean up code.
Specifics:
- Add thermal library and thermal tools to encapsulate the netlink
into event based callbacks (Daniel Lezcano, Jiapeng Chong).
- Improve overheat condition handling during suspend-to-idle in the
Intel PCH thermal driver (Zhang Rui).
- Use local ops instead of global ops in devfreq_cooling (Kant Fan).
- Clean up _OSC handling in int340x (Davidlohr Bueso).
- Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
(Hesham Almatary).
- Add new k3 j72xx bangdap driver and the corresponding bindings
(Keerthy).
- Fix missing of_node_put() in the SC iMX driver at probe time
(Miaoqian Lin).
- Fix memory leak in __thermal_cooling_device_register()
when device_register() fails by calling
thermal_cooling_device_destroy_sysfs() (Yang Yingliang).
- Add sc8180x and sc8280xp compatible string in the DT bindings and
lMH support for QCom tsens driver (Bjorn Andersson).
- Fix OTP Calibration Register values conforming to the documentation
on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).
- Fix type in kerneldoc description for __thermal_bind_params
(Corentin Labbe).
- Fix potential NULL dereference in sr_thermal_probe() on Broadcom
platform (Zheng Yongjun).
- Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
Pallikunhi).
- Fix non-negative value support by preventing the value to be clamp
to zero (Stefan Wahren).
- Add compatible string and DT bindings for MSM8960 tsens driver
(Dmitry Baryshkov).
- Add hwmon support for K3 driver (Massimiliano Minella).
- Refactor and add multiple generations support for QCom ADC driver
(Jishnu Prakash).
- Use platform_get_irq_optional() to get the interrupt on RCar driver
and document Document RZ/V2L bindings (Lad Prabhakar).
- Remove NULL check after container_of() call from the Intel HFI
thermal driver (Haowen Bai)"
* tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
thermal: intel: pch: improve the cooling delay log
thermal: intel: pch: enhance overheat handling
thermal: intel: pch: move cooling delay to suspend_noirq phase
PM: wakeup: expose pm_wakeup_pending to modules
thermal: k3_j72xx_bandgap: Add the bandgap driver support
dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe
thermal/core: Fix memory leak in __thermal_cooling_device_register()
dt-bindings: thermal: tsens: Add sc8280xp compatible
dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible
thermal/drivers/qcom/lmh: Add sc8180x compatible
thermal/drivers/rz2gl: Fix OTP Calibration Register values
dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings
thermal: thermal_of: fix typo on __thermal_bind_params
tools/thermal: remove unneeded semicolon
tools/lib/thermal: remove unneeded semicolon
thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
tools/thermal: Add thermal daemon skeleton
tools/thermal: Add a temperature capture tool
tools/thermal: Add util library
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA kernel code to upstream revision 20220331,
improve handling of PCI devices that are in D3cold during system
initialization, add support for a few features, fix bugs and clean up
code.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20220331
including the following changes:
- Add support for the Windows 11 _OSI string (Mario Limonciello)
- Add the CFMWS subtable to the CEDT table (Lawrence Hileman).
- iASL: NHLT: Treat Terminator as specific_config (Piotr
Maziarz).
- iASL: NHLT: Fix parsing undocumented bytes at the end of
Endpoint Descriptor (Piotr Maziarz).
- iASL: NHLT: Rename linux specific strucures to device_info
(Piotr Maziarz).
- Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob
Moore).
- Clean up double word in comment (Tom Rix).
- Update copyright notices to the year 2022 (Bob Moore).
- Remove some tabs and // comments - automated cleanup (Bob
Moore).
- Replace zero-length array with flexible-array member (Gustavo
A. R. Silva).
- Interpreter: Add units to time variable names (Paul Menzel).
- Add support for ARM Performance Monitoring Unit Table (Besar
Wicaksono).
- Inform users about ACPI spec violation related to sleep length
(Paul Menzel).
- iASL/MADT: Add OEM-defined subtable (Bob Moore).
- Interpreter: Fix some typo mistakes (Selvarasu Ganesan).
- Updates for revision E.d of IORT (Shameer Kolothum).
- Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).
- Improve debug messages in the ACPI device PM code (Rafael Wysocki).
- Block ASUS B1400CEAE from suspend to idle by default (Mario
Limonciello).
- Improve handling of PCI devices that are in D3cold during system
initialization (Rafael Wysocki).
- Fix BERT error region memory mapping (Lorenzo Pieralisi).
- Add support for NVIDIA 16550-compatible port subtype to the SPCR
parsing code (Jeff Brasen).
- Use static for BGRT_SHOW kobj_attribute defines (Tom Rix).
- Fix missing prototype warning for acpi_agdi_init() (Ilkka
Koskinen).
- Fix missing ERST record ID in the APEI code (Liu Xinpeng).
- Make APEI error injection to refuse to inject into the zero page
(Tony Luck).
- Correct description of INT3407 / INT3532 DPTF attributes in sysfs
(Sumeet Pawnikar).
- Add support for high frequency impedance notification to the DPTF
driver (Sumeet Pawnikar).
- Make mp_config_acpi_gsi() a void function (Li kunyu).
- Unify Package () representation for properties in the ACPI device
properties documentation (Andy Shevchenko).
- Include UUID in _DSM evaluation warning (Michael Niewöhner)"
* tag 'acpi-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (41 commits)
Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms"
ACPI: utils: include UUID in _DSM evaluation warning
ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default
x86: ACPI: Make mp_config_acpi_gsi() a void function
ACPI: DPTF: Add support for high frequency impedance notification
ACPI: AGDI: Fix missing prototype warning for acpi_agdi_init()
ACPI: bus: Avoid non-ACPI device objects in walks over children
ACPI: DPTF: Correct description of INT3407 / INT3532 attributes
ACPI: BGRT: use static for BGRT_SHOW kobj_attribute defines
ACPI, APEI, EINJ: Refuse to inject into the zero page
ACPI: PM: Always print final debug message in acpi_device_set_power()
ACPI: SPCR: Add support for NVIDIA 16550-compatible port subtype
ACPI: docs: enumeration: Unify Package () for properties (part 2)
ACPI: APEI: Fix missing ERST record id
ACPICA: Update version to 20220331
ACPICA: exsystem.c: Use ACPI_FORMAT_UINT64 for 64-bit output
ACPICA: IORT: Updates for revision E.d
ACPICA: executer/exsystem: Fix some typo mistakes
ACPICA: iASL/MADT: Add OEM-defined subtable
ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
- Tightened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An
invalid hash format causes a compilation error. Previously, they got
included to the kernel binary but were silently ignored at run-time.
- Allow root user to append new hashes to the blacklist keyring.
- Trusted keys backed with Cryptographic Acceleration and Assurance
Module (CAAM), which part of some of the new NXP's SoC's. Now there
is total three hardware backends for trusted keys: TPM, ARM TEE and
CAAM.
- A scattered set of fixes and small improvements for the TPM driver.
* tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
MAINTAINERS: add KEYS-TRUSTED-CAAM
doc: trusted-encrypted: describe new CAAM trust source
KEYS: trusted: Introduce support for NXP CAAM-based trusted keys
crypto: caam - add in-kernel interface for blob generator
crypto: caam - determine whether CAAM supports blob encap/decap
KEYS: trusted: allow use of kernel RNG for key material
KEYS: trusted: allow use of TEE as backend without TCG_TPM support
tpm: Add field upgrade mode support for Infineon TPM2 modules
tpm: Fix buffer access in tpm2_get_tpm_pt()
char: tpm: cr50_i2c: Suppress duplicated error message in .remove()
tpm: cr50: Add new device/vendor ID 0x504a6666
tpm: Remove read16/read32/write32 calls from tpm_tis_phy_ops
tpm: ibmvtpm: Correct the return value in tpm_ibmvtpm_probe()
tpm/tpm_ftpm_tee: Return true/false (not 1/0) from bool functions
certs: Explain the rationale to call panic()
certs: Allow root user to append signed hashes to the blacklist keyring
certs: Check that builtin blacklist hashes are valid
certs: Make blacklist_vet_description() more strict
certs: Factor out the blacklist hash creation
tools/certs: Add print-cert-tbs-hash.sh
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock updates from Mickaël Salaün:
- improve the path_rename LSM hook implementations for RENAME_EXCHANGE;
- fix a too-restrictive filesystem control for a rare corner case;
- set the nested sandbox limitation to 16 layers;
- add a new LANDLOCK_ACCESS_FS_REFER access right to properly handle
file reparenting (i.e. full rename and link support);
- add new tests and documentation;
- format code with clang-format to make it easier to maintain and
contribute.
* tag 'landlock-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (30 commits)
landlock: Explain how to support Landlock
landlock: Add design choices documentation for filesystem access rights
landlock: Document good practices about filesystem policies
landlock: Document LANDLOCK_ACCESS_FS_REFER and ABI versioning
samples/landlock: Add support for file reparenting
selftests/landlock: Add 11 new test suites dedicated to file reparenting
landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER
LSM: Remove double path_rename hook calls for RENAME_EXCHANGE
landlock: Move filesystem helpers and add a new one
landlock: Fix same-layer rule unions
landlock: Create find_rule() from unmask_layers()
landlock: Reduce the maximum number of layers to 16
landlock: Define access_mask_t to enforce a consistent access mask size
selftests/landlock: Test landlock_create_ruleset(2) argument check ordering
landlock: Change landlock_restrict_self(2) check ordering
landlock: Change landlock_add_rule(2) argument check ordering
selftests/landlock: Add tests for O_PATH
selftests/landlock: Fully test file rename with "remove" access
selftests/landlock: Extend access right tests to directories
selftests/landlock: Add tests for unknown access rights
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
- Rework USER_NOTIF notification ordering and kill logic (Sargun
Dhillon)
- Improved PTRACE_O_SUSPEND_SECCOMP selftest (Jann Horn)
- Gracefully handle failed unshare() in selftests (Yang Guang)
- Spelling fix (Colin Ian King)
* tag 'seccomp-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Fix spelling mistake "Coud" -> "Could"
selftests/seccomp: Add test for wait killable notifier
selftests/seccomp: Refactor get_proc_stat to split out file reading code
seccomp: Add wait_killable semantic to seccomp user notifier
selftests/seccomp: Ensure that notifications come in FIFO order
seccomp: Use FIFO semantics to order notifications
selftests/seccomp: Add SKIP for failed unshare()
selftests/seccomp: Test PTRACE_O_SUSPEND_SECCOMP without CAP_SYS_ADMIN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"Platform PMU changes:
- x86/intel:
- Add new Intel Alder Lake and Raptor Lake support
- x86/amd:
- AMD Zen4 IBS extensions support
- Add AMD PerfMonV2 support
- Add AMD Fam19h Branch Sampling support
Generic changes:
- signal: Deliver SIGTRAP on perf event asynchronously if blocked
Perf instrumentation can be driven via SIGTRAP, but this causes a
problem when SIGTRAP is blocked by a task & terminate the task.
Allow user-space to request these signals asynchronously (after
they get unblocked) & also give the information to the signal
handler when this happens:
"To give user space the ability to clearly distinguish
synchronous from asynchronous signals, introduce
siginfo_t::si_perf_flags and TRAP_PERF_FLAG_ASYNC (opted for
flags in case more binary information is required in future).
The resolution to the problem is then to (a) no longer force the
signal (avoiding the terminations), but (b) tell user space via
si_perf_flags if the signal was synchronous or not, so that such
signals can be handled differently (e.g. let user space decide
to ignore or consider the data imprecise). "
- Unify/standardize the /sys/devices/cpu/events/* output format.
- Misc fixes & cleanups"
* tag 'perf-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
perf/x86/amd/core: Fix reloading events for SVM
perf/x86/amd: Run AMD BRS code only on supported hw
perf/x86/amd: Fix AMD BRS period adjustment
perf/x86/amd: Remove unused variable 'hwc'
perf/ibs: Fix comment
perf/amd/ibs: Advertise zen4_ibs_extensions as pmu capability attribute
perf/amd/ibs: Add support for L3 miss filtering
perf/amd/ibs: Use ->is_visible callback for dynamic attributes
perf/amd/ibs: Cascade pmu init functions' return value
perf/x86/uncore: Add new Alder Lake and Raptor Lake support
perf/x86/uncore: Clean up uncore_pci_ids[]
perf/x86/cstate: Add new Alder Lake and Raptor Lake support
perf/x86/msr: Add new Alder Lake and Raptor Lake support
perf/x86: Add new Alder Lake and Raptor Lake support
perf/amd/ibs: Use interrupt regs ip for stack unwinding
perf/x86/amd/core: Add PerfMonV2 overflow handling
perf/x86/amd/core: Add PerfMonV2 counter control
perf/x86/amd/core: Detect available counters
perf/x86/amd/core: Detect PerfMonV2 support
x86/msr: Add PerfCntrGlobal* registers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Comprehensive interface overhaul:
=================================
Objtool's interface has some issues:
- Several features are done unconditionally, without any way to
turn them off. Some of them might be surprising. This makes
objtool tricky to use, and prevents porting individual features
to other arches.
- The config dependencies are too coarse-grained. Objtool
enablement is tied to CONFIG_STACK_VALIDATION, but it has several
other features independent of that.
- The objtool subcmds ("check" and "orc") are clumsy: "check" is
really a subset of "orc", so it has all the same options.
The subcmd model has never really worked for objtool, as it only
has a single purpose: "do some combination of things on an object
file".
- The '--lto' and '--vmlinux' options are nonsensical and have
surprising behavior.
Overhaul the interface:
- get rid of subcmds
- make all features individually selectable
- remove and/or clarify confusing/obsolete options
- update the documentation
- fix some bugs found along the way
- Fix x32 regression
- Fix Kbuild cleanup bugs
- Add scripts/objdump-func helper script to disassemble a single
function from an object file.
- Rewrite scripts/faddr2line to be section-aware, by basing it on
'readelf', moving it away from 'nm', which doesn't handle multiple
sections well, which can result in decoding failure.
- Rewrite & fix symbol handling - which had a number of bugs wrt.
object files that don't have global symbols - which is rare but
possible. Also fix a bunch of symbol handling bugs found along the
way.
* tag 'objtool-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
objtool: Fix objtool regression on x32 systems
objtool: Fix symbol creation
scripts/faddr2line: Fix overlapping text section failures
scripts: Create objdump-func helper script
objtool: Remove libsubcmd.a when make clean
objtool: Remove inat-tables.c when make clean
objtool: Update documentation
objtool: Remove --lto and --vmlinux in favor of --link
objtool: Add HAVE_NOINSTR_VALIDATION
objtool: Rename "VMLINUX_VALIDATION" -> "NOINSTR_VALIDATION"
objtool: Make noinstr hacks optional
objtool: Make jump label hack optional
objtool: Make static call annotation optional
objtool: Make stack validation frame-pointer-specific
objtool: Add CONFIG_OBJTOOL
objtool: Extricate sls from stack validation
objtool: Rework ibt and extricate from stack validation
objtool: Make stack validation optional
objtool: Add option to print section addresses
objtool: Don't print parentheses in function addresses
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Initial support for the ARMv9 Scalable Matrix Extension (SME).
SME takes the approach used for vectors in SVE and extends this to
provide architectural support for matrix operations. No KVM support
yet, SME is disabled in guests.
- Support for crashkernel reservations above ZONE_DMA via the
'crashkernel=X,high' command line option.
- btrfs search_ioctl() fix for live-lock with sub-page faults.
- arm64 perf updates: support for the Hisilicon "CPA" PMU for
monitoring coherent I/O traffic, support for Arm's CMN-650 and
CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup.
- Kselftest updates for SME, BTI, MTE.
- Automatic generation of the system register macros from a 'sysreg'
file describing the register bitfields.
- Update the type of the function argument holding the ESR_ELx register
value to unsigned long to match the architecture register size
(originally 32-bit but extended since ARMv8.0).
- stacktrace cleanups.
- ftrace cleanups.
- Miscellaneous updates, most notably: arm64-specific huge_ptep_get(),
avoid executable mappings in kexec/hibernate code, drop TLB flushing
from get_clear_flush() (and rename it to get_clear_contig()),
ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (145 commits)
arm64/sysreg: Generate definitions for FAR_ELx
arm64/sysreg: Generate definitions for DACR32_EL2
arm64/sysreg: Generate definitions for CSSELR_EL1
arm64/sysreg: Generate definitions for CPACR_ELx
arm64/sysreg: Generate definitions for CONTEXTIDR_ELx
arm64/sysreg: Generate definitions for CLIDR_EL1
arm64/sve: Move sve_free() into SVE code section
arm64: Kconfig.platforms: Add comments
arm64: Kconfig: Fix indentation and add comments
arm64: mm: avoid writable executable mappings in kexec/hibernate code
arm64: lds: move special code sections out of kernel exec segment
arm64/hugetlb: Implement arm64 specific huge_ptep_get()
arm64/hugetlb: Use ptep_get() to get the pte value of a huge page
arm64: kdump: Do not allocate crash low memory if not needed
arm64/sve: Generate ZCR definitions
arm64/sme: Generate defintions for SVCR
arm64/sme: Generate SMPRI_EL1 definitions
arm64/sme: Automatically generate SMPRIMAP_EL2 definitions
arm64/sme: Automatically generate SMIDR_EL1 defines
arm64/sme: Automatically generate defines for SMCR
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"This includes some small changes to kernel/stop_machine.c and arch/x86
which are deps of the new Intel IFS support.
Highlights:
- New drivers:
- Intel "In Field Scan" (IFS) support
- Winmate FM07/FM07P buttons
- Mellanox SN2201 support
- AMD PMC driver enhancements
- Lots of various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (54 commits)
platform/x86/intel/ifs: Add CPU_SUP_INTEL dependency
platform/x86: intel_cht_int33fe: Set driver data
platform/x86: intel-hid: fix _DSM function index handling
platform/x86: toshiba_acpi: use kobj_to_dev()
platform/x86: samsung-laptop: use kobj_to_dev()
platform/x86: gigabyte-wmi: Add support for Z490 AORUS ELITE AC and X570 AORUS ELITE WIFI
tools/power/x86/intel-speed-select: Fix warning for perf_cap.cpu
tools/power/x86/intel-speed-select: Display error on turbo mode disabled
Documentation: In-Field Scan
platform/x86/intel/ifs: add ABI documentation for IFS
trace: platform/x86/intel/ifs: Add trace point to track Intel IFS operations
platform/x86/intel/ifs: Add IFS sysfs interface
platform/x86/intel/ifs: Add scan test support
platform/x86/intel/ifs: Authenticate and copy to secured memory
platform/x86/intel/ifs: Check IFS Image sanity
platform/x86/intel/ifs: Read IFS firmware image
platform/x86/intel/ifs: Add stub driver for In-Field Scan
stop_machine: Add stop_core_cpuslocked() for per-core operations
x86/msr-index: Define INTEGRITY_CAPABILITIES MSR
x86/microcode/intel: Expose collect_cpu_info_early() for IFS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Borislav Petkov:
- A bunch of changes towards streamlining low level asm helpers'
calling conventions so that former can be converted to C eventually
- Simplify PUSH_AND_CLEAR_REGS so that it can be used at the system
call entry paths instead of having opencoded, slightly different
variants of it everywhere
- Misc other fixes
* tag 'x86_asm_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix register corruption in compat syscall
objtool: Fix STACK_FRAME_NON_STANDARD reloc type
linkage: Fix issue with missing symbol size
x86/entry: Remove skip_r11rcx
x86/entry: Use PUSH_AND_CLEAR_REGS for compat
x86/entry: Simplify entry_INT80_compat()
x86/mm: Simplify RESERVE_BRK()
x86/entry: Convert SWAPGS to swapgs and remove the definition of SWAPGS
x86/entry: Don't call error_entry() for XENPV
x86/entry: Move CLD to the start of the idtentry macro
x86/entry: Move PUSH_AND_CLEAR_REGS out of error_entry()
x86/entry: Switch the stack after error_entry() returns
x86/traps: Use pt_regs directly in fixup_bad_iret()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU feature updates from Borislav Petkov:
- Remove a bunch of chicken bit options to turn off CPU features which
are not really needed anymore
- Misc fixes and cleanups
* tag 'x86_cpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Add missing prototype for unpriv_ebpf_notify()
x86/pm: Fix false positive kmemleak report in msr_build_context()
x86/speculation/srbds: Do not try to turn mitigation off when not supported
x86/cpu: Remove "noclflush"
x86/cpu: Remove "noexec"
x86/cpu: Remove "nosmep"
x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"
x86/cpu: Remove "nosep"
x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-05-23
We've added 113 non-merge commits during the last 26 day(s) which contain
a total of 121 files changed, 7425 insertions(+), 1586 deletions(-).
The main changes are:
1) Speed up symbol resolution for kprobes multi-link attachments, from Jiri Olsa.
2) Add BPF dynamic pointer infrastructure e.g. to allow for dynamically sized ringbuf
reservations without extra memory copies, from Joanne Koong.
3) Big batch of libbpf improvements towards libbpf 1.0 release, from Andrii Nakryiko.
4) Add BPF link iterator to traverse links via seq_file ops, from Dmitrii Dolgov.
5) Add source IP address to BPF tunnel key infrastructure, from Kaixi Fan.
6) Refine unprivileged BPF to disable only object-creating commands, from Alan Maguire.
7) Fix JIT blinding of ld_imm64 when they point to subprogs, from Alexei Starovoitov.
8) Add BPF access to mptcp_sock structures and their meta data, from Geliang Tang.
9) Add new BPF helper for access to remote CPU's BPF map elements, from Feng Zhou.
10) Allow attaching 64-bit cookie to BPF link of fentry/fexit/fmod_ret, from Kui-Feng Lee.
11) Follow-ups to typed pointer support in BPF maps, from Kumar Kartikeya Dwivedi.
12) Add busy-poll test cases to the XSK selftest suite, from Magnus Karlsson.
13) Improvements in BPF selftest test_progs subtest output, from Mykola Lysenko.
14) Fill bpf_prog_pack allocator areas with illegal instructions, from Song Liu.
15) Add generic batch operations for BPF map-in-map cases, from Takshak Chahande.
16) Make bpf_jit_enable more user friendly when permanently on 1, from Tiezhu Yang.
17) Fix an array overflow in bpf_trampoline_get_progs(), from Yuntao Wang.
====================
Link: https://lore.kernel.org/r/20220523223805.27931-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds tests for dynptrs, which include cases that the
verifier needs to reject (for example, a bpf_ringbuf_reserve_dynptr
without a corresponding bpf_ringbuf_submit/discard_dynptr) as well
as cases that should successfully pass.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-7-joannelkoong@gmail.com
|
|
This patch adds a new helper function
void *bpf_dynptr_data(struct bpf_dynptr *ptr, u32 offset, u32 len);
which returns a pointer to the underlying data of a dynptr. *len*
must be a statically known value. The bpf program may access the returned
data slice as a normal buffer (eg can do direct reads and writes), since
the verifier associates the length with the returned pointer, and
enforces that no out of bounds accesses occur.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-6-joannelkoong@gmail.com
|
|
This patch adds two helper functions, bpf_dynptr_read and
bpf_dynptr_write:
long bpf_dynptr_read(void *dst, u32 len, struct bpf_dynptr *src, u32 offset);
long bpf_dynptr_write(struct bpf_dynptr *dst, u32 offset, void *src, u32 len);
The dynptr passed into these functions must be valid dynptrs that have
been initialized.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-5-joannelkoong@gmail.com
|
|
Currently, our only way of writing dynamically-sized data into a ring
buffer is through bpf_ringbuf_output but this incurs an extra memcpy
cost. bpf_ringbuf_reserve + bpf_ringbuf_commit avoids this extra
memcpy, but it can only safely support reservation sizes that are
statically known since the verifier cannot guarantee that the bpf
program won’t access memory outside the reserved space.
The bpf_dynptr abstraction allows for dynamically-sized ring buffer
reservations without the extra memcpy.
There are 3 new APIs:
long bpf_ringbuf_reserve_dynptr(void *ringbuf, u32 size, u64 flags, struct bpf_dynptr *ptr);
void bpf_ringbuf_submit_dynptr(struct bpf_dynptr *ptr, u64 flags);
void bpf_ringbuf_discard_dynptr(struct bpf_dynptr *ptr, u64 flags);
These closely follow the functionalities of the original ringbuf APIs.
For example, all ringbuffer dynptrs that have been reserved must be
either submitted or discarded before the program exits.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-4-joannelkoong@gmail.com
|
|
This patch adds a new api bpf_dynptr_from_mem:
long bpf_dynptr_from_mem(void *data, u32 size, u64 flags, struct bpf_dynptr *ptr);
which initializes a dynptr to point to a bpf program's local memory. For now
only local memory that is of reg type PTR_TO_MAP_VALUE is supported.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-3-joannelkoong@gmail.com
|
|
This patch adds the bulk of the verifier work for supporting dynamic
pointers (dynptrs) in bpf.
A bpf_dynptr is opaque to the bpf program. It is a 16-byte structure
defined internally as:
struct bpf_dynptr_kern {
void *data;
u32 size;
u32 offset;
} __aligned(8);
The upper 8 bits of *size* is reserved (it contains extra metadata about
read-only status and dynptr type). Consequently, a dynptr only supports
memory less than 16 MB.
There are different types of dynptrs (eg malloc, ringbuf, ...). In this
patchset, the most basic one, dynptrs to a bpf program's local memory,
is added. For now only local memory that is of reg type PTR_TO_MAP_VALUE
is supported.
In the verifier, dynptr state information will be tracked in stack
slots. When the program passes in an uninitialized dynptr
(ARG_PTR_TO_DYNPTR | MEM_UNINIT), the stack slots corresponding
to the frame pointer where the dynptr resides at are marked
STACK_DYNPTR. For helper functions that take in initialized dynptrs (eg
bpf_dynptr_read + bpf_dynptr_write which are added later in this
patchset), the verifier enforces that the dynptr has been initialized
properly by checking that their corresponding stack slots have been
marked as STACK_DYNPTR.
The 6th patch in this patchset adds test cases that the verifier should
successfully reject, such as for example attempting to use a dynptr
after doing a direct write into it inside the bpf program.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-2-joannelkoong@gmail.com
|
|
There are spelling mistakes in ASSERT messages. Fix these.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220523115604.49942-1-colin.i.king@gmail.com
|
|
Latest llvm-project upstream had a change of behavior
related to qualifiers on function return type ([1]).
This caused selftests btf_dump/btf_dump failure.
The following example shows what changed.
$ cat t.c
typedef const char * const (* const (* const fn_ptr_arr2_t[5])())(char * (*)(int));
struct t {
int a;
fn_ptr_arr2_t l;
};
int foo(struct t *arg) {
return arg->a;
}
Compiled with latest upstream llvm15,
$ clang -O2 -g -target bpf -S -emit-llvm t.c
The related generated debuginfo IR looks like:
!16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17)
!17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !32)
!18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19)
!19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64)
!20 = !DISubroutineType(types: !21)
!21 = !{!22, null}
!22 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !23, size: 64)
!23 = !DISubroutineType(types: !24)
!24 = !{!25, !28}
!25 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !26, size: 64)
!26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27)
!27 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char)
You can see two intermediate const qualifier to pointer are dropped in debuginfo IR.
With llvm14, we have following debuginfo IR:
!16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17)
!17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !34)
!18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19)
!19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64)
!20 = !DISubroutineType(types: !21)
!21 = !{!22, null}
!22 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !23)
!23 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !24, size: 64)
!24 = !DISubroutineType(types: !25)
!25 = !{!26, !30}
!26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27)
!27 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !28, size: 64)
!28 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !29)
!29 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char)
All const qualifiers are preserved.
To adapt the selftest to both old and new llvm, this patch removed
the intermediate const qualifier in const-to-ptr types, to make the
test succeed again.
[1] https://reviews.llvm.org/D125919
Reported-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220523152044.3905809-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU update from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offloading updates, mainly simplifications
- RCU-tasks updates, including some -rt fixups, handling of systems
with sparse CPU numbering, and a fix for a boot-time race-condition
failure
- Put SRCU on a memory diet in order to reduce the size of the
srcu_struct structure
- Torture-test updates fixing some bugs in tests and closing some
testing holes
- Torture-test updates for the RCU tasks flavors, most notably ensuring
that building rcutorture and friends does not change the
RCU-tasks-related Kconfig options
- Torture-test scripting updates
- Expedited grace-period updates, most notably providing
milliseconds-scale (not all that) soft real-time response from
synchronize_rcu_expedited().
This is also the first time in almost 30 years of RCU that someone
other than me has pushed for a reduction in the RCU CPU stall-warning
timeout, in this case by more than three orders of magnitude from 21
seconds to 20 milliseconds. This tighter timeout applies only to
expedited grace periods
* tag 'rcu.2022.05.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
rcu: Move expedited grace period (GP) work to RT kthread_worker
rcu: Introduce CONFIG_RCU_EXP_CPU_STALL_TIMEOUT
srcu: Drop needless initialization of sdp in srcu_gp_start()
srcu: Prevent expedited GPs and blocking readers from consuming CPU
srcu: Add contention check to call_srcu() srcu_data ->lock acquisition
srcu: Automatically determine size-transition strategy at boot
rcutorture: Make torture.sh allow for --kasan
rcutorture: Make torture.sh refscale and rcuscale specify Tasks Trace RCU
rcutorture: Make kvm.sh allow more memory for --kasan runs
torture: Save "make allmodconfig" .config file
scftorture: Remove extraneous "scf" from per_version_boot_params
rcutorture: Adjust scenarios' Kconfig options for CONFIG_PREEMPT_DYNAMIC
torture: Enable CSD-lock stall reports for scftorture
torture: Skip vmlinux check for kvm-again.sh runs
scftorture: Adjust for TASKS_RCU Kconfig option being selected
rcuscale: Allow rcuscale without RCU Tasks Rude/Trace
rcuscale: Allow rcuscale without RCU Tasks
refscale: Allow refscale without RCU Tasks Rude/Trace
refscale: Allow refscale without RCU Tasks
rcutorture: Allow specifying per-scenario stat_interval
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull LKMM update from Paul McKenney:
"This updates the klitmus7 compatibility table to indicate that
herdtools7 7.56.1 or better is required for Linux kernel v5.17 or
later"
* tag 'lkmm.2022.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model/README: Update klitmus7 compat table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc library updates from Paul McKenney:
"This adds a number of library functions and splits this library into
multiple files"
* tag 'nolibc.2022.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (61 commits)
tools/nolibc/string: Implement `strdup()` and `strndup()`
tools/nolibc/string: Implement `strnlen()`
tools/nolibc/stdlib: Implement `malloc()`, `calloc()`, `realloc()` and `free()`
tools/nolibc/types: Implement `offsetof()` and `container_of()` macro
tools/nolibc/sys: Implement `mmap()` and `munmap()`
tools/nolibc: i386: Implement syscall with 6 arguments
tools/nolibc: Remove .global _start from the entry point code
tools/nolibc: Replace `asm` with `__asm__`
tools/nolibc: x86-64: Update System V ABI document link
tools/nolibc/stdlib: only reference the external environ when inlined
tools/nolibc/string: do not use __builtin_strlen() at -O0
tools/nolibc: add the nolibc subdir to the common Makefile
tools/nolibc: add a makefile to install headers
tools/nolibc/types: add poll() and waitpid() flag definitions
tools/nolibc/sys: add syscall definition for getppid()
tools/nolibc/string: add strcmp() and strncmp()
tools/nolibc/stdio: add support for '%p' to vfprintf()
tools/nolibc/stdlib: add a simple getenv() implementation
tools/nolibc/stdio: make printf(%s) accept NULL
tools/nolibc/stdlib: implement abort()
...
|
|
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Müller <deso@posteo.net>
Link: https://lore.kernel.org/bpf/20220521111145.81697-71-Julia.Lawall@inria.fr
|
|
Merge power management tools updates for 5.19-rc1:
- Update turbostat to version 2022.04.16 including the following
changes:
* No build warnings with -Wextra (Len Brown).
* Tweak --show and --hide capability (Len Brown).
* Be more useful as non-root (Len Brown).
* Fix ICX DRAM power numbers (Len Brown).
* Fix dump for AMD cpus (Dan Merillat).
* Add Power Limit4 support (Sumeet Pawnikar).
* Print power values upto three decimal (Sumeet Pawnikar).
* Allow -e for all names (Zephaniah E. Loss-Cutler-Hull).
* Allow printing header every N iterations (Zephaniah E.
Loss-Cutler-Hull).
* Support thermal throttle count print (Chen Yu).
* pm-tools:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
|
|
Merge ACPICA material for 5.19-rc1:
- Add support for the Windows 11 _OSI string (Mario Limonciello)
- Add the CFMWS subtable to the CEDT table (Lawrence Hileman).
- iASL: NHLT: Treat Terminator as specific_config (Piotr Maziarz).
- iASL: NHLT: Fix parsing undocumented bytes at the end of Endpoint
Descriptor (Piotr Maziarz).
- iASL: NHLT: Rename linux specific strucures to device_info (Piotr
Maziarz).
- Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob Moore).
- Clean up double word in comment (Tom Rix).
- Update copyright notices to the year 2022 (Bob Moore).
- Remove some tabs and // comments - automated cleanup (Bob Moore).
- Replace zero-length array with flexible-array member (Gustavo A. R.
Silva).
- Interpreter: Add units to time variable names (Paul Menzel).
- Add support for ARM Performance Monitoring Unit Table (Besar
Wicaksono).
- Inform users about ACPI spec violation related to sleep length (Paul
Menzel).
- iASL/MADT: Add OEM-defined subtable (Bob Moore).
- Interpreter: Fix some typo mistakes (Selvarasu Ganesan).
- Updates for revision E.d of IORT (Shameer Kolothum).
- Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).
- Update version to 20220331 (Bob Moore).
* acpica: (21 commits)
Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms"
ACPICA: Update version to 20220331
ACPICA: exsystem.c: Use ACPI_FORMAT_UINT64 for 64-bit output
ACPICA: IORT: Updates for revision E.d
ACPICA: executer/exsystem: Fix some typo mistakes
ACPICA: iASL/MADT: Add OEM-defined subtable
ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms
ACPICA: executer/exsystem: Inform users about ACPI spec violation
ACPICA: Add support for ARM Performance Monitoring Unit Table.
ACPICA: executer/exsystem: Add units to time variable names
ACPICA: Headers: Replace zero-length array with flexible-array member
ACPICA: Removed some tabs and // comments
ACPICA: Update copyright notices to the year 2022
ACPICA: Clean up double word in comment
ACPICA: Add new ACPI 6.4 semantics for LoadTable() operator
ACPICA: Add new ACPI 6.4 semantics to the Load() operator
ACPICA: iASL: NHLT: Rename linux specific strucures to device_info
ACPICA: iASL: NHLT: Fix parsing undocumented bytes at the end of Endpoint Descriptor
ACPICA: iASL: NHLT: Treat Terminator as specific_config
ACPICA: Add the subtable CFMWS to the CEDT table
...
|