| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following error occurs:
clang: error: cannot specify -o when generating multiple output files
This is because clang, unlike gcc, won't accept invocations of this
form:
clang file1.c header2.h
While trying to fix this, I noticed that:
a) selftests/lib.mk already avoids the problem, and
b) The binderfs Makefile indavertently bypasses the selftests/lib.mk
build system, and quitely uses Make's implicit build rules for .c files
instead.
The Makefile attempts to set up both a dependency and a source file,
neither of which was needed, because lib.mk is able to automatically
handle both. This line:
binderfs_test: binderfs_test.c
...causes Make's implicit rules to run, which builds binderfs_test
without ever looking at lib.mk.
Fix this by simply deleting the "binderfs_test:" Makefile target and
letting lib.mk handle it instead.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: 6e29225af902 ("binderfs: port tests to test harness infrastructure")
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn") marked functions that call
exit() as __noreturn but it did not change the return type of these
functions from 'void' to 'int' like it should have (since a noreturn
function by definition cannot return an integer because it does not
return...) because there were many tests that return the result of the
ksft_exit functions, even though it has never been used due to calling
exit().
Now that all uses of 'return ksft_exit...()' have been cleaned up
properly, change the types of the ksft_exit...() functions to void to
match their __noreturn nature.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the call to ksft_exit_pass(), as __noreturn prevents the
compiler from warning that a caller of ksft_exit_pass() does not return
a value because the program will terminate upon calling these functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_...(), as __noreturn prevents the
compiler from warning that a caller of the ksft_exit functions does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the call to ksft_exit_pass(), as __noreturn prevents the
compiler from warning that a caller of ksft_exit_pass() does not return
a value because the program will terminate upon calling these functions
(which is what the comment alluded to as well).
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_skip(), as __noreturn prevents
the compiler from warning that a caller of ksft_exit_skip() does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_{pass,fail}(), as __noreturn
prevents the compiler from warning that a caller of the ksft_exit
functions does not return a value because the program will terminate
upon calling these functions.
Just removing 'return' would have resulted in
!ret ? ksft_exit_pass() : ksft_exit_fail();
so convert that into the more idiomatic
if (ret)
ksft_exit_fail();
ksft_exit_pass();
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_...(), as __noreturn prevents the
compiler from warning that a caller of the ksft_exit functions does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_pass(), as __noreturn prevents
the compiler from warning that a caller of ksft_exit_pass() does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_...(), as __noreturn prevents the
compiler from warning that a caller of the ksft_exit functions does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_{pass,fail}(), as __noreturn
prevents the compiler from warning that a caller of the ksft_exit
functions does not return a value because the program will terminate
upon calling these functions.
Just removing 'return' would have resulted in
!ret ? ksft_exit_pass() : ksft_exit_fail();
so convert that into the more idiomatic
if (ret)
ksft_exit_fail();
ksft_exit_pass();
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There is one use of bash specific syntax in the script. Change it to the
equivalent POSIX syntax. This doesn't change functionality and allows
the test to be run on shells other than bash.
Reported-by: Mike Looijmans <mike.looijmans@topic.nl>
Closes: https://lore.kernel.org/all/efae4037-c22a-40be-8ba9-7c1c12ece042@topic.nl/
Fixes: 4a679c5afca0 ("selftests: Add test to verify power supply properties")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There are a couple uses of bash specific syntax in the script. Change
them to the equivalent POSIX syntax. This doesn't change functionality
and allows non-bash test scripts to make use of these helpers.
Reported-by: Mike Looijmans <mike.looijmans@topic.nl>
Closes: https://lore.kernel.org/all/efae4037-c22a-40be-8ba9-7c1c12ece042@topic.nl/
Fixes: 2dd0b5a8fcc4 ("selftests: ktap_helpers: Add a helper to finish the test")
Fixes: 14571ab1ad21 ("kselftest: Add new test for detecting unprobed Devicetree devices")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This test outputs lots of information. Let's conform the core part of
the test to TAP and leave the information printing messages for now.
Include ktap_helpers.sh to print conformed logs. Use KSFT_* macros to
return the correct exit code for the kselftest framework and CIs to
understand the exit status.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Let the compilers (clang) know that this function would just call
exit() and would never return. It is needed to avoid false positive
static analysis errors. All similar functions calling exit()
unconditionally have been marked as __noreturn.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When logging an error from calling waitpid() on the child we print a
misleading error message saying that the error we report was returned by
the chilld. Fix this to say the error is from waitpid().
Applied after fixing merge conflict:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When the child exits during the clone3() selftest we use WEXITSTATUS() to
get the exit status from the process without first checking WIFEXITED() to
see if the result will be valid. This can lead to incorrect results, for
example if the child exits due to signal. Add a WIFEXTED() check and report
any non-standard exit as a failure, using EXIT_FAILURE as the exit status
for call_clone3() since we otherwise report 0 or negative errnos.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Shuah reported a compiler warning with an Ubuntu GCC 13 build, I've been
unable to reproduce it but hopefully this fixes the issue:
clone3_set_tid.c:136:43: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t’ {aka ‘long unsigned int’} [-Wformat=]
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In order to facilitate debugging of issues from automated runs of the ftrace
selftests turn on verbose logging by default when run from the kselftest
runner. This is primarily used by automated systems where developers may
not have direct access to the system so defaulting to providing diagnostic
information which might help debug problems seems like a good idea.
When tests pass no extra output is generated, when they fail a full log of
the test run is provided. Since this really is rather verbose when there are
a large number of test failures or output is slow (eg, with a serial
console) this could substantially increase the run time for the tests which
might present problems with timeout detection for affected systems,
hopefully we keep the tests running well enough that this is not too much
of an issue.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When -v is specified ftracetest will dump logs of test execution to the
console which if -K is also specified for KTAP output will result in
output that is not properly KTAP formatted. All that's required for KTAP
formatting is that anything we log have a '#' at the start of the line so
we can improve things by washing the output through a simple read loop.
This will help automated parsers when verbose mode is enabled.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Use ksft_exit_fail_perror() to print the value of errno and its string
form. This is the first user of the ksft_exit_fail_perror() and proves
the usefulness of this API.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a version of ksft_exit_fail_msg() which prints the errno and its
string form with ease. There is no benefit of exit message without
errno. Whenever some error occurs, instead of printing errno manually,
this function would be very helpful. In the next TAP ports or new tests,
this function will be used instead of ksft_exit_fail_msg() as it prints
errno.
Resolved merge conflict found in next between the following commits:
f7d5bcd35d42 ("selftests: kselftest: Mark functions that unconditionally call exit() as __noreturn")
f07041728422 ("selftests: add ksft_exit_fail_perror()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The comment on top of the file is used by many developers to glance over
all the available functions. Add the recently added ksft_perror() to it.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The test results reported for the clone3_set_tid tests interact poorly with
automation for running kselftest since the reported test names include TIDs
dynamically allocated at runtime. A lot of automation for running kselftest
will compare runs by looking at the test name to identify if the same test
is being run so changing names make it look like the testsuite has been
updated to include new tests. This makes the results display less clearly
and breaks cases like bisection.
Address this by providing a brief description of the tests and logging that
along with the stable parameters for the test currently logged. The TIDs
are already logged separately in existing logging except for the final test
which has a new log message added. We also tweak the formatting of the
logging of expected/actual values for clarity.
There are still issues with the logging of skipped tests (many are simply
not logged at all when skipped and all are logged with different names) but
these are less disruptive since the skips are all based on not being run as
root, a condition likely to be stable for a given test system.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Every test calls its cleanup function at the end of it's test function.
After the cleanup function pointer is added to the test framework this
can be simplified to executing the callback function at the end of the
generic test running function.
Make test cleanup functions static and call them from the end of
run_single_test() from the resctrl_test's cleanup function pointer.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Ctrl-c handler isn't aware of what test is currently running. Because of
that it executes all cleanups even if they aren't necessary. Since the
ctrl-c handler uses the sa_sigaction system no parameters can be passed
to it as function arguments.
Add a global variable to make ctrl-c handler aware of the currently run
test and only execute the correct cleanup callback.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Resctrl selftests use very similar functions to cleanup after
themselves. This creates a lot of code duplication. Also not being
hooked to the test framework means that ctrl-c handler isn't aware of
what test is currently running and executes all cleanups even though
only one is needed.
Add a function pointer to the resctrl_test struct and attach to it
cleanup functions from individual tests.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Improve the TAP messages as well.
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Add more logic code to skip the tests if particular configuration isn't
available to make sure that either we skip each test or mark it pass/fail.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There are multiple #ifdef blocks inside functions where they return just
0 if #ifdef is false. This makes number of tests counting difficult.
Move those functions inside one #ifdef block and move all of them
together. This is preparatory patch for next patch to convert this into
TAP format. So in this patch, we are just moving functions around
without any changes.
With and without this patch, the output of this patch is same.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently the tty_tstamp_update test reports a different exit message
for every path it can exit via. This can be confusing for automated systems
as the string that gets logged is interpreted as a test name so if the test
status changes they can't tell that it's the same test case that was run,
they can see that the overall status of the test program is a failure but
it's not clear that it was running the same test.
Change all the messages that are logged to be diagnostic prints and log the
name of the program as the test name.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently there's no helper which a test can use to report it's result as
a KSFT_ result code, we can report a boolean pass/fail but not a skip. This
is sometimes a useful idiom so let's add a helper ksft_test_result_report()
which translates into the relevant report types.
Due to the use of va_args in the result reporting functions this is done as
a macro rather than an inline function as one might expect, none of the
alternatives looked particularly great.
Resolved merge conflict in next betwwen the following commits:
f7d5bcd35d42 ("selftests: kselftest: Mark functions that unconditionally call exit() as __noreturn")
5d3a9274f0d1 ("kselftest: Add mechanism for reporting a KSFT_ result code")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
It could not find __vdso_getcpu and __vdso_gettimeofday when test getcpu
and gettimeofday on LoongArch.
# make headers && cd tools/testing/selftests/vDSO && make
# ./vdso_test_getcpu
Could not find __vdso_getcpu
# ./vdso_test_gettimeofday
Could not find __vdso_gettimeofday
One simple way is to add LoongArch case to define version and name, just
like commit d942f231afc0 ("selftests/vDSO: Add riscv getcpu & gettimeofday
test"), but it is not the best way.
Since each architecture has already defined names and versions in
vdso_config.h, it is proper to include vdso_config.h to get version and
name for all archs.
Link: https://lkml.kernel.org/r/20240428030530.24399-3-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/vDSO: Fix errors on LoongArch", v4.
This patch (of 2):
There exist the following errors when build vDSO selftests on LoongArch:
# make headers && cd tools/testing/selftests/vDSO && make
...
error: 'VDSO_VERSION' undeclared (first use in this function)
...
error: 'VDSO_NAMES' undeclared (first use in this function)
We can see the following code in arch/loongarch/vdso/vdso.lds.S:
VERSION
{
LINUX_5.10 {
global:
__vdso_getcpu;
__vdso_clock_getres;
__vdso_clock_gettime;
__vdso_gettimeofday;
__vdso_rt_sigreturn;
local: *;
};
}
so VDSO_VERSION should be 6 and VDSO_NAMES should be 1 for LoongArch,
add them to fix the building errors on LoongArch.
Link: https://lkml.kernel.org/r/20240428030530.24399-1-yangtiezhu@loongson.cn
Link: https://lkml.kernel.org/r/20240428030530.24399-2-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "test_xarray: couple of fixes for v6-9-rc6", v2.
Here are a couple of fixes which should be merged into the queue for
v6.9-rc6. The first one was reported by Liam, after fixing that I noticed
an issue with a test, and a fix for that is in the second patch.
This patch (of 2):
Liam reported that compiling the test_xarray on userspace was broken. I
was not even aware that was possible but you can via and you can run these
tests in userspace with:
make -C tools/testing/radix-tree
./tools/testing/radix-tree/xarray
Add the two helpers we need to fix compilation. We don't need a userspace
schedule() so just make it do nothing.
Link: https://lkml.kernel.org/r/20240423192221.301095-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20240423192221.301095-2-mcgrof@kernel.org
Fixes: a60cc288a1a2 ("test_xarray: add tests for advanced multi-index use")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reported-by: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Dave Jiang:
"Add missing RCH support for endpoint access_coordinate calculation.
A late bug was reported by Robert Richter that the Restricted CXL Host
(RCH) support was missing in the CXL endpoint access_coordinate
calculation.
The missing support causes the topology iterator to stumble over a
NULL pointer and triggers a kernel OOPS on a platform with CXL 1.1
support.
The fix bypasses RCH topology as the access_coordinate calculation is
not necessary since RCH does not support hotplug and the memory region
exported should be covered by the HMAT table already.
A unit test is also added to cxl_test to check against future
regressions on the topology iterator"
* tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.9, part #2
- Fix + test for a NULL dereference resulting from unsanitised user
input in the vgic-v2 device attribute accessors
|
|
Robert reported the following when booting a CXL host with Restricted CXL
Host (RCH) topology:
[ 39.815379] cxl_acpi ACPI0017:00: not a cxl_port device
[ 39.827123] WARNING: CPU: 46 PID: 1754 at drivers/cxl/core/port.c:592 to_cxl_port+0x56/0x70 [cxl_core]
... plus some related subsequent NULL pointer dereference:
[ 40.718708] BUG: kernel NULL pointer dereference, address: 00000000000002d8
The iterator to walk the PCIe path did not account for RCH topology.
However RCH does not support hotplug and the memory exported by the
Restricted CXL Device (RCD) should be covered by HMAT and therefore no
access_coordinate is needed. Add check to see if the endpoint device is
RCD and skip calculation.
Also add a call to cxl_endpoint_get_perf_coordinates() in cxl_test in order
to exercise the topology iterator. The dev_is_pci() check added is to help
with this test and should be harmless for normal operation.
Reported-by: Robert Richter <rrichter@amd.com>
Closes: https://lore.kernel.org/all/Ziv8GfSMSbvlBB0h@rric.localdomain/
Fixes: 592780b8391f ("cxl: Fix retrieving of access_coordinates in PCIe path")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20240426224913.1027420-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
There is a 'malloc' call, which can be unsuccessful.
This patch will add the malloc failure checking
to avoid possible null dereference and give more information
about test fail reasons.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423082102.2018886-1-chentao@kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix left shift overflow issue when the parameter idx is greater than or
equal to 8 in the calculation of perm in PIRx_ELx_PERM macro.
Fix this by modifying the encoding to use a long integer type.
Signed-off-by: Shiqi Liu <shiqiliu@hust.edu.cn>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240421063328.29710-1-shiqiliu@hust.edu.cn
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Remove unused parameter i in tpidr2.c main function.
Signed-off-by: xieming <xieming@kylinos.cn>
Link: https://lore.kernel.org/r/20240422015730.89805-1-xieming@kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
separation
- A fix to avoid loading rv64/NOMMU kernel past the start of RAM
- A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
overflow in the bitmask
- The sud_test kselftest has been fixed to properly swizzle the syscall
number into the return register, which are not the same on RISC-V
- A fix for a build warning in the perf tools on rv32
- A fix for the CBO selftests, to avoid non-constants leaking into the
inline asm
- A pair of fixes for T-Head PBMT errata probing, which has been
renamed MAE by the vendor
* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
perf riscv: Fix the warning due to the incompatible type
riscv: T-Head: Test availability bit before enabling MAE errata
riscv: thead: Rename T-Head PBMT to MAE
selftests: sud_test: return correct emulated syscall value on RISC-V
riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-26
We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 14 files changed, 168 insertions(+), 72 deletions(-).
The main changes are:
1) Fix BPF_PROBE_MEM in verifier and JIT to skip loads from vsyscall page,
from Puranjay Mohan.
2) Fix a crash in XDP with devmap broadcast redirect when the latter map
is in process of being torn down, from Toke Høiland-Jørgensen.
3) Fix arm64 and riscv64 BPF JITs to properly clear start time for BPF
program runtime stats, from Xu Kuohai.
4) Fix a sockmap KCSAN-reported data race in sk_psock_skb_ingress_enqueue,
from Jason Xing.
5) Fix BPF verifier error message in resolve_pseudo_ldimm64,
from Anton Protopopov.
6) Fix missing DEBUG_INFO_BTF_MODULES Kconfig menu item,
from Andrii Nakryiko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test PROBE_MEM of VSYSCALL_ADDR on x86-64
bpf, x86: Fix PROBE_MEM runtime load check
bpf: verifier: prevent userspace memory access
xdp: use flags field to disambiguate broadcast redirect
arm32, bpf: Reimplement sign-extension mov instruction
riscv, bpf: Fix incorrect runtime stats
bpf, arm64: Fix incorrect runtime stats
bpf: Fix a verifier verbose message
bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue
MAINTAINERS: bpf: Add Lehui and Puranjay as riscv64 reviewers
MAINTAINERS: Update email address for Puranjay Mohan
bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition
====================
Link: https://lore.kernel.org/r/20240426224248.26197-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 8 are cc:stable and the remaining 3 (nice ratio!) address
post-6.8 issues or aren't considered suitable for backporting.
All except one of these are for MM. I see no particular theme - it's
singletons all over"
* tag 'mm-hotfixes-stable-2024-04-26-13-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
selftests: mm: protection_keys: save/restore nr_hugepages value from launch script
stackdepot: respect __GFP_NOLOCKDEP allocation flag
hugetlb: check for anon_vma prior to folio allocation
mm: zswap: fix shrinker NULL crash with cgroup_disable=memory
mm: turn folio_test_hugetlb into a PageType
mm: support page_mapcount() on page_has_type() pages
mm: create FOLIO_FLAG_FALSE and FOLIO_TYPE_OPS macros
mm/hugetlb: fix missing hugetlb_lock for resv uncharge
selftests: mm: fix unused and uninitialized variable warning
selftests/harness: remove use of LINE_MAX
|
|
There is request from the end user to print this field to better
query what type of update capability is supported on this platform.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 0de65288d75f ("RISC-V: selftests: cbo: Ensure asm operands
match constraints") attempted to ensure MK_CBO() would always
provide to a compile-time constant when given a constant, but
cpu_to_le32() isn't necessarily going to do that. Switch to manually
shifting the bytes, when needed, to finally get this right.
Reported-by: Woodrow Shen <woodrow.shen@sifive.com>
Closes: https://lore.kernel.org/all/CABquHATcBTUwfLpd9sPObBgNobqQKEAZ2yxk+TWSpyO5xvpXpg@mail.gmail.com/
Fixes: a29e2a48afe3 ("RISC-V: selftests: Add CBO tests")
Fixes: 0de65288d75f ("RISC-V: selftests: cbo: Ensure asm operands match constraints")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240322134728.151255-2-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In the 32-bit platform, the second argument of getline is expectd to be
'size_t *'(aka 'unsigned int *'), but line_sz is of type
'unsigned long *'. Therefore, declare line_sz as size_t.
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240305120501.1785084-3-ben717@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The vsyscall is a legacy API for fast execution of system calls. It maps
a page at address VSYSCALL_ADDR into the userspace program. This address
is in the top 10MB of the address space:
ffffffffff600000 - ffffffffff600fff | 4 kB | legacy vsyscall ABI
The last commit fixes the x86-64 BPF JIT to skip accessing addresses in
this memory region. Add this address to bpf_testmod_return_ptr() so we
can make sure that it is fixed.
After this change and without the previous commit, subprogs_extable
selftest will crash the kernel.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20240424100210.11982-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
