| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Add support for AMD on 'perf mem' and 'perf c2c', the kernel
enablement patches went via tip.
Example:
$ sudo perf mem record -- -c 10000
^C[ perf record: Woken up 227 times to write data ]
[ perf record: Captured and wrote 58.760 MB perf.data (836978 samples) ]
$ sudo perf mem report -F mem,sample,snoop
Samples: 836K of event 'ibs_op//', Event count (approx.): 8418762
Memory access Samples Snoop
N/A 700620 N/A
L1 hit 126675 N/A
L2 hit 424 N/A
L3 hit 664 HitM
L3 hit 10 N/A
Local RAM hit 2 N/A
Remote RAM (1 hop) hit 8558 N/A
Remote Cache (1 hop) hit 3 N/A
Remote Cache (1 hop) hit 2 HitM
Remote Cache (2 hops) hit 10 HitM
Remote Cache (2 hops) hit 6 N/A
Uncached hit 4 N/A
$
- "perf lock" improvements:
- Add -E/--entries option to limit the number of entries to
display, say to ask for just the top 5 contended locks.
- Add -q/--quiet option to suppress header and debug messages.
- Add a 'perf test' kernel lock contention entry to test 'perf
lock'.
- "perf lock contention" improvements:
- Ask BPF's bpf_get_stackid() to skip some callchain entries.
The ones closer to the tooling are bpf related and not that
interesting, the ones calling the locking function are the ones
we're interested in, example of a full, unskipped callstack:
- Allow changing the callstack depth and number of entries to skip.
1 10.74 us 10.74 us 10.74 us spinlock __bpf_trace_contention_begin+0xb
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffbb8b8e75 bpf_trace_run2+0x35
0xffffffffbb7eab9b __bpf_trace_contention_begin+0xb
0xffffffffbb7ebe75 queued_spin_lock_slowpath+0x1f5
0xffffffffbc1c26ff _raw_spin_lock+0x1f
0xffffffffbb841015 tick_do_update_jiffies64+0x25
0xffffffffbb8409ee tick_irq_enter+0x9e
- Show full callstack in verbose mode (-v option), sometimes this
is desirable instead of showing just one callstack entry.
- Allow multiple time ranges in 'perf record --delay' to help in
reducing the amount of data collected from hardware tracing (Intel
PT, etc) when there is a rough idea of periods of time where events
of interest take time.
- Add Intel PT to record only decoder debug messages when error
happens.
- Improve layout of Intel PT man page.
- Add new branch types: alignment, data and inst faults and arch
specific ones, such as fiq, debug_halt, debug_exit, debug_inst and
debug_data on arm64.
Kernel enablement went thru the tip tree.
- Fix 'perf probe' error log check in 'perf test' when no debuginfo is
available.
- Fix 'perf stat' aggregation mode logic, it should be looking at the
CPU not at the core number.
- Fix flags parsing in 'perf trace' filters.
- Introduce compact encoding of CPU range encoding on perf.data, to
avoid having a bitmap with all the CPUs.
- Improvements to the 'perf stat' metrics, including adding
"core_wide", and computing "smt" from the CPU topology.
- Add support to the new PERF_FORMAT_LOST perf_event_attr.read_format,
that allows tooling to ask for the precise number of lost samples for
a given event.
- Add 'addr' sort key to see just the address of sampled instructions:
$ perf record -o- true | perf report -i- -s addr
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
# Samples: 12 of event 'cycles:u'
# Event count (approx.): 252512
#
# Overhead Address
# ........ ..................
42.96% 0x7f96f08443d7
29.55% 0x7f96f0859b50
14.76% 0x7f96f0852e02
8.30% 0x7f96f0855028
4.43% 0xffffffff8de01087
perf annotate: Toggle full address <-> offset display
- Add 'f' hotkey to the 'perf annotate' TUI interface when in
'disassembler output' mode ('o' hotkey) to toggle showing full
virtual address or just the offset.
- Cache DSO build-ids when synthesizing PERF_RECORD_MMAP records for
pre-existing threads, at the start of a 'perf record' session,
speeding up that record startup phase.
- Add a command line option to specify build ids in 'perf inject'.
- Update JSON event files for the Intel alderlake, broadwell,
broadwellde, broadwellx, cascadelakex, haswell, haswellx, icelake,
icelakex, ivybridge, ivytown, jaketown, sandybridge, sapphirerapids,
skylake, skylakex, and tigerlake processors.
- Update vendor JSON event files for the ARM Neoverse V1 and E1
platforms.
- Add a 'perf test' entry for 'perf mem' where a struct has false
sharing and this gets detected in the 'perf mem' output, tested with
Intel, AMD and ARM64 systems.
- Add a 'perf test' entry to test the resolution of java symbols, where
an output like this is expected:
8.18% jshell jitted-50116-29.so [.] Interpreter
0.75% Thread-1 jitted-83602-1670.so [.] jdk.internal.jimage.BasicImageReader.getString(int)
- Add tests for the ARM64 CoreSight hardware tracing feature, with
specially crafted pureloop, memcpy, thread loop and unroll tread that
then gets traced and the output compared with expected output.
Documentation explaining it is also included.
- Add per thread Intel PT 'perf test' entry to check that
PERF_RECORD_TEXT_POKE events are recorded per CPU, resulting in a
mixture of per thread and per CPU events and mmaps, verify that this
gets all recorded correctly.
- Introduce pthread mutex wrappers to allow for building with clang's
-Wthread-safety, i.e. using the "guarded_by" "pt_guarded_by"
"lockable", "exclusive_lock_function", "exclusive_trylock_function",
"exclusive_locks_required", and "no_thread_safety_analysis" compiler
function attributes.
- Fix empty version number when building outside of a git repo.
- Improve feature detection display when multiple versions of a feature
are present, such as for binutils libbfd, that has a mix of possible
ways to detect according to the Linux distribution.
Previously in some cases we had:
Auto-detecting system features
<SNIP>
... libbfd: [ on ]
... libbfd-liberty: [ on ]
... libbfd-liberty-z: [ on ]
<SNIP>
Now for this case we show just the main feature:
Auto-detecting system features
<SNIP>
... libbfd: [ on ]
<SNIP>
- Remove some unused structs, variables, macros, function prototypes
and includes from various places.
* tag 'perf-tools-for-v6.1-1-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (169 commits)
perf script: Add missing fields in usage hint
perf mem: Print "LFB/MAB" for PERF_MEM_LVLNUM_LFB
perf mem/c2c: Avoid printing empty lines for unsupported events
perf mem/c2c: Add load store event mappings for AMD
perf mem/c2c: Set PERF_SAMPLE_WEIGHT for LOAD_STORE events
perf mem: Add support for printing PERF_MEM_LVLNUM_{CXL|IO}
perf amd ibs: Sync arch/x86/include/asm/amd-ibs.h header with the kernel
tools headers UAPI: Sync include/uapi/linux/perf_event.h header with the kernel
perf stat: Fix cpu check to use id.cpu.cpu in aggr_printout()
perf test coresight: Add relevant documentation about ARM64 CoreSight testing
perf test: Add git ignore for tmp and output files of ARM CoreSight tests
perf test coresight: Add unroll thread test shell script
perf test coresight: Add unroll thread test tool
perf test coresight: Add thread loop test shell scripts
perf test coresight: Add thread loop test tool
perf test coresight: Add memcpy thread test shell script
perf test coresight: Add memcpy thread test tool
perf test: Add git ignore for perf data generated by the ARM CoreSight tests
perf test: Add arm64 asm pureloop test shell script
perf test: Add asm pureloop test tool
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the turbostat utility, extend the macros used for
defining device power management callbacks and add a diagnostic
message to the generic power domains code.
Specifics:
- Add an error message to be printed when a power domain marked as
"always on" is not actually on during initialization (Johan
Hovold).
- Extend macros used for defining power management callbacks to allow
conditional exporting of noirq and late/early suspend/resume PM
callbacks (Paul Cercueil).
- Update the turbostat utility:
- Add support for two new platforms (Zhang Rui).
- Adjust energy unit for Sapphire Rapids (Zhang Rui).
- Do not dump TRL if turbo is not supported (Artem Bityutskiy)"
* tag 'pm-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/power turbostat: version 2022.10.04
tools/power turbostat: Use standard Energy Unit for SPR Dram RAPL domain
tools/power turbostat: Do not dump TRL if turbo is not supported
tools/power turbostat: Add support for MeteorLake platforms
tools/power turbostat: Add support for RPL-S
PM: Improve EXPORT_*_DEV_PM_OPS macros
PM: domains: log failures to register always-on domains
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Just a few bug fixes this time"
* tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle
security/keys: Remove inconsistent __user annotation
char: move from strlcpy with unused retval to strscpy
|
|
Pull bitmap updates from Yury Norov:
- Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld)
- cleanup nr_cpu_ids vs nr_cpumask_bits mess (me)
This series cleans that mess and adds new config FORCE_NR_CPUS that
allows to optimize cpumask subsystem if the number of CPUs is known
at compile-time.
- optimize find_bit() functions (me)
Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT()
macros.
- add find_nth_bit() (me)
Adds find_nth_bit(), which is ~70 times faster than bitcounting with
for_each() loop:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
Also adds bitmap_weight_and() to let people replace this pattern:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
with a single bitmap_weight_and() call.
- repair cpumask_check() (me)
After switching cpumask to use nr_cpu_ids, cpumask_check() started
generating many false-positive warnings. This series fixes it.
- Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin
Schneider)
Extends the API with one more function and applies it in sched/core.
* tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits)
sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()
lib/test_cpumask: Add for_each_cpu_and(not) tests
cpumask: Introduce for_each_cpu_andnot()
lib/find_bit: Introduce find_next_andnot_bit()
cpumask: fix checking valid cpu range
lib/bitmap: add tests for for_each() loops
lib/find: optimize for_each() macros
lib/bitmap: introduce for_each_set_bit_wrap() macro
lib/find_bit: add find_next{,_and}_bit_wrap
cpumask: switch for_each_cpu{,_not} to use for_each_bit()
net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}
cpumask: add cpumask_nth_{,and,andnot}
lib/bitmap: remove bitmap_ord_to_pos
lib/bitmap: add tests for find_nth_bit()
lib: add find_nth{,_and,_andnot}_bit()
lib/bitmap: add bitmap_weight_and()
lib/bitmap: don't call __bitmap_weight() in kernel code
tools: sync find_bit() implementation
lib/find_bit: optimize find_next_bit() functions
lib/find_bit: create find_first_zero_bit_le()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"Major changes:
- Changed location of tracing repo from personal git repo to:
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace.git
- Added Masami Hiramatsu as co-maintainer
- Updated MAINTAINERS file to separate out FTRACE as it is more than
just TRACING.
Minor changes:
- Added Mark Rutland as FTRACE reviewer
- Updated user_events to make it on its way to remove the BROKEN tag.
The changes should now be acceptable but will run it through a
cycle and hopefully we can remove the BROKEN tag next release.
- Added filtering to eprobes
- Added a delta time to the benchmark trace event
- Have the histogram and filter callbacks called via a switch
statement instead of indirect functions. This speeds it up to avoid
retpolines.
- Add a way to wake up ring buffer waiters waiting for the ring
buffer to fill up to its watermark.
- New ioctl() on the trace_pipe_raw file to wake up ring buffer
waiters.
- Wake up waiters when the ring buffer is disabled. A reader may
block when the ring buffer is disabled, but if it was blocked when
the ring buffer is disabled it should then wake up.
Fixes:
- Allow splice to read partially read ring buffer pages. This fixes
splice never moving forward.
- Fix inverted compare that made the "shortest" ring buffer wait
queue actually the longest.
- Fix a race in the ring buffer between resetting a page when a
writer goes to another page, and the reader.
- Fix ftrace accounting bug when function hooks are added at boot up
before the weak functions are set to "disabled".
- Fix bug that freed a user allocated snapshot buffer when enabling a
tracer.
- Fix possible recursive locks in osnoise tracer
- Fix recursive locking direct functions
- Other minor clean ups and fixes"
* tag 'trace-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (44 commits)
ftrace: Create separate entry in MAINTAINERS for function hooks
tracing: Update MAINTAINERS to reflect new tracing git repo
tracing: Do not free snapshot if tracer is on cmdline
ftrace: Still disable enabled records marked as disabled
tracing/user_events: Move pages/locks into groups to prepare for namespaces
tracing: Add Masami Hiramatsu as co-maintainer
tracing: Remove unused variable 'dups'
MAINTAINERS: add myself as a tracing reviewer
ring-buffer: Fix race between reset page and reading page
tracing/user_events: Update ABI documentation to align to bits vs bytes
tracing/user_events: Use bits vs bytes for enabled status page data
tracing/user_events: Use refcount instead of atomic for ref tracking
tracing/user_events: Ensure user provided strings are safely formatted
tracing/user_events: Use WRITE instead of READ for io vector import
tracing/user_events: Use NULL for strstr checks
tracing: Fix spelling mistake "preapre" -> "prepare"
tracing: Wake up waiters when tracing is disabled
tracing: Add ioctl() to force ring buffer waiters to wake up
tracing: Wake up ring buffer waiters on closing of the file
ring-buffer: Add ring_buffer_wake_waiters()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Fix race between fork and livepatch transition revert
- Add sysfs entry that shows "patched" state for each object (module)
that can be livepatched by the given livepatch
- Some clean up
* tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: add sysfs test
livepatch: add sysfs entry "patched" for each klp_object
selftests/livepatch: normalize sysctl error message
livepatch: Add a missing newline character in klp_module_coming()
livepatch: fix race between fork and KLP transition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset now support isolated cpus.partition type, which will enable
dynamic CPU isolation
- pids.peak added to remember the max number of pids used
- holes in cgroup namespace plugged
- internal cleanups
* tag 'cgroup-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (25 commits)
cgroup: use strscpy() is more robust and safer
iocost_monitor: reorder BlkgIterator
cgroup: simplify code in cgroup_apply_control
cgroup: Make cgroup_get_from_id() prettier
cgroup/cpuset: remove unreachable code
cgroup: Remove CFTYPE_PRESSURE
cgroup: Improve cftype add/rm error handling
kselftest/cgroup: Add cpuset v2 partition root state test
cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst
cgroup/cpuset: Make partition invalid if cpumask change violates exclusivity rule
cgroup/cpuset: Relocate a code block in validate_change()
cgroup/cpuset: Show invalid partition reason string
cgroup/cpuset: Add a new isolated cpus.partition type
cgroup/cpuset: Relax constraints to partition & cpus changes
cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective
cgroup/cpuset: Miscellaneous cleanups & add helper functions
cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset
cgroup: add pids.peak interface for pids controller
cgroup: Remove data-race around cgrp_dfl_visible
cgroup: Fix build failure when CONFIG_SHRINKER_DEBUG
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Remove the "ANNOTATE_NOENDBR on ENDBR" warning: it's not really
useful and only found a non-bug false positive so far.
- Properly decode LOOP/LOOPE/LOOPNE, which were missing from the x86
decoder. Because these instructions are rather ineffective, they
never showed up in compiler output, but they are simple enough to
support, so add them for completeness.
- A bit more cross-arch preparatory work.
* tag 'objtool-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool,x86: Teach decode about LOOP* instructions
objtool: Remove "ANNOTATE_NOENDBR on ENDBR" warning
objtool: Use arch_jump_destination() in read_intra_function_calls()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Disable preemption in rwsem_write_trylock()'s attempt to take the
rwsem, to avoid RT tasks hogging the CPU, which managed to preempt
this function after the owner has been cleared but before a new owner
is set. Also add debug checks to enforce this.
- Add __lockfunc to more slow path functions and add __sched to
semaphore functions.
- Mark spinlock APIs noinline when the respective CONFIG_INLINE_SPIN_*
toggles are disabled, to reduce LTO text size.
- Print more debug information when lockdep gets confused in
look_up_lock_class().
- Improve header file abuse checks.
- Misc cleanups
* tag 'locking-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Print more debug information - report name and key when look_up_lock_class() got confused
locking: Add __sched to semaphore functions
locking/rwsem: Disable preemption while trying for rwsem lock
locking: Detect includes rwlock.h outside of spinlock.h
locking: Add __lockfunc to slow path functions
locking/spinlocks: Mark spinlocks noinline when inline spinlocks are disabled
selftests: futex: Fix 'the the' typo in comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Remove our now never-true definitions for pgd_huge() and p4d_leaf().
- Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit.
- Add support for syscall wrappers.
- Add support for KFENCE on 64-bit.
- Update 64-bit HV KVM to use the new guest state entry/exit accounting
API.
- Support execute-only memory when using the Radix MMU (P9 or later).
- Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests.
- Updates to our linker script to move more data into read-only
sections.
- Allow the VDSO to be randomised on 32-bit.
- Many other small features and fixes.
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas,
Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin
Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent
Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan
Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali
Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool,
Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, and Zheng
Yongjun.
* tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
KVM: PPC: Book3S HV: Fix stack frame regs marker
powerpc: Don't add __powerpc_ prefix to syscall entry points
powerpc/64s/interrupt: Fix stack frame regs marker
powerpc/64: Fix msr_check_and_set/clear MSR[EE] race
powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN
powerpc/pseries: Add firmware details to the hardware description
powerpc/powernv: Add opal details to the hardware description
powerpc: Add device-tree model to the hardware description
powerpc/64: Add logical PVR to the hardware description
powerpc: Add PVR & CPU name to hardware description
powerpc: Add hardware description string
powerpc/configs: Enable PPC_UV in powernv_defconfig
powerpc/configs: Update config files for removed/renamed symbols
powerpc/mm: Fix UBSAN warning reported on hugetlb
powerpc/mm: Always update max/min_low_pfn in mem_topology_setup()
powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range
powerpc: Drops STABS_DEBUG from linker scripts
powerpc/64s: Remove lost/old comment
powerpc/64s: Remove old STAB comment
powerpc: remove orphan systbl_chk.sh
...
|
|
Pull kvm updates from Paolo Bonzini:
"The first batch of KVM patches, mostly covering x86.
ARM:
- Account stage2 page table allocations in memory stats
x86:
- Account EPT/NPT arm64 page table allocations in memory stats
- Tracepoint cleanups/fixes for nested VM-Enter and emulated MSR
accesses
- Drop eVMCS controls filtering for KVM on Hyper-V, all known
versions of Hyper-V now support eVMCS fields associated with
features that are enumerated to the guest
- Use KVM's sanitized VMCS config as the basis for the values of
nested VMX capabilities MSRs
- A myriad event/exception fixes and cleanups. Most notably, pending
exceptions morph into VM-Exits earlier, as soon as the exception is
queued, instead of waiting until the next vmentry. This fixed a
longstanding issue where the exceptions would incorrecly become
double-faults instead of triggering a vmexit; the common case of
page-fault vmexits had a special workaround, but now it's fixed for
good
- A handful of fixes for memory leaks in error paths
- Cleanups for VMREAD trampoline and VMX's VM-Exit assembly flow
- Never write to memory from non-sleepable kvm_vcpu_check_block()
- Selftests refinements and cleanups
- Misc typo cleanups
Generic:
- remove KVM_REQ_UNHALT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (94 commits)
KVM: remove KVM_REQ_UNHALT
KVM: mips, x86: do not rely on KVM_REQ_UNHALT
KVM: x86: never write to memory from kvm_vcpu_check_block()
KVM: x86: Don't snapshot pending INIT/SIPI prior to checking nested events
KVM: nVMX: Make event request on VMXOFF iff INIT/SIPI is pending
KVM: nVMX: Make an event request if INIT or SIPI is pending on VM-Enter
KVM: SVM: Make an event request if INIT or SIPI is pending when GIF is set
KVM: x86: lapic does not have to process INIT if it is blocked
KVM: x86: Rename kvm_apic_has_events() to make it INIT/SIPI specific
KVM: x86: Rename and expose helper to detect if INIT/SIPI are allowed
KVM: nVMX: Make an event request when pending an MTF nested VM-Exit
KVM: x86: make vendor code check for all nested events
mailmap: Update Oliver's email address
KVM: x86: Allow force_emulation_prefix to be written without a reload
KVM: selftests: Add an x86-only test to verify nested exception queueing
KVM: selftests: Use uapi header to get VMX and SVM exit reasons/codes
KVM: x86: Rename inject_pending_events() to kvm_check_and_inject_events()
KVM: VMX: Update MTF and ICEBP comments to document KVM's subtle behavior
KVM: x86: Treat pending TRIPLE_FAULT requests as pending exceptions
KVM: x86: Morph pending exceptions to pending VM-Exits at queue time
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
|
|
Pull io_uring updates from Jens Axboe:
- Add supported for more directly managed task_work running.
This is beneficial for real world applications that end up issuing
lots of system calls as part of handling work. Normal task_work will
always execute as we transition in and out of the kernel, even for
"unrelated" system calls. It's more efficient to defer the handling
of io_uring's deferred work until the application wants it to be run,
generally in batches.
As part of ongoing work to write an io_uring network backend for
Thrift, this has been shown to greatly improve performance. (Dylan)
- Add IOPOLL support for passthrough (Kanchan)
- Improvements and fixes to the send zero-copy support (Pavel)
- Partial IO handling fixes (Pavel)
- CQE ordering fixes around CQ ring overflow (Pavel)
- Support sendto() for non-zc as well (Pavel)
- Support sendmsg for zerocopy (Pavel)
- Networking iov_iter fix (Stefan)
- Misc fixes and cleanups (Pavel, me)
* tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux: (56 commits)
io_uring/net: fix notif cqe reordering
io_uring/net: don't update msg_name if not provided
io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL
io_uring/rw: defer fsnotify calls to task context
io_uring/net: fix fast_iov assignment in io_setup_async_msg()
io_uring/net: fix non-zc send with address
io_uring/net: don't skip notifs for failed requests
io_uring/rw: don't lose short results on io_setup_async_rw()
io_uring/rw: fix unexpected link breakage
io_uring/net: fix cleanup double free free_iov init
io_uring: fix CQE reordering
io_uring/net: fix UAF in io_sendrecv_fail()
selftest/net: adjust io_uring sendzc notif handling
io_uring: ensure local task_work marks task as running
io_uring/net: zerocopy sendmsg
io_uring/net: combine fail handlers
io_uring/net: rename io_sendzc()
io_uring/net: support non-zerocopy sendto
io_uring/net: refactor io_setup_async_addr
io_uring/net: don't lose partial send_zc on fail
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several documentation fixes, UML related cleanups, and a feature to
enable/disable KUnit tests
This includes the change to rename all_test_uml.config, and use it for
'--alltests'. Note: if anyone was using all_tests_uml.config, this
change breaks them.
This change simplifies the usage and eliminates the need to type:
--kunitconfig=tools/testing/kunit/configs/all_tests_uml.config
A simple workaround to create a symlink to the new name can solve the
problem for anyone using all_tests_uml.config.
all_tests_uml.config should work across ~all architectures"
* tag 'linux-kselftest-kunit-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: Kunit: Use full path to .kunitconfig
kunit: tool: rename all_test_uml.config, use it for --alltests
kunit: tool: remove UML specific options from all_tests_uml.config
lib: stackinit: update reference to kunit-tool
lib: overflow: update reference to kunit-tool
Documentation: KUnit: update links in the index page
Documentation: KUnit: add intro to the getting-started page
Documentation: KUnit: Reword start guide for selecting tests
Documentation: KUnit: add note about mrproper in start.rst
Documentation: KUnit: avoid repeating "kunit.py run" in start.rst
Documentation: KUnit: remove duplicated docs for kunit_tool
Documentation: Kunit: Add ref for other kinds of tests
Documentation: KUnit: Fix non-uml anchor
Documentation: Kunit: Fix inconsistent titles
Documentation: kunit: fix trivial typo
kunit: no longer call module_info(test, "Y") for kunit modules
kunit: add kunit.enable to enable/disable KUnit test
kunit: tool: make --raw_output=kunit (aka --raw_output) preserve leading spaces
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Fixes and new tests:
- Add an amd-pstate-ut test module, used by kselftest to unit test
amd-pstate functionality
- Fixes and cleanups to to cpu-hotplug to delete the fault injection
test code
- Improvements to vm test to use top_srcdir for builds"
* tag 'linux-kselftest-next-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
docs:kselftest: fix kselftest_module.h path of example module
cpufreq: amd-pstate: Add explanation for X86_AMD_PSTATE_UT
selftests/cpu-hotplug: Add log info when test success
selftests/cpu-hotplug: Reserve one cpu online at least
selftests/cpu-hotplug: Delete fault injection related code
selftests/cpu-hotplug: Use return instead of exit
selftests/cpu-hotplug: Correct log info
cpufreq: amd-pstate: modify type in argument 2 for filp_open
Documentation: amd-pstate: Add unit test introduction
selftests: amd-pstate: Add test trigger for amd-pstate driver
cpufreq: amd-pstate: Add test module for amd-pstate driver
cpufreq: amd-pstate: Expose struct amd_cpudata
selftests/vm: use top_srcdir instead of recomputing relative paths
|
|
A few fields are missing in the usage message printed when an unknown
field option is passed. Add them to the list.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-9-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A hw component to track outstanding L1 Data Cache misses is called LFB
(Line Fill Buffer) on Intel and Arm. However similar component exists on
other arch with different names, for ex, it's called MAB (Miss Address
Buffer) on AMD. Use 'LFB/MAB' instead of just 'LFB'.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-8-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'perf mem' and 'perf c2c' tools can be used with 3 different events:
load, store and combined load-store. Some architectures might support
only partial set of events in which case, perf prints an empty line for
unsupported events. Avoid that.
Ex, AMD Zen cpus supports only combined load-store event and does not
support individual load and store event.
Before patch:
$ perf mem record -e list
mem-ldst : available
$
After patch:
$ perf mem record -e list
mem-ldst : available
$
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-7-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'perf mem' and 'perf c2c' tools are wrappers around 'perf record'
with mem load/ store events. IBS tagged load/store sample provides most
of the information needed for these tools. Wire in the "ibs_op//" event
as mem-ldst event for AMD.
There are some limitations though: Only load/store micro-ops provide
mem/c2c information. Whereas, IBS does not have a way to choose a
particular type of micro-op to tag. This results in many non-LS
micro-ops being tagged which appear as N/A in the perf report. IBS,
being an uncore pmu from kernel point of view[1], does not support per
process monitoring. Thus, perf mem/c2c on AMD are currently supported in
per-cpu mode only.
Example:
$ sudo perf mem record -- -c 10000
^C[ perf record: Woken up 227 times to write data ]
[ perf record: Captured and wrote 58.760 MB perf.data (836978 samples) ]
$ sudo perf mem report -F mem,sample,snoop
Samples: 836K of event 'ibs_op//', Event count (approx.): 8418762
Memory access Samples Snoop
N/A 700620 N/A
L1 hit 126675 N/A
L2 hit 424 N/A
L3 hit 664 HitM
L3 hit 10 N/A
Local RAM hit 2 N/A
Remote RAM (1 hop) hit 8558 N/A
Remote Cache (1 hop) hit 3 N/A
Remote Cache (1 hop) hit 2 HitM
Remote Cache (2 hops) hit 10 HitM
Remote Cache (2 hops) hit 6 N/A
Uncached hit 4 N/A
$
[1]: https://lore.kernel.org/lkml/20220829113347.295-1-ravi.bangoria@amd.com
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-6-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently perf sets PERF_SAMPLE_WEIGHT flag only for mem load events.
Set it for combined load-store event as well which will enable recording
of load latency by default on arch that does not support independent
mem load event.
Also document missing -W in perf-record man page.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-5-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add support for printing these new fields in perf mem report.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-4-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Although new details added into this header is currently used by kernel
only, tools copy needs to be in sync with kernel file to avoid
tools/perf/check-headers.sh warnings.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-3-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Two new fields for mem_lvl_num has been introduced: PERF_MEM_LVLNUM_IO
and PERF_MEM_LVLNUM_CXL which are required to support perf mem/c2c on
AMD platform.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20221006153946.7816-2-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE
vector granule register added to the user regs together with SVE perf
extensions documentation.
- SVE updates: add HWCAP for SVE EBF16, update the SVE ABI
documentation to match the actual kernel behaviour (zeroing the
registers on syscall rather than "zeroed or preserved" previously).
- More conversions to automatic system registers generation.
- vDSO: use self-synchronising virtual counter access in gettimeofday()
if the architecture supports it.
- arm64 stacktrace cleanups and improvements.
- arm64 atomics improvements: always inline assembly, remove LL/SC
trampolines.
- Improve the reporting of EL1 exceptions: rework BTI and FPAC
exception handling, better EL1 undefs reporting.
- Cortex-A510 erratum 2658417: remove BF16 support due to incorrect
result.
- arm64 defconfig updates: build CoreSight as a module, enable options
necessary for docker, memory hotplug/hotremove, enable all PMUs
provided by Arm.
- arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME
extensions).
- arm64 ftraces updates/fixes: fix module PLTs with mcount, remove
unused function.
- kselftest updates for arm64: simple HWCAP validation, FP stress test
improvements, validation of ZA regs in signal handlers, include
larger SVE and SME vector lengths in signal tests, various cleanups.
- arm64 alternatives (code patching) improvements to robustness and
consistency: replace cpucap static branches with equivalent
alternatives, associate callback alternatives with a cpucap.
- Miscellaneous updates: optimise kprobe performance of patching
single-step slots, simplify uaccess_mask_ptr(), move MTE registers
initialisation to C, support huge vmalloc() mappings, run softirqs on
the per-CPU IRQ stack, compat (arm32) misalignment fixups for
multiword accesses.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (126 commits)
arm64: alternatives: Use vdso/bits.h instead of linux/bits.h
arm64/kprobe: Optimize the performance of patching single-step slot
arm64: defconfig: Add Coresight as module
kselftest/arm64: Handle EINTR while reading data from children
kselftest/arm64: Flag fp-stress as exiting when we begin finishing up
kselftest/arm64: Don't repeat termination handler for fp-stress
ARM64: reloc_test: add __init/__exit annotations to module init/exit funcs
arm64/mm: fold check for KFENCE into can_set_direct_map()
arm64: ftrace: fix module PLTs with mcount
arm64: module: Remove unused plt_entry_is_initialized()
arm64: module: Make plt_equals_entry() static
arm64: fix the build with binutils 2.27
kselftest/arm64: Don't enable v8.5 for MTE selftest builds
arm64: uaccess: simplify uaccess_mask_ptr()
arm64: asm/perf_regs.h: Avoid C++-style comment in UAPI header
kselftest/arm64: Fix typo in hwcap check
arm64: mte: move register initialization to C
arm64: mm: handle ARM64_KERNEL_USES_PMD_MAPS in vmemmap_populate()
arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()
arm64/sve: Add Perf extensions documentation
...
|
|
'perf stat' has options to aggregate the counts in different modes like
per socket, per core etc. The function "aggr_printout" in
util/stat-display.c which is used to print the aggregates, has a check
for cpu in case of AGGR_NONE.
This check was originally using condition : "if (id.cpu.cpu > -1)". But
this got changed after commit df936cadfb58 ("perf stat: Add JSON output
option"), which added option to output json format for different
aggregation modes. After this commit, the check in "aggr_printout" is
using "if (id.core > -1)".
The old code was using "id.cpu.cpu > -1" while the new code is using
"id.core > -1". But since the value printed is id.cpu.cpu, fix this
check to use cpu and not core.
Suggested-by: Ian Rogers <irogers@google.com>
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20221006114225.66303-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add/improve documentation helping people get started with CoreSight and
perf as well as describe the testing and how it works.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20220909152803.2317006-14-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Ignore other output files of the new CoreSight tests so they don't
fill git status with noise we don't need or want.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-13-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This adds scripts to drive the unroll thread tests to compare perf
output against a minimum bar of content/quality.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-12-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add test tool to be driven by further test scripts. This is a simple C
based test that is for arm64 with some inline ASM to manually unroll a
lot of code to have a very long sequence of commands.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-11-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a script to drive the thread loop test that gathers data so
it passes a minimum bar (in this case do we get any perf context data
for every thread).
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-10-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add test tool to be driven by further test scripts. This is a simple C
based loop with threads test to drive from scripts that can output TIDs
for tracking/checking.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-9-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a script to drive the threaded memcpy test that gathers data so it
passes a minimum bar for amount and quality of content that we extract
from the kernel's perf support.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-8-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add test tool to be driven by further test scripts. This is a simple C
based memcpy with threads test to drive from scripts.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-7-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Ignore perf output data files generated by perf tests for cleaner git
status.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-6-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a script to drive the asm pureloop test for arm64/CoreSight that
gathers data so it passes a minimum bar for amount and quality of
content that we extract from the kernel's perf support.
Committer notes:
Add the install of tests/shell/coresight/*.sh to
tools/perf/Makefile.perf as we're starting to populate that dir.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-5-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add test tool to be driven by further test scripts. This tool is pure
arm64 ASM with no libc usage to ensure it is the same exact binary/code
every time so it can also be re-used for many uses. It just loops for a
given fixed number of loops.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-4-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This adds the initial build infrastructure (makefiles maintainers
information) for adding follow-on tests for CoreSight.
Committer notes:
Remove the installation of tests/shell/coresight/*.sh, as there are no
files there yet and thus, at this point, make install fails.
Use $(QUIET_CLEAN) to avoid having extraneous output in the 'make clean'
output.
Also use @$(MAKE) in tools/perf/tests/shell/coresight/Makefile as $(Q)
is not turning into @ when V=1 isn't used, i.e. in the default case it
is not being quiet.
The >/dev/null in the all for tools/perf/tests/shell/coresight/Makefile
is to avoid this:
make[4]: Nothing to be done for 'all'.
make[4]: Nothing to be done for 'all'.
make[4]: Nothing to be done for 'all'.
DESCEND plugins
GEN /tmp/build/perf/python/perf.so
make[4]: Nothing to be done for 'all'.
INSTALL trace_plugins
On !arm64 where nothing is done on the main target for
tools/perf/tests/shell/coresight/*/Makefile.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20220909152803.2317006-3-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This adds a library of shell "code" to be shared and used by future
tests that target quality testing for Arm CoreSight support in perf
and the Linux kernel.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20220909152803.2317006-2-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The test is designed with a data structure with 64-byte alignment, it
has two fields "data1" and "data2", and other fields are reserved.
Using the "perf mem" command, we can record and report memory samples
for a self-contained workload with 1 second duration. If no samples are
obtained for the data structure "buf1", it reports failure; and by
checking the offset in structure "buf1", if the memory samples aren't
for the "data1" and "data2" fields, it means wrong data symbol parsing
and returns failure.
Committer testing:
[root@quaco ~]# grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
[root@quaco ~]#
[root@quaco ~]# perf test -v "data symbol"
104: Test data symbol :
--- start ---
test child forked, pid 192318
Compiling test program...
Recording workload...
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.389 MB /tmp/__perf_test.perf.data.LIuQl (5570 samples) ]
Cleaning up files...
test child finished with 0
---- end ----
Test data symbol: Ok
[root@quaco ~]#
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20221006101039.47870-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When synthesizing MMAP2 with build-id, it'd read the same file repeatedly as
it has no idea if it's done already. Maintain a dsos to check that and skip
the file access if possible.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220920222822.2171056-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The aggr_cpu_id has a thread value but it's actually an index to the
thread_map. To reduce possible confusion, rename it to thread_idx.
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220930202110.845199-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now it always uses the global rt_stat. Let's get rid of the field from
the saved_value. When the both evsels are NULL, it'd return 0 so remove
the block in the saved_value_cmp.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220930202110.845199-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now it's using the global rt_stat, no need to use per-thread stats. Let
get rid of them.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220930202110.845199-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When AGGR_THREAD is active, it aggregates the values for each thread.
Previously it used cpu map index which is invalid for AGGR_THREAD so
it had to use separate runtime stats with index 0.
But it can just use the rt_stat with thread_map_index. Rename the
first_shadow_map_idx() and make it return the thread index.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220930202110.845199-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The cpu_map_idx fields is just to differentiate values from other
entries. It doesn't need to be strictly cpu map index. Actually we can
pass thread map index or aggr map index. So rename the fields first.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220930202110.845199-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
evsel__reset_stat_priv() is called more than once if user gave -r option
for multiple runs. But it doesn't need to re-initialize the id.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220930202110.845199-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It uses only one member, no need to have it as an array.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220930202110.845199-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For system-wide evsels, the thread map should be dummy - i.e. it has a
single entry of -1. But the code guarantees such a thread map, so no
need to handle it specially.
No functional change intended.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221003204647.1481128-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a help to create a system-wide sched_switch event. One merit is
that it sets the system-wide bit before adding it to evlist so that
the libperf can handle the cpu and thread maps correctly.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221003204647.1481128-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
