summaryrefslogtreecommitdiff
path: root/virt/kvm
AgeCommit message (Collapse)AuthorFilesLines
2015-07-10KVM: count number of assigned devicesPaolo Bonzini1-0/+5
If there are no assigned devices, the guest PAT are not providing any useful information and can be overridden to writeback; VMX always does this because it has the "IPAT" bit in its extended page table entries, but SVM does not have anything similar. Hook into VFIO and legacy device assignment so that they provide this information to KVM. Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-03sched, preempt_notifier: separate notifier registration from static_key inc/decPeter Zijlstra1-0/+3
Commit 1cde2930e154 ("sched/preempt: Add static_key() to preempt_notifiers") had two problems. First, the preempt-notifier API needs to sleep with the addition of the static_key, we do however need to hold off preemption while modifying the preempt notifier list, otherwise a preemption could observe an inconsistent list state. KVM correctly registers and unregisters preempt notifiers with preemption disabled, so the sleep caused dmesg splats. Second, KVM registers and unregisters preemption notifiers very often (in vcpu_load/vcpu_put). With a single uniprocessor guest the static key would move between 0 and 1 continuously, hitting the slow path on every userspace exit. To fix this, wrap the static_key inc/dec in a new API, and call it from KVM. Fixes: 1cde2930e154 ("sched/preempt: Add static_key() to preempt_notifiers") Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com> Reported-by: Takashi Iwai <tiwai@suse.de> Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-24Merge tag 'arm64-upstream' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Mostly refactoring/clean-up: - CPU ops and PSCI (Power State Coordination Interface) refactoring following the merging of the arm64 ACPI support, together with handling of Trusted (secure) OS instances - Using fixmap for permanent FDT mapping, removing the initial dtb placement requirements (within 512MB from the start of the kernel image). This required moving the FDT self reservation out of the memreserve processing - Idmap (1:1 mapping used for MMU on/off) handling clean-up - Removing flush_cache_all() - not safe on ARM unless the MMU is off. Last stages of CPU power down/up are handled by firmware already - "Alternatives" (run-time code patching) refactoring and support for immediate branch patching, GICv3 CPU interface access - User faults handling clean-up And some fixes: - Fix for VDSO building with broken ELF toolchains - Fix another case of init_mm.pgd usage for user mappings (during ASID roll-over broadcasting) - Fix for FPSIMD reloading after CPU hotplug - Fix for missing syscall trace exit - Workaround for .inst asm bug - Compat fix for switching the user tls tpidr_el0 register" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (42 commits) arm64: use private ratelimit state along with show_unhandled_signals arm64: show unhandled SP/PC alignment faults arm64: vdso: work-around broken ELF toolchains in Makefile arm64: kernel: rename __cpu_suspend to keep it aligned with arm arm64: compat: print compat_sp instead of sp arm64: mm: Fix freeing of the wrong memmap entries with !SPARSEMEM_VMEMMAP arm64: entry: fix context tracking for el0_sp_pc arm64: defconfig: enable memtest arm64: mm: remove reference to tlb.S from comment block arm64: Do not attempt to use init_mm in reset_context() arm64: KVM: Switch vgic save/restore to alternative_insn arm64: alternative: Introduce feature for GICv3 CPU interface arm64: psci: fix !CONFIG_HOTPLUG_CPU build warning arm64: fix bug for reloading FPSIMD state after CPU hotplug. arm64: kernel thread don't need to save fpsimd context. arm64: fix missing syscall trace exit arm64: alternative: Work around .inst assembler bugs arm64: alternative: Merge alternative-asm.h into alternative.h arm64: alternative: Allow immediate branch as alternative instruction arm64: Rework alternate sequence for ARM erratum 845719 ...
2015-06-19KVM: fix checkpatch.pl errors in kvm/coalesced_mmio.hKevin Mulvey1-2/+2
Tabs rather than spaces Signed-off-by: Kevin Mulvey <kmulvey@linux.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: fix checkpatch.pl errors in kvm/async_pf.hKevin Mulvey1-2/+2
fix brace spacing Signed-off-by: Kevin Mulvey <kmulvey@linux.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19kvm: irqchip: Break up high order allocations of kvm_irq_routing_tableJoerg Roedel1-8/+33
The allocation size of the kvm_irq_routing_table depends on the number of irq routing entries because they are all allocated with one kzalloc call. When the irq routing table gets bigger this requires high order allocations which fail from time to time: qemu-kvm: page allocation failure: order:4, mode:0xd0 This patch fixes this issue by breaking up the allocation of the table and its entries into individual kzalloc calls. These could all be satisfied with order-0 allocations, which are less likely to fail. The downside of this change is the lower performance, because of more calls to kzalloc. But given how often kvm_set_irq_routing is called in the lifetime of a guest, it doesn't really matter much. Signed-off-by: Joerg Roedel <jroedel@suse.de> [Avoid sparse warning through rcu_access_pointer. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19Merge tag 'kvm-arm-for-4.2' of ↵Paolo Bonzini2-12/+51
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM changes for v4.2: - Proper guest time accounting - FP access fix for 32bit - The usual pile of GIC fixes - PSCI fixes - Random cleanups
2015-06-18KVM: arm/arm64: vgic: Remove useless arm-gic.h #includeMarc Zyngier1-2/+0
Back in the days, vgic.c used to have an intimate knowledge of the actual GICv2. These days, this has been abstracted away into hardware-specific backends. Remove the now useless arm-gic.h #include directive, making it clear that GICv2 specific code doesn't belong here. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-17KVM: arm/arm64: vgic: Avoid injecting reserved IRQ numbersMarc Zyngier1-4/+1
Commit fd1d0ddf2ae9 (KVM: arm/arm64: check IRQ number on userland injection) rightly limited the range of interrupts userspace can inject in a guest, but failed to consider the (unlikely) case where a guest is configured with 1024 interrupts. In this case, interrupts ranging from 1020 to 1023 are unuseable, as they have a special meaning for the GIC CPU interface. Make sure that these number cannot be used as an IRQ. Also delete a redundant (and similarily buggy) check in kvm_set_irq. Reported-by: Peter Maydell <peter.maydell@linaro.org> Cc: Andre Przywara <andre.przywara@arm.com> Cc: <stable@vger.kernel.org> # 4.1, 4.0, 3.19, 3.18 Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-17KVM: arm: vgic: Drop useless Group0 warningMarc Zyngier1-2/+0
If a GICv3-enabled guest tries to configure Group0, we print a warning on the console (because we don't support Group0 interrupts). This is fairly pointless, and would allow a guest to spam the console. Let's just drop the warning. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-12arm64: KVM: Switch vgic save/restore to alternative_insnMarc Zyngier1-3/+0
So far, we configured the world-switch by having a small array of pointers to the save and restore functions, depending on the GIC used on the platform. Loading these values each time is a bit silly (they never change), and it makes sense to rely on the instruction patching instead. This leads to a nice cleanup of the code. Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-06-09KVM: arm64: add active register handling to GICv3 emulation as wellAndre Przywara1-4/+50
Commit 47a98b15ba7c ("arm/arm64: KVM: support for un-queuing active IRQs") introduced handling of the GICD_I[SC]ACTIVER registers, but only for the GICv2 emulation. For the sake of completeness and as this is a pre-requisite for save/restore of the GICv3 distributor state, we should also emulate their handling in the distributor and redistributor frames of an emulated GICv3. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-05KVM: implement multiple address spacesPaolo Bonzini1-27/+43
Only two ioctls have to be modified; the address space id is placed in the higher 16 bits of their slot id argument. As of this patch, no architecture defines more than one address space; x86 will be the first. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05KVM: add vcpu-specific functions to read/write/translate GFNsPaolo Bonzini1-13/+154
We need to hide SMRAM from guests not running in SMM. Therefore, all uses of kvm_read_guest* and kvm_write_guest* must be changed to use different address spaces, depending on whether the VCPU is in system management mode. We need to introduce a new family of functions for this purpose. For now, the VCPU-based functions have the same behavior as the existing per-VM ones, they just accept a different type for the first argument. Later however they will be changed to use one of many "struct kvm_memslots" stored in struct kvm, through an architecture hook. VM-based functions will unconditionally use the first memslots pointer. Whenever possible, this patch introduces slot-based functions with an __ prefix, with two wrappers for generic and vcpu-based actions. The exceptions are kvm_read_guest and kvm_write_guest, which are copied into the new functions kvm_vcpu_read_guest and kvm_vcpu_write_guest. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-28KVM: remove unused argument from mark_page_dirty_in_slotPaolo Bonzini1-7/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-28KVM: remove __gfn_to_pfnPaolo Bonzini1-24/+15
Most of the function that wrap it can be rewritten without it, except for gfn_to_pfn_prot. Just inline it into gfn_to_pfn_prot, and rewrite the other function on top of gfn_to_pfn_memslot*. Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-28KVM: pass kvm_memory_slot to gfn_to_page_many_atomicPaolo Bonzini1-3/+3
The memory slot is already available from gfn_to_memslot_dirty_bitmap. Isn't it a shame to look it up again? Plus, it makes gfn_to_page_many_atomic agnostic of multiple VCPU address spaces. Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-28KVM: add "new" argument to kvm_arch_commit_memory_regionPaolo Bonzini1-1/+1
This lets the function access the new memory slot without going through kvm_memslots and id_to_memslot. It will simplify the code when more than one address space will be supported. Unfortunately, the "const"ness of the new argument must be casted away in two places. Fixing KVM to accept const struct kvm_memory_slot pointers would require modifications in pretty much all architectures, and is left for later. Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-26KVM: add memslots argument to kvm_arch_memslots_updatedPaolo Bonzini1-1/+1
Prepare for the case of multiple address spaces. Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-26KVM: const-ify uses of struct kvm_userspace_memory_regionPaolo Bonzini1-11/+11
Architecture-specific helpers are not supposed to muck with struct kvm_userspace_memory_region contents. Add const to enforce this. In order to eliminate the only write in __kvm_set_memory_region, the cleaning of deleted slots is pulled up from update_memslots to __kvm_set_memory_region. Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-26KVM: use kvm_memslots whenever possiblePaolo Bonzini1-6/+10
kvm_memslots provides lockdep checking. Use it consistently instead of explicit dereferencing of kvm->memslots. Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-26KVM: introduce kvm_alloc/free_memslotsPaolo Bonzini1-49/+55
kvm_alloc_memslots is extracted out of previously scattered code that was in kvm_init_memslots_id and kvm_create_vm. kvm_free_memslot and kvm_free_memslots are new names of kvm_free_physmem and kvm_free_physmem_slot, but they also take an explicit pointer to struct kvm_memslots. This will simplify the transition to multiple address spaces, each represented by one pointer to struct kvm_memslots. Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-19KVM: export __gfn_to_pfn_memslot, drop gfn_to_pfn_asyncPaolo Bonzini1-18/+8
gfn_to_pfn_async is used in just one place, and because of x86-specific treatment that place will need to look at the memory slot. Hence inline it into try_async_pf and export __gfn_to_pfn_memslot. The patch also switches the subsequent call to gfn_to_pfn_prot to use __gfn_to_pfn_memslot. This is a small optimization. Finally, remove the now-unused async argument of __gfn_to_pfn. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-08KVM: remove pointless cpu hotplug messagesHeiko Carstens1-6/+0
On cpu hotplug only KVM emits an unconditional message that its notifier has been called. It certainly can be assumed that calling cpu hotplug notifiers work, therefore there is no added value if KVM prints a message. If an error happens on cpu online KVM will still emit a warning. So let's remove this superfluous message. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-08KVM: reuse memslot in kvm_write_guest_pageRadim Krčmář1-2/+4
Caching memslot value and using mark_page_dirty_in_slot() avoids another O(log N) search when dirtying the page. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1428695247-27603-1-git-send-email-rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-22Merge tag 'kvm-arm-for-4.1-take2' of ↵Paolo Bonzini1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/ARM changes for v4.1, take #2: Rather small this time: - a fix for a nasty bug with virtual IRQ injection - a fix for irqfd
2015-04-22KVM: arm/arm64: check IRQ number on userland injectionAndre Przywara1-0/+3
When userland injects a SPI via the KVM_IRQ_LINE ioctl we currently only check it against a fixed limit, which historically is set to 127. With the new dynamic IRQ allocation the effective limit may actually be smaller (64). So when now a malicious or buggy userland injects a SPI in that range, we spill over on our VGIC bitmaps and bytemaps memory. I could trigger a host kernel NULL pointer dereference with current mainline by injecting some bogus IRQ number from a hacked kvmtool: ----------------- .... DEBUG: kvm_vgic_inject_irq(kvm, cpu=0, irq=114, level=1) DEBUG: vgic_update_irq_pending(kvm, cpu=0, irq=114, level=1) DEBUG: IRQ #114 still in the game, writing to bytemap now... Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffffc07652e000 [00000000] *pgd=00000000f658b003, *pud=00000000f658b003, *pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1053 Comm: lkvm-msi-irqinj Not tainted 4.0.0-rc7+ #3027 Hardware name: FVP Base (DT) task: ffffffc0774e9680 ti: ffffffc0765a8000 task.ti: ffffffc0765a8000 PC is at kvm_vgic_inject_irq+0x234/0x310 LR is at kvm_vgic_inject_irq+0x30c/0x310 pc : [<ffffffc0000ae0a8>] lr : [<ffffffc0000ae180>] pstate: 80000145 ..... So this patch fixes this by checking the SPI number against the actual limit. Also we remove the former legacy hard limit of 127 in the ioctl code. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> CC: <stable@vger.kernel.org> # 4.0, 3.19, 3.18 [maz: wrap KVM_ARM_IRQ_GIC_MAX with #ifndef __KERNEL__, as suggested by Christopher Covington] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-04-22KVM: arm: irqfd: fix value returned by kvm_irq_map_gsiEric Auger1-1/+1
irqfd/arm curently does not support routing. kvm_irq_map_gsi is supposed to return all the routing entries associated with the provided gsi and return the number of those entries. We should return 0 at this point. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-04-21KVM: PPC: Book3S HV: Create debugfs file for each guest's HPTPaul Mackerras1-0/+1
This creates a debugfs directory for each HV guest (assuming debugfs is enabled in the kernel config), and within that directory, a file by which the contents of the guest's HPT (hashed page table) can be read. The directory is named vmnnnn, where nnnn is the PID of the process that created the guest. The file is named "htab". This is intended to help in debugging problems in the host's management of guest memory. The contents of the file consist of a series of lines like this: 3f48 4000d032bf003505 0000000bd7ff1196 00000003b5c71196 The first field is the index of the entry in the HPT, the second and third are the HPT entry, so the third entry contains the real page number that is mapped by the entry if the entry's valid bit is set. The fourth field is the guest's view of the second doubleword of the entry, so it contains the guest physical address. (The format of the second through fourth fields are described in the Power ISA and also in arch/powerpc/include/asm/mmu-hash64.h.) Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-04-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds10-453/+661
Pull KVM updates from Paolo Bonzini: "First batch of KVM changes for 4.1 The most interesting bit here is irqfd/ioeventfd support for ARM and ARM64. Summary: ARM/ARM64: fixes for live migration, irqfd and ioeventfd support (enabling vhost, too), page aging s390: interrupt handling rework, allowing to inject all local interrupts via new ioctl and to get/set the full local irq state for migration and introspection. New ioctls to access memory by virtual address, and to get/set the guest storage keys. SIMD support. MIPS: FPU and MIPS SIMD Architecture (MSA) support. Includes some patches from Ralf Baechle's MIPS tree. x86: bugfixes (notably for pvclock, the others are small) and cleanups. Another small latency improvement for the TSC deadline timer" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits) KVM: use slowpath for cross page cached accesses kvm: mmu: lazy collapse small sptes into large sptes KVM: x86: Clear CR2 on VCPU reset KVM: x86: DR0-DR3 are not clear on reset KVM: x86: BSP in MSR_IA32_APICBASE is writable KVM: x86: simplify kvm_apic_map KVM: x86: avoid logical_map when it is invalid KVM: x86: fix mixed APIC mode broadcast KVM: x86: use MDA for interrupt matching kvm/ppc/mpic: drop unused IRQ_testbit KVM: nVMX: remove unnecessary double caching of MAXPHYADDR KVM: nVMX: checks for address bits beyond MAXPHYADDR on VM-entry KVM: x86: cache maxphyaddr CPUID leaf in struct kvm_vcpu KVM: vmx: pass error code with internal error #2 x86: vdso: fix pvclock races with task migration KVM: remove kvm_read_hva and kvm_read_hva_atomic KVM: x86: optimize delivery of TSC deadline timer interrupt KVM: x86: extract blocking logic from __vcpu_run kvm: x86: fix x86 eflags fixed bit KVM: s390: migrate vcpu interrupt state ...
2015-04-10KVM: use slowpath for cross page cached accessesRadim Krčmář1-2/+2
kvm_write_guest_cached() does not mark all written pages as dirty and code comments in kvm_gfn_to_hva_cache_init() talk about NULL memslot with cross page accesses. Fix all the easy way. The check is '<= 1' to have the same result for 'len = 0' cache anywhere in the page. (nr_pages_needed is 0 on page boundary.) Fixes: 8f964525a121 ("KVM: Allow cross page reads and writes from cached translations.") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <20150408121648.GA3519@potion.brq.redhat.com> Reviewed-by: Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: remove kvm_read_hva and kvm_read_hva_atomicPaolo Bonzini1-12/+2
The corresponding write functions just use __copy_to_user. Do the same on the read side. This reverts what's left of commit 86ab8cffb498 (KVM: introduce gfn_to_hva_read/kvm_read_hva/kvm_read_hva_atomic, 2012-08-21) Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1427976500-28533-1-git-send-email-pbonzini@redhat.com>
2015-04-07Merge tag 'kvm-s390-next-20150331' of ↵Paolo Bonzini1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD Features and fixes for 4.1 (kvm/next) 1. Assorted changes 1.1 allow more feature bits for the guest 1.2 Store breaking event address on program interrupts 2. Interrupt handling rework 2.1 Fix copy_to_user while holding a spinlock (cc stable) 2.2 Rework floating interrupts to follow the priorities 2.3 Allow to inject all local interrupts via new ioctl 2.4 allow to get/set the full local irq state, e.g. for migration and introspection
2015-04-07Merge tag 'kvm-arm-for-4.1' of ↵Paolo Bonzini9-389/+609
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into 'kvm-next' KVM/ARM changes for v4.1: - fixes for live migration - irqfd support - kvm-io-bus & vgic rework to enable ioeventfd - page ageing for stage-2 translation - various cleanups
2015-04-07Merge tag 'kvm-arm-fixes-4.0-rc5' of ↵Paolo Bonzini3-2/+36
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into 'kvm-next' Fixes for KVM/ARM for 4.0-rc5. Fixes page refcounting issues in our Stage-2 page table management code, fixes a missing unlock in a gicv3 error path, and fixes a race that can cause lost interrupts if signals are pending just prior to entering the guest.
2015-03-31KVM: s390: add ioctl to inject local interruptsJens Freimann1-1/+1
We have introduced struct kvm_s390_irq a while ago which allows to inject all kinds of interrupts as defined in the Principles of Operation. Add ioctl to inject interrupts with the extended struct kvm_s390_irq Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-30KVM: arm/arm64: rework MMIO abort handling to use KVM MMIO busAndre Przywara4-144/+18
Currently we have struct kvm_exit_mmio for encapsulating MMIO abort data to be passed on from syndrome decoding all the way down to the VGIC register handlers. Now as we switch the MMIO handling to be routed through the KVM MMIO bus, it does not make sense anymore to use that structure already from the beginning. So we keep the data in local variables until we put them into the kvm_io_bus framework. Then we fill kvm_exit_mmio in the VGIC only, making it a VGIC private structure. On that way we replace the data buffer in that structure with a pointer pointing to a single location in a local variable, so we get rid of some copying on the way. With all of the virtual GIC emulation code now being registered with the kvm_io_bus, we can remove all of the old MMIO handling code and its dispatching functionality. I didn't bother to rename kvm_exit_mmio (to vgic_mmio or something), because that touches a lot of code lines without any good reason. This is based on an original patch by Nikolay. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-30KVM: arm/arm64: prepare GICv3 emulation to use kvm_io_bus MMIO handlingAndre Przywara1-1/+38
Using the framework provided by the recent vgic.c changes, we register a kvm_io_bus device on mapping the virtual GICv3 resources. The distributor mapping is pretty straight forward, but the redistributors need some more love, since they need to be tagged with the respective redistributor (read: VCPU) they are connected with. We use the kvm_io_bus framework to register one devices per VCPU. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-30KVM: arm/arm64: merge GICv3 RD_base and SGI_base register framesAndre Przywara1-91/+83
Currently we handle the redistributor registers in two separate MMIO regions, one for the overall behaviour and SPIs and one for the SGIs/PPIs. That latter forces the creation of _two_ KVM I/O bus devices for each redistributor. Since the spec mandates those two pages to be contigious, we could as well merge them and save the churn with the second KVM I/O bus device. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-27KVM: arm/arm64: prepare GICv2 emulation to be handled by kvm_io_busAndre Przywara1-6/+16
Using the framework provided by the recent vgic.c changes we register a kvm_io_bus device when initializing the virtual GICv2. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-27KVM: arm/arm64: implement kvm_io_bus MMIO handling for the VGICAndre Przywara2-0/+136
Currently we use a lot of VGIC specific code to do the MMIO dispatching. Use the previous reworks to add kvm_io_bus style MMIO handlers. Those are not yet called by the MMIO abort handler, also the actual VGIC emulator function do not make use of it yet, but will be enabled with the following patches. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-27KVM: arm/arm64: simplify vgic_find_range() and callersAndre Przywara3-17/+10
The vgic_find_range() function in vgic.c takes a struct kvm_exit_mmio argument, but actually only used the length field in there. Since we need to get rid of that structure in that part of the code anyway, let's rework the function (and it's callers) to pass the length argument to the function directly. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-27KVM: arm/arm64: rename struct kvm_mmio_range to vgic_io_rangeAndre Przywara4-22/+22
The name "kvm_mmio_range" is a bit bold, given that it only covers the VGIC's MMIO ranges. To avoid confusion with kvm_io_range, rename it to vgic_io_range. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-27KVM: move iodev.h from virt/kvm/ to include/kvmAndre Przywara4-80/+3
iodev.h contains definitions for the kvm_io_bus framework. This is needed both by the generic KVM code in virt/kvm as well as by architecture specific code under arch/. Putting the header file in virt/kvm and using local includes in the architecture part seems at least dodgy to me, so let's move the file into include/kvm, so that a more natural "#include <kvm/iodev.h>" can be used by all of the code. This also solves a problem later when using struct kvm_io_device in arm_vgic.h. Fixing up the FSF address in the GPL header and a wrong include path on the way. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-27KVM: Redesign kvm_io_bus_ API to pass VCPU structure to the callbacks.Nikolay Nikolaev4-28/+36
This is needed in e.g. ARM vGIC emulation, where the MMIO handling depends on the VCPU that does the access. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-24kvm: avoid page allocation failure in kvm_set_memory_region()Igor Mammedov1-7/+7
KVM guest can fail to startup with following trace on host: qemu-system-x86: page allocation failure: order:4, mode:0x40d0 Call Trace: dump_stack+0x47/0x67 warn_alloc_failed+0xee/0x150 __alloc_pages_direct_compact+0x14a/0x150 __alloc_pages_nodemask+0x776/0xb80 alloc_kmem_pages+0x3a/0x110 kmalloc_order+0x13/0x50 kmemdup+0x1b/0x40 __kvm_set_memory_region+0x24a/0x9f0 [kvm] kvm_set_ioapic+0x130/0x130 [kvm] kvm_set_memory_region+0x21/0x40 [kvm] kvm_vm_ioctl+0x43f/0x750 [kvm] Failure happens when attempting to allocate pages for 'struct kvm_memslots', however it doesn't have to be present in physically contiguous (kmalloc-ed) address space, change allocation to kvm_kvzalloc() so that it will be vmalloc-ed when its size is more then a page. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-19KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()Takuya Yoshikawa1-3/+5
When all bits in mask are not set, kvm_arch_mmu_enable_log_dirty_pt_masked() has nothing to do. But since it needs to be called from the generic code, it cannot be inlined, and a few function calls, two when PML is enabled, are wasted. Since it is common to see many pages remain clean, e.g. framebuffers can stay calm for a long time, it is worth eliminating this overhead. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-17Merge tag 'kvm-arm-fixes-4.0-rc5' of ↵Marcelo Tosatti3-2/+36
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm Fixes for KVM/ARM for 4.0-rc5. Fixes page refcounting issues in our Stage-2 page table management code, fixes a missing unlock in a gicv3 error path, and fixes a race that can cause lost interrupts if signals are pending just prior to entering the guest.
2015-03-14arm/arm64: KVM: Fix migration race in the arch timerChristoffer Dall1-9/+36
When a VCPU is no longer running, we currently check to see if it has a timer scheduled in the future, and if it does, we schedule a host hrtimer to notify is in case the timer expires while the VCPU is still not running. When the hrtimer fires, we mask the guest's timer and inject the timer IRQ (still relying on the guest unmasking the time when it receives the IRQ). This is all good and fine, but when migration a VM (checkpoint/restore) this introduces a race. It is unlikely, but possible, for the following sequence of events to happen: 1. Userspace stops the VM 2. Hrtimer for VCPU is scheduled 3. Userspace checkpoints the VGIC state (no pending timer interrupts) 4. The hrtimer fires, schedules work in a workqueue 5. Workqueue function runs, masks the timer and injects timer interrupt 6. Userspace checkpoints the timer state (timer masked) At restore time, you end up with a masked timer without any timer interrupts and your guest halts never receiving timer interrupts. Fix this by only kicking the VCPU in the workqueue function, and sample the expired state of the timer when entering the guest again and inject the interrupt and mask the timer only then. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-14arm/arm64: KVM: support for un-queuing active IRQsChristoffer Dall3-37/+198
Migrating active interrupts causes the active state to be lost completely. This implements some additional bitmaps to track the active state on the distributor and export this to user space. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>