summaryrefslogtreecommitdiff
path: root/virt
AgeCommit message (Collapse)AuthorFilesLines
2022-12-28Merge branch 'kvm-late-6.1-fixes' into HEADPaolo Bonzini1-4/+0
x86: * several fixes to nested VMX execution controls * fixes and clarification to the documentation for Xen emulation * do not unnecessarily release a pmu event with zero period * MMU fixes * fix Coverity warning in kvm_hv_flush_tlb() selftests: * fixes for the ucall mechanism in selftests * other fixes mostly related to compilation with clang
2022-12-27kvm: Remove the unused macro KVM_MMU_READ_{,UN}LOCK()Lai Jiangshan1-4/+0
No code is using KVM_MMU_READ_LOCK() or KVM_MMU_READ_UNLOCK(). They used to be in virt/kvm/pfncache.c: KVM_MMU_READ_LOCK(kvm); retry = mmu_notifier_retry_hva(kvm, mmu_seq, uhva); KVM_MMU_READ_UNLOCK(kvm); However, since 58cd407ca4c6 ("KVM: Fix multiple races in gfn=>pfn cache refresh", 2022-05-25) the code is only relying on the MMU notifier's invalidation count and sequence number. Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com> Message-Id: <20221207120617.9409-1-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds6-92/+188
Pull kvm updates from Paolo Bonzini: "ARM64: - Enable the per-vcpu dirty-ring tracking mechanism, together with an option to keep the good old dirty log around for pages that are dirtied by something other than a vcpu. - Switch to the relaxed parallel fault handling, using RCU to delay page table reclaim and giving better performance under load. - Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option, which multi-process VMMs such as crosvm rely on (see merge commit 382b5b87a97d: "Fix a number of issues with MTE, such as races on the tags being initialised vs the PG_mte_tagged flag as well as the lack of support for VM_SHARED when KVM is involved. Patches from Catalin Marinas and Peter Collingbourne"). - Merge the pKVM shadow vcpu state tracking that allows the hypervisor to have its own view of a vcpu, keeping that state private. - Add support for the PMUv3p5 architecture revision, bringing support for 64bit counters on systems that support it, and fix the no-quite-compliant CHAIN-ed counter support for the machines that actually exist out there. - Fix a handful of minor issues around 52bit VA/PA support (64kB pages only) as a prefix of the oncoming support for 4kB and 16kB pages. - Pick a small set of documentation and spelling fixes, because no good merge window would be complete without those. s390: - Second batch of the lazy destroy patches - First batch of KVM changes for kernel virtual != physical address support - Removal of a unused function x86: - Allow compiling out SMM support - Cleanup and documentation of SMM state save area format - Preserve interrupt shadow in SMM state save area - Respond to generic signals during slow page faults - Fixes and optimizations for the non-executable huge page errata fix. - Reprogram all performance counters on PMU filter change - Cleanups to Hyper-V emulation and tests - Process Hyper-V TLB flushes from a nested guest (i.e. from a L2 guest running on top of a L1 Hyper-V hypervisor) - Advertise several new Intel features - x86 Xen-for-KVM: - Allow the Xen runstate information to cross a page boundary - Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured - Add support for 32-bit guests in SCHEDOP_poll - Notable x86 fixes and cleanups: - One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0). - Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few years back when eliminating unnecessary barriers when switching between vmcs01 and vmcs02. - Clean up vmread_error_trampoline() to make it more obvious that params must be passed on the stack, even for x86-64. - Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective of the current guest CPUID. - Fudge around a race with TSC refinement that results in KVM incorrectly thinking a guest needs TSC scaling when running on a CPU with a constant TSC, but no hardware-enumerated TSC frequency. - Advertise (on AMD) that the SMM_CTL MSR is not supported - Remove unnecessary exports Generic: - Support for responding to signals during page faults; introduces new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks Selftests: - Fix an inverted check in the access tracking perf test, and restore support for asserting that there aren't too many idle pages when running on bare metal. - Fix build errors that occur in certain setups (unsure exactly what is unique about the problematic setup) due to glibc overriding static_assert() to a variant that requires a custom message. - Introduce actual atomics for clear/set_bit() in selftests - Add support for pinning vCPUs in dirty_log_perf_test. - Rename the so called "perf_util" framework to "memstress". - Add a lightweight psuedo RNG for guest use, and use it to randomize the access pattern and write vs. read percentage in the memstress tests. - Add a common ucall implementation; code dedup and pre-work for running SEV (and beyond) guests in selftests. - Provide a common constructor and arch hook, which will eventually be used by x86 to automatically select the right hypercall (AMD vs. Intel). - A bunch of added/enabled/fixed selftests for ARM64, covering memslots, breakpoints, stage-2 faults and access tracking. - x86-specific selftest changes: - Clean up x86's page table management. - Clean up and enhance the "smaller maxphyaddr" test, and add a related test to cover generic emulation failure. - Clean up the nEPT support checks. - Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values. - Fix an ordering issue in the AMX test introduced by recent conversions to use kvm_cpu_has(), and harden the code to guard against similar bugs in the future. Anything that tiggers caching of KVM's supported CPUID, kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if the caching occurs before the test opts in via prctl(). Documentation: - Remove deleted ioctls from documentation - Clean up the docs for the x86 MSR filter. - Various fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits) KVM: x86: Add proper ReST tables for userspace MSR exits/flags KVM: selftests: Allocate ucall pool from MEM_REGION_DATA KVM: arm64: selftests: Align VA space allocator with TTBR0 KVM: arm64: Fix benign bug with incorrect use of VA_BITS KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow KVM: x86: Advertise that the SMM_CTL MSR is not supported KVM: x86: remove unnecessary exports KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic" tools: KVM: selftests: Convert clear/set_bit() to actual atomics tools: Drop "atomic_" prefix from atomic test_and_set_bit() tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests perf tools: Use dedicated non-atomic clear/set bit helpers tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers KVM: arm64: selftests: Enable single-step without a "full" ucall() KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself KVM: Remove stale comment about KVM_REQ_UNHALT KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR KVM: Reference to kvm_userspace_memory_region in doc and comments KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl ...
2022-12-12Merge remote-tracking branch 'kvm/queue' into HEADPaolo Bonzini2-62/+54
x86 Xen-for-KVM: * Allow the Xen runstate information to cross a page boundary * Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured * add support for 32-bit guests in SCHEDOP_poll x86 fixes: * One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0). * Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few years back when eliminating unnecessary barriers when switching between vmcs01 and vmcs02. * Clean up the MSR filter docs. * Clean up vmread_error_trampoline() to make it more obvious that params must be passed on the stack, even for x86-64. * Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective of the current guest CPUID. * Fudge around a race with TSC refinement that results in KVM incorrectly thinking a guest needs TSC scaling when running on a CPU with a constant TSC, but no hardware-enumerated TSC frequency. * Advertise (on AMD) that the SMM_CTL MSR is not supported * Remove unnecessary exports Selftests: * Fix an inverted check in the access tracking perf test, and restore support for asserting that there aren't too many idle pages when running on bare metal. * Fix an ordering issue in the AMX test introduced by recent conversions to use kvm_cpu_has(), and harden the code to guard against similar bugs in the future. Anything that tiggers caching of KVM's supported CPUID, kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if the caching occurs before the test opts in via prctl(). * Fix build errors that occur in certain setups (unsure exactly what is unique about the problematic setup) due to glibc overriding static_assert() to a variant that requires a custom message. * Introduce actual atomics for clear/set_bit() in selftests Documentation: * Remove deleted ioctls from documentation * Various fixes
2022-12-09Merge tag 'kvmarm-6.2' of ↵Paolo Bonzini3-14/+103
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 6.2 - Enable the per-vcpu dirty-ring tracking mechanism, together with an option to keep the good old dirty log around for pages that are dirtied by something other than a vcpu. - Switch to the relaxed parallel fault handling, using RCU to delay page table reclaim and giving better performance under load. - Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option, which multi-process VMMs such as crosvm rely on. - Merge the pKVM shadow vcpu state tracking that allows the hypervisor to have its own view of a vcpu, keeping that state private. - Add support for the PMUv3p5 architecture revision, bringing support for 64bit counters on systems that support it, and fix the no-quite-compliant CHAIN-ed counter support for the machines that actually exist out there. - Fix a handful of minor issues around 52bit VA/PA support (64kB pages only) as a prefix of the oncoming support for 4kB and 16kB pages. - Add/Enable/Fix a bunch of selftests covering memslots, breakpoints, stage-2 faults and access tracking. You name it, we got it, we probably broke it. - Pick a small set of documentation and spelling fixes, because no good merge window would be complete without those. As a side effect, this tag also drags: - The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring series - A shared branch with the arm64 tree that repaints all the system registers to match the ARM ARM's naming, and resulting in interesting conflicts
2022-12-05Merge branch kvm-arm64/dirty-ring into kvmarm-master/nextMarc Zyngier3-14/+103
* kvm-arm64/dirty-ring: : . : Add support for the "per-vcpu dirty-ring tracking with a bitmap : and sprinkles on top", courtesy of Gavin Shan. : : This branch drags the kvmarm-fixes-6.1-3 tag which was already : merged in 6.1-rc4 so that the branch is in a working state. : . KVM: Push dirty information unconditionally to backup bitmap KVM: selftests: Automate choosing dirty ring size in dirty_log_test KVM: selftests: Clear dirty ring states between two modes in dirty_log_test KVM: selftests: Use host page size to map ring buffer in dirty_log_test KVM: arm64: Enable ring-based dirty memory tracking KVM: Support dirty ring in conjunction with bitmap KVM: Move declaration of kvm_cpu_dirty_log_size() to kvm_dirty_ring.h KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULL Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-12-02Merge branch 'gpc-fixes' of git://git.infradead.org/users/dwmw2/linux into HEADPaolo Bonzini1-54/+50
Pull Xen-for-KVM changes from David Woodhouse: * add support for 32-bit guests in SCHEDOP_poll * the rest of the gfn-to-pfn cache API cleanup "I still haven't reinstated the last of those patches to make gpc->len immutable." Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-02KVM: Remove stale comment about KVM_REQ_UNHALTSean Christopherson1-4/+0
Remove a comment about KVM_REQ_UNHALT being set by kvm_vcpu_check_block() that was missed when KVM_REQ_UNHALT was dropped. Fixes: c59fb1275838 ("KVM: remove KVM_REQ_UNHALT") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221201220433.31366-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-30KVM: Skip unnecessary "unmap" if gpc is already valid during refreshSean Christopherson1-2/+1
When refreshing a gfn=>pfn cache, skip straight to unlocking if the cache already valid instead of stuffing the "old" variables to turn the unmapping outro into a nop. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
2022-11-30KVM: Drop @gpa from exported gfn=>pfn cache check() and refresh() helpersSean Christopherson1-6/+11
Drop the @gpa param from the exported check()+refresh() helpers and limit changing the cache's GPA to the activate path. All external users just feed in gpc->gpa, i.e. this is a fancy nop. Allowing users to change the GPA at check()+refresh() is dangerous as those helpers explicitly allow concurrent calls, e.g. KVM could get into a livelock scenario. It's also unclear as to what the expected behavior should be if multiple tasks attempt to refresh with different GPAs. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
2022-11-30KVM: Do not partially reinitialize gfn=>pfn cache during activationSean Christopherson1-4/+4
Don't partially reinitialize a gfn=>pfn cache when activating the cache, and instead assert that the cache is not valid during activation. Bug the VM if the assertion fails, as use-after-free and/or data corruption is all but guaranteed if KVM ends up with a valid-but-inactive cache. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
2022-11-30KVM: Drop KVM's API to allow temporarily unmapping gfn=>pfn cacheSean Christopherson1-28/+16
Drop kvm_gpc_unmap() as it has no users and unclear requirements. The API was added as part of the original gfn_to_pfn_cache support, but its sole usage[*] was never merged. Fold the guts of kvm_gpc_unmap() into the deactivate path and drop the API. Omit acquiring refresh_lock as as concurrent calls to kvm_gpc_deactivate() are not allowed (this is not enforced, e.g. via lockdep. due to it being called during vCPU destruction). If/when temporary unmapping makes a comeback, the desirable behavior is likely to restrict temporary unmapping to vCPU-exclusive mappings and require the vcpu->mutex be held to serialize unmap. Use of the refresh_lock to protect unmapping was somewhat specuatively added by commit 93984f19e7bc ("KVM: Fully serialize gfn=>pfn cache refresh via mutex") to guard against concurrent unmaps, but the primary use case of the temporary unmap, nested virtualization[*], doesn't actually need or want concurrent unmaps. [*] https://lore.kernel.org/all/20211210163625.2886-7-dwmw2@infradead.org Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
2022-11-30KVM: Use gfn_to_pfn_cache's immutable "kvm" in kvm_gpc_refresh()Michal Luczaj1-4/+3
Make kvm_gpc_refresh() use kvm instance cached in gfn_to_pfn_cache. No functional change intended. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> [sean: leave kvm_gpc_unmap() as-is] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
2022-11-30KVM: Clean up hva_to_pfn_retry()Michal Luczaj1-4/+4
Make hva_to_pfn_retry() use kvm instance cached in gfn_to_pfn_cache. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
2022-11-30KVM: Use gfn_to_pfn_cache's immutable "kvm" in kvm_gpc_check()Michal Luczaj1-3/+2
Make kvm_gpc_check() use kvm instance cached in gfn_to_pfn_cache. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
2022-11-30KVM: Store immutable gfn_to_pfn_cache propertiesMichal Luczaj1-8/+14
Move the assignment of immutable properties @kvm, @vcpu, and @usage to the initializer. Make _activate() and _deactivate() use stored values. Note, @len is also effectively immutable for most cases, but not in the case of the Xen runstate cache, which may be split across two pages and the length of the first segment will depend on its address. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> [sean: handle @len in a separate patch] Signed-off-by: Sean Christopherson <seanjc@google.com> [dwmw2: acknowledge that @len can actually change for some use cases] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
2022-11-30KVM: x86: Remove unused argument in gpc_unmap_khva()Michal Luczaj1-4/+4
Remove the unused @kvm argument from gpc_unmap_khva(). Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-30KVM: Shorten gfn_to_pfn_cache function namesMichal Luczaj1-10/+10
Formalize "gpc" as the acronym and use it in function names. No functional change intended. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-24Merge branch 'kvm-dwmw2-fixes' into HEADPaolo Bonzini1-1/+6
This brings in a few important fixes for Xen emulation. While nobody should be enabling it, the bug effectively allows userspace to read arbitrary memory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-24Merge branch 'kvm-dwmw2-fixes' into HEADPaolo Bonzini1-1/+6
This brings in a few important fixes for Xen emulation. While nobody should be enabling it, the bug effectively allows userspace to read arbitrary memory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-24KVM: Update gfn_to_pfn_cache khva when it moves within the same pageDavid Woodhouse1-1/+6
In the case where a GPC is refreshed to a different location within the same page, we didn't bother to update it. Mostly we don't need to, but since the ->khva field also includes the offset within the page, that does have to be updated. Fixes: 3ba2c95ea180 ("KVM: Do not incorporate page offset into gfn=>pfn cache user address") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Sean Christopherson <seanjc@google.com> Cc: stable@kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: avoid memslot check in NX hugepage recovery if it cannot succeedPaolo Bonzini1-0/+8
Since gfn_to_memslot() is relatively expensive, it helps to skip it if it the memslot cannot possibly have dirty logging enabled. In order to do this, add to struct kvm a counter of the number of log-page memslots. While the correct value can only be read with slots_lock taken, the NX recovery thread is content with using an approximate value. Therefore, the counter is an atomic_t. Based on https://lore.kernel.org/kvm/20221027200316.2221027-2-dmatlack@google.com/ by David Matlack. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-17KVM: Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLLDavid Matlack1-3/+24
Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL on every halt, rather than just sampling the module parameter when the VM is first created. This restore the original behavior of kvm.halt_poll_ns for VMs that have not opted into KVM_CAP_HALT_POLL. Notably, this change restores the ability for admins to disable or change the maximum halt-polling time system wide for VMs not using KVM_CAP_HALT_POLL. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: acd05785e48c ("kvm: add capability for halt polling") Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20221117001657.1067231-4-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-17KVM: Avoid re-reading kvm->max_halt_poll_ns during halt-pollingDavid Matlack1-6/+15
Avoid re-reading kvm->max_halt_poll_ns multiple times during halt-polling except when it is explicitly useful, e.g. to check if the max time changed across a halt. kvm->max_halt_poll_ns can be changed at any time by userspace via KVM_CAP_HALT_POLL. This bug is unlikely to cause any serious side-effects. In the worst case one halt polls for shorter or longer than it should, and then is fixed up on the next halt. Furthmore, this is still possible since kvm->max_halt_poll_ns are not synchronized with halts. Fixes: acd05785e48c ("kvm: add capability for halt polling") Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20221117001657.1067231-3-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-17KVM: Cap vcpu->halt_poll_ns before halting rather than afterDavid Matlack1-4/+6
Cap vcpu->halt_poll_ns based on the max halt polling time just before halting, rather than after the last halt. This arguably provides better accuracy if an admin disables halt polling in between halts, although the improvement is nominal. A side-effect of this change is that grow_halt_poll_ns() no longer needs to access vcpu->kvm->max_halt_poll_ns, which will be useful in a future commit where the max halt polling time can come from the module parameter halt_poll_ns instead. Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20221117001657.1067231-2-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-12KVM: Push dirty information unconditionally to backup bitmapGavin Shan1-3/+2
In mark_page_dirty_in_slot(), we bail out when no running vcpu exists and a running vcpu context is strictly required by architecture. It may cause backwards compatible issue. Currently, saving vgic/its tables is the only known case where no running vcpu context is expected. We may have other unknown cases where no running vcpu context exists and it's reported by the warning message and we bail out without pushing the dirty information to the backup bitmap. For this, the application is going to enable the backup bitmap for the unknown cases. However, the dirty information can't be pushed to the backup bitmap even though the backup bitmap is enabled for those unknown cases in the application, until the unknown cases are added to the allowed list of non-running vcpu context with extra code changes to the host kernel. In order to make the new application, where the backup bitmap has been enabled, to work with the unchanged host, we continue to push the dirty information to the backup bitmap instead of bailing out early. With the added check on 'memslot->dirty_bitmap' to mark_page_dirty_in_slot(), the kernel crash is avoided silently by the combined conditions: no running vcpu context, kvm_arch_allow_write_without_running_vcpu() returns 'true', and the backup bitmap (KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP) isn't enabled yet. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221112094322.21911-1-gshan@redhat.com
2022-11-10KVM: Support dirty ring in conjunction with bitmapGavin Shan3-9/+72
ARM64 needs to dirty memory outside of a VCPU context when VGIC/ITS is enabled. It's conflicting with that ring-based dirty page tracking always requires a running VCPU context. Introduce a new flavor of dirty ring that requires the use of both VCPU dirty rings and a dirty bitmap. The expectation is that for non-VCPU sources of dirty memory (such as the VGIC/ITS on arm64), KVM writes to the dirty bitmap. Userspace should scan the dirty bitmap before migrating the VM to the target. Use an additional capability to advertise this behavior. The newly added capability (KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP) can't be enabled before KVM_CAP_DIRTY_LOG_RING_ACQ_REL on ARM64. In this way, the newly added capability is treated as an extension of KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Suggested-by: Marc Zyngier <maz@kernel.org> Suggested-by: Peter Xu <peterx@redhat.com> Co-developed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221110104914.31280-4-gshan@redhat.com
2022-11-10KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULLGavin Shan2-4/+31
The VCPU isn't expected to be runnable when the dirty ring becomes soft full, until the dirty pages are harvested and the dirty ring is reset from userspace. So there is a check in each guest's entrace to see if the dirty ring is soft full or not. The VCPU is stopped from running if its dirty ring has been soft full. The similar check will be needed when the feature is going to be supported on ARM64. As Marc Zyngier suggested, a new event will avoid pointless overhead to check the size of the dirty ring ('vcpu->kvm->dirty_ring_size') in each guest's entrance. Add KVM_REQ_DIRTY_RING_SOFT_FULL. The event is raised when the dirty ring becomes soft full in kvm_dirty_ring_push(). The event is only cleared in the check, done in the newly added helper kvm_dirty_ring_check_request(). Since the VCPU is not runnable when the dirty ring becomes soft full, the KVM_REQ_DIRTY_RING_SOFT_FULL event is always set to prevent the VCPU from running until the dirty pages are harvested and the dirty ring is reset by userspace. kvm_dirty_ring_soft_full() becomes a private function with the newly added helper kvm_dirty_ring_check_request(). The alignment for the various event definitions in kvm_host.h is changed to tab character by the way. In order to avoid using 'container_of()', the argument @ring is replaced by @vcpu in kvm_dirty_ring_push(). Link: https://lore.kernel.org/kvmarm/87lerkwtm5.wl-maz@kernel.org Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221110104914.31280-2-gshan@redhat.com
2022-11-09KVM: replace direct irq.h inclusionPaolo Bonzini1-2/+1
virt/kvm/irqchip.c is including "irq.h" from the arch-specific KVM source directory (i.e. not from arch/*/include) for the sole purpose of retrieving irqchip_in_kernel. Making the function inline in a header that is already included, such as asm/kvm_host.h, is not possible because it needs to look at struct kvm which is defined after asm/kvm_host.h is included. So add a kvm_arch_irqchip_in_kernel non-inline function; irqchip_in_kernel() is only performance critical on arm64 and x86, and the non-inline function is enough on all other architectures. irq.h can then be deleted from all architectures except x86. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-09kvm: Add interruptible flag to __gfn_to_pfn_memslot()Peter Xu3-14/+20
Add a new "interruptible" flag showing that the caller is willing to be interrupted by signals during the __gfn_to_pfn_memslot() request. Wire it up with a FOLL_INTERRUPTIBLE flag that we've just introduced. This prepares KVM to be able to respond to SIGUSR1 (for QEMU that's the SIGIPI) even during e.g. handling an userfaultfd page fault. No functional change intended. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221011195809.557016-4-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-09kvm: Add KVM_PFN_ERR_SIGPENDINGPeter Xu1-0/+2
Add a new pfn error to show that we've got a pending signal to handle during hva_to_pfn_slow() procedure (of -EINTR retval). Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221011195809.557016-3-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-06Merge tag 'kvmarm-fixes-6.1-3' of ↵Paolo Bonzini1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD * Fix the pKVM stage-1 walker erronously using the stage-2 accessor * Correctly convert vcpu->kvm to a hyp pointer when generating an exception in a nVHE+MTE configuration * Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them * Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE * Document the boot requirements for FGT when entering the kernel at EL1
2022-10-31KVM: Check KVM_CAP_DIRTY_LOG_{RING, RING_ACQ_REL} prior to enabling themGavin Shan1-0/+3
There are two capabilities related to ring-based dirty page tracking: KVM_CAP_DIRTY_LOG_RING and KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Both are supported by x86. However, arm64 supports KVM_CAP_DIRTY_LOG_RING_ACQ_REL only when the feature is supported on arm64. The userspace doesn't have to enable the advertised capability, meaning KVM_CAP_DIRTY_LOG_RING can be enabled on arm64 by userspace and it's wrong. Fix it by double checking if the capability has been advertised prior to enabling it. It's rejected to enable the capability if it hasn't been advertised. Fixes: 17601bfed909 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option") Reported-by: Sean Christopherson <seanjc@google.com> Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221031003621.164306-4-gshan@redhat.com
2022-10-27KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cacheSean Christopherson1-7/+34
Reject kvm_gpc_check() and kvm_gpc_refresh() if the cache is inactive. Not checking the active flag during refresh is particularly egregious, as KVM can end up with a valid, inactive cache, which can lead to a variety of use-after-free bugs, e.g. consuming a NULL kernel pointer or missing an mmu_notifier invalidation due to the cache not being on the list of gfns to invalidate. Note, "active" needs to be set if and only if the cache is on the list of caches, i.e. is reachable via mmu_notifier events. If a relevant mmu_notifier event occurs while the cache is "active" but not on the list, KVM will not acquire the cache's lock and so will not serailize the mmu_notifier event with active users and/or kvm_gpc_refresh(). A race between KVM_XEN_ATTR_TYPE_SHARED_INFO and KVM_XEN_HVM_EVTCHN_SEND can be exploited to trigger the bug. 1. Deactivate shinfo cache: kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO kvm_gpc_deactivate kvm_gpc_unmap gpc->valid = false gpc->khva = NULL gpc->active = false Result: active = false, valid = false 2. Cause cache refresh: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast kvm_gpc_check return -EWOULDBLOCK because !gpc->valid kvm_xen_set_evtchn_fast return -EWOULDBLOCK kvm_gpc_refresh hva_to_pfn_retry gpc->valid = true gpc->khva = not NULL Result: active = false, valid = true 3. Race ioctl KVM_XEN_HVM_EVTCHN_SEND against ioctl KVM_XEN_ATTR_TYPE_SHARED_INFO: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast read_lock gpc->lock kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO mutex_lock kvm->lock kvm_xen_shared_info_init kvm_gpc_activate gpc->khva = NULL kvm_gpc_check [ Check passes because gpc->valid is still true, even though gpc->khva is already NULL. ] shinfo = gpc->khva pending_bits = shinfo->evtchn_pending CRASH: test_and_set_bit(..., pending_bits) Fixes: 982ed0de4753 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support") Cc: stable@vger.kernel.org Reported-by: : Michal Luczaj <mhal@rbox.co> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221013211234.1318131-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-27KVM: Initialize gfn_to_pfn_cache locks in dedicated helperMichal Luczaj1-9/+12
Move the gfn_to_pfn_cache lock initialization to another helper and call the new helper during VM/vCPU creation. There are race conditions possible due to kvm_gfn_to_pfn_cache_init()'s ability to re-initialize the cache's locks. For example: a race between ioctl(KVM_XEN_HVM_EVTCHN_SEND) and kvm_gfn_to_pfn_cache_init() leads to a corrupted shinfo gpc lock. (thread 1) | (thread 2) | kvm_xen_set_evtchn_fast | read_lock_irqsave(&gpc->lock, ...) | | kvm_gfn_to_pfn_cache_init | rwlock_init(&gpc->lock) read_unlock_irqrestore(&gpc->lock, ...) | Rename "cache_init" and "cache_destroy" to activate+deactivate to avoid implying that the cache really is destroyed/freed. Note, there more races in the newly named kvm_gpc_activate() that will be addressed separately. Fixes: 982ed0de4753 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support") Cc: stable@vger.kernel.org Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> [sean: call out that this is a bug fix] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221013211234.1318131-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-27KVM: debugfs: Return retval of simple_attr_open() if it failsHou Wenlong1-7/+6
Although simple_attr_open() fails only with -ENOMEM with current code base, it would be nicer to return retval of simple_attr_open() directly in kvm_debugfs_open(). No functional change intended. Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com> Message-Id: <69d64d93accd1f33691b8a383ae555baee80f943.1665975828.git.houwenlong.hwl@antgroup.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-22kvm: Add support for arch compat vm ioctlsAlexander Graf1-0/+11
We will introduce the first architecture specific compat vm ioctl in the next patch. Add all necessary boilerplate to allow architectures to override compat vm ioctls when necessary. Signed-off-by: Alexander Graf <graf@amazon.com> Message-Id: <20221017184541.2658-2-graf@amazon.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-13Merge tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds1-13/+32
Pull VFIO updates from Alex Williamson: - Prune private items from vfio_pci_core.h to a new internal header, fix missed function rename, and refactor vfio-pci interrupt defines (Jason Gunthorpe) - Create consistent naming and handling of ioctls with a function per ioctl for vfio-pci and vfio group handling, use proper type args where available (Jason Gunthorpe) - Implement a set of low power device feature ioctls allowing userspace to make use of power states such as D3cold where supported (Abhishek Sahu) - Remove device counter on vfio groups, which had restricted the page pinning interface to singleton groups to account for limitations in the type1 IOMMU backend. Document usage as limited to emulated IOMMU devices, ie. traditional mdev devices where this restriction is consistent (Jason Gunthorpe) - Correct function prefix in hisi_acc driver incurred during previous refactoring (Shameer Kolothum) - Correct typo and remove redundant warning triggers in vfio-fsl driver (Christophe JAILLET) - Introduce device level DMA dirty tracking uAPI and implementation in the mlx5 variant driver (Yishai Hadas & Joao Martins) - Move much of the vfio_device life cycle management into vfio core, simplifying and avoiding duplication across drivers. This also facilitates adding a struct device to vfio_device which begins the introduction of device rather than group level user support and fills a gap allowing userspace identify devices as vfio capable without implicit knowledge of the driver (Kevin Tian & Yi Liu) - Split vfio container handling to a separate file, creating a more well defined API between the core and container code, masking IOMMU backend implementation from the core, allowing for an easier future transition to an iommufd based implementation of the same (Jason Gunthorpe) - Attempt to resolve race accessing the iommu_group for a device between vfio releasing DMA ownership and removal of the device from the IOMMU driver. Follow-up with support to allow vfio_group to exist with NULL iommu_group pointer to support existing userspace use cases of holding the group file open (Jason Gunthorpe) - Fix error code and hi/lo register manipulation issues in the hisi_acc variant driver, along with various code cleanups (Longfang Liu) - Fix a prior regression in GVT-g group teardown, resulting in unreleased resources (Jason Gunthorpe) - A significant cleanup and simplification of the mdev interface, consolidating much of the open coded per driver sysfs interface support into the mdev core (Christoph Hellwig) - Simplification of tracking and locking around vfio_groups that fall out from previous refactoring (Jason Gunthorpe) - Replace trivial open coded f_ops tests with new helper (Alex Williamson) * tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits) vfio: More vfio_file_is_group() use cases vfio: Make the group FD disassociate from the iommu_group vfio: Hold a reference to the iommu_group in kvm for SPAPR vfio: Add vfio_file_is_group() vfio: Change vfio_group->group_rwsem to a mutex vfio: Remove the vfio_group->users and users_comp vfio/mdev: add mdev available instance checking to the core vfio/mdev: consolidate all the description sysfs into the core code vfio/mdev: consolidate all the available_instance sysfs into the core code vfio/mdev: consolidate all the name sysfs into the core code vfio/mdev: consolidate all the device_api sysfs into the core code vfio/mdev: remove mtype_get_parent_dev vfio/mdev: remove mdev_parent_dev vfio/mdev: unexport mdev_bus_type vfio/mdev: remove mdev_from_dev vfio/mdev: simplify mdev_type handling vfio/mdev: embedd struct mdev_parent in the parent data structure vfio/mdev: make mdev.h standalone includable drm/i915/gvt: simplify vgpu configuration management drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types ...
2022-10-07vfio: Hold a reference to the iommu_group in kvm for SPAPRJason Gunthorpe1-11/+14
SPAPR exists completely outside the normal iommu driver framework, the groups it creates are fake and are only created to enable VFIO's uAPI. Thus, it does not need to follow the iommu core rule that the iommu_group will only be touched while a driver is attached. Carry a group reference into KVM and have KVM directly manage the lifetime of this object independently of VFIO. This means KVM no longer relies on the vfio group file being valid to maintain the group reference. Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/2-v2-15417f29324e+1c-vfio_group_disassociate_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-07vfio: Add vfio_file_is_group()Jason Gunthorpe1-2/+18
This replaces uses of vfio_file_iommu_group() which were only detecting if the file is a VFIO file with no interest in the actual group. The only remaning user of vfio_file_iommu_group() is in KVM for the SPAPR stuff. It passes the iommu_group into the arch code through kvm for some reason. Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1-v2-15417f29324e+1c-vfio_group_disassociate_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-03Merge tag 'kvmarm-6.1' of ↵Paolo Bonzini3-3/+24
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for v6.1 - Fixes for single-stepping in the presence of an async exception as well as the preservation of PSTATE.SS - Better handling of AArch32 ID registers on AArch64-only systems - Fixes for the dirty-ring API, allowing it to work on architectures with relaxed memory ordering - Advertise the new kvmarm mailing list - Various minor cleanups and spelling fixes
2022-09-29KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config optionMarc Zyngier2-1/+22
In order to differenciate between architectures that require no extra synchronisation when accessing the dirty ring and those who do, add a new capability (KVM_CAP_DIRTY_LOG_RING_ACQ_REL) that identify the latter sort. TSO architectures can obviously advertise both, while relaxed architectures must only advertise the ACQ_REL version. This requires some configuration symbol rejigging, with HAVE_KVM_DIRTY_RING being only indirectly selected by two top-level config symbols: - HAVE_KVM_DIRTY_RING_TSO for strongly ordered architectures (x86) - HAVE_KVM_DIRTY_RING_ACQ_REL for weakly ordered architectures (arm64) Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/20220926145120.27974-3-maz@kernel.org
2022-09-29KVM: Use acquire/release semantics when accessing dirty ring GFN stateMarc Zyngier1-2/+2
The current implementation of the dirty ring has an implicit requirement that stores to the dirty ring from userspace must be: - be ordered with one another - visible from another CPU executing a ring reset While these implicit requirements work well for x86 (and any other TSO-like architecture), they do not work for more relaxed architectures such as arm64 where stores to different addresses can be freely reordered, and loads from these addresses not observing writes from another CPU unless the required barriers (or acquire/release semantics) are used. In order to start fixing this, upgrade the ring reset accesses: - the kvm_dirty_gfn_harvested() helper now uses acquire semantics so it is ordered after all previous writes, including that from userspace - the kvm_dirty_gfn_set_invalid() helper now uses release semantics so that the next_slot and next_offset reads don't drift past the entry invalidation This is only a partial fix as the userspace side also need upgrading. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/20220926145120.27974-2-maz@kernel.org
2022-09-26KVM: remove KVM_REQ_UNHALTPaolo Bonzini1-3/+1
KVM_REQ_UNHALT is now unnecessary because it is replaced by the return value of kvm_vcpu_block/kvm_vcpu_halt. Remove it. No functional change intended. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Message-Id: <20220921003201.1441511-13-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-26KVM: fix memoryleak in kvm_init()Miaohe Lin1-3/+2
When alloc_cpumask_var_node() fails for a certain cpu, there might be some allocated cpumasks for percpu cpu_kick_mask. We should free these cpumasks or memoryleak will occur. Fixes: baff59ccdc65 ("KVM: Pre-allocate cpumasks for kvm_make_all_cpus_request_except()") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Link: https://lore.kernel.org/r/20220823063414.59778-1-linmiaohe@huawei.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-19KVM: Drop unnecessary initialization of "ops" in kvm_ioctl_create_device()Li kunyu1-1/+1
The variable is initialized but it is only used after its assignment. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Li kunyu <kunyu@nfschina.com> Message-Id: <20220819021535.483702-1-kunyu@nfschina.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-19KVM: Drop unnecessary initialization of "npages" in hva_to_pfn_slow()Li kunyu1-1/+1
The variable is initialized but it is only used after its assignment. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Li kunyu <kunyu@nfschina.com> Message-Id: <20220819022804.483914-1-kunyu@nfschina.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-19KVM: Rename mmu_notifier_* to mmu_invalidate_*Chao Peng2-33/+36
The motivation of this renaming is to make these variables and related helper functions less mmu_notifier bound and can also be used for non mmu_notifier based page invalidation. mmu_invalidate_* was chosen to better describe the purpose of 'invalidating' a page that those variables are used for. - mmu_notifier_seq/range_start/range_end are renamed to mmu_invalidate_seq/range_start/range_end. - mmu_notifier_retry{_hva} helper functions are renamed to mmu_invalidate_retry{_hva}. - mmu_notifier_count is renamed to mmu_invalidate_in_progress to avoid confusion with mn_active_invalidate_count. - While here, also update kvm_inc/dec_notifier_count() to kvm_mmu_invalidate_begin/end() to match the change for mmu_notifier_count. No functional change intended. Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-19KVM: Move coalesced MMIO initialization (back) into kvm_create_vm()Sean Christopherson1-5/+6
Invoke kvm_coalesced_mmio_init() from kvm_create_vm() now that allocating and initializing coalesced MMIO objects is separate from registering any associated devices. Moving coalesced MMIO cleans up the last oddity where KVM does VM creation/initialization after kvm_create_vm(), and more importantly after kvm_arch_post_init_vm() is called and the VM is added to the global vm_list, i.e. after the VM is fully created as far as KVM is concerned. Originally, kvm_coalesced_mmio_init() was called by kvm_create_vm(), but the original implementation was completely devoid of error handling. Commit 6ce5a090a9a0 ("KVM: coalesced_mmio: fix kvm_coalesced_mmio_init()'s error handling" fixed the various bugs, and in doing so rightly moved the call to after kvm_create_vm() because kvm_coalesced_mmio_init() also registered the coalesced MMIO device. Commit 2b3c246a682c ("KVM: Make coalesced mmio use a device per zone") cleaned up that mess by having each zone register a separate device, i.e. moved device registration to its logical home in kvm_vm_ioctl_register_coalesced_mmio(). As a result, kvm_coalesced_mmio_init() is now a "pure" initialization helper and can be safely called from kvm_create_vm(). Opportunstically drop the #ifdef, KVM provides stubs for kvm_coalesced_mmio_{init,free}() when CONFIG_KVM_MMIO=n (s390). Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220816053937.2477106-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-19KVM: Unconditionally get a ref to /dev/kvm module when creating a VMSean Christopherson1-10/+4
Unconditionally get a reference to the /dev/kvm module when creating a VM instead of using try_get_module(), which will fail if the module is in the process of being forcefully unloaded. The error handling when try_get_module() fails doesn't properly unwind all that has been done, e.g. doesn't call kvm_arch_pre_destroy_vm() and doesn't remove the VM from the global list. Not removing VMs from the global list tends to be fatal, e.g. leads to use-after-free explosions. The obvious alternative would be to add proper unwinding, but the justification for using try_get_module(), "rmmod --wait", is completely bogus as support for "rmmod --wait", i.e. delete_module() without O_NONBLOCK, was removed by commit 3f2b9c9cdf38 ("module: remove rmmod --wait option.") nearly a decade ago. It's still possible for try_get_module() to fail due to the module dying (more like being killed), as the module will be tagged MODULE_STATE_GOING by "rmmod --force", i.e. delete_module(..., O_TRUNC), but playing nice with forced unloading is an exercise in futility and gives a falsea sense of security. Using try_get_module() only prevents acquiring _new_ references, it doesn't magically put the references held by other VMs, and forced unloading doesn't wait, i.e. "rmmod --force" on KVM is all but guaranteed to cause spectacular fireworks; the window where KVM will fail try_get_module() is tiny compared to the window where KVM is building and running the VM with an elevated module refcount. Addressing KVM's inability to play nice with "rmmod --force" is firmly out-of-scope. Forcefully unloading any module taints kernel (for obvious reasons) _and_ requires the kernel to be built with CONFIG_MODULE_FORCE_UNLOAD=y, which is off by default and comes with the amusing disclaimer that it's "mainly for kernel developers and desperate users". In other words, KVM is free to scoff at bug reports due to using "rmmod --force" while VMs may be running. Fixes: 5f6de5cbebee ("KVM: Prevent module exit until all VMs are freed") Cc: stable@vger.kernel.org Cc: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220816053937.2477106-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>