summaryrefslogtreecommitdiff
path: root/virt
AgeCommit message (Collapse)AuthorFilesLines
2014-07-30kvm: arm64: vgic: fix hyp panic with 64k pages on juno platformWill Deacon1-4/+20
If the physical address of GICV isn't page-aligned, then we end up creating a stage-2 mapping of the page containing it, which causes us to map neighbouring memory locations directly into the guest. As an example, consider a platform with GICV at physical 0x2c02f000 running a 64k-page host kernel. If qemu maps this into the guest at 0x80010000, then guest physical addresses 0x80010000 - 0x8001efff will map host physical region 0x2c020000 - 0x2c02efff. Accesses to these physical regions may cause UNPREDICTABLE behaviour, for example, on the Juno platform this will cause an SError exception to EL3, which brings down the entire physical CPU resulting in RCU stalls / HYP panics / host crashing / wasted weeks of debugging. SBSA recommends that systems alias the 4k GICV across the bounding 64k region, in which case GICV physical could be described as 0x2c020000 in the above scenario. This patch fixes the problem by failing the vgic probe if the physical base address or the size of GICV aren't page-aligned. Note that this generated a warning in dmesg about freeing enabled IRQs, so I had to move the IRQ enabling later in the probe. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Joel Schopp <joel.schopp@amd.com> Cc: Don Dutile <ddutile@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Joel Schopp <joel.schopp@amd.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-06-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more scheduler updates from Ingo Molnar: "Second round of scheduler changes: - try-to-wakeup and IPI reduction speedups, from Andy Lutomirski - continued power scheduling cleanups and refactorings, from Nicolas Pitre - misc fixes and enhancements" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Delete extraneous extern for to_ratio() sched/idle: Optimize try-to-wake-up IPI sched/idle: Simplify wake_up_idle_cpu() sched/idle: Clear polling before descheduling the idle thread sched, trace: Add a tracepoint for IPI-less remote wakeups cpuidle: Set polling in poll_idle sched: Remove redundant assignment to "rt_rq" in update_curr_rt(...) sched: Rename capacity related flags sched: Final power vs. capacity cleanups sched: Remove remaining dubious usage of "power" sched: Let 'struct sched_group_power' care about CPU capacity sched/fair: Disambiguate existing/remaining "capacity" usage sched/fair: Change "has_capacity" to "has_free_capacity" sched/fair: Remove "power" from 'struct numa_stats' sched: Fix signedness bug in yield_to() sched/fair: Use time_after() in record_wakee() sched/balancing: Reduce the rate of needless idle load balancing sched/fair: Fix unlocked reads of some cfs_b->quota/period
2014-06-05sched: Fix signedness bug in yield_to()Dan Carpenter1-2/+2
yield_to() is supposed to return -ESRCH if there is no task to yield to, but because the type is bool that is the same as returning true. The only place I see which cares is kvm_vcpu_on_spin(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Raghavendra <raghavendra.kt@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/20140523102042.GA7267@mwanda Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm into nextLinus Torvalds5-50/+95
Pull KVM updates from Paolo Bonzini: "At over 200 commits, covering almost all supported architectures, this was a pretty active cycle for KVM. Changes include: - a lot of s390 changes: optimizations, support for migration, GDB support and more - ARM changes are pretty small: support for the PSCI 0.2 hypercall interface on both the guest and the host (the latter acked by Catalin) - initial POWER8 and little-endian host support - support for running u-boot on embedded POWER targets - pretty large changes to MIPS too, completing the userspace interface and improving the handling of virtualized timer hardware - for x86, a larger set of changes is scheduled for 3.17. Still, we have a few emulator bugfixes and support for running nested fully-virtualized Xen guests (para-virtualized Xen guests have always worked). And some optimizations too. The only missing architecture here is ia64. It's not a coincidence that support for KVM on ia64 is scheduled for removal in 3.17" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits) KVM: add missing cleanup_srcu_struct KVM: PPC: Book3S PR: Rework SLB switching code KVM: PPC: Book3S PR: Use SLB entry 0 KVM: PPC: Book3S HV: Fix machine check delivery to guest KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs KVM: PPC: Book3S HV: Make sure we don't miss dirty pages KVM: PPC: Book3S HV: Fix dirty map for hugepages KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates() KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number KVM: PPC: Book3S: Add ONE_REG register names that were missed KVM: PPC: Add CAP to indicate hcall fixes KVM: PPC: MPIC: Reset IRQ source private members KVM: PPC: Graciously fail broken LE hypercalls PPC: ePAPR: Fix hypercall on LE guest KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler KVM: PPC: BOOK3S: Always use the saved DAR value PPC: KVM: Make NX bit available with magic page KVM: PPC: Disable NX for old magic page using guests KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest ...
2014-06-03KVM: add missing cleanup_srcu_structPaolo Bonzini1-0/+1
Reported-by: hrg <hrgstephen@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-05kvm/irqchip: Speed up KVM_SET_GSI_ROUTINGChristian Borntraeger4-39/+50
When starting lots of dataplane devices the bootup takes very long on Christian's s390 with irqfd patches. With larger setups he is even able to trigger some timeouts in some components. Turns out that the KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec) when having multiple CPUs. This is caused by the synchronize_rcu and the HZ=100 of s390. By changing the code to use a private srcu we can speed things up. This patch reduces the boot time till mounting root from 8 to 2 seconds on my s390 guest with 100 disks. Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu are fine because they do not have lockdep checks (hlist_for_each_entry_rcu uses rcu_dereference_raw rather than rcu_dereference, and write-sides do not do rcu lockdep at all). Note that we're hardly relying on the "sleepable" part of srcu. We just want SRCU's faster detection of grace periods. Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS and RR. The difference between results "before" and "after" the patch has mean -0.2% and standard deviation 0.6%. Using a paired t-test on the data points says that there is a 2.5% probability that the patch is the cause of the performance difference (rather than a random fluctuation). (Restricting the t-test to RR, which is the most likely to be affected, changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8% probability that the numbers actually say something about the patch. The probability increases mostly because there are fewer data points). Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-30Merge tag 'kvm-arm-for-3.15-rc4' of ↵Paolo Bonzini1-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master First round of KVM/ARM Fixes for 3.15 Includes vgic fixes, a possible kernel corruption bug due to misalignment of pages and disabling of KVM in KConfig on big-endian systems, because the last one breaks the build.
2014-04-29KVM: ARM: vgic: Fix the overlap check action about setting the GICD & GICC ↵Haibin Wang1-2/+3
base address. Currently below check in vgic_ioaddr_overlap will always succeed, because the vgic dist base and vgic cpu base are still kept UNDEF after initialization. The code as follows will be return forever. if (IS_VGIC_ADDR_UNDEF(dist) || IS_VGIC_ADDR_UNDEF(cpu)) return 0; So, before invoking the vgic_ioaddr_overlap, it needs to set the corresponding base address firstly. Signed-off-by: Haibin Wang <wanghaibin.wang@huawei.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-28KVM: async_pf: change async_pf_execute() to use get_user_pages(tsk => NULL)Oleg Nesterov1-1/+1
async_pf_execute() passes tsk == current to gup(), this is doesn't hurt but unnecessary and misleading. "tsk" is only used to account the number of faults and current is the random workqueue thread. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-28KVM: async_pf: kill the unnecessary use_mm/unuse_mm async_pf_execute()Oleg Nesterov1-2/+0
async_pf_execute() has no reasons to adopt apf->mm, gup(current, mm) should work just fine even if current has another or NULL ->mm. Recently kvm_async_page_present_sync() was added insedie the "use_mm" section, but it seems that it doesn't need current->mm too. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-28KVM: arm/arm64: vgic: fix GICD_ICFGR register accessesAndre Przywara1-5/+4
Since KVM internally represents the ICFGR registers by stuffing two of them into one word, the offset for accessing the internal representation and the one for the MMIO based access are different. So keep the original offset around, but adjust the internal array offset by one bit. Reported-by: Haibin Wang <wanghaibin.wang@huawei.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-28KVM: async_pf: mm->mm_users can not pin apf->mmOleg Nesterov1-4/+4
get_user_pages(mm) is simply wrong if mm->mm_users == 0 and exit_mmap/etc was already called (or is in progress), mm->mm_count can only pin mm->pgd and mm_struct itself. Change kvm_setup_async_pf/async_pf_execute to inc/dec mm->mm_users. kvm_create_vm/kvm_destroy_vm play with ->mm_count too but this case looks fine at first glance, it seems that this ->mm is only used to verify that current->mm == kvm->mm. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-28KVM: ARM: vgic: Fix sgi dispatch problemHaibin Wang1-0/+1
When dispatch SGI(mode == 0), that is the vcpu of VM should send sgi to the cpu which the target_cpus list. So, there must add the "break" to branch of case 0. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Haibin Wang <wanghaibin.wang@huawei.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-28kvm: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev1-1/+2
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-24Revert "KVM: Simplify kvm->tlbs_dirty handling"Xiao Guangrong1-1/+4
This reverts commit 5befdc385ddb2d5ae8995ad89004529a3acf58fc. Since we will allow flush tlb out of mmu-lock in the later patch Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-22Merge tag 'kvm-s390-20140422' of ↵Marcelo Tosatti1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into queue Lazy storage key handling ------------------------- Linux does not use the ACC and F bits of the storage key. Newer Linux versions also do not use the storage keys for dirty and reference tracking. We can optimize the guest handling for those guests for faults as well as page-in and page-out by simply not caring about the guest visible storage key. We trap guest storage key instruction to enable those keys only on demand. Migration bitmap Until now s390 never provided a proper dirty bitmap. Let's provide a proper migration bitmap for s390. We also change the user dirty tracking to a fault based mechanism. This makes the host completely independent from the storage keys. Long term this will allow us to back guest memory with large pages. per-VM device attributes ------------------------ To avoid the introduction of new ioctls, let's provide the attribute semanantic also on the VM-"device". Userspace controlled CMMA ------------------------- The CMMA assist is changed from "always on" to "on if requested" via per-VM device attributes. In addition a callback to reset all usage states is provided. Proper guest DAT handling for intercepts ---------------------------------------- While instructions handled by SIE take care of all addressing aspects, KVM/s390 currently does not care about guest address translation of intercepts. This worked out fine, because - the s390 Linux kernel has a 1:1 mapping between kernel virtual<->real for all pages up to memory size - intercepts happen only for a small amount of cases - all of these intercepts happen to be in the kernel text for current distros Of course we need to be better for other intercepts, kernel modules etc. We provide the infrastructure and rework all in-kernel intercepts to work on logical addresses (paging etc) instead of real ones. The code has been running internally for several months now, so it is time for going public. GDB support ----------- We provide breakpoints, single stepping and watchpoints. Fixes/Cleanups -------------- - Improve program check delivery - Factor out the handling of transactional memory on program checks - Use the existing define __LC_PGM_TDB - Several cleanups in the lowcore structure - Documentation NOTES ----- - All patches touching base s390 are either ACKed or written by the s390 maintainers - One base KVM patch "KVM: add kvm_is_error_gpa() helper" - One patch introduces the notion of VM device attributes Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Conflicts: include/uapi/linux/kvm.h
2014-04-22KVM: s390: Add proper dirty bitmap support to S390 kvm.Jason J. Herne1-2/+0
Replace the kvm_s390_sync_dirty_log() stub with code to construct the KVM dirty_bitmap from S390 memory change bits. Also add code to properly clear the dirty_bitmap size when clearing the bitmap. Signed-off-by: Jason J. Herne <jjherne@us.ibm.com> CC: Dominik Dingel <dingel@linux.vnet.ibm.com> [Dominik Dingel: use gmap_test_and_clear_dirty, locking fixes] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-04-17KVM: VMX: speed up wildcard MMIO EVENTFDMichael S. Tsirkin2-0/+17
With KVM, MMIO is much slower than PIO, due to the need to do page walk and emulation. But with EPT, it does not have to be: we know the address from the VMCS so if the address is unique, we can look up the eventfd directly, bypassing emulation. Unfortunately, this only works if userspace does not need to match on access length and data. The implementation adds a separate FAST_MMIO bus internally. This serves two purposes: - minimize overhead for old userspace that does not use eventfd with lengtth = 0 - minimize disruption in other code (since we don't know the length, devices on the MMIO bus only get a valid address in write, this way we don't need to touch all devices to teach them to handle an invalid length) At the moment, this optimization only has effect for EPT on x86. It will be possible to speed up MMIO for NPT and MMU using the same idea in the future. With this patch applied, on VMX MMIO EVENTFD is essentially as fast as PIO. I was unable to detect any measureable slowdown to non-eventfd MMIO. Making MMIO faster is important for the upcoming virtio 1.0 which includes an MMIO signalling capability. The idea was suggested by Peter Anvin. Lots of thanks to Gleb for pre-review and suggestions. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-17KVM: support any-length wildcard ioeventfdMichael S. Tsirkin1-5/+22
It is sometimes benefitial to ignore IO size, and only match on address. In hindsight this would have been a better default than matching length when KVM_IOEVENTFD_FLAG_DATAMATCH is not set, In particular, this kind of access can be optimized on VMX: there no need to do page lookups. This can currently be done with many ioeventfds but in a suboptimal way. However we can't change kernel/userspace ABI without risk of breaking some applications. Use len = 0 to mean "ignore length for matching" in a more optimal way. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-15Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-6/+19
Pull KVM fixes from Marcelo Tosatti: - Fix for guest triggerable BUG_ON (CVE-2014-0155) - CR4.SMAP support - Spurious WARN_ON() fix * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: remove WARN_ON from get_kernel_ns() KVM: Rename variable smep to cr4_smep KVM: expose SMAP feature to guest KVM: Disable SMAP for guests in EPT realmode and EPT unpaging mode KVM: Add SMAP support when setting CR4 KVM: Remove SMAP bit from CR4_RESERVED_BITS KVM: ioapic: try to recover if pending_eoi goes out of range KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155)
2014-04-08arm, kvm: fix double lock on cpu_add_remove_lockMing Lei2-2/+2
Commit 8146875de7d4 (arm, kvm: Fix CPU hotplug callback registration) holds the lock before calling the two functions: kvm_vgic_hyp_init() kvm_timer_hyp_init() and both the two functions are calling register_cpu_notifier() to register cpu notifier, so cause double lock on cpu_add_remove_lock. Considered that both two functions are only called inside kvm_arch_init() with holding cpu_add_remove_lock, so simply use __register_cpu_notifier() to fix the problem. Fixes: 8146875de7d4 (arm, kvm: Fix CPU hotplug callback registration) Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04KVM: ioapic: try to recover if pending_eoi goes out of rangePaolo Bonzini1-5/+18
The RTC tracking code tracks the cardinality of rtc_status.dest_map into rtc_status.pending_eoi. It has some WARN_ONs that trigger if pending_eoi ever becomes negative; however, these do not do anything to recover, and it bad things will happen soon after they trigger. When the next RTC interrupt is triggered, rtc_check_coalesced() will return false, but ioapic_service will find pending_eoi != 0 and do a BUG_ON. To avoid this, should pending_eoi ever be nonzero, call kvm_rtc_eoi_tracking_restore_all to recompute a correct dest_map and pending_eoi. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-04KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155)Paolo Bonzini1-1/+1
QE reported that they got the BUG_ON in ioapic_service to trigger. I cannot reproduce it, but there are two reasons why this could happen. The less likely but also easiest one, is when kvm_irq_delivery_to_apic does not deliver to any APIC and returns -1. Because irqe.shorthand == 0, the kvm_for_each_vcpu loop in that function is never reached. However, you can target the similar loop in kvm_irq_delivery_to_apic_fast; just program a zero logical destination address into the IOAPIC, or an out-of-range physical destination address. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-04Merge tag 'vfio-v3.15-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds1-7/+20
Pull VFIO updates from Alex Williamson: "VFIO updates for v3.15 include: - Allow the vfio-type1 IOMMU to support multiple domains within a container - Plumb path to query whether all domains are cache-coherent - Wire query into kvm-vfio device to avoid KVM x86 WBINVD emulation - Always select CONFIG_ANON_INODES, vfio depends on it (Arnd) The first patch also makes the vfio-type1 IOMMU driver completely independent of the bus_type of the devices it's handling, which enables it to be used for both vfio-pci and a future vfio-platform (and hopefully combinations involving both simultaneously)" * tag 'vfio-v3.15-rc1' of git://github.com/awilliam/linux-vfio: vfio: always select ANON_INODES kvm/vfio: Support for DMA coherent IOMMUs vfio: Add external user check extension interface vfio/type1: Add extension to test DMA cache coherence of IOMMU vfio/iommu_type1: Multi-IOMMU domain support
2014-04-03Merge tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-51/+108
Pull kvm updates from Paolo Bonzini: "PPC and ARM do not have much going on this time. Most of the cool stuff, instead, is in s390 and (after a few releases) x86. ARM has some caching fixes and PPC has transactional memory support in guests. MIPS has some fixes, with more probably coming in 3.16 as QEMU will soon get support for MIPS KVM. For x86 there are optimizations for debug registers, which trigger on some Windows games, and other important fixes for Windows guests. We now expose to the guest Broadwell instruction set extensions and also Intel MPX. There's also a fix/workaround for OS X guests, nested virtualization features (preemption timer), and a couple kvmclock refinements. For s390, the main news is asynchronous page faults, together with improvements to IRQs (floating irqs and adapter irqs) that speed up virtio devices" * tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits) KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8 KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode KVM: PPC: Book3S HV: Return ENODEV error rather than EIO KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state KVM: PPC: Book3S HV: Add transactional memory support KVM: Specify byte order for KVM_EXIT_MMIO KVM: vmx: fix MPX detection KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write KVM: s390: clear local interrupts at cpu initial reset KVM: s390: Fix possible memory leak in SIGP functions KVM: s390: fix calculation of idle_mask array size KVM: s390: randomize sca address KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP KVM: Bump KVM_MAX_IRQ_ROUTES for s390 KVM: s390: irq routing for adapter interrupts. KVM: s390: adapter interrupt sources ...
2014-04-01Merge branch 'x86-asmlinkage-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 LTO changes from Peter Anvin: "More infrastructure work in preparation for link-time optimization (LTO). Most of these changes is to make sure symbols accessed from assembly code are properly marked as visible so the linker doesn't remove them. My understanding is that the changes to support LTO are still not upstream in binutils, but are on the way there. This patchset should conclude the x86-specific changes, and remaining patches to actually enable LTO will be fed through the Kbuild tree (other than keeping up with changes to the x86 code base, of course), although not necessarily in this merge window" * 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) Kbuild, lto: Handle basic LTO in modpost Kbuild, lto: Disable LTO for asm-offsets.c Kbuild, lto: Add a gcc-ld script to let run gcc as ld Kbuild, lto: add ld-version and ld-ifversion macros Kbuild, lto: Drop .number postfixes in modpost Kbuild, lto, workaround: Don't warn for initcall_reference in modpost lto: Disable LTO for sys_ni lto: Handle LTO common symbols in module loader lto, workaround: Add workaround for initcall reordering lto: Make asmlinkage __visible x86, lto: Disable LTO for the x86 VDSO initconst, x86: Fix initconst mistake in ts5500 code initconst: Fix initconst mistake in dcdbas asmlinkage: Make trace_hardirqs_on/off_caller visible asmlinkage, x86: Fix 32bit memcpy for LTO asmlinkage Make __stack_chk_failed and memcmp visible asmlinkage: Mark rwsem functions that can be called from assembler asmlinkage asmlinkage: Make main_extable_sort_needed visible asmlinkage, mutex: Mark __visible asmlinkage: Make trace_hardirq visible ...
2014-03-21KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIPPaolo Bonzini1-1/+14
After the previous patches, an interrupt whose bit is set in the IRR register will never be in the LAPIC's IRR and has never been injected on the migration source. So inject it on the destination. This fixes migration of Windows guests without HPET (they use the RTC to trigger the scheduler tick, and lose it after migration). Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-21KVM: ioapic: extract body of kvm_ioapic_set_irqPaolo Bonzini1-24/+50
We will reuse it to process a nonzero IRR that is passed to KVM_SET_IRQCHIP. Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-21KVM: ioapic: clear IRR for edge-triggered interrupts at deliveryPaolo Bonzini1-0/+3
This ensures that IRR bits are set in the KVM_GET_IRQCHIP result only if the interrupt is still sitting in the IOAPIC. After the next patches, it avoids spurious reinjection of the interrupt when KVM_SET_IRQCHIP is called. Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-21KVM: ioapic: merge ioapic_deliver into ioapic_servicePaolo Bonzini1-20/+9
Commonize the handling of masking, which was absent for kvm_ioapic_set_irq. Setting remote_irr does not need a separate function either, and merging the two functions avoids confusion. Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-18KVM: eventfd: Fix lock order inversion.Cornelia Huck1-4/+4
When registering a new irqfd, we call its ->poll method to collect any event that might have previously been pending so that we can trigger it. This is done under the kvm->irqfds.lock, which means the eventfd's ctx lock is taken under it. However, if we get a POLLHUP in irqfd_wakeup, we will be called with the ctx lock held before getting the irqfds.lock to deactivate the irqfd, causing lockdep to complain. Calling the ->poll method does not really need the irqfds.lock, so let's just move it after we've given up the irqfds.lock in kvm_irqfd_assign(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-13kvm: x86: ignore ioapic polarityGabriel L. Somlo1-1/+0
Both QEMU and KVM have already accumulated a significant number of optimizations based on the hard-coded assumption that ioapic polarity will always use the ActiveHigh convention, where the logical and physical states of level-triggered irq lines always match (i.e., active(asserted) == high == 1, inactive == low == 0). QEMU guests are expected to follow directions given via ACPI and configure the ioapic with polarity 0 (ActiveHigh). However, even when misbehaving guests (e.g. OS X <= 10.9) set the ioapic polarity to 1 (ActiveLow), QEMU will still use the ActiveHigh signaling convention when interfacing with KVM. This patch modifies KVM to completely ignore ioapic polarity as set by the guest OS, enabling misbehaving guests to work alongside those which comply with the ActiveHigh polarity specified by QEMU's ACPI tables. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gabriel L. Somlo <somlo@cmu.edu> [Move documentation to KVM_IRQ_LINE, add ia64. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-26kvm/vfio: Support for DMA coherent IOMMUsAlex Williamson1-7/+20
VFIO now has support for using the IOMMU_CACHE flag and a mechanism for an external user to test the current operating mode of the IOMMU. Add support for this to the kvm-vfio pseudo device so that we only register noncoherent DMA when necessary. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-26KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loopMichael Mueller1-1/+1
Use the arch specific function kvm_arch_vcpu_runnable() to add a further criterium to identify a suitable vcpu to yield to during undirected yield processing. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-18KVM: Simplify kvm->tlbs_dirty handlingTakuya Yoshikawa1-4/+1
When this was introduced, kvm_flush_remote_tlbs() could be called without holding mmu_lock. It is now acknowledged that the function must be called before releasing mmu_lock, and all callers have already been changed to do so. There is no need to use smp_mb() and cmpxchg() any more. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-14Merge branch 'kvm-master' into kvm-queuePaolo Bonzini2-6/+3
2014-02-14arm64: KVM: Add VGIC device control for arm64Christoffer Dall1-0/+1
This fixes the build breakage introduced by c07a0191ef2de1f9510f12d1f88e3b0b5cd8d66f and adds support for the device control API and save/restore of the VGIC state for ARMv8. The defines were simply missing from the arm64 header files and uaccess.h must be implicitly imported from somewhere else on arm. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-14asmlinkage, kvm: Make kvm_rebooting visibleAndi Kleen1-1/+1
kvm_rebooting is referenced from assembler code, thus needs to be visible. Cc: Gleb Natapov <gleb@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1391845930-28580-1-git-send-email-ak@linux.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-04KVM: async_pf: Add missing call for async page presentDominik Dingel1-1/+1
Commit KVM: async_pf: Provide additional direct page notification missed the call from kvm_check_async_pf_completion to the new introduced function. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-30KVM: async_pf: Allow to wait for outstanding workDominik Dingel1-0/+5
On s390 we are not able to cancel work. Instead we will flush the work and wait for completion. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-30KVM: async_pf: Provide additional direct page notificationDominik Dingel2-2/+22
By setting a Kconfig option, the architecture can control when guest notifications will be presented by the apf backend. There is the default batch mechanism, working as before, where the vcpu thread should pull in this information. Opposite to this, there is now the direct mechanism, that will push the information to the guest. This way s390 can use an already existing architecture interface. Still the vcpu thread should call check_completion to cleanup leftovers. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-30KVM: return an error code in kvm_vm_ioctl_register_coalesced_mmio()Dan Carpenter1-6/+2
If kvm_io_bus_register_dev() fails then it returns success but it should return an error code. I also did a little cleanup like removing an impossible NULL test. Cc: stable@vger.kernel.org Fixes: 2b3c246a682c ('KVM: Make coalesced mmio use a device per zone') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-30KVM: s390: add floating irq controllerJens Freimann1-0/+5
This patch adds a floating irq controller as a kvm_device. It will be necessary for migration of floating interrupts as well as for hardening the reset code by allowing user space to explicitly remove all pending floating interrupts. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds6-91/+617
Pull KVM updates from Paolo Bonzini: "First round of KVM updates for 3.14; PPC parts will come next week. Nothing major here, just bugfixes all over the place. The most interesting part is the ARM guys' virtualized interrupt controller overhaul, which lets userspace get/set the state and thus enables migration of ARM VMs" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits) kvm: make KVM_MMU_AUDIT help text more readable KVM: s390: Fix memory access error detection KVM: nVMX: Update guest activity state field on L2 exits KVM: nVMX: Fix nested_run_pending on activity state HLT KVM: nVMX: Clean up handling of VMX-related MSRs KVM: nVMX: Add tracepoints for nested_vmexit and nested_vmexit_inject KVM: nVMX: Pass vmexit parameters to nested_vmx_vmexit KVM: nVMX: Leave VMX mode on clearing of feature control MSR KVM: VMX: Fix DR6 update on #DB exception KVM: SVM: Fix reading of DR6 KVM: x86: Sync DR7 on KVM_SET_DEBUGREGS add support for Hyper-V reference time counter KVM: remove useless write to vcpu->hv_clock.tsc_timestamp KVM: x86: fix tsc catchup issue with tsc scaling KVM: x86: limit PIT timer frequency KVM: x86: handle invalid root_hpa everywhere kvm: Provide kvm_vcpu_eligible_for_directed_yield() stub kvm: vfio: silence GCC warning KVM: ARM: Remove duplicate include arm/arm64: KVM: relax the requirements of VMA alignment for THP ...
2014-01-15kvm: Provide kvm_vcpu_eligible_for_directed_yield() stubScott Wood1-2/+4
Commit 7940876e1330671708186ac3386aa521ffb5c182 ("kvm: make local functions static") broke KVM PPC builds due to removing (rather than moving) the stub version of kvm_vcpu_eligible_for_directed_yield(). This patch reintroduces it. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Alexander Graf <agraf@suse.de> [Move the #ifdef inside the function. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-15kvm: vfio: silence GCC warningPaul Bolle1-3/+3
Building vfio.o triggers a GCC warning (when building for 32 bits x86): arch/x86/kvm/../../../virt/kvm/vfio.c: In function 'kvm_vfio_set_group': arch/x86/kvm/../../../virt/kvm/vfio.c:104:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] void __user *argp = (void __user *)arg; ^ Silence this warning by casting arg to unsigned long. argp's current type, "void __user *", is always casted to "int32_t __user *". So its type might as well be changed to "int32_t __user *". Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-09kvm: remove dead codeStephen Hemminger1-27/+0
The function kvm_io_bus_read_cookie is defined but never used in current in-tree code. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-01-09kvm: make local functions staticStephen Hemminger3-19/+19
Running 'make namespacecheck' found lots of functions that should be declared static, since only used in one file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-12-21KVM: arm-vgic: Support CPU interface reg accessChristoffer Dall1-8/+73
Implement support for the CPU interface register access driven by MMIO address offsets from the CPU interface base address. Useful for user space to support save/restore of the VGIC state. This commit adds support only for the same logic as the current VGIC support, and no more. For example, the active priority registers are handled as RAZ/WI, just like setting priorities on the emulated distributor. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlersChristoffer Dall1-4/+66
Handle MMIO accesses to the two registers which should support both the case where the VMs want to read/write either of these registers and the case where user space reads/writes these registers to do save/restore of the VGIC state. Note that the added complexity compared to simple set/clear enable registers stems from the bookkeping of source cpu ids. It may be possible to change the underlying data structure to simplify the complexity, but since this is not in the critical path at all, this will do. Also note that reading this register from a live guest will not be accurate compared to on hardware, because some state may be living on the CPU LRs and the only way to give a consistent read would be to force stop all the VCPUs and request them to unqueu the LR state onto the distributor. Until we have an actual user of live reading this register, we can live with the difference. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>