From 09f02902eb9cd41d4b88f4a5b93696297b57a3b0 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sun, 3 Mar 2024 11:45:22 +0100 Subject: i2c: i801: Fix using mux_pdev before it's set i801_probe_optional_slaves() is called before i801_add_mux(). This results in mux_pdev being checked before it's set by i801_add_mux(). Fix this by changing the order of the calls. I consider this safe as I see no dependencies. Fixes: 80e56b86b59e ("i2c: i801: Simplify class-based client device instantiation") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Reviewed-by: Andi Shyti Signed-off-by: Andi Shyti --- drivers/i2c/busses/i2c-i801.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 2c36b36d7d51..9a0a77383ca8 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1742,9 +1742,9 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) i801_enable_host_notify(&priv->adapter); - i801_probe_optional_slaves(priv); /* We ignore errors - multiplexing is optional */ i801_add_mux(priv); + i801_probe_optional_slaves(priv); pci_set_drvdata(dev, priv); -- cgit v1.2.3 From ceb013b2d9a2946035de5e1827624edc85ae9484 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Mon, 4 Mar 2024 21:31:06 +0100 Subject: i2c: i801: Avoid potential double call to gpiod_remove_lookup_table If registering the platform device fails, the lookup table is removed in the error path. On module removal we would try to remove the lookup table again. Fix this by setting priv->lookup only if registering the platform device was successful. In addition free the memory allocated for the lookup table in the error path. Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing") Cc: stable@vger.kernel.org Reviewed-by: Andi Shyti Reviewed-by: Linus Walleij Signed-off-by: Heiner Kallweit Signed-off-by: Andi Shyti --- drivers/i2c/busses/i2c-i801.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 9a0a77383ca8..274e987e4cfa 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1416,7 +1416,6 @@ static void i801_add_mux(struct i801_priv *priv) lookup->table[i] = GPIO_LOOKUP(mux_config->gpio_chip, mux_config->gpios[i], "mux", 0); gpiod_add_lookup_table(lookup); - priv->lookup = lookup; /* * Register the mux device, we use PLATFORM_DEVID_NONE here @@ -1430,7 +1429,10 @@ static void i801_add_mux(struct i801_priv *priv) sizeof(struct i2c_mux_gpio_platform_data)); if (IS_ERR(priv->mux_pdev)) { gpiod_remove_lookup_table(lookup); + devm_kfree(dev, lookup); dev_err(dev, "Failed to register i2c-mux-gpio device\n"); + } else { + priv->lookup = lookup; } } -- cgit v1.2.3 From 97fd62e3269d2d47cefd421ffe144f9eafab8315 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Fri, 5 Jan 2024 15:39:35 +0100 Subject: i2c: wmt: Fix an error handling path in wmt_i2c_probe() wmt_i2c_reset_hardware() calls clk_prepare_enable(). So, should an error occur after it, it should be undone by a corresponding clk_disable_unprepare() call, as already done in the remove function. Fixes: 560746eb79d3 ("i2c: vt8500: Add support for I2C bus on Wondermedia SoCs") Signed-off-by: Christophe JAILLET Signed-off-by: Andi Shyti --- drivers/i2c/busses/i2c-wmt.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c index ec2a8da134e5..198afee5233c 100644 --- a/drivers/i2c/busses/i2c-wmt.c +++ b/drivers/i2c/busses/i2c-wmt.c @@ -378,11 +378,15 @@ static int wmt_i2c_probe(struct platform_device *pdev) err = i2c_add_adapter(adap); if (err) - return err; + goto err_disable_clk; platform_set_drvdata(pdev, i2c_dev); return 0; + +err_disable_clk: + clk_disable_unprepare(i2c_dev->clk); + return err; } static void wmt_i2c_remove(struct platform_device *pdev) -- cgit v1.2.3 From ac168d6770aa12ee201c7474e1361810d5fc723a Mon Sep 17 00:00:00 2001 From: Tommy Huang Date: Tue, 5 Mar 2024 09:19:06 +0800 Subject: i2c: aspeed: Fix the dummy irq expected print When the i2c error condition occurred and master state was not idle, the master irq function will goto complete state without any other interrupt handling. It would cause dummy irq expected print. Under this condition, assign the irq_status into irq_handle. For example, when the abnormal start / stop occurred (bit 5) with normal stop status (bit 4) at same time. Then the normal stop status would not be handled and it would cause irq expected print in the aspeed_i2c_bus_irq. ... aspeed-i2c-bus x. i2c-bus: irq handled != irq. Expected 0x00000030, but was 0x00000020 ... Fixes: 3e9efc3299dd ("i2c: aspeed: Handle master/slave combined irq events properly") Cc: Jae Hyun Yoo Signed-off-by: Tommy Huang Signed-off-by: Andi Shyti --- drivers/i2c/busses/i2c-aspeed.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index 5511fd46a65e..ce8c4846b7fa 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -445,6 +445,7 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) irq_status); irq_handled |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS); if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) { + irq_handled = irq_status; bus->cmd_err = ret; bus->master_state = ASPEED_I2C_MASTER_INACTIVE; goto out_complete; -- cgit v1.2.3