From 0192445cb2f7ed1cd7a95a0fc8c7645480baba25 Mon Sep 17 00:00:00 2001 From: Zi Yan Date: Mon, 15 Aug 2022 10:39:59 -0400 Subject: arch: mm: rename FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER This Kconfig option is used by individual arch to set its desired MAX_ORDER. Rename it to reflect its actual use. Link: https://lkml.kernel.org/r/20220815143959.1511278-1-zi.yan@sent.com Acked-by: Mike Rapoport Signed-off-by: Zi Yan Acked-by: Guo Ren [csky] Acked-by: Arnd Bergmann Acked-by: Catalin Marinas [arm64] Acked-by: Huacai Chen [LoongArch] Acked-by: Michael Ellerman [powerpc] Cc: Vineet Gupta Cc: Taichi Sugaya Cc: Neil Armstrong Cc: Qin Jian Cc: Guo Ren Cc: Geert Uytterhoeven Cc: Thomas Bogendoerfer Cc: Dinh Nguyen Cc: Christophe Leroy Cc: Yoshinori Sato Cc: "David S. Miller" Cc: Chris Zankel Cc: Ley Foon Tan Signed-off-by: Andrew Morton --- arch/arc/Kconfig | 2 +- arch/arm/Kconfig | 2 +- arch/arm/configs/imx_v6_v7_defconfig | 2 +- arch/arm/configs/milbeaut_m10v_defconfig | 2 +- arch/arm/configs/oxnas_v6_defconfig | 2 +- arch/arm/configs/pxa_defconfig | 2 +- arch/arm/configs/sama7_defconfig | 2 +- arch/arm/configs/sp7021_defconfig | 2 +- arch/arm64/Kconfig | 2 +- arch/csky/Kconfig | 2 +- arch/ia64/Kconfig | 2 +- arch/ia64/include/asm/sparsemem.h | 6 +++--- arch/loongarch/Kconfig | 2 +- arch/m68k/Kconfig.cpu | 2 +- arch/mips/Kconfig | 2 +- arch/nios2/Kconfig | 2 +- arch/powerpc/Kconfig | 2 +- arch/powerpc/configs/85xx/ge_imp3a_defconfig | 2 +- arch/powerpc/configs/fsl-emb-nonhw.config | 2 +- arch/sh/configs/ecovec24_defconfig | 2 +- arch/sh/mm/Kconfig | 2 +- arch/sparc/Kconfig | 2 +- arch/xtensa/Kconfig | 2 +- include/linux/mmzone.h | 4 ++-- 24 files changed, 27 insertions(+), 27 deletions(-) diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 9e3653253ef2..d9a13ccf89a3 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -554,7 +554,7 @@ config ARC_BUILTIN_DTB_NAME endmenu # "ARC Architecture Configuration" -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int "Maximum zone order" default "12" if ARC_HUGEPAGE_16M default "11" diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 87badeae3181..e6c8ee56ac52 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1434,7 +1434,7 @@ config ARM_MODULE_PLTS Disabling this is usually safe for small single-platform configurations. If unsure, say y. -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int "Maximum zone order" default "12" if SOC_AM33XX default "9" if SA1111 diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 01012537a9b9..fb283059daa0 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -31,7 +31,7 @@ CONFIG_SOC_VF610=y CONFIG_SMP=y CONFIG_ARM_PSCI=y CONFIG_HIGHMEM=y -CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_ARCH_FORCE_MAX_ORDER=14 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig index 58810e98de3d..8620061e19a8 100644 --- a/arch/arm/configs/milbeaut_m10v_defconfig +++ b/arch/arm/configs/milbeaut_m10v_defconfig @@ -26,7 +26,7 @@ CONFIG_THUMB2_KERNEL=y # CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 is not set # CONFIG_ARM_PATCH_IDIV is not set CONFIG_HIGHMEM=y -CONFIG_FORCE_MAX_ZONEORDER=12 +CONFIG_ARCH_FORCE_MAX_ORDER=12 CONFIG_SECCOMP=y CONFIG_KEXEC=y CONFIG_EFI=y diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig index 600f78b363dd..5c163a9d1429 100644 --- a/arch/arm/configs/oxnas_v6_defconfig +++ b/arch/arm/configs/oxnas_v6_defconfig @@ -12,7 +12,7 @@ CONFIG_ARCH_OXNAS=y CONFIG_MACH_OX820=y CONFIG_SMP=y CONFIG_NR_CPUS=16 -CONFIG_FORCE_MAX_ZONEORDER=12 +CONFIG_ARCH_FORCE_MAX_ORDER=12 CONFIG_SECCOMP=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 104a45722799..ce3f4ed50498 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -21,7 +21,7 @@ CONFIG_MACH_AKITA=y CONFIG_MACH_BORZOI=y CONFIG_PXA_SYSTEMS_CPLDS=y CONFIG_AEABI=y -CONFIG_FORCE_MAX_ZONEORDER=9 +CONFIG_ARCH_FORCE_MAX_ORDER=9 CONFIG_CMDLINE="root=/dev/ram0 ro" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig index 0384030d8b25..8b2cf6ddd568 100644 --- a/arch/arm/configs/sama7_defconfig +++ b/arch/arm/configs/sama7_defconfig @@ -19,7 +19,7 @@ CONFIG_ATMEL_CLOCKSOURCE_TCB=y # CONFIG_CACHE_L2X0 is not set # CONFIG_ARM_PATCH_IDIV is not set # CONFIG_CPU_SW_DOMAIN_PAN is not set -CONFIG_FORCE_MAX_ZONEORDER=15 +CONFIG_ARCH_FORCE_MAX_ORDER=15 CONFIG_UACCESS_WITH_MEMCPY=y # CONFIG_ATAGS is not set CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel" diff --git a/arch/arm/configs/sp7021_defconfig b/arch/arm/configs/sp7021_defconfig index 703b9aaa40f0..151ca8c47373 100644 --- a/arch/arm/configs/sp7021_defconfig +++ b/arch/arm/configs/sp7021_defconfig @@ -18,7 +18,7 @@ CONFIG_ARCH_SUNPLUS=y # CONFIG_VDSO is not set CONFIG_SMP=y CONFIG_THUMB2_KERNEL=y -CONFIG_FORCE_MAX_ZONEORDER=12 +CONFIG_ARCH_FORCE_MAX_ORDER=12 CONFIG_VFP=y CONFIG_NEON=y CONFIG_MODULES=y diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 9fb9fff08c94..c5c7d812704c 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1418,7 +1418,7 @@ config XEN help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64. -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int default "14" if ARM64_64K_PAGES default "12" if ARM64_16K_PAGES diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig index 3cbc2dc62baf..adee6ab36862 100644 --- a/arch/csky/Kconfig +++ b/arch/csky/Kconfig @@ -332,7 +332,7 @@ config HIGHMEM select KMAP_LOCAL default y -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int "Maximum zone order" default "11" diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 26ac8ea15a9e..c6e06cdc738f 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -200,7 +200,7 @@ config IA64_CYCLONE Say Y here to enable support for IBM EXA Cyclone time source. If you're unsure, answer N. -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE range 11 17 if !HUGETLB_PAGE default "17" if HUGETLB_PAGE diff --git a/arch/ia64/include/asm/sparsemem.h b/arch/ia64/include/asm/sparsemem.h index 42ed5248fae9..84e8ce387b69 100644 --- a/arch/ia64/include/asm/sparsemem.h +++ b/arch/ia64/include/asm/sparsemem.h @@ -11,10 +11,10 @@ #define SECTION_SIZE_BITS (30) #define MAX_PHYSMEM_BITS (50) -#ifdef CONFIG_FORCE_MAX_ZONEORDER -#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS) +#ifdef CONFIG_ARCH_FORCE_MAX_ORDER +#if ((CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS) #undef SECTION_SIZE_BITS -#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) +#define SECTION_SIZE_BITS (CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT) #endif #endif diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index 26aeb1408e56..3c7a5a54b808 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -370,7 +370,7 @@ config NODES_SHIFT default "6" depends on NUMA -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int "Maximum zone order" range 14 64 if PAGE_SIZE_64KB default "14" if PAGE_SIZE_64KB diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index e0e9e31339c1..3b2f39508524 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -399,7 +399,7 @@ config SINGLE_MEMORY_CHUNK order" to save memory that could be wasted for unused memory map. Say N if not sure. -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int "Maximum zone order" if ADVANCED depends on !SINGLE_MEMORY_CHUNK default "11" diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ec21f8999249..70d28976a40d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2140,7 +2140,7 @@ config PAGE_SIZE_64KB endchoice -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int "Maximum zone order" range 14 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB default "14" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig index 4167f1eb4cd8..a582f72104f3 100644 --- a/arch/nios2/Kconfig +++ b/arch/nios2/Kconfig @@ -44,7 +44,7 @@ menu "Kernel features" source "kernel/Kconfig.hz" -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int "Maximum zone order" range 9 20 default "11" diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 4c466acdc70d..39d71d7701bd 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -845,7 +845,7 @@ config DATA_SHIFT in that case. If PIN_TLB is selected, it must be aligned to 8M as 8M pages will be pinned. -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int "Maximum zone order" range 8 9 if PPC64 && PPC_64K_PAGES default "9" if PPC64 && PPC_64K_PAGES diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig index f29c166998af..e7672c186325 100644 --- a/arch/powerpc/configs/85xx/ge_imp3a_defconfig +++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig @@ -30,7 +30,7 @@ CONFIG_PREEMPT=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y -CONFIG_FORCE_MAX_ZONEORDER=17 +CONFIG_ARCH_FORCE_MAX_ORDER=17 CONFIG_PCI=y CONFIG_PCIEPORTBUS=y CONFIG_PCI_MSI=y diff --git a/arch/powerpc/configs/fsl-emb-nonhw.config b/arch/powerpc/configs/fsl-emb-nonhw.config index f14c6dbd7346..ab8a8c4530d9 100644 --- a/arch/powerpc/configs/fsl-emb-nonhw.config +++ b/arch/powerpc/configs/fsl-emb-nonhw.config @@ -41,7 +41,7 @@ CONFIG_FIXED_PHY=y CONFIG_FONT_8x16=y CONFIG_FONT_8x8=y CONFIG_FONTS=y -CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_ARCH_FORCE_MAX_ORDER=13 CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAME_WARN=1024 CONFIG_FTL=y diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig index e699e2e04128..b52e14ccb450 100644 --- a/arch/sh/configs/ecovec24_defconfig +++ b/arch/sh/configs/ecovec24_defconfig @@ -8,7 +8,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_CPU_SUBTYPE_SH7724=y -CONFIG_FORCE_MAX_ZONEORDER=12 +CONFIG_ARCH_FORCE_MAX_ORDER=12 CONFIG_MEMORY_SIZE=0x10000000 CONFIG_FLATMEM_MANUAL=y CONFIG_SH_ECOVEC=y diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index ba569cfb4368..411fdc0901f7 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -18,7 +18,7 @@ config PAGE_OFFSET default "0x80000000" if MMU default "0x00000000" -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int "Maximum zone order" range 9 64 if PAGE_SIZE_16KB default "9" if PAGE_SIZE_16KB diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 1c852bb530ec..4d3d1af90d52 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -269,7 +269,7 @@ config ARCH_SPARSEMEM_ENABLE config ARCH_SPARSEMEM_DEFAULT def_bool y if SPARC64 -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int "Maximum zone order" default "13" help diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 12ac277282ba..bcb0c5d2abc2 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -771,7 +771,7 @@ config HIGHMEM If unsure, say Y. -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int "Maximum zone order" default "11" help diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 025754b0bc09..fd61347b4b1f 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -24,10 +24,10 @@ #include /* Free memory management - zoned buddy allocator. */ -#ifndef CONFIG_FORCE_MAX_ZONEORDER +#ifndef CONFIG_ARCH_FORCE_MAX_ORDER #define MAX_ORDER 11 #else -#define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER +#define MAX_ORDER CONFIG_ARCH_FORCE_MAX_ORDER #endif #define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1)) -- cgit v1.2.3