From 2338f4315f16b937e924ff679b91bb8c0ab53f25 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Sun, 11 Feb 2024 21:26:55 +0100 Subject: ARM: dts: qcom: ipq4019: add QCA8075 PHY Package nodes Add QCA8075 PHY Package nodes. The PHY nodes that were previously defined never worked and actually never had a driver to correctly setup these PHY. Now that we have a correct driver, correctly add the PHY Package node and set the default value of 300mw for tx driver strength following specification of ipq4019 SoC. Signed-off-by: Christian Marangi Link: https://lore.kernel.org/r/20240211202700.17810-1-ansuelsmth@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 35 ++++++++++++++++++++------------ 1 file changed, 22 insertions(+), 13 deletions(-) diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi index 681cb3fc8085..b198e2af5158 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi @@ -598,24 +598,33 @@ reg = <0x90000 0x64>; status = "disabled"; - ethphy0: ethernet-phy@0 { + ethernet-phy-package@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,qca8075-package"; reg = <0>; - }; - ethphy1: ethernet-phy@1 { - reg = <1>; - }; + qcom,tx-drive-strength-milliwatt = <300>; - ethphy2: ethernet-phy@2 { - reg = <2>; - }; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; - ethphy3: ethernet-phy@3 { - reg = <3>; - }; + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + + ethphy3: ethernet-phy@3 { + reg = <3>; + }; - ethphy4: ethernet-phy@4 { - reg = <4>; + ethphy4: ethernet-phy@4 { + reg = <4>; + }; }; }; -- cgit v1.2.3