From bb57768215fb6b557a1ef95a3d87b011efe2e267 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Tue, 2 Jun 2020 22:26:38 +0200 Subject: mt76: add missing lock configuring coverage class Coverage class callback can potentially run in parallel with other routines (e.g. mt7615_set_channel) that configures timing registers. Run coverage class callback holding mt76 mutex Signed-off-by: Lorenzo Bianconi Signed-off-by: Felix Fietkau --- drivers/net/wireless/mediatek/mt76/mt7603/main.c | 2 ++ drivers/net/wireless/mediatek/mt76/mt7615/main.c | 3 +++ drivers/net/wireless/mediatek/mt76/mt7915/main.c | 3 +++ 3 files changed, 8 insertions(+) diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/main.c b/drivers/net/wireless/mediatek/mt76/mt7603/main.c index 26cb711b465f..83dfa6da4761 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7603/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7603/main.c @@ -642,8 +642,10 @@ mt7603_set_coverage_class(struct ieee80211_hw *hw, s16 coverage_class) { struct mt7603_dev *dev = hw->priv; + mutex_lock(&dev->mt76.mutex); dev->coverage_class = max_t(s16, coverage_class, 0); mt7603_mac_set_timing(dev); + mutex_unlock(&dev->mt76.mutex); } static void mt7603_tx(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c index c26f99b368d9..52d6544698fe 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c @@ -735,9 +735,12 @@ static void mt7615_set_coverage_class(struct ieee80211_hw *hw, s16 coverage_class) { struct mt7615_phy *phy = mt7615_hw_phy(hw); + struct mt7615_dev *dev = phy->dev; + mutex_lock(&dev->mt76.mutex); phy->coverage_class = max_t(s16, coverage_class, 0); mt7615_mac_set_timing(phy); + mutex_unlock(&dev->mt76.mutex); } static int diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c index 0575c259f245..05b5650c56c8 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c @@ -716,9 +716,12 @@ static void mt7915_set_coverage_class(struct ieee80211_hw *hw, s16 coverage_class) { struct mt7915_phy *phy = mt7915_hw_phy(hw); + struct mt7915_dev *dev = phy->dev; + mutex_lock(&dev->mt76.mutex); phy->coverage_class = max_t(s16, coverage_class, 0); mt7915_mac_set_timing(phy); + mutex_unlock(&dev->mt76.mutex); } static int -- cgit v1.2.3 From d941f47caa386931c3b598ad1b43d5ddd65869aa Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sat, 30 May 2020 23:51:27 +0200 Subject: mt76: mt7615: fix lmac queue debugsfs entry acs and wmm index are swapped in mt7615_queues_acq respect to the hw design Signed-off-by: Lorenzo Bianconi Signed-off-by: Felix Fietkau --- drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c index fd3ef483a87c..d06afcf46d67 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c @@ -234,10 +234,11 @@ mt7615_queues_acq(struct seq_file *s, void *data) int i; for (i = 0; i < 16; i++) { - int j, acs = i / 4, index = i % 4; + int j, wmm_idx = i % MT7615_MAX_WMM_SETS; + int acs = i / MT7615_MAX_WMM_SETS; u32 ctrl, val, qlen = 0; - val = mt76_rr(dev, MT_PLE_AC_QEMPTY(acs, index)); + val = mt76_rr(dev, MT_PLE_AC_QEMPTY(acs, wmm_idx)); ctrl = BIT(31) | BIT(15) | (acs << 8); for (j = 0; j < 32; j++) { @@ -245,11 +246,11 @@ mt7615_queues_acq(struct seq_file *s, void *data) continue; mt76_wr(dev, MT_PLE_FL_Q0_CTRL, - ctrl | (j + (index << 5))); + ctrl | (j + (wmm_idx << 5))); qlen += mt76_get_field(dev, MT_PLE_FL_Q3_CTRL, GENMASK(11, 0)); } - seq_printf(s, "AC%d%d: queued=%d\n", acs, index, qlen); + seq_printf(s, "AC%d%d: queued=%d\n", wmm_idx, acs, qlen); } return 0; -- cgit v1.2.3 From a07292ee144b1c4f4269871bb138d16cf5dc603c Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 31 May 2020 00:32:04 +0200 Subject: mt76: mt7615: fix hw queue mapping mt7622/mt7663 chipsets rely on a fixed reverse queue map order respect to mac80211 one: - q(0): IEEE80211_AC_BK - q(1): IEEE80211_AC_BE - q(2): IEEE80211_AC_VI - q(3): IEEE80211_AC_VO Fixes: cdad4874057d ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Co-developed-by: Sean Wang Signed-off-by: Sean Wang Co-developed-by: Ryder Lee Signed-off-by: Ryder Lee Signed-off-by: Lorenzo Bianconi Signed-off-by: Felix Fietkau --- drivers/net/wireless/mediatek/mt76/mt7615/dma.c | 8 +++--- drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 2 +- drivers/net/wireless/mediatek/mt76/mt7615/mac.h | 15 ----------- drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 + drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h | 30 ++++++++++++++++++++++ drivers/net/wireless/mediatek/mt76/usb.c | 17 ++++++------ 6 files changed, 45 insertions(+), 28 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/dma.c b/drivers/net/wireless/mediatek/mt76/mt7615/dma.c index 5a124610d4af..83fdcf5db3c7 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/dma.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/dma.c @@ -36,10 +36,10 @@ static int mt7622_init_tx_queues_multi(struct mt7615_dev *dev) { static const u8 wmm_queue_map[] = { - MT7622_TXQ_AC0, - MT7622_TXQ_AC1, - MT7622_TXQ_AC2, - MT7622_TXQ_AC3, + [IEEE80211_AC_BK] = MT7622_TXQ_AC0, + [IEEE80211_AC_BE] = MT7622_TXQ_AC1, + [IEEE80211_AC_VI] = MT7622_TXQ_AC2, + [IEEE80211_AC_VO] = MT7622_TXQ_AC3, }; int ret; int i; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c index 9f1c6ca7a665..5990355bc731 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c @@ -528,7 +528,7 @@ int mt7615_mac_write_txwi(struct mt7615_dev *dev, __le32 *txwi, if (ieee80211_is_data(fc) || ieee80211_is_bufferable_mmpdu(fc)) { q_idx = wmm_idx * MT7615_MAX_WMM_SETS + - skb_get_queue_mapping(skb); + mt7615_lmac_mapping(dev, skb_get_queue_mapping(skb)); p_fmt = is_usb ? MT_TX_TYPE_SF : MT_TX_TYPE_CT; } else if (beacon) { if (ext_phy) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.h b/drivers/net/wireless/mediatek/mt76/mt7615/mac.h index f0d4b29a52a2..81608ab656b8 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.h +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.h @@ -124,21 +124,6 @@ enum tx_pkt_type { MT_TX_TYPE_FW, }; -enum tx_pkt_queue_idx { - MT_LMAC_AC00, - MT_LMAC_AC01, - MT_LMAC_AC02, - MT_LMAC_AC03, - MT_LMAC_ALTX0 = 0x10, - MT_LMAC_BMC0, - MT_LMAC_BCN0, - MT_LMAC_PSMP0, - MT_LMAC_ALTX1, - MT_LMAC_BMC1, - MT_LMAC_BCN1, - MT_LMAC_PSMP1, -}; - enum tx_port_idx { MT_TX_PORT_IDX_LMAC, MT_TX_PORT_IDX_MCU diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c index 52d6544698fe..beaca8127680 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c @@ -397,6 +397,7 @@ mt7615_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, struct mt7615_vif *mvif = (struct mt7615_vif *)vif->drv_priv; struct mt7615_dev *dev = mt7615_hw_dev(hw); + queue = mt7615_lmac_mapping(dev, queue); queue += mvif->wmm_idx * MT7615_MAX_WMM_SETS; return mt7615_mcu_set_wmm(dev, queue, params); diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h index d6176d316bee..3e7d51bf42a4 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h @@ -282,6 +282,21 @@ struct mt7615_dev { struct list_head wd_head; }; +enum tx_pkt_queue_idx { + MT_LMAC_AC00, + MT_LMAC_AC01, + MT_LMAC_AC02, + MT_LMAC_AC03, + MT_LMAC_ALTX0 = 0x10, + MT_LMAC_BMC0, + MT_LMAC_BCN0, + MT_LMAC_PSMP0, + MT_LMAC_ALTX1, + MT_LMAC_BMC1, + MT_LMAC_BCN1, + MT_LMAC_PSMP1, +}; + enum { HW_BSSID_0 = 0x0, HW_BSSID_1, @@ -447,6 +462,21 @@ static inline u16 mt7615_wtbl_size(struct mt7615_dev *dev) return MT7615_WTBL_SIZE; } +static inline u8 mt7615_lmac_mapping(struct mt7615_dev *dev, u8 ac) +{ + static const u8 lmac_queue_map[] = { + [IEEE80211_AC_BK] = MT_LMAC_AC00, + [IEEE80211_AC_BE] = MT_LMAC_AC01, + [IEEE80211_AC_VI] = MT_LMAC_AC02, + [IEEE80211_AC_VO] = MT_LMAC_AC03, + }; + + if (WARN_ON_ONCE(ac >= ARRAY_SIZE(lmac_queue_map))) + return MT_LMAC_AC01; /* BE */ + + return lmac_queue_map[ac]; +} + void mt7615_dma_reset(struct mt7615_dev *dev); void mt7615_scan_work(struct work_struct *work); void mt7615_roc_work(struct work_struct *work); diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c index fb97ea25b4d4..27abcdb61a06 100644 --- a/drivers/net/wireless/mediatek/mt76/usb.c +++ b/drivers/net/wireless/mediatek/mt76/usb.c @@ -1010,17 +1010,18 @@ static void mt76u_tx_kick(struct mt76_dev *dev, struct mt76_queue *q) static u8 mt76u_ac_to_hwq(struct mt76_dev *dev, u8 ac) { if (mt76_chip(dev) == 0x7663) { - static const u8 wmm_queue_map[] = { - [IEEE80211_AC_VO] = 0, - [IEEE80211_AC_VI] = 1, - [IEEE80211_AC_BE] = 2, - [IEEE80211_AC_BK] = 4, + static const u8 lmac_queue_map[] = { + /* ac to lmac mapping */ + [IEEE80211_AC_BK] = 0, + [IEEE80211_AC_BE] = 1, + [IEEE80211_AC_VI] = 2, + [IEEE80211_AC_VO] = 4, }; - if (WARN_ON(ac >= ARRAY_SIZE(wmm_queue_map))) - return 2; /* BE */ + if (WARN_ON(ac >= ARRAY_SIZE(lmac_queue_map))) + return 1; /* BE */ - return wmm_queue_map[ac]; + return lmac_queue_map[ac]; } return mt76_ac_to_hwq(ac); -- cgit v1.2.3 From 7f88314321e20744114bc596b6528bb9d57ff46f Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Mon, 1 Jun 2020 09:45:33 +0200 Subject: mt76: overwrite qid for non-bufferable mgmt frames Overwrite hw queue id for non-bufferable management frames if the hw support always txq (altxq) in order to be in sync with mac txwi code Fixes: cdad4874057d ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Suggested-by: Felix Fietkau Tested-by: Sean Wang Signed-off-by: Lorenzo Bianconi Signed-off-by: Felix Fietkau --- drivers/net/wireless/mediatek/mt76/mt76.h | 1 + drivers/net/wireless/mediatek/mt76/mt7615/dma.c | 1 + drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 20 +++++++------------- drivers/net/wireless/mediatek/mt76/mt7615/mmio.c | 2 +- drivers/net/wireless/mediatek/mt76/mt7615/usb.c | 2 +- drivers/net/wireless/mediatek/mt76/tx.c | 7 +++++++ 6 files changed, 18 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h index dfe625a53c63..3d7db6ffb599 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76.h +++ b/drivers/net/wireless/mediatek/mt76/mt76.h @@ -301,6 +301,7 @@ struct mt76_hw_cap { #define MT_DRV_TX_ALIGNED4_SKBS BIT(1) #define MT_DRV_SW_RX_AIRTIME BIT(2) #define MT_DRV_RX_DMA_HDR BIT(3) +#define MT_DRV_HW_MGMT_TXQ BIT(4) struct mt76_driver_ops { u32 drv_flags; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/dma.c b/drivers/net/wireless/mediatek/mt76/mt7615/dma.c index 83fdcf5db3c7..e5a965df899a 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/dma.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/dma.c @@ -100,6 +100,7 @@ mt7615_tx_cleanup(struct mt7615_dev *dev) int i; mt76_queue_tx_cleanup(dev, MT_TXQ_MCU, false); + mt76_queue_tx_cleanup(dev, MT_TXQ_PSD, false); if (is_mt7615(&dev->mt76)) { mt76_queue_tx_cleanup(dev, MT_TXQ_BE, false); } else { diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c index 5990355bc731..d97315ec7265 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c @@ -526,22 +526,16 @@ int mt7615_mac_write_txwi(struct mt7615_dev *dev, __le32 *txwi, fc_type = (le16_to_cpu(fc) & IEEE80211_FCTL_FTYPE) >> 2; fc_stype = (le16_to_cpu(fc) & IEEE80211_FCTL_STYPE) >> 4; - if (ieee80211_is_data(fc) || ieee80211_is_bufferable_mmpdu(fc)) { - q_idx = wmm_idx * MT7615_MAX_WMM_SETS + - mt7615_lmac_mapping(dev, skb_get_queue_mapping(skb)); - p_fmt = is_usb ? MT_TX_TYPE_SF : MT_TX_TYPE_CT; - } else if (beacon) { - if (ext_phy) - q_idx = MT_LMAC_BCN1; - else - q_idx = MT_LMAC_BCN0; + if (beacon) { p_fmt = MT_TX_TYPE_FW; + q_idx = ext_phy ? MT_LMAC_BCN1 : MT_LMAC_BCN0; + } else if (skb_get_queue_mapping(skb) >= MT_TXQ_PSD) { + p_fmt = is_usb ? MT_TX_TYPE_SF : MT_TX_TYPE_CT; + q_idx = ext_phy ? MT_LMAC_ALTX1 : MT_LMAC_ALTX0; } else { - if (ext_phy) - q_idx = MT_LMAC_ALTX1; - else - q_idx = MT_LMAC_ALTX0; p_fmt = is_usb ? MT_TX_TYPE_SF : MT_TX_TYPE_CT; + q_idx = wmm_idx * MT7615_MAX_WMM_SETS + + mt7615_lmac_mapping(dev, skb_get_queue_mapping(skb)); } val = FIELD_PREP(MT_TXD0_TX_BYTES, skb->len + sz_txd) | diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mmio.c b/drivers/net/wireless/mediatek/mt76/mt7615/mmio.c index e670393506f0..2e99845b9c96 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mmio.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mmio.c @@ -146,7 +146,7 @@ int mt7615_mmio_probe(struct device *pdev, void __iomem *mem_base, static const struct mt76_driver_ops drv_ops = { /* txwi_size = txd size + txp size */ .txwi_size = MT_TXD_SIZE + sizeof(struct mt7615_txp_common), - .drv_flags = MT_DRV_TXWI_NO_FREE, + .drv_flags = MT_DRV_TXWI_NO_FREE | MT_DRV_HW_MGMT_TXQ, .survey_flags = SURVEY_INFO_TIME_TX | SURVEY_INFO_TIME_RX | SURVEY_INFO_TIME_BSS_RX, diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/usb.c b/drivers/net/wireless/mediatek/mt76/mt7615/usb.c index a50077eb24d7..f5dc1b828518 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/usb.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/usb.c @@ -270,7 +270,7 @@ static int mt7663u_probe(struct usb_interface *usb_intf, { static const struct mt76_driver_ops drv_ops = { .txwi_size = MT_USB_TXD_SIZE, - .drv_flags = MT_DRV_RX_DMA_HDR, + .drv_flags = MT_DRV_RX_DMA_HDR | MT_DRV_HW_MGMT_TXQ, .tx_prepare_skb = mt7663u_tx_prepare_skb, .tx_complete_skb = mt7663u_tx_complete_skb, .tx_status_data = mt7663u_tx_status_data, diff --git a/drivers/net/wireless/mediatek/mt76/tx.c b/drivers/net/wireless/mediatek/mt76/tx.c index fca38ea2441f..f10c98aa883c 100644 --- a/drivers/net/wireless/mediatek/mt76/tx.c +++ b/drivers/net/wireless/mediatek/mt76/tx.c @@ -264,6 +264,13 @@ mt76_tx(struct mt76_phy *phy, struct ieee80211_sta *sta, skb_set_queue_mapping(skb, qid); } + if ((dev->drv->drv_flags & MT_DRV_HW_MGMT_TXQ) && + !ieee80211_is_data(hdr->frame_control) && + !ieee80211_is_bufferable_mmpdu(hdr->frame_control)) { + qid = MT_TXQ_PSD; + skb_set_queue_mapping(skb, qid); + } + if (!(wcid->tx_info & MT_WCID_TX_INFO_SET)) ieee80211_get_tx_rates(info->control.vif, sta, skb, info->control.rates, 1); -- cgit v1.2.3 From 3f9c6d38797e9903937b007a341dad0c251765d6 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 17 May 2020 18:29:56 +0100 Subject: iio:health:afe4403 Fix timestamp alignment and prevent data leak. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 32 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes: eec96d1e2d31 ("iio: health: Add driver for the TI AFE4403 heart monitor") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Acked-by: Andrew F. Davis Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/health/afe4403.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/iio/health/afe4403.c b/drivers/iio/health/afe4403.c index e9f87e42ff4f..a3507624b30f 100644 --- a/drivers/iio/health/afe4403.c +++ b/drivers/iio/health/afe4403.c @@ -65,6 +65,7 @@ static const struct reg_field afe4403_reg_fields[] = { * @regulator: Pointer to the regulator for the IC * @trig: IIO trigger for this device * @irq: ADC_RDY line interrupt number + * @buffer: Used to construct data layout to push into IIO buffer. */ struct afe4403_data { struct device *dev; @@ -74,6 +75,8 @@ struct afe4403_data { struct regulator *regulator; struct iio_trigger *trig; int irq; + /* Ensure suitable alignment for timestamp */ + s32 buffer[8] __aligned(8); }; enum afe4403_chan_id { @@ -309,7 +312,6 @@ static irqreturn_t afe4403_trigger_handler(int irq, void *private) struct iio_dev *indio_dev = pf->indio_dev; struct afe4403_data *afe = iio_priv(indio_dev); int ret, bit, i = 0; - s32 buffer[8]; u8 tx[4] = {AFE440X_CONTROL0, 0x0, 0x0, AFE440X_CONTROL0_READ}; u8 rx[3]; @@ -326,7 +328,7 @@ static irqreturn_t afe4403_trigger_handler(int irq, void *private) if (ret) goto err; - buffer[i++] = get_unaligned_be24(&rx[0]); + afe->buffer[i++] = get_unaligned_be24(&rx[0]); } /* Disable reading from the device */ @@ -335,7 +337,8 @@ static irqreturn_t afe4403_trigger_handler(int irq, void *private) if (ret) goto err; - iio_push_to_buffers_with_timestamp(indio_dev, buffer, pf->timestamp); + iio_push_to_buffers_with_timestamp(indio_dev, afe->buffer, + pf->timestamp); err: iio_trigger_notify_done(indio_dev->trig); -- cgit v1.2.3 From f88ecccac4be348bbcc6d056bdbc622a8955c04d Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 17 May 2020 18:29:57 +0100 Subject: iio:health:afe4404 Fix timestamp alignment and prevent data leak. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 40 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes: 87aec56e27ef ("iio: health: Add driver for the TI AFE4404 heart monitor") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Acked-by: Andrew F. Davis Signed-off-by: Jonathan Cameron --- drivers/iio/health/afe4404.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/iio/health/afe4404.c b/drivers/iio/health/afe4404.c index e728bbb21ca8..cebb1fd4d0b1 100644 --- a/drivers/iio/health/afe4404.c +++ b/drivers/iio/health/afe4404.c @@ -83,6 +83,7 @@ static const struct reg_field afe4404_reg_fields[] = { * @regulator: Pointer to the regulator for the IC * @trig: IIO trigger for this device * @irq: ADC_RDY line interrupt number + * @buffer: Used to construct a scan to push to the iio buffer. */ struct afe4404_data { struct device *dev; @@ -91,6 +92,7 @@ struct afe4404_data { struct regulator *regulator; struct iio_trigger *trig; int irq; + s32 buffer[10] __aligned(8); }; enum afe4404_chan_id { @@ -328,17 +330,17 @@ static irqreturn_t afe4404_trigger_handler(int irq, void *private) struct iio_dev *indio_dev = pf->indio_dev; struct afe4404_data *afe = iio_priv(indio_dev); int ret, bit, i = 0; - s32 buffer[10]; for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = regmap_read(afe->regmap, afe4404_channel_values[bit], - &buffer[i++]); + &afe->buffer[i++]); if (ret) goto err; } - iio_push_to_buffers_with_timestamp(indio_dev, buffer, pf->timestamp); + iio_push_to_buffers_with_timestamp(indio_dev, afe->buffer, + pf->timestamp); err: iio_trigger_notify_done(indio_dev->trig); -- cgit v1.2.3 From d7369ae1f4d7cffa7574d15e1f787dcca184c49d Mon Sep 17 00:00:00 2001 From: Chuhong Yuan Date: Thu, 28 May 2020 14:41:21 +0800 Subject: iio: mma8452: Add missed iio_device_unregister() call in mma8452_probe() The function iio_device_register() was called in mma8452_probe(). But the function iio_device_unregister() was not called after a call of the function mma8452_set_freefall_mode() failed. Thus add the missed function call for one error case. Fixes: 1a965d405fc6 ("drivers:iio:accel:mma8452: added cleanup provision in case of failure.") Signed-off-by: Chuhong Yuan Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma8452.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 00e100fc845a..813bca7cfc3e 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1685,10 +1685,13 @@ static int mma8452_probe(struct i2c_client *client, ret = mma8452_set_freefall_mode(data, false); if (ret < 0) - goto buffer_cleanup; + goto unregister_device; return 0; +unregister_device: + iio_device_unregister(indio_dev); + buffer_cleanup: iio_triggered_buffer_cleanup(indio_dev); -- cgit v1.2.3 From 0187294d227dfc42889e1da8f8ce1e44fc25f147 Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Tue, 26 May 2020 18:47:17 +0800 Subject: iio: magnetometer: ak8974: Fix runtime PM imbalance on error When devm_regmap_init_i2c() returns an error code, a pairing runtime PM usage counter decrement is needed to keep the counter balanced. For error paths after ak8974_set_power(), ak8974_detect() and ak8974_reset(), things are the same. However, When iio_triggered_buffer_setup() returns an error code, there will be two PM usgae counter decrements. Signed-off-by: Dinghao Liu Fixes: 7c94a8b2ee8c ("iio: magn: add a driver for AK8974") Reviewed-by: Linus Walleij Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/magnetometer/ak8974.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/iio/magnetometer/ak8974.c b/drivers/iio/magnetometer/ak8974.c index 810fdfd37c88..041c9007bfbe 100644 --- a/drivers/iio/magnetometer/ak8974.c +++ b/drivers/iio/magnetometer/ak8974.c @@ -862,19 +862,21 @@ static int ak8974_probe(struct i2c_client *i2c, ak8974->map = devm_regmap_init_i2c(i2c, &ak8974_regmap_config); if (IS_ERR(ak8974->map)) { dev_err(&i2c->dev, "failed to allocate register map\n"); + pm_runtime_put_noidle(&i2c->dev); + pm_runtime_disable(&i2c->dev); return PTR_ERR(ak8974->map); } ret = ak8974_set_power(ak8974, AK8974_PWR_ON); if (ret) { dev_err(&i2c->dev, "could not power on\n"); - goto power_off; + goto disable_pm; } ret = ak8974_detect(ak8974); if (ret) { dev_err(&i2c->dev, "neither AK8974 nor AMI30x found\n"); - goto power_off; + goto disable_pm; } ret = ak8974_selftest(ak8974); @@ -884,14 +886,9 @@ static int ak8974_probe(struct i2c_client *i2c, ret = ak8974_reset(ak8974); if (ret) { dev_err(&i2c->dev, "AK8974 reset failed\n"); - goto power_off; + goto disable_pm; } - pm_runtime_set_autosuspend_delay(&i2c->dev, - AK8974_AUTOSUSPEND_DELAY); - pm_runtime_use_autosuspend(&i2c->dev); - pm_runtime_put(&i2c->dev); - indio_dev->dev.parent = &i2c->dev; switch (ak8974->variant) { case AK8974_WHOAMI_VALUE_AMI306: @@ -957,6 +954,11 @@ no_irq: goto cleanup_buffer; } + pm_runtime_set_autosuspend_delay(&i2c->dev, + AK8974_AUTOSUSPEND_DELAY); + pm_runtime_use_autosuspend(&i2c->dev); + pm_runtime_put(&i2c->dev); + return 0; cleanup_buffer: @@ -965,7 +967,6 @@ disable_pm: pm_runtime_put_noidle(&i2c->dev); pm_runtime_disable(&i2c->dev); ak8974_set_power(ak8974, AK8974_PWR_OFF); -power_off: regulator_bulk_disable(ARRAY_SIZE(ak8974->regs), ak8974->regs); return ret; -- cgit v1.2.3 From 25f02d3242ab4d16d0cee2dec0d89cedb3747fa9 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Tue, 9 Jun 2020 06:01:16 +0300 Subject: iio: core: add missing IIO_MOD_H2/ETHANOL string identifiers Add missing strings to iio_modifier_names[] for proper modification of channels. Fixes: b170f7d48443d (iio: Add modifiers for ethanol and H2 gases) Signed-off-by: Matt Ranostay Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 1527f01a44f1..352533342702 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -130,6 +130,8 @@ static const char * const iio_modifier_names[] = { [IIO_MOD_PM2P5] = "pm2p5", [IIO_MOD_PM4] = "pm4", [IIO_MOD_PM10] = "pm10", + [IIO_MOD_ETHANOL] = "ethanol", + [IIO_MOD_H2] = "h2", }; /* relies on pairs of these shared then separate */ -- cgit v1.2.3 From 708d98932893cea609386cefdfd190f757f5a61c Mon Sep 17 00:00:00 2001 From: Syed Nayyar Waris Date: Mon, 16 Mar 2020 18:20:06 +0530 Subject: counter: 104-quad-8: Add lock guards - differential encoder Add lock protection from race conditions to 104-quad-8 counter driver for differential encoder status code changes. Mutex lock calls used for protection. Signed-off-by: Syed Nayyar Waris Fixes: 954ab5cc5f3e ("counter: 104-quad-8: Support Differential Encoder Cable Status") Signed-off-by: Jonathan Cameron --- drivers/counter/104-quad-8.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c index aa13708c2bc3..9364dc188f8f 100644 --- a/drivers/counter/104-quad-8.c +++ b/drivers/counter/104-quad-8.c @@ -1274,18 +1274,26 @@ static ssize_t quad8_signal_cable_fault_read(struct counter_device *counter, struct counter_signal *signal, void *private, char *buf) { - const struct quad8_iio *const priv = counter->priv; + struct quad8_iio *const priv = counter->priv; const size_t channel_id = signal->id / 2; - const bool disabled = !(priv->cable_fault_enable & BIT(channel_id)); + bool disabled; unsigned int status; unsigned int fault; - if (disabled) + mutex_lock(&priv->lock); + + disabled = !(priv->cable_fault_enable & BIT(channel_id)); + + if (disabled) { + mutex_unlock(&priv->lock); return -EINVAL; + } /* Logic 0 = cable fault */ status = inb(priv->base + QUAD8_DIFF_ENCODER_CABLE_STATUS); + mutex_unlock(&priv->lock); + /* Mask respective channel and invert logic */ fault = !(status & BIT(channel_id)); @@ -1317,6 +1325,8 @@ static ssize_t quad8_signal_cable_fault_enable_write( if (ret) return ret; + mutex_lock(&priv->lock); + if (enable) priv->cable_fault_enable |= BIT(channel_id); else @@ -1327,6 +1337,8 @@ static ssize_t quad8_signal_cable_fault_enable_write( outb(cable_fault_enable, priv->base + QUAD8_DIFF_ENCODER_CABLE_STATUS); + mutex_unlock(&priv->lock); + return len; } -- cgit v1.2.3 From d5ed76adb926a90fada98f518abc1ab6ef07d28f Mon Sep 17 00:00:00 2001 From: Syed Nayyar Waris Date: Mon, 16 Mar 2020 18:20:46 +0530 Subject: counter: 104-quad-8: Add lock guards - filter clock prescaler Add lock protection from race conditions to the 104-quad-8 counter driver for filter clock prescaler code changes. Mutex calls used for protection. Signed-off-by: Syed Nayyar Waris Fixes: de65d0556343 ("counter: 104-quad-8: Support Filter Clock Prescaler") Signed-off-by: Jonathan Cameron --- drivers/counter/104-quad-8.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c index 9364dc188f8f..d22cfae1b019 100644 --- a/drivers/counter/104-quad-8.c +++ b/drivers/counter/104-quad-8.c @@ -1365,6 +1365,8 @@ static ssize_t quad8_signal_fck_prescaler_write(struct counter_device *counter, if (ret) return ret; + mutex_lock(&priv->lock); + priv->fck_prescaler[channel_id] = prescaler; /* Reset Byte Pointer */ @@ -1375,6 +1377,8 @@ static ssize_t quad8_signal_fck_prescaler_write(struct counter_device *counter, outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_PRESET_PSC, base_offset + 1); + mutex_unlock(&priv->lock); + return len; } -- cgit v1.2.3 From d88de040e1df38414fc1e4380be9d0e997ab4d58 Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Thu, 4 Jun 2020 21:44:44 -0500 Subject: iio: pressure: zpa2326: handle pm_runtime_get_sync failure Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by: Navid Emamdoost Fixes: 03b262f2bbf4 ("iio:pressure: initial zpa2326 barometer support") Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/zpa2326.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c index 37fe851f89af..799a8dc3e248 100644 --- a/drivers/iio/pressure/zpa2326.c +++ b/drivers/iio/pressure/zpa2326.c @@ -665,8 +665,10 @@ static int zpa2326_resume(const struct iio_dev *indio_dev) int err; err = pm_runtime_get_sync(indio_dev->dev.parent); - if (err < 0) + if (err < 0) { + pm_runtime_put(indio_dev->dev.parent); return err; + } if (err > 0) { /* -- cgit v1.2.3 From 43e666acb79f3d355dd89bf20f4d25d3b15da13e Mon Sep 17 00:00:00 2001 From: Federico Ricchiuto Date: Mon, 15 Jun 2020 22:49:11 +0200 Subject: HID: i2c-hid: add Mediacom FlexBook edge13 to descriptor override The Mediacom FlexBook edge13 uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. Signed-off-by: Federico Ricchiuto Signed-off-by: Jiri Kosina --- drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c index ec142bc8c1da..35f3bfc3e6f5 100644 --- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c @@ -373,6 +373,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = { }, .driver_data = (void *)&sipodev_desc }, + { + .ident = "Mediacom FlexBook edge 13", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MEDIACOM"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "FlexBook_edge13-M-FBE13"), + }, + .driver_data = (void *)&sipodev_desc + }, { .ident = "Odys Winbook 13", .matches = { -- cgit v1.2.3 From ca28aff0e1dc7dce9e12a7fd9276b7118ce5e73a Mon Sep 17 00:00:00 2001 From: Sebastian Parschauer Date: Tue, 9 Jun 2020 12:00:53 +0200 Subject: HID: quirks: Always poll Obins Anne Pro 2 keyboard The Obins Anne Pro 2 keyboard (04d9:a293) disconnects after a few minutes of inactivity when using it wired and typing does not result in any input events any more. This is a common firmware flaw. So add the ALWAYS_POLL quirk for this device. GitHub user Dietrich Moerman (dietrichm) tested the quirk and requested my help in my project https://github.com/sriemer/fix-linux-mouse issue 22 to provide this patch. Link: https://www.reddit.com/r/AnnePro/comments/gruzcb/anne_pro_2_linux_cant_type_after_inactivity/ Signed-off-by: Sebastian Parschauer Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 874fc3791f3b..ba6c49179e31 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -618,6 +618,7 @@ #define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081 0xa081 #define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A0C2 0xa0c2 #define USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A096 0xa096 +#define USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A293 0xa293 #define USB_VENDOR_ID_IMATION 0x0718 #define USB_DEVICE_ID_DISC_STAKKA 0xd000 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index ca8b5c261c7c..78092407c9b2 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -88,6 +88,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING), HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING), HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A096), HID_QUIRK_NO_INIT_REPORTS }, + { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A293), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0A4A), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0B4A), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL }, -- cgit v1.2.3 From aa3c439c144f0a465ed1f28f11c772886fb02b35 Mon Sep 17 00:00:00 2001 From: Caiyuan Xie Date: Fri, 22 May 2020 05:06:10 -0400 Subject: HID: alps: support devices with report id 2 Add support for devices which that have reports with id == 2 Signed-off-by: Caiyuan Xie Signed-off-by: Jiri Kosina --- drivers/hid/hid-alps.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c index b2ad319a74b9..d33f5abc8f64 100644 --- a/drivers/hid/hid-alps.c +++ b/drivers/hid/hid-alps.c @@ -25,6 +25,7 @@ #define U1_MOUSE_REPORT_ID 0x01 /* Mouse data ReportID */ #define U1_ABSOLUTE_REPORT_ID 0x03 /* Absolute data ReportID */ +#define U1_ABSOLUTE_REPORT_ID_SECD 0x02 /* FW-PTP Absolute data ReportID */ #define U1_FEATURE_REPORT_ID 0x05 /* Feature ReportID */ #define U1_SP_ABSOLUTE_REPORT_ID 0x06 /* Feature ReportID */ @@ -368,6 +369,7 @@ static int u1_raw_event(struct alps_dev *hdata, u8 *data, int size) case U1_FEATURE_REPORT_ID: break; case U1_ABSOLUTE_REPORT_ID: + case U1_ABSOLUTE_REPORT_ID_SECD: for (i = 0; i < hdata->max_fingers; i++) { u8 *contact = &data[i * 5]; -- cgit v1.2.3 From 6363d2065cd399cf9d6dc9d08c437f8658831100 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 24 May 2020 16:51:34 -0700 Subject: HID: magicmouse: do not set up autorepeat Neither the trackpad, nor the mouse want input core to generate autorepeat events for their buttons, so let's reset the bit (as hid-input sets it for these devices based on the usage vendor code). Cc: stable@vger.kernel.org Reported-by: Yariv Tested-by: Yariv Signed-off-by: Dmitry Torokhov Signed-off-by: Jiri Kosina --- drivers/hid/hid-magicmouse.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 34138667f8af..abd86903875f 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -535,6 +535,12 @@ static int magicmouse_setup_input(struct input_dev *input, struct hid_device *hd __set_bit(MSC_RAW, input->mscbit); } + /* + * hid-input may mark device as using autorepeat, but neither + * the trackpad, nor the mouse actually want it. + */ + __clear_bit(EV_REP, input->evbit); + return 0; } -- cgit v1.2.3 From 9f2f3ce3daed229eecf647acac44defbdee1f7c0 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 27 May 2020 09:53:57 +0300 Subject: dmaengine: ti: k3-udma: Use correct node to read "ti,udma-atype" The "ti,udma-atype" property is expected in the UDMA node and not in the parent navss node. Fixes: 0ebcf1a274c5 ("dmaengine: ti: k3-udma: Implement support for atype (for virtualization)") Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200527065357.30791-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul --- drivers/dma/ti/k3-udma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index 945b7c604f91..5b0e03c0392a 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -3593,7 +3593,7 @@ static int udma_probe(struct platform_device *pdev) return ret; } - ret = of_property_read_u32(navss_node, "ti,udma-atype", &ud->atype); + ret = of_property_read_u32(dev->of_node, "ti,udma-atype", &ud->atype); if (!ret && ud->atype > 2) { dev_err(dev, "Invalid atype: %u\n", ud->atype); return -EINVAL; -- cgit v1.2.3 From 5a9377cc7421b59b13c9b90b8dc0aca332a1c958 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 27 May 2020 10:06:11 +0300 Subject: dmaengine: ti: k3-udma: Fix cleanup code for alloc_chan_resources Some of the earlier errors should be sent to the error cleanup path to make sure that the uchan struct is reset, the dma_pool (if allocated) is released and memcpy channel pairs are released in a correct way. Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200527070612.636-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul --- drivers/dma/ti/k3-udma.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index 5b0e03c0392a..4893b6cbd7a6 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -1753,7 +1753,8 @@ static int udma_alloc_chan_resources(struct dma_chan *chan) dev_err(ud->ddev.dev, "Descriptor pool allocation failed\n"); uc->use_dma_pool = false; - return -ENOMEM; + ret = -ENOMEM; + goto err_cleanup; } } @@ -1773,16 +1774,18 @@ static int udma_alloc_chan_resources(struct dma_chan *chan) ret = udma_get_chan_pair(uc); if (ret) - return ret; + goto err_cleanup; ret = udma_alloc_tx_resources(uc); - if (ret) - return ret; + if (ret) { + udma_put_rchan(uc); + goto err_cleanup; + } ret = udma_alloc_rx_resources(uc); if (ret) { udma_free_tx_resources(uc); - return ret; + goto err_cleanup; } uc->config.src_thread = ud->psil_base + uc->tchan->id; @@ -1800,10 +1803,8 @@ static int udma_alloc_chan_resources(struct dma_chan *chan) uc->id); ret = udma_alloc_tx_resources(uc); - if (ret) { - uc->config.remote_thread_id = -1; - return ret; - } + if (ret) + goto err_cleanup; uc->config.src_thread = ud->psil_base + uc->tchan->id; uc->config.dst_thread = uc->config.remote_thread_id; @@ -1820,10 +1821,8 @@ static int udma_alloc_chan_resources(struct dma_chan *chan) uc->id); ret = udma_alloc_rx_resources(uc); - if (ret) { - uc->config.remote_thread_id = -1; - return ret; - } + if (ret) + goto err_cleanup; uc->config.src_thread = uc->config.remote_thread_id; uc->config.dst_thread = (ud->psil_base + uc->rchan->id) | @@ -1838,7 +1837,9 @@ static int udma_alloc_chan_resources(struct dma_chan *chan) /* Can not happen */ dev_err(uc->ud->dev, "%s: chan%d invalid direction (%u)\n", __func__, uc->id, uc->config.dir); - return -EINVAL; + ret = -EINVAL; + goto err_cleanup; + } /* check if the channel configuration was successful */ @@ -1919,7 +1920,7 @@ err_psi_free: err_res_free: udma_free_tx_resources(uc); udma_free_rx_resources(uc); - +err_cleanup: udma_reset_uchan(uc); if (uc->use_dma_pool) { -- cgit v1.2.3 From b5b0180c2f767e90b4a6a885a0a2abaab6e3d48d Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 27 May 2020 10:06:12 +0300 Subject: dmaengine: ti: k3-udma: Fix the running channel handling in alloc_chan_resources In the unlikely case when the channel is running (RT enabled) during alloc_chan_resources then we should use udma_reset_chan() and not udma_stop() as the later is trying to initiate a teardown on the channel, which is not valid at this point. Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200527070612.636-3-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul --- drivers/dma/ti/k3-udma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index 4893b6cbd7a6..1c7d6dad8eb4 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -1848,7 +1848,7 @@ static int udma_alloc_chan_resources(struct dma_chan *chan) if (udma_is_chan_running(uc)) { dev_warn(ud->dev, "chan%d: is running!\n", uc->id); - udma_stop(uc); + udma_reset_chan(uc, false); if (udma_is_chan_running(uc)) { dev_err(ud->dev, "chan%d: won't stop!\n", uc->id); ret = -EBUSY; -- cgit v1.2.3 From 2d3f53a80e4eed078669853a178ed96d88f74143 Mon Sep 17 00:00:00 2001 From: Rodrigo Rivas Costa Date: Tue, 16 Jun 2020 18:44:18 +0200 Subject: HID: steam: fixes race in handling device list. Using uhid and KASAN this driver crashed because it was getting several connection events where it only expected one. Then the device was added several times to the static device list and it got corrupted. This patch checks if the device is already in the list before adding it. Signed-off-by: Rodrigo Rivas Costa Tested-by: Siarhei Vishniakou Signed-off-by: Jiri Kosina --- drivers/hid/hid-steam.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-steam.c b/drivers/hid/hid-steam.c index 6286204d4c56..a3b151b29bd7 100644 --- a/drivers/hid/hid-steam.c +++ b/drivers/hid/hid-steam.c @@ -526,7 +526,8 @@ static int steam_register(struct steam_device *steam) steam_battery_register(steam); mutex_lock(&steam_devices_lock); - list_add(&steam->list, &steam_devices); + if (list_empty(&steam->list)) + list_add(&steam->list, &steam_devices); mutex_unlock(&steam_devices_lock); } @@ -552,7 +553,7 @@ static void steam_unregister(struct steam_device *steam) hid_info(steam->hdev, "Steam Controller '%s' disconnected", steam->serial_no); mutex_lock(&steam_devices_lock); - list_del(&steam->list); + list_del_init(&steam->list); mutex_unlock(&steam_devices_lock); steam->serial_no[0] = 0; } @@ -738,6 +739,7 @@ static int steam_probe(struct hid_device *hdev, mutex_init(&steam->mutex); steam->quirks = id->driver_data; INIT_WORK(&steam->work_connect, steam_work_connect_cb); + INIT_LIST_HEAD(&steam->list); steam->client_hdev = steam_create_client_hid(hdev); if (IS_ERR(steam->client_hdev)) { -- cgit v1.2.3 From bf6d6e68d2028a2d82f4c106f50ec75cc1e6ef89 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Wed, 17 Jun 2020 11:35:36 -0500 Subject: soundwire: intel: fix memory leak with devm_kasprintf The dais are allocated with devm_kcalloc() but their name isn't resourced managed and never freed. Fix by also using devm_ for the dai names as well. Fixes: c46302ec554c5 ('soundwire: intel: Add audio DAI ops') Signed-off-by: Pierre-Louis Bossart Reviewed-by: Daniel Baluta Reviewed-by: Kai Vehmanen Reviewed-by: Rander Wang Reviewed-by: Guennadi Liakhovetski Reviewed-by: Bard Liao Link: https://lore.kernel.org/r/20200617163536.17401-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul --- drivers/soundwire/intel.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c index 4cfdd074e310..c7422740edd4 100644 --- a/drivers/soundwire/intel.c +++ b/drivers/soundwire/intel.c @@ -930,8 +930,9 @@ static int intel_create_dai(struct sdw_cdns *cdns, /* TODO: Read supported rates/formats from hardware */ for (i = off; i < (off + num); i++) { - dais[i].name = kasprintf(GFP_KERNEL, "SDW%d Pin%d", - cdns->instance, i); + dais[i].name = devm_kasprintf(cdns->dev, GFP_KERNEL, + "SDW%d Pin%d", + cdns->instance, i); if (!dais[i].name) return -ENOMEM; -- cgit v1.2.3 From 5c45d04c5081c1830d674f4d22d4400ea2083afe Mon Sep 17 00:00:00 2001 From: James Hilliard Date: Tue, 16 Jun 2020 16:04:03 -0600 Subject: USB: serial: cypress_m8: enable Simply Automated UPB PIM This is a UPB (Universal Powerline Bus) PIM (Powerline Interface Module) which allows for controlling multiple UPB compatible devices from Linux using the standard serial interface. Based on vendor application source code there are two different models of USB based PIM devices in addition to a number of RS232 based PIM's. The vendor UPB application source contains the following USB ID's: #define USB_PCS_VENDOR_ID 0x04b4 #define USB_PCS_PIM_PRODUCT_ID 0x5500 #define USB_SAI_VENDOR_ID 0x17dd #define USB_SAI_PIM_PRODUCT_ID 0x5500 The first set of ID's correspond to the PIM variant sold by Powerline Control Systems while the second corresponds to the Simply Automated Incorporated PIM. As the product ID for both of these match the default cypress HID->COM RS232 product ID it assumed that they both use an internal variant of this HID->COM RS232 converter hardware. However as the vendor ID for the Simply Automated variant is different we need to also add it to the cypress_M8 driver so that it is properly detected. Signed-off-by: James Hilliard Link: https://lore.kernel.org/r/20200616220403.1807003-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org [ johan: amend VID define entry ] Signed-off-by: Johan Hovold --- drivers/usb/serial/cypress_m8.c | 2 ++ drivers/usb/serial/cypress_m8.h | 3 +++ 2 files changed, 5 insertions(+) diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 216edd5826ca..ecda82198798 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -59,6 +59,7 @@ static const struct usb_device_id id_table_earthmate[] = { static const struct usb_device_id id_table_cyphidcomrs232[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { } /* Terminating entry */ @@ -73,6 +74,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index 35e223751c0e..16b7410ad057 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -25,6 +25,9 @@ #define VENDOR_ID_CYPRESS 0x04b4 #define PRODUCT_ID_CYPHIDCOM 0x5500 +/* Simply Automated HID->COM UPB PIM (using Cypress PID 0x5500) */ +#define VENDOR_ID_SAI 0x17dd + /* FRWD Dongle - a GPS sports watch */ #define VENDOR_ID_FRWD 0x6737 #define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001 -- cgit v1.2.3 From 08d4ef5cc9203a113702f24725f6cf4db476c958 Mon Sep 17 00:00:00 2001 From: Jörgen Storvist Date: Tue, 23 Jun 2020 00:13:59 +0200 Subject: USB: serial: option: add GosunCn GM500 series MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add USB IDs for GosunCn GM500 series cellular modules. RNDIS config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1404 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option MBIM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1405 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim ECM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1406 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: Jörgen Storvist Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 254a8bbeea67..ef52841537dd 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2028,6 +2028,9 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) | RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */ .driver_info = RSVD(6) }, + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.3 From fbb1461ad1d6eacca9beb69a2f3ce1b5398d399b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 3 Apr 2020 11:29:55 +0300 Subject: iwlwifi: mvm: don't call iwl_mvm_free_inactive_queue() under RCU iwl_mvm_free_inactive_queue() will sleep in synchronize_net() under some circumstances, so don't call it under RCU. There doesn't appear to be a need for RCU protection around this particular call. Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20200403112332.0f49448c133d.I17fd308bc4a9491859c9b112f4eb5d2c3fc18d7d@changeid --- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index fee01cbbd3ac..27977992fd7f 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1189,17 +1189,15 @@ static int iwl_mvm_inactivity_check(struct iwl_mvm *mvm, u8 alloc_for_sta) for_each_set_bit(i, &changetid_queues, IWL_MAX_HW_QUEUES) iwl_mvm_change_queue_tid(mvm, i); + rcu_read_unlock(); + if (free_queue >= 0 && alloc_for_sta != IWL_MVM_INVALID_STA) { ret = iwl_mvm_free_inactive_queue(mvm, free_queue, queue_owner, alloc_for_sta); - if (ret) { - rcu_read_unlock(); + if (ret) return ret; - } } - rcu_read_unlock(); - return free_queue; } -- cgit v1.2.3 From ea0cca61d628662e4a1b26c77c7646f9a0257069 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 12 Jun 2020 09:38:00 +0200 Subject: iwlwifi: fix crash in iwl_dbg_tlv_alloc_trigger MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The tlv passed to iwl_dbg_tlv_alloc_trigger comes from a loaded firmware file. The memory can be marked as read-only as firmware could be shared. In anyway, writing to this memory is not expected. So, iwl_dbg_tlv_alloc_trigger can crash now: BUG: unable to handle page fault for address: ffffae2c01bfa794 PF: supervisor write access in kernel mode PF: error_code(0x0003) - permissions violation PGD 107d51067 P4D 107d51067 PUD 107d52067 PMD 659ad2067 PTE 8000000662298161 CPU: 2 PID: 161 Comm: kworker/2:1 Not tainted 5.7.0-3.gad96a07-default #1 openSUSE Tumbleweed (unreleased) RIP: 0010:iwl_dbg_tlv_alloc_trigger+0x25/0x60 [iwlwifi] Code: eb f2 0f 1f 00 66 66 66 66 90 83 7e 04 33 48 89 f8 44 8b 46 10 48 89 f7 76 40 41 8d 50 ff 83 fa 19 77 23 8b 56 20 85 d2 75 07 46 20 ff ff ff ff 4b 8d 14 40 48 c1 e2 04 48 8d b4 10 00 05 00 RSP: 0018:ffffae2c00417ce8 EFLAGS: 00010246 RAX: ffff8f0522334018 RBX: ffff8f0522334018 RCX: ffffffffc0fc26c0 RDX: 0000000000000000 RSI: ffffae2c01bfa774 RDI: ffffae2c01bfa774 RBP: 0000000000000000 R08: 0000000000000004 R09: 0000000000000001 R10: 0000000000000034 R11: ffffae2c01bfa77c R12: ffff8f0522334230 R13: 0000000001000009 R14: ffff8f0523fdbc00 R15: ffff8f051f395800 FS: 0000000000000000(0000) GS:ffff8f0527c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffae2c01bfa794 CR3: 0000000389eba000 CR4: 00000000000006e0 Call Trace: iwl_dbg_tlv_alloc+0x79/0x120 [iwlwifi] iwl_parse_tlv_firmware.isra.0+0x57d/0x1550 [iwlwifi] iwl_req_fw_callback+0x3f8/0x6a0 [iwlwifi] request_firmware_work_func+0x47/0x90 process_one_work+0x1e3/0x3b0 worker_thread+0x46/0x340 kthread+0x115/0x140 ret_from_fork+0x1f/0x40 As can be seen, write bit is not set in the PTE. Read of trig->occurrences succeeds in iwl_dbg_tlv_alloc_trigger, but trig->occurrences = cpu_to_le32(-1); fails there, obviously. This is likely because we (at SUSE) use compressed firmware and that is marked as RO after decompression (see fw_map_paged_buf). Fix it by creating a temporary buffer in case we need to change the memory. Signed-off-by: Jiri Slaby Reported-by: Dieter Nützel Tested-by: Dieter Nützel Cc: Johannes Berg Cc: Emmanuel Grumbach Cc: Luca Coelho Cc: Intel Linux Wireless Cc: Kalle Valo Cc: "David S. Miller" Cc: Jakub Kicinski Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200612073800.27742-1-jslaby@suse.cz --- drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c index 7987a288917b..27116c7d3f4f 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c @@ -271,6 +271,8 @@ static int iwl_dbg_tlv_alloc_trigger(struct iwl_trans *trans, { struct iwl_fw_ini_trigger_tlv *trig = (void *)tlv->data; u32 tp = le32_to_cpu(trig->time_point); + struct iwl_ucode_tlv *dup = NULL; + int ret; if (le32_to_cpu(tlv->length) < sizeof(*trig)) return -EINVAL; @@ -283,10 +285,20 @@ static int iwl_dbg_tlv_alloc_trigger(struct iwl_trans *trans, return -EINVAL; } - if (!le32_to_cpu(trig->occurrences)) + if (!le32_to_cpu(trig->occurrences)) { + dup = kmemdup(tlv, sizeof(*tlv) + le32_to_cpu(tlv->length), + GFP_KERNEL); + if (!dup) + return -ENOMEM; + trig = (void *)dup->data; trig->occurrences = cpu_to_le32(-1); + tlv = dup; + } + + ret = iwl_dbg_tlv_add(tlv, &trans->dbg.time_point[tp].trig_list); + kfree(dup); - return iwl_dbg_tlv_add(tlv, &trans->dbg.time_point[tp].trig_list); + return ret; } static int (*dbg_tlv_alloc[])(struct iwl_trans *trans, -- cgit v1.2.3 From 4ac668a3b8c9d3477a3fe162c1cfeb867dd65de8 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 15 Jun 2020 20:13:41 +0200 Subject: mt76: mt76x02: do not access uninitialized NAPI structs Fixes a crash on MMIO devices when running into the watchdog reset Fixes: d3377b78cec6 ("mt76: add HE phy modes and hardware queue") Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200615181341.81871-1-nbd@nbd.name --- drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c b/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c index cbbe986655fe..5fda6e7b120c 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c @@ -456,8 +456,9 @@ static void mt76x02_watchdog_reset(struct mt76x02_dev *dev) tasklet_disable(&dev->mt76.tx_tasklet); napi_disable(&dev->mt76.tx_napi); - for (i = 0; i < ARRAY_SIZE(dev->mt76.napi); i++) + mt76_for_each_q_rx(&dev->mt76, i) { napi_disable(&dev->mt76.napi[i]); + } mutex_lock(&dev->mt76.mutex); @@ -515,7 +516,7 @@ static void mt76x02_watchdog_reset(struct mt76x02_dev *dev) tasklet_enable(&dev->mt76.pre_tbtt_tasklet); - for (i = 0; i < ARRAY_SIZE(dev->mt76.napi); i++) { + mt76_for_each_q_rx(&dev->mt76, i) { napi_enable(&dev->mt76.napi[i]); napi_schedule(&dev->mt76.napi[i]); } -- cgit v1.2.3 From b1e79d105516fb96c39eb8a780936b87bae8e3e1 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 21 Jun 2020 18:03:38 +0200 Subject: mt76: mt7663u: fix memory leaks in mt7663u_probe Fix the two following memory leaks in mt7663u_probe: 1- if device power-own times out, remove ieee80211 hw device. 2- if mt76u queues allocation fails, remove pending urbs. Fixes: eb99cc95c3b65 ("mt76: mt7615: introduce mt7663u support") Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/e4098f0c8a9ac51997de07f38c2bcdf7042d6db1.1592755166.git.lorenzo@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7615/usb.c | 11 ++++++----- drivers/net/wireless/mediatek/mt76/usb.c | 22 +++++++++++++++++----- 2 files changed, 23 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/usb.c b/drivers/net/wireless/mediatek/mt76/mt7615/usb.c index f5dc1b828518..5be6704770ad 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/usb.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/usb.c @@ -329,25 +329,26 @@ static int mt7663u_probe(struct usb_interface *usb_intf, if (!mt76_poll_msec(dev, MT_CONN_ON_MISC, MT_TOP_MISC2_FW_PWR_ON, FW_STATE_PWR_ON << 1, 500)) { dev_err(dev->mt76.dev, "Timeout for power on\n"); - return -EIO; + ret = -EIO; + goto error; } alloc_queues: ret = mt76u_alloc_mcu_queue(&dev->mt76); if (ret) - goto error; + goto error_free_q; ret = mt76u_alloc_queues(&dev->mt76); if (ret) - goto error; + goto error_free_q; ret = mt7663u_register_device(dev); if (ret) - goto error_freeq; + goto error_free_q; return 0; -error_freeq: +error_free_q: mt76u_queues_deinit(&dev->mt76); error: mt76u_deinit(&dev->mt76); diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c index 27abcdb61a06..87382b2f7443 100644 --- a/drivers/net/wireless/mediatek/mt76/usb.c +++ b/drivers/net/wireless/mediatek/mt76/usb.c @@ -1067,11 +1067,16 @@ static int mt76u_alloc_tx(struct mt76_dev *dev) static void mt76u_free_tx(struct mt76_dev *dev) { - struct mt76_queue *q; - int i, j; + int i; for (i = 0; i < IEEE80211_NUM_ACS; i++) { + struct mt76_queue *q; + int j; + q = dev->q_tx[i].q; + if (!q) + continue; + for (j = 0; j < q->ndesc; j++) usb_free_urb(q->entry[j].urb); } @@ -1079,17 +1084,22 @@ static void mt76u_free_tx(struct mt76_dev *dev) void mt76u_stop_tx(struct mt76_dev *dev) { - struct mt76_queue_entry entry; - struct mt76_queue *q; - int i, j, ret; + int ret; ret = wait_event_timeout(dev->tx_wait, !mt76_has_tx_pending(&dev->phy), HZ / 5); if (!ret) { + struct mt76_queue_entry entry; + struct mt76_queue *q; + int i, j; + dev_err(dev->dev, "timed out waiting for pending tx\n"); for (i = 0; i < IEEE80211_NUM_ACS; i++) { q = dev->q_tx[i].q; + if (!q) + continue; + for (j = 0; j < q->ndesc; j++) usb_kill_urb(q->entry[j].urb); } @@ -1101,6 +1111,8 @@ void mt76u_stop_tx(struct mt76_dev *dev) */ for (i = 0; i < IEEE80211_NUM_ACS; i++) { q = dev->q_tx[i].q; + if (!q) + continue; /* Assure we are in sync with killed tasklet. */ spin_lock_bh(&q->lock); -- cgit v1.2.3 From dc7bd30b97aac8a97eccef0ffe31f6cefb6e2c3e Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 22 Jun 2020 17:07:16 +0200 Subject: mt76: mt7615: fix EEPROM buffer size Avoid adding MT7615_EEPROM_SIZE twice. Rename MT7615_EEPROM_EXTRA_DATA to MT7615_EEPROM_FULL_SIZE, since it already includes MT7615_EEPROM_SIZE Fixes: ad380ad1ebbe ("mt76: mt7615: add support for applying DC offset calibration from EEPROM") Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200622150716.49622-1-nbd@nbd.name --- drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c | 3 +-- drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c index edac37e7847b..22e4eabe6578 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c @@ -72,8 +72,7 @@ static int mt7615_eeprom_load(struct mt7615_dev *dev, u32 addr) { int ret; - ret = mt76_eeprom_init(&dev->mt76, MT7615_EEPROM_SIZE + - MT7615_EEPROM_EXTRA_DATA); + ret = mt76_eeprom_init(&dev->mt76, MT7615_EEPROM_FULL_SIZE); if (ret < 0) return ret; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h index 40fed7adc58a..a024dee10362 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h +++ b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h @@ -17,7 +17,7 @@ #define MT7615_EEPROM_TXDPD_SIZE 216 #define MT7615_EEPROM_TXDPD_COUNT (44 + 3) -#define MT7615_EEPROM_EXTRA_DATA (MT7615_EEPROM_TXDPD_OFFSET + \ +#define MT7615_EEPROM_FULL_SIZE (MT7615_EEPROM_TXDPD_OFFSET + \ MT7615_EEPROM_TXDPD_COUNT * \ MT7615_EEPROM_TXDPD_SIZE) -- cgit v1.2.3 From 5d0136f8e79f8287e6a36780601f0ce797cf11c2 Mon Sep 17 00:00:00 2001 From: Igor Moura Date: Tue, 23 Jun 2020 05:11:11 -0300 Subject: USB: serial: ch341: add new Product ID for CH340 Add PID for CH340 that's found on some ESP8266 dev boards made by LilyGO. The specific device that contains such serial converter can be seen here: https://github.com/LilyGO/LILYGO-T-OI. Apparently, it's a regular CH340, but I've confirmed with others that also bought this board that the PID found on this device (0x7522) differs from other devices with the "same" converter (0x7523). Simply adding its PID to the driver and rebuilding it made it work as expected. Signed-off-by: Igor Moura Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 89675ee29645..8fbaef5c9d69 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -77,6 +77,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x4348, 0x5523) }, + { USB_DEVICE(0x1a86, 0x7522) }, { USB_DEVICE(0x1a86, 0x7523) }, { USB_DEVICE(0x1a86, 0x5523) }, { }, -- cgit v1.2.3 From 0d46f69881c34351b6ec523c31225b90ea89ee20 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sat, 20 Jun 2020 16:46:34 +0200 Subject: regulator: qcom_smd: Fix pmi8994 label s3 was mislabeled as s2. Fix it. Signed-off-by: Konrad Dybcio Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/20200620144639.335093-19-konradybcio@gmail.com Signed-off-by: Mark Brown --- drivers/regulator/qcom_smd-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 53a64d856926..7f5c318c8259 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -821,7 +821,7 @@ static const struct rpm_regulator_data rpm_pm8994_regulators[] = { static const struct rpm_regulator_data rpm_pmi8994_regulators[] = { { "s1", QCOM_SMD_RPM_SMPB, 1, &pmi8994_ftsmps, "vdd_s1" }, { "s2", QCOM_SMD_RPM_SMPB, 2, &pmi8994_hfsmps, "vdd_s2" }, - { "s2", QCOM_SMD_RPM_SMPB, 3, &pmi8994_hfsmps, "vdd_s3" }, + { "s3", QCOM_SMD_RPM_SMPB, 3, &pmi8994_hfsmps, "vdd_s3" }, { "boost-bypass", QCOM_SMD_RPM_BBYB, 1, &pmi8994_bby, "vdd_bst_byp" }, {} }; -- cgit v1.2.3 From 1aea5c139011f7f9431c74f1fe709516f72b437a Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 23 Jun 2020 20:07:29 +0530 Subject: MAINTAINERS: switch dmaengine tree to kernel.org I have switched DMAengine tree to kernel.org now, so update in MAINTAINERS file Signed-off-by: Vinod Koul Link: https://lore.kernel.org/r/20200623143729.781403-1-vkoul@kernel.org Signed-off-by: Vinod Koul --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 68f21d46614c..49d096742d5d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5111,7 +5111,7 @@ M: Vinod Koul L: dmaengine@vger.kernel.org S: Maintained Q: https://patchwork.kernel.org/project/linux-dmaengine/list/ -T: git git://git.infradead.org/users/vkoul/slave-dma.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git F: Documentation/devicetree/bindings/dma/ F: Documentation/driver-api/dmaengine/ F: drivers/dma/ -- cgit v1.2.3 From 2f57b8d57673af2c2caf8c2c7bef01be940a5c2c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 21 Jun 2020 12:57:30 -0300 Subject: dmaengine: imx-sdma: Fix: Remove 'always true' comparison event_id0 is defined as 'unsigned int', so it is always greater or equal to zero. Remove the unneeded comparisons to fix the following W=1 build warning: drivers/dma/imx-sdma.c: In function 'sdma_free_chan_resources': drivers/dma/imx-sdma.c:1334:23: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] 1334 | if (sdmac->event_id0 >= 0) | ^~ drivers/dma/imx-sdma.c: In function 'sdma_config': drivers/dma/imx-sdma.c:1635:23: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] 1635 | if (sdmac->event_id0 >= 0) { | Fixes: 25962e1a7f1d ("dmaengine: imx-sdma: Fix the event id check to include RX event for UART6") Reported-by: kernel test robot Signed-off-by: Fabio Estevam Reviewed-by: Frieder Schrempf Link: https://lore.kernel.org/r/20200621155730.28766-1-festevam@gmail.com Signed-off-by: Vinod Koul --- drivers/dma/imx-sdma.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 91774039ae5d..270992c4fe47 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1331,8 +1331,7 @@ static void sdma_free_chan_resources(struct dma_chan *chan) sdma_channel_synchronize(chan); - if (sdmac->event_id0 >= 0) - sdma_event_disable(sdmac, sdmac->event_id0); + sdma_event_disable(sdmac, sdmac->event_id0); if (sdmac->event_id1) sdma_event_disable(sdmac, sdmac->event_id1); @@ -1632,11 +1631,9 @@ static int sdma_config(struct dma_chan *chan, memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg)); /* Set ENBLn earlier to make sure dma request triggered after that */ - if (sdmac->event_id0 >= 0) { - if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events) - return -EINVAL; - sdma_event_enable(sdmac, sdmac->event_id0); - } + if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events) + return -EINVAL; + sdma_event_enable(sdmac, sdmac->event_id0); if (sdmac->event_id1) { if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events) -- cgit v1.2.3 From 66983bc18fad17d10766650b3685045f6f092d73 Mon Sep 17 00:00:00 2001 From: Nikhil Rao Date: Mon, 22 Jun 2020 13:38:34 -0700 Subject: dmaengine: idxd: fix cdev locking for open and release add the wq lock in cdev open and release call. This fixes race conditions observed in the open and close routines. Fixes: 42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland") Signed-off-by: Nikhil Rao Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/159285824892.64944.2905413694915141834.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul --- drivers/dma/idxd/cdev.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/dma/idxd/cdev.c b/drivers/dma/idxd/cdev.c index ff49847e37a8..cb376cf6a2d2 100644 --- a/drivers/dma/idxd/cdev.c +++ b/drivers/dma/idxd/cdev.c @@ -74,6 +74,7 @@ static int idxd_cdev_open(struct inode *inode, struct file *filp) struct idxd_device *idxd; struct idxd_wq *wq; struct device *dev; + int rc = 0; wq = inode_wq(inode); idxd = wq->idxd; @@ -81,17 +82,27 @@ static int idxd_cdev_open(struct inode *inode, struct file *filp) dev_dbg(dev, "%s called: %d\n", __func__, idxd_wq_refcount(wq)); - if (idxd_wq_refcount(wq) > 0 && wq_dedicated(wq)) - return -EBUSY; - ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; + mutex_lock(&wq->wq_lock); + + if (idxd_wq_refcount(wq) > 0 && wq_dedicated(wq)) { + rc = -EBUSY; + goto failed; + } + ctx->wq = wq; filp->private_data = ctx; idxd_wq_get(wq); + mutex_unlock(&wq->wq_lock); return 0; + + failed: + mutex_unlock(&wq->wq_lock); + kfree(ctx); + return rc; } static int idxd_cdev_release(struct inode *node, struct file *filep) @@ -105,7 +116,9 @@ static int idxd_cdev_release(struct inode *node, struct file *filep) filep->private_data = NULL; kfree(ctx); + mutex_lock(&wq->wq_lock); idxd_wq_put(wq); + mutex_unlock(&wq->wq_lock); return 0; } -- cgit v1.2.3 From d964d5ff68dba21b53368656adec3fb5f50426bb Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 18 Jun 2020 14:40:04 +0300 Subject: dmaengine: ti: k3-udma: Fix delayed_work usage for tx drain workaround INIT_DELAYED_WORK_ONSTACK() must be used with on-stack delayed work, which is not the case here. Use normal delayed_work for the channels instead. Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA") Reported-by: Tomi Valkeinen Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200618114004.6268-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul --- drivers/dma/ti/k3-udma.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index 1c7d6dad8eb4..3aeeafe92fd6 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -1907,8 +1907,6 @@ static int udma_alloc_chan_resources(struct dma_chan *chan) udma_reset_rings(uc); - INIT_DELAYED_WORK_ONSTACK(&uc->tx_drain.work, - udma_check_tx_completion); return 0; err_irq_free: @@ -3020,7 +3018,6 @@ static void udma_free_chan_resources(struct dma_chan *chan) } cancel_delayed_work_sync(&uc->tx_drain.work); - destroy_delayed_work_on_stack(&uc->tx_drain.work); if (uc->irq_num_ring > 0) { free_irq(uc->irq_num_ring, uc); @@ -3712,6 +3709,7 @@ static int udma_probe(struct platform_device *pdev) tasklet_init(&uc->vc.task, udma_vchan_complete, (unsigned long)&uc->vc); init_completion(&uc->teardown_completed); + INIT_DELAYED_WORK(&uc->tx_drain.work, udma_check_tx_completion); } ret = dma_async_device_register(&ud->ddev); -- cgit v1.2.3 From 466257d9968ac79575831250b039dc07566c7b13 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 18 Jun 2020 21:07:33 +0900 Subject: dmaengine: sh: usb-dmac: set tx_result parameters A client driver (renesas_usbhs) assumed that dmaengine_tx_status() could return the residue even if the transfer was completed. However, this was not correct usage [1] and this caused to break getting the residue after the commit 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()") actually. So, this is possible to get wrong received size if the usb controller gets a short packet. For example, g_zero driver causes "bad OUT byte" errors. To use the tx_result from the renesas_usbhs driver when the transfer is completed, set the tx_result parameters. Notes that the renesas_usbhs driver needs to update for it. [1] https://lore.kernel.org/dmaengine/20200616165550.GP2324254@vkoul-mobl/ Reported-by: Hien Dang Fixes: 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()") Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1592482053-19433-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul --- drivers/dma/sh/usb-dmac.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/dma/sh/usb-dmac.c b/drivers/dma/sh/usb-dmac.c index b218a013c260..8f7ceb698226 100644 --- a/drivers/dma/sh/usb-dmac.c +++ b/drivers/dma/sh/usb-dmac.c @@ -586,6 +586,8 @@ static void usb_dmac_isr_transfer_end(struct usb_dmac_chan *chan) desc->residue = usb_dmac_get_current_residue(chan, desc, desc->sg_index - 1); desc->done_cookie = desc->vd.tx.cookie; + desc->vd.tx_result.result = DMA_TRANS_NOERROR; + desc->vd.tx_result.residue = desc->residue; vchan_cookie_complete(&desc->vd); /* Restart the next transfer if this driver has a next desc */ -- cgit v1.2.3 From 1438cde8fe9cb709b569f5829c4c892c0f3f15b3 Mon Sep 17 00:00:00 2001 From: Yu Kuai Date: Thu, 18 Jun 2020 21:01:10 +0800 Subject: dmaengine: ti: k3-udma: add missing put_device() call in of_xudma_dev_get() if of_find_device_by_node() succeed and platform_get_drvdata() failed, of_xudma_dev_get() will return without put_device(), which will leak the memory. Signed-off-by: Yu Kuai Link: https://lore.kernel.org/r/20200618130110.582543-1-yukuai3@huawei.com Signed-off-by: Vinod Koul --- drivers/dma/ti/k3-udma-private.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/ti/k3-udma-private.c b/drivers/dma/ti/k3-udma-private.c index 0b8f3dd6b146..77e8e67d995b 100644 --- a/drivers/dma/ti/k3-udma-private.c +++ b/drivers/dma/ti/k3-udma-private.c @@ -42,6 +42,7 @@ struct udma_dev *of_xudma_dev_get(struct device_node *np, const char *property) ud = platform_get_drvdata(pdev); if (!ud) { pr_debug("UDMA has not been probed\n"); + put_device(&pdev->dev); return ERR_PTR(-EPROBE_DEFER); } -- cgit v1.2.3 From 0b8975bdc0cc5310d48d9bdd871cefebe1f94c99 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 3 Jun 2020 10:27:48 -0700 Subject: dmaengine: idxd: fix hw descriptor fields for delta record Fix the hw descriptor fields for delta record in user exported idxd.h header. Missing the "expected result mask" field. Reported-by: Mona Hossain Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/159120526866.65385.536565786678052944.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul --- include/uapi/linux/idxd.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/uapi/linux/idxd.h b/include/uapi/linux/idxd.h index 1f412fbf561b..e103c1434e4b 100644 --- a/include/uapi/linux/idxd.h +++ b/include/uapi/linux/idxd.h @@ -110,9 +110,12 @@ struct dsa_hw_desc { uint16_t rsvd1; union { uint8_t expected_res; + /* create delta record */ struct { uint64_t delta_addr; uint32_t max_delta_size; + uint32_t delt_rsvd; + uint8_t expected_res_mask; }; uint32_t delta_rec_size; uint64_t dest2; -- cgit v1.2.3 From bfc1d5bf261df81155935aac10b721f4d5a70849 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 11 Jun 2020 14:17:40 +0200 Subject: dmaengine: fsl-edma: Add lockdep assert for exported function Add lockdep assert for an exported function expected to be called under spin lock. Since this function is called in different modules, the lockdep assert will be self-documenting note about need for locking. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Robin Gong Link: https://lore.kernel.org/r/1591877861-28156-1-git-send-email-krzk@kernel.org Signed-off-by: Vinod Koul --- drivers/dma/fsl-edma-common.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c index 5697c3622699..4550818cca4a 100644 --- a/drivers/dma/fsl-edma-common.c +++ b/drivers/dma/fsl-edma-common.c @@ -589,6 +589,8 @@ void fsl_edma_xfer_desc(struct fsl_edma_chan *fsl_chan) { struct virt_dma_desc *vdesc; + lockdep_assert_held(&fsl_chan->vchan.lock); + vdesc = vchan_next_desc(&fsl_chan->vchan); if (!vdesc) return; -- cgit v1.2.3 From f5e5677c420346b4e9788051c2e4d750996c428c Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 11 Jun 2020 14:17:41 +0200 Subject: dmaengine: fsl-edma: Fix NULL pointer exception in fsl_edma_tx_handler NULL pointer exception happens occasionally on serial output initiated by login timeout. This was reproduced only if kernel was built with significant debugging options and EDMA driver is used with serial console. col-vf50 login: root Password: Login timed out after 60 seconds. Unable to handle kernel NULL pointer dereference at virtual address 00000044 Internal error: Oops: 5 [#1] ARM CPU: 0 PID: 157 Comm: login Not tainted 5.7.0-next-20200610-dirty #4 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (fsl_edma_tx_handler) from [<8016eb10>] (__handle_irq_event_percpu+0x64/0x304) (__handle_irq_event_percpu) from [<8016eddc>] (handle_irq_event_percpu+0x2c/0x7c) (handle_irq_event_percpu) from [<8016ee64>] (handle_irq_event+0x38/0x5c) (handle_irq_event) from [<801729e4>] (handle_fasteoi_irq+0xa4/0x160) (handle_fasteoi_irq) from [<8016ddcc>] (generic_handle_irq+0x34/0x44) (generic_handle_irq) from [<8016e40c>] (__handle_domain_irq+0x54/0xa8) (__handle_domain_irq) from [<80508bc8>] (gic_handle_irq+0x4c/0x80) (gic_handle_irq) from [<80100af0>] (__irq_svc+0x70/0x98) Exception stack(0x8459fe80 to 0x8459fec8) fe80: 72286b00 e3359f64 00000001 0000412d a0070013 85c98840 85c98840 a0070013 fea0: 8054e0d4 00000000 00000002 00000000 00000002 8459fed0 8081fbe8 8081fbec fec0: 60070013 ffffffff (__irq_svc) from [<8081fbec>] (_raw_spin_unlock_irqrestore+0x30/0x58) (_raw_spin_unlock_irqrestore) from [<8056cb48>] (uart_flush_buffer+0x88/0xf8) (uart_flush_buffer) from [<80554e60>] (tty_ldisc_hangup+0x38/0x1ac) (tty_ldisc_hangup) from [<8054c7f4>] (__tty_hangup+0x158/0x2bc) (__tty_hangup) from [<80557b90>] (disassociate_ctty.part.1+0x30/0x23c) (disassociate_ctty.part.1) from [<8011fc18>] (do_exit+0x580/0xba0) (do_exit) from [<801214f8>] (do_group_exit+0x3c/0xb4) (do_group_exit) from [<80121580>] (__wake_up_parent+0x0/0x14) Issue looks like race condition between interrupt handler fsl_edma_tx_handler() (called as result of fsl_edma_xfer_desc()) and terminating the transfer with fsl_edma_terminate_all(). The fsl_edma_tx_handler() handles interrupt for a transfer with already freed edesc and idle==true. Fixes: d6be34fbd39b ("dma: Add Freescale eDMA engine driver support") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Robin Gong Cc: Link: https://lore.kernel.org/r/1591877861-28156-2-git-send-email-krzk@kernel.org Signed-off-by: Vinod Koul --- drivers/dma/fsl-edma.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c index eff7ebd8cf35..90bb72af306c 100644 --- a/drivers/dma/fsl-edma.c +++ b/drivers/dma/fsl-edma.c @@ -45,6 +45,13 @@ static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id) fsl_chan = &fsl_edma->chans[ch]; spin_lock(&fsl_chan->vchan.lock); + + if (!fsl_chan->edesc) { + /* terminate_all called before */ + spin_unlock(&fsl_chan->vchan.lock); + continue; + } + if (!fsl_chan->edesc->iscyclic) { list_del(&fsl_chan->edesc->vdesc.node); vchan_cookie_complete(&fsl_chan->edesc->vdesc); -- cgit v1.2.3 From 8995aa3d164ddd9200e6abcf25c449cf5298c858 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 11 Jun 2020 15:21:05 +0200 Subject: dmaengine: mcf-edma: Fix NULL pointer exception in mcf_edma_tx_handler On Toradex Colibri VF50 (Vybrid VF5xx) with fsl-edma driver NULL pointer exception happens occasionally on serial output initiated by login timeout. This was reproduced only if kernel was built with significant debugging options and EDMA driver is used with serial console. Issue looks like a race condition between interrupt handler fsl_edma_tx_handler() (called as a result of fsl_edma_xfer_desc()) and terminating the transfer with fsl_edma_terminate_all(). The fsl_edma_tx_handler() handles interrupt for a transfer with already freed edesc and idle==true. The mcf-edma driver shares design and lot of code with fsl-edma. It looks like being affected by same problem. Fix this pattern the same way as fix for fsl-edma driver. Fixes: e7a3ff92eaf1 ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support") Cc: Signed-off-by: Krzysztof Kozlowski Reviewed-by: Robin Gong Link: https://lore.kernel.org/r/1591881665-25592-1-git-send-email-krzk@kernel.org Signed-off-by: Vinod Koul --- drivers/dma/mcf-edma.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/dma/mcf-edma.c b/drivers/dma/mcf-edma.c index e15bd15a9ef6..e12b754e6398 100644 --- a/drivers/dma/mcf-edma.c +++ b/drivers/dma/mcf-edma.c @@ -35,6 +35,13 @@ static irqreturn_t mcf_edma_tx_handler(int irq, void *dev_id) mcf_chan = &mcf_edma->chans[ch]; spin_lock(&mcf_chan->vchan.lock); + + if (!mcf_chan->edesc) { + /* terminate_all called before */ + spin_unlock(&mcf_chan->vchan.lock); + continue; + } + if (!mcf_chan->edesc->iscyclic) { list_del(&mcf_chan->edesc->vdesc.node); vchan_cookie_complete(&mcf_chan->edesc->vdesc); -- cgit v1.2.3 From a06bb885cf3d812ebfd45c6300e503690a762955 Mon Sep 17 00:00:00 2001 From: David Rheinsberg Date: Fri, 19 Jun 2020 16:57:59 +0200 Subject: MAINTAINERS: update uhid and hid-wiimote entry My last name changed to "Rheinsberg", so update the maintainer entries and adjust the emails while at it. Signed-off-by: David Rheinsberg Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 465210f17948..e1d82d8de7dc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17390,7 +17390,7 @@ F: Documentation/admin-guide/ufs.rst F: fs/ufs/ UHID USERSPACE HID IO DRIVER -M: David Herrmann +M: David Rheinsberg L: linux-input@vger.kernel.org S: Maintained F: drivers/hid/uhid.c @@ -18334,7 +18334,7 @@ S: Maintained F: drivers/rtc/rtc-sd3078.c WIIMOTE HID DRIVER -M: David Herrmann +M: David Rheinsberg L: linux-input@vger.kernel.org S: Maintained F: drivers/hid/hid-wiimote* -- cgit v1.2.3 From a5d81646fa294eed57786a9310b06ca48902adf8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 20 Jun 2020 14:32:29 +0200 Subject: HID: apple: Disable Fn-key key-re-mapping on clone keyboards The Maxxter KB-BT-001 Bluetooth keyboard, which looks somewhat like the Apple Wireless Keyboard, is using the vendor and product IDs (05AC:0239) of the Apple Wireless Keyboard (2009 ANSI version) . But its F1 - F10 keys are marked as sending F1 - F10, not the special functions hid-apple.c maps them too; and since its descriptors do not contain the HID_UP_CUSTOM | 0x0003 usage apple-hid looks for for the Fn-key, apple_setup_input() never gets called, so F1 - F6 are mapped to key-codes which have not been set in the keybit array causing them to not send any events at all. The lack of a usage code matching the Fn key in the clone is actually useful as this allows solving this problem in a generic way. This commits adds a fn_found flag and it adds a input_configured callback which checks if this flag is set once all usages have been mapped. If it is not set, then assume this is a clone and clear the quirks bitmap so that the hid-apple code does not add any special handling to this keyboard. This fixes F1 - F6 not sending anything at all and F7 - F12 sending the wrong codes on the Maxxter KB-BT-001 Bluetooth keyboard and on similar clones. Cc: Joao Moreno Signed-off-by: Hans de Goede Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 359bdfbe3701..e82f604d33e9 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -60,6 +60,7 @@ MODULE_PARM_DESC(swap_fn_leftctrl, "Swap the Fn and left Control keys. " struct apple_sc { unsigned long quirks; unsigned int fn_on; + unsigned int fn_found; DECLARE_BITMAP(pressed_numlock, KEY_CNT); }; @@ -365,12 +366,15 @@ static int apple_input_mapping(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { + struct apple_sc *asc = hid_get_drvdata(hdev); + if (usage->hid == (HID_UP_CUSTOM | 0x0003) || usage->hid == (HID_UP_MSVENDOR | 0x0003) || usage->hid == (HID_UP_HPVENDOR2 | 0x0003)) { /* The fn key on Apple USB keyboards */ set_bit(EV_REP, hi->input->evbit); hid_map_usage_clear(hi, usage, bit, max, EV_KEY, KEY_FN); + asc->fn_found = true; apple_setup_input(hi->input); return 1; } @@ -397,6 +401,19 @@ static int apple_input_mapped(struct hid_device *hdev, struct hid_input *hi, return 0; } +static int apple_input_configured(struct hid_device *hdev, + struct hid_input *hidinput) +{ + struct apple_sc *asc = hid_get_drvdata(hdev); + + if ((asc->quirks & APPLE_HAS_FN) && !asc->fn_found) { + hid_info(hdev, "Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling\n"); + asc->quirks = 0; + } + + return 0; +} + static int apple_probe(struct hid_device *hdev, const struct hid_device_id *id) { @@ -611,6 +628,7 @@ static struct hid_driver apple_driver = { .event = apple_event, .input_mapping = apple_input_mapping, .input_mapped = apple_input_mapped, + .input_configured = apple_input_configured, }; module_hid_driver(apple_driver); -- cgit v1.2.3 From 1ee1369b46de1083238fced60ff718f59de4b8aa Mon Sep 17 00:00:00 2001 From: James Hilliard Date: Tue, 23 Jun 2020 13:24:15 -0600 Subject: HID: quirks: Ignore Simply Automated UPB PIM As this is a cypress HID->COM RS232 style device that is handled by the cypress_M8 driver we also need to add it to the ignore list in hid-quirks. Cc: stable Signed-off-by: James Hilliard Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 2 ++ drivers/hid/hid-quirks.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index ba6c49179e31..6f370e020feb 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -999,6 +999,8 @@ #define USB_DEVICE_ID_ROCCAT_RYOS_MK_PRO 0x3232 #define USB_DEVICE_ID_ROCCAT_SAVU 0x2d5a +#define USB_VENDOR_ID_SAI 0x17dd + #define USB_VENDOR_ID_SAITEK 0x06a3 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17 #define USB_DEVICE_ID_SAITEK_PS1000 0x0621 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 78092407c9b2..934fc0a798d4 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -833,6 +833,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PETZL, USB_DEVICE_ID_PETZL_HEADLAMP) }, { HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) }, { HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SAI, USB_DEVICE_ID_CYPRESS_HIDCOM) }, #if IS_ENABLED(CONFIG_MOUSE_SYNAPTICS_USB) { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_TP) }, { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_INT_TP) }, -- cgit v1.2.3 From 5b78fac4b1ba731cf4177fdbc1e3a4661521bcd0 Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Wed, 24 Jun 2020 14:46:26 +0800 Subject: dmaengine: tegra210-adma: Fix runtime PM imbalance on error pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu Reviewed-by: Jon Hunter Link: https://lore.kernel.org/r/20200624064626.19855-1-dinghao.liu@zju.edu.cn Signed-off-by: Vinod Koul --- drivers/dma/tegra210-adma.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c index db58d7e4f9fe..c5fa2ef74abc 100644 --- a/drivers/dma/tegra210-adma.c +++ b/drivers/dma/tegra210-adma.c @@ -658,6 +658,7 @@ static int tegra_adma_alloc_chan_resources(struct dma_chan *dc) ret = pm_runtime_get_sync(tdc2dev(tdc)); if (ret < 0) { + pm_runtime_put_noidle(tdc2dev(tdc)); free_irq(tdc->irq, tdc); return ret; } @@ -869,8 +870,10 @@ static int tegra_adma_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_noidle(&pdev->dev); goto rpm_disable; + } ret = tegra_adma_init(tdma); if (ret) -- cgit v1.2.3 From 76e242c284521a0129a4c312093fb0ab102b704a Mon Sep 17 00:00:00 2001 From: Dilip Kota Date: Wed, 27 May 2020 18:56:53 +0800 Subject: phy: intel: Fix compilation error on FIELD_PREP usage FIELD_PREP expects constant arguments. Istead of doing FIELD_PREP operation on the arguments of combo_phy_w32_off_mask(), pass the final FIELD_PREP value as an argument. Error reported as: In file included from include/linux/build_bug.h:5, from include/linux/bitfield.h:10, from drivers/phy/intel/phy-intel-combo.c:8: drivers/phy/intel/phy-intel-combo.c: In function 'combo_phy_w32_off_mask': include/linux/bitfield.h:52:28: warning: comparison is always false due to limited range of data type [-Wtype-limits] include/linux/compiler.h:350:38: error: call to '__compiletime_assert_37' declared with attribute error: FIELD_PREP: mask is not constant 94 | __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); | ^~~~~~~~~~~~~~~~ drivers/phy/intel/phy-intel-combo.c:137:13: note: in expansion of macro 'FIELD_PREP' 137 | reg_val |= FIELD_PREP(mask, val); | ^~~~~~~~~~ ../include/linux/compiler.h:392:38: error: call to__compiletime_assert_137 declared with attribute error: BUILD_BUG_ON failed: (((mask) + (1ULL << (__builtin_ffsll(mask) - 1))) & (((mask) + (1ULL << (__builtin_ffsll(mask) - 1))) - 1)) != 0 _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ../include/linux/bitfield.h:94:3: note: in expansion of macro __BF_FIELD_CHECK __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \ ^~~~~~~~~~~~~~~~ ../drivers/phy/intel/phy-intel-combo.c:137:13: note: in expansion of macro FIELD_PREP reg_val |= FIELD_PREP(mask, val); ^~~~~~~~~~ Fixes: ac0a95a3ea78 ("phy: intel: Add driver support for ComboPhy") Reported-by: kbuild test robot Reported-by: Randy Dunlap Signed-off-by: Dilip Kota Acked-by: Randy Dunlap # build-tested Link: https://lore.kernel.org/r/8a309dd3c238efbaa59d1649704255d6f8b6c9c5.1590575358.git.eswara.kota@linux.intel.com Signed-off-by: Vinod Koul --- drivers/phy/intel/phy-intel-combo.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/phy/intel/phy-intel-combo.c b/drivers/phy/intel/phy-intel-combo.c index c2a35be4cdfb..254ea7cba7ca 100644 --- a/drivers/phy/intel/phy-intel-combo.c +++ b/drivers/phy/intel/phy-intel-combo.c @@ -134,7 +134,7 @@ static inline void combo_phy_w32_off_mask(void __iomem *base, unsigned int reg, reg_val = readl(base + reg); reg_val &= ~mask; - reg_val |= FIELD_PREP(mask, val); + reg_val |= val; writel(reg_val, base + reg); } @@ -169,7 +169,7 @@ static int intel_cbphy_pcie_en_pad_refclk(struct intel_cbphy_iphy *iphy) return 0; combo_phy_w32_off_mask(cbphy->app_base, PCIE_PHY_GEN_CTRL, - PCIE_PHY_CLK_PAD, 0); + PCIE_PHY_CLK_PAD, FIELD_PREP(PCIE_PHY_CLK_PAD, 0)); /* Delay for stable clock PLL */ usleep_range(50, 100); @@ -192,7 +192,7 @@ static int intel_cbphy_pcie_dis_pad_refclk(struct intel_cbphy_iphy *iphy) return 0; combo_phy_w32_off_mask(cbphy->app_base, PCIE_PHY_GEN_CTRL, - PCIE_PHY_CLK_PAD, 1); + PCIE_PHY_CLK_PAD, FIELD_PREP(PCIE_PHY_CLK_PAD, 1)); return 0; } @@ -385,7 +385,7 @@ static int intel_cbphy_calibrate(struct phy *phy) /* trigger auto RX adaptation */ combo_phy_w32_off_mask(cr_base, CR_ADDR(PCS_XF_ATE_OVRD_IN_2, id), - ADAPT_REQ_MSK, 3); + ADAPT_REQ_MSK, FIELD_PREP(ADAPT_REQ_MSK, 3)); /* Wait RX adaptation to finish */ ret = readl_poll_timeout(cr_base + CR_ADDR(PCS_XF_RX_ADAPT_ACK, id), val, val & RX_ADAPT_ACK_BIT, 10, 5000); @@ -396,7 +396,7 @@ static int intel_cbphy_calibrate(struct phy *phy) /* Stop RX adaptation */ combo_phy_w32_off_mask(cr_base, CR_ADDR(PCS_XF_ATE_OVRD_IN_2, id), - ADAPT_REQ_MSK, 0); + ADAPT_REQ_MSK, FIELD_PREP(ADAPT_REQ_MSK, 0)); return ret; } -- cgit v1.2.3 From 6153224bef8b218ecf9bf541b6154ff72fc4c54b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 27 May 2020 15:45:06 +0200 Subject: phy: intel: fix enum type mismatch warning clang points out that a local variable is initialized with an enum value of the wrong type: drivers/phy/intel/phy-intel-combo.c:202:34: error: implicit conversion from enumeration type 'enum intel_phy_mode' to different enumeration type 'enum intel_combo_mode' [-Werror,-Wenum-conversion] enum intel_combo_mode cb_mode = PHY_PCIE_MODE; ~~~~~~~ ^~~~~~~~~~~~~ >From reading the code, it seems that this was not only the wrong type, but not even supposed to be a code path that can happen in practice. Change the code to have no default phy mode but instead return an error for invalid input. Fixes: ac0a95a3ea78 ("phy: intel: Add driver support for ComboPhy") Signed-off-by: Arnd Bergmann Reviewed-by: Dilip Kota Reviewed-by: Nathan Chancellor Link: https://lore.kernel.org/r/20200527134518.908624-1-arnd@arndb.de Signed-off-by: Vinod Koul --- drivers/phy/intel/phy-intel-combo.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/phy/intel/phy-intel-combo.c b/drivers/phy/intel/phy-intel-combo.c index 254ea7cba7ca..360b1eb2ebd6 100644 --- a/drivers/phy/intel/phy-intel-combo.c +++ b/drivers/phy/intel/phy-intel-combo.c @@ -199,7 +199,7 @@ static int intel_cbphy_pcie_dis_pad_refclk(struct intel_cbphy_iphy *iphy) static int intel_cbphy_set_mode(struct intel_combo_phy *cbphy) { - enum intel_combo_mode cb_mode = PHY_PCIE_MODE; + enum intel_combo_mode cb_mode; enum aggregated_mode aggr = cbphy->aggr_mode; struct device *dev = cbphy->dev; enum intel_phy_mode mode; @@ -224,6 +224,8 @@ static int intel_cbphy_set_mode(struct intel_combo_phy *cbphy) cb_mode = SATA0_SATA1_MODE; break; + default: + return -EINVAL; } ret = regmap_write(cbphy->hsiocfg, REG_COMBO_MODE(cbphy->bid), cb_mode); -- cgit v1.2.3 From 0cb5ebc749fde8562fb876f92ac5cc6e92bd89fb Mon Sep 17 00:00:00 2001 From: Rikard Falkeborn Date: Sun, 24 May 2020 11:55:15 +0200 Subject: phy: ti: am654-serdes: Constify regmap_config regmap_config is not modified and can be made static to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 12328 3644 64 16036 3ea4 drivers/phy/ti/phy-am654-serdes.o After: text data bss dec hex filename 12648 3324 64 16036 3ea4 drivers/phy/ti/phy-am654-serdes.o Signed-off-by: Rikard Falkeborn Link: https://lore.kernel.org/r/20200524095516.25227-2-rikard.falkeborn@gmail.com Signed-off-by: Vinod Koul --- drivers/phy/ti/phy-am654-serdes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c index 0a166d5a6414..a174b3c3f010 100644 --- a/drivers/phy/ti/phy-am654-serdes.c +++ b/drivers/phy/ti/phy-am654-serdes.c @@ -72,7 +72,7 @@ struct serdes_am654_clk_mux { #define to_serdes_am654_clk_mux(_hw) \ container_of(_hw, struct serdes_am654_clk_mux, hw) -static struct regmap_config serdes_am654_regmap_config = { +static const struct regmap_config serdes_am654_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, -- cgit v1.2.3 From 5a72122dcfd921940ce877963ddd7be4b089adf2 Mon Sep 17 00:00:00 2001 From: Rikard Falkeborn Date: Sun, 24 May 2020 11:55:16 +0200 Subject: phy: ti: j721e-wiz: Constify structs clk_div_table and wiz_regmap_config are not modified and can therefore be made const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 20265 7044 64 27373 6aed drivers/phy/ti/phy-j721e-wiz.o After: text data bss dec hex filename 20649 6660 64 27373 6aed drivers/phy/ti/phy-j721e-wiz.o Signed-off-by: Rikard Falkeborn Link: https://lore.kernel.org/r/20200524095516.25227-3-rikard.falkeborn@gmail.com Signed-off-by: Vinod Koul --- drivers/phy/ti/phy-j721e-wiz.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c index 30ea5b207285..33c4cf0105a4 100644 --- a/drivers/phy/ti/phy-j721e-wiz.c +++ b/drivers/phy/ti/phy-j721e-wiz.c @@ -117,7 +117,7 @@ struct wiz_clk_mux { struct wiz_clk_divider { struct clk_hw hw; struct regmap_field *field; - struct clk_div_table *table; + const struct clk_div_table *table; struct clk_init_data clk_data; }; @@ -131,7 +131,7 @@ struct wiz_clk_mux_sel { struct wiz_clk_div_sel { struct regmap_field *field; - struct clk_div_table *table; + const struct clk_div_table *table; const char *node_name; }; @@ -173,7 +173,7 @@ static struct wiz_clk_mux_sel clk_mux_sel_10g[] = { }, }; -static struct clk_div_table clk_div_table[] = { +static const struct clk_div_table clk_div_table[] = { { .val = 0, .div = 1, }, { .val = 1, .div = 2, }, { .val = 2, .div = 4, }, @@ -559,7 +559,7 @@ static const struct clk_ops wiz_clk_div_ops = { static int wiz_div_clk_register(struct wiz *wiz, struct device_node *node, struct regmap_field *field, - struct clk_div_table *table) + const struct clk_div_table *table) { struct device *dev = wiz->dev; struct wiz_clk_divider *div; @@ -756,7 +756,7 @@ static const struct reset_control_ops wiz_phy_reset_ops = { .deassert = wiz_phy_reset_deassert, }; -static struct regmap_config wiz_regmap_config = { +static const struct regmap_config wiz_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, -- cgit v1.2.3 From fdc355a03df537bc8d8909b86d1688fe07c7032b Mon Sep 17 00:00:00 2001 From: Tiezhu Yang Date: Mon, 25 May 2020 21:08:57 +0800 Subject: phy: rockchip: Fix return value of inno_dsidphy_probe() When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Fixes: b7535a3bc0ba ("phy/rockchip: Add support for Innosilicon MIPI/LVDS/TTL PHY") Signed-off-by: Tiezhu Yang Reviewed-by: Heiko Stuebner Link: https://lore.kernel.org/r/1590412138-13903-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Vinod Koul --- drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c index a7c6c940a3a8..8af8c6c5cc02 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c @@ -607,8 +607,8 @@ static int inno_dsidphy_probe(struct platform_device *pdev) platform_set_drvdata(pdev, inno); inno->phy_base = devm_platform_ioremap_resource(pdev, 0); - if (!inno->phy_base) - return -ENOMEM; + if (IS_ERR(inno->phy_base)) + return PTR_ERR(inno->phy_base); inno->ref_clk = devm_clk_get(dev, "ref"); if (IS_ERR(inno->ref_clk)) { -- cgit v1.2.3 From 8b94a4b92327d061327117e127d7d44a4a43e639 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 2 Apr 2020 12:45:34 +0300 Subject: thunderbolt: Fix path indices used in USB3 tunnel discovery The USB3 discovery used wrong indices when tunnel is discovered. It should use TB_USB3_PATH_DOWN for path that flows downstream and TB_USB3_PATH_UP when it flows upstream. This should not affect the functionality but better to fix it. Fixes: e6f818585713 ("thunderbolt: Add support for USB 3.x tunnels") Signed-off-by: Mika Westerberg Cc: stable@vger.kernel.org # v5.6+ --- drivers/thunderbolt/tunnel.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c index dbe90bcf4ad4..c144ca9b032c 100644 --- a/drivers/thunderbolt/tunnel.c +++ b/drivers/thunderbolt/tunnel.c @@ -913,21 +913,21 @@ struct tb_tunnel *tb_tunnel_discover_usb3(struct tb *tb, struct tb_port *down) * case. */ path = tb_path_discover(down, TB_USB3_HOPID, NULL, -1, - &tunnel->dst_port, "USB3 Up"); + &tunnel->dst_port, "USB3 Down"); if (!path) { /* Just disable the downstream port */ tb_usb3_port_enable(down, false); goto err_free; } - tunnel->paths[TB_USB3_PATH_UP] = path; - tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_UP]); + tunnel->paths[TB_USB3_PATH_DOWN] = path; + tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_DOWN]); path = tb_path_discover(tunnel->dst_port, -1, down, TB_USB3_HOPID, NULL, - "USB3 Down"); + "USB3 Up"); if (!path) goto err_deactivate; - tunnel->paths[TB_USB3_PATH_DOWN] = path; - tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_DOWN]); + tunnel->paths[TB_USB3_PATH_UP] = path; + tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_UP]); /* Validate that the tunnel is complete */ if (!tb_port_is_usb3_up(tunnel->dst_port)) { -- cgit v1.2.3 From 38b1927e5bf9bcad4a2e33189ef1c5569f9599ba Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 25 Jun 2020 13:44:28 +0100 Subject: phy: sun4i-usb: fix dereference of pointer phy0 before it is null checked Currently pointer phy0 is being dereferenced via the assignment of phy on the call to phy_get_drvdata before phy0 is null checked, this can lead to a null pointer dereference. Fix this by performing the null check on phy0 before the call to phy_get_drvdata. Also replace the phy0 == NULL check with the more usual !phy0 idiom. Addresses-Coverity: ("Dereference before null check") Fixes: e6f32efb1b12 ("phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode") Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20200625124428.83564-1-colin.king@canonical.com Signed-off-by: Vinod Koul --- drivers/phy/allwinner/phy-sun4i-usb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index 856927382248..e5842e48a5e0 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -545,13 +545,14 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) struct sun4i_usb_phy_data *data = container_of(work, struct sun4i_usb_phy_data, detect.work); struct phy *phy0 = data->phys[0].phy; - struct sun4i_usb_phy *phy = phy_get_drvdata(phy0); + struct sun4i_usb_phy *phy; bool force_session_end, id_notify = false, vbus_notify = false; int id_det, vbus_det; - if (phy0 == NULL) + if (!phy0) return; + phy = phy_get_drvdata(phy0); id_det = sun4i_usb_phy0_get_id_det(data); vbus_det = sun4i_usb_phy0_get_vbus_det(data); -- cgit v1.2.3 From f16861b12fa05717489e0c8fbe93a0b9346a6839 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 24 Jun 2020 12:10:10 -0500 Subject: regulator: rename da903x to da903x-regulator This module shares the same name as its parent PMIC driver, which confuses tools like kmod. Rename the regulator driver to avoid such problems. Signed-off-by: Seth Forshee Link: https://lore.kernel.org/r/20200624171010.845271-1-seth.forshee@canonical.com Signed-off-by: Mark Brown --- drivers/regulator/Makefile | 2 +- drivers/regulator/da903x-regulator.c | 494 +++++++++++++++++++++++++++++++++++ drivers/regulator/da903x.c | 494 ----------------------------------- 3 files changed, 495 insertions(+), 495 deletions(-) create mode 100644 drivers/regulator/da903x-regulator.c delete mode 100644 drivers/regulator/da903x.c diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index e8f163371071..0796e4a47afa 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -31,7 +31,7 @@ obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o obj-$(CONFIG_REGULATOR_BD71828) += bd71828-regulator.o obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o -obj-$(CONFIG_REGULATOR_DA903X) += da903x.o +obj-$(CONFIG_REGULATOR_DA903X) += da903x-regulator.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o obj-$(CONFIG_REGULATOR_DA9062) += da9062-regulator.o diff --git a/drivers/regulator/da903x-regulator.c b/drivers/regulator/da903x-regulator.c new file mode 100644 index 000000000000..770e694824ac --- /dev/null +++ b/drivers/regulator/da903x-regulator.c @@ -0,0 +1,494 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Regulators driver for Dialog Semiconductor DA903x +// +// Copyright (C) 2006-2008 Marvell International Ltd. +// Copyright (C) 2008 Compulab Ltd. + +#include +#include +#include +#include +#include +#include +#include +#include + +/* DA9030 Registers */ +#define DA9030_INVAL (-1) +#define DA9030_LDO1011 (0x10) +#define DA9030_LDO15 (0x11) +#define DA9030_LDO1416 (0x12) +#define DA9030_LDO1819 (0x13) +#define DA9030_LDO17 (0x14) +#define DA9030_BUCK2DVM1 (0x15) +#define DA9030_BUCK2DVM2 (0x16) +#define DA9030_RCTL11 (0x17) +#define DA9030_RCTL21 (0x18) +#define DA9030_LDO1 (0x90) +#define DA9030_LDO23 (0x91) +#define DA9030_LDO45 (0x92) +#define DA9030_LDO6 (0x93) +#define DA9030_LDO78 (0x94) +#define DA9030_LDO912 (0x95) +#define DA9030_BUCK (0x96) +#define DA9030_RCTL12 (0x97) +#define DA9030_RCTL22 (0x98) +#define DA9030_LDO_UNLOCK (0xa0) +#define DA9030_LDO_UNLOCK_MASK (0xe0) +#define DA9034_OVER1 (0x10) + +/* DA9034 Registers */ +#define DA9034_INVAL (-1) +#define DA9034_OVER2 (0x11) +#define DA9034_OVER3 (0x12) +#define DA9034_LDO643 (0x13) +#define DA9034_LDO987 (0x14) +#define DA9034_LDO1110 (0x15) +#define DA9034_LDO1312 (0x16) +#define DA9034_LDO1514 (0x17) +#define DA9034_VCC1 (0x20) +#define DA9034_ADTV1 (0x23) +#define DA9034_ADTV2 (0x24) +#define DA9034_AVRC (0x25) +#define DA9034_CDTV1 (0x26) +#define DA9034_CDTV2 (0x27) +#define DA9034_CVRC (0x28) +#define DA9034_SDTV1 (0x29) +#define DA9034_SDTV2 (0x2a) +#define DA9034_SVRC (0x2b) +#define DA9034_MDTV1 (0x32) +#define DA9034_MDTV2 (0x33) +#define DA9034_MVRC (0x34) + +/* DA9035 Registers. DA9034 Registers are comptabile to DA9035. */ +#define DA9035_OVER3 (0x12) +#define DA9035_VCC2 (0x1f) +#define DA9035_3DTV1 (0x2c) +#define DA9035_3DTV2 (0x2d) +#define DA9035_3VRC (0x2e) +#define DA9035_AUTOSKIP (0x2f) + +struct da903x_regulator_info { + struct regulator_desc desc; + + int max_uV; + int vol_reg; + int vol_shift; + int vol_nbits; + int update_reg; + int update_bit; + int enable_reg; + int enable_bit; +}; + +static inline struct device *to_da903x_dev(struct regulator_dev *rdev) +{ + return rdev_get_dev(rdev)->parent->parent; +} + +static inline int check_range(struct da903x_regulator_info *info, + int min_uV, int max_uV) +{ + if (min_uV < info->desc.min_uV || min_uV > info->max_uV) + return -EINVAL; + + return 0; +} + +/* DA9030/DA9034 common operations */ +static int da903x_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = to_da903x_dev(rdev); + uint8_t val, mask; + + if (rdev->desc->n_voltages == 1) + return -EINVAL; + + val = selector << info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + return da903x_update(da9034_dev, info->vol_reg, val, mask); +} + +static int da903x_get_voltage_sel(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = to_da903x_dev(rdev); + uint8_t val, mask; + int ret; + + if (rdev->desc->n_voltages == 1) + return 0; + + ret = da903x_read(da9034_dev, info->vol_reg, &val); + if (ret) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = (val & mask) >> info->vol_shift; + + return val; +} + +static int da903x_enable(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = to_da903x_dev(rdev); + + return da903x_set_bits(da9034_dev, info->enable_reg, + 1 << info->enable_bit); +} + +static int da903x_disable(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = to_da903x_dev(rdev); + + return da903x_clr_bits(da9034_dev, info->enable_reg, + 1 << info->enable_bit); +} + +static int da903x_is_enabled(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = to_da903x_dev(rdev); + uint8_t reg_val; + int ret; + + ret = da903x_read(da9034_dev, info->enable_reg, ®_val); + if (ret) + return ret; + + return !!(reg_val & (1 << info->enable_bit)); +} + +/* DA9030 specific operations */ +static int da9030_set_ldo1_15_voltage_sel(struct regulator_dev *rdev, + unsigned selector) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da903x_dev = to_da903x_dev(rdev); + uint8_t val, mask; + int ret; + + val = selector << info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val |= DA9030_LDO_UNLOCK; /* have to set UNLOCK bits */ + mask |= DA9030_LDO_UNLOCK_MASK; + + /* write twice */ + ret = da903x_update(da903x_dev, info->vol_reg, val, mask); + if (ret) + return ret; + + return da903x_update(da903x_dev, info->vol_reg, val, mask); +} + +static int da9030_map_ldo14_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + int thresh, sel; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); + return -EINVAL; + } + + thresh = (info->max_uV + info->desc.min_uV) / 2; + if (min_uV < thresh) { + sel = DIV_ROUND_UP(thresh - min_uV, info->desc.uV_step); + sel |= 0x4; + } else { + sel = DIV_ROUND_UP(min_uV - thresh, info->desc.uV_step); + } + + return sel; +} + +static int da9030_list_ldo14_voltage(struct regulator_dev *rdev, + unsigned selector) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + int volt; + + if (selector & 0x4) + volt = rdev->desc->min_uV + + rdev->desc->uV_step * (3 - (selector & ~0x4)); + else + volt = (info->max_uV + rdev->desc->min_uV) / 2 + + rdev->desc->uV_step * (selector & ~0x4); + + if (volt > info->max_uV) + return -EINVAL; + + return volt; +} + +/* DA9034 specific operations */ +static int da9034_set_dvc_voltage_sel(struct regulator_dev *rdev, + unsigned selector) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = to_da903x_dev(rdev); + uint8_t val, mask; + int ret; + + val = selector << info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + ret = da903x_update(da9034_dev, info->vol_reg, val, mask); + if (ret) + return ret; + + ret = da903x_set_bits(da9034_dev, info->update_reg, + 1 << info->update_bit); + return ret; +} + +static const struct linear_range da9034_ldo12_ranges[] = { + REGULATOR_LINEAR_RANGE(1700000, 0, 7, 50000), + REGULATOR_LINEAR_RANGE(2700000, 8, 15, 50000), +}; + +static const struct regulator_ops da903x_regulator_ldo_ops = { + .set_voltage_sel = da903x_set_voltage_sel, + .get_voltage_sel = da903x_get_voltage_sel, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +/* NOTE: this is dedicated for the insane DA9030 LDO14 */ +static const struct regulator_ops da9030_regulator_ldo14_ops = { + .set_voltage_sel = da903x_set_voltage_sel, + .get_voltage_sel = da903x_get_voltage_sel, + .list_voltage = da9030_list_ldo14_voltage, + .map_voltage = da9030_map_ldo14_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +/* NOTE: this is dedicated for the DA9030 LDO1 and LDO15 that have locks */ +static const struct regulator_ops da9030_regulator_ldo1_15_ops = { + .set_voltage_sel = da9030_set_ldo1_15_voltage_sel, + .get_voltage_sel = da903x_get_voltage_sel, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +static const struct regulator_ops da9034_regulator_dvc_ops = { + .set_voltage_sel = da9034_set_dvc_voltage_sel, + .get_voltage_sel = da903x_get_voltage_sel, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +/* NOTE: this is dedicated for the insane LDO12 */ +static const struct regulator_ops da9034_regulator_ldo12_ops = { + .set_voltage_sel = da903x_set_voltage_sel, + .get_voltage_sel = da903x_get_voltage_sel, + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +#define DA903x_LDO(_pmic, _id, min, max, step, vreg, shift, nbits, ereg, ebit) \ +{ \ + .desc = { \ + .name = "LDO" #_id, \ + .ops = &da903x_regulator_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _pmic##_ID_LDO##_id, \ + .n_voltages = (step) ? ((max - min) / step + 1) : 1, \ + .owner = THIS_MODULE, \ + .min_uV = (min) * 1000, \ + .uV_step = (step) * 1000, \ + }, \ + .max_uV = (max) * 1000, \ + .vol_reg = _pmic##_##vreg, \ + .vol_shift = (shift), \ + .vol_nbits = (nbits), \ + .enable_reg = _pmic##_##ereg, \ + .enable_bit = (ebit), \ +} + +#define DA903x_DVC(_pmic, _id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ +{ \ + .desc = { \ + .name = #_id, \ + .ops = &da9034_regulator_dvc_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _pmic##_ID_##_id, \ + .n_voltages = (step) ? ((max - min) / step + 1) : 1, \ + .owner = THIS_MODULE, \ + .min_uV = (min) * 1000, \ + .uV_step = (step) * 1000, \ + }, \ + .max_uV = (max) * 1000, \ + .vol_reg = _pmic##_##vreg, \ + .vol_shift = (0), \ + .vol_nbits = (nbits), \ + .update_reg = _pmic##_##ureg, \ + .update_bit = (ubit), \ + .enable_reg = _pmic##_##ereg, \ + .enable_bit = (ebit), \ +} + +#define DA9034_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ + DA903x_LDO(DA9034, _id, min, max, step, vreg, shift, nbits, ereg, ebit) + +#define DA9030_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ + DA903x_LDO(DA9030, _id, min, max, step, vreg, shift, nbits, ereg, ebit) + +#define DA9030_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ + DA903x_DVC(DA9030, _id, min, max, step, vreg, nbits, ureg, ubit, \ + ereg, ebit) + +#define DA9034_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ + DA903x_DVC(DA9034, _id, min, max, step, vreg, nbits, ureg, ubit, \ + ereg, ebit) + +#define DA9035_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ + DA903x_DVC(DA9035, _id, min, max, step, vreg, nbits, ureg, ubit, \ + ereg, ebit) + +static struct da903x_regulator_info da903x_regulator_info[] = { + /* DA9030 */ + DA9030_DVC(BUCK2, 850, 1625, 25, BUCK2DVM1, 5, BUCK2DVM1, 7, RCTL11, 0), + + DA9030_LDO( 1, 1200, 3200, 100, LDO1, 0, 5, RCTL12, 1), + DA9030_LDO( 2, 1800, 3200, 100, LDO23, 0, 4, RCTL12, 2), + DA9030_LDO( 3, 1800, 3200, 100, LDO23, 4, 4, RCTL12, 3), + DA9030_LDO( 4, 1800, 3200, 100, LDO45, 0, 4, RCTL12, 4), + DA9030_LDO( 5, 1800, 3200, 100, LDO45, 4, 4, RCTL12, 5), + DA9030_LDO( 6, 1800, 3200, 100, LDO6, 0, 4, RCTL12, 6), + DA9030_LDO( 7, 1800, 3200, 100, LDO78, 0, 4, RCTL12, 7), + DA9030_LDO( 8, 1800, 3200, 100, LDO78, 4, 4, RCTL22, 0), + DA9030_LDO( 9, 1800, 3200, 100, LDO912, 0, 4, RCTL22, 1), + DA9030_LDO(10, 1800, 3200, 100, LDO1011, 0, 4, RCTL22, 2), + DA9030_LDO(11, 1800, 3200, 100, LDO1011, 4, 4, RCTL22, 3), + DA9030_LDO(12, 1800, 3200, 100, LDO912, 4, 4, RCTL22, 4), + DA9030_LDO(14, 2760, 2940, 30, LDO1416, 0, 3, RCTL11, 4), + DA9030_LDO(15, 1100, 2650, 50, LDO15, 0, 5, RCTL11, 5), + DA9030_LDO(16, 1100, 2650, 50, LDO1416, 3, 5, RCTL11, 6), + DA9030_LDO(17, 1800, 3200, 100, LDO17, 0, 4, RCTL11, 7), + DA9030_LDO(18, 1800, 3200, 100, LDO1819, 0, 4, RCTL21, 2), + DA9030_LDO(19, 1800, 3200, 100, LDO1819, 4, 4, RCTL21, 1), + DA9030_LDO(13, 2100, 2100, 0, INVAL, 0, 0, RCTL11, 3), /* fixed @2.1V */ + + /* DA9034 */ + DA9034_DVC(BUCK1, 725, 1500, 25, ADTV2, 5, VCC1, 0, OVER1, 0), + DA9034_DVC(BUCK2, 725, 1500, 25, CDTV2, 5, VCC1, 2, OVER1, 1), + DA9034_DVC(LDO2, 725, 1500, 25, SDTV2, 5, VCC1, 4, OVER1, 2), + DA9034_DVC(LDO1, 1700, 2075, 25, MDTV1, 4, VCC1, 6, OVER3, 4), + + DA9034_LDO( 3, 1800, 3300, 100, LDO643, 0, 4, OVER3, 5), + DA9034_LDO( 4, 1800, 2900,1100, LDO643, 4, 1, OVER3, 6), + DA9034_LDO( 6, 2500, 2850, 50, LDO643, 5, 3, OVER2, 0), + DA9034_LDO( 7, 2700, 3050, 50, LDO987, 0, 3, OVER2, 1), + DA9034_LDO( 8, 2700, 2850, 50, LDO987, 3, 2, OVER2, 2), + DA9034_LDO( 9, 2700, 3050, 50, LDO987, 5, 3, OVER2, 3), + DA9034_LDO(10, 2700, 3050, 50, LDO1110, 0, 3, OVER2, 4), + DA9034_LDO(11, 1800, 3300, 100, LDO1110, 4, 4, OVER2, 5), + DA9034_LDO(12, 1700, 3050, 50, LDO1312, 0, 4, OVER3, 6), + DA9034_LDO(13, 1800, 3300, 100, LDO1312, 4, 4, OVER2, 7), + DA9034_LDO(14, 1800, 3300, 100, LDO1514, 0, 4, OVER3, 0), + DA9034_LDO(15, 1800, 3300, 100, LDO1514, 4, 4, OVER3, 1), + DA9034_LDO(5, 3100, 3100, 0, INVAL, 0, 0, OVER3, 7), /* fixed @3.1V */ + + /* DA9035 */ + DA9035_DVC(BUCK3, 1800, 2200, 100, 3DTV1, 3, VCC2, 0, OVER3, 3), +}; + +static inline struct da903x_regulator_info *find_regulator_info(int id) +{ + struct da903x_regulator_info *ri; + int i; + + for (i = 0; i < ARRAY_SIZE(da903x_regulator_info); i++) { + ri = &da903x_regulator_info[i]; + if (ri->desc.id == id) + return ri; + } + return NULL; +} + +static int da903x_regulator_probe(struct platform_device *pdev) +{ + struct da903x_regulator_info *ri = NULL; + struct regulator_dev *rdev; + struct regulator_config config = { }; + + ri = find_regulator_info(pdev->id); + if (ri == NULL) { + dev_err(&pdev->dev, "invalid regulator ID specified\n"); + return -EINVAL; + } + + /* Workaround for the weird LDO12 voltage setting */ + if (ri->desc.id == DA9034_ID_LDO12) { + ri->desc.ops = &da9034_regulator_ldo12_ops; + ri->desc.n_voltages = 16; + ri->desc.linear_ranges = da9034_ldo12_ranges; + ri->desc.n_linear_ranges = ARRAY_SIZE(da9034_ldo12_ranges); + } + + if (ri->desc.id == DA9030_ID_LDO14) + ri->desc.ops = &da9030_regulator_ldo14_ops; + + if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15) + ri->desc.ops = &da9030_regulator_ldo1_15_ops; + + config.dev = &pdev->dev; + config.init_data = dev_get_platdata(&pdev->dev); + config.driver_data = ri; + + rdev = devm_regulator_register(&pdev->dev, &ri->desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + ri->desc.name); + return PTR_ERR(rdev); + } + + platform_set_drvdata(pdev, rdev); + return 0; +} + +static struct platform_driver da903x_regulator_driver = { + .driver = { + .name = "da903x-regulator", + }, + .probe = da903x_regulator_probe, +}; + +static int __init da903x_regulator_init(void) +{ + return platform_driver_register(&da903x_regulator_driver); +} +subsys_initcall(da903x_regulator_init); + +static void __exit da903x_regulator_exit(void) +{ + platform_driver_unregister(&da903x_regulator_driver); +} +module_exit(da903x_regulator_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Eric Miao " + "Mike Rapoport "); +MODULE_DESCRIPTION("Regulator Driver for Dialog Semiconductor DA903X PMIC"); +MODULE_ALIAS("platform:da903x-regulator"); diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c deleted file mode 100644 index 770e694824ac..000000000000 --- a/drivers/regulator/da903x.c +++ /dev/null @@ -1,494 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Regulators driver for Dialog Semiconductor DA903x -// -// Copyright (C) 2006-2008 Marvell International Ltd. -// Copyright (C) 2008 Compulab Ltd. - -#include -#include -#include -#include -#include -#include -#include -#include - -/* DA9030 Registers */ -#define DA9030_INVAL (-1) -#define DA9030_LDO1011 (0x10) -#define DA9030_LDO15 (0x11) -#define DA9030_LDO1416 (0x12) -#define DA9030_LDO1819 (0x13) -#define DA9030_LDO17 (0x14) -#define DA9030_BUCK2DVM1 (0x15) -#define DA9030_BUCK2DVM2 (0x16) -#define DA9030_RCTL11 (0x17) -#define DA9030_RCTL21 (0x18) -#define DA9030_LDO1 (0x90) -#define DA9030_LDO23 (0x91) -#define DA9030_LDO45 (0x92) -#define DA9030_LDO6 (0x93) -#define DA9030_LDO78 (0x94) -#define DA9030_LDO912 (0x95) -#define DA9030_BUCK (0x96) -#define DA9030_RCTL12 (0x97) -#define DA9030_RCTL22 (0x98) -#define DA9030_LDO_UNLOCK (0xa0) -#define DA9030_LDO_UNLOCK_MASK (0xe0) -#define DA9034_OVER1 (0x10) - -/* DA9034 Registers */ -#define DA9034_INVAL (-1) -#define DA9034_OVER2 (0x11) -#define DA9034_OVER3 (0x12) -#define DA9034_LDO643 (0x13) -#define DA9034_LDO987 (0x14) -#define DA9034_LDO1110 (0x15) -#define DA9034_LDO1312 (0x16) -#define DA9034_LDO1514 (0x17) -#define DA9034_VCC1 (0x20) -#define DA9034_ADTV1 (0x23) -#define DA9034_ADTV2 (0x24) -#define DA9034_AVRC (0x25) -#define DA9034_CDTV1 (0x26) -#define DA9034_CDTV2 (0x27) -#define DA9034_CVRC (0x28) -#define DA9034_SDTV1 (0x29) -#define DA9034_SDTV2 (0x2a) -#define DA9034_SVRC (0x2b) -#define DA9034_MDTV1 (0x32) -#define DA9034_MDTV2 (0x33) -#define DA9034_MVRC (0x34) - -/* DA9035 Registers. DA9034 Registers are comptabile to DA9035. */ -#define DA9035_OVER3 (0x12) -#define DA9035_VCC2 (0x1f) -#define DA9035_3DTV1 (0x2c) -#define DA9035_3DTV2 (0x2d) -#define DA9035_3VRC (0x2e) -#define DA9035_AUTOSKIP (0x2f) - -struct da903x_regulator_info { - struct regulator_desc desc; - - int max_uV; - int vol_reg; - int vol_shift; - int vol_nbits; - int update_reg; - int update_bit; - int enable_reg; - int enable_bit; -}; - -static inline struct device *to_da903x_dev(struct regulator_dev *rdev) -{ - return rdev_get_dev(rdev)->parent->parent; -} - -static inline int check_range(struct da903x_regulator_info *info, - int min_uV, int max_uV) -{ - if (min_uV < info->desc.min_uV || min_uV > info->max_uV) - return -EINVAL; - - return 0; -} - -/* DA9030/DA9034 common operations */ -static int da903x_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) -{ - struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = to_da903x_dev(rdev); - uint8_t val, mask; - - if (rdev->desc->n_voltages == 1) - return -EINVAL; - - val = selector << info->vol_shift; - mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; - - return da903x_update(da9034_dev, info->vol_reg, val, mask); -} - -static int da903x_get_voltage_sel(struct regulator_dev *rdev) -{ - struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = to_da903x_dev(rdev); - uint8_t val, mask; - int ret; - - if (rdev->desc->n_voltages == 1) - return 0; - - ret = da903x_read(da9034_dev, info->vol_reg, &val); - if (ret) - return ret; - - mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; - val = (val & mask) >> info->vol_shift; - - return val; -} - -static int da903x_enable(struct regulator_dev *rdev) -{ - struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = to_da903x_dev(rdev); - - return da903x_set_bits(da9034_dev, info->enable_reg, - 1 << info->enable_bit); -} - -static int da903x_disable(struct regulator_dev *rdev) -{ - struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = to_da903x_dev(rdev); - - return da903x_clr_bits(da9034_dev, info->enable_reg, - 1 << info->enable_bit); -} - -static int da903x_is_enabled(struct regulator_dev *rdev) -{ - struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = to_da903x_dev(rdev); - uint8_t reg_val; - int ret; - - ret = da903x_read(da9034_dev, info->enable_reg, ®_val); - if (ret) - return ret; - - return !!(reg_val & (1 << info->enable_bit)); -} - -/* DA9030 specific operations */ -static int da9030_set_ldo1_15_voltage_sel(struct regulator_dev *rdev, - unsigned selector) -{ - struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da903x_dev = to_da903x_dev(rdev); - uint8_t val, mask; - int ret; - - val = selector << info->vol_shift; - mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; - val |= DA9030_LDO_UNLOCK; /* have to set UNLOCK bits */ - mask |= DA9030_LDO_UNLOCK_MASK; - - /* write twice */ - ret = da903x_update(da903x_dev, info->vol_reg, val, mask); - if (ret) - return ret; - - return da903x_update(da903x_dev, info->vol_reg, val, mask); -} - -static int da9030_map_ldo14_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV) -{ - struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - int thresh, sel; - - if (check_range(info, min_uV, max_uV)) { - pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); - return -EINVAL; - } - - thresh = (info->max_uV + info->desc.min_uV) / 2; - if (min_uV < thresh) { - sel = DIV_ROUND_UP(thresh - min_uV, info->desc.uV_step); - sel |= 0x4; - } else { - sel = DIV_ROUND_UP(min_uV - thresh, info->desc.uV_step); - } - - return sel; -} - -static int da9030_list_ldo14_voltage(struct regulator_dev *rdev, - unsigned selector) -{ - struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - int volt; - - if (selector & 0x4) - volt = rdev->desc->min_uV + - rdev->desc->uV_step * (3 - (selector & ~0x4)); - else - volt = (info->max_uV + rdev->desc->min_uV) / 2 + - rdev->desc->uV_step * (selector & ~0x4); - - if (volt > info->max_uV) - return -EINVAL; - - return volt; -} - -/* DA9034 specific operations */ -static int da9034_set_dvc_voltage_sel(struct regulator_dev *rdev, - unsigned selector) -{ - struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = to_da903x_dev(rdev); - uint8_t val, mask; - int ret; - - val = selector << info->vol_shift; - mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; - - ret = da903x_update(da9034_dev, info->vol_reg, val, mask); - if (ret) - return ret; - - ret = da903x_set_bits(da9034_dev, info->update_reg, - 1 << info->update_bit); - return ret; -} - -static const struct linear_range da9034_ldo12_ranges[] = { - REGULATOR_LINEAR_RANGE(1700000, 0, 7, 50000), - REGULATOR_LINEAR_RANGE(2700000, 8, 15, 50000), -}; - -static const struct regulator_ops da903x_regulator_ldo_ops = { - .set_voltage_sel = da903x_set_voltage_sel, - .get_voltage_sel = da903x_get_voltage_sel, - .list_voltage = regulator_list_voltage_linear, - .map_voltage = regulator_map_voltage_linear, - .enable = da903x_enable, - .disable = da903x_disable, - .is_enabled = da903x_is_enabled, -}; - -/* NOTE: this is dedicated for the insane DA9030 LDO14 */ -static const struct regulator_ops da9030_regulator_ldo14_ops = { - .set_voltage_sel = da903x_set_voltage_sel, - .get_voltage_sel = da903x_get_voltage_sel, - .list_voltage = da9030_list_ldo14_voltage, - .map_voltage = da9030_map_ldo14_voltage, - .enable = da903x_enable, - .disable = da903x_disable, - .is_enabled = da903x_is_enabled, -}; - -/* NOTE: this is dedicated for the DA9030 LDO1 and LDO15 that have locks */ -static const struct regulator_ops da9030_regulator_ldo1_15_ops = { - .set_voltage_sel = da9030_set_ldo1_15_voltage_sel, - .get_voltage_sel = da903x_get_voltage_sel, - .list_voltage = regulator_list_voltage_linear, - .map_voltage = regulator_map_voltage_linear, - .enable = da903x_enable, - .disable = da903x_disable, - .is_enabled = da903x_is_enabled, -}; - -static const struct regulator_ops da9034_regulator_dvc_ops = { - .set_voltage_sel = da9034_set_dvc_voltage_sel, - .get_voltage_sel = da903x_get_voltage_sel, - .list_voltage = regulator_list_voltage_linear, - .map_voltage = regulator_map_voltage_linear, - .enable = da903x_enable, - .disable = da903x_disable, - .is_enabled = da903x_is_enabled, -}; - -/* NOTE: this is dedicated for the insane LDO12 */ -static const struct regulator_ops da9034_regulator_ldo12_ops = { - .set_voltage_sel = da903x_set_voltage_sel, - .get_voltage_sel = da903x_get_voltage_sel, - .list_voltage = regulator_list_voltage_linear_range, - .map_voltage = regulator_map_voltage_linear_range, - .enable = da903x_enable, - .disable = da903x_disable, - .is_enabled = da903x_is_enabled, -}; - -#define DA903x_LDO(_pmic, _id, min, max, step, vreg, shift, nbits, ereg, ebit) \ -{ \ - .desc = { \ - .name = "LDO" #_id, \ - .ops = &da903x_regulator_ldo_ops, \ - .type = REGULATOR_VOLTAGE, \ - .id = _pmic##_ID_LDO##_id, \ - .n_voltages = (step) ? ((max - min) / step + 1) : 1, \ - .owner = THIS_MODULE, \ - .min_uV = (min) * 1000, \ - .uV_step = (step) * 1000, \ - }, \ - .max_uV = (max) * 1000, \ - .vol_reg = _pmic##_##vreg, \ - .vol_shift = (shift), \ - .vol_nbits = (nbits), \ - .enable_reg = _pmic##_##ereg, \ - .enable_bit = (ebit), \ -} - -#define DA903x_DVC(_pmic, _id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ -{ \ - .desc = { \ - .name = #_id, \ - .ops = &da9034_regulator_dvc_ops, \ - .type = REGULATOR_VOLTAGE, \ - .id = _pmic##_ID_##_id, \ - .n_voltages = (step) ? ((max - min) / step + 1) : 1, \ - .owner = THIS_MODULE, \ - .min_uV = (min) * 1000, \ - .uV_step = (step) * 1000, \ - }, \ - .max_uV = (max) * 1000, \ - .vol_reg = _pmic##_##vreg, \ - .vol_shift = (0), \ - .vol_nbits = (nbits), \ - .update_reg = _pmic##_##ureg, \ - .update_bit = (ubit), \ - .enable_reg = _pmic##_##ereg, \ - .enable_bit = (ebit), \ -} - -#define DA9034_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ - DA903x_LDO(DA9034, _id, min, max, step, vreg, shift, nbits, ereg, ebit) - -#define DA9030_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ - DA903x_LDO(DA9030, _id, min, max, step, vreg, shift, nbits, ereg, ebit) - -#define DA9030_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ - DA903x_DVC(DA9030, _id, min, max, step, vreg, nbits, ureg, ubit, \ - ereg, ebit) - -#define DA9034_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ - DA903x_DVC(DA9034, _id, min, max, step, vreg, nbits, ureg, ubit, \ - ereg, ebit) - -#define DA9035_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ - DA903x_DVC(DA9035, _id, min, max, step, vreg, nbits, ureg, ubit, \ - ereg, ebit) - -static struct da903x_regulator_info da903x_regulator_info[] = { - /* DA9030 */ - DA9030_DVC(BUCK2, 850, 1625, 25, BUCK2DVM1, 5, BUCK2DVM1, 7, RCTL11, 0), - - DA9030_LDO( 1, 1200, 3200, 100, LDO1, 0, 5, RCTL12, 1), - DA9030_LDO( 2, 1800, 3200, 100, LDO23, 0, 4, RCTL12, 2), - DA9030_LDO( 3, 1800, 3200, 100, LDO23, 4, 4, RCTL12, 3), - DA9030_LDO( 4, 1800, 3200, 100, LDO45, 0, 4, RCTL12, 4), - DA9030_LDO( 5, 1800, 3200, 100, LDO45, 4, 4, RCTL12, 5), - DA9030_LDO( 6, 1800, 3200, 100, LDO6, 0, 4, RCTL12, 6), - DA9030_LDO( 7, 1800, 3200, 100, LDO78, 0, 4, RCTL12, 7), - DA9030_LDO( 8, 1800, 3200, 100, LDO78, 4, 4, RCTL22, 0), - DA9030_LDO( 9, 1800, 3200, 100, LDO912, 0, 4, RCTL22, 1), - DA9030_LDO(10, 1800, 3200, 100, LDO1011, 0, 4, RCTL22, 2), - DA9030_LDO(11, 1800, 3200, 100, LDO1011, 4, 4, RCTL22, 3), - DA9030_LDO(12, 1800, 3200, 100, LDO912, 4, 4, RCTL22, 4), - DA9030_LDO(14, 2760, 2940, 30, LDO1416, 0, 3, RCTL11, 4), - DA9030_LDO(15, 1100, 2650, 50, LDO15, 0, 5, RCTL11, 5), - DA9030_LDO(16, 1100, 2650, 50, LDO1416, 3, 5, RCTL11, 6), - DA9030_LDO(17, 1800, 3200, 100, LDO17, 0, 4, RCTL11, 7), - DA9030_LDO(18, 1800, 3200, 100, LDO1819, 0, 4, RCTL21, 2), - DA9030_LDO(19, 1800, 3200, 100, LDO1819, 4, 4, RCTL21, 1), - DA9030_LDO(13, 2100, 2100, 0, INVAL, 0, 0, RCTL11, 3), /* fixed @2.1V */ - - /* DA9034 */ - DA9034_DVC(BUCK1, 725, 1500, 25, ADTV2, 5, VCC1, 0, OVER1, 0), - DA9034_DVC(BUCK2, 725, 1500, 25, CDTV2, 5, VCC1, 2, OVER1, 1), - DA9034_DVC(LDO2, 725, 1500, 25, SDTV2, 5, VCC1, 4, OVER1, 2), - DA9034_DVC(LDO1, 1700, 2075, 25, MDTV1, 4, VCC1, 6, OVER3, 4), - - DA9034_LDO( 3, 1800, 3300, 100, LDO643, 0, 4, OVER3, 5), - DA9034_LDO( 4, 1800, 2900,1100, LDO643, 4, 1, OVER3, 6), - DA9034_LDO( 6, 2500, 2850, 50, LDO643, 5, 3, OVER2, 0), - DA9034_LDO( 7, 2700, 3050, 50, LDO987, 0, 3, OVER2, 1), - DA9034_LDO( 8, 2700, 2850, 50, LDO987, 3, 2, OVER2, 2), - DA9034_LDO( 9, 2700, 3050, 50, LDO987, 5, 3, OVER2, 3), - DA9034_LDO(10, 2700, 3050, 50, LDO1110, 0, 3, OVER2, 4), - DA9034_LDO(11, 1800, 3300, 100, LDO1110, 4, 4, OVER2, 5), - DA9034_LDO(12, 1700, 3050, 50, LDO1312, 0, 4, OVER3, 6), - DA9034_LDO(13, 1800, 3300, 100, LDO1312, 4, 4, OVER2, 7), - DA9034_LDO(14, 1800, 3300, 100, LDO1514, 0, 4, OVER3, 0), - DA9034_LDO(15, 1800, 3300, 100, LDO1514, 4, 4, OVER3, 1), - DA9034_LDO(5, 3100, 3100, 0, INVAL, 0, 0, OVER3, 7), /* fixed @3.1V */ - - /* DA9035 */ - DA9035_DVC(BUCK3, 1800, 2200, 100, 3DTV1, 3, VCC2, 0, OVER3, 3), -}; - -static inline struct da903x_regulator_info *find_regulator_info(int id) -{ - struct da903x_regulator_info *ri; - int i; - - for (i = 0; i < ARRAY_SIZE(da903x_regulator_info); i++) { - ri = &da903x_regulator_info[i]; - if (ri->desc.id == id) - return ri; - } - return NULL; -} - -static int da903x_regulator_probe(struct platform_device *pdev) -{ - struct da903x_regulator_info *ri = NULL; - struct regulator_dev *rdev; - struct regulator_config config = { }; - - ri = find_regulator_info(pdev->id); - if (ri == NULL) { - dev_err(&pdev->dev, "invalid regulator ID specified\n"); - return -EINVAL; - } - - /* Workaround for the weird LDO12 voltage setting */ - if (ri->desc.id == DA9034_ID_LDO12) { - ri->desc.ops = &da9034_regulator_ldo12_ops; - ri->desc.n_voltages = 16; - ri->desc.linear_ranges = da9034_ldo12_ranges; - ri->desc.n_linear_ranges = ARRAY_SIZE(da9034_ldo12_ranges); - } - - if (ri->desc.id == DA9030_ID_LDO14) - ri->desc.ops = &da9030_regulator_ldo14_ops; - - if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15) - ri->desc.ops = &da9030_regulator_ldo1_15_ops; - - config.dev = &pdev->dev; - config.init_data = dev_get_platdata(&pdev->dev); - config.driver_data = ri; - - rdev = devm_regulator_register(&pdev->dev, &ri->desc, &config); - if (IS_ERR(rdev)) { - dev_err(&pdev->dev, "failed to register regulator %s\n", - ri->desc.name); - return PTR_ERR(rdev); - } - - platform_set_drvdata(pdev, rdev); - return 0; -} - -static struct platform_driver da903x_regulator_driver = { - .driver = { - .name = "da903x-regulator", - }, - .probe = da903x_regulator_probe, -}; - -static int __init da903x_regulator_init(void) -{ - return platform_driver_register(&da903x_regulator_driver); -} -subsys_initcall(da903x_regulator_init); - -static void __exit da903x_regulator_exit(void) -{ - platform_driver_unregister(&da903x_regulator_driver); -} -module_exit(da903x_regulator_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Eric Miao " - "Mike Rapoport "); -MODULE_DESCRIPTION("Regulator Driver for Dialog Semiconductor DA903X PMIC"); -MODULE_ALIAS("platform:da903x-regulator"); -- cgit v1.2.3 From 0bda49f30ca48998102eb0a0b53970c3a3558be0 Mon Sep 17 00:00:00 2001 From: Arvind Sankar Date: Thu, 18 Jun 2020 15:10:59 -0400 Subject: efi/x86: Remove unused variables Commit 987053a30016 ("efi/x86: Move command-line initrd loading to efi_main") made the ramdisk_addr/ramdisk_size variables in efi_pe_entry unused, but neglected to delete them. Delete these unused variables. Signed-off-by: Arvind Sankar Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/libstub/x86-stub.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c index 5a48d996ed71..37e82bf397aa 100644 --- a/drivers/firmware/efi/libstub/x86-stub.c +++ b/drivers/firmware/efi/libstub/x86-stub.c @@ -361,8 +361,6 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle, int options_size = 0; efi_status_t status; char *cmdline_ptr; - unsigned long ramdisk_addr; - unsigned long ramdisk_size; efi_system_table = sys_table_arg; -- cgit v1.2.3 From 59476f80d8781a84e25f0cbcf378ccab1ad7abf8 Mon Sep 17 00:00:00 2001 From: Arvind Sankar Date: Thu, 18 Jun 2020 16:43:15 -0400 Subject: efi/x86: Only copy upto the end of setup_header When copying the setup_header into the boot_params buffer, only the data that is actually part of the setup_header should be copied. efi_pe_entry() currently copies the entire second sector, which initializes some of the fields in boot_params beyond the setup_header with garbage (i.e. part of the real-mode boot code gets copied into those fields). This does not cause any issues currently because the fields that are overwritten are padding, BIOS EDD information that won't get used, and the E820 table which will get properly filled in later. Fix this to only copy data that is actually part of the setup_header structure. Signed-off-by: Arvind Sankar Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/libstub/x86-stub.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c index 37e82bf397aa..3672539cb96e 100644 --- a/drivers/firmware/efi/libstub/x86-stub.c +++ b/drivers/firmware/efi/libstub/x86-stub.c @@ -8,6 +8,7 @@ #include #include +#include #include #include @@ -388,8 +389,9 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle, hdr = &boot_params->hdr; - /* Copy the second sector to boot_params */ - memcpy(&hdr->jump, image_base + 512, 512); + /* Copy the setup header from the second sector to boot_params */ + memcpy(&hdr->jump, image_base + 512, + sizeof(struct setup_header) - offsetof(struct setup_header, jump)); /* * Fill out some of the header fields ourselves because the -- cgit v1.2.3 From 311eab8d5900ea9088513d4c6b4570058958edb5 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Fri, 12 Jun 2020 18:26:07 +0000 Subject: tty: serial: cpm_uart: Fix behaviour for non existing GPIOs devm_gpiod_get_index() doesn't return NULL but -ENOENT when the requested GPIO doesn't exist, leading to the following messages: [ 2.742468] gpiod_direction_input: invalid GPIO (errorpointer) [ 2.748147] can't set direction for gpio #2: -2 [ 2.753081] gpiod_direction_input: invalid GPIO (errorpointer) [ 2.758724] can't set direction for gpio #3: -2 [ 2.763666] gpiod_direction_output: invalid GPIO (errorpointer) [ 2.769394] can't set direction for gpio #4: -2 [ 2.774341] gpiod_direction_input: invalid GPIO (errorpointer) [ 2.779981] can't set direction for gpio #5: -2 [ 2.784545] ff000a20.serial: ttyCPM1 at MMIO 0xfff00a20 (irq = 39, base_baud = 8250000) is a CPM UART Use devm_gpiod_get_index_optional() instead. At the same time, handle the error case and properly exit with an error. Fixes: 97cbaf2c829b ("tty: serial: cpm_uart: Convert to use GPIO descriptors") Cc: stable@vger.kernel.org Cc: Linus Walleij Signed-off-by: Christophe Leroy Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/694a25fdce548c5ee8b060ef6a4b02746b8f25c0.1591986307.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/cpm_uart/cpm_uart_core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index a04f74d2e854..4df47d02b34b 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1215,7 +1215,12 @@ static int cpm_uart_init_port(struct device_node *np, pinfo->gpios[i] = NULL; - gpiod = devm_gpiod_get_index(dev, NULL, i, GPIOD_ASIS); + gpiod = devm_gpiod_get_index_optional(dev, NULL, i, GPIOD_ASIS); + + if (IS_ERR(gpiod)) { + ret = PTR_ERR(gpiod); + goto out_irq; + } if (gpiod) { if (i == GPIO_RTS || i == GPIO_DTR) @@ -1237,6 +1242,8 @@ static int cpm_uart_init_port(struct device_node *np, return cpm_uart_request_port(&pinfo->port); +out_irq: + irq_dispose_mapping(pinfo->port.irq); out_pram: cpm_uart_unmap_pram(pinfo, pram); out_mem: -- cgit v1.2.3 From a71725619ff63ccd41d5084094db53efc2286aae Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 15 Jun 2020 12:24:36 -0700 Subject: tty/serial: fix serial_core.c kernel-doc warnings Fix kernel-doc warnings in serial_core.c: ../drivers/tty/serial/serial_core.c:3300: warning: Function parameter or member 'port' not described in 'uart_get_rs485_mode' ../drivers/tty/serial/serial_core.c:3300: warning: Excess function parameter 'dev' description in 'uart_get_rs485_mode' ../drivers/tty/serial/serial_core.c:3300: warning: Excess function parameter 'rs485conf' description in 'uart_get_rs485_mode' Fixes: c150c0f362c1 ("serial: Allow uart_get_rs485_mode() to return errno") Signed-off-by: Randy Dunlap Cc: Lukas Wunner Cc: Heiko Stuebner Cc: Greg Kroah-Hartman Cc: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/e170db8e-5c8b-27ac-79a4-81b96ac0ca2d@infradead.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 57840cf90388..13fb92ae3710 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -3289,8 +3289,7 @@ EXPORT_SYMBOL(uart_remove_one_port); /** * uart_get_rs485_mode() - retrieve rs485 properties for given uart - * @dev: uart device - * @rs485conf: output parameter + * @port: uart device's target port * * This function implements the device tree binding described in * Documentation/devicetree/bindings/serial/rs485.txt. -- cgit v1.2.3 From 10652a9e9fe3fbcaca090f99cd3060ac3fee2913 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 Jun 2020 17:22:30 +0200 Subject: Revert "serial: core: Refactor uart_unlock_and_check_sysrq()" This reverts commit da9a5aa3402db0ff3b57216d8dbf2478e1046cae. In order to ease backporting a fix for a sysrq regression, revert this rewrite which was since added on top. The other sysrq helpers now bail out early when sysrq is not enabled; it's better to keep that pattern here as well. Note that the __releases() attribute won't be needed after the follow-on fix either. Fixes: da9a5aa3402d ("serial: core: Refactor uart_unlock_and_check_sysrq()") Cc: stable Signed-off-by: Johan Hovold Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20200610152232.16925-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 23 +++++++++++++---------- include/linux/serial_core.h | 3 ++- 2 files changed, 15 insertions(+), 11 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 13fb92ae3710..fcdb6bfbe2cf 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -3239,19 +3239,22 @@ int uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch) } EXPORT_SYMBOL_GPL(uart_prepare_sysrq_char); -void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long flags) -__releases(&port->lock) +void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags) { - if (port->has_sysrq) { - int sysrq_ch = port->sysrq_ch; + int sysrq_ch; - port->sysrq_ch = 0; - spin_unlock_irqrestore(&port->lock, flags); - if (sysrq_ch) - handle_sysrq(sysrq_ch); - } else { - spin_unlock_irqrestore(&port->lock, flags); + if (!port->has_sysrq) { + spin_unlock_irqrestore(&port->lock, irqflags); + return; } + + sysrq_ch = port->sysrq_ch; + port->sysrq_ch = 0; + + spin_unlock_irqrestore(&port->lock, irqflags); + + if (sysrq_ch) + handle_sysrq(sysrq_ch); } EXPORT_SYMBOL_GPL(uart_unlock_and_check_sysrq); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 9fd550e7946a..ef4921ddbe97 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -464,7 +464,8 @@ extern void uart_insert_char(struct uart_port *port, unsigned int status, extern int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch); extern int uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch); -extern void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long flags); +extern void uart_unlock_and_check_sysrq(struct uart_port *port, + unsigned long irqflags); extern int uart_handle_break(struct uart_port *port); /* -- cgit v1.2.3 From 08d5470308ac3598e7709d08b8979ce6e9de8da2 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 Jun 2020 17:22:31 +0200 Subject: serial: core: fix sysrq overhead regression Commit 8e20fc391711 ("serial_core: Move sysrq functions from header file") converted the inline sysrq helpers to exported functions which are now called for every received character, interrupt and break signal also on systems without CONFIG_MAGIC_SYSRQ_SERIAL instead of being optimised away by the compiler. Inlining these helpers again also avoids the function call overhead when CONFIG_MAGIC_SYSRQ_SERIAL is enabled (e.g. when the port is not used as a console). Fixes: 8e20fc391711 ("serial_core: Move sysrq functions from header file") Cc: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: Johan Hovold Cc: stable Reviewed-by: Andy Shevchenko Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/20200610152232.16925-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 99 +------------------------------------ include/linux/serial_core.h | 103 +++++++++++++++++++++++++++++++++++++-- 2 files changed, 100 insertions(+), 102 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index fcdb6bfbe2cf..abb102e71b14 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -41,8 +41,6 @@ static struct lock_class_key port_lock_key; #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) -#define SYSRQ_TIMEOUT (HZ * 5) - static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, struct ktermios *old_termios); static void uart_wait_until_sent(struct tty_struct *tty, int timeout); @@ -3163,7 +3161,7 @@ static DECLARE_WORK(sysrq_enable_work, uart_sysrq_on); * Returns false if @ch is out of enabling sequence and should be * handled some other way, true if @ch was consumed. */ -static bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch) +bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch) { int sysrq_toggle_seq_len = strlen(sysrq_toggle_seq); @@ -3186,102 +3184,9 @@ static bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch) port->sysrq = 0; return true; } -#else -static inline bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch) -{ - return false; -} +EXPORT_SYMBOL_GPL(uart_try_toggle_sysrq); #endif -int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) -{ - if (!IS_ENABLED(CONFIG_MAGIC_SYSRQ_SERIAL)) - return 0; - - if (!port->has_sysrq || !port->sysrq) - return 0; - - if (ch && time_before(jiffies, port->sysrq)) { - if (sysrq_mask()) { - handle_sysrq(ch); - port->sysrq = 0; - return 1; - } - if (uart_try_toggle_sysrq(port, ch)) - return 1; - } - port->sysrq = 0; - - return 0; -} -EXPORT_SYMBOL_GPL(uart_handle_sysrq_char); - -int uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch) -{ - if (!IS_ENABLED(CONFIG_MAGIC_SYSRQ_SERIAL)) - return 0; - - if (!port->has_sysrq || !port->sysrq) - return 0; - - if (ch && time_before(jiffies, port->sysrq)) { - if (sysrq_mask()) { - port->sysrq_ch = ch; - port->sysrq = 0; - return 1; - } - if (uart_try_toggle_sysrq(port, ch)) - return 1; - } - port->sysrq = 0; - - return 0; -} -EXPORT_SYMBOL_GPL(uart_prepare_sysrq_char); - -void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags) -{ - int sysrq_ch; - - if (!port->has_sysrq) { - spin_unlock_irqrestore(&port->lock, irqflags); - return; - } - - sysrq_ch = port->sysrq_ch; - port->sysrq_ch = 0; - - spin_unlock_irqrestore(&port->lock, irqflags); - - if (sysrq_ch) - handle_sysrq(sysrq_ch); -} -EXPORT_SYMBOL_GPL(uart_unlock_and_check_sysrq); - -/* - * We do the SysRQ and SAK checking like this... - */ -int uart_handle_break(struct uart_port *port) -{ - struct uart_state *state = port->state; - - if (port->handle_break) - port->handle_break(port); - - if (port->has_sysrq && uart_console(port)) { - if (!port->sysrq) { - port->sysrq = jiffies + SYSRQ_TIMEOUT; - return 1; - } - port->sysrq = 0; - } - - if (port->flags & UPF_SAK) - do_SAK(state->port.tty); - return 0; -} -EXPORT_SYMBOL_GPL(uart_handle_break); - EXPORT_SYMBOL(uart_write_wakeup); EXPORT_SYMBOL(uart_register_driver); EXPORT_SYMBOL(uart_unregister_driver); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index ef4921ddbe97..03fa7b967103 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -462,11 +462,104 @@ extern void uart_handle_cts_change(struct uart_port *uport, extern void uart_insert_char(struct uart_port *port, unsigned int status, unsigned int overrun, unsigned int ch, unsigned int flag); -extern int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch); -extern int uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch); -extern void uart_unlock_and_check_sysrq(struct uart_port *port, - unsigned long irqflags); -extern int uart_handle_break(struct uart_port *port); +#ifdef CONFIG_MAGIC_SYSRQ_SERIAL +#define SYSRQ_TIMEOUT (HZ * 5) + +bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch); + +static inline int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) +{ + if (!port->has_sysrq || !port->sysrq) + return 0; + + if (ch && time_before(jiffies, port->sysrq)) { + if (sysrq_mask()) { + handle_sysrq(ch); + port->sysrq = 0; + return 1; + } + if (uart_try_toggle_sysrq(port, ch)) + return 1; + } + port->sysrq = 0; + + return 0; +} + +static inline int uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch) +{ + if (!port->has_sysrq || !port->sysrq) + return 0; + + if (ch && time_before(jiffies, port->sysrq)) { + if (sysrq_mask()) { + port->sysrq_ch = ch; + port->sysrq = 0; + return 1; + } + if (uart_try_toggle_sysrq(port, ch)) + return 1; + } + port->sysrq = 0; + + return 0; +} + +static inline void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags) +{ + int sysrq_ch; + + if (!port->has_sysrq) { + spin_unlock_irqrestore(&port->lock, irqflags); + return; + } + + sysrq_ch = port->sysrq_ch; + port->sysrq_ch = 0; + + spin_unlock_irqrestore(&port->lock, irqflags); + + if (sysrq_ch) + handle_sysrq(sysrq_ch); +} +#else /* CONFIG_MAGIC_SYSRQ_SERIAL */ +static inline int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) +{ + return 0; +} +static inline int uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch) +{ + return 0; +} +static inline void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags) +{ + spin_unlock_irqrestore(&port->lock, irqflags); +} +#endif /* CONFIG_MAGIC_SYSRQ_SERIAL */ + +/* + * We do the SysRQ and SAK checking like this... + */ +static inline int uart_handle_break(struct uart_port *port) +{ + struct uart_state *state = port->state; + + if (port->handle_break) + port->handle_break(port); + +#ifdef CONFIG_MAGIC_SYSRQ_SERIAL + if (port->has_sysrq && uart_console(port)) { + if (!port->sysrq) { + port->sysrq = jiffies + SYSRQ_TIMEOUT; + return 1; + } + port->sysrq = 0; + } +#endif + if (port->flags & UPF_SAK) + do_SAK(state->port.tty); + return 0; +} /* * UART_ENABLE_MS - determine if port should enable modem status irqs -- cgit v1.2.3 From 225385657b7d81a99e17e04cd01f9ed5bb3109a8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 Jun 2020 17:22:32 +0200 Subject: serial: core: drop redundant sysrq checks The sysrq timestamp will never be set unless port->has_sysrq is set (see uart_handle_break()) so drop the redundant checks that were added by commit 1997e9dfdc84 ("serial_core: Un-ifdef sysrq SUPPORT_SYSRQ"). Signed-off-by: Johan Hovold Reviewed-by: Andy Shevchenko Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/20200610152232.16925-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 03fa7b967103..791f4844efeb 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -469,7 +469,7 @@ bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch); static inline int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) { - if (!port->has_sysrq || !port->sysrq) + if (!port->sysrq) return 0; if (ch && time_before(jiffies, port->sysrq)) { @@ -488,7 +488,7 @@ static inline int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch static inline int uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch) { - if (!port->has_sysrq || !port->sysrq) + if (!port->sysrq) return 0; if (ch && time_before(jiffies, port->sysrq)) { -- cgit v1.2.3 From 76ed2e105796710cf5b8a4ba43c81eceed948b70 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Thu, 18 Jun 2020 10:11:40 +0200 Subject: Revert "tty: xilinx_uartps: Fix missing id assignment to the console" This reverts commit 2ae11c46d5fdc46cb396e35911c713d271056d35. It turned out to break the ultra96-rev1, e.g., which uses uart1 as serial0 (and stdout-path = "serial0:115200n8"). Fixes: 2ae11c46d5fd ("tty: xilinx_uartps: Fix missing id assignment to the console") Cc: stable Signed-off-by: Jan Kiszka Reviewed-by: Michal Simek Tested-by: Michal Simek Link: https://lore.kernel.org/r/f4092727-d8f5-5f91-2c9f-76643aace993@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index b9d672af8b65..672cfa075e28 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1465,7 +1465,6 @@ static int cdns_uart_probe(struct platform_device *pdev) cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS; #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE cdns_uart_uart_driver.cons = &cdns_uart_console; - cdns_uart_console.index = id; #endif rc = uart_register_driver(&cdns_uart_uart_driver); -- cgit v1.2.3 From b6aa06de7757667bac88997a8807b143b8436035 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 29 Jun 2020 14:24:43 +0200 Subject: ASoC: qcom: Drop HAS_DMA dependency to fix link failure When building on allyesconfig kernel for a NO_DMA=y platform (e.g. Sun-3), CONFIG_SND_SOC_QCOM_COMMON=y, but CONFIG_SND_SOC_QDSP6_AFE=n, leading to a link failure: sound/soc/qcom/common.o: In function `qcom_snd_parse_of': common.c:(.text+0x2e2): undefined reference to `q6afe_is_rx_port' While SND_SOC_QDSP6 depends on HAS_DMA, SND_SOC_MSM8996 and SND_SOC_SDM845 don't, so the following warning is seen: WARNING: unmet direct dependencies detected for SND_SOC_QDSP6 Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && HAS_DMA [=n] Selected by [y]: - SND_SOC_MSM8996 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] - SND_SOC_SDM845 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && CROS_EC [=y] && I2C [=y] && SOUNDWIRE [=y] Until recently, this warning was harmless (from a compile-testing point-of-view), but the new user of q6afe_is_rx_port() turned this into a hard failure. As the QDSP6 driver itself builds fine if NO_DMA=y, and it depends on QCOM_APR (which in turns depends on ARCH_QCOM || COMPILE_TEST), it is safe to increase compile testing coverage. Hence fix the link failure by dropping the HAS_DMA dependency of SND_SOC_QDSP6. Fixes: a2120089251f1fe2 ("ASoC: qcom: common: set correct directions for dailinks") Fixes: 6b1687bf76ef84cb ("ASoC: qcom: add sdm845 sound card support") Fixes: a6f933f63f2ffdb2 ("ASoC: qcom: apq8096: Add db820c machine driver") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20200629122443.21736-1-geert@linux-m68k.org Signed-off-by: Mark Brown --- sound/soc/qcom/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index f51b28d1b94d..92f51d0e9fe2 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -72,7 +72,7 @@ config SND_SOC_QDSP6_ASM_DAI config SND_SOC_QDSP6 tristate "SoC ALSA audio driver for QDSP6" - depends on QCOM_APR && HAS_DMA + depends on QCOM_APR select SND_SOC_QDSP6_COMMON select SND_SOC_QDSP6_CORE select SND_SOC_QDSP6_AFE -- cgit v1.2.3 From b037d60a3b1d1227609fd858fa34321f41829911 Mon Sep 17 00:00:00 2001 From: Michał Mirosław Date: Wed, 24 Jun 2020 13:35:41 +0200 Subject: misc: atmel-ssc: lock with mutex instead of spinlock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Uninterruptible context is not needed in the driver and causes lockdep warning because of mutex taken in of_alias_get_id(). Convert the lock to mutex to avoid the issue. Cc: stable@vger.kernel.org Fixes: 099343c64e16 ("ARM: at91: atmel-ssc: add device tree support") Signed-off-by: Michał Mirosław Link: https://lore.kernel.org/r/50f0d7fa107f318296afb49477c3571e4d6978c5.1592998403.git.mirq-linux@rere.qmqm.pl Signed-off-by: Greg Kroah-Hartman --- drivers/misc/atmel-ssc.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index ab4144ea1f11..d6cd5537126c 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #include #include #include @@ -20,7 +20,7 @@ #include "../../sound/soc/atmel/atmel_ssc_dai.h" /* Serialize access to ssc_list and user count */ -static DEFINE_SPINLOCK(user_lock); +static DEFINE_MUTEX(user_lock); static LIST_HEAD(ssc_list); struct ssc_device *ssc_request(unsigned int ssc_num) @@ -28,7 +28,7 @@ struct ssc_device *ssc_request(unsigned int ssc_num) int ssc_valid = 0; struct ssc_device *ssc; - spin_lock(&user_lock); + mutex_lock(&user_lock); list_for_each_entry(ssc, &ssc_list, list) { if (ssc->pdev->dev.of_node) { if (of_alias_get_id(ssc->pdev->dev.of_node, "ssc") @@ -44,18 +44,18 @@ struct ssc_device *ssc_request(unsigned int ssc_num) } if (!ssc_valid) { - spin_unlock(&user_lock); + mutex_unlock(&user_lock); pr_err("ssc: ssc%d platform device is missing\n", ssc_num); return ERR_PTR(-ENODEV); } if (ssc->user) { - spin_unlock(&user_lock); + mutex_unlock(&user_lock); dev_dbg(&ssc->pdev->dev, "module busy\n"); return ERR_PTR(-EBUSY); } ssc->user++; - spin_unlock(&user_lock); + mutex_unlock(&user_lock); clk_prepare(ssc->clk); @@ -67,14 +67,14 @@ void ssc_free(struct ssc_device *ssc) { bool disable_clk = true; - spin_lock(&user_lock); + mutex_lock(&user_lock); if (ssc->user) ssc->user--; else { disable_clk = false; dev_dbg(&ssc->pdev->dev, "device already free\n"); } - spin_unlock(&user_lock); + mutex_unlock(&user_lock); if (disable_clk) clk_unprepare(ssc->clk); @@ -237,9 +237,9 @@ static int ssc_probe(struct platform_device *pdev) return -ENXIO; } - spin_lock(&user_lock); + mutex_lock(&user_lock); list_add_tail(&ssc->list, &ssc_list); - spin_unlock(&user_lock); + mutex_unlock(&user_lock); platform_set_drvdata(pdev, ssc); @@ -258,9 +258,9 @@ static int ssc_remove(struct platform_device *pdev) ssc_sound_dai_remove(ssc); - spin_lock(&user_lock); + mutex_lock(&user_lock); list_del(&ssc->list); - spin_unlock(&user_lock); + mutex_unlock(&user_lock); return 0; } -- cgit v1.2.3 From e852c2c251ed9c23ae6e3efebc5ec49adb504207 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Mon, 29 Jun 2020 01:53:59 +0300 Subject: mei: bus: don't clean driver pointer It's not needed to set driver to NULL in mei_cl_device_remove() which is bus_type remove() handler as this is done anyway in __device_release_driver(). Actually this is causing an endless loop in driver_detach() on ubuntu patched kernel, while removing (rmmod) the mei_hdcp module. The reason list_empty(&drv->p->klist_devices.k_list) is always not-empty. as the check is always true in __device_release_driver() if (dev->driver != drv) return; The non upstream patch is causing this behavior, titled: 'vfio -- release device lock before userspace requests' Nevertheless the fix is correct also for the upstream. Link: https://patchwork.ozlabs.org/project/ubuntu-kernel/patch/20180912085046.3401-2-apw@canonical.com/ Cc: Cc: Andy Whitcroft Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20200628225359.2185929-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 8d468e0a950a..f476dbc7252b 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -745,9 +745,8 @@ static int mei_cl_device_remove(struct device *dev) mei_cl_bus_module_put(cldev); module_put(THIS_MODULE); - dev->driver = NULL; - return ret; + return ret; } static ssize_t name_show(struct device *dev, struct device_attribute *a, -- cgit v1.2.3 From 412847fb47336c58885ac6231a5f34ac7ac862a0 Mon Sep 17 00:00:00 2001 From: Lukas Bulwahn Date: Sun, 28 Jun 2020 20:02:29 +0200 Subject: MAINTAINERS: remove obsolete entry after file renaming Commit f16861b12fa0 ("regulator: rename da903x to da903x-regulator") missed to adjust the DIALOG SEMICONDUCTOR DRIVERS section in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: drivers/regulator/da903x.c The da903x-regulator.c file is already covered by the pattern drivers/regulator/da9???-regulator.[ch] in the section. So, simply remove the non-matching file entry in MAINTAINERS. Signed-off-by: Lukas Bulwahn Link: https://lore.kernel.org/r/20200628180229.5068-1-lukas.bulwahn@gmail.com Signed-off-by: Mark Brown --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 68f21d46614c..94f8d897b0d9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5021,7 +5021,6 @@ F: drivers/mfd/da91??-*.c F: drivers/pinctrl/pinctrl-da90??.c F: drivers/power/supply/da9052-battery.c F: drivers/power/supply/da91??-*.c -F: drivers/regulator/da903x.c F: drivers/regulator/da9???-regulator.[ch] F: drivers/regulator/slg51000-regulator.[ch] F: drivers/rtc/rtc-da90??.c -- cgit v1.2.3 From 0ceb8a36d023d4bb4ffca3474a452fb1dfaa0ef2 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 28 Jun 2020 17:52:26 +0200 Subject: ASoC: Intel: cht_bsw_rt5672: Change bus format to I2S 2 channel The default mode for SSP configuration is TDM 4 slot and so far we were using this for the bus format on cht-bsw-rt56732 boards. One board, the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The second piggy-backed, output-only codec is inside the keyboard-dock (which has extra speakers). Unlike the main rt5672 codec, we cannot configure this codec, it is hard coded to use 2 channel 24 bit I2S. Using 4 channel TDM leads to the dock speakers codec (which listens in on the data send from the SSP to the rt5672 codec) emiting horribly distorted sound. Since we only support 2 channels anyways, there is no need for TDM on any cht-bsw-rt5672 designs. So we can simply use I2S 2ch everywhere. This commit fixes the Lenovo Miix 2 10 dock speakers issue by changing the bus format set in cht_codec_fixup() to I2S 2 channel. This change has been tested on the following devices with a rt5672 codec: Lenovo Miix 2 10 Lenovo Thinkpad 8 Lenovo Thinkpad 10 (gen 1) Signed-off-by: Hans de Goede Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723 Link: https://lore.kernel.org/r/20200628155231.71089-2-hdegoede@redhat.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/cht_bsw_rt5672.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c index 7a43c70a1378..22e432768edb 100644 --- a/sound/soc/intel/boards/cht_bsw_rt5672.c +++ b/sound/soc/intel/boards/cht_bsw_rt5672.c @@ -253,21 +253,20 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd, params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); /* - * Default mode for SSP configuration is TDM 4 slot + * Default mode for SSP configuration is TDM 4 slot. One board/design, + * the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The + * second piggy-backed, output-only codec is inside the keyboard-dock + * (which has extra speakers). Unlike the main rt5672 codec, we cannot + * configure this codec, it is hard coded to use 2 channel 24 bit I2S. + * Since we only support 2 channels anyways, there is no need for TDM + * on any cht-bsw-rt5672 designs. So we simply use I2S 2ch everywhere. */ - ret = snd_soc_dai_set_fmt(asoc_rtd_to_codec(rtd, 0), - SND_SOC_DAIFMT_DSP_B | - SND_SOC_DAIFMT_IB_NF | + ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); if (ret < 0) { - dev_err(rtd->dev, "can't set format to TDM %d\n", ret); - return ret; - } - - /* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */ - ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_codec(rtd, 0), 0xF, 0xF, 4, 24); - if (ret < 0) { - dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret); + dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); return ret; } -- cgit v1.2.3 From 5cacc6f5764e94fa753b2c1f5f7f1f3f74286e82 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 28 Jun 2020 17:52:27 +0200 Subject: ASoC: rt5670: Correct RT5670_LDO_SEL_MASK The RT5670_PWR_ANLG1 register has 3 bits to select the LDO voltage, so the correct mask is 0x7 not 0x3. Because of this wrong mask we were programming the ldo bits to a setting of binary 001 (0x05 & 0x03) instead of binary 101 when moving to SND_SOC_BIAS_PREPARE. According to the datasheet 001 is a reserved value, so no idea what it did, since the driver was working fine before I guess we got lucky and it does something which is ok. Fixes: 5e8351de740d ("ASoC: add RT5670 CODEC driver") Signed-off-by: Hans de Goede Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200628155231.71089-3-hdegoede@redhat.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt5670.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt5670.h b/sound/soc/codecs/rt5670.h index a8c3e44770b8..de0203369b7c 100644 --- a/sound/soc/codecs/rt5670.h +++ b/sound/soc/codecs/rt5670.h @@ -757,7 +757,7 @@ #define RT5670_PWR_VREF2_BIT 4 #define RT5670_PWR_FV2 (0x1 << 3) #define RT5670_PWR_FV2_BIT 3 -#define RT5670_LDO_SEL_MASK (0x3) +#define RT5670_LDO_SEL_MASK (0x7) #define RT5670_LDO_SEL_SFT 0 /* Power Management for Analog 2 (0x64) */ -- cgit v1.2.3 From 85ca6b17e2bb96b19caac3b02c003d670b66de96 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 28 Jun 2020 17:52:28 +0200 Subject: ASoC: rt5670: Add new gpio1_is_ext_spk_en quirk and enable it on the Lenovo Miix 2 10 The Lenovo Miix 2 10 has a keyboard dock with extra speakers in the dock. Rather then the ACL5672's GPIO1 pin being used as IRQ to the CPU, it is actually used to enable the amplifier for these speakers (the IRQ to the CPU comes directly from the jack-detect switch). Add a quirk for having an ext speaker-amplifier enable pin on GPIO1 and replace the Lenovo Miix 2 10's dmi_system_id table entry's wrong GPIO_DEV quirk (which needs to be renamed to GPIO1_IS_IRQ) with the new RT5670_GPIO1_IS_EXT_SPK_EN quirk, so that we enable the external speaker-amplifier as necessary. Also update the ident field for the dmi_system_id table entry, the Miix models are not Thinkpads. Fixes: 67e03ff3f32f ("ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirk") Signed-off-by: Hans de Goede BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723 Link: https://lore.kernel.org/r/20200628155231.71089-4-hdegoede@redhat.com Signed-off-by: Mark Brown --- include/sound/rt5670.h | 1 + sound/soc/codecs/rt5670.c | 71 +++++++++++++++++++++++++++++++++++++---------- 2 files changed, 57 insertions(+), 15 deletions(-) diff --git a/include/sound/rt5670.h b/include/sound/rt5670.h index f9024c7a1600..02e1d7778354 100644 --- a/include/sound/rt5670.h +++ b/include/sound/rt5670.h @@ -12,6 +12,7 @@ struct rt5670_platform_data { int jd_mode; bool in2_diff; bool dev_gpio; + bool gpio1_is_ext_spk_en; bool dmic_en; unsigned int dmic1_data_pin; diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c index 70fee6849ab0..f21181734170 100644 --- a/sound/soc/codecs/rt5670.c +++ b/sound/soc/codecs/rt5670.c @@ -31,18 +31,19 @@ #include "rt5670.h" #include "rt5670-dsp.h" -#define RT5670_DEV_GPIO BIT(0) -#define RT5670_IN2_DIFF BIT(1) -#define RT5670_DMIC_EN BIT(2) -#define RT5670_DMIC1_IN2P BIT(3) -#define RT5670_DMIC1_GPIO6 BIT(4) -#define RT5670_DMIC1_GPIO7 BIT(5) -#define RT5670_DMIC2_INR BIT(6) -#define RT5670_DMIC2_GPIO8 BIT(7) -#define RT5670_DMIC3_GPIO5 BIT(8) -#define RT5670_JD_MODE1 BIT(9) -#define RT5670_JD_MODE2 BIT(10) -#define RT5670_JD_MODE3 BIT(11) +#define RT5670_DEV_GPIO BIT(0) +#define RT5670_IN2_DIFF BIT(1) +#define RT5670_DMIC_EN BIT(2) +#define RT5670_DMIC1_IN2P BIT(3) +#define RT5670_DMIC1_GPIO6 BIT(4) +#define RT5670_DMIC1_GPIO7 BIT(5) +#define RT5670_DMIC2_INR BIT(6) +#define RT5670_DMIC2_GPIO8 BIT(7) +#define RT5670_DMIC3_GPIO5 BIT(8) +#define RT5670_JD_MODE1 BIT(9) +#define RT5670_JD_MODE2 BIT(10) +#define RT5670_JD_MODE3 BIT(11) +#define RT5670_GPIO1_IS_EXT_SPK_EN BIT(12) static unsigned long rt5670_quirk; static unsigned int quirk_override; @@ -1447,6 +1448,33 @@ static int rt5670_hp_event(struct snd_soc_dapm_widget *w, return 0; } +static int rt5670_spk_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct rt5670_priv *rt5670 = snd_soc_component_get_drvdata(component); + + if (!rt5670->pdata.gpio1_is_ext_spk_en) + return 0; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + regmap_update_bits(rt5670->regmap, RT5670_GPIO_CTRL2, + RT5670_GP1_OUT_MASK, RT5670_GP1_OUT_HI); + break; + + case SND_SOC_DAPM_PRE_PMD: + regmap_update_bits(rt5670->regmap, RT5670_GPIO_CTRL2, + RT5670_GP1_OUT_MASK, RT5670_GP1_OUT_LO); + break; + + default: + return 0; + } + + return 0; +} + static int rt5670_bst1_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -1860,7 +1888,9 @@ static const struct snd_soc_dapm_widget rt5670_specific_dapm_widgets[] = { }; static const struct snd_soc_dapm_widget rt5672_specific_dapm_widgets[] = { - SND_SOC_DAPM_PGA("SPO Amp", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA_E("SPO Amp", SND_SOC_NOPM, 0, 0, NULL, 0, + rt5670_spk_event, SND_SOC_DAPM_PRE_PMD | + SND_SOC_DAPM_POST_PMU), SND_SOC_DAPM_OUTPUT("SPOLP"), SND_SOC_DAPM_OUTPUT("SPOLN"), SND_SOC_DAPM_OUTPUT("SPORP"), @@ -2857,14 +2887,14 @@ static const struct dmi_system_id dmi_platform_intel_quirks[] = { }, { .callback = rt5670_quirk_cb, - .ident = "Lenovo Thinkpad Tablet 10", + .ident = "Lenovo Miix 2 10", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Miix 2 10"), }, .driver_data = (unsigned long *)(RT5670_DMIC_EN | RT5670_DMIC1_IN2P | - RT5670_DEV_GPIO | + RT5670_GPIO1_IS_EXT_SPK_EN | RT5670_JD_MODE2), }, { @@ -2924,6 +2954,10 @@ static int rt5670_i2c_probe(struct i2c_client *i2c, rt5670->pdata.dev_gpio = true; dev_info(&i2c->dev, "quirk dev_gpio\n"); } + if (rt5670_quirk & RT5670_GPIO1_IS_EXT_SPK_EN) { + rt5670->pdata.gpio1_is_ext_spk_en = true; + dev_info(&i2c->dev, "quirk GPIO1 is external speaker enable\n"); + } if (rt5670_quirk & RT5670_IN2_DIFF) { rt5670->pdata.in2_diff = true; dev_info(&i2c->dev, "quirk IN2_DIFF\n"); @@ -3023,6 +3057,13 @@ static int rt5670_i2c_probe(struct i2c_client *i2c, RT5670_GP1_PF_MASK, RT5670_GP1_PF_OUT); } + if (rt5670->pdata.gpio1_is_ext_spk_en) { + regmap_update_bits(rt5670->regmap, RT5670_GPIO_CTRL1, + RT5670_GP1_PIN_MASK, RT5670_GP1_PIN_GPIO1); + regmap_update_bits(rt5670->regmap, RT5670_GPIO_CTRL2, + RT5670_GP1_PF_MASK, RT5670_GP1_PF_OUT); + } + if (rt5670->pdata.jd_mode) { regmap_update_bits(rt5670->regmap, RT5670_GLB_CLK, RT5670_SCLK_SRC_MASK, RT5670_SCLK_SRC_RCCLK); -- cgit v1.2.3 From 3f31f7d9b5404a10648abe536c8b408bfb4502e1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 28 Jun 2020 17:52:29 +0200 Subject: ASoC: rt5670: Fix dac- and adc- vol-tlv values being off by a factor of 10 The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB, not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace apps which translate the dB scale to a linear scale. With the logarithmic dB scale being of by a factor of 10 we loose all precision in the lower area of the range when apps translate things to a linear scale. E.g. the 0 dB default, which corresponds with a value of 47 of the 0 - 127 range for the control, would be shown as 0/100 in alsa-mixer. Since the centi-dB values used in the TLV struct cannot represent the 0.375 dB step size used by these controls, change the TLV definition for them to specify a min and max value instead of min + stepsize. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200628155231.71089-5-hdegoede@redhat.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt5670.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c index f21181734170..dfbc0ca38ff7 100644 --- a/sound/soc/codecs/rt5670.c +++ b/sound/soc/codecs/rt5670.c @@ -603,9 +603,9 @@ int rt5670_set_jack_detect(struct snd_soc_component *component, EXPORT_SYMBOL_GPL(rt5670_set_jack_detect); static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0); -static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0); +static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -6562, 0); static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0); -static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0); +static const DECLARE_TLV_DB_MINMAX(adc_vol_tlv, -1762, 3000); static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0); /* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */ -- cgit v1.2.3 From d16d0481e6bab5a916450e4ef0e1c958b550880c Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Tue, 9 Jun 2020 08:13:18 +0000 Subject: soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's Correct the SoC revision and package bits/mask values for S905D3/X3 to detect a wider range of observed SoC IDs, and tweak sort order for A311D/S922X. S905X3 05 0000 0101 (SEI610 initial devices) S905X3 10 0001 0000 (ODROID-C4 and recent Android boxes) S905X3 50 0101 0000 (SEI610 later revisions) S905D3 04 0000 0100 (VIM3L devices in kernelci) S905D3 b0 1011 0000 (VIM3L initial production) Fixes commit c9cc9bec36d0 ("soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs") Suggested-by: Neil Armstrong Signed-off-by: Christian Hewitt Signed-off-by: Kevin Hilman Acked-by: Neil Armstrong Link: https://lore.kernel.org/r/20200609081318.28023-1-christianshewitt@gmail.com --- drivers/soc/amlogic/meson-gx-socinfo.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c index 01fc0d20a70d..6f54bd832c8b 100644 --- a/drivers/soc/amlogic/meson-gx-socinfo.c +++ b/drivers/soc/amlogic/meson-gx-socinfo.c @@ -66,10 +66,12 @@ static const struct meson_gx_package_id { { "A113D", 0x25, 0x22, 0xff }, { "S905D2", 0x28, 0x10, 0xf0 }, { "S905X2", 0x28, 0x40, 0xf0 }, - { "S922X", 0x29, 0x40, 0xf0 }, { "A311D", 0x29, 0x10, 0xf0 }, - { "S905X3", 0x2b, 0x5, 0xf }, - { "S905D3", 0x2b, 0xb0, 0xf0 }, + { "S922X", 0x29, 0x40, 0xf0 }, + { "S905D3", 0x2b, 0x4, 0xf5 }, + { "S905X3", 0x2b, 0x5, 0xf5 }, + { "S905X3", 0x2b, 0x10, 0x3f }, + { "S905D3", 0x2b, 0x30, 0x3f }, { "A113L", 0x2c, 0x0, 0xf8 }, }; -- cgit v1.2.3 From 95ca6f06dd4827ff63be5154120c7a8511cd9a41 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 17 Jun 2020 14:53:46 +0200 Subject: arm64: dts: meson: add missing gxl rng clock The peripheral clock of the RNG is missing for gxl while it is present for gxbb. Fixes: 1b3f6d148692 ("ARM64: dts: meson-gx: add clock CLKID_RNG0 to hwrng node") Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20200617125346.1163527-1-jbrunet@baylibre.com --- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index fc59c8534c0f..6c8b189884ca 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -337,6 +337,11 @@ }; }; +&hwrng { + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; +}; + &i2c_A { clocks = <&clkc CLKID_I2C>; }; -- cgit v1.2.3 From b2037dafcf082cd24b88ae9283af628235df36e1 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 18 Jun 2020 15:27:37 +0200 Subject: arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency When starting at 744MHz, the Mali 450 core crashes on S805X based boards: lima d00c0000.gpu: IRQ ppmmu3 not found lima d00c0000.gpu: IRQ ppmmu4 not found lima d00c0000.gpu: IRQ ppmmu5 not found lima d00c0000.gpu: IRQ ppmmu6 not found lima d00c0000.gpu: IRQ ppmmu7 not found Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.2+ #492 Hardware name: Libre Computer AML-S805X-AC (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : lima_gp_init+0x28/0x188 ... Call trace: lima_gp_init+0x28/0x188 lima_device_init+0x334/0x534 lima_pdev_probe+0xa4/0xe4 ... Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Reverting to a safer 666Mhz frequency on the S805X that doesn't use the GP0 PLL makes it more stable. Fixes: fd47716479f5 ("ARM64: dts: add S805X based P241 board") Fixes: 0449b8e371ac ("arm64: dts: meson: add libretech aml-s805x-ac board") Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20200618132737.14243-1-narmstrong@baylibre.com --- .../dts/amlogic/meson-gxl-s805x-libretech-ac.dts | 2 +- .../boot/dts/amlogic/meson-gxl-s805x-p241.dts | 2 +- arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi | 24 ++++++++++++++++++++++ 3 files changed, 26 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts index 6a226faab183..9e43f4dca90d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -10,7 +10,7 @@ #include #include -#include "meson-gxl-s905x.dtsi" +#include "meson-gxl-s805x.dtsi" / { compatible = "libretech,aml-s805x-ac", "amlogic,s805x", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts index 867e30f1d62b..eb7f5a3fefd4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -9,7 +9,7 @@ #include -#include "meson-gxl-s905x.dtsi" +#include "meson-gxl-s805x.dtsi" / { compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi new file mode 100644 index 000000000000..f9d705648426 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 BayLibre SAS + * Author: Neil Armstrong + */ + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "amlogic,s805x", "amlogic,meson-gxl"; +}; + +/* The S805X Package doesn't seem to handle the 744MHz OPP correctly */ +&mali { + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>; /* Do Nothing */ +}; -- cgit v1.2.3 From 54320dcaa2522db3222c02d68b52cfed32a2e95b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 26 Jun 2020 10:06:26 +0200 Subject: ARM: dts: meson: Align L2 cache-controller nodename with dtschema Fix dtschema validator warnings like: l2-cache-controller@c4200000: $nodename:0: 'l2-cache-controller@c4200000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kevin Hilman Reviewed-by: Martin Blumenstingl Link: https://lore.kernel.org/r/20200626080626.4080-1-krzk@kernel.org --- arch/arm/boot/dts/meson.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index ae89deaa8c9c..91129dc70d83 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -11,7 +11,7 @@ #size-cells = <1>; interrupt-parent = <&gic>; - L2: l2-cache-controller@c4200000 { + L2: cache-controller@c4200000 { compatible = "arm,pl310-cache"; reg = <0xc4200000 0x1000>; cache-unified; -- cgit v1.2.3 From 5aee52c44d9170591df65fafa1cd408acc1225ce Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Sat, 27 Jun 2020 06:32:42 -0700 Subject: scsi: scsi_transport_spi: Fix function pointer check clang static analysis flags several null function pointer problems. drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage] spi_transport_max_attr(offset, "%d\n"); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reviewing the store_spi_store_max macro if (i->f->set_##field) return -EINVAL; should be if (!i->f->set_##field) return -EINVAL; Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.com Reviewed-by: James Bottomley Signed-off-by: Tom Rix Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index f8661062ef95..f3d5b1bbd5aa 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -339,7 +339,7 @@ store_spi_transport_##field(struct device *dev, \ struct spi_transport_attrs *tp \ = (struct spi_transport_attrs *)&starget->starget_data; \ \ - if (i->f->set_##field) \ + if (!i->f->set_##field) \ return -EINVAL; \ val = simple_strtoul(buf, NULL, 0); \ if (val > tp->max_##field) \ -- cgit v1.2.3 From bc8784f348836ab8967e6116486c5079c7025999 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 28 Jun 2020 20:08:43 +0200 Subject: iommu/sun50i: Change the readl timeout to the atomic variant The flush_all_tlb call back can be called from an atomic context, so using readl_poll_timeout that embeds a udelay doesn't work. Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver") Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200628180844.79205-1-maxime@cerno.tech Signed-off-by: Joerg Roedel --- drivers/iommu/sun50i-iommu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/sun50i-iommu.c b/drivers/iommu/sun50i-iommu.c index fce605e96aa2..a1563b54c743 100644 --- a/drivers/iommu/sun50i-iommu.c +++ b/drivers/iommu/sun50i-iommu.c @@ -313,9 +313,9 @@ static int sun50i_iommu_flush_all_tlb(struct sun50i_iommu *iommu) IOMMU_TLB_FLUSH_MICRO_TLB(1) | IOMMU_TLB_FLUSH_MICRO_TLB(0)); - ret = readl_poll_timeout(iommu->base + IOMMU_TLB_FLUSH_REG, - reg, !reg, - 1, 2000); + ret = readl_poll_timeout_atomic(iommu->base + IOMMU_TLB_FLUSH_REG, + reg, !reg, + 1, 2000); if (ret) dev_warn(iommu->dev, "TLB Flush timed out!\n"); -- cgit v1.2.3 From ce0fd3892bfafca7cd352638ba84e8c17658b803 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 28 Jun 2020 20:08:44 +0200 Subject: iommu/sun50i: Remove unused variable The pte_dma variable in the unmap callback is set but never used. Remove it. Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver") Reported-by: kernel test robot Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200628180844.79205-2-maxime@cerno.tech Signed-off-by: Joerg Roedel --- drivers/iommu/sun50i-iommu.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/iommu/sun50i-iommu.c b/drivers/iommu/sun50i-iommu.c index a1563b54c743..3b1bf2fb94f5 100644 --- a/drivers/iommu/sun50i-iommu.c +++ b/drivers/iommu/sun50i-iommu.c @@ -556,7 +556,6 @@ static size_t sun50i_iommu_unmap(struct iommu_domain *domain, unsigned long iova { struct sun50i_iommu_domain *sun50i_domain = to_sun50i_domain(domain); phys_addr_t pt_phys; - dma_addr_t pte_dma; u32 *pte_addr; u32 dte; @@ -566,7 +565,6 @@ static size_t sun50i_iommu_unmap(struct iommu_domain *domain, unsigned long iova pt_phys = sun50i_dte_get_pt_address(dte); pte_addr = (u32 *)phys_to_virt(pt_phys) + sun50i_iova_get_pte_index(iova); - pte_dma = pt_phys + sun50i_iova_get_pte_index(iova) * PT_ENTRY_SIZE; if (!sun50i_pte_is_page_valid(*pte_addr)) return 0; -- cgit v1.2.3 From c7451e495b2abfc35b2bb4347c8d0aaa7699df26 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 29 Jun 2020 14:11:46 +0200 Subject: iommu: SUN50I_IOMMU should depend on HAS_DMA If NO_DMA=y (e.g. Sun-3 all{mod,yes}-config): drivers/iommu/dma-iommu.o: In function `iommu_dma_mmap': dma-iommu.c:(.text+0x92e): undefined reference to `dma_pgprot' IOMMU_DMA must not be selected, unless HAS_DMA=y. Hence fix this by making SUN50I_IOMMU depend on HAS_DMA. Fixes: 4100b8c229b32835 ("iommu: Add Allwinner H6 IOMMU driver") Signed-off-by: Geert Uytterhoeven Acked-by: Maxime Ripard Link: https://lore.kernel.org/r/20200629121146.24011-1-geert@linux-m68k.org Signed-off-by: Joerg Roedel --- drivers/iommu/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index 6dc49ed8377a..b0f308cb7f7c 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -305,6 +305,7 @@ config ROCKCHIP_IOMMU config SUN50I_IOMMU bool "Allwinner H6 IOMMU Support" + depends on HAS_DMA depends on ARCH_SUNXI || COMPILE_TEST select ARM_DMA_USE_IOMMU select IOMMU_API -- cgit v1.2.3 From e7fc23838ebbdbb227c8d45fe02904d0d67a0540 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 30 Jun 2020 14:46:11 +0200 Subject: iommu/amd: Make amd_iommu_apply_ivrs_quirks() static inline At least the version in the header file to fix a compile warning about the function being unused. Reported-by: Borislav Petkov Signed-off-by: Joerg Roedel Link: https://lore.kernel.org/r/20200630124611.23153-1-joro@8bytes.org --- drivers/iommu/amd/amd_iommu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/amd/amd_iommu.h b/drivers/iommu/amd/amd_iommu.h index f892992c8744..57309716fd18 100644 --- a/drivers/iommu/amd/amd_iommu.h +++ b/drivers/iommu/amd/amd_iommu.h @@ -102,7 +102,7 @@ extern int __init add_special_device(u8 type, u8 id, u16 *devid, #ifdef CONFIG_DMI void amd_iommu_apply_ivrs_quirks(void); #else -static void amd_iommu_apply_ivrs_quirks(void) { } +static inline void amd_iommu_apply_ivrs_quirks(void) { } #endif #endif -- cgit v1.2.3 From c463bb2a8f8d7d97aa414bf7714fc77e9d3b10df Mon Sep 17 00:00:00 2001 From: Merlijn Wajer Date: Tue, 30 Jun 2020 11:47:04 -0700 Subject: Input: add `SW_MACHINE_COVER` This event code represents the state of a removable cover of a device. Value 0 means that the cover is open or removed, value 1 means that the cover is closed. Reviewed-by: Sebastian Reichel Acked-by: Tony Lindgren Signed-off-by: Merlijn Wajer Link: https://lore.kernel.org/r/20200612125402.18393-2-merlijn@wizzup.org Signed-off-by: Dmitry Torokhov --- include/linux/mod_devicetable.h | 2 +- include/uapi/linux/input-event-codes.h | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index e3596db077dc..04a19e30b168 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -318,7 +318,7 @@ struct pcmcia_device_id { #define INPUT_DEVICE_ID_LED_MAX 0x0f #define INPUT_DEVICE_ID_SND_MAX 0x07 #define INPUT_DEVICE_ID_FF_MAX 0x7f -#define INPUT_DEVICE_ID_SW_MAX 0x0f +#define INPUT_DEVICE_ID_SW_MAX 0x10 #define INPUT_DEVICE_ID_PROP_MAX 0x1f #define INPUT_DEVICE_ID_MATCH_BUS 1 diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index b6a835d37826..0c2e27d28e0a 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -888,7 +888,8 @@ #define SW_LINEIN_INSERT 0x0d /* set = inserted */ #define SW_MUTE_DEVICE 0x0e /* set = device disabled */ #define SW_PEN_INSERTED 0x0f /* set = pen inserted */ -#define SW_MAX 0x0f +#define SW_MACHINE_COVER 0x10 /* set = cover closed */ +#define SW_MAX 0x10 #define SW_CNT (SW_MAX+1) /* -- cgit v1.2.3 From ed3e98e919aaaa47e9d9f8a40c3f6f4a22577842 Mon Sep 17 00:00:00 2001 From: Merlijn Wajer Date: Tue, 30 Jun 2020 11:47:40 -0700 Subject: ARM: dts: n900: remove mmc1 card detect gpio Instead, expose the key via the input framework, as SW_MACHINE_COVER The chip-detect GPIO is actually detecting if the cover is closed. Technically it's possible to use the SD card with open cover. The only downside is risk of battery falling out and user being able to physically remove the card. The behaviour of SD card not being available when the device is open is unexpected and creates more problems than it solves. There is a high chance, that more people accidentally break their rootfs by opening the case without physically removing the card. Reviewed-by: Sebastian Reichel Acked-by: Tony Lindgren Signed-off-by: Merlijn Wajer Link: https://lore.kernel.org/r/20200612125402.18393-3-merlijn@wizzup.org Signed-off-by: Dmitry Torokhov --- arch/arm/boot/dts/omap3-n900.dts | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4089d97405c9..3dbcae3d60d2 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -105,6 +105,14 @@ linux,code = ; linux,can-disable; }; + + machine_cover { + label = "Machine Cover"; + gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; }; isp1707: isp1707 { @@ -819,10 +827,6 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; bus-width = <4>; - /* For debugging, it is often good idea to remove this GPIO. - It means you can remove back cover (to reboot by removing - battery) and still use the MMC card. */ - cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ }; /* most boards use vaux3, only some old versions use vmmc2 instead */ -- cgit v1.2.3 From bc4be656471b39af8f2ad57ee372012c55da1da7 Mon Sep 17 00:00:00 2001 From: Oder Chiou Date: Wed, 1 Jul 2020 15:16:45 +0800 Subject: ASoC: rt5682: cancel jack_detect_work if hs_jack is set to null even soundwire mode Base on https://patchwork.kernel.org/patch/11237953/ Soundwire mode also should follow it. Signed-off-by: Oder Chiou Link: https://lore.kernel.org/r/20200701071645.32061-1-oder_chiou@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt5682.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index 7d6670abdb08..dd741835e4d0 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -992,16 +992,17 @@ static int rt5682_set_jack_detect(struct snd_soc_component *component, rt5682->hs_jack = hs_jack; - if (!rt5682->is_sdw) { - if (!hs_jack) { - regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2, - RT5682_JD1_EN_MASK, RT5682_JD1_DIS); - regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL, - RT5682_POW_JDH | RT5682_POW_JDL, 0); - cancel_delayed_work_sync(&rt5682->jack_detect_work); - return 0; - } + if (!hs_jack) { + regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2, + RT5682_JD1_EN_MASK, RT5682_JD1_DIS); + regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL, + RT5682_POW_JDH | RT5682_POW_JDL, 0); + cancel_delayed_work_sync(&rt5682->jack_detect_work); + return 0; + } + + if (!rt5682->is_sdw) { switch (rt5682->pdata.jd_src) { case RT5682_JD1: snd_soc_component_update_bits(component, -- cgit v1.2.3 From ad922ca199b38974dbe392e2faeba3aadf461ac2 Mon Sep 17 00:00:00 2001 From: Ravulapati Vishnu vardhan rao Date: Tue, 30 Jun 2020 14:52:38 +0530 Subject: ASoC: amd: Rectifying Unbalanced pm_runtime_enable! issue When snd_pci_acp3x driver loads we see: WARNING kernel:snd_pci_acp3x 0000:04:00.5: Unbalanced pm_runtime_enable! at boot time. same can be observed in /var/log/messages/. Modifying pm runtime sequence for fixing unbalanced pm issue. Signed-off-by: Ravulapati Vishnu vardhan rao Link: https://lore.kernel.org/r/20200630092242.7799-1-Vishnuvardhanrao.Ravulapati@amd.com Signed-off-by: Mark Brown --- sound/soc/amd/raven/pci-acp3x.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/soc/amd/raven/pci-acp3x.c b/sound/soc/amd/raven/pci-acp3x.c index f25ce50f1a90..ebf4388b6262 100644 --- a/sound/soc/amd/raven/pci-acp3x.c +++ b/sound/soc/amd/raven/pci-acp3x.c @@ -232,9 +232,7 @@ static int snd_acp3x_probe(struct pci_dev *pci, } pm_runtime_set_autosuspend_delay(&pci->dev, 2000); pm_runtime_use_autosuspend(&pci->dev); - pm_runtime_set_active(&pci->dev); pm_runtime_put_noidle(&pci->dev); - pm_runtime_enable(&pci->dev); pm_runtime_allow(&pci->dev); return 0; @@ -303,7 +301,7 @@ static void snd_acp3x_remove(struct pci_dev *pci) ret = acp3x_deinit(adata->acp3x_base); if (ret) dev_err(&pci->dev, "ACP de-init failed\n"); - pm_runtime_disable(&pci->dev); + pm_runtime_forbid(&pci->dev); pm_runtime_get_noresume(&pci->dev); pci_disable_msi(pci); pci_release_regions(pci); -- cgit v1.2.3 From 1eb96c198aff13162de4857e19f9488d59c4acb1 Mon Sep 17 00:00:00 2001 From: Yu-Hsuan Hsu Date: Tue, 30 Jun 2020 17:16:15 +0800 Subject: ASoC: rockchip: add format and rate constraints on rk3399 S8 and S24 formats does not work on this machine driver so force to use S16_LE instead. In addition, add constraint to limit the max value of rate because the rate higher than 96000(172000, 192000) is not stable either. Signed-off-by: Yu-Hsuan Hsu Link: https://lore.kernel.org/r/20200630091615.4020059-1-yuhsuan@chromium.org Signed-off-by: Mark Brown --- sound/soc/rockchip/rk3399_gru_sound.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/soc/rockchip/rk3399_gru_sound.c b/sound/soc/rockchip/rk3399_gru_sound.c index f45e5aaa4b30..9539b0d024fe 100644 --- a/sound/soc/rockchip/rk3399_gru_sound.c +++ b/sound/soc/rockchip/rk3399_gru_sound.c @@ -219,19 +219,32 @@ static int rockchip_sound_dmic_hw_params(struct snd_pcm_substream *substream, return 0; } +static int rockchip_sound_startup(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + + runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE; + return snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_RATE, + 8000, 96000); +} + static const struct snd_soc_ops rockchip_sound_max98357a_ops = { + .startup = rockchip_sound_startup, .hw_params = rockchip_sound_max98357a_hw_params, }; static const struct snd_soc_ops rockchip_sound_rt5514_ops = { + .startup = rockchip_sound_startup, .hw_params = rockchip_sound_rt5514_hw_params, }; static const struct snd_soc_ops rockchip_sound_da7219_ops = { + .startup = rockchip_sound_startup, .hw_params = rockchip_sound_da7219_hw_params, }; static const struct snd_soc_ops rockchip_sound_dmic_ops = { + .startup = rockchip_sound_startup, .hw_params = rockchip_sound_dmic_hw_params, }; -- cgit v1.2.3 From 44b37eb79e16a56cb30ba55b2da452396b941e7a Mon Sep 17 00:00:00 2001 From: "leilk.liu" Date: Wed, 1 Jul 2020 17:00:20 +0800 Subject: spi: mediatek: use correct SPI_CFG2_REG MACRO this patch use correct SPI_CFG2_REG offset. Signed-off-by: leilk.liu Link: https://lore.kernel.org/r/20200701090020.7935-1-leilk.liu@mediatek.com Signed-off-by: Mark Brown --- drivers/spi/spi-mt65xx.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 6783e12c40c2..a556795caeef 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -36,7 +36,6 @@ #define SPI_CFG0_SCK_LOW_OFFSET 8 #define SPI_CFG0_CS_HOLD_OFFSET 16 #define SPI_CFG0_CS_SETUP_OFFSET 24 -#define SPI_ADJUST_CFG0_SCK_LOW_OFFSET 16 #define SPI_ADJUST_CFG0_CS_HOLD_OFFSET 0 #define SPI_ADJUST_CFG0_CS_SETUP_OFFSET 16 @@ -48,6 +47,8 @@ #define SPI_CFG1_CS_IDLE_MASK 0xff #define SPI_CFG1_PACKET_LOOP_MASK 0xff00 #define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000 +#define SPI_CFG2_SCK_HIGH_OFFSET 0 +#define SPI_CFG2_SCK_LOW_OFFSET 16 #define SPI_CMD_ACT BIT(0) #define SPI_CMD_RESUME BIT(1) @@ -283,7 +284,7 @@ static void mtk_spi_set_cs(struct spi_device *spi, bool enable) static void mtk_spi_prepare_transfer(struct spi_master *master, struct spi_transfer *xfer) { - u32 spi_clk_hz, div, sck_time, cs_time, reg_val = 0; + u32 spi_clk_hz, div, sck_time, cs_time, reg_val; struct mtk_spi *mdata = spi_master_get_devdata(master); spi_clk_hz = clk_get_rate(mdata->spi_clk); @@ -296,18 +297,18 @@ static void mtk_spi_prepare_transfer(struct spi_master *master, cs_time = sck_time * 2; if (mdata->dev_comp->enhance_timing) { + reg_val = (((sck_time - 1) & 0xffff) + << SPI_CFG2_SCK_HIGH_OFFSET); reg_val |= (((sck_time - 1) & 0xffff) - << SPI_CFG0_SCK_HIGH_OFFSET); - reg_val |= (((sck_time - 1) & 0xffff) - << SPI_ADJUST_CFG0_SCK_LOW_OFFSET); + << SPI_CFG2_SCK_LOW_OFFSET); writel(reg_val, mdata->base + SPI_CFG2_REG); - reg_val |= (((cs_time - 1) & 0xffff) + reg_val = (((cs_time - 1) & 0xffff) << SPI_ADJUST_CFG0_CS_HOLD_OFFSET); reg_val |= (((cs_time - 1) & 0xffff) << SPI_ADJUST_CFG0_CS_SETUP_OFFSET); writel(reg_val, mdata->base + SPI_CFG0_REG); } else { - reg_val |= (((sck_time - 1) & 0xff) + reg_val = (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_HIGH_OFFSET); reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET); reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET); -- cgit v1.2.3 From 853eab68afc80f59f36bbdeb715e5c88c501e680 Mon Sep 17 00:00:00 2001 From: Wade Mealing Date: Wed, 17 Jun 2020 13:49:47 +0200 Subject: Revert "zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()" Turns out that the permissions for 0400 really are what we want here, otherwise any user can read from this file. [fixed formatting, added changelog, and made attribute static - gregkh] Reported-by: Wade Mealing Cc: stable Fixes: f40609d1591f ("zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1847832 Reviewed-by: Steffen Maier Acked-by: Minchan Kim Link: https://lore.kernel.org/r/20200617114946.GA2131650@kroah.com Signed-off-by: Greg Kroah-Hartman --- drivers/block/zram/zram_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index 6e2ad90b17a3..270dd810be54 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -2021,7 +2021,8 @@ static ssize_t hot_add_show(struct class *class, return ret; return scnprintf(buf, PAGE_SIZE, "%d\n", ret); } -static CLASS_ATTR_RO(hot_add); +static struct class_attribute class_attr_hot_add = + __ATTR(hot_add, 0400, hot_add_show, NULL); static ssize_t hot_remove_store(struct class *class, struct class_attribute *attr, -- cgit v1.2.3 From 6740de9433556d5e3f94c4901dce120d27677be1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 1 Jul 2020 10:08:51 -0600 Subject: coresight: cti: Fix error handling in probe There were a couple problems with error handling in the probe function: 1) If the "drvdata" allocation failed then it lead to a NULL dereference. 2) On several error paths we decremented "nr_cti_cpu" before it was incremented which lead to a reference counting bug. There were also some parts of the error handling which were not bugs but were messy. The error handling was confusing to read. It printed some unnecessary error messages. The simplest way to fix these problems was to create a cti_pm_setup() function that did all the power management setup in one go. That way when we call cti_pm_release() we don't have to deal with the complications of a partially configured power management config. I reversed the "if (drvdata->ctidev.cpu >= 0)" condition in cti_pm_release() so that it mirros the new cti_pm_setup() function. Fixes: 6a0953ce7de9 ("coresight: cti: Add CPU idle pm notifer to CTI devices") Signed-off-by: Dan Carpenter Reviewed-by: Mike Leach Reviewed-by: Mathieu Poirier Link: https://lore.kernel.org/r/20200701160852.2782823-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-cti.c | 96 ++++++++++++++++------------- 1 file changed, 54 insertions(+), 42 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-cti.c b/drivers/hwtracing/coresight/coresight-cti.c index 40387d58c8e7..3ccc703dc940 100644 --- a/drivers/hwtracing/coresight/coresight-cti.c +++ b/drivers/hwtracing/coresight/coresight-cti.c @@ -747,17 +747,50 @@ static int cti_dying_cpu(unsigned int cpu) return 0; } +static int cti_pm_setup(struct cti_drvdata *drvdata) +{ + int ret; + + if (drvdata->ctidev.cpu == -1) + return 0; + + if (nr_cti_cpu) + goto done; + + cpus_read_lock(); + ret = cpuhp_setup_state_nocalls_cpuslocked( + CPUHP_AP_ARM_CORESIGHT_CTI_STARTING, + "arm/coresight_cti:starting", + cti_starting_cpu, cti_dying_cpu); + if (ret) { + cpus_read_unlock(); + return ret; + } + + ret = cpu_pm_register_notifier(&cti_cpu_pm_nb); + cpus_read_unlock(); + if (ret) { + cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CORESIGHT_CTI_STARTING); + return ret; + } + +done: + nr_cti_cpu++; + cti_cpu_drvdata[drvdata->ctidev.cpu] = drvdata; + + return 0; +} + /* release PM registrations */ static void cti_pm_release(struct cti_drvdata *drvdata) { - if (drvdata->ctidev.cpu >= 0) { - if (--nr_cti_cpu == 0) { - cpu_pm_unregister_notifier(&cti_cpu_pm_nb); + if (drvdata->ctidev.cpu == -1) + return; - cpuhp_remove_state_nocalls( - CPUHP_AP_ARM_CORESIGHT_CTI_STARTING); - } - cti_cpu_drvdata[drvdata->ctidev.cpu] = NULL; + cti_cpu_drvdata[drvdata->ctidev.cpu] = NULL; + if (--nr_cti_cpu == 0) { + cpu_pm_unregister_notifier(&cti_cpu_pm_nb); + cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CORESIGHT_CTI_STARTING); } } @@ -823,19 +856,14 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id) /* driver data*/ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); - if (!drvdata) { - ret = -ENOMEM; - dev_info(dev, "%s, mem err\n", __func__); - goto err_out; - } + if (!drvdata) + return -ENOMEM; /* Validity for the resource is already checked by the AMBA core */ base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) { - ret = PTR_ERR(base); - dev_err(dev, "%s, remap err\n", __func__); - goto err_out; - } + if (IS_ERR(base)) + return PTR_ERR(base); + drvdata->base = base; dev_set_drvdata(dev, drvdata); @@ -854,8 +882,7 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id) pdata = coresight_cti_get_platform_data(dev); if (IS_ERR(pdata)) { dev_err(dev, "coresight_cti_get_platform_data err\n"); - ret = PTR_ERR(pdata); - goto err_out; + return PTR_ERR(pdata); } /* default to powered - could change on PM notifications */ @@ -867,35 +894,20 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id) drvdata->ctidev.cpu); else cti_desc.name = coresight_alloc_device_name(&cti_sys_devs, dev); - if (!cti_desc.name) { - ret = -ENOMEM; - goto err_out; - } + if (!cti_desc.name) + return -ENOMEM; /* setup CPU power management handling for CPU bound CTI devices. */ - if (drvdata->ctidev.cpu >= 0) { - cti_cpu_drvdata[drvdata->ctidev.cpu] = drvdata; - if (!nr_cti_cpu++) { - cpus_read_lock(); - ret = cpuhp_setup_state_nocalls_cpuslocked( - CPUHP_AP_ARM_CORESIGHT_CTI_STARTING, - "arm/coresight_cti:starting", - cti_starting_cpu, cti_dying_cpu); - - if (!ret) - ret = cpu_pm_register_notifier(&cti_cpu_pm_nb); - cpus_read_unlock(); - if (ret) - goto err_out; - } - } + ret = cti_pm_setup(drvdata); + if (ret) + return ret; /* create dynamic attributes for connections */ ret = cti_create_cons_sysfs(dev, drvdata); if (ret) { dev_err(dev, "%s: create dynamic sysfs entries failed\n", cti_desc.name); - goto err_out; + goto pm_release; } /* set up coresight component description */ @@ -908,7 +920,7 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id) drvdata->csdev = coresight_register(&cti_desc); if (IS_ERR(drvdata->csdev)) { ret = PTR_ERR(drvdata->csdev); - goto err_out; + goto pm_release; } /* add to list of CTI devices */ @@ -927,7 +939,7 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id) dev_info(&drvdata->csdev->dev, "CTI initialized\n"); return 0; -err_out: +pm_release: cti_pm_release(drvdata); return ret; } -- cgit v1.2.3 From 9b6a3f3633a5cc928b78627764793b60cb62e0f6 Mon Sep 17 00:00:00 2001 From: Mike Leach Date: Wed, 1 Jul 2020 10:08:52 -0600 Subject: coresight: etmv4: Fix CPU power management setup in probe() function The current probe() function calls a pair of cpuhp_xxx API functions to setup CPU hotplug handling. The hotplug lock is held for the duration of the two calls and other CPU related code using cpus_read_lock() / cpus_read_unlock() calls. The problem is that on error states, goto: statements bypass the cpus_read_unlock() call. This code has increased in complexity as the driver has developed. This patch introduces a pair of helper functions etm4_pm_setup_cpuslocked() and etm4_pm_clear() which correct the issues above and group the PM code a little better. The two functions etm4_cpu_pm_register() and etm4_cpu_pm_unregister() are dropped as these call cpu_pm_register_notifier() / ..unregister_notifier() dependent on CONFIG_CPU_PM - but this define is used to nop these functions out in the pm headers - so the wrapper functions are superfluous. Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states") Fixes: e9f5d63f84fe ("hwtracing/coresight-etm4x: Use cpuhp_setup_state_nocalls_cpuslocked()") Fixes: 58eb457be028 ("hwtracing/coresight-etm4x: Convert to hotplug state machine") Signed-off-by: Mike Leach Cc: stable Reviewed-by: Mathieu Poirier Link: https://lore.kernel.org/r/20200701160852.2782823-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-etm4x.c | 82 +++++++++++++++++---------- 1 file changed, 53 insertions(+), 29 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c index 747afc875f91..0c35cd5e0d1d 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.c +++ b/drivers/hwtracing/coresight/coresight-etm4x.c @@ -1388,18 +1388,57 @@ static struct notifier_block etm4_cpu_pm_nb = { .notifier_call = etm4_cpu_pm_notify, }; -static int etm4_cpu_pm_register(void) +/* Setup PM. Called with cpus locked. Deals with error conditions and counts */ +static int etm4_pm_setup_cpuslocked(void) { - if (IS_ENABLED(CONFIG_CPU_PM)) - return cpu_pm_register_notifier(&etm4_cpu_pm_nb); + int ret; - return 0; + if (etm4_count++) + return 0; + + ret = cpu_pm_register_notifier(&etm4_cpu_pm_nb); + if (ret) + goto reduce_count; + + ret = cpuhp_setup_state_nocalls_cpuslocked(CPUHP_AP_ARM_CORESIGHT_STARTING, + "arm/coresight4:starting", + etm4_starting_cpu, etm4_dying_cpu); + + if (ret) + goto unregister_notifier; + + ret = cpuhp_setup_state_nocalls_cpuslocked(CPUHP_AP_ONLINE_DYN, + "arm/coresight4:online", + etm4_online_cpu, NULL); + + /* HP dyn state ID returned in ret on success */ + if (ret > 0) { + hp_online = ret; + return 0; + } + + /* failed dyn state - remove others */ + cpuhp_remove_state_nocalls_cpuslocked(CPUHP_AP_ARM_CORESIGHT_STARTING); + +unregister_notifier: + cpu_pm_unregister_notifier(&etm4_cpu_pm_nb); + +reduce_count: + --etm4_count; + return ret; } -static void etm4_cpu_pm_unregister(void) +static void etm4_pm_clear(void) { - if (IS_ENABLED(CONFIG_CPU_PM)) - cpu_pm_unregister_notifier(&etm4_cpu_pm_nb); + if (--etm4_count != 0) + return; + + cpu_pm_unregister_notifier(&etm4_cpu_pm_nb); + cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CORESIGHT_STARTING); + if (hp_online) { + cpuhp_remove_state_nocalls(hp_online); + hp_online = 0; + } } static int etm4_probe(struct amba_device *adev, const struct amba_id *id) @@ -1453,24 +1492,15 @@ static int etm4_probe(struct amba_device *adev, const struct amba_id *id) etm4_init_arch_data, drvdata, 1)) dev_err(dev, "ETM arch init failed\n"); - if (!etm4_count++) { - cpuhp_setup_state_nocalls_cpuslocked(CPUHP_AP_ARM_CORESIGHT_STARTING, - "arm/coresight4:starting", - etm4_starting_cpu, etm4_dying_cpu); - ret = cpuhp_setup_state_nocalls_cpuslocked(CPUHP_AP_ONLINE_DYN, - "arm/coresight4:online", - etm4_online_cpu, NULL); - if (ret < 0) - goto err_arch_supported; - hp_online = ret; + ret = etm4_pm_setup_cpuslocked(); + cpus_read_unlock(); - ret = etm4_cpu_pm_register(); - if (ret) - goto err_arch_supported; + /* etm4_pm_setup_cpuslocked() does its own cleanup - exit on error */ + if (ret) { + etmdrvdata[drvdata->cpu] = NULL; + return ret; } - cpus_read_unlock(); - if (etm4_arch_supported(drvdata->arch) == false) { ret = -EINVAL; goto err_arch_supported; @@ -1517,13 +1547,7 @@ static int etm4_probe(struct amba_device *adev, const struct amba_id *id) err_arch_supported: etmdrvdata[drvdata->cpu] = NULL; - if (--etm4_count == 0) { - etm4_cpu_pm_unregister(); - - cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CORESIGHT_STARTING); - if (hp_online) - cpuhp_remove_state_nocalls(hp_online); - } + etm4_pm_clear(); return ret; } -- cgit v1.2.3 From 5aaec71d605426d5963e17a88d0d9db97ccd3345 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 30 Jun 2020 19:30:20 -0300 Subject: ASoC: dt-bindings: simple-card: Fix 'make dt_binding_check' warnings The following build warnings are seen with 'make dt_binding_check': Documentation/devicetree/bindings/sound/simple-card.example.dts:209.46-211.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:213.37-215.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:250.42-261.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:263.42-288.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:270.32-272.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:273.23-275.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:276.23-278.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@2: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:279.23-281.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@3: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:290.42-303.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@2: node has a unit name, but no reg or ranges property Fix them all. Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20200630223020.25546-1-festevam@gmail.com Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/simple-card.yaml | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml index cb2bb5fac0e1..f939f20985ae 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.yaml +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml @@ -380,6 +380,8 @@ examples: - | sound { compatible = "simple-audio-card"; + #address-cells = <1>; + #size-cells = <0>; simple-audio-card,name = "rsnd-ak4643"; simple-audio-card,format = "left_j"; @@ -393,10 +395,12 @@ examples: "ak4642 Playback", "DAI1 Playback"; dpcmcpu: simple-audio-card,cpu@0 { + reg = <0>; sound-dai = <&rcar_sound 0>; }; simple-audio-card,cpu@1 { + reg = <1>; sound-dai = <&rcar_sound 1>; }; @@ -420,6 +424,8 @@ examples: - | sound { compatible = "simple-audio-card"; + #address-cells = <1>; + #size-cells = <0>; simple-audio-card,routing = "pcm3168a Playback", "DAI1 Playback", @@ -428,6 +434,7 @@ examples: "pcm3168a Playback", "DAI4 Playback"; simple-audio-card,dai-link@0 { + reg = <0>; format = "left_j"; bitclock-master = <&sndcpu0>; frame-master = <&sndcpu0>; @@ -441,22 +448,23 @@ examples: }; simple-audio-card,dai-link@1 { + reg = <1>; format = "i2s"; bitclock-master = <&sndcpu1>; frame-master = <&sndcpu1>; convert-channels = <8>; /* TDM Split */ - sndcpu1: cpu@0 { + sndcpu1: cpu0 { sound-dai = <&rcar_sound 1>; }; - cpu@1 { + cpu1 { sound-dai = <&rcar_sound 2>; }; - cpu@2 { + cpu2 { sound-dai = <&rcar_sound 3>; }; - cpu@3 { + cpu3 { sound-dai = <&rcar_sound 4>; }; codec { @@ -468,6 +476,7 @@ examples: }; simple-audio-card,dai-link@2 { + reg = <2>; format = "i2s"; bitclock-master = <&sndcpu2>; frame-master = <&sndcpu2>; -- cgit v1.2.3 From da32b28c95a79e399e18c03f8178f41aec9c66e4 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Thu, 25 Jun 2020 12:17:42 -0700 Subject: dmaengine: idxd: cleanup workqueue config after disabling After disabling a device, we should clean up the internal state for the wqs and zero out the configuration registers. Without doing so can cause issues when the user reprogram the wqs. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Reported-by: Yixin Zhang Signed-off-by: Dave Jiang Tested-by: Yixin Zhang Link: https://lore.kernel.org/r/159311264246.1198.11955791213681679428.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul --- drivers/dma/idxd/device.c | 25 +++++++++++++++++++++++++ drivers/dma/idxd/idxd.h | 1 + drivers/dma/idxd/sysfs.c | 5 +++++ 3 files changed, 31 insertions(+) diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c index 8d79a8787104..8d2718c585dc 100644 --- a/drivers/dma/idxd/device.c +++ b/drivers/dma/idxd/device.c @@ -320,6 +320,31 @@ void idxd_wq_unmap_portal(struct idxd_wq *wq) devm_iounmap(dev, wq->dportal); } +void idxd_wq_disable_cleanup(struct idxd_wq *wq) +{ + struct idxd_device *idxd = wq->idxd; + struct device *dev = &idxd->pdev->dev; + int i, wq_offset; + + lockdep_assert_held(&idxd->dev_lock); + memset(&wq->wqcfg, 0, sizeof(wq->wqcfg)); + wq->type = IDXD_WQT_NONE; + wq->size = 0; + wq->group = NULL; + wq->threshold = 0; + wq->priority = 0; + clear_bit(WQ_FLAG_DEDICATED, &wq->flags); + memset(wq->name, 0, WQ_NAME_SIZE); + + for (i = 0; i < 8; i++) { + wq_offset = idxd->wqcfg_offset + wq->id * 32 + i * sizeof(u32); + iowrite32(0, idxd->reg_base + wq_offset); + dev_dbg(dev, "WQ[%d][%d][%#x]: %#x\n", + wq->id, i, wq_offset, + ioread32(idxd->reg_base + wq_offset)); + } +} + /* Device control bits */ static inline bool idxd_is_enabled(struct idxd_device *idxd) { diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h index b8f8a363b4a7..908c8d0ef3ab 100644 --- a/drivers/dma/idxd/idxd.h +++ b/drivers/dma/idxd/idxd.h @@ -290,6 +290,7 @@ int idxd_wq_enable(struct idxd_wq *wq); int idxd_wq_disable(struct idxd_wq *wq); int idxd_wq_map_portal(struct idxd_wq *wq); void idxd_wq_unmap_portal(struct idxd_wq *wq); +void idxd_wq_disable_cleanup(struct idxd_wq *wq); /* submission */ int idxd_submit_desc(struct idxd_wq *wq, struct idxd_desc *desc); diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c index 052dae5d6ddd..2e2c5082f322 100644 --- a/drivers/dma/idxd/sysfs.c +++ b/drivers/dma/idxd/sysfs.c @@ -315,6 +315,11 @@ static int idxd_config_bus_remove(struct device *dev) idxd_unregister_dma_device(idxd); spin_lock_irqsave(&idxd->dev_lock, flags); rc = idxd_device_disable(idxd); + for (i = 0; i < idxd->max_wqs; i++) { + struct idxd_wq *wq = &idxd->wqs[i]; + + idxd_wq_disable_cleanup(wq); + } spin_unlock_irqrestore(&idxd->dev_lock, flags); module_put(THIS_MODULE); if (rc < 0) -- cgit v1.2.3 From e3122822a74033ba8d6d9af855078f9ab741e33f Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Thu, 25 Jun 2020 12:16:54 -0700 Subject: dmaengine: idxd: fix misc interrupt handler thread unmasking Fix unmasking of misc interrupt handler when completing normal. It exits early and skips the unmasking with the current implementation. Fix to unmask interrupt when exiting normally. Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/159311256528.855.11527922406329728512.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul --- drivers/dma/idxd/irq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/dma/idxd/irq.c b/drivers/dma/idxd/irq.c index 6510791b9921..8a35f58da689 100644 --- a/drivers/dma/idxd/irq.c +++ b/drivers/dma/idxd/irq.c @@ -141,7 +141,7 @@ irqreturn_t idxd_misc_thread(int vec, void *data) iowrite32(cause, idxd->reg_base + IDXD_INTCAUSE_OFFSET); if (!err) - return IRQ_HANDLED; + goto out; gensts.bits = ioread32(idxd->reg_base + IDXD_GENSTATS_OFFSET); if (gensts.state == IDXD_DEVICE_STATE_HALT) { @@ -162,6 +162,7 @@ irqreturn_t idxd_misc_thread(int vec, void *data) spin_unlock_bh(&idxd->dev_lock); } + out: idxd_unmask_msix_vector(idxd, irq_entry->id); return IRQ_HANDLED; } -- cgit v1.2.3 From 73f9941306d5ce030f3ffc7db425c7b2a798cf8e Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Thu, 4 Jun 2020 13:37:10 -0700 Subject: xtensa: fix __sync_fetch_and_{and,or}_4 declarations MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Building xtensa kernel with gcc-10 produces the following warnings: arch/xtensa/kernel/xtensa_ksyms.c:90:15: warning: conflicting types for built-in function ‘__sync_fetch_and_and_4’; expected ‘unsigned int(volatile void *, unsigned int)’ [-Wbuiltin-declaration-mismatch] arch/xtensa/kernel/xtensa_ksyms.c:96:15: warning: conflicting types for built-in function ‘__sync_fetch_and_or_4’; expected ‘unsigned int(volatile void *, unsigned int)’ [-Wbuiltin-declaration-mismatch] Fix declarations of these functions to avoid the warning. Signed-off-by: Max Filippov --- arch/xtensa/kernel/xtensa_ksyms.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c index 4092555828b1..24cf6972eace 100644 --- a/arch/xtensa/kernel/xtensa_ksyms.c +++ b/arch/xtensa/kernel/xtensa_ksyms.c @@ -87,13 +87,13 @@ void __xtensa_libgcc_window_spill(void) } EXPORT_SYMBOL(__xtensa_libgcc_window_spill); -unsigned long __sync_fetch_and_and_4(unsigned long *p, unsigned long v) +unsigned int __sync_fetch_and_and_4(volatile void *p, unsigned int v) { BUG(); } EXPORT_SYMBOL(__sync_fetch_and_and_4); -unsigned long __sync_fetch_and_or_4(unsigned long *p, unsigned long v) +unsigned int __sync_fetch_and_or_4(volatile void *p, unsigned int v) { BUG(); } -- cgit v1.2.3 From 0d5ab144429e8bd80889b856a44d56ab4a5cd59b Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Thu, 2 Jul 2020 08:32:25 -0700 Subject: xtensa: update *pos in cpuinfo_op.next Increment *pos in the cpuinfo_op.next to fix the following warning triggered by cat /proc/cpuinfo: seq_file: buggy .next function c_next did not update position index Signed-off-by: Max Filippov --- arch/xtensa/kernel/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index d9204dc2656e..be2c78f71695 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -724,7 +724,8 @@ c_start(struct seq_file *f, loff_t *pos) static void * c_next(struct seq_file *f, void *v, loff_t *pos) { - return NULL; + ++*pos; + return c_start(f, pos); } static void -- cgit v1.2.3 From 9f9113925018d500a95df539014d9ff11ac2c02d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 2 Jul 2020 10:44:20 -0700 Subject: bus: ti-sysc: Fix wakeirq sleeping function called from invalid context With CONFIG_DEBUG_ATOMIC_SLEEP enabled we can see the following with wakeirqs and serial console idled: BUG: sleeping function called from invalid context at drivers/bus/ti-sysc.c:242 ... (sysc_wait_softreset) from [] (sysc_enable_module+0x48/0x274) (sysc_enable_module) from [] (sysc_runtime_resume+0x19c/0x1d8) (sysc_runtime_resume) from [] (sysc_child_runtime_resume+0x58/0x84) (sysc_child_runtime_resume) from [] (__rpm_callback+0x30/0x12c) (__rpm_callback) from [] (rpm_callback+0x20/0x80) (rpm_callback) from [] (rpm_resume+0x638/0x7fc) (rpm_resume) from [] (__pm_runtime_resume+0x60/0x9c) (__pm_runtime_resume) from [] (handle_threaded_wake_irq+0x24/0x60) (handle_threaded_wake_irq) from [] (irq_thread_fn+0x1c/0x78) (irq_thread_fn) from [] (irq_thread+0x140/0x26c) We have __pm_runtime_resume() call the sysc_runtime_resume() with spinlock held and interrupts disabled. Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index bb54fb514e40..2ce8612f13a9 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -236,15 +236,14 @@ static int sysc_wait_softreset(struct sysc *ddata) syss_done = ddata->cfg.syss_mask; if (syss_offset >= 0) { - error = readx_poll_timeout(sysc_read_sysstatus, ddata, rstval, - (rstval & ddata->cfg.syss_mask) == - syss_done, - 100, MAX_MODULE_SOFTRESET_WAIT); + error = readx_poll_timeout_atomic(sysc_read_sysstatus, ddata, + rstval, (rstval & ddata->cfg.syss_mask) == + syss_done, 100, MAX_MODULE_SOFTRESET_WAIT); } else if (ddata->cfg.quirks & SYSC_QUIRK_RESET_STATUS) { - error = readx_poll_timeout(sysc_read_sysconfig, ddata, rstval, - !(rstval & sysc_mask), - 100, MAX_MODULE_SOFTRESET_WAIT); + error = readx_poll_timeout_atomic(sysc_read_sysconfig, ddata, + rstval, !(rstval & sysc_mask), + 100, MAX_MODULE_SOFTRESET_WAIT); } return error; -- cgit v1.2.3 From afe6f1eeb08f85e57f0a02b71efb5a0839606aac Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 2 Jul 2020 10:41:02 -0700 Subject: bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk With CONFIG_DEBUG_ATOMIC_SLEEP enabled we can see the following with RTC probe: BUG: sleeping function called from invalid context at drivers/bus/ti-sysc.c:1736 ... (sysc_quirk_rtc) from [] (sysc_write_sysconfig+0x1c/0x60) (sysc_write_sysconfig) from [] (sysc_enable_module+0x11c/0x274) (sysc_enable_module) from [] (sysc_probe+0xe9c/0x1380) (sysc_probe) from [] (platform_drv_probe+0x48/0x98) Fixes: e8639e1c986a ("bus: ti-sysc: Handle module unlock quirk needed for some RTC") Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 2ce8612f13a9..f5a533ce97f9 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1727,8 +1727,8 @@ static void sysc_quirk_rtc(struct sysc *ddata, bool lock) local_irq_save(flags); /* RTC_STATUS BUSY bit may stay active for 1/32768 seconds (~30 usec) */ - error = readl_poll_timeout(ddata->module_va + 0x44, val, - !(val & BIT(0)), 100, 50); + error = readl_poll_timeout_atomic(ddata->module_va + 0x44, val, + !(val & BIT(0)), 100, 50); if (error) dev_warn(ddata->dev, "rtc busy timeout\n"); /* Now we have ~15 microseconds to read/write various registers */ -- cgit v1.2.3 From a55de412228cc5a2b4bf8d2a09849898102633e2 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 2 Jul 2020 13:57:14 -0700 Subject: bus: ti-sysc: Do not disable on suspend for no-idle If we have "ti,no-idle" specified for a module we must not disable the the module on suspend to keep things backwards compatible. Fixes: 386cb76681ca ("bus: ti-sysc: Handle missed no-idle property in addition to no-idle-on-init") Reported-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index f5a533ce97f9..4f513fa3362f 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1278,7 +1278,8 @@ static int __maybe_unused sysc_noirq_suspend(struct device *dev) ddata = dev_get_drvdata(dev); - if (ddata->cfg.quirks & SYSC_QUIRK_LEGACY_IDLE) + if (ddata->cfg.quirks & + (SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE)) return 0; return pm_runtime_force_suspend(dev); @@ -1290,7 +1291,8 @@ static int __maybe_unused sysc_noirq_resume(struct device *dev) ddata = dev_get_drvdata(dev); - if (ddata->cfg.quirks & SYSC_QUIRK_LEGACY_IDLE) + if (ddata->cfg.quirks & + (SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE)) return 0; return pm_runtime_force_resume(dev); -- cgit v1.2.3 From 1a9826204109acd3f8e926394b16bd4cdc4c5dbb Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Wed, 1 Jul 2020 11:07:44 +0800 Subject: scsi: iscsi: Change iSCSI workqueue max_active back to 1 Commit 3ce419662dd4 ("scsi: iscsi: Register sysfs for iscsi workqueue") enabled 'cpumask' support for iSCSI workqueues. However, it is unnecessary to set max_active = 2 since 'cpumask' can still be modified when max_active is 1. This patch sets max_active to 1 so as to keep the same behaviour as before. Link: https://lore.kernel.org/r/20200701030745.16897-1-bob.liu@oracle.com Reviewed-by: Mike Christie Signed-off-by: Bob Liu Signed-off-by: Martin K. Petersen --- drivers/scsi/libiscsi.c | 2 +- drivers/scsi/scsi_transport_iscsi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index e5a64d4f255c..49c8a1818baf 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -2629,7 +2629,7 @@ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, "iscsi_q_%d", shost->host_no); ihost->workq = alloc_workqueue("%s", WQ_SYSFS | __WQ_LEGACY | WQ_MEM_RECLAIM | WQ_UNBOUND, - 2, ihost->workq_name); + 1, ihost->workq_name); if (!ihost->workq) goto free_host; } diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index f4cc08eb47ba..7ae5024e7824 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -4760,7 +4760,7 @@ static __init int iscsi_transport_init(void) iscsi_eh_timer_workq = alloc_workqueue("%s", WQ_SYSFS | __WQ_LEGACY | WQ_MEM_RECLAIM | WQ_UNBOUND, - 2, "iscsi_eh"); + 1, "iscsi_eh"); if (!iscsi_eh_timer_workq) { err = -ENOMEM; goto release_nls; -- cgit v1.2.3 From cb551b8dc079d2ef189145782627c99cb68c0255 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Wed, 1 Jul 2020 17:52:54 +0900 Subject: scsi: mpt3sas: Fix unlock imbalance In BRM_status_show(), if the condition "!ioc->is_warpdrive" tested on entry to the function is true, a "goto out" is called. This results in unlocking ioc->pci_access_mutex without this mutex lock being taken. This generates the following splat: [ 1148.539883] mpt3sas_cm2: BRM_status_show: BRM attribute is only for warpdrive [ 1148.547184] [ 1148.548708] ===================================== [ 1148.553501] WARNING: bad unlock balance detected! [ 1148.558277] 5.8.0-rc3+ #827 Not tainted [ 1148.562183] ------------------------------------- [ 1148.566959] cat/5008 is trying to release lock (&ioc->pci_access_mutex) at: [ 1148.574035] [] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.580574] but there are no more locks to release! [ 1148.585524] [ 1148.585524] other info that might help us debug this: [ 1148.599624] 3 locks held by cat/5008: [ 1148.607085] #0: ffff92aea3e392c0 (&p->lock){+.+.}-{3:3}, at: seq_read+0x34/0x480 [ 1148.618509] #1: ffff922ef14c4888 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x2a/0xb0 [ 1148.630729] #2: ffff92aedb5d7310 (kn->active#224){.+.+}-{0:0}, at: kernfs_seq_start+0x32/0xb0 [ 1148.643347] [ 1148.643347] stack backtrace: [ 1148.655259] CPU: 73 PID: 5008 Comm: cat Not tainted 5.8.0-rc3+ #827 [ 1148.665309] Hardware name: HGST H4060-S/S2600STB, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 1148.678394] Call Trace: [ 1148.684750] dump_stack+0x78/0xa0 [ 1148.691802] lock_release.cold+0x45/0x4a [ 1148.699451] __mutex_unlock_slowpath+0x35/0x270 [ 1148.707675] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.716092] dev_attr_show+0x19/0x40 [ 1148.723664] sysfs_kf_seq_show+0x87/0x100 [ 1148.731193] seq_read+0xbc/0x480 [ 1148.737882] vfs_read+0xa0/0x160 [ 1148.744514] ksys_read+0x58/0xd0 [ 1148.751129] do_syscall_64+0x4c/0xa0 [ 1148.757941] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1148.766240] RIP: 0033:0x7f1230566542 [ 1148.772957] Code: Bad RIP value. [ 1148.779206] RSP: 002b:00007ffeac1bcac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 1148.790063] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f1230566542 [ 1148.800284] RDX: 0000000000020000 RSI: 00007f1223460000 RDI: 0000000000000003 [ 1148.810474] RBP: 00007f1223460000 R08: 00007f122345f010 R09: 0000000000000000 [ 1148.820641] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000 [ 1148.830728] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 Fix this by returning immediately instead of jumping to the out label. Link: https://lore.kernel.org/r/20200701085254.51740-1-damien.lemoal@wdc.com Reviewed-by: Johannes Thumshirn Acked-by: Sreekanth Reddy Signed-off-by: Damien Le Moal Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_ctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index 62e552838565..e94e72de2fc6 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -3145,7 +3145,7 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr, if (!ioc->is_warpdrive) { ioc_err(ioc, "%s: BRM attribute is only for warpdrive\n", __func__); - goto out; + return 0; } /* pci_access_mutex lock acquired by sysfs show path */ mutex_lock(&ioc->pci_access_mutex); -- cgit v1.2.3 From f38278e9b810b06aff2981d505267be984423ba3 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 1 Jul 2020 16:41:40 +0100 Subject: serial: sh-sci: Initialize spinlock for uart console serial core expects the spinlock to be initialized by the controller driver for serial console, this patch makes sure the spinlock is initialized, fixing the below issue: [ 0.865928] BUG: spinlock bad magic on CPU#0, swapper/0/1 [ 0.865945] lock: sci_ports+0x0/0x4c80, .magic: 00000000, .owner: /-1, .owner_cpu: 0 [ 0.865955] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc1+ #112 [ 0.865961] Hardware name: HopeRun HiHope RZ/G2H with sub board (DT) [ 0.865968] Call trace: [ 0.865979] dump_backtrace+0x0/0x1d8 [ 0.865985] show_stack+0x14/0x20 [ 0.865996] dump_stack+0xe8/0x130 [ 0.866006] spin_dump+0x6c/0x88 [ 0.866012] do_raw_spin_lock+0xb0/0xf8 [ 0.866023] _raw_spin_lock_irqsave+0x80/0xa0 [ 0.866032] uart_add_one_port+0x3a4/0x4e0 [ 0.866039] sci_probe+0x504/0x7c8 [ 0.866048] platform_drv_probe+0x50/0xa0 [ 0.866059] really_probe+0xdc/0x330 [ 0.866066] driver_probe_device+0x58/0xb8 [ 0.866072] device_driver_attach+0x6c/0x90 [ 0.866078] __driver_attach+0x88/0xd0 [ 0.866085] bus_for_each_dev+0x74/0xc8 [ 0.866091] driver_attach+0x20/0x28 [ 0.866098] bus_add_driver+0x14c/0x1f8 [ 0.866104] driver_register+0x60/0x110 [ 0.866109] __platform_driver_register+0x40/0x48 [ 0.866119] sci_init+0x2c/0x34 [ 0.866127] do_one_initcall+0x88/0x428 [ 0.866137] kernel_init_freeable+0x2c0/0x328 [ 0.866143] kernel_init+0x10/0x108 [ 0.866150] ret_from_fork+0x10/0x18 Signed-off-by: Lad Prabhakar Reviewed-by: Biju Das Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Cc: stable Link: https://lore.kernel.org/r/1593618100-2151-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index e1179e74a2b8..204bb68ce3ca 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -3301,6 +3301,9 @@ static int sci_probe_single(struct platform_device *dev, sciport->port.flags |= UPF_HARD_FLOW; } + if (sci_uart_driver.cons->index == sciport->port.line) + spin_lock_init(&sciport->port.lock); + ret = uart_add_one_port(&sci_uart_driver, &sciport->port); if (ret) { sci_cleanup_single(sciport); -- cgit v1.2.3 From 324ac45f25e634eca6346953ae531e8da3e0c73d Mon Sep 17 00:00:00 2001 From: Esben Haabendal Date: Wed, 1 Jul 2020 16:56:57 +0200 Subject: uio_pdrv_genirq: Remove warning when irq is not specified Since e3a3c3a20555 ("UIO: fix uio_pdrv_genirq with device tree but no interrupt"), the uio_pdrv_genirq has supported use without interrupt, so the change in 7723f4c5ecdb ("driver core: platform: Add an error message to") added false warnings for those cases. Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Esben Haabendal Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200701145659.3978-2-esben@geanix.com Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio_pdrv_genirq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c index ae319ef3a832..1d69dd49c6d2 100644 --- a/drivers/uio/uio_pdrv_genirq.c +++ b/drivers/uio/uio_pdrv_genirq.c @@ -159,7 +159,7 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev) priv->pdev = pdev; if (!uioinfo->irq) { - ret = platform_get_irq(pdev, 0); + ret = platform_get_irq_optional(pdev, 0); uioinfo->irq = ret; if (ret == -ENXIO && pdev->dev.of_node) uioinfo->irq = UIO_IRQ_NONE; -- cgit v1.2.3 From bf12fdf0ab728ca8e5933aac46dd972c0dd0421e Mon Sep 17 00:00:00 2001 From: Esben Haabendal Date: Wed, 1 Jul 2020 16:56:58 +0200 Subject: uio_pdrv_genirq: fix use without device tree and no interrupt While e3a3c3a20555 ("UIO: fix uio_pdrv_genirq with device tree but no interrupt") added support for using uio_pdrv_genirq for devices without interrupt for device tree platforms, the removal of uio_pdrv in 26dac3c49d56 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") broke the support for non device tree platforms. This change fixes this, so that uio_pdrv_genirq can be used without interrupt on all platforms. This still leaves the support that uio_pdrv had for custom interrupt handler lacking, as uio_pdrv_genirq does not handle it (yet). Fixes: 26dac3c49d56 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") Signed-off-by: Esben Haabendal Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200701145659.3978-3-esben@geanix.com Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio_pdrv_genirq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c index 1d69dd49c6d2..b60173bc93ce 100644 --- a/drivers/uio/uio_pdrv_genirq.c +++ b/drivers/uio/uio_pdrv_genirq.c @@ -161,7 +161,7 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev) if (!uioinfo->irq) { ret = platform_get_irq_optional(pdev, 0); uioinfo->irq = ret; - if (ret == -ENXIO && pdev->dev.of_node) + if (ret == -ENXIO) uioinfo->irq = UIO_IRQ_NONE; else if (ret == -EPROBE_DEFER) return ret; -- cgit v1.2.3 From c0dadd298faca771f749a01848fa86567c5afa35 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 2 Jul 2020 15:42:24 +0200 Subject: MAINTAINERS: Change Maintainer for some at91 drivers I hand over the maintenance of these drivers to my colleagues. Claudiu, Codrin and Tudor already have experience with these controllers and sub-systems. Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20200702134224.3750-1-nicolas.ferre@microchip.com Signed-off-by: Mark Brown --- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index e64e5db31497..8a9dce123f6f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11168,17 +11168,17 @@ F: drivers/iio/adc/at91-sama5d2_adc.c F: include/dt-bindings/iio/adc/at91-sama5d2_adc.h MICROCHIP SAMA5D2-COMPATIBLE SHUTDOWN CONTROLLER -M: Nicolas Ferre +M: Claudiu Beznea S: Supported F: drivers/power/reset/at91-sama5d2_shdwc.c MICROCHIP SPI DRIVER -M: Nicolas Ferre +M: Tudor Ambarus S: Supported F: drivers/spi/spi-atmel.* MICROCHIP SSC DRIVER -M: Nicolas Ferre +M: Codrin Ciubotariu L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Supported F: drivers/misc/atmel-ssc.c -- cgit v1.2.3 From e84861fec32dee8a2e62bbaa52cded6b05a2a456 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 3 Jul 2020 12:33:15 +0200 Subject: regmap: dev_get_regmap_match(): fix string comparison This function is used by dev_get_regmap() to retrieve a regmap for the specified device. If the device has more than one regmap, the name parameter can be used to specify one. The code here uses a pointer comparison to check for equal strings. This however will probably always fail, as the regmap->name is allocated via kstrdup_const() from the regmap's config->name. Fix this by using strcmp() instead. Signed-off-by: Marc Kleine-Budde Link: https://lore.kernel.org/r/20200703103315.267996-1-mkl@pengutronix.de Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 06a796821e8b..795a62a04022 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1364,7 +1364,7 @@ static int dev_get_regmap_match(struct device *dev, void *res, void *data) /* If the user didn't specify a name match any */ if (data) - return (*r)->name == data; + return !strcmp((*r)->name, data); else return 1; } -- cgit v1.2.3 From e9c6004eef0019375e4b0339f1f88d9d6ed99018 Mon Sep 17 00:00:00 2001 From: Nuno Sá Date: Wed, 1 Jul 2020 14:04:41 +0200 Subject: iio: adc: adi-axi-adc: Fix object reference counting MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When looking for a registered client to attach with, the wrong reference counters are being grabbed. The idea is to increment the module and device counters of the client device and not the counters of the axi device being probed. Fixes: ef04070692a2 (iio: adc: adi-axi-adc: add support for AXI ADC IP core) Signed-off-by: Nuno Sá Acked-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron --- drivers/iio/adc/adi-axi-adc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c index c24c8da99eb4..7af8f0510535 100644 --- a/drivers/iio/adc/adi-axi-adc.c +++ b/drivers/iio/adc/adi-axi-adc.c @@ -332,12 +332,12 @@ static struct adi_axi_adc_client *adi_axi_adc_attach_client(struct device *dev) if (cl->dev->of_node != cln) continue; - if (!try_module_get(dev->driver->owner)) { + if (!try_module_get(cl->dev->driver->owner)) { mutex_unlock(®istered_clients_lock); return ERR_PTR(-ENODEV); } - get_device(dev); + get_device(cl->dev); cl->info = info; mutex_unlock(®istered_clients_lock); return cl; -- cgit v1.2.3 From 838e00b13bfd4cac8b24df25bfc58e2eb99bcc70 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 7 Jun 2020 16:53:49 +0100 Subject: iio:magnetometer:ak8974: Fix alignment and data leak issues One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes: 7c94a8b2ee8cf ("iio: magn: add a driver for AK8974") Reported-by: Lars-Peter Clausen Reviewed-by: Linus Walleij Signed-off-by: Jonathan Cameron Cc: --- drivers/iio/magnetometer/ak8974.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/iio/magnetometer/ak8974.c b/drivers/iio/magnetometer/ak8974.c index 041c9007bfbe..91c39352fba2 100644 --- a/drivers/iio/magnetometer/ak8974.c +++ b/drivers/iio/magnetometer/ak8974.c @@ -192,6 +192,11 @@ struct ak8974 { bool drdy_irq; struct completion drdy_complete; bool drdy_active_low; + /* Ensure timestamp is naturally aligned */ + struct { + __le16 channels[3]; + s64 ts __aligned(8); + } scan; }; static const char ak8974_reg_avdd[] = "avdd"; @@ -657,7 +662,6 @@ static void ak8974_fill_buffer(struct iio_dev *indio_dev) { struct ak8974 *ak8974 = iio_priv(indio_dev); int ret; - __le16 hw_values[8]; /* Three axes + 64bit padding */ pm_runtime_get_sync(&ak8974->i2c->dev); mutex_lock(&ak8974->lock); @@ -667,13 +671,13 @@ static void ak8974_fill_buffer(struct iio_dev *indio_dev) dev_err(&ak8974->i2c->dev, "error triggering measure\n"); goto out_unlock; } - ret = ak8974_getresult(ak8974, hw_values); + ret = ak8974_getresult(ak8974, ak8974->scan.channels); if (ret) { dev_err(&ak8974->i2c->dev, "error getting measures\n"); goto out_unlock; } - iio_push_to_buffers_with_timestamp(indio_dev, hw_values, + iio_push_to_buffers_with_timestamp(indio_dev, &ak8974->scan, iio_get_time_ns(indio_dev)); out_unlock: -- cgit v1.2.3 From ea5e7a7bb6205d24371373cd80325db1bc15eded Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 7 Jun 2020 16:53:52 +0100 Subject: iio:humidity:hdc100x Fix alignment and data leak issues One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc so no data can leak apart from previous readings. Fixes: 16bf793f86b2 ("iio: humidity: hdc100x: add triggered buffer support for HDC100X") Reported-by: Lars-Peter Clausen Acked-by: Matt Ranostay Cc: Alison Schofield Signed-off-by: Jonathan Cameron Cc: --- drivers/iio/humidity/hdc100x.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c index 7ecd2ffa3132..665eb7e38293 100644 --- a/drivers/iio/humidity/hdc100x.c +++ b/drivers/iio/humidity/hdc100x.c @@ -38,6 +38,11 @@ struct hdc100x_data { /* integration time of the sensor */ int adc_int_us[2]; + /* Ensure natural alignment of timestamp */ + struct { + __be16 channels[2]; + s64 ts __aligned(8); + } scan; }; /* integration time in us */ @@ -322,7 +327,6 @@ static irqreturn_t hdc100x_trigger_handler(int irq, void *p) struct i2c_client *client = data->client; int delay = data->adc_int_us[0] + data->adc_int_us[1]; int ret; - s16 buf[8]; /* 2x s16 + padding + 8 byte timestamp */ /* dual read starts at temp register */ mutex_lock(&data->lock); @@ -333,13 +337,13 @@ static irqreturn_t hdc100x_trigger_handler(int irq, void *p) } usleep_range(delay, delay + 1000); - ret = i2c_master_recv(client, (u8 *)buf, 4); + ret = i2c_master_recv(client, (u8 *)data->scan.channels, 4); if (ret < 0) { dev_err(&client->dev, "cannot read sensor data\n"); goto err; } - iio_push_to_buffers_with_timestamp(indio_dev, buf, + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, iio_get_time_ns(indio_dev)); err: mutex_unlock(&data->lock); -- cgit v1.2.3 From 5c49056ad9f3c786f7716da2dd47e4488fc6bd25 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 7 Jun 2020 16:53:53 +0100 Subject: iio:humidity:hts221 Fix alignment and data leak issues One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc so no data can leak apart from previous readings. Explicit alignment of ts needed to ensure consistent padding on all architectures (particularly x86_32 with it's 4 byte alignment of s64) Fixes: e4a70e3e7d84 ("iio: humidity: add support to hts221 rh/temp combo device") Reported-by: Lars-Peter Clausen Acked-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron Cc: --- drivers/iio/humidity/hts221.h | 7 +++++-- drivers/iio/humidity/hts221_buffer.c | 9 +++++---- 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/iio/humidity/hts221.h b/drivers/iio/humidity/hts221.h index 7d6771f7cf47..b2eb5abeaccd 100644 --- a/drivers/iio/humidity/hts221.h +++ b/drivers/iio/humidity/hts221.h @@ -14,8 +14,6 @@ #include -#define HTS221_DATA_SIZE 2 - enum hts221_sensor_type { HTS221_SENSOR_H, HTS221_SENSOR_T, @@ -39,6 +37,11 @@ struct hts221_hw { bool enabled; u8 odr; + /* Ensure natural alignment of timestamp */ + struct { + __le16 channels[2]; + s64 ts __aligned(8); + } scan; }; extern const struct dev_pm_ops hts221_pm_ops; diff --git a/drivers/iio/humidity/hts221_buffer.c b/drivers/iio/humidity/hts221_buffer.c index 9fb3f33614d4..ba7d413d75ba 100644 --- a/drivers/iio/humidity/hts221_buffer.c +++ b/drivers/iio/humidity/hts221_buffer.c @@ -160,7 +160,6 @@ static const struct iio_buffer_setup_ops hts221_buffer_ops = { static irqreturn_t hts221_buffer_handler_thread(int irq, void *p) { - u8 buffer[ALIGN(2 * HTS221_DATA_SIZE, sizeof(s64)) + sizeof(s64)]; struct iio_poll_func *pf = p; struct iio_dev *iio_dev = pf->indio_dev; struct hts221_hw *hw = iio_priv(iio_dev); @@ -170,18 +169,20 @@ static irqreturn_t hts221_buffer_handler_thread(int irq, void *p) /* humidity data */ ch = &iio_dev->channels[HTS221_SENSOR_H]; err = regmap_bulk_read(hw->regmap, ch->address, - buffer, HTS221_DATA_SIZE); + &hw->scan.channels[0], + sizeof(hw->scan.channels[0])); if (err < 0) goto out; /* temperature data */ ch = &iio_dev->channels[HTS221_SENSOR_T]; err = regmap_bulk_read(hw->regmap, ch->address, - buffer + HTS221_DATA_SIZE, HTS221_DATA_SIZE); + &hw->scan.channels[1], + sizeof(hw->scan.channels[1])); if (err < 0) goto out; - iio_push_to_buffers_with_timestamp(iio_dev, buffer, + iio_push_to_buffers_with_timestamp(iio_dev, &hw->scan, iio_get_time_ns(iio_dev)); out: -- cgit v1.2.3 From 8db4afe163bbdd93dca6fcefbb831ef12ecc6b4d Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 7 Jun 2020 16:53:57 +0100 Subject: iio:pressure:ms5611 Fix buffer element alignment One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. Here there is no data leak possibility so use an explicit structure on the stack to ensure alignment and nice readable fashion. The forced alignment of ts isn't strictly necessary in this driver as the padding will be correct anyway (there isn't any). However it is probably less fragile to have it there and it acts as documentation of the requirement. Fixes: 713bbb4efb9dc ("iio: pressure: ms5611: Add triggered buffer support") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Acked-by: Tomasz Duszynski Cc: --- drivers/iio/pressure/ms5611_core.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c index 2f598ad91621..f5db9fa086f3 100644 --- a/drivers/iio/pressure/ms5611_core.c +++ b/drivers/iio/pressure/ms5611_core.c @@ -212,16 +212,21 @@ static irqreturn_t ms5611_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct ms5611_state *st = iio_priv(indio_dev); - s32 buf[4]; /* s32 (pressure) + s32 (temp) + 2 * s32 (timestamp) */ + /* Ensure buffer elements are naturally aligned */ + struct { + s32 channels[2]; + s64 ts __aligned(8); + } scan; int ret; mutex_lock(&st->lock); - ret = ms5611_read_temp_and_pressure(indio_dev, &buf[1], &buf[0]); + ret = ms5611_read_temp_and_pressure(indio_dev, &scan.channels[1], + &scan.channels[0]); mutex_unlock(&st->lock); if (ret < 0) goto err; - iio_push_to_buffers_with_timestamp(indio_dev, buf, + iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev)); err: -- cgit v1.2.3 From b0536f9826a5ed3328d527b4fc1686867a9f3041 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 17 May 2020 11:59:53 +0200 Subject: iio: adc: ad7780: Fix a resource handling path in 'ad7780_probe()' If 'ad7780_init_gpios()' fails, we must not release some resources that have not been allocated yet. Return directly instead. Fixes: 5bb30e7daf00 ("staging: iio: ad7780: move regulator to after GPIO init") Fixes: 9085daa4abcc ("staging: iio: ad7780: add gain & filter gpio support") Signed-off-by: Christophe JAILLET Acked-by: Renato Lui Geh Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7780.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ad7780.c b/drivers/iio/adc/ad7780.c index f47606ebbbbe..b33fe6c3907e 100644 --- a/drivers/iio/adc/ad7780.c +++ b/drivers/iio/adc/ad7780.c @@ -329,7 +329,7 @@ static int ad7780_probe(struct spi_device *spi) ret = ad7780_init_gpios(&spi->dev, st); if (ret) - goto error_cleanup_buffer_and_trigger; + return ret; st->reg = devm_regulator_get(&spi->dev, "avdd"); if (IS_ERR(st->reg)) -- cgit v1.2.3 From a4c0e91d1d65bc58f928b80ed824e10e165da22c Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 5 Jul 2020 21:33:11 +0200 Subject: x86/entry/32: Fix XEN_PV build dependency xenpv_exc_nmi() and xenpv_exc_debug() are only defined on 64-bit kernels, but they snuck into the 32-bit build via , causing the link to fail: ld: arch/x86/entry/entry_32.o: in function `asm_xenpv_exc_nmi': (.entry.text+0x817): undefined reference to `xenpv_exc_nmi' ld: arch/x86/entry/entry_32.o: in function `asm_xenpv_exc_debug': (.entry.text+0x827): undefined reference to `xenpv_exc_debug' Only use them on 64-bit kernels. Fixes: f41f0824224e: ("x86/entry/xen: Route #DB correctly on Xen PV") Cc: Andy Lutomirski Cc: Thomas Gleixner Cc: Peter Zijlstra (Intel) Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar --- arch/x86/include/asm/idtentry.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/idtentry.h b/arch/x86/include/asm/idtentry.h index eeac6dc2adaa..f3d70830bf2a 100644 --- a/arch/x86/include/asm/idtentry.h +++ b/arch/x86/include/asm/idtentry.h @@ -553,7 +553,7 @@ DECLARE_IDTENTRY_RAW(X86_TRAP_MC, exc_machine_check); /* NMI */ DECLARE_IDTENTRY_NMI(X86_TRAP_NMI, exc_nmi); -#ifdef CONFIG_XEN_PV +#if defined(CONFIG_XEN_PV) && defined(CONFIG_X86_64) DECLARE_IDTENTRY_RAW(X86_TRAP_NMI, xenpv_exc_nmi); #endif @@ -563,7 +563,7 @@ DECLARE_IDTENTRY_DEBUG(X86_TRAP_DB, exc_debug); #else DECLARE_IDTENTRY_RAW(X86_TRAP_DB, exc_debug); #endif -#ifdef CONFIG_XEN_PV +#if defined(CONFIG_XEN_PV) && defined(CONFIG_X86_64) DECLARE_IDTENTRY_RAW(X86_TRAP_DB, xenpv_exc_debug); #endif -- cgit v1.2.3 From bc4071aafcf4d0535ee423b69167696d6c03207d Mon Sep 17 00:00:00 2001 From: Evgeny Novikov Date: Fri, 3 Jul 2020 14:15:18 +0300 Subject: hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow aspeed_create_fan() reads a pwm_port value using of_property_read_u32(). If pwm_port will be more than ARRAY_SIZE(pwm_port_params), there will be a buffer overflow in aspeed_create_pwm_port()->aspeed_set_pwm_port_enable(). The patch fixes the potential buffer overflow. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov Link: https://lore.kernel.org/r/20200703111518.9644-1-novikov@ispras.ru Signed-off-by: Guenter Roeck --- drivers/hwmon/aspeed-pwm-tacho.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c index 33fb54845bf6..3d8239fd66ed 100644 --- a/drivers/hwmon/aspeed-pwm-tacho.c +++ b/drivers/hwmon/aspeed-pwm-tacho.c @@ -851,6 +851,8 @@ static int aspeed_create_fan(struct device *dev, ret = of_property_read_u32(child, "reg", &pwm_port); if (ret) return ret; + if (pwm_port >= ARRAY_SIZE(pwm_port_params)) + return -EINVAL; aspeed_create_pwm_port(priv, (u8)pwm_port); ret = of_property_count_u8_elems(child, "cooling-levels"); -- cgit v1.2.3 From 99ba8b9b0d9780e9937eb1d488d120e9e5c2533d Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Sun, 5 Jul 2020 14:56:20 +0300 Subject: dmaengine: dw: Initialize channel before each transfer In some cases DMA can be used only with a consumer which does runtime power management and on the platforms, that have DMA auto power gating logic (see comments in the drivers/acpi/acpi_lpss.c), may result in DMA losing its context. Simple mitigation of this issue is to initialize channel each time the consumer initiates a transfer. Fixes: cfdf5b6cc598 ("dw_dmac: add support for Lynxpoint DMA controllers") Reported-by: Tsuchiya Yuto Signed-off-by: Andy Shevchenko Acked-by: Viresh Kumar BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206403 Link: https://lore.kernel.org/r/20200705115620.51929-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul --- drivers/dma/dw/core.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index 21cb2a58dbd2..a1b56f52db2f 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -118,16 +118,11 @@ static void dwc_initialize(struct dw_dma_chan *dwc) { struct dw_dma *dw = to_dw_dma(dwc->chan.device); - if (test_bit(DW_DMA_IS_INITIALIZED, &dwc->flags)) - return; - dw->initialize_chan(dwc); /* Enable interrupts */ channel_set_bit(dw, MASK.XFER, dwc->mask); channel_set_bit(dw, MASK.ERROR, dwc->mask); - - set_bit(DW_DMA_IS_INITIALIZED, &dwc->flags); } /*----------------------------------------------------------------------*/ @@ -954,8 +949,6 @@ static void dwc_issue_pending(struct dma_chan *chan) void do_dw_dma_off(struct dw_dma *dw) { - unsigned int i; - dma_writel(dw, CFG, 0); channel_clear_bit(dw, MASK.XFER, dw->all_chan_mask); @@ -966,9 +959,6 @@ void do_dw_dma_off(struct dw_dma *dw) while (dma_readl(dw, CFG) & DW_CFG_DMA_EN) cpu_relax(); - - for (i = 0; i < dw->dma.chancnt; i++) - clear_bit(DW_DMA_IS_INITIALIZED, &dw->chan[i].flags); } void do_dw_dma_on(struct dw_dma *dw) @@ -1032,8 +1022,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan) /* Clear custom channel configuration */ memset(&dwc->dws, 0, sizeof(struct dw_dma_slave)); - clear_bit(DW_DMA_IS_INITIALIZED, &dwc->flags); - /* Disable interrupts */ channel_clear_bit(dw, MASK.XFER, dwc->mask); channel_clear_bit(dw, MASK.BLOCK, dwc->mask); -- cgit v1.2.3 From e142087b15960a4e1e5932942e5abae1f49d2318 Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Tue, 30 Jun 2020 00:59:58 +0800 Subject: dmaengine: fsl-edma-common: correct DSIZE_32BYTE Correct EDMA_TCD_ATTR_DSIZE_32BYTE define since it's broken by the below: '0x0005 --> BIT(3) | BIT(0))' Fixes: 4d6d3a90e4ac ("dmaengine: fsl-edma: fix macros") Signed-off-by: Robin Gong Tested-by: Angelo Dureghello Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1593449998-32091-1-git-send-email-yibin.gong@nxp.com Signed-off-by: Vinod Koul --- drivers/dma/fsl-edma-common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h index 67e422590c9a..ec1169741de1 100644 --- a/drivers/dma/fsl-edma-common.h +++ b/drivers/dma/fsl-edma-common.h @@ -33,7 +33,7 @@ #define EDMA_TCD_ATTR_DSIZE_16BIT BIT(0) #define EDMA_TCD_ATTR_DSIZE_32BIT BIT(1) #define EDMA_TCD_ATTR_DSIZE_64BIT (BIT(0) | BIT(1)) -#define EDMA_TCD_ATTR_DSIZE_32BYTE (BIT(3) | BIT(0)) +#define EDMA_TCD_ATTR_DSIZE_32BYTE (BIT(2) | BIT(0)) #define EDMA_TCD_ATTR_SSIZE_8BIT 0 #define EDMA_TCD_ATTR_SSIZE_16BIT (EDMA_TCD_ATTR_DSIZE_16BIT << 8) #define EDMA_TCD_ATTR_SSIZE_32BIT (EDMA_TCD_ATTR_DSIZE_32BIT << 8) -- cgit v1.2.3 From fd17d1abce426b4224a916a242b57be94272771b Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 1 Jul 2020 13:12:25 +0300 Subject: dmaengine: dmatest: stop completed threads when running without set channel The completed threads were not cleared and consequent run would result threads accumulating: echo 800000 > /sys/module/dmatest/parameters/test_buf_size echo 2000 > /sys/module/dmatest/parameters/timeout echo 50 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/max_channels echo "" > /sys/module/dmatest/parameters/channel [ 237.507265] dmatest: Added 1 threads using dma1chan2 echo 1 > /sys/module/dmatest/parameters/run [ 244.713360] dmatest: Started 1 threads using dma1chan2 [ 246.117680] dmatest: dma1chan2-copy0: summary 50 tests, 0 failures 2437.47 iops 977623 KB/s (0) echo 1 > /sys/module/dmatest/parameters/run [ 292.381471] dmatest: No channels configured, continue with any [ 292.389307] dmatest: Added 1 threads using dma1chan3 [ 292.394302] dmatest: Started 1 threads using dma1chan2 [ 292.399454] dmatest: Started 1 threads using dma1chan3 [ 293.800835] dmatest: dma1chan3-copy0: summary 50 tests, 0 failures 2624.53 iops 975014 KB/s (0) echo 1 > /sys/module/dmatest/parameters/run [ 307.301429] dmatest: No channels configured, continue with any [ 307.309212] dmatest: Added 1 threads using dma1chan4 [ 307.314197] dmatest: Started 1 threads using dma1chan2 [ 307.319343] dmatest: Started 1 threads using dma1chan3 [ 307.324492] dmatest: Started 1 threads using dma1chan4 [ 308.730773] dmatest: dma1chan4-copy0: summary 50 tests, 0 failures 2390.28 iops 965436 KB/s (0) Fixes: 6b41030fdc79 ("dmaengine: dmatest: Restore default for channel") Reported-by: Grygorii Strashko Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200701101225.8607-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul --- drivers/dma/dmatest.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index b175229a4b01..604f80357931 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -1176,6 +1176,8 @@ static int dmatest_run_set(const char *val, const struct kernel_param *kp) } else if (dmatest_run) { if (!is_threaded_test_pending(info)) { pr_info("No channels configured, continue with any\n"); + if (!is_threaded_test_run(info)) + stop_threaded_test(info); add_threaded_test(info); } start_threaded_tests(info); -- cgit v1.2.3 From 8678c71c17721e0f771f135967ef0cce8f69ce9a Mon Sep 17 00:00:00 2001 From: Angelo Dureghello Date: Thu, 2 Jul 2020 00:52:05 +0200 Subject: dmaengine: fsl-edma: fix wrong tcd endianness for big-endian cpu Due to recent fixes in m68k arch-specific I/O accessor macros, this driver is not working anymore for ColdFire. Fix wrong tcd endianness removing additional swaps, since edma_writex() functions should already take care of any eventual swap if needed. Note, i could only test the change in ColdFire mcf54415 and Vybrid vf50 / Colibri where i don't see any issue. So, every feedback and test for all other SoCs involved is really appreciated. Signed-off-by: Angelo Dureghello Reported-by: kbuild test robot Link: https://lore.kernel.org/r/20200701225205.1674463-1-angelo.dureghello@timesys.com Signed-off-by: Vinod Koul --- drivers/dma/fsl-edma-common.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c index 4550818cca4a..930ae268c497 100644 --- a/drivers/dma/fsl-edma-common.c +++ b/drivers/dma/fsl-edma-common.c @@ -352,26 +352,28 @@ static void fsl_edma_set_tcd_regs(struct fsl_edma_chan *fsl_chan, /* * TCD parameters are stored in struct fsl_edma_hw_tcd in little * endian format. However, we need to load the TCD registers in - * big- or little-endian obeying the eDMA engine model endian. + * big- or little-endian obeying the eDMA engine model endian, + * and this is performed from specific edma_write functions */ edma_writew(edma, 0, ®s->tcd[ch].csr); - edma_writel(edma, le32_to_cpu(tcd->saddr), ®s->tcd[ch].saddr); - edma_writel(edma, le32_to_cpu(tcd->daddr), ®s->tcd[ch].daddr); - edma_writew(edma, le16_to_cpu(tcd->attr), ®s->tcd[ch].attr); - edma_writew(edma, le16_to_cpu(tcd->soff), ®s->tcd[ch].soff); + edma_writel(edma, (s32)tcd->saddr, ®s->tcd[ch].saddr); + edma_writel(edma, (s32)tcd->daddr, ®s->tcd[ch].daddr); - edma_writel(edma, le32_to_cpu(tcd->nbytes), ®s->tcd[ch].nbytes); - edma_writel(edma, le32_to_cpu(tcd->slast), ®s->tcd[ch].slast); + edma_writew(edma, (s16)tcd->attr, ®s->tcd[ch].attr); + edma_writew(edma, tcd->soff, ®s->tcd[ch].soff); - edma_writew(edma, le16_to_cpu(tcd->citer), ®s->tcd[ch].citer); - edma_writew(edma, le16_to_cpu(tcd->biter), ®s->tcd[ch].biter); - edma_writew(edma, le16_to_cpu(tcd->doff), ®s->tcd[ch].doff); + edma_writel(edma, (s32)tcd->nbytes, ®s->tcd[ch].nbytes); + edma_writel(edma, (s32)tcd->slast, ®s->tcd[ch].slast); - edma_writel(edma, le32_to_cpu(tcd->dlast_sga), + edma_writew(edma, (s16)tcd->citer, ®s->tcd[ch].citer); + edma_writew(edma, (s16)tcd->biter, ®s->tcd[ch].biter); + edma_writew(edma, (s16)tcd->doff, ®s->tcd[ch].doff); + + edma_writel(edma, (s32)tcd->dlast_sga, ®s->tcd[ch].dlast_sga); - edma_writew(edma, le16_to_cpu(tcd->csr), ®s->tcd[ch].csr); + edma_writew(edma, (s16)tcd->csr, ®s->tcd[ch].csr); } static inline -- cgit v1.2.3 From 87730ccbddcb48478b1b88e88b14e73424130764 Mon Sep 17 00:00:00 2001 From: Leonid Ravich Date: Wed, 1 Jul 2020 21:48:12 +0300 Subject: dmaengine: ioat setting ioat timeout as module parameter DMA transaction time to completion is a function of PCI bandwidth, transaction size and a queue depth. So hard coded value for timeouts might be wrong for some scenarios. Signed-off-by: Leonid Ravich Reviewed-by: Dave Jiang Link: https://lore.kernel.org/r/20200701184816.29138-1-leonid.ravich@dell.com Signed-off-by: Vinod Koul --- drivers/dma/ioat/dma.c | 12 ++++++++++++ drivers/dma/ioat/dma.h | 2 -- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index 8ad0ad861c86..fd782aee02d9 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -26,6 +26,18 @@ #include "../dmaengine.h" +int completion_timeout = 200; +module_param(completion_timeout, int, 0644); +MODULE_PARM_DESC(completion_timeout, + "set ioat completion timeout [msec] (default 200 [msec])"); +int idle_timeout = 2000; +module_param(idle_timeout, int, 0644); +MODULE_PARM_DESC(idle_timeout, + "set ioat idel timeout [msec] (default 2000 [msec])"); + +#define IDLE_TIMEOUT msecs_to_jiffies(idle_timeout) +#define COMPLETION_TIMEOUT msecs_to_jiffies(completion_timeout) + static char *chanerr_str[] = { "DMA Transfer Source Address Error", "DMA Transfer Destination Address Error", diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index e6b622e1ba92..f7f31fdf14cf 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -104,8 +104,6 @@ struct ioatdma_chan { #define IOAT_RUN 5 #define IOAT_CHAN_ACTIVE 6 struct timer_list timer; - #define COMPLETION_TIMEOUT msecs_to_jiffies(100) - #define IDLE_TIMEOUT msecs_to_jiffies(2000) #define RESET_DELAY msecs_to_jiffies(100) struct ioatdma_device *ioat_dma; dma_addr_t completion_dma; -- cgit v1.2.3 From ed7815db70d17b1741883f2da8e1d80bc2efe517 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 6 Jul 2020 16:34:34 +0200 Subject: spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate A SPI transfer defines the _maximum_ speed of the SPI transfer. However the driver doesn't take into account that the clock divider is always rounded down (due to integer arithmetics). This results in a too high clock rate for the SPI transfer. E.g.: with a mclk_rate of 24 MHz and a SPI transfer speed of 10 MHz, the original code calculates a reg of "0", which results in a effective divider of "2" and a 12 MHz clock for the SPI transfer. This patch fixes the issue by using DIV_ROUND_UP() instead of a plain integer division. While there simplify the divider calculation for the CDR1 case, use order_base_2() instead of two ilog2() calculations. Fixes: 3558fe900e8a ("spi: sunxi: Add Allwinner A31 SPI controller driver") Signed-off-by: Marc Kleine-Budde Acked-by: Maxime Ripard Link: https://lore.kernel.org/r/20200706143443.9855-2-mkl@pengutronix.de Signed-off-by: Mark Brown --- drivers/spi/spi-sun6i.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index ecea15534c42..fa11cc0e809b 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -198,7 +198,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master, struct spi_transfer *tfr) { struct sun6i_spi *sspi = spi_master_get_devdata(master); - unsigned int mclk_rate, div, timeout; + unsigned int mclk_rate, div, div_cdr1, div_cdr2, timeout; unsigned int start, end, tx_time; unsigned int trig_level; unsigned int tx_len = 0; @@ -287,14 +287,12 @@ static int sun6i_spi_transfer_one(struct spi_master *master, * First try CDR2, and if we can't reach the expected * frequency, fall back to CDR1. */ - div = mclk_rate / (2 * tfr->speed_hz); - if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) { - if (div > 0) - div--; - - reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS; + div_cdr1 = DIV_ROUND_UP(mclk_rate, tfr->speed_hz); + div_cdr2 = DIV_ROUND_UP(div_cdr1, 2); + if (div_cdr2 <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) { + reg = SUN6I_CLK_CTL_CDR2(div_cdr2 - 1) | SUN6I_CLK_CTL_DRS; } else { - div = ilog2(mclk_rate) - ilog2(tfr->speed_hz); + div = min(SUN6I_CLK_CTL_CDR1_MASK, order_base_2(div_cdr1)); reg = SUN6I_CLK_CTL_CDR1(div); } -- cgit v1.2.3 From dcb00fc799dc03fd320e123e4c81b3278c763ea5 Mon Sep 17 00:00:00 2001 From: Ilya Katsnelson Date: Mon, 6 Jul 2020 15:27:43 -0700 Subject: Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen Tested on my own laptop, touchpad feels slightly more responsive with this on, though it might just be placebo. Signed-off-by: Ilya Katsnelson Reviewed-by: Lyude Paul Link: https://lore.kernel.org/r/20200703143457.132373-1-me@0upti.me Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 758dae8d6500..4b81b2d0fe06 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -179,6 +179,7 @@ static const char * const smbus_pnp_ids[] = { "LEN0093", /* T480 */ "LEN0096", /* X280 */ "LEN0097", /* X280 -> ALPS trackpoint */ + "LEN0099", /* X1 Extreme 1st */ "LEN009b", /* T580 */ "LEN200f", /* T450s */ "LEN2044", /* L470 */ -- cgit v1.2.3 From 966334dfc472bdfa67bed864842943b19755d192 Mon Sep 17 00:00:00 2001 From: Derek Basehore Date: Mon, 6 Jul 2020 17:39:41 -0700 Subject: Input: elan_i2c - only increment wakeup count on touch This moves the wakeup increment for elan devices to the touch report. This prevents the drivers from incorrectly reporting a wakeup when the resume callback resets then device, which causes an interrupt to occur. Signed-off-by: Derek Basehore Link: https://lore.kernel.org/r/20200706235046.1984283-1-dbasehore@chromium.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c_core.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 3f9354baac4b..6291fb5fa015 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -951,6 +951,8 @@ static void elan_report_absolute(struct elan_tp_data *data, u8 *packet) u8 hover_info = packet[ETP_HOVER_INFO_OFFSET]; bool contact_valid, hover_event; + pm_wakeup_event(&data->client->dev, 0); + hover_event = hover_info & 0x40; for (i = 0; i < ETP_MAX_FINGERS; i++) { contact_valid = tp_info & (1U << (3 + i)); @@ -974,6 +976,8 @@ static void elan_report_trackpoint(struct elan_tp_data *data, u8 *report) u8 *packet = &report[ETP_REPORT_ID_OFFSET + 1]; int x, y; + pm_wakeup_event(&data->client->dev, 0); + if (!data->tp_input) { dev_warn_once(&data->client->dev, "received a trackpoint report while no trackpoint device has been created. Please report upstream.\n"); @@ -998,7 +1002,6 @@ static void elan_report_trackpoint(struct elan_tp_data *data, u8 *report) static irqreturn_t elan_isr(int irq, void *dev_id) { struct elan_tp_data *data = dev_id; - struct device *dev = &data->client->dev; int error; u8 report[ETP_MAX_REPORT_LEN]; @@ -1016,8 +1019,6 @@ static irqreturn_t elan_isr(int irq, void *dev_id) if (error) goto out; - pm_wakeup_event(dev, 0); - switch (report[ETP_REPORT_ID_OFFSET]) { case ETP_REPORT_ID: elan_report_absolute(data, report); @@ -1026,7 +1027,7 @@ static irqreturn_t elan_isr(int irq, void *dev_id) elan_report_trackpoint(data, report); break; default: - dev_err(dev, "invalid report id data (%x)\n", + dev_err(&data->client->dev, "invalid report id data (%x)\n", report[ETP_REPORT_ID_OFFSET]); } -- cgit v1.2.3 From 93b9de223c0135db495c25334e66cb669bef13e2 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 6 Jul 2020 17:47:35 -0700 Subject: Revert "Input: elants_i2c - report resolution information for touch major" This reverts commit 061706716384f1633d3d5090b22a99f33f1fcf2f - it turns out that the resolution of 1 unit per mm was not correct for a number of touch screens, causing touch sizes to be reported as way too large. See https://crbug.com/1085648 Reported-by: Harry Cutts Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/elants_i2c.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 233cb1085bbd..5477a5718202 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -1325,7 +1325,6 @@ static int elants_i2c_probe(struct i2c_client *client, 0, MT_TOOL_PALM, 0, 0); input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res); input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res); - input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1); touchscreen_parse_properties(ts->input, true, &ts->prop); -- cgit v1.2.3 From 7f02bb6239f5e443cfe8af923ab2764561a833f6 Mon Sep 17 00:00:00 2001 From: Mazin Rezk Date: Sun, 5 Jul 2020 02:48:17 +0000 Subject: HID: logitech: Use HIDPP_RECEIVER_INDEX instead of 0xff MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some parts of hid-logitech-dj explicitly referred to 0xff for the receiver index. This patch changes those references to the HIDPP_RECEIVER_INDEX definition. Signed-off-by: Mazin Rezk Reviewed-by: Filipe Laíns Signed-off-by: Jiri Kosina --- drivers/hid/hid-logitech-dj.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index 48dff5d6b605..a78c13cc9f47 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -1153,7 +1153,7 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) if (!dj_report) return -ENOMEM; dj_report->report_id = REPORT_ID_DJ_SHORT; - dj_report->device_index = 0xFF; + dj_report->device_index = HIDPP_RECEIVER_INDEX; dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES; retval = logi_dj_recv_send_report(djrcv_dev, dj_report); kfree(dj_report); @@ -1175,7 +1175,7 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, if (djrcv_dev->type == recvr_type_dj) { dj_report->report_id = REPORT_ID_DJ_SHORT; - dj_report->device_index = 0xFF; + dj_report->device_index = HIDPP_RECEIVER_INDEX; dj_report->report_type = REPORT_TYPE_CMD_SWITCH; dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F; dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = @@ -1204,7 +1204,7 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, memset(buf, 0, HIDPP_REPORT_SHORT_LENGTH); buf[0] = REPORT_ID_HIDPP_SHORT; - buf[1] = 0xFF; + buf[1] = HIDPP_RECEIVER_INDEX; buf[2] = 0x80; buf[3] = 0x00; buf[4] = 0x00; -- cgit v1.2.3 From e13762abf38ead29071407f32b9dcec38f21dc34 Mon Sep 17 00:00:00 2001 From: "Maciej S. Szmigiero" Date: Sun, 5 Jul 2020 19:34:57 +0200 Subject: HID: logitech-hidpp: avoid repeated "multiplier = " log messages These messages appear each time the mouse wakes from sleep, in my case (Logitech M705), every minute or so. Let's downgrade them to the "debug" level so they don't fill the kernel log by default. While we are at it, let's make clear that this is a wheel multiplier (and not, for example, XY movement multiplier). Fixes: 4435ff2f09a2 ("HID: logitech: Enable high-resolution scrolling on Logitech mice") Cc: stable@vger.kernel.org Signed-off-by: Maciej S. Szmigiero Reviewed-by: Harry Cutts Signed-off-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index 1e1cf8eae649..b8b53dc95e86 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -3146,7 +3146,7 @@ static int hi_res_scroll_enable(struct hidpp_device *hidpp) multiplier = 1; hidpp->vertical_wheel_counter.wheel_multiplier = multiplier; - hid_info(hidpp->hid_dev, "multiplier = %d\n", multiplier); + hid_dbg(hidpp->hid_dev, "wheel multiplier = %d\n", multiplier); return 0; } -- cgit v1.2.3 From 58f30150ffd6d95efa524ff05bbcee4e95bfa870 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 7 Jul 2020 09:42:37 +0200 Subject: ASoC: core: Remove only the registered component in devm functions The ASoC devm_ functions that register a component (devm_snd_soc_register_component and devm_snd_dmaengine_pcm_register) will clean their component by running snd_soc_unregister_component. snd_soc_unregister_component will then remove all the components for the device that was used to register the component in the first place. However, some drivers register several components (such as a DAI and a dmaengine PCM) on the same device, and if the dmaengine PCM is registered first, then the DAI will be cleaned up first and snd_dmaengine_pcm_unregister will be called next. snd_dmaengine_pcm_unregister will then lookup the dmaengine PCM component on the device, and if there's one unregister that component and release its dmaengine channels. That doesn't happen in practice though since the first call to snd_soc_unregister_component removed all the components, so we never get the chance to release the dmaengine channels. In order to fix this, instead of removing all the components for a given device, we can simply remove the component that was registered in the first place. We should have the same number of component registration than we have components, so it should work just fine. Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200707074237.287171-1-maxime@cerno.tech Signed-off-by: Mark Brown --- include/sound/soc.h | 2 ++ sound/soc/soc-core.c | 27 +++++++++++++++++++++++++++ sound/soc/soc-devres.c | 8 +++++--- sound/soc/soc-generic-dmaengine-pcm.c | 2 +- 4 files changed, 35 insertions(+), 4 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index fddab504c227..9ad30135b537 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -444,6 +444,8 @@ int devm_snd_soc_register_component(struct device *dev, const struct snd_soc_component_driver *component_driver, struct snd_soc_dai_driver *dai_drv, int num_dai); void snd_soc_unregister_component(struct device *dev); +void snd_soc_unregister_component_by_driver(struct device *dev, + const struct snd_soc_component_driver *component_driver); struct snd_soc_component *snd_soc_lookup_component_nolocked(struct device *dev, const char *driver_name); struct snd_soc_component *snd_soc_lookup_component(struct device *dev, diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 0f30f5aabaa8..2b8abf88ec60 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2572,6 +2572,33 @@ int snd_soc_register_component(struct device *dev, } EXPORT_SYMBOL_GPL(snd_soc_register_component); +/** + * snd_soc_unregister_component_by_driver - Unregister component using a given driver + * from the ASoC core + * + * @dev: The device to unregister + * @component_driver: The component driver to unregister + */ +void snd_soc_unregister_component_by_driver(struct device *dev, + const struct snd_soc_component_driver *component_driver) +{ + struct snd_soc_component *component; + + if (!component_driver) + return; + + mutex_lock(&client_mutex); + component = snd_soc_lookup_component_nolocked(dev, component_driver->name); + if (!component) + goto out; + + snd_soc_del_component_unlocked(component); + +out: + mutex_unlock(&client_mutex); +} +EXPORT_SYMBOL_GPL(snd_soc_unregister_component_by_driver); + /** * snd_soc_unregister_component - Unregister all related component * from the ASoC core diff --git a/sound/soc/soc-devres.c b/sound/soc/soc-devres.c index 11e5d7962370..4534a1c03e8e 100644 --- a/sound/soc/soc-devres.c +++ b/sound/soc/soc-devres.c @@ -48,7 +48,9 @@ EXPORT_SYMBOL_GPL(devm_snd_soc_register_dai); static void devm_component_release(struct device *dev, void *res) { - snd_soc_unregister_component(*(struct device **)res); + const struct snd_soc_component_driver **cmpnt_drv = res; + + snd_soc_unregister_component_by_driver(dev, *cmpnt_drv); } /** @@ -65,7 +67,7 @@ int devm_snd_soc_register_component(struct device *dev, const struct snd_soc_component_driver *cmpnt_drv, struct snd_soc_dai_driver *dai_drv, int num_dai) { - struct device **ptr; + const struct snd_soc_component_driver **ptr; int ret; ptr = devres_alloc(devm_component_release, sizeof(*ptr), GFP_KERNEL); @@ -74,7 +76,7 @@ int devm_snd_soc_register_component(struct device *dev, ret = snd_soc_register_component(dev, cmpnt_drv, dai_drv, num_dai); if (ret == 0) { - *ptr = dev; + *ptr = cmpnt_drv; devres_add(dev, ptr); } else { devres_free(ptr); diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c index 80a4e71f2d95..61844403f181 100644 --- a/sound/soc/soc-generic-dmaengine-pcm.c +++ b/sound/soc/soc-generic-dmaengine-pcm.c @@ -478,7 +478,7 @@ void snd_dmaengine_pcm_unregister(struct device *dev) pcm = soc_component_to_pcm(component); - snd_soc_unregister_component(dev); + snd_soc_unregister_component_by_driver(dev, component->driver); dmaengine_pcm_release_chan(pcm); kfree(pcm); } -- cgit v1.2.3 From 503ed52225ed3d369c8e0dedf13556a7bc1e5c2b Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Mon, 6 Jul 2020 21:58:29 -0700 Subject: MAINTAINERS: Add Shengjiu to reviewer list of sound/soc/fsl Add Shengjiu who's actively working on the latest fsl/nxp audio drivers. Signed-off-by: Nicolin Chen Reviewed-by: Fabio Estevam Acked-by: Shengjiu Wang Link: https://lore.kernel.org/r/20200707045829.10002-1-nicoleotsuka@gmail.com Signed-off-by: Mark Brown --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 8a9dce123f6f..f7ac0a5aae42 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6876,6 +6876,7 @@ M: Timur Tabi M: Nicolin Chen M: Xiubo Li R: Fabio Estevam +R: Shengjiu Wang L: alsa-devel@alsa-project.org (moderated for non-subscribers) L: linuxppc-dev@lists.ozlabs.org S: Maintained -- cgit v1.2.3 From 04e484c5973ed0f9234c97685c3c5e1ebf0d6eb6 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Fri, 3 Jul 2020 15:05:50 +0800 Subject: btrfs: discard: add missing put when grabbing block group from unused list [BUG] The following small test script can trigger ASSERT() at unmount time: mkfs.btrfs -f $dev mount $dev $mnt mount -o remount,discard=async $mnt umount $mnt The call trace: assertion failed: atomic_read(&block_group->count) == 1, in fs/btrfs/block-group.c:3431 ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.h:3204! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 10389 Comm: umount Tainted: G O 5.8.0-rc3-custom+ #68 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: btrfs_free_block_groups.cold+0x22/0x55 [btrfs] close_ctree+0x2cb/0x323 [btrfs] btrfs_put_super+0x15/0x17 [btrfs] generic_shutdown_super+0x72/0x110 kill_anon_super+0x18/0x30 btrfs_kill_super+0x17/0x30 [btrfs] deactivate_locked_super+0x3b/0xa0 deactivate_super+0x40/0x50 cleanup_mnt+0x135/0x190 __cleanup_mnt+0x12/0x20 task_work_run+0x64/0xb0 __prepare_exit_to_usermode+0x1bc/0x1c0 __syscall_return_slowpath+0x47/0x230 do_syscall_64+0x64/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The code: ASSERT(atomic_read(&block_group->count) == 1); btrfs_put_block_group(block_group); [CAUSE] Obviously it's some btrfs_get_block_group() call doesn't get its put call. The offending btrfs_get_block_group() happens here: void btrfs_mark_bg_unused(struct btrfs_block_group *bg) { if (list_empty(&bg->bg_list)) { btrfs_get_block_group(bg); list_add_tail(&bg->bg_list, &fs_info->unused_bgs); } } So every call sites removing the block group from unused_bgs list should reduce the ref count of that block group. However for async discard, it didn't follow the call convention: void btrfs_discard_punt_unused_bgs_list(struct btrfs_fs_info *fs_info) { list_for_each_entry_safe(block_group, next, &fs_info->unused_bgs, bg_list) { list_del_init(&block_group->bg_list); btrfs_discard_queue_work(&fs_info->discard_ctl, block_group); } } And in btrfs_discard_queue_work(), it doesn't call btrfs_put_block_group() either. [FIX] Fix the problem by reducing the reference count when we grab the block group from unused_bgs list. Reported-by: Marcos Paulo de Souza Fixes: 6e80d4f8c422 ("btrfs: handle empty block_group removal for async discard") CC: stable@vger.kernel.org # 5.6+ Tested-by: Marcos Paulo de Souza Reviewed-by: Anand Jain Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/discard.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/discard.c b/fs/btrfs/discard.c index 5615320fa659..741c7e19c32f 100644 --- a/fs/btrfs/discard.c +++ b/fs/btrfs/discard.c @@ -619,6 +619,7 @@ void btrfs_discard_punt_unused_bgs_list(struct btrfs_fs_info *fs_info) list_for_each_entry_safe(block_group, next, &fs_info->unused_bgs, bg_list) { list_del_init(&block_group->bg_list); + btrfs_put_block_group(block_group); btrfs_discard_queue_work(&fs_info->discard_ctl, block_group); } spin_unlock(&fs_info->unused_bgs_lock); -- cgit v1.2.3 From f28e360f29031fdef8df3a1bcad666243bd6872d Mon Sep 17 00:00:00 2001 From: Naveen Krishna Chatradhi Date: Mon, 6 Jul 2020 22:47:15 +0530 Subject: hwmon: (amd_energy) match for supported models The energy counters of certain models seems to be reporting inconsistent values. Hence, match for the supported models. Signed-off-by: Naveen Krishna Chatradhi Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters") Link: https://lore.kernel.org/r/20200706171715.124993-1-nchatrad@amd.com Signed-off-by: Guenter Roeck --- drivers/hwmon/amd_energy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/amd_energy.c b/drivers/hwmon/amd_energy.c index e95b7426106e..29603742c858 100644 --- a/drivers/hwmon/amd_energy.c +++ b/drivers/hwmon/amd_energy.c @@ -362,7 +362,7 @@ static struct platform_driver amd_energy_driver = { static struct platform_device *amd_energy_platdev; static const struct x86_cpu_id cpu_ids[] __initconst = { - X86_MATCH_VENDOR_FAM(AMD, 0x17, NULL), + X86_MATCH_VENDOR_FAM_MODEL(AMD, 0x17, 0x31, NULL), {} }; MODULE_DEVICE_TABLE(x86cpu, cpu_ids); -- cgit v1.2.3 From 14b0e83dc4f1e52b94acaeb85a18fd7fdd46d2dc Mon Sep 17 00:00:00 2001 From: Vishwas M Date: Tue, 7 Jul 2020 19:57:47 +0530 Subject: hwmon: (emc2103) fix unable to change fan pwm1_enable attribute This patch fixes a bug which does not let FAN mode to be changed from sysfs(pwm1_enable). i.e pwm1_enable can not be set to 3, it will always remain at 0. This is caused because the device driver handles the result of "read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg)" incorrectly. The driver thinks an error has occurred if the (result != 0). This has been fixed by changing the condition to (result < 0). Signed-off-by: Vishwas M Link: https://lore.kernel.org/r/20200707142747.118414-1-vishwas.reddy.vr@gmail.com Fixes: 9df7305b5a86 ("hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller") Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/emc2103.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c index 491a570e8e50..924c02c1631d 100644 --- a/drivers/hwmon/emc2103.c +++ b/drivers/hwmon/emc2103.c @@ -443,7 +443,7 @@ static ssize_t pwm1_enable_store(struct device *dev, } result = read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg); - if (result) { + if (result < 0) { count = result; goto err; } -- cgit v1.2.3 From da6902e5b6dbca9081e3d377f9802d4fd0c5ea59 Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Tue, 7 Jul 2020 16:15:53 +0800 Subject: USB: serial: option: add Quectel EG95 LTE modem Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: AceLan Kao Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ef52841537dd..9b7cee98ea60 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -245,6 +245,7 @@ static void option_instat_callback(struct urb *urb); /* These Quectel products use Quectel's vendor ID */ #define QUECTEL_PRODUCT_EC21 0x0121 #define QUECTEL_PRODUCT_EC25 0x0125 +#define QUECTEL_PRODUCT_EG95 0x0195 #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 #define QUECTEL_PRODUCT_EM12 0x0512 @@ -1097,6 +1098,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25), .driver_info = RSVD(4) }, + { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95), + .driver_info = RSVD(4) }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), -- cgit v1.2.3 From 876d4e1e8298ad1f94d9e9392fc90486755437b4 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 7 Jul 2020 14:06:01 +0800 Subject: usb: chipidea: core: add wakeup support for extcon If wakeup event occurred by extcon event, it needs to call ci_irq again since the first ci_irq calling at extcon notifier only wakes up controller, but do noop for event handling, it causes the extcon use case can't work well from low power mode. Cc: Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Reported-by: Philippe Schenker Tested-by: Philippe Schenker Signed-off-by: Peter Chen Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 9a7c53d09ab4..bb133245beed 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -1243,6 +1243,29 @@ static void ci_controller_suspend(struct ci_hdrc *ci) enable_irq(ci->irq); } +/* + * Handle the wakeup interrupt triggered by extcon connector + * We need to call ci_irq again for extcon since the first + * interrupt (wakeup int) only let the controller be out of + * low power mode, but not handle any interrupts. + */ +static void ci_extcon_wakeup_int(struct ci_hdrc *ci) +{ + struct ci_hdrc_cable *cable_id, *cable_vbus; + u32 otgsc = hw_read_otgsc(ci, ~0); + + cable_id = &ci->platdata->id_extcon; + cable_vbus = &ci->platdata->vbus_extcon; + + if (!IS_ERR(cable_id->edev) && ci->is_otg && + (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) + ci_irq(ci->irq, ci); + + if (!IS_ERR(cable_vbus->edev) && ci->is_otg && + (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) + ci_irq(ci->irq, ci); +} + static int ci_controller_resume(struct device *dev) { struct ci_hdrc *ci = dev_get_drvdata(dev); @@ -1275,6 +1298,7 @@ static int ci_controller_resume(struct device *dev) enable_irq(ci->irq); if (ci_otg_is_fsm_mode(ci)) ci_otg_fsm_wakeup_by_srp(ci); + ci_extcon_wakeup_int(ci); } return 0; -- cgit v1.2.3 From 17d51429da722cd8fc77a365a112f008abf4f8b3 Mon Sep 17 00:00:00 2001 From: David Pedersen Date: Mon, 6 Jul 2020 18:48:51 -0700 Subject: Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list This fixes two finger trackpad scroll on the Lenovo XiaoXin Air 12. Without nomux, the trackpad behaves as if only one finger is present and moves the cursor when trying to scroll. Signed-off-by: David Pedersen Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200625133754.291325-1-limero1337@gmail.com Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 7b08ff8ddf35..7d7f73702726 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -425,6 +425,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "076804U"), }, }, + { + /* Lenovo XiaoXin Air 12 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "80UN"), + }, + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), -- cgit v1.2.3 From 0fd181456aa0826057adbfb6c79c40f4083cfd75 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Wed, 1 Jul 2020 22:14:54 +0900 Subject: scsi: mpt3sas: Fix error returns in BRM_status_show BRM_status_show() has several error branches, but none of them record the error in the error return. Also while at it remove the manual mutex_unlock() of the pci_access_mutex in case of an ongoing pci error recovery or host removal and jump to the cleanup label instead. Note: We can safely jump to out from here as io_unit_pg3 is initialized to NULL and if it hasn't been allocated, kfree() skips the NULL pointer. [mkp: compilation warning] Link: https://lore.kernel.org/r/20200701131454.5255-1-johannes.thumshirn@wdc.com Reviewed-by: Damien Le Moal Acked-by: Sreekanth Reddy Signed-off-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_ctl.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index e94e72de2fc6..983e568ff231 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -3149,15 +3149,14 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr, } /* pci_access_mutex lock acquired by sysfs show path */ mutex_lock(&ioc->pci_access_mutex); - if (ioc->pci_error_recovery || ioc->remove_host) { - mutex_unlock(&ioc->pci_access_mutex); - return 0; - } + if (ioc->pci_error_recovery || ioc->remove_host) + goto out; /* allocate upto GPIOVal 36 entries */ sz = offsetof(Mpi2IOUnitPage3_t, GPIOVal) + (sizeof(u16) * 36); io_unit_pg3 = kzalloc(sz, GFP_KERNEL); if (!io_unit_pg3) { + rc = -ENOMEM; ioc_err(ioc, "%s: failed allocating memory for iounit_pg3: (%d) bytes\n", __func__, sz); goto out; @@ -3167,6 +3166,7 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr, 0) { ioc_err(ioc, "%s: failed reading iounit_pg3\n", __func__); + rc = -EINVAL; goto out; } @@ -3174,12 +3174,14 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr, if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { ioc_err(ioc, "%s: iounit_pg3 failed with ioc_status(0x%04x)\n", __func__, ioc_status); + rc = -EINVAL; goto out; } if (io_unit_pg3->GPIOCount < 25) { ioc_err(ioc, "%s: iounit_pg3->GPIOCount less than 25 entries, detected (%d) entries\n", __func__, io_unit_pg3->GPIOCount); + rc = -EINVAL; goto out; } -- cgit v1.2.3 From e094fd346021b820f37188aaa6b502c7490ab5b5 Mon Sep 17 00:00:00 2001 From: Steve Schremmer Date: Tue, 7 Jul 2020 17:07:22 +0000 Subject: scsi: dh: Add Fujitsu device to devinfo and dh lists Add FUJITSU ETERNUS_AHB Link: https://lore.kernel.org/r/DM6PR06MB5276CCA765336BD312C4282E8C660@DM6PR06MB5276.namprd06.prod.outlook.com Signed-off-by: Steve Schremmer Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_devinfo.c | 1 + drivers/scsi/scsi_dh.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index eed31021e788..ba84244c1b4f 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -239,6 +239,7 @@ static struct { {"LSI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, {"ENGENIO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, {"LENOVO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, + {"FUJITSU", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, {"SanDisk", "Cruzer Blade", NULL, BLIST_TRY_VPD_PAGES | BLIST_INQUIRY_36}, {"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN | BLIST_INQUIRY_36}, diff --git a/drivers/scsi/scsi_dh.c b/drivers/scsi/scsi_dh.c index 42f0550d6b11..6f41e4b5a2b8 100644 --- a/drivers/scsi/scsi_dh.c +++ b/drivers/scsi/scsi_dh.c @@ -63,6 +63,7 @@ static const struct scsi_dh_blist scsi_dh_blist[] = { {"LSI", "INF-01-00", "rdac", }, {"ENGENIO", "INF-01-00", "rdac", }, {"LENOVO", "DE_Series", "rdac", }, + {"FUJITSU", "ETERNUS_AHB", "rdac", }, {NULL, NULL, NULL }, }; -- cgit v1.2.3 From ee769ebbe9e5fc7219e979fb7c5ed5bb5722649e Mon Sep 17 00:00:00 2001 From: Xu Wang Date: Wed, 8 Jul 2020 06:20:23 +0000 Subject: xtensa: simplify xtensa_pmu_irq_handler Use for_each_set_bit() instead of open-coding it to simplify the code. Signed-off-by: Xu Wang Message-Id: <20200708062023.7986-1-vulab@iscas.ac.cn> Signed-off-by: Max Filippov --- arch/xtensa/kernel/perf_event.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/xtensa/kernel/perf_event.c b/arch/xtensa/kernel/perf_event.c index 9bae79f70301..99fcd63ce597 100644 --- a/arch/xtensa/kernel/perf_event.c +++ b/arch/xtensa/kernel/perf_event.c @@ -362,9 +362,7 @@ irqreturn_t xtensa_pmu_irq_handler(int irq, void *dev_id) struct xtensa_pmu_events *ev = this_cpu_ptr(&xtensa_pmu_events); unsigned i; - for (i = find_first_bit(ev->used_mask, XCHAL_NUM_PERF_COUNTERS); - i < XCHAL_NUM_PERF_COUNTERS; - i = find_next_bit(ev->used_mask, XCHAL_NUM_PERF_COUNTERS, i + 1)) { + for_each_set_bit(i, ev->used_mask, XCHAL_NUM_PERF_COUNTERS) { uint32_t v = get_er(XTENSA_PMU_PMSTAT(i)); struct perf_event *event = ev->event[i]; struct hw_perf_event *hwc = &event->hw; -- cgit v1.2.3 From dbfb089d360b1cc623c51a2c7cf9b99eff78e0e7 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 3 Jul 2020 12:40:33 +0200 Subject: sched: Fix loadavg accounting race The recent commit: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") moved these lines in ttwu(): p->sched_contributes_to_load = !!task_contributes_to_load(p); p->state = TASK_WAKING; up before: smp_cond_load_acquire(&p->on_cpu, !VAL); into the 'p->on_rq == 0' block, with the thinking that once we hit schedule() the current task cannot change it's ->state anymore. And while this is true, it is both incorrect and flawed. It is incorrect in that we need at least an ACQUIRE on 'p->on_rq == 0' to avoid weak hardware from re-ordering things for us. This can fairly easily be achieved by relying on the control-dependency already in place. The second problem, which makes the flaw in the original argument, is that while schedule() will not change prev->state, it will read it a number of times (arguably too many times since it's marked volatile). The previous condition 'p->on_cpu == 0' was sufficient because that indicates schedule() has completed, and will no longer read prev->state. So now the trick is to make this same true for the (much) earlier 'prev->on_rq == 0' case. Furthermore, in order to make the ordering stick, the 'prev->on_rq = 0' assignment needs to he a RELEASE, but adding additional ordering to schedule() is an unwelcome proposition at the best of times, doubly so for mere accounting. Luckily we can push the prev->state load up before rq->lock, with the only caveat that we then have to re-read the state after. However, we know that if it changed, we no longer have to worry about the blocking path. This gives us the required ordering, if we block, we did the prev->state load before an (effective) smp_mb() and the p->on_rq store needs not change. With this we end up with the effective ordering: LOAD p->state LOAD-ACQUIRE p->on_rq == 0 MB STORE p->on_rq, 0 STORE p->state, TASK_WAKING which ensures the TASK_WAKING store happens after the prev->state load, and all is well again. Fixes: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") Reported-by: Dave Jones Reported-by: Paul Gortmaker Signed-off-by: Peter Zijlstra (Intel) Tested-by: Dave Jones Tested-by: Paul Gortmaker Link: https://lkml.kernel.org/r/20200707102957.GN117543@hirez.programming.kicks-ass.net --- include/linux/sched.h | 4 --- kernel/sched/core.c | 67 +++++++++++++++++++++++++++++++++++++++------------ 2 files changed, 51 insertions(+), 20 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 692e327d7455..683372943093 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -114,10 +114,6 @@ struct task_group; #define task_is_stopped_or_traced(task) ((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0) -#define task_contributes_to_load(task) ((task->state & TASK_UNINTERRUPTIBLE) != 0 && \ - (task->flags & PF_FROZEN) == 0 && \ - (task->state & TASK_NOLOAD) == 0) - #ifdef CONFIG_DEBUG_ATOMIC_SLEEP /* diff --git a/kernel/sched/core.c b/kernel/sched/core.c index ca5db40392d4..950ac45d5480 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -1311,9 +1311,6 @@ static inline void dequeue_task(struct rq *rq, struct task_struct *p, int flags) void activate_task(struct rq *rq, struct task_struct *p, int flags) { - if (task_contributes_to_load(p)) - rq->nr_uninterruptible--; - enqueue_task(rq, p, flags); p->on_rq = TASK_ON_RQ_QUEUED; @@ -1323,9 +1320,6 @@ void deactivate_task(struct rq *rq, struct task_struct *p, int flags) { p->on_rq = (flags & DEQUEUE_SLEEP) ? 0 : TASK_ON_RQ_MIGRATING; - if (task_contributes_to_load(p)) - rq->nr_uninterruptible++; - dequeue_task(rq, p, flags); } @@ -2236,10 +2230,10 @@ ttwu_do_activate(struct rq *rq, struct task_struct *p, int wake_flags, lockdep_assert_held(&rq->lock); -#ifdef CONFIG_SMP if (p->sched_contributes_to_load) rq->nr_uninterruptible--; +#ifdef CONFIG_SMP if (wake_flags & WF_MIGRATED) en_flags |= ENQUEUE_MIGRATED; #endif @@ -2583,7 +2577,7 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) * A similar smb_rmb() lives in try_invoke_on_locked_down_task(). */ smp_rmb(); - if (p->on_rq && ttwu_remote(p, wake_flags)) + if (READ_ONCE(p->on_rq) && ttwu_remote(p, wake_flags)) goto unlock; if (p->in_iowait) { @@ -2592,9 +2586,6 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) } #ifdef CONFIG_SMP - p->sched_contributes_to_load = !!task_contributes_to_load(p); - p->state = TASK_WAKING; - /* * Ensure we load p->on_cpu _after_ p->on_rq, otherwise it would be * possible to, falsely, observe p->on_cpu == 0. @@ -2613,8 +2604,20 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) * * Pairs with the LOCK+smp_mb__after_spinlock() on rq->lock in * __schedule(). See the comment for smp_mb__after_spinlock(). + * + * Form a control-dep-acquire with p->on_rq == 0 above, to ensure + * schedule()'s deactivate_task() has 'happened' and p will no longer + * care about it's own p->state. See the comment in __schedule(). */ - smp_rmb(); + smp_acquire__after_ctrl_dep(); + + /* + * We're doing the wakeup (@success == 1), they did a dequeue (p->on_rq + * == 0), which means we need to do an enqueue, change p->state to + * TASK_WAKING such that we can unlock p->pi_lock before doing the + * enqueue, such as ttwu_queue_wakelist(). + */ + p->state = TASK_WAKING; /* * If the owning (remote) CPU is still in the middle of schedule() with @@ -4097,6 +4100,7 @@ static void __sched notrace __schedule(bool preempt) { struct task_struct *prev, *next; unsigned long *switch_count; + unsigned long prev_state; struct rq_flags rf; struct rq *rq; int cpu; @@ -4113,12 +4117,22 @@ static void __sched notrace __schedule(bool preempt) local_irq_disable(); rcu_note_context_switch(preempt); + /* See deactivate_task() below. */ + prev_state = prev->state; + /* * Make sure that signal_pending_state()->signal_pending() below * can't be reordered with __set_current_state(TASK_INTERRUPTIBLE) - * done by the caller to avoid the race with signal_wake_up(). + * done by the caller to avoid the race with signal_wake_up(): + * + * __set_current_state(@state) signal_wake_up() + * schedule() set_tsk_thread_flag(p, TIF_SIGPENDING) + * wake_up_state(p, state) + * LOCK rq->lock LOCK p->pi_state + * smp_mb__after_spinlock() smp_mb__after_spinlock() + * if (signal_pending_state()) if (p->state & @state) * - * The membarrier system call requires a full memory barrier + * Also, the membarrier system call requires a full memory barrier * after coming from user-space, before storing to rq->curr. */ rq_lock(rq, &rf); @@ -4129,10 +4143,31 @@ static void __sched notrace __schedule(bool preempt) update_rq_clock(rq); switch_count = &prev->nivcsw; - if (!preempt && prev->state) { - if (signal_pending_state(prev->state, prev)) { + /* + * We must re-load prev->state in case ttwu_remote() changed it + * before we acquired rq->lock. + */ + if (!preempt && prev_state && prev_state == prev->state) { + if (signal_pending_state(prev_state, prev)) { prev->state = TASK_RUNNING; } else { + prev->sched_contributes_to_load = + (prev_state & TASK_UNINTERRUPTIBLE) && + !(prev_state & TASK_NOLOAD) && + !(prev->flags & PF_FROZEN); + + if (prev->sched_contributes_to_load) + rq->nr_uninterruptible++; + + /* + * __schedule() ttwu() + * prev_state = prev->state; if (READ_ONCE(p->on_rq) && ...) + * LOCK rq->lock goto out; + * smp_mb__after_spinlock(); smp_acquire__after_ctrl_dep(); + * p->on_rq = 0; p->state = TASK_WAKING; + * + * After this, schedule() must not care about p->state any more. + */ deactivate_task(rq, prev, DEQUEUE_SLEEP | DEQUEUE_NOCLOCK); if (prev->in_iowait) { -- cgit v1.2.3 From ce3614daabea8a2d01c1dd17ae41d1ec5e5ae7db Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Mon, 6 Jul 2020 16:49:10 -0400 Subject: sched: Fix unreliable rseq cpu_id for new tasks While integrating rseq into glibc and replacing glibc's sched_getcpu implementation with rseq, glibc's tests discovered an issue with incorrect __rseq_abi.cpu_id field value right after the first time a newly created process issues sched_setaffinity. For the records, it triggers after building glibc and running tests, and then issuing: for x in {1..2000} ; do posix/tst-affinity-static & done and shows up as: error: Unexpected CPU 2, expected 0 error: Unexpected CPU 2, expected 0 error: Unexpected CPU 2, expected 0 error: Unexpected CPU 2, expected 0 error: Unexpected CPU 138, expected 0 error: Unexpected CPU 138, expected 0 error: Unexpected CPU 138, expected 0 error: Unexpected CPU 138, expected 0 This is caused by the scheduler invoking __set_task_cpu() directly from sched_fork() and wake_up_new_task(), thus bypassing rseq_migrate() which is done by set_task_cpu(). Add the missing rseq_migrate() to both functions. The only other direct use of __set_task_cpu() is done by init_idle(), which does not involve a user-space task. Based on my testing with the glibc test-case, just adding rseq_migrate() to wake_up_new_task() is sufficient to fix the observed issue. Also add it to sched_fork() to keep things consistent. The reason why this never triggered so far with the rseq/basic_test selftest is unclear. The current use of sched_getcpu(3) does not typically require it to be always accurate. However, use of the __rseq_abi.cpu_id field within rseq critical sections requires it to be accurate. If it is not accurate, it can cause corruption in the per-cpu data targeted by rseq critical sections in user-space. Reported-By: Florian Weimer Signed-off-by: Mathieu Desnoyers Signed-off-by: Peter Zijlstra (Intel) Tested-By: Florian Weimer Cc: stable@vger.kernel.org # v4.18+ Link: https://lkml.kernel.org/r/20200707201505.2632-1-mathieu.desnoyers@efficios.com --- kernel/sched/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 950ac45d5480..e15543cb8481 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -2965,6 +2965,7 @@ int sched_fork(unsigned long clone_flags, struct task_struct *p) * Silence PROVE_RCU. */ raw_spin_lock_irqsave(&p->pi_lock, flags); + rseq_migrate(p); /* * We're setting the CPU for the first time, we don't migrate, * so use __set_task_cpu(). @@ -3029,6 +3030,7 @@ void wake_up_new_task(struct task_struct *p) * as we're not fully set-up yet. */ p->recent_used_cpu = task_cpu(p); + rseq_migrate(p); __set_task_cpu(p, select_task_rq(p, task_cpu(p), SD_BALANCE_FORK, 0)); #endif rq = __task_rq_lock(p, &rf); -- cgit v1.2.3 From 4557ac6b344b8cdf948ff8b007e8e1de34832f2e Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Wed, 8 Jul 2020 17:49:42 +1000 Subject: powerpc/64s/exception: Fix 0x1500 interrupt handler crash A typo caused the interrupt handler to branch immediately to the common "unknown interrupt" handler and skip the special case test for denormal cause. This does not affect KVM softpatch handling (e.g., for POWER9 TM assist) because the KVM test was moved to common code by commit 9600f261acaa ("powerpc/64s/exception: Move KVM test to common code") just before this bug was introduced. Fixes: 3f7fbd97d07d ("powerpc/64s/exception: Clean up SRR specifiers") Reported-by: Paul Menzel Signed-off-by: Nicholas Piggin Tested-by: Paul Menzel [mpe: Split selftest into a separate patch] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200708074942.1713396-1-npiggin@gmail.com --- arch/powerpc/kernel/exceptions-64s.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index fa080694e581..0fc8bad878b2 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -2551,7 +2551,7 @@ EXC_VIRT_NONE(0x5400, 0x100) INT_DEFINE_BEGIN(denorm_exception) IVEC=0x1500 IHSRR=1 - IBRANCH_COMMON=0 + IBRANCH_TO_COMMON=0 IKVM_REAL=1 INT_DEFINE_END(denorm_exception) -- cgit v1.2.3 From 25612477d20b522a3203707ff23575b99f639fff Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Tue, 7 Jul 2020 16:04:37 -0500 Subject: ASoC: soc-dai: set dai_link dpcm_ flags with a helper Add a helper to walk through all the DAIs and set dpcm_playback and dpcm_capture flags based on the DAIs capabilities, and use this helper to avoid setting these flags arbitrarily in generic cards. The commit referenced in the Fixes tag did not introduce the configuration issue but will prevent the card from probing when detecting invalid configurations. Fixes: b73287f0b0745 ('ASoC: soc-pcm: dpcm: fix playback/capture checks') Signed-off-by: Pierre-Louis Bossart Reviewed-by: Kai Vehmanen Reviewed-by: Guennadi Liakhovetski Link: https://lore.kernel.org/r/20200707210439.115300-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- include/sound/soc-dai.h | 1 + sound/soc/generic/audio-graph-card.c | 4 ++-- sound/soc/generic/simple-card.c | 4 ++-- sound/soc/soc-dai.c | 38 ++++++++++++++++++++++++++++++++++++ 4 files changed, 43 insertions(+), 4 deletions(-) diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h index 212257e84fac..71e178c89793 100644 --- a/include/sound/soc-dai.h +++ b/include/sound/soc-dai.h @@ -161,6 +161,7 @@ void snd_soc_dai_resume(struct snd_soc_dai *dai); int snd_soc_dai_compress_new(struct snd_soc_dai *dai, struct snd_soc_pcm_runtime *rtd, int num); bool snd_soc_dai_stream_valid(struct snd_soc_dai *dai, int stream); +void snd_soc_dai_link_set_capabilities(struct snd_soc_dai_link *dai_link); void snd_soc_dai_action(struct snd_soc_dai *dai, int stream, int action); static inline void snd_soc_dai_activate(struct snd_soc_dai *dai, diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c index 9ad35d9940fe..97b4f5480a31 100644 --- a/sound/soc/generic/audio-graph-card.c +++ b/sound/soc/generic/audio-graph-card.c @@ -317,8 +317,8 @@ static int graph_dai_link_of_dpcm(struct asoc_simple_priv *priv, if (ret < 0) goto out_put_node; - dai_link->dpcm_playback = 1; - dai_link->dpcm_capture = 1; + snd_soc_dai_link_set_capabilities(dai_link); + dai_link->ops = &graph_ops; dai_link->init = asoc_simple_dai_init; diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index 55e9f8800b3e..04d4d28ed511 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -231,8 +231,8 @@ static int simple_dai_link_of_dpcm(struct asoc_simple_priv *priv, if (ret < 0) goto out_put_node; - dai_link->dpcm_playback = 1; - dai_link->dpcm_capture = 1; + snd_soc_dai_link_set_capabilities(dai_link); + dai_link->ops = &simple_ops; dai_link->init = asoc_simple_dai_init; diff --git a/sound/soc/soc-dai.c b/sound/soc/soc-dai.c index b05e18b63a1c..457159975b01 100644 --- a/sound/soc/soc-dai.c +++ b/sound/soc/soc-dai.c @@ -391,6 +391,44 @@ bool snd_soc_dai_stream_valid(struct snd_soc_dai *dai, int dir) return stream->channels_min; } +/* + * snd_soc_dai_link_set_capabilities() - set dai_link properties based on its DAIs + */ +void snd_soc_dai_link_set_capabilities(struct snd_soc_dai_link *dai_link) +{ + struct snd_soc_dai_link_component *cpu; + struct snd_soc_dai_link_component *codec; + struct snd_soc_dai *dai; + bool supported[SNDRV_PCM_STREAM_LAST + 1]; + int direction; + int i; + + for_each_pcm_streams(direction) { + supported[direction] = true; + + for_each_link_cpus(dai_link, i, cpu) { + dai = snd_soc_find_dai(cpu); + if (!dai || !snd_soc_dai_stream_valid(dai, direction)) { + supported[direction] = false; + break; + } + } + if (!supported[direction]) + continue; + for_each_link_codecs(dai_link, i, codec) { + dai = snd_soc_find_dai(codec); + if (!dai || !snd_soc_dai_stream_valid(dai, direction)) { + supported[direction] = false; + break; + } + } + } + + dai_link->dpcm_playback = supported[SNDRV_PCM_STREAM_PLAYBACK]; + dai_link->dpcm_capture = supported[SNDRV_PCM_STREAM_CAPTURE]; +} +EXPORT_SYMBOL_GPL(snd_soc_dai_link_set_capabilities); + void snd_soc_dai_action(struct snd_soc_dai *dai, int stream, int action) { -- cgit v1.2.3 From fffebe8a8339c7e56db4126653a3bc0c0c5592cf Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Tue, 7 Jul 2020 16:04:38 -0500 Subject: ASoC: Intel: bdw-rt5677: fix non BE conversion When SOF is used, the normal links are converted into DPCM ones. This generates an error [ 58.276668] bdw-rt5677 bdw-rt5677: CPU DAI spi-RT5677AA:00 for rtd Wake on Voice does not support playback [ 58.276676] bdw-rt5677 bdw-rt5677: ASoC: can't create pcm Wake on Voice :-22 Fix by forcing the capture direction. Fixes: b73287f0b0745 ('ASoC: soc-pcm: dpcm: fix playback/capture checks') Signed-off-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Curtis Malainey Link: https://lore.kernel.org/r/20200707210439.115300-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/bdw-rt5677.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/intel/boards/bdw-rt5677.c b/sound/soc/intel/boards/bdw-rt5677.c index 5f96d7ac0a22..bed4d5f73d9c 100644 --- a/sound/soc/intel/boards/bdw-rt5677.c +++ b/sound/soc/intel/boards/bdw-rt5677.c @@ -354,6 +354,7 @@ static struct snd_soc_dai_link bdw_rt5677_dais[] = { { .name = "Codec DSP", .stream_name = "Wake on Voice", + .capture_only = 1, .ops = &bdw_rt5677_dsp_ops, SND_SOC_DAILINK_REG(dsp), }, -- cgit v1.2.3 From 4e7f8cac1171ba369a9209a8d949732a4d3b939a Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Tue, 7 Jul 2020 16:04:39 -0500 Subject: ASoC: SOF: imx: add min/max channels for SAI/ESAI on i.MX8/i.MX8M This is identical with change for Intel platforms done with commit 8c05246c0b58 ("ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/Broadwell") and fixes a regression on i.MX8/i.MX8M: [ 25.705750] esai-Codec: ASoC: no backend playback stream [ 27.923378] esai-Codec: ASoC: no users playback at close - state This is root-caused to the introduction of the DAI capability checks with snd_soc_dai_stream_valid(). Its use in soc-pcm.c makes it a requirement for all DAIs to report at least a non-zero min_channels field. Fixes: 9b5db059366ae2 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported") Signed-off-by: Daniel Baluta Signed-off-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Link: https://lore.kernel.org/r/20200707210439.115300-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/imx/imx8.c | 8 ++++++++ sound/soc/sof/imx/imx8m.c | 8 ++++++++ 2 files changed, 16 insertions(+) diff --git a/sound/soc/sof/imx/imx8.c b/sound/soc/sof/imx/imx8.c index 63f9c20a1bac..a4fa8451d8cb 100644 --- a/sound/soc/sof/imx/imx8.c +++ b/sound/soc/sof/imx/imx8.c @@ -375,6 +375,14 @@ static int imx8_ipc_pcm_params(struct snd_sof_dev *sdev, static struct snd_soc_dai_driver imx8_dai[] = { { .name = "esai-port", + .playback = { + .channels_min = 1, + .channels_max = 8, + }, + .capture = { + .channels_min = 1, + .channels_max = 8, + }, }, }; diff --git a/sound/soc/sof/imx/imx8m.c b/sound/soc/sof/imx/imx8m.c index fa86a9e2990f..287114a37688 100644 --- a/sound/soc/sof/imx/imx8m.c +++ b/sound/soc/sof/imx/imx8m.c @@ -240,6 +240,14 @@ static int imx8m_ipc_pcm_params(struct snd_sof_dev *sdev, static struct snd_soc_dai_driver imx8m_dai[] = { { .name = "sai-port", + .playback = { + .channels_min = 1, + .channels_max = 32, + }, + .capture = { + .channels_min = 1, + .channels_max = 32, + }, }, }; -- cgit v1.2.3 From 6f0307df83f2aa6bdf656c2219c89ce96502d20e Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Tue, 7 Jul 2020 15:37:45 -0500 Subject: ASoC: topology: fix kernel oops on route addition error When errors happens while loading graph components, the kernel oopses while trying to remove all topology components. This can be root-caused to a list pointing to memory that was already freed on error. remove_route() is already called on errors and will perform the required cleanups so there's no need to free the route memory in soc_tplg_dapm_graph_elems_load() if the route was added to the list. We do however want to free the routes allocated but not added to the list. Fixes: 7df04ea7a31ea ('ASoC: topology: modify dapm route loading routine and add dapm route unloading') Signed-off-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200707203749.113883-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/soc-topology.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 43e5745b06aa..f336a9cfc16f 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -1261,17 +1261,29 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg, list_add(&routes[i]->dobj.list, &tplg->comp->dobj_list); ret = soc_tplg_add_route(tplg, routes[i]); - if (ret < 0) + if (ret < 0) { + /* + * this route was added to the list, it will + * be freed in remove_route() so increment the + * counter to skip it in the error handling + * below. + */ + i++; break; + } /* add route, but keep going if some fail */ snd_soc_dapm_add_routes(dapm, routes[i], 1); } - /* free memory allocated for all dapm routes in case of error */ - if (ret < 0) - for (i = 0; i < count ; i++) - kfree(routes[i]); + /* + * free memory allocated for all dapm routes not added to the + * list in case of error + */ + if (ret < 0) { + while (i < count) + kfree(routes[i++]); + } /* * free pointer to array of dapm routes as this is no longer needed. -- cgit v1.2.3 From 8edac489e7c3fce44208373bb3e7b5835a672c66 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Tue, 7 Jul 2020 15:37:46 -0500 Subject: ASoC: topology: fix tlvs in error handling for widget_dmixer we need to free all allocated tlvs, not just the one allocated in the loop before releasing kcontrols - other the tlvs references will leak. Fixes: 9f90af3a995298 ('ASoC: topology: Consolidate and fix asoc_tplg_dapm_widget_*_create flow') Signed-off-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200707203749.113883-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/soc-topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index f336a9cfc16f..6eaa00c21011 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -1371,7 +1371,6 @@ static struct snd_kcontrol_new *soc_tplg_dapm_widget_dmixer_create( if (err < 0) { dev_err(tplg->dev, "ASoC: failed to init %s\n", mc->hdr.name); - soc_tplg_free_tlv(tplg, &kc[i]); goto err_sm; } } @@ -1379,6 +1378,7 @@ static struct snd_kcontrol_new *soc_tplg_dapm_widget_dmixer_create( err_sm: for (; i >= 0; i--) { + soc_tplg_free_tlv(tplg, &kc[i]); sm = (struct soc_mixer_control *)kc[i].private_value; kfree(sm); kfree(kc[i].name); -- cgit v1.2.3 From a53bacc04d7e2b813ebe0ca4dae38716c00d7953 Mon Sep 17 00:00:00 2001 From: Ryan Lee Date: Tue, 7 Jul 2020 15:57:36 -0500 Subject: ASoC: codecs: max98373: Removed superfluous volume control from chip default Volume control in probe function is not necessary. Signed-off-by: Ryan Lee Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200707205740.114927-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/codecs/max98373.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c index 96718e3a1ad0..ec247491e5a9 100644 --- a/sound/soc/codecs/max98373.c +++ b/sound/soc/codecs/max98373.c @@ -779,13 +779,6 @@ static int max98373_probe(struct snd_soc_component *component) regmap_write(max98373->regmap, MAX98373_R202A_PCM_TO_SPK_MONO_MIX_2, 0x1); - /* Set inital volume (0dB) */ - regmap_write(max98373->regmap, - MAX98373_R203D_AMP_DIG_VOL_CTRL, - 0x00); - regmap_write(max98373->regmap, - MAX98373_R203E_AMP_PATH_GAIN, - 0x00); /* Enable DC blocker */ regmap_write(max98373->regmap, MAX98373_R203F_AMP_DSP_CFG, -- cgit v1.2.3 From 0fd3935ef888b7231fde87eba3fdf613c4923b4a Mon Sep 17 00:00:00 2001 From: randerwang Date: Tue, 7 Jul 2020 15:57:37 -0500 Subject: ASoc: codecs: max98373: remove Idle_bias_on to let codec suspend Idle_bias_on is used to decide bias on/off in standby state by dapm. When Idle_bias_on is set to one, dapm will keep max98373 active at idle time. Max98373 is doing nothing in this state, so remove idle_bias_on setting to let max98373 get suspended when it is idle. Signed-off-by: randerwang Signed-off-by: Pierre-Louis Bossart Reviewed-by: Ryan Lee Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200707205740.114927-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/codecs/max98373.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c index ec247491e5a9..d87402a86c88 100644 --- a/sound/soc/codecs/max98373.c +++ b/sound/soc/codecs/max98373.c @@ -862,7 +862,6 @@ static const struct snd_soc_component_driver soc_codec_dev_max98373 = { .num_dapm_widgets = ARRAY_SIZE(max98373_dapm_widgets), .dapm_routes = max98373_audio_map, .num_dapm_routes = ARRAY_SIZE(max98373_audio_map), - .idle_bias_on = 1, .use_pmdown_time = 1, .endianness = 1, .non_legacy_dai_naming = 1, -- cgit v1.2.3 From eceb5437ed0d41be5d12af3add58b3be2d5719e5 Mon Sep 17 00:00:00 2001 From: Ranjani Sridharan Date: Tue, 7 Jul 2020 15:40:27 -0500 Subject: ASoC: SOF: core: fix null-ptr-deref bug during device removal The DSP should be notified for device removal only if the probe was successful. Fixes the following KASAN bug: BUG: KASAN: null-ptr-deref in sof_ipc_tx_message+0x80/0x160 [snd_sof] Signed-off-by: Ranjani Sridharan Signed-off-by: Pierre-Louis Bossart Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200707204027.114169-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c index 339c4930b0c0..adc7c37145d6 100644 --- a/sound/soc/sof/core.c +++ b/sound/soc/sof/core.c @@ -345,15 +345,15 @@ int snd_sof_device_remove(struct device *dev) struct snd_sof_pdata *pdata = sdev->pdata; int ret; - ret = snd_sof_dsp_power_down_notify(sdev); - if (ret < 0) - dev_warn(dev, "error: %d failed to prepare DSP for device removal", - ret); - if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)) cancel_work_sync(&sdev->probe_work); if (sdev->fw_state > SOF_FW_BOOT_NOT_STARTED) { + ret = snd_sof_dsp_power_down_notify(sdev); + if (ret < 0) + dev_warn(dev, "error: %d failed to prepare DSP for device removal", + ret); + snd_sof_fw_unload(sdev); snd_sof_ipc_free(sdev); snd_sof_free_debug(sdev); -- cgit v1.2.3 From 443a34ba68e8a627c15f9987b11cfa01f3e1ba0a Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Tue, 7 Jul 2020 15:26:28 -0500 Subject: regmap: add missing dependency on SoundWire CONFIG_REGMAP is not selected when no other serial bus is supported. It's largely academic since CONFIG_I2C is usually selected e.g. by DRM, but still this can break randconfig so let's be explicit. Signed-off-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200707202628.113142-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- drivers/base/regmap/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig index 0fd6f97ee523..1d1d26b0d279 100644 --- a/drivers/base/regmap/Kconfig +++ b/drivers/base/regmap/Kconfig @@ -4,7 +4,7 @@ # subsystems should select the appropriate symbols. config REGMAP - default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ || REGMAP_SCCB || REGMAP_I3C) + default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ || REGMAP_SOUNDWIRE || REGMAP_SCCB || REGMAP_I3C) select IRQ_DOMAIN if REGMAP_IRQ bool -- cgit v1.2.3 From a50ca29523b18baea548bdf5df9b4b923c2bb4f6 Mon Sep 17 00:00:00 2001 From: Dave Wang Date: Wed, 8 Jul 2020 22:25:03 -0700 Subject: Input: elan_i2c - add more hardware ID for Lenovo laptops This adds more hardware IDs for Elan touchpads found in various Lenovo laptops. Signed-off-by: Dave Wang Link: https://lore.kernel.org/r/000201d5a8bd$9fead3f0$dfc07bd0$@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- include/linux/input/elan-i2c-ids.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/linux/input/elan-i2c-ids.h b/include/linux/input/elan-i2c-ids.h index 1ecb6b45812c..520858d12680 100644 --- a/include/linux/input/elan-i2c-ids.h +++ b/include/linux/input/elan-i2c-ids.h @@ -67,8 +67,15 @@ static const struct acpi_device_id elan_acpi_id[] = { { "ELAN062B", 0 }, { "ELAN062C", 0 }, { "ELAN062D", 0 }, + { "ELAN062E", 0 }, /* Lenovo V340 Whiskey Lake U */ + { "ELAN062F", 0 }, /* Lenovo V340 Comet Lake U */ { "ELAN0631", 0 }, { "ELAN0632", 0 }, + { "ELAN0633", 0 }, /* Lenovo S145 */ + { "ELAN0634", 0 }, /* Lenovo V340 Ice lake */ + { "ELAN0635", 0 }, /* Lenovo V1415-IIL */ + { "ELAN0636", 0 }, /* Lenovo V1415-Dali */ + { "ELAN0637", 0 }, /* Lenovo V1415-IGLR */ { "ELAN1000", 0 }, { } }; -- cgit v1.2.3 From c1aac64ddc01112e137121a43645b96c3633c41b Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 4 Jun 2020 11:20:30 +0900 Subject: efi/libstub/arm64: link stub lib.a conditionally Since commit 799c43415442 ("kbuild: thin archives make default for all archs"), core-y is passed to the linker with --whole-archive. Hence, the whole of stub library is linked to vmlinux. Use libs-y so that lib.a is passed after --no-whole-archive for conditional linking. The unused drivers/firmware/efi/libstub/relocate.o will be dropped for ARCH=arm64. Signed-off-by: Masahiro Yamada Link: https://lore.kernel.org/r/20200604022031.164207-1-masahiroy@kernel.org Signed-off-by: Ard Biesheuvel --- arch/arm64/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 76359cfb328a..4621fb690d9c 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -143,7 +143,7 @@ export TEXT_OFFSET core-y += arch/arm64/ libs-y := arch/arm64/lib/ $(libs-y) -core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a +libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a # Default target when executing plain make boot := arch/arm64/boot -- cgit v1.2.3 From 950accbabd4cfa83519fa920f99428bcc131c3c9 Mon Sep 17 00:00:00 2001 From: Atish Patra Date: Thu, 25 Jun 2020 16:45:06 -0700 Subject: efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds 32bit gcc doesn't support modulo operation on 64 bit data. It results in a __umoddi3 error while building EFI for 32 bit. Use bitwise operations instead of modulo operations to fix the issue. Signed-off-by: Atish Patra Link: https://lore.kernel.org/r/20200625234516.31406-2-atish.patra@wdc.com Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/libstub/alignedmem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/efi/libstub/alignedmem.c b/drivers/firmware/efi/libstub/alignedmem.c index cc89c4d6196f..1de9878ddd3a 100644 --- a/drivers/firmware/efi/libstub/alignedmem.c +++ b/drivers/firmware/efi/libstub/alignedmem.c @@ -44,7 +44,7 @@ efi_status_t efi_allocate_pages_aligned(unsigned long size, unsigned long *addr, *addr = ALIGN((unsigned long)alloc_addr, align); if (slack > 0) { - int l = (alloc_addr % align) / EFI_PAGE_SIZE; + int l = (alloc_addr & (align - 1)) / EFI_PAGE_SIZE; if (l) { efi_bs_call(free_pages, alloc_addr, slack - l + 1); -- cgit v1.2.3 From 3230d95cea0515a6acf3f5ff360663de4c40fd07 Mon Sep 17 00:00:00 2001 From: Atish Patra Date: Mon, 6 Jul 2020 10:25:59 -0700 Subject: efi/libstub: Move the function prototypes to header file The prototype of the functions handle_kernel_image & efi_enter_kernel are defined in efi-stub.c which may result in a compiler warnings if -Wmissing-prototypes is set in gcc compiler. Move the prototype to efistub.h to make the compiler happy. Signed-off-by: Atish Patra Link: https://lore.kernel.org/r/20200706172609.25965-2-atish.patra@wdc.com Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/libstub/efi-stub.c | 17 ----------------- drivers/firmware/efi/libstub/efistub.h | 16 ++++++++++++++++ 2 files changed, 16 insertions(+), 17 deletions(-) diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c index 3318ec3f8e5b..a5a405d8ab44 100644 --- a/drivers/firmware/efi/libstub/efi-stub.c +++ b/drivers/firmware/efi/libstub/efi-stub.c @@ -121,23 +121,6 @@ static unsigned long get_dram_base(void) return membase; } -/* - * This function handles the architcture specific differences between arm and - * arm64 regarding where the kernel image must be loaded and any memory that - * must be reserved. On failure it is required to free all - * all allocations it has made. - */ -efi_status_t handle_kernel_image(unsigned long *image_addr, - unsigned long *image_size, - unsigned long *reserve_addr, - unsigned long *reserve_size, - unsigned long dram_base, - efi_loaded_image_t *image); - -asmlinkage void __noreturn efi_enter_kernel(unsigned long entrypoint, - unsigned long fdt_addr, - unsigned long fdt_size); - /* * EFI entry point for the arm/arm64 EFI stubs. This is the entrypoint * that is described in the PE/COFF header. Most of the code is the same diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h index 2c9d42264c29..85050f5a1b28 100644 --- a/drivers/firmware/efi/libstub/efistub.h +++ b/drivers/firmware/efi/libstub/efistub.h @@ -776,6 +776,22 @@ efi_status_t efi_load_initrd(efi_loaded_image_t *image, unsigned long *load_size, unsigned long soft_limit, unsigned long hard_limit); +/* + * This function handles the architcture specific differences between arm and + * arm64 regarding where the kernel image must be loaded and any memory that + * must be reserved. On failure it is required to free all + * all allocations it has made. + */ +efi_status_t handle_kernel_image(unsigned long *image_addr, + unsigned long *image_size, + unsigned long *reserve_addr, + unsigned long *reserve_size, + unsigned long dram_base, + efi_loaded_image_t *image); + +asmlinkage void __noreturn efi_enter_kernel(unsigned long entrypoint, + unsigned long fdt_addr, + unsigned long fdt_size); void efi_handle_post_ebs_state(void); -- cgit v1.2.3 From 2249357459c0a52608678c27ebc74c4238204057 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 30 Jun 2020 17:10:02 -0700 Subject: drm/aspeed: Call drm_fbdev_generic_setup after drm_dev_register The following backtrace is seen when running aspeed G5 kernels. WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/drm_fb_helper.c:2233 drm_fbdev_generic_setup+0x138/0x198 aspeed_gfx 1e6e6000.display: Device has not been registered. CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3 #1 Hardware name: Generic DT based system Backtrace: [<8010d6d0>] (dump_backtrace) from [<8010d9b8>] (show_stack+0x20/0x24) r7:00000009 r6:60000153 r5:00000000 r4:8119fa94 [<8010d998>] (show_stack) from [<80b8cb98>] (dump_stack+0xcc/0xec) [<80b8cacc>] (dump_stack) from [<80123ef0>] (__warn+0xd8/0xfc) r7:00000009 r6:80e62ed0 r5:00000000 r4:974c3ccc [<80123e18>] (__warn) from [<80123f98>] (warn_slowpath_fmt+0x84/0xc4) r9:00000009 r8:806a0140 r7:000008b9 r6:80e62ed0 r5:80e631f8 r4:974c2000 [<80123f18>] (warn_slowpath_fmt) from [<806a0140>] (drm_fbdev_generic_setup+0x138/0x198) r9:00000001 r8:9758fc10 r7:9758fc00 r6:00000000 r5:00000020 r4:9768a000 [<806a0008>] (drm_fbdev_generic_setup) from [<806d4558>] (aspeed_gfx_probe+0x204/0x32c) r7:9758fc00 r6:00000000 r5:00000000 r4:9768a000 [<806d4354>] (aspeed_gfx_probe) from [<806dfca0>] (platform_drv_probe+0x58/0xa8) Since commit 1aed9509b29a6 ("drm/fb-helper: Remove return value from drm_fbdev_generic_setup()"), drm_fbdev_generic_setup() must be called after drm_dev_register() to avoid the warning. Do that. Fixes: 1aed9509b29a6 ("drm/fb-helper: Remove return value from drm_fbdev_generic_setup()") Signed-off-by: Guenter Roeck Acked-by: Sam Ravnborg Acked-by: Joel Stanley Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20200701001002.74997-1-linux@roeck-us.net --- drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c index 6b27242b9ee3..bca3fcff16ec 100644 --- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c @@ -173,8 +173,6 @@ static int aspeed_gfx_load(struct drm_device *drm) drm_mode_config_reset(drm); - drm_fbdev_generic_setup(drm, 32); - return 0; } @@ -225,6 +223,7 @@ static int aspeed_gfx_probe(struct platform_device *pdev) if (ret) goto err_unload; + drm_fbdev_generic_setup(&priv->drm, 32); return 0; err_unload: -- cgit v1.2.3 From c3f595a8119207cc0f82b3dc6ec5bbf6f3e6b135 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 25 Jun 2020 10:34:32 +0300 Subject: usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant This patch adds the necessary PCI ID for TGP-H devices. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 96c05b121fac..47b7e83d9062 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -38,6 +38,7 @@ #define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee #define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e #define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee +#define PCI_DEVICE_ID_INTEL_TGPH 0x43ee #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -358,6 +359,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPLP), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPH), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */ -- cgit v1.2.3 From e25d1e8532c3d84f075deca1580a7d61e0f43ce6 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Tue, 30 Jun 2020 15:24:59 +0300 Subject: usb: dwc3: pci: add support for the Intel Jasper Lake This patch adds the necessary PCI ID for Intel Jasper Lake devices. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 47b7e83d9062..139474c3e77b 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -39,6 +39,7 @@ #define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e #define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee #define PCI_DEVICE_ID_INTEL_TGPH 0x43ee +#define PCI_DEVICE_ID_INTEL_JSP 0x4dee #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -362,6 +363,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPH), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_JSP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */ -- cgit v1.2.3 From 4a0f5a7f2bab80348ca1e4b996648a20746a2407 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 28 Jun 2020 20:08:03 -0700 Subject: usb: gadget: fix langid kernel-doc warning in usbstring.c Fix spelling of the 'langid' function argument in the kernel-doc notation to quieten a kernel-doc warning. ../drivers/usb/gadget/usbstring.c:77: warning: Function parameter or member 'langid' not described in 'usb_validate_langid' ../drivers/usb/gadget/usbstring.c:77: warning: Excess function parameter 'lang' description in 'usb_validate_langid' Fixes: 17309a6a4356 ("usb: gadget: add "usb_validate_langid" function") Signed-off-by: Randy Dunlap Reviewed-by: Tao Ren Cc: Tao Ren Cc: Felipe Balbi Signed-off-by: Felipe Balbi --- drivers/usb/gadget/usbstring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 58a4d3325090..119505fac777 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -68,7 +68,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_get_string); /** * usb_validate_langid - validate usb language identifiers - * @lang: usb language identifier + * @langid: usb language identifier * * Returns true for valid language identifier, otherwise false. */ -- cgit v1.2.3 From c8f8529e2c4141afa2ebb487ad48e8a6ec3e8c99 Mon Sep 17 00:00:00 2001 From: Evgeny Novikov Date: Fri, 26 Jun 2020 16:17:47 +0300 Subject: usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init() gr_ep_init() does not assign the allocated request anywhere if allocation of memory for the buffer fails. This is a memory leak fixed by the given patch. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/gr_udc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c index 7164ad9800f1..7419889ebe9a 100644 --- a/drivers/usb/gadget/udc/gr_udc.c +++ b/drivers/usb/gadget/udc/gr_udc.c @@ -1980,9 +1980,12 @@ static int gr_ep_init(struct gr_udc *dev, int num, int is_in, u32 maxplimit) if (num == 0) { _req = gr_alloc_request(&ep->ep, GFP_ATOMIC); + if (!_req) + return -ENOMEM; + buf = devm_kzalloc(dev->dev, PAGE_SIZE, GFP_DMA | GFP_ATOMIC); - if (!_req || !buf) { - /* possible _req freed by gr_probe via gr_remove */ + if (!buf) { + gr_free_request(&ep->ep, _req); return -ENOMEM; } -- cgit v1.2.3 From 9f81d45c79271def8a9b90447b04b9c6323291f9 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 3 Jun 2020 14:53:54 +0800 Subject: usb: cdns3: ep0: fix some endian issues It is found by sparse. Reported-by: kbuild test robot Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/cdns3/ep0.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c index 61ec5bb2b0ca..5aa69980e7ff 100644 --- a/drivers/usb/cdns3/ep0.c +++ b/drivers/usb/cdns3/ep0.c @@ -37,18 +37,18 @@ static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev, struct cdns3_usb_regs __iomem *regs = priv_dev->regs; struct cdns3_endpoint *priv_ep = priv_dev->eps[0]; - priv_ep->trb_pool[0].buffer = TRB_BUFFER(dma_addr); - priv_ep->trb_pool[0].length = TRB_LEN(length); + priv_ep->trb_pool[0].buffer = cpu_to_le32(TRB_BUFFER(dma_addr)); + priv_ep->trb_pool[0].length = cpu_to_le32(TRB_LEN(length)); if (zlp) { - priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_TYPE(TRB_NORMAL); - priv_ep->trb_pool[1].buffer = TRB_BUFFER(dma_addr); - priv_ep->trb_pool[1].length = TRB_LEN(0); - priv_ep->trb_pool[1].control = TRB_CYCLE | TRB_IOC | - TRB_TYPE(TRB_NORMAL); + priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_TYPE(TRB_NORMAL)); + priv_ep->trb_pool[1].buffer = cpu_to_le32(TRB_BUFFER(dma_addr)); + priv_ep->trb_pool[1].length = cpu_to_le32(TRB_LEN(0)); + priv_ep->trb_pool[1].control = cpu_to_le32(TRB_CYCLE | TRB_IOC | + TRB_TYPE(TRB_NORMAL)); } else { - priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_IOC | - TRB_TYPE(TRB_NORMAL); + priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_IOC | + TRB_TYPE(TRB_NORMAL)); priv_ep->trb_pool[1].control = 0; } @@ -264,11 +264,11 @@ static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev, case USB_RECIP_INTERFACE: return cdns3_ep0_delegate_req(priv_dev, ctrl); case USB_RECIP_ENDPOINT: - index = cdns3_ep_addr_to_index(ctrl->wIndex); + index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex)); priv_ep = priv_dev->eps[index]; /* check if endpoint is stalled or stall is pending */ - cdns3_select_ep(priv_dev, ctrl->wIndex); + cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex)); if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts)) || (priv_ep->flags & EP_STALL_PENDING)) usb_status = BIT(USB_ENDPOINT_HALT); @@ -381,10 +381,10 @@ static int cdns3_ep0_feature_handle_endpoint(struct cdns3_device *priv_dev, if (!(ctrl->wIndex & ~USB_DIR_IN)) return 0; - index = cdns3_ep_addr_to_index(ctrl->wIndex); + index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex)); priv_ep = priv_dev->eps[index]; - cdns3_select_ep(priv_dev, ctrl->wIndex); + cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex)); if (set) __cdns3_gadget_ep_set_halt(priv_ep); @@ -445,7 +445,7 @@ static int cdns3_req_ep0_set_sel(struct cdns3_device *priv_dev, if (priv_dev->gadget.state < USB_STATE_ADDRESS) return -EINVAL; - if (ctrl_req->wLength != 6) { + if (le16_to_cpu(ctrl_req->wLength) != 6) { dev_err(priv_dev->dev, "Set SEL should be 6 bytes, got %d\n", ctrl_req->wLength); return -EINVAL; @@ -469,7 +469,7 @@ static int cdns3_req_ep0_set_isoch_delay(struct cdns3_device *priv_dev, if (ctrl_req->wIndex || ctrl_req->wLength) return -EINVAL; - priv_dev->isoch_delay = ctrl_req->wValue; + priv_dev->isoch_delay = le16_to_cpu(ctrl_req->wValue); return 0; } -- cgit v1.2.3 From 65b7cf48c211ece5e2560a334eb9608e48775a8f Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 3 Jun 2020 14:53:55 +0800 Subject: usb: cdns3: trace: fix some endian issues It is found by sparse. Reported-by: kbuild test robot Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/cdns3/trace.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/cdns3/trace.h b/drivers/usb/cdns3/trace.h index 755c56582257..0a2a3269bfac 100644 --- a/drivers/usb/cdns3/trace.h +++ b/drivers/usb/cdns3/trace.h @@ -404,9 +404,9 @@ DECLARE_EVENT_CLASS(cdns3_log_trb, TP_fast_assign( __assign_str(name, priv_ep->name); __entry->trb = trb; - __entry->buffer = trb->buffer; - __entry->length = trb->length; - __entry->control = trb->control; + __entry->buffer = le32_to_cpu(trb->buffer); + __entry->length = le32_to_cpu(trb->length); + __entry->control = le32_to_cpu(trb->control); __entry->type = usb_endpoint_type(priv_ep->endpoint.desc); __entry->last_stream_id = priv_ep->last_stream_id; ), -- cgit v1.2.3 From 4fdf228cdf6925af45a2066d403821e0977bfddb Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Sat, 30 May 2020 11:41:50 +0400 Subject: usb: dwc2: Fix shutdown callback in platform To avoid lot of interrupts from dwc2 core, which can be asserted in specific conditions need to disable interrupts on HW level instead of disable IRQs on Kernel level, because of IRQ can be shared between drivers. Cc: stable@vger.kernel.org Fixes: a40a00318c7fc ("usb: dwc2: add shutdown callback to platform variant") Tested-by: Frank Mori Hess Reviewed-by: Alan Stern Reviewed-by: Doug Anderson Reviewed-by: Frank Mori Hess Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/platform.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index c347d93eae64..cb8ddbd53718 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -342,7 +342,8 @@ static void dwc2_driver_shutdown(struct platform_device *dev) { struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); - disable_irq(hsotg->irq); + dwc2_disable_global_interrupts(hsotg); + synchronize_irq(hsotg->irq); } /** -- cgit v1.2.3 From 9706247d94165ef9d6f7f00308e1cd7e0cc9251d Mon Sep 17 00:00:00 2001 From: Michał Mirosław Date: Thu, 28 May 2020 20:35:53 +0200 Subject: usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixed commit removed the offending behaviour from the driver, but missed the comment and associated test. Remove them now. Fixes: 38e58986e6fc ("usb: gadget: udc: atmel: don't disable enpdoints we don't own") Signed-off-by: Michał Mirosław Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/atmel_usba_udc.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index d69f61ff0181..9153e220848d 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -676,13 +676,7 @@ static int usba_ep_disable(struct usb_ep *_ep) if (!ep->ep.desc) { spin_unlock_irqrestore(&udc->lock, flags); - /* REVISIT because this driver disables endpoints in - * reset_all_endpoints() before calling disconnect(), - * most gadget drivers would trigger this non-error ... - */ - if (udc->gadget.speed != USB_SPEED_UNKNOWN) - DBG(DBG_ERR, "ep_disable: %s not enabled\n", - ep->ep.name); + DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name); return -EINVAL; } ep->ep.desc = NULL; -- cgit v1.2.3 From 30517ffeb3bff842e1355cbc32f1959d9dbb5414 Mon Sep 17 00:00:00 2001 From: Michał Mirosław Date: Thu, 28 May 2020 20:35:54 +0200 Subject: usb: gadget: udc: atmel: fix uninitialized read in debug printk MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixed commit moved the assignment of 'req', but did not update a reference in the DBG() call. Use the argument as it was renamed. Fixes: 5fb694f96e7c ("usb: gadget: udc: atmel: fix possible oops when unloading module") Signed-off-by: Michał Mirosław Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/atmel_usba_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 9153e220848d..9342a3d24963 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -865,7 +865,7 @@ static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) u32 status; DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n", - ep->ep.name, req); + ep->ep.name, _req); spin_lock_irqsave(&udc->lock, flags); -- cgit v1.2.3 From 8778eb0927ddcd3f431805c37b78fa56481aeed9 Mon Sep 17 00:00:00 2001 From: Zhang Qiang Date: Mon, 6 Jul 2020 13:14:55 +0800 Subject: usb: gadget: function: fix missing spinlock in f_uac1_legacy Add a missing spinlock protection for play_queue, because the play_queue may be destroyed when the "playback_work" work func and "f_audio_out_ep_complete" callback func operate this paly_queue at the same time. Fixes: c6994e6f067cf ("USB: gadget: add USB Audio Gadget driver") Cc: stable Signed-off-by: Zhang Qiang Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_uac1_legacy.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/function/f_uac1_legacy.c b/drivers/usb/gadget/function/f_uac1_legacy.c index 349deae7cabd..e2d7f69128a0 100644 --- a/drivers/usb/gadget/function/f_uac1_legacy.c +++ b/drivers/usb/gadget/function/f_uac1_legacy.c @@ -336,7 +336,9 @@ static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req) /* Copy buffer is full, add it to the play_queue */ if (audio_buf_size - copy_buf->actual < req->actual) { + spin_lock_irq(&audio->lock); list_add_tail(©_buf->list, &audio->play_queue); + spin_unlock_irq(&audio->lock); schedule_work(&audio->playback_work); copy_buf = f_audio_buffer_alloc(audio_buf_size); if (IS_ERR(copy_buf)) -- cgit v1.2.3 From f88814cc2578c121e6edef686365036db72af0ed Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 8 Jul 2020 13:01:57 +0300 Subject: efi/efivars: Expose RT service availability via efivars abstraction Commit bf67fad19e493b ("efi: Use more granular check for availability for variable services") introduced a check into the efivarfs, efi-pstore and other drivers that aborts loading of the module if not all three variable runtime services (GetVariable, SetVariable and GetNextVariable) are supported. However, this results in efivarfs being unavailable entirely if only SetVariable support is missing, which is only needed if you want to make any modifications. Also, efi-pstore and the sysfs EFI variable interface could be backed by another implementation of the 'efivars' abstraction, in which case it is completely irrelevant which services are supported by the EFI firmware. So make the generic 'efivars' abstraction dependent on the availibility of the GetVariable and GetNextVariable EFI runtime services, and add a helper 'efivar_supports_writes()' to find out whether the currently active efivars abstraction supports writes (and wire it up to the availability of SetVariable for the generic one). Then, use the efivar_supports_writes() helper to decide whether to permit efivarfs to be mounted read-write, and whether to enable efi-pstore or the sysfs EFI variable interface altogether. Fixes: bf67fad19e493b ("efi: Use more granular check for availability for variable services") Reported-by: Heinrich Schuchardt Acked-by: Ilias Apalodimas Tested-by: Ilias Apalodimas Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/efi-pstore.c | 5 +---- drivers/firmware/efi/efi.c | 12 ++++++++---- drivers/firmware/efi/efivars.c | 5 +---- drivers/firmware/efi/vars.c | 6 ++++++ fs/efivarfs/super.c | 6 +++--- include/linux/efi.h | 1 + 6 files changed, 20 insertions(+), 15 deletions(-) diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c index c2f1d4e6630b..feb7fe6f2da7 100644 --- a/drivers/firmware/efi/efi-pstore.c +++ b/drivers/firmware/efi/efi-pstore.c @@ -356,10 +356,7 @@ static struct pstore_info efi_pstore_info = { static __init int efivars_pstore_init(void) { - if (!efi_rt_services_supported(EFI_RT_SUPPORTED_VARIABLE_SERVICES)) - return 0; - - if (!efivars_kobject()) + if (!efivars_kobject() || !efivar_supports_writes()) return 0; if (efivars_pstore_disable) diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index 5114cae4ec97..fdd1db025dbf 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -176,11 +176,13 @@ static struct efivar_operations generic_ops; static int generic_ops_register(void) { generic_ops.get_variable = efi.get_variable; - generic_ops.set_variable = efi.set_variable; - generic_ops.set_variable_nonblocking = efi.set_variable_nonblocking; generic_ops.get_next_variable = efi.get_next_variable; generic_ops.query_variable_store = efi_query_variable_store; + if (efi_rt_services_supported(EFI_RT_SUPPORTED_SET_VARIABLE)) { + generic_ops.set_variable = efi.set_variable; + generic_ops.set_variable_nonblocking = efi.set_variable_nonblocking; + } return efivars_register(&generic_efivars, &generic_ops, efi_kobj); } @@ -382,7 +384,8 @@ static int __init efisubsys_init(void) return -ENOMEM; } - if (efi_rt_services_supported(EFI_RT_SUPPORTED_VARIABLE_SERVICES)) { + if (efi_rt_services_supported(EFI_RT_SUPPORTED_GET_VARIABLE | + EFI_RT_SUPPORTED_GET_NEXT_VARIABLE_NAME)) { efivar_ssdt_load(); error = generic_ops_register(); if (error) @@ -416,7 +419,8 @@ static int __init efisubsys_init(void) err_remove_group: sysfs_remove_group(efi_kobj, &efi_subsys_attr_group); err_unregister: - if (efi_rt_services_supported(EFI_RT_SUPPORTED_VARIABLE_SERVICES)) + if (efi_rt_services_supported(EFI_RT_SUPPORTED_GET_VARIABLE | + EFI_RT_SUPPORTED_GET_NEXT_VARIABLE_NAME)) generic_ops_unregister(); err_put: kobject_put(efi_kobj); diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c index 26528a46d99e..dcea137142b3 100644 --- a/drivers/firmware/efi/efivars.c +++ b/drivers/firmware/efi/efivars.c @@ -680,11 +680,8 @@ int efivars_sysfs_init(void) struct kobject *parent_kobj = efivars_kobject(); int error = 0; - if (!efi_rt_services_supported(EFI_RT_SUPPORTED_VARIABLE_SERVICES)) - return -ENODEV; - /* No efivars has been registered yet */ - if (!parent_kobj) + if (!parent_kobj || !efivar_supports_writes()) return 0; printk(KERN_INFO "EFI Variables Facility v%s %s\n", EFIVARS_VERSION, diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c index 5f2a4d162795..973eef234b36 100644 --- a/drivers/firmware/efi/vars.c +++ b/drivers/firmware/efi/vars.c @@ -1229,3 +1229,9 @@ out: return rv; } EXPORT_SYMBOL_GPL(efivars_unregister); + +int efivar_supports_writes(void) +{ + return __efivars && __efivars->ops->set_variable; +} +EXPORT_SYMBOL_GPL(efivar_supports_writes); diff --git a/fs/efivarfs/super.c b/fs/efivarfs/super.c index 12c66f5d92dd..28bb5689333a 100644 --- a/fs/efivarfs/super.c +++ b/fs/efivarfs/super.c @@ -201,6 +201,9 @@ static int efivarfs_fill_super(struct super_block *sb, struct fs_context *fc) sb->s_d_op = &efivarfs_d_ops; sb->s_time_gran = 1; + if (!efivar_supports_writes()) + sb->s_flags |= SB_RDONLY; + inode = efivarfs_get_inode(sb, NULL, S_IFDIR | 0755, 0, true); if (!inode) return -ENOMEM; @@ -252,9 +255,6 @@ static struct file_system_type efivarfs_type = { static __init int efivarfs_init(void) { - if (!efi_rt_services_supported(EFI_RT_SUPPORTED_VARIABLE_SERVICES)) - return -ENODEV; - if (!efivars_kobject()) return -ENODEV; diff --git a/include/linux/efi.h b/include/linux/efi.h index bb35f3305e55..05c47f857383 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -994,6 +994,7 @@ int efivars_register(struct efivars *efivars, int efivars_unregister(struct efivars *efivars); struct kobject *efivars_kobject(void); +int efivar_supports_writes(void); int efivar_init(int (*func)(efi_char16_t *, efi_guid_t, unsigned long, void *), void *data, bool duplicates, struct list_head *head); -- cgit v1.2.3 From 769e0fe1171e95d90ea5a2d6d0b2bdc7d5d2e7b2 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Thu, 9 Jul 2020 09:59:57 +0300 Subject: efi: Revert "efi/x86: Fix build with gcc 4" This reverts commit 5435f73d5c4a1b75, which is no longer needed now that the minimum GCC version has been bumped to v4.9 Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/libstub/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile index 4cce372edaf4..75daaf20374e 100644 --- a/drivers/firmware/efi/libstub/Makefile +++ b/drivers/firmware/efi/libstub/Makefile @@ -6,8 +6,7 @@ # enabled, even if doing so doesn't break the build. # cflags-$(CONFIG_X86_32) := -march=i386 -cflags-$(CONFIG_X86_64) := -mcmodel=small \ - $(call cc-option,-maccumulate-outgoing-args) +cflags-$(CONFIG_X86_64) := -mcmodel=small cflags-$(CONFIG_X86) += -m$(BITS) -D__KERNEL__ \ -fPIC -fno-strict-aliasing -mno-red-zone \ -mno-mmx -mno-sse -fshort-wchar \ -- cgit v1.2.3 From bce9b042ec73e8662b8119d4ca47e7c78b20d0bf Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 8 Jul 2020 21:28:05 +0200 Subject: x86/traps: Disable interrupts in exc_aligment_check() exc_alignment_check() fails to disable interrupts before returning to the entry code. Fixes: ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code") Reported-by: syzbot+0889df9502bc0f112b31@syzkaller.appspotmail.com Signed-off-by: Thomas Gleixner Acked-by: Andy Lutomirski Link: https://lkml.kernel.org/r/20200708192934.076519438@linutronix.de --- arch/x86/kernel/traps.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 6ed8cc5fbe8f..4f3a509e5547 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -299,6 +299,8 @@ DEFINE_IDTENTRY_ERRORCODE(exc_alignment_check) do_trap(X86_TRAP_AC, SIGBUS, "alignment check", regs, error_code, BUS_ADRALN, NULL); + + local_irq_disable(); } #ifdef CONFIG_VMAP_STACK -- cgit v1.2.3 From 006e1ced516d2bfd9db63a32b5dba3c2abf43b04 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 8 Jul 2020 21:28:06 +0200 Subject: x86/entry: Mark check_user_regs() noinstr It's called from the non-instrumentable section. Fixes: c9c26150e61d ("x86/entry: Assert that syscalls are on the right stack") Signed-off-by: Thomas Gleixner Acked-by: Andy Lutomirski Link: https://lkml.kernel.org/r/20200708192934.191497962@linutronix.de --- arch/x86/entry/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c index e83b3f14897c..ea7b515e3bc2 100644 --- a/arch/x86/entry/common.c +++ b/arch/x86/entry/common.c @@ -46,7 +46,7 @@ #include /* Check that the stack and regs on entry from user mode are sane. */ -static void check_user_regs(struct pt_regs *regs) +static noinstr void check_user_regs(struct pt_regs *regs) { if (IS_ENABLED(CONFIG_DEBUG_ENTRY)) { /* -- cgit v1.2.3 From bd87e6f6610aa96fde01ee6653e162213f7ec836 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 8 Jul 2020 21:28:07 +0200 Subject: x86/entry/common: Make prepare_exit_to_usermode() static No users outside this file anymore. Signed-off-by: Thomas Gleixner Acked-by: Andy Lutomirski Link: https://lkml.kernel.org/r/20200708192934.301116609@linutronix.de --- arch/x86/entry/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c index ea7b515e3bc2..f09288431f28 100644 --- a/arch/x86/entry/common.c +++ b/arch/x86/entry/common.c @@ -294,7 +294,7 @@ static void __prepare_exit_to_usermode(struct pt_regs *regs) #endif } -__visible noinstr void prepare_exit_to_usermode(struct pt_regs *regs) +static noinstr void prepare_exit_to_usermode(struct pt_regs *regs) { instrumentation_begin(); __prepare_exit_to_usermode(regs); -- cgit v1.2.3 From 30c66fc30ee7a98c4f3adf5fb7e213b61884474f Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 3 Jul 2020 03:06:57 +0200 Subject: timer: Prevent base->clk from moving backward When a timer is enqueued with a negative delta (ie: expiry is below base->clk), it gets added to the wheel as expiring now (base->clk). Yet the value that gets stored in base->next_expiry, while calling trigger_dyntick_cpu(), is the initial timer->expires value. The resulting state becomes: base->next_expiry < base->clk On the next timer enqueue, forward_timer_base() may accidentally rewind base->clk. As a possible outcome, timers may expire way too early, the worst case being that the highest wheel levels get spuriously processed again. To prevent from that, make sure that base->next_expiry doesn't get below base->clk. Fixes: a683f390b93f ("timers: Forward the wheel clock whenever possible") Signed-off-by: Frederic Weisbecker Signed-off-by: Thomas Gleixner Reviewed-by: Anna-Maria Behnsen Tested-by: Juri Lelli Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200703010657.2302-1-frederic@kernel.org --- kernel/time/timer.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/kernel/time/timer.c b/kernel/time/timer.c index 398e6eadb861..9a838d38dbe6 100644 --- a/kernel/time/timer.c +++ b/kernel/time/timer.c @@ -584,7 +584,15 @@ trigger_dyntick_cpu(struct timer_base *base, struct timer_list *timer) * Set the next expiry time and kick the CPU so it can reevaluate the * wheel: */ - base->next_expiry = timer->expires; + if (time_before(timer->expires, base->clk)) { + /* + * Prevent from forward_timer_base() moving the base->clk + * backward + */ + base->next_expiry = base->clk; + } else { + base->next_expiry = timer->expires; + } wake_up_nohz_cpu(base->cpu); } @@ -896,10 +904,13 @@ static inline void forward_timer_base(struct timer_base *base) * If the next expiry value is > jiffies, then we fast forward to * jiffies otherwise we forward to the next expiry value. */ - if (time_after(base->next_expiry, jnow)) + if (time_after(base->next_expiry, jnow)) { base->clk = jnow; - else + } else { + if (WARN_ON_ONCE(time_before(base->next_expiry, base->clk))) + return; base->clk = base->next_expiry; + } #endif } -- cgit v1.2.3 From 6d1d41c075a1a54ba03370e268171fec20e06563 Mon Sep 17 00:00:00 2001 From: Chu Lin Date: Thu, 9 Jul 2020 04:06:12 +0000 Subject: hwmon: (adm1275) Make sure we are reading enough data for different chips Issue: When PEC is enabled, binding adm1272 to the adm1275 would fail due to PEC error. See below: adm1275: probe of xxxx failed with error -74 Diagnosis: Per the datasheet of adm1272, adm1278, adm1293 and amd1294, PMON_CONFIG (0xd4) is 16bits wide. On the other hand, PMON_CONFIG (0xd4) for adm1275 is 8bits wide. The driver should not assume everything is 8bits wide and read only 8bits from it. Solution: If it is adm1272, adm1278, adm1293 and adm1294, use i2c_read_word. Else, use i2c_read_byte Testing: Binding adm1272 to the driver. The change is only tested on adm1272. Signed-off-by: Chu Lin Link: https://lore.kernel.org/r/20200709040612.3977094-1-linchuyuan@google.com Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1275.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c index e25f541227da..19317575d1c6 100644 --- a/drivers/hwmon/pmbus/adm1275.c +++ b/drivers/hwmon/pmbus/adm1275.c @@ -465,6 +465,7 @@ MODULE_DEVICE_TABLE(i2c, adm1275_id); static int adm1275_probe(struct i2c_client *client, const struct i2c_device_id *id) { + s32 (*config_read_fn)(const struct i2c_client *client, u8 reg); u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; int config, device_config; int ret; @@ -510,11 +511,16 @@ static int adm1275_probe(struct i2c_client *client, "Device mismatch: Configured %s, detected %s\n", id->name, mid->name); - config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG); + if (mid->driver_data == adm1272 || mid->driver_data == adm1278 || + mid->driver_data == adm1293 || mid->driver_data == adm1294) + config_read_fn = i2c_smbus_read_word_data; + else + config_read_fn = i2c_smbus_read_byte_data; + config = config_read_fn(client, ADM1275_PMON_CONFIG); if (config < 0) return config; - device_config = i2c_smbus_read_byte_data(client, ADM1275_DEVICE_CONFIG); + device_config = config_read_fn(client, ADM1275_DEVICE_CONFIG); if (device_config < 0) return device_config; -- cgit v1.2.3 From 9ac8545199a1b711f5643f535b82981faa0b4bf1 Mon Sep 17 00:00:00 2001 From: Qian Cai Date: Fri, 3 Jul 2020 20:10:03 -0400 Subject: iommu: Fix use-after-free in iommu_release_device In pci_disable_sriov(), i.e., # echo 0 > /sys/class/net/enp11s0f1np1/device/sriov_numvfs iommu_release_device iommu_group_remove_device arm_smmu_domain_free kfree(smmu_domain) Later, iommu_release_device arm_smmu_release_device arm_smmu_detach_dev spin_lock_irqsave(&smmu_domain->devices_lock, would trigger an use-after-free. Fixed it by call arm_smmu_release_device() first before iommu_group_remove_device(). BUG: KASAN: use-after-free in __lock_acquire+0x3458/0x4440 __lock_acquire at kernel/locking/lockdep.c:4250 Read of size 8 at addr ffff0089df1a6f68 by task bash/3356 CPU: 5 PID: 3356 Comm: bash Not tainted 5.8.0-rc3-next-20200630 #2 Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.11 06/18/2019 Call trace: dump_backtrace+0x0/0x398 show_stack+0x14/0x20 dump_stack+0x140/0x1b8 print_address_description.isra.12+0x54/0x4a8 kasan_report+0x134/0x1b8 __asan_report_load8_noabort+0x2c/0x50 __lock_acquire+0x3458/0x4440 lock_acquire+0x204/0xf10 _raw_spin_lock_irqsave+0xf8/0x180 arm_smmu_detach_dev+0xd8/0x4a0 arm_smmu_detach_dev at drivers/iommu/arm-smmu-v3.c:2776 arm_smmu_release_device+0xb4/0x1c8 arm_smmu_disable_pasid at drivers/iommu/arm-smmu-v3.c:2754 (inlined by) arm_smmu_release_device at drivers/iommu/arm-smmu-v3.c:3000 iommu_release_device+0xc0/0x178 iommu_release_device at drivers/iommu/iommu.c:302 iommu_bus_notifier+0x118/0x160 notifier_call_chain+0xa4/0x128 __blocking_notifier_call_chain+0x70/0xa8 blocking_notifier_call_chain+0x14/0x20 device_del+0x618/0xa00 pci_remove_bus_device+0x108/0x2d8 pci_stop_and_remove_bus_device+0x1c/0x28 pci_iov_remove_virtfn+0x228/0x368 sriov_disable+0x8c/0x348 pci_disable_sriov+0x5c/0x70 mlx5_core_sriov_configure+0xd8/0x260 [mlx5_core] sriov_numvfs_store+0x240/0x318 dev_attr_store+0x38/0x68 sysfs_kf_write+0xdc/0x128 kernfs_fop_write+0x23c/0x448 __vfs_write+0x54/0xe8 vfs_write+0x124/0x3f0 ksys_write+0xe8/0x1b8 __arm64_sys_write+0x68/0x98 do_el0_svc+0x124/0x220 el0_sync_handler+0x260/0x408 el0_sync+0x140/0x180 Allocated by task 3356: save_stack+0x24/0x50 __kasan_kmalloc.isra.13+0xc4/0xe0 kasan_kmalloc+0xc/0x18 kmem_cache_alloc_trace+0x1ec/0x318 arm_smmu_domain_alloc+0x54/0x148 iommu_group_alloc_default_domain+0xc0/0x440 iommu_probe_device+0x1c0/0x308 iort_iommu_configure+0x434/0x518 acpi_dma_configure+0xf0/0x128 pci_dma_configure+0x114/0x160 really_probe+0x124/0x6d8 driver_probe_device+0xc4/0x180 __device_attach_driver+0x184/0x1e8 bus_for_each_drv+0x114/0x1a0 __device_attach+0x19c/0x2a8 device_attach+0x10/0x18 pci_bus_add_device+0x70/0xf8 pci_iov_add_virtfn+0x7b4/0xb40 sriov_enable+0x5c8/0xc30 pci_enable_sriov+0x64/0x80 mlx5_core_sriov_configure+0x58/0x260 [mlx5_core] sriov_numvfs_store+0x1c0/0x318 dev_attr_store+0x38/0x68 sysfs_kf_write+0xdc/0x128 kernfs_fop_write+0x23c/0x448 __vfs_write+0x54/0xe8 vfs_write+0x124/0x3f0 ksys_write+0xe8/0x1b8 __arm64_sys_write+0x68/0x98 do_el0_svc+0x124/0x220 el0_sync_handler+0x260/0x408 el0_sync+0x140/0x180 Freed by task 3356: save_stack+0x24/0x50 __kasan_slab_free+0x124/0x198 kasan_slab_free+0x10/0x18 slab_free_freelist_hook+0x110/0x298 kfree+0x128/0x668 arm_smmu_domain_free+0xf4/0x1a0 iommu_group_release+0xec/0x160 kobject_put+0xf4/0x238 kobject_del+0x110/0x190 kobject_put+0x1e4/0x238 iommu_group_remove_device+0x394/0x938 iommu_release_device+0x9c/0x178 iommu_release_device at drivers/iommu/iommu.c:300 iommu_bus_notifier+0x118/0x160 notifier_call_chain+0xa4/0x128 __blocking_notifier_call_chain+0x70/0xa8 blocking_notifier_call_chain+0x14/0x20 device_del+0x618/0xa00 pci_remove_bus_device+0x108/0x2d8 pci_stop_and_remove_bus_device+0x1c/0x28 pci_iov_remove_virtfn+0x228/0x368 sriov_disable+0x8c/0x348 pci_disable_sriov+0x5c/0x70 mlx5_core_sriov_configure+0xd8/0x260 [mlx5_core] sriov_numvfs_store+0x240/0x318 dev_attr_store+0x38/0x68 sysfs_kf_write+0xdc/0x128 kernfs_fop_write+0x23c/0x448 __vfs_write+0x54/0xe8 vfs_write+0x124/0x3f0 ksys_write+0xe8/0x1b8 __arm64_sys_write+0x68/0x98 do_el0_svc+0x124/0x220 el0_sync_handler+0x260/0x408 el0_sync+0x140/0x180 The buggy address belongs to the object at ffff0089df1a6e00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 360 bytes inside of 512-byte region [ffff0089df1a6e00, ffff0089df1a7000) The buggy address belongs to the page: page:ffffffe02257c680 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0089df1a1400 flags: 0x7ffff800000200(slab) raw: 007ffff800000200 ffffffe02246b8c8 ffffffe02257ff88 ffff000000320680 raw: ffff0089df1a1400 00000000002a000e 00000001ffffffff ffff0089df1a5001 page dumped because: kasan: bad access detected page->mem_cgroup:ffff0089df1a5001 Memory state around the buggy address: ffff0089df1a6e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff0089df1a6e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff0089df1a6f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff0089df1a6f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff0089df1a7000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: a6a4c7e2c5b8 ("iommu: Add probe_device() and release_device() call-backs") Signed-off-by: Qian Cai Link: https://lore.kernel.org/r/20200704001003.2303-1-cai@lca.pw Signed-off-by: Joerg Roedel --- drivers/iommu/iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index d43120eb1dc5..b6858adc4f17 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -295,10 +295,10 @@ void iommu_release_device(struct device *dev) return; iommu_device_unlink(dev->iommu->iommu_dev, dev); - iommu_group_remove_device(dev); ops->release_device(dev); + iommu_group_remove_device(dev); module_put(ops->owner); dev_iommu_free(dev); } -- cgit v1.2.3 From a082121b55bac125f7d09d78de00607ea75a6903 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Thu, 4 Jun 2020 14:39:04 -0600 Subject: iommu/arm-smmu: Mark qcom_smmu_client_of_match as possibly unused When CONFIG_OF=n of_match_device() gets pre-processed out of existence leaving qcom-smmu_client_of_match unused. Mark it as possibly unused to keep the compiler from warning in that case. Fixes: 0e764a01015d ("iommu/arm-smmu: Allow client devices to select direct mapping") Reported-by: kbuild test robot Signed-off-by: Jordan Crouse Acked-by: Will Deacon Link: https://lore.kernel.org/r/20200604203905.31964-1-jcrouse@codeaurora.org Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu-qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/arm-smmu-qcom.c b/drivers/iommu/arm-smmu-qcom.c index cf01d0215a39..be4318044f96 100644 --- a/drivers/iommu/arm-smmu-qcom.c +++ b/drivers/iommu/arm-smmu-qcom.c @@ -12,7 +12,7 @@ struct qcom_smmu { struct arm_smmu_device smmu; }; -static const struct of_device_id qcom_smmu_client_of_match[] = { +static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = { { .compatible = "qcom,adreno" }, { .compatible = "qcom,mdp4" }, { .compatible = "qcom,mdss" }, -- cgit v1.2.3 From 230ed397435e85b54f055c524fcb267ae2ce3bc4 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 6 Jul 2020 09:14:12 -0400 Subject: btrfs: fix double put of block group with nocow While debugging a patch that I wrote I was hitting use-after-free panics when accessing block groups on unmount. This turned out to be because in the nocow case if we bail out of doing the nocow for whatever reason we need to call btrfs_dec_nocow_writers() if we called the inc. This puts our block group, but a few error cases does if (nocow) { btrfs_dec_nocow_writers(); goto error; } unfortunately, error is error: if (nocow) btrfs_dec_nocow_writers(); so we get a double put on our block group. Fix this by dropping the error cases calling of btrfs_dec_nocow_writers(), as it's handled at the error label now. Fixes: 762bf09893b4 ("btrfs: improve error handling in run_delalloc_nocow") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/inode.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index cfa863d2d97c..11f81a148350 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1690,12 +1690,8 @@ out_check: ret = fallback_to_cow(inode, locked_page, cow_start, found_key.offset - 1, page_started, nr_written); - if (ret) { - if (nocow) - btrfs_dec_nocow_writers(fs_info, - disk_bytenr); + if (ret) goto error; - } cow_start = (u64)-1; } @@ -1711,9 +1707,6 @@ out_check: ram_bytes, BTRFS_COMPRESS_NONE, BTRFS_ORDERED_PREALLOC); if (IS_ERR(em)) { - if (nocow) - btrfs_dec_nocow_writers(fs_info, - disk_bytenr); ret = PTR_ERR(em); goto error; } -- cgit v1.2.3 From d77765911385b65fc82d74ab71b8983cddfe0b58 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 9 Jul 2020 18:22:06 +0200 Subject: btrfs: wire up iter_file_splice_write btrfs implements the iter_write op and thus can use the more efficient iov_iter based splice implementation. For now falling back to the less efficient default is pretty harmless, but I have a pending series that removes the default, and thus would cause btrfs to not support splice at all. Reported-by: Andy Lavr Tested-by: Andy Lavr Signed-off-by: Christoph Hellwig Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/file.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 2520605afc25..b0d2c976587e 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -3509,6 +3509,7 @@ const struct file_operations btrfs_file_operations = { .read_iter = generic_file_read_iter, .splice_read = generic_file_splice_read, .write_iter = btrfs_file_write_iter, + .splice_write = iter_file_splice_write, .mmap = btrfs_file_mmap, .open = btrfs_file_open, .release = btrfs_release_file, -- cgit v1.2.3 From 574ea5c80eb18edd0d93864985650efec63347c0 Mon Sep 17 00:00:00 2001 From: Puyou Lu Date: Thu, 2 Jul 2020 10:30:25 +0800 Subject: ASoC: wm8974: fix Boost Mixer Aux Switch Clear BIT6 of INPPGA means not muted (Switch On). Signed-off-by: Puyou Lu Acked-by: Charles Keepax Link: https://lore.kernel.org/r/1593657025-4903-1-git-send-email-puyou.lu@gmail.com Signed-off-by: Mark Brown --- sound/soc/codecs/wm8974.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c index 06ba36595ddd..764bf93fb58a 100644 --- a/sound/soc/codecs/wm8974.c +++ b/sound/soc/codecs/wm8974.c @@ -186,7 +186,7 @@ SOC_DAPM_SINGLE("PCM Playback Switch", WM8974_MONOMIX, 0, 1, 0), /* Boost mixer */ static const struct snd_kcontrol_new wm8974_boost_mixer[] = { -SOC_DAPM_SINGLE("Aux Switch", WM8974_INPPGA, 6, 1, 0), +SOC_DAPM_SINGLE("Aux Switch", WM8974_INPPGA, 6, 1, 1), }; /* Input PGA */ -- cgit v1.2.3 From 01283d56f0ea0040b64dc785542f3ad3fb8b3e68 Mon Sep 17 00:00:00 2001 From: Puyou Lu Date: Thu, 2 Jul 2020 10:30:56 +0800 Subject: ASoC: wm8974: remove unsupported clock mode In DSP_A mode, BIT7 of IFACE should bit 0 according to datasheet (ie. inverted frame clock is not support in this mode). Signed-off-by: Puyou Lu Acked-by: Charles Keepax Link: https://lore.kernel.org/r/1593657056-4989-1-git-send-email-puyou.lu@gmail.com Signed-off-by: Mark Brown --- sound/soc/codecs/wm8974.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c index 764bf93fb58a..7cfc89602fc3 100644 --- a/sound/soc/codecs/wm8974.c +++ b/sound/soc/codecs/wm8974.c @@ -474,6 +474,10 @@ static int wm8974_set_dai_fmt(struct snd_soc_dai *codec_dai, iface |= 0x0008; break; case SND_SOC_DAIFMT_DSP_A: + if ((fmt & SND_SOC_DAIFMT_INV_MASK) == SND_SOC_DAIFMT_IB_IF || + (fmt & SND_SOC_DAIFMT_INV_MASK) == SND_SOC_DAIFMT_NB_IF) { + return -EINVAL; + } iface |= 0x00018; break; default: -- cgit v1.2.3 From 12eb3ad0638c2a6af72de866e9d7837de16ee82f Mon Sep 17 00:00:00 2001 From: Shuming Fan Date: Thu, 9 Jul 2020 18:13:45 +0800 Subject: ASoC: rt286: fix unexpected interrupt happens The HV/VREF should not turn off if the headphone jack plug-in. This patch could solve the unexpected interrupt issue in some devices. Signed-off-by: Shuming Fan Tested-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200709101345.11449-1-shumingf@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt286.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c index 9593a9a27bf8..e8d14eefc41b 100644 --- a/sound/soc/codecs/rt286.c +++ b/sound/soc/codecs/rt286.c @@ -272,13 +272,13 @@ static int rt286_jack_detect(struct rt286_priv *rt286, bool *hp, bool *mic) regmap_read(rt286->regmap, RT286_GET_MIC1_SENSE, &buf); *mic = buf & 0x80000000; } - if (!*mic) { + + if (!*hp) { snd_soc_dapm_disable_pin(dapm, "HV"); snd_soc_dapm_disable_pin(dapm, "VREF"); - } - if (!*hp) snd_soc_dapm_disable_pin(dapm, "LDO1"); - snd_soc_dapm_sync(dapm); + snd_soc_dapm_sync(dapm); + } return 0; } -- cgit v1.2.3 From 8c080d3a974ad471d8324825851044284f1886c9 Mon Sep 17 00:00:00 2001 From: Vincent Chen Date: Tue, 23 Jun 2020 13:36:42 +0800 Subject: kgdb: enable arch to support XML packet. The XML packet could be supported by required architecture if the architecture defines CONFIG_HAVE_ARCH_KGDB_QXFER_PKT and implement its own kgdb_arch_handle_qxfer_pkt(). Except for the kgdb_arch_handle_qxfer_pkt(), the architecture also needs to record the feature supported by gdb stub into the kgdb_arch_gdb_stub_feature, and these features will be reported to host gdb when gdb stub receives the qSupported packet. Signed-off-by: Vincent Chen Acked-by: Daniel Thompson Signed-off-by: Palmer Dabbelt --- include/linux/kgdb.h | 11 +++++++++++ kernel/debug/gdbstub.c | 13 +++++++++++++ lib/Kconfig.kgdb | 5 +++++ 3 files changed, 29 insertions(+) diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h index 529116b0cabe..0e4e3a80d58c 100644 --- a/include/linux/kgdb.h +++ b/include/linux/kgdb.h @@ -176,6 +176,17 @@ kgdb_arch_handle_exception(int vector, int signo, int err_code, char *remcom_out_buffer, struct pt_regs *regs); +/** + * kgdb_arch_handle_qxfer_pkt - Handle architecture specific GDB XML + * packets. + * @remcom_in_buffer: The buffer of the packet we have read. + * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into. + */ + +extern void +kgdb_arch_handle_qxfer_pkt(char *remcom_in_buffer, + char *remcom_out_buffer); + /** * kgdb_call_nmi_hook - Call kgdb_nmicallback() on the current CPU * @ignored: This parameter is only here to match the prototype. diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c index 61774aec46b4..a790026e42d0 100644 --- a/kernel/debug/gdbstub.c +++ b/kernel/debug/gdbstub.c @@ -792,6 +792,19 @@ static void gdb_cmd_query(struct kgdb_state *ks) } break; #endif +#ifdef CONFIG_HAVE_ARCH_KGDB_QXFER_PKT + case 'S': + if (!strncmp(remcom_in_buffer, "qSupported:", 11)) + strcpy(remcom_out_buffer, kgdb_arch_gdb_stub_feature); + break; + case 'X': + if (!strncmp(remcom_in_buffer, "qXfer:", 6)) + kgdb_arch_handle_qxfer_pkt(remcom_in_buffer, + remcom_out_buffer); + break; +#endif + default: + break; } } diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb index ffa7a76de086..256f2486f9bd 100644 --- a/lib/Kconfig.kgdb +++ b/lib/Kconfig.kgdb @@ -3,6 +3,11 @@ config HAVE_ARCH_KGDB bool +# set if architecture has the its kgdb_arch_handle_qxfer_pkt +# function to enable gdb stub to address XML packet sent from GDB. +config HAVE_ARCH_KGDB_QXFER_PKT + bool + menuconfig KGDB bool "KGDB: kernel debugger" depends on HAVE_ARCH_KGDB -- cgit v1.2.3 From fc0c769ffd926312848912a7c2296e1c503898c3 Mon Sep 17 00:00:00 2001 From: Vincent Chen Date: Tue, 23 Jun 2020 13:36:59 +0800 Subject: riscv: enable the Kconfig prompt of STRICT_KERNEL_RWX Due to lack of hardware breakpoint support, the kernel option CONFIG_STRICT_KERNEL_RWX should be disabled when using KGDB. However, CONFIG_STRICT_KERNEL_RWX is always enabled now. Therefore, select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT to enable CONFIG_STRICT_KERNEL_RWX by default, and then select ARCH_OPTIONAL_KERNEL_RWX to enable the Kconfig prompt of CONFIG_STRICT_KERNEL_RWX so that users can turn it off. Signed-off-by: Vincent Chen Signed-off-by: Palmer Dabbelt --- arch/riscv/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 128192e14ff2..3230c1d48562 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -23,6 +23,8 @@ config RISCV select ARCH_HAS_SET_DIRECT_MAP select ARCH_HAS_SET_MEMORY select ARCH_HAS_STRICT_KERNEL_RWX if MMU + select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX + select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU select ARCH_WANT_FRAME_POINTERS select ARCH_WANT_HUGE_PMD_SHARE if 64BIT -- cgit v1.2.3 From f7fc752815f8e2337548497b3afb4aef791db4ef Mon Sep 17 00:00:00 2001 From: Vincent Chen Date: Tue, 23 Jun 2020 13:37:10 +0800 Subject: riscv: Fix "no previous prototype" compile warning in kgdb.c file Some functions are only used in the kgdb.c file. Add static properities to these functions to avoid "no previous prototype" compile warnings Signed-off-by: Vincent Chen Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/kgdb.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/riscv/kernel/kgdb.c b/arch/riscv/kernel/kgdb.c index c3275f42d1ac..963ed7edcff2 100644 --- a/arch/riscv/kernel/kgdb.c +++ b/arch/riscv/kernel/kgdb.c @@ -44,18 +44,18 @@ DECLARE_INSN(c_beqz, MATCH_C_BEQZ, MASK_C_BEQZ) DECLARE_INSN(c_bnez, MATCH_C_BNEZ, MASK_C_BNEZ) DECLARE_INSN(sret, MATCH_SRET, MASK_SRET) -int decode_register_index(unsigned long opcode, int offset) +static int decode_register_index(unsigned long opcode, int offset) { return (opcode >> offset) & 0x1F; } -int decode_register_index_short(unsigned long opcode, int offset) +static int decode_register_index_short(unsigned long opcode, int offset) { return ((opcode >> offset) & 0x7) + 8; } /* Calculate the new address for after a step */ -int get_step_address(struct pt_regs *regs, unsigned long *next_addr) +static int get_step_address(struct pt_regs *regs, unsigned long *next_addr) { unsigned long pc = regs->epc; unsigned long *regs_ptr = (unsigned long *)regs; @@ -136,7 +136,7 @@ int get_step_address(struct pt_regs *regs, unsigned long *next_addr) return 0; } -int do_single_step(struct pt_regs *regs) +static int do_single_step(struct pt_regs *regs) { /* Determine where the target instruction will send us to */ unsigned long addr = 0; @@ -320,7 +320,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, return err; } -int kgdb_riscv_kgdbbreak(unsigned long addr) +static int kgdb_riscv_kgdbbreak(unsigned long addr) { if (stepped_address == addr) return KGDB_SW_SINGLE_STEP; -- cgit v1.2.3 From def0aa218e6d42231540329e6f5741fdec9e7da4 Mon Sep 17 00:00:00 2001 From: Vincent Chen Date: Tue, 23 Jun 2020 13:37:25 +0800 Subject: kgdb: Move the extern declaration kgdb_has_hit_break() to generic kgdb.h Currently, only riscv kgdb.c uses the kgdb_has_hit_break() to identify the kgdb breakpoint. It causes other architectures will encounter the "no previous prototype" warnings if the compile option has W=1. Moving the declaration of extern kgdb_has_hit_break() from risc-v kgdb.h to generic kgdb.h to avoid generating these warnings. Signed-off-by: Vincent Chen Acked-by: Daniel Thompson Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/kgdb.h | 1 - include/linux/kgdb.h | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/include/asm/kgdb.h b/arch/riscv/include/asm/kgdb.h index 8177a457caff..f45889bbb965 100644 --- a/arch/riscv/include/asm/kgdb.h +++ b/arch/riscv/include/asm/kgdb.h @@ -19,7 +19,6 @@ #ifndef __ASSEMBLY__ -extern int kgdb_has_hit_break(unsigned long addr); extern unsigned long kgdb_compiled_break; static inline void arch_kgdb_breakpoint(void) diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h index 0e4e3a80d58c..477b8b7c908f 100644 --- a/include/linux/kgdb.h +++ b/include/linux/kgdb.h @@ -325,6 +325,7 @@ extern int kgdb_hex2mem(char *buf, char *mem, int count); extern int kgdb_isremovedbreak(unsigned long addr); extern void kgdb_schedule_breakpoint(void); +extern int kgdb_has_hit_break(unsigned long addr); extern int kgdb_handle_exception(int ex_vector, int signo, int err_code, -- cgit v1.2.3 From 70ee5731a40b1f07f151e52c3c4ed27d70d4f9fe Mon Sep 17 00:00:00 2001 From: Vincent Chen Date: Tue, 23 Jun 2020 13:37:35 +0800 Subject: riscv: Avoid kgdb.h including gdb_xml.h to solve unused-const-variable warning The constant arrays in gdb_xml.h are only used in arch/riscv/kernel/kgdb.c, but other c files may include the gdb_xml.h indirectly via including the kgdb.h. Hence, It will cause many unused-const-variable warnings. This patch makes the kgdb.h not to include the gdb_xml.h to solve this problem. Signed-off-by: Vincent Chen Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/gdb_xml.h | 3 +-- arch/riscv/include/asm/kgdb.h | 4 +++- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/riscv/include/asm/gdb_xml.h b/arch/riscv/include/asm/gdb_xml.h index 041b45f5b997..09342111f227 100644 --- a/arch/riscv/include/asm/gdb_xml.h +++ b/arch/riscv/include/asm/gdb_xml.h @@ -3,8 +3,7 @@ #ifndef __ASM_GDB_XML_H_ #define __ASM_GDB_XML_H_ -#define kgdb_arch_gdb_stub_feature riscv_gdb_stub_feature -static const char riscv_gdb_stub_feature[64] = +const char riscv_gdb_stub_feature[64] = "PacketSize=800;qXfer:features:read+;"; static const char gdb_xfer_read_target[31] = "qXfer:features:read:target.xml:"; diff --git a/arch/riscv/include/asm/kgdb.h b/arch/riscv/include/asm/kgdb.h index f45889bbb965..46677daf708b 100644 --- a/arch/riscv/include/asm/kgdb.h +++ b/arch/riscv/include/asm/kgdb.h @@ -105,7 +105,9 @@ static inline void arch_kgdb_breakpoint(void) #define DBG_REG_BADADDR_OFF 34 #define DBG_REG_CAUSE_OFF 35 -#include +extern const char riscv_gdb_stub_feature[64]; + +#define kgdb_arch_gdb_stub_feature riscv_gdb_stub_feature #endif #endif -- cgit v1.2.3 From 211f08347355cba1f769bbf3355816a12b3ddd55 Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Wed, 8 Jul 2020 06:12:43 -0700 Subject: USB: c67x00: fix use after free in c67x00_giveback_urb clang static analysis flags this error c67x00-sched.c:489:55: warning: Use of memory after it is freed [unix.Malloc] usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); ^~~~~~~~~~~~ Problem happens in this block of code c67x00_release_urb(c67x00, urb); usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb); spin_unlock(&c67x00->lock); usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); In the call to c67x00_release_urb has this freeing of urbp urbp = urb->hcpriv; urb->hcpriv = NULL; list_del(&urbp->hep_node); kfree(urbp); And so urbp is freed before usb_hcd_giveback_urb uses it as its 3rd parameter. Since all is required is the status, pass the status directly as is done in c64x00_urb_dequeue Fixes: e9b29ffc519b ("USB: add Cypress c67x00 OTG controller HCD driver") Signed-off-by: Tom Rix Cc: stable Link: https://lore.kernel.org/r/20200708131243.24336-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/c67x00/c67x00-sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c index 633c52de3bb3..9865750bc31e 100644 --- a/drivers/usb/c67x00/c67x00-sched.c +++ b/drivers/usb/c67x00/c67x00-sched.c @@ -486,7 +486,7 @@ c67x00_giveback_urb(struct c67x00_hcd *c67x00, struct urb *urb, int status) c67x00_release_urb(c67x00, urb); usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb); spin_unlock(&c67x00->lock); - usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); + usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, status); spin_lock(&c67x00->lock); } -- cgit v1.2.3 From 6348dd291e3653534a9e28e6917569bc9967b35b Mon Sep 17 00:00:00 2001 From: Charan Teja Kalla Date: Fri, 19 Jun 2020 17:27:19 +0530 Subject: dmabuf: use spinlock to access dmabuf->name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There exists a sleep-while-atomic bug while accessing the dmabuf->name under mutex in the dmabuffs_dname(). This is caused from the SELinux permissions checks on a process where it tries to validate the inherited files from fork() by traversing them through iterate_fd() (which traverse files under spin_lock) and call match_file(security/selinux/hooks.c) where the permission checks happen. This audit information is logged using dump_common_audit_data() where it calls d_path() to get the file path name. If the file check happen on the dmabuf's fd, then it ends up in ->dmabuffs_dname() and use mutex to access dmabuf->name. The flow will be like below: flush_unauthorized_files() iterate_fd() spin_lock() --> Start of the atomic section. match_file() file_has_perm() avc_has_perm() avc_audit() slow_avc_audit() common_lsm_audit() dump_common_audit_data() audit_log_d_path() d_path() dmabuffs_dname() mutex_lock()--> Sleep while atomic. Call trace captured (on 4.19 kernels) is below: ___might_sleep+0x204/0x208 __might_sleep+0x50/0x88 __mutex_lock_common+0x5c/0x1068 __mutex_lock_common+0x5c/0x1068 mutex_lock_nested+0x40/0x50 dmabuffs_dname+0xa0/0x170 d_path+0x84/0x290 audit_log_d_path+0x74/0x130 common_lsm_audit+0x334/0x6e8 slow_avc_audit+0xb8/0xf8 avc_has_perm+0x154/0x218 file_has_perm+0x70/0x180 match_file+0x60/0x78 iterate_fd+0x128/0x168 selinux_bprm_committing_creds+0x178/0x248 security_bprm_committing_creds+0x30/0x48 install_exec_creds+0x1c/0x68 load_elf_binary+0x3a4/0x14e0 search_binary_handler+0xb0/0x1e0 So, use spinlock to access dmabuf->name to avoid sleep-while-atomic. Cc: [5.3+] Signed-off-by: Charan Teja Kalla Reviewed-by: Michael J. Ruhl Acked-by: Christian König [sumits: added comment to spinlock_t definition to avoid warning] Signed-off-by: Sumit Semwal Link: https://patchwork.freedesktop.org/patch/msgid/a83e7f0d-4e54-9848-4b58-e1acdbe06735@codeaurora.org --- drivers/dma-buf/dma-buf.c | 11 +++++++---- include/linux/dma-buf.h | 1 + 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c index 412629601ad3..1ca609f66fdf 100644 --- a/drivers/dma-buf/dma-buf.c +++ b/drivers/dma-buf/dma-buf.c @@ -45,10 +45,10 @@ static char *dmabuffs_dname(struct dentry *dentry, char *buffer, int buflen) size_t ret = 0; dmabuf = dentry->d_fsdata; - dma_resv_lock(dmabuf->resv, NULL); + spin_lock(&dmabuf->name_lock); if (dmabuf->name) ret = strlcpy(name, dmabuf->name, DMA_BUF_NAME_LEN); - dma_resv_unlock(dmabuf->resv); + spin_unlock(&dmabuf->name_lock); return dynamic_dname(dentry, buffer, buflen, "/%s:%s", dentry->d_name.name, ret > 0 ? name : ""); @@ -338,8 +338,10 @@ static long dma_buf_set_name(struct dma_buf *dmabuf, const char __user *buf) kfree(name); goto out_unlock; } + spin_lock(&dmabuf->name_lock); kfree(dmabuf->name); dmabuf->name = name; + spin_unlock(&dmabuf->name_lock); out_unlock: dma_resv_unlock(dmabuf->resv); @@ -402,10 +404,10 @@ static void dma_buf_show_fdinfo(struct seq_file *m, struct file *file) /* Don't count the temporary reference taken inside procfs seq_show */ seq_printf(m, "count:\t%ld\n", file_count(dmabuf->file) - 1); seq_printf(m, "exp_name:\t%s\n", dmabuf->exp_name); - dma_resv_lock(dmabuf->resv, NULL); + spin_lock(&dmabuf->name_lock); if (dmabuf->name) seq_printf(m, "name:\t%s\n", dmabuf->name); - dma_resv_unlock(dmabuf->resv); + spin_unlock(&dmabuf->name_lock); } static const struct file_operations dma_buf_fops = { @@ -542,6 +544,7 @@ struct dma_buf *dma_buf_export(const struct dma_buf_export_info *exp_info) dmabuf->size = exp_info->size; dmabuf->exp_name = exp_info->exp_name; dmabuf->owner = exp_info->owner; + spin_lock_init(&dmabuf->name_lock); init_waitqueue_head(&dmabuf->poll); dmabuf->cb_excl.poll = dmabuf->cb_shared.poll = &dmabuf->poll; dmabuf->cb_excl.active = dmabuf->cb_shared.active = 0; diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index ab0c156abee6..a2ca294eaebe 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -311,6 +311,7 @@ struct dma_buf { void *vmap_ptr; const char *exp_name; const char *name; + spinlock_t name_lock; /* spinlock to protect name access */ struct module *owner; struct list_head list_node; void *priv; -- cgit v1.2.3 From f794db6841e5480208f0c3a3ac1df445a96b079e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 9 Jul 2020 14:08:51 +0200 Subject: virt: vbox: Fix VBGL_IOCTL_VMMDEV_REQUEST_BIG and _LOG req numbers to match upstream Until this commit the mainline kernel version (this version) of the vboxguest module contained a bug where it defined VBGL_IOCTL_VMMDEV_REQUEST_BIG and VBGL_IOCTL_LOG using _IOC(_IOC_READ | _IOC_WRITE, 'V', ...) instead of _IO(V, ...) as the out of tree VirtualBox upstream version does. Since the VirtualBox userspace bits are always built against VirtualBox upstream's headers, this means that so far the mainline kernel version of the vboxguest module has been failing these 2 ioctls with -ENOTTY. I guess that VBGL_IOCTL_VMMDEV_REQUEST_BIG is never used causing us to not hit that one and sofar the vboxguest driver has failed to actually log any log messages passed it through VBGL_IOCTL_LOG. This commit changes the VBGL_IOCTL_VMMDEV_REQUEST_BIG and VBGL_IOCTL_LOG defines to match the out of tree VirtualBox upstream vboxguest version, while keeping compatibility with the old wrong request defines so as to not break the kernel ABI in case someone has been using the old request defines. Fixes: f6ddd094f579 ("virt: Add vboxguest driver for Virtual Box Guest integration UAPI") Cc: stable@vger.kernel.org Acked-by: Arnd Bergmann Reviewed-by: Arnd Bergmann Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200709120858.63928-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/virt/vboxguest/vboxguest_core.c | 4 +++- drivers/virt/vboxguest/vboxguest_core.h | 15 +++++++++++++++ drivers/virt/vboxguest/vboxguest_linux.c | 3 ++- include/uapi/linux/vboxguest.h | 4 ++-- 4 files changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/virt/vboxguest/vboxguest_core.c b/drivers/virt/vboxguest/vboxguest_core.c index b690a8a4bf9e..8fab04e76c14 100644 --- a/drivers/virt/vboxguest/vboxguest_core.c +++ b/drivers/virt/vboxguest/vboxguest_core.c @@ -1520,7 +1520,8 @@ int vbg_core_ioctl(struct vbg_session *session, unsigned int req, void *data) /* For VMMDEV_REQUEST hdr->type != VBG_IOCTL_HDR_TYPE_DEFAULT */ if (req_no_size == VBG_IOCTL_VMMDEV_REQUEST(0) || - req == VBG_IOCTL_VMMDEV_REQUEST_BIG) + req == VBG_IOCTL_VMMDEV_REQUEST_BIG || + req == VBG_IOCTL_VMMDEV_REQUEST_BIG_ALT) return vbg_ioctl_vmmrequest(gdev, session, data); if (hdr->type != VBG_IOCTL_HDR_TYPE_DEFAULT) @@ -1558,6 +1559,7 @@ int vbg_core_ioctl(struct vbg_session *session, unsigned int req, void *data) case VBG_IOCTL_HGCM_CALL(0): return vbg_ioctl_hgcm_call(gdev, session, f32bit, data); case VBG_IOCTL_LOG(0): + case VBG_IOCTL_LOG_ALT(0): return vbg_ioctl_log(data); } diff --git a/drivers/virt/vboxguest/vboxguest_core.h b/drivers/virt/vboxguest/vboxguest_core.h index 4188c12b839f..77c3a9c8255d 100644 --- a/drivers/virt/vboxguest/vboxguest_core.h +++ b/drivers/virt/vboxguest/vboxguest_core.h @@ -15,6 +15,21 @@ #include #include "vmmdev.h" +/* + * The mainline kernel version (this version) of the vboxguest module + * contained a bug where it defined VBGL_IOCTL_VMMDEV_REQUEST_BIG and + * VBGL_IOCTL_LOG using _IOC(_IOC_READ | _IOC_WRITE, 'V', ...) instead + * of _IO(V, ...) as the out of tree VirtualBox upstream version does. + * + * These _ALT definitions keep compatibility with the wrong defines the + * mainline kernel version used for a while. + * Note the VirtualBox userspace bits have always been built against + * VirtualBox upstream's headers, so this is likely not necessary. But + * we must never break our ABI so we keep these around to be 100% sure. + */ +#define VBG_IOCTL_VMMDEV_REQUEST_BIG_ALT _IOC(_IOC_READ | _IOC_WRITE, 'V', 3, 0) +#define VBG_IOCTL_LOG_ALT(s) _IOC(_IOC_READ | _IOC_WRITE, 'V', 9, s) + struct vbg_session; /** VBox guest memory balloon. */ diff --git a/drivers/virt/vboxguest/vboxguest_linux.c b/drivers/virt/vboxguest/vboxguest_linux.c index 6e8c0f1c1056..32c2c52f7e84 100644 --- a/drivers/virt/vboxguest/vboxguest_linux.c +++ b/drivers/virt/vboxguest/vboxguest_linux.c @@ -131,7 +131,8 @@ static long vbg_misc_device_ioctl(struct file *filp, unsigned int req, * the need for a bounce-buffer and another copy later on. */ is_vmmdev_req = (req & ~IOCSIZE_MASK) == VBG_IOCTL_VMMDEV_REQUEST(0) || - req == VBG_IOCTL_VMMDEV_REQUEST_BIG; + req == VBG_IOCTL_VMMDEV_REQUEST_BIG || + req == VBG_IOCTL_VMMDEV_REQUEST_BIG_ALT; if (is_vmmdev_req) buf = vbg_req_alloc(size, VBG_IOCTL_HDR_TYPE_DEFAULT, diff --git a/include/uapi/linux/vboxguest.h b/include/uapi/linux/vboxguest.h index 9cec58a6a5ea..f79d7abe27db 100644 --- a/include/uapi/linux/vboxguest.h +++ b/include/uapi/linux/vboxguest.h @@ -103,7 +103,7 @@ VMMDEV_ASSERT_SIZE(vbg_ioctl_driver_version_info, 24 + 20); /* IOCTL to perform a VMM Device request larger then 1KB. */ -#define VBG_IOCTL_VMMDEV_REQUEST_BIG _IOC(_IOC_READ | _IOC_WRITE, 'V', 3, 0) +#define VBG_IOCTL_VMMDEV_REQUEST_BIG _IO('V', 3) /** VBG_IOCTL_HGCM_CONNECT data structure. */ @@ -198,7 +198,7 @@ struct vbg_ioctl_log { } u; }; -#define VBG_IOCTL_LOG(s) _IOC(_IOC_READ | _IOC_WRITE, 'V', 9, s) +#define VBG_IOCTL_LOG(s) _IO('V', 9) /** VBG_IOCTL_WAIT_FOR_EVENTS data structure. */ -- cgit v1.2.3 From 59d1d2e8e1e7c50d2657d5e4812b53f71f507968 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 9 Jul 2020 14:08:52 +0200 Subject: virt: vbox: Fix guest capabilities mask check Check the passed in capabilities against VMMDEV_GUEST_CAPABILITIES_MASK instead of against VMMDEV_EVENT_VALID_EVENT_MASK. This tightens the allowed mask from 0x7ff to 0x7. Fixes: 0ba002bc4393 ("virt: Add vboxguest driver for Virtual Box Guest integration") Cc: stable@vger.kernel.org Acked-by: Arnd Bergmann Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200709120858.63928-3-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/virt/vboxguest/vboxguest_core.c | 2 +- drivers/virt/vboxguest/vmmdev.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/virt/vboxguest/vboxguest_core.c b/drivers/virt/vboxguest/vboxguest_core.c index 8fab04e76c14..18ebd7a6af98 100644 --- a/drivers/virt/vboxguest/vboxguest_core.c +++ b/drivers/virt/vboxguest/vboxguest_core.c @@ -1444,7 +1444,7 @@ static int vbg_ioctl_change_guest_capabilities(struct vbg_dev *gdev, or_mask = caps->u.in.or_mask; not_mask = caps->u.in.not_mask; - if ((or_mask | not_mask) & ~VMMDEV_EVENT_VALID_EVENT_MASK) + if ((or_mask | not_mask) & ~VMMDEV_GUEST_CAPABILITIES_MASK) return -EINVAL; ret = vbg_set_session_capabilities(gdev, session, or_mask, not_mask, diff --git a/drivers/virt/vboxguest/vmmdev.h b/drivers/virt/vboxguest/vmmdev.h index 6337b8d75d96..21f408120e3f 100644 --- a/drivers/virt/vboxguest/vmmdev.h +++ b/drivers/virt/vboxguest/vmmdev.h @@ -206,6 +206,8 @@ VMMDEV_ASSERT_SIZE(vmmdev_mask, 24 + 8); * not. */ #define VMMDEV_GUEST_SUPPORTS_GRAPHICS BIT(2) +/* The mask of valid capabilities, for sanity checking. */ +#define VMMDEV_GUEST_CAPABILITIES_MASK 0x00000007U /** struct vmmdev_hypervisorinfo - Hypervisor info structure. */ struct vmmdev_hypervisorinfo { -- cgit v1.2.3 From ef75e14a6c935eec82abac07ab68e388514e39bc Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 9 Jul 2020 13:29:36 +0300 Subject: staging: comedi: verify array index is correct before using it This code reads from the array before verifying that "trig" is a valid index. If the index is wildly out of bounds then reading from an invalid address could lead to an Oops. Fixes: a8c66b684efa ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Signed-off-by: Dan Carpenter Reviewed-by: Ian Abbott Link: https://lore.kernel.org/r/20200709102936.GA20875@mwanda Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/addi_apci_1500.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/staging/comedi/drivers/addi_apci_1500.c b/drivers/staging/comedi/drivers/addi_apci_1500.c index 45ad4ba92f94..689acd69a1b9 100644 --- a/drivers/staging/comedi/drivers/addi_apci_1500.c +++ b/drivers/staging/comedi/drivers/addi_apci_1500.c @@ -456,9 +456,9 @@ static int apci1500_di_cfg_trig(struct comedi_device *dev, unsigned int lo_mask = data[5] << shift; unsigned int chan_mask = hi_mask | lo_mask; unsigned int old_mask = (1 << shift) - 1; - unsigned int pm = devpriv->pm[trig] & old_mask; - unsigned int pt = devpriv->pt[trig] & old_mask; - unsigned int pp = devpriv->pp[trig] & old_mask; + unsigned int pm; + unsigned int pt; + unsigned int pp; if (trig > 1) { dev_dbg(dev->class_dev, @@ -471,6 +471,10 @@ static int apci1500_di_cfg_trig(struct comedi_device *dev, return -EINVAL; } + pm = devpriv->pm[trig] & old_mask; + pt = devpriv->pt[trig] & old_mask; + pp = devpriv->pp[trig] & old_mask; + switch (data[2]) { case COMEDI_DIGITAL_TRIG_DISABLE: /* clear trigger configuration */ -- cgit v1.2.3 From ba8c423488974f02b538e9dc1730f0334f9b85aa Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 10 Jul 2020 14:36:10 +0300 Subject: xen/xenbus: Fix a double free in xenbus_map_ring_pv() When there is an error the caller frees "info->node" so the free here will result in a double free. We should just delete first kfree(). Fixes: 3848e4e0a32a ("xen/xenbus: avoid large structs and arrays on the stack") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20200710113610.GA92345@mwanda Reviewed-by: Juergen Gross Signed-off-by: Boris Ostrovsky --- drivers/xen/xenbus/xenbus_client.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c index 4f168b46fbca..786fbb7d8be0 100644 --- a/drivers/xen/xenbus/xenbus_client.c +++ b/drivers/xen/xenbus/xenbus_client.c @@ -693,10 +693,8 @@ static int xenbus_map_ring_pv(struct xenbus_device *dev, bool leaked; area = alloc_vm_area(XEN_PAGE_SIZE * nr_grefs, info->ptes); - if (!area) { - kfree(node); + if (!area) return -ENOMEM; - } for (i = 0; i < nr_grefs; i++) info->phys_addrs[i] = -- cgit v1.2.3 From d8edf8eb5f6e921fe6389f96d2cd05862730a6ff Mon Sep 17 00:00:00 2001 From: Chuhong Yuan Date: Thu, 9 Jul 2020 21:56:08 +0800 Subject: serial: mxs-auart: add missed iounmap() in probe failure and remove This driver calls ioremap() in probe, but it misses calling iounmap() in probe's error handler and remove. Add the missed calls to fix it. Fixes: 47d37d6f94cc ("serial: Add auart driver for i.MX23/28") Signed-off-by: Chuhong Yuan Cc: stable Link: https://lore.kernel.org/r/20200709135608.68290-1-hslester96@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mxs-auart.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index b4f835e7de23..b784323a6a7b 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1698,21 +1698,21 @@ static int mxs_auart_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { ret = irq; - goto out_disable_clks; + goto out_iounmap; } s->port.irq = irq; ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0, dev_name(&pdev->dev), s); if (ret) - goto out_disable_clks; + goto out_iounmap; platform_set_drvdata(pdev, s); ret = mxs_auart_init_gpios(s, &pdev->dev); if (ret) { dev_err(&pdev->dev, "Failed to initialize GPIOs.\n"); - goto out_disable_clks; + goto out_iounmap; } /* @@ -1720,7 +1720,7 @@ static int mxs_auart_probe(struct platform_device *pdev) */ ret = mxs_auart_request_gpio_irq(s); if (ret) - goto out_disable_clks; + goto out_iounmap; auart_port[s->port.line] = s; @@ -1746,6 +1746,9 @@ out_free_qpio_irq: mxs_auart_free_gpio_irq(s); auart_port[pdev->id] = NULL; +out_iounmap: + iounmap(s->port.membase); + out_disable_clks: if (is_asm9260_auart(s)) { clk_disable_unprepare(s->clk); @@ -1761,6 +1764,7 @@ static int mxs_auart_remove(struct platform_device *pdev) uart_remove_one_port(&auart_driver, &s->port); auart_port[pdev->id] = NULL; mxs_auart_free_gpio_irq(s); + iounmap(s->port.membase); if (is_asm9260_auart(s)) { clk_disable_unprepare(s->clk); clk_disable_unprepare(s->clk_ahb); -- cgit v1.2.3 From f743061a85f5e9989df22ccbf07c80c98fc90e08 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 7 Jul 2020 00:49:03 +0300 Subject: serial: core: Initialise spin lock before use in uart_configure_port() The comment near to uart_port_spin_lock_init() says: Ensure that the serial console lock is initialised early. If this port is a console, then the spinlock is already initialised. and there is nothing about enabled or disabled consoles. The commit a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") made a change, which follows the comment, and also to prevent reinitialisation of the lock in use, when user detaches and attaches back the same console device. But this change discovers another issue, that uart_add_one_port() tries to access a spin lock that now may be uninitialised. This happens when a driver expects the serial core to register a console on its behalf. In this case we must initialise a spin lock before use. Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Reported-by: Marc Zyngier Reported-by: Lad Prabhakar Reported-by: Guenter Roeck Reported-by: Anatoly Pugachev Acked-by: Marc Zyngier Tested-by: Tony Lindgren Cc: Geert Uytterhoeven Signed-off-by: Andy Shevchenko Tested-by: Lad Prabhakar Link: https://lore.kernel.org/r/20200706214903.56148-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index abb102e71b14..5f3daabdc916 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1914,6 +1914,12 @@ static inline bool uart_console_enabled(struct uart_port *port) return uart_console(port) && (port->cons->flags & CON_ENABLED); } +static void __uart_port_spin_lock_init(struct uart_port *port) +{ + spin_lock_init(&port->lock); + lockdep_set_class(&port->lock, &port_lock_key); +} + /* * Ensure that the serial console lock is initialised early. * If this port is a console, then the spinlock is already initialised. @@ -1923,8 +1929,7 @@ static inline void uart_port_spin_lock_init(struct uart_port *port) if (uart_console(port)) return; - spin_lock_init(&port->lock); - lockdep_set_class(&port->lock, &port_lock_key); + __uart_port_spin_lock_init(port); } #if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL) @@ -2370,6 +2375,13 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state, /* Power up port for set_mctrl() */ uart_change_pm(state, UART_PM_STATE_ON); + /* + * If this driver supports console, and it hasn't been + * successfully registered yet, initialise spin lock for it. + */ + if (port->cons && !(port->cons->flags & CON_ENABLED)) + __uart_port_spin_lock_init(port); + /* * Ensure that the modem control lines are de-activated. * keep the DTR setting that is set in uart_set_options() -- cgit v1.2.3 From 203c1f615052921901b7a8fbe2005d8ea6add076 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Mon, 6 Jul 2020 19:13:36 +0300 Subject: intel_th: pci: Add Jasper Lake CPU support This adds support for the Trace Hub in Jasper Lake CPU. Signed-off-by: Alexander Shishkin Reviewed-by: Andy Shevchenko Cc: stable@vger.kernel.org # v4.14+ Link: https://lore.kernel.org/r/20200706161339.55468-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/intel_th/pci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hwtracing/intel_th/pci.c b/drivers/hwtracing/intel_th/pci.c index 7ccac74553a6..f1dc1eef9ba2 100644 --- a/drivers/hwtracing/intel_th/pci.c +++ b/drivers/hwtracing/intel_th/pci.c @@ -238,6 +238,11 @@ static const struct pci_device_id intel_th_pci_id_table[] = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4da6), .driver_data = (kernel_ulong_t)&intel_th_2x, }, + { + /* Jasper Lake CPU */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4e29), + .driver_data = (kernel_ulong_t)&intel_th_2x, + }, { /* Elkhart Lake CPU */ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4529), -- cgit v1.2.3 From 6227585dc7b6a5405fc08dc322f98cb95e2f0eb4 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Mon, 6 Jul 2020 19:13:37 +0300 Subject: intel_th: pci: Add Tiger Lake PCH-H support This adds support for the Trace Hub in Tiger Lake PCH-H. Signed-off-by: Alexander Shishkin Reviewed-by: Andy Shevchenko Cc: stable@vger.kernel.org # v4.14+ Link: https://lore.kernel.org/r/20200706161339.55468-3-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/intel_th/pci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hwtracing/intel_th/pci.c b/drivers/hwtracing/intel_th/pci.c index f1dc1eef9ba2..f321e5ffe2a7 100644 --- a/drivers/hwtracing/intel_th/pci.c +++ b/drivers/hwtracing/intel_th/pci.c @@ -233,6 +233,11 @@ static const struct pci_device_id intel_th_pci_id_table[] = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xa0a6), .driver_data = (kernel_ulong_t)&intel_th_2x, }, + { + /* Tiger Lake PCH-H */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x43a6), + .driver_data = (kernel_ulong_t)&intel_th_2x, + }, { /* Jasper Lake PCH */ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4da6), -- cgit v1.2.3 From fd73d74a32bfaaf259441322cc5a1c83caaa94f2 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Mon, 6 Jul 2020 19:13:38 +0300 Subject: intel_th: pci: Add Emmitsburg PCH support This adds support for the Trace Hub in Emmitsburg PCH. Signed-off-by: Alexander Shishkin Reviewed-by: Andy Shevchenko Cc: stable@vger.kernel.org # v4.14+ Link: https://lore.kernel.org/r/20200706161339.55468-4-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/intel_th/pci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hwtracing/intel_th/pci.c b/drivers/hwtracing/intel_th/pci.c index f321e5ffe2a7..21fdf0b93516 100644 --- a/drivers/hwtracing/intel_th/pci.c +++ b/drivers/hwtracing/intel_th/pci.c @@ -258,6 +258,11 @@ static const struct pci_device_id intel_th_pci_id_table[] = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4b26), .driver_data = (kernel_ulong_t)&intel_th_2x, }, + { + /* Emmitsburg PCH */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x1bcc), + .driver_data = (kernel_ulong_t)&intel_th_2x, + }, { 0 }, }; -- cgit v1.2.3 From e78e1fdb282726beaf88aa75943682217e6ded0e Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Mon, 6 Jul 2020 19:13:39 +0300 Subject: intel_th: Fix a NULL dereference when hub driver is not loaded Connecting master to an output port when GTH driver module is not loaded triggers a NULL dereference: > RIP: 0010:intel_th_set_output+0x35/0x70 [intel_th] > Call Trace: > ? sth_stm_link+0x12/0x20 [intel_th_sth] > stm_source_link_store+0x164/0x270 [stm_core] > dev_attr_store+0x17/0x30 > sysfs_kf_write+0x3e/0x50 > kernfs_fop_write+0xda/0x1b0 > __vfs_write+0x1b/0x40 > vfs_write+0xb9/0x1a0 > ksys_write+0x67/0xe0 > __x64_sys_write+0x1a/0x20 > do_syscall_64+0x57/0x1d0 > entry_SYSCALL_64_after_hwframe+0x44/0xa9 Make sure the module in question is loaded and return an error if not. Signed-off-by: Alexander Shishkin Fixes: 39f4034693b7c ("intel_th: Add driver infrastructure for Intel(R) Trace Hub devices") Reviewed-by: Andy Shevchenko Reported-by: Ammy Yi Tested-by: Ammy Yi Cc: stable@vger.kernel.org # v4.4 Link: https://lore.kernel.org/r/20200706161339.55468-5-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/intel_th/core.c | 21 ++++++++++++++++++--- drivers/hwtracing/intel_th/sth.c | 4 +--- 2 files changed, 19 insertions(+), 6 deletions(-) diff --git a/drivers/hwtracing/intel_th/core.c b/drivers/hwtracing/intel_th/core.c index ca232ec565e8..c9ac3dc65113 100644 --- a/drivers/hwtracing/intel_th/core.c +++ b/drivers/hwtracing/intel_th/core.c @@ -1021,15 +1021,30 @@ int intel_th_set_output(struct intel_th_device *thdev, { struct intel_th_device *hub = to_intel_th_hub(thdev); struct intel_th_driver *hubdrv = to_intel_th_driver(hub->dev.driver); + int ret; /* In host mode, this is up to the external debugger, do nothing. */ if (hub->host_mode) return 0; - if (!hubdrv->set_output) - return -ENOTSUPP; + /* + * hub is instantiated together with the source device that + * calls here, so guaranteed to be present. + */ + hubdrv = to_intel_th_driver(hub->dev.driver); + if (!hubdrv || !try_module_get(hubdrv->driver.owner)) + return -EINVAL; + + if (!hubdrv->set_output) { + ret = -ENOTSUPP; + goto out; + } + + ret = hubdrv->set_output(hub, master); - return hubdrv->set_output(hub, master); +out: + module_put(hubdrv->driver.owner); + return ret; } EXPORT_SYMBOL_GPL(intel_th_set_output); diff --git a/drivers/hwtracing/intel_th/sth.c b/drivers/hwtracing/intel_th/sth.c index 3a1f4e650378..a1529f571491 100644 --- a/drivers/hwtracing/intel_th/sth.c +++ b/drivers/hwtracing/intel_th/sth.c @@ -161,9 +161,7 @@ static int sth_stm_link(struct stm_data *stm_data, unsigned int master, { struct sth_device *sth = container_of(stm_data, struct sth_device, stm); - intel_th_set_output(to_intel_th_device(sth->dev), master); - - return 0; + return intel_th_set_output(to_intel_th_device(sth->dev), master); } static int intel_th_sw_init(struct sth_device *sth) -- cgit v1.2.3 From 897c44f0bae574c5fb318c759b060bebf9dd6013 Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 23 Jun 2020 11:09:33 +0000 Subject: virtio: virtio_console: add missing MODULE_DEVICE_TABLE() for rproc serial rproc_serial_id_table lacks an exposure to module devicetable, so when remoteproc firmware requests VIRTIO_ID_RPROC_SERIAL, no uevent is generated and no module autoloading occurs. Add missing MODULE_DEVICE_TABLE() annotation and move the existing one for VIRTIO_ID_CONSOLE right to the table itself. Fixes: 1b6370463e88 ("virtio_console: Add support for remoteproc serial") Cc: # v3.8+ Signed-off-by: Alexander Lobakin Reviewed-by: Amit Shah Link: https://lore.kernel.org/r/x7C_CbeJtoGMy258nwAXASYz3xgFMFpyzmUvOyZzRnQrgWCREBjaqBOpAUS7ol4NnZYvSVwmTsCG0Ohyfvta-ygw6HMHcoeKK0C3QFiAO_Q=@pm.me Signed-off-by: Greg Kroah-Hartman --- drivers/char/virtio_console.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 00c5e3acee46..ca691bce9791 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -2116,6 +2116,7 @@ static struct virtio_device_id id_table[] = { { VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID }, { 0 }, }; +MODULE_DEVICE_TABLE(virtio, id_table); static unsigned int features[] = { VIRTIO_CONSOLE_F_SIZE, @@ -2128,6 +2129,7 @@ static struct virtio_device_id rproc_serial_id_table[] = { #endif { 0 }, }; +MODULE_DEVICE_TABLE(virtio, rproc_serial_id_table); static unsigned int rproc_serial_features[] = { }; @@ -2280,6 +2282,5 @@ static void __exit fini(void) module_init(init); module_exit(fini); -MODULE_DEVICE_TABLE(virtio, id_table); MODULE_DESCRIPTION("Virtio console driver"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From cec72f3efc6272420c2c2c699607f03d09b93e41 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 1 Jul 2020 12:42:57 -0700 Subject: driver core: Don't do deferred probe in parallel with kernel_init thread The current deferred probe implementation can mess up suspend/resume ordering if deferred probe thread is kicked off in parallel with the main initcall thread (kernel_init thread) [1]. For example: Say device-B is a consumer of device-A. Initcall thread Deferred probe thread =============== ===================== 1. device-A is added. 2. device-B is added. 3. dpm_list is now [device-A, device-B]. 4. driver-A defers probe of device-A. 5. device-A is moved to end of dpm_list 6. dpm_list is now [device-B, device-A] 7. driver-B is registereed and probes device-B. 8. dpm_list stays as [device-B, device-A]. The reverse order of dpm_list is used for suspend. So in this case device-A would incorrectly get suspended before device-B. Commit 716a7a259690 ("driver core: fw_devlink: Add support for batching fwnode parsing") kicked off the deferred probe thread early during boot to run in parallel with the initcall thread and caused suspend/resume regressions. This patch removes the parallel run of the deferred probe thread to avoid the suspend/resume regressions. [1] - https://lore.kernel.org/lkml/CAGETcx8W96KAw-d_siTX4qHB_-7ddk0miYRDQeHE6E0_8qx-6Q@mail.gmail.com/ Fixes: 716a7a259690 ("driver core: fw_devlink: Add support for batching fwnode parsing") Signed-off-by: Saravana Kannan Tested-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20200701194259.3337652-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/base.h | 1 - drivers/base/core.c | 1 - drivers/base/dd.c | 5 ----- 3 files changed, 7 deletions(-) diff --git a/drivers/base/base.h b/drivers/base/base.h index 95c22c0f9036..40fb069a8a7e 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -153,7 +153,6 @@ extern char *make_class_name(const char *name, struct kobject *kobj); extern int devres_release_all(struct device *dev); extern void device_block_probing(void); extern void device_unblock_probing(void); -extern void driver_deferred_probe_force_trigger(void); /* /sys/devices directory */ extern struct kset *devices_kset; diff --git a/drivers/base/core.c b/drivers/base/core.c index 67d39a90b45c..35cc9896eb9e 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1323,7 +1323,6 @@ void fw_devlink_resume(void) goto out; device_link_add_missing_supplier_links(); - driver_deferred_probe_force_trigger(); out: mutex_unlock(&defer_fw_devlink_lock); } diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 9a1d940342ac..48ca81cb8ebc 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -164,11 +164,6 @@ static void driver_deferred_probe_trigger(void) if (!driver_deferred_probe_enable) return; - driver_deferred_probe_force_trigger(); -} - -void driver_deferred_probe_force_trigger(void) -{ /* * A successful probe means that all the devices in the pending list * should be triggered to be reprobed. Move all the deferred devices -- cgit v1.2.3 From ec7bd78498f29680f536451fbdf9464e851273ed Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 1 Jul 2020 12:42:58 -0700 Subject: driver core: Rename dev_links_info.defer_sync to defer_hook The defer_sync field is used as a hook to add the device to the deferred_sync list. Rename it so that it's more meaningful for the next patch that'll also use this field as a hook to a deferred_fw_devlink list. Signed-off-by: Saravana Kannan Reviewed-by: Rafael J. Wysocki Tested-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20200701194259.3337652-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 22 +++++++++++----------- include/linux/device.h | 4 ++-- 2 files changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 35cc9896eb9e..d1d2cdc3a8d8 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -754,11 +754,11 @@ static void __device_links_queue_sync_state(struct device *dev, */ dev->state_synced = true; - if (WARN_ON(!list_empty(&dev->links.defer_sync))) + if (WARN_ON(!list_empty(&dev->links.defer_hook))) return; get_device(dev); - list_add_tail(&dev->links.defer_sync, list); + list_add_tail(&dev->links.defer_hook, list); } /** @@ -776,8 +776,8 @@ static void device_links_flush_sync_list(struct list_head *list, { struct device *dev, *tmp; - list_for_each_entry_safe(dev, tmp, list, links.defer_sync) { - list_del_init(&dev->links.defer_sync); + list_for_each_entry_safe(dev, tmp, list, links.defer_hook) { + list_del_init(&dev->links.defer_hook); if (dev != dont_lock_dev) device_lock(dev); @@ -815,12 +815,12 @@ void device_links_supplier_sync_state_resume(void) if (defer_sync_state_count) goto out; - list_for_each_entry_safe(dev, tmp, &deferred_sync, links.defer_sync) { + list_for_each_entry_safe(dev, tmp, &deferred_sync, links.defer_hook) { /* * Delete from deferred_sync list before queuing it to - * sync_list because defer_sync is used for both lists. + * sync_list because defer_hook is used for both lists. */ - list_del_init(&dev->links.defer_sync); + list_del_init(&dev->links.defer_hook); __device_links_queue_sync_state(dev, &sync_list); } out: @@ -838,8 +838,8 @@ late_initcall(sync_state_resume_initcall); static void __device_links_supplier_defer_sync(struct device *sup) { - if (list_empty(&sup->links.defer_sync) && dev_has_sync_state(sup)) - list_add_tail(&sup->links.defer_sync, &deferred_sync); + if (list_empty(&sup->links.defer_hook) && dev_has_sync_state(sup)) + list_add_tail(&sup->links.defer_hook, &deferred_sync); } static void device_link_drop_managed(struct device_link *link) @@ -1052,7 +1052,7 @@ void device_links_driver_cleanup(struct device *dev) WRITE_ONCE(link->status, DL_STATE_DORMANT); } - list_del_init(&dev->links.defer_sync); + list_del_init(&dev->links.defer_hook); __device_links_no_driver(dev); device_links_write_unlock(); @@ -2171,7 +2171,7 @@ void device_initialize(struct device *dev) INIT_LIST_HEAD(&dev->links.consumers); INIT_LIST_HEAD(&dev->links.suppliers); INIT_LIST_HEAD(&dev->links.needs_suppliers); - INIT_LIST_HEAD(&dev->links.defer_sync); + INIT_LIST_HEAD(&dev->links.defer_hook); dev->links.status = DL_DEV_NO_DRIVER; } EXPORT_SYMBOL_GPL(device_initialize); diff --git a/include/linux/device.h b/include/linux/device.h index 15460a5ac024..9bb2bc7bb8e3 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -433,7 +433,7 @@ enum dl_dev_state { * @suppliers: List of links to supplier devices. * @consumers: List of links to consumer devices. * @needs_suppliers: Hook to global list of devices waiting for suppliers. - * @defer_sync: Hook to global list of devices that have deferred sync_state. + * @defer_hook: Hook to global list of devices that have deferred sync_state. * @need_for_probe: If needs_suppliers is on a list, this indicates if the * suppliers are needed for probe or not. * @status: Driver status information. @@ -442,7 +442,7 @@ struct dev_links_info { struct list_head suppliers; struct list_head consumers; struct list_head needs_suppliers; - struct list_head defer_sync; + struct list_head defer_hook; bool need_for_probe; enum dl_dev_state status; }; -- cgit v1.2.3 From 2451e746478a6a6e981cfa66b62b791ca93b90c8 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 1 Jul 2020 12:42:59 -0700 Subject: driver core: Avoid deferred probe due to fw_devlink_pause/resume() With the earlier patch in this series, all devices that deferred probe due to fw_devlink_pause() will have their probes delayed till the deferred probe thread is kicked off during late_initcall. This will also affect all their consumers. This delayed probing in unnecessary. So this patch just keeps track of the devices that had their probe deferred due to fw_devlink_pause() and attempts to probe them once during fw_devlink_resume(). Fixes: 716a7a259690 ("driver core: fw_devlink: Add support for batching fwnode parsing") Signed-off-by: Saravana Kannan Tested-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20200701194259.3337652-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 21 +++++++++++++++++++++ include/linux/device.h | 3 ++- 2 files changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index d1d2cdc3a8d8..05d414e9e8a4 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -50,6 +50,7 @@ static DEFINE_MUTEX(wfs_lock); static LIST_HEAD(deferred_sync); static unsigned int defer_sync_state_count = 1; static unsigned int defer_fw_devlink_count; +static LIST_HEAD(deferred_fw_devlink); static DEFINE_MUTEX(defer_fw_devlink_lock); static bool fw_devlink_is_permissive(void); @@ -1244,6 +1245,12 @@ static void fw_devlink_link_device(struct device *dev) fw_ret = -EAGAIN; } else { fw_ret = -ENODEV; + /* + * defer_hook is not used to add device to deferred_sync list + * until device is bound. Since deferred fw devlink also blocks + * probing, same list hook can be used for deferred_fw_devlink. + */ + list_add_tail(&dev->links.defer_hook, &deferred_fw_devlink); } if (fw_ret == -ENODEV) @@ -1312,6 +1319,9 @@ void fw_devlink_pause(void) */ void fw_devlink_resume(void) { + struct device *dev, *tmp; + LIST_HEAD(probe_list); + mutex_lock(&defer_fw_devlink_lock); if (!defer_fw_devlink_count) { WARN(true, "Unmatched fw_devlink pause/resume!"); @@ -1323,8 +1333,19 @@ void fw_devlink_resume(void) goto out; device_link_add_missing_supplier_links(); + list_splice_tail_init(&deferred_fw_devlink, &probe_list); out: mutex_unlock(&defer_fw_devlink_lock); + + /* + * bus_probe_device() can cause new devices to get added and they'll + * try to grab defer_fw_devlink_lock. So, this needs to be done outside + * the defer_fw_devlink_lock. + */ + list_for_each_entry_safe(dev, tmp, &probe_list, links.defer_hook) { + list_del_init(&dev->links.defer_hook); + bus_probe_device(dev); + } } /* Device links support end. */ diff --git a/include/linux/device.h b/include/linux/device.h index 9bb2bc7bb8e3..5efed864b387 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -433,7 +433,8 @@ enum dl_dev_state { * @suppliers: List of links to supplier devices. * @consumers: List of links to consumer devices. * @needs_suppliers: Hook to global list of devices waiting for suppliers. - * @defer_hook: Hook to global list of devices that have deferred sync_state. + * @defer_hook: Hook to global list of devices that have deferred sync_state or + * deferred fw_devlink. * @need_for_probe: If needs_suppliers is on a list, this indicates if the * suppliers are needed for probe or not. * @status: Driver status information. -- cgit v1.2.3 From 6e8a914ad619042c5f25a4feb663357c4170fd8d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 10 Jul 2020 15:33:51 +0200 Subject: ALSA: line6: Perform sanity check for each URB creation LINE6 drivers create stream URBs with a fixed pipe without checking its validity, and this may lead to a kernel WARNING at the submission when a malformed USB descriptor is passed. For avoiding the kernel warning, perform the similar sanity checks for each pipe type at creating a URB. Reported-by: syzbot+c190f6858a04ea7fbc52@syzkaller.appspotmail.com Cc: Link: https://lore.kernel.org/r/s5hv9iv4hq8.wl-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/line6/capture.c | 2 ++ sound/usb/line6/playback.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/sound/usb/line6/capture.c b/sound/usb/line6/capture.c index 663d608c4287..970c9bdce0b2 100644 --- a/sound/usb/line6/capture.c +++ b/sound/usb/line6/capture.c @@ -286,6 +286,8 @@ int line6_create_audio_in_urbs(struct snd_line6_pcm *line6pcm) urb->interval = LINE6_ISO_INTERVAL; urb->error_count = 0; urb->complete = audio_in_callback; + if (usb_urb_ep_type_check(urb)) + return -EINVAL; } return 0; diff --git a/sound/usb/line6/playback.c b/sound/usb/line6/playback.c index 01930ce7bd75..8233c61e23f1 100644 --- a/sound/usb/line6/playback.c +++ b/sound/usb/line6/playback.c @@ -431,6 +431,8 @@ int line6_create_audio_out_urbs(struct snd_line6_pcm *line6pcm) urb->interval = LINE6_ISO_INTERVAL; urb->error_count = 0; urb->complete = audio_out_callback; + if (usb_urb_ep_type_check(urb)) + return -EINVAL; } return 0; -- cgit v1.2.3 From 68359a1ad8447c99732ebeab8c169bfed543667a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 10 Jul 2020 15:59:59 +0200 Subject: ALSA: line6: Sync the pending work cancel at disconnection Recently syzkaller reported a UAF in LINE6 driver, and it's likely because we call cancel_delayed_work() at the disconnect callback instead of cancel_delayed_work_sync(). Let's use the correct one instead. Reported-by: syzbot+145012a46658ac00fc9e@syzkaller.appspotmail.com Suggested-by: Alan Stern Cc: Link: https://lore.kernel.org/r/s5hlfjr4gio.wl-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/line6/driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c index 7629116f570e..2746d9698180 100644 --- a/sound/usb/line6/driver.c +++ b/sound/usb/line6/driver.c @@ -840,7 +840,7 @@ void line6_disconnect(struct usb_interface *interface) if (WARN_ON(usbdev != line6->usbdev)) return; - cancel_delayed_work(&line6->startup_work); + cancel_delayed_work_sync(&line6->startup_work); if (line6->urb_listen != NULL) line6_stop_listen(line6); -- cgit v1.2.3 From 9b7e5208a941e2e491a83eb5fa83d889e888fa2f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 10 Jul 2020 18:06:56 +0200 Subject: ALSA: usb-audio: Fix race against the error recovery URB submission USB MIDI driver has an error recovery mechanism to resubmit the URB in the delayed timer handler, and this may race with the standard start / stop operations. Although both start and stop operations themselves don't race with each other due to the umidi->mutex protection, but this isn't applied to the timer handler. For fixing this potential race, the following changes are applied: - Since the timer handler can't use the mutex, we apply the umidi->disc_lock protection at each input stream URB submission; this also needs to change the GFP flag to GFP_ATOMIC - Add a check of the URB refcount and skip if already submitted - Move the timer cancel call at disconnection to the beginning of the procedure; this assures the in-flight timer handler is gone properly before killing all pending URBs Reported-by: syzbot+0f4ecfe6a2c322c81728@syzkaller.appspotmail.com Reported-by: syzbot+5f1d24c49c1d2c427497@syzkaller.appspotmail.com Cc: Link: https://lore.kernel.org/r/20200710160656.16819-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/midi.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/sound/usb/midi.c b/sound/usb/midi.c index 047b90595d65..354f57692938 100644 --- a/sound/usb/midi.c +++ b/sound/usb/midi.c @@ -1499,6 +1499,8 @@ void snd_usbmidi_disconnect(struct list_head *p) spin_unlock_irq(&umidi->disc_lock); up_write(&umidi->disc_rwsem); + del_timer_sync(&umidi->error_timer); + for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { struct snd_usb_midi_endpoint *ep = &umidi->endpoints[i]; if (ep->out) @@ -1525,7 +1527,6 @@ void snd_usbmidi_disconnect(struct list_head *p) ep->in = NULL; } } - del_timer_sync(&umidi->error_timer); } EXPORT_SYMBOL(snd_usbmidi_disconnect); @@ -2301,16 +2302,22 @@ void snd_usbmidi_input_stop(struct list_head *p) } EXPORT_SYMBOL(snd_usbmidi_input_stop); -static void snd_usbmidi_input_start_ep(struct snd_usb_midi_in_endpoint *ep) +static void snd_usbmidi_input_start_ep(struct snd_usb_midi *umidi, + struct snd_usb_midi_in_endpoint *ep) { unsigned int i; + unsigned long flags; if (!ep) return; for (i = 0; i < INPUT_URBS; ++i) { struct urb *urb = ep->urbs[i]; - urb->dev = ep->umidi->dev; - snd_usbmidi_submit_urb(urb, GFP_KERNEL); + spin_lock_irqsave(&umidi->disc_lock, flags); + if (!atomic_read(&urb->use_count)) { + urb->dev = ep->umidi->dev; + snd_usbmidi_submit_urb(urb, GFP_ATOMIC); + } + spin_unlock_irqrestore(&umidi->disc_lock, flags); } } @@ -2326,7 +2333,7 @@ void snd_usbmidi_input_start(struct list_head *p) if (umidi->input_running || !umidi->opened[1]) return; for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) - snd_usbmidi_input_start_ep(umidi->endpoints[i].in); + snd_usbmidi_input_start_ep(umidi, umidi->endpoints[i].in); umidi->input_running = 1; } EXPORT_SYMBOL(snd_usbmidi_input_start); -- cgit v1.2.3 From ef9ddb9dc4f8b1da3b975918cd1fd98ec055b918 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Fri, 10 Jul 2020 15:31:11 +0800 Subject: ALSA: hda/realtek - change to suitable link model for ASUS platform ASUS platform couldn't need to use Headset Mode model. It changes to the suitable model. Signed-off-by: Kailang Yang Cc: Link: https://lore.kernel.org/r/d05bcff170784ec7bb35023407148161@realtek.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 194ffa8c66ce..7aaf248a84c6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7117,7 +7117,7 @@ static const struct hda_fixup alc269_fixups[] = { { } }, .chained = true, - .chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC + .chain_id = ALC269_FIXUP_HEADSET_MIC }, [ALC294_FIXUP_ASUS_HEADSET_MIC] = { .type = HDA_FIXUP_PINS, @@ -7126,7 +7126,7 @@ static const struct hda_fixup alc269_fixups[] = { { } }, .chained = true, - .chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC + .chain_id = ALC269_FIXUP_HEADSET_MIC }, [ALC294_FIXUP_ASUS_SPK] = { .type = HDA_FIXUP_VERBS, -- cgit v1.2.3 From ff53664daff2a65f4bf2479ac56dfb3e908deff0 Mon Sep 17 00:00:00 2001 From: Armas Spann Date: Sat, 11 Jul 2020 13:05:57 +0200 Subject: ALSA: hda/realtek: enable headset mic of ASUS ROG Zephyrus G14(G401) series with ALC289 This patch adds support for headset mic to the ASUS ROG Zephyrus G14(GA401) notebook series by adding the corresponding vendor/pci_device id, as well as adding a new fixup for the used realtek ALC289. The fixup stets the correct pin to get the headset mic correctly recognized on audio-jack. Signed-off-by: Armas Spann Cc: Link: https://lore.kernel.org/r/20200711110557.18681-1-zappel@retarded.farm Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 7aaf248a84c6..876d5cb75437 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6152,6 +6152,7 @@ enum { ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS, ALC269VC_FIXUP_ACER_HEADSET_MIC, ALC269VC_FIXUP_ACER_MIC_NO_PRESENCE, + ALC289_FIXUP_ASUS_G401, }; static const struct hda_fixup alc269_fixups[] = { @@ -7359,6 +7360,13 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_HEADSET_MIC }, + [ALC289_FIXUP_ASUS_G401] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x03a11020 }, /* headset mic with jack detect */ + { } + }, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -7539,6 +7547,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC), + SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_G401), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x834a, "ASUS S101", ALC269_FIXUP_STEREO_DMIC), -- cgit v1.2.3 From 4237c625304b212a3f30adf787901082082511ec Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 23 Jun 2020 12:06:54 -0700 Subject: ARM: dts: imx6qdl-gw551x: fix audio SSI The audio codec on the GW551x routes to ssi1. It fixes audio capture on the device. Cc: stable@vger.kernel.org Fixes: 3117e851cef1 ("ARM: dts: imx: Add TDA19971 HDMI Receiver to GW551x") Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index c38e86eedcc0..8c33510c9519 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -110,7 +110,7 @@ simple-audio-card,frame-master = <&sound_codec>; sound_cpu: simple-audio-card,cpu { - sound-dai = <&ssi2>; + sound-dai = <&ssi1>; }; sound_codec: simple-audio-card,codec { -- cgit v1.2.3 From 8e3709d7e3a67e2d3f42bd1fc2052353a5678944 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Wed, 1 Jul 2020 13:11:29 -0700 Subject: clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER When building arm32 allmodconfig: ld.lld: error: undefined symbol: ap_cp_unique_name >>> referenced by ap-cpu-clk.c >>> clk/mvebu/ap-cpu-clk.o:(ap_cpu_clock_probe) in archive drivers/built-in.a ap_cp_unique_name is only compiled into the kernel image when CONFIG_ARMADA_AP_CP_HELPER is selected (as it is not user selectable). However, CONFIG_ARMADA_AP_CPU_CLK does not select it. This has been a problem since the driver was added to the kernel but it was not built before commit c318ea261749 ("cpufreq: ap806: fix cpufreq driver needs ap cpu clk") so it was never noticed. Fixes: f756e362d938 ("clk: mvebu: add CPU clock driver for Armada 7K/8K") Signed-off-by: Nathan Chancellor Link: https://lore.kernel.org/r/20200701201128.2448427-1-natechancellor@gmail.com Signed-off-by: Stephen Boyd --- drivers/clk/mvebu/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig index ded07b0bd0d5..557d6213783c 100644 --- a/drivers/clk/mvebu/Kconfig +++ b/drivers/clk/mvebu/Kconfig @@ -42,6 +42,7 @@ config ARMADA_AP806_SYSCON config ARMADA_AP_CPU_CLK bool + select ARMADA_AP_CP_HELPER config ARMADA_CP110_SYSCON bool -- cgit v1.2.3 From c2407ab3bd55064d459bc822efd1c134e852798c Mon Sep 17 00:00:00 2001 From: Eddie James Date: Thu, 9 Jul 2020 14:57:05 -0500 Subject: clk: AST2600: Add mux for EMMC clock The EMMC clock can be derived from either the HPLL or the MPLL. Register a clock mux so that the rate is calculated correctly based upon the parent. Signed-off-by: Eddie James Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20200709195706.12741-2-eajames@linux.ibm.com Acked-by: Joel Stanley Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC") Signed-off-by: Stephen Boyd --- drivers/clk/clk-ast2600.c | 49 +++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 41 insertions(+), 8 deletions(-) diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c index 99afc949925f..177368cac6dd 100644 --- a/drivers/clk/clk-ast2600.c +++ b/drivers/clk/clk-ast2600.c @@ -131,6 +131,18 @@ static const struct clk_div_table ast2600_eclk_div_table[] = { { 0 } }; +static const struct clk_div_table ast2600_emmc_extclk_div_table[] = { + { 0x0, 2 }, + { 0x1, 4 }, + { 0x2, 6 }, + { 0x3, 8 }, + { 0x4, 10 }, + { 0x5, 12 }, + { 0x6, 14 }, + { 0x7, 16 }, + { 0 } +}; + static const struct clk_div_table ast2600_mac_div_table[] = { { 0x0, 4 }, { 0x1, 4 }, @@ -390,6 +402,11 @@ static struct clk_hw *aspeed_g6_clk_hw_register_gate(struct device *dev, return hw; } +static const char *const emmc_extclk_parent_names[] = { + "emmc_extclk_hpll_in", + "mpll", +}; + static const char * const vclk_parent_names[] = { "dpll", "d1pll", @@ -459,16 +476,32 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_UARTX] = hw; - /* EMMC ext clock divider */ - hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "hpll", 0, - scu_g6_base + ASPEED_G6_CLK_SELECTION1, 15, 0, - &aspeed_g6_clk_lock); + /* EMMC ext clock */ + hw = clk_hw_register_fixed_factor(dev, "emmc_extclk_hpll_in", "hpll", + 0, 1, 2); if (IS_ERR(hw)) return PTR_ERR(hw); - hw = clk_hw_register_divider_table(dev, "emmc_extclk", "emmc_extclk_gate", 0, - scu_g6_base + ASPEED_G6_CLK_SELECTION1, 12, 3, 0, - ast2600_div_table, - &aspeed_g6_clk_lock); + + hw = clk_hw_register_mux(dev, "emmc_extclk_mux", + emmc_extclk_parent_names, + ARRAY_SIZE(emmc_extclk_parent_names), 0, + scu_g6_base + ASPEED_G6_CLK_SELECTION1, 11, 1, + 0, &aspeed_g6_clk_lock); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "emmc_extclk_mux", + 0, scu_g6_base + ASPEED_G6_CLK_SELECTION1, + 15, 0, &aspeed_g6_clk_lock); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hw = clk_hw_register_divider_table(dev, "emmc_extclk", + "emmc_extclk_gate", 0, + scu_g6_base + + ASPEED_G6_CLK_SELECTION1, 12, + 3, 0, ast2600_emmc_extclk_div_table, + &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_EMMC] = hw; -- cgit v1.2.3 From 1e7468bd9d30a21e059af477106dc5588ae52dff Mon Sep 17 00:00:00 2001 From: David Gow Date: Mon, 29 Jun 2020 21:32:14 -0700 Subject: clk: Specify IOMEM dependency for HSDK pll driver The HSDK pll driver uses the devm_ioremap_resource function, but does not specify a dependency on IOMEM in Kconfig. This causes a build failure on architectures without IOMEM, for example, UML (notably with make allyesconfig). Fix this by making CONFIG_CLK_HSDK depend on CONFIG_IOMEM. Signed-off-by: David Gow Link: https://lore.kernel.org/r/20200630043214.1080961-1-davidgow@google.com Signed-off-by: Stephen Boyd --- drivers/clk/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 69934c0c3dd8..326f91b2dda9 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -50,6 +50,7 @@ source "drivers/clk/versatile/Kconfig" config CLK_HSDK bool "PLL Driver for HSDK platform" depends on OF || COMPILE_TEST + depends on IOMEM help This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs control. -- cgit v1.2.3 From dd821e0c95a64b5923a0c57f07d3f7563553e756 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Sun, 12 Jul 2020 13:23:08 +0300 Subject: io_uring: fix missing msg_name assignment Ensure to set msg.msg_name for the async portion of send/recvmsg, as the header copy will copy to/from it. Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Pavel Begunkov Signed-off-by: Jens Axboe --- fs/io_uring.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/io_uring.c b/fs/io_uring.c index ca8abde48b6c..5570d6aeaff8 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -3553,6 +3553,7 @@ static int io_sendmsg_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe) if (req->flags & REQ_F_NEED_CLEANUP) return 0; + io->msg.msg.msg_name = &io->msg.addr; io->msg.iov = io->msg.fast_iov; ret = sendmsg_copy_msghdr(&io->msg.msg, sr->msg, sr->msg_flags, &io->msg.iov); @@ -3734,6 +3735,7 @@ static int __io_compat_recvmsg_copy_hdr(struct io_kiocb *req, static int io_recvmsg_copy_hdr(struct io_kiocb *req, struct io_async_ctx *io) { + io->msg.msg.msg_name = &io->msg.addr; io->msg.iov = io->msg.fast_iov; #ifdef CONFIG_COMPAT -- cgit v1.2.3 From 16d598030a37853a7a6b4384cad19c9c0af2f021 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Sun, 12 Jul 2020 16:16:47 +0300 Subject: io_uring: fix not initialised work->flags 59960b9deb535 ("io_uring: fix lazy work init") tried to fix missing io_req_init_async(), but left out work.flags and hash. Do it earlier. Fixes: 7cdaf587de7c ("io_uring: avoid whole io_wq_work copy for requests completed inline") Signed-off-by: Pavel Begunkov Signed-off-by: Jens Axboe --- fs/io_uring.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 5570d6aeaff8..9fd7e69696c3 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -1096,6 +1096,8 @@ static inline void io_prep_async_work(struct io_kiocb *req, { const struct io_op_def *def = &io_op_defs[req->opcode]; + io_req_init_async(req); + if (req->flags & REQ_F_ISREG) { if (def->hash_reg_file) io_wq_hash_work(&req->work, file_inode(req->file)); @@ -1104,7 +1106,6 @@ static inline void io_prep_async_work(struct io_kiocb *req, req->work.flags |= IO_WQ_WORK_UNBOUND; } - io_req_init_async(req); io_req_work_grab_env(req, def); *link = io_prep_linked_timeout(req); -- cgit v1.2.3 From 163e9ef63641a02de4c95cd921577265c52e1ce2 Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Sat, 11 Jul 2020 20:48:23 -0400 Subject: bnxt_en: Fix race when modifying pause settings. The driver was modified to not rely on rtnl lock to protect link settings about 2 years ago. The pause setting was missed when making that change. Fix it by acquiring link_lock mutex before calling bnxt_hwrm_set_pause(). Fixes: e2dc9b6e38fa ("bnxt_en: Don't use rtnl lock to protect link change logic in workqueue.") Signed-off-by: Vasundhara Volam Reviewed-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index 6b88143af5ea..b4aa56dc4f9f 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -1765,8 +1765,11 @@ static int bnxt_set_pauseparam(struct net_device *dev, if (epause->tx_pause) link_info->req_flow_ctrl |= BNXT_LINK_PAUSE_TX; - if (netif_running(dev)) + if (netif_running(dev)) { + mutex_lock(&bp->link_lock); rc = bnxt_hwrm_set_pause(bp); + mutex_unlock(&bp->link_lock); + } return rc; } -- cgit v1.2.3 From ca0c753815fe4786b79a80abf0412eb5d52090b8 Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Sat, 11 Jul 2020 20:48:24 -0400 Subject: bnxt_en: Init ethtool link settings after reading updated PHY configuration. In a shared port PHY configuration, async event is received when any of the port modifies the configuration. Ethtool link settings should be initialised after updated PHY configuration from firmware. Fixes: b1613e78e98d ("bnxt_en: Add async. event logic for PHY configuration changes.") Signed-off-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 6a884df44612..28147e414081 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -10385,15 +10385,15 @@ static void bnxt_sp_task(struct work_struct *work) &bp->sp_event)) bnxt_hwrm_phy_qcaps(bp); - if (test_and_clear_bit(BNXT_LINK_CFG_CHANGE_SP_EVENT, - &bp->sp_event)) - bnxt_init_ethtool_link_settings(bp); - rc = bnxt_update_link(bp, true); - mutex_unlock(&bp->link_lock); if (rc) netdev_err(bp->dev, "SP task can't update link (rc: %x)\n", rc); + + if (test_and_clear_bit(BNXT_LINK_CFG_CHANGE_SP_EVENT, + &bp->sp_event)) + bnxt_init_ethtool_link_settings(bp); + mutex_unlock(&bp->link_lock); } if (test_and_clear_bit(BNXT_UPDATE_PHY_SP_EVENT, &bp->sp_event)) { int rc; -- cgit v1.2.3 From 27640ce68d21e556b66bc5fa022aacd26e53c947 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sat, 11 Jul 2020 20:48:25 -0400 Subject: bnxt_en: Fix completion ring sizing with TPA enabled. The current completion ring sizing formula is wrong with TPA enabled. The formula assumes that the number of TPA completions are bound by the RX ring size, but that's not true. TPA_START completions are immediately recycled so they are not bound by the RX ring size. We must add bp->max_tpa to the worst case maximum RX and TPA completions. The completion ring can overflow because of this mistake. This will cause hardware to disable the completion ring when this happens, leading to RX and TX traffic to stall on that ring. This issue is generally exposed only when the RX ring size is set very small. Fix the formula by adding bp->max_tpa to the number of RX completions if TPA is enabled. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver."); Reviewed-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 28147e414081..7463a1847ceb 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -3418,7 +3418,7 @@ void bnxt_set_tpa_flags(struct bnxt *bp) */ void bnxt_set_ring_params(struct bnxt *bp) { - u32 ring_size, rx_size, rx_space; + u32 ring_size, rx_size, rx_space, max_rx_cmpl; u32 agg_factor = 0, agg_ring_size = 0; /* 8 for CRC and VLAN */ @@ -3474,7 +3474,15 @@ void bnxt_set_ring_params(struct bnxt *bp) bp->tx_nr_pages = bnxt_calc_nr_ring_pages(ring_size, TX_DESC_CNT); bp->tx_ring_mask = (bp->tx_nr_pages * TX_DESC_CNT) - 1; - ring_size = bp->rx_ring_size * (2 + agg_factor) + bp->tx_ring_size; + max_rx_cmpl = bp->rx_ring_size; + /* MAX TPA needs to be added because TPA_START completions are + * immediately recycled, so the TPA completions are not bound by + * the RX ring size. + */ + if (bp->flags & BNXT_FLAG_TPA) + max_rx_cmpl += bp->max_tpa; + /* RX and TPA completions are 32-byte, all others are 16-byte */ + ring_size = max_rx_cmpl * 2 + agg_ring_size + bp->tx_ring_size; bp->cp_ring_size = ring_size; bp->cp_nr_pages = bnxt_calc_nr_ring_pages(ring_size, CP_DESC_CNT); -- cgit v1.2.3 From 11ba468877bb23f28956a35e896356252d63c983 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 12 Jul 2020 16:34:50 -0700 Subject: Linux 5.8-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index fe0164a654c7..0b5f8538bde5 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 8 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Kleptomaniac Octopus # *DOCUMENTATION* -- cgit v1.2.3 From 2a83544007aba792167615c393e6154824f3a175 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 30 Jun 2020 20:26:51 -0700 Subject: ARM: imx: Provide correct number of resources when registering gpio devices Since commit a85a6c86c25be ("driver core: platform: Clarify that IRQ 0 is invalid"), the kernel is a bit touchy when it encounters interrupt 0. As a result, there are lots of warnings such as the following when booting systems such as 'kzm'. WARNING: CPU: 0 PID: 1 at drivers/base/platform.c:224 platform_get_irq_optional+0x118/0x128 0 is an invalid IRQ number Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3 #1 Hardware name: Kyoto Microcomputer Co., Ltd. KZM-ARM11-01 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0xe8/0x120) [] (dump_stack) from [] (__warn+0xe4/0x108) [] (__warn) from [] (warn_slowpath_fmt+0x74/0xbc) [] (warn_slowpath_fmt) from [] (platform_get_irq_optional+0x118/0x128) [] (platform_get_irq_optional) from [] (platform_irq_count+0x20/0x3c) [] (platform_irq_count) from [] (mxc_gpio_probe+0x8c/0x494) [] (mxc_gpio_probe) from [] (platform_drv_probe+0x48/0x98) [] (platform_drv_probe) from [] (really_probe+0x214/0x344) [] (really_probe) from [] (driver_probe_device+0x58/0xb4) [] (driver_probe_device) from [] (device_driver_attach+0x58/0x60) [] (device_driver_attach) from [] (__driver_attach+0x84/0xc0) [] (__driver_attach) from [] (bus_for_each_dev+0x78/0xb8) [] (bus_for_each_dev) from [] (bus_add_driver+0x154/0x1e0) [] (bus_add_driver) from [] (driver_register+0x74/0x108) [] (driver_register) from [] (do_one_initcall+0x80/0x3b4) [] (do_one_initcall) from [] (kernel_init_freeable+0x170/0x208) [] (kernel_init_freeable) from [] (kernel_init+0x8/0x11c) [] (kernel_init) from [] (ret_from_fork+0x14/0x20) As it turns out, mxc_register_gpio() is a bit lax when setting the number of resources: it registers a resource with interrupt 0 when in reality there is no such interrupt. Fix the problem by not declaring the second interrupt resource if there is no second interrupt. Fixes: a85a6c86c25be ("driver core: platform: Clarify that IRQ 0 is invalid") Cc: Bjorn Helgaas Signed-off-by: Guenter Roeck Signed-off-by: Shawn Guo --- arch/arm/mach-imx/devices/platform-gpio-mxc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c index 78628ef12672..355de845224c 100644 --- a/arch/arm/mach-imx/devices/platform-gpio-mxc.c +++ b/arch/arm/mach-imx/devices/platform-gpio-mxc.c @@ -24,7 +24,8 @@ struct platform_device *__init mxc_register_gpio(char *name, int id, .flags = IORESOURCE_IRQ, }, }; + unsigned int nres; - return platform_device_register_resndata(&mxc_aips_bus, - name, id, res, ARRAY_SIZE(res), NULL, 0); + nres = irq_high ? ARRAY_SIZE(res) : ARRAY_SIZE(res) - 1; + return platform_device_register_resndata(&mxc_aips_bus, name, id, res, nres, NULL, 0); } -- cgit v1.2.3 From f8951dce10c092075e39ef12c29022548e4c63db Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 1 Jul 2020 17:10:39 -0500 Subject: ARM: imx: Remove imx_add_imx_dma() unused irq_err argument No callers of imx_add_imx_dma() need an error IRQ, so they supply 0 as "irq_err", which means we register a resource of IRQ 0, which is invalid and causes a warning if used. Remove the "irq_err" argument altogether so there's no chance of trying to use the invalid IRQ 0. Fixes: a85a6c86c25be ("driver core: platform: Clarify that IRQ 0 is invalid") Signed-off-by: Bjorn Helgaas Cc: Russell King Cc: Shawn Guo Cc: Sascha Hauer Cc: kernel@pengutronix.de Cc: Fabio Estevam Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo --- arch/arm/mach-imx/devices/devices-common.h | 2 +- arch/arm/mach-imx/devices/platform-imx-dma.c | 6 +----- arch/arm/mach-imx/mm-imx21.c | 3 +-- arch/arm/mach-imx/mm-imx27.c | 3 +-- 4 files changed, 4 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 2a685adec1df..ae84c08e11fa 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -289,6 +289,6 @@ struct platform_device *__init imx_add_spi_imx( const struct spi_imx_master *pdata); struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase, - int irq, int irq_err); + int irq); struct platform_device *imx_add_imx_sdma(char *name, resource_size_t iobase, int irq, struct sdma_platform_data *pdata); diff --git a/arch/arm/mach-imx/devices/platform-imx-dma.c b/arch/arm/mach-imx/devices/platform-imx-dma.c index 26b47b36257b..12656f24ad0d 100644 --- a/arch/arm/mach-imx/devices/platform-imx-dma.c +++ b/arch/arm/mach-imx/devices/platform-imx-dma.c @@ -6,7 +6,7 @@ #include "devices-common.h" struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name, - resource_size_t iobase, int irq, int irq_err) + resource_size_t iobase, int irq) { struct resource res[] = { { @@ -17,10 +17,6 @@ struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name, .start = irq, .end = irq, .flags = IORESOURCE_IRQ, - }, { - .start = irq_err, - .end = irq_err, - .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 50a2edac8513..b834026e4615 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -78,8 +78,7 @@ void __init imx21_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); pinctrl_provide_dummies(); - imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR, - MX21_INT_DMACH0, 0); /* No ERR irq */ + imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR, MX21_INT_DMACH0); platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res, ARRAY_SIZE(imx21_audmux_res)); } diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 4e4125140025..2717614f101d 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -79,8 +79,7 @@ void __init imx27_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); pinctrl_provide_dummies(); - imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, - MX27_INT_DMACH0, 0); /* No ERR irq */ + imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, MX27_INT_DMACH0); /* imx27 has the imx21 type audmux */ platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res, ARRAY_SIZE(imx27_audmux_res)); -- cgit v1.2.3 From 192b6a780598976feb7321ff007754f8511a4129 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Sun, 12 Jul 2020 18:50:47 +0530 Subject: powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey Even if the IAMR value denies execute access, the current code returns true from pkey_access_permitted() for an execute permission check, if the AMR read pkey bit is cleared. This results in repeated page fault loop with a test like below: #define _GNU_SOURCE #include #include #include #include #include #include #include #include #include #include #ifdef SYS_pkey_mprotect #undef SYS_pkey_mprotect #endif #ifdef SYS_pkey_alloc #undef SYS_pkey_alloc #endif #ifdef SYS_pkey_free #undef SYS_pkey_free #endif #undef PKEY_DISABLE_EXECUTE #define PKEY_DISABLE_EXECUTE 0x4 #define SYS_pkey_mprotect 386 #define SYS_pkey_alloc 384 #define SYS_pkey_free 385 #define PPC_INST_NOP 0x60000000 #define PPC_INST_BLR 0x4e800020 #define PROT_RWX (PROT_READ | PROT_WRITE | PROT_EXEC) static int sys_pkey_mprotect(void *addr, size_t len, int prot, int pkey) { return syscall(SYS_pkey_mprotect, addr, len, prot, pkey); } static int sys_pkey_alloc(unsigned long flags, unsigned long access_rights) { return syscall(SYS_pkey_alloc, flags, access_rights); } static int sys_pkey_free(int pkey) { return syscall(SYS_pkey_free, pkey); } static void do_execute(void *region) { /* jump to region */ asm volatile( "mtctr %0;" "bctrl" : : "r"(region) : "ctr", "lr"); } static void do_protect(void *region) { size_t pgsize; int i, pkey; pgsize = getpagesize(); pkey = sys_pkey_alloc(0, PKEY_DISABLE_EXECUTE); assert (pkey > 0); /* perform mprotect */ assert(!sys_pkey_mprotect(region, pgsize, PROT_RWX, pkey)); do_execute(region); /* free pkey */ assert(!sys_pkey_free(pkey)); } int main(int argc, char **argv) { size_t pgsize, numinsns; unsigned int *region; int i; /* allocate memory region to protect */ pgsize = getpagesize(); region = memalign(pgsize, pgsize); assert(region != NULL); assert(!mprotect(region, pgsize, PROT_RWX)); /* fill page with NOPs with a BLR at the end */ numinsns = pgsize / sizeof(region[0]); for (i = 0; i < numinsns - 1; i++) region[i] = PPC_INST_NOP; region[i] = PPC_INST_BLR; do_protect(region); return EXIT_SUCCESS; } The fix is to only check the IAMR for an execute check, the AMR value is not relevant. Fixes: f2407ef3ba22 ("powerpc: helper to validate key-access permissions of a pte") Cc: stable@vger.kernel.org # v4.16+ Reported-by: Sandipan Das Signed-off-by: Aneesh Kumar K.V [mpe: Add detail to change log, tweak wording & formatting] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200712132047.1038594-1-aneesh.kumar@linux.ibm.com --- arch/powerpc/mm/book3s64/pkeys.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/mm/book3s64/pkeys.c b/arch/powerpc/mm/book3s64/pkeys.c index ca5fcb4bff32..d174106bab67 100644 --- a/arch/powerpc/mm/book3s64/pkeys.c +++ b/arch/powerpc/mm/book3s64/pkeys.c @@ -354,12 +354,14 @@ static bool pkey_access_permitted(int pkey, bool write, bool execute) u64 amr; pkey_shift = pkeyshift(pkey); - if (execute && !(read_iamr() & (IAMR_EX_BIT << pkey_shift))) - return true; + if (execute) + return !(read_iamr() & (IAMR_EX_BIT << pkey_shift)); + + amr = read_amr(); + if (write) + return !(amr & (AMR_WR_BIT << pkey_shift)); - amr = read_amr(); /* Delay reading amr until absolutely needed */ - return ((!write && !(amr & (AMR_RD_BIT << pkey_shift))) || - (write && !(amr & (AMR_WR_BIT << pkey_shift)))); + return !(amr & (AMR_RD_BIT << pkey_shift)); } bool arch_pte_access_permitted(u64 pte, bool write, bool execute) -- cgit v1.2.3 From f50a121d2f32bccc1d6b94df925a1ce44ea7eff7 Mon Sep 17 00:00:00 2001 From: Jian-Hong Pan Date: Mon, 13 Jul 2020 14:04:22 +0800 Subject: ALSA: hda/realtek: Enable headset mic of Acer TravelMate B311R-31 with ALC256 The Acer TravelMate B311R-31 laptop's audio (1025:1430) with ALC256 cannot detect the headset microphone until ALC256_FIXUP_ACER_MIC_NO_PRESENCE quirk maps the NID 0x19 as the headset mic pin. Signed-off-by: Jian-Hong Pan Cc: Link: https://lore.kernel.org/r/20200713060421.62435-1-jian-hong@endlessm.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 876d5cb75437..66e98a5cfea2 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6153,6 +6153,7 @@ enum { ALC269VC_FIXUP_ACER_HEADSET_MIC, ALC269VC_FIXUP_ACER_MIC_NO_PRESENCE, ALC289_FIXUP_ASUS_G401, + ALC256_FIXUP_ACER_MIC_NO_PRESENCE, }; static const struct hda_fixup alc269_fixups[] = { @@ -7367,6 +7368,15 @@ static const struct hda_fixup alc269_fixups[] = { { } }, }, + [ALC256_FIXUP_ACER_MIC_NO_PRESENCE] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x02a11120 }, /* use as headset mic, without its own jack detect */ + { } + }, + .chained = true, + .chain_id = ALC256_FIXUP_ASUS_HEADSET_MODE + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -7395,6 +7405,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1025, 0x1308, "Acer Aspire Z24-890", ALC286_FIXUP_ACER_AIO_HEADSET_MIC), SND_PCI_QUIRK(0x1025, 0x132a, "Acer TravelMate B114-21", ALC233_FIXUP_ACER_HEADSET_MIC), SND_PCI_QUIRK(0x1025, 0x1330, "Acer TravelMate X514-51T", ALC255_FIXUP_ACER_HEADSET_MIC), + SND_PCI_QUIRK(0x1025, 0x1430, "Acer TravelMate B311R-31", ALC256_FIXUP_ACER_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z), SND_PCI_QUIRK(0x1028, 0x054b, "Dell XPS one 2710", ALC275_FIXUP_DELL_XPS), SND_PCI_QUIRK(0x1028, 0x05bd, "Dell Latitude E6440", ALC292_FIXUP_DELL_E7X), -- cgit v1.2.3 From 7f6e8dffc30bd22b15ad810fb90ea741c15e6d54 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 9 Jul 2020 16:25:45 +0800 Subject: soc: imx: check ls1021a MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fsl,ls1021a is a mach under arch/arm/mach-imx/, however it could not use the soc driver which will break caam on ls1021a platform. So directly return if it is compatible with fsl,ls1021a. Fixes: 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx") Signed-off-by: Peng Fan Tested-by: Horia Geantă Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- drivers/soc/imx/soc-imx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/soc/imx/soc-imx.c b/drivers/soc/imx/soc-imx.c index fec3d672b606..01bfea1cb64a 100644 --- a/drivers/soc/imx/soc-imx.c +++ b/drivers/soc/imx/soc-imx.c @@ -33,6 +33,9 @@ static int __init imx_soc_device_init(void) u32 val; int ret; + if (of_machine_is_compatible("fsl,ls1021a")) + return 0; + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) return -ENOMEM; -- cgit v1.2.3 From fecc5cfcd55f7aacc483726c405a951bd6aaaf2e Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Thu, 14 May 2020 23:10:38 +0100 Subject: arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST config option PCIE_RCAR internally selects PCIE_RCAR_HOST which builds the same driver. So this patch renames CONFIG_PCIE_RCAR to CONFIG_PCIE_RCAR_HOST so that PCIE_RCAR can be safely dropped from Kconfig file. Signed-off-by: Lad Prabhakar Reviewed-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1589494238-2933-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/configs/defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 883e8bace3ed..2ca7ba69c318 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -194,7 +194,7 @@ CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_ACPI=y CONFIG_PCI_AARDVARK=y CONFIG_PCI_TEGRA=y -CONFIG_PCIE_RCAR=y +CONFIG_PCIE_RCAR_HOST=y CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_XGENE=y CONFIG_PCIE_ALTERA=y -- cgit v1.2.3 From ebd4050c6144b38098d8eed34df461e5e3fa82a9 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Thu, 9 Jul 2020 14:57:06 -0500 Subject: mmc: sdhci-of-aspeed: Fix clock divider calculation When calculating the clock divider, start dividing at 2 instead of 1. The divider is divided by two at the end of the calculation, so starting at 1 may result in a divider of 0, which shouldn't happen. Signed-off-by: Eddie James Reviewed-by: Andrew Jeffery Acked-by: Joel Stanley Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20200709195706.12741-3-eajames@linux.ibm.com Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-of-aspeed.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c index 56912e30c47e..a1bcc0f4ba9e 100644 --- a/drivers/mmc/host/sdhci-of-aspeed.c +++ b/drivers/mmc/host/sdhci-of-aspeed.c @@ -68,7 +68,7 @@ static void aspeed_sdhci_set_clock(struct sdhci_host *host, unsigned int clock) if (WARN_ON(clock > host->max_clk)) clock = host->max_clk; - for (div = 1; div < 256; div *= 2) { + for (div = 2; div < 256; div *= 2) { if ((parent / div) <= clock) break; } -- cgit v1.2.3 From 7c116db24d944ff04a67c8bd89cb32c5cd0894ff Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 9 Jul 2020 21:48:41 +0100 Subject: efi/libstub/arm64: Retain 2MB kernel Image alignment if !KASLR Since commit 82046702e288 ("efi/libstub/arm64: Replace 'preferred' offset with alignment check"), loading a relocatable arm64 kernel at a physical address which is not 2MB aligned and subsequently booting with EFI will leave the Image in-place, relying on the kernel to relocate itself early during boot. In conjunction with commit dd4bc6076587 ("arm64: warn on incorrect placement of the kernel by the bootloader"), which enables CONFIG_RELOCATABLE by default, this effectively means that entering an arm64 kernel loaded at an alignment smaller than 2MB with EFI (e.g. using QEMU) will result in silent relocation at runtime. Unfortunately, this has a subtle but confusing affect for developers trying to inspect the PC value during a crash and comparing it to the symbol addresses in vmlinux using tools such as 'nm' or 'addr2line'; all text addresses will be displaced by a sub-2MB offset, resulting in the wrong symbol being identified in many cases. Passing "nokaslr" on the command line or disabling "CONFIG_RANDOMIZE_BASE" does not help, since the EFI stub only copies the kernel Image to a 2MB boundary if it is not relocatable. Adjust the EFI stub for arm64 so that the minimum Image alignment is 2MB unless KASLR is in use. Cc: Mark Rutland Cc: Catalin Marinas Cc: Marc Zyngier Cc: David Brazdil Acked-by: Ard Biesheuvel Signed-off-by: Will Deacon --- drivers/firmware/efi/libstub/arm64-stub.c | 25 ++++++++++++++----------- drivers/firmware/efi/libstub/efi-stub-helper.c | 2 +- 2 files changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/firmware/efi/libstub/arm64-stub.c b/drivers/firmware/efi/libstub/arm64-stub.c index 7f6a57dec513..e5bfac79e5ac 100644 --- a/drivers/firmware/efi/libstub/arm64-stub.c +++ b/drivers/firmware/efi/libstub/arm64-stub.c @@ -35,13 +35,16 @@ efi_status_t check_platform_features(void) } /* - * Relocatable kernels can fix up the misalignment with respect to - * MIN_KIMG_ALIGN, so they only require a minimum alignment of EFI_KIMG_ALIGN - * (which accounts for the alignment of statically allocated objects such as - * the swapper stack.) + * Although relocatable kernels can fix up the misalignment with respect to + * MIN_KIMG_ALIGN, the resulting virtual text addresses are subtly out of + * sync with those recorded in the vmlinux when kaslr is disabled but the + * image required relocation anyway. Therefore retain 2M alignment unless + * KASLR is in use. */ -static const u64 min_kimg_align = IS_ENABLED(CONFIG_RELOCATABLE) ? EFI_KIMG_ALIGN - : MIN_KIMG_ALIGN; +static u64 min_kimg_align(void) +{ + return efi_nokaslr ? MIN_KIMG_ALIGN : EFI_KIMG_ALIGN; +} efi_status_t handle_kernel_image(unsigned long *image_addr, unsigned long *image_size, @@ -74,21 +77,21 @@ efi_status_t handle_kernel_image(unsigned long *image_addr, kernel_size = _edata - _text; kernel_memsize = kernel_size + (_end - _edata); - *reserve_size = kernel_memsize + TEXT_OFFSET % min_kimg_align; + *reserve_size = kernel_memsize + TEXT_OFFSET % min_kimg_align(); if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && phys_seed != 0) { /* * If KASLR is enabled, and we have some randomness available, * locate the kernel at a randomized offset in physical memory. */ - status = efi_random_alloc(*reserve_size, min_kimg_align, + status = efi_random_alloc(*reserve_size, min_kimg_align(), reserve_addr, phys_seed); } else { status = EFI_OUT_OF_RESOURCES; } if (status != EFI_SUCCESS) { - if (IS_ALIGNED((u64)_text - TEXT_OFFSET, min_kimg_align)) { + if (IS_ALIGNED((u64)_text - TEXT_OFFSET, min_kimg_align())) { /* * Just execute from wherever we were loaded by the * UEFI PE/COFF loader if the alignment is suitable. @@ -99,7 +102,7 @@ efi_status_t handle_kernel_image(unsigned long *image_addr, } status = efi_allocate_pages_aligned(*reserve_size, reserve_addr, - ULONG_MAX, min_kimg_align); + ULONG_MAX, min_kimg_align()); if (status != EFI_SUCCESS) { efi_err("Failed to relocate kernel\n"); @@ -108,7 +111,7 @@ efi_status_t handle_kernel_image(unsigned long *image_addr, } } - *image_addr = *reserve_addr + TEXT_OFFSET % min_kimg_align; + *image_addr = *reserve_addr + TEXT_OFFSET % min_kimg_align(); memcpy((void *)*image_addr, _text, kernel_size); return EFI_SUCCESS; diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c index 89f075275300..7038287a4608 100644 --- a/drivers/firmware/efi/libstub/efi-stub-helper.c +++ b/drivers/firmware/efi/libstub/efi-stub-helper.c @@ -19,7 +19,7 @@ #include "efistub.h" bool efi_nochunk; -bool efi_nokaslr; +bool efi_nokaslr = !IS_ENABLED(CONFIG_RANDOMIZE_BASE); bool efi_noinitrd; int efi_loglevel = CONSOLE_LOGLEVEL_DEFAULT; bool efi_novamap; -- cgit v1.2.3 From 85bfd71bc34e20d9fadb745131f6314c36d0f75b Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sat, 27 Jun 2020 12:35:04 -0400 Subject: xprtrdma: Fix double-free in rpcrdma_ep_create() In the error paths, there's no need to call kfree(ep) after calling rpcrdma_ep_put(ep). Fixes: e28ce90083f0 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt") Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker --- net/sunrpc/xprtrdma/verbs.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c index 2198c8ec8dff..e4c0df7c7d78 100644 --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -406,8 +406,8 @@ static int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt) id = rpcrdma_create_id(r_xprt, ep); if (IS_ERR(id)) { - rc = PTR_ERR(id); - goto out_free; + kfree(ep); + return PTR_ERR(id); } __module_get(THIS_MODULE); device = id->device; @@ -506,9 +506,6 @@ static int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt) out_destroy: rpcrdma_ep_put(ep); rdma_destroy_id(id); -out_free: - kfree(ep); - r_xprt->rx_ep = NULL; return rc; } -- cgit v1.2.3 From 4cf44be6f1e86da302085bf3e1dc2c86f3cdaaaa Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sat, 27 Jun 2020 12:35:09 -0400 Subject: xprtrdma: Fix recursion into rpcrdma_xprt_disconnect() Both Dan and I have observed two processes invoking rpcrdma_xprt_disconnect() concurrently. In my case: 1. The connect worker invokes rpcrdma_xprt_disconnect(), which drains the QP and waits for the final completion 2. This causes the newly posted Receive to flush and invoke xprt_force_disconnect() 3. xprt_force_disconnect() sets CLOSE_WAIT and wakes up the RPC task that is holding the transport lock 4. The RPC task invokes xprt_connect(), which calls ->ops->close 5. xprt_rdma_close() invokes rpcrdma_xprt_disconnect(), which tries to destroy the QP. Deadlock. To prevent xprt_force_disconnect() from waking anything, handle the clean up after a failed connection attempt in the xprt's sndtask. The retry loop is removed from rpcrdma_xprt_connect() to ensure that the newly allocated ep and id are properly released before a REJECTED connection attempt can be retried. Reported-by: Dan Aloni Fixes: e28ce90083f0 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt") Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker --- net/sunrpc/xprtrdma/transport.c | 5 +++++ net/sunrpc/xprtrdma/verbs.c | 10 ++-------- 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c index 14165b673b20..053c8ab1265a 100644 --- a/net/sunrpc/xprtrdma/transport.c +++ b/net/sunrpc/xprtrdma/transport.c @@ -249,6 +249,11 @@ xprt_rdma_connect_worker(struct work_struct *work) xprt->stat.connect_start; xprt_set_connected(xprt); rc = -EAGAIN; + } else { + /* Force a call to xprt_rdma_close to clean up */ + spin_lock(&xprt->transport_lock); + set_bit(XPRT_CLOSE_WAIT, &xprt->state); + spin_unlock(&xprt->transport_lock); } xprt_wake_pending_tasks(xprt, rc); } diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c index e4c0df7c7d78..641a3ca0fc8f 100644 --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -290,7 +290,7 @@ rpcrdma_cm_event_handler(struct rdma_cm_id *id, struct rdma_cm_event *event) sap, rdma_reject_msg(id, event->status)); ep->re_connect_status = -ECONNREFUSED; if (event->status == IB_CM_REJ_STALE_CONN) - ep->re_connect_status = -EAGAIN; + ep->re_connect_status = -ENOTCONN; goto disconnected; case RDMA_CM_EVENT_DISCONNECTED: ep->re_connect_status = -ECONNABORTED; @@ -521,8 +521,6 @@ int rpcrdma_xprt_connect(struct rpcrdma_xprt *r_xprt) struct rpcrdma_ep *ep; int rc; -retry: - rpcrdma_xprt_disconnect(r_xprt); rc = rpcrdma_ep_create(r_xprt); if (rc) return rc; @@ -550,17 +548,13 @@ retry: wait_event_interruptible(ep->re_connect_wait, ep->re_connect_status != 0); if (ep->re_connect_status <= 0) { - if (ep->re_connect_status == -EAGAIN) - goto retry; rc = ep->re_connect_status; goto out; } rc = rpcrdma_reqs_setup(r_xprt); - if (rc) { - rpcrdma_xprt_disconnect(r_xprt); + if (rc) goto out; - } rpcrdma_mrs_create(r_xprt); out: -- cgit v1.2.3 From dda9a951dd6dd6073bbaf2c8d3119da2f8fe2d5b Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sat, 27 Jun 2020 12:35:15 -0400 Subject: xprtrdma: Fix return code from rpcrdma_xprt_connect() I noticed that when rpcrdma_xprt_connect() returns -ENOMEM, instead of retrying the connect, the RPC client kills the RPC task that requested the connection. We want a retry here. Fixes: cb586decbb88 ("xprtrdma: Make sendctx queue lifetime the same as connection lifetime") Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker --- net/sunrpc/xprtrdma/verbs.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c index 641a3ca0fc8f..13d671dccfd8 100644 --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -400,7 +400,7 @@ static int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt) ep = kzalloc(sizeof(*ep), GFP_NOFS); if (!ep) - return -EAGAIN; + return -ENOTCONN; ep->re_xprt = &r_xprt->rx_xprt; kref_init(&ep->re_kref); @@ -535,10 +535,6 @@ int rpcrdma_xprt_connect(struct rpcrdma_xprt *r_xprt) rpcrdma_ep_get(ep); rpcrdma_post_recvs(r_xprt, true); - rc = rpcrdma_sendctxs_create(r_xprt); - if (rc) - goto out; - rc = rdma_connect(ep->re_id, &ep->re_remote_cma); if (rc) goto out; @@ -552,9 +548,17 @@ int rpcrdma_xprt_connect(struct rpcrdma_xprt *r_xprt) goto out; } + rc = rpcrdma_sendctxs_create(r_xprt); + if (rc) { + rc = -ENOTCONN; + goto out; + } + rc = rpcrdma_reqs_setup(r_xprt); - if (rc) + if (rc) { + rc = -ENOTCONN; goto out; + } rpcrdma_mrs_create(r_xprt); out: -- cgit v1.2.3 From af667527b0e34912d2cb3586d585f66db4e4f486 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sat, 27 Jun 2020 12:35:20 -0400 Subject: xprtrdma: Fix handling of connect errors Ensure that the connect worker is awoken if an attempt to establish a connection is unsuccessful. Otherwise the worker waits forever and the transport workload hangs. Connect errors should not attempt to destroy the ep, since the connect worker continues to use it after the handler runs, so these errors are now handled independently of DISCONNECTED events. Reported-by: Dan Aloni Fixes: e28ce90083f0 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt") Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker --- net/sunrpc/xprtrdma/verbs.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c index 13d671dccfd8..75c646743df3 100644 --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -281,17 +281,19 @@ rpcrdma_cm_event_handler(struct rdma_cm_id *id, struct rdma_cm_event *event) break; case RDMA_CM_EVENT_CONNECT_ERROR: ep->re_connect_status = -ENOTCONN; - goto disconnected; + goto wake_connect_worker; case RDMA_CM_EVENT_UNREACHABLE: ep->re_connect_status = -ENETUNREACH; - goto disconnected; + goto wake_connect_worker; case RDMA_CM_EVENT_REJECTED: dprintk("rpcrdma: connection to %pISpc rejected: %s\n", sap, rdma_reject_msg(id, event->status)); ep->re_connect_status = -ECONNREFUSED; if (event->status == IB_CM_REJ_STALE_CONN) ep->re_connect_status = -ENOTCONN; - goto disconnected; +wake_connect_worker: + wake_up_all(&ep->re_connect_wait); + return 0; case RDMA_CM_EVENT_DISCONNECTED: ep->re_connect_status = -ECONNABORTED; disconnected: -- cgit v1.2.3 From 913fadc5b105c3619d9e8d0fe8899ff1593cc737 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Wed, 8 Jul 2020 10:33:40 -0400 Subject: NFS: Fix interrupted slots by sending a solo SEQUENCE operation We used to do this before 3453d5708b33, but this was changed to better handle the NFS4ERR_SEQ_MISORDERED error code. This commit fixed the slot re-use case when the server doesn't receive the interrupted operation, but if the server does receive the operation then it could still end up replying to the client with mis-matched operations from the reply cache. We can fix this by sending a SEQUENCE to the server while recovering from a SEQ_MISORDERED error when we detect that we are in an interrupted slot situation. Fixes: 3453d5708b33 (NFSv4.1: Avoid false retries when RPC calls are interrupted) Signed-off-by: Anna Schumaker --- fs/nfs/nfs4proc.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index e32717fd1169..2e2dac29a9e9 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -774,6 +774,14 @@ static void nfs4_slot_sequence_acked(struct nfs4_slot *slot, slot->seq_nr_last_acked = seqnr; } +static void nfs4_probe_sequence(struct nfs_client *client, const struct cred *cred, + struct nfs4_slot *slot) +{ + struct rpc_task *task = _nfs41_proc_sequence(client, cred, slot, true); + if (!IS_ERR(task)) + rpc_put_task_async(task); +} + static int nfs41_sequence_process(struct rpc_task *task, struct nfs4_sequence_res *res) { @@ -790,6 +798,7 @@ static int nfs41_sequence_process(struct rpc_task *task, goto out; session = slot->table->session; + clp = session->clp; trace_nfs4_sequence_done(session, res); @@ -804,7 +813,6 @@ static int nfs41_sequence_process(struct rpc_task *task, nfs4_slot_sequence_acked(slot, slot->seq_nr); /* Update the slot's sequence and clientid lease timer */ slot->seq_done = 1; - clp = session->clp; do_renew_lease(clp, res->sr_timestamp); /* Check sequence flags */ nfs41_handle_sequence_flag_errors(clp, res->sr_status_flags, @@ -852,10 +860,18 @@ static int nfs41_sequence_process(struct rpc_task *task, /* * Were one or more calls using this slot interrupted? * If the server never received the request, then our - * transmitted slot sequence number may be too high. + * transmitted slot sequence number may be too high. However, + * if the server did receive the request then it might + * accidentally give us a reply with a mismatched operation. + * We can sort this out by sending a lone sequence operation + * to the server on the same slot. */ if ((s32)(slot->seq_nr - slot->seq_nr_last_acked) > 1) { slot->seq_nr--; + if (task->tk_msg.rpc_proc != &nfs4_procedures[NFSPROC4_CLNT_SEQUENCE]) { + nfs4_probe_sequence(clp, task->tk_msg.rpc_cred, slot); + res->sr_slot = NULL; + } goto retry_nowait; } /* -- cgit v1.2.3 From 39a188b88332545073b8e07633f5e3298e066b61 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 13 Jul 2020 15:58:38 +0200 Subject: cpufreq: intel_pstate: Fix active mode setting from command line If intel_pstate starts in the passive mode by default (that happens when the processor in the system doesn't support HWP), passing intel_pstate=active in the kernel command line doesn't work, so fix that. Fixes: 33aa46f252c7 ("cpufreq: intel_pstate: Use passive mode by default without HWP") Reported-by: Doug Smythies Signed-off-by: Rafael J. Wysocki Acked-by: Doug Smythies --- drivers/cpufreq/intel_pstate.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index e771e8b4f99f..7e0f7880b21a 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -2464,7 +2464,7 @@ static struct cpufreq_driver intel_cpufreq = { .name = "intel_cpufreq", }; -static struct cpufreq_driver *default_driver = &intel_pstate; +static struct cpufreq_driver *default_driver; static void intel_pstate_driver_cleanup(void) { @@ -2758,6 +2758,7 @@ static int __init intel_pstate_init(void) hwp_active++; hwp_mode_bdw = id->driver_data; intel_pstate.attr = hwp_cpufreq_attrs; + default_driver = &intel_pstate; goto hwp_cpu_matched; } } else { @@ -2775,7 +2776,8 @@ static int __init intel_pstate_init(void) return -ENODEV; } /* Without HWP start in the passive mode. */ - default_driver = &intel_cpufreq; + if (!default_driver) + default_driver = &intel_cpufreq; hwp_cpu_matched: /* @@ -2820,6 +2822,8 @@ static int __init intel_pstate_setup(char *str) if (!strcmp(str, "disable")) { no_load = 1; + } else if (!strcmp(str, "active")) { + default_driver = &intel_pstate; } else if (!strcmp(str, "passive")) { default_driver = &intel_cpufreq; no_hwp = 1; -- cgit v1.2.3 From f81fdd0c4ab7ac2c57302283309bf776557d35ff Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 13 Jul 2020 11:37:39 -0700 Subject: mm: document warning in move_normal_pmd() and make it warn only once Naresh Kamboju reported that the LTP tests can cause warnings on i386 going back all the way to v5.0, and bisected it to commit 2c91bd4a4e2e ("mm: speed up mremap by 20x on large regions"). The warning in move_normal_pmd() is actually mostly correct, but we have a very unusual special case at process creation time, when we may move the stack down with an overlapping mode (kind of like a "memmove()" except using the page tables). And when you have just the right condition of "move a large initial stack by the right alignment in the end, but with the early part of the move being only page-aligned", we'll be in a situation where we're trying to move a normal PMD entry on top of an already existing - but now empty - PMD entry. The warning is still worth having, in case it ever triggers other cases, and perhaps as a reminder that we could do the stack move case more efficiently (although it's clearly rare enough that it probably doesn't matter). But make it do WARN_ON_ONCE(), so that you can't flood the logs with it. And add a *big* comment above it to explain and remind us what's going on, because it took some figuring out to see how this could trigger. Kudos to Joel Fernandes for debugging this. Reported-by: Naresh Kamboju Debugged-and-acked-by: Joel Fernandes Cc: Arnd Bergmann Cc: Kirill A. Shutemov Signed-off-by: Linus Torvalds --- mm/mremap.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/mm/mremap.c b/mm/mremap.c index 5dd572d57ca9..6b153dc05fe4 100644 --- a/mm/mremap.c +++ b/mm/mremap.c @@ -206,9 +206,28 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr, /* * The destination pmd shouldn't be established, free_pgtables() - * should have release it. + * should have released it. + * + * However, there's a case during execve() where we use mremap + * to move the initial stack, and in that case the target area + * may overlap the source area (always moving down). + * + * If everything is PMD-aligned, that works fine, as moving + * each pmd down will clear the source pmd. But if we first + * have a few 4kB-only pages that get moved down, and then + * hit the "now the rest is PMD-aligned, let's do everything + * one pmd at a time", we will still have the old (now empty + * of any 4kB pages, but still there) PMD in the page table + * tree. + * + * Warn on it once - because we really should try to figure + * out how to do this better - but then say "I won't move + * this pmd". + * + * One alternative might be to just unmap the target pmd at + * this point, and verify that it really is empty. We'll see. */ - if (WARN_ON(!pmd_none(*new_pmd))) + if (WARN_ON_ONCE(!pmd_none(*new_pmd))) return false; /* -- cgit v1.2.3 From e0484010ec05191a8edf980413fc92f28050c1cc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 13 Jul 2020 13:05:13 +0200 Subject: usb: hso: Fix debug compile warning on sparc32 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On sparc32, tcflag_t is "unsigned long", unlike on all other architectures, where it is "unsigned int": drivers/net/usb/hso.c: In function ‘hso_serial_set_termios’: include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 4 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=] drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’ hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n", ^~~~~~~ include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 5 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=] drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’ hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n", ^~~~~~~ As "unsigned long" is 32-bit on sparc32, fix this by casting all tcflag_t parameters to "unsigned int". While at it, use "%u" to format unsigned numbers. Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index bb8c34d746ab..5f123a8cf68e 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1390,8 +1390,9 @@ static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old) unsigned long flags; if (old) - hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n", - tty->termios.c_cflag, old->c_cflag); + hso_dbg(0x16, "Termios called with: cflags new[%u] - old[%u]\n", + (unsigned int)tty->termios.c_cflag, + (unsigned int)old->c_cflag); /* the actual setup */ spin_lock_irqsave(&serial->serial_lock, flags); -- cgit v1.2.3 From 46ef5b89ec0ecf290d74c4aee844f063933c4da4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 Jul 2020 23:59:50 +0800 Subject: ip6_gre: fix null-ptr-deref in ip6gre_init_net() KASAN report null-ptr-deref error when register_netdev() failed: KASAN: null-ptr-deref in range [0x00000000000003c0-0x00000000000003c7] CPU: 2 PID: 422 Comm: ip Not tainted 5.8.0-rc4+ #12 Call Trace: ip6gre_init_net+0x4ab/0x580 ? ip6gre_tunnel_uninit+0x3f0/0x3f0 ops_init+0xa8/0x3c0 setup_net+0x2de/0x7e0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? ops_init+0x3c0/0x3c0 ? kasan_unpoison_shadow+0x33/0x40 ? __kasan_kmalloc.constprop.0+0xc2/0xd0 copy_net_ns+0x27d/0x530 create_new_namespaces+0x382/0xa30 unshare_nsproxy_namespaces+0xa1/0x1d0 ksys_unshare+0x39c/0x780 ? walk_process_tree+0x2a0/0x2a0 ? trace_hardirqs_on+0x4a/0x1b0 ? _raw_spin_unlock_irq+0x1f/0x30 ? syscall_trace_enter+0x1a7/0x330 ? do_syscall_64+0x1c/0xa0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x56/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ip6gre_tunnel_uninit() has set 'ign->fb_tunnel_dev' to NULL, later access to ign->fb_tunnel_dev cause null-ptr-deref. Fix it by saving 'ign->fb_tunnel_dev' to local variable ndev. Fixes: dafabb6590cb ("ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()") Reported-by: Hulk Robot Signed-off-by: Wei Yongjun Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index 6532bde82b40..3a57fb9ce049 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -1562,17 +1562,18 @@ static void ip6gre_destroy_tunnels(struct net *net, struct list_head *head) static int __net_init ip6gre_init_net(struct net *net) { struct ip6gre_net *ign = net_generic(net, ip6gre_net_id); + struct net_device *ndev; int err; if (!net_has_fallback_tunnels(net)) return 0; - ign->fb_tunnel_dev = alloc_netdev(sizeof(struct ip6_tnl), "ip6gre0", - NET_NAME_UNKNOWN, - ip6gre_tunnel_setup); - if (!ign->fb_tunnel_dev) { + ndev = alloc_netdev(sizeof(struct ip6_tnl), "ip6gre0", + NET_NAME_UNKNOWN, ip6gre_tunnel_setup); + if (!ndev) { err = -ENOMEM; goto err_alloc_dev; } + ign->fb_tunnel_dev = ndev; dev_net_set(ign->fb_tunnel_dev, net); /* FB netdevice is special: we have one, and only one per netns. * Allowing to move it to another netns is clearly unsafe. @@ -1592,7 +1593,7 @@ static int __net_init ip6gre_init_net(struct net *net) return 0; err_reg_dev: - free_netdev(ign->fb_tunnel_dev); + free_netdev(ndev); err_alloc_dev: return err; } -- cgit v1.2.3 From 1f054fd26e29784d373c3d29c348ee48f1c41fb2 Mon Sep 17 00:00:00 2001 From: Roland Scheidegger Date: Thu, 9 Jul 2020 18:54:14 +0200 Subject: drm/vmwgfx: fix update of display surface when resolution changes The assignment of metadata overwrote the new display resolution values, hence we'd miss the size actually changed and wouldn't redefine the surface. This would then lead to command buffer error when trying to update the screen target (due to the size mismatch), and result in a VM with black screen. Fixes: 504901dbb0b5 ("drm/vmwgfx: Refactor surface_define to use vmw_surface_metadata") Reviewed-by: Charmaine Lee Signed-off-by: Roland Scheidegger Cc: stable@vger.kernel.org --- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c index 9ffa9c75a5da..16b385629688 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c @@ -1069,10 +1069,6 @@ vmw_stdu_primary_plane_prepare_fb(struct drm_plane *plane, if (new_content_type != SAME_AS_DISPLAY) { struct vmw_surface_metadata metadata = {0}; - metadata.base_size.width = hdisplay; - metadata.base_size.height = vdisplay; - metadata.base_size.depth = 1; - /* * If content buffer is a buffer object, then we have to * construct surface info @@ -1104,6 +1100,10 @@ vmw_stdu_primary_plane_prepare_fb(struct drm_plane *plane, metadata = new_vfbs->surface->metadata; } + metadata.base_size.width = hdisplay; + metadata.base_size.height = vdisplay; + metadata.base_size.depth = 1; + if (vps->surf) { struct drm_vmw_size cur_base_size = vps->surf->metadata.base_size; -- cgit v1.2.3 From b710d27bf72068b15b2f0305d825988183e2ff28 Mon Sep 17 00:00:00 2001 From: Satheesh Rajendran Date: Fri, 19 Jun 2020 12:31:13 +0530 Subject: powerpc/pseries/svm: Fix incorrect check for shared_lppaca_size Early secure guest boot hits the below crash while booting with vcpus numbers aligned with page boundary for PAGE size of 64k and LPPACA size of 1k i.e 64, 128 etc. Partition configured for 64 cpus. CPU maps initialized for 1 thread per core ------------[ cut here ]------------ kernel BUG at arch/powerpc/kernel/paca.c:89! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries This is due to the BUG_ON() for shared_lppaca_total_size equal to shared_lppaca_size. Instead the code should only BUG_ON() if we have exceeded the total_size, which indicates we've overflowed the array. Fixes: bd104e6db6f0 ("powerpc/pseries/svm: Use shared memory for LPPACA structures") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Satheesh Rajendran Reviewed-by: Laurent Dufour Reviewed-by: Thiago Jung Bauermann [mpe: Reword change log to clarify we're fixing not removing the check] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200619070113.16696-1-sathnaga@linux.vnet.ibm.com --- arch/powerpc/kernel/paca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 2168372b792d..74da65aacbc9 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -87,7 +87,7 @@ static void *__init alloc_shared_lppaca(unsigned long size, unsigned long align, * This is very early in boot, so no harm done if the kernel crashes at * this point. */ - BUG_ON(shared_lppaca_size >= shared_lppaca_total_size); + BUG_ON(shared_lppaca_size > shared_lppaca_total_size); return ptr; } -- cgit v1.2.3 From 69a6487ac0ea1bbc8d8b654cb5a4541f2d922f91 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Jul 2020 14:45:41 +0200 Subject: fuse: move rb_erase() before tree_insert() In fuse_writepage_end() the old writepages entry needs to be removed from the rbtree before inserting the new one, otherwise tree_insert() would fail. This is a very rare codepath and no reproducer exists. Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index e573b0cd2737..7247c02adb32 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1586,7 +1586,6 @@ static void fuse_writepage_finish(struct fuse_conn *fc, struct backing_dev_info *bdi = inode_to_bdi(inode); int i; - rb_erase(&wpa->writepages_entry, &fi->writepages); for (i = 0; i < ap->num_pages; i++) { dec_wb_stat(&bdi->wb, WB_WRITEBACK); dec_node_page_state(ap->pages[i], NR_WRITEBACK_TEMP); @@ -1637,6 +1636,7 @@ __acquires(fi->lock) out_free: fi->writectr--; + rb_erase(&wpa->writepages_entry, &fi->writepages); fuse_writepage_finish(fc, wpa); spin_unlock(&fi->lock); @@ -1714,6 +1714,7 @@ static void fuse_writepage_end(struct fuse_conn *fc, struct fuse_args *args, mapping_set_error(inode->i_mapping, error); spin_lock(&fi->lock); + rb_erase(&wpa->writepages_entry, &fi->writepages); while (wpa->next) { struct fuse_conn *fc = get_fuse_conn(inode); struct fuse_write_in *inarg = &wpa->ia.write.in; -- cgit v1.2.3 From c146024ec44c2946de7c6c45ddd3402abcab17f9 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Jul 2020 14:45:41 +0200 Subject: fuse: fix warning in tree_insert() and clean up writepage insertion fuse_writepages_fill() calls tree_insert() with ap->num_pages = 0 which triggers the following warning: WARNING: CPU: 1 PID: 17211 at fs/fuse/file.c:1728 tree_insert+0xab/0xc0 [fuse] RIP: 0010:tree_insert+0xab/0xc0 [fuse] Call Trace: fuse_writepages_fill+0x5da/0x6a0 [fuse] write_cache_pages+0x171/0x470 fuse_writepages+0x8a/0x100 [fuse] do_writepages+0x43/0xe0 Fix up the warning and clean up the code around rb-tree insertion: - Rename tree_insert() to fuse_insert_writeback() and make it return the conflicting entry in case of failure - Re-add tree_insert() as a wrapper around fuse_insert_writeback() - Rename fuse_writepage_in_flight() to fuse_writepage_add() and reverse the meaning of the return value to mean + "true" in case the writepage entry was successfully added + "false" in case it was in-fligt queued on an existing writepage entry's auxiliary list or the existing writepage entry's temporary page updated Switch from fuse_find_writeback() + tree_insert() to fuse_insert_writeback() - Move setting orig_pages to before inserting/updating the entry; this may result in the orig_pages value being discarded later in case of an in-flight request - In case of a new writepage entry use fuse_writepage_add() unconditionally, only set data->wpa if the entry was added. Fixes: 6b2fb79963fb ("fuse: optimize writepages search") Reported-by: kernel test robot Original-path-by: Vasily Averin Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 62 ++++++++++++++++++++++++++++------------------------------ 1 file changed, 30 insertions(+), 32 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 7247c02adb32..63d52fed3381 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1674,7 +1674,8 @@ __acquires(fi->lock) } } -static void tree_insert(struct rb_root *root, struct fuse_writepage_args *wpa) +static struct fuse_writepage_args *fuse_insert_writeback(struct rb_root *root, + struct fuse_writepage_args *wpa) { pgoff_t idx_from = wpa->ia.write.in.offset >> PAGE_SHIFT; pgoff_t idx_to = idx_from + wpa->ia.ap.num_pages - 1; @@ -1697,11 +1698,17 @@ static void tree_insert(struct rb_root *root, struct fuse_writepage_args *wpa) else if (idx_to < curr_index) p = &(*p)->rb_left; else - return (void) WARN_ON(true); + return curr; } rb_link_node(&wpa->writepages_entry, parent, p); rb_insert_color(&wpa->writepages_entry, root); + return NULL; +} + +static void tree_insert(struct rb_root *root, struct fuse_writepage_args *wpa) +{ + WARN_ON(fuse_insert_writeback(root, wpa)); } static void fuse_writepage_end(struct fuse_conn *fc, struct fuse_args *args, @@ -1953,14 +1960,14 @@ static void fuse_writepages_send(struct fuse_fill_wb_data *data) } /* - * First recheck under fi->lock if the offending offset is still under - * writeback. If yes, then iterate auxiliary write requests, to see if there's + * Check under fi->lock if the page is under writeback, and insert it onto the + * rb_tree if not. Otherwise iterate auxiliary write requests, to see if there's * one already added for a page at this offset. If there's none, then insert * this new request onto the auxiliary list, otherwise reuse the existing one by - * copying the new page contents over to the old temporary page. + * swapping the new temp page with the old one. */ -static bool fuse_writepage_in_flight(struct fuse_writepage_args *new_wpa, - struct page *page) +static bool fuse_writepage_add(struct fuse_writepage_args *new_wpa, + struct page *page) { struct fuse_inode *fi = get_fuse_inode(new_wpa->inode); struct fuse_writepage_args *tmp; @@ -1968,17 +1975,15 @@ static bool fuse_writepage_in_flight(struct fuse_writepage_args *new_wpa, struct fuse_args_pages *new_ap = &new_wpa->ia.ap; WARN_ON(new_ap->num_pages != 0); + new_ap->num_pages = 1; spin_lock(&fi->lock); - rb_erase(&new_wpa->writepages_entry, &fi->writepages); - old_wpa = fuse_find_writeback(fi, page->index, page->index); + old_wpa = fuse_insert_writeback(&fi->writepages, new_wpa); if (!old_wpa) { - tree_insert(&fi->writepages, new_wpa); spin_unlock(&fi->lock); - return false; + return true; } - new_ap->num_pages = 1; for (tmp = old_wpa->next; tmp; tmp = tmp->next) { pgoff_t curr_index; @@ -2007,7 +2012,7 @@ static bool fuse_writepage_in_flight(struct fuse_writepage_args *new_wpa, fuse_writepage_free(new_wpa); } - return true; + return false; } static int fuse_writepages_fill(struct page *page, @@ -2086,12 +2091,6 @@ static int fuse_writepages_fill(struct page *page, ap->args.end = fuse_writepage_end; ap->num_pages = 0; wpa->inode = inode; - - spin_lock(&fi->lock); - tree_insert(&fi->writepages, wpa); - spin_unlock(&fi->lock); - - data->wpa = wpa; } set_page_writeback(page); @@ -2099,26 +2098,25 @@ static int fuse_writepages_fill(struct page *page, ap->pages[ap->num_pages] = tmp_page; ap->descs[ap->num_pages].offset = 0; ap->descs[ap->num_pages].length = PAGE_SIZE; + data->orig_pages[ap->num_pages] = page; inc_wb_stat(&inode_to_bdi(inode)->wb, WB_WRITEBACK); inc_node_page_state(tmp_page, NR_WRITEBACK_TEMP); err = 0; - if (is_writeback && fuse_writepage_in_flight(wpa, page)) { + if (data->wpa) { + /* + * Protected by fi->lock against concurrent access by + * fuse_page_is_writeback(). + */ + spin_lock(&fi->lock); + ap->num_pages++; + spin_unlock(&fi->lock); + } else if (fuse_writepage_add(wpa, page)) { + data->wpa = wpa; + } else { end_page_writeback(page); - data->wpa = NULL; - goto out_unlock; } - data->orig_pages[ap->num_pages] = page; - - /* - * Protected by fi->lock against concurrent access by - * fuse_page_is_writeback(). - */ - spin_lock(&fi->lock); - ap->num_pages++; - spin_unlock(&fi->lock); - out_unlock: unlock_page(page); -- cgit v1.2.3 From 0189a2d367f49729622fdafaef5da73161591859 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Jul 2020 14:45:41 +0200 Subject: fuse: use ->reconfigure() instead of ->remount_fs() s_op->remount_fs() is only called from legacy_reconfigure(), which is not used after being converted to the new API. Convert to using ->reconfigure(). This restores the previous behavior of syncing the filesystem and rejecting MS_MANDLOCK on remount. Fixes: c30da2e981a7 ("fuse: convert to use the new mount API") Cc: # v5.4 Signed-off-by: Miklos Szeredi --- fs/fuse/inode.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 5b4aebf5821f..be39dff57c28 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -121,10 +121,12 @@ static void fuse_evict_inode(struct inode *inode) } } -static int fuse_remount_fs(struct super_block *sb, int *flags, char *data) +static int fuse_reconfigure(struct fs_context *fc) { + struct super_block *sb = fc->root->d_sb; + sync_filesystem(sb); - if (*flags & SB_MANDLOCK) + if (fc->sb_flags & SB_MANDLOCK) return -EINVAL; return 0; @@ -817,7 +819,6 @@ static const struct super_operations fuse_super_operations = { .evict_inode = fuse_evict_inode, .write_inode = fuse_write_inode, .drop_inode = generic_delete_inode, - .remount_fs = fuse_remount_fs, .put_super = fuse_put_super, .umount_begin = fuse_umount_begin, .statfs = fuse_statfs, @@ -1296,6 +1297,7 @@ static int fuse_get_tree(struct fs_context *fc) static const struct fs_context_operations fuse_context_ops = { .free = fuse_free_fc, .parse_param = fuse_parse_param, + .reconfigure = fuse_reconfigure, .get_tree = fuse_get_tree, }; -- cgit v1.2.3 From e8b20a474cf2c42698d1942f939ff2128819f151 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Jul 2020 14:45:41 +0200 Subject: fuse: ignore 'data' argument of mount(..., MS_REMOUNT) The command mount -o remount -o unknownoption /mnt/fuse succeeds on kernel versions prior to v5.4 and fails on kernel version at or after. This is because fuse_parse_param() rejects any unrecognised options in case of FS_CONTEXT_FOR_RECONFIGURE, just as for FS_CONTEXT_FOR_MOUNT. This causes a regression in case the fuse filesystem is in fstab, since remount sends all options found there to the kernel; even ones that are meant for the initial mount and are consumed by the userspace fuse server. Fix this by ignoring mount options, just as fuse_remount_fs() did prior to the conversion to the new API. Reported-by: Stefan Priebe Fixes: c30da2e981a7 ("fuse: convert to use the new mount API") Cc: # v5.4 Signed-off-by: Miklos Szeredi --- fs/fuse/inode.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index be39dff57c28..ba201bf5ffad 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -477,6 +477,13 @@ static int fuse_parse_param(struct fs_context *fc, struct fs_parameter *param) struct fuse_fs_context *ctx = fc->fs_private; int opt; + /* + * Ignore options coming from mount(MS_REMOUNT) for backward + * compatibility. + */ + if (fc->purpose == FS_CONTEXT_FOR_RECONFIGURE) + return 0; + opt = fs_parse(fc, fuse_fs_parameters, param, &result); if (opt < 0) return opt; -- cgit v1.2.3 From b330966f79fb4fdc49183f58db113303695a750f Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Jul 2020 14:45:41 +0200 Subject: fuse: reject options on reconfigure via fsconfig(2) Previous patch changed handling of remount/reconfigure to ignore all options, including those that are unknown to the fuse kernel fs. This was done for backward compatibility, but this likely only affects the old mount(2) API. The new fsconfig(2) based reconfiguration could possibly be improved. This would make the new API less of a drop in replacement for the old, OTOH this is a good chance to get rid of some weirdnesses in the old API. Several other behaviors might make sense: 1) unknown options are rejected, known options are ignored 2) unknown options are rejected, known options are rejected if the value is changed, allowed otherwise 3) all options are rejected Prior to the backward compatibility fix to ignore all options all known options were accepted (1), even if they change the value of a mount parameter; fuse_reconfigure() does not look at the config values set by fuse_parse_param(). To fix that we'd need to verify that the value provided is the same as set in the initial configuration (2). The major drawback is that this is much more complex than just rejecting all attempts at changing options (3); i.e. all options signify initial configuration values and don't make sense on reconfigure. This patch opts for (3) with the rationale that no mount options are reconfigurable in fuse. Signed-off-by: Miklos Szeredi --- fs/fuse/inode.c | 16 ++++++++++------ fs/namespace.c | 1 + include/linux/fs_context.h | 1 + 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index ba201bf5ffad..bba747520e9b 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -477,12 +477,16 @@ static int fuse_parse_param(struct fs_context *fc, struct fs_parameter *param) struct fuse_fs_context *ctx = fc->fs_private; int opt; - /* - * Ignore options coming from mount(MS_REMOUNT) for backward - * compatibility. - */ - if (fc->purpose == FS_CONTEXT_FOR_RECONFIGURE) - return 0; + if (fc->purpose == FS_CONTEXT_FOR_RECONFIGURE) { + /* + * Ignore options coming from mount(MS_REMOUNT) for backward + * compatibility. + */ + if (fc->oldapi) + return 0; + + return invalfc(fc, "No changes allowed in reconfigure"); + } opt = fs_parse(fc, fuse_fs_parameters, param, &result); if (opt < 0) diff --git a/fs/namespace.c b/fs/namespace.c index f30ed401cc6d..4a0f600a3328 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -2603,6 +2603,7 @@ static int do_remount(struct path *path, int ms_flags, int sb_flags, if (IS_ERR(fc)) return PTR_ERR(fc); + fc->oldapi = true; err = parse_monolithic_mount_data(fc, data); if (!err) { down_write(&sb->s_umount); diff --git a/include/linux/fs_context.h b/include/linux/fs_context.h index 5f24fcbfbfb4..37e1e8f7f08d 100644 --- a/include/linux/fs_context.h +++ b/include/linux/fs_context.h @@ -109,6 +109,7 @@ struct fs_context { enum fs_context_phase phase:8; /* The phase the context is in */ bool need_free:1; /* Need to call ops->free() */ bool global:1; /* Goes into &init_user_ns */ + bool oldapi:1; /* Coming from mount(2) */ }; struct fs_context_operations { -- cgit v1.2.3 From 6ddf3af93e32b996cfc30477ea1509960d4ba669 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Jul 2020 14:45:41 +0200 Subject: fuse: clean up condition for writepage sending fuse_writepages_fill uses following construction: if (wpa && ap->num_pages && (A || B || C)) { action; } else if (wpa && D) { if (E) { the same action; } } - ap->num_pages check is always true and can be removed - "if" and "else if" calls the same action and can be merged. Move checking A, B, C, D, E conditions to a helper, add comments. Original-patch-by: Vasily Averin Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 53 +++++++++++++++++++++++++++++++++++------------------ 1 file changed, 35 insertions(+), 18 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 63d52fed3381..a6a5aeff258d 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2015,6 +2015,40 @@ static bool fuse_writepage_add(struct fuse_writepage_args *new_wpa, return false; } +static bool fuse_writepage_need_send(struct fuse_conn *fc, struct page *page, + struct fuse_args_pages *ap, + struct fuse_fill_wb_data *data) +{ + WARN_ON(!ap->num_pages); + + /* + * Being under writeback is unlikely but possible. For example direct + * read to an mmaped fuse file will set the page dirty twice; once when + * the pages are faulted with get_user_pages(), and then after the read + * completed. + */ + if (fuse_page_is_writeback(data->inode, page->index)) + return true; + + /* Reached max pages */ + if (ap->num_pages == fc->max_pages) + return true; + + /* Reached max write bytes */ + if ((ap->num_pages + 1) * PAGE_SIZE > fc->max_write) + return true; + + /* Discontinuity */ + if (data->orig_pages[ap->num_pages - 1]->index + 1 != page->index) + return true; + + /* Need to grow the pages array? If so, did the expansion fail? */ + if (ap->num_pages == data->max_pages && !fuse_pages_realloc(data)) + return true; + + return false; +} + static int fuse_writepages_fill(struct page *page, struct writeback_control *wbc, void *_data) { @@ -2025,7 +2059,6 @@ static int fuse_writepages_fill(struct page *page, struct fuse_inode *fi = get_fuse_inode(inode); struct fuse_conn *fc = get_fuse_conn(inode); struct page *tmp_page; - bool is_writeback; int err; if (!data->ff) { @@ -2035,25 +2068,9 @@ static int fuse_writepages_fill(struct page *page, goto out_unlock; } - /* - * Being under writeback is unlikely but possible. For example direct - * read to an mmaped fuse file will set the page dirty twice; once when - * the pages are faulted with get_user_pages(), and then after the read - * completed. - */ - is_writeback = fuse_page_is_writeback(inode, page->index); - - if (wpa && ap->num_pages && - (is_writeback || ap->num_pages == fc->max_pages || - (ap->num_pages + 1) * PAGE_SIZE > fc->max_write || - data->orig_pages[ap->num_pages - 1]->index + 1 != page->index)) { + if (wpa && fuse_writepage_need_send(fc, page, ap, data)) { fuse_writepages_send(data); data->wpa = NULL; - } else if (wpa && ap->num_pages == data->max_pages) { - if (!fuse_pages_realloc(data)) { - fuse_writepages_send(data); - data->wpa = NULL; - } } err = -ENOMEM; -- cgit v1.2.3 From 7779b047a57f6824a43d0e1f70de2741b7426b9d Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Thu, 25 Jun 2020 12:39:51 +0300 Subject: fuse: don't ignore errors from fuse_writepages_fill() fuse_writepages() ignores some errors taken from fuse_writepages_fill() I believe it is a bug: if .writepages is called with WB_SYNC_ALL it should either guarantee that all data was successfully saved or return error. Fixes: 26d614df1da9 ("fuse: Implement writepages callback") Signed-off-by: Vasily Averin Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index a6a5aeff258d..9895ce2d7023 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2165,10 +2165,8 @@ static int fuse_writepages(struct address_space *mapping, err = write_cache_pages(mapping, wbc, fuse_writepages_fill, &data); if (data.wpa) { - /* Ignore errors if we can write at least one page */ WARN_ON(!data.wpa->ia.ap.num_pages); fuse_writepages_send(&data); - err = 0; } if (data.ff) fuse_file_put(data.ff, false, false); -- cgit v1.2.3 From 567f6a6eba0c09e5f502e0290e57651befa8aacb Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Tue, 14 Jul 2020 14:39:25 +0200 Subject: dma-direct: provide function to check physical memory area validity dma_coherent_ok() checks if a physical memory area fits a device's DMA constraints. Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Christoph Hellwig --- include/linux/dma-direct.h | 1 + kernel/dma/direct.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h index 5184735a0fe8..ab2e20cba951 100644 --- a/include/linux/dma-direct.h +++ b/include/linux/dma-direct.h @@ -69,6 +69,7 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size, u64 dma_direct_get_required_mask(struct device *dev); gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask, u64 *phys_mask); +bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size); void *dma_direct_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs); void dma_direct_free(struct device *dev, size_t size, void *cpu_addr, diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c index 95866b647581..67f060b86a73 100644 --- a/kernel/dma/direct.c +++ b/kernel/dma/direct.c @@ -70,7 +70,7 @@ gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask, return 0; } -static bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size) +bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size) { return phys_to_dma_direct(dev, phys) + size - 1 <= min_not_zero(dev->coherent_dma_mask, dev->bus_dma_limit); -- cgit v1.2.3 From 23e469be6239d9cf3d921fc3e38545491df56534 Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Tue, 14 Jul 2020 14:39:26 +0200 Subject: dma-pool: get rid of dma_in_atomic_pool() The function is only used once and can be simplified to a one-liner. Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Christoph Hellwig --- kernel/dma/pool.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/kernel/dma/pool.c b/kernel/dma/pool.c index 39ca26fa41b5..318035e093fb 100644 --- a/kernel/dma/pool.c +++ b/kernel/dma/pool.c @@ -217,15 +217,6 @@ static inline struct gen_pool *dev_to_pool(struct device *dev) return atomic_pool_kernel; } -static bool dma_in_atomic_pool(struct device *dev, void *start, size_t size) -{ - struct gen_pool *pool = dev_to_pool(dev); - - if (unlikely(!pool)) - return false; - return gen_pool_has_addr(pool, (unsigned long)start, size); -} - void *dma_alloc_from_pool(struct device *dev, size_t size, struct page **ret_page, gfp_t flags) { @@ -260,7 +251,7 @@ bool dma_free_from_pool(struct device *dev, void *start, size_t size) { struct gen_pool *pool = dev_to_pool(dev); - if (!dma_in_atomic_pool(dev, start, size)) + if (!pool || !gen_pool_has_addr(pool, (unsigned long)start, size)) return false; gen_pool_free(pool, (unsigned long)start, size); return true; -- cgit v1.2.3 From 48b6703858dd5526c82d8ff2dbac59acab3a9dda Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Tue, 14 Jul 2020 14:39:27 +0200 Subject: dma-pool: introduce dma_guess_pool() dma-pool's dev_to_pool() creates the false impression that there is a way to grantee a mapping between a device's DMA constraints and an atomic pool. It tuns out it's just a guess, and the device might need to use an atomic pool containing memory from a 'safer' (or lower) memory zone. To help mitigate this, introduce dma_guess_pool() which can be fed a device's DMA constraints and atomic pools already known to be faulty, in order for it to provide an better guess on which pool to use. Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Christoph Hellwig --- kernel/dma/pool.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/kernel/dma/pool.c b/kernel/dma/pool.c index 318035e093fb..5b9eaa2b498d 100644 --- a/kernel/dma/pool.c +++ b/kernel/dma/pool.c @@ -203,7 +203,7 @@ static int __init dma_atomic_pool_init(void) } postcore_initcall(dma_atomic_pool_init); -static inline struct gen_pool *dev_to_pool(struct device *dev) +static inline struct gen_pool *dma_guess_pool_from_device(struct device *dev) { u64 phys_mask; gfp_t gfp; @@ -217,10 +217,30 @@ static inline struct gen_pool *dev_to_pool(struct device *dev) return atomic_pool_kernel; } +static inline struct gen_pool *dma_get_safer_pool(struct gen_pool *bad_pool) +{ + if (bad_pool == atomic_pool_kernel) + return atomic_pool_dma32 ? : atomic_pool_dma; + + if (bad_pool == atomic_pool_dma32) + return atomic_pool_dma; + + return NULL; +} + +static inline struct gen_pool *dma_guess_pool(struct device *dev, + struct gen_pool *bad_pool) +{ + if (bad_pool) + return dma_get_safer_pool(bad_pool); + + return dma_guess_pool_from_device(dev); +} + void *dma_alloc_from_pool(struct device *dev, size_t size, struct page **ret_page, gfp_t flags) { - struct gen_pool *pool = dev_to_pool(dev); + struct gen_pool *pool = dma_guess_pool(dev, NULL); unsigned long val; void *ptr = NULL; @@ -249,7 +269,7 @@ void *dma_alloc_from_pool(struct device *dev, size_t size, bool dma_free_from_pool(struct device *dev, void *start, size_t size) { - struct gen_pool *pool = dev_to_pool(dev); + struct gen_pool *pool = dma_guess_pool(dev, NULL); if (!pool || !gen_pool_has_addr(pool, (unsigned long)start, size)) return false; -- cgit v1.2.3 From 81e9d894e03f9a279102c7aac62ea7cbf9949f4b Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Tue, 14 Jul 2020 14:39:28 +0200 Subject: dma-pool: make sure atomic pool suits device When allocating DMA memory from a pool, the core can only guess which atomic pool will fit a device's constraints. If it doesn't, get a safer atomic pool and try again. Fixes: c84dc6e68a1d ("dma-pool: add additional coherent pools to map to gfp mask") Reported-by: Jeremy Linton Suggested-by: Robin Murphy Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Christoph Hellwig --- kernel/dma/pool.c | 57 ++++++++++++++++++++++++++++++++++++------------------- 1 file changed, 37 insertions(+), 20 deletions(-) diff --git a/kernel/dma/pool.c b/kernel/dma/pool.c index 5b9eaa2b498d..d48d9acb585f 100644 --- a/kernel/dma/pool.c +++ b/kernel/dma/pool.c @@ -240,39 +240,56 @@ static inline struct gen_pool *dma_guess_pool(struct device *dev, void *dma_alloc_from_pool(struct device *dev, size_t size, struct page **ret_page, gfp_t flags) { - struct gen_pool *pool = dma_guess_pool(dev, NULL); - unsigned long val; + struct gen_pool *pool = NULL; + unsigned long val = 0; void *ptr = NULL; - - if (!pool) { - WARN(1, "%pGg atomic pool not initialised!\n", &flags); - return NULL; + phys_addr_t phys; + + while (1) { + pool = dma_guess_pool(dev, pool); + if (!pool) { + WARN(1, "Failed to get suitable pool for %s\n", + dev_name(dev)); + break; + } + + val = gen_pool_alloc(pool, size); + if (!val) + continue; + + phys = gen_pool_virt_to_phys(pool, val); + if (dma_coherent_ok(dev, phys, size)) + break; + + gen_pool_free(pool, val, size); + val = 0; } - val = gen_pool_alloc(pool, size); - if (likely(val)) { - phys_addr_t phys = gen_pool_virt_to_phys(pool, val); + if (val) { *ret_page = pfn_to_page(__phys_to_pfn(phys)); ptr = (void *)val; memset(ptr, 0, size); - } else { - WARN_ONCE(1, "DMA coherent pool depleted, increase size " - "(recommended min coherent_pool=%zuK)\n", - gen_pool_size(pool) >> 9); + + if (gen_pool_avail(pool) < atomic_pool_size) + schedule_work(&atomic_pool_work); } - if (gen_pool_avail(pool) < atomic_pool_size) - schedule_work(&atomic_pool_work); return ptr; } bool dma_free_from_pool(struct device *dev, void *start, size_t size) { - struct gen_pool *pool = dma_guess_pool(dev, NULL); + struct gen_pool *pool = NULL; - if (!pool || !gen_pool_has_addr(pool, (unsigned long)start, size)) - return false; - gen_pool_free(pool, (unsigned long)start, size); - return true; + while (1) { + pool = dma_guess_pool(dev, pool); + if (!pool) + return false; + + if (gen_pool_has_addr(pool, (unsigned long)start, size)) { + gen_pool_free(pool, (unsigned long)start, size); + return true; + } + } } -- cgit v1.2.3 From d9765e41d8e9ea2251bf73735a2895c8bad546fc Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Wed, 8 Jul 2020 18:49:39 +0200 Subject: dma-pool: do not allocate pool memory from CMA There is no guarantee to CMA's placement, so allocating a zone specific atomic pool from CMA might return memory from a completely different memory zone. So stop using it. Fixes: c84dc6e68a1d ("dma-pool: add additional coherent pools to map to gfp mask") Reported-by: Jeremy Linton Signed-off-by: Nicolas Saenz Julienne Tested-by: Jeremy Linton Acked-by: David Rientjes Signed-off-by: Christoph Hellwig --- kernel/dma/pool.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/kernel/dma/pool.c b/kernel/dma/pool.c index d48d9acb585f..6bc74a2d5127 100644 --- a/kernel/dma/pool.c +++ b/kernel/dma/pool.c @@ -6,7 +6,6 @@ #include #include #include -#include #include #include #include @@ -69,12 +68,7 @@ static int atomic_pool_expand(struct gen_pool *pool, size_t pool_size, do { pool_size = 1 << (PAGE_SHIFT + order); - - if (dev_get_cma_area(NULL)) - page = dma_alloc_from_contiguous(NULL, 1 << order, - order, false); - else - page = alloc_pages(gfp, order); + page = alloc_pages(gfp, order); } while (!page && order-- > 0); if (!page) goto out; @@ -118,8 +112,7 @@ remove_mapping: dma_common_free_remap(addr, pool_size); #endif free_page: __maybe_unused - if (!dma_release_from_contiguous(NULL, page, 1 << order)) - __free_pages(page, order); + __free_pages(page, order); out: return ret; } -- cgit v1.2.3 From 3ce315a704b4568616d1b14166cff3430ef07d12 Mon Sep 17 00:00:00 2001 From: Bartosz Szczepanek Date: Wed, 8 Jul 2020 15:46:13 +0200 Subject: thermal/int340x_thermal: Prevent page fault on .set_mode() op Starting from commit "thermal/int340x_thermal: Don't require IDSP to exist", priv->current_uuid_index is initialized to -1. This value may be passed to int3400_thermal_run_osc() from int3400_thermal_set_mode, contributing to page fault when accessing int3400_thermal_uuids array at index -1. This commit adds a check on uuid value to int3400_thermal_run_osc. Fixes: 8d485da0ddee ("thermal/int340x_thermal: Don't require IDSP to exist") Signed-off-by: Bartosz Szczepanek Reviewed-by: Pandruvada, Srinivas [ rzhang: Add Fixes tag ] Signed-off-by: Zhang Rui Link: https://lore.kernel.org/r/20200708134613.131555-1-bsz@semihalf.com --- drivers/thermal/intel/int340x_thermal/int3400_thermal.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c index 0b3a62655843..12448ccd27f1 100644 --- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c +++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c @@ -216,11 +216,16 @@ static int int3400_thermal_run_osc(acpi_handle handle, acpi_status status; int result = 0; struct acpi_osc_context context = { - .uuid_str = int3400_thermal_uuids[uuid], + .uuid_str = NULL, .rev = 1, .cap.length = 8, }; + if (uuid < 0 || uuid >= INT3400_THERMAL_MAXIMUM_UUID) + return -EINVAL; + + context.uuid_str = int3400_thermal_uuids[uuid]; + buf[OSC_QUERY_DWORD] = 0; buf[OSC_SUPPORT_DWORD] = enable; -- cgit v1.2.3 From fa291331cb24bd9665096d660b917998285aae17 Mon Sep 17 00:00:00 2001 From: "derek.fang" Date: Tue, 14 Jul 2020 18:13:20 +0800 Subject: ASoC: rt5682: Enable Vref2 under using PLL2 Enable Vref2 under long term using PLL2 to avoid clock unstable. Signed-off-by: derek.fang Link: https://lore.kernel.org/r/1594721600-29994-1-git-send-email-derek.fang@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt5682.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index dd741835e4d0..5adfaf3a7134 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -967,13 +967,12 @@ int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert) rt5682_enable_push_button_irq(component, false); snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1, RT5682_TRIG_JD_MASK, RT5682_TRIG_JD_LOW); - if (snd_soc_dapm_get_pin_status(dapm, "MICBIAS")) + if (!snd_soc_dapm_get_pin_status(dapm, "MICBIAS")) snd_soc_component_update_bits(component, - RT5682_PWR_ANLG_1, RT5682_PWR_VREF2, 0); - else + RT5682_PWR_ANLG_1, RT5682_PWR_MB, 0); + if (!snd_soc_dapm_get_pin_status(dapm, "Vref2")) snd_soc_component_update_bits(component, - RT5682_PWR_ANLG_1, - RT5682_PWR_VREF2 | RT5682_PWR_MB, 0); + RT5682_PWR_ANLG_1, RT5682_PWR_VREF2, 0); snd_soc_component_update_bits(component, RT5682_PWR_ANLG_3, RT5682_PWR_CBJ, 0); @@ -1609,8 +1608,7 @@ static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = { 0, set_filter_clk, SND_SOC_DAPM_PRE_PMU), SND_SOC_DAPM_SUPPLY("Vref1", RT5682_PWR_ANLG_1, RT5682_PWR_VREF1_BIT, 0, rt5682_set_verf, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU), - SND_SOC_DAPM_SUPPLY("Vref2", RT5682_PWR_ANLG_1, RT5682_PWR_VREF2_BIT, 0, - NULL, 0), + SND_SOC_DAPM_SUPPLY("Vref2", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("MICBIAS", SND_SOC_NOPM, 0, 0, NULL, 0), /* ASRC */ @@ -2493,6 +2491,15 @@ static int rt5682_wclk_prepare(struct clk_hw *hw) snd_soc_dapm_force_enable_pin_unlocked(dapm, "MICBIAS"); snd_soc_component_update_bits(component, RT5682_PWR_ANLG_1, RT5682_PWR_MB, RT5682_PWR_MB); + + snd_soc_dapm_force_enable_pin_unlocked(dapm, "Vref2"); + snd_soc_component_update_bits(component, RT5682_PWR_ANLG_1, + RT5682_PWR_VREF2 | RT5682_PWR_FV2, + RT5682_PWR_VREF2); + usleep_range(55000, 60000); + snd_soc_component_update_bits(component, RT5682_PWR_ANLG_1, + RT5682_PWR_FV2, RT5682_PWR_FV2); + snd_soc_dapm_force_enable_pin_unlocked(dapm, "I2S1"); snd_soc_dapm_force_enable_pin_unlocked(dapm, "PLL2F"); snd_soc_dapm_force_enable_pin_unlocked(dapm, "PLL2B"); @@ -2518,9 +2525,12 @@ static void rt5682_wclk_unprepare(struct clk_hw *hw) snd_soc_dapm_mutex_lock(dapm); snd_soc_dapm_disable_pin_unlocked(dapm, "MICBIAS"); + snd_soc_dapm_disable_pin_unlocked(dapm, "Vref2"); if (!rt5682->jack_type) snd_soc_component_update_bits(component, RT5682_PWR_ANLG_1, + RT5682_PWR_VREF2 | RT5682_PWR_FV2 | RT5682_PWR_MB, 0); + snd_soc_dapm_disable_pin_unlocked(dapm, "I2S1"); snd_soc_dapm_disable_pin_unlocked(dapm, "PLL2F"); snd_soc_dapm_disable_pin_unlocked(dapm, "PLL2B"); -- cgit v1.2.3 From a18fb07623813aaee1a69873c785865695a32c9e Mon Sep 17 00:00:00 2001 From: Chen Tao Date: Fri, 19 Jun 2020 18:42:40 +0800 Subject: ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module Fix memory leak in omap_hwmod_allocate_module not freeing in handling error path. Fixes: 8c87970543b17("ARM: OMAP2+: Add functions to allocate module data from device tree") Signed-off-by: Chen Tao Reviewed-by: Paul Walmsley [tony@atomide.com: fix call iounmap for missing regs] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c630457bb228..15b29a179c8a 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3435,7 +3435,7 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, regs = ioremap(data->module_pa, data->module_size); if (!regs) - return -ENOMEM; + goto out_free_sysc; } /* @@ -3445,13 +3445,13 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, if (oh->class->name && strcmp(oh->class->name, data->name)) { class = kmemdup(oh->class, sizeof(*oh->class), GFP_KERNEL); if (!class) - return -ENOMEM; + goto out_unmap; } if (list_empty(&oh->slave_ports)) { oi = kcalloc(1, sizeof(*oi), GFP_KERNEL); if (!oi) - return -ENOMEM; + goto out_free_class; /* * Note that we assume interconnect interface clocks will be @@ -3478,6 +3478,14 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, spin_unlock_irqrestore(&oh->_lock, flags); return 0; + +out_free_class: + kfree(class); +out_unmap: + iounmap(regs); +out_free_sysc: + kfree(sysc); + return -ENOMEM; } static const struct omap_hwmod_reset omap24xx_reset_quirks[] = { -- cgit v1.2.3 From 2a4117df9b436a0e4c79d211284ab2097bcd00dc Mon Sep 17 00:00:00 2001 From: dillon min Date: Tue, 14 Jul 2020 14:35:07 +0800 Subject: ARM: dts: Fix dcan driver probe failed on am437x platform Got following d_can probe errors with kernel 5.8-rc1 on am437x [ 10.730822] CAN device driver interface Starting Wait for Network to be Configured... [ OK ] Reached target Network. [ 10.787363] c_can_platform 481cc000.can: probe failed [ 10.792484] c_can_platform: probe of 481cc000.can failed with error -2 [ 10.799457] c_can_platform 481d0000.can: probe failed [ 10.804617] c_can_platform: probe of 481d0000.can failed with error -2 actually, Tony has fixed this issue on am335x with the patch [3] Since am437x has the same clock structure with am335x [1][2], so reuse the code from Tony Lindgren's patch [3] to fix it. [1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN Integration [2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN Integration [3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x") Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision") Signed-off-by: dillon min [tony@atomide.com: aligned commit message a bit for readability] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-l4.dtsi | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 0d0f9fe4a882..4129affde54e 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -1541,8 +1541,9 @@ reg = <0xcc020 0x4>; reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ - clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>; - clock-names = "fck"; + clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>, + <&dcan0_fck>; + clock-names = "fck", "osc"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xcc000 0x2000>; @@ -1550,6 +1551,8 @@ dcan0: can@0 { compatible = "ti,am4372-d_can", "ti,am3352-d_can"; reg = <0x0 0x2000>; + clocks = <&dcan0_fck>; + clock-names = "fck"; syscon-raminit = <&scm_conf 0x644 0>; interrupts = ; status = "disabled"; @@ -1561,8 +1564,9 @@ reg = <0xd0020 0x4>; reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ - clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>; - clock-names = "fck"; + clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>, + <&dcan1_fck>; + clock-names = "fck", "osc"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xd0000 0x2000>; @@ -1570,6 +1574,8 @@ dcan1: can@0 { compatible = "ti,am4372-d_can", "ti,am3352-d_can"; reg = <0x0 0x2000>; + clocks = <&dcan1_fck>; + clock-name = "fck"; syscon-raminit = <&scm_conf 0x644 1>; interrupts = ; status = "disabled"; -- cgit v1.2.3 From e3beca48a45b5e0e6e6a4e0124276b8248dcc9bb Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 9 Jul 2020 11:53:06 +0200 Subject: irqdomain/treewide: Keep firmware node unconditionally allocated Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after creating the irqdomain. The only purpose of these FW nodes is to convey name information. When this was introduced the core code did not store the pointer to the node in the irqdomain. A recent change stored the firmware node pointer in irqdomain for other reasons and missed to notice that the usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence are broken by this. Storing a dangling pointer is dangerous itself, but in case that the domain is destroyed later on this leads to a double free. Remove the freeing of the firmware node after creating the irqdomain from all affected call sites to cure this. Fixes: 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") Reported-by: Andy Shevchenko Signed-off-by: Thomas Gleixner Acked-by: Bjorn Helgaas Acked-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de --- arch/mips/pci/pci-xtalk-bridge.c | 5 +++-- arch/x86/kernel/apic/io_apic.c | 10 +++++----- arch/x86/kernel/apic/msi.c | 18 ++++++++++++------ arch/x86/kernel/apic/vector.c | 1 - arch/x86/platform/uv/uv_irq.c | 3 ++- drivers/iommu/amd/iommu.c | 5 +++-- drivers/iommu/hyperv-iommu.c | 5 ++++- drivers/iommu/intel/irq_remapping.c | 2 +- drivers/mfd/ioc3.c | 5 +++-- drivers/pci/controller/vmd.c | 5 +++-- 10 files changed, 36 insertions(+), 23 deletions(-) diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c index 3b2552fb7735..5958217861b8 100644 --- a/arch/mips/pci/pci-xtalk-bridge.c +++ b/arch/mips/pci/pci-xtalk-bridge.c @@ -627,9 +627,10 @@ static int bridge_probe(struct platform_device *pdev) return -ENOMEM; domain = irq_domain_create_hierarchy(parent, 0, 8, fn, &bridge_domain_ops, NULL); - irq_domain_free_fwnode(fn); - if (!domain) + if (!domain) { + irq_domain_free_fwnode(fn); return -ENOMEM; + } pci_set_flags(PCI_PROBE_ONLY); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index ce61e3e7d399..81ffcfbfaef2 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2316,12 +2316,12 @@ static int mp_irqdomain_create(int ioapic) ip->irqdomain = irq_domain_create_linear(fn, hwirqs, cfg->ops, (void *)(long)ioapic); - /* Release fw handle if it was allocated above */ - if (!cfg->dev) - irq_domain_free_fwnode(fn); - - if (!ip->irqdomain) + if (!ip->irqdomain) { + /* Release fw handle if it was allocated above */ + if (!cfg->dev) + irq_domain_free_fwnode(fn); return -ENOMEM; + } ip->irqdomain->parent = parent; diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c index 5cbaca58af95..c2b2911feeef 100644 --- a/arch/x86/kernel/apic/msi.c +++ b/arch/x86/kernel/apic/msi.c @@ -263,12 +263,13 @@ void __init arch_init_msi_domain(struct irq_domain *parent) msi_default_domain = pci_msi_create_irq_domain(fn, &pci_msi_domain_info, parent); - irq_domain_free_fwnode(fn); } - if (!msi_default_domain) + if (!msi_default_domain) { + irq_domain_free_fwnode(fn); pr_warn("failed to initialize irqdomain for MSI/MSI-x.\n"); - else + } else { msi_default_domain->flags |= IRQ_DOMAIN_MSI_NOMASK_QUIRK; + } } #ifdef CONFIG_IRQ_REMAP @@ -301,7 +302,8 @@ struct irq_domain *arch_create_remap_msi_irq_domain(struct irq_domain *parent, if (!fn) return NULL; d = pci_msi_create_irq_domain(fn, &pci_msi_ir_domain_info, parent); - irq_domain_free_fwnode(fn); + if (!d) + irq_domain_free_fwnode(fn); return d; } #endif @@ -364,7 +366,8 @@ static struct irq_domain *dmar_get_irq_domain(void) if (fn) { dmar_domain = msi_create_irq_domain(fn, &dmar_msi_domain_info, x86_vector_domain); - irq_domain_free_fwnode(fn); + if (!dmar_domain) + irq_domain_free_fwnode(fn); } out: mutex_unlock(&dmar_lock); @@ -489,7 +492,10 @@ struct irq_domain *hpet_create_irq_domain(int hpet_id) } d = msi_create_irq_domain(fn, domain_info, parent); - irq_domain_free_fwnode(fn); + if (!d) { + irq_domain_free_fwnode(fn); + kfree(domain_info); + } return d; } diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c index c48be6e1f676..cc8b16f89dd4 100644 --- a/arch/x86/kernel/apic/vector.c +++ b/arch/x86/kernel/apic/vector.c @@ -709,7 +709,6 @@ int __init arch_early_irq_init(void) x86_vector_domain = irq_domain_create_tree(fn, &x86_vector_domain_ops, NULL); BUG_ON(x86_vector_domain == NULL); - irq_domain_free_fwnode(fn); irq_set_default_host(x86_vector_domain); arch_init_msi_domain(x86_vector_domain); diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c index fc13cbbb2dce..abb6075397f0 100644 --- a/arch/x86/platform/uv/uv_irq.c +++ b/arch/x86/platform/uv/uv_irq.c @@ -167,9 +167,10 @@ static struct irq_domain *uv_get_irq_domain(void) goto out; uv_domain = irq_domain_create_tree(fn, &uv_domain_ops, NULL); - irq_domain_free_fwnode(fn); if (uv_domain) uv_domain->parent = x86_vector_domain; + else + irq_domain_free_fwnode(fn); out: mutex_unlock(&uv_lock); diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c index 74cca1757172..2f22326ee4df 100644 --- a/drivers/iommu/amd/iommu.c +++ b/drivers/iommu/amd/iommu.c @@ -3985,9 +3985,10 @@ int amd_iommu_create_irq_domain(struct amd_iommu *iommu) if (!fn) return -ENOMEM; iommu->ir_domain = irq_domain_create_tree(fn, &amd_ir_domain_ops, iommu); - irq_domain_free_fwnode(fn); - if (!iommu->ir_domain) + if (!iommu->ir_domain) { + irq_domain_free_fwnode(fn); return -ENOMEM; + } iommu->ir_domain->parent = arch_get_ir_parent_domain(); iommu->msi_domain = arch_create_remap_msi_irq_domain(iommu->ir_domain, diff --git a/drivers/iommu/hyperv-iommu.c b/drivers/iommu/hyperv-iommu.c index 3c0c67a99c7b..8919c1c70b68 100644 --- a/drivers/iommu/hyperv-iommu.c +++ b/drivers/iommu/hyperv-iommu.c @@ -155,7 +155,10 @@ static int __init hyperv_prepare_irq_remapping(void) 0, IOAPIC_REMAPPING_ENTRY, fn, &hyperv_ir_domain_ops, NULL); - irq_domain_free_fwnode(fn); + if (!ioapic_ir_domain) { + irq_domain_free_fwnode(fn); + return -ENOMEM; + } /* * Hyper-V doesn't provide irq remapping function for diff --git a/drivers/iommu/intel/irq_remapping.c b/drivers/iommu/intel/irq_remapping.c index 7f8769800815..9564d23d094f 100644 --- a/drivers/iommu/intel/irq_remapping.c +++ b/drivers/iommu/intel/irq_remapping.c @@ -563,8 +563,8 @@ static int intel_setup_irq_remapping(struct intel_iommu *iommu) 0, INTR_REMAP_TABLE_ENTRIES, fn, &intel_ir_domain_ops, iommu); - irq_domain_free_fwnode(fn); if (!iommu->ir_domain) { + irq_domain_free_fwnode(fn); pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id); goto out_free_bitmap; } diff --git a/drivers/mfd/ioc3.c b/drivers/mfd/ioc3.c index 02998d4eb74b..74cee7cb0afc 100644 --- a/drivers/mfd/ioc3.c +++ b/drivers/mfd/ioc3.c @@ -142,10 +142,11 @@ static int ioc3_irq_domain_setup(struct ioc3_priv_data *ipd, int irq) goto err; domain = irq_domain_create_linear(fn, 24, &ioc3_irq_domain_ops, ipd); - if (!domain) + if (!domain) { + irq_domain_free_fwnode(fn); goto err; + } - irq_domain_free_fwnode(fn); ipd->domain = domain; irq_set_chained_handler_and_data(irq, ioc3_irq_handler, domain); diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index e386d4eac407..9a64cf90c291 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -546,9 +546,10 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) vmd->irq_domain = pci_msi_create_irq_domain(fn, &vmd_msi_domain_info, x86_vector_domain); - irq_domain_free_fwnode(fn); - if (!vmd->irq_domain) + if (!vmd->irq_domain) { + irq_domain_free_fwnode(fn); return -ENODEV; + } pci_add_resource(&resources, &vmd->resources[0]); pci_add_resource_offset(&resources, &vmd->resources[1], offset[0]); -- cgit v1.2.3 From 42de9b0a2bb29238d316bd56407c0e727d6d7ff9 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Thu, 9 Jul 2020 16:49:31 +0100 Subject: drm/i915/selftests: Fix compare functions provided for sorting Both cmp_u32 and cmp_u64 are comparing the pointers instead of the value at those pointers. This will result in incorrect/unsorted list. Fix it by deferencing the pointers before comparison. Fixes: 4ba74e53ada3 ("drm/i915/selftests: Verify frequency scaling with RPS") Fixes: 8757797ff9c9 ("drm/i915/selftests: Repeat the rps clock frequency measurement") Cc: Chris Wilson Cc: Mika Kuoppala Signed-off-by: Sudeep Holla Reviewed-by: Chris Wilson Signed-off-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20200709154931.23310-1-sudeep.holla@arm.com (cherry picked from commit 2196dfea896f7027b43bae848890ce4aec5c8724) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/selftest_rps.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/selftest_rps.c b/drivers/gpu/drm/i915/gt/selftest_rps.c index 5049c3dd08a6..c91981e75ebf 100644 --- a/drivers/gpu/drm/i915/gt/selftest_rps.c +++ b/drivers/gpu/drm/i915/gt/selftest_rps.c @@ -44,9 +44,9 @@ static int cmp_u64(const void *A, const void *B) { const u64 *a = A, *b = B; - if (a < b) + if (*a < *b) return -1; - else if (a > b) + else if (*a > *b) return 1; else return 0; @@ -56,9 +56,9 @@ static int cmp_u32(const void *A, const void *B) { const u32 *a = A, *b = B; - if (a < b) + if (*a < *b) return -1; - else if (a > b) + else if (*a > *b) return 1; else return 0; -- cgit v1.2.3 From aee62e02c48bd62b9b07f5e297ecfc9aaa964937 Mon Sep 17 00:00:00 2001 From: Umesh Nerlige Ramappa Date: Thu, 9 Jul 2020 23:45:03 +0100 Subject: drm/i915/perf: Use GTT when saving/restoring engine GPR MI_STORE_REGISTER_MEM and MI_LOAD_REGISTER_MEM need to know which translation to use when saving restoring the engine general purpose registers to and from the GT scratch. Since GT scratch is mapped to ggtt, we need to set an additional bit in the command to use GTT. Fixes: daed3e44396d17 ("drm/i915/perf: implement active wait for noa configurations") Suggested-by: Prathap Kumar Valsan Signed-off-by: Umesh Nerlige Ramappa Reviewed-by: Lionel Landwerlin Reviewed-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20200709224504.11345-1-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson (cherry picked from commit e43ff99c8deda85234e6233e0f4af6cb09566a37) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_perf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c index 25329b7600c9..014f34c047d5 100644 --- a/drivers/gpu/drm/i915/i915_perf.c +++ b/drivers/gpu/drm/i915/i915_perf.c @@ -1592,6 +1592,7 @@ static u32 *save_restore_register(struct i915_perf_stream *stream, u32 *cs, u32 d; cmd = save ? MI_STORE_REGISTER_MEM : MI_LOAD_REGISTER_MEM; + cmd |= MI_SRM_LRM_GLOBAL_GTT; if (INTEL_GEN(stream->perf->i915) >= 8) cmd++; -- cgit v1.2.3 From 858f1299fd6f7518ddef19ddd304c8398ac79fa5 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 11 Jul 2020 21:32:36 +0100 Subject: drm/i915/gt: Ignore irq enabling on the virtual engines We do not use the virtual engines for interrupts (they have physical components), but we do use them to decouple the fence signaling during submission. Currently, when we submit a completed request, we try to enable the interrupt handler for the virtual engine, but we never disarm it. A quick fix is then to mark the irq as enabled, and it will then remain enabled -- and this prevents us from waking the device and never letting it sleep again. Fixes: f8db4d051b5e ("drm/i915: Initialise breadcrumb lists on the virtual engine") Signed-off-by: Chris Wilson Cc: Mika Kuoppala Cc: Tvrtko Ursulin Cc: # v5.5+ Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20200711203236.12330-1-chris@chris-wilson.co.uk (cherry picked from commit 4fe6abb8f51355224808ab02a9febf65d184c40b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_lrc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/gt/intel_lrc.c b/drivers/gpu/drm/i915/gt/intel_lrc.c index 7c3d8ef4a47c..d270d2db6f0a 100644 --- a/drivers/gpu/drm/i915/gt/intel_lrc.c +++ b/drivers/gpu/drm/i915/gt/intel_lrc.c @@ -5688,6 +5688,7 @@ intel_execlists_create_virtual(struct intel_engine_cs **siblings, intel_engine_init_active(&ve->base, ENGINE_VIRTUAL); intel_engine_init_breadcrumbs(&ve->base); intel_engine_init_execlists(&ve->base); + ve->base.breadcrumbs.irq_armed = true; /* fake HW, used for irq_work */ ve->base.cops = &virtual_context_ops; ve->base.request_alloc = execlists_request_alloc; -- cgit v1.2.3 From 110f9efa858f584c6bed177cd48d0c0f526940e1 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 13 Jul 2020 17:05:49 +0100 Subject: drm/i915/gt: Only swap to a random sibling once upon creation The danger in switching at random upon intel_context_pin is that the context may still actually be inflight, as it will not be scheduled out until a context switch after it is complete -- that may be a long time after we do a final intel_context_unpin. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2118 Fixes: 6d06779e8672 ("drm/i915: Load balancing across a virtual engine") Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: # v5.3+ Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20200713160549.17344-1-chris@chris-wilson.co.uk (cherry picked from commit 90a987205c6cf74116a102ed446d22d92cdaf915) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_lrc.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_lrc.c b/drivers/gpu/drm/i915/gt/intel_lrc.c index d270d2db6f0a..cb07e1d2a353 100644 --- a/drivers/gpu/drm/i915/gt/intel_lrc.c +++ b/drivers/gpu/drm/i915/gt/intel_lrc.c @@ -5396,13 +5396,8 @@ static void virtual_engine_initial_hint(struct virtual_engine *ve) * typically be the first we inspect for submission. */ swp = prandom_u32_max(ve->num_siblings); - if (!swp) - return; - - swap(ve->siblings[swp], ve->siblings[0]); - if (!intel_engine_has_relative_mmio(ve->siblings[0])) - virtual_update_register_offsets(ve->context.lrc_reg_state, - ve->siblings[0]); + if (swp) + swap(ve->siblings[swp], ve->siblings[0]); } static int virtual_context_alloc(struct intel_context *ce) @@ -5415,15 +5410,9 @@ static int virtual_context_alloc(struct intel_context *ce) static int virtual_context_pin(struct intel_context *ce) { struct virtual_engine *ve = container_of(ce, typeof(*ve), context); - int err; /* Note: we must use a real engine class for setting up reg state */ - err = __execlists_context_pin(ce, ve->siblings[0]); - if (err) - return err; - - virtual_engine_initial_hint(ve); - return 0; + return __execlists_context_pin(ce, ve->siblings[0]); } static void virtual_context_enter(struct intel_context *ce) @@ -5770,6 +5759,7 @@ intel_execlists_create_virtual(struct intel_engine_cs **siblings, ve->base.flags |= I915_ENGINE_IS_VIRTUAL; + virtual_engine_initial_hint(ve); return &ve->context; err_put: -- cgit v1.2.3 From 6647e6cdba753e71170be7da2acfead7154f56d8 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Wed, 12 Feb 2020 14:54:45 +0100 Subject: drm/i915: Move cec_notifier to intel_hdmi_connector_unregister, v2. This fixes the following KASAN splash on module reload: [ 145.136327] ================================================================== [ 145.136502] BUG: KASAN: use-after-free in intel_hdmi_destroy+0x74/0x80 [i915] [ 145.136514] Read of size 8 at addr ffff888216641830 by task kworker/1:1/134 [ 145.136535] CPU: 1 PID: 134 Comm: kworker/1:1 Tainted: G U T 5.5.0-rc7-valkyria+ #5783 [ 145.136539] Hardware name: GIGABYTE GB-BKi3A-7100/MFLP3AP-00, BIOS F1 07/27/2016 [ 145.136546] Workqueue: events drm_connector_free_work_fn [ 145.136551] Call Trace: [ 145.136560] dump_stack+0xa1/0xe0 [ 145.136571] print_address_description.constprop.0+0x1e/0x210 [ 145.136639] ? intel_hdmi_destroy+0x74/0x80 [i915] [ 145.136703] ? intel_hdmi_destroy+0x74/0x80 [i915] [ 145.136710] __kasan_report.cold+0x1b/0x37 [ 145.136790] ? intel_hdmi_destroy+0x74/0x80 [i915] [ 145.136863] ? intel_hdmi_destroy+0x74/0x80 [i915] [ 145.136870] kasan_report+0x27/0x30 [ 145.136881] __asan_report_load8_noabort+0x1c/0x20 [ 145.136946] intel_hdmi_destroy+0x74/0x80 [i915] [ 145.136954] drm_connector_free_work_fn+0xd1/0x100 [ 145.136967] process_one_work+0x86e/0x1610 [ 145.136987] ? pwq_dec_nr_in_flight+0x2f0/0x2f0 [ 145.137004] ? move_linked_works+0x128/0x2c0 [ 145.137021] worker_thread+0x63e/0xc90 [ 145.137048] kthread+0x2f6/0x3f0 [ 145.137054] ? calculate_sigpending+0x81/0xa0 [ 145.137059] ? process_one_work+0x1610/0x1610 [ 145.137064] ? kthread_bind+0x40/0x40 [ 145.137075] ret_from_fork+0x24/0x30 [ 145.137111] Allocated by task 0: [ 145.137119] (stack is not available) [ 145.137137] Freed by task 5053: [ 145.137147] save_stack+0x28/0x90 [ 145.137152] __kasan_slab_free+0x136/0x180 [ 145.137157] kasan_slab_free+0x26/0x30 [ 145.137161] kfree+0xe6/0x350 [ 145.137242] intel_ddi_encoder_destroy+0x60/0x80 [i915] [ 145.137252] drm_mode_config_cleanup+0x11d/0x8f0 [ 145.137329] intel_modeset_driver_remove+0x1f5/0x350 [i915] [ 145.137403] i915_driver_remove+0xc4/0x130 [i915] [ 145.137482] i915_pci_remove+0x3e/0x90 [i915] [ 145.137489] pci_device_remove+0x108/0x2d0 [ 145.137494] device_release_driver_internal+0x1e6/0x4a0 [ 145.137499] driver_detach+0xcb/0x198 [ 145.137503] bus_remove_driver+0xde/0x204 [ 145.137508] driver_unregister+0x6d/0xa0 [ 145.137513] pci_unregister_driver+0x2e/0x230 [ 145.137576] i915_exit+0x1f/0x26 [i915] [ 145.137157] kasan_slab_free+0x26/0x30 [ 145.137161] kfree+0xe6/0x350 [ 145.137242] intel_ddi_encoder_destroy+0x60/0x80 [i915] [ 145.137252] drm_mode_config_cleanup+0x11d/0x8f0 [ 145.137329] intel_modeset_driver_remove+0x1f5/0x350 [i915] [ 145.137403] i915_driver_remove+0xc4/0x130 [i915] [ 145.137482] i915_pci_remove+0x3e/0x90 [i915] [ 145.137489] pci_device_remove+0x108/0x2d0 [ 145.137494] device_release_driver_internal+0x1e6/0x4a0 [ 145.137499] driver_detach+0xcb/0x198 [ 145.137503] bus_remove_driver+0xde/0x204 [ 145.137508] driver_unregister+0x6d/0xa0 [ 145.137513] pci_unregister_driver+0x2e/0x230 [ 145.137576] i915_exit+0x1f/0x26 [i915] [ 145.137581] __x64_sys_delete_module+0x35b/0x470 [ 145.137586] do_syscall_64+0x99/0x4e0 [ 145.137591] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 145.137606] The buggy address belongs to the object at ffff888216640000 which belongs to the cache kmalloc-8k of size 8192 [ 145.137618] The buggy address is located 6192 bytes inside of 8192-byte region [ffff888216640000, ffff888216642000) [ 145.137630] The buggy address belongs to the page: [ 145.137640] page:ffffea0008599000 refcount:1 mapcount:0 mapping:ffff888107c02a80 index:0xffff888216644000 compound_mapcount: 0 [ 145.137647] raw: 0200000000010200 0000000000000000 0000000100000001 ffff888107c02a80 [ 145.137652] raw: ffff888216644000 0000000080020001 00000001ffffffff 0000000000000000 [ 145.137656] page dumped because: kasan: bad access detected [ 145.137668] Memory state around the buggy address: [ 145.137678] ffff888216641700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 145.137687] ffff888216641780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 145.137697] >ffff888216641800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 145.137706] ^ [ 145.137715] ffff888216641880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 145.137724] ffff888216641900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 145.137733] ================================================================== [ 145.137742] Disabling lock debugging due to kernel taint Changes since v1: - Add fixes tags. - Use early unregister. Signed-off-by: Maarten Lankhorst Fixes: 9c229127aee2 ("drm/i915: hdmi: add CEC notifier to intel_hdmi") Cc: # v4.19+ Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200212135445.1469133-1-maarten.lankhorst@linux.intel.com (cherry picked from commit a581483b1e5466d28fc50ff623fba31cea2cccb6) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_hdmi.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c index 010f37240710..95b6d9457910 100644 --- a/drivers/gpu/drm/i915/display/intel_hdmi.c +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c @@ -2867,19 +2867,13 @@ intel_hdmi_connector_register(struct drm_connector *connector) return ret; } -static void intel_hdmi_destroy(struct drm_connector *connector) +static void intel_hdmi_connector_unregister(struct drm_connector *connector) { struct cec_notifier *n = intel_attached_hdmi(to_intel_connector(connector))->cec_notifier; cec_notifier_conn_unregister(n); - intel_connector_destroy(connector); -} - -static void intel_hdmi_connector_unregister(struct drm_connector *connector) -{ intel_hdmi_remove_i2c_symlink(connector); - intel_connector_unregister(connector); } @@ -2891,7 +2885,7 @@ static const struct drm_connector_funcs intel_hdmi_connector_funcs = { .atomic_set_property = intel_digital_connector_atomic_set_property, .late_register = intel_hdmi_connector_register, .early_unregister = intel_hdmi_connector_unregister, - .destroy = intel_hdmi_destroy, + .destroy = intel_connector_destroy, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, .atomic_duplicate_state = intel_digital_connector_duplicate_state, }; -- cgit v1.2.3 From 92e0575b99835b5b3aaab2132dd551e0e04eb96a Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Sat, 11 Jul 2020 11:03:36 +0300 Subject: drm/i915: Recalculate FBC w/a stride when needed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently we're failing to recalculate the gen9 FBC w/a stride unless something more drastic than just the modifier itself has changed. This often leaves us with FBC enabled with the linear fbdev framebuffer without the w/a stride enabled. That will cause an immediate underrun and FBC will get promptly disabled. Fix the problem by checking if the w/a stride is about to change, and go through the full dance if so. This part of the FBC code is still pretty much a disaster and will need lots more work. But this should at least fix the immediate issue. v2: Deactivate FBC when the modifier changes since that will likely require resetting the w/a CFB stride Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20200711080336.13423-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza (cherry picked from commit 0428ab013fdd39dbfb8f4cd8ad2b60af3776c6b9) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_fbc.c | 33 +++++++++++++++++++++++++------- drivers/gpu/drm/i915/i915_drv.h | 1 + 2 files changed, 27 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_fbc.c b/drivers/gpu/drm/i915/display/intel_fbc.c index a65d9d8b79a7..412572f88b67 100644 --- a/drivers/gpu/drm/i915/display/intel_fbc.c +++ b/drivers/gpu/drm/i915/display/intel_fbc.c @@ -719,6 +719,25 @@ static bool intel_fbc_cfb_size_changed(struct drm_i915_private *dev_priv) fbc->compressed_fb.size * fbc->threshold; } +static u16 intel_fbc_gen9_wa_cfb_stride(struct drm_i915_private *dev_priv) +{ + struct intel_fbc *fbc = &dev_priv->fbc; + struct intel_fbc_state_cache *cache = &fbc->state_cache; + + if ((IS_GEN9_BC(dev_priv) || IS_BROXTON(dev_priv)) && + cache->fb.modifier != I915_FORMAT_MOD_X_TILED) + return DIV_ROUND_UP(cache->plane.src_w, 32 * fbc->threshold) * 8; + else + return 0; +} + +static bool intel_fbc_gen9_wa_cfb_stride_changed(struct drm_i915_private *dev_priv) +{ + struct intel_fbc *fbc = &dev_priv->fbc; + + return fbc->params.gen9_wa_cfb_stride != intel_fbc_gen9_wa_cfb_stride(dev_priv); +} + static bool intel_fbc_can_enable(struct drm_i915_private *dev_priv) { struct intel_fbc *fbc = &dev_priv->fbc; @@ -877,6 +896,7 @@ static void intel_fbc_get_reg_params(struct intel_crtc *crtc, params->crtc.i9xx_plane = to_intel_plane(crtc->base.primary)->i9xx_plane; params->fb.format = cache->fb.format; + params->fb.modifier = cache->fb.modifier; params->fb.stride = cache->fb.stride; params->cfb_size = intel_fbc_calculate_cfb_size(dev_priv, cache); @@ -906,6 +926,9 @@ static bool intel_fbc_can_flip_nuke(const struct intel_crtc_state *crtc_state) if (params->fb.format != cache->fb.format) return false; + if (params->fb.modifier != cache->fb.modifier) + return false; + if (params->fb.stride != cache->fb.stride) return false; @@ -1185,7 +1208,8 @@ void intel_fbc_enable(struct intel_atomic_state *state, if (fbc->crtc) { if (fbc->crtc != crtc || - !intel_fbc_cfb_size_changed(dev_priv)) + (!intel_fbc_cfb_size_changed(dev_priv) && + !intel_fbc_gen9_wa_cfb_stride_changed(dev_priv))) goto out; __intel_fbc_disable(dev_priv); @@ -1207,12 +1231,7 @@ void intel_fbc_enable(struct intel_atomic_state *state, goto out; } - if ((IS_GEN9_BC(dev_priv) || IS_BROXTON(dev_priv)) && - plane_state->hw.fb->modifier != I915_FORMAT_MOD_X_TILED) - cache->gen9_wa_cfb_stride = - DIV_ROUND_UP(cache->plane.src_w, 32 * fbc->threshold) * 8; - else - cache->gen9_wa_cfb_stride = 0; + cache->gen9_wa_cfb_stride = intel_fbc_gen9_wa_cfb_stride(dev_priv); drm_dbg_kms(&dev_priv->drm, "Enabling FBC on pipe %c\n", pipe_name(crtc->pipe)); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f79f118bf192..ae99a9190200 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -440,6 +440,7 @@ struct intel_fbc { struct { const struct drm_format_info *format; unsigned int stride; + u64 modifier; } fb; int cfb_size; -- cgit v1.2.3 From 7d65a577bb58d4f27a3398a4c0cb0b00ab7d0511 Mon Sep 17 00:00:00 2001 From: Jack Xiao Date: Fri, 10 Jul 2020 12:18:22 +0800 Subject: drm/amdgpu/gfx10: fix race condition for kiq MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During preemption test for gfx10, it uses kiq to trigger gfx preemption, which would result in race condition with flushing TLB for kiq. Signed-off-by: Jack Xiao Reviewed-by: Hawking Zhang Acked-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index bd5dd4f64311..fac77a86c04b 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -7513,12 +7513,17 @@ static int gfx_v10_0_ring_preempt_ib(struct amdgpu_ring *ring) struct amdgpu_device *adev = ring->adev; struct amdgpu_kiq *kiq = &adev->gfx.kiq; struct amdgpu_ring *kiq_ring = &kiq->ring; + unsigned long flags; if (!kiq->pmf || !kiq->pmf->kiq_unmap_queues) return -EINVAL; - if (amdgpu_ring_alloc(kiq_ring, kiq->pmf->unmap_queues_size)) + spin_lock_irqsave(&kiq->ring_lock, flags); + + if (amdgpu_ring_alloc(kiq_ring, kiq->pmf->unmap_queues_size)) { + spin_unlock_irqrestore(&kiq->ring_lock, flags); return -ENOMEM; + } /* assert preemption condition */ amdgpu_ring_set_preempt_cond_exec(ring, false); @@ -7529,6 +7534,8 @@ static int gfx_v10_0_ring_preempt_ib(struct amdgpu_ring *ring) ++ring->trail_seq); amdgpu_ring_commit(kiq_ring); + spin_unlock_irqrestore(&kiq->ring_lock, flags); + /* poll the trailing fence */ for (i = 0; i < adev->usec_timeout; i++) { if (ring->trail_seq == -- cgit v1.2.3 From d845a2051b6b673fab4229b920ea04c7c4352b51 Mon Sep 17 00:00:00 2001 From: Jack Xiao Date: Fri, 10 Jul 2020 12:34:52 +0800 Subject: drm/amdgpu: fix preemption unit test Remove signaled jobs from job list and ensure the job was indeed preempted. Signed-off-by: Jack Xiao Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index d33cb344be69..a414da22a359 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -1295,27 +1295,37 @@ static void amdgpu_ib_preempt_job_recovery(struct drm_gpu_scheduler *sched) static void amdgpu_ib_preempt_mark_partial_job(struct amdgpu_ring *ring) { struct amdgpu_job *job; - struct drm_sched_job *s_job; + struct drm_sched_job *s_job, *tmp; uint32_t preempt_seq; struct dma_fence *fence, **ptr; struct amdgpu_fence_driver *drv = &ring->fence_drv; struct drm_gpu_scheduler *sched = &ring->sched; + bool preempted = true; if (ring->funcs->type != AMDGPU_RING_TYPE_GFX) return; preempt_seq = le32_to_cpu(*(drv->cpu_addr + 2)); - if (preempt_seq <= atomic_read(&drv->last_seq)) - return; + if (preempt_seq <= atomic_read(&drv->last_seq)) { + preempted = false; + goto no_preempt; + } preempt_seq &= drv->num_fences_mask; ptr = &drv->fences[preempt_seq]; fence = rcu_dereference_protected(*ptr, 1); +no_preempt: spin_lock(&sched->job_list_lock); - list_for_each_entry(s_job, &sched->ring_mirror_list, node) { + list_for_each_entry_safe(s_job, tmp, &sched->ring_mirror_list, node) { + if (dma_fence_is_signaled(&s_job->s_fence->finished)) { + /* remove job from ring_mirror_list */ + list_del_init(&s_job->node); + sched->ops->free_job(s_job); + continue; + } job = to_amdgpu_job(s_job); - if (job->fence == fence) + if (preempted && job->fence == fence) /* mark the job as preempted */ job->preemption_status |= AMDGPU_IB_PREEMPTED; } -- cgit v1.2.3 From 3168470142e0a82b5732c04ed4c031a9322ae170 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 10 Jul 2020 17:50:00 -0400 Subject: drm/amdgpu/display: create fake mst encoders ahead of time (v4) Prevents a warning in the MST create connector case. v2: create global fake encoders rather per connector fake encoders to avoid running out of encoder indices. v3: use the actual number of crtcs on the asic rather than the max to conserve encoders. v4: v3 plus missing hunk I forgot to git add. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1108 Fixes: c6385e503aeaf9 ("drm/amdgpu: drop legacy drm load and unload callbacks") Reviewed-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org # 5.7.x --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 9 ++++ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 11 ++++- .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 53 +++++++++++----------- .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.h | 3 ++ 4 files changed, 48 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index db5e0bb0d935..b30e31444aef 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -974,6 +974,9 @@ static int amdgpu_dm_init(struct amdgpu_device *adev) /* Update the actual used number of crtc */ adev->mode_info.num_crtc = adev->dm.display_indexes_num; + /* create fake encoders for MST */ + dm_dp_create_fake_mst_encoders(adev); + /* TODO: Add_display_info? */ /* TODO use dynamic cursor width */ @@ -997,6 +1000,12 @@ error: static void amdgpu_dm_fini(struct amdgpu_device *adev) { + int i; + + for (i = 0; i < adev->dm.display_indexes_num; i++) { + drm_encoder_cleanup(&adev->dm.mst_encoders[i].base); + } + amdgpu_dm_audio_fini(adev); amdgpu_dm_destroy_drm_device(&adev->dm); diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h index d61186ff411d..648180ccdc2e 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h @@ -43,6 +43,9 @@ */ #define AMDGPU_DM_MAX_DISPLAY_INDEX 31 + +#define AMDGPU_DM_MAX_CRTC 6 + /* #include "include/amdgpu_dal_power_if.h" #include "amdgpu_dm_irq.h" @@ -328,6 +331,13 @@ struct amdgpu_display_manager { * available in FW */ const struct gpu_info_soc_bounding_box_v1_0 *soc_bounding_box; + + /** + * @mst_encoders: + * + * fake encoders used for DP MST. + */ + struct amdgpu_encoder mst_encoders[AMDGPU_DM_MAX_CRTC]; }; struct amdgpu_dm_connector { @@ -356,7 +366,6 @@ struct amdgpu_dm_connector { struct amdgpu_dm_dp_aux dm_dp_aux; struct drm_dp_mst_port *port; struct amdgpu_dm_connector *mst_port; - struct amdgpu_encoder *mst_encoder; struct drm_dp_aux *dsc_aux; /* TODO see if we can merge with ddc_bus or make a dm_connector */ diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index ae0a7ef1d595..e5ecc5affa1e 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -95,7 +95,6 @@ dm_dp_mst_connector_destroy(struct drm_connector *connector) { struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); - struct amdgpu_encoder *amdgpu_encoder = aconnector->mst_encoder; if (aconnector->dc_sink) { dc_link_remove_remote_sink(aconnector->dc_link, @@ -105,8 +104,6 @@ dm_dp_mst_connector_destroy(struct drm_connector *connector) kfree(aconnector->edid); - drm_encoder_cleanup(&amdgpu_encoder->base); - kfree(amdgpu_encoder); drm_connector_cleanup(connector); drm_dp_mst_put_port_malloc(aconnector->port); kfree(aconnector); @@ -243,7 +240,11 @@ static struct drm_encoder * dm_mst_atomic_best_encoder(struct drm_connector *connector, struct drm_connector_state *connector_state) { - return &to_amdgpu_dm_connector(connector)->mst_encoder->base; + struct drm_device *dev = connector->dev; + struct amdgpu_device *adev = dev->dev_private; + struct amdgpu_crtc *acrtc = to_amdgpu_crtc(connector_state->crtc); + + return &adev->dm.mst_encoders[acrtc->crtc_id].base; } static int @@ -306,31 +307,27 @@ static const struct drm_encoder_funcs amdgpu_dm_encoder_funcs = { .destroy = amdgpu_dm_encoder_destroy, }; -static struct amdgpu_encoder * -dm_dp_create_fake_mst_encoder(struct amdgpu_dm_connector *connector) +void +dm_dp_create_fake_mst_encoders(struct amdgpu_device *adev) { - struct drm_device *dev = connector->base.dev; - struct amdgpu_device *adev = dev->dev_private; - struct amdgpu_encoder *amdgpu_encoder; - struct drm_encoder *encoder; - - amdgpu_encoder = kzalloc(sizeof(*amdgpu_encoder), GFP_KERNEL); - if (!amdgpu_encoder) - return NULL; + struct drm_device *dev = adev->ddev; + int i; - encoder = &amdgpu_encoder->base; - encoder->possible_crtcs = amdgpu_dm_get_encoder_crtc_mask(adev); + for (i = 0; i < adev->dm.display_indexes_num; i++) { + struct amdgpu_encoder *amdgpu_encoder = &adev->dm.mst_encoders[i]; + struct drm_encoder *encoder = &amdgpu_encoder->base; - drm_encoder_init( - dev, - &amdgpu_encoder->base, - &amdgpu_dm_encoder_funcs, - DRM_MODE_ENCODER_DPMST, - NULL); + encoder->possible_crtcs = amdgpu_dm_get_encoder_crtc_mask(adev); - drm_encoder_helper_add(encoder, &amdgpu_dm_encoder_helper_funcs); + drm_encoder_init( + dev, + &amdgpu_encoder->base, + &amdgpu_dm_encoder_funcs, + DRM_MODE_ENCODER_DPMST, + NULL); - return amdgpu_encoder; + drm_encoder_helper_add(encoder, &amdgpu_dm_encoder_helper_funcs); + } } static struct drm_connector * @@ -343,6 +340,7 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, struct amdgpu_device *adev = dev->dev_private; struct amdgpu_dm_connector *aconnector; struct drm_connector *connector; + int i; aconnector = kzalloc(sizeof(*aconnector), GFP_KERNEL); if (!aconnector) @@ -369,9 +367,10 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, master->dc_link, master->connector_id); - aconnector->mst_encoder = dm_dp_create_fake_mst_encoder(master); - drm_connector_attach_encoder(&aconnector->base, - &aconnector->mst_encoder->base); + for (i = 0; i < adev->dm.display_indexes_num; i++) { + drm_connector_attach_encoder(&aconnector->base, + &adev->dm.mst_encoders[i].base); + } connector->max_bpc_property = master->base.max_bpc_property; if (connector->max_bpc_property) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h index d2c56579a2cc..b38bd68121ce 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h @@ -35,6 +35,9 @@ void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm, struct amdgpu_dm_connector *aconnector, int link_index); +void +dm_dp_create_fake_mst_encoders(struct amdgpu_device *adev); + #if defined(CONFIG_DRM_AMD_DC_DCN) bool compute_mst_dsc_configs_for_state(struct drm_atomic_state *state, struct dc_state *dc_state); -- cgit v1.2.3 From b448d30b0c303d5454ea572b772d1ffae96bc6e7 Mon Sep 17 00:00:00 2001 From: hersen wu Date: Mon, 22 Jun 2020 13:29:16 -0400 Subject: drm/amd/display: OLED panel backlight adjust not work with external display connected [Why] amdgpu_dm->backlight_caps is for single eDP only. the caps are upddated for very connector. Real eDP caps will be overwritten by other external display. For OLED panel, caps->aux_support is set to 1 for OLED pnael. after external connected, caps+.aux_support is set to 0. This causes OLED backlight adjustment not work. [How] within update_conector_ext_caps, backlight caps will be updated only for eDP connector. Cc: stable@vger.kernel.org Signed-off-by: hersen wu Reviewed-by: Nicholas Kazlauskas Acked-by: Rodrigo Siqueira Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index b30e31444aef..86ffa0c2880f 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2019,6 +2019,7 @@ static void update_connector_ext_caps(struct amdgpu_dm_connector *aconnector) struct amdgpu_display_manager *dm; struct drm_connector *conn_base; struct amdgpu_device *adev; + struct dc_link *link = NULL; static const u8 pre_computed_values[] = { 50, 51, 52, 53, 55, 56, 57, 58, 59, 61, 62, 63, 65, 66, 68, 69, 71, 72, 74, 75, 77, 79, 81, 82, 84, 86, 88, 90, 92, 94, 96, 98}; @@ -2026,6 +2027,10 @@ static void update_connector_ext_caps(struct amdgpu_dm_connector *aconnector) if (!aconnector || !aconnector->dc_link) return; + link = aconnector->dc_link; + if (link->connector_signal != SIGNAL_TYPE_EDP) + return; + conn_base = &aconnector->base; adev = conn_base->dev->dev_private; dm = &adev->dm; -- cgit v1.2.3 From be73e608ae2711dc8a1ab8b9549d9e348061b2ee Mon Sep 17 00:00:00 2001 From: Josip Pavic Date: Mon, 6 Jul 2020 15:43:39 -0400 Subject: drm/amd/display: handle failed allocation during stream construction [Why] Failing to allocate a transfer function during stream construction leads to a null pointer dereference [How] Handle the failed allocation by failing the stream construction Cc: stable@vger.kernel.org Signed-off-by: Josip Pavic Reviewed-by: Aric Cyr Acked-by: Rodrigo Siqueira Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_stream.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c index 4f0e7203dba4..470c82794f6f 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c @@ -56,7 +56,7 @@ void update_stream_signal(struct dc_stream_state *stream, struct dc_sink *sink) } } -static void dc_stream_construct(struct dc_stream_state *stream, +static bool dc_stream_construct(struct dc_stream_state *stream, struct dc_sink *dc_sink_data) { uint32_t i = 0; @@ -118,11 +118,17 @@ static void dc_stream_construct(struct dc_stream_state *stream, update_stream_signal(stream, dc_sink_data); stream->out_transfer_func = dc_create_transfer_func(); + if (stream->out_transfer_func == NULL) { + dc_sink_release(dc_sink_data); + return false; + } stream->out_transfer_func->type = TF_TYPE_BYPASS; stream->out_transfer_func->ctx = stream->ctx; stream->stream_id = stream->ctx->dc_stream_id_count; stream->ctx->dc_stream_id_count++; + + return true; } static void dc_stream_destruct(struct dc_stream_state *stream) @@ -164,13 +170,20 @@ struct dc_stream_state *dc_create_stream_for_sink( stream = kzalloc(sizeof(struct dc_stream_state), GFP_KERNEL); if (stream == NULL) - return NULL; + goto alloc_fail; - dc_stream_construct(stream, sink); + if (dc_stream_construct(stream, sink) == false) + goto construct_fail; kref_init(&stream->refcount); return stream; + +construct_fail: + kfree(stream); + +alloc_fail: + return NULL; } struct dc_stream_state *dc_copy_stream(const struct dc_stream_state *stream) -- cgit v1.2.3 From 98a34cf931e848f8489d3fb15a8f5fc03802ad65 Mon Sep 17 00:00:00 2001 From: chen gong Date: Mon, 13 Jul 2020 16:11:24 +0800 Subject: drm/amdgpu/powerplay: Modify SMC message name for setting power profile mode I consulted Cai Land(Chuntian.Cai@amd.com), he told me corresponding smc message name to fSMC_MSG_SetWorkloadMask() is "PPSMC_MSG_ActiveProcessNotify" in firmware code of Renoir. Strange though it may seem, but it's a fact. Signed-off-by: chen gong Reviewed-by: Evan Quan Acked-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/powerplay/renoir_ppt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/renoir_ppt.c b/drivers/gpu/drm/amd/powerplay/renoir_ppt.c index 67476047c067..fbb3f3a0dff7 100644 --- a/drivers/gpu/drm/amd/powerplay/renoir_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/renoir_ppt.c @@ -689,7 +689,7 @@ static int renoir_set_power_profile_mode(struct smu_context *smu, long *input, u return -EINVAL; } - ret = smu_send_smc_msg_with_param(smu, SMU_MSG_SetWorkloadMask, + ret = smu_send_smc_msg_with_param(smu, SMU_MSG_ActiveProcessNotify, 1 << workload_type, NULL); if (ret) { -- cgit v1.2.3 From 05051496b2622e4d12e2036b35165969aa502f89 Mon Sep 17 00:00:00 2001 From: Xiaojie Yuan Date: Tue, 14 Jul 2020 15:47:31 +0800 Subject: drm/amdgpu/sdma5: fix wptr overwritten in ->get_wptr() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit "u64 *wptr" points to the the wptr value in write back buffer and "*wptr = (*wptr) >> 2;" results in the value being overwritten each time when ->get_wptr() is called. umr uses /sys/kernel/debug/dri/0/amdgpu_ring_sdma0 to get rptr/wptr and decode ring content and it is affected by this issue. fix and simplify the logic similar as sdma_v4_0_ring_get_wptr(). v2: fix for sdma5.2 as well v3: drop sdma 5.2 changes for 5.8 and stable Suggested-by: Le Ma Signed-off-by: Xiaojie Yuan Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c | 26 ++++++++------------------ 1 file changed, 8 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c index 5d71c23e2640..8fb66e50a57b 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c @@ -314,30 +314,20 @@ static uint64_t sdma_v5_0_ring_get_rptr(struct amdgpu_ring *ring) static uint64_t sdma_v5_0_ring_get_wptr(struct amdgpu_ring *ring) { struct amdgpu_device *adev = ring->adev; - u64 *wptr = NULL; - uint64_t local_wptr = 0; + u64 wptr; if (ring->use_doorbell) { /* XXX check if swapping is necessary on BE */ - wptr = ((u64 *)&adev->wb.wb[ring->wptr_offs]); - DRM_DEBUG("wptr/doorbell before shift == 0x%016llx\n", *wptr); - *wptr = (*wptr) >> 2; - DRM_DEBUG("wptr/doorbell after shift == 0x%016llx\n", *wptr); + wptr = READ_ONCE(*((u64 *)&adev->wb.wb[ring->wptr_offs])); + DRM_DEBUG("wptr/doorbell before shift == 0x%016llx\n", wptr); } else { - u32 lowbit, highbit; - - wptr = &local_wptr; - lowbit = RREG32(sdma_v5_0_get_reg_offset(adev, ring->me, mmSDMA0_GFX_RB_WPTR)) >> 2; - highbit = RREG32(sdma_v5_0_get_reg_offset(adev, ring->me, mmSDMA0_GFX_RB_WPTR_HI)) >> 2; - - DRM_DEBUG("wptr [%i]high== 0x%08x low==0x%08x\n", - ring->me, highbit, lowbit); - *wptr = highbit; - *wptr = (*wptr) << 32; - *wptr |= lowbit; + wptr = RREG32(sdma_v5_0_get_reg_offset(adev, ring->me, mmSDMA0_GFX_RB_WPTR_HI)); + wptr = wptr << 32; + wptr |= RREG32(sdma_v5_0_get_reg_offset(adev, ring->me, mmSDMA0_GFX_RB_WPTR)); + DRM_DEBUG("wptr before shift [%i] wptr == 0x%016llx\n", ring->me, wptr); } - return *wptr; + return wptr >> 2; } /** -- cgit v1.2.3 From 0cac21b02ba5f3095fd2dcc77c26a25a0b2432ed Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Mon, 6 Jul 2020 14:32:26 +0200 Subject: riscv: use 16KB kernel stack on 64-bit With the current 8KB stack size there are frequent overflows in a 64-bit configuration. We may split IRQ stacks off in the future, but this fixes a number of issues right now. Signed-off-by: Andreas Schwab Reviewed-by: Anup Patel [Palmer: mention irqstack in the commit text] Fixes: 7db91e57a0ac ("RISC-V: Task implementation") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/thread_info.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/riscv/include/asm/thread_info.h b/arch/riscv/include/asm/thread_info.h index 1dd12a0cbb2b..464a2bbc97ea 100644 --- a/arch/riscv/include/asm/thread_info.h +++ b/arch/riscv/include/asm/thread_info.h @@ -12,7 +12,11 @@ #include /* thread information allocation */ +#ifdef CONFIG_64BIT +#define THREAD_SIZE_ORDER (2) +#else #define THREAD_SIZE_ORDER (1) +#endif #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) #ifndef __ASSEMBLY__ -- cgit v1.2.3 From 3195c4706b00106aa82c73acd28340fa8fc2bfc1 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Tue, 14 Jul 2020 13:00:27 +0200 Subject: hippi: Fix a size used in a 'pci_free_consistent()' in an error handling path The size used when calling 'pci_alloc_consistent()' and 'pci_free_consistent()' should match. Fix it and have it consistent with the corresponding call in 'rr_close()'. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller --- drivers/net/hippi/rrunner.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c index 2a6ec5394966..a4b3fce69ecd 100644 --- a/drivers/net/hippi/rrunner.c +++ b/drivers/net/hippi/rrunner.c @@ -1242,7 +1242,7 @@ static int rr_open(struct net_device *dev) rrpriv->info = NULL; } if (rrpriv->rx_ctrl) { - pci_free_consistent(pdev, sizeof(struct ring_ctrl), + pci_free_consistent(pdev, 256 * sizeof(struct ring_ctrl), rrpriv->rx_ctrl, rrpriv->rx_ctrl_dma); rrpriv->rx_ctrl = NULL; } -- cgit v1.2.3 From ff021f22ea8f1388ced048243c6e06ca5cfbd62a Mon Sep 17 00:00:00 2001 From: Maxim Kochetkov Date: Tue, 14 Jul 2020 15:01:04 +0300 Subject: gianfar: Use random MAC address when none is given If there is no valid MAC address in the device tree, use a random MAC address. Signed-off-by: Maxim Kochetkov Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index b3c69e9038ea..b513b8c5c3b5 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -779,8 +779,12 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev) mac_addr = of_get_mac_address(np); - if (!IS_ERR(mac_addr)) + if (!IS_ERR(mac_addr)) { ether_addr_copy(dev->dev_addr, mac_addr); + } else { + eth_hw_addr_random(dev); + dev_info(&ofdev->dev, "Using random MAC address: %pM\n", dev->dev_addr); + } if (model && !strcasecmp(model, "TSEC")) priv->device_flags |= FSL_GIANFAR_DEV_HAS_GIGABIT | -- cgit v1.2.3 From 8a03746c8baf82e1616f05a1a716d34378dcf780 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 14 Jul 2020 14:31:11 -0700 Subject: hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798D Stefan Dietrich reports invalid temperature source messages on Asus Formula XII Z490. nct6775 nct6775.656: Invalid temperature source 28 at index 0, source register 0x100, temp register 0x73 Debugging suggests that temperature source 28 reports the CPU temperature. Let's assume that temperature sources 28 and 29 reflect "PECI Agent {0,1} Calibration", similar to other chips of the series. Reported-by: Stefan Dietrich Cc: Stefan Dietrich Signed-off-by: Guenter Roeck --- drivers/hwmon/nct6775.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index e7e1ddc1d631..750b08713dee 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -786,13 +786,13 @@ static const char *const nct6798_temp_label[] = { "Agent1 Dimm1", "BYTE_TEMP0", "BYTE_TEMP1", - "", - "", + "PECI Agent 0 Calibration", /* undocumented */ + "PECI Agent 1 Calibration", /* undocumented */ "", "Virtual_TEMP" }; -#define NCT6798_TEMP_MASK 0x8fff0ffe +#define NCT6798_TEMP_MASK 0xbfff0ffe #define NCT6798_VIRT_TEMP_MASK 0x80000c00 /* NCT6102D/NCT6106D specific data */ -- cgit v1.2.3 From 651149f60376758a4759f761767965040f9e4464 Mon Sep 17 00:00:00 2001 From: Paolo Pisati Date: Tue, 14 Jul 2020 17:40:55 +0200 Subject: selftests: fib_nexthop_multiprefix: fix cleanup() netns deletion During setup(): ... for ns in h0 r1 h1 h2 h3 do create_ns ${ns} done ... while in cleanup(): ... for n in h1 r1 h2 h3 h4 do ip netns del ${n} 2>/dev/null done ... and after removing the stderr redirection in cleanup(): $ sudo ./fib_nexthop_multiprefix.sh ... TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ] TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ] Cannot remove namespace file "/run/netns/h4": No such file or directory $ echo $? 1 and a non-zero return code, make kselftests fail (even if the test itself is fine): ... not ok 34 selftests: net: fib_nexthop_multiprefix.sh # exit=1 ... Signed-off-by: Paolo Pisati Reviewed-by: David Ahern Signed-off-by: David S. Miller --- tools/testing/selftests/net/fib_nexthop_multiprefix.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/fib_nexthop_multiprefix.sh b/tools/testing/selftests/net/fib_nexthop_multiprefix.sh index 9dc35a16e415..51df5e305855 100755 --- a/tools/testing/selftests/net/fib_nexthop_multiprefix.sh +++ b/tools/testing/selftests/net/fib_nexthop_multiprefix.sh @@ -144,7 +144,7 @@ setup() cleanup() { - for n in h1 r1 h2 h3 h4 + for n in h0 r1 h1 h2 h3 do ip netns del ${n} 2>/dev/null done -- cgit v1.2.3 From 1d61e21852d3161f234b9656797669fe185c251b Mon Sep 17 00:00:00 2001 From: Laurence Oberman Date: Tue, 14 Jul 2020 18:08:05 -0400 Subject: qed: Disable "MFW indication via attention" SPAM every 5 minutes This is likely firmware causing this but its starting to annoy customers. Change the message level to verbose to prevent the spam. Note that this seems to only show up with ISCSI enabled on the HBA via the qedi driver. Signed-off-by: Laurence Oberman Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_int.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c index b7b974f0ef21..7e13a9d9b89c 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_int.c +++ b/drivers/net/ethernet/qlogic/qed/qed_int.c @@ -1193,7 +1193,8 @@ static int qed_int_attentions(struct qed_hwfn *p_hwfn) index, attn_bits, attn_acks, asserted_bits, deasserted_bits, p_sb_attn_sw->known_attn); } else if (asserted_bits == 0x100) { - DP_INFO(p_hwfn, "MFW indication via attention\n"); + DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, + "MFW indication via attention\n"); } else { DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, "MFW indication [deassertion]\n"); -- cgit v1.2.3 From f3d7fb38976b1b0a8462ba1c7cbd404ddfaad086 Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Mon, 15 Jun 2020 16:39:57 -0600 Subject: thermal: int3403_thermal: Downgrade error message Downgrade "Unsupported event" message from dev_err to dev_dbg to avoid flooding with this message on some platforms. Cc: stable@vger.kernel.org # v5.4+ Suggested-by: Zhang Rui Signed-off-by: Alex Hung [ rzhang: fix typo in changelog ] Signed-off-by: Zhang Rui Link: https://lore.kernel.org/r/20200615223957.183153-1-alex.hung@canonical.com --- drivers/thermal/intel/int340x_thermal/int3403_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/intel/int340x_thermal/int3403_thermal.c b/drivers/thermal/intel/int340x_thermal/int3403_thermal.c index f86cbb125e2f..ec1d58c4ceaa 100644 --- a/drivers/thermal/intel/int340x_thermal/int3403_thermal.c +++ b/drivers/thermal/intel/int340x_thermal/int3403_thermal.c @@ -74,7 +74,7 @@ static void int3403_notify(acpi_handle handle, THERMAL_TRIP_CHANGED); break; default: - dev_err(&priv->pdev->dev, "Unsupported event [0x%x]\n", event); + dev_dbg(&priv->pdev->dev, "Unsupported event [0x%x]\n", event); break; } } -- cgit v1.2.3 From a8f62f183021be389561570ab5f8c701a5e70298 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 7 Jul 2020 12:34:12 +0200 Subject: Revert "thermal: mediatek: fix register index error" This reverts commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6 The above patch is supposed to fix a register index error on mt2701. It is not clear if the problem solved is a hang or just an invalid value returned, my guess is the second. The patch introduces, though, a new hang on MT8173 device making them unusable. So, seems reasonable, revert the patch because introduces a worst issue. The reason I send a revert instead of trying to fix the issue for MT8173 is because the information needed to fix the issue is in the datasheet and is not public. So I am not really able to fix it. Fixes the following bug when CONFIG_MTK_THERMAL is set on MT8173 devices. [ 2.222488] Unable to handle kernel paging request at virtual address ffff8000125f5001 [ 2.230421] Mem abort info: [ 2.233207] ESR = 0x96000021 [ 2.236261] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.241571] SET = 0, FnV = 0 [ 2.244623] EA = 0, S1PTW = 0 [ 2.247762] Data abort info: [ 2.250640] ISV = 0, ISS = 0x00000021 [ 2.254473] CM = 0, WnR = 0 [ 2.257544] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041850000 [ 2.264251] [ffff8000125f5001] pgd=000000013ffff003, pud=000000013fffe003, pmd=000000013fff9003, pte=006800001100b707 [ 2.274867] Internal error: Oops: 96000021 [#1] PREEMPT SMP [ 2.280432] Modules linked in: [ 2.283483] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc6+ #162 [ 2.289914] Hardware name: Google Elm (DT) [ 2.294003] pstate: 20000005 (nzCv daif -PAN -UAO) [ 2.298792] pc : mtk_read_temp+0xb8/0x1c8 [ 2.302793] lr : mtk_read_temp+0x7c/0x1c8 [ 2.306794] sp : ffff80001003b930 [ 2.310100] x29: ffff80001003b930 x28: 0000000000000000 [ 2.315404] x27: 0000000000000002 x26: ffff0000f9550b10 [ 2.320709] x25: ffff0000f9550a80 x24: 0000000000000090 [ 2.326014] x23: ffff80001003ba24 x22: 00000000610344c0 [ 2.331318] x21: 0000000000002710 x20: 00000000000001f4 [ 2.336622] x19: 0000000000030d40 x18: ffff800011742ec0 [ 2.341926] x17: 0000000000000001 x16: 0000000000000001 [ 2.347230] x15: ffffffffffffffff x14: ffffff0000000000 [ 2.352535] x13: ffffffffffffffff x12: 0000000000000028 [ 2.357839] x11: 0000000000000003 x10: ffff800011295ec8 [ 2.363143] x9 : 000000000000291b x8 : 0000000000000002 [ 2.368447] x7 : 00000000000000a8 x6 : 0000000000000004 [ 2.373751] x5 : 0000000000000000 x4 : ffff800011295cb0 [ 2.379055] x3 : 0000000000000002 x2 : ffff8000125f5001 [ 2.384359] x1 : 0000000000000001 x0 : ffff0000f9550a80 [ 2.389665] Call trace: [ 2.392105] mtk_read_temp+0xb8/0x1c8 [ 2.395760] of_thermal_get_temp+0x2c/0x40 [ 2.399849] thermal_zone_get_temp+0x78/0x160 [ 2.404198] thermal_zone_device_update.part.0+0x3c/0x1f8 [ 2.409589] thermal_zone_device_update+0x34/0x48 [ 2.414286] of_thermal_set_mode+0x58/0x88 [ 2.418375] thermal_zone_of_sensor_register+0x1a8/0x1d8 [ 2.423679] devm_thermal_zone_of_sensor_register+0x64/0xb0 [ 2.429242] mtk_thermal_probe+0x690/0x7d0 [ 2.433333] platform_drv_probe+0x5c/0xb0 [ 2.437335] really_probe+0xe4/0x448 [ 2.440901] driver_probe_device+0xe8/0x140 [ 2.445077] device_driver_attach+0x7c/0x88 [ 2.449252] __driver_attach+0xac/0x178 [ 2.453082] bus_for_each_dev+0x78/0xc8 [ 2.456909] driver_attach+0x2c/0x38 [ 2.460476] bus_add_driver+0x14c/0x230 [ 2.464304] driver_register+0x6c/0x128 [ 2.468131] __platform_driver_register+0x50/0x60 [ 2.472831] mtk_thermal_driver_init+0x24/0x30 [ 2.477268] do_one_initcall+0x50/0x298 [ 2.481098] kernel_init_freeable+0x1ec/0x264 [ 2.485450] kernel_init+0x1c/0x110 [ 2.488931] ret_from_fork+0x10/0x1c [ 2.492502] Code: f9401081 f9400402 b8a67821 8b010042 (b9400042) [ 2.498599] ---[ end trace e43e3105ed27dc99 ]--- [ 2.503367] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.511020] SMP: stopping secondary CPUs [ 2.514941] Kernel Offset: disabled [ 2.518421] CPU features: 0x090002,25006005 [ 2.522595] Memory Limit: none [ 2.525644] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]-- Cc: Michael Kao Fixes: eb9aecd90d1a ("thermal: mediatek: fix register index error") Signed-off-by: Enric Balletbo i Serra Reviewed-by: Matthias Brugger Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200707103412.1010823-1-enric.balletbo@collabora.com --- drivers/thermal/mtk_thermal.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 76e30603d4d5..1ac13a5101b8 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -591,8 +591,7 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) u32 raw; for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { - raw = readl(mt->thermal_base + - conf->msr[conf->bank_data[bank->id].sensors[i]]); + raw = readl(mt->thermal_base + conf->msr[i]); temp = raw_to_mcelsius(mt, conf->bank_data[bank->id].sensors[i], @@ -733,8 +732,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, for (i = 0; i < conf->bank_data[num].num_sensors; i++) writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]], - mt->thermal_base + - conf->adcpnp[conf->bank_data[num].sensors[i]]); + mt->thermal_base + conf->adcpnp[i]); writel((1 << conf->bank_data[num].num_sensors) - 1, controller_base + TEMP_MONCTL0); -- cgit v1.2.3 From e2e90804dc1c190dcc00e4ca481bfd847ee5efcd Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 15 Jul 2020 12:40:07 +0300 Subject: platform/x86: thinkpad_acpi: Revert "Use strndup_user() in dispatch_proc_write()" This reverts commit 35d13c7a05126a5a54a1ef40aff4c6984474e604. This broke procfs interface due to neglecting the fact that the strings are not coming NULL terminated. Revert the change till we will have a better clean up. Fixes: 35d13c7a0512 ("platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()") Reported-by: Hans de Goede Signed-off-by: Andy Shevchenko --- drivers/platform/x86/thinkpad_acpi.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index ff7f0a4f2475..0f6fceda5fc0 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -885,11 +885,19 @@ static ssize_t dispatch_proc_write(struct file *file, if (!ibm || !ibm->write) return -EINVAL; + if (count > PAGE_SIZE - 1) + return -EINVAL; + + kernbuf = kmalloc(count + 1, GFP_KERNEL); + if (!kernbuf) + return -ENOMEM; - kernbuf = strndup_user(userbuf, PAGE_SIZE); - if (IS_ERR(kernbuf)) - return PTR_ERR(kernbuf); + if (copy_from_user(kernbuf, userbuf, count)) { + kfree(kernbuf); + return -EFAULT; + } + kernbuf[count] = 0; ret = ibm->write(kernbuf); if (ret == 0) ret = count; -- cgit v1.2.3 From e1eea3f839f41368d7cb4eb2d872d5b288677e94 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Wed, 24 Jun 2020 10:51:38 -0700 Subject: platform/x86: ISST: Add new PCI device ids Added new PCI device ids for supporting mailbox and MMIO interface for Sapphire Rapids. Signed-off-by: Srinivas Pandruvada Signed-off-by: Andy Shevchenko --- drivers/platform/x86/intel_speed_select_if/isst_if_common.h | 3 +++ drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c | 1 + drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c | 1 + 3 files changed, 5 insertions(+) diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h b/drivers/platform/x86/intel_speed_select_if/isst_if_common.h index 1409a5bb5582..4f6f7f0761fc 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h +++ b/drivers/platform/x86/intel_speed_select_if/isst_if_common.h @@ -13,6 +13,9 @@ #define INTEL_RAPL_PRIO_DEVID_0 0x3451 #define INTEL_CFG_MBOX_DEVID_0 0x3459 +#define INTEL_RAPL_PRIO_DEVID_1 0x3251 +#define INTEL_CFG_MBOX_DEVID_1 0x3259 + /* * Validate maximum commands in a single request. * This is enough to handle command to every core in one ioctl, or all diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c b/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c index d84e2174cbde..95f01e7a87d5 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c +++ b/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c @@ -147,6 +147,7 @@ static long isst_if_mbox_proc_cmd(u8 *cmd_ptr, int *write_only, int resume) static const struct pci_device_id isst_if_mbox_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_CFG_MBOX_DEVID_0)}, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_CFG_MBOX_DEVID_1)}, { 0 }, }; MODULE_DEVICE_TABLE(pci, isst_if_mbox_ids); diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c index 3584859fcc42..aa17fd7817f8 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c +++ b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c @@ -72,6 +72,7 @@ static long isst_if_mmio_rd_wr(u8 *cmd_ptr, int *write_only, int resume) static const struct pci_device_id isst_if_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_0)}, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_1)}, { 0 }, }; MODULE_DEVICE_TABLE(pci, isst_if_ids); -- cgit v1.2.3 From 9a33e375d98ece5ea40c576eabd3257acb90c509 Mon Sep 17 00:00:00 2001 From: Vasiliy Kupriakov Date: Tue, 30 Jun 2020 20:56:01 +0300 Subject: platform/x86: asus-wmi: allow BAT1 battery name The battery on my laptop ASUS TUF Gaming FX706II is named BAT1. This patch allows battery extension to load. Signed-off-by: Vasiliy Kupriakov Signed-off-by: Andy Shevchenko --- drivers/platform/x86/asus-wmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 877aade19497..8f4acdc06b13 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -441,6 +441,7 @@ static int asus_wmi_battery_add(struct power_supply *battery) * battery is named BATT. */ if (strcmp(battery->desc->name, "BAT0") != 0 && + strcmp(battery->desc->name, "BAT1") != 0 && strcmp(battery->desc->name, "BATT") != 0) return -ENODEV; -- cgit v1.2.3 From 31070f6ccec09f3bd4f1e28cd1e592fa4f3ba0b6 Mon Sep 17 00:00:00 2001 From: Chirantan Ekbote Date: Tue, 14 Jul 2020 19:26:39 +0900 Subject: fuse: Fix parameter for FS_IOC_{GET,SET}FLAGS The ioctl encoding for this parameter is a long but the documentation says it should be an int and the kernel drivers expect it to be an int. If the fuse driver treats this as a long it might end up scribbling over the stack of a userspace process that only allocated enough space for an int. This was previously discussed in [1] and a patch for fuse was proposed in [2]. From what I can tell the patch in [2] was nacked in favor of adding new, "fixed" ioctls and using those from userspace. However there is still no "fixed" version of these ioctls and the fact is that it's sometimes infeasible to change all userspace to use the new one. Handling the ioctls specially in the fuse driver seems like the most pragmatic way for fuse servers to support them without causing crashes in userspace applications that call them. [1]: https://lore.kernel.org/linux-fsdevel/20131126200559.GH20559@hall.aurel32.net/T/ [2]: https://sourceforge.net/p/fuse/mailman/message/31771759/ Signed-off-by: Chirantan Ekbote Fixes: 59efec7b9039 ("fuse: implement ioctl support") Cc: Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 9895ce2d7023..83d917f7e542 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -18,6 +18,7 @@ #include #include #include +#include static struct page **fuse_pages_alloc(unsigned int npages, gfp_t flags, struct fuse_page_desc **desc) @@ -2775,7 +2776,16 @@ long fuse_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg, struct iovec *iov = iov_page; iov->iov_base = (void __user *)arg; - iov->iov_len = _IOC_SIZE(cmd); + + switch (cmd) { + case FS_IOC_GETFLAGS: + case FS_IOC_SETFLAGS: + iov->iov_len = sizeof(int); + break; + default: + iov->iov_len = _IOC_SIZE(cmd); + break; + } if (_IOC_DIR(cmd) & _IOC_WRITE) { in_iov = iov; -- cgit v1.2.3 From 6068e1a4427e88f5cc62f238d1baf94a8b824ef4 Mon Sep 17 00:00:00 2001 From: Haren Myneni Date: Fri, 10 Jul 2020 16:47:19 -0700 Subject: powerpc/vas: Report proper error code for address translation failure P9 DD2 NX workbook (Table 4-36) says DMA controller uses CC=5 internally for translation fault handling. NX reserves CC=250 for OS to notify user space when NX encounters address translation failure on the request buffer. Not an issue in earlier releases as NX does not get faults on kernel addresses. This patch defines CSB_CC_FAULT_ADDRESS(250) and updates CSB.CC with this proper error code for user space. Fixes: c96c4436aba4 ("powerpc/vas: Update CSB and notify process for fault CRBs") Signed-off-by: Haren Myneni [mpe: Added Fixes tag and fix typo in comment] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/019fd53e7538c6f8f332d175df74b1815ef5aa8c.camel@linux.ibm.com --- Documentation/powerpc/vas-api.rst | 2 +- arch/powerpc/include/asm/icswx.h | 2 ++ arch/powerpc/platforms/powernv/vas-fault.c | 2 +- 3 files changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/powerpc/vas-api.rst b/Documentation/powerpc/vas-api.rst index 1217c2f1595e..788dc8375a0e 100644 --- a/Documentation/powerpc/vas-api.rst +++ b/Documentation/powerpc/vas-api.rst @@ -213,7 +213,7 @@ request buffers are not in memory. The operating system handles the fault by updating CSB with the following data: csb.flags = CSB_V; - csb.cc = CSB_CC_TRANSLATION; + csb.cc = CSB_CC_FAULT_ADDRESS; csb.ce = CSB_CE_TERMINATION; csb.address = fault_address; diff --git a/arch/powerpc/include/asm/icswx.h b/arch/powerpc/include/asm/icswx.h index 965b1f39b2a5..b0c70a35fd0e 100644 --- a/arch/powerpc/include/asm/icswx.h +++ b/arch/powerpc/include/asm/icswx.h @@ -77,6 +77,8 @@ struct coprocessor_completion_block { #define CSB_CC_CHAIN (37) #define CSB_CC_SEQUENCE (38) #define CSB_CC_HW (39) +/* P9 DD2 NX Workbook 3.2 (Table 4-36): Address translation fault */ +#define CSB_CC_FAULT_ADDRESS (250) #define CSB_SIZE (0x10) #define CSB_ALIGN CSB_SIZE diff --git a/arch/powerpc/platforms/powernv/vas-fault.c b/arch/powerpc/platforms/powernv/vas-fault.c index 266a6ca5e15e..3d21fce254b7 100644 --- a/arch/powerpc/platforms/powernv/vas-fault.c +++ b/arch/powerpc/platforms/powernv/vas-fault.c @@ -79,7 +79,7 @@ static void update_csb(struct vas_window *window, csb_addr = (void __user *)be64_to_cpu(crb->csb_addr); memset(&csb, 0, sizeof(csb)); - csb.cc = CSB_CC_TRANSLATION; + csb.cc = CSB_CC_FAULT_ADDRESS; csb.ce = CSB_CE_TERMINATION; csb.cs = 0; csb.count = 0; -- cgit v1.2.3 From f0479c4bcbd92d1a457d4a43bcab79f29d11334a Mon Sep 17 00:00:00 2001 From: Haren Myneni Date: Fri, 10 Jul 2020 16:49:58 -0700 Subject: selftests/powerpc: Use proper error code to check fault address ERR_NX_TRANSLATION(CSB.CC=5) is for internal to VAS for fault handling and should not used by OS. ERR_NX_AT_FAULT(CSB.CC=250) is the proper error code should be reported by OS when NX encounters address translation failure. This patch uses CC=250 to determine the fault address when the request is not successful. Signed-off-by: Haren Myneni Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/0315251705baff94f678c33178491b5008723511.camel@linux.ibm.com --- tools/testing/selftests/powerpc/nx-gzip/gunz_test.c | 4 ++-- tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/powerpc/nx-gzip/gunz_test.c b/tools/testing/selftests/powerpc/nx-gzip/gunz_test.c index 6ee0fded0391..7c23d3dd7d6d 100644 --- a/tools/testing/selftests/powerpc/nx-gzip/gunz_test.c +++ b/tools/testing/selftests/powerpc/nx-gzip/gunz_test.c @@ -698,13 +698,13 @@ restart_nx: switch (cc) { - case ERR_NX_TRANSLATION: + case ERR_NX_AT_FAULT: /* We touched the pages ahead of time. In the most common case * we shouldn't be here. But may be some pages were paged out. * Kernel should have placed the faulting address to fsaddr. */ - NXPRT(fprintf(stderr, "ERR_NX_TRANSLATION %p\n", + NXPRT(fprintf(stderr, "ERR_NX_AT_FAULT %p\n", (void *)cmdp->crb.csb.fsaddr)); if (pgfault_retries == NX_MAX_FAULTS) { diff --git a/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c b/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c index 7496a83f9c9d..02dffb65de48 100644 --- a/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c +++ b/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c @@ -306,13 +306,13 @@ int compress_file(int argc, char **argv, void *handle) lzcounts, cmdp, handle); if (cc != ERR_NX_OK && cc != ERR_NX_TPBC_GT_SPBC && - cc != ERR_NX_TRANSLATION) { + cc != ERR_NX_AT_FAULT) { fprintf(stderr, "nx error: cc= %d\n", cc); exit(-1); } /* Page faults are handled by the user code */ - if (cc == ERR_NX_TRANSLATION) { + if (cc == ERR_NX_AT_FAULT) { NXPRT(fprintf(stderr, "page fault: cc= %d, ", cc)); NXPRT(fprintf(stderr, "try= %d, fsa= %08llx\n", fault_tries, -- cgit v1.2.3 From 3ce17cd2b94907f6d91b81b32848044b84c97606 Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Wed, 15 Jul 2020 13:13:38 +0100 Subject: hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe() SMATCH detected a potential buffer overflow in the manipulation of hwmon_attributes array inside the scmi_hwmon_probe function: drivers/hwmon/scmi-hwmon.c:226 scmi_hwmon_probe() error: buffer overflow 'hwmon_attributes' 6 <= 9 Fix it by statically declaring the size of the array as the maximum possible as defined by hwmon_max define. Signed-off-by: Cristian Marussi Reviewed-by: Sudeep Holla Link: https://lore.kernel.org/r/20200715121338.GA18761@e119603-lin.cambridge.arm.com Signed-off-by: Guenter Roeck --- drivers/hwmon/scmi-hwmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c index 286d3cfda7de..d421e691318b 100644 --- a/drivers/hwmon/scmi-hwmon.c +++ b/drivers/hwmon/scmi-hwmon.c @@ -147,7 +147,7 @@ static enum hwmon_sensor_types scmi_types[] = { [ENERGY] = hwmon_energy, }; -static u32 hwmon_attributes[] = { +static u32 hwmon_attributes[hwmon_max] = { [hwmon_chip] = HWMON_C_REGISTER_TZ, [hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL, [hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL, -- cgit v1.2.3 From 912288442cb2f431bf3c8cb097a5de83bc6dbac1 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 15 Jul 2020 17:26:04 +0100 Subject: xprtrdma: fix incorrect header size calculations Currently the header size calculations are using an assignment operator instead of a += operator when accumulating the header size leading to incorrect sizes. Fix this by using the correct operator. Addresses-Coverity: ("Unused value") Fixes: 302d3deb2068 ("xprtrdma: Prevent inline overflow") Signed-off-by: Colin Ian King Reviewed-by: Chuck Lever Signed-off-by: Anna Schumaker --- net/sunrpc/xprtrdma/rpc_rdma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c index 935bbef2f7be..453bacc99907 100644 --- a/net/sunrpc/xprtrdma/rpc_rdma.c +++ b/net/sunrpc/xprtrdma/rpc_rdma.c @@ -71,7 +71,7 @@ static unsigned int rpcrdma_max_call_header_size(unsigned int maxsegs) size = RPCRDMA_HDRLEN_MIN; /* Maximum Read list size */ - size = maxsegs * rpcrdma_readchunk_maxsz * sizeof(__be32); + size += maxsegs * rpcrdma_readchunk_maxsz * sizeof(__be32); /* Minimal Read chunk size */ size += sizeof(__be32); /* segment count */ @@ -94,7 +94,7 @@ static unsigned int rpcrdma_max_reply_header_size(unsigned int maxsegs) size = RPCRDMA_HDRLEN_MIN; /* Maximum Write list size */ - size = sizeof(__be32); /* segment count */ + size += sizeof(__be32); /* segment count */ size += maxsegs * rpcrdma_segment_maxsz * sizeof(__be32); size += sizeof(__be32); /* list discriminator */ -- cgit v1.2.3 From 1e9451cbda456a170518b2bfd643e2cb980880bf Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 14 Jul 2020 18:51:39 +0200 Subject: netfilter: nf_tables: fix nat hook table deletion sybot came up with following transaction: add table ip syz0 add chain ip syz0 syz2 { type nat hook prerouting priority 0; policy accept; } add table ip syz0 { flags dormant; } delete chain ip syz0 syz2 delete table ip syz0 which yields: hook not found, pf 2 num 0 WARNING: CPU: 0 PID: 6775 at net/netfilter/core.c:413 __nf_unregister_net_hook+0x3e6/0x4a0 net/netfilter/core.c:413 [..] nft_unregister_basechain_hooks net/netfilter/nf_tables_api.c:206 [inline] nft_table_disable net/netfilter/nf_tables_api.c:835 [inline] nf_tables_table_disable net/netfilter/nf_tables_api.c:868 [inline] nf_tables_commit+0x32d3/0x4d70 net/netfilter/nf_tables_api.c:7550 nfnetlink_rcv_batch net/netfilter/nfnetlink.c:486 [inline] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:544 [inline] nfnetlink_rcv+0x14a5/0x1e50 net/netfilter/nfnetlink.c:562 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] Problem is that when I added ability to override base hook registration to make nat basechains register with the nat core instead of netfilter core, I forgot to update nft_table_disable() to use that instead of the 'raw' hook register interface. In syzbot transaction, the basechain is of 'nat' type. Its registered with the nat core. The switch to 'dormant mode' attempts to delete from netfilter core instead. After updating nft_table_disable/enable to use the correct helper, nft_(un)register_basechain_hooks can be folded into the only remaining caller. Because nft_trans_table_enable() won't do anything when the DORMANT flag is set, remove the flag first, then re-add it in case re-enablement fails, else this patch breaks sequence: add table ip x { flags dormant; } /* add base chains */ add table ip x The last 'add' will remove the dormant flags, but won't have any other effect -- base chains are not registered. Then, next 'set dormant flag' will create another 'hook not found' splat. Reported-by: syzbot+2570f2c036e3da5db176@syzkaller.appspotmail.com Fixes: 4e25ceb80b58 ("netfilter: nf_tables: allow chain type to override hook register") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 41 ++++++++++++++--------------------------- 1 file changed, 14 insertions(+), 27 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 7647ecfa0d40..88325b264737 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -188,24 +188,6 @@ static void nft_netdev_unregister_hooks(struct net *net, nf_unregister_net_hook(net, &hook->ops); } -static int nft_register_basechain_hooks(struct net *net, int family, - struct nft_base_chain *basechain) -{ - if (family == NFPROTO_NETDEV) - return nft_netdev_register_hooks(net, &basechain->hook_list); - - return nf_register_net_hook(net, &basechain->ops); -} - -static void nft_unregister_basechain_hooks(struct net *net, int family, - struct nft_base_chain *basechain) -{ - if (family == NFPROTO_NETDEV) - nft_netdev_unregister_hooks(net, &basechain->hook_list); - else - nf_unregister_net_hook(net, &basechain->ops); -} - static int nf_tables_register_hook(struct net *net, const struct nft_table *table, struct nft_chain *chain) @@ -223,7 +205,10 @@ static int nf_tables_register_hook(struct net *net, if (basechain->type->ops_register) return basechain->type->ops_register(net, ops); - return nft_register_basechain_hooks(net, table->family, basechain); + if (table->family == NFPROTO_NETDEV) + return nft_netdev_register_hooks(net, &basechain->hook_list); + + return nf_register_net_hook(net, &basechain->ops); } static void nf_tables_unregister_hook(struct net *net, @@ -242,7 +227,10 @@ static void nf_tables_unregister_hook(struct net *net, if (basechain->type->ops_unregister) return basechain->type->ops_unregister(net, ops); - nft_unregister_basechain_hooks(net, table->family, basechain); + if (table->family == NFPROTO_NETDEV) + nft_netdev_unregister_hooks(net, &basechain->hook_list); + else + nf_unregister_net_hook(net, &basechain->ops); } static int nft_trans_table_add(struct nft_ctx *ctx, int msg_type) @@ -832,8 +820,7 @@ static void nft_table_disable(struct net *net, struct nft_table *table, u32 cnt) if (cnt && i++ == cnt) break; - nft_unregister_basechain_hooks(net, table->family, - nft_base_chain(chain)); + nf_tables_unregister_hook(net, table, chain); } } @@ -848,8 +835,7 @@ static int nf_tables_table_enable(struct net *net, struct nft_table *table) if (!nft_is_base_chain(chain)) continue; - err = nft_register_basechain_hooks(net, table->family, - nft_base_chain(chain)); + err = nf_tables_register_hook(net, table, chain); if (err < 0) goto err_register_hooks; @@ -894,11 +880,12 @@ static int nf_tables_updtable(struct nft_ctx *ctx) nft_trans_table_enable(trans) = false; } else if (!(flags & NFT_TABLE_F_DORMANT) && ctx->table->flags & NFT_TABLE_F_DORMANT) { + ctx->table->flags &= ~NFT_TABLE_F_DORMANT; ret = nf_tables_table_enable(ctx->net, ctx->table); - if (ret >= 0) { - ctx->table->flags &= ~NFT_TABLE_F_DORMANT; + if (ret >= 0) nft_trans_table_enable(trans) = true; - } + else + ctx->table->flags |= NFT_TABLE_F_DORMANT; } if (ret < 0) goto err; -- cgit v1.2.3 From 60176e6be0bb6f629b15aea7dcab5a95ecb158e9 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 29 Jun 2020 11:19:21 -0500 Subject: arm64: dts: agilex: add status to qspi dts node Add status = "okay" to QSPI node. Fixes: c4c8757b2d895 ("arm64: dts: agilex: add QSPI support for Intel Agilex") Cc: linux-stable # >= v5.5 Signed-off-by: Dinh Nguyen --- arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts index 51d948323bfd..92f478def723 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -98,6 +98,7 @@ }; &qspi { + status = "okay"; flash@0 { #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 263a0269a59c0b4145829462a107fe7f7327105f Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 29 Jun 2020 11:25:43 -0500 Subject: arm64: dts: stratix10: add status to qspi dts node Add status = "okay" to QSPI node. Fixes: 0cb140d07fc75 ("arm64: dts: stratix10: Add QSPI support for Stratix10") Cc: linux-stable # >= v5.6 Signed-off-by: Dinh Nguyen --- arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 1 + arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index f6c4a15079d3..feadd21bc0dc 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -155,6 +155,7 @@ }; &qspi { + status = "okay"; flash@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts index 9946515b8afd..4000c393243d 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts @@ -188,6 +188,7 @@ }; &qspi { + status = "okay"; flash@0 { #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 3bf9b8ffc8980c1090bdd3a5570cf42420620838 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 29 Jun 2020 12:47:35 -0500 Subject: arm64: dts: stratix10: increase QSPI reg address in nand dts file Match the QSPI reg address in the socfpga_stratix10_socdk.dts file. Fixes: 80f132d73709 ("arm64: dts: increase the QSPI reg address for Stratix10 and Agilex") Cc: linux-stable # >= v5.6 Signed-off-by: Dinh Nguyen --- arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts index 4000c393243d..c07966740e14 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts @@ -212,12 +212,12 @@ qspi_boot: partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x034B0000>; + reg = <0x0 0x03FE0000>; }; - qspi_rootfs: partition@4000000 { + qspi_rootfs: partition@3FE0000 { label = "Root Filesystem - JFFS2"; - reg = <0x034B0000 0x0EB50000>; + reg = <0x03FE0000 0x0C020000>; }; }; }; -- cgit v1.2.3 From d7adfe5ffed9faa05f8926223086b101e14f700d Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 26 Jun 2020 10:06:02 +0200 Subject: ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema Fix dtschema validator warnings like: l2-cache@fffff000: $nodename:0: 'l2-cache@fffff000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Fixes: 475dc86d08de ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 2 +- arch/arm/boot/dts/socfpga_arria10.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index c2b54af417a2..78f3267d9cbf 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -726,7 +726,7 @@ }; }; - L2: l2-cache@fffef000 { + L2: cache-controller@fffef000 { compatible = "arm,pl310-cache"; reg = <0xfffef000 0x1000>; interrupts = <0 38 0x04>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 3b8571b8b412..8f614c4b0e3e 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -636,7 +636,7 @@ reg = <0xffcfb100 0x80>; }; - L2: l2-cache@fffff000 { + L2: cache-controller@fffff000 { compatible = "arm,pl310-cache"; reg = <0xfffff000 0x1000>; interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; -- cgit v1.2.3 From 681a5c71fb829fc2193e3bb524af41525477f5c3 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 29 Jun 2020 10:16:29 +0200 Subject: arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema Fix dtschema validator warnings like: intc@fffc1000: $nodename:0: 'intc@fffc1000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Dinh Nguyen --- arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index d1fc9c2055f4..9498d1de730c 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -77,7 +77,7 @@ method = "smc"; }; - intc: intc@fffc1000 { + intc: interrupt-controller@fffc1000 { compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -302,7 +302,7 @@ status = "disabled"; }; - nand: nand@ffb90000 { + nand: nand-controller@ffb90000 { #address-cells = <1>; #size-cells = <0>; compatible = "altr,socfpga-denali-nand"; @@ -445,7 +445,7 @@ clock-names = "timer"; }; - uart0: serial0@ffc02000 { + uart0: serial@ffc02000 { compatible = "snps,dw-apb-uart"; reg = <0xffc02000 0x100>; interrupts = <0 108 4>; @@ -456,7 +456,7 @@ status = "disabled"; }; - uart1: serial1@ffc02100 { + uart1: serial@ffc02100 { compatible = "snps,dw-apb-uart"; reg = <0xffc02100 0x100>; interrupts = <0 109 4>; -- cgit v1.2.3 From 681fda8d27a66f7e65ff7f2d200d7635e64a8d05 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Wed, 15 Jul 2020 22:20:45 +0300 Subject: io_uring: fix recvmsg memory leak with buffer selection io_recvmsg() doesn't free memory allocated for struct io_buffer. This can causes a leak when used with automatic buffer selection. Signed-off-by: Pavel Begunkov Signed-off-by: Jens Axboe --- fs/io_uring.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 9fd7e69696c3..74bc4a04befa 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -3845,10 +3845,16 @@ static int io_recvmsg(struct io_kiocb *req, bool force_nonblock) ret = __sys_recvmsg_sock(sock, &kmsg->msg, req->sr_msg.msg, kmsg->uaddr, flags); - if (force_nonblock && ret == -EAGAIN) - return io_setup_async_msg(req, kmsg); + if (force_nonblock && ret == -EAGAIN) { + ret = io_setup_async_msg(req, kmsg); + if (ret != -EAGAIN) + kfree(kbuf); + return ret; + } if (ret == -ERESTARTSYS) ret = -EINTR; + if (kbuf) + kfree(kbuf); } if (kmsg && kmsg->iov != kmsg->fast_iov) -- cgit v1.2.3 From 07d3f04550023395bbf34b99ec7e00fc50d9859f Mon Sep 17 00:00:00 2001 From: Chandrakanth Patil Date: Wed, 15 Jul 2020 17:31:53 +0530 Subject: scsi: megaraid_sas: Remove undefined ENABLE_IRQ_POLL macro As the ENABLE_IRQ_POLL macro is undefined, the check for ENABLE_IRQ_POLL macro in ISR will always be false. This leads to irq polling being non-functional. Remove ENABLE_IRQ_POLL check from ISR. Link: https://lore.kernel.org/r/20200715120153.20512-1-chandrakanth.patil@broadcom.com Fixes: a6ffd5bf6819 ("scsi: megaraid_sas: Call disable_irq from process IRQ") Cc: # v5.3+ Signed-off-by: Chandrakanth Patil Signed-off-by: Kashyap Desai Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas_fusion.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 319f241da4b6..fcf03f733e41 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -3739,10 +3739,8 @@ static irqreturn_t megasas_isr_fusion(int irq, void *devp) if (instance->mask_interrupts) return IRQ_NONE; -#if defined(ENABLE_IRQ_POLL) if (irq_context->irq_poll_scheduled) return IRQ_HANDLED; -#endif if (!instance->msix_vectors) { mfiStatus = instance->instancet->clear_intr(instance); -- cgit v1.2.3 From 24f14009b8f1754ec2ae4c168940c01259b0f88a Mon Sep 17 00:00:00 2001 From: youngjun Date: Tue, 16 Jun 2020 17:30:43 +0900 Subject: ovl: inode reference leak in ovl_is_inuse true case. When "ovl_is_inuse" true case, trap inode reference not put. plus adding the comment explaining sequence of ovl_is_inuse after ovl_setup_trap. Fixes: 0be0bfd2de9d ("ovl: fix regression caused by overlapping layers detection") Cc: # v4.19+ Reviewed-by: Amir Goldstein Signed-off-by: youngjun Signed-off-by: Miklos Szeredi --- fs/overlayfs/super.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c index 91476bc422f9..498d49d5dd19 100644 --- a/fs/overlayfs/super.c +++ b/fs/overlayfs/super.c @@ -1493,14 +1493,23 @@ static int ovl_get_layers(struct super_block *sb, struct ovl_fs *ofs, if (err < 0) goto out; + /* + * Check if lower root conflicts with this overlay layers before + * checking if it is in-use as upperdir/workdir of "another" + * mount, because we do not bother to check in ovl_is_inuse() if + * the upperdir/workdir is in fact in-use by our + * upperdir/workdir. + */ err = ovl_setup_trap(sb, stack[i].dentry, &trap, "lowerdir"); if (err) goto out; if (ovl_is_inuse(stack[i].dentry)) { err = ovl_report_in_use(ofs, "lowerdir"); - if (err) + if (err) { + iput(trap); goto out; + } } mnt = clone_private_mount(&stack[i]); -- cgit v1.2.3 From 5ac8e8025aedd2ea832ae3fe3ca0f920697f45c7 Mon Sep 17 00:00:00 2001 From: youngjun Date: Sun, 21 Jun 2020 07:30:59 -0700 Subject: ovl: change ovl_copy_up_flags static "ovl_copy_up_flags" is used in copy_up.c. so, change it static. Signed-off-by: youngjun Signed-off-by: Miklos Szeredi --- fs/overlayfs/copy_up.c | 2 +- fs/overlayfs/overlayfs.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c index 79dd052c7dbf..5e0cde85bd6b 100644 --- a/fs/overlayfs/copy_up.c +++ b/fs/overlayfs/copy_up.c @@ -895,7 +895,7 @@ static int ovl_copy_up_one(struct dentry *parent, struct dentry *dentry, return err; } -int ovl_copy_up_flags(struct dentry *dentry, int flags) +static int ovl_copy_up_flags(struct dentry *dentry, int flags) { int err = 0; const struct cred *old_cred = ovl_override_creds(dentry->d_sb); diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h index b725c7f15ff4..29bc1ec699e7 100644 --- a/fs/overlayfs/overlayfs.h +++ b/fs/overlayfs/overlayfs.h @@ -483,7 +483,6 @@ void ovl_aio_request_cache_destroy(void); /* copy_up.c */ int ovl_copy_up(struct dentry *dentry); int ovl_copy_up_with_data(struct dentry *dentry); -int ovl_copy_up_flags(struct dentry *dentry, int flags); int ovl_maybe_copy_up(struct dentry *dentry, int flags); int ovl_copy_xattr(struct dentry *old, struct dentry *new); int ovl_set_attr(struct dentry *upper, struct kstat *stat); -- cgit v1.2.3 From d78a0dcf64cb94ffdd5253722caed3f044a92a78 Mon Sep 17 00:00:00 2001 From: youngjun Date: Sun, 21 Jun 2020 05:50:01 -0700 Subject: ovl: remove not used argument in ovl_check_origin ovl_check_origin outparam 'ctrp' argument not used by caller. So remove this argument. Signed-off-by: youngjun Reviewed-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/overlayfs/namei.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/fs/overlayfs/namei.c b/fs/overlayfs/namei.c index 3566282a9199..3cad68c3efb2 100644 --- a/fs/overlayfs/namei.c +++ b/fs/overlayfs/namei.c @@ -389,7 +389,7 @@ invalid: } static int ovl_check_origin(struct ovl_fs *ofs, struct dentry *upperdentry, - struct ovl_path **stackp, unsigned int *ctrp) + struct ovl_path **stackp) { struct ovl_fh *fh = ovl_get_fh(upperdentry, OVL_XATTR_ORIGIN); int err; @@ -406,10 +406,6 @@ static int ovl_check_origin(struct ovl_fs *ofs, struct dentry *upperdentry, return err; } - if (WARN_ON(*ctrp)) - return -EIO; - - *ctrp = 1; return 0; } @@ -861,8 +857,6 @@ struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry, goto out; } if (upperdentry && !d.is_dir) { - unsigned int origin_ctr = 0; - /* * Lookup copy up origin by decoding origin file handle. * We may get a disconnected dentry, which is fine, @@ -873,8 +867,7 @@ struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry, * number - it's the same as if we held a reference * to a dentry in lower layer that was moved under us. */ - err = ovl_check_origin(ofs, upperdentry, &origin_path, - &origin_ctr); + err = ovl_check_origin(ofs, upperdentry, &origin_path); if (err) goto out_put_upper; -- cgit v1.2.3 From 124c2de2c0aee96271e4ddab190083d8aa7aa71a Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Wed, 17 Jun 2020 09:57:11 +0300 Subject: ovl: relax WARN_ON() when decoding lower directory file handle Decoding a lower directory file handle to overlay path with cold inode/dentry cache may go as follows: 1. Decode real lower file handle to lower dir path 2. Check if lower dir is indexed (was copied up) 3. If indexed, get the upper dir path from index 4. Lookup upper dir path in overlay 5. If overlay path found, verify that overlay lower is the lower dir from step 1 On failure to verify step 5 above, user will get an ESTALE error and a WARN_ON will be printed. A mismatch in step 5 could be a result of lower directory that was renamed while overlay was offline, after that lower directory has been copied up and indexed. This is a scripted reproducer based on xfstest overlay/052: # Create lower subdir create_dirs create_test_files $lower/lowertestdir/subdir mount_dirs # Copy up lower dir and encode lower subdir file handle touch $SCRATCH_MNT/lowertestdir test_file_handles $SCRATCH_MNT/lowertestdir/subdir -p -o $tmp.fhandle # Rename lower dir offline unmount_dirs mv $lower/lowertestdir $lower/lowertestdir.new/ mount_dirs # Attempt to decode lower subdir file handle test_file_handles $SCRATCH_MNT -p -i $tmp.fhandle Since this WARN_ON() can be triggered by user we need to relax it. Fixes: 4b91c30a5a19 ("ovl: lookup connected ancestor of dir in inode cache") Cc: # v4.16+ Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/overlayfs/export.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/overlayfs/export.c b/fs/overlayfs/export.c index 8f4286450f92..0e696f72cf65 100644 --- a/fs/overlayfs/export.c +++ b/fs/overlayfs/export.c @@ -476,7 +476,7 @@ static struct dentry *ovl_lookup_real_inode(struct super_block *sb, if (IS_ERR_OR_NULL(this)) return this; - if (WARN_ON(ovl_dentry_real_at(this, layer->idx) != real)) { + if (ovl_dentry_real_at(this, layer->idx) != real) { dput(this); this = ERR_PTR(-EIO); } -- cgit v1.2.3 From 20396365a16dae4b4e3967fc7115d5336feb30ee Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Sun, 21 Jun 2020 09:37:59 +0300 Subject: ovl: fix oops in ovl_indexdir_cleanup() with nfs_export=on Mounting with nfs_export=on, xfstests overlay/031 triggers a kernel panic since v5.8-rc1 overlayfs updates. overlayfs: orphan index entry (index/00fb1..., ftype=4000, nlink=2) BUG: kernel NULL pointer dereference, address: 0000000000000030 RIP: 0010:ovl_cleanup_and_whiteout+0x28/0x220 [overlay] Bisect point at commit c21c839b8448 ("ovl: whiteout inode sharing") Minimal reproducer: -------------------------------------------------- rm -rf l u w m mkdir -p l u w m mkdir -p l/testdir touch l/testdir/testfile mount -t overlay -o lowerdir=l,upperdir=u,workdir=w,nfs_export=on overlay m echo 1 > m/testdir/testfile umount m rm -rf u/testdir mount -t overlay -o lowerdir=l,upperdir=u,workdir=w,nfs_export=on overlay m umount m -------------------------------------------------- When mount with nfs_export=on, and fail to verify an orphan index, we're cleaning this index from indexdir by calling ovl_cleanup_and_whiteout(). This dereferences ofs->workdir, that was earlier set to NULL. The design was that ovl->workdir will point at ovl->indexdir, but we are assigning ofs->indexdir to ofs->workdir only after ovl_indexdir_cleanup(). There is no reason not to do it sooner, because once we get success from ofs->indexdir = ovl_workdir_create(... there is no turning back. Reported-and-tested-by: Murphy Zhou Fixes: c21c839b8448 ("ovl: whiteout inode sharing") Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/overlayfs/super.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c index 498d49d5dd19..31ef24dfcf88 100644 --- a/fs/overlayfs/super.c +++ b/fs/overlayfs/super.c @@ -1354,6 +1354,12 @@ static int ovl_get_indexdir(struct super_block *sb, struct ovl_fs *ofs, ofs->indexdir = ovl_workdir_create(ofs, OVL_INDEXDIR_NAME, true); if (ofs->indexdir) { + /* index dir will act also as workdir */ + iput(ofs->workdir_trap); + ofs->workdir_trap = NULL; + dput(ofs->workdir); + ofs->workdir = dget(ofs->indexdir); + err = ovl_setup_trap(sb, ofs->indexdir, &ofs->indexdir_trap, "indexdir"); if (err) @@ -1852,20 +1858,12 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent) sb->s_flags |= SB_RDONLY; if (!(ovl_force_readonly(ofs)) && ofs->config.index) { - /* index dir will act also as workdir */ - dput(ofs->workdir); - ofs->workdir = NULL; - iput(ofs->workdir_trap); - ofs->workdir_trap = NULL; - err = ovl_get_indexdir(sb, ofs, oe, &upperpath); if (err) goto out_free_oe; /* Force r/o mount with no index dir */ - if (ofs->indexdir) - ofs->workdir = dget(ofs->indexdir); - else + if (!ofs->indexdir) sb->s_flags |= SB_RDONLY; } -- cgit v1.2.3 From a888db310195400f050b89c47673f0f8babfbb41 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Wed, 8 Jul 2020 16:16:13 +0300 Subject: ovl: fix regression with re-formatted lower squashfs Commit 9df085f3c9a2 ("ovl: relax requirement for non null uuid of lower fs") relaxed the requirement for non null uuid with single lower layer to allow enabling index and nfs_export features with single lower squashfs. Fabian reported a regression in a setup when overlay re-uses an existing upper layer and re-formats the lower squashfs image. Because squashfs has no uuid, the origin xattr in upper layer are decoded from the new lower layer where they may resolve to a wrong origin file and user may get an ESTALE or EIO error on lookup. To avoid the reported regression while still allowing the new features with single lower squashfs, do not allow decoding origin with lower null uuid unless user opted-in to one of the new features that require following the lower inode of non-dir upper (index, xino, metacopy). Reported-by: Fabian Link: https://lore.kernel.org/linux-unionfs/32532923.JtPX5UtSzP@fgdesktop/ Fixes: 9df085f3c9a2 ("ovl: relax requirement for non null uuid of lower fs") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/overlayfs/super.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c index 31ef24dfcf88..94ca095b2a9e 100644 --- a/fs/overlayfs/super.c +++ b/fs/overlayfs/super.c @@ -1402,6 +1402,18 @@ static bool ovl_lower_uuid_ok(struct ovl_fs *ofs, const uuid_t *uuid) if (!ofs->config.nfs_export && !ovl_upper_mnt(ofs)) return true; + /* + * We allow using single lower with null uuid for index and nfs_export + * for example to support those features with single lower squashfs. + * To avoid regressions in setups of overlay with re-formatted lower + * squashfs, do not allow decoding origin with lower null uuid unless + * user opted-in to one of the new features that require following the + * lower inode of non-dir upper. + */ + if (!ofs->config.index && !ofs->config.metacopy && !ofs->config.xino && + uuid_is_null(uuid)) + return false; + for (i = 0; i < ofs->numfs; i++) { /* * We use uuid to associate an overlay lower file handle with a -- cgit v1.2.3 From 470c15636125d1591bc901f6aa2d8e4a60ed2190 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Mon, 13 Jul 2020 17:19:43 +0300 Subject: ovl: force read-only sb on failure to create index dir With index feature enabled, on failure to create index dir, overlay is being mounted read-only. However, we do not forbid user to remount overlay read-write. Fix that by setting ofs->workdir to NULL, which prevents remount read-write. Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/overlayfs/super.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c index 94ca095b2a9e..f41ef1dd384c 100644 --- a/fs/overlayfs/super.c +++ b/fs/overlayfs/super.c @@ -1352,12 +1352,13 @@ static int ovl_get_indexdir(struct super_block *sb, struct ovl_fs *ofs, goto out; } + /* index dir will act also as workdir */ + iput(ofs->workdir_trap); + ofs->workdir_trap = NULL; + dput(ofs->workdir); + ofs->workdir = NULL; ofs->indexdir = ovl_workdir_create(ofs, OVL_INDEXDIR_NAME, true); if (ofs->indexdir) { - /* index dir will act also as workdir */ - iput(ofs->workdir_trap); - ofs->workdir_trap = NULL; - dput(ofs->workdir); ofs->workdir = dget(ofs->indexdir); err = ovl_setup_trap(sb, ofs->indexdir, &ofs->indexdir_trap, @@ -1869,7 +1870,7 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent) if (!ovl_upper_mnt(ofs)) sb->s_flags |= SB_RDONLY; - if (!(ovl_force_readonly(ofs)) && ofs->config.index) { + if (!ovl_force_readonly(ofs) && ofs->config.index) { err = ovl_get_indexdir(sb, ofs, oe, &upperpath); if (err) goto out_free_oe; -- cgit v1.2.3 From f0e1266ed24b8a69655e1ab7fb618dbf6730879b Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Mon, 13 Jul 2020 17:19:44 +0300 Subject: ovl: fix mount option checks for nfs_export with no upperdir Without upperdir mount option, there is no index dir and the dependency checks nfs_export => index for mount options parsing are incorrect. Allow the combination nfs_export=on,index=off with no upperdir and move the check for dependency redirect_dir=nofollow for non-upper mount case to mount options parsing. Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- Documentation/filesystems/overlayfs.rst | 4 ++-- fs/overlayfs/super.c | 31 ++++++++++++++++++------------- 2 files changed, 20 insertions(+), 15 deletions(-) diff --git a/Documentation/filesystems/overlayfs.rst b/Documentation/filesystems/overlayfs.rst index 660dbaf0b9b8..fcda5d6ba9ac 100644 --- a/Documentation/filesystems/overlayfs.rst +++ b/Documentation/filesystems/overlayfs.rst @@ -560,8 +560,8 @@ When the NFS export feature is enabled, all directory index entries are verified on mount time to check that upper file handles are not stale. This verification may cause significant overhead in some cases. -Note: the mount options index=off,nfs_export=on are conflicting and will -result in an error. +Note: the mount options index=off,nfs_export=on are conflicting for a +read-write mount and will result in an error. Testsuite diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c index f41ef1dd384c..4b38141c2985 100644 --- a/fs/overlayfs/super.c +++ b/fs/overlayfs/super.c @@ -580,12 +580,19 @@ static int ovl_parse_opt(char *opt, struct ovl_config *config) } } - /* Workdir is useless in non-upper mount */ - if (!config->upperdir && config->workdir) { - pr_info("option \"workdir=%s\" is useless in a non-upper mount, ignore\n", - config->workdir); - kfree(config->workdir); - config->workdir = NULL; + /* Workdir/index are useless in non-upper mount */ + if (!config->upperdir) { + if (config->workdir) { + pr_info("option \"workdir=%s\" is useless in a non-upper mount, ignore\n", + config->workdir); + kfree(config->workdir); + config->workdir = NULL; + } + if (config->index && index_opt) { + pr_info("option \"index=on\" is useless in a non-upper mount, ignore\n"); + index_opt = false; + } + config->index = false; } err = ovl_parse_redirect_mode(config, config->redirect_mode); @@ -622,11 +629,13 @@ static int ovl_parse_opt(char *opt, struct ovl_config *config) /* Resolve nfs_export -> index dependency */ if (config->nfs_export && !config->index) { - if (nfs_export_opt && index_opt) { + if (!config->upperdir && config->redirect_follow) { + pr_info("NFS export requires \"redirect_dir=nofollow\" on non-upper mount, falling back to nfs_export=off.\n"); + config->nfs_export = false; + } else if (nfs_export_opt && index_opt) { pr_err("conflicting options: nfs_export=on,index=off\n"); return -EINVAL; - } - if (index_opt) { + } else if (index_opt) { /* * There was an explicit index=off that resulted * in this conflict. @@ -1603,10 +1612,6 @@ static struct ovl_entry *ovl_get_lowerstack(struct super_block *sb, if (!ofs->config.upperdir && numlower == 1) { pr_err("at least 2 lowerdir are needed while upperdir nonexistent\n"); return ERR_PTR(-EINVAL); - } else if (!ofs->config.upperdir && ofs->config.nfs_export && - ofs->config.redirect_follow) { - pr_warn("NFS export requires \"redirect_dir=nofollow\" on non-upper mount, falling back to nfs_export=off.\n"); - ofs->config.nfs_export = false; } stack = kcalloc(numlower, sizeof(struct path), GFP_KERNEL); -- cgit v1.2.3 From 811f04bac15181a3351ef1d1aaa377954056e93b Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 8 Jul 2020 09:27:07 +0100 Subject: afs: Fix interruption of operations The afs filesystem driver allows unstarted operations to be cancelled by signal, but most of these can easily be restarted (mkdir for example). The primary culprits for reproducing this are those applications that use SIGALRM to display a progress counter. File lock-extension operation is marked uninterruptible as we have a limited time in which to do it, and the release op is marked uninterruptible also as if we fail to unlock a file, we'll have to wait 20 mins before anyone can lock it again. The store operation logs a warning if it gets interruption, e.g.: kAFS: Unexpected error from FS.StoreData -4 because it's run from the background - but it can also be run from fdatasync()-type things. However, store options aren't marked interruptible at the moment. Fix this in the following ways: (1) Mark store operations as uninterruptible. It might make sense to relax this for certain situations, but I'm not sure how to make sure that background store ops aren't affected by signals to foreground processes that happen to trigger them. (2) In afs_get_io_locks(), where we're getting the serialisation lock for talking to the fileserver, return ERESTARTSYS rather than EINTR because a lot of the operations (e.g. mkdir) are restartable if we haven't yet started sending the op to the server. Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- fs/afs/fs_operation.c | 4 ++-- fs/afs/write.c | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/afs/fs_operation.c b/fs/afs/fs_operation.c index c264839b2fd0..24fd163c6323 100644 --- a/fs/afs/fs_operation.c +++ b/fs/afs/fs_operation.c @@ -71,7 +71,7 @@ static bool afs_get_io_locks(struct afs_operation *op) swap(vnode, vnode2); if (mutex_lock_interruptible(&vnode->io_lock) < 0) { - op->error = -EINTR; + op->error = -ERESTARTSYS; op->flags |= AFS_OPERATION_STOP; _leave(" = f [I 0]"); return false; @@ -80,7 +80,7 @@ static bool afs_get_io_locks(struct afs_operation *op) if (vnode2) { if (mutex_lock_interruptible_nested(&vnode2->io_lock, 1) < 0) { - op->error = -EINTR; + op->error = -ERESTARTSYS; op->flags |= AFS_OPERATION_STOP; mutex_unlock(&vnode->io_lock); op->flags &= ~AFS_OPERATION_LOCK_0; diff --git a/fs/afs/write.c b/fs/afs/write.c index 7437806332d9..a121c247d95a 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -449,6 +449,7 @@ static int afs_store_data(struct address_space *mapping, op->store.first_offset = offset; op->store.last_to = to; op->mtime = vnode->vfs_inode.i_mtime; + op->flags |= AFS_OPERATION_UNINTR; op->ops = &afs_store_data_operation; try_next_key: -- cgit v1.2.3 From 6cbba1f9114a8134cff9138c79add15012fd52b9 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 15 Jul 2020 23:28:38 +0100 Subject: keys: asymmetric: fix error return code in software_key_query() Fix to return negative error code -ENOMEM from kmalloc() error handling case instead of 0, as done elsewhere in this function. Fixes: f1774cb8956a ("X.509: parse public key parameters from x509 for akcipher") Signed-off-by: Wei Yongjun Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- crypto/asymmetric_keys/public_key.c | 1 + 1 file changed, 1 insertion(+) diff --git a/crypto/asymmetric_keys/public_key.c b/crypto/asymmetric_keys/public_key.c index d7f43d4ea925..e5fae4e838c0 100644 --- a/crypto/asymmetric_keys/public_key.c +++ b/crypto/asymmetric_keys/public_key.c @@ -119,6 +119,7 @@ static int software_key_query(const struct kernel_pkey_params *params, if (IS_ERR(tfm)) return PTR_ERR(tfm); + ret = -ENOMEM; key = kmalloc(pkey->keylen + sizeof(u32) * 2 + pkey->paramlen, GFP_KERNEL); if (!key) -- cgit v1.2.3 From 841eb4012cef84820e5906527b31a854f42b0748 Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Tue, 14 Jul 2020 15:08:16 +0300 Subject: dpaa2-eth: check fsl_mc_get_endpoint for IS_ERR_OR_NULL() The fsl_mc_get_endpoint() function can return an error or directly a NULL pointer in case the peer device is not under the root DPRC container. Treat this case also, otherwise it would lead to a NULL pointer when trying to access the peer fsl_mc_device. Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by: Ioana Ciornei Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index f150cd454fa4..0998ceb1a26e 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -3632,7 +3632,7 @@ static int dpaa2_eth_connect_mac(struct dpaa2_eth_priv *priv) dpni_dev = to_fsl_mc_device(priv->net_dev->dev.parent); dpmac_dev = fsl_mc_get_endpoint(dpni_dev); - if (IS_ERR(dpmac_dev) || dpmac_dev->dev.type != &fsl_mc_bus_dpmac_type) + if (IS_ERR_OR_NULL(dpmac_dev) || dpmac_dev->dev.type != &fsl_mc_bus_dpmac_type) return 0; if (dpaa2_mac_is_type_fixed(dpmac_dev, priv->mc_io)) -- cgit v1.2.3 From f961134a612c793d5901a93d85a29337c74af978 Mon Sep 17 00:00:00 2001 From: Stefano Garzarella Date: Fri, 10 Jul 2020 14:12:43 +0200 Subject: vsock/virtio: annotate 'the_virtio_vsock' RCU pointer Commit 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock") starts to use RCU to protect 'the_virtio_vsock' pointer, but we forgot to annotate it. This patch adds the annotation to fix the following sparse errors: net/vmw_vsock/virtio_transport.c:73:17: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:73:17: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:73:17: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:171:17: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:171:17: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:171:17: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:207:17: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:207:17: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:207:17: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:561:13: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:561:13: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:561:13: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:612:9: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:612:9: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:612:9: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:631:9: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:631:9: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:631:9: struct virtio_vsock * Fixes: 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock") Reported-by: Michael S. Tsirkin Signed-off-by: Stefano Garzarella Reviewed-by: Stefan Hajnoczi Acked-by: Michael S. Tsirkin Signed-off-by: Jakub Kicinski --- net/vmw_vsock/virtio_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c index dfbaf6bd8b1c..2700a63ab095 100644 --- a/net/vmw_vsock/virtio_transport.c +++ b/net/vmw_vsock/virtio_transport.c @@ -22,7 +22,7 @@ #include static struct workqueue_struct *virtio_vsock_workqueue; -static struct virtio_vsock *the_virtio_vsock; +static struct virtio_vsock __rcu *the_virtio_vsock; static DEFINE_MUTEX(the_virtio_vsock_mutex); /* protects the_virtio_vsock */ struct virtio_vsock { -- cgit v1.2.3 From c28d9a285668c799eeae2f7f93e929a6028a4d6d Mon Sep 17 00:00:00 2001 From: George Kennedy Date: Wed, 15 Jul 2020 09:59:31 -0400 Subject: ax88172a: fix ax88172a_unbind() failures If ax88172a_unbind() fails, make sure that the return code is less than zero so that cleanup is done properly and avoid UAF. Fixes: a9a51bd727d1 ("ax88172a: fix information leak on short answers") Signed-off-by: George Kennedy Reported-by: syzbot+4cd84f527bf4a10fc9c1@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski --- drivers/net/usb/ax88172a.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c index 4e514f5d7c6c..fd3a04d98dc1 100644 --- a/drivers/net/usb/ax88172a.c +++ b/drivers/net/usb/ax88172a.c @@ -187,6 +187,7 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf) ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0); if (ret < ETH_ALEN) { netdev_err(dev->net, "Failed to read MAC address: %d\n", ret); + ret = -EIO; goto free; } memcpy(dev->net->dev_addr, buf, ETH_ALEN); -- cgit v1.2.3 From 6544abc520f0fff701e9da382110dc29676c683a Mon Sep 17 00:00:00 2001 From: Walter Lozano Date: Wed, 15 Jul 2020 23:54:52 -0300 Subject: opp: Increase parsed_static_opps in _of_add_opp_table_v1() Currently, when using _of_add_opp_table_v2 parsed_static_opps is increased and this value is used in _opp_remove_all_static() to check if there are static opp entries that need to be freed. Unfortunately this does not happen when using _of_add_opp_table_v1(), which leads to warnings. This patch increases parsed_static_opps in _of_add_opp_table_v1() in a similar way as in _of_add_opp_table_v2(). Fixes: 03758d60265c ("opp: Replace list_kref with a local counter") Cc: v5.6+ # v5.6+ Signed-off-by: Walter Lozano [ Viresh: Do the operation with lock held and set the value to 1 instead of incrementing it ] Signed-off-by: Viresh Kumar --- drivers/opp/of.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/opp/of.c b/drivers/opp/of.c index 9a5873591a40..314f306140a1 100644 --- a/drivers/opp/of.c +++ b/drivers/opp/of.c @@ -902,6 +902,10 @@ static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table) return -EINVAL; } + mutex_lock(&opp_table->lock); + opp_table->parsed_static_opps = 1; + mutex_unlock(&opp_table->lock); + val = prop->value; while (nr) { unsigned long freq = be32_to_cpup(val++) * 1000; -- cgit v1.2.3 From 81a33c1ee941c3bb9ffc6bac8f676be13351344e Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Thu, 18 Jun 2020 18:43:53 +0300 Subject: ovl: fix unneeded call to ovl_change_flags() The check if user has changed the overlay file was wrong, causing unneeded call to ovl_change_flags() including taking f_lock on every file access. Fixes: d989903058a8 ("ovl: do not generate duplicate fsnotify events for "fake" path") Cc: # v4.19+ Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/overlayfs/file.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/overlayfs/file.c b/fs/overlayfs/file.c index 01820e654a21..0d940e29d62b 100644 --- a/fs/overlayfs/file.c +++ b/fs/overlayfs/file.c @@ -33,13 +33,16 @@ static char ovl_whatisit(struct inode *inode, struct inode *realinode) return 'm'; } +/* No atime modificaton nor notify on underlying */ +#define OVL_OPEN_FLAGS (O_NOATIME | FMODE_NONOTIFY) + static struct file *ovl_open_realfile(const struct file *file, struct inode *realinode) { struct inode *inode = file_inode(file); struct file *realfile; const struct cred *old_cred; - int flags = file->f_flags | O_NOATIME | FMODE_NONOTIFY; + int flags = file->f_flags | OVL_OPEN_FLAGS; int acc_mode = ACC_MODE(flags); int err; @@ -72,8 +75,7 @@ static int ovl_change_flags(struct file *file, unsigned int flags) struct inode *inode = file_inode(file); int err; - /* No atime modificaton on underlying */ - flags |= O_NOATIME | FMODE_NONOTIFY; + flags |= OVL_OPEN_FLAGS; /* If some flag changed that cannot be changed then something's amiss */ if (WARN_ON((file->f_flags ^ flags) & ~OVL_SETFL_MASK)) @@ -126,7 +128,7 @@ static int ovl_real_fdget_meta(const struct file *file, struct fd *real, } /* Did the flags change since open? */ - if (unlikely((file->f_flags ^ real->file->f_flags) & ~O_NOATIME)) + if (unlikely((file->f_flags ^ real->file->f_flags) & ~OVL_OPEN_FLAGS)) return ovl_change_flags(real->file, file->f_flags); return 0; -- cgit v1.2.3 From 4518dfcf761e3c44632855abcf433236cf7ab6c6 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Wed, 15 Jul 2020 16:38:08 +0300 Subject: ovl: fix lookup of indexed hardlinks with metacopy We recently moved setting inode flag OVL_UPPERDATA to ovl_lookup(). When looking up an overlay dentry, upperdentry may be found by index and not by name. In that case, we fail to read the metacopy xattr and falsly set the OVL_UPPERDATA on the overlay inode. This caused a regression in xfstest overlay/033 when run with OVERLAY_MOUNT_OPTIONS="-o metacopy=on". Fixes: 28166ab3c875 ("ovl: initialize OVL_UPPERDATA in ovl_lookup()") Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/overlayfs/namei.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/overlayfs/namei.c b/fs/overlayfs/namei.c index 3cad68c3efb2..f7d4358db637 100644 --- a/fs/overlayfs/namei.c +++ b/fs/overlayfs/namei.c @@ -1066,6 +1066,10 @@ struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry, upperredirect = NULL; goto out_free_oe; } + err = ovl_check_metacopy_xattr(upperdentry); + if (err < 0) + goto out_free_oe; + uppermetacopy = err; } if (upperdentry || ctr) { -- cgit v1.2.3 From 473fbe13fd6f9082e413aea37e624ecbce5463cc Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Thu, 16 Jul 2020 14:42:33 +0800 Subject: ALSA: hda/realtek - Enable Speaker for ASUS UX533 and UX534 ASUS UX533 and UX534 speaker still can't output. End User feedback speaker didn't have output. Add this COEF value will enable it. Fixes: 4e051106730d ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294") Cc: Signed-off-by: Kailang Yang Link: https://lore.kernel.org/r/80334402a93b48e385f8f4841b59ae09@realtek.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 66e98a5cfea2..fff56fe8caf1 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7136,6 +7136,8 @@ static const struct hda_fixup alc269_fixups[] = { /* Set EAPD high */ { 0x20, AC_VERB_SET_COEF_INDEX, 0x40 }, { 0x20, AC_VERB_SET_PROC_COEF, 0x8800 }, + { 0x20, AC_VERB_SET_COEF_INDEX, 0x0f }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x7774 }, { } }, .chained = true, -- cgit v1.2.3 From 158ae2f5e6fead30be1f0c203037f5556871513b Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Thu, 16 Jul 2020 15:21:59 +0800 Subject: ALSA: hda/realtek - Enable Speaker for ASUS UX563 ASUS UX563 speaker can't output. Add quirk to link suitable model will enable it. This model also could enable headset Mic. Signed-off-by: Kailang Yang Cc: Link: https://lore.kernel.org/r/96dee3ab01a04c28a7b44061e88009dd@realtek.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index fff56fe8caf1..45df33d1bd1a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7551,6 +7551,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_DUAL_SPK), SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x1043, 0x18f1, "Asus FX505DT", ALC256_FIXUP_ASUS_HEADSET_MIC), + SND_PCI_QUIRK(0x1043, 0x194e, "ASUS UX563FD", ALC294_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x19ce, "ASUS B9450FA", ALC294_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x19e1, "ASUS UX581LV", ALC295_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), -- cgit v1.2.3 From e7b931bee739e8a77ae216e613d3b99342b6dec0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 15 Jul 2020 11:02:45 +0200 Subject: USB: serial: iuu_phoenix: fix memory corruption The driver would happily overwrite its write buffer with user data in 256 byte increments due to a removed buffer-space sanity check. Fixes: 5fcf62b0f1f2 ("tty: iuu_phoenix: fix locking.") Cc: stable # 2.6.31 Signed-off-by: Johan Hovold --- drivers/usb/serial/iuu_phoenix.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index d5bff69b1769..b8dfeb4fb2ed 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -697,14 +697,16 @@ static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port, struct iuu_private *priv = usb_get_serial_port_data(port); unsigned long flags; - if (count > 256) - return -ENOMEM; - spin_lock_irqsave(&priv->lock, flags); + count = min(count, 256 - priv->writelen); + if (count == 0) + goto out; + /* fill the buffer */ memcpy(priv->writebuf + priv->writelen, buf, count); priv->writelen += count; +out: spin_unlock_irqrestore(&priv->lock, flags); return count; -- cgit v1.2.3 From 5734e509d5d515c187f642937ef2de1e58d7715d Mon Sep 17 00:00:00 2001 From: PeiSen Hou Date: Thu, 16 Jul 2020 11:01:34 +0200 Subject: ALSA: hda/realtek - fixup for yet another Intel reference board Add headset_jack for the intel reference board support with 10ec:1230. Signed-off-by: PeiSen Hou Link: https://lore.kernel.org/r/20200716090134.9811-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 45df33d1bd1a..1b06c4261248 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7581,6 +7581,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x10cf, 0x1629, "Lifebook U7x7", ALC255_FIXUP_LIFEBOOK_U7x7_HEADSET_MIC), SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", ALC269_FIXUP_LIFEBOOK_EXTMIC), SND_PCI_QUIRK(0x10ec, 0x10f2, "Intel Reference board", ALC700_FIXUP_INTEL_REFERENCE), + SND_PCI_QUIRK(0x10ec, 0x1230, "Intel Reference board", ALC225_FIXUP_HEADSET_JACK), SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-SZ6", ALC269_FIXUP_HEADSET_MODE), SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x144d, 0xc169, "Samsung Notebook 9 Pen (NP930SBE-K01US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), -- cgit v1.2.3 From bdc5c744c7b6457d18a95c26769dad0e7f480a08 Mon Sep 17 00:00:00 2001 From: Qi Liu Date: Thu, 16 Jul 2020 17:19:25 +0800 Subject: drivers/perf: Fix kernel panic when rmmod PMU modules during perf sampling When users try to remove PMU modules during perf sampling, kernel panic will happen because the pmu->read() is a NULL pointer here. INFO on HiSilicon hip08 platform as follow: pc : hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] lr : hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] sp : ffff800010103e90 x29: ffff800010103e90 x28: ffff0027db0c0e40 x27: ffffa29a76f129d8 x26: ffffa29a77ceb000 x25: ffffa29a773a5000 x24: ffffa29a77392000 x23: ffffddffe5943f08 x22: ffff002784285960 x21: ffff002784285800 x20: ffff0027d2e76c80 x19: ffff0027842859e0 x18: ffff80003498bcc8 x17: ffffa29a76afe910 x16: ffffa29a7583f530 x15: 16151a1512061a1e x14: 0000000000000000 x13: ffffa29a76f1e238 x12: 0000000000000001 x11: 0000000000000400 x10: 00000000000009f0 x9 : ffff8000107b3e70 x8 : ffff0027db0c1890 x7 : ffffa29a773a7000 x6 : 00000007f5131013 x5 : 00000007f5131013 x4 : 09f257d417c00000 x3 : 00000002187bd7ce x2 : ffffa29a38f0f0d8 x1 : ffffa29a38eae268 x0 : ffff0027d2e76c80 Call trace: hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] __perf_event_read+0x1a0/0x1f8 flush_smp_call_function_queue+0xa0/0x160 generic_smp_call_function_single_interrupt+0x18/0x20 handle_IPI+0x31c/0x4dc gic_handle_irq+0x2c8/0x310 el1_irq+0xcc/0x180 arch_cpu_idle+0x4c/0x20c default_idle_call+0x20/0x30 do_idle+0x1b4/0x270 cpu_startup_entry+0x28/0x30 secondary_start_kernel+0x1a4/0x1fc To solve the above issue, current module should be registered to kernel, so that try_module_get() can be invoked when perf sampling starts. This adds the reference counting of module and could prevent users from removing modules during sampling. Reported-by: Haifeng Wang Signed-off-by: Qi Liu Reviewed-by: John Garry Link: https://lore.kernel.org/r/1594891165-8228-1-git-send-email-liuqi115@huawei.com Signed-off-by: Will Deacon --- drivers/perf/arm_smmuv3_pmu.c | 1 + drivers/perf/fsl_imx8_ddr_perf.c | 1 + drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 1 + 5 files changed, 5 insertions(+) diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c index 48e28ef93a70..90caba56dfbc 100644 --- a/drivers/perf/arm_smmuv3_pmu.c +++ b/drivers/perf/arm_smmuv3_pmu.c @@ -742,6 +742,7 @@ static int smmu_pmu_probe(struct platform_device *pdev) platform_set_drvdata(pdev, smmu_pmu); smmu_pmu->pmu = (struct pmu) { + .module = THIS_MODULE, .task_ctx_nr = perf_invalid_context, .pmu_enable = smmu_pmu_enable, .pmu_disable = smmu_pmu_disable, diff --git a/drivers/perf/fsl_imx8_ddr_perf.c b/drivers/perf/fsl_imx8_ddr_perf.c index 90884d14f95f..2aed2d96f8ae 100644 --- a/drivers/perf/fsl_imx8_ddr_perf.c +++ b/drivers/perf/fsl_imx8_ddr_perf.c @@ -512,6 +512,7 @@ static int ddr_perf_init(struct ddr_pmu *pmu, void __iomem *base, { *pmu = (struct ddr_pmu) { .pmu = (struct pmu) { + .module = THIS_MODULE, .capabilities = PERF_PMU_CAP_NO_EXCLUDE, .task_ctx_nr = perf_invalid_context, .attr_groups = attr_groups, diff --git a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c index 15713faaa07e..71587f19fcd5 100644 --- a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c @@ -378,6 +378,7 @@ static int hisi_ddrc_pmu_probe(struct platform_device *pdev) ddrc_pmu->sccl_id, ddrc_pmu->index_id); ddrc_pmu->pmu = (struct pmu) { .name = name, + .module = THIS_MODULE, .task_ctx_nr = perf_invalid_context, .event_init = hisi_uncore_pmu_event_init, .pmu_enable = hisi_uncore_pmu_enable, diff --git a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c index dcc5600788a9..c199de7b219d 100644 --- a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c @@ -390,6 +390,7 @@ static int hisi_hha_pmu_probe(struct platform_device *pdev) hha_pmu->sccl_id, hha_pmu->index_id); hha_pmu->pmu = (struct pmu) { .name = name, + .module = THIS_MODULE, .task_ctx_nr = perf_invalid_context, .event_init = hisi_uncore_pmu_event_init, .pmu_enable = hisi_uncore_pmu_enable, diff --git a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c index 7719ae4e2c56..567d7e6f69d8 100644 --- a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c @@ -380,6 +380,7 @@ static int hisi_l3c_pmu_probe(struct platform_device *pdev) l3c_pmu->sccl_id, l3c_pmu->index_id); l3c_pmu->pmu = (struct pmu) { .name = name, + .module = THIS_MODULE, .task_ctx_nr = perf_invalid_context, .event_init = hisi_uncore_pmu_event_init, .pmu_enable = hisi_uncore_pmu_enable, -- cgit v1.2.3 From ac2081cdc4d99c57f219c1a6171526e0fa0a6fff Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 2 Jul 2020 21:16:20 +0100 Subject: arm64: ptrace: Consistently use pseudo-singlestep exceptions Although the arm64 single-step state machine can be fast-forwarded in cases where we wish to generate a SIGTRAP without actually executing an instruction, this has two major limitations outside of simply skipping an instruction due to emulation. 1. Stepping out of a ptrace signal stop into a signal handler where SIGTRAP is blocked. Fast-forwarding the stepping state machine in this case will result in a forced SIGTRAP, with the handler reset to SIG_DFL. 2. The hardware implicitly fast-forwards the state machine when executing an SVC instruction for issuing a system call. This can interact badly with subsequent ptrace stops signalled during the execution of the system call (e.g. SYSCALL_EXIT or seccomp traps), as they may corrupt the stepping state by updating the PSTATE for the tracee. Resolve both of these issues by injecting a pseudo-singlestep exception on entry to a signal handler and also on return to userspace following a system call. Cc: Cc: Mark Rutland Tested-by: Luis Machado Reported-by: Keno Fischer Signed-off-by: Will Deacon --- arch/arm64/include/asm/thread_info.h | 1 + arch/arm64/kernel/ptrace.c | 25 +++++++++++++++++++------ arch/arm64/kernel/signal.c | 11 ++--------- arch/arm64/kernel/syscall.c | 2 +- 4 files changed, 23 insertions(+), 16 deletions(-) diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h index 6ea8b6a26ae9..5e784e16ee89 100644 --- a/arch/arm64/include/asm/thread_info.h +++ b/arch/arm64/include/asm/thread_info.h @@ -93,6 +93,7 @@ void arch_release_task_struct(struct task_struct *tsk); #define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) #define _TIF_UPROBE (1 << TIF_UPROBE) #define _TIF_FSCHECK (1 << TIF_FSCHECK) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) #define _TIF_32BIT (1 << TIF_32BIT) #define _TIF_SVE (1 << TIF_SVE) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 68b7f34a08f5..057d4aa1af4d 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -1818,12 +1818,23 @@ static void tracehook_report_syscall(struct pt_regs *regs, saved_reg = regs->regs[regno]; regs->regs[regno] = dir; - if (dir == PTRACE_SYSCALL_EXIT) + if (dir == PTRACE_SYSCALL_ENTER) { + if (tracehook_report_syscall_entry(regs)) + forget_syscall(regs); + regs->regs[regno] = saved_reg; + } else if (!test_thread_flag(TIF_SINGLESTEP)) { tracehook_report_syscall_exit(regs, 0); - else if (tracehook_report_syscall_entry(regs)) - forget_syscall(regs); + regs->regs[regno] = saved_reg; + } else { + regs->regs[regno] = saved_reg; - regs->regs[regno] = saved_reg; + /* + * Signal a pseudo-step exception since we are stepping but + * tracer modifications to the registers may have rewound the + * state machine. + */ + tracehook_report_syscall_exit(regs, 1); + } } int syscall_trace_enter(struct pt_regs *regs) @@ -1851,12 +1862,14 @@ int syscall_trace_enter(struct pt_regs *regs) void syscall_trace_exit(struct pt_regs *regs) { + unsigned long flags = READ_ONCE(current_thread_info()->flags); + audit_syscall_exit(regs); - if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + if (flags & _TIF_SYSCALL_TRACEPOINT) trace_sys_exit(regs, regs_return_value(regs)); - if (test_thread_flag(TIF_SYSCALL_TRACE)) + if (flags & (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP)) tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT); rseq_syscall(regs); diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index 801d56cdf701..3b4f31f35e45 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -800,7 +800,6 @@ static void setup_restart_syscall(struct pt_regs *regs) */ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) { - struct task_struct *tsk = current; sigset_t *oldset = sigmask_to_save(); int usig = ksig->sig; int ret; @@ -824,14 +823,8 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) */ ret |= !valid_user_regs(®s->user_regs, current); - /* - * Fast forward the stepping logic so we step into the signal - * handler. - */ - if (!ret) - user_fastforward_single_step(tsk); - - signal_setup_done(ret, ksig, 0); + /* Step into the signal handler if we are stepping */ + signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP)); } /* diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index 5f5b868292f5..7c14466a12af 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -139,7 +139,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, if (!has_syscall_work(flags) && !IS_ENABLED(CONFIG_DEBUG_RSEQ)) { local_daif_mask(); flags = current_thread_info()->flags; - if (!has_syscall_work(flags)) { + if (!has_syscall_work(flags) && !(flags & _TIF_SINGLESTEP)) { /* * We're off to userspace, where interrupts are * always enabled after we restore the flags from -- cgit v1.2.3 From 3a5a4366cecc25daa300b9a9174f7fdd352b9068 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 13 Feb 2020 12:06:26 +0000 Subject: arm64: ptrace: Override SPSR.SS when single-stepping is enabled Luis reports that, when reverse debugging with GDB, single-step does not function as expected on arm64: | I've noticed, under very specific conditions, that a PTRACE_SINGLESTEP | request by GDB won't execute the underlying instruction. As a consequence, | the PC doesn't move, but we return a SIGTRAP just like we would for a | regular successful PTRACE_SINGLESTEP request. The underlying problem is that when the CPU register state is restored as part of a reverse step, the SPSR.SS bit is cleared and so the hardware single-step state can transition to the "active-pending" state, causing an unexpected step exception to be taken immediately if a step operation is attempted. In hindsight, we probably shouldn't have exposed SPSR.SS in the pstate accessible by the GPR regset, but it's a bit late for that now. Instead, simply prevent userspace from configuring the bit to a value which is inconsistent with the TIF_SINGLESTEP state for the task being traced. Cc: Cc: Mark Rutland Cc: Keno Fischer Link: https://lore.kernel.org/r/1eed6d69-d53d-9657-1fc9-c089be07f98c@linaro.org Reported-by: Luis Machado Tested-by: Luis Machado Signed-off-by: Will Deacon --- arch/arm64/include/asm/debug-monitors.h | 2 ++ arch/arm64/kernel/debug-monitors.c | 20 ++++++++++++++++---- arch/arm64/kernel/ptrace.c | 4 ++-- 3 files changed, 20 insertions(+), 6 deletions(-) diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h index e5ceea213e39..0b298f48f5bf 100644 --- a/arch/arm64/include/asm/debug-monitors.h +++ b/arch/arm64/include/asm/debug-monitors.h @@ -109,6 +109,8 @@ void disable_debug_monitors(enum dbg_active_el el); void user_rewind_single_step(struct task_struct *task); void user_fastforward_single_step(struct task_struct *task); +void user_regs_reset_single_step(struct user_pt_regs *regs, + struct task_struct *task); void kernel_enable_single_step(struct pt_regs *regs); void kernel_disable_single_step(void); diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index 5df49366e9ab..91146c0a3691 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -141,17 +141,20 @@ postcore_initcall(debug_monitors_init); /* * Single step API and exception handling. */ -static void set_regs_spsr_ss(struct pt_regs *regs) +static void set_user_regs_spsr_ss(struct user_pt_regs *regs) { regs->pstate |= DBG_SPSR_SS; } -NOKPROBE_SYMBOL(set_regs_spsr_ss); +NOKPROBE_SYMBOL(set_user_regs_spsr_ss); -static void clear_regs_spsr_ss(struct pt_regs *regs) +static void clear_user_regs_spsr_ss(struct user_pt_regs *regs) { regs->pstate &= ~DBG_SPSR_SS; } -NOKPROBE_SYMBOL(clear_regs_spsr_ss); +NOKPROBE_SYMBOL(clear_user_regs_spsr_ss); + +#define set_regs_spsr_ss(r) set_user_regs_spsr_ss(&(r)->user_regs) +#define clear_regs_spsr_ss(r) clear_user_regs_spsr_ss(&(r)->user_regs) static DEFINE_SPINLOCK(debug_hook_lock); static LIST_HEAD(user_step_hook); @@ -402,6 +405,15 @@ void user_fastforward_single_step(struct task_struct *task) clear_regs_spsr_ss(task_pt_regs(task)); } +void user_regs_reset_single_step(struct user_pt_regs *regs, + struct task_struct *task) +{ + if (test_tsk_thread_flag(task, TIF_SINGLESTEP)) + set_user_regs_spsr_ss(regs); + else + clear_user_regs_spsr_ss(regs); +} + /* Kernel API */ void kernel_enable_single_step(struct pt_regs *regs) { diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 057d4aa1af4d..22f9053b55b6 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -1947,8 +1947,8 @@ static int valid_native_regs(struct user_pt_regs *regs) */ int valid_user_regs(struct user_pt_regs *regs, struct task_struct *task) { - if (!test_tsk_thread_flag(task, TIF_SINGLESTEP)) - regs->pstate &= ~DBG_SPSR_SS; + /* https://lore.kernel.org/lkml/20191118131525.GA4180@willie-the-truck */ + user_regs_reset_single_step(regs, task); if (is_compat_thread(task_thread_info(task))) return valid_compat_regs(regs); -- cgit v1.2.3 From 15956689a0e60aa0c795174f3c310b60d8794235 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 3 Jul 2020 12:08:42 +0100 Subject: arm64: compat: Ensure upper 32 bits of x0 are zero on syscall return Although we zero the upper bits of x0 on entry to the kernel from an AArch32 task, we do not clear them on the exception return path and can therefore expose 64-bit sign extended syscall return values to userspace via interfaces such as the 'perf_regs' ABI, which deal exclusively with 64-bit registers. Explicitly clear the upper 32 bits of x0 on return from a compat system call. Cc: Cc: Mark Rutland Cc: Keno Fischer Cc: Luis Machado Signed-off-by: Will Deacon --- arch/arm64/include/asm/syscall.h | 12 +++++++++++- arch/arm64/kernel/syscall.c | 3 +++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h index 65299a2dcf9c..cfc0672013f6 100644 --- a/arch/arm64/include/asm/syscall.h +++ b/arch/arm64/include/asm/syscall.h @@ -34,6 +34,10 @@ static inline long syscall_get_error(struct task_struct *task, struct pt_regs *regs) { unsigned long error = regs->regs[0]; + + if (is_compat_thread(task_thread_info(task))) + error = sign_extend64(error, 31); + return IS_ERR_VALUE(error) ? error : 0; } @@ -47,7 +51,13 @@ static inline void syscall_set_return_value(struct task_struct *task, struct pt_regs *regs, int error, long val) { - regs->regs[0] = (long) error ? error : val; + if (error) + val = error; + + if (is_compat_thread(task_thread_info(task))) + val = lower_32_bits(val); + + regs->regs[0] = val; } #define SYSCALL_MAX_ARGS 6 diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index 7c14466a12af..98a26d4e7b0c 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -50,6 +50,9 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno, ret = do_ni_syscall(regs, scno); } + if (is_compat_task()) + ret = lower_32_bits(ret); + regs->regs[0] = ret; } -- cgit v1.2.3 From 59ee987ea47caff8c1e7ba4b89932c6900a35d0c Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 2 Jul 2020 21:14:20 +0100 Subject: arm64: ptrace: Add a comment describing our syscall entry/exit trap ABI Our tracehook logic for syscall entry/exit raises a SIGTRAP back to the tracer following a ptrace request such as PTRACE_SYSCALL. As part of this procedure, we clobber the reported value of one of the tracee's general purpose registers (x7 for native tasks, r12 for compat) to indicate whether the stop occurred on syscall entry or exit. This is a slightly unfortunate ABI, as it prevents the tracer from accessing the real register value and is at odds with other similar stops such as seccomp traps. Since we're stuck with this ABI, expand the comment in our tracehook logic to acknowledge the issue and describe the behaviour in more detail. Cc: Mark Rutland Cc: Luis Machado Reported-by: Keno Fischer Signed-off-by: Will Deacon --- arch/arm64/kernel/ptrace.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 22f9053b55b6..89fbee3991a2 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -1811,8 +1811,20 @@ static void tracehook_report_syscall(struct pt_regs *regs, unsigned long saved_reg; /* - * A scratch register (ip(r12) on AArch32, x7 on AArch64) is - * used to denote syscall entry/exit: + * We have some ABI weirdness here in the way that we handle syscall + * exit stops because we indicate whether or not the stop has been + * signalled from syscall entry or syscall exit by clobbering a general + * purpose register (ip/r12 for AArch32, x7 for AArch64) in the tracee + * and restoring its old value after the stop. This means that: + * + * - Any writes by the tracer to this register during the stop are + * ignored/discarded. + * + * - The actual value of the register is not available during the stop, + * so the tracer cannot save it and restore it later. + * + * - Syscall stops behave differently to seccomp and pseudo-step traps + * (the latter do not nobble any registers). */ regno = (is_compat_task() ? 12 : 7); saved_reg = regs->regs[regno]; -- cgit v1.2.3 From 139dbe5d8ed383cbd1ada56c78dbbbd35bf6a9d3 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 3 Jul 2020 09:41:24 +0100 Subject: arm64: syscall: Expand the comment about ptrace and syscall(-1) If a task executes syscall(-1), we intercept this early and force x0 to be -ENOSYS so that we don't need to distinguish this scenario from one where the scno is -1 because a tracer wants to skip the system call using ptrace. With the return value set, the return path is the same as the skip case. Although there is a one-line comment noting this in el0_svc_common(), it misses out most of the detail. Expand the comment to describe a bit more about what is going on. Cc: Mark Rutland Cc: Keno Fischer Cc: Luis Machado Signed-off-by: Will Deacon --- arch/arm64/kernel/syscall.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index 98a26d4e7b0c..5f0c04863d2c 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -124,7 +124,21 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, user_exit(); if (has_syscall_work(flags)) { - /* set default errno for user-issued syscall(-1) */ + /* + * The de-facto standard way to skip a system call using ptrace + * is to set the system call to -1 (NO_SYSCALL) and set x0 to a + * suitable error code for consumption by userspace. However, + * this cannot be distinguished from a user-issued syscall(-1) + * and so we must set x0 to -ENOSYS here in case the tracer doesn't + * issue the skip and we fall into trace_exit with x0 preserved. + * + * This is slightly odd because it also means that if a tracer + * sets the system call number to -1 but does not initialise x0, + * then x0 will be preserved for all system calls apart from a + * user-issued syscall(-1). However, requesting a skip and not + * setting the return value is unlikely to do anything sensible + * anyway. + */ if (scno == NO_SYSCALL) regs->regs[0] = -ENOSYS; scno = syscall_trace_enter(regs); -- cgit v1.2.3 From d83ee6e3e75db6f518ef2b0858f163849f2ddeb7 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 10 Jul 2020 13:20:57 +0100 Subject: arm64: ptrace: Use NO_SYSCALL instead of -1 in syscall_trace_enter() Setting a system call number of -1 is special, as it indicates that the current system call should be skipped. Use NO_SYSCALL instead of -1 when checking for this scenario, which is different from the -1 returned due to a seccomp failure. Cc: Mark Rutland Cc: Keno Fischer Cc: Luis Machado Signed-off-by: Will Deacon --- arch/arm64/kernel/ptrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 89fbee3991a2..1e02e98e68dd 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -1856,12 +1856,12 @@ int syscall_trace_enter(struct pt_regs *regs) if (flags & (_TIF_SYSCALL_EMU | _TIF_SYSCALL_TRACE)) { tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); if (!in_syscall(regs) || (flags & _TIF_SYSCALL_EMU)) - return -1; + return NO_SYSCALL; } /* Do the secure computing after ptrace; failures should be fast. */ if (secure_computing() == -1) - return -1; + return NO_SYSCALL; if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_enter(regs, regs->syscallno); -- cgit v1.2.3 From 5afc78551bf5d53279036e0bf63314e35631d79f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 13 Feb 2020 12:12:26 +0000 Subject: arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP Rather than open-code test_tsk_thread_flag() at each callsite, simply replace the couple of offenders with calls to test_tsk_thread_flag() directly. Signed-off-by: Will Deacon --- arch/arm64/kernel/debug-monitors.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index 91146c0a3691..7310a4f7f993 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -394,14 +394,14 @@ void user_rewind_single_step(struct task_struct *task) * If single step is active for this thread, then set SPSR.SS * to 1 to avoid returning to the active-pending state. */ - if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP)) + if (test_tsk_thread_flag(task, TIF_SINGLESTEP)) set_regs_spsr_ss(task_pt_regs(task)); } NOKPROBE_SYMBOL(user_rewind_single_step); void user_fastforward_single_step(struct task_struct *task) { - if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP)) + if (test_tsk_thread_flag(task, TIF_SINGLESTEP)) clear_regs_spsr_ss(task_pt_regs(task)); } -- cgit v1.2.3 From c3d6057e07a5d15be7c69ea545b3f91877808c96 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Sun, 12 Jul 2020 13:26:41 +0300 Subject: RDMA/mlx5: Use xa_lock_irq when access to SRQ table SRQ table is accessed both from interrupt and process context, therefore we must use xa_lock_irq. inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. kworker/u17:9/8573 takes: ffff8883e3503d30 (&xa->xa_lock#13){?...}-{2:2}, at: mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib] {IN-HARDIRQ-W} state was registered at: lock_acquire+0xb9/0x3a0 _raw_spin_lock+0x25/0x30 srq_event_notifier+0x2b/0xc0 [mlx5_ib] notifier_call_chain+0x45/0x70 __atomic_notifier_call_chain+0x69/0x100 forward_event+0x36/0xc0 [mlx5_core] notifier_call_chain+0x45/0x70 __atomic_notifier_call_chain+0x69/0x100 mlx5_eq_async_int+0xc5/0x160 [mlx5_core] notifier_call_chain+0x45/0x70 __atomic_notifier_call_chain+0x69/0x100 mlx5_irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x43/0x2a0 handle_irq_event_percpu+0x30/0x70 handle_irq_event+0x34/0x60 handle_edge_irq+0x7c/0x1b0 do_IRQ+0x60/0x110 ret_from_intr+0x0/0x2a default_idle+0x34/0x160 do_idle+0x1ec/0x220 cpu_startup_entry+0x19/0x20 start_secondary+0x153/0x1a0 secondary_startup_64+0xa4/0xb0 irq event stamp: 20907 hardirqs last enabled at (20907): _raw_spin_unlock_irq+0x24/0x30 hardirqs last disabled at (20906): _raw_spin_lock_irq+0xf/0x40 softirqs last enabled at (20746): __do_softirq+0x2c9/0x436 softirqs last disabled at (20681): irq_exit+0xb3/0xc0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xa->xa_lock#13); lock(&xa->xa_lock#13); *** DEADLOCK *** 2 locks held by kworker/u17:9/8573: #0: ffff888295218d38 ((wq_completion)mlx5_ib_page_fault){+.+.}-{0:0}, at: process_one_work+0x1f1/0x5f0 #1: ffff888401647e78 ((work_completion)(&pfault->work)){+.+.}-{0:0}, at: process_one_work+0x1f1/0x5f0 stack backtrace: CPU: 0 PID: 8573 Comm: kworker/u17:9 Tainted: GO 5.7.0_for_upstream_min_debug_2020_06_14_11_31_46_41 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib] Call Trace: dump_stack+0x71/0x9b mark_lock+0x4f2/0x590 ? print_shortest_lock_dependencies+0x200/0x200 __lock_acquire+0xa00/0x1eb0 lock_acquire+0xb9/0x3a0 ? mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib] _raw_spin_lock+0x25/0x30 ? mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib] mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib] mlx5_ib_eqe_pf_action+0x257/0xa30 [mlx5_ib] ? process_one_work+0x209/0x5f0 process_one_work+0x27b/0x5f0 ? __schedule+0x280/0x7e0 worker_thread+0x2d/0x3c0 ? process_one_work+0x5f0/0x5f0 kthread+0x111/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x24/0x30 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Link: https://lore.kernel.org/r/20200712102641.15210-1-leon@kernel.org Signed-off-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/srq_cmd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/srq_cmd.c b/drivers/infiniband/hw/mlx5/srq_cmd.c index 6f5eadc4d183..37aaacebd3f2 100644 --- a/drivers/infiniband/hw/mlx5/srq_cmd.c +++ b/drivers/infiniband/hw/mlx5/srq_cmd.c @@ -83,11 +83,11 @@ struct mlx5_core_srq *mlx5_cmd_get_srq(struct mlx5_ib_dev *dev, u32 srqn) struct mlx5_srq_table *table = &dev->srq_table; struct mlx5_core_srq *srq; - xa_lock(&table->array); + xa_lock_irq(&table->array); srq = xa_load(&table->array, srqn); if (srq) refcount_inc(&srq->common.refcount); - xa_unlock(&table->array); + xa_unlock_irq(&table->array); return srq; } -- cgit v1.2.3 From 7b9bd73ed13d3c399f76bb7578cbe1b9e5a8e8b0 Mon Sep 17 00:00:00 2001 From: Weihang Li Date: Tue, 14 Jul 2020 19:28:58 +0800 Subject: RDMA/hns: Fix wrong assignment of lp_pktn_ini in QPC The RoCE Engine will schedule to another QP after one has sent (2 ^ lp_pktn_ini) packets. lp_pktn_ini is set in QPC and should be calculated from 2 factors: 1. current MTU as a integer 2. the RoCE Engine's maximum slice length 64KB But the driver use MTU as a enum ib_mtu and the max inline capability, the lp_pktn_ini will be much bigger than expected which may cause traffic of some QPs to never get scheduled. Fixes: b713128de7a1 ("RDMA/hns: Adjust lp_pktn_ini dynamically") Link: https://lore.kernel.org/r/1594726138-49294-1-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 34 +++++++++++++++++++----------- 1 file changed, 22 insertions(+), 12 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index dd01a51816cc..0618ced45bf8 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -3954,6 +3954,15 @@ static int config_qp_sq_buf(struct hns_roce_dev *hr_dev, return 0; } +static inline enum ib_mtu get_mtu(struct ib_qp *ibqp, + const struct ib_qp_attr *attr) +{ + if (ibqp->qp_type == IB_QPT_GSI || ibqp->qp_type == IB_QPT_UD) + return IB_MTU_4096; + + return attr->path_mtu; +} + static int modify_qp_init_to_rtr(struct ib_qp *ibqp, const struct ib_qp_attr *attr, int attr_mask, struct hns_roce_v2_qp_context *context, @@ -3965,6 +3974,7 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp, struct ib_device *ibdev = &hr_dev->ib_dev; dma_addr_t trrl_ba; dma_addr_t irrl_ba; + enum ib_mtu mtu; u8 port_num; u64 *mtts; u8 *dmac; @@ -4062,23 +4072,23 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp, roce_set_field(qpc_mask->byte_52_udpspn_dmac, V2_QPC_BYTE_52_DMAC_M, V2_QPC_BYTE_52_DMAC_S, 0); - /* mtu*(2^LP_PKTN_INI) should not bigger than 1 message length 64kb */ + mtu = get_mtu(ibqp, attr); + + if (attr_mask & IB_QP_PATH_MTU) { + roce_set_field(context->byte_24_mtu_tc, V2_QPC_BYTE_24_MTU_M, + V2_QPC_BYTE_24_MTU_S, mtu); + roce_set_field(qpc_mask->byte_24_mtu_tc, V2_QPC_BYTE_24_MTU_M, + V2_QPC_BYTE_24_MTU_S, 0); + } + +#define MAX_LP_MSG_LEN 65536 + /* MTU*(2^LP_PKTN_INI) shouldn't be bigger than 64kb */ roce_set_field(context->byte_56_dqpn_err, V2_QPC_BYTE_56_LP_PKTN_INI_M, V2_QPC_BYTE_56_LP_PKTN_INI_S, - ilog2(hr_dev->caps.max_sq_inline / IB_MTU_4096)); + ilog2(MAX_LP_MSG_LEN / ib_mtu_enum_to_int(mtu))); roce_set_field(qpc_mask->byte_56_dqpn_err, V2_QPC_BYTE_56_LP_PKTN_INI_M, V2_QPC_BYTE_56_LP_PKTN_INI_S, 0); - if (ibqp->qp_type == IB_QPT_GSI || ibqp->qp_type == IB_QPT_UD) - roce_set_field(context->byte_24_mtu_tc, V2_QPC_BYTE_24_MTU_M, - V2_QPC_BYTE_24_MTU_S, IB_MTU_4096); - else if (attr_mask & IB_QP_PATH_MTU) - roce_set_field(context->byte_24_mtu_tc, V2_QPC_BYTE_24_MTU_M, - V2_QPC_BYTE_24_MTU_S, attr->path_mtu); - - roce_set_field(qpc_mask->byte_24_mtu_tc, V2_QPC_BYTE_24_MTU_M, - V2_QPC_BYTE_24_MTU_S, 0); - roce_set_bit(qpc_mask->byte_108_rx_reqepsn, V2_QPC_BYTE_108_RX_REQ_PSN_ERR_S, 0); roce_set_field(qpc_mask->byte_96_rx_reqmsn, V2_QPC_BYTE_96_RX_REQ_MSN_M, -- cgit v1.2.3 From 79d5208386523183ae5cd359a9d1c024f46b1202 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Tue, 14 Jul 2020 19:42:15 +0800 Subject: RDMA/hns: Fix wrong PBL offset when VA is not aligned to PAGE_SIZE ROCE uses "VA % buf_page_size" to caclulate the offset in the PBL's first page, the actual PA corresponding to the MR's VA is equal to MR's PA plus this offset. The first PA in PBL has already been aligned to PAGE_SIZE after calling ib_umem_get(), but the MR's VA may not. If the buf_page_size is smaller than the PAGE_SIZE, this will lead the HW to access the wrong memory because the offset is smaller than expected. Fixes: 9b2cf76c9f05 ("RDMA/hns: Optimize PBL buffer allocation process") Link: https://lore.kernel.org/r/1594726935-45666-1-git-send-email-liweihang@huawei.com Signed-off-by: Xi Wang Signed-off-by: Weihang Li Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_mr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_mr.c b/drivers/infiniband/hw/hns/hns_roce_mr.c index 0e71ebee9e52..6b226a5eb7db 100644 --- a/drivers/infiniband/hw/hns/hns_roce_mr.c +++ b/drivers/infiniband/hw/hns/hns_roce_mr.c @@ -120,7 +120,7 @@ static int alloc_mr_pbl(struct hns_roce_dev *hr_dev, struct hns_roce_mr *mr, mr->pbl_hop_num = is_fast ? 1 : hr_dev->caps.pbl_hop_num; buf_attr.page_shift = is_fast ? PAGE_SHIFT : - hr_dev->caps.pbl_buf_pg_sz + HNS_HW_PAGE_SHIFT; + hr_dev->caps.pbl_buf_pg_sz + PAGE_SHIFT; buf_attr.region[0].size = length; buf_attr.region[0].hopnum = mr->pbl_hop_num; buf_attr.region_count = 1; -- cgit v1.2.3 From 0d1fd39bb27e479fb1de3dd4b4c247c7c9a1fabf Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Thu, 16 Jul 2020 13:20:59 +0300 Subject: RDMA/core: Fix race in rdma_alloc_commit_uobject() The FD should not be installed until all of the setup is completed as the fd_install() transfers ownership of the kref to the FD table. A thread can race a close() and trigger concurrent rdma_alloc_commit_uobject() and uverbs_uobject_fd_release() which, at least, triggers a safety WARN_ON: WARNING: CPU: 4 PID: 6913 at drivers/infiniband/core/rdma_core.c:768 uverbs_uobject_fd_release+0x202/0x230 Kernel panic - not syncing: panic_on_warn set ... CPU: 4 PID: 6913 Comm: syz-executor.3 Not tainted 5.7.0-rc2 #22 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [..] RIP: 0010:uverbs_uobject_fd_release+0x202/0x230 Code: fe 4c 89 e7 e8 af 23 fe ff e9 2a ff ff ff e8 c5 fa 61 fe be 03 00 00 00 4c 89 e7 e8 68 eb f5 fe e9 13 ff ff ff e8 ae fa 61 fe <0f> 0b eb ac e8 e5 aa 3c fe e8 50 2b 86 fe e9 6a fe ff ff e8 46 2b RSP: 0018:ffffc90008117d88 EFLAGS: 00010293 RAX: ffff88810e146580 RBX: 1ffff92001022fb1 RCX: ffffffff82d5b902 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88811951b040 RBP: ffff88811951b000 R08: ffffed10232a3609 R09: ffffed10232a3609 R10: ffff88811951b043 R11: 0000000000000001 R12: ffff888100a7c600 R13: ffff888100a7c650 R14: ffffc90008117da8 R15: ffffffff82d5b700 ? __uverbs_cleanup_ufile+0x270/0x270 ? uverbs_uobject_fd_release+0x202/0x230 ? uverbs_uobject_fd_release+0x202/0x230 ? __uverbs_cleanup_ufile+0x270/0x270 ? locks_remove_file+0x282/0x3d0 ? security_file_free+0xaa/0xd0 __fput+0x2be/0x770 task_work_run+0x10e/0x1b0 exit_to_usermode_loop+0x145/0x170 do_syscall_64+0x2d0/0x390 ? prepare_exit_to_usermode+0x17a/0x230 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x414da7 Code: 00 00 0f 05 48 3d 00 f0 ff ff 77 3f f3 c3 0f 1f 44 00 00 53 89 fb 48 83 ec 10 e8 f4 fb ff ff 89 df 89 c2 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2b 89 d7 89 44 24 0c e8 36 fc ff ff 8b 44 24 RSP: 002b:00007fff39d379d0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000414da7 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000003 RBP: 00007fff39d37a3c R08: 0000000400000000 R09: 0000000400000000 R10: 00007fff39d37910 R11: 0000000000000293 R12: 0000000000000001 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000003 Reorder so that fd_install() is the last thing done in rdma_alloc_commit_uobject(). Fixes: aba94548c9e4 ("IB/uverbs: Move the FD uobj type struct file allocation to alloc_commit") Link: https://lore.kernel.org/r/20200716102059.1420681-1-leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/rdma_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/core/rdma_core.c b/drivers/infiniband/core/rdma_core.c index 3027cd2fb247..6d3ed7c6e19e 100644 --- a/drivers/infiniband/core/rdma_core.c +++ b/drivers/infiniband/core/rdma_core.c @@ -649,9 +649,6 @@ void rdma_alloc_commit_uobject(struct ib_uobject *uobj, { struct ib_uverbs_file *ufile = attrs->ufile; - /* alloc_commit consumes the uobj kref */ - uobj->uapi_object->type_class->alloc_commit(uobj); - /* kref is held so long as the uobj is on the uobj list. */ uverbs_uobject_get(uobj); spin_lock_irq(&ufile->uobjects_lock); @@ -661,6 +658,9 @@ void rdma_alloc_commit_uobject(struct ib_uobject *uobj, /* matches atomic_set(-1) in alloc_uobj */ atomic_set(&uobj->usecnt, 0); + /* alloc_commit consumes the uobj kref */ + uobj->uapi_object->type_class->alloc_commit(uobj); + /* Matches the down_read in rdma_alloc_begin_uobject */ up_read(&ufile->hw_destroy_rwsem); } -- cgit v1.2.3 From 87c4c774cbef5c68b3df96827c2fb07f1aa80152 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Thu, 16 Jul 2020 13:55:19 +0300 Subject: RDMA/cm: Protect access to remote_sidr_table cm.lock must be held while accessing remote_sidr_table. This fixes the below NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 2 PID: 7288 Comm: udaddy Not tainted 5.7.0_for_upstream_perf_2020_06_09_15_14_20_38 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:rb_erase+0x10d/0x360 Code: 00 00 00 48 89 c1 48 89 d0 48 8b 50 08 48 39 ca 74 48 f6 02 01 75 af 48 8b 7a 10 48 89 c1 48 83 c9 01 48 89 78 08 48 89 42 10 <48> 89 0f 48 8b 08 48 89 0a 48 83 e1 fc 48 89 10 0f 84 b1 00 00 00 RSP: 0018:ffffc90000f77c30 EFLAGS: 00010086 RAX: ffff8883df27d458 RBX: ffff8883df27da58 RCX: ffff8883df27d459 RDX: ffff8883d183fa58 RSI: ffffffffa01e8d00 RDI: 0000000000000000 RBP: ffff8883d62ac800 R08: 0000000000000000 R09: 00000000000000ce R10: 000000000000000a R11: 0000000000000000 R12: ffff8883df27da00 R13: ffffc90000f77c98 R14: 0000000000000130 R15: 0000000000000000 FS: 00007f009f877740(0000) GS:ffff8883f1a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000003d467e003 CR4: 0000000000160ee0 Call Trace: cm_send_sidr_rep_locked+0x15a/0x1a0 [ib_cm] ib_send_cm_sidr_rep+0x2b/0x50 [ib_cm] cma_send_sidr_rep+0x8b/0xe0 [rdma_cm] __rdma_accept+0x21d/0x2b0 [rdma_cm] ? ucma_get_ctx+0x2b/0xe0 [rdma_ucm] ? _copy_from_user+0x30/0x60 ucma_accept+0x13e/0x1e0 [rdma_ucm] ucma_write+0xb4/0x130 [rdma_ucm] vfs_write+0xad/0x1a0 ksys_write+0x9d/0xb0 do_syscall_64+0x48/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f009ef60924 Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 2a ef 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83 RSP: 002b:00007fff843edf38 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000055743042e1d0 RCX: 00007f009ef60924 RDX: 0000000000000130 RSI: 00007fff843edf40 RDI: 0000000000000003 RBP: 00007fff843ee0e0 R08: 0000000000000000 R09: 0000557430433090 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff843edf40 R14: 000000000000038c R15: 00000000ffffff00 CR2: 0000000000000000 Fixes: 6a8824a74bc9 ("RDMA/cm: Allow ib_send_cm_sidr_rep() to be done under lock") Link: https://lore.kernel.org/r/20200716105519.1424266-1-leon@kernel.org Signed-off-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/cm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 0d1377232933..dc0558b23158 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -3676,10 +3676,12 @@ static int cm_send_sidr_rep_locked(struct cm_id_private *cm_id_priv, return ret; } cm_id_priv->id.state = IB_CM_IDLE; + spin_lock_irq(&cm.lock); if (!RB_EMPTY_NODE(&cm_id_priv->sidr_id_node)) { rb_erase(&cm_id_priv->sidr_id_node, &cm.remote_sidr_table); RB_CLEAR_NODE(&cm_id_priv->sidr_id_node); } + spin_unlock_irq(&cm.lock); return 0; } -- cgit v1.2.3 From 05b29021fba5e725dd385151ef00b6340229b500 Mon Sep 17 00:00:00 2001 From: Anthony Iliopoulos Date: Tue, 14 Jul 2020 13:11:59 +0200 Subject: nvme: explicitly update mpath disk capacity on revalidation Commit 3b4b19721ec652 ("nvme: fix possible deadlock when I/O is blocked") reverted multipath head disk revalidation due to deadlocks caused by holding the bd_mutex during revalidate. Updating the multipath disk blockdev size is still required though for userspace to be able to observe any resizing while the device is mounted. Directly update the bdev inode size to avoid unnecessarily holding the bdev->bd_mutex. Fixes: 3b4b19721ec652 ("nvme: fix possible deadlock when I/O is blocked") Signed-off-by: Anthony Iliopoulos Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 1 + drivers/nvme/host/nvme.h | 13 +++++++++++++ 2 files changed, 14 insertions(+) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 8410d03b940d..add040168e67 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1980,6 +1980,7 @@ static int __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id) if (ns->head->disk) { nvme_update_disk_info(ns->head->disk, ns, id); blk_queue_stack_limits(ns->head->disk->queue, ns->queue); + nvme_mpath_update_disk_size(ns->head->disk); } #endif return 0; diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 2ef8d501e2a8..1de3f9b827aa 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -604,6 +604,16 @@ static inline void nvme_trace_bio_complete(struct request *req, trace_block_bio_complete(ns->head->disk->queue, req->bio); } +static inline void nvme_mpath_update_disk_size(struct gendisk *disk) +{ + struct block_device *bdev = bdget_disk(disk, 0); + + if (bdev) { + bd_set_size(bdev, get_capacity(disk) << SECTOR_SHIFT); + bdput(bdev); + } +} + extern struct device_attribute dev_attr_ana_grpid; extern struct device_attribute dev_attr_ana_state; extern struct device_attribute subsys_attr_iopolicy; @@ -679,6 +689,9 @@ static inline void nvme_mpath_wait_freeze(struct nvme_subsystem *subsys) static inline void nvme_mpath_start_freeze(struct nvme_subsystem *subsys) { } +static inline void nvme_mpath_update_disk_size(struct gendisk *disk) +{ +} #endif /* CONFIG_NVME_MULTIPATH */ #ifdef CONFIG_NVM -- cgit v1.2.3 From 6ee93f8df09c470da1a4af11e394c52d7b62418c Mon Sep 17 00:00:00 2001 From: Jian Cai Date: Tue, 14 Jul 2020 16:30:21 -0700 Subject: x86/entry: Add compatibility with IAS Clang's integrated assembler does not allow symbols with non-absolute values to be reassigned. Modify the interrupt entry loop macro to be compatible with IAS by using a label and an offset. Reported-by: Nick Desaulniers Reported-by: Sedat Dilek Suggested-by: Nick Desaulniers Suggested-by: Brian Gerst Suggested-by: Arvind Sankar Signed-off-by: Jian Cai Signed-off-by: Thomas Gleixner Tested-by: Sedat Dilek # Link: https://github.com/ClangBuiltLinux/linux/issues/1043 Link: https://lkml.kernel.org/r/20200714233024.1789985-1-caij2003@gmail.com --- arch/x86/include/asm/idtentry.h | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/x86/include/asm/idtentry.h b/arch/x86/include/asm/idtentry.h index f3d70830bf2a..5efaaed34eda 100644 --- a/arch/x86/include/asm/idtentry.h +++ b/arch/x86/include/asm/idtentry.h @@ -469,16 +469,15 @@ __visible noinstr void func(struct pt_regs *regs, \ .align 8 SYM_CODE_START(irq_entries_start) vector=FIRST_EXTERNAL_VECTOR - pos = . .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR) UNWIND_HINT_IRET_REGS +0 : .byte 0x6a, vector jmp asm_common_interrupt nop /* Ensure that the above is 8 bytes max */ - . = pos + 8 - pos=pos+8 - vector=vector+1 + . = 0b + 8 + vector = vector+1 .endr SYM_CODE_END(irq_entries_start) @@ -486,16 +485,15 @@ SYM_CODE_END(irq_entries_start) .align 8 SYM_CODE_START(spurious_entries_start) vector=FIRST_SYSTEM_VECTOR - pos = . .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR) UNWIND_HINT_IRET_REGS +0 : .byte 0x6a, vector jmp asm_spurious_interrupt nop /* Ensure that the above is 8 bytes max */ - . = pos + 8 - pos=pos+8 - vector=vector+1 + . = 0b + 8 + vector = vector+1 .endr SYM_CODE_END(spurious_entries_start) #endif -- cgit v1.2.3 From 5769fe26f389b0002ed48fd16d642a1d86edaf79 Mon Sep 17 00:00:00 2001 From: Sedat Dilek Date: Tue, 14 Jul 2020 21:47:40 +0200 Subject: x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV When assembling with Clang via `make LLVM_IAS=1` and CONFIG_HYPERV enabled, we observe the following error: :9:6: error: expected absolute expression .if HYPERVISOR_REENLIGHTENMENT_VECTOR == 3 ^ :1:1: note: while in macro instantiation idtentry HYPERVISOR_REENLIGHTENMENT_VECTOR asm_sysvec_hyperv_reenlightenment sysvec_hyperv_reenlightenment has_error_code=0 ^ ./arch/x86/include/asm/idtentry.h:627:1: note: while in macro instantiation idtentry_sysvec HYPERVISOR_REENLIGHTENMENT_VECTOR sysvec_hyperv_reenlightenment; ^ :9:6: error: expected absolute expression .if HYPERVISOR_STIMER0_VECTOR == 3 ^ :1:1: note: while in macro instantiation idtentry HYPERVISOR_STIMER0_VECTOR asm_sysvec_hyperv_stimer0 sysvec_hyperv_stimer0 has_error_code=0 ^ ./arch/x86/include/asm/idtentry.h:628:1: note: while in macro instantiation idtentry_sysvec HYPERVISOR_STIMER0_VECTOR sysvec_hyperv_stimer0; This is caused by typos in arch/x86/include/asm/idtentry.h: HYPERVISOR_REENLIGHTENMENT_VECTOR -> HYPERV_REENLIGHTENMENT_VECTOR HYPERVISOR_STIMER0_VECTOR -> HYPERV_STIMER0_VECTOR For more details see ClangBuiltLinux issue #1088. Fixes: a16be368dd3f ("x86/entry: Convert various hypervisor vectors to IDTENTRY_SYSVEC") Suggested-by: Nick Desaulniers Signed-off-by: Sedat Dilek Signed-off-by: Thomas Gleixner Reviewed-by: Nathan Chancellor Reviewed-by: Wei Liu Reviewed-by: Nick Desaulniers Link: https://github.com/ClangBuiltLinux/linux/issues/1088 Link: https://github.com/ClangBuiltLinux/linux/issues/1043 Link: https://lore.kernel.org/patchwork/patch/1272115/ Link: https://lkml.kernel.org/r/20200714194740.4548-1-sedat.dilek@gmail.com --- arch/x86/include/asm/idtentry.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/idtentry.h b/arch/x86/include/asm/idtentry.h index 5efaaed34eda..80d3b30d3ee3 100644 --- a/arch/x86/include/asm/idtentry.h +++ b/arch/x86/include/asm/idtentry.h @@ -624,8 +624,8 @@ DECLARE_IDTENTRY_SYSVEC(POSTED_INTR_NESTED_VECTOR, sysvec_kvm_posted_intr_nested #if IS_ENABLED(CONFIG_HYPERV) DECLARE_IDTENTRY_SYSVEC(HYPERVISOR_CALLBACK_VECTOR, sysvec_hyperv_callback); -DECLARE_IDTENTRY_SYSVEC(HYPERVISOR_REENLIGHTENMENT_VECTOR, sysvec_hyperv_reenlightenment); -DECLARE_IDTENTRY_SYSVEC(HYPERVISOR_STIMER0_VECTOR, sysvec_hyperv_stimer0); +DECLARE_IDTENTRY_SYSVEC(HYPERV_REENLIGHTENMENT_VECTOR, sysvec_hyperv_reenlightenment); +DECLARE_IDTENTRY_SYSVEC(HYPERV_STIMER0_VECTOR, sysvec_hyperv_stimer0); #endif #if IS_ENABLED(CONFIG_ACRN_GUEST) -- cgit v1.2.3 From 81e96851ea32deb2c921c870eecabf335f598aeb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 27 May 2020 15:53:46 +0200 Subject: x86: math-emu: Fix up 'cmp' insn for clang ias The clang integrated assembler requires the 'cmp' instruction to have a length prefix here: arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl') cmp $0xffffffff,-24(%ebp) ^ Make this a 32-bit comparison, which it was clearly meant to be. Signed-off-by: Arnd Bergmann Signed-off-by: Thomas Gleixner Reviewed-by: Nick Desaulniers Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.de --- arch/x86/math-emu/wm_sqrt.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/math-emu/wm_sqrt.S b/arch/x86/math-emu/wm_sqrt.S index 3b2b58164ec1..40526dd85137 100644 --- a/arch/x86/math-emu/wm_sqrt.S +++ b/arch/x86/math-emu/wm_sqrt.S @@ -209,7 +209,7 @@ sqrt_stage_2_finish: #ifdef PARANOID /* It should be possible to get here only if the arg is ffff....ffff */ - cmp $0xffffffff,FPU_fsqrt_arg_1 + cmpl $0xffffffff,FPU_fsqrt_arg_1 jnz sqrt_stage_2_error #endif /* PARANOID */ -- cgit v1.2.3 From 340746398b67e3ce5019698748ebaa7adf048114 Mon Sep 17 00:00:00 2001 From: Sergey Organov Date: Tue, 14 Jul 2020 19:28:02 +0300 Subject: net: fec: fix hardware time stamping by external devices Fix support for external PTP-aware devices such as DSA or PTP PHY: Make sure we never time stamp tx packets when hardware time stamping is disabled. Check for PTP PHY being in use and then pass ioctls related to time stamping of Ethernet packets to the PTP PHY rather than handle them ourselves. In addition, disable our own hardware time stamping in this case. Fixes: 6605b730c061 ("FEC: Add time stamping code and a PTP hardware clock") Signed-off-by: Sergey Organov Acked-by: Richard Cochran Acked-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/fec.h | 1 + drivers/net/ethernet/freescale/fec_main.c | 23 +++++++++++++++++------ drivers/net/ethernet/freescale/fec_ptp.c | 12 ++++++++++++ 3 files changed, 30 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index d8d76da51c5e..832a2175636d 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -590,6 +590,7 @@ struct fec_enet_private { void fec_ptp_init(struct platform_device *pdev, int irq_idx); void fec_ptp_stop(struct platform_device *pdev); void fec_ptp_start_cyclecounter(struct net_device *ndev); +void fec_ptp_disable_hwts(struct net_device *ndev); int fec_ptp_set(struct net_device *ndev, struct ifreq *ifr); int fec_ptp_get(struct net_device *ndev, struct ifreq *ifr); diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 3982285ed020..cc7fbfc09354 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -1294,8 +1294,13 @@ fec_enet_tx_queue(struct net_device *ndev, u16 queue_id) ndev->stats.tx_bytes += skb->len; } - if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS) && - fep->bufdesc_ex) { + /* NOTE: SKBTX_IN_PROGRESS being set does not imply it's we who + * are to time stamp the packet, so we still need to check time + * stamping enabled flag. + */ + if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS && + fep->hwts_tx_en) && + fep->bufdesc_ex) { struct skb_shared_hwtstamps shhwtstamps; struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; @@ -2723,10 +2728,16 @@ static int fec_enet_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) return -ENODEV; if (fep->bufdesc_ex) { - if (cmd == SIOCSHWTSTAMP) - return fec_ptp_set(ndev, rq); - if (cmd == SIOCGHWTSTAMP) - return fec_ptp_get(ndev, rq); + bool use_fec_hwts = !phy_has_hwtstamp(phydev); + + if (cmd == SIOCSHWTSTAMP) { + if (use_fec_hwts) + return fec_ptp_set(ndev, rq); + fec_ptp_disable_hwts(ndev); + } else if (cmd == SIOCGHWTSTAMP) { + if (use_fec_hwts) + return fec_ptp_get(ndev, rq); + } } return phy_mii_ioctl(phydev, rq, cmd); diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index 945643c02615..f8a592c96beb 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -452,6 +452,18 @@ static int fec_ptp_enable(struct ptp_clock_info *ptp, return -EOPNOTSUPP; } +/** + * fec_ptp_disable_hwts - disable hardware time stamping + * @ndev: pointer to net_device + */ +void fec_ptp_disable_hwts(struct net_device *ndev) +{ + struct fec_enet_private *fep = netdev_priv(ndev); + + fep->hwts_tx_en = 0; + fep->hwts_rx_en = 0; +} + int fec_ptp_set(struct net_device *ndev, struct ifreq *ifr) { struct fec_enet_private *fep = netdev_priv(ndev); -- cgit v1.2.3 From b3df80ab6d147d4738be242e1c91e5fdbb6b03ef Mon Sep 17 00:00:00 2001 From: Jing Xiangfeng Date: Tue, 14 Jul 2020 16:09:18 +0800 Subject: ASoC: Intel: bytcht_es8316: Add missed put_device() snd_byt_cht_es8316_mc_probe() misses to call put_device() in an error path. Add the missed function call to fix it. Fixes: ba49cf6f8e4a ("ASoC: Intel: bytcht_es8316: Add quirk for inverted jack detect") Signed-off-by: Jing Xiangfeng Reviewed-by: Hans de Goede Acked-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200714080918.148196-1-jingxiangfeng@huawei.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcht_es8316.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index 9e5fc9430628..ecbc58e8a37f 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -543,8 +543,10 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) if (cnt) { ret = device_add_properties(codec_dev, props); - if (ret) + if (ret) { + put_device(codec_dev); return ret; + } } devm_acpi_dev_add_driver_gpios(codec_dev, byt_cht_es8316_gpios); -- cgit v1.2.3 From fe0a53044b4bce947045eadd7fa1adbc4685afab Mon Sep 17 00:00:00 2001 From: Oder Chiou Date: Thu, 16 Jul 2020 11:01:23 +0800 Subject: ASoC: rt5682: Report the button event in the headset type only The irq work will be manipulated by resume function, and it will report the wrong jack type while the jack type is headphone in the button event. Signed-off-by: Oder Chiou Link: https://lore.kernel.org/r/20200716030123.27122-1-oder_chiou@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt5682.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index 5adfaf3a7134..d503b5bef4ba 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -1082,7 +1082,8 @@ void rt5682_jack_detect_handler(struct work_struct *work) /* jack was out, report jack type */ rt5682->jack_type = rt5682_headset_detect(rt5682->component, 1); - } else { + } else if ((rt5682->jack_type & SND_JACK_HEADSET) == + SND_JACK_HEADSET) { /* jack is already in, report button event */ rt5682->jack_type = SND_JACK_HEADSET; btn_type = rt5682_button_detect(rt5682->component); -- cgit v1.2.3 From 299632e54b2e692d2830af84be51172480dc1e26 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 15 Jul 2020 16:46:15 -0700 Subject: regmap: debugfs: Don't sleep while atomic for fast_io regmaps If a regmap has "fast_io" set then its lock function uses a spinlock. That doesn't work so well with the functions: * regmap_cache_only_write_file() * regmap_cache_bypass_write_file() Both of the above functions have the pattern: 1. Lock the regmap. 2. Call: debugfs_write_file_bool() copy_from_user() __might_fault() __might_sleep() Let's reorder things a bit so that we do all of our sleepable functions before we grab the lock. Fixes: d3dc5430d68f ("regmap: debugfs: Allow writes to cache state settings") Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20200715164611.1.I35b3533e8a80efde0cec1cc70f71e1e74b2fa0da@changeid Signed-off-by: Mark Brown --- drivers/base/regmap/regmap-debugfs.c | 52 ++++++++++++++++++++---------------- 1 file changed, 29 insertions(+), 23 deletions(-) diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index e72843fe41df..e16afa27700d 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -457,29 +457,31 @@ static ssize_t regmap_cache_only_write_file(struct file *file, { struct regmap *map = container_of(file->private_data, struct regmap, cache_only); - ssize_t result; - bool was_enabled, require_sync = false; + bool new_val, require_sync = false; int err; - map->lock(map->lock_arg); + err = kstrtobool_from_user(user_buf, count, &new_val); + /* Ignore malforned data like debugfs_write_file_bool() */ + if (err) + return count; - was_enabled = map->cache_only; + err = debugfs_file_get(file->f_path.dentry); + if (err) + return err; - result = debugfs_write_file_bool(file, user_buf, count, ppos); - if (result < 0) { - map->unlock(map->lock_arg); - return result; - } + map->lock(map->lock_arg); - if (map->cache_only && !was_enabled) { + if (new_val && !map->cache_only) { dev_warn(map->dev, "debugfs cache_only=Y forced\n"); add_taint(TAINT_USER, LOCKDEP_STILL_OK); - } else if (!map->cache_only && was_enabled) { + } else if (!new_val && map->cache_only) { dev_warn(map->dev, "debugfs cache_only=N forced: syncing cache\n"); require_sync = true; } + map->cache_only = new_val; map->unlock(map->lock_arg); + debugfs_file_put(file->f_path.dentry); if (require_sync) { err = regcache_sync(map); @@ -487,7 +489,7 @@ static ssize_t regmap_cache_only_write_file(struct file *file, dev_err(map->dev, "Failed to sync cache %d\n", err); } - return result; + return count; } static const struct file_operations regmap_cache_only_fops = { @@ -502,28 +504,32 @@ static ssize_t regmap_cache_bypass_write_file(struct file *file, { struct regmap *map = container_of(file->private_data, struct regmap, cache_bypass); - ssize_t result; - bool was_enabled; + bool new_val; + int err; - map->lock(map->lock_arg); + err = kstrtobool_from_user(user_buf, count, &new_val); + /* Ignore malforned data like debugfs_write_file_bool() */ + if (err) + return count; - was_enabled = map->cache_bypass; + err = debugfs_file_get(file->f_path.dentry); + if (err) + return err; - result = debugfs_write_file_bool(file, user_buf, count, ppos); - if (result < 0) - goto out; + map->lock(map->lock_arg); - if (map->cache_bypass && !was_enabled) { + if (new_val && !map->cache_bypass) { dev_warn(map->dev, "debugfs cache_bypass=Y forced\n"); add_taint(TAINT_USER, LOCKDEP_STILL_OK); - } else if (!map->cache_bypass && was_enabled) { + } else if (!new_val && map->cache_bypass) { dev_warn(map->dev, "debugfs cache_bypass=N forced\n"); } + map->cache_bypass = new_val; -out: map->unlock(map->lock_arg); + debugfs_file_put(file->f_path.dentry); - return result; + return count; } static const struct file_operations regmap_cache_bypass_fops = { -- cgit v1.2.3 From 473309fb8372365ad211f425bca760af800e10a7 Mon Sep 17 00:00:00 2001 From: Sergey Organov Date: Wed, 15 Jul 2020 19:10:00 +0300 Subject: net: dp83640: fix SIOCSHWTSTAMP to update the struct with actual configuration From Documentation/networking/timestamping.txt: A driver which supports hardware time stamping shall update the struct with the actual, possibly more permissive configuration. Do update the struct passed when we upscale the requested time stamping mode. Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by: Sergey Organov Acked-by: Richard Cochran Signed-off-by: Jakub Kicinski --- drivers/net/phy/dp83640.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index ecbd5e0d685c..acb0aae60755 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -1260,6 +1260,7 @@ static int dp83640_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr) dp83640->hwts_rx_en = 1; dp83640->layer = PTP_CLASS_L4; dp83640->version = PTP_CLASS_V1; + cfg.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; break; case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: @@ -1267,6 +1268,7 @@ static int dp83640_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr) dp83640->hwts_rx_en = 1; dp83640->layer = PTP_CLASS_L4; dp83640->version = PTP_CLASS_V2; + cfg.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT; break; case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: @@ -1274,6 +1276,7 @@ static int dp83640_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr) dp83640->hwts_rx_en = 1; dp83640->layer = PTP_CLASS_L2; dp83640->version = PTP_CLASS_V2; + cfg.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; break; case HWTSTAMP_FILTER_PTP_V2_EVENT: case HWTSTAMP_FILTER_PTP_V2_SYNC: @@ -1281,6 +1284,7 @@ static int dp83640_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr) dp83640->hwts_rx_en = 1; dp83640->layer = PTP_CLASS_L4 | PTP_CLASS_L2; dp83640->version = PTP_CLASS_V2; + cfg.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; break; default: return -ERANGE; -- cgit v1.2.3 From 01cfcde9c26d8555f0e6e9aea9d6049f87683998 Mon Sep 17 00:00:00 2001 From: Vincent Guittot Date: Fri, 10 Jul 2020 17:24:26 +0200 Subject: sched/fair: handle case of task_h_load() returning 0 task_h_load() can return 0 in some situations like running stress-ng mmapfork, which forks thousands of threads, in a sched group on a 224 cores system. The load balance doesn't handle this correctly because env->imbalance never decreases and it will stop pulling tasks only after reaching loop_max, which can be equal to the number of running tasks of the cfs. Make sure that imbalance will be decreased by at least 1. misfit task is the other feature that doesn't handle correctly such situation although it's probably more difficult to face the problem because of the smaller number of CPUs and running tasks on heterogenous system. We can't simply ensure that task_h_load() returns at least one because it would imply to handle underflow in other places. Signed-off-by: Vincent Guittot Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Valentin Schneider Reviewed-by: Dietmar Eggemann Tested-by: Dietmar Eggemann Cc: # v4.4+ Link: https://lkml.kernel.org/r/20200710152426.16981-1-vincent.guittot@linaro.org --- kernel/sched/fair.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 658aa7a2ae6f..04fa8dbcfa4d 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -4039,7 +4039,11 @@ static inline void update_misfit_status(struct task_struct *p, struct rq *rq) return; } - rq->misfit_task_load = task_h_load(p); + /* + * Make sure that misfit_task_load will not be null even if + * task_h_load() returns 0. + */ + rq->misfit_task_load = max_t(unsigned long, task_h_load(p), 1); } #else /* CONFIG_SMP */ @@ -7638,7 +7642,14 @@ static int detach_tasks(struct lb_env *env) switch (env->migration_type) { case migrate_load: - load = task_h_load(p); + /* + * Depending of the number of CPUs and tasks and the + * cgroup hierarchy, task_h_load() can return a null + * value. Make sure that env->imbalance decreases + * otherwise detach_tasks() will stop only after + * detaching up to loop_max tasks. + */ + load = max_t(unsigned long, task_h_load(p), 1); if (sched_feat(LB_MIN) && load < 16 && !env->sd->nr_balance_failed) -- cgit v1.2.3 From 60379ba08532eca861e933b389526a4dc89e0c42 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 17 Jul 2020 10:40:23 +0200 Subject: ALSA: info: Drop WARN_ON() from buffer NULL sanity check snd_info_get_line() has a sanity check of NULL buffer -- both buffer itself being NULL and buffer->buffer being NULL. Basically both checks are valid and necessary, but the problem is that it's with snd_BUG_ON() macro that triggers WARN_ON(). The latter condition (NULL buffer->buffer) can be met arbitrarily by user since the buffer is allocated at the first write, so it means that user can trigger WARN_ON() at will. This patch addresses it by simply moving buffer->buffer NULL check out of snd_BUG_ON() so that spurious WARNING is no longer triggered. Reported-by: syzbot+e42d0746c3c3699b6061@syzkaller.appspotmail.com Cc: Link: https://lore.kernel.org/r/20200717084023.5928-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/core/info.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/core/info.c b/sound/core/info.c index 8c6bc5241df5..9fec3070f8ba 100644 --- a/sound/core/info.c +++ b/sound/core/info.c @@ -606,7 +606,9 @@ int snd_info_get_line(struct snd_info_buffer *buffer, char *line, int len) { int c; - if (snd_BUG_ON(!buffer || !buffer->buffer)) + if (snd_BUG_ON(!buffer)) + return 1; + if (!buffer->buffer) return 1; if (len <= 0 || buffer->stop || buffer->error) return 1; -- cgit v1.2.3 From bd024e82e4cd95c7f1a475a55f99871936c2b2db Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 Jul 2020 12:28:16 +0100 Subject: asm-generic/mmiowb: Allow mmiowb_set_pending() when preemptible() Although mmiowb() is concerned only with serialising MMIO writes occuring in contexts where a spinlock is held, the call to mmiowb_set_pending() from the MMIO write accessors can occur in preemptible contexts, such as during driver probe() functions where ordering between CPUs is not usually a concern, assuming that the task migration path provides the necessary ordering guarantees. Unfortunately, the default implementation of mmiowb_set_pending() is not preempt-safe, as it makes use of a a per-cpu variable to track its internal state. This has been reported to generate the following splat on riscv: | BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 | caller is regmap_mmio_write32le+0x1c/0x46 | CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3-hfu+ #1 | Call Trace: | walk_stackframe+0x0/0x7a | dump_stack+0x6e/0x88 | regmap_mmio_write32le+0x18/0x46 | check_preemption_disabled+0xa4/0xaa | regmap_mmio_write32le+0x18/0x46 | regmap_mmio_write+0x26/0x44 | regmap_write+0x28/0x48 | sifive_gpio_probe+0xc0/0x1da Although it's possible to fix the driver in this case, other splats have been seen from other drivers, including the infamous 8250 UART, and so it's better to address this problem in the mmiowb core itself. Fix mmiowb_set_pending() by using the raw_cpu_ptr() to get at the mmiowb state and then only updating the 'mmiowb_pending' field if we are not preemptible (i.e. we have a non-zero nesting count). Cc: Arnd Bergmann Cc: Paul Walmsley Cc: Guo Ren Cc: Michael Ellerman Reported-by: Palmer Dabbelt Reported-by: Emil Renner Berthing Tested-by: Emil Renner Berthing Reviewed-by: Palmer Dabbelt Acked-by: Palmer Dabbelt Link: https://lore.kernel.org/r/20200716112816.7356-1-will@kernel.org Signed-off-by: Will Deacon --- include/asm-generic/mmiowb.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/include/asm-generic/mmiowb.h b/include/asm-generic/mmiowb.h index 9439ff037b2d..5698fca3bf56 100644 --- a/include/asm-generic/mmiowb.h +++ b/include/asm-generic/mmiowb.h @@ -27,7 +27,7 @@ #include DECLARE_PER_CPU(struct mmiowb_state, __mmiowb_state); -#define __mmiowb_state() this_cpu_ptr(&__mmiowb_state) +#define __mmiowb_state() raw_cpu_ptr(&__mmiowb_state) #else #define __mmiowb_state() arch_mmiowb_state() #endif /* arch_mmiowb_state */ @@ -35,7 +35,9 @@ DECLARE_PER_CPU(struct mmiowb_state, __mmiowb_state); static inline void mmiowb_set_pending(void) { struct mmiowb_state *ms = __mmiowb_state(); - ms->mmiowb_pending = ms->nesting_count; + + if (likely(ms->nesting_count)) + ms->mmiowb_pending = ms->nesting_count; } static inline void mmiowb_spin_lock(void) -- cgit v1.2.3 From 66673f96f0f968b991dc38be06102246919c663c Mon Sep 17 00:00:00 2001 From: Liu Jian Date: Fri, 17 Jul 2020 17:01:21 +0800 Subject: ieee802154: fix one possible memleak in adf7242_probe When probe fail, we should destroy the workqueue. Fixes: 2795e8c25161 ("net: ieee802154: fix a potential NULL pointer dereference") Signed-off-by: Liu Jian Acked-by: Michael Hennerich Link: https://lore.kernel.org/r/20200717090121.2143-1-liujian56@huawei.com Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/adf7242.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c index 5a37514e4234..8dbccec6ac86 100644 --- a/drivers/net/ieee802154/adf7242.c +++ b/drivers/net/ieee802154/adf7242.c @@ -1262,7 +1262,7 @@ static int adf7242_probe(struct spi_device *spi) WQ_MEM_RECLAIM); if (unlikely(!lp->wqueue)) { ret = -ENOMEM; - goto err_hw_init; + goto err_alloc_wq; } ret = adf7242_hw_init(lp); @@ -1294,6 +1294,8 @@ static int adf7242_probe(struct spi_device *spi) return ret; err_hw_init: + destroy_workqueue(lp->wqueue); +err_alloc_wq: mutex_destroy(&lp->bmux); ieee802154_free_hw(lp->hw); -- cgit v1.2.3 From f32ed8eb0e3f0d0ef4ddb854554d60ca5863a9f9 Mon Sep 17 00:00:00 2001 From: Qi Liu Date: Fri, 17 Jul 2020 16:49:23 +0800 Subject: drivers/perf: Prevent forced unbinding of PMU drivers Forcefully unbinding PMU drivers during perf sampling will lead to a kernel panic, because the perf upper-layer framework call a NULL pointer in this situation. To solve this issue, "suppress_bind_attrs" should be set to true, so that bind/unbind can be disabled via sysfs and prevent unbinding PMU drivers during perf sampling. Signed-off-by: Qi Liu Reviewed-by: John Garry Link: https://lore.kernel.org/r/1594975763-32966-1-git-send-email-liuqi115@huawei.com Signed-off-by: Will Deacon --- drivers/perf/arm-cci.c | 1 + drivers/perf/arm-ccn.c | 1 + drivers/perf/arm_dsu_pmu.c | 1 + drivers/perf/arm_smmuv3_pmu.c | 1 + drivers/perf/arm_spe_pmu.c | 1 + drivers/perf/fsl_imx8_ddr_perf.c | 1 + drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 1 + drivers/perf/qcom_l2_pmu.c | 1 + drivers/perf/qcom_l3_pmu.c | 1 + drivers/perf/thunderx2_pmu.c | 1 + drivers/perf/xgene_pmu.c | 1 + 13 files changed, 13 insertions(+) diff --git a/drivers/perf/arm-cci.c b/drivers/perf/arm-cci.c index 1b8e337a29ca..87c4be9dd412 100644 --- a/drivers/perf/arm-cci.c +++ b/drivers/perf/arm-cci.c @@ -1718,6 +1718,7 @@ static struct platform_driver cci_pmu_driver = { .driver = { .name = DRIVER_NAME, .of_match_table = arm_cci_pmu_matches, + .suppress_bind_attrs = true, }, .probe = cci_pmu_probe, .remove = cci_pmu_remove, diff --git a/drivers/perf/arm-ccn.c b/drivers/perf/arm-ccn.c index d50edef91f59..7b7d23f25713 100644 --- a/drivers/perf/arm-ccn.c +++ b/drivers/perf/arm-ccn.c @@ -1545,6 +1545,7 @@ static struct platform_driver arm_ccn_driver = { .driver = { .name = "arm-ccn", .of_match_table = arm_ccn_match, + .suppress_bind_attrs = true, }, .probe = arm_ccn_probe, .remove = arm_ccn_remove, diff --git a/drivers/perf/arm_dsu_pmu.c b/drivers/perf/arm_dsu_pmu.c index 518d0603e24f..96ed93cc78e6 100644 --- a/drivers/perf/arm_dsu_pmu.c +++ b/drivers/perf/arm_dsu_pmu.c @@ -757,6 +757,7 @@ static struct platform_driver dsu_pmu_driver = { .driver = { .name = DRVNAME, .of_match_table = of_match_ptr(dsu_pmu_of_match), + .suppress_bind_attrs = true, }, .probe = dsu_pmu_device_probe, .remove = dsu_pmu_device_remove, diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c index 90caba56dfbc..4cdb35d166ac 100644 --- a/drivers/perf/arm_smmuv3_pmu.c +++ b/drivers/perf/arm_smmuv3_pmu.c @@ -860,6 +860,7 @@ static void smmu_pmu_shutdown(struct platform_device *pdev) static struct platform_driver smmu_pmu_driver = { .driver = { .name = "arm-smmu-v3-pmcg", + .suppress_bind_attrs = true, }, .probe = smmu_pmu_probe, .remove = smmu_pmu_remove, diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c index d80f48798bce..e51ddb6d63ed 100644 --- a/drivers/perf/arm_spe_pmu.c +++ b/drivers/perf/arm_spe_pmu.c @@ -1226,6 +1226,7 @@ static struct platform_driver arm_spe_pmu_driver = { .driver = { .name = DRVNAME, .of_match_table = of_match_ptr(arm_spe_pmu_of_match), + .suppress_bind_attrs = true, }, .probe = arm_spe_pmu_device_probe, .remove = arm_spe_pmu_device_remove, diff --git a/drivers/perf/fsl_imx8_ddr_perf.c b/drivers/perf/fsl_imx8_ddr_perf.c index 2aed2d96f8ae..397540a4b799 100644 --- a/drivers/perf/fsl_imx8_ddr_perf.c +++ b/drivers/perf/fsl_imx8_ddr_perf.c @@ -707,6 +707,7 @@ static struct platform_driver imx_ddr_pmu_driver = { .driver = { .name = "imx-ddr-pmu", .of_match_table = imx_ddr_pmu_dt_ids, + .suppress_bind_attrs = true, }, .probe = ddr_perf_probe, .remove = ddr_perf_remove, diff --git a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c index 71587f19fcd5..5e3645c96443 100644 --- a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c @@ -419,6 +419,7 @@ static struct platform_driver hisi_ddrc_pmu_driver = { .driver = { .name = "hisi_ddrc_pmu", .acpi_match_table = ACPI_PTR(hisi_ddrc_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = hisi_ddrc_pmu_probe, .remove = hisi_ddrc_pmu_remove, diff --git a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c index c199de7b219d..5eb8168029c0 100644 --- a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c @@ -431,6 +431,7 @@ static struct platform_driver hisi_hha_pmu_driver = { .driver = { .name = "hisi_hha_pmu", .acpi_match_table = ACPI_PTR(hisi_hha_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = hisi_hha_pmu_probe, .remove = hisi_hha_pmu_remove, diff --git a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c index 567d7e6f69d8..3e8b5eab5514 100644 --- a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c @@ -421,6 +421,7 @@ static struct platform_driver hisi_l3c_pmu_driver = { .driver = { .name = "hisi_l3c_pmu", .acpi_match_table = ACPI_PTR(hisi_l3c_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = hisi_l3c_pmu_probe, .remove = hisi_l3c_pmu_remove, diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c index 21d6991dbe0b..4da37f650f98 100644 --- a/drivers/perf/qcom_l2_pmu.c +++ b/drivers/perf/qcom_l2_pmu.c @@ -1028,6 +1028,7 @@ static struct platform_driver l2_cache_pmu_driver = { .driver = { .name = "qcom-l2cache-pmu", .acpi_match_table = ACPI_PTR(l2_cache_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = l2_cache_pmu_probe, .remove = l2_cache_pmu_remove, diff --git a/drivers/perf/qcom_l3_pmu.c b/drivers/perf/qcom_l3_pmu.c index 656e830798d9..9ddb577c542b 100644 --- a/drivers/perf/qcom_l3_pmu.c +++ b/drivers/perf/qcom_l3_pmu.c @@ -814,6 +814,7 @@ static struct platform_driver qcom_l3_cache_pmu_driver = { .driver = { .name = "qcom-l3cache-pmu", .acpi_match_table = ACPI_PTR(qcom_l3_cache_pmu_acpi_match), + .suppress_bind_attrs = true, }, .probe = qcom_l3_cache_pmu_probe, }; diff --git a/drivers/perf/thunderx2_pmu.c b/drivers/perf/thunderx2_pmu.c index 51b31d6ff2c4..aac9823b0c6b 100644 --- a/drivers/perf/thunderx2_pmu.c +++ b/drivers/perf/thunderx2_pmu.c @@ -1017,6 +1017,7 @@ static struct platform_driver tx2_uncore_driver = { .driver = { .name = "tx2-uncore-pmu", .acpi_match_table = ACPI_PTR(tx2_uncore_acpi_match), + .suppress_bind_attrs = true, }, .probe = tx2_uncore_probe, .remove = tx2_uncore_remove, diff --git a/drivers/perf/xgene_pmu.c b/drivers/perf/xgene_pmu.c index 46ee6807d533..edac28cd25dd 100644 --- a/drivers/perf/xgene_pmu.c +++ b/drivers/perf/xgene_pmu.c @@ -1975,6 +1975,7 @@ static struct platform_driver xgene_pmu_driver = { .name = "xgene-pmu", .of_match_table = xgene_pmu_of_match, .acpi_match_table = ACPI_PTR(xgene_pmu_acpi_match), + .suppress_bind_attrs = true, }, }; -- cgit v1.2.3 From baa1841eb797eadce6c907bdaed7cd6f01815404 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 11 Jul 2020 09:10:30 +0800 Subject: drm: sun4i: hdmi: Fix inverted HPD result When the extra HPD polling in sun4i_hdmi was removed, the result of HPD was accidentally inverted. Fix this by inverting the check. Fixes: bda8eaa6dee7 ("drm: sun4i: hdmi: Remove extra HPD polling") Signed-off-by: Chen-Yu Tsai Tested-by: Mans Rullgard Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20200711011030.21997-1-wens@kernel.org --- drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c index 557cbe5ab35f..2f2c9f0a1071 100644 --- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c @@ -260,7 +260,7 @@ sun4i_hdmi_connector_detect(struct drm_connector *connector, bool force) unsigned long reg; reg = readl(hdmi->base + SUN4I_HDMI_HPD_REG); - if (reg & SUN4I_HDMI_HPD_HIGH) { + if (!(reg & SUN4I_HDMI_HPD_HIGH)) { cec_phys_addr_invalidate(hdmi->cec_adap); return connector_status_disconnected; } -- cgit v1.2.3 From a2db71b9123492e67210985867b332db09eec0cf Mon Sep 17 00:00:00 2001 From: Ravi Bangoria Date: Fri, 19 Jun 2020 19:04:11 +0530 Subject: libsubcmd: Fix OPT_CALLBACK_SET() Any option macro with _SET suffix should set opt->set variable which is not happening for OPT_CALLBACK_SET(). This is causing issues with perf record --switch-output-event. Fix that. Before: # ./perf record --overwrite -e sched:*switch,syscalls:sys_enter_mmap \ --switch-output-event syscalls:sys_enter_mmap ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.297 MB perf.data (657 samples) ] After: $ ./perf record --overwrite -e sched:*switch,syscalls:sys_enter_mmap \ --switch-output-event syscalls:sys_enter_mmap [ perf record: dump data: Woken up 1 times ] [ perf record: Dump perf.data.2020061918144542 ] [ perf record: dump data: Woken up 1 times ] [ perf record: Dump perf.data.2020061918144608 ] [ perf record: dump data: Woken up 1 times ] [ perf record: Dump perf.data.2020061918144660 ] ^C[ perf record: dump data: Woken up 1 times ] [ perf record: Dump perf.data.2020061918144784 ] [ perf record: Woken up 0 times to write data ] [ perf record: Dump perf.data.2020061918144803 ] [ perf record: Captured and wrote 0.419 MB perf.data. ] Fixes: 636eb4d001b1 ("libsubcmd: Introduce OPT_CALLBACK_SET()") Signed-off-by: Ravi Bangoria Tested-by: Arnaldo Carvalho de Melo Cc: Jiri Olsa Link: http://lore.kernel.org/lkml/20200619133412.50705-1-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/subcmd/parse-options.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/lib/subcmd/parse-options.c b/tools/lib/subcmd/parse-options.c index dbb9efbf718a..39ebf6192016 100644 --- a/tools/lib/subcmd/parse-options.c +++ b/tools/lib/subcmd/parse-options.c @@ -237,6 +237,9 @@ static int get_value(struct parse_opt_ctx_t *p, return err; case OPTION_CALLBACK: + if (opt->set) + *(bool *)opt->set = true; + if (unset) return (*opt->callback)(opt, NULL, 1) ? (-1) : 0; if (opt->flags & PARSE_OPT_NOARG) -- cgit v1.2.3 From 94fddb7ad019ad9f14d33cd0a6cd159a52a082b8 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 17 Jul 2020 09:35:18 -0300 Subject: perf tools: Sync hashmap.h with libbpf's To pick up the changes in: b2f9f1535bb9 ("libbpf: Fix libbpf hashmap on (I)LP32 architectures") Silencing this warning: Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h' diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h I'll eventually update the warning to remove the "Kernel ABI" part and instead state libbpf when noticing that the original is at "tools/lib/something". Cc: Adrian Hunter Cc: Alexei Starovoitov Cc: Andrii Nakryiko Cc: Jakub Bogusz Cc: Jiri Olsa Cc: Namhyung Kim Ian Rogers Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/hashmap.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/tools/perf/util/hashmap.h b/tools/perf/util/hashmap.h index df59fd4fc95b..e0af36b0e5d8 100644 --- a/tools/perf/util/hashmap.h +++ b/tools/perf/util/hashmap.h @@ -11,14 +11,18 @@ #include #include #include -#ifndef __WORDSIZE -#define __WORDSIZE (__SIZEOF_LONG__ * 8) -#endif static inline size_t hash_bits(size_t h, int bits) { /* shuffle bits and return requested number of upper bits */ - return (h * 11400714819323198485llu) >> (__WORDSIZE - bits); +#if (__SIZEOF_SIZE_T__ == __SIZEOF_LONG_LONG__) + /* LP64 case */ + return (h * 11400714819323198485llu) >> (__SIZEOF_LONG_LONG__ * 8 - bits); +#elif (__SIZEOF_SIZE_T__ <= __SIZEOF_LONG__) + return (h * 2654435769lu) >> (__SIZEOF_LONG__ * 8 - bits); +#else +# error "Unsupported size_t size" +#endif } typedef size_t (*hashmap_hash_fn)(const void *key, void *ctx); -- cgit v1.2.3 From 25d4e7f513d4f8afcf81cb6f00edf1248b0ff8fc Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 17 Jul 2020 09:39:16 -0300 Subject: tools arch kvm: Sync kvm headers with the kernel sources To pick up the changes from: 83d31e5271ac ("KVM: nVMX: fixes for preemption timer migration") That don't entail changes in tooling. This silences these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Cc: Paolo Bonzini Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/x86/include/uapi/asm/kvm.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/arch/x86/include/uapi/asm/kvm.h b/tools/arch/x86/include/uapi/asm/kvm.h index 17c5a038f42d..0780f97c1850 100644 --- a/tools/arch/x86/include/uapi/asm/kvm.h +++ b/tools/arch/x86/include/uapi/asm/kvm.h @@ -408,14 +408,15 @@ struct kvm_vmx_nested_state_data { }; struct kvm_vmx_nested_state_hdr { - __u32 flags; __u64 vmxon_pa; __u64 vmcs12_pa; - __u64 preemption_timer_deadline; struct { __u16 flags; } smm; + + __u32 flags; + __u64 preemption_timer_deadline; }; struct kvm_svm_nested_state_data { -- cgit v1.2.3 From c2942c4363ceb8bbce12c2db8f42d8bbbf5bb0ef Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 13 Jun 2020 08:46:25 +0200 Subject: media: atomisp: fix the handling of clock number Right now, the driver is not doing the right thing to detect the clock like used by the sensor, at least on devices without the gmin's EFI vars. Add some notes at the code to explain why and skip the wrong value provided by the _DSM table. Signed-off-by: Mauro Carvalho Chehab --- .../media/atomisp/pci/atomisp_gmin_platform.c | 49 ++++++++++++++++++---- 1 file changed, 42 insertions(+), 7 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index 1af9da8acf4c..cb360b8399e5 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -26,6 +26,9 @@ enum clock_rate { #define CLK_RATE_19_2MHZ 19200000 #define CLK_RATE_25_0MHZ 25000000 +/* Valid clock number range from 0 to 5 */ +#define MAX_CLK_COUNT 5 + /* X-Powers AXP288 register set */ #define ALDO1_SEL_REG 0x28 #define ALDO1_CTRL3_REG 0x13 @@ -61,7 +64,6 @@ enum clock_rate { struct gmin_subdev { struct v4l2_subdev *subdev; - int clock_num; enum clock_rate clock_src; bool clock_on; struct clk *pmc_clk; @@ -447,7 +449,7 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) struct acpi_device *adev; acpi_handle handle; struct device *dev; - int i, ret; + int i, ret, clock_num; if (!client) return NULL; @@ -492,17 +494,37 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) } gmin_subdevs[i].subdev = subdev; - gmin_subdevs[i].clock_num = gmin_get_var_int(dev, false, "CamClk", 0); + /*WA:CHT requires XTAL clock as PLL is not stable.*/ gmin_subdevs[i].clock_src = gmin_get_var_int(dev, false, "ClkSrc", VLV2_CLK_PLL_19P2MHZ); gmin_subdevs[i].csi_port = gmin_get_var_int(dev, false, "CsiPort", 0); gmin_subdevs[i].csi_lanes = gmin_get_var_int(dev, false, "CsiLanes", 1); - /* get PMC clock with clock framework */ - snprintf(gmin_pmc_clk_name, - sizeof(gmin_pmc_clk_name), - "%s_%d", "pmc_plt_clk", gmin_subdevs[i].clock_num); + /* + * FIXME: + * + * According with : + * https://github.com/projectceladon/hardware-intel-kernelflinger/blob/master/doc/fastboot.md + * + * The "CamClk" EFI var is set via fastboot on some Android devices, + * and seems to contain the number of the clock used to feed the + * sensor. + * + * On systems with a proper ACPI table, this is given via the _PR0 + * power resource table. The logic below should first check if there + * is a power resource already, falling back to the EFI vars detection + * otherwise. + */ + clock_num = gmin_get_var_int(dev, false, "CamClk", -1); + + if (clock_num < 0 || clock_num > MAX_CLK_COUNT) { + dev_err(dev, "Invalid clock number\n"); + return NULL; + } + + snprintf(gmin_pmc_clk_name, sizeof(gmin_pmc_clk_name), + "%s_%d", "pmc_plt_clk", clock_num); gmin_subdevs[i].pmc_clk = devm_clk_get(dev, gmin_pmc_clk_name); if (IS_ERR(gmin_subdevs[i].pmc_clk)) { @@ -515,6 +537,7 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) return NULL; } + dev_info(dev, "Will use CLK%d (%s)\n", clock_num, gmin_pmc_clk_name); /* * The firmware might enable the clock at @@ -957,6 +980,18 @@ static int gmin_get_config_dsm_var(struct device *dev, union acpi_object *obj, *cur = NULL; int i; + /* + * The data reported by "CamClk" seems to be either 0 or 1 at the + * _DSM table. + * + * At the ACPI tables we looked so far, this is not related to the + * actual clock source for the sensor, which is given by the + * _PR0 ACPI table. So, ignore it, as otherwise this will be + * set to a wrong value. + */ + if (!strcmp(var, "CamClk")) + return -EINVAL; + obj = acpi_evaluate_dsm(handle, &atomisp_dsm_guid, 0, 0, NULL); if (!obj) { dev_info_once(dev, "Didn't find ACPI _DSM table.\n"); -- cgit v1.2.3 From b872d0640840018669032b20b6375a478ed1f923 Mon Sep 17 00:00:00 2001 From: Zeng Tao Date: Wed, 15 Jul 2020 15:34:41 +0800 Subject: vfio/pci: fix racy on error and request eventfd ctx The vfio_pci_release call will free and clear the error and request eventfd ctx while these ctx could be in use at the same time in the function like vfio_pci_request, and it's expected to protect them under the vdev->igate mutex, which is missing in vfio_pci_release. This issue is introduced since commit 1518ac272e78 ("vfio/pci: fix memory leaks of eventfd ctx"),and since commit 5c5866c593bb ("vfio/pci: Clear error and request eventfd ctx after releasing"), it's very easily to trigger the kernel panic like this: [ 9513.904346] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 9513.913091] Mem abort info: [ 9513.915871] ESR = 0x96000006 [ 9513.918912] EC = 0x25: DABT (current EL), IL = 32 bits [ 9513.924198] SET = 0, FnV = 0 [ 9513.927238] EA = 0, S1PTW = 0 [ 9513.930364] Data abort info: [ 9513.933231] ISV = 0, ISS = 0x00000006 [ 9513.937048] CM = 0, WnR = 0 [ 9513.940003] user pgtable: 4k pages, 48-bit VAs, pgdp=0000007ec7d12000 [ 9513.946414] [0000000000000008] pgd=0000007ec7d13003, p4d=0000007ec7d13003, pud=0000007ec728c003, pmd=0000000000000000 [ 9513.956975] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 9513.962521] Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio hclge hns3 hnae3 [last unloaded: vfio_pci] [ 9513.972998] CPU: 4 PID: 1327 Comm: bash Tainted: G W 5.8.0-rc4+ #3 [ 9513.980443] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B270.01 05/08/2020 [ 9513.989274] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--) [ 9513.994827] pc : _raw_spin_lock_irqsave+0x48/0x88 [ 9513.999515] lr : eventfd_signal+0x6c/0x1b0 [ 9514.003591] sp : ffff800038a0b960 [ 9514.006889] x29: ffff800038a0b960 x28: ffff007ef7f4da10 [ 9514.012175] x27: ffff207eefbbfc80 x26: ffffbb7903457000 [ 9514.017462] x25: ffffbb7912191000 x24: ffff007ef7f4d400 [ 9514.022747] x23: ffff20be6e0e4c00 x22: 0000000000000008 [ 9514.028033] x21: 0000000000000000 x20: 0000000000000000 [ 9514.033321] x19: 0000000000000008 x18: 0000000000000000 [ 9514.038606] x17: 0000000000000000 x16: ffffbb7910029328 [ 9514.043893] x15: 0000000000000000 x14: 0000000000000001 [ 9514.049179] x13: 0000000000000000 x12: 0000000000000002 [ 9514.054466] x11: 0000000000000000 x10: 0000000000000a00 [ 9514.059752] x9 : ffff800038a0b840 x8 : ffff007ef7f4de60 [ 9514.065038] x7 : ffff007fffc96690 x6 : fffffe01faffb748 [ 9514.070324] x5 : 0000000000000000 x4 : 0000000000000000 [ 9514.075609] x3 : 0000000000000000 x2 : 0000000000000001 [ 9514.080895] x1 : ffff007ef7f4d400 x0 : 0000000000000000 [ 9514.086181] Call trace: [ 9514.088618] _raw_spin_lock_irqsave+0x48/0x88 [ 9514.092954] eventfd_signal+0x6c/0x1b0 [ 9514.096691] vfio_pci_request+0x84/0xd0 [vfio_pci] [ 9514.101464] vfio_del_group_dev+0x150/0x290 [vfio] [ 9514.106234] vfio_pci_remove+0x30/0x128 [vfio_pci] [ 9514.111007] pci_device_remove+0x48/0x108 [ 9514.115001] device_release_driver_internal+0x100/0x1b8 [ 9514.120200] device_release_driver+0x28/0x38 [ 9514.124452] pci_stop_bus_device+0x68/0xa8 [ 9514.128528] pci_stop_and_remove_bus_device+0x20/0x38 [ 9514.133557] pci_iov_remove_virtfn+0xb4/0x128 [ 9514.137893] sriov_disable+0x3c/0x108 [ 9514.141538] pci_disable_sriov+0x28/0x38 [ 9514.145445] hns3_pci_sriov_configure+0x48/0xb8 [hns3] [ 9514.150558] sriov_numvfs_store+0x110/0x198 [ 9514.154724] dev_attr_store+0x44/0x60 [ 9514.158373] sysfs_kf_write+0x5c/0x78 [ 9514.162018] kernfs_fop_write+0x104/0x210 [ 9514.166010] __vfs_write+0x48/0x90 [ 9514.169395] vfs_write+0xbc/0x1c0 [ 9514.172694] ksys_write+0x74/0x100 [ 9514.176079] __arm64_sys_write+0x24/0x30 [ 9514.179987] el0_svc_common.constprop.4+0x110/0x200 [ 9514.184842] do_el0_svc+0x34/0x98 [ 9514.188144] el0_svc+0x14/0x40 [ 9514.191185] el0_sync_handler+0xb0/0x2d0 [ 9514.195088] el0_sync+0x140/0x180 [ 9514.198389] Code: b9001020 d2800000 52800022 f9800271 (885ffe61) [ 9514.204455] ---[ end trace 648de00c8406465f ]--- [ 9514.212308] note: bash[1327] exited with preempt_count 1 Cc: Qian Cai Cc: Alex Williamson Fixes: 1518ac272e78 ("vfio/pci: fix memory leaks of eventfd ctx") Signed-off-by: Zeng Tao Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index f634c81998bb..de881a6cff35 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -521,14 +521,19 @@ static void vfio_pci_release(void *device_data) vfio_pci_vf_token_user_add(vdev, -1); vfio_spapr_pci_eeh_release(vdev->pdev); vfio_pci_disable(vdev); + mutex_lock(&vdev->igate); if (vdev->err_trigger) { eventfd_ctx_put(vdev->err_trigger); vdev->err_trigger = NULL; } + mutex_unlock(&vdev->igate); + + mutex_lock(&vdev->igate); if (vdev->req_trigger) { eventfd_ctx_put(vdev->req_trigger); vdev->req_trigger = NULL; } + mutex_unlock(&vdev->igate); } mutex_unlock(&vdev->reflck->lock); -- cgit v1.2.3 From 38b7c2a3ffb1fce8358ddc6006cfe5c038ff9963 Mon Sep 17 00:00:00 2001 From: Palmer Dabbelt Date: Thu, 16 Jul 2020 11:57:26 -0700 Subject: RISC-V: Upgrade smp_mb__after_spinlock() to iorw,iorw While digging through the recent mmiowb preemption issue it came up that we aren't actually preventing IO from crossing a scheduling boundary. While it's a bit ugly to overload smp_mb__after_spinlock() with this behavior, it's what PowerPC is doing so there's some precedent. Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/barrier.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/riscv/include/asm/barrier.h b/arch/riscv/include/asm/barrier.h index 3f1737f301cc..d0e24aaa2aa0 100644 --- a/arch/riscv/include/asm/barrier.h +++ b/arch/riscv/include/asm/barrier.h @@ -58,8 +58,16 @@ do { \ * The AQ/RL pair provides a RCpc critical section, but there's not really any * way we can take advantage of that here because the ordering is only enforced * on that one lock. Thus, we're just doing a full fence. + * + * Since we allow writeX to be called from preemptive regions we need at least + * an "o" in the predecessor set to ensure device writes are visible before the + * task is marked as available for scheduling on a new hart. While I don't see + * any concrete reason we need a full IO fence, it seems safer to just upgrade + * this in order to avoid any IO crossing a scheduling boundary. In both + * instances the scheduler pairs this with an mb(), so nothing is necessary on + * the new hart. */ -#define smp_mb__after_spinlock() RISCV_FENCE(rw,rw) +#define smp_mb__after_spinlock() RISCV_FENCE(iorw,iorw) #include -- cgit v1.2.3 From 56a1c778c7663a3068a59b4cb8c8fd27506b3eca Mon Sep 17 00:00:00 2001 From: Min Li Date: Tue, 14 Jul 2020 13:15:20 -0400 Subject: docs: ptp.rst: add support for Renesas (IDT) ClockMatrix MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add below to “Ancillary clock features” section - Low Pass Filter (LPF) access from user space Add below to list of “Supported hardware” section + Renesas (IDT) ClockMatrix™ Signed-off-by: Min Li Signed-off-by: David S. Miller --- Documentation/driver-api/ptp.rst | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/driver-api/ptp.rst b/Documentation/driver-api/ptp.rst index a15192e32347..664838ae7776 100644 --- a/Documentation/driver-api/ptp.rst +++ b/Documentation/driver-api/ptp.rst @@ -23,6 +23,7 @@ PTP hardware clock infrastructure for Linux + Ancillary clock features - Time stamp external events - Period output signals configurable from user space + - Low Pass Filter (LPF) access from user space - Synchronization of the Linux system time via the PPS subsystem PTP hardware clock kernel API @@ -94,3 +95,14 @@ Supported hardware - Auxiliary Slave/Master Mode Snapshot (optional interrupt) - Target Time (optional interrupt) + + * Renesas (IDT) ClockMatrix™ + + - Up to 4 independent PHC channels + - Integrated low pass filter (LPF), access via .adjPhase (compliant to ITU-T G.8273.2) + - Programmable output periodic signals + - Programmable inputs can time stamp external triggers + - Driver and/or hardware configuration through firmware (idtcm.bin) + - LPF settings (bandwidth, phase limiting, automatic holdover, physical layer assist (per ITU-T G.8273.2)) + - Programmable output PTP clocks, any frequency up to 1GHz (to other PHY/MAC time stampers, refclk to ASSPs/SoCs/FPGAs) + - Lock to GNSS input, automatic switching between GNSS and user-space PHC control (optional) -- cgit v1.2.3 From 65caafd0d2145d1dd02072c4ced540624daeab40 Mon Sep 17 00:00:00 2001 From: Olga Kornievskaia Date: Wed, 15 Jul 2020 13:04:15 -0400 Subject: SUNRPC reverting d03727b248d0 ("NFSv4 fix CLOSE not waiting for direct IO compeletion") Reverting commit d03727b248d0 "NFSv4 fix CLOSE not waiting for direct IO compeletion". This patch made it so that fput() by calling inode_dio_done() in nfs_file_release() would wait uninterruptably for any outstanding directIO to the file (but that wait on IO should be killable). The problem the patch was also trying to address was REMOVE returning ERR_ACCESS because the file is still opened, is supposed to be resolved by server returning ERR_FILE_OPEN and not ERR_ACCESS. Signed-off-by: Olga Kornievskaia Signed-off-by: Anna Schumaker --- fs/nfs/direct.c | 13 ++++--------- fs/nfs/file.c | 1 - 2 files changed, 4 insertions(+), 10 deletions(-) diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 3d113cf8908a..1b79dd5cf661 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -267,6 +267,8 @@ static void nfs_direct_complete(struct nfs_direct_req *dreq) { struct inode *inode = dreq->inode; + inode_dio_end(inode); + if (dreq->iocb) { long res = (long) dreq->error; if (dreq->count != 0) { @@ -278,10 +280,7 @@ static void nfs_direct_complete(struct nfs_direct_req *dreq) complete(&dreq->completion); - igrab(inode); nfs_direct_req_release(dreq); - inode_dio_end(inode); - iput(inode); } static void nfs_direct_read_completion(struct nfs_pgio_header *hdr) @@ -411,10 +410,8 @@ static ssize_t nfs_direct_read_schedule_iovec(struct nfs_direct_req *dreq, * generic layer handle the completion. */ if (requested_bytes == 0) { - igrab(inode); - nfs_direct_req_release(dreq); inode_dio_end(inode); - iput(inode); + nfs_direct_req_release(dreq); return result < 0 ? result : -EIO; } @@ -867,10 +864,8 @@ static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq, * generic layer handle the completion. */ if (requested_bytes == 0) { - igrab(inode); - nfs_direct_req_release(dreq); inode_dio_end(inode); - iput(inode); + nfs_direct_req_release(dreq); return result < 0 ? result : -EIO; } diff --git a/fs/nfs/file.c b/fs/nfs/file.c index ccd6c1637b27..f96367a2463e 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -83,7 +83,6 @@ nfs_file_release(struct inode *inode, struct file *filp) dprintk("NFS: release(%pD2)\n", filp); nfs_inc_stats(inode, NFSIOS_VFSRELEASE); - inode_dio_wait(inode); nfs_file_clear_open_context(filp); return 0; } -- cgit v1.2.3 From cebb69754f37d68e1355a5e726fdac317bcda302 Mon Sep 17 00:00:00 2001 From: Weilong Chen Date: Wed, 15 Jul 2020 20:58:10 +0800 Subject: rtnetlink: Fix memory(net_device) leak when ->newlink fails When vlan_newlink call register_vlan_dev fails, it might return error with dev->reg_state = NETREG_UNREGISTERED. The rtnl_newlink should free the memory. But currently rtnl_newlink only free the memory which state is NETREG_UNINITIALIZED. BUG: memory leak unreferenced object 0xffff8881051de000 (size 4096): comm "syz-executor139", pid 560, jiffies 4294745346 (age 32.445s) hex dump (first 32 bytes): 76 6c 61 6e 32 00 00 00 00 00 00 00 00 00 00 00 vlan2........... 00 45 28 03 81 88 ff ff 00 00 00 00 00 00 00 00 .E(............. backtrace: [<0000000047527e31>] kmalloc_node include/linux/slab.h:578 [inline] [<0000000047527e31>] kvmalloc_node+0x33/0xd0 mm/util.c:574 [<000000002b59e3bc>] kvmalloc include/linux/mm.h:753 [inline] [<000000002b59e3bc>] kvzalloc include/linux/mm.h:761 [inline] [<000000002b59e3bc>] alloc_netdev_mqs+0x83/0xd90 net/core/dev.c:9929 [<000000006076752a>] rtnl_create_link+0x2c0/0xa20 net/core/rtnetlink.c:3067 [<00000000572b3be5>] __rtnl_newlink+0xc9c/0x1330 net/core/rtnetlink.c:3329 [<00000000e84ea553>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3397 [<0000000052c7c0a9>] rtnetlink_rcv_msg+0x540/0x990 net/core/rtnetlink.c:5460 [<000000004b5cb379>] netlink_rcv_skb+0x12b/0x3a0 net/netlink/af_netlink.c:2469 [<00000000c71c20d3>] netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] [<00000000c71c20d3>] netlink_unicast+0x4c6/0x690 net/netlink/af_netlink.c:1329 [<00000000cca72fa9>] netlink_sendmsg+0x735/0xcc0 net/netlink/af_netlink.c:1918 [<000000009221ebf7>] sock_sendmsg_nosec net/socket.c:652 [inline] [<000000009221ebf7>] sock_sendmsg+0x109/0x140 net/socket.c:672 [<000000001c30ffe4>] ____sys_sendmsg+0x5f5/0x780 net/socket.c:2352 [<00000000b71ca6f3>] ___sys_sendmsg+0x11d/0x1a0 net/socket.c:2406 [<0000000007297384>] __sys_sendmsg+0xeb/0x1b0 net/socket.c:2439 [<000000000eb29b11>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<000000006839b4d0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: cb626bf566eb ("net-sysfs: Fix reference count leak") Reported-by: Hulk Robot Signed-off-by: Weilong Chen Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 9aedc15736ad..85a4b0101f76 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -3343,7 +3343,8 @@ replay: */ if (err < 0) { /* If device is not registered at all, free it now */ - if (dev->reg_state == NETREG_UNINITIALIZED) + if (dev->reg_state == NETREG_UNINITIALIZED || + dev->reg_state == NETREG_UNREGISTERED) free_netdev(dev); goto out; } -- cgit v1.2.3 From e2a71bdea81690b6ef11f4368261ec6f5b6891aa Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 17 Jul 2020 16:05:40 +0200 Subject: timer: Fix wheel index calculation on last level When an expiration delta falls into the last level of the wheel, that delta has be compared against the maximum possible delay and reduced to fit in if necessary. However instead of comparing the delta against the maximum, the code compares the actual expiry against the maximum. Then instead of fixing the delta to fit in, it sets the maximum delta as the expiry value. This can result in various undesired outcomes, the worst possible one being a timer expiring 15 days ahead to fire immediately. Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel") Signed-off-by: Frederic Weisbecker Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200717140551.29076-2-frederic@kernel.org --- kernel/time/timer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/time/timer.c b/kernel/time/timer.c index 9a838d38dbe6..df1ff803acc4 100644 --- a/kernel/time/timer.c +++ b/kernel/time/timer.c @@ -521,8 +521,8 @@ static int calc_wheel_index(unsigned long expires, unsigned long clk) * Force expire obscene large timeouts to expire at the * capacity limit of the wheel. */ - if (expires >= WHEEL_TIMEOUT_CUTOFF) - expires = WHEEL_TIMEOUT_MAX; + if (delta >= WHEEL_TIMEOUT_CUTOFF) + expires = clk + WHEEL_TIMEOUT_MAX; idx = calc_index(expires, LVL_DEPTH - 1); } -- cgit v1.2.3 From bca9749b1aa23d964d3ab930938af66dbf887f15 Mon Sep 17 00:00:00 2001 From: Wang Hai Date: Thu, 16 Jul 2020 11:50:38 +0800 Subject: net: smc91x: Fix possible memory leak in smc_drv_probe() If try_toggle_control_gpio() failed in smc_drv_probe(), free_netdev(ndev) should be called to free the ndev created earlier. Otherwise, a memleak will occur. Fixes: 7d2911c43815 ("net: smc91x: Fix gpios for device tree based booting") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 90410f9d3b1a..1c4fea9c3ec4 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -2274,7 +2274,7 @@ static int smc_drv_probe(struct platform_device *pdev) ret = try_toggle_control_gpio(&pdev->dev, &lp->power_gpio, "power", 0, 0, 100); if (ret) - return ret; + goto out_free_netdev; /* * Optional reset GPIO configured? Minimum 100 ns reset needed @@ -2283,7 +2283,7 @@ static int smc_drv_probe(struct platform_device *pdev) ret = try_toggle_control_gpio(&pdev->dev, &lp->reset_gpio, "reset", 0, 0, 100); if (ret) - return ret; + goto out_free_netdev; /* * Need to wait for optional EEPROM to load, max 750 us according -- cgit v1.2.3 From aba69d49fb49c9166596dd78926514173b7f9ab5 Mon Sep 17 00:00:00 2001 From: Paolo Pisati Date: Thu, 16 Jul 2020 17:51:14 +0200 Subject: selftests: net: ip_defrag: modprobe missing nf_defrag_ipv6 support Fix ip_defrag.sh when CONFIG_NF_DEFRAG_IPV6=m: $ sudo ./ip_defrag.sh + set -e + mktemp -u XXXXXX + readonly NETNS=ns-rGlXcw + trap cleanup EXIT + setup + ip netns add ns-rGlXcw + ip -netns ns-rGlXcw link set lo up + ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_high_thresh=9000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_low_thresh=7000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_time=1 + ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_high_thresh=9000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_low_thresh=7000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_time=1 + ip netns exec ns-rGlXcw sysctl -w net.netfilter.nf_conntrack_frag6_high_thresh=9000000 + cleanup + ip netns del ns-rGlXcw $ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh ls: cannot access '/proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh': No such file or directory $ sudo modprobe nf_defrag_ipv6 $ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh -rw-r--r-- 1 root root 0 Jul 14 12:34 /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh Signed-off-by: Paolo Pisati Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller --- tools/testing/selftests/net/ip_defrag.sh | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/net/ip_defrag.sh b/tools/testing/selftests/net/ip_defrag.sh index 15d3489ecd9c..ceb7ad4dbd94 100755 --- a/tools/testing/selftests/net/ip_defrag.sh +++ b/tools/testing/selftests/net/ip_defrag.sh @@ -6,6 +6,8 @@ set +x set -e +modprobe -q nf_defrag_ipv6 + readonly NETNS="ns-$(mktemp -u XXXXXX)" setup() { -- cgit v1.2.3 From 2f11f0df8474b2206c8cf2d5d5b98e7eff240cdf Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Thu, 16 Jul 2020 16:38:15 -0700 Subject: net: bcmgenet: test MPD_EN when resuming When the GENET driver resumes from deep sleep the UMAC_CMD register may not be accessible and therefore should not be accessed from bcmgenet_wol_power_up_cfg() if the GENET has been reset. This commit adds a check of the MPD_EN flag when Wake on Magic Packet is enabled. A clear flag indicates that the GENET hardware must have been reset so the remainder of the hardware programming is bypassed. Fixes: 1a1d5106c1e3 ("net: bcmgenet: move clk_wol management to bcmgenet_wol") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c index 4ea6a26b04f7..def990dbf34f 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c @@ -217,11 +217,16 @@ void bcmgenet_wol_power_up_cfg(struct bcmgenet_priv *priv, priv->wol_active = 0; clk_disable_unprepare(priv->clk_wol); + priv->crc_fwd_en = 0; /* Disable Magic Packet Detection */ - reg = bcmgenet_umac_readl(priv, UMAC_MPD_CTRL); - reg &= ~(MPD_EN | MPD_PW_EN); - bcmgenet_umac_writel(priv, reg, UMAC_MPD_CTRL); + if (priv->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) { + reg = bcmgenet_umac_readl(priv, UMAC_MPD_CTRL); + if (!(reg & MPD_EN)) + return; /* already reset so skip the rest */ + reg &= ~(MPD_EN | MPD_PW_EN); + bcmgenet_umac_writel(priv, reg, UMAC_MPD_CTRL); + } /* Disable WAKE_FILTER Detection */ reg = bcmgenet_hfb_reg_readl(priv, HFB_CTRL); @@ -232,5 +237,4 @@ void bcmgenet_wol_power_up_cfg(struct bcmgenet_priv *priv, reg = bcmgenet_umac_readl(priv, UMAC_CMD); reg &= ~CMD_CRC_FWD; bcmgenet_umac_writel(priv, reg, UMAC_CMD); - priv->crc_fwd_en = 0; } -- cgit v1.2.3 From 3d653adb4b4955addad8c3accd33e22cb99a445b Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Thu, 16 Jul 2020 16:38:16 -0700 Subject: net: bcmgenet: test RBUF_ACPI_EN when resuming When the GENET driver resumes from deep sleep the UMAC_CMD register may not be accessible and therefore should not be accessed from bcmgenet_wol_power_up_cfg() if the GENET has been reset. This commit adds a check of the RBUF_ACPI_EN flag when Wake on Filter is enabled. A clear flag indicates that the GENET hardware must have been reset so the remainder of the hardware programming is bypassed. Fixes: f50932cca632 ("net: bcmgenet: add WAKE_FILTER support") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c index def990dbf34f..1c86eddb1b51 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c @@ -229,9 +229,13 @@ void bcmgenet_wol_power_up_cfg(struct bcmgenet_priv *priv, } /* Disable WAKE_FILTER Detection */ - reg = bcmgenet_hfb_reg_readl(priv, HFB_CTRL); - reg &= ~(RBUF_HFB_EN | RBUF_ACPI_EN); - bcmgenet_hfb_reg_writel(priv, reg, HFB_CTRL); + if (priv->wolopts & WAKE_FILTER) { + reg = bcmgenet_hfb_reg_readl(priv, HFB_CTRL); + if (!(reg & RBUF_ACPI_EN)) + return; /* already reset so skip the rest */ + reg &= ~(RBUF_HFB_EN | RBUF_ACPI_EN); + bcmgenet_hfb_reg_writel(priv, reg, HFB_CTRL); + } /* Disable CRC Forward */ reg = bcmgenet_umac_readl(priv, UMAC_CMD); -- cgit v1.2.3 From a8c64542b478e61fa17661803b590ed276205914 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Thu, 16 Jul 2020 16:38:17 -0700 Subject: net: bcmgenet: restore HFB filters on resume The Hardware Filter Block RAM may not be preserved when the GENET block is reset during a deep sleep, so it is not sufficient to only backup and restore the enables. This commit clears out the HFB block and reprograms the rxnfc rules when the system resumes from a suspended state. To support this the bcmgenet_hfb_create_rxnfc_filter() function is modified to access the register space directly so that it can't fail due to memory allocation issues. Fixes: f50932cca632 ("net: bcmgenet: add WAKE_FILTER support") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 138 +++++++++++-------------- drivers/net/ethernet/broadcom/genet/bcmgenet.h | 1 - 2 files changed, 62 insertions(+), 77 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index af924a8b885f..368e05b16ae9 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -543,14 +543,14 @@ static int bcmgenet_hfb_validate_mask(void *mask, size_t size) #define VALIDATE_MASK(x) \ bcmgenet_hfb_validate_mask(&(x), sizeof(x)) -static int bcmgenet_hfb_insert_data(u32 *f, int offset, - void *val, void *mask, size_t size) +static int bcmgenet_hfb_insert_data(struct bcmgenet_priv *priv, u32 f_index, + u32 offset, void *val, void *mask, + size_t size) { - int index; - u32 tmp; + u32 index, tmp; - index = offset / 2; - tmp = f[index]; + index = f_index * priv->hw_params->hfb_filter_size + offset / 2; + tmp = bcmgenet_hfb_readl(priv, index * sizeof(u32)); while (size--) { if (offset++ & 1) { @@ -567,9 +567,10 @@ static int bcmgenet_hfb_insert_data(u32 *f, int offset, tmp |= 0x10000; break; } - f[index++] = tmp; + bcmgenet_hfb_writel(priv, tmp, index++ * sizeof(u32)); if (size) - tmp = f[index]; + tmp = bcmgenet_hfb_readl(priv, + index * sizeof(u32)); } else { tmp &= ~0xCFF00; tmp |= (*(unsigned char *)val++) << 8; @@ -585,44 +586,26 @@ static int bcmgenet_hfb_insert_data(u32 *f, int offset, break; } if (!size) - f[index] = tmp; + bcmgenet_hfb_writel(priv, tmp, index * sizeof(u32)); } } return 0; } -static void bcmgenet_hfb_set_filter(struct bcmgenet_priv *priv, u32 *f_data, - u32 f_length, u32 rx_queue, int f_index) -{ - u32 base = f_index * priv->hw_params->hfb_filter_size; - int i; - - for (i = 0; i < f_length; i++) - bcmgenet_hfb_writel(priv, f_data[i], (base + i) * sizeof(u32)); - - bcmgenet_hfb_set_filter_length(priv, f_index, 2 * f_length); - bcmgenet_hfb_set_filter_rx_queue_mapping(priv, f_index, rx_queue); -} - -static int bcmgenet_hfb_create_rxnfc_filter(struct bcmgenet_priv *priv, - struct bcmgenet_rxnfc_rule *rule) +static void bcmgenet_hfb_create_rxnfc_filter(struct bcmgenet_priv *priv, + struct bcmgenet_rxnfc_rule *rule) { struct ethtool_rx_flow_spec *fs = &rule->fs; - int err = 0, offset = 0, f_length = 0; + u32 offset = 0, f_length = 0, f; u8 val_8, mask_8; __be16 val_16; u16 mask_16; size_t size; - u32 *f_data; - - f_data = kcalloc(priv->hw_params->hfb_filter_size, sizeof(u32), - GFP_KERNEL); - if (!f_data) - return -ENOMEM; + f = fs->location; if (fs->flow_type & FLOW_MAC_EXT) { - bcmgenet_hfb_insert_data(f_data, 0, + bcmgenet_hfb_insert_data(priv, f, 0, &fs->h_ext.h_dest, &fs->m_ext.h_dest, sizeof(fs->h_ext.h_dest)); } @@ -630,11 +613,11 @@ static int bcmgenet_hfb_create_rxnfc_filter(struct bcmgenet_priv *priv, if (fs->flow_type & FLOW_EXT) { if (fs->m_ext.vlan_etype || fs->m_ext.vlan_tci) { - bcmgenet_hfb_insert_data(f_data, 12, + bcmgenet_hfb_insert_data(priv, f, 12, &fs->h_ext.vlan_etype, &fs->m_ext.vlan_etype, sizeof(fs->h_ext.vlan_etype)); - bcmgenet_hfb_insert_data(f_data, 14, + bcmgenet_hfb_insert_data(priv, f, 14, &fs->h_ext.vlan_tci, &fs->m_ext.vlan_tci, sizeof(fs->h_ext.vlan_tci)); @@ -646,15 +629,15 @@ static int bcmgenet_hfb_create_rxnfc_filter(struct bcmgenet_priv *priv, switch (fs->flow_type & ~(FLOW_EXT | FLOW_MAC_EXT)) { case ETHER_FLOW: f_length += DIV_ROUND_UP(ETH_HLEN, 2); - bcmgenet_hfb_insert_data(f_data, 0, + bcmgenet_hfb_insert_data(priv, f, 0, &fs->h_u.ether_spec.h_dest, &fs->m_u.ether_spec.h_dest, sizeof(fs->h_u.ether_spec.h_dest)); - bcmgenet_hfb_insert_data(f_data, ETH_ALEN, + bcmgenet_hfb_insert_data(priv, f, ETH_ALEN, &fs->h_u.ether_spec.h_source, &fs->m_u.ether_spec.h_source, sizeof(fs->h_u.ether_spec.h_source)); - bcmgenet_hfb_insert_data(f_data, (2 * ETH_ALEN) + offset, + bcmgenet_hfb_insert_data(priv, f, (2 * ETH_ALEN) + offset, &fs->h_u.ether_spec.h_proto, &fs->m_u.ether_spec.h_proto, sizeof(fs->h_u.ether_spec.h_proto)); @@ -664,21 +647,21 @@ static int bcmgenet_hfb_create_rxnfc_filter(struct bcmgenet_priv *priv, /* Specify IP Ether Type */ val_16 = htons(ETH_P_IP); mask_16 = 0xFFFF; - bcmgenet_hfb_insert_data(f_data, (2 * ETH_ALEN) + offset, + bcmgenet_hfb_insert_data(priv, f, (2 * ETH_ALEN) + offset, &val_16, &mask_16, sizeof(val_16)); - bcmgenet_hfb_insert_data(f_data, 15 + offset, + bcmgenet_hfb_insert_data(priv, f, 15 + offset, &fs->h_u.usr_ip4_spec.tos, &fs->m_u.usr_ip4_spec.tos, sizeof(fs->h_u.usr_ip4_spec.tos)); - bcmgenet_hfb_insert_data(f_data, 23 + offset, + bcmgenet_hfb_insert_data(priv, f, 23 + offset, &fs->h_u.usr_ip4_spec.proto, &fs->m_u.usr_ip4_spec.proto, sizeof(fs->h_u.usr_ip4_spec.proto)); - bcmgenet_hfb_insert_data(f_data, 26 + offset, + bcmgenet_hfb_insert_data(priv, f, 26 + offset, &fs->h_u.usr_ip4_spec.ip4src, &fs->m_u.usr_ip4_spec.ip4src, sizeof(fs->h_u.usr_ip4_spec.ip4src)); - bcmgenet_hfb_insert_data(f_data, 30 + offset, + bcmgenet_hfb_insert_data(priv, f, 30 + offset, &fs->h_u.usr_ip4_spec.ip4dst, &fs->m_u.usr_ip4_spec.ip4dst, sizeof(fs->h_u.usr_ip4_spec.ip4dst)); @@ -688,11 +671,11 @@ static int bcmgenet_hfb_create_rxnfc_filter(struct bcmgenet_priv *priv, /* Only supports 20 byte IPv4 header */ val_8 = 0x45; mask_8 = 0xFF; - bcmgenet_hfb_insert_data(f_data, ETH_HLEN + offset, + bcmgenet_hfb_insert_data(priv, f, ETH_HLEN + offset, &val_8, &mask_8, sizeof(val_8)); size = sizeof(fs->h_u.usr_ip4_spec.l4_4_bytes); - bcmgenet_hfb_insert_data(f_data, + bcmgenet_hfb_insert_data(priv, f, ETH_HLEN + 20 + offset, &fs->h_u.usr_ip4_spec.l4_4_bytes, &fs->m_u.usr_ip4_spec.l4_4_bytes, @@ -701,34 +684,42 @@ static int bcmgenet_hfb_create_rxnfc_filter(struct bcmgenet_priv *priv, break; } + bcmgenet_hfb_set_filter_length(priv, f, 2 * f_length); if (!fs->ring_cookie || fs->ring_cookie == RX_CLS_FLOW_WAKE) { /* Ring 0 flows can be handled by the default Descriptor Ring * We'll map them to ring 0, but don't enable the filter */ - bcmgenet_hfb_set_filter(priv, f_data, f_length, 0, - fs->location); + bcmgenet_hfb_set_filter_rx_queue_mapping(priv, f, 0); rule->state = BCMGENET_RXNFC_STATE_DISABLED; } else { /* Other Rx rings are direct mapped here */ - bcmgenet_hfb_set_filter(priv, f_data, f_length, - fs->ring_cookie, fs->location); - bcmgenet_hfb_enable_filter(priv, fs->location); + bcmgenet_hfb_set_filter_rx_queue_mapping(priv, f, + fs->ring_cookie); + bcmgenet_hfb_enable_filter(priv, f); rule->state = BCMGENET_RXNFC_STATE_ENABLED; } - - kfree(f_data); - - return err; } /* bcmgenet_hfb_clear * * Clear Hardware Filter Block and disable all filtering. */ +static void bcmgenet_hfb_clear_filter(struct bcmgenet_priv *priv, u32 f_index) +{ + u32 base, i; + + base = f_index * priv->hw_params->hfb_filter_size; + for (i = 0; i < priv->hw_params->hfb_filter_size; i++) + bcmgenet_hfb_writel(priv, 0x0, (base + i) * sizeof(u32)); +} + static void bcmgenet_hfb_clear(struct bcmgenet_priv *priv) { u32 i; + if (GENET_IS_V1(priv) || GENET_IS_V2(priv)) + return; + bcmgenet_hfb_reg_writel(priv, 0x0, HFB_CTRL); bcmgenet_hfb_reg_writel(priv, 0x0, HFB_FLT_ENABLE_V3PLUS); bcmgenet_hfb_reg_writel(priv, 0x0, HFB_FLT_ENABLE_V3PLUS + 4); @@ -740,19 +731,18 @@ static void bcmgenet_hfb_clear(struct bcmgenet_priv *priv) bcmgenet_hfb_reg_writel(priv, 0x0, HFB_FLT_LEN_V3PLUS + i * sizeof(u32)); - for (i = 0; i < priv->hw_params->hfb_filter_cnt * - priv->hw_params->hfb_filter_size; i++) - bcmgenet_hfb_writel(priv, 0x0, i * sizeof(u32)); + for (i = 0; i < priv->hw_params->hfb_filter_cnt; i++) + bcmgenet_hfb_clear_filter(priv, i); } static void bcmgenet_hfb_init(struct bcmgenet_priv *priv) { int i; + INIT_LIST_HEAD(&priv->rxnfc_list); if (GENET_IS_V1(priv) || GENET_IS_V2(priv)) return; - INIT_LIST_HEAD(&priv->rxnfc_list); for (i = 0; i < MAX_NUM_OF_FS_RULES; i++) { INIT_LIST_HEAD(&priv->rxnfc_rules[i].list); priv->rxnfc_rules[i].state = BCMGENET_RXNFC_STATE_UNUSED; @@ -1437,18 +1427,15 @@ static int bcmgenet_insert_flow(struct net_device *dev, loc_rule = &priv->rxnfc_rules[cmd->fs.location]; if (loc_rule->state == BCMGENET_RXNFC_STATE_ENABLED) bcmgenet_hfb_disable_filter(priv, cmd->fs.location); - if (loc_rule->state != BCMGENET_RXNFC_STATE_UNUSED) + if (loc_rule->state != BCMGENET_RXNFC_STATE_UNUSED) { list_del(&loc_rule->list); + bcmgenet_hfb_clear_filter(priv, cmd->fs.location); + } loc_rule->state = BCMGENET_RXNFC_STATE_UNUSED; memcpy(&loc_rule->fs, &cmd->fs, sizeof(struct ethtool_rx_flow_spec)); - err = bcmgenet_hfb_create_rxnfc_filter(priv, loc_rule); - if (err) { - netdev_err(dev, "rxnfc: Could not install rule (%d)\n", - err); - return err; - } + bcmgenet_hfb_create_rxnfc_filter(priv, loc_rule); list_add_tail(&loc_rule->list, &priv->rxnfc_list); @@ -1473,8 +1460,10 @@ static int bcmgenet_delete_flow(struct net_device *dev, if (rule->state == BCMGENET_RXNFC_STATE_ENABLED) bcmgenet_hfb_disable_filter(priv, cmd->fs.location); - if (rule->state != BCMGENET_RXNFC_STATE_UNUSED) + if (rule->state != BCMGENET_RXNFC_STATE_UNUSED) { list_del(&rule->list); + bcmgenet_hfb_clear_filter(priv, cmd->fs.location); + } rule->state = BCMGENET_RXNFC_STATE_UNUSED; memset(&rule->fs, 0, sizeof(struct ethtool_rx_flow_spec)); @@ -4129,8 +4118,9 @@ static int bcmgenet_resume(struct device *d) { struct net_device *dev = dev_get_drvdata(d); struct bcmgenet_priv *priv = netdev_priv(dev); + struct bcmgenet_rxnfc_rule *rule; unsigned long dma_ctrl; - u32 offset, reg; + u32 reg; int ret; if (!netif_running(dev)) @@ -4161,10 +4151,11 @@ static int bcmgenet_resume(struct device *d) bcmgenet_set_hw_addr(priv, dev->dev_addr); - offset = HFB_FLT_ENABLE_V3PLUS; - bcmgenet_hfb_reg_writel(priv, priv->hfb_en[1], offset); - bcmgenet_hfb_reg_writel(priv, priv->hfb_en[2], offset + sizeof(u32)); - bcmgenet_hfb_reg_writel(priv, priv->hfb_en[0], HFB_CTRL); + /* Restore hardware filters */ + bcmgenet_hfb_clear(priv); + list_for_each_entry(rule, &priv->rxnfc_list, list) + if (rule->state != BCMGENET_RXNFC_STATE_UNUSED) + bcmgenet_hfb_create_rxnfc_filter(priv, rule); if (priv->internal_phy) { reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); @@ -4208,7 +4199,6 @@ static int bcmgenet_suspend(struct device *d) { struct net_device *dev = dev_get_drvdata(d); struct bcmgenet_priv *priv = netdev_priv(dev); - u32 offset; if (!netif_running(dev)) return 0; @@ -4220,11 +4210,7 @@ static int bcmgenet_suspend(struct device *d) if (!device_may_wakeup(d)) phy_suspend(dev->phydev); - /* Preserve filter state and disable filtering */ - priv->hfb_en[0] = bcmgenet_hfb_reg_readl(priv, HFB_CTRL); - offset = HFB_FLT_ENABLE_V3PLUS; - priv->hfb_en[1] = bcmgenet_hfb_reg_readl(priv, offset); - priv->hfb_en[2] = bcmgenet_hfb_reg_readl(priv, offset + sizeof(u32)); + /* Disable filtering */ bcmgenet_hfb_reg_writel(priv, 0, HFB_CTRL); return 0; diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h index a12cb59298f4..f6ca01da141d 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h @@ -696,7 +696,6 @@ struct bcmgenet_priv { u32 wolopts; u8 sopass[SOPASS_MAX]; bool wol_active; - u32 hfb_en[3]; struct bcmgenet_mib_counters mib; -- cgit v1.2.3 From 0b4a66a389d1ff5dab29f688fcfe36482bc889a2 Mon Sep 17 00:00:00 2001 From: Wang Hai Date: Fri, 17 Jul 2020 15:10:16 +0800 Subject: nfc: nci: add missed destroy_workqueue in nci_register_device When nfc_register_device fails in nci_register_device, destroy_workqueue() shouled be called to destroy ndev->tx_wq. Fixes: 3c1c0f5dc80b ("NFC: NCI: Fix nci_register_device init sequence") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: David S. Miller --- net/nfc/nci/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c index 7cd524884304..78ea8c94dcba 100644 --- a/net/nfc/nci/core.c +++ b/net/nfc/nci/core.c @@ -1228,10 +1228,13 @@ int nci_register_device(struct nci_dev *ndev) rc = nfc_register_device(ndev->nfc_dev); if (rc) - goto destroy_rx_wq_exit; + goto destroy_tx_wq_exit; goto exit; +destroy_tx_wq_exit: + destroy_workqueue(ndev->tx_wq); + destroy_rx_wq_exit: destroy_workqueue(ndev->rx_wq); -- cgit v1.2.3 From baedb87d1b53532f81b4bd0387f83b05d4f7eb9a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 17 Jul 2020 18:00:02 +0200 Subject: genirq/affinity: Handle affinity setting on inactive interrupts correctly Setting interrupt affinity on inactive interrupts is inconsistent when hierarchical irq domains are enabled. The core code should just store the affinity and not call into the irq chip driver for inactive interrupts because the chip drivers may not be in a state to handle such requests. X86 has a hacky workaround for that but all other irq chips have not which causes problems e.g. on GIC V3 ITS. Instead of adding more ugly hacks all over the place, solve the problem in the core code. If the affinity is set on an inactive interrupt then: - Store it in the irq descriptors affinity mask - Update the effective affinity to reflect that so user space has a consistent view - Don't call into the irq chip driver This is the core equivalent of the X86 workaround and works correctly because the affinity setting is established in the irq chip when the interrupt is activated later on. Note, that this is only effective when hierarchical irq domains are enabled by the architecture. Doing it unconditionally would break legacy irq chip implementations. For hierarchial irq domains this works correctly as none of the drivers can have a dependency on affinity setting in inactive state by design. Remove the X86 workaround as it is not longer required. Fixes: 02edee152d6e ("x86/apic/vector: Ignore set_affinity call for inactive interrupts") Reported-by: Ali Saidi Signed-off-by: Thomas Gleixner Tested-by: Ali Saidi Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de --- arch/x86/kernel/apic/vector.c | 22 +++++----------------- kernel/irq/manage.c | 37 +++++++++++++++++++++++++++++++++++-- 2 files changed, 40 insertions(+), 19 deletions(-) diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c index cc8b16f89dd4..7649da2478d8 100644 --- a/arch/x86/kernel/apic/vector.c +++ b/arch/x86/kernel/apic/vector.c @@ -446,12 +446,10 @@ static int x86_vector_activate(struct irq_domain *dom, struct irq_data *irqd, trace_vector_activate(irqd->irq, apicd->is_managed, apicd->can_reserve, reserve); - /* Nothing to do for fixed assigned vectors */ - if (!apicd->can_reserve && !apicd->is_managed) - return 0; - raw_spin_lock_irqsave(&vector_lock, flags); - if (reserve || irqd_is_managed_and_shutdown(irqd)) + if (!apicd->can_reserve && !apicd->is_managed) + assign_irq_vector_any_locked(irqd); + else if (reserve || irqd_is_managed_and_shutdown(irqd)) vector_assign_managed_shutdown(irqd); else if (apicd->is_managed) ret = activate_managed(irqd); @@ -774,20 +772,10 @@ void lapic_offline(void) static int apic_set_affinity(struct irq_data *irqd, const struct cpumask *dest, bool force) { - struct apic_chip_data *apicd = apic_chip_data(irqd); int err; - /* - * Core code can call here for inactive interrupts. For inactive - * interrupts which use managed or reservation mode there is no - * point in going through the vector assignment right now as the - * activation will assign a vector which fits the destination - * cpumask. Let the core code store the destination mask and be - * done with it. - */ - if (!irqd_is_activated(irqd) && - (apicd->is_managed || apicd->can_reserve)) - return IRQ_SET_MASK_OK; + if (WARN_ON_ONCE(!irqd_is_activated(irqd))) + return -EIO; raw_spin_lock(&vector_lock); cpumask_and(vector_searchmask, dest, cpu_online_mask); diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 761911168438..2a9fec53e159 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -195,9 +195,9 @@ void irq_set_thread_affinity(struct irq_desc *desc) set_bit(IRQTF_AFFINITY, &action->thread_flags); } +#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK static void irq_validate_effective_affinity(struct irq_data *data) { -#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK const struct cpumask *m = irq_data_get_effective_affinity_mask(data); struct irq_chip *chip = irq_data_get_irq_chip(data); @@ -205,9 +205,19 @@ static void irq_validate_effective_affinity(struct irq_data *data) return; pr_warn_once("irq_chip %s did not update eff. affinity mask of irq %u\n", chip->name, data->irq); -#endif } +static inline void irq_init_effective_affinity(struct irq_data *data, + const struct cpumask *mask) +{ + cpumask_copy(irq_data_get_effective_affinity_mask(data), mask); +} +#else +static inline void irq_validate_effective_affinity(struct irq_data *data) { } +static inline void irq_init_effective_affinity(struct irq_data *data, + const struct cpumask *mask) { } +#endif + int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force) { @@ -304,6 +314,26 @@ static int irq_try_set_affinity(struct irq_data *data, return ret; } +static bool irq_set_affinity_deactivated(struct irq_data *data, + const struct cpumask *mask, bool force) +{ + struct irq_desc *desc = irq_data_to_desc(data); + + /* + * If the interrupt is not yet activated, just store the affinity + * mask and do not call the chip driver at all. On activation the + * driver has to make sure anyway that the interrupt is in a + * useable state so startup works. + */ + if (!IS_ENABLED(CONFIG_IRQ_DOMAIN_HIERARCHY) || irqd_is_activated(data)) + return false; + + cpumask_copy(desc->irq_common_data.affinity, mask); + irq_init_effective_affinity(data, mask); + irqd_set(data, IRQD_AFFINITY_SET); + return true; +} + int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask, bool force) { @@ -314,6 +344,9 @@ int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask, if (!chip || !chip->irq_set_affinity) return -EINVAL; + if (irq_set_affinity_deactivated(data, mask, force)) + return 0; + if (irq_can_move_pcntxt(data) && !irqd_is_setaffinity_pending(data)) { ret = irq_try_set_affinity(data, mask, force); } else { -- cgit v1.2.3 From 23e500e88723f243c27e1b26c9d035d4cdd1b24a Mon Sep 17 00:00:00 2001 From: Nikita Danilov Date: Fri, 17 Jul 2020 23:39:49 +0300 Subject: net: atlantic: disable PTP on AQC111, AQC112 This patch disables PTP on AQC111 and AQC112 due to a known HW issue, which can cause datapath issues. Ideally PTP block should have been disabled via PHY provisioning, but unfortunately many units have been shipped with enabled PTP block. Thus, we have to work around this in the driver. Fixes: dbcd6806af420 ("net: aquantia: add support for Phy access") Signed-off-by: Nikita Danilov Signed-off-by: Mark Starovoytov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_hw.h | 1 + drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 9 +++++++ drivers/net/ethernet/aquantia/atlantic/aq_nic.h | 2 ++ drivers/net/ethernet/aquantia/atlantic/aq_phy.c | 29 ++++++++++++++++++++-- drivers/net/ethernet/aquantia/atlantic/aq_phy.h | 8 ++++-- .../ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 19 ++++++++++++++ .../ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.h | 10 +++----- 7 files changed, 68 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h index ed5b465bc664..992fedbe4ce3 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h @@ -64,6 +64,7 @@ struct aq_hw_caps_s { u8 rx_rings; bool flow_control; bool is_64_dma; + u32 quirks; u32 priv_data_len; }; diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 4435c6374f7e..7c7bf6bf163f 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -415,6 +415,15 @@ int aq_nic_init(struct aq_nic_s *self) self->aq_nic_cfg.aq_hw_caps->media_type == AQ_HW_MEDIA_TYPE_TP) { self->aq_hw->phy_id = HW_ATL_PHY_ID_MAX; err = aq_phy_init(self->aq_hw); + + /* Disable the PTP on NICs where it's known to cause datapath + * problems. + * Ideally this should have been done by PHY provisioning, but + * many units have been shipped with enabled PTP block already. + */ + if (self->aq_nic_cfg.aq_hw_caps->quirks & AQ_NIC_QUIRK_BAD_PTP) + if (self->aq_hw->phy_id != HW_ATL_PHY_ID_MAX) + aq_phy_disable_ptp(self->aq_hw); } for (i = 0U; i < self->aq_vecs; i++) { diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h index 2ab003065e62..439ce9692dac 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h @@ -81,6 +81,8 @@ struct aq_nic_cfg_s { #define AQ_NIC_FLAG_ERR_UNPLUG 0x40000000U #define AQ_NIC_FLAG_ERR_HW 0x80000000U +#define AQ_NIC_QUIRK_BAD_PTP BIT(0) + #define AQ_NIC_WOL_MODES (WAKE_MAGIC |\ WAKE_PHY) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_phy.c b/drivers/net/ethernet/aquantia/atlantic/aq_phy.c index 51ae921e3e1f..949ac2351701 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_phy.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_phy.c @@ -1,10 +1,14 @@ // SPDX-License-Identifier: GPL-2.0-only -/* aQuantia Corporation Network Driver - * Copyright (C) 2018-2019 aQuantia Corporation. All rights reserved +/* Atlantic Network Driver + * + * Copyright (C) 2018-2019 aQuantia Corporation + * Copyright (C) 2019-2020 Marvell International Ltd. */ #include "aq_phy.h" +#define HW_ATL_PTP_DISABLE_MSK BIT(10) + bool aq_mdio_busy_wait(struct aq_hw_s *aq_hw) { int err = 0; @@ -145,3 +149,24 @@ bool aq_phy_init(struct aq_hw_s *aq_hw) return true; } + +void aq_phy_disable_ptp(struct aq_hw_s *aq_hw) +{ + static const u16 ptp_registers[] = { + 0x031e, + 0x031d, + 0x031c, + 0x031b, + }; + u16 val; + int i; + + for (i = 0; i < ARRAY_SIZE(ptp_registers); i++) { + val = aq_phy_read_reg(aq_hw, MDIO_MMD_VEND1, + ptp_registers[i]); + + aq_phy_write_reg(aq_hw, MDIO_MMD_VEND1, + ptp_registers[i], + val & ~HW_ATL_PTP_DISABLE_MSK); + } +} diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_phy.h b/drivers/net/ethernet/aquantia/atlantic/aq_phy.h index 84b72ad04a4a..86cc1ee836e2 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_phy.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_phy.h @@ -1,6 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -/* aQuantia Corporation Network Driver - * Copyright (C) 2018-2019 aQuantia Corporation. All rights reserved +/* Atlantic Network Driver + * + * Copyright (C) 2018-2019 aQuantia Corporation + * Copyright (C) 2019-2020 Marvell International Ltd. */ #ifndef AQ_PHY_H @@ -29,4 +31,6 @@ bool aq_phy_init_phy_id(struct aq_hw_s *aq_hw); bool aq_phy_init(struct aq_hw_s *aq_hw); +void aq_phy_disable_ptp(struct aq_hw_s *aq_hw); + #endif /* AQ_PHY_H */ diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 14d79f70cad7..d2bc6b289a54 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -93,6 +93,25 @@ const struct aq_hw_caps_s hw_atl_b0_caps_aqc109 = { AQ_NIC_RATE_100M, }; +const struct aq_hw_caps_s hw_atl_b0_caps_aqc111 = { + DEFAULT_B0_BOARD_BASIC_CAPABILITIES, + .media_type = AQ_HW_MEDIA_TYPE_TP, + .link_speed_msk = AQ_NIC_RATE_5G | + AQ_NIC_RATE_2G5 | + AQ_NIC_RATE_1G | + AQ_NIC_RATE_100M, + .quirks = AQ_NIC_QUIRK_BAD_PTP, +}; + +const struct aq_hw_caps_s hw_atl_b0_caps_aqc112 = { + DEFAULT_B0_BOARD_BASIC_CAPABILITIES, + .media_type = AQ_HW_MEDIA_TYPE_TP, + .link_speed_msk = AQ_NIC_RATE_2G5 | + AQ_NIC_RATE_1G | + AQ_NIC_RATE_100M, + .quirks = AQ_NIC_QUIRK_BAD_PTP, +}; + static int hw_atl_b0_hw_reset(struct aq_hw_s *self) { int err = 0; diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.h index 30f468f2084d..16091af17980 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.h @@ -18,17 +18,15 @@ extern const struct aq_hw_caps_s hw_atl_b0_caps_aqc100; extern const struct aq_hw_caps_s hw_atl_b0_caps_aqc107; extern const struct aq_hw_caps_s hw_atl_b0_caps_aqc108; extern const struct aq_hw_caps_s hw_atl_b0_caps_aqc109; - -#define hw_atl_b0_caps_aqc111 hw_atl_b0_caps_aqc108 -#define hw_atl_b0_caps_aqc112 hw_atl_b0_caps_aqc109 +extern const struct aq_hw_caps_s hw_atl_b0_caps_aqc111; +extern const struct aq_hw_caps_s hw_atl_b0_caps_aqc112; #define hw_atl_b0_caps_aqc100s hw_atl_b0_caps_aqc100 #define hw_atl_b0_caps_aqc107s hw_atl_b0_caps_aqc107 #define hw_atl_b0_caps_aqc108s hw_atl_b0_caps_aqc108 #define hw_atl_b0_caps_aqc109s hw_atl_b0_caps_aqc109 - -#define hw_atl_b0_caps_aqc111s hw_atl_b0_caps_aqc108 -#define hw_atl_b0_caps_aqc112s hw_atl_b0_caps_aqc109 +#define hw_atl_b0_caps_aqc111s hw_atl_b0_caps_aqc111 +#define hw_atl_b0_caps_aqc112s hw_atl_b0_caps_aqc112 extern const struct aq_hw_ops hw_atl_ops_b0; -- cgit v1.2.3 From 2ccb0161a0e9eb06f538557d38987e436fc39b8d Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Sat, 18 Jul 2020 01:32:21 +0200 Subject: net: macb: use phy_interface_mode_is_rgmii everywhere There is one RGMII check not using the phy_interface_mode_is_rgmii() helper. This prevents the driver from configuring the MAC properly when using a phy-mode that is not just rgmii, e.g. rgmii-rxid. This became an issue on sama5d3 xplained since the ksz9031 driver is hadling phy-mode properly and the phy-mode has to be set to rgmii-rxid. Fixes: bcf3440c6dd78bfe ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Signed-off-by: Alexandre Belloni Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index f1f0976e7669..2213e6ab8151 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -3736,7 +3736,7 @@ static int macb_init(struct platform_device *pdev) if (!(bp->caps & MACB_CAPS_USRIO_DISABLED)) { val = 0; - if (bp->phy_interface == PHY_INTERFACE_MODE_RGMII) + if (phy_interface_mode_is_rgmii(bp->phy_interface)) val = GEM_BIT(RGMII); else if (bp->phy_interface == PHY_INTERFACE_MODE_RMII && (bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII)) -- cgit v1.2.3 From 7f5f81406e2b36785f1e25fe5209edd9dd3610d7 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 17 Jul 2020 16:37:25 -0700 Subject: rhashtable: drop duplicated word in Drop the doubled word "be" in a comment. Signed-off-by: Randy Dunlap Cc: Thomas Graf Cc: Herbert Xu Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- include/linux/rhashtable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/rhashtable.h b/include/linux/rhashtable.h index 70ebef866cc8..d3432ee65de7 100644 --- a/include/linux/rhashtable.h +++ b/include/linux/rhashtable.h @@ -33,7 +33,7 @@ * of two or more hash tables when the rhashtable is being resized. * The end of the chain is marked with a special nulls marks which has * the least significant bit set but otherwise stores the address of - * the hash bucket. This allows us to be be sure we've found the end + * the hash bucket. This allows us to be sure we've found the end * of the right list. * The value stored in the hash bucket has BIT(0) used as a lock bit. * This bit must be atomically set before any changes are made to -- cgit v1.2.3 From 807abcb0883439af5ead73f3308310453b97b624 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 17 Jul 2020 17:09:27 -0600 Subject: io_uring: ensure double poll additions work with both request types The double poll additions were centered around doing POLL_ADD on file descriptors that use more than one waitqueue (typically one for read, one for write) when being polled. However, it can also end up being triggered for when we use poll triggered retry. For that case, we cannot safely use req->io, as that could be used by the request type itself. Add a second io_poll_iocb pointer in the structure we allocate for poll based retry, and ensure we use the right one from the two paths. Fixes: 18bceab101ad ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by: Jens Axboe --- fs/io_uring.c | 47 ++++++++++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 21 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 74bc4a04befa..53232ac3da17 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -605,6 +605,7 @@ enum { struct async_poll { struct io_poll_iocb poll; + struct io_poll_iocb *double_poll; struct io_wq_work work; }; @@ -4159,9 +4160,9 @@ static bool io_poll_rewait(struct io_kiocb *req, struct io_poll_iocb *poll) return false; } -static void io_poll_remove_double(struct io_kiocb *req) +static void io_poll_remove_double(struct io_kiocb *req, void *data) { - struct io_poll_iocb *poll = (struct io_poll_iocb *) req->io; + struct io_poll_iocb *poll = data; lockdep_assert_held(&req->ctx->completion_lock); @@ -4181,7 +4182,7 @@ static void io_poll_complete(struct io_kiocb *req, __poll_t mask, int error) { struct io_ring_ctx *ctx = req->ctx; - io_poll_remove_double(req); + io_poll_remove_double(req, req->io); req->poll.done = true; io_cqring_fill_event(req, error ? error : mangle_poll(mask)); io_commit_cqring(ctx); @@ -4224,21 +4225,21 @@ static int io_poll_double_wake(struct wait_queue_entry *wait, unsigned mode, int sync, void *key) { struct io_kiocb *req = wait->private; - struct io_poll_iocb *poll = (struct io_poll_iocb *) req->io; + struct io_poll_iocb *poll = req->apoll->double_poll; __poll_t mask = key_to_poll(key); /* for instances that support it check for an event match first: */ if (mask && !(mask & poll->events)) return 0; - if (req->poll.head) { + if (poll && poll->head) { bool done; - spin_lock(&req->poll.head->lock); - done = list_empty(&req->poll.wait.entry); + spin_lock(&poll->head->lock); + done = list_empty(&poll->wait.entry); if (!done) - list_del_init(&req->poll.wait.entry); - spin_unlock(&req->poll.head->lock); + list_del_init(&poll->wait.entry); + spin_unlock(&poll->head->lock); if (!done) __io_async_wake(req, poll, mask, io_poll_task_func); } @@ -4258,7 +4259,8 @@ static void io_init_poll_iocb(struct io_poll_iocb *poll, __poll_t events, } static void __io_queue_proc(struct io_poll_iocb *poll, struct io_poll_table *pt, - struct wait_queue_head *head) + struct wait_queue_head *head, + struct io_poll_iocb **poll_ptr) { struct io_kiocb *req = pt->req; @@ -4269,7 +4271,7 @@ static void __io_queue_proc(struct io_poll_iocb *poll, struct io_poll_table *pt, */ if (unlikely(poll->head)) { /* already have a 2nd entry, fail a third attempt */ - if (req->io) { + if (*poll_ptr) { pt->error = -EINVAL; return; } @@ -4281,7 +4283,7 @@ static void __io_queue_proc(struct io_poll_iocb *poll, struct io_poll_table *pt, io_init_poll_iocb(poll, req->poll.events, io_poll_double_wake); refcount_inc(&req->refs); poll->wait.private = req; - req->io = (void *) poll; + *poll_ptr = poll; } pt->error = 0; @@ -4293,8 +4295,9 @@ static void io_async_queue_proc(struct file *file, struct wait_queue_head *head, struct poll_table_struct *p) { struct io_poll_table *pt = container_of(p, struct io_poll_table, pt); + struct async_poll *apoll = pt->req->apoll; - __io_queue_proc(&pt->req->apoll->poll, pt, head); + __io_queue_proc(&apoll->poll, pt, head, &apoll->double_poll); } static void io_sq_thread_drop_mm(struct io_ring_ctx *ctx) @@ -4344,11 +4347,13 @@ static void io_async_task_func(struct callback_head *cb) } } + io_poll_remove_double(req, apoll->double_poll); spin_unlock_irq(&ctx->completion_lock); /* restore ->work in case we need to retry again */ if (req->flags & REQ_F_WORK_INITIALIZED) memcpy(&req->work, &apoll->work, sizeof(req->work)); + kfree(apoll->double_poll); kfree(apoll); if (!canceled) { @@ -4436,7 +4441,6 @@ static bool io_arm_poll_handler(struct io_kiocb *req) struct async_poll *apoll; struct io_poll_table ipt; __poll_t mask, ret; - bool had_io; if (!req->file || !file_can_poll(req->file)) return false; @@ -4448,11 +4452,11 @@ static bool io_arm_poll_handler(struct io_kiocb *req) apoll = kmalloc(sizeof(*apoll), GFP_ATOMIC); if (unlikely(!apoll)) return false; + apoll->double_poll = NULL; req->flags |= REQ_F_POLLED; if (req->flags & REQ_F_WORK_INITIALIZED) memcpy(&apoll->work, &req->work, sizeof(req->work)); - had_io = req->io != NULL; io_get_req_task(req); req->apoll = apoll; @@ -4470,13 +4474,11 @@ static bool io_arm_poll_handler(struct io_kiocb *req) ret = __io_arm_poll_handler(req, &apoll->poll, &ipt, mask, io_async_wake); if (ret) { - ipt.error = 0; - /* only remove double add if we did it here */ - if (!had_io) - io_poll_remove_double(req); + io_poll_remove_double(req, apoll->double_poll); spin_unlock_irq(&ctx->completion_lock); if (req->flags & REQ_F_WORK_INITIALIZED) memcpy(&req->work, &apoll->work, sizeof(req->work)); + kfree(apoll->double_poll); kfree(apoll); return false; } @@ -4507,11 +4509,13 @@ static bool io_poll_remove_one(struct io_kiocb *req) bool do_complete; if (req->opcode == IORING_OP_POLL_ADD) { - io_poll_remove_double(req); + io_poll_remove_double(req, req->io); do_complete = __io_poll_remove_one(req, &req->poll); } else { struct async_poll *apoll = req->apoll; + io_poll_remove_double(req, apoll->double_poll); + /* non-poll requests have submit ref still */ do_complete = __io_poll_remove_one(req, &apoll->poll); if (do_complete) { @@ -4524,6 +4528,7 @@ static bool io_poll_remove_one(struct io_kiocb *req) if (req->flags & REQ_F_WORK_INITIALIZED) memcpy(&req->work, &apoll->work, sizeof(req->work)); + kfree(apoll->double_poll); kfree(apoll); } } @@ -4624,7 +4629,7 @@ static void io_poll_queue_proc(struct file *file, struct wait_queue_head *head, { struct io_poll_table *pt = container_of(p, struct io_poll_table, pt); - __io_queue_proc(&pt->req->poll, pt, head); + __io_queue_proc(&pt->req->poll, pt, head, (struct io_poll_iocb **) &pt->req->io); } static int io_poll_add_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe) -- cgit v1.2.3 From 6d6148bc78d2f002ecc67b801c5f55a0cc5184c8 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Fri, 17 Jul 2020 10:55:09 -0400 Subject: net: hsr: fix incorrect lsdu size in the tag of HSR frames for small frames For small Ethernet frames with size less than minimum size 66 for HSR vs 60 for regular Ethernet frames, hsr driver currently doesn't pad the frame to make it minimum size. This results in incorrect LSDU size being populated in the HSR tag for these frames. Fix this by padding the frame to the minimum size applicable for HSR. Signed-off-by: Murali Karicheri Signed-off-by: David S. Miller --- net/hsr/hsr_forward.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/hsr/hsr_forward.c b/net/hsr/hsr_forward.c index ed13760463de..e42fd356f073 100644 --- a/net/hsr/hsr_forward.c +++ b/net/hsr/hsr_forward.c @@ -127,6 +127,9 @@ static void hsr_fill_tag(struct sk_buff *skb, struct hsr_frame_info *frame, int lane_id; int lsdu_size; + /* pad to minimum packet size which is 60 + 6 (HSR tag) */ + skb_put_padto(skb, ETH_ZLEN + HSR_HLEN); + if (port->type == HSR_PT_SLAVE_A) lane_id = 0; else -- cgit v1.2.3 From eea9f73e1ff9b99fbb937d41bb07c5bb2ae9ea2f Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Fri, 17 Jul 2020 10:55:10 -0400 Subject: net: hsr: validate address B before copying to skb Validate MAC address before copying the same to outgoing frame skb destination address. Since a node can have zero mac address for Link B until a valid frame is received over that link, this fix address the issue of a zero MAC address being in the packet. Signed-off-by: Murali Karicheri Signed-off-by: David S. Miller --- net/hsr/hsr_framereg.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/hsr/hsr_framereg.c b/net/hsr/hsr_framereg.c index 03b891904314..530de24b1fb5 100644 --- a/net/hsr/hsr_framereg.c +++ b/net/hsr/hsr_framereg.c @@ -325,7 +325,8 @@ void hsr_addr_subst_dest(struct hsr_node *node_src, struct sk_buff *skb, if (port->type != node_dst->addr_B_port) return; - ether_addr_copy(eth_hdr(skb)->h_dest, node_dst->macaddress_B); + if (is_valid_ether_addr(node_dst->macaddress_B)) + ether_addr_copy(eth_hdr(skb)->h_dest, node_dst->macaddress_B); } void hsr_register_frame_in(struct hsr_node *node, struct hsr_port *port, -- cgit v1.2.3 From 9b8737788af6c76ef93e3161ee2cdc4ddcc034ca Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Fri, 17 Jul 2020 22:01:43 +0300 Subject: mlxsw: core: Fix wrong SFP EEPROM reading for upper pages 1-3 Fix wrong reading of upper pages for SFP EEPROM. According to "Memory Organization" figure in SFF-8472 spec: When reading upper pages 1, 2 and 3 the offset should be set relative to zero and I2C high address 0x51 [1010001X (A2h)] is to be used. Fixes: a45bfb5a5070 ("mlxsw: core: Extend QSFP EEPROM size for ethtool") Signed-off-by: Vadim Pasternak Reviewed-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/core_env.c | 48 +++++++++++++++++--------- 1 file changed, 32 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_env.c b/drivers/net/ethernet/mellanox/mlxsw/core_env.c index 08215fed193d..a7d86df7123f 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core_env.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core_env.c @@ -45,7 +45,7 @@ static int mlxsw_env_validate_cable_ident(struct mlxsw_core *core, int id, static int mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core, int module, u16 offset, u16 size, void *data, - unsigned int *p_read_size) + bool qsfp, unsigned int *p_read_size) { char eeprom_tmp[MLXSW_REG_MCIA_EEPROM_SIZE]; char mcia_pl[MLXSW_REG_MCIA_LEN]; @@ -54,6 +54,10 @@ mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core, int module, int status; int err; + /* MCIA register accepts buffer size <= 48. Page of size 128 should be + * read by chunks of size 48, 48, 32. Align the size of the last chunk + * to avoid reading after the end of the page. + */ size = min_t(u16, size, MLXSW_REG_MCIA_EEPROM_SIZE); if (offset < MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH && @@ -63,18 +67,25 @@ mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core, int module, i2c_addr = MLXSW_REG_MCIA_I2C_ADDR_LOW; if (offset >= MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) { - page = MLXSW_REG_MCIA_PAGE_GET(offset); - offset -= MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH * page; - /* When reading upper pages 1, 2 and 3 the offset starts at - * 128. Please refer to "QSFP+ Memory Map" figure in SFF-8436 - * specification for graphical depiction. - * MCIA register accepts buffer size <= 48. Page of size 128 - * should be read by chunks of size 48, 48, 32. Align the size - * of the last chunk to avoid reading after the end of the - * page. - */ - if (offset + size > MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) - size = MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH - offset; + if (qsfp) { + /* When reading upper pages 1, 2 and 3 the offset + * starts at 128. Please refer to "QSFP+ Memory Map" + * figure in SFF-8436 specification for graphical + * depiction. + */ + page = MLXSW_REG_MCIA_PAGE_GET(offset); + offset -= MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH * page; + if (offset + size > MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) + size = MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH - offset; + } else { + /* When reading upper pages 1, 2 and 3 the offset + * starts at 0 and I2C high address is used. Please refer + * refer to "Memory Organization" figure in SFF-8472 + * specification for graphical depiction. + */ + i2c_addr = MLXSW_REG_MCIA_I2C_ADDR_HIGH; + offset -= MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH; + } } mlxsw_reg_mcia_pack(mcia_pl, module, 0, page, offset, size, i2c_addr); @@ -166,7 +177,7 @@ int mlxsw_env_get_module_info(struct mlxsw_core *mlxsw_core, int module, int err; err = mlxsw_env_query_module_eeprom(mlxsw_core, module, 0, offset, - module_info, &read_size); + module_info, false, &read_size); if (err) return err; @@ -197,7 +208,7 @@ int mlxsw_env_get_module_info(struct mlxsw_core *mlxsw_core, int module, /* Verify if transceiver provides diagnostic monitoring page */ err = mlxsw_env_query_module_eeprom(mlxsw_core, module, SFP_DIAGMON, 1, &diag_mon, - &read_size); + false, &read_size); if (err) return err; @@ -225,17 +236,22 @@ int mlxsw_env_get_module_eeprom(struct net_device *netdev, int offset = ee->offset; unsigned int read_size; int i = 0; + bool qsfp; int err; if (!ee->len) return -EINVAL; memset(data, 0, ee->len); + /* Validate module identifier value. */ + err = mlxsw_env_validate_cable_ident(mlxsw_core, module, &qsfp); + if (err) + return err; while (i < ee->len) { err = mlxsw_env_query_module_eeprom(mlxsw_core, module, offset, ee->len - i, data + i, - &read_size); + qsfp, &read_size); if (err) { netdev_err(netdev, "Eeprom query failed\n"); return err; -- cgit v1.2.3 From 6391c63e61a76dfe4020432368cc2a7aa1273b41 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 14 Jun 2020 08:36:23 +0200 Subject: media: atomisp: reorganize the code under gmin_subdev_add() The gmin_subdev_add() currently doesn't use ACPI device power management. In order to prepare for adding support for it, let's shift some things, placing the PM-related stuff at the end of the probing logic. Let's also store the current gs on a temporary var, in order to simplify the source code. Tested-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- .../media/atomisp/pci/atomisp_gmin_platform.c | 119 +++++++++++---------- 1 file changed, 60 insertions(+), 59 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index cb360b8399e5..81d89d8c549a 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -447,6 +447,7 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) { struct i2c_client *power = NULL, *client = v4l2_get_subdevdata(subdev); struct acpi_device *adev; + struct gmin_subdev *gs; acpi_handle handle; struct device *dev; int i, ret, clock_num; @@ -457,16 +458,39 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) dev = &client->dev; handle = ACPI_HANDLE(dev); - - // FIXME: may need to release resources allocated by acpi_bus_get_device() - if (!handle || acpi_bus_get_device(handle, &adev)) { - dev_err(dev, "Error could not get ACPI device\n"); - return NULL; - } + adev = ACPI_COMPANION(&client->dev); dev_info(&client->dev, "%s: ACPI detected it on bus ID=%s, HID=%s\n", __func__, acpi_device_bid(adev), acpi_device_hid(adev)); + for (i = 0; i < MAX_SUBDEVS && gmin_subdevs[i].subdev; i++) + ; + if (i >= MAX_SUBDEVS) + return NULL; + + gs = &gmin_subdevs[i]; + gs->subdev = subdev; + + /*WA:CHT requires XTAL clock as PLL is not stable.*/ + gmin_subdevs[i].clock_src = gmin_get_var_int(dev, false, "ClkSrc", + VLV2_CLK_PLL_19P2MHZ); + + gs->csi_port = gmin_get_var_int(dev, false, "CsiPort", 0); + gs->csi_lanes = gmin_get_var_int(dev, false, "CsiLanes", 1); + + gs->gpio0 = gpiod_get_index(dev, NULL, 0, GPIOD_OUT_LOW); + if (IS_ERR(gs->gpio0)) + gs->gpio0 = NULL; + + gs->gpio1 = gpiod_get_index(dev, NULL, 1, GPIOD_OUT_LOW); + if (IS_ERR(gs->gpio1)) + gs->gpio1 = NULL; + + /* + * FIXME: the code below doesn't rely on ACPI device_pm.c code to + * set clocks and do power management. + */ + if (!pmic_id) { if (gmin_i2c_dev_exists(dev, PMIC_ACPI_TI, &power)) pmic_id = PMIC_TI; @@ -478,13 +502,8 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) pmic_id = PMIC_REGULATOR; } - for (i = 0; i < MAX_SUBDEVS && gmin_subdevs[i].subdev; i++) - ; - if (i >= MAX_SUBDEVS) - return NULL; - if (power) { - gmin_subdevs[i].pwm_i2c_addr = power->addr; + gs->pwm_i2c_addr = power->addr; dev_info(dev, "gmin: power management provided via %s (i2c addr 0x%02x)\n", pmic_name[pmic_id], power->addr); @@ -493,17 +512,7 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) pmic_name[pmic_id]); } - gmin_subdevs[i].subdev = subdev; - - /*WA:CHT requires XTAL clock as PLL is not stable.*/ - gmin_subdevs[i].clock_src = gmin_get_var_int(dev, false, "ClkSrc", - VLV2_CLK_PLL_19P2MHZ); - gmin_subdevs[i].csi_port = gmin_get_var_int(dev, false, "CsiPort", 0); - gmin_subdevs[i].csi_lanes = gmin_get_var_int(dev, false, "CsiLanes", 1); - /* - * FIXME: - * * According with : * https://github.com/projectceladon/hardware-intel-kernelflinger/blob/master/doc/fastboot.md * @@ -526,9 +535,9 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) snprintf(gmin_pmc_clk_name, sizeof(gmin_pmc_clk_name), "%s_%d", "pmc_plt_clk", clock_num); - gmin_subdevs[i].pmc_clk = devm_clk_get(dev, gmin_pmc_clk_name); - if (IS_ERR(gmin_subdevs[i].pmc_clk)) { - ret = PTR_ERR(gmin_subdevs[i].pmc_clk); + gs->pmc_clk = devm_clk_get(dev, gmin_pmc_clk_name); + if (IS_ERR(gs->pmc_clk)) { + ret = PTR_ERR(gs->pmc_clk); dev_err(dev, "Failed to get clk from %s : %d\n", @@ -549,25 +558,17 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) * to disable a clock that has not been enabled, * we need to enable the clock first. */ - ret = clk_prepare_enable(gmin_subdevs[i].pmc_clk); + ret = clk_prepare_enable(gs->pmc_clk); if (!ret) - clk_disable_unprepare(gmin_subdevs[i].pmc_clk); - - gmin_subdevs[i].gpio0 = gpiod_get_index(dev, NULL, 0, GPIOD_OUT_LOW); - if (IS_ERR(gmin_subdevs[i].gpio0)) - gmin_subdevs[i].gpio0 = NULL; - - gmin_subdevs[i].gpio1 = gpiod_get_index(dev, NULL, 1, GPIOD_OUT_LOW); - if (IS_ERR(gmin_subdevs[i].gpio1)) - gmin_subdevs[i].gpio1 = NULL; + clk_disable_unprepare(gs->pmc_clk); switch (pmic_id) { case PMIC_REGULATOR: - gmin_subdevs[i].v1p8_reg = regulator_get(dev, "V1P8SX"); - gmin_subdevs[i].v2p8_reg = regulator_get(dev, "V2P8SX"); + gs->v1p8_reg = regulator_get(dev, "V1P8SX"); + gs->v2p8_reg = regulator_get(dev, "V2P8SX"); - gmin_subdevs[i].v1p2_reg = regulator_get(dev, "V1P2A"); - gmin_subdevs[i].v2p8_vcm_reg = regulator_get(dev, "VPROG4B"); + gs->v1p2_reg = regulator_get(dev, "V1P2A"); + gs->v2p8_vcm_reg = regulator_get(dev, "VPROG4B"); /* Note: ideally we would initialize v[12]p8_on to the * output of regulator_is_enabled(), but sadly that @@ -579,32 +580,32 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) break; case PMIC_AXP: - gmin_subdevs[i].eldo1_1p8v = gmin_get_var_int(dev, false, - "eldo1_1p8v", - ELDO1_1P8V); - gmin_subdevs[i].eldo1_sel_reg = gmin_get_var_int(dev, false, - "eldo1_sel_reg", - ELDO1_SEL_REG); - gmin_subdevs[i].eldo1_ctrl_shift = gmin_get_var_int(dev, false, - "eldo1_ctrl_shift", - ELDO1_CTRL_SHIFT); - gmin_subdevs[i].eldo2_1p8v = gmin_get_var_int(dev, false, - "eldo2_1p8v", - ELDO2_1P8V); - gmin_subdevs[i].eldo2_sel_reg = gmin_get_var_int(dev, false, - "eldo2_sel_reg", - ELDO2_SEL_REG); - gmin_subdevs[i].eldo2_ctrl_shift = gmin_get_var_int(dev, false, - "eldo2_ctrl_shift", - ELDO2_CTRL_SHIFT); - gmin_subdevs[i].pwm_i2c_addr = power->addr; + gs->eldo1_1p8v = gmin_get_var_int(dev, false, + "eldo1_1p8v", + ELDO1_1P8V); + gs->eldo1_sel_reg = gmin_get_var_int(dev, false, + "eldo1_sel_reg", + ELDO1_SEL_REG); + gs->eldo1_ctrl_shift = gmin_get_var_int(dev, false, + "eldo1_ctrl_shift", + ELDO1_CTRL_SHIFT); + gs->eldo2_1p8v = gmin_get_var_int(dev, false, + "eldo2_1p8v", + ELDO2_1P8V); + gs->eldo2_sel_reg = gmin_get_var_int(dev, false, + "eldo2_sel_reg", + ELDO2_SEL_REG); + gs->eldo2_ctrl_shift = gmin_get_var_int(dev, false, + "eldo2_ctrl_shift", + ELDO2_CTRL_SHIFT); + gs->pwm_i2c_addr = power->addr; break; default: break; } - return &gmin_subdevs[i]; + return gs; } static struct gmin_subdev *find_gmin_subdev(struct v4l2_subdev *subdev) -- cgit v1.2.3 From d6697288d8c4b4174b77f29d302bd5f69354659b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 14 Jun 2020 09:02:01 +0200 Subject: media: atomisp: Prepare sensor support for ACPI PM Add support code for this driver to use ACPI power management. Yet, at least with known devices, this won't work without further changes. The rationale is that the ACPI handling code checks for the _PR? tables in order to know what is required to switch the device from power state D0 (_PR0) up to D3COLD (_PR3). The adev->flags.power_manageable is set to true if the device has a _PR0 table, which can be checked by calling acpi_device_power_manageable(adev). However, this only says that the device can be set to power off mode. At least on the DSDT tables we've seen so far, there's no _PR3 nor _PS3 (which would have a somewhat similar effect). So, using ACPI for power management won't work, except if adding an ACPI override logic somewhere. Tested-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- .../media/atomisp/pci/atomisp_gmin_platform.c | 89 ++++++++++++++++++++-- 1 file changed, 83 insertions(+), 6 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index 81d89d8c549a..3e8ec3ed5d24 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -65,7 +65,6 @@ enum clock_rate { struct gmin_subdev { struct v4l2_subdev *subdev; enum clock_rate clock_src; - bool clock_on; struct clk *pmc_clk; struct gpio_desc *gpio0; struct gpio_desc *gpio1; @@ -77,6 +76,8 @@ struct gmin_subdev { unsigned int csi_lanes; enum atomisp_input_format csi_fmt; enum atomisp_bayer_order csi_bayer; + + bool clock_on; bool v1p8_on; bool v2p8_on; bool v1p2_on; @@ -107,7 +108,7 @@ static enum { } pmic_id; static const char *pmic_name[] = { - [PMIC_UNSET] = "unset", + [PMIC_UNSET] = "ACPI device PM", [PMIC_REGULATOR] = "regulator driver", [PMIC_AXP] = "XPower AXP288 PMIC", [PMIC_TI] = "Dollar Cove TI PMIC", @@ -487,8 +488,39 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) gs->gpio1 = NULL; /* - * FIXME: the code below doesn't rely on ACPI device_pm.c code to - * set clocks and do power management. + * FIXME: + * + * The ACPI handling code checks for the _PR? tables in order to + * know what is required to switch the device from power state + * D0 (_PR0) up to D3COLD (_PR3). + * + * The adev->flags.power_manageable is set to true if the device + * has a _PR0 table, which can be checked by calling + * acpi_device_power_manageable(adev). + * + * However, this only says that the device can be set to power off + * mode. + * + * At least on the DSDT tables we've seen so far, there's no _PR3, + * nor _PS3 (which would have a somewhat similar effect). + * So, using ACPI for power management won't work, except if adding + * an ACPI override logic somewhere. + * + * So, at least for the existing devices we know, the check below + * will always be false. + */ + if (acpi_device_can_wakeup(adev) && + acpi_device_can_poweroff(adev)) { + dev_info(dev, + "gmin: power management provided via device PM\n"); + + return gs; + } + + /* + * The code below is here due to backward compatibility with devices + * whose ACPI BIOS may not contain everything that would be needed + * in order to set clocks and do power management. */ if (!pmic_id) { @@ -843,6 +875,37 @@ static int gmin_v2p8_ctrl(struct v4l2_subdev *subdev, int on) return -EINVAL; } +static int gmin_acpi_pm_ctrl(struct v4l2_subdev *subdev, int on) +{ + int ret = 0; + struct gmin_subdev *gs = find_gmin_subdev(subdev); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct acpi_device *adev = ACPI_COMPANION(&client->dev); + + /* Use the ACPI power management to control it */ + on = !!on; + if (gs->clock_on == on) + return 0; + + dev_dbg(subdev->dev, "Setting power state to %s\n", + on ? "on" : "off"); + + if (on) + ret = acpi_device_set_power(adev, + ACPI_STATE_D0); + else + ret = acpi_device_set_power(adev, + ACPI_STATE_D3_COLD); + + if (!ret) + gs->clock_on = on; + else + dev_err(subdev->dev, "Couldn't set power state to %s\n", + on ? "on" : "off"); + + return ret; +} + static int gmin_flisclk_ctrl(struct v4l2_subdev *subdev, int on) { int ret = 0; @@ -908,7 +971,7 @@ static struct camera_vcm_control *gmin_get_vcm_ctrl(struct v4l2_subdev *subdev, return NULL; } -static struct camera_sensor_platform_data gmin_plat = { +static struct camera_sensor_platform_data pmic_gmin_plat = { .gpio0_ctrl = gmin_gpio0_ctrl, .gpio1_ctrl = gmin_gpio1_ctrl, .v1p8_ctrl = gmin_v1p8_ctrl, @@ -919,6 +982,17 @@ static struct camera_sensor_platform_data gmin_plat = { .get_vcm_ctrl = gmin_get_vcm_ctrl, }; +static struct camera_sensor_platform_data acpi_gmin_plat = { + .gpio0_ctrl = gmin_gpio0_ctrl, + .gpio1_ctrl = gmin_gpio1_ctrl, + .v1p8_ctrl = gmin_acpi_pm_ctrl, + .v2p8_ctrl = gmin_acpi_pm_ctrl, + .v1p2_ctrl = gmin_acpi_pm_ctrl, + .flisclk_ctrl = gmin_acpi_pm_ctrl, + .csi_cfg = gmin_csi_cfg, + .get_vcm_ctrl = gmin_get_vcm_ctrl, +}; + struct camera_sensor_platform_data *gmin_camera_platform_data( struct v4l2_subdev *subdev, enum atomisp_input_format csi_format, @@ -929,7 +1003,10 @@ struct camera_sensor_platform_data *gmin_camera_platform_data( gs->csi_fmt = csi_format; gs->csi_bayer = csi_bayer; - return &gmin_plat; + if (gs->pmc_clk) + return &pmic_gmin_plat; + else + return &acpi_gmin_plat; } EXPORT_SYMBOL_GPL(gmin_camera_platform_data); -- cgit v1.2.3 From e2c57942382dd1ace16b90c73febdd31666f2ad3 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 20 Jun 2020 12:25:10 +0200 Subject: media: atomisp: properly parse CLK PMIC on newer devices Newer devices don't place the PMIC CLK line inside an EFI var. Instead, those are found at the _PR0 table. Add a parser for it, using info stored via the DSDT table. Tested-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- .../media/atomisp/pci/atomisp_gmin_platform.c | 66 +++++++++++++++++++++- 1 file changed, 64 insertions(+), 2 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index 3e8ec3ed5d24..39e585faf0c5 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -444,6 +444,61 @@ static int gmin_i2c_write(struct device *dev, u16 i2c_addr, u8 reg, return ret; } +static int atomisp_get_acpi_power(struct device *dev, acpi_handle handle) +{ + char name[5]; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_buffer b_name = { sizeof(name), name }; + union acpi_object *package, *element; + acpi_handle rhandle; + acpi_status status; + int clock_num = -1; + int i; + + status = acpi_evaluate_object(handle, "_PR0", NULL, &buffer); + if (!ACPI_SUCCESS(status)) + return -1; + + package = buffer.pointer; + + if (!buffer.length || !package + || package->type != ACPI_TYPE_PACKAGE + || !package->package.count) + goto fail; + + for (i = 0; i < package->package.count; i++) { + element = &package->package.elements[i]; + + if (element->type != ACPI_TYPE_LOCAL_REFERENCE) + continue; + + rhandle = element->reference.handle; + if (!rhandle) + goto fail; + + acpi_get_name(rhandle, ACPI_SINGLE_NAME, &b_name); + + dev_dbg(dev, "Found PM resource '%s'\n", name); + if (strlen(name) == 4 && !strncmp(name, "CLK", 3)) { + if (name[3] >= '0' && name[3] <= '4') + clock_num = name[3] - '0'; +#if 0 + /* + * We could abort here, but let's parse all resources, + * as this is helpful for debugging purposes + */ + if (clock_num >= 0) + break; +#endif + } + } + +fail: + ACPI_FREE(buffer.pointer); + + return clock_num; +} + static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) { struct i2c_client *power = NULL, *client = v4l2_get_subdevdata(subdev); @@ -451,7 +506,7 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) struct gmin_subdev *gs; acpi_handle handle; struct device *dev; - int i, ret, clock_num; + int i, ret, clock_num = -1; if (!client) return NULL; @@ -557,7 +612,14 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) * is a power resource already, falling back to the EFI vars detection * otherwise. */ - clock_num = gmin_get_var_int(dev, false, "CamClk", -1); + + /* Try first to use ACPI to get the clock resource */ + if (acpi_device_power_manageable(adev)) + clock_num = atomisp_get_acpi_power(dev, handle); + + /* Fall-back use EFI and/or DMI match */ + if (clock_num < 0) + clock_num = gmin_get_var_int(dev, false, "CamClk", 0); if (clock_num < 0 || clock_num > MAX_CLK_COUNT) { dev_err(dev, "Invalid clock number\n"); -- cgit v1.2.3 From d6ad1c9bbadd83889080350489bc63f7ff9207f0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 21 Jun 2020 08:32:27 +0200 Subject: media: atomisp: fix call to g_frame_interval The media core has now a check if fi->pad is bigger than zero or bigger than sd->entity.num_pads, if the media controller is defined. This causes a call to g_frame_interval to return -EINVAL. Fix it by first cleaning up the struct. Tested-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_cmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c index 7b936e5a5f03..388b57455204 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c +++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c @@ -109,7 +109,7 @@ struct atomisp_acc_pipe *atomisp_to_acc_pipe(struct video_device *dev) static unsigned short atomisp_get_sensor_fps(struct atomisp_sub_device *asd) { - struct v4l2_subdev_frame_interval fi; + struct v4l2_subdev_frame_interval fi = { 0 }; struct atomisp_device *isp = asd->isp; unsigned short fps = 0; -- cgit v1.2.3 From 1153cb48d657388d27752fecdc1bc53432942882 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 21 Jun 2020 09:07:24 +0200 Subject: media: atomisp: print info if gpio0 and gpio2 were detected If the ACPI DSDT tables provide _CRS for the camera, the GPIO core code should be able to handle them automatically. Tested-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index 39e585faf0c5..7babf191b25d 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -537,10 +537,14 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) gs->gpio0 = gpiod_get_index(dev, NULL, 0, GPIOD_OUT_LOW); if (IS_ERR(gs->gpio0)) gs->gpio0 = NULL; + else + dev_info(dev, "will handle gpio0 via ACPI\n"); gs->gpio1 = gpiod_get_index(dev, NULL, 1, GPIOD_OUT_LOW); if (IS_ERR(gs->gpio1)) gs->gpio1 = NULL; + else + dev_info(dev, "will handle gpio1 via ACPI\n"); /* * FIXME: -- cgit v1.2.3 From 2b5b3221060cf7a694188929b362d7a6e41af928 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 21 Jun 2020 09:42:47 +0200 Subject: media: atomisp: split add from find subdev There's only one place where a subdev can be added: when the sensor driver registers it. Trying to do it elsewhere will cause problems, as the detection code needs to access the I2C bus in order to probe some things. Tested-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index 7babf191b25d..0562eb15ae82 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -202,6 +202,8 @@ int atomisp_register_i2c_module(struct v4l2_subdev *subdev, * gmin_subdev struct is already initialized for us. */ gs = find_gmin_subdev(subdev); + if (!gs) + return -ENODEV; pdata.subdevs[i].type = type; pdata.subdevs[i].port = gs->csi_port; @@ -713,7 +715,7 @@ static struct gmin_subdev *find_gmin_subdev(struct v4l2_subdev *subdev) for (i = 0; i < MAX_SUBDEVS; i++) if (gmin_subdevs[i].subdev == subdev) return &gmin_subdevs[i]; - return gmin_subdev_add(subdev); + return NULL; } static int axp_regulator_set(struct device *dev, struct gmin_subdev *gs, @@ -1064,7 +1066,7 @@ struct camera_sensor_platform_data *gmin_camera_platform_data( enum atomisp_input_format csi_format, enum atomisp_bayer_order csi_bayer) { - struct gmin_subdev *gs = find_gmin_subdev(subdev); + struct gmin_subdev *gs = gmin_subdev_add(subdev); gs->csi_fmt = csi_format; gs->csi_bayer = csi_bayer; -- cgit v1.2.3 From 79317baaaea22b2b7d8bdfc1e0718f6579da88ac Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 21 Jun 2020 10:04:16 +0200 Subject: media: atomisp: place all gpio parsing together Instead of parsing GPIO for two exceptions inside the logic which would be trying to use the GPIO, move the init code to the routine which adds a new gmin device. Move the notes to it too, as this helps to identify where those two GPIO settings are used, explaining why they're defaulting to -1 when not found. Tested-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- .../media/atomisp/pci/atomisp_gmin_platform.c | 86 ++++++++++------------ 1 file changed, 40 insertions(+), 46 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index 0562eb15ae82..eb96377da1ee 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -83,6 +83,9 @@ struct gmin_subdev { bool v1p2_on; bool v2p8_vcm_on; + int v1p8_gpio; + int v2p8_gpio; + u8 pwm_i2c_addr; /* For PMIC AXP */ @@ -122,24 +125,6 @@ static const struct atomisp_platform_data pdata = { .subdevs = pdata_subdevs, }; -/* - * Something of a hack. The ECS E7 board drives camera 2.8v from an - * external regulator instead of the PMIC. There's a gmin_CamV2P8 - * config variable that specifies the GPIO to handle this particular - * case, but this needs a broader architecture for handling camera - * power. - */ -enum { V2P8_GPIO_UNSET = -2, V2P8_GPIO_NONE = -1 }; -static int v2p8_gpio = V2P8_GPIO_UNSET; - -/* - * Something of a hack. The CHT RVP board drives camera 1.8v from an - * external regulator instead of the PMIC just like ECS E7 board, see the - * comments above. - */ -enum { V1P8_GPIO_UNSET = -2, V1P8_GPIO_NONE = -1 }; -static int v1p8_gpio = V1P8_GPIO_UNSET; - static LIST_HEAD(vcm_devices); static DEFINE_MUTEX(vcm_lock); @@ -548,6 +533,23 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) else dev_info(dev, "will handle gpio1 via ACPI\n"); + /* + * Those are used only when there is an external regulator apart + * from the PMIC that would be providing power supply, like on the + * two cases below: + * + * The ECS E7 board drives camera 2.8v from an external regulator + * instead of the PMIC. There's a gmin_CamV2P8 config variable + * that specifies the GPIO to handle this particular case, + * but this needs a broader architecture for handling camera power. + * + * The CHT RVP board drives camera 1.8v from an* external regulator + * instead of the PMIC just like ECS E7 board. + */ + + gs->v1p8_gpio = gmin_get_var_int(dev, true, "V1P8GPIO", -1); + gs->v2p8_gpio = gmin_get_var_int(dev, true, "V2P8GPIO", -1); + /* * FIXME: * @@ -830,26 +832,22 @@ static int gmin_v1p8_ctrl(struct v4l2_subdev *subdev, int on) dev = &client->dev; - if (v1p8_gpio == V1P8_GPIO_UNSET) { - v1p8_gpio = gmin_get_var_int(dev, true, - "V1P8GPIO", V1P8_GPIO_NONE); - if (v1p8_gpio != V1P8_GPIO_NONE) { - pr_info("atomisp_gmin_platform: 1.8v power on GPIO %d\n", - v1p8_gpio); - ret = gpio_request(v1p8_gpio, "camera_v1p8_en"); - if (!ret) - ret = gpio_direction_output(v1p8_gpio, 0); - if (ret) - pr_err("V1P8 GPIO initialization failed\n"); - } + if (gs->v1p8_gpio >= 0) { + pr_info("atomisp_gmin_platform: 1.8v power on GPIO %d\n", + gs->v1p8_gpio); + ret = gpio_request(gs->v1p8_gpio, "camera_v1p8_en"); + if (!ret) + ret = gpio_direction_output(gs->v1p8_gpio, 0); + if (ret) + pr_err("V1P8 GPIO initialization failed\n"); } if (!gs || gs->v1p8_on == on) return 0; gs->v1p8_on = on; - if (v1p8_gpio >= 0) - gpio_set_value(v1p8_gpio, on); + if (gs->v1p8_gpio >= 0) + gpio_set_value(gs->v1p8_gpio, on); if (gs->v1p8_reg) { regulator_set_voltage(gs->v1p8_reg, 1800000, 1800000); @@ -892,26 +890,22 @@ static int gmin_v2p8_ctrl(struct v4l2_subdev *subdev, int on) dev = &client->dev; - if (v2p8_gpio == V2P8_GPIO_UNSET) { - v2p8_gpio = gmin_get_var_int(dev, true, - "V2P8GPIO", V2P8_GPIO_NONE); - if (v2p8_gpio != V2P8_GPIO_NONE) { - pr_info("atomisp_gmin_platform: 2.8v power on GPIO %d\n", - v2p8_gpio); - ret = gpio_request(v2p8_gpio, "camera_v2p8"); - if (!ret) - ret = gpio_direction_output(v2p8_gpio, 0); - if (ret) - pr_err("V2P8 GPIO initialization failed\n"); - } + if (gs->v2p8_gpio >= 0) { + pr_info("atomisp_gmin_platform: 2.8v power on GPIO %d\n", + gs->v2p8_gpio); + ret = gpio_request(gs->v2p8_gpio, "camera_v2p8"); + if (!ret) + ret = gpio_direction_output(gs->v2p8_gpio, 0); + if (ret) + pr_err("V2P8 GPIO initialization failed\n"); } if (!gs || gs->v2p8_on == on) return 0; gs->v2p8_on = on; - if (v2p8_gpio >= 0) - gpio_set_value(v2p8_gpio, on); + if (gs->v2p8_gpio >= 0) + gpio_set_value(gs->v2p8_gpio, on); if (gs->v2p8_reg) { regulator_set_voltage(gs->v2p8_reg, 2900000, 2900000); -- cgit v1.2.3 From e651cc385a2b4b5f361468f6fe11e6199fe2ae5f Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 26 Jun 2020 14:19:11 +0200 Subject: media: atomisp: Replace last use of Intel MID APIs Intel MID special header is not in use in this driver. Replace it with a better macro for now on. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/include/linux/atomisp_platform.h | 1 + drivers/staging/media/atomisp/pci/atomisp_compat_css20.c | 5 +---- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/staging/media/atomisp/include/linux/atomisp_platform.h b/drivers/staging/media/atomisp/include/linux/atomisp_platform.h index 873344a02ccf..5a5121d958ed 100644 --- a/drivers/staging/media/atomisp/include/linux/atomisp_platform.h +++ b/drivers/staging/media/atomisp/include/linux/atomisp_platform.h @@ -250,6 +250,7 @@ const struct atomisp_camera_caps *atomisp_get_default_camera_caps(void); #define IS_MFLD __IS_SOC(INTEL_FAM6_ATOM_SALTWELL_MID) #define IS_BYT __IS_SOC(INTEL_FAM6_ATOM_SILVERMONT) #define IS_CHT __IS_SOC(INTEL_FAM6_ATOM_AIRMONT) +#define IS_MRFD __IS_SOC(INTEL_FAM6_ATOM_SILVERMONT_MID) #define IS_MOFD __IS_SOC(INTEL_FAM6_ATOM_AIRMONT_MID) /* Both CHT and MOFD come with ISP2401 */ diff --git a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c index c1e282a974d0..df352be06474 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c +++ b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c @@ -33,8 +33,6 @@ #include "atomisp_ioctl.h" #include "atomisp_acc.h" -#include - #include "ia_css_debug.h" #include "ia_css_isp_param.h" #include "sh_css_hrt.h" @@ -1966,8 +1964,7 @@ void atomisp_css_input_set_mode(struct atomisp_sub_device *asd, true, 0x13000, &size_mem_words) != 0) { - if (intel_mid_identify_cpu() == - INTEL_MID_CPU_CHIP_TANGIER) + if (IS_MRFD) size_mem_words = CSS_MIPI_FRAME_BUFFER_SIZE_2; else size_mem_words = CSS_MIPI_FRAME_BUFFER_SIZE_1; -- cgit v1.2.3 From 5f55dd54994a596ce3bdb9e2a73164907ca46c03 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 26 Jun 2020 14:19:12 +0200 Subject: media: atomisp: move CCK endpoint address to generic header IOSF MBI header contains a lot of definitions, such as end point addresses of IPs. Move CCK address from AtomISP driver to generic header. While here, drop unused one. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- arch/x86/include/asm/iosf_mbi.h | 1 + drivers/staging/media/atomisp/pci/atomisp-regs.h | 3 --- drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 2 +- 3 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/x86/include/asm/iosf_mbi.h b/arch/x86/include/asm/iosf_mbi.h index 5270ff39b9af..a1911fea8739 100644 --- a/arch/x86/include/asm/iosf_mbi.h +++ b/arch/x86/include/asm/iosf_mbi.h @@ -39,6 +39,7 @@ #define BT_MBI_UNIT_PMC 0x04 #define BT_MBI_UNIT_GFX 0x06 #define BT_MBI_UNIT_SMI 0x0C +#define BT_MBI_UNIT_CCK 0x14 #define BT_MBI_UNIT_USB 0x43 #define BT_MBI_UNIT_SATA 0xA3 #define BT_MBI_UNIT_PCIE 0xA6 diff --git a/drivers/staging/media/atomisp/pci/atomisp-regs.h b/drivers/staging/media/atomisp/pci/atomisp-regs.h index de34ee28e390..022997f47121 100644 --- a/drivers/staging/media/atomisp/pci/atomisp-regs.h +++ b/drivers/staging/media/atomisp/pci/atomisp-regs.h @@ -20,9 +20,6 @@ #define ATOMISP_REGS_H /* common register definitions */ -#define PUNIT_PORT 0x04 -#define CCK_PORT 0x14 - #define PCICMDSTS 0x01 #define INTR 0x0f #define MSI_CAPID 0x24 diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c index 29ea66f175c8..3bd78d870264 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c @@ -1687,7 +1687,7 @@ static int atomisp_pci_probe(struct pci_dev *dev, isp->dfs = &dfs_config_cht; isp->pdev->d3cold_delay = 0; - iosf_mbi_read(CCK_PORT, MBI_REG_READ, CCK_FUSE_REG_0, &val); + iosf_mbi_read(BT_MBI_UNIT_CCK, MBI_REG_READ, CCK_FUSE_REG_0, &val); switch (val & CCK_FUSE_HPLL_FREQ_MASK) { case 0x00: isp->hpll_freq = HPLL_FREQ_800MHZ; -- cgit v1.2.3 From 4f307131f376e92fc038677a655a495dcb1d8ada Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 26 Jun 2020 14:19:13 +0200 Subject: media: atomisp: Use proper APIs to find I²C client device by ACPI HID MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are specific ACPI and I\xB2C APIs to match device by different parameters, such as ACPI HID, and retrieve an I\xB2C client. Use them instead of home grown approach. Note, it fixes a resource leak as well. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- .../media/atomisp/pci/atomisp_gmin_platform.c | 43 +++++++++------------- 1 file changed, 18 insertions(+), 25 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index eb96377da1ee..d52040030e35 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -96,9 +96,9 @@ struct gmin_subdev { static struct gmin_subdev gmin_subdevs[MAX_SUBDEVS]; /* ACPI HIDs for the PMICs that could be used by this driver */ -#define PMIC_ACPI_AXP "INT33F4:00" /* XPower AXP288 PMIC */ -#define PMIC_ACPI_TI "INT33F5:00" /* Dollar Cove TI PMIC */ -#define PMIC_ACPI_CRYSTALCOVE "INT33FD:00" /* Crystal Cove PMIC */ +#define PMIC_ACPI_AXP "INT33F4" /* XPower AXP288 PMIC */ +#define PMIC_ACPI_TI "INT33F5" /* Dollar Cove TI PMIC */ +#define PMIC_ACPI_CRYSTALCOVE "INT33FD" /* Crystal Cove PMIC */ #define PMIC_PLATFORM_TI "intel_soc_pmic_chtdc_ti" @@ -371,34 +371,27 @@ static const guid_t atomisp_dsm_guid = GUID_INIT(0xdc2f6c4f, 0x045b, 0x4f1d, #define GMIN_PMC_CLK_NAME 14 /* "pmc_plt_clk_[0..5]" */ static char gmin_pmc_clk_name[GMIN_PMC_CLK_NAME]; -static int gmin_i2c_match_one(struct device *dev, const void *data) -{ - const char *name = data; - struct i2c_client *client; - - if (dev->type != &i2c_client_type) - return 0; - - client = to_i2c_client(dev); - - return (!strcmp(name, client->name)); -} - static struct i2c_client *gmin_i2c_dev_exists(struct device *dev, char *name, struct i2c_client **client) { + struct acpi_device *adev; struct device *d; - while ((d = bus_find_device(&i2c_bus_type, NULL, name, - gmin_i2c_match_one))) { - *client = to_i2c_client(d); - dev_dbg(dev, "found '%s' at address 0x%02x, adapter %d\n", - (*client)->name, (*client)->addr, - (*client)->adapter->nr); - return *client; - } + adev = acpi_dev_get_first_match_dev(name, NULL, -1); + if (!adev) + return NULL; - return NULL; + d = bus_find_device_by_acpi_dev(&i2c_bus_type, adev); + acpi_dev_put(adev); + if (!d) + return NULL; + + *client = i2c_verify_client(d); + put_device(d); + + dev_dbg(dev, "found '%s' at address 0x%02x, adapter %d\n", + (*client)->name, (*client)->addr, (*client)->adapter->nr); + return *client; } static int gmin_i2c_write(struct device *dev, u16 i2c_addr, u8 reg, -- cgit v1.2.3 From 0697fd92e7f1fc2b0783491e3fd40d5a7e77d011 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 26 Jun 2020 14:19:14 +0200 Subject: media: atomisp: don't pass struct device_driver as parameter There is no need to pass a pointer to struct device_driver when we have an access to struct device already. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_drvfs.c | 3 ++- drivers/staging/media/atomisp/pci/atomisp_drvfs.h | 2 +- drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_drvfs.c b/drivers/staging/media/atomisp/pci/atomisp_drvfs.c index fe0e2bfde27f..3711df111fbf 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_drvfs.c +++ b/drivers/staging/media/atomisp/pci/atomisp_drvfs.c @@ -185,8 +185,9 @@ static void iunit_drvfs_remove_files(struct device_driver *drv) driver_remove_file(drv, &iunit_drvfs_attrs[i]); } -int atomisp_drvfs_init(struct device_driver *drv, struct atomisp_device *isp) +int atomisp_drvfs_init(struct atomisp_device *isp) { + struct device_driver *drv = isp->dev->driver; int ret; iunit_debug.isp = isp; diff --git a/drivers/staging/media/atomisp/pci/atomisp_drvfs.h b/drivers/staging/media/atomisp/pci/atomisp_drvfs.h index 4911037231fb..8f4cc722b881 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_drvfs.h +++ b/drivers/staging/media/atomisp/pci/atomisp_drvfs.h @@ -19,7 +19,7 @@ #ifndef __ATOMISP_DRVFS_H__ #define __ATOMISP_DRVFS_H__ -int atomisp_drvfs_init(struct device_driver *drv, struct atomisp_device *isp); +int atomisp_drvfs_init(struct atomisp_device *isp); void atomisp_drvfs_exit(void); #endif /* __ATOMISP_DRVFS_H__ */ diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c index 3bd78d870264..9214c6853344 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c @@ -1840,7 +1840,7 @@ static int atomisp_pci_probe(struct pci_dev *dev, isp->firmware = NULL; isp->css_env.isp_css_fw.data = NULL; - atomisp_drvfs_init(&dev->driver->driver, isp); + atomisp_drvfs_init(isp); return 0; -- cgit v1.2.3 From 1cfc8593f42085b469fe167eec615527a84fe793 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 26 Jun 2020 14:19:15 +0200 Subject: media: atomisp: Get rid of struct pci_dev in struct atomisp_device struct atomisp device has struct device and struct pci_dev pointers which are basically duplicates of each other. Drop the latter in favour of the former. While here, unify pdev to be pointer to struct pci_device and reindent some (touched) lines for better readability. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_cmd.c | 24 ++++++++++------ drivers/staging/media/atomisp/pci/atomisp_cmd.h | 4 +-- .../staging/media/atomisp/pci/atomisp_internal.h | 1 - drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 19 ++++++------- drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 33 +++++++++++----------- 5 files changed, 43 insertions(+), 38 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c index 388b57455204..7a278740d084 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c +++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c @@ -206,6 +206,7 @@ int atomisp_freq_scaling(struct atomisp_device *isp, enum atomisp_dfs_mode mode, bool force) { + struct pci_dev *pdev = to_pci_dev(isp->dev); /* FIXME! Only use subdev[0] status yet */ struct atomisp_sub_device *asd = &isp->asd[0]; const struct atomisp_dfs_config *dfs; @@ -219,7 +220,7 @@ int atomisp_freq_scaling(struct atomisp_device *isp, return -EINVAL; } - if ((isp->pdev->device & ATOMISP_PCI_DEVICE_SOC_MASK) == + if ((pdev->device & ATOMISP_PCI_DEVICE_SOC_MASK) == ATOMISP_PCI_DEVICE_SOC_CHT && ATOMISP_USE_YUVPP(asd)) isp->dfs = &dfs_config_cht_soc; @@ -357,8 +358,9 @@ static void clear_isp_irq(enum hrt_isp_css_irq irq) irq_clear_all(IRQ0_ID); } -void atomisp_msi_irq_init(struct atomisp_device *isp, struct pci_dev *dev) +void atomisp_msi_irq_init(struct atomisp_device *isp) { + struct pci_dev *dev = to_pci_dev(isp->dev); u32 msg32; u16 msg16; @@ -375,8 +377,9 @@ void atomisp_msi_irq_init(struct atomisp_device *isp, struct pci_dev *dev) pci_write_config_word(dev, PCI_COMMAND, msg16); } -void atomisp_msi_irq_uninit(struct atomisp_device *isp, struct pci_dev *dev) +void atomisp_msi_irq_uninit(struct atomisp_device *isp) { + struct pci_dev *dev = to_pci_dev(isp->dev); u32 msg32; u16 msg16; @@ -480,11 +483,12 @@ static void print_csi_rx_errors(enum mipi_port_id port, /* Clear irq reg */ static void clear_irq_reg(struct atomisp_device *isp) { + struct pci_dev *pdev = to_pci_dev(isp->dev); u32 msg_ret; - pci_read_config_dword(isp->pdev, PCI_INTERRUPT_CTRL, &msg_ret); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &msg_ret); msg_ret |= 1 << INTR_IIR; - pci_write_config_dword(isp->pdev, PCI_INTERRUPT_CTRL, msg_ret); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, msg_ret); } static struct atomisp_sub_device * @@ -1289,6 +1293,7 @@ void atomisp_delayed_init_work(struct work_struct *work) static void __atomisp_css_recover(struct atomisp_device *isp, bool isp_timeout) { + struct pci_dev *pdev = to_pci_dev(isp->dev); enum ia_css_pipe_id css_pipe_id; bool stream_restart[MAX_STREAM_NUM] = {0}; bool depth_mode = false; @@ -1372,8 +1377,8 @@ static void __atomisp_css_recover(struct atomisp_device *isp, bool isp_timeout) clear_isp_irq(hrt_isp_css_irq_sp); /* Set the SRSE to 3 before resetting */ - pci_write_config_dword(isp->pdev, PCI_I_CONTROL, isp->saved_regs.i_control | - MRFLD_PCI_I_CONTROL_SRSE_RESET_MASK); + pci_write_config_dword(pdev, PCI_I_CONTROL, + isp->saved_regs.i_control | MRFLD_PCI_I_CONTROL_SRSE_RESET_MASK); /* reset ISP and restore its state */ isp->isp_timeout = true; @@ -6158,6 +6163,7 @@ out: /*Turn off ISP dphy */ int atomisp_ospm_dphy_down(struct atomisp_device *isp) { + struct pci_dev *pdev = to_pci_dev(isp->dev); unsigned long flags; u32 reg; @@ -6179,9 +6185,9 @@ done: * MRFLD HW design need all CSI ports are disabled before * powering down the IUNIT. */ - pci_read_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, ®); + pci_read_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, ®); reg |= MRFLD_ALL_CSI_PORTS_OFF_MASK; - pci_write_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, reg); + pci_write_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, reg); return 0; } diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.h b/drivers/staging/media/atomisp/pci/atomisp_cmd.h index 0bde995f1a8d..1c0d464c2ac1 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_cmd.h +++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.h @@ -68,8 +68,8 @@ bool atomisp_buffers_queued_pipe(struct atomisp_video_pipe *pipe); /* * Interrupt functions */ -void atomisp_msi_irq_init(struct atomisp_device *isp, struct pci_dev *dev); -void atomisp_msi_irq_uninit(struct atomisp_device *isp, struct pci_dev *dev); +void atomisp_msi_irq_init(struct atomisp_device *isp); +void atomisp_msi_irq_uninit(struct atomisp_device *isp); void atomisp_wdt_work(struct work_struct *work); void atomisp_wdt(struct timer_list *t); void atomisp_setup_flash(struct atomisp_sub_device *asd); diff --git a/drivers/staging/media/atomisp/pci/atomisp_internal.h b/drivers/staging/media/atomisp/pci/atomisp_internal.h index ff3becd41110..5af9bbce6284 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_internal.h +++ b/drivers/staging/media/atomisp/pci/atomisp_internal.h @@ -216,7 +216,6 @@ struct atomisp_sw_contex { * ci device struct */ struct atomisp_device { - struct pci_dev *pdev; struct device *dev; struct v4l2_device v4l2_dev; struct media_device media_dev; diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c index 9404a678fa6f..f8d616f08b51 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c +++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c @@ -549,8 +549,7 @@ static int atomisp_querycap(struct file *file, void *fh, strscpy(cap->driver, DRIVER, sizeof(cap->driver)); strscpy(cap->card, CARD, sizeof(cap->card)); - snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", - pci_name(isp->pdev)); + snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", dev_name(isp->dev)); return 0; } @@ -1635,6 +1634,7 @@ static int atomisp_streamon(struct file *file, void *fh, struct atomisp_video_pipe *pipe = atomisp_to_video_pipe(vdev); struct atomisp_sub_device *asd = pipe->asd; struct atomisp_device *isp = video_get_drvdata(vdev); + struct pci_dev *pdev = to_pci_dev(isp->dev); enum ia_css_pipe_id css_pipe_id; unsigned int sensor_start_stream; unsigned int wdt_duration = ATOMISP_ISP_TIMEOUT_DURATION; @@ -1844,9 +1844,8 @@ start_sensor: /* Enable the CSI interface on ANN B0/K0 */ if (isp->media_dev.hw_revision >= ((ATOMISP_HW_REVISION_ISP2401 << ATOMISP_HW_REVISION_SHIFT) | ATOMISP_HW_STEPPING_B0)) { - pci_write_config_word(isp->pdev, MRFLD_PCI_CSI_CONTROL, - isp->saved_regs.csi_control | - MRFLD_PCI_CSI_CONTROL_CSI_READY); + pci_write_config_word(pdev, MRFLD_PCI_CSI_CONTROL, + isp->saved_regs.csi_control | MRFLD_PCI_CSI_CONTROL_CSI_READY); } /* stream on the sensor */ @@ -1891,6 +1890,7 @@ int __atomisp_streamoff(struct file *file, void *fh, enum v4l2_buf_type type) { struct video_device *vdev = video_devdata(file); struct atomisp_device *isp = video_get_drvdata(vdev); + struct pci_dev *pdev = to_pci_dev(isp->dev); struct atomisp_video_pipe *pipe = atomisp_to_video_pipe(vdev); struct atomisp_sub_device *asd = pipe->asd; struct atomisp_video_pipe *capture_pipe = NULL; @@ -2076,9 +2076,8 @@ stopsensor: /* Disable the CSI interface on ANN B0/K0 */ if (isp->media_dev.hw_revision >= ((ATOMISP_HW_REVISION_ISP2401 << ATOMISP_HW_REVISION_SHIFT) | ATOMISP_HW_STEPPING_B0)) { - pci_write_config_word(isp->pdev, MRFLD_PCI_CSI_CONTROL, - isp->saved_regs.csi_control & - ~MRFLD_PCI_CSI_CONTROL_CSI_READY); + pci_write_config_word(pdev, MRFLD_PCI_CSI_CONTROL, + isp->saved_regs.csi_control & ~MRFLD_PCI_CSI_CONTROL_CSI_READY); } if (atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_LOW, false)) @@ -2111,8 +2110,8 @@ stopsensor: } /* disable PUNIT/ISP acknowlede/handshake - SRSE=3 */ - pci_write_config_dword(isp->pdev, PCI_I_CONTROL, isp->saved_regs.i_control | - MRFLD_PCI_I_CONTROL_SRSE_RESET_MASK); + pci_write_config_dword(pdev, PCI_I_CONTROL, + isp->saved_regs.i_control | MRFLD_PCI_I_CONTROL_SRSE_RESET_MASK); dev_err(isp->dev, "atomisp_reset"); atomisp_reset(isp); for (i = 0; i < isp->num_of_streams; i++) { diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c index 9214c6853344..126c1bc75baa 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c @@ -512,7 +512,7 @@ void atomisp_acc_unregister(struct atomisp_acc_pipe *video) static int atomisp_save_iunit_reg(struct atomisp_device *isp) { - struct pci_dev *dev = isp->pdev; + struct pci_dev *dev = to_pci_dev(isp->dev); dev_dbg(isp->dev, "%s\n", __func__); @@ -573,7 +573,7 @@ static int atomisp_save_iunit_reg(struct atomisp_device *isp) static int __maybe_unused atomisp_restore_iunit_reg(struct atomisp_device *isp) { - struct pci_dev *dev = isp->pdev; + struct pci_dev *dev = to_pci_dev(isp->dev); dev_dbg(isp->dev, "%s\n", __func__); @@ -619,7 +619,7 @@ static int __maybe_unused atomisp_restore_iunit_reg(struct atomisp_device *isp) static int atomisp_mrfld_pre_power_down(struct atomisp_device *isp) { - struct pci_dev *dev = isp->pdev; + struct pci_dev *dev = to_pci_dev(isp->dev); u32 irq; unsigned long flags; @@ -679,7 +679,7 @@ done: irq &= ~(1 << INTR_IER); pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); - atomisp_msi_irq_uninit(isp, dev); + atomisp_msi_irq_uninit(isp); atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_LOW, true); spin_unlock_irqrestore(&isp->lock, flags); @@ -904,6 +904,7 @@ static int __maybe_unused atomisp_resume(struct device *dev) int atomisp_csi_lane_config(struct atomisp_device *isp) { + struct pci_dev *pdev = to_pci_dev(isp->dev); static const struct { u8 code; u8 lanes[MRFLD_PORT_NUM]; @@ -1005,7 +1006,7 @@ int atomisp_csi_lane_config(struct atomisp_device *isp) return -EINVAL; } - pci_read_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, &csi_control); + pci_read_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, &csi_control); csi_control &= ~port_config_mask; csi_control |= (portconfigs[i].code << MRFLD_PORT_CONFIGCODE_SHIFT) | (portconfigs[i].lanes[0] ? 0 : (1 << MRFLD_PORT1_ENABLE_SHIFT)) @@ -1015,7 +1016,7 @@ int atomisp_csi_lane_config(struct atomisp_device *isp) | (((1 << portconfigs[i].lanes[1]) - 1) << MRFLD_PORT2_LANES_SHIFT) | (((1 << portconfigs[i].lanes[2]) - 1) << port3_lanes_shift); - pci_write_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, csi_control); + pci_write_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, csi_control); dev_dbg(isp->dev, "%s: the portconfig is %d-%d-%d, CSI_CONTROL is 0x%08X\n", @@ -1589,7 +1590,7 @@ static int atomisp_pci_probe(struct pci_dev *dev, err = -ENOMEM; goto atomisp_dev_alloc_fail; } - isp->pdev = dev; + isp->dev = &dev->dev; isp->sw_contex.power_state = ATOM_ISP_POWER_UP; isp->saved_regs.ispmmadr = start; @@ -1599,7 +1600,7 @@ static int atomisp_pci_probe(struct pci_dev *dev, spin_lock_init(&isp->lock); /* This is not a true PCI device on SoC, so the delay is not needed. */ - isp->pdev->d3_delay = 0; + dev->d3_delay = 0; switch (id->device & ATOMISP_PCI_DEVICE_SOC_MASK) { case ATOMISP_PCI_DEVICE_SOC_MRFLD: @@ -1658,7 +1659,7 @@ static int atomisp_pci_probe(struct pci_dev *dev, * in power off. Set d3cold_delay to 0 since default 100ms is not * necessary. */ - isp->pdev->d3cold_delay = 0; + dev->d3cold_delay = 0; break; case ATOMISP_PCI_DEVICE_SOC_ANN: isp->media_dev.hw_revision = ( @@ -1668,7 +1669,7 @@ static int atomisp_pci_probe(struct pci_dev *dev, ATOMISP_HW_REVISION_ISP2401_LEGACY #endif << ATOMISP_HW_REVISION_SHIFT); - isp->media_dev.hw_revision |= isp->pdev->revision < 2 ? + isp->media_dev.hw_revision |= dev->revision < 2 ? ATOMISP_HW_STEPPING_A0 : ATOMISP_HW_STEPPING_B0; isp->dfs = &dfs_config_merr; isp->hpll_freq = HPLL_FREQ_1600MHZ; @@ -1681,11 +1682,11 @@ static int atomisp_pci_probe(struct pci_dev *dev, ATOMISP_HW_REVISION_ISP2401_LEGACY #endif << ATOMISP_HW_REVISION_SHIFT); - isp->media_dev.hw_revision |= isp->pdev->revision < 2 ? + isp->media_dev.hw_revision |= dev->revision < 2 ? ATOMISP_HW_STEPPING_A0 : ATOMISP_HW_STEPPING_B0; isp->dfs = &dfs_config_cht; - isp->pdev->d3cold_delay = 0; + dev->d3cold_delay = 0; iosf_mbi_read(BT_MBI_UNIT_CCK, MBI_REG_READ, CCK_FUSE_REG_0, &val); switch (val & CCK_FUSE_HPLL_FREQ_MASK) { @@ -1743,7 +1744,7 @@ static int atomisp_pci_probe(struct pci_dev *dev, goto enable_msi_fail; } - atomisp_msi_irq_init(isp, dev); + atomisp_msi_irq_init(isp); cpu_latency_qos_add_request(&isp->pm_qos, PM_QOS_DEFAULT_VALUE); @@ -1858,7 +1859,7 @@ register_entities_fail: atomisp_uninitialize_modules(isp); initialize_modules_fail: cpu_latency_qos_remove_request(&isp->pm_qos); - atomisp_msi_irq_uninit(isp, dev); + atomisp_msi_irq_uninit(isp); pci_disable_msi(dev); enable_msi_fail: fw_validation_fail: @@ -1879,7 +1880,7 @@ load_fw_fail: irq &= ~(1 << INTR_IER); pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); - atomisp_msi_irq_uninit(isp, dev); + atomisp_msi_irq_uninit(isp); atomisp_ospm_dphy_down(isp); @@ -1912,7 +1913,7 @@ static void atomisp_pci_remove(struct pci_dev *dev) pm_runtime_get_noresume(&dev->dev); cpu_latency_qos_remove_request(&isp->pm_qos); - atomisp_msi_irq_uninit(isp, dev); + atomisp_msi_irq_uninit(isp); atomisp_unregister_entities(isp); destroy_workqueue(isp->wdt_work_queue); -- cgit v1.2.3 From 89027fea0d04146e6df5e5bff4672655faeb43fb Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 26 Jun 2020 14:19:16 +0200 Subject: media: atomisp: Unify pdev to be pointer to struct pci_device Unify pdev to be pointer to struct pci_device. While here, reindent some (touched) lines for better readability. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_cmd.c | 24 +- .../media/atomisp/pci/atomisp_gmin_platform.c | 6 +- drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 248 ++++++++++----------- 3 files changed, 127 insertions(+), 151 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c index 7a278740d084..dddda97f415e 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c +++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c @@ -360,39 +360,39 @@ static void clear_isp_irq(enum hrt_isp_css_irq irq) void atomisp_msi_irq_init(struct atomisp_device *isp) { - struct pci_dev *dev = to_pci_dev(isp->dev); + struct pci_dev *pdev = to_pci_dev(isp->dev); u32 msg32; u16 msg16; - pci_read_config_dword(dev, PCI_MSI_CAPID, &msg32); + pci_read_config_dword(pdev, PCI_MSI_CAPID, &msg32); msg32 |= 1 << MSI_ENABLE_BIT; - pci_write_config_dword(dev, PCI_MSI_CAPID, msg32); + pci_write_config_dword(pdev, PCI_MSI_CAPID, msg32); msg32 = (1 << INTR_IER) | (1 << INTR_IIR); - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, msg32); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, msg32); - pci_read_config_word(dev, PCI_COMMAND, &msg16); + pci_read_config_word(pdev, PCI_COMMAND, &msg16); msg16 |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INTX_DISABLE); - pci_write_config_word(dev, PCI_COMMAND, msg16); + pci_write_config_word(pdev, PCI_COMMAND, msg16); } void atomisp_msi_irq_uninit(struct atomisp_device *isp) { - struct pci_dev *dev = to_pci_dev(isp->dev); + struct pci_dev *pdev = to_pci_dev(isp->dev); u32 msg32; u16 msg16; - pci_read_config_dword(dev, PCI_MSI_CAPID, &msg32); + pci_read_config_dword(pdev, PCI_MSI_CAPID, &msg32); msg32 &= ~(1 << MSI_ENABLE_BIT); - pci_write_config_dword(dev, PCI_MSI_CAPID, msg32); + pci_write_config_dword(pdev, PCI_MSI_CAPID, msg32); msg32 = 0x0; - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, msg32); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, msg32); - pci_read_config_word(dev, PCI_COMMAND, &msg16); + pci_read_config_word(pdev, PCI_COMMAND, &msg16); msg16 &= ~(PCI_COMMAND_MASTER); - pci_write_config_word(dev, PCI_COMMAND, msg16); + pci_write_config_word(pdev, PCI_COMMAND, msg16); } static void atomisp_sof_event(struct atomisp_sub_device *asd) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index d52040030e35..0c005ddfa2a5 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -1323,10 +1323,10 @@ EXPORT_SYMBOL_GPL(camera_sensor_csi); * trying. The driver itself does direct calls to the PUNIT to manage * ISP power. */ -static void isp_pm_cap_fixup(struct pci_dev *dev) +static void isp_pm_cap_fixup(struct pci_dev *pdev) { - dev_info(&dev->dev, "Disabling PCI power management on camera ISP\n"); - dev->pm_cap = 0; + dev_info(&pdev->dev, "Disabling PCI power management on camera ISP\n"); + pdev->pm_cap = 0; } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0f38, isp_pm_cap_fixup); diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c index 126c1bc75baa..e8431855be07 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c @@ -512,30 +512,27 @@ void atomisp_acc_unregister(struct atomisp_acc_pipe *video) static int atomisp_save_iunit_reg(struct atomisp_device *isp) { - struct pci_dev *dev = to_pci_dev(isp->dev); + struct pci_dev *pdev = to_pci_dev(isp->dev); dev_dbg(isp->dev, "%s\n", __func__); - pci_read_config_word(dev, PCI_COMMAND, &isp->saved_regs.pcicmdsts); + pci_read_config_word(pdev, PCI_COMMAND, &isp->saved_regs.pcicmdsts); /* isp->saved_regs.ispmmadr is set from the atomisp_pci_probe() */ - pci_read_config_dword(dev, PCI_MSI_CAPID, &isp->saved_regs.msicap); - pci_read_config_dword(dev, PCI_MSI_ADDR, &isp->saved_regs.msi_addr); - pci_read_config_word(dev, PCI_MSI_DATA, &isp->saved_regs.msi_data); - pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &isp->saved_regs.intr); - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, - &isp->saved_regs.interrupt_control); - - pci_read_config_dword(dev, MRFLD_PCI_PMCS, - &isp->saved_regs.pmcs); + pci_read_config_dword(pdev, PCI_MSI_CAPID, &isp->saved_regs.msicap); + pci_read_config_dword(pdev, PCI_MSI_ADDR, &isp->saved_regs.msi_addr); + pci_read_config_word(pdev, PCI_MSI_DATA, &isp->saved_regs.msi_data); + pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &isp->saved_regs.intr); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &isp->saved_regs.interrupt_control); + + pci_read_config_dword(pdev, MRFLD_PCI_PMCS, &isp->saved_regs.pmcs); /* Ensure read/write combining is enabled. */ - pci_read_config_dword(dev, PCI_I_CONTROL, - &isp->saved_regs.i_control); + pci_read_config_dword(pdev, PCI_I_CONTROL, &isp->saved_regs.i_control); isp->saved_regs.i_control |= MRFLD_PCI_I_CONTROL_ENABLE_READ_COMBINING | MRFLD_PCI_I_CONTROL_ENABLE_WRITE_COMBINING; - pci_read_config_dword(dev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL, + pci_read_config_dword(pdev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL, &isp->saved_regs.csi_access_viol); - pci_read_config_dword(dev, MRFLD_PCI_CSI_RCOMP_CONTROL, + pci_read_config_dword(pdev, MRFLD_PCI_CSI_RCOMP_CONTROL, &isp->saved_regs.csi_rcomp_config); /* * Hardware bugs require setting CSI_HS_OVR_CLK_GATE_ON_UPDATE. @@ -545,65 +542,58 @@ static int atomisp_save_iunit_reg(struct atomisp_device *isp) * is missed, and IUNIT can hang. * For both issues, setting this bit is a workaround. */ - isp->saved_regs.csi_rcomp_config |= - MRFLD_PCI_CSI_HS_OVR_CLK_GATE_ON_UPDATE; - pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, + isp->saved_regs.csi_rcomp_config |= MRFLD_PCI_CSI_HS_OVR_CLK_GATE_ON_UPDATE; + pci_read_config_dword(pdev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, &isp->saved_regs.csi_afe_dly); - pci_read_config_dword(dev, MRFLD_PCI_CSI_CONTROL, + pci_read_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, &isp->saved_regs.csi_control); if (isp->media_dev.hw_revision >= (ATOMISP_HW_REVISION_ISP2401 << ATOMISP_HW_REVISION_SHIFT)) - isp->saved_regs.csi_control |= - MRFLD_PCI_CSI_CONTROL_PARPATHEN; + isp->saved_regs.csi_control |= MRFLD_PCI_CSI_CONTROL_PARPATHEN; /* * On CHT CSI_READY bit should be enabled before stream on */ if (IS_CHT && (isp->media_dev.hw_revision >= ((ATOMISP_HW_REVISION_ISP2401 << ATOMISP_HW_REVISION_SHIFT) | ATOMISP_HW_STEPPING_B0))) - isp->saved_regs.csi_control |= - MRFLD_PCI_CSI_CONTROL_CSI_READY; - pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL, + isp->saved_regs.csi_control |= MRFLD_PCI_CSI_CONTROL_CSI_READY; + pci_read_config_dword(pdev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL, &isp->saved_regs.csi_afe_rcomp_config); - pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_HS_CONTROL, + pci_read_config_dword(pdev, MRFLD_PCI_CSI_AFE_HS_CONTROL, &isp->saved_regs.csi_afe_hs_control); - pci_read_config_dword(dev, MRFLD_PCI_CSI_DEADLINE_CONTROL, + pci_read_config_dword(pdev, MRFLD_PCI_CSI_DEADLINE_CONTROL, &isp->saved_regs.csi_deadline_control); return 0; } static int __maybe_unused atomisp_restore_iunit_reg(struct atomisp_device *isp) { - struct pci_dev *dev = to_pci_dev(isp->dev); + struct pci_dev *pdev = to_pci_dev(isp->dev); dev_dbg(isp->dev, "%s\n", __func__); - pci_write_config_word(dev, PCI_COMMAND, isp->saved_regs.pcicmdsts); - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, - isp->saved_regs.ispmmadr); - pci_write_config_dword(dev, PCI_MSI_CAPID, isp->saved_regs.msicap); - pci_write_config_dword(dev, PCI_MSI_ADDR, isp->saved_regs.msi_addr); - pci_write_config_word(dev, PCI_MSI_DATA, isp->saved_regs.msi_data); - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, isp->saved_regs.intr); - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, - isp->saved_regs.interrupt_control); - pci_write_config_dword(dev, PCI_I_CONTROL, - isp->saved_regs.i_control); - - pci_write_config_dword(dev, MRFLD_PCI_PMCS, - isp->saved_regs.pmcs); - pci_write_config_dword(dev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL, + pci_write_config_word(pdev, PCI_COMMAND, isp->saved_regs.pcicmdsts); + pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, isp->saved_regs.ispmmadr); + pci_write_config_dword(pdev, PCI_MSI_CAPID, isp->saved_regs.msicap); + pci_write_config_dword(pdev, PCI_MSI_ADDR, isp->saved_regs.msi_addr); + pci_write_config_word(pdev, PCI_MSI_DATA, isp->saved_regs.msi_data); + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, isp->saved_regs.intr); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, isp->saved_regs.interrupt_control); + pci_write_config_dword(pdev, PCI_I_CONTROL, isp->saved_regs.i_control); + + pci_write_config_dword(pdev, MRFLD_PCI_PMCS, isp->saved_regs.pmcs); + pci_write_config_dword(pdev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL, isp->saved_regs.csi_access_viol); - pci_write_config_dword(dev, MRFLD_PCI_CSI_RCOMP_CONTROL, + pci_write_config_dword(pdev, MRFLD_PCI_CSI_RCOMP_CONTROL, isp->saved_regs.csi_rcomp_config); - pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, + pci_write_config_dword(pdev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, isp->saved_regs.csi_afe_dly); - pci_write_config_dword(dev, MRFLD_PCI_CSI_CONTROL, + pci_write_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, isp->saved_regs.csi_control); - pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL, + pci_write_config_dword(pdev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL, isp->saved_regs.csi_afe_rcomp_config); - pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_HS_CONTROL, + pci_write_config_dword(pdev, MRFLD_PCI_CSI_AFE_HS_CONTROL, isp->saved_regs.csi_afe_hs_control); - pci_write_config_dword(dev, MRFLD_PCI_CSI_DEADLINE_CONTROL, + pci_write_config_dword(pdev, MRFLD_PCI_CSI_DEADLINE_CONTROL, isp->saved_regs.csi_deadline_control); /* @@ -619,7 +609,7 @@ static int __maybe_unused atomisp_restore_iunit_reg(struct atomisp_device *isp) static int atomisp_mrfld_pre_power_down(struct atomisp_device *isp) { - struct pci_dev *dev = to_pci_dev(isp->dev); + struct pci_dev *pdev = to_pci_dev(isp->dev); u32 irq; unsigned long flags; @@ -635,11 +625,11 @@ static int atomisp_mrfld_pre_power_down(struct atomisp_device *isp) * So, here we need to check if there is any pending * IRQ, if so, waiting for it to be served */ - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); irq = irq & 1 << INTR_IIR; - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq); - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); if (!(irq & (1 << INTR_IIR))) goto done; @@ -652,11 +642,11 @@ static int atomisp_mrfld_pre_power_down(struct atomisp_device *isp) spin_unlock_irqrestore(&isp->lock, flags); return -EAGAIN; } else { - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); irq = irq & 1 << INTR_IIR; - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq); - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); if (!(irq & (1 << INTR_IIR))) { atomisp_css2_hw_store_32(MRFLD_INTR_ENABLE_REG, 0x0); goto done; @@ -675,9 +665,9 @@ done: * to IIR. It could block subsequent interrupt messages. * HW sighting:4568410. */ - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); irq &= ~(1 << INTR_IER); - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq); atomisp_msi_irq_uninit(isp); atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_LOW, true); @@ -1443,8 +1433,7 @@ atomisp_load_firmware(struct atomisp_device *isp) * Check for flags the driver was compiled with against the PCI * device. Always returns true on other than ISP 2400. */ -static bool is_valid_device(struct pci_dev *dev, - const struct pci_device_id *id) +static bool is_valid_device(struct pci_dev *pdev, const struct pci_device_id *id) { unsigned int a0_max_id = 0; const char *name; @@ -1468,14 +1457,14 @@ static bool is_valid_device(struct pci_dev *dev, name = "Cherrytrail"; break; default: - dev_err(&dev->dev, "%s: unknown device ID %x04:%x04\n", + dev_err(&pdev->dev, "%s: unknown device ID %x04:%x04\n", product, id->vendor, id->device); return false; } - if (dev->revision <= ATOMISP_PCI_REV_BYT_A0_MAX) { - dev_err(&dev->dev, "%s revision %d is not unsupported\n", - name, dev->revision); + if (pdev->revision <= ATOMISP_PCI_REV_BYT_A0_MAX) { + dev_err(&pdev->dev, "%s revision %d is not unsupported\n", + name, pdev->revision); return false; } @@ -1486,22 +1475,20 @@ static bool is_valid_device(struct pci_dev *dev, #if defined(ISP2400) if (IS_ISP2401) { - dev_err(&dev->dev, "Support for %s (ISP2401) was disabled at compile time\n", + dev_err(&pdev->dev, "Support for %s (ISP2401) was disabled at compile time\n", name); return false; } #else if (!IS_ISP2401) { - dev_err(&dev->dev, "Support for %s (ISP2400) was disabled at compile time\n", + dev_err(&pdev->dev, "Support for %s (ISP2400) was disabled at compile time\n", name); return false; } #endif - dev_info(&dev->dev, "Detected %s version %d (ISP240%c) on %s\n", - name, dev->revision, - IS_ISP2401 ? '1' : '0', - product); + dev_info(&pdev->dev, "Detected %s version %d (ISP240%c) on %s\n", + name, pdev->revision, IS_ISP2401 ? '1' : '0', product); return true; } @@ -1541,8 +1528,7 @@ alloc_fail: #define ATOM_ISP_PCI_BAR 0 -static int atomisp_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id) +static int atomisp_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { const struct atomisp_platform_data *pdata; struct atomisp_device *isp; @@ -1551,47 +1537,45 @@ static int atomisp_pci_probe(struct pci_dev *dev, int err, val; u32 irq; - if (!is_valid_device(dev, id)) + if (!is_valid_device(pdev, id)) return -ENODEV; /* Pointer to struct device. */ - atomisp_dev = &dev->dev; + atomisp_dev = &pdev->dev; pdata = atomisp_get_platform_data(); if (!pdata) - dev_warn(&dev->dev, "no platform data available\n"); + dev_warn(&pdev->dev, "no platform data available\n"); - err = pcim_enable_device(dev); + err = pcim_enable_device(pdev); if (err) { - dev_err(&dev->dev, "Failed to enable CI ISP device (%d)\n", - err); + dev_err(&pdev->dev, "Failed to enable CI ISP device (%d)\n", err); return err; } - start = pci_resource_start(dev, ATOM_ISP_PCI_BAR); - dev_dbg(&dev->dev, "start: 0x%x\n", start); + start = pci_resource_start(pdev, ATOM_ISP_PCI_BAR); + dev_dbg(&pdev->dev, "start: 0x%x\n", start); - err = pcim_iomap_regions(dev, 1 << ATOM_ISP_PCI_BAR, pci_name(dev)); + err = pcim_iomap_regions(pdev, 1 << ATOM_ISP_PCI_BAR, pci_name(pdev)); if (err) { - dev_err(&dev->dev, "Failed to I/O memory remapping (%d)\n", - err); + dev_err(&pdev->dev, "Failed to I/O memory remapping (%d)\n", err); goto ioremap_fail; } - base = pcim_iomap_table(dev)[ATOM_ISP_PCI_BAR]; - dev_dbg(&dev->dev, "base: %p\n", base); + base = pcim_iomap_table(pdev)[ATOM_ISP_PCI_BAR]; + dev_dbg(&pdev->dev, "base: %p\n", base); atomisp_io_base = base; - dev_dbg(&dev->dev, "atomisp_io_base: %p\n", atomisp_io_base); + dev_dbg(&pdev->dev, "atomisp_io_base: %p\n", atomisp_io_base); - isp = devm_kzalloc(&dev->dev, sizeof(struct atomisp_device), GFP_KERNEL); + isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL); if (!isp) { err = -ENOMEM; goto atomisp_dev_alloc_fail; } - isp->dev = &dev->dev; + isp->dev = &pdev->dev; isp->sw_contex.power_state = ATOM_ISP_POWER_UP; isp->saved_regs.ispmmadr = start; @@ -1600,7 +1584,7 @@ static int atomisp_pci_probe(struct pci_dev *dev, spin_lock_init(&isp->lock); /* This is not a true PCI device on SoC, so the delay is not needed. */ - dev->d3_delay = 0; + pdev->d3_delay = 0; switch (id->device & ATOMISP_PCI_DEVICE_SOC_MASK) { case ATOMISP_PCI_DEVICE_SOC_MRFLD: @@ -1651,15 +1635,14 @@ static int atomisp_pci_probe(struct pci_dev *dev, * have specs yet for exactly how it varies. Default to * BYT-CR but let provisioning set it via EFI variable */ - isp->hpll_freq = gmin_get_var_int(&dev->dev, false, "HpllFreq", - HPLL_FREQ_2000MHZ); + isp->hpll_freq = gmin_get_var_int(&pdev->dev, false, "HpllFreq", HPLL_FREQ_2000MHZ); /* * for BYT/CHT we are put isp into D3cold to avoid pci registers access * in power off. Set d3cold_delay to 0 since default 100ms is not * necessary. */ - dev->d3cold_delay = 0; + pdev->d3cold_delay = 0; break; case ATOMISP_PCI_DEVICE_SOC_ANN: isp->media_dev.hw_revision = ( @@ -1669,7 +1652,7 @@ static int atomisp_pci_probe(struct pci_dev *dev, ATOMISP_HW_REVISION_ISP2401_LEGACY #endif << ATOMISP_HW_REVISION_SHIFT); - isp->media_dev.hw_revision |= dev->revision < 2 ? + isp->media_dev.hw_revision |= pdev->revision < 2 ? ATOMISP_HW_STEPPING_A0 : ATOMISP_HW_STEPPING_B0; isp->dfs = &dfs_config_merr; isp->hpll_freq = HPLL_FREQ_1600MHZ; @@ -1682,11 +1665,11 @@ static int atomisp_pci_probe(struct pci_dev *dev, ATOMISP_HW_REVISION_ISP2401_LEGACY #endif << ATOMISP_HW_REVISION_SHIFT); - isp->media_dev.hw_revision |= dev->revision < 2 ? + isp->media_dev.hw_revision |= pdev->revision < 2 ? ATOMISP_HW_STEPPING_A0 : ATOMISP_HW_STEPPING_B0; isp->dfs = &dfs_config_cht; - dev->d3cold_delay = 0; + pdev->d3cold_delay = 0; iosf_mbi_read(BT_MBI_UNIT_CCK, MBI_REG_READ, CCK_FUSE_REG_0, &val); switch (val & CCK_FUSE_HPLL_FREQ_MASK) { @@ -1701,18 +1684,16 @@ static int atomisp_pci_probe(struct pci_dev *dev, break; default: isp->hpll_freq = HPLL_FREQ_1600MHZ; - dev_warn(isp->dev, - "read HPLL from cck failed. Default to 1600 MHz.\n"); + dev_warn(&pdev->dev, "read HPLL from cck failed. Default to 1600 MHz.\n"); } break; default: - dev_err(&dev->dev, "un-supported IUNIT device\n"); + dev_err(&pdev->dev, "un-supported IUNIT device\n"); err = -ENODEV; goto atomisp_dev_alloc_fail; } - dev_info(&dev->dev, "ISP HPLL frequency base = %d MHz\n", - isp->hpll_freq); + dev_info(&pdev->dev, "ISP HPLL frequency base = %d MHz\n", isp->hpll_freq); isp->max_isr_latency = ATOMISP_MAX_ISR_LATENCY; @@ -1721,26 +1702,25 @@ static int atomisp_pci_probe(struct pci_dev *dev, isp->firmware = atomisp_load_firmware(isp); if (!isp->firmware) { err = -ENOENT; - dev_dbg(&dev->dev, "Firmware load failed\n"); + dev_dbg(&pdev->dev, "Firmware load failed\n"); goto load_fw_fail; } - err = sh_css_check_firmware_version(isp->dev, - isp->firmware->data); + err = sh_css_check_firmware_version(isp->dev, isp->firmware->data); if (err) { - dev_dbg(&dev->dev, "Firmware version check failed\n"); + dev_dbg(&pdev->dev, "Firmware version check failed\n"); goto fw_validation_fail; } } else { - dev_info(&dev->dev, "Firmware load will be deferred\n"); + dev_info(&pdev->dev, "Firmware load will be deferred\n"); } - pci_set_master(dev); - pci_set_drvdata(dev, isp); + pci_set_master(pdev); + pci_set_drvdata(pdev, isp); - err = pci_enable_msi(dev); + err = pci_enable_msi(pdev); if (err) { - dev_err(&dev->dev, "Failed to enable msi (%d)\n", err); + dev_err(&pdev->dev, "Failed to enable msi (%d)\n", err); goto enable_msi_fail; } @@ -1765,8 +1745,7 @@ static int atomisp_pci_probe(struct pci_dev *dev, * Workaround for imbalance data eye issue which is observed * on TNG B0. */ - pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, - &csi_afe_trim); + pci_read_config_dword(pdev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, &csi_afe_trim); csi_afe_trim &= ~((MRFLD_PCI_CSI_HSRXCLKTRIM_MASK << MRFLD_PCI_CSI1_HSRXCLKTRIM_SHIFT) | (MRFLD_PCI_CSI_HSRXCLKTRIM_MASK << @@ -1779,20 +1758,18 @@ static int atomisp_pci_probe(struct pci_dev *dev, MRFLD_PCI_CSI2_HSRXCLKTRIM_SHIFT) | (MRFLD_PCI_CSI3_HSRXCLKTRIM << MRFLD_PCI_CSI3_HSRXCLKTRIM_SHIFT); - pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, - csi_afe_trim); + pci_write_config_dword(pdev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, csi_afe_trim); } err = atomisp_initialize_modules(isp); if (err < 0) { - dev_err(&dev->dev, "atomisp_initialize_modules (%d)\n", err); + dev_err(&pdev->dev, "atomisp_initialize_modules (%d)\n", err); goto initialize_modules_fail; } err = atomisp_register_entities(isp); if (err < 0) { - dev_err(&dev->dev, "atomisp_register_entities failed (%d)\n", - err); + dev_err(&pdev->dev, "atomisp_register_entities failed (%d)\n", err); goto register_entities_fail; } err = atomisp_create_pads_links(isp); @@ -1805,24 +1782,24 @@ static int atomisp_pci_probe(struct pci_dev *dev, /* save the iunit context only once after all the values are init'ed. */ atomisp_save_iunit_reg(isp); - pm_runtime_put_noidle(&dev->dev); - pm_runtime_allow(&dev->dev); + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_allow(&pdev->dev); hmm_init_mem_stat(repool_pgnr, dypool_enable, dypool_pgnr); err = hmm_pool_register(repool_pgnr, HMM_POOL_TYPE_RESERVED); if (err) { - dev_err(&dev->dev, "Failed to register reserved memory pool.\n"); + dev_err(&pdev->dev, "Failed to register reserved memory pool.\n"); goto hmm_pool_fail; } /* Init ISP memory management */ hmm_init(); - err = devm_request_threaded_irq(&dev->dev, dev->irq, + err = devm_request_threaded_irq(&pdev->dev, pdev->irq, atomisp_isr, atomisp_isr_thread, IRQF_SHARED, "isp_irq", isp); if (err) { - dev_err(&dev->dev, "Failed to request irq (%d)\n", err); + dev_err(&pdev->dev, "Failed to request irq (%d)\n", err); goto request_irq_fail; } @@ -1830,11 +1807,11 @@ static int atomisp_pci_probe(struct pci_dev *dev, if (!defer_fw_load) { err = atomisp_css_load_firmware(isp); if (err) { - dev_err(&dev->dev, "Failed to init css.\n"); + dev_err(&pdev->dev, "Failed to init css.\n"); goto css_init_fail; } } else { - dev_dbg(&dev->dev, "Skip css init.\n"); + dev_dbg(&pdev->dev, "Skip css init.\n"); } /* Clear FW image from memory */ release_firmware(isp->firmware); @@ -1846,7 +1823,7 @@ static int atomisp_pci_probe(struct pci_dev *dev, return 0; css_init_fail: - devm_free_irq(&dev->dev, dev->irq, isp); + devm_free_irq(&pdev->dev, pdev->irq, isp); request_irq_fail: hmm_cleanup(); hmm_pool_unregister(HMM_POOL_TYPE_RESERVED); @@ -1860,7 +1837,7 @@ register_entities_fail: initialize_modules_fail: cpu_latency_qos_remove_request(&isp->pm_qos); atomisp_msi_irq_uninit(isp); - pci_disable_msi(dev); + pci_disable_msi(pdev); enable_msi_fail: fw_validation_fail: release_firmware(isp->firmware); @@ -1872,13 +1849,13 @@ load_fw_fail: * The following lines have been copied from atomisp suspend path */ - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); irq = irq & 1 << INTR_IIR; - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq); - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); irq &= ~(1 << INTR_IER); - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq); atomisp_msi_irq_uninit(isp); @@ -1886,21 +1863,20 @@ load_fw_fail: /* Address later when we worry about the ...field chips */ if (IS_ENABLED(CONFIG_PM) && atomisp_mrfld_power_down(isp)) - dev_err(&dev->dev, "Failed to switch off ISP\n"); + dev_err(&pdev->dev, "Failed to switch off ISP\n"); atomisp_dev_alloc_fail: - pcim_iounmap_regions(dev, 1 << ATOM_ISP_PCI_BAR); + pcim_iounmap_regions(pdev, 1 << ATOM_ISP_PCI_BAR); ioremap_fail: return err; } -static void atomisp_pci_remove(struct pci_dev *dev) +static void atomisp_pci_remove(struct pci_dev *pdev) { - struct atomisp_device *isp = (struct atomisp_device *) - pci_get_drvdata(dev); + struct atomisp_device *isp = pci_get_drvdata(pdev); - dev_info(&dev->dev, "Removing atomisp driver\n"); + dev_info(&pdev->dev, "Removing atomisp driver\n"); atomisp_drvfs_exit(); @@ -1909,8 +1885,8 @@ static void atomisp_pci_remove(struct pci_dev *dev) ia_css_unload_firmware(); hmm_cleanup(); - pm_runtime_forbid(&dev->dev); - pm_runtime_get_noresume(&dev->dev); + pm_runtime_forbid(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); cpu_latency_qos_remove_request(&isp->pm_qos); atomisp_msi_irq_uninit(isp); -- cgit v1.2.3 From 71aecd5d63eea41bc5f6a03e3a868bbe44c2acef Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 26 Jun 2020 14:19:17 +0200 Subject: media: atomisp: Replace direct access to MMIO with proper helpers We have special helpers to access MMIO. Use them. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_cmd.c | 13 +++---- drivers/staging/media/atomisp/pci/atomisp_compat.h | 2 - .../media/atomisp/pci/atomisp_compat_css20.c | 43 ++++++++++++---------- .../staging/media/atomisp/pci/atomisp_internal.h | 1 + drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 16 +++----- 5 files changed, 35 insertions(+), 40 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c index dddda97f415e..8ea65bef35d2 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c +++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -669,11 +670,10 @@ bool atomisp_buffers_queued_pipe(struct atomisp_video_pipe *pipe) void dump_sp_dmem(struct atomisp_device *isp, unsigned int addr, unsigned int size) { - u32 __iomem *io_virt_addr; unsigned int data = 0; unsigned int size32 = DIV_ROUND_UP(size, sizeof(u32)); - dev_dbg(isp->dev, "atomisp_io_base:%p\n", atomisp_io_base); + dev_dbg(isp->dev, "atomisp mmio base: %p\n", isp->base); dev_dbg(isp->dev, "%s, addr:0x%x, size: %d, size32: %d\n", __func__, addr, size, size32); if (size32 * 4 + addr > 0x4000) { @@ -682,13 +682,12 @@ void dump_sp_dmem(struct atomisp_device *isp, unsigned int addr, return; } addr += SP_DMEM_BASE; - io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + addr &= 0x003FFFFF; do { - data = *io_virt_addr; + data = readl(isp->base + addr); dev_dbg(isp->dev, "%s, \t [0x%x]:0x%x\n", __func__, addr, data); - io_virt_addr += sizeof(u32); - size32 -= 1; - } while (size32 > 0); + addr += sizeof(u32); + } while (--size32); } static struct videobuf_buffer *atomisp_css_frame_to_vbuf( diff --git a/drivers/staging/media/atomisp/pci/atomisp_compat.h b/drivers/staging/media/atomisp/pci/atomisp_compat.h index b2ed83c2f337..6a2a81a3eb23 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_compat.h +++ b/drivers/staging/media/atomisp/pci/atomisp_compat.h @@ -29,8 +29,6 @@ struct atomisp_sub_device; struct video_device; enum atomisp_input_stream_id; -extern void __iomem *atomisp_io_base; - struct atomisp_metadata_buf { struct ia_css_metadata *metadata; void *md_vptr; diff --git a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c index df352be06474..010b2b19d811 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c +++ b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c @@ -38,6 +38,7 @@ #include "sh_css_hrt.h" #include "ia_css_isys.h" +#include #include /* Assume max number of ACC stages */ @@ -67,92 +68,94 @@ struct bayer_ds_factor { static void atomisp_css2_hw_store_8(hrt_address addr, uint8_t data) { - s8 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; spin_lock_irqsave(&mmio_lock, flags); - *io_virt_addr = data; + writeb(data, isp->base + (addr & 0x003FFFFF)); spin_unlock_irqrestore(&mmio_lock, flags); } static void atomisp_css2_hw_store_16(hrt_address addr, uint16_t data) { - s16 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; spin_lock_irqsave(&mmio_lock, flags); - *io_virt_addr = data; + writew(data, isp->base + (addr & 0x003FFFFF)); spin_unlock_irqrestore(&mmio_lock, flags); } void atomisp_css2_hw_store_32(hrt_address addr, uint32_t data) { - s32 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; spin_lock_irqsave(&mmio_lock, flags); - *io_virt_addr = data; + writel(data, isp->base + (addr & 0x003FFFFF)); spin_unlock_irqrestore(&mmio_lock, flags); } static uint8_t atomisp_css2_hw_load_8(hrt_address addr) { - s8 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; u8 ret; spin_lock_irqsave(&mmio_lock, flags); - ret = *io_virt_addr; + ret = readb(isp->base + (addr & 0x003FFFFF)); spin_unlock_irqrestore(&mmio_lock, flags); return ret; } static uint16_t atomisp_css2_hw_load_16(hrt_address addr) { - s16 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; u16 ret; spin_lock_irqsave(&mmio_lock, flags); - ret = *io_virt_addr; + ret = readw(isp->base + (addr & 0x003FFFFF)); spin_unlock_irqrestore(&mmio_lock, flags); return ret; } static uint32_t atomisp_css2_hw_load_32(hrt_address addr) { - s32 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; u32 ret; spin_lock_irqsave(&mmio_lock, flags); - ret = *io_virt_addr; + ret = readl(isp->base + (addr & 0x003FFFFF)); spin_unlock_irqrestore(&mmio_lock, flags); return ret; } -static void atomisp_css2_hw_store(hrt_address addr, - const void *from, uint32_t n) +static void atomisp_css2_hw_store(hrt_address addr, const void *from, uint32_t n) { - s8 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; unsigned int i; + addr &= 0x003FFFFF; spin_lock_irqsave(&mmio_lock, flags); - for (i = 0; i < n; i++, io_virt_addr++, from++) - *io_virt_addr = *(s8 *)from; + for (i = 0; i < n; i++, from++) + writeb(*(s8 *)from, isp->base + addr + i); + spin_unlock_irqrestore(&mmio_lock, flags); } static void atomisp_css2_hw_load(hrt_address addr, void *to, uint32_t n) { - s8 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; unsigned int i; + addr &= 0x003FFFFF; spin_lock_irqsave(&mmio_lock, flags); - for (i = 0; i < n; i++, to++, io_virt_addr++) - *(s8 *)to = *io_virt_addr; + for (i = 0; i < n; i++, to++) + *(s8 *)to = readb(isp->base + addr + i); spin_unlock_irqrestore(&mmio_lock, flags); } diff --git a/drivers/staging/media/atomisp/pci/atomisp_internal.h b/drivers/staging/media/atomisp/pci/atomisp_internal.h index 5af9bbce6284..c01db10bb735 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_internal.h +++ b/drivers/staging/media/atomisp/pci/atomisp_internal.h @@ -221,6 +221,7 @@ struct atomisp_device { struct media_device media_dev; struct atomisp_platform_data *pdata; void *mmu_l1_base; + void __iomem *base; const struct firmware *firmware; struct pm_qos_request pm_qos; diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c index e8431855be07..61dcf5cf4ed1 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c @@ -127,8 +127,6 @@ MODULE_PARM_DESC(pad_h, "extra data for ISP processing"); struct device *atomisp_dev; -void __iomem *atomisp_io_base; - static const struct atomisp_freq_scaling_rule dfs_rules_merr[] = { { .width = ISP_FREQ_RULE_ANY, @@ -1533,7 +1531,6 @@ static int atomisp_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i const struct atomisp_platform_data *pdata; struct atomisp_device *isp; unsigned int start; - void __iomem *base; int err, val; u32 irq; @@ -1562,13 +1559,6 @@ static int atomisp_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i goto ioremap_fail; } - base = pcim_iomap_table(pdev)[ATOM_ISP_PCI_BAR]; - dev_dbg(&pdev->dev, "base: %p\n", base); - - atomisp_io_base = base; - - dev_dbg(&pdev->dev, "atomisp_io_base: %p\n", atomisp_io_base); - isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL); if (!isp) { err = -ENOMEM; @@ -1576,9 +1566,12 @@ static int atomisp_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i } isp->dev = &pdev->dev; + isp->base = pcim_iomap_table(pdev)[ATOM_ISP_PCI_BAR]; isp->sw_contex.power_state = ATOM_ISP_POWER_UP; isp->saved_regs.ispmmadr = start; + dev_dbg(&pdev->dev, "atomisp mmio base: %p\n", isp->base); + rt_mutex_init(&isp->mutex); mutex_init(&isp->streamoff_mutex); spin_lock_init(&isp->lock); @@ -1586,6 +1579,8 @@ static int atomisp_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i /* This is not a true PCI device on SoC, so the delay is not needed. */ pdev->d3_delay = 0; + pci_set_drvdata(pdev, isp); + switch (id->device & ATOMISP_PCI_DEVICE_SOC_MASK) { case ATOMISP_PCI_DEVICE_SOC_MRFLD: isp->media_dev.hw_revision = @@ -1716,7 +1711,6 @@ static int atomisp_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i } pci_set_master(pdev); - pci_set_drvdata(pdev, isp); err = pci_enable_msi(pdev); if (err) { -- cgit v1.2.3 From 250977de59340d2bdaa83bb78e03c4c38957b998 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 26 Jun 2020 14:19:18 +0200 Subject: media: atomisp: Drop global atomisp_dev variable (easy cases) Refactor code to avoid use of atomisp_dev global variable where it's easy to achieve. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_acc.c | 4 ++-- drivers/staging/media/atomisp/pci/atomisp_compat_css20.c | 16 +++++++--------- drivers/staging/media/atomisp/pci/atomisp_compat_css20.h | 2 +- drivers/staging/media/atomisp/pci/atomisp_drvfs.c | 11 +++++------ 4 files changed, 15 insertions(+), 18 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_acc.c b/drivers/staging/media/atomisp/pci/atomisp_acc.c index 76861396ba86..f638d0bd09fe 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_acc.c +++ b/drivers/staging/media/atomisp/pci/atomisp_acc.c @@ -355,11 +355,11 @@ int atomisp_acc_map(struct atomisp_sub_device *asd, struct atomisp_acc_map *map) pgnr = DIV_ROUND_UP(map->length, PAGE_SIZE); if (pgnr < ((PAGE_ALIGN(map->length)) >> PAGE_SHIFT)) { - dev_err(atomisp_dev, + dev_err(asd->isp->dev, "user space memory size is less than the expected size..\n"); return -ENOMEM; } else if (pgnr > ((PAGE_ALIGN(map->length)) >> PAGE_SHIFT)) { - dev_err(atomisp_dev, + dev_err(asd->isp->dev, "user space memory size is large than the expected size..\n"); return -ENOMEM; } diff --git a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c index 010b2b19d811..499916bc6aab 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c +++ b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c @@ -182,10 +182,10 @@ void atomisp_load_uint32(hrt_address addr, uint32_t *data) *data = atomisp_css2_hw_load_32(addr); } -static int hmm_get_mmu_base_addr(unsigned int *mmu_base_addr) +static int hmm_get_mmu_base_addr(struct device *dev, unsigned int *mmu_base_addr) { if (!sh_mmu_mrfld.get_pd_base) { - dev_err(atomisp_dev, "get mmu base address failed.\n"); + dev_err(dev, "get mmu base address failed.\n"); return -EINVAL; } @@ -840,7 +840,7 @@ int atomisp_css_init(struct atomisp_device *isp) int ret; int err; - ret = hmm_get_mmu_base_addr(&mmu_base_addr); + ret = hmm_get_mmu_base_addr(isp->dev, &mmu_base_addr); if (ret) return ret; @@ -942,7 +942,7 @@ int atomisp_css_resume(struct atomisp_device *isp) unsigned int mmu_base_addr; int ret; - ret = hmm_get_mmu_base_addr(&mmu_base_addr); + ret = hmm_get_mmu_base_addr(isp->dev, &mmu_base_addr); if (ret) { dev_err(isp->dev, "get base address error.\n"); return -EINVAL; @@ -4337,7 +4337,7 @@ static const char * const fw_acc_type_name[] = { [IA_CSS_ACC_STANDALONE] = "Stand-alone acceleration", }; -int atomisp_css_dump_blob_infor(void) +int atomisp_css_dump_blob_infor(struct atomisp_device *isp) { struct ia_css_blob_descr *bd = sh_css_blob_info; unsigned int i, nm = sh_css_num_binaries; @@ -4354,8 +4354,7 @@ int atomisp_css_dump_blob_infor(void) for (i = 0; i < sh_css_num_binaries - NUM_OF_SPS; i++) { switch (bd[i].header.type) { case ia_css_isp_firmware: - dev_dbg(atomisp_dev, - "Num%2d type %s (%s), binary id is %2d, name is %s\n", + dev_dbg(isp->dev, "Num%2d type %s (%s), binary id is %2d, name is %s\n", i + NUM_OF_SPS, fw_type_name[bd[i].header.type], fw_acc_type_name[bd[i].header.info.isp.type], @@ -4363,8 +4362,7 @@ int atomisp_css_dump_blob_infor(void) bd[i].name); break; default: - dev_dbg(atomisp_dev, - "Num%2d type %s, name is %s\n", + dev_dbg(isp->dev, "Num%2d type %s, name is %s\n", i + NUM_OF_SPS, fw_type_name[bd[i].header.type], bd[i].name); } diff --git a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.h b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.h index 8376aec18e3e..e0601534380f 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.h +++ b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.h @@ -153,7 +153,7 @@ int atomisp_css_debug_dump_isp_binary(void); int atomisp_css_dump_sp_raw_copy_linecount(bool reduced); -int atomisp_css_dump_blob_infor(void); +int atomisp_css_dump_blob_infor(struct atomisp_device *isp); void atomisp_css_set_isp_config_id(struct atomisp_sub_device *asd, uint32_t isp_config_id); diff --git a/drivers/staging/media/atomisp/pci/atomisp_drvfs.c b/drivers/staging/media/atomisp/pci/atomisp_drvfs.c index 3711df111fbf..f670faf978e6 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_drvfs.c +++ b/drivers/staging/media/atomisp/pci/atomisp_drvfs.c @@ -62,9 +62,9 @@ static inline int iunit_dump_dbgopt(struct atomisp_device *isp, if (opt & OPTION_VALID) { if (opt & OPTION_BIN_LIST) { - ret = atomisp_css_dump_blob_infor(); + ret = atomisp_css_dump_blob_infor(isp); if (ret) { - dev_err(atomisp_dev, "%s dump blob infor err[ret:%d]\n", + dev_err(isp->dev, "%s dump blob infor err[ret:%d]\n", __func__, ret); goto opt_err; } @@ -76,7 +76,7 @@ static inline int iunit_dump_dbgopt(struct atomisp_device *isp, atomisp_css_debug_dump_isp_binary(); } else { ret = -EPERM; - dev_err(atomisp_dev, "%s dump running bin err[ret:%d]\n", + dev_err(isp->dev, "%s dump running bin err[ret:%d]\n", __func__, ret); goto opt_err; } @@ -86,8 +86,7 @@ static inline int iunit_dump_dbgopt(struct atomisp_device *isp, hmm_show_mem_stat(__func__, __LINE__); } else { ret = -EINVAL; - dev_err(atomisp_dev, "%s dump nothing[ret=%d]\n", __func__, - ret); + dev_err(isp->dev, "%s dump nothing[ret=%d]\n", __func__, ret); } opt_err: @@ -195,7 +194,7 @@ int atomisp_drvfs_init(struct atomisp_device *isp) ret = iunit_drvfs_create_files(iunit_debug.drv); if (ret) { - dev_err(atomisp_dev, "drvfs_create_files error: %d\n", ret); + dev_err(isp->dev, "drvfs_create_files error: %d\n", ret); iunit_drvfs_remove_files(iunit_debug.drv); } -- cgit v1.2.3 From 96310fd873897dc08274f4dfd6f8a5c3e009a5a4 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 26 Jun 2020 14:19:19 +0200 Subject: media: atomisp: make platform data more readable Add few blank lines to make platform data more readable. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index 0c005ddfa2a5..5c082fd3517f 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -284,6 +284,7 @@ static struct gmin_cfg_var mrd7_vars[] = { {"INT33F8:00_CsiFmt", "13"}, {"INT33F8:00_CsiBayer", "0"}, {"INT33F8:00_CamClk", "0"}, + {"INT33F9:00_CamType", "1"}, {"INT33F9:00_CsiPort", "0"}, {"INT33F9:00_CsiLanes", "1"}, @@ -299,6 +300,7 @@ static struct gmin_cfg_var ecs7_vars[] = { {"INT33BE:00_CsiFmt", "13"}, {"INT33BE:00_CsiBayer", "2"}, {"INT33BE:00_CamClk", "0"}, + {"INT33F0:00_CsiPort", "0"}, {"INT33F0:00_CsiLanes", "1"}, {"INT33F0:00_CsiFmt", "13"}, @@ -312,6 +314,7 @@ static struct gmin_cfg_var i8880_vars[] = { {"XXOV2680:00_CsiPort", "1"}, {"XXOV2680:00_CsiLanes", "1"}, {"XXOV2680:00_CamClk", "0"}, + {"XXGC0310:00_CsiPort", "0"}, {"XXGC0310:00_CsiLanes", "1"}, {"XXGC0310:00_CamClk", "1"}, -- cgit v1.2.3 From 0f46ab461e3a15ba6f9c5e0c12233b3339abc42e Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 26 Jun 2020 14:19:20 +0200 Subject: media: atomisp: Don't try to parse unexpected ACPI object type There are devices with completely different _DSM() format, and accessing object as a package leads to crashes. Bail out in the case of unexpected object type. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index 5c082fd3517f..164f02820ae4 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -1134,6 +1134,10 @@ static int gmin_get_config_dsm_var(struct device *dev, return -EINVAL; } + /* Return on unexpected object type */ + if (obj->type != ACPI_TYPE_PACKAGE) + return -EINVAL; + #if 0 /* Just for debugging purposes */ for (i = 0; i < obj->package.count; i++) { union acpi_object *cur = &obj->package.elements[i]; -- cgit v1.2.3 From 2e31e6f89c728ddbfc803f213823917dc705c330 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 26 Jun 2020 14:19:21 +0200 Subject: media: atomisp: Make pointer to PMIC client global When we enumerate second device when PMIC has been successfully detected to AXP, we got into troubles dereferencing NULL pointer. It seems we have to detect PMIC only once because pmic_id is a global variable and code doesn't expect the change of it: Two PMICs on one platform? It's impossible. Crash excerpt: [ 34.335237] BUG: kernel NULL pointer dereference, address: 0000000000000002 ... [ 35.652036] RIP: 0010:gmin_subdev_add.cold+0x32f/0x33e [atomisp_gmin_platform] So, as a quick fix make power a global variable. In next patches we move PMIC detection to be more independent from subdevices. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index 164f02820ae4..56a268415e98 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -482,9 +482,11 @@ fail: return clock_num; } +static struct i2c_client *power; + static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) { - struct i2c_client *power = NULL, *client = v4l2_get_subdevdata(subdev); + struct i2c_client *client = v4l2_get_subdevdata(subdev); struct acpi_device *adev; struct gmin_subdev *gs; acpi_handle handle; @@ -696,7 +698,6 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) gs->eldo2_ctrl_shift = gmin_get_var_int(dev, false, "eldo2_ctrl_shift", ELDO2_CTRL_SHIFT); - gs->pwm_i2c_addr = power->addr; break; default: -- cgit v1.2.3 From e4fb745c9575b0d02548ebd024c95b75fd038c03 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 26 Jun 2020 14:19:25 +0200 Subject: media: atomisp: Deduplicate return ret in gmin_i2c_write() Deduplicate return ret in gmin_i2c_write(). While here, replace 'Kernel' by 'kernel' in the message and reduce amount of LOCs. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index 56a268415e98..997c3ec6564c 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -413,16 +413,12 @@ static int gmin_i2c_write(struct device *dev, u16 i2c_addr, u8 reg, "I2C write, addr: 0x%02x, reg: 0x%02x, value: 0x%02x, mask: 0x%02x\n", i2c_addr, reg, value, mask); - ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_addr, reg, - value, mask); - - if (ret == -EOPNOTSUPP) { + ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_addr, reg, value, mask); + if (ret == -EOPNOTSUPP) dev_err(dev, "ACPI didn't mapped the OpRegion needed to access I2C address 0x%02x.\n" - "Need to compile the Kernel using CONFIG_*_PMIC_OPREGION settings\n", + "Need to compile the kernel using CONFIG_*_PMIC_OPREGION settings\n", i2c_addr); - return ret; - } return ret; } -- cgit v1.2.3 From c30f4cb2d4c785b8bd0ea1710af7a542aeca1bbe Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 29 Jun 2020 12:57:35 +0200 Subject: media: atomisp: Refactor PMIC detection to a separate function Refactor PMIC detection to a separate function. In the future we may move this code somewhere else where it's more suitable. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- .../media/atomisp/pci/atomisp_gmin_platform.c | 59 +++++++++++++--------- 1 file changed, 36 insertions(+), 23 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index 997c3ec6564c..efd5e92ad7f6 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -478,7 +478,38 @@ fail: return clock_num; } -static struct i2c_client *power; +static u8 gmin_get_pmic_id_and_addr(struct device *dev) +{ + struct i2c_client *power; + static u8 pmic_i2c_addr; + + if (pmic_id) + return pmic_i2c_addr; + + if (gmin_i2c_dev_exists(dev, PMIC_ACPI_TI, &power)) + pmic_id = PMIC_TI; + else if (gmin_i2c_dev_exists(dev, PMIC_ACPI_AXP, &power)) + pmic_id = PMIC_AXP; + else if (gmin_i2c_dev_exists(dev, PMIC_ACPI_CRYSTALCOVE, &power)) + pmic_id = PMIC_CRYSTALCOVE; + else + pmic_id = PMIC_REGULATOR; + + pmic_i2c_addr = power ? power->addr : 0; + return pmic_i2c_addr; +} + +static int gmin_detect_pmic(struct v4l2_subdev *subdev) +{ + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct device *dev = &client->dev; + u8 pmic_i2c_addr; + + pmic_i2c_addr = gmin_get_pmic_id_and_addr(dev); + dev_info(dev, "gmin: power management provided via %s (i2c addr 0x%02x)\n", + pmic_name[pmic_id], pmic_i2c_addr); + return pmic_i2c_addr; +} static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) { @@ -580,27 +611,6 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) * in order to set clocks and do power management. */ - if (!pmic_id) { - if (gmin_i2c_dev_exists(dev, PMIC_ACPI_TI, &power)) - pmic_id = PMIC_TI; - else if (gmin_i2c_dev_exists(dev, PMIC_ACPI_AXP, &power)) - pmic_id = PMIC_AXP; - else if (gmin_i2c_dev_exists(dev, PMIC_ACPI_CRYSTALCOVE, &power)) - pmic_id = PMIC_CRYSTALCOVE; - else - pmic_id = PMIC_REGULATOR; - } - - if (power) { - gs->pwm_i2c_addr = power->addr; - dev_info(dev, - "gmin: power management provided via %s (i2c addr 0x%02x)\n", - pmic_name[pmic_id], power->addr); - } else { - dev_info(dev, "gmin: power management provided via %s\n", - pmic_name[pmic_id]); - } - /* * According with : * https://github.com/projectceladon/hardware-intel-kernelflinger/blob/master/doc/fastboot.md @@ -1053,10 +1063,13 @@ struct camera_sensor_platform_data *gmin_camera_platform_data( enum atomisp_input_format csi_format, enum atomisp_bayer_order csi_bayer) { - struct gmin_subdev *gs = gmin_subdev_add(subdev); + struct gmin_subdev *gs; + u8 pmic_i2c_addr = gmin_detect_pmic(subdev); + gs = gmin_subdev_add(subdev); gs->csi_fmt = csi_format; gs->csi_bayer = csi_bayer; + gs->pwm_i2c_addr = pmic_i2c_addr; if (gs->pmc_clk) return &pmic_gmin_plat; -- cgit v1.2.3 From fecd8833cc480559a50bf2532254c2e4d3a07240 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 29 Jun 2020 12:57:36 +0200 Subject: media: atomisp: Use temporary variable for device in gmin_subdev_add() Use temporary variable for device in gmin_subdev_add(). While here, drop unused temporary variable for device in other places. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- .../staging/media/atomisp/pci/atomisp_gmin_platform.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index efd5e92ad7f6..dc34c7e0d845 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -514,19 +514,14 @@ static int gmin_detect_pmic(struct v4l2_subdev *subdev) static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) { struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct device *dev = &client->dev; struct acpi_device *adev; struct gmin_subdev *gs; acpi_handle handle; - struct device *dev; int i, ret, clock_num = -1; - if (!client) - return NULL; - - dev = &client->dev; - handle = ACPI_HANDLE(dev); - adev = ACPI_COMPANION(&client->dev); + adev = ACPI_COMPANION(dev); dev_info(&client->dev, "%s: ACPI detected it on bus ID=%s, HID=%s\n", __func__, acpi_device_bid(adev), acpi_device_hid(adev)); @@ -829,12 +824,8 @@ static int gmin_v1p8_ctrl(struct v4l2_subdev *subdev, int on) { struct gmin_subdev *gs = find_gmin_subdev(subdev); int ret; - struct device *dev; - struct i2c_client *client = v4l2_get_subdevdata(subdev); int value; - dev = &client->dev; - if (gs->v1p8_gpio >= 0) { pr_info("atomisp_gmin_platform: 1.8v power on GPIO %d\n", gs->v1p8_gpio); @@ -887,12 +878,8 @@ static int gmin_v2p8_ctrl(struct v4l2_subdev *subdev, int on) { struct gmin_subdev *gs = find_gmin_subdev(subdev); int ret; - struct device *dev; - struct i2c_client *client = v4l2_get_subdevdata(subdev); int value; - dev = &client->dev; - if (gs->v2p8_gpio >= 0) { pr_info("atomisp_gmin_platform: 2.8v power on GPIO %d\n", gs->v2p8_gpio); -- cgit v1.2.3 From 5cb30aed643545af0e6eb687eb4262e4e2583695 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 29 Jun 2020 12:57:37 +0200 Subject: media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add() Provide Gmin subdev as parameter to gmin_subdev_add() to avoid direct global variable usage. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- .../media/atomisp/pci/atomisp_gmin_platform.c | 51 ++++++++++------------ 1 file changed, 24 insertions(+), 27 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index dc34c7e0d845..e960e930b348 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -511,14 +511,13 @@ static int gmin_detect_pmic(struct v4l2_subdev *subdev) return pmic_i2c_addr; } -static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) +static int gmin_subdev_add(struct gmin_subdev *gs) { - struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct i2c_client *client = v4l2_get_subdevdata(gs->subdev); struct device *dev = &client->dev; struct acpi_device *adev; - struct gmin_subdev *gs; acpi_handle handle; - int i, ret, clock_num = -1; + int ret, clock_num = -1; handle = ACPI_HANDLE(dev); adev = ACPI_COMPANION(dev); @@ -526,17 +525,9 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) dev_info(&client->dev, "%s: ACPI detected it on bus ID=%s, HID=%s\n", __func__, acpi_device_bid(adev), acpi_device_hid(adev)); - for (i = 0; i < MAX_SUBDEVS && gmin_subdevs[i].subdev; i++) - ; - if (i >= MAX_SUBDEVS) - return NULL; - - gs = &gmin_subdevs[i]; - gs->subdev = subdev; - /*WA:CHT requires XTAL clock as PLL is not stable.*/ - gmin_subdevs[i].clock_src = gmin_get_var_int(dev, false, "ClkSrc", - VLV2_CLK_PLL_19P2MHZ); + gs->clock_src = gmin_get_var_int(dev, false, "ClkSrc", + VLV2_CLK_PLL_19P2MHZ); gs->csi_port = gmin_get_var_int(dev, false, "CsiPort", 0); gs->csi_lanes = gmin_get_var_int(dev, false, "CsiLanes", 1); @@ -596,8 +587,7 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) acpi_device_can_poweroff(adev)) { dev_info(dev, "gmin: power management provided via device PM\n"); - - return gs; + return 0; } /* @@ -630,7 +620,7 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) if (clock_num < 0 || clock_num > MAX_CLK_COUNT) { dev_err(dev, "Invalid clock number\n"); - return NULL; + return -EINVAL; } snprintf(gmin_pmc_clk_name, sizeof(gmin_pmc_clk_name), @@ -639,13 +629,8 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) gs->pmc_clk = devm_clk_get(dev, gmin_pmc_clk_name); if (IS_ERR(gs->pmc_clk)) { ret = PTR_ERR(gs->pmc_clk); - - dev_err(dev, - "Failed to get clk from %s : %d\n", - gmin_pmc_clk_name, - ret); - - return NULL; + dev_err(dev, "Failed to get clk from %s: %d\n", gmin_pmc_clk_name, ret); + return ret; } dev_info(dev, "Will use CLK%d (%s)\n", clock_num, gmin_pmc_clk_name); @@ -705,7 +690,7 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) break; } - return gs; + return 0; } static struct gmin_subdev *find_gmin_subdev(struct v4l2_subdev *subdev) @@ -718,6 +703,16 @@ static struct gmin_subdev *find_gmin_subdev(struct v4l2_subdev *subdev) return NULL; } +static struct gmin_subdev *find_free_gmin_subdev_slot(void) +{ + unsigned int i; + + for (i = 0; i < MAX_SUBDEVS; i++) + if (gmin_subdevs[i].subdev == NULL) + return &gmin_subdevs[i]; + return NULL; +} + static int axp_regulator_set(struct device *dev, struct gmin_subdev *gs, int sel_reg, u8 setting, int ctrl_reg, int shift, bool on) @@ -1050,14 +1045,16 @@ struct camera_sensor_platform_data *gmin_camera_platform_data( enum atomisp_input_format csi_format, enum atomisp_bayer_order csi_bayer) { - struct gmin_subdev *gs; u8 pmic_i2c_addr = gmin_detect_pmic(subdev); + struct gmin_subdev *gs; - gs = gmin_subdev_add(subdev); + gs = find_free_gmin_subdev_slot(); + gs->subdev = subdev; gs->csi_fmt = csi_format; gs->csi_bayer = csi_bayer; gs->pwm_i2c_addr = pmic_i2c_addr; + gmin_subdev_add(gs); if (gs->pmc_clk) return &pmic_gmin_plat; else -- cgit v1.2.3 From e8b4a890eddb95b8acc2073def0231ef0c77ceb0 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 29 Jun 2020 12:57:38 +0200 Subject: media: atomisp: Get rid of ACPI specifics in gmin_subdev_add() First of all ACPI HID is a part of the device name which is printed as a part of the dev_info(dev, ...); line. Second, since the only BID is left, it's a part of ACPI path, which can be printed via %pfw. Besides that, drop ACPI handle from atomisp_get_acpi_power() parameters. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index e960e930b348..0df46a1af5f0 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -423,12 +423,13 @@ static int gmin_i2c_write(struct device *dev, u16 i2c_addr, u8 reg, return ret; } -static int atomisp_get_acpi_power(struct device *dev, acpi_handle handle) +static int atomisp_get_acpi_power(struct device *dev) { char name[5]; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; struct acpi_buffer b_name = { sizeof(name), name }; union acpi_object *package, *element; + acpi_handle handle = ACPI_HANDLE(dev); acpi_handle rhandle; acpi_status status; int clock_num = -1; @@ -515,15 +516,10 @@ static int gmin_subdev_add(struct gmin_subdev *gs) { struct i2c_client *client = v4l2_get_subdevdata(gs->subdev); struct device *dev = &client->dev; - struct acpi_device *adev; - acpi_handle handle; + struct acpi_device *adev = ACPI_COMPANION(dev); int ret, clock_num = -1; - handle = ACPI_HANDLE(dev); - adev = ACPI_COMPANION(dev); - - dev_info(&client->dev, "%s: ACPI detected it on bus ID=%s, HID=%s\n", - __func__, acpi_device_bid(adev), acpi_device_hid(adev)); + dev_info(dev, "%s: ACPI path is %pfw\n", __func__, dev_fwnode(dev)); /*WA:CHT requires XTAL clock as PLL is not stable.*/ gs->clock_src = gmin_get_var_int(dev, false, "ClkSrc", @@ -612,7 +608,7 @@ static int gmin_subdev_add(struct gmin_subdev *gs) /* Try first to use ACPI to get the clock resource */ if (acpi_device_power_manageable(adev)) - clock_num = atomisp_get_acpi_power(dev, handle); + clock_num = atomisp_get_acpi_power(dev); /* Fall-back use EFI and/or DMI match */ if (clock_num < 0) -- cgit v1.2.3 From 3a0744603a042fc2dae70845923bce0e50d634fb Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 29 Jun 2020 12:57:39 +0200 Subject: media: atomisp: Clean up non-existing folders from Makefile Compiler is not happy about leftovers: cc1: warning: .../pci/hrt/: No such file or directory [-Wmissing-include-dirs] cc1: warning: .../pci/hive_isp_css_include/memory_access/: No such file or directory [-Wmissing-include-dirs] cc1: warning: .../pci/css_2400_system/hrt/: No such file or directory [-Wmissing-include-dirs] Drop them from Makefile. Signed-off-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/Makefile | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/staging/media/atomisp/Makefile b/drivers/staging/media/atomisp/Makefile index 9dc8072799e3..7b8288bbe119 100644 --- a/drivers/staging/media/atomisp/Makefile +++ b/drivers/staging/media/atomisp/Makefile @@ -182,7 +182,6 @@ INCLUDES += \ -I$(atomisp)/include/hmm/ \ -I$(atomisp)/include/mmu/ \ -I$(atomisp)/pci/ \ - -I$(atomisp)/pci/hrt/ \ -I$(atomisp)/pci/base/circbuf/interface/ \ -I$(atomisp)/pci/base/refcount/interface/ \ -I$(atomisp)/pci/camera/pipe/interface/ \ @@ -192,7 +191,6 @@ INCLUDES += \ -I$(atomisp)/pci/hive_isp_css_include/ \ -I$(atomisp)/pci/hive_isp_css_include/device_access/ \ -I$(atomisp)/pci/hive_isp_css_include/host/ \ - -I$(atomisp)/pci/hive_isp_css_include/memory_access/ \ -I$(atomisp)/pci/hive_isp_css_shared/ \ -I$(atomisp)/pci/hive_isp_css_shared/host/ \ -I$(atomisp)/pci/isp/kernels/ \ @@ -311,9 +309,7 @@ INCLUDES += \ -I$(atomisp)/pci/runtime/tagger/interface/ INCLUDES_byt += \ - -I$(atomisp)/pci/css_2400_system/ \ -I$(atomisp)/pci/css_2400_system/hive/ \ - -I$(atomisp)/pci/css_2400_system/hrt/ \ INCLUDES_cht += \ -I$(atomisp)/pci/css_2401_system/ \ @@ -321,7 +317,6 @@ INCLUDES_cht += \ -I$(atomisp)/pci/css_2401_system/hive/ \ -I$(atomisp)/pci/css_2401_system/hrt/ \ -# -I$(atomisp)/pci/css_2401_system/hrt/ \ # -I$(atomisp)/pci/css_2401_system/hive_isp_css_2401_system_generated/ \ DEFINES := -DHRT_HW -DHRT_ISP_CSS_CUSTOM_HOST -DHRT_USE_VIR_ADDRS -D__HOST__ -- cgit v1.2.3 From fb2595456d75d688305690fb555fe8d31b18f673 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 11 Jun 2020 16:08:31 +0200 Subject: media: atomisp: make const arrays static, makes object smaller Don't populate const arrays on the stack but instead make them static. Makes the object code smaller by 150 bytes. Before: text data bss dec hex filename 111083 23692 64 134839 20eb7 atomisp/pci/atomisp_compat_css20.o After: text data bss dec hex filename 110773 23852 64 134689 20e21 atomisp/pci/atomisp_compat_css20.o After: (gcc version 9.3.0, amd64) Signed-off-by: Colin Ian King Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_compat_css20.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c index 499916bc6aab..cccc5bfa1057 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c +++ b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c @@ -2414,13 +2414,13 @@ static void __configure_preview_pp_input(struct atomisp_sub_device *asd, struct ia_css_resolution *effective_res = &stream_config->input_config.effective_res; - const struct bayer_ds_factor bds_fct[] = {{2, 1}, {3, 2}, {5, 4} }; + static const struct bayer_ds_factor bds_fct[] = {{2, 1}, {3, 2}, {5, 4} }; /* * BZ201033: YUV decimation factor of 4 causes couple of rightmost * columns to be shaded. Remove this factor to work around the CSS bug. * const unsigned int yuv_dec_fct[] = {4, 2}; */ - const unsigned int yuv_dec_fct[] = { 2 }; + static const unsigned int yuv_dec_fct[] = { 2 }; unsigned int i; if (width == 0 && height == 0) @@ -2540,7 +2540,7 @@ static void __configure_video_pp_input(struct atomisp_sub_device *asd, struct ia_css_resolution *effective_res = &stream_config->input_config.effective_res; - const struct bayer_ds_factor bds_factors[] = { + static const struct bayer_ds_factor bds_factors[] = { {8, 1}, {6, 1}, {4, 1}, {3, 1}, {2, 1}, {3, 2} }; unsigned int i; -- cgit v1.2.3 From b6b415a80150ef712ab8d510cc7a8a299b88902e Mon Sep 17 00:00:00 2001 From: B K Karthik Date: Sun, 28 Jun 2020 06:38:33 +0200 Subject: media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue. Fixed a coding style issue. Signed-off-by: B K Karthik Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/i2c/atomisp-ov2680.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c index 90d125ba080f..c90730513438 100644 --- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c +++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c @@ -495,11 +495,11 @@ static int ov2680_h_flip(struct v4l2_subdev *sd, s32 value) ret = ov2680_read_reg(client, 1, OV2680_MIRROR_REG, &val); if (ret) return ret; - if (value) { + if (value) val |= OV2680_FLIP_MIRROR_BIT_ENABLE; - } else { + else val &= ~OV2680_FLIP_MIRROR_BIT_ENABLE; - } + ret = ov2680_write_reg(client, 1, OV2680_MIRROR_REG, val); if (ret) -- cgit v1.2.3 From cadfad870154e14f745ec845708bc17d166065f2 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Fri, 17 Jul 2020 16:53:55 -0700 Subject: x86/ioperm: Fix io bitmap invalidation on Xen PV tss_invalidate_io_bitmap() wasn't wired up properly through the pvop machinery, so the TSS and Xen's io bitmap would get out of sync whenever disabling a valid io bitmap. Add a new pvop for tss_invalidate_io_bitmap() to fix it. This is XSA-329. Fixes: 22fe5b0439dd ("x86/ioperm: Move TSS bitmap update to exit to user work") Signed-off-by: Andy Lutomirski Signed-off-by: Thomas Gleixner Reviewed-by: Juergen Gross Reviewed-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/d53075590e1f91c19f8af705059d3ff99424c020.1595030016.git.luto@kernel.org --- arch/x86/include/asm/io_bitmap.h | 16 ++++++++++++++++ arch/x86/include/asm/paravirt.h | 5 +++++ arch/x86/include/asm/paravirt_types.h | 1 + arch/x86/kernel/paravirt.c | 3 ++- arch/x86/kernel/process.c | 18 ++---------------- arch/x86/xen/enlighten_pv.c | 12 ++++++++++++ 6 files changed, 38 insertions(+), 17 deletions(-) diff --git a/arch/x86/include/asm/io_bitmap.h b/arch/x86/include/asm/io_bitmap.h index ac1a99ffbd8d..7f080f5c7def 100644 --- a/arch/x86/include/asm/io_bitmap.h +++ b/arch/x86/include/asm/io_bitmap.h @@ -19,12 +19,28 @@ struct task_struct; void io_bitmap_share(struct task_struct *tsk); void io_bitmap_exit(struct task_struct *tsk); +static inline void native_tss_invalidate_io_bitmap(void) +{ + /* + * Invalidate the I/O bitmap by moving io_bitmap_base outside the + * TSS limit so any subsequent I/O access from user space will + * trigger a #GP. + * + * This is correct even when VMEXIT rewrites the TSS limit + * to 0x67 as the only requirement is that the base points + * outside the limit. + */ + this_cpu_write(cpu_tss_rw.x86_tss.io_bitmap_base, + IO_BITMAP_OFFSET_INVALID); +} + void native_tss_update_io_bitmap(void); #ifdef CONFIG_PARAVIRT_XXL #include #else #define tss_update_io_bitmap native_tss_update_io_bitmap +#define tss_invalidate_io_bitmap native_tss_invalidate_io_bitmap #endif #else diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index 5ca5d297df75..3d2afecde50c 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -302,6 +302,11 @@ static inline void write_idt_entry(gate_desc *dt, int entry, const gate_desc *g) } #ifdef CONFIG_X86_IOPL_IOPERM +static inline void tss_invalidate_io_bitmap(void) +{ + PVOP_VCALL0(cpu.invalidate_io_bitmap); +} + static inline void tss_update_io_bitmap(void) { PVOP_VCALL0(cpu.update_io_bitmap); diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h index 732f62e04ddb..8dfcb2508e6d 100644 --- a/arch/x86/include/asm/paravirt_types.h +++ b/arch/x86/include/asm/paravirt_types.h @@ -141,6 +141,7 @@ struct pv_cpu_ops { void (*load_sp0)(unsigned long sp0); #ifdef CONFIG_X86_IOPL_IOPERM + void (*invalidate_io_bitmap)(void); void (*update_io_bitmap)(void); #endif diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 674a7d66d960..de2138ba38e5 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -324,7 +324,8 @@ struct paravirt_patch_template pv_ops = { .cpu.swapgs = native_swapgs, #ifdef CONFIG_X86_IOPL_IOPERM - .cpu.update_io_bitmap = native_tss_update_io_bitmap, + .cpu.invalidate_io_bitmap = native_tss_invalidate_io_bitmap, + .cpu.update_io_bitmap = native_tss_update_io_bitmap, #endif .cpu.start_context_switch = paravirt_nop, diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index f362ce0d5ac0..fe67dbd76e51 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -322,20 +322,6 @@ void arch_setup_new_exec(void) } #ifdef CONFIG_X86_IOPL_IOPERM -static inline void tss_invalidate_io_bitmap(struct tss_struct *tss) -{ - /* - * Invalidate the I/O bitmap by moving io_bitmap_base outside the - * TSS limit so any subsequent I/O access from user space will - * trigger a #GP. - * - * This is correct even when VMEXIT rewrites the TSS limit - * to 0x67 as the only requirement is that the base points - * outside the limit. - */ - tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET_INVALID; -} - static inline void switch_to_bitmap(unsigned long tifp) { /* @@ -346,7 +332,7 @@ static inline void switch_to_bitmap(unsigned long tifp) * user mode. */ if (tifp & _TIF_IO_BITMAP) - tss_invalidate_io_bitmap(this_cpu_ptr(&cpu_tss_rw)); + tss_invalidate_io_bitmap(); } static void tss_copy_io_bitmap(struct tss_struct *tss, struct io_bitmap *iobm) @@ -380,7 +366,7 @@ void native_tss_update_io_bitmap(void) u16 *base = &tss->x86_tss.io_bitmap_base; if (!test_thread_flag(TIF_IO_BITMAP)) { - tss_invalidate_io_bitmap(tss); + native_tss_invalidate_io_bitmap(); return; } diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index 0d68948c82ad..c46b9f2e732f 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -870,6 +870,17 @@ static void xen_load_sp0(unsigned long sp0) } #ifdef CONFIG_X86_IOPL_IOPERM +static void xen_invalidate_io_bitmap(void) +{ + struct physdev_set_iobitmap iobitmap = { + .bitmap = 0, + .nr_ports = 0, + }; + + native_tss_invalidate_io_bitmap(); + HYPERVISOR_physdev_op(PHYSDEVOP_set_iobitmap, &iobitmap); +} + static void xen_update_io_bitmap(void) { struct physdev_set_iobitmap iobitmap; @@ -1099,6 +1110,7 @@ static const struct pv_cpu_ops xen_cpu_ops __initconst = { .load_sp0 = xen_load_sp0, #ifdef CONFIG_X86_IOPL_IOPERM + .invalidate_io_bitmap = xen_invalidate_io_bitmap, .update_io_bitmap = xen_update_io_bitmap, #endif .io_delay = xen_io_delay, -- cgit v1.2.3 From 568e4e82128aac2c62c2c359ebebb6007fd794f9 Mon Sep 17 00:00:00 2001 From: Joonho Wohn Date: Sat, 18 Jul 2020 17:23:15 +0900 Subject: ALSA: hda/realtek: Fixed ALC298 sound bug by adding quirk for Samsung Notebook Pen S Fixed no headphone sound bug on laptop Samsung Notebook Pen S (950SBE-951SBE), by using existing patch in Linus' tree, commit 14425f1f521f (ALSA: hda/realtek: Add quirk for Samsung Notebook). This laptop uses the same ALC298 but different subsystem id 0x144dc812. I added SND_PCI_QUIRK at sound/pci/hda/patch_realtek.c Signed-off-by: Joonho Wohn Cc: Link: https://lore.kernel.org/r/CAHcbMh291aWDKiWSZoxXB4-Eru6OYRwGA4AVEdCZeYmVLo5ZxQ@mail.gmail.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1b06c4261248..1b2d8e56390a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7587,6 +7587,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x144d, 0xc169, "Samsung Notebook 9 Pen (NP930SBE-K01US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), SND_PCI_QUIRK(0x144d, 0xc176, "Samsung Notebook 9 Pro (NP930MBE-K04US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8), + SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC), -- cgit v1.2.3 From c66ef39eb27fe123ee05082b90eb2985c33c7715 Mon Sep 17 00:00:00 2001 From: "Maciej S. Szmigiero" Date: Sat, 18 Jul 2020 14:32:10 +0200 Subject: hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives It has been observed that Toshiba DT01ACA family drives have WRITE FPDMA QUEUED command timeouts and sometimes just freeze until power-cycled under heavy write loads when their temperature is getting polled in SCT mode. The SMART mode seems to be fine, though. Let's make sure we don't use SCT mode for these drives then. While only the 3 TB model was actually caught exhibiting the problem let's play safe here to avoid data corruption and extend the ban to the whole family. Fixes: 5b46903d8bf3 ("hwmon: Driver for disk and solid state drives with temperature sensors") Cc: stable@vger.kernel.org Signed-off-by: Maciej S. Szmigiero Link: https://lore.kernel.org/r/0cb2e7022b66c6d21d3f189a12a97878d0e7511b.1595075458.git.mail@maciej.szmigiero.name Signed-off-by: Guenter Roeck --- drivers/hwmon/drivetemp.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/drivers/hwmon/drivetemp.c b/drivers/hwmon/drivetemp.c index 0d4f3d97ffc6..72c760373957 100644 --- a/drivers/hwmon/drivetemp.c +++ b/drivers/hwmon/drivetemp.c @@ -285,6 +285,42 @@ static int drivetemp_get_scttemp(struct drivetemp_data *st, u32 attr, long *val) return err; } +static const char * const sct_avoid_models[] = { +/* + * These drives will have WRITE FPDMA QUEUED command timeouts and sometimes just + * freeze until power-cycled under heavy write loads when their temperature is + * getting polled in SCT mode. The SMART mode seems to be fine, though. + * + * While only the 3 TB model (DT01ACA3) was actually caught exhibiting the + * problem let's play safe here to avoid data corruption and ban the whole + * DT01ACAx family. + + * The models from this array are prefix-matched. + */ + "TOSHIBA DT01ACA", +}; + +static bool drivetemp_sct_avoid(struct drivetemp_data *st) +{ + struct scsi_device *sdev = st->sdev; + unsigned int ctr; + + if (!sdev->model) + return false; + + /* + * The "model" field contains just the raw SCSI INQUIRY response + * "product identification" field, which has a width of 16 bytes. + * This field is space-filled, but is NOT NULL-terminated. + */ + for (ctr = 0; ctr < ARRAY_SIZE(sct_avoid_models); ctr++) + if (!strncmp(sdev->model, sct_avoid_models[ctr], + strlen(sct_avoid_models[ctr]))) + return true; + + return false; +} + static int drivetemp_identify_sata(struct drivetemp_data *st) { struct scsi_device *sdev = st->sdev; @@ -326,6 +362,13 @@ static int drivetemp_identify_sata(struct drivetemp_data *st) /* bail out if this is not a SATA device */ if (!is_ata || !is_sata) return -ENODEV; + + if (have_sct && drivetemp_sct_avoid(st)) { + dev_notice(&sdev->sdev_gendev, + "will avoid using SCT for temperature monitoring\n"); + have_sct = false; + } + if (!have_sct) goto skip_sct; -- cgit v1.2.3 From 61710e437f2807e26a3402543bdbb7217a9c8620 Mon Sep 17 00:00:00 2001 From: Daniele Albano Date: Sat, 18 Jul 2020 14:15:16 -0600 Subject: io_uring: always allow drain/link/hardlink/async sqe flags We currently filter these for timeout_remove/async_cancel/files_update, but we only should be filtering for fixed file and buffer select. This also causes a second read of sqe->flags, which isn't needed. Just check req->flags for the relevant bits. This then allows these commands to be used in links, for example, like everything else. Signed-off-by: Daniele Albano Signed-off-by: Jens Axboe --- fs/io_uring.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 53232ac3da17..d99802ac166f 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -4737,7 +4737,9 @@ static int io_timeout_remove_prep(struct io_kiocb *req, { if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL)) return -EINVAL; - if (sqe->flags || sqe->ioprio || sqe->buf_index || sqe->len) + if (unlikely(req->flags & (REQ_F_FIXED_FILE | REQ_F_BUFFER_SELECT))) + return -EINVAL; + if (sqe->ioprio || sqe->buf_index || sqe->len) return -EINVAL; req->timeout.addr = READ_ONCE(sqe->addr); @@ -4915,8 +4917,9 @@ static int io_async_cancel_prep(struct io_kiocb *req, { if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL)) return -EINVAL; - if (sqe->flags || sqe->ioprio || sqe->off || sqe->len || - sqe->cancel_flags) + if (unlikely(req->flags & (REQ_F_FIXED_FILE | REQ_F_BUFFER_SELECT))) + return -EINVAL; + if (sqe->ioprio || sqe->off || sqe->len || sqe->cancel_flags) return -EINVAL; req->cancel.addr = READ_ONCE(sqe->addr); @@ -4934,7 +4937,9 @@ static int io_async_cancel(struct io_kiocb *req) static int io_files_update_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe) { - if (sqe->flags || sqe->ioprio || sqe->rw_flags) + if (unlikely(req->flags & (REQ_F_FIXED_FILE | REQ_F_BUFFER_SELECT))) + return -EINVAL; + if (sqe->ioprio || sqe->rw_flags) return -EINVAL; req->files_update.offset = READ_ONCE(sqe->off); -- cgit v1.2.3 From 52c6f42fed25683ee26cebe50ee7af006dfb9b29 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Jun 2020 20:52:12 +0200 Subject: media: atomisp: fix help message for ISP2401 selection I'm pretty sure I named this right, but it sounds that I ended doing something weird maybe while solving some conflict. So, fix the title of this config var. Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/media/atomisp/Kconfig b/drivers/staging/media/atomisp/Kconfig index f75765cb0fc8..f0b99a6db651 100644 --- a/drivers/staging/media/atomisp/Kconfig +++ b/drivers/staging/media/atomisp/Kconfig @@ -22,7 +22,7 @@ config VIDEO_ATOMISP module will be called atomisp config VIDEO_ATOMISP_ISP2401 - bool "VIDEO_ATOMISP_ISP2401" + bool "Use Intel Atom ISP on Cherrytail/Anniedale (ISP2401)" depends on VIDEO_ATOMISP help Enable support for Atom ISP2401-based boards. -- cgit v1.2.3 From d8ebd811415117ac86418d6b987381059bb3c6e5 Mon Sep 17 00:00:00 2001 From: Baidyanath Kundu Date: Wed, 1 Jul 2020 18:48:42 +0200 Subject: media: atomisp: Fix __func__ style warnings This patch fixes the checkpatch.pl warning: Prefer using '"%s...", __func__' to using '', this function's name, in a string Signed-off-by: Baidyanath Kundu Signed-off-by: Mauro Carvalho Chehab --- .../media/atomisp/pci/base/refcount/src/refcount.c | 28 +++++++++++----------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/base/refcount/src/refcount.c b/drivers/staging/media/atomisp/pci/base/refcount/src/refcount.c index cf02737cf8d4..a9c881631f4a 100644 --- a/drivers/staging/media/atomisp/pci/base/refcount/src/refcount.c +++ b/drivers/staging/media/atomisp/pci/base/refcount/src/refcount.c @@ -48,7 +48,7 @@ static struct ia_css_refcount_entry *refcount_find_entry(ia_css_ptr ptr, return NULL; if (!myrefcount.items) { ia_css_debug_dtrace(IA_CSS_DEBUG_ERROR, - "refcount_find_entry(): Ref count not initialized!\n"); + "%s(): Ref count not initialized!\n", __func__); return NULL; } @@ -73,12 +73,12 @@ int ia_css_refcount_init(uint32_t size) if (size == 0) { ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_init(): Size of 0 for Ref count init!\n"); + "%s(): Size of 0 for Ref count init!\n", __func__); return -EINVAL; } if (myrefcount.items) { ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_init(): Ref count is already initialized\n"); + "%s(): Ref count is already initialized\n", __func__); return -EINVAL; } myrefcount.items = @@ -99,7 +99,7 @@ void ia_css_refcount_uninit(void) u32 i; ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_uninit() entry\n"); + "%s() entry\n", __func__); for (i = 0; i < myrefcount.size; i++) { /* driver verifier tool has issues with &arr[i] and prefers arr + i; as these are actually equivalent @@ -120,7 +120,7 @@ void ia_css_refcount_uninit(void) myrefcount.items = NULL; myrefcount.size = 0; ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_uninit() leave\n"); + "%s() leave\n", __func__); } ia_css_ptr ia_css_refcount_increment(s32 id, ia_css_ptr ptr) @@ -133,7 +133,7 @@ ia_css_ptr ia_css_refcount_increment(s32 id, ia_css_ptr ptr) entry = refcount_find_entry(ptr, false); ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_increment(%x) 0x%x\n", id, ptr); + "%s(%x) 0x%x\n", __func__, id, ptr); if (!entry) { entry = refcount_find_entry(ptr, true); @@ -145,7 +145,7 @@ ia_css_ptr ia_css_refcount_increment(s32 id, ia_css_ptr ptr) if (entry->id != id) { ia_css_debug_dtrace(IA_CSS_DEBUG_ERROR, - "ia_css_refcount_increment(): Ref count IDS do not match!\n"); + "%s(): Ref count IDS do not match!\n", __func__); return mmgr_NULL; } @@ -165,7 +165,7 @@ bool ia_css_refcount_decrement(s32 id, ia_css_ptr ptr) struct ia_css_refcount_entry *entry; ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_decrement(%x) 0x%x\n", id, ptr); + "%s(%x) 0x%x\n", __func__, id, ptr); if (ptr == mmgr_NULL) return false; @@ -175,7 +175,7 @@ bool ia_css_refcount_decrement(s32 id, ia_css_ptr ptr) if (entry) { if (entry->id != id) { ia_css_debug_dtrace(IA_CSS_DEBUG_ERROR, - "ia_css_refcount_decrement(): Ref count IDS do not match!\n"); + "%s(): Ref count IDS do not match!\n", __func__); return false; } if (entry->count > 0) { @@ -225,8 +225,8 @@ void ia_css_refcount_clear(s32 id, clear_func clear_func_ptr) u32 count = 0; assert(clear_func_ptr); - ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, "ia_css_refcount_clear(%x)\n", - id); + ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, "%s(%x)\n", + __func__, id); for (i = 0; i < myrefcount.size; i++) { /* driver verifier tool has issues with &arr[i] @@ -236,14 +236,14 @@ void ia_css_refcount_clear(s32 id, clear_func clear_func_ptr) entry = myrefcount.items + i; if ((entry->data != mmgr_NULL) && (entry->id == id)) { ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_clear: %x: 0x%x\n", + "%s: %x: 0x%x\n", __func__, id, entry->data); if (clear_func_ptr) { /* clear using provided function */ clear_func_ptr(entry->data); } else { ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_clear: using hmm_free: no clear_func\n"); + "%s: using hmm_free: no clear_func\n", __func__); hmm_free(entry->data); } @@ -260,7 +260,7 @@ void ia_css_refcount_clear(s32 id, clear_func clear_func_ptr) } } ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_clear(%x): cleared %d\n", id, + "%s(%x): cleared %d\n", __func__, id, count); } -- cgit v1.2.3 From 3d81099c75a685d0e72cac58b96cc39a6784ff54 Mon Sep 17 00:00:00 2001 From: Nicolas Boichat Date: Fri, 10 Jul 2020 08:45:29 +0200 Subject: media: atomisp: Replace trace_printk by pr_info trace_printk should not be used in production code, replace it call with pr_info. Signed-off-by: Nicolas Boichat Acked-by: Greg Kroah-Hartman Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/hmm/hmm.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/hmm/hmm.c b/drivers/staging/media/atomisp/pci/hmm/hmm.c index 42fef1779862..2bd39b4939f1 100644 --- a/drivers/staging/media/atomisp/pci/hmm/hmm.c +++ b/drivers/staging/media/atomisp/pci/hmm/hmm.c @@ -735,11 +735,11 @@ ia_css_ptr hmm_host_vaddr_to_hrt_vaddr(const void *ptr) void hmm_show_mem_stat(const char *func, const int line) { - trace_printk("tol_cnt=%d usr_size=%d res_size=%d res_cnt=%d sys_size=%d dyc_thr=%d dyc_size=%d.\n", - hmm_mem_stat.tol_cnt, - hmm_mem_stat.usr_size, hmm_mem_stat.res_size, - hmm_mem_stat.res_cnt, hmm_mem_stat.sys_size, - hmm_mem_stat.dyc_thr, hmm_mem_stat.dyc_size); + pr_info("tol_cnt=%d usr_size=%d res_size=%d res_cnt=%d sys_size=%d dyc_thr=%d dyc_size=%d.\n", + hmm_mem_stat.tol_cnt, + hmm_mem_stat.usr_size, hmm_mem_stat.res_size, + hmm_mem_stat.res_cnt, hmm_mem_stat.sys_size, + hmm_mem_stat.dyc_thr, hmm_mem_stat.dyc_size); } void hmm_init_mem_stat(int res_pgnr, int dyc_en, int dyc_pgnr) -- cgit v1.2.3 From ac8284569e9746c474102aaa1618c40b225a698d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 14 Jul 2020 12:55:29 +0200 Subject: media: atomisp: Fix error code in ov5693_probe() If gmin_camera_platform_data() returns NULL then we should return a negative error instead of success. Fixes: 90ebe55ab886 ("media: staging: atomisp: Add driver prefix to Kconfig option and module names") Signed-off-by: Dan Carpenter Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c b/drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c index 97ab10bc45ca..e698b63d6cb7 100644 --- a/drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c +++ b/drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c @@ -1899,7 +1899,7 @@ static int ov5693_probe(struct i2c_client *client) { struct ov5693_device *dev; int i2c; - int ret = 0; + int ret; void *pdata; unsigned int i; @@ -1929,8 +1929,10 @@ static int ov5693_probe(struct i2c_client *client) pdata = gmin_camera_platform_data(&dev->sd, ATOMISP_INPUT_FORMAT_RAW_10, atomisp_bayer_order_bggr); - if (!pdata) + if (!pdata) { + ret = -EINVAL; goto out_free; + } ret = ov5693_s_config(&dev->sd, client->irq, pdata); if (ret) -- cgit v1.2.3 From ecf1b4ca97117201c5e41b0e8ac6cb3c9a49cd57 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 18 Jul 2020 09:18:10 +0200 Subject: media: atomisp: get rid of some unused static vars There are several static vars declared inside the system local headers. This causes lots of warnings when W=1. Remove the unused ones. Signed-off-by: Mauro Carvalho Chehab --- .../media/atomisp/pci/isp2400_system_local.h | 38 ---------------------- .../media/atomisp/pci/isp2401_system_local.h | 30 ----------------- 2 files changed, 68 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/isp2400_system_local.h b/drivers/staging/media/atomisp/pci/isp2400_system_local.h index 675b8e5bdcc1..f889b7bf8f2d 100644 --- a/drivers/staging/media/atomisp/pci/isp2400_system_local.h +++ b/drivers/staging/media/atomisp/pci/isp2400_system_local.h @@ -38,11 +38,6 @@ #define GP_FIFO_BASE ((hrt_address)0x0000000000090104) /* This is NOT a base address */ -/* DDR */ -static const hrt_address DDR_BASE[N_DDR_ID] = { - (hrt_address)0x0000000120000000ULL -}; - /* ISP */ static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { (hrt_address)0x0000000000020000ULL @@ -56,16 +51,6 @@ static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { (hrt_address)0x0000000000100000ULL }; -static const hrt_address ISP_VAMEM_BASE[N_VAMEM_ID] = { - (hrt_address)0x00000000001C0000ULL, - (hrt_address)0x00000000001D0000ULL, - (hrt_address)0x00000000001E0000ULL -}; - -static const hrt_address ISP_HMEM_BASE[N_HMEM_ID] = { - (hrt_address)0x00000000001F0000ULL -}; - /* SP */ static const hrt_address SP_CTRL_BASE[N_SP_ID] = { (hrt_address)0x0000000000010000ULL @@ -75,10 +60,6 @@ static const hrt_address SP_DMEM_BASE[N_SP_ID] = { (hrt_address)0x0000000000300000ULL }; -static const hrt_address SP_PMEM_BASE[N_SP_ID] = { - (hrt_address)0x00000000000B0000ULL -}; - /* MMU */ /* * MMU0_ID: The data MMU @@ -177,11 +158,6 @@ static const hrt_address RX_BASE[N_RX_ID] = { #define GP_FIFO_BASE ((hrt_address)0x00090104) /* This is NOT a base address */ -/* DDR : Attention, this value not defined in 32-bit */ -static const hrt_address DDR_BASE[N_DDR_ID] = { - (hrt_address)0x00000000UL -}; - /* ISP */ static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { (hrt_address)0x00020000UL @@ -195,16 +171,6 @@ static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { (hrt_address)0x100000UL }; -static const hrt_address ISP_VAMEM_BASE[N_VAMEM_ID] = { - (hrt_address)0xffffffffUL, - (hrt_address)0xffffffffUL, - (hrt_address)0xffffffffUL -}; - -static const hrt_address ISP_HMEM_BASE[N_HMEM_ID] = { - (hrt_address)0xffffffffUL -}; - /* SP */ static const hrt_address SP_CTRL_BASE[N_SP_ID] = { (hrt_address)0x00010000UL @@ -214,10 +180,6 @@ static const hrt_address SP_DMEM_BASE[N_SP_ID] = { (hrt_address)0x00300000UL }; -static const hrt_address SP_PMEM_BASE[N_SP_ID] = { - (hrt_address)0x000B0000UL -}; - /* MMU */ /* * MMU0_ID: The data MMU diff --git a/drivers/staging/media/atomisp/pci/isp2401_system_local.h b/drivers/staging/media/atomisp/pci/isp2401_system_local.h index b09f8faadb13..1bb01e627cd7 100644 --- a/drivers/staging/media/atomisp/pci/isp2401_system_local.h +++ b/drivers/staging/media/atomisp/pci/isp2401_system_local.h @@ -36,11 +36,6 @@ #define GP_FIFO_BASE ((hrt_address)0x0000000000090104) /* This is NOT a base address */ -/* DDR */ -static const hrt_address DDR_BASE[N_DDR_ID] = { - 0x0000000120000000ULL -}; - /* ISP */ static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { 0x0000000000020000ULL @@ -54,16 +49,6 @@ static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { 0x0000000000100000ULL }; -static const hrt_address ISP_VAMEM_BASE[N_VAMEM_ID] = { - 0x00000000001C0000ULL, - 0x00000000001D0000ULL, - 0x00000000001E0000ULL -}; - -static const hrt_address ISP_HMEM_BASE[N_HMEM_ID] = { - 0x00000000001F0000ULL -}; - /* SP */ static const hrt_address SP_CTRL_BASE[N_SP_ID] = { 0x0000000000010000ULL @@ -217,11 +202,6 @@ static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { #define GP_FIFO_BASE ((hrt_address)0x00090104) /* This is NOT a base address */ -/* DDR : Attention, this value not defined in 32-bit */ -static const hrt_address DDR_BASE[N_DDR_ID] = { - 0x00000000UL -}; - /* ISP */ static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { 0x00020000UL @@ -235,16 +215,6 @@ static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { 0xffffffffUL }; -static const hrt_address ISP_VAMEM_BASE[N_VAMEM_ID] = { - 0xffffffffUL, - 0xffffffffUL, - 0xffffffffUL -}; - -static const hrt_address ISP_HMEM_BASE[N_HMEM_ID] = { - 0xffffffffUL -}; - /* SP */ static const hrt_address SP_CTRL_BASE[N_SP_ID] = { 0x00010000UL -- cgit v1.2.3 From a6154805d0735bdd9149a2f44bb7433f3ef37ff9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 18 Jul 2020 09:30:56 +0200 Subject: media: atomisp: remove non-used 32-bits consts at system_local There is an abstraction at the code in order to support 32 or 64 bits address/data length. However, for all Atom chipsets supported by this version, the size is fixed. So, cleanup the mess, removing the uused code and placing the data sizes on a single place. The end goal is to completely remove those local/global headers, replacing them by some ISP-version dependent struct, in order for the driver to decide what version it would need in runtime. Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/hive_types.h | 24 +-- .../media/atomisp/pci/isp2400_system_global.h | 2 - .../media/atomisp/pci/isp2400_system_local.h | 131 ---------------- .../media/atomisp/pci/isp2401_system_global.h | 4 - .../media/atomisp/pci/isp2401_system_local.h | 173 --------------------- 5 files changed, 3 insertions(+), 331 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/hive_types.h b/drivers/staging/media/atomisp/pci/hive_types.h index addda9b81d7b..4b8a679fb672 100644 --- a/drivers/staging/media/atomisp/pci/hive_types.h +++ b/drivers/staging/media/atomisp/pci/hive_types.h @@ -52,32 +52,14 @@ typedef unsigned short hive_uint16; typedef unsigned int hive_uint32; typedef unsigned long long hive_uint64; -/* by default assume 32 bit master port (both data and address) */ -#ifndef HRT_DATA_WIDTH -#define HRT_DATA_WIDTH 32 -#endif -#ifndef HRT_ADDRESS_WIDTH -#define HRT_ADDRESS_WIDTH 32 -#endif - +#define HRT_DATA_WIDTH 32 +#define HRT_ADDRESS_WIDTH 64 #define HRT_DATA_BYTES (HRT_DATA_WIDTH / 8) #define HRT_ADDRESS_BYTES (HRT_ADDRESS_WIDTH / 8) +#define SIZEOF_HRT_REG (HRT_DATA_WIDTH >> 3) -#if HRT_DATA_WIDTH == 64 -typedef hive_uint64 hrt_data; -#elif HRT_DATA_WIDTH == 32 typedef hive_uint32 hrt_data; -#else -#error data width not supported -#endif - -#if HRT_ADDRESS_WIDTH == 64 typedef hive_uint64 hrt_address; -#elif HRT_ADDRESS_WIDTH == 32 -typedef hive_uint32 hrt_address; -#else -#error adddres width not supported -#endif /* use 64 bit addresses in simulation, where possible */ typedef hive_uint64 hive_sim_address; diff --git a/drivers/staging/media/atomisp/pci/isp2400_system_global.h b/drivers/staging/media/atomisp/pci/isp2400_system_global.h index d87ddf1d2fe9..3888793a31e2 100644 --- a/drivers/staging/media/atomisp/pci/isp2400_system_global.h +++ b/drivers/staging/media/atomisp/pci/isp2400_system_global.h @@ -75,8 +75,6 @@ * Semi global. "HRT" is accessible from SP, but the HRT types do not fully apply */ #define HRT_VADDRESS_WIDTH 32 -//#define HRT_ADDRESS_WIDTH 64 /* Surprise, this is a local property*/ -#define HRT_DATA_WIDTH 32 #define SIZEOF_HRT_REG (HRT_DATA_WIDTH >> 3) #define HIVE_ISP_CTRL_DATA_BYTES (HIVE_ISP_CTRL_DATA_WIDTH / 8) diff --git a/drivers/staging/media/atomisp/pci/isp2400_system_local.h b/drivers/staging/media/atomisp/pci/isp2400_system_local.h index f889b7bf8f2d..3c7dc180ffe6 100644 --- a/drivers/staging/media/atomisp/pci/isp2400_system_local.h +++ b/drivers/staging/media/atomisp/pci/isp2400_system_local.h @@ -24,17 +24,12 @@ #include "system_global.h" -/* HRT assumes 32 by default (see Linux/include/hive_types.h), overrule it in case it is different */ -#undef HRT_ADDRESS_WIDTH -#define HRT_ADDRESS_WIDTH 64 /* Surprise, this is a local property */ - /* This interface is deprecated */ #include "hive_types.h" /* * Cell specific address maps */ -#if HRT_ADDRESS_WIDTH == 64 #define GP_FIFO_BASE ((hrt_address)0x0000000000090104) /* This is NOT a base address */ @@ -154,130 +149,4 @@ static const hrt_address RX_BASE[N_RX_ID] = { (hrt_address)0x0000000000080100ULL }; -#elif HRT_ADDRESS_WIDTH == 32 - -#define GP_FIFO_BASE ((hrt_address)0x00090104) /* This is NOT a base address */ - -/* ISP */ -static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { - (hrt_address)0x00020000UL -}; - -static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { - (hrt_address)0x00200000UL -}; - -static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { - (hrt_address)0x100000UL -}; - -/* SP */ -static const hrt_address SP_CTRL_BASE[N_SP_ID] = { - (hrt_address)0x00010000UL -}; - -static const hrt_address SP_DMEM_BASE[N_SP_ID] = { - (hrt_address)0x00300000UL -}; - -/* MMU */ -/* - * MMU0_ID: The data MMU - * MMU1_ID: The icache MMU - */ -static const hrt_address MMU_BASE[N_MMU_ID] = { - (hrt_address)0x00070000UL, - (hrt_address)0x000A0000UL -}; - -/* DMA */ -static const hrt_address DMA_BASE[N_DMA_ID] = { - (hrt_address)0x00040000UL -}; - -/* IRQ */ -static const hrt_address IRQ_BASE[N_IRQ_ID] = { - (hrt_address)0x00000500UL, - (hrt_address)0x00030A00UL, - (hrt_address)0x0008C000UL, - (hrt_address)0x00090200UL -}; - -/* - (hrt_address)0x00000500UL}; - */ - -/* GDC */ -static const hrt_address GDC_BASE[N_GDC_ID] = { - (hrt_address)0x00050000UL, - (hrt_address)0x00060000UL -}; - -/* FIFO_MONITOR (not a subset of GP_DEVICE) */ -static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { - (hrt_address)0x00000000UL -}; - -/* -static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = { - (hrt_address)0x00000000UL}; - -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - (hrt_address)0x00090000UL}; -*/ - -/* GP_DEVICE (single base for all separate GP_REG instances) */ -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - (hrt_address)0x00000000UL -}; - -/*GP TIMER , all timer registers are inter-twined, - * so, having multiple base addresses for - * different timers does not help*/ -static const hrt_address GP_TIMER_BASE = - (hrt_address)0x00000600UL; - -/* GPIO */ -static const hrt_address GPIO_BASE[N_GPIO_ID] = { - (hrt_address)0x00000400UL -}; - -/* TIMED_CTRL */ -static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { - (hrt_address)0x00000100UL -}; - -/* INPUT_FORMATTER */ -static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { - (hrt_address)0x00030000UL, - (hrt_address)0x00030200UL, - (hrt_address)0x00030400UL -}; - -/* (hrt_address)0x00030600UL, */ /* memcpy() */ - -/* INPUT_SYSTEM */ -static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { - (hrt_address)0x00080000UL -}; - -/* (hrt_address)0x00081000UL, */ /* capture A */ -/* (hrt_address)0x00082000UL, */ /* capture B */ -/* (hrt_address)0x00083000UL, */ /* capture C */ -/* (hrt_address)0x00084000UL, */ /* Acquisition */ -/* (hrt_address)0x00085000UL, */ /* DMA */ -/* (hrt_address)0x00089000UL, */ /* ctrl */ -/* (hrt_address)0x0008A000UL, */ /* GP regs */ -/* (hrt_address)0x0008B000UL, */ /* FIFO */ -/* (hrt_address)0x0008C000UL, */ /* IRQ */ - -/* RX, the MIPI lane control regs start at offset 0 */ -static const hrt_address RX_BASE[N_RX_ID] = { - (hrt_address)0x00080100UL -}; - -#else -#error "system_local.h: HRT_ADDRESS_WIDTH must be one of {32,64}" -#endif - #endif /* __SYSTEM_LOCAL_H_INCLUDED__ */ diff --git a/drivers/staging/media/atomisp/pci/isp2401_system_global.h b/drivers/staging/media/atomisp/pci/isp2401_system_global.h index 8bb2a956f983..b4a6976d7eab 100644 --- a/drivers/staging/media/atomisp/pci/isp2401_system_global.h +++ b/drivers/staging/media/atomisp/pci/isp2401_system_global.h @@ -85,11 +85,7 @@ * the HRT types do not fully apply */ #define HRT_VADDRESS_WIDTH 32 -/* Surprise, this is a local property*/ -/*#define HRT_ADDRESS_WIDTH 64 */ -#define HRT_DATA_WIDTH 32 -#define SIZEOF_HRT_REG (HRT_DATA_WIDTH >> 3) #define HIVE_ISP_CTRL_DATA_BYTES (HIVE_ISP_CTRL_DATA_WIDTH / 8) /* The main bus connecting all devices */ diff --git a/drivers/staging/media/atomisp/pci/isp2401_system_local.h b/drivers/staging/media/atomisp/pci/isp2401_system_local.h index 1bb01e627cd7..d60591e04b61 100644 --- a/drivers/staging/media/atomisp/pci/isp2401_system_local.h +++ b/drivers/staging/media/atomisp/pci/isp2401_system_local.h @@ -24,15 +24,12 @@ #include "system_global.h" -#define HRT_ADDRESS_WIDTH 64 /* Surprise, this is a local property */ - /* This interface is deprecated */ #include "hive_types.h" /* * Cell specific address maps */ -#if HRT_ADDRESS_WIDTH == 64 #define GP_FIFO_BASE ((hrt_address)0x0000000000090104) /* This is NOT a base address */ @@ -198,175 +195,5 @@ static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { 0x00000000000C2C00ULL, /* stream2mmio controller B */ 0x00000000000C4C00ULL /* stream2mmio controller C */ }; -#elif HRT_ADDRESS_WIDTH == 32 - -#define GP_FIFO_BASE ((hrt_address)0x00090104) /* This is NOT a base address */ - -/* ISP */ -static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { - 0x00020000UL -}; - -static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { - 0xffffffffUL -}; - -static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { - 0xffffffffUL -}; - -/* SP */ -static const hrt_address SP_CTRL_BASE[N_SP_ID] = { - 0x00010000UL -}; - -static const hrt_address SP_DMEM_BASE[N_SP_ID] = { - 0x00300000UL -}; - -/* MMU */ -/* - * MMU0_ID: The data MMU - * MMU1_ID: The icache MMU - */ -static const hrt_address MMU_BASE[N_MMU_ID] = { - 0x00070000UL, - 0x000A0000UL -}; - -/* DMA */ -static const hrt_address DMA_BASE[N_DMA_ID] = { - 0x00040000UL -}; - -static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { - 0x000CA000UL -}; - -/* IRQ */ -static const hrt_address IRQ_BASE[N_IRQ_ID] = { - 0x00000500UL, - 0x00030A00UL, - 0x0008C000UL, - 0x00090200UL -}; - -/* - 0x00000500UL}; - */ - -/* GDC */ -static const hrt_address GDC_BASE[N_GDC_ID] = { - 0x00050000UL, - 0x00060000UL -}; - -/* FIFO_MONITOR (not a subset of GP_DEVICE) */ -static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { - 0x00000000UL -}; - -/* -static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = { - 0x00000000UL}; - -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - 0x00090000UL}; -*/ - -/* GP_DEVICE (single base for all separate GP_REG instances) */ -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - 0x00000000UL -}; - -/*GP TIMER , all timer registers are inter-twined, - * so, having multiple base addresses for - * different timers does not help*/ -static const hrt_address GP_TIMER_BASE = - (hrt_address)0x00000600UL; -/* GPIO */ -static const hrt_address GPIO_BASE[N_GPIO_ID] = { - 0x00000400UL -}; - -/* TIMED_CTRL */ -static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { - 0x00000100UL -}; - -/* INPUT_FORMATTER */ -static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { - 0x00030000UL, - 0x00030200UL, - 0x00030400UL -}; - -/* 0x00030600UL, */ /* memcpy() */ - -/* INPUT_SYSTEM */ -static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { - 0x00080000UL -}; - -/* 0x00081000UL, */ /* capture A */ -/* 0x00082000UL, */ /* capture B */ -/* 0x00083000UL, */ /* capture C */ -/* 0x00084000UL, */ /* Acquisition */ -/* 0x00085000UL, */ /* DMA */ -/* 0x00089000UL, */ /* ctrl */ -/* 0x0008A000UL, */ /* GP regs */ -/* 0x0008B000UL, */ /* FIFO */ -/* 0x0008C000UL, */ /* IRQ */ - -/* RX, the MIPI lane control regs start at offset 0 */ -static const hrt_address RX_BASE[N_RX_ID] = { - 0x00080100UL -}; - -/* IBUF_CTRL, part of the Input System 2401 */ -static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { - 0x000C1800UL, /* ibuf controller A */ - 0x000C3800UL, /* ibuf controller B */ - 0x000C5800UL /* ibuf controller C */ -}; - -/* ISYS IRQ Controllers, part of the Input System 2401 */ -static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { - 0x000C1400ULL, /* port a */ - 0x000C3400ULL, /* port b */ - 0x000C5400ULL /* port c */ -}; - -/* CSI FE, part of the Input System 2401 */ -static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { - 0x000C0400UL, /* csi fe controller A */ - 0x000C2400UL, /* csi fe controller B */ - 0x000C4400UL /* csi fe controller C */ -}; - -/* CSI BE, part of the Input System 2401 */ -static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { - 0x000C0800UL, /* csi be controller A */ - 0x000C2800UL, /* csi be controller B */ - 0x000C4800UL /* csi be controller C */ -}; - -/* PIXEL Generator, part of the Input System 2401 */ -static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { - 0x000C1000UL, /* pixel gen controller A */ - 0x000C3000UL, /* pixel gen controller B */ - 0x000C5000UL /* pixel gen controller C */ -}; - -/* Stream2MMIO, part of the Input System 2401 */ -static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { - 0x000C0C00UL, /* stream2mmio controller A */ - 0x000C2C00UL, /* stream2mmio controller B */ - 0x000C4C00UL /* stream2mmio controller C */ -}; - -#else -#error "system_local.h: HRT_ADDRESS_WIDTH must be one of {32,64}" -#endif #endif /* __SYSTEM_LOCAL_H_INCLUDED__ */ -- cgit v1.2.3 From 4b28ded7634cbfc37c224ae20423924e43580f3b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 18 Jul 2020 10:26:26 +0200 Subject: media: atomisp: move global stuff into a common header Right now, there are two versions of system_global.h headers. Both share a lot of common code. There are some ISP2401 specific types on one of the headers, but it doesn't conflict with the ISP2400 ones. Also, the common code is identical. So, remove code duplication by moving such code into a common header. Signed-off-by: Mauro Carvalho Chehab --- .../media/atomisp/pci/isp2400_system_global.h | 300 --------------- .../media/atomisp/pci/isp2400_system_local.h | 3 - .../media/atomisp/pci/isp2401_system_global.h | 406 +-------------------- .../media/atomisp/pci/isp2401_system_local.h | 3 - drivers/staging/media/atomisp/pci/sh_css.c | 9 +- drivers/staging/media/atomisp/pci/system_global.h | 395 ++++++++++++++++++++ drivers/staging/media/atomisp/pci/system_local.h | 1 - 7 files changed, 403 insertions(+), 714 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/isp2400_system_global.h b/drivers/staging/media/atomisp/pci/isp2400_system_global.h index 3888793a31e2..74fff465e8e8 100644 --- a/drivers/staging/media/atomisp/pci/isp2400_system_global.h +++ b/drivers/staging/media/atomisp/pci/isp2400_system_global.h @@ -13,304 +13,4 @@ * more details. */ -#ifndef __SYSTEM_GLOBAL_H_INCLUDED__ -#define __SYSTEM_GLOBAL_H_INCLUDED__ - -#include -#include - -/* - * The longest allowed (uninteruptible) bus transfer, does not - * take stalling into account - */ -#define HIVE_ISP_MAX_BURST_LENGTH 1024 - -/* - * Maximum allowed burst length in words for the ISP DMA - */ -#define ISP_DMA_MAX_BURST_LENGTH 128 - -/* - * Create a list of HAS and IS properties that defines the system - * - * The configuration assumes the following - * - The system is hetereogeneous; Multiple cells and devices classes - * - The cell and device instances are homogeneous, each device type - * belongs to the same class - * - Device instances supporting a subset of the class capabilities are - * allowed - * - * We could manage different device classes through the enumerated - * lists (C) or the use of classes (C++), but that is presently not - * fully supported - * - * N.B. the 3 input formatters are of 2 different classess - */ - #define USE_INPUT_SYSTEM_VERSION_2 - -#define HAS_MMU_VERSION_2 -#define HAS_DMA_VERSION_2 -#define HAS_GDC_VERSION_2 -#define HAS_VAMEM_VERSION_2 -#define HAS_HMEM_VERSION_1 -#define HAS_BAMEM_VERSION_2 -#define HAS_IRQ_VERSION_2 -#define HAS_IRQ_MAP_VERSION_2 -#define HAS_INPUT_FORMATTER_VERSION_2 -/* 2401: HAS_INPUT_SYSTEM_VERSION_2401 */ -#define HAS_INPUT_SYSTEM_VERSION_2 -#define HAS_BUFFERED_SENSOR -#define HAS_FIFO_MONITORS_VERSION_2 -/* #define HAS_GP_REGS_VERSION_2 */ -#define HAS_GP_DEVICE_VERSION_2 -#define HAS_GPIO_VERSION_1 -#define HAS_TIMED_CTRL_VERSION_1 -#define HAS_RX_VERSION_2 - -#define DMA_DDR_TO_VAMEM_WORKAROUND -#define DMA_DDR_TO_HMEM_WORKAROUND - -/* - * Semi global. "HRT" is accessible from SP, but the HRT types do not fully apply - */ -#define HRT_VADDRESS_WIDTH 32 - -#define SIZEOF_HRT_REG (HRT_DATA_WIDTH >> 3) -#define HIVE_ISP_CTRL_DATA_BYTES (HIVE_ISP_CTRL_DATA_WIDTH / 8) - -/* The main bus connecting all devices */ -#define HRT_BUS_WIDTH HIVE_ISP_CTRL_DATA_WIDTH -#define HRT_BUS_BYTES HIVE_ISP_CTRL_DATA_BYTES - -/* per-frame parameter handling support */ -#define SH_CSS_ENABLE_PER_FRAME_PARAMS - -typedef u32 hrt_bus_align_t; - -/* - * Enumerate the devices, device access through the API is by ID, through the DLI by address - * The enumerator terminators are used to size the wiring arrays and as an exception value. - */ -typedef enum { - DDR0_ID = 0, - N_DDR_ID -} ddr_ID_t; - -typedef enum { - ISP0_ID = 0, - N_ISP_ID -} isp_ID_t; - -typedef enum { - SP0_ID = 0, - N_SP_ID -} sp_ID_t; - -typedef enum { - MMU0_ID = 0, - MMU1_ID, - N_MMU_ID -} mmu_ID_t; - -typedef enum { - DMA0_ID = 0, - N_DMA_ID -} dma_ID_t; - -typedef enum { - GDC0_ID = 0, - GDC1_ID, - N_GDC_ID -} gdc_ID_t; - -#define N_GDC_ID_CPP 2 // this extra define is needed because we want to use it also in the preprocessor, and that doesn't work with enums. - -typedef enum { - VAMEM0_ID = 0, - VAMEM1_ID, - VAMEM2_ID, - N_VAMEM_ID -} vamem_ID_t; - -typedef enum { - BAMEM0_ID = 0, - N_BAMEM_ID -} bamem_ID_t; - -typedef enum { - HMEM0_ID = 0, - N_HMEM_ID -} hmem_ID_t; - -/* -typedef enum { - IRQ0_ID = 0, - N_IRQ_ID -} irq_ID_t; -*/ - -typedef enum { - IRQ0_ID = 0, // GP IRQ block - IRQ1_ID, // Input formatter - IRQ2_ID, // input system - IRQ3_ID, // input selector - N_IRQ_ID -} irq_ID_t; - -typedef enum { - FIFO_MONITOR0_ID = 0, - N_FIFO_MONITOR_ID -} fifo_monitor_ID_t; - -/* - * Deprecated: Since all gp_reg instances are different - * and put in the address maps of other devices we cannot - * enumerate them as that assumes the instrances are the - * same. - * - * We define a single GP_DEVICE containing all gp_regs - * w.r.t. a single base address - * -typedef enum { - GP_REGS0_ID = 0, - N_GP_REGS_ID -} gp_regs_ID_t; - */ -typedef enum { - GP_DEVICE0_ID = 0, - N_GP_DEVICE_ID -} gp_device_ID_t; - -typedef enum { - GP_TIMER0_ID = 0, - GP_TIMER1_ID, - GP_TIMER2_ID, - GP_TIMER3_ID, - GP_TIMER4_ID, - GP_TIMER5_ID, - GP_TIMER6_ID, - GP_TIMER7_ID, - N_GP_TIMER_ID -} gp_timer_ID_t; - -typedef enum { - GPIO0_ID = 0, - N_GPIO_ID -} gpio_ID_t; - -typedef enum { - TIMED_CTRL0_ID = 0, - N_TIMED_CTRL_ID -} timed_ctrl_ID_t; - -typedef enum { - INPUT_FORMATTER0_ID = 0, - INPUT_FORMATTER1_ID, - INPUT_FORMATTER2_ID, - INPUT_FORMATTER3_ID, - N_INPUT_FORMATTER_ID -} input_formatter_ID_t; - -/* The IF RST is outside the IF */ -#define INPUT_FORMATTER0_SRST_OFFSET 0x0824 -#define INPUT_FORMATTER1_SRST_OFFSET 0x0624 -#define INPUT_FORMATTER2_SRST_OFFSET 0x0424 -#define INPUT_FORMATTER3_SRST_OFFSET 0x0224 - -#define INPUT_FORMATTER0_SRST_MASK 0x0001 -#define INPUT_FORMATTER1_SRST_MASK 0x0002 -#define INPUT_FORMATTER2_SRST_MASK 0x0004 -#define INPUT_FORMATTER3_SRST_MASK 0x0008 - -typedef enum { - INPUT_SYSTEM0_ID = 0, - N_INPUT_SYSTEM_ID -} input_system_ID_t; - -typedef enum { - RX0_ID = 0, - N_RX_ID -} rx_ID_t; - -enum mipi_port_id { - MIPI_PORT0_ID = 0, - MIPI_PORT1_ID, - MIPI_PORT2_ID, - N_MIPI_PORT_ID -}; - -#define N_RX_CHANNEL_ID 4 - -/* Generic port enumeration with an internal port type ID */ -typedef enum { - CSI_PORT0_ID = 0, - CSI_PORT1_ID, - CSI_PORT2_ID, - TPG_PORT0_ID, - PRBS_PORT0_ID, - FIFO_PORT0_ID, - MEMORY_PORT0_ID, - N_INPUT_PORT_ID -} input_port_ID_t; - -typedef enum { - CAPTURE_UNIT0_ID = 0, - CAPTURE_UNIT1_ID, - CAPTURE_UNIT2_ID, - ACQUISITION_UNIT0_ID, - DMA_UNIT0_ID, - CTRL_UNIT0_ID, - GPREGS_UNIT0_ID, - FIFO_UNIT0_ID, - IRQ_UNIT0_ID, - N_SUB_SYSTEM_ID -} sub_system_ID_t; - -#define N_CAPTURE_UNIT_ID 3 -#define N_ACQUISITION_UNIT_ID 1 -#define N_CTRL_UNIT_ID 1 - -enum ia_css_isp_memories { - IA_CSS_ISP_PMEM0 = 0, - IA_CSS_ISP_DMEM0, - IA_CSS_ISP_VMEM0, - IA_CSS_ISP_VAMEM0, - IA_CSS_ISP_VAMEM1, - IA_CSS_ISP_VAMEM2, - IA_CSS_ISP_HMEM0, - IA_CSS_SP_DMEM0, - IA_CSS_DDR, - N_IA_CSS_MEMORIES -}; - -#define IA_CSS_NUM_MEMORIES 9 -/* For driver compatibility */ -#define N_IA_CSS_ISP_MEMORIES IA_CSS_NUM_MEMORIES -#define IA_CSS_NUM_ISP_MEMORIES IA_CSS_NUM_MEMORIES - -#if 0 -typedef enum { - dev_chn, /* device channels, external resource */ - ext_mem, /* external memories */ - int_mem, /* internal memories */ - int_chn /* internal channels, user defined */ -} resource_type_t; - -/* if this enum is extended with other memory resources, pls also extend the function resource_to_memptr() */ -typedef enum { - vied_nci_dev_chn_dma_ext0, - int_mem_vmem0, - int_mem_dmem0 -} resource_id_t; - -/* enum listing the different memories within a program group. - This enum is used in the mem_ptr_t type */ -typedef enum { - buf_mem_invalid = 0, - buf_mem_vmem_prog0, - buf_mem_dmem_prog0 -} buf_mem_t; - -#endif -#endif /* __SYSTEM_GLOBAL_H_INCLUDED__ */ diff --git a/drivers/staging/media/atomisp/pci/isp2400_system_local.h b/drivers/staging/media/atomisp/pci/isp2400_system_local.h index 3c7dc180ffe6..fb6355c7e1a3 100644 --- a/drivers/staging/media/atomisp/pci/isp2400_system_local.h +++ b/drivers/staging/media/atomisp/pci/isp2400_system_local.h @@ -24,9 +24,6 @@ #include "system_global.h" -/* This interface is deprecated */ -#include "hive_types.h" - /* * Cell specific address maps */ diff --git a/drivers/staging/media/atomisp/pci/isp2401_system_global.h b/drivers/staging/media/atomisp/pci/isp2401_system_global.h index b4a6976d7eab..27cd2535bab8 100644 --- a/drivers/staging/media/atomisp/pci/isp2401_system_global.h +++ b/drivers/staging/media/atomisp/pci/isp2401_system_global.h @@ -13,411 +13,7 @@ * more details. */ -#ifndef __SYSTEM_GLOBAL_H_INCLUDED__ -#define __SYSTEM_GLOBAL_H_INCLUDED__ - -#include -#include - -/* - * The longest allowed (uninteruptible) bus transfer, does not - * take stalling into account - */ -#define HIVE_ISP_MAX_BURST_LENGTH 1024 - -/* - * Maximum allowed burst length in words for the ISP DMA - * This value is set to 2 to prevent the ISP DMA from blocking - * the bus for too long; as the input system can only buffer - * 2 lines on Moorefield and Cherrytrail, the input system buffers - * may overflow if blocked for too long (BZ 2726). - */ -#define ISP_DMA_MAX_BURST_LENGTH 2 - -/* - * Create a list of HAS and IS properties that defines the system - * - * The configuration assumes the following - * - The system is hetereogeneous; Multiple cells and devices classes - * - The cell and device instances are homogeneous, each device type - * belongs to the same class - * - Device instances supporting a subset of the class capabilities are - * allowed - * - * We could manage different device classes through the enumerated - * lists (C) or the use of classes (C++), but that is presently not - * fully supported - * - * N.B. the 3 input formatters are of 2 different classess - */ - +#define HAS_NO_INPUT_FORMATTER #define USE_INPUT_SYSTEM_VERSION_2401 - -#define HAS_MMU_VERSION_2 -#define HAS_DMA_VERSION_2 -#define HAS_GDC_VERSION_2 -#define HAS_VAMEM_VERSION_2 -#define HAS_HMEM_VERSION_1 -#define HAS_BAMEM_VERSION_2 -#define HAS_IRQ_VERSION_2 -#define HAS_IRQ_MAP_VERSION_2 -#define HAS_INPUT_FORMATTER_VERSION_2 -/* 2401: HAS_INPUT_SYSTEM_VERSION_3 */ -/* 2400: HAS_INPUT_SYSTEM_VERSION_2 */ -#define HAS_INPUT_SYSTEM_VERSION_2 #define HAS_INPUT_SYSTEM_VERSION_2401 -#define HAS_BUFFERED_SENSOR -#define HAS_FIFO_MONITORS_VERSION_2 -/* #define HAS_GP_REGS_VERSION_2 */ -#define HAS_GP_DEVICE_VERSION_2 -#define HAS_GPIO_VERSION_1 -#define HAS_TIMED_CTRL_VERSION_1 -#define HAS_RX_VERSION_2 -#define HAS_NO_INPUT_FORMATTER -/*#define HAS_NO_PACKED_RAW_PIXELS*/ -/*#define HAS_NO_DVS_6AXIS_CONFIG_UPDATE*/ - -#define DMA_DDR_TO_VAMEM_WORKAROUND -#define DMA_DDR_TO_HMEM_WORKAROUND - -/* - * Semi global. "HRT" is accessible from SP, but - * the HRT types do not fully apply - */ -#define HRT_VADDRESS_WIDTH 32 - -#define HIVE_ISP_CTRL_DATA_BYTES (HIVE_ISP_CTRL_DATA_WIDTH / 8) - -/* The main bus connecting all devices */ -#define HRT_BUS_WIDTH HIVE_ISP_CTRL_DATA_WIDTH -#define HRT_BUS_BYTES HIVE_ISP_CTRL_DATA_BYTES - #define CSI2P_DISABLE_ISYS2401_ONLINE_MODE - -/* per-frame parameter handling support */ -#define SH_CSS_ENABLE_PER_FRAME_PARAMS - -typedef u32 hrt_bus_align_t; - -/* - * Enumerate the devices, device access through the API is by ID, - * through the DLI by address. The enumerator terminators are used - * to size the wiring arrays and as an exception value. - */ -typedef enum { - DDR0_ID = 0, - N_DDR_ID -} ddr_ID_t; - -typedef enum { - ISP0_ID = 0, - N_ISP_ID -} isp_ID_t; - -typedef enum { - SP0_ID = 0, - N_SP_ID -} sp_ID_t; - -typedef enum { - MMU0_ID = 0, - MMU1_ID, - N_MMU_ID -} mmu_ID_t; - -typedef enum { - DMA0_ID = 0, - N_DMA_ID -} dma_ID_t; - -typedef enum { - GDC0_ID = 0, - GDC1_ID, - N_GDC_ID -} gdc_ID_t; - -/* this extra define is needed because we want to use it also - in the preprocessor, and that doesn't work with enums. - */ -#define N_GDC_ID_CPP 2 - -typedef enum { - VAMEM0_ID = 0, - VAMEM1_ID, - VAMEM2_ID, - N_VAMEM_ID -} vamem_ID_t; - -typedef enum { - BAMEM0_ID = 0, - N_BAMEM_ID -} bamem_ID_t; - -typedef enum { - HMEM0_ID = 0, - N_HMEM_ID -} hmem_ID_t; - -typedef enum { - ISYS_IRQ0_ID = 0, /* port a */ - ISYS_IRQ1_ID, /* port b */ - ISYS_IRQ2_ID, /* port c */ - N_ISYS_IRQ_ID -} isys_irq_ID_t; - -typedef enum { - IRQ0_ID = 0, /* GP IRQ block */ - IRQ1_ID, /* Input formatter */ - IRQ2_ID, /* input system */ - IRQ3_ID, /* input selector */ - N_IRQ_ID -} irq_ID_t; - -typedef enum { - FIFO_MONITOR0_ID = 0, - N_FIFO_MONITOR_ID -} fifo_monitor_ID_t; - -/* - * Deprecated: Since all gp_reg instances are different - * and put in the address maps of other devices we cannot - * enumerate them as that assumes the instrances are the - * same. - * - * We define a single GP_DEVICE containing all gp_regs - * w.r.t. a single base address - * -typedef enum { - GP_REGS0_ID = 0, - N_GP_REGS_ID -} gp_regs_ID_t; - */ -typedef enum { - GP_DEVICE0_ID = 0, - N_GP_DEVICE_ID -} gp_device_ID_t; - -typedef enum { - GP_TIMER0_ID = 0, - GP_TIMER1_ID, - GP_TIMER2_ID, - GP_TIMER3_ID, - GP_TIMER4_ID, - GP_TIMER5_ID, - GP_TIMER6_ID, - GP_TIMER7_ID, - N_GP_TIMER_ID -} gp_timer_ID_t; - -typedef enum { - GPIO0_ID = 0, - N_GPIO_ID -} gpio_ID_t; - -typedef enum { - TIMED_CTRL0_ID = 0, - N_TIMED_CTRL_ID -} timed_ctrl_ID_t; - -typedef enum { - INPUT_FORMATTER0_ID = 0, - INPUT_FORMATTER1_ID, - INPUT_FORMATTER2_ID, - INPUT_FORMATTER3_ID, - N_INPUT_FORMATTER_ID -} input_formatter_ID_t; - -/* The IF RST is outside the IF */ -#define INPUT_FORMATTER0_SRST_OFFSET 0x0824 -#define INPUT_FORMATTER1_SRST_OFFSET 0x0624 -#define INPUT_FORMATTER2_SRST_OFFSET 0x0424 -#define INPUT_FORMATTER3_SRST_OFFSET 0x0224 - -#define INPUT_FORMATTER0_SRST_MASK 0x0001 -#define INPUT_FORMATTER1_SRST_MASK 0x0002 -#define INPUT_FORMATTER2_SRST_MASK 0x0004 -#define INPUT_FORMATTER3_SRST_MASK 0x0008 - -typedef enum { - INPUT_SYSTEM0_ID = 0, - N_INPUT_SYSTEM_ID -} input_system_ID_t; - -typedef enum { - RX0_ID = 0, - N_RX_ID -} rx_ID_t; - -enum mipi_port_id { - MIPI_PORT0_ID = 0, - MIPI_PORT1_ID, - MIPI_PORT2_ID, - N_MIPI_PORT_ID -}; - -#define N_RX_CHANNEL_ID 4 - -/* Generic port enumeration with an internal port type ID */ -typedef enum { - CSI_PORT0_ID = 0, - CSI_PORT1_ID, - CSI_PORT2_ID, - TPG_PORT0_ID, - PRBS_PORT0_ID, - FIFO_PORT0_ID, - MEMORY_PORT0_ID, - N_INPUT_PORT_ID -} input_port_ID_t; - -typedef enum { - CAPTURE_UNIT0_ID = 0, - CAPTURE_UNIT1_ID, - CAPTURE_UNIT2_ID, - ACQUISITION_UNIT0_ID, - DMA_UNIT0_ID, - CTRL_UNIT0_ID, - GPREGS_UNIT0_ID, - FIFO_UNIT0_ID, - IRQ_UNIT0_ID, - N_SUB_SYSTEM_ID -} sub_system_ID_t; - -#define N_CAPTURE_UNIT_ID 3 -#define N_ACQUISITION_UNIT_ID 1 -#define N_CTRL_UNIT_ID 1 - -/* - * Input-buffer Controller. - */ -typedef enum { - IBUF_CTRL0_ID = 0, /* map to ISYS2401_IBUF_CNTRL_A */ - IBUF_CTRL1_ID, /* map to ISYS2401_IBUF_CNTRL_B */ - IBUF_CTRL2_ID, /* map ISYS2401_IBUF_CNTRL_C */ - N_IBUF_CTRL_ID -} ibuf_ctrl_ID_t; -/* end of Input-buffer Controller */ - -/* - * Stream2MMIO. - */ -typedef enum { - STREAM2MMIO0_ID = 0, /* map to ISYS2401_S2M_A */ - STREAM2MMIO1_ID, /* map to ISYS2401_S2M_B */ - STREAM2MMIO2_ID, /* map to ISYS2401_S2M_C */ - N_STREAM2MMIO_ID -} stream2mmio_ID_t; - -typedef enum { - /* - * Stream2MMIO 0 has 8 SIDs that are indexed by - * [STREAM2MMIO_SID0_ID...STREAM2MMIO_SID7_ID]. - * - * Stream2MMIO 1 has 4 SIDs that are indexed by - * [STREAM2MMIO_SID0_ID...TREAM2MMIO_SID3_ID]. - * - * Stream2MMIO 2 has 4 SIDs that are indexed by - * [STREAM2MMIO_SID0_ID...STREAM2MMIO_SID3_ID]. - */ - STREAM2MMIO_SID0_ID = 0, - STREAM2MMIO_SID1_ID, - STREAM2MMIO_SID2_ID, - STREAM2MMIO_SID3_ID, - STREAM2MMIO_SID4_ID, - STREAM2MMIO_SID5_ID, - STREAM2MMIO_SID6_ID, - STREAM2MMIO_SID7_ID, - N_STREAM2MMIO_SID_ID -} stream2mmio_sid_ID_t; -/* end of Stream2MMIO */ - -/** - * Input System 2401: CSI-MIPI recevier. - */ -typedef enum { - CSI_RX_BACKEND0_ID = 0, /* map to ISYS2401_MIPI_BE_A */ - CSI_RX_BACKEND1_ID, /* map to ISYS2401_MIPI_BE_B */ - CSI_RX_BACKEND2_ID, /* map to ISYS2401_MIPI_BE_C */ - N_CSI_RX_BACKEND_ID -} csi_rx_backend_ID_t; - -typedef enum { - CSI_RX_FRONTEND0_ID = 0, /* map to ISYS2401_CSI_RX_A */ - CSI_RX_FRONTEND1_ID, /* map to ISYS2401_CSI_RX_B */ - CSI_RX_FRONTEND2_ID, /* map to ISYS2401_CSI_RX_C */ -#define N_CSI_RX_FRONTEND_ID (CSI_RX_FRONTEND2_ID + 1) -} csi_rx_frontend_ID_t; - -typedef enum { - CSI_RX_DLANE0_ID = 0, /* map to DLANE0 in CSI RX */ - CSI_RX_DLANE1_ID, /* map to DLANE1 in CSI RX */ - CSI_RX_DLANE2_ID, /* map to DLANE2 in CSI RX */ - CSI_RX_DLANE3_ID, /* map to DLANE3 in CSI RX */ - N_CSI_RX_DLANE_ID -} csi_rx_fe_dlane_ID_t; -/* end of CSI-MIPI receiver */ - -typedef enum { - ISYS2401_DMA0_ID = 0, - N_ISYS2401_DMA_ID -} isys2401_dma_ID_t; - -/** - * Pixel-generator. ("system_global.h") - */ -typedef enum { - PIXELGEN0_ID = 0, - PIXELGEN1_ID, - PIXELGEN2_ID, - N_PIXELGEN_ID -} pixelgen_ID_t; -/* end of pixel-generator. ("system_global.h") */ - -typedef enum { - INPUT_SYSTEM_CSI_PORT0_ID = 0, - INPUT_SYSTEM_CSI_PORT1_ID, - INPUT_SYSTEM_CSI_PORT2_ID, - - INPUT_SYSTEM_PIXELGEN_PORT0_ID, - INPUT_SYSTEM_PIXELGEN_PORT1_ID, - INPUT_SYSTEM_PIXELGEN_PORT2_ID, - - N_INPUT_SYSTEM_INPUT_PORT_ID -} input_system_input_port_ID_t; - -#define N_INPUT_SYSTEM_CSI_PORT 3 - -typedef enum { - ISYS2401_DMA_CHANNEL_0 = 0, - ISYS2401_DMA_CHANNEL_1, - ISYS2401_DMA_CHANNEL_2, - ISYS2401_DMA_CHANNEL_3, - ISYS2401_DMA_CHANNEL_4, - ISYS2401_DMA_CHANNEL_5, - ISYS2401_DMA_CHANNEL_6, - ISYS2401_DMA_CHANNEL_7, - ISYS2401_DMA_CHANNEL_8, - ISYS2401_DMA_CHANNEL_9, - ISYS2401_DMA_CHANNEL_10, - ISYS2401_DMA_CHANNEL_11, - N_ISYS2401_DMA_CHANNEL -} isys2401_dma_channel; - -enum ia_css_isp_memories { - IA_CSS_ISP_PMEM0 = 0, - IA_CSS_ISP_DMEM0, - IA_CSS_ISP_VMEM0, - IA_CSS_ISP_VAMEM0, - IA_CSS_ISP_VAMEM1, - IA_CSS_ISP_VAMEM2, - IA_CSS_ISP_HMEM0, - IA_CSS_SP_DMEM0, - IA_CSS_DDR, - N_IA_CSS_MEMORIES -}; - -#define IA_CSS_NUM_MEMORIES 9 -/* For driver compatibility */ -#define N_IA_CSS_ISP_MEMORIES IA_CSS_NUM_MEMORIES -#define IA_CSS_NUM_ISP_MEMORIES IA_CSS_NUM_MEMORIES - -#endif /* __SYSTEM_GLOBAL_H_INCLUDED__ */ diff --git a/drivers/staging/media/atomisp/pci/isp2401_system_local.h b/drivers/staging/media/atomisp/pci/isp2401_system_local.h index d60591e04b61..ae7dfd9ea0c4 100644 --- a/drivers/staging/media/atomisp/pci/isp2401_system_local.h +++ b/drivers/staging/media/atomisp/pci/isp2401_system_local.h @@ -24,9 +24,6 @@ #include "system_global.h" -/* This interface is deprecated */ -#include "hive_types.h" - /* * Cell specific address maps */ diff --git a/drivers/staging/media/atomisp/pci/sh_css.c b/drivers/staging/media/atomisp/pci/sh_css.c index 6676537f0e97..54434c2dbaf9 100644 --- a/drivers/staging/media/atomisp/pci/sh_css.c +++ b/drivers/staging/media/atomisp/pci/sh_css.c @@ -1841,8 +1841,13 @@ ia_css_init(struct device *dev, const struct ia_css_env *env, #endif #if !defined(HAS_NO_INPUT_SYSTEM) - dma_set_max_burst_size(DMA0_ID, HIVE_DMA_BUS_DDR_CONN, - ISP_DMA_MAX_BURST_LENGTH); + + if (!IS_ISP2401) + dma_set_max_burst_size(DMA0_ID, HIVE_DMA_BUS_DDR_CONN, + ISP2400_DMA_MAX_BURST_LENGTH); + else + dma_set_max_burst_size(DMA0_ID, HIVE_DMA_BUS_DDR_CONN, + ISP2401_DMA_MAX_BURST_LENGTH); if (ia_css_isys_init() != INPUT_SYSTEM_ERR_NO_ERROR) err = -EINVAL; diff --git a/drivers/staging/media/atomisp/pci/system_global.h b/drivers/staging/media/atomisp/pci/system_global.h index 16d0a2e9a4dc..90210f6943d2 100644 --- a/drivers/staging/media/atomisp/pci/system_global.h +++ b/drivers/staging/media/atomisp/pci/system_global.h @@ -4,8 +4,403 @@ * (c) 2020 Mauro Carvalho Chehab */ +#ifndef __SYSTEM_GLOBAL_H_INCLUDED__ +#define __SYSTEM_GLOBAL_H_INCLUDED__ + +/* + * Create a list of HAS and IS properties that defines the system + * Those are common for both ISP2400 and ISP2401 + * + * The configuration assumes the following + * - The system is hetereogeneous; Multiple cells and devices classes + * - The cell and device instances are homogeneous, each device type + * belongs to the same class + * - Device instances supporting a subset of the class capabilities are + * allowed + * + * We could manage different device classes through the enumerated + * lists (C) or the use of classes (C++), but that is presently not + * fully supported + * + * N.B. the 3 input formatters are of 2 different classess + */ + +#define HAS_MMU_VERSION_2 +#define HAS_DMA_VERSION_2 +#define HAS_GDC_VERSION_2 +#define HAS_VAMEM_VERSION_2 +#define HAS_HMEM_VERSION_1 +#define HAS_BAMEM_VERSION_2 +#define HAS_IRQ_VERSION_2 +#define HAS_IRQ_MAP_VERSION_2 +#define HAS_INPUT_FORMATTER_VERSION_2 +#define HAS_INPUT_SYSTEM_VERSION_2 +#define HAS_BUFFERED_SENSOR +#define HAS_FIFO_MONITORS_VERSION_2 +#define HAS_GP_DEVICE_VERSION_2 +#define HAS_GPIO_VERSION_1 +#define HAS_TIMED_CTRL_VERSION_1 +#define HAS_RX_VERSION_2 + +/* per-frame parameter handling support */ +#define SH_CSS_ENABLE_PER_FRAME_PARAMS + +#define DMA_DDR_TO_VAMEM_WORKAROUND +#define DMA_DDR_TO_HMEM_WORKAROUND + +/* + * The longest allowed (uninteruptible) bus transfer, does not + * take stalling into account + */ +#define HIVE_ISP_MAX_BURST_LENGTH 1024 + +/* + * Maximum allowed burst length in words for the ISP DMA + * This value is set to 2 to prevent the ISP DMA from blocking + * the bus for too long; as the input system can only buffer + * 2 lines on Moorefield and Cherrytrail, the input system buffers + * may overflow if blocked for too long (BZ 2726). + */ +#define ISP2400_DMA_MAX_BURST_LENGTH 128 +#define ISP2401_DMA_MAX_BURST_LENGTH 2 + #ifdef ISP2401 # include "isp2401_system_global.h" #else # include "isp2400_system_global.h" #endif + +#include +#include + +/* This interface is deprecated */ +#include "hive_types.h" + +/* + * Semi global. "HRT" is accessible from SP, but the HRT types do not fully apply + */ +#define HRT_VADDRESS_WIDTH 32 + +#define SIZEOF_HRT_REG (HRT_DATA_WIDTH >> 3) +#define HIVE_ISP_CTRL_DATA_BYTES (HIVE_ISP_CTRL_DATA_WIDTH / 8) + +/* The main bus connecting all devices */ +#define HRT_BUS_WIDTH HIVE_ISP_CTRL_DATA_WIDTH +#define HRT_BUS_BYTES HIVE_ISP_CTRL_DATA_BYTES + +typedef u32 hrt_bus_align_t; + +/* + * Enumerate the devices, device access through the API is by ID, + * through the DLI by address. The enumerator terminators are used + * to size the wiring arrays and as an exception value. + */ +typedef enum { + DDR0_ID = 0, + N_DDR_ID +} ddr_ID_t; + +typedef enum { + ISP0_ID = 0, + N_ISP_ID +} isp_ID_t; + +typedef enum { + SP0_ID = 0, + N_SP_ID +} sp_ID_t; + +typedef enum { + MMU0_ID = 0, + MMU1_ID, + N_MMU_ID +} mmu_ID_t; + +typedef enum { + DMA0_ID = 0, + N_DMA_ID +} dma_ID_t; + +typedef enum { + GDC0_ID = 0, + GDC1_ID, + N_GDC_ID +} gdc_ID_t; + +/* this extra define is needed because we want to use it also + in the preprocessor, and that doesn't work with enums. + */ +#define N_GDC_ID_CPP 2 + +typedef enum { + VAMEM0_ID = 0, + VAMEM1_ID, + VAMEM2_ID, + N_VAMEM_ID +} vamem_ID_t; + +typedef enum { + BAMEM0_ID = 0, + N_BAMEM_ID +} bamem_ID_t; + +typedef enum { + HMEM0_ID = 0, + N_HMEM_ID +} hmem_ID_t; + +typedef enum { + IRQ0_ID = 0, /* GP IRQ block */ + IRQ1_ID, /* Input formatter */ + IRQ2_ID, /* input system */ + IRQ3_ID, /* input selector */ + N_IRQ_ID +} irq_ID_t; + +typedef enum { + FIFO_MONITOR0_ID = 0, + N_FIFO_MONITOR_ID +} fifo_monitor_ID_t; + +typedef enum { + GP_DEVICE0_ID = 0, + N_GP_DEVICE_ID +} gp_device_ID_t; + +typedef enum { + GP_TIMER0_ID = 0, + GP_TIMER1_ID, + GP_TIMER2_ID, + GP_TIMER3_ID, + GP_TIMER4_ID, + GP_TIMER5_ID, + GP_TIMER6_ID, + GP_TIMER7_ID, + N_GP_TIMER_ID +} gp_timer_ID_t; + +typedef enum { + GPIO0_ID = 0, + N_GPIO_ID +} gpio_ID_t; + +typedef enum { + TIMED_CTRL0_ID = 0, + N_TIMED_CTRL_ID +} timed_ctrl_ID_t; + +typedef enum { + INPUT_FORMATTER0_ID = 0, + INPUT_FORMATTER1_ID, + INPUT_FORMATTER2_ID, + INPUT_FORMATTER3_ID, + N_INPUT_FORMATTER_ID +} input_formatter_ID_t; + +/* The IF RST is outside the IF */ +#define INPUT_FORMATTER0_SRST_OFFSET 0x0824 +#define INPUT_FORMATTER1_SRST_OFFSET 0x0624 +#define INPUT_FORMATTER2_SRST_OFFSET 0x0424 +#define INPUT_FORMATTER3_SRST_OFFSET 0x0224 + +#define INPUT_FORMATTER0_SRST_MASK 0x0001 +#define INPUT_FORMATTER1_SRST_MASK 0x0002 +#define INPUT_FORMATTER2_SRST_MASK 0x0004 +#define INPUT_FORMATTER3_SRST_MASK 0x0008 + +typedef enum { + INPUT_SYSTEM0_ID = 0, + N_INPUT_SYSTEM_ID +} input_system_ID_t; + +typedef enum { + RX0_ID = 0, + N_RX_ID +} rx_ID_t; + +enum mipi_port_id { + MIPI_PORT0_ID = 0, + MIPI_PORT1_ID, + MIPI_PORT2_ID, + N_MIPI_PORT_ID +}; + +#define N_RX_CHANNEL_ID 4 + +/* Generic port enumeration with an internal port type ID */ +typedef enum { + CSI_PORT0_ID = 0, + CSI_PORT1_ID, + CSI_PORT2_ID, + TPG_PORT0_ID, + PRBS_PORT0_ID, + FIFO_PORT0_ID, + MEMORY_PORT0_ID, + N_INPUT_PORT_ID +} input_port_ID_t; + +typedef enum { + CAPTURE_UNIT0_ID = 0, + CAPTURE_UNIT1_ID, + CAPTURE_UNIT2_ID, + ACQUISITION_UNIT0_ID, + DMA_UNIT0_ID, + CTRL_UNIT0_ID, + GPREGS_UNIT0_ID, + FIFO_UNIT0_ID, + IRQ_UNIT0_ID, + N_SUB_SYSTEM_ID +} sub_system_ID_t; + +#define N_CAPTURE_UNIT_ID 3 +#define N_ACQUISITION_UNIT_ID 1 +#define N_CTRL_UNIT_ID 1 + + +enum ia_css_isp_memories { + IA_CSS_ISP_PMEM0 = 0, + IA_CSS_ISP_DMEM0, + IA_CSS_ISP_VMEM0, + IA_CSS_ISP_VAMEM0, + IA_CSS_ISP_VAMEM1, + IA_CSS_ISP_VAMEM2, + IA_CSS_ISP_HMEM0, + IA_CSS_SP_DMEM0, + IA_CSS_DDR, + N_IA_CSS_MEMORIES +}; + +#define IA_CSS_NUM_MEMORIES 9 +/* For driver compatibility */ +#define N_IA_CSS_ISP_MEMORIES IA_CSS_NUM_MEMORIES +#define IA_CSS_NUM_ISP_MEMORIES IA_CSS_NUM_MEMORIES + +/* + * ISP2401 specific enums + */ + +typedef enum { + ISYS_IRQ0_ID = 0, /* port a */ + ISYS_IRQ1_ID, /* port b */ + ISYS_IRQ2_ID, /* port c */ + N_ISYS_IRQ_ID +} isys_irq_ID_t; + + +/* + * Input-buffer Controller. + */ +typedef enum { + IBUF_CTRL0_ID = 0, /* map to ISYS2401_IBUF_CNTRL_A */ + IBUF_CTRL1_ID, /* map to ISYS2401_IBUF_CNTRL_B */ + IBUF_CTRL2_ID, /* map ISYS2401_IBUF_CNTRL_C */ + N_IBUF_CTRL_ID +} ibuf_ctrl_ID_t; +/* end of Input-buffer Controller */ + +/* + * Stream2MMIO. + */ +typedef enum { + STREAM2MMIO0_ID = 0, /* map to ISYS2401_S2M_A */ + STREAM2MMIO1_ID, /* map to ISYS2401_S2M_B */ + STREAM2MMIO2_ID, /* map to ISYS2401_S2M_C */ + N_STREAM2MMIO_ID +} stream2mmio_ID_t; + +typedef enum { + /* + * Stream2MMIO 0 has 8 SIDs that are indexed by + * [STREAM2MMIO_SID0_ID...STREAM2MMIO_SID7_ID]. + * + * Stream2MMIO 1 has 4 SIDs that are indexed by + * [STREAM2MMIO_SID0_ID...TREAM2MMIO_SID3_ID]. + * + * Stream2MMIO 2 has 4 SIDs that are indexed by + * [STREAM2MMIO_SID0_ID...STREAM2MMIO_SID3_ID]. + */ + STREAM2MMIO_SID0_ID = 0, + STREAM2MMIO_SID1_ID, + STREAM2MMIO_SID2_ID, + STREAM2MMIO_SID3_ID, + STREAM2MMIO_SID4_ID, + STREAM2MMIO_SID5_ID, + STREAM2MMIO_SID6_ID, + STREAM2MMIO_SID7_ID, + N_STREAM2MMIO_SID_ID +} stream2mmio_sid_ID_t; +/* end of Stream2MMIO */ + +/** + * Input System 2401: CSI-MIPI recevier. + */ +typedef enum { + CSI_RX_BACKEND0_ID = 0, /* map to ISYS2401_MIPI_BE_A */ + CSI_RX_BACKEND1_ID, /* map to ISYS2401_MIPI_BE_B */ + CSI_RX_BACKEND2_ID, /* map to ISYS2401_MIPI_BE_C */ + N_CSI_RX_BACKEND_ID +} csi_rx_backend_ID_t; + +typedef enum { + CSI_RX_FRONTEND0_ID = 0, /* map to ISYS2401_CSI_RX_A */ + CSI_RX_FRONTEND1_ID, /* map to ISYS2401_CSI_RX_B */ + CSI_RX_FRONTEND2_ID, /* map to ISYS2401_CSI_RX_C */ +#define N_CSI_RX_FRONTEND_ID (CSI_RX_FRONTEND2_ID + 1) +} csi_rx_frontend_ID_t; + +typedef enum { + CSI_RX_DLANE0_ID = 0, /* map to DLANE0 in CSI RX */ + CSI_RX_DLANE1_ID, /* map to DLANE1 in CSI RX */ + CSI_RX_DLANE2_ID, /* map to DLANE2 in CSI RX */ + CSI_RX_DLANE3_ID, /* map to DLANE3 in CSI RX */ + N_CSI_RX_DLANE_ID +} csi_rx_fe_dlane_ID_t; +/* end of CSI-MIPI receiver */ + +typedef enum { + ISYS2401_DMA0_ID = 0, + N_ISYS2401_DMA_ID +} isys2401_dma_ID_t; + +/** + * Pixel-generator. ("system_global.h") + */ +typedef enum { + PIXELGEN0_ID = 0, + PIXELGEN1_ID, + PIXELGEN2_ID, + N_PIXELGEN_ID +} pixelgen_ID_t; +/* end of pixel-generator. ("system_global.h") */ + +typedef enum { + INPUT_SYSTEM_CSI_PORT0_ID = 0, + INPUT_SYSTEM_CSI_PORT1_ID, + INPUT_SYSTEM_CSI_PORT2_ID, + + INPUT_SYSTEM_PIXELGEN_PORT0_ID, + INPUT_SYSTEM_PIXELGEN_PORT1_ID, + INPUT_SYSTEM_PIXELGEN_PORT2_ID, + + N_INPUT_SYSTEM_INPUT_PORT_ID +} input_system_input_port_ID_t; + +#define N_INPUT_SYSTEM_CSI_PORT 3 + +typedef enum { + ISYS2401_DMA_CHANNEL_0 = 0, + ISYS2401_DMA_CHANNEL_1, + ISYS2401_DMA_CHANNEL_2, + ISYS2401_DMA_CHANNEL_3, + ISYS2401_DMA_CHANNEL_4, + ISYS2401_DMA_CHANNEL_5, + ISYS2401_DMA_CHANNEL_6, + ISYS2401_DMA_CHANNEL_7, + ISYS2401_DMA_CHANNEL_8, + ISYS2401_DMA_CHANNEL_9, + ISYS2401_DMA_CHANNEL_10, + ISYS2401_DMA_CHANNEL_11, + N_ISYS2401_DMA_CHANNEL +} isys2401_dma_channel; + +#endif /* __SYSTEM_GLOBAL_H_INCLUDED__ */ diff --git a/drivers/staging/media/atomisp/pci/system_local.h b/drivers/staging/media/atomisp/pci/system_local.h index dfcc4c2b8f16..7ad9cee6d550 100644 --- a/drivers/staging/media/atomisp/pci/system_local.h +++ b/drivers/staging/media/atomisp/pci/system_local.h @@ -1,5 +1,4 @@ /* SPDX-License-Identifier: GPL-2.0 */ -// SPDX-License-Identifier: GPL-2.0-or-later /* * (c) 2020 Mauro Carvalho Chehab */ -- cgit v1.2.3 From 08b2bcc665eac1d53bc1394f08b0bdd3440a57cb Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 18 Jul 2020 09:51:14 +0200 Subject: media: atomisp: get rid of version-specific system_local.h After removing the unused 32-bits data, the isp2401_system_local.h now contains everything that it is needed, either by isp2401 or by isp2400. So, remove code duplication. Signed-off-by: Mauro Carvalho Chehab --- .../media/atomisp/pci/isp2400_system_local.h | 149 --------------- .../media/atomisp/pci/isp2401_system_local.h | 196 -------------------- drivers/staging/media/atomisp/pci/system_local.h | 199 ++++++++++++++++++++- 3 files changed, 194 insertions(+), 350 deletions(-) delete mode 100644 drivers/staging/media/atomisp/pci/isp2400_system_local.h delete mode 100644 drivers/staging/media/atomisp/pci/isp2401_system_local.h diff --git a/drivers/staging/media/atomisp/pci/isp2400_system_local.h b/drivers/staging/media/atomisp/pci/isp2400_system_local.h deleted file mode 100644 index fb6355c7e1a3..000000000000 --- a/drivers/staging/media/atomisp/pci/isp2400_system_local.h +++ /dev/null @@ -1,149 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Support for Intel Camera Imaging ISP subsystem. - * Copyright (c) 2010-2015, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#ifndef __SYSTEM_LOCAL_H_INCLUDED__ -#define __SYSTEM_LOCAL_H_INCLUDED__ - -#ifdef HRT_ISP_CSS_CUSTOM_HOST -#ifndef HRT_USE_VIR_ADDRS -#define HRT_USE_VIR_ADDRS -#endif -#endif - -#include "system_global.h" - -/* - * Cell specific address maps - */ - -#define GP_FIFO_BASE ((hrt_address)0x0000000000090104) /* This is NOT a base address */ - -/* ISP */ -static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { - (hrt_address)0x0000000000020000ULL -}; - -static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { - (hrt_address)0x0000000000200000ULL -}; - -static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { - (hrt_address)0x0000000000100000ULL -}; - -/* SP */ -static const hrt_address SP_CTRL_BASE[N_SP_ID] = { - (hrt_address)0x0000000000010000ULL -}; - -static const hrt_address SP_DMEM_BASE[N_SP_ID] = { - (hrt_address)0x0000000000300000ULL -}; - -/* MMU */ -/* - * MMU0_ID: The data MMU - * MMU1_ID: The icache MMU - */ -static const hrt_address MMU_BASE[N_MMU_ID] = { - (hrt_address)0x0000000000070000ULL, - (hrt_address)0x00000000000A0000ULL -}; - -/* DMA */ -static const hrt_address DMA_BASE[N_DMA_ID] = { - (hrt_address)0x0000000000040000ULL -}; - -/* IRQ */ -static const hrt_address IRQ_BASE[N_IRQ_ID] = { - (hrt_address)0x0000000000000500ULL, - (hrt_address)0x0000000000030A00ULL, - (hrt_address)0x000000000008C000ULL, - (hrt_address)0x0000000000090200ULL -}; - -/* - (hrt_address)0x0000000000000500ULL}; - */ - -/* GDC */ -static const hrt_address GDC_BASE[N_GDC_ID] = { - (hrt_address)0x0000000000050000ULL, - (hrt_address)0x0000000000060000ULL -}; - -/* FIFO_MONITOR (not a subset of GP_DEVICE) */ -static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { - (hrt_address)0x0000000000000000ULL -}; - -/* -static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = { - (hrt_address)0x0000000000000000ULL}; - -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - (hrt_address)0x0000000000090000ULL}; -*/ - -/* GP_DEVICE (single base for all separate GP_REG instances) */ -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - (hrt_address)0x0000000000000000ULL -}; - -/*GP TIMER , all timer registers are inter-twined, - * so, having multiple base addresses for - * different timers does not help*/ -static const hrt_address GP_TIMER_BASE = - (hrt_address)0x0000000000000600ULL; -/* GPIO */ -static const hrt_address GPIO_BASE[N_GPIO_ID] = { - (hrt_address)0x0000000000000400ULL -}; - -/* TIMED_CTRL */ -static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { - (hrt_address)0x0000000000000100ULL -}; - -/* INPUT_FORMATTER */ -static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { - (hrt_address)0x0000000000030000ULL, - (hrt_address)0x0000000000030200ULL, - (hrt_address)0x0000000000030400ULL, - (hrt_address)0x0000000000030600ULL -}; /* memcpy() */ - -/* INPUT_SYSTEM */ -static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { - (hrt_address)0x0000000000080000ULL -}; - -/* (hrt_address)0x0000000000081000ULL, */ /* capture A */ -/* (hrt_address)0x0000000000082000ULL, */ /* capture B */ -/* (hrt_address)0x0000000000083000ULL, */ /* capture C */ -/* (hrt_address)0x0000000000084000ULL, */ /* Acquisition */ -/* (hrt_address)0x0000000000085000ULL, */ /* DMA */ -/* (hrt_address)0x0000000000089000ULL, */ /* ctrl */ -/* (hrt_address)0x000000000008A000ULL, */ /* GP regs */ -/* (hrt_address)0x000000000008B000ULL, */ /* FIFO */ -/* (hrt_address)0x000000000008C000ULL, */ /* IRQ */ - -/* RX, the MIPI lane control regs start at offset 0 */ -static const hrt_address RX_BASE[N_RX_ID] = { - (hrt_address)0x0000000000080100ULL -}; - -#endif /* __SYSTEM_LOCAL_H_INCLUDED__ */ diff --git a/drivers/staging/media/atomisp/pci/isp2401_system_local.h b/drivers/staging/media/atomisp/pci/isp2401_system_local.h deleted file mode 100644 index ae7dfd9ea0c4..000000000000 --- a/drivers/staging/media/atomisp/pci/isp2401_system_local.h +++ /dev/null @@ -1,196 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Support for Intel Camera Imaging ISP subsystem. - * Copyright (c) 2015, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#ifndef __SYSTEM_LOCAL_H_INCLUDED__ -#define __SYSTEM_LOCAL_H_INCLUDED__ - -#ifdef HRT_ISP_CSS_CUSTOM_HOST -#ifndef HRT_USE_VIR_ADDRS -#define HRT_USE_VIR_ADDRS -#endif -#endif - -#include "system_global.h" - -/* - * Cell specific address maps - */ - -#define GP_FIFO_BASE ((hrt_address)0x0000000000090104) /* This is NOT a base address */ - -/* ISP */ -static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { - 0x0000000000020000ULL -}; - -static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { - 0x0000000000200000ULL -}; - -static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { - 0x0000000000100000ULL -}; - -/* SP */ -static const hrt_address SP_CTRL_BASE[N_SP_ID] = { - 0x0000000000010000ULL -}; - -static const hrt_address SP_DMEM_BASE[N_SP_ID] = { - 0x0000000000300000ULL -}; - -/* MMU */ -/* - * MMU0_ID: The data MMU - * MMU1_ID: The icache MMU - */ -static const hrt_address MMU_BASE[N_MMU_ID] = { - 0x0000000000070000ULL, - 0x00000000000A0000ULL -}; - -/* DMA */ -static const hrt_address DMA_BASE[N_DMA_ID] = { - 0x0000000000040000ULL -}; - -static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { - 0x00000000000CA000ULL -}; - -/* IRQ */ -static const hrt_address IRQ_BASE[N_IRQ_ID] = { - 0x0000000000000500ULL, - 0x0000000000030A00ULL, - 0x000000000008C000ULL, - 0x0000000000090200ULL -}; - -/* - 0x0000000000000500ULL}; - */ - -/* GDC */ -static const hrt_address GDC_BASE[N_GDC_ID] = { - 0x0000000000050000ULL, - 0x0000000000060000ULL -}; - -/* FIFO_MONITOR (not a subset of GP_DEVICE) */ -static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { - 0x0000000000000000ULL -}; - -/* -static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = { - 0x0000000000000000ULL}; - -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - 0x0000000000090000ULL}; -*/ - -/* GP_DEVICE (single base for all separate GP_REG instances) */ -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - 0x0000000000000000ULL -}; - -/*GP TIMER , all timer registers are inter-twined, - * so, having multiple base addresses for - * different timers does not help*/ -static const hrt_address GP_TIMER_BASE = - (hrt_address)0x0000000000000600ULL; - -/* GPIO */ -static const hrt_address GPIO_BASE[N_GPIO_ID] = { - 0x0000000000000400ULL -}; - -/* TIMED_CTRL */ -static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { - 0x0000000000000100ULL -}; - -/* INPUT_FORMATTER */ -static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { - 0x0000000000030000ULL, - 0x0000000000030200ULL, - 0x0000000000030400ULL, - 0x0000000000030600ULL -}; /* memcpy() */ - -/* INPUT_SYSTEM */ -static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { - 0x0000000000080000ULL -}; - -/* 0x0000000000081000ULL, */ /* capture A */ -/* 0x0000000000082000ULL, */ /* capture B */ -/* 0x0000000000083000ULL, */ /* capture C */ -/* 0x0000000000084000ULL, */ /* Acquisition */ -/* 0x0000000000085000ULL, */ /* DMA */ -/* 0x0000000000089000ULL, */ /* ctrl */ -/* 0x000000000008A000ULL, */ /* GP regs */ -/* 0x000000000008B000ULL, */ /* FIFO */ -/* 0x000000000008C000ULL, */ /* IRQ */ - -/* RX, the MIPI lane control regs start at offset 0 */ -static const hrt_address RX_BASE[N_RX_ID] = { - 0x0000000000080100ULL -}; - -/* IBUF_CTRL, part of the Input System 2401 */ -static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { - 0x00000000000C1800ULL, /* ibuf controller A */ - 0x00000000000C3800ULL, /* ibuf controller B */ - 0x00000000000C5800ULL /* ibuf controller C */ -}; - -/* ISYS IRQ Controllers, part of the Input System 2401 */ -static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { - 0x00000000000C1400ULL, /* port a */ - 0x00000000000C3400ULL, /* port b */ - 0x00000000000C5400ULL /* port c */ -}; - -/* CSI FE, part of the Input System 2401 */ -static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { - 0x00000000000C0400ULL, /* csi fe controller A */ - 0x00000000000C2400ULL, /* csi fe controller B */ - 0x00000000000C4400ULL /* csi fe controller C */ -}; - -/* CSI BE, part of the Input System 2401 */ -static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { - 0x00000000000C0800ULL, /* csi be controller A */ - 0x00000000000C2800ULL, /* csi be controller B */ - 0x00000000000C4800ULL /* csi be controller C */ -}; - -/* PIXEL Generator, part of the Input System 2401 */ -static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { - 0x00000000000C1000ULL, /* pixel gen controller A */ - 0x00000000000C3000ULL, /* pixel gen controller B */ - 0x00000000000C5000ULL /* pixel gen controller C */ -}; - -/* Stream2MMIO, part of the Input System 2401 */ -static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { - 0x00000000000C0C00ULL, /* stream2mmio controller A */ - 0x00000000000C2C00ULL, /* stream2mmio controller B */ - 0x00000000000C4C00ULL /* stream2mmio controller C */ -}; - -#endif /* __SYSTEM_LOCAL_H_INCLUDED__ */ diff --git a/drivers/staging/media/atomisp/pci/system_local.h b/drivers/staging/media/atomisp/pci/system_local.h index 7ad9cee6d550..d60591e04b61 100644 --- a/drivers/staging/media/atomisp/pci/system_local.h +++ b/drivers/staging/media/atomisp/pci/system_local.h @@ -1,10 +1,199 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * (c) 2020 Mauro Carvalho Chehab + * Support for Intel Camera Imaging ISP subsystem. + * Copyright (c) 2015, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. */ -#ifdef ISP2401 -# include "isp2401_system_local.h" -#else -# include "isp2400_system_local.h" +#ifndef __SYSTEM_LOCAL_H_INCLUDED__ +#define __SYSTEM_LOCAL_H_INCLUDED__ + +#ifdef HRT_ISP_CSS_CUSTOM_HOST +#ifndef HRT_USE_VIR_ADDRS +#define HRT_USE_VIR_ADDRS +#endif #endif + +#include "system_global.h" + +/* This interface is deprecated */ +#include "hive_types.h" + +/* + * Cell specific address maps + */ + +#define GP_FIFO_BASE ((hrt_address)0x0000000000090104) /* This is NOT a base address */ + +/* ISP */ +static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { + 0x0000000000020000ULL +}; + +static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { + 0x0000000000200000ULL +}; + +static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { + 0x0000000000100000ULL +}; + +/* SP */ +static const hrt_address SP_CTRL_BASE[N_SP_ID] = { + 0x0000000000010000ULL +}; + +static const hrt_address SP_DMEM_BASE[N_SP_ID] = { + 0x0000000000300000ULL +}; + +/* MMU */ +/* + * MMU0_ID: The data MMU + * MMU1_ID: The icache MMU + */ +static const hrt_address MMU_BASE[N_MMU_ID] = { + 0x0000000000070000ULL, + 0x00000000000A0000ULL +}; + +/* DMA */ +static const hrt_address DMA_BASE[N_DMA_ID] = { + 0x0000000000040000ULL +}; + +static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { + 0x00000000000CA000ULL +}; + +/* IRQ */ +static const hrt_address IRQ_BASE[N_IRQ_ID] = { + 0x0000000000000500ULL, + 0x0000000000030A00ULL, + 0x000000000008C000ULL, + 0x0000000000090200ULL +}; + +/* + 0x0000000000000500ULL}; + */ + +/* GDC */ +static const hrt_address GDC_BASE[N_GDC_ID] = { + 0x0000000000050000ULL, + 0x0000000000060000ULL +}; + +/* FIFO_MONITOR (not a subset of GP_DEVICE) */ +static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { + 0x0000000000000000ULL +}; + +/* +static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = { + 0x0000000000000000ULL}; + +static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { + 0x0000000000090000ULL}; +*/ + +/* GP_DEVICE (single base for all separate GP_REG instances) */ +static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { + 0x0000000000000000ULL +}; + +/*GP TIMER , all timer registers are inter-twined, + * so, having multiple base addresses for + * different timers does not help*/ +static const hrt_address GP_TIMER_BASE = + (hrt_address)0x0000000000000600ULL; + +/* GPIO */ +static const hrt_address GPIO_BASE[N_GPIO_ID] = { + 0x0000000000000400ULL +}; + +/* TIMED_CTRL */ +static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { + 0x0000000000000100ULL +}; + +/* INPUT_FORMATTER */ +static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { + 0x0000000000030000ULL, + 0x0000000000030200ULL, + 0x0000000000030400ULL, + 0x0000000000030600ULL +}; /* memcpy() */ + +/* INPUT_SYSTEM */ +static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { + 0x0000000000080000ULL +}; + +/* 0x0000000000081000ULL, */ /* capture A */ +/* 0x0000000000082000ULL, */ /* capture B */ +/* 0x0000000000083000ULL, */ /* capture C */ +/* 0x0000000000084000ULL, */ /* Acquisition */ +/* 0x0000000000085000ULL, */ /* DMA */ +/* 0x0000000000089000ULL, */ /* ctrl */ +/* 0x000000000008A000ULL, */ /* GP regs */ +/* 0x000000000008B000ULL, */ /* FIFO */ +/* 0x000000000008C000ULL, */ /* IRQ */ + +/* RX, the MIPI lane control regs start at offset 0 */ +static const hrt_address RX_BASE[N_RX_ID] = { + 0x0000000000080100ULL +}; + +/* IBUF_CTRL, part of the Input System 2401 */ +static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { + 0x00000000000C1800ULL, /* ibuf controller A */ + 0x00000000000C3800ULL, /* ibuf controller B */ + 0x00000000000C5800ULL /* ibuf controller C */ +}; + +/* ISYS IRQ Controllers, part of the Input System 2401 */ +static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { + 0x00000000000C1400ULL, /* port a */ + 0x00000000000C3400ULL, /* port b */ + 0x00000000000C5400ULL /* port c */ +}; + +/* CSI FE, part of the Input System 2401 */ +static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { + 0x00000000000C0400ULL, /* csi fe controller A */ + 0x00000000000C2400ULL, /* csi fe controller B */ + 0x00000000000C4400ULL /* csi fe controller C */ +}; + +/* CSI BE, part of the Input System 2401 */ +static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { + 0x00000000000C0800ULL, /* csi be controller A */ + 0x00000000000C2800ULL, /* csi be controller B */ + 0x00000000000C4800ULL /* csi be controller C */ +}; + +/* PIXEL Generator, part of the Input System 2401 */ +static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { + 0x00000000000C1000ULL, /* pixel gen controller A */ + 0x00000000000C3000ULL, /* pixel gen controller B */ + 0x00000000000C5000ULL /* pixel gen controller C */ +}; + +/* Stream2MMIO, part of the Input System 2401 */ +static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { + 0x00000000000C0C00ULL, /* stream2mmio controller A */ + 0x00000000000C2C00ULL, /* stream2mmio controller B */ + 0x00000000000C4C00ULL /* stream2mmio controller C */ +}; + +#endif /* __SYSTEM_LOCAL_H_INCLUDED__ */ -- cgit v1.2.3 From 85ebb8eb12e6fb1abdff774d9cfc926d2dc3246d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 19 Jul 2020 07:11:00 +0200 Subject: media: atomisp: move system_local consts into a C file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instead of declaring all those consts everywhere when the headers are included, just place them on a single place. This change shuts up lots of warnings when built with W=1: In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23, from drivers/staging/media/atomisp/pci/ia_css.h:26, from drivers/staging/media/atomisp/pci/atomisp_compat_css20.h:24, from drivers/staging/media/atomisp/pci/atomisp_compat.h:22, from drivers/staging/media/atomisp/pci/atomisp_drvfs.c:23: ./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { | ^~~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { | ^~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=] 165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=] 153 | static const hrt_address RX_BASE[N_RX_ID] = { | ^~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=] 138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=] 130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { | ^~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { | ^~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=] 120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = { | ^~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=] 116 | static const hrt_address GP_TIMER_BASE = | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=] 96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=] 90 | static const hrt_address GDC_BASE[N_GDC_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=] 78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=] 73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=] 69 | static const hrt_address DMA_BASE[N_DMA_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const hrt_address MMU_BASE[N_MMU_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=] 45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23, from drivers/staging/media/atomisp/pci/ia_css.h:26, from drivers/staging/media/atomisp/pci/atomisp_file.c:27: ./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { | ^~~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { | ^~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=] 165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=] 153 | static const hrt_address RX_BASE[N_RX_ID] = { | ^~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=] 138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=] 130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { | ^~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { | ^~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=] 120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = { | ^~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=] 116 | static const hrt_address GP_TIMER_BASE = | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=] 96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=] 90 | static const hrt_address GDC_BASE[N_GDC_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=] 78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=] 73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=] 69 | static const hrt_address DMA_BASE[N_DMA_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const hrt_address MMU_BASE[N_MMU_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=] 45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23, from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29, from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23, from drivers/staging/media/atomisp/pci/atomisp_internal.h:34, from drivers/staging/media/atomisp/pci/atomisp_cmd.h:30, from drivers/staging/media/atomisp/pci/atomisp_csi2.c:21: ./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { | ^~~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { | ^~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=] 165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=] 153 | static const hrt_address RX_BASE[N_RX_ID] = { | ^~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=] 138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=] 130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { | ^~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { | ^~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=] 120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = { | ^~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=] 116 | static const hrt_address GP_TIMER_BASE = | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=] 96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=] 90 | static const hrt_address GDC_BASE[N_GDC_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=] 78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=] 73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=] 69 | static const hrt_address DMA_BASE[N_DMA_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const hrt_address MMU_BASE[N_MMU_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=] 45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23, from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29, from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23, from drivers/staging/media/atomisp/pci/atomisp_internal.h:34, from drivers/staging/media/atomisp/pci/atomisp_acc.h:23, from drivers/staging/media/atomisp/pci/atomisp_acc.c:29: ./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { | ^~~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { | ^~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=] 165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=] 153 | static const hrt_address RX_BASE[N_RX_ID] = { | ^~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=] 138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=] 130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { | ^~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { | ^~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=] 120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = { | ^~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=] 116 | static const hrt_address GP_TIMER_BASE = | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=] 96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=] 90 | static const hrt_address GDC_BASE[N_GDC_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=] 78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=] 73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=] 69 | static const hrt_address DMA_BASE[N_DMA_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const hrt_address MMU_BASE[N_MMU_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=] 45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/Makefile | 1 + drivers/staging/media/atomisp/pci/system_local.c | 179 +++++++++++++++++++++++ drivers/staging/media/atomisp/pci/system_local.h | 146 ++++-------------- 3 files changed, 205 insertions(+), 121 deletions(-) create mode 100644 drivers/staging/media/atomisp/pci/system_local.c diff --git a/drivers/staging/media/atomisp/Makefile b/drivers/staging/media/atomisp/Makefile index 7b8288bbe119..205d0f8cc2e1 100644 --- a/drivers/staging/media/atomisp/Makefile +++ b/drivers/staging/media/atomisp/Makefile @@ -156,6 +156,7 @@ atomisp-objs += \ pci/hive_isp_css_common/host/timed_ctrl.o \ pci/hive_isp_css_common/host/vmem.o \ pci/hive_isp_css_shared/host/tag.o \ + pci/system_local.o \ obj-byt = \ pci/css_2400_system/hive/ia_css_isp_configs.o \ diff --git a/drivers/staging/media/atomisp/pci/system_local.c b/drivers/staging/media/atomisp/pci/system_local.c new file mode 100644 index 000000000000..4ca8569d7feb --- /dev/null +++ b/drivers/staging/media/atomisp/pci/system_local.c @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support for Intel Camera Imaging ISP subsystem. + * Copyright (c) 2015, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include "system_local.h" + +/* ISP */ +const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { + 0x0000000000020000ULL +}; + +const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { + 0x0000000000200000ULL +}; + +const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { + 0x0000000000100000ULL +}; + +/* SP */ +const hrt_address SP_CTRL_BASE[N_SP_ID] = { + 0x0000000000010000ULL +}; + +const hrt_address SP_DMEM_BASE[N_SP_ID] = { + 0x0000000000300000ULL +}; + +/* MMU */ +/* + * MMU0_ID: The data MMU + * MMU1_ID: The icache MMU + */ +const hrt_address MMU_BASE[N_MMU_ID] = { + 0x0000000000070000ULL, + 0x00000000000A0000ULL +}; + +/* DMA */ +const hrt_address DMA_BASE[N_DMA_ID] = { + 0x0000000000040000ULL +}; + +const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { + 0x00000000000CA000ULL +}; + +/* IRQ */ +const hrt_address IRQ_BASE[N_IRQ_ID] = { + 0x0000000000000500ULL, + 0x0000000000030A00ULL, + 0x000000000008C000ULL, + 0x0000000000090200ULL +}; + +/* + 0x0000000000000500ULL}; + */ + +/* GDC */ +const hrt_address GDC_BASE[N_GDC_ID] = { + 0x0000000000050000ULL, + 0x0000000000060000ULL +}; + +/* FIFO_MONITOR (not a subset of GP_DEVICE) */ +const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { + 0x0000000000000000ULL +}; + +/* +const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = { + 0x0000000000000000ULL}; + +const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { + 0x0000000000090000ULL}; +*/ + +/* GP_DEVICE (single base for all separate GP_REG instances) */ +const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { + 0x0000000000000000ULL +}; + +/*GP TIMER , all timer registers are inter-twined, + * so, having multiple base addresses for + * different timers does not help*/ +const hrt_address GP_TIMER_BASE = + (hrt_address)0x0000000000000600ULL; + +/* GPIO */ +const hrt_address GPIO_BASE[N_GPIO_ID] = { + 0x0000000000000400ULL +}; + +/* TIMED_CTRL */ +const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { + 0x0000000000000100ULL +}; + +/* INPUT_FORMATTER */ +const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { + 0x0000000000030000ULL, + 0x0000000000030200ULL, + 0x0000000000030400ULL, + 0x0000000000030600ULL +}; /* memcpy() */ + +/* INPUT_SYSTEM */ +const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { + 0x0000000000080000ULL +}; + +/* 0x0000000000081000ULL, */ /* capture A */ +/* 0x0000000000082000ULL, */ /* capture B */ +/* 0x0000000000083000ULL, */ /* capture C */ +/* 0x0000000000084000ULL, */ /* Acquisition */ +/* 0x0000000000085000ULL, */ /* DMA */ +/* 0x0000000000089000ULL, */ /* ctrl */ +/* 0x000000000008A000ULL, */ /* GP regs */ +/* 0x000000000008B000ULL, */ /* FIFO */ +/* 0x000000000008C000ULL, */ /* IRQ */ + +/* RX, the MIPI lane control regs start at offset 0 */ +const hrt_address RX_BASE[N_RX_ID] = { + 0x0000000000080100ULL +}; + +/* IBUF_CTRL, part of the Input System 2401 */ +const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { + 0x00000000000C1800ULL, /* ibuf controller A */ + 0x00000000000C3800ULL, /* ibuf controller B */ + 0x00000000000C5800ULL /* ibuf controller C */ +}; + +/* ISYS IRQ Controllers, part of the Input System 2401 */ +const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { + 0x00000000000C1400ULL, /* port a */ + 0x00000000000C3400ULL, /* port b */ + 0x00000000000C5400ULL /* port c */ +}; + +/* CSI FE, part of the Input System 2401 */ +const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { + 0x00000000000C0400ULL, /* csi fe controller A */ + 0x00000000000C2400ULL, /* csi fe controller B */ + 0x00000000000C4400ULL /* csi fe controller C */ +}; + +/* CSI BE, part of the Input System 2401 */ +const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { + 0x00000000000C0800ULL, /* csi be controller A */ + 0x00000000000C2800ULL, /* csi be controller B */ + 0x00000000000C4800ULL /* csi be controller C */ +}; + +/* PIXEL Generator, part of the Input System 2401 */ +const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { + 0x00000000000C1000ULL, /* pixel gen controller A */ + 0x00000000000C3000ULL, /* pixel gen controller B */ + 0x00000000000C5000ULL /* pixel gen controller C */ +}; + +/* Stream2MMIO, part of the Input System 2401 */ +const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { + 0x00000000000C0C00ULL, /* stream2mmio controller A */ + 0x00000000000C2C00ULL, /* stream2mmio controller B */ + 0x00000000000C4C00ULL /* stream2mmio controller C */ +}; diff --git a/drivers/staging/media/atomisp/pci/system_local.h b/drivers/staging/media/atomisp/pci/system_local.h index d60591e04b61..a47258c2e8a8 100644 --- a/drivers/staging/media/atomisp/pci/system_local.h +++ b/drivers/staging/media/atomisp/pci/system_local.h @@ -34,166 +34,70 @@ #define GP_FIFO_BASE ((hrt_address)0x0000000000090104) /* This is NOT a base address */ /* ISP */ -static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { - 0x0000000000020000ULL -}; - -static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { - 0x0000000000200000ULL -}; - -static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { - 0x0000000000100000ULL -}; +extern const hrt_address ISP_CTRL_BASE[N_ISP_ID]; +extern const hrt_address ISP_DMEM_BASE[N_ISP_ID]; +extern const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID]; /* SP */ -static const hrt_address SP_CTRL_BASE[N_SP_ID] = { - 0x0000000000010000ULL -}; - -static const hrt_address SP_DMEM_BASE[N_SP_ID] = { - 0x0000000000300000ULL -}; +extern const hrt_address SP_CTRL_BASE[N_SP_ID]; +extern const hrt_address SP_DMEM_BASE[N_SP_ID]; /* MMU */ -/* - * MMU0_ID: The data MMU - * MMU1_ID: The icache MMU - */ -static const hrt_address MMU_BASE[N_MMU_ID] = { - 0x0000000000070000ULL, - 0x00000000000A0000ULL -}; -/* DMA */ -static const hrt_address DMA_BASE[N_DMA_ID] = { - 0x0000000000040000ULL -}; +extern const hrt_address MMU_BASE[N_MMU_ID]; -static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { - 0x00000000000CA000ULL -}; +/* DMA */ +extern const hrt_address DMA_BASE[N_DMA_ID]; +extern const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID]; /* IRQ */ -static const hrt_address IRQ_BASE[N_IRQ_ID] = { - 0x0000000000000500ULL, - 0x0000000000030A00ULL, - 0x000000000008C000ULL, - 0x0000000000090200ULL -}; - -/* - 0x0000000000000500ULL}; - */ +extern const hrt_address IRQ_BASE[N_IRQ_ID]; /* GDC */ -static const hrt_address GDC_BASE[N_GDC_ID] = { - 0x0000000000050000ULL, - 0x0000000000060000ULL -}; +extern const hrt_address GDC_BASE[N_GDC_ID]; /* FIFO_MONITOR (not a subset of GP_DEVICE) */ -static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { - 0x0000000000000000ULL -}; - -/* -static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = { - 0x0000000000000000ULL}; - -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - 0x0000000000090000ULL}; -*/ +extern const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID]; /* GP_DEVICE (single base for all separate GP_REG instances) */ -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - 0x0000000000000000ULL -}; +extern const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID]; /*GP TIMER , all timer registers are inter-twined, * so, having multiple base addresses for * different timers does not help*/ -static const hrt_address GP_TIMER_BASE = - (hrt_address)0x0000000000000600ULL; +extern const hrt_address GP_TIMER_BASE; /* GPIO */ -static const hrt_address GPIO_BASE[N_GPIO_ID] = { - 0x0000000000000400ULL -}; +extern const hrt_address GPIO_BASE[N_GPIO_ID]; /* TIMED_CTRL */ -static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { - 0x0000000000000100ULL -}; +extern const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID]; /* INPUT_FORMATTER */ -static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { - 0x0000000000030000ULL, - 0x0000000000030200ULL, - 0x0000000000030400ULL, - 0x0000000000030600ULL -}; /* memcpy() */ +extern const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID]; /* INPUT_SYSTEM */ -static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { - 0x0000000000080000ULL -}; - -/* 0x0000000000081000ULL, */ /* capture A */ -/* 0x0000000000082000ULL, */ /* capture B */ -/* 0x0000000000083000ULL, */ /* capture C */ -/* 0x0000000000084000ULL, */ /* Acquisition */ -/* 0x0000000000085000ULL, */ /* DMA */ -/* 0x0000000000089000ULL, */ /* ctrl */ -/* 0x000000000008A000ULL, */ /* GP regs */ -/* 0x000000000008B000ULL, */ /* FIFO */ -/* 0x000000000008C000ULL, */ /* IRQ */ +extern const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID]; /* RX, the MIPI lane control regs start at offset 0 */ -static const hrt_address RX_BASE[N_RX_ID] = { - 0x0000000000080100ULL -}; +extern const hrt_address RX_BASE[N_RX_ID]; /* IBUF_CTRL, part of the Input System 2401 */ -static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { - 0x00000000000C1800ULL, /* ibuf controller A */ - 0x00000000000C3800ULL, /* ibuf controller B */ - 0x00000000000C5800ULL /* ibuf controller C */ -}; +extern const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID]; /* ISYS IRQ Controllers, part of the Input System 2401 */ -static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { - 0x00000000000C1400ULL, /* port a */ - 0x00000000000C3400ULL, /* port b */ - 0x00000000000C5400ULL /* port c */ -}; +extern const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID]; /* CSI FE, part of the Input System 2401 */ -static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { - 0x00000000000C0400ULL, /* csi fe controller A */ - 0x00000000000C2400ULL, /* csi fe controller B */ - 0x00000000000C4400ULL /* csi fe controller C */ -}; +extern const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID]; /* CSI BE, part of the Input System 2401 */ -static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { - 0x00000000000C0800ULL, /* csi be controller A */ - 0x00000000000C2800ULL, /* csi be controller B */ - 0x00000000000C4800ULL /* csi be controller C */ -}; +extern const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID]; /* PIXEL Generator, part of the Input System 2401 */ -static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { - 0x00000000000C1000ULL, /* pixel gen controller A */ - 0x00000000000C3000ULL, /* pixel gen controller B */ - 0x00000000000C5000ULL /* pixel gen controller C */ -}; +extern const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID]; /* Stream2MMIO, part of the Input System 2401 */ -static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { - 0x00000000000C0C00ULL, /* stream2mmio controller A */ - 0x00000000000C2C00ULL, /* stream2mmio controller B */ - 0x00000000000C4C00ULL /* stream2mmio controller C */ -}; +extern const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID]; #endif /* __SYSTEM_LOCAL_H_INCLUDED__ */ -- cgit v1.2.3 From 58ac3154b83938515129c20aa76d456a4c9202a8 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 26 Jun 2020 13:34:25 -0700 Subject: x86/entry: Actually disable stack protector Some builds of GCC enable stack protector by default. Simply removing the arguments is not sufficient to disable stack protector, as the stack protector for those GCC builds must be explicitly disabled. Remove the argument removals and add -fno-stack-protector. Additionally include missed x32 argument updates, and adjust whitespace for readability. Fixes: 20355e5f73a7 ("x86/entry: Exclude low level entry code from sanitizing") Signed-off-by: Kees Cook Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/202006261333.585319CA6B@keescook --- arch/x86/entry/Makefile | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/arch/x86/entry/Makefile b/arch/x86/entry/Makefile index b7a5790d8d63..08bf95dbc911 100644 --- a/arch/x86/entry/Makefile +++ b/arch/x86/entry/Makefile @@ -7,12 +7,20 @@ KASAN_SANITIZE := n UBSAN_SANITIZE := n KCOV_INSTRUMENT := n -CFLAGS_REMOVE_common.o = $(CC_FLAGS_FTRACE) -fstack-protector -fstack-protector-strong -CFLAGS_REMOVE_syscall_32.o = $(CC_FLAGS_FTRACE) -fstack-protector -fstack-protector-strong -CFLAGS_REMOVE_syscall_64.o = $(CC_FLAGS_FTRACE) -fstack-protector -fstack-protector-strong +CFLAGS_REMOVE_common.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_syscall_64.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_syscall_32.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_syscall_x32.o = $(CC_FLAGS_FTRACE) + +CFLAGS_common.o += -fno-stack-protector +CFLAGS_syscall_64.o += -fno-stack-protector +CFLAGS_syscall_32.o += -fno-stack-protector +CFLAGS_syscall_x32.o += -fno-stack-protector CFLAGS_syscall_64.o += $(call cc-option,-Wno-override-init,) CFLAGS_syscall_32.o += $(call cc-option,-Wno-override-init,) +CFLAGS_syscall_x32.o += $(call cc-option,-Wno-override-init,) + obj-y := entry_$(BITS).o thunk_$(BITS).o syscall_$(BITS).o obj-y += common.o -- cgit v1.2.3 From da05b143a308bd6a7a444401f9732678ae63fc70 Mon Sep 17 00:00:00 2001 From: Arvind Sankar Date: Tue, 14 Jul 2020 23:26:31 -0400 Subject: x86/boot: Don't add the EFI stub to targets vmlinux-objs-y is added to targets, which currently means that the EFI stub gets added to the targets as well. It shouldn't be added since it is built elsewhere. This confuses Makefile.build which interprets the EFI stub as a target $(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a and will create drivers/firmware/efi/libstub/ underneath arch/x86/boot/compressed, to hold this supposed target, if building out-of-tree. [0] Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y. [0] See scripts/Makefile.build near the end: # Create directories for object files if they do not exist Signed-off-by: Arvind Sankar Signed-off-by: Thomas Gleixner Reviewed-by: Masahiro Yamada Acked-by: Ard Biesheuvel Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu --- arch/x86/boot/compressed/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index 7619742f91c9..5a828fde7a42 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -90,8 +90,8 @@ endif vmlinux-objs-$(CONFIG_ACPI) += $(obj)/acpi.o -vmlinux-objs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_thunk_$(BITS).o +efi-obj-$(CONFIG_EFI_STUB) = $(objtree)/drivers/firmware/efi/libstub/lib.a # The compressed kernel is built with -fPIC/-fPIE so that a boot loader # can place it anywhere in memory and it will still run. However, since @@ -115,7 +115,7 @@ endef quiet_cmd_check-and-link-vmlinux = LD $@ cmd_check-and-link-vmlinux = $(cmd_check_data_rel); $(cmd_ld) -$(obj)/vmlinux: $(vmlinux-objs-y) FORCE +$(obj)/vmlinux: $(vmlinux-objs-y) $(efi-obj-y) FORCE $(call if_changed,check-and-link-vmlinux) OBJCOPYFLAGS_vmlinux.bin := -R .comment -S -- cgit v1.2.3 From 23988c9704f0e341d2e860476430aaf378efd129 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 16 Jul 2020 15:51:38 +0100 Subject: media: atomisp: fix mask and shift operation on ISPSSPM0 Currently the check on bits 25:24 on ISPSSPM0 is always 0 because the mask and shift operations are incorrect. Fix this by shifting by MRFLD_ISPSSPM0_ISPSSS_OFFSET (24 bits right) and then masking with RFLD_ISPSSPM0_ISPSSC_MASK (0x03) to get the appropriate 2 bits to check. Addresses-Coverity: ("Operands don't affect result") Fixes: 0f441fd70b1e ("media: atomisp: simplify the power down/up code") Signed-off-by: Colin Ian King Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c index 61dcf5cf4ed1..e31195816b2d 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c @@ -743,7 +743,7 @@ static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable) /* Wait until ISPSSPM0 bit[25:24] shows the right value */ iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, MRFLD_ISPSSPM0, &tmp); - tmp = (tmp & MRFLD_ISPSSPM0_ISPSSC_MASK) >> MRFLD_ISPSSPM0_ISPSSS_OFFSET; + tmp = (tmp >> MRFLD_ISPSSPM0_ISPSSS_OFFSET) & MRFLD_ISPSSPM0_ISPSSC_MASK; if (tmp == val) { trace_ipu_cstate(enable); return 0; -- cgit v1.2.3 From 0d6db85131e014c128e57649793aff5aa96e065f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 19 Jul 2020 13:29:18 +0200 Subject: Revert "media: atomisp: keep the ISP powered on when setting it" changeset d0213061a501 ("media: atomisp: fix mask and shift operation on ISPSSPM0") solved the existing issue with the IUNIT power on code. So, the driver can now use the right code again. This reverts commit 95d1f398c4dc3f55e9007c89452ccc16301205fc. Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c index e31195816b2d..a000a1e316f7 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c @@ -766,17 +766,13 @@ static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable) /* Workaround for pmu_nc_set_power_state not ready in MRFLD */ int atomisp_mrfld_power_down(struct atomisp_device *isp) { - return 0; -// FIXME: at least with ISP2401, the code below causes the driver to break -// return atomisp_mrfld_power(isp, false); + return atomisp_mrfld_power(isp, false); } /* Workaround for pmu_nc_set_power_state not ready in MRFLD */ int atomisp_mrfld_power_up(struct atomisp_device *isp) { - return 0; -// FIXME: at least with ISP2401, the code below causes the driver to break -// return atomisp_mrfld_power(isp, true); + return atomisp_mrfld_power(isp, true); } int atomisp_runtime_suspend(struct device *dev) -- cgit v1.2.3 From a35fffbf98189ba8359f19073286b2ea816255c5 Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Sat, 18 Jul 2020 15:06:09 +0200 Subject: net/smc: handle unexpected response types for confirm link A delete link could arrive during confirm link processing. Handle this situation directly in smc_llc_srv_conf_link() rather than using the logic in smc_llc_wait() to avoid the unexpected message handling there. Reviewed-by: Ursula Braun Fixes: 1551c95b6124 ("net/smc: final part of add link processing as SMC server") Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_llc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/smc/smc_llc.c b/net/smc/smc_llc.c index c1a038689c63..58f4da2e0cc7 100644 --- a/net/smc/smc_llc.c +++ b/net/smc/smc_llc.c @@ -1051,12 +1051,14 @@ static int smc_llc_srv_conf_link(struct smc_link *link, if (rc) return -ENOLINK; /* receive CONFIRM LINK response over the RoCE fabric */ - qentry = smc_llc_wait(lgr, link, SMC_LLC_WAIT_FIRST_TIME, - SMC_LLC_CONFIRM_LINK); - if (!qentry) { + qentry = smc_llc_wait(lgr, link, SMC_LLC_WAIT_FIRST_TIME, 0); + if (!qentry || + qentry->msg.raw.hdr.common.type != SMC_LLC_CONFIRM_LINK) { /* send DELETE LINK */ smc_llc_send_delete_link(link, link_new->link_id, SMC_LLC_REQ, false, SMC_LLC_DEL_LOST_PATH); + if (qentry) + smc_llc_flow_qentry_del(&lgr->llc_flow_lcl); return -ENOLINK; } smc_llc_save_peer_uid(qentry); -- cgit v1.2.3 From 68fd8942038f30dbb64a594dc15d9948289de42a Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Sat, 18 Jul 2020 15:06:10 +0200 Subject: net/smc: clear link during SMC client link down processing In a link-down condition we notify the SMC server and expect that the server will finally trigger the link clear processing on the client side. This could fail when anything along this notification path goes wrong. Clear the link as part of SMC client link-down processing to prevent dangling links. Reviewed-by: Ursula Braun Fixes: 541afa10c126 ("net/smc: add smcr_port_err() and smcr_link_down() processing") Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index f69d205b3e11..e286b3c8c962 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -1204,10 +1204,12 @@ static void smcr_link_down(struct smc_link *lnk) SMC_LLC_WAIT_TIME); mutex_lock(&lgr->llc_conf_mutex); } - if (!list_empty(&lgr->list)) + if (!list_empty(&lgr->list)) { smc_llc_send_delete_link(to_lnk, del_link_id, SMC_LLC_REQ, true, SMC_LLC_DEL_LOST_PATH); + smcr_link_clear(lnk, true); + } wake_up(&lgr->llc_flow_waiter); /* wake up next waiter */ } } -- cgit v1.2.3 From 7df8bcb56053173e5e5c0e566391fa601e3e4778 Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Sat, 18 Jul 2020 15:06:11 +0200 Subject: net/smc: fix link lookup for new rdma connections For new rdma connections the SMC server assigns the link and sends the link data in the clc accept message. To match the correct link use not only the qp_num but also the gid and the mac of the links. If there are equal qp_nums for different links the wrong link would be chosen. Reviewed-by: Ursula Braun Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow") Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/af_smc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 903321543838..f80591567a3d 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -632,7 +632,9 @@ static int smc_connect_rdma(struct smc_sock *smc, for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) { struct smc_link *l = &smc->conn.lgr->lnk[i]; - if (l->peer_qpn == ntoh24(aclc->qpn)) { + if (l->peer_qpn == ntoh24(aclc->qpn) && + !memcmp(l->peer_gid, &aclc->lcl.gid, SMC_GID_SIZE) && + !memcmp(l->peer_mac, &aclc->lcl.mac, sizeof(l->peer_mac))) { link = l; break; } -- cgit v1.2.3 From 63673597cca93ef6fa12414933da01d5806547af Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Sat, 18 Jul 2020 15:06:12 +0200 Subject: net/smc: protect smc ib device initialization Before an smc ib device is used the first time for an smc link it is lazily initialized. When there are 2 active link groups and a new ib device is brought online then it might happen that 2 link creations run in parallel and enter smc_ib_setup_per_ibdev(). Both allocate new send and receive completion queues on the device, but only one set of them keeps assigned and the other leaks. Fix that by protecting the setup and cleanup code using a mutex. Reviewed-by: Ursula Braun Fixes: f3c1deddb21c ("net/smc: separate function for link initialization") Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_ib.c | 16 +++++++++++++--- net/smc/smc_ib.h | 1 + 2 files changed, 14 insertions(+), 3 deletions(-) diff --git a/net/smc/smc_ib.c b/net/smc/smc_ib.c index 7637fdebbb78..1c314dbdc7fa 100644 --- a/net/smc/smc_ib.c +++ b/net/smc/smc_ib.c @@ -506,6 +506,10 @@ long smc_ib_setup_per_ibdev(struct smc_ib_device *smcibdev) int cqe_size_order, smc_order; long rc; + mutex_lock(&smcibdev->mutex); + rc = 0; + if (smcibdev->initialized) + goto out; /* the calculated number of cq entries fits to mlx5 cq allocation */ cqe_size_order = cache_line_size() == 128 ? 7 : 6; smc_order = MAX_ORDER - cqe_size_order - 1; @@ -517,7 +521,7 @@ long smc_ib_setup_per_ibdev(struct smc_ib_device *smcibdev) rc = PTR_ERR_OR_ZERO(smcibdev->roce_cq_send); if (IS_ERR(smcibdev->roce_cq_send)) { smcibdev->roce_cq_send = NULL; - return rc; + goto out; } smcibdev->roce_cq_recv = ib_create_cq(smcibdev->ibdev, smc_wr_rx_cq_handler, NULL, @@ -529,21 +533,26 @@ long smc_ib_setup_per_ibdev(struct smc_ib_device *smcibdev) } smc_wr_add_dev(smcibdev); smcibdev->initialized = 1; - return rc; + goto out; err: ib_destroy_cq(smcibdev->roce_cq_send); +out: + mutex_unlock(&smcibdev->mutex); return rc; } static void smc_ib_cleanup_per_ibdev(struct smc_ib_device *smcibdev) { + mutex_lock(&smcibdev->mutex); if (!smcibdev->initialized) - return; + goto out; smcibdev->initialized = 0; ib_destroy_cq(smcibdev->roce_cq_recv); ib_destroy_cq(smcibdev->roce_cq_send); smc_wr_remove_dev(smcibdev); +out: + mutex_unlock(&smcibdev->mutex); } static struct ib_client smc_ib_client; @@ -566,6 +575,7 @@ static int smc_ib_add_dev(struct ib_device *ibdev) INIT_WORK(&smcibdev->port_event_work, smc_ib_port_event_work); atomic_set(&smcibdev->lnk_cnt, 0); init_waitqueue_head(&smcibdev->lnks_deleted); + mutex_init(&smcibdev->mutex); mutex_lock(&smc_ib_devices.mutex); list_add_tail(&smcibdev->list, &smc_ib_devices.list); mutex_unlock(&smc_ib_devices.mutex); diff --git a/net/smc/smc_ib.h b/net/smc/smc_ib.h index ae6776e1e726..2ce481187dd0 100644 --- a/net/smc/smc_ib.h +++ b/net/smc/smc_ib.h @@ -52,6 +52,7 @@ struct smc_ib_device { /* ib-device infos for smc */ DECLARE_BITMAP(ports_going_away, SMC_MAX_PORTS); atomic_t lnk_cnt; /* number of links on ibdev */ wait_queue_head_t lnks_deleted; /* wait 4 removal of all links*/ + struct mutex mutex; /* protect dev setup+cleanup */ }; struct smc_buf_desc; -- cgit v1.2.3 From 2ff0867851a21ea1ccb0c275ae1df2fe7787e1b9 Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Sat, 18 Jul 2020 15:06:13 +0200 Subject: net/smc: drop out-of-flow llc response messages To be save from unexpected or late llc response messages check if the arrived message fits to the current flow type and drop out-of-flow messages. And drop it when there is already a response assigned to the flow. Reviewed-by: Ursula Braun Fixes: ef79d439cd12 ("net/smc: process llc responses in tasklet context") Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_llc.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/net/smc/smc_llc.c b/net/smc/smc_llc.c index 58f4da2e0cc7..78704f03e72a 100644 --- a/net/smc/smc_llc.c +++ b/net/smc/smc_llc.c @@ -1587,6 +1587,8 @@ again: static void smc_llc_rx_response(struct smc_link *link, struct smc_llc_qentry *qentry) { + enum smc_llc_flowtype flowtype = link->lgr->llc_flow_lcl.type; + struct smc_llc_flow *flow = &link->lgr->llc_flow_lcl; u8 llc_type = qentry->msg.raw.hdr.common.type; switch (llc_type) { @@ -1595,15 +1597,20 @@ static void smc_llc_rx_response(struct smc_link *link, complete(&link->llc_testlink_resp); break; case SMC_LLC_ADD_LINK: - case SMC_LLC_DELETE_LINK: - case SMC_LLC_CONFIRM_LINK: case SMC_LLC_ADD_LINK_CONT: + case SMC_LLC_CONFIRM_LINK: + if (flowtype != SMC_LLC_FLOW_ADD_LINK || flow->qentry) + break; /* drop out-of-flow response */ + goto assign; + case SMC_LLC_DELETE_LINK: + if (flowtype != SMC_LLC_FLOW_DEL_LINK || flow->qentry) + break; /* drop out-of-flow response */ + goto assign; case SMC_LLC_CONFIRM_RKEY: case SMC_LLC_DELETE_RKEY: - /* assign responses to the local flow, we requested them */ - smc_llc_flow_qentry_set(&link->lgr->llc_flow_lcl, qentry); - wake_up(&link->lgr->llc_msg_waiter); - return; + if (flowtype != SMC_LLC_FLOW_RKEY || flow->qentry) + break; /* drop out-of-flow response */ + goto assign; case SMC_LLC_CONFIRM_RKEY_CONT: /* not used because max links is 3 */ break; @@ -1612,6 +1619,11 @@ static void smc_llc_rx_response(struct smc_link *link, break; } kfree(qentry); + return; +assign: + /* assign responses to the local flow, we requested them */ + smc_llc_flow_qentry_set(&link->lgr->llc_flow_lcl, qentry); + wake_up(&link->lgr->llc_msg_waiter); } static void smc_llc_enqueue(struct smc_link *link, union smc_llc_msg *llc) -- cgit v1.2.3 From c48254fa48e5bad589fbbf1578dae960cedcafcf Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Sat, 18 Jul 2020 15:06:14 +0200 Subject: net/smc: move add link processing for new device into llc layer When a new ib device is up smc will send an add link invitation to the peer if needed. This is currently done with rudimentary flow control. Under high workload these add link invitations can disturb other llc flows because they arrive unexpected. Fix this by integrating the invitations into the normal llc event flow and handle them as a flow. While at it, check for already assigned requests in the flow before the new add link request is assigned. Reviewed-by: Ursula Braun Fixes: 1f90a05d9ff9 ("net/smc: add smcr_port_add() and smcr_link_up() processing") Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_core.c | 80 +++++------------------------------------------------- net/smc/smc_llc.c | 56 ++++++++++++++++++++++++++++++++++---- net/smc/smc_llc.h | 2 +- 3 files changed, 58 insertions(+), 80 deletions(-) diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index e286b3c8c962..2e965de7412d 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -45,18 +45,10 @@ static struct smc_lgr_list smc_lgr_list = { /* established link groups */ static atomic_t lgr_cnt = ATOMIC_INIT(0); /* number of existing link groups */ static DECLARE_WAIT_QUEUE_HEAD(lgrs_deleted); -struct smc_ib_up_work { - struct work_struct work; - struct smc_link_group *lgr; - struct smc_ib_device *smcibdev; - u8 ibport; -}; - static void smc_buf_free(struct smc_link_group *lgr, bool is_rmb, struct smc_buf_desc *buf_desc); static void __smc_lgr_terminate(struct smc_link_group *lgr, bool soft); -static void smc_link_up_work(struct work_struct *work); static void smc_link_down_work(struct work_struct *work); /* return head of link group list and its lock for a given link group */ @@ -1106,67 +1098,23 @@ static void smc_conn_abort_work(struct work_struct *work) sock_put(&smc->sk); /* sock_hold done by schedulers of abort_work */ } -/* link is up - establish alternate link if applicable */ -static void smcr_link_up(struct smc_link_group *lgr, - struct smc_ib_device *smcibdev, u8 ibport) -{ - struct smc_link *link = NULL; - - if (list_empty(&lgr->list) || - lgr->type == SMC_LGR_SYMMETRIC || - lgr->type == SMC_LGR_ASYMMETRIC_PEER) - return; - - if (lgr->role == SMC_SERV) { - /* trigger local add link processing */ - link = smc_llc_usable_link(lgr); - if (!link) - return; - smc_llc_srv_add_link_local(link); - } else { - /* invite server to start add link processing */ - u8 gid[SMC_GID_SIZE]; - - if (smc_ib_determine_gid(smcibdev, ibport, lgr->vlan_id, gid, - NULL)) - return; - if (lgr->llc_flow_lcl.type != SMC_LLC_FLOW_NONE) { - /* some other llc task is ongoing */ - wait_event_timeout(lgr->llc_flow_waiter, - (list_empty(&lgr->list) || - lgr->llc_flow_lcl.type == SMC_LLC_FLOW_NONE), - SMC_LLC_WAIT_TIME); - } - /* lgr or device no longer active? */ - if (!list_empty(&lgr->list) && - smc_ib_port_active(smcibdev, ibport)) - link = smc_llc_usable_link(lgr); - if (link) - smc_llc_send_add_link(link, smcibdev->mac[ibport - 1], - gid, NULL, SMC_LLC_REQ); - wake_up(&lgr->llc_flow_waiter); /* wake up next waiter */ - } -} - void smcr_port_add(struct smc_ib_device *smcibdev, u8 ibport) { - struct smc_ib_up_work *ib_work; struct smc_link_group *lgr, *n; list_for_each_entry_safe(lgr, n, &smc_lgr_list.list, list) { + struct smc_link *link; + if (strncmp(smcibdev->pnetid[ibport - 1], lgr->pnet_id, SMC_MAX_PNETID_LEN) || lgr->type == SMC_LGR_SYMMETRIC || lgr->type == SMC_LGR_ASYMMETRIC_PEER) continue; - ib_work = kmalloc(sizeof(*ib_work), GFP_KERNEL); - if (!ib_work) - continue; - INIT_WORK(&ib_work->work, smc_link_up_work); - ib_work->lgr = lgr; - ib_work->smcibdev = smcibdev; - ib_work->ibport = ibport; - schedule_work(&ib_work->work); + + /* trigger local add link processing */ + link = smc_llc_usable_link(lgr); + if (link) + smc_llc_add_link_local(link); } } @@ -1249,20 +1197,6 @@ void smcr_port_err(struct smc_ib_device *smcibdev, u8 ibport) } } -static void smc_link_up_work(struct work_struct *work) -{ - struct smc_ib_up_work *ib_work = container_of(work, - struct smc_ib_up_work, - work); - struct smc_link_group *lgr = ib_work->lgr; - - if (list_empty(&lgr->list)) - goto out; - smcr_link_up(lgr, ib_work->smcibdev, ib_work->ibport); -out: - kfree(ib_work); -} - static void smc_link_down_work(struct work_struct *work) { struct smc_link *link = container_of(work, struct smc_link, diff --git a/net/smc/smc_llc.c b/net/smc/smc_llc.c index 78704f03e72a..30da040ab5b6 100644 --- a/net/smc/smc_llc.c +++ b/net/smc/smc_llc.c @@ -895,6 +895,36 @@ out: return rc; } +/* as an SMC client, invite server to start the add_link processing */ +static void smc_llc_cli_add_link_invite(struct smc_link *link, + struct smc_llc_qentry *qentry) +{ + struct smc_link_group *lgr = smc_get_lgr(link); + struct smc_init_info ini; + + if (lgr->type == SMC_LGR_SYMMETRIC || + lgr->type == SMC_LGR_ASYMMETRIC_PEER) + goto out; + + ini.vlan_id = lgr->vlan_id; + smc_pnet_find_alt_roce(lgr, &ini, link->smcibdev); + if (!ini.ib_dev) + goto out; + + smc_llc_send_add_link(link, ini.ib_dev->mac[ini.ib_port - 1], + ini.ib_gid, NULL, SMC_LLC_REQ); +out: + kfree(qentry); +} + +static bool smc_llc_is_local_add_link(union smc_llc_msg *llc) +{ + if (llc->raw.hdr.common.type == SMC_LLC_ADD_LINK && + !llc->add_link.qp_mtu && !llc->add_link.link_num) + return true; + return false; +} + static void smc_llc_process_cli_add_link(struct smc_link_group *lgr) { struct smc_llc_qentry *qentry; @@ -902,7 +932,10 @@ static void smc_llc_process_cli_add_link(struct smc_link_group *lgr) qentry = smc_llc_flow_qentry_clr(&lgr->llc_flow_lcl); mutex_lock(&lgr->llc_conf_mutex); - smc_llc_cli_add_link(qentry->link, qentry); + if (smc_llc_is_local_add_link(&qentry->msg)) + smc_llc_cli_add_link_invite(qentry->link, qentry); + else + smc_llc_cli_add_link(qentry->link, qentry); mutex_unlock(&lgr->llc_conf_mutex); } @@ -1160,14 +1193,14 @@ static void smc_llc_process_srv_add_link(struct smc_link_group *lgr) mutex_unlock(&lgr->llc_conf_mutex); } -/* enqueue a local add_link req to trigger a new add_link flow, only as SERV */ -void smc_llc_srv_add_link_local(struct smc_link *link) +/* enqueue a local add_link req to trigger a new add_link flow */ +void smc_llc_add_link_local(struct smc_link *link) { struct smc_llc_msg_add_link add_llc = {0}; add_llc.hd.length = sizeof(add_llc); add_llc.hd.common.type = SMC_LLC_ADD_LINK; - /* no dev and port needed, we as server ignore client data anyway */ + /* no dev and port needed */ smc_llc_enqueue(link, (union smc_llc_msg *)&add_llc); } @@ -1347,7 +1380,7 @@ static void smc_llc_process_srv_delete_link(struct smc_link_group *lgr) if (lgr->type == SMC_LGR_SINGLE && !list_empty(&lgr->list)) { /* trigger setup of asymm alt link */ - smc_llc_srv_add_link_local(lnk); + smc_llc_add_link_local(lnk); } out: mutex_unlock(&lgr->llc_conf_mutex); @@ -1476,7 +1509,18 @@ static void smc_llc_event_handler(struct smc_llc_qentry *qentry) if (list_empty(&lgr->list)) goto out; /* lgr is terminating */ if (lgr->role == SMC_CLNT) { - if (lgr->llc_flow_lcl.type == SMC_LLC_FLOW_ADD_LINK) { + if (smc_llc_is_local_add_link(llc)) { + if (lgr->llc_flow_lcl.type == + SMC_LLC_FLOW_ADD_LINK) + break; /* add_link in progress */ + if (smc_llc_flow_start(&lgr->llc_flow_lcl, + qentry)) { + schedule_work(&lgr->llc_add_link_work); + } + return; + } + if (lgr->llc_flow_lcl.type == SMC_LLC_FLOW_ADD_LINK && + !lgr->llc_flow_lcl.qentry) { /* a flow is waiting for this message */ smc_llc_flow_qentry_set(&lgr->llc_flow_lcl, qentry); diff --git a/net/smc/smc_llc.h b/net/smc/smc_llc.h index a5d2fe3eea61..cc00a2ec4e92 100644 --- a/net/smc/smc_llc.h +++ b/net/smc/smc_llc.h @@ -103,7 +103,7 @@ void smc_llc_send_link_delete_all(struct smc_link_group *lgr, bool ord, u32 rsn); int smc_llc_cli_add_link(struct smc_link *link, struct smc_llc_qentry *qentry); int smc_llc_srv_add_link(struct smc_link *link); -void smc_llc_srv_add_link_local(struct smc_link *link); +void smc_llc_add_link_local(struct smc_link *link); int smc_llc_init(void) __init; #endif /* SMC_LLC_H */ -- cgit v1.2.3 From b9979c2e837926c87358024a95c67988477909b1 Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Sat, 18 Jul 2020 15:06:15 +0200 Subject: net/smc: fix handling of delete link requests As smc client the delete link requests are assigned to the flow when _any_ flow is active. This may break other flows that do not expect delete link requests during their handling. Fix that by assigning the request only when an add link flow is active. With that fix the code for smc client and smc server is the same, so remove the separate handling. Reviewed-by: Ursula Braun Fixes: 9ec6bf19ec8b ("net/smc: llc_del_link_work and use the LLC flow for delete link") Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_llc.c | 29 +++++++---------------------- 1 file changed, 7 insertions(+), 22 deletions(-) diff --git a/net/smc/smc_llc.c b/net/smc/smc_llc.c index 30da040ab5b6..fa8cd57a9b32 100644 --- a/net/smc/smc_llc.c +++ b/net/smc/smc_llc.c @@ -1544,28 +1544,13 @@ static void smc_llc_event_handler(struct smc_llc_qentry *qentry) } break; case SMC_LLC_DELETE_LINK: - if (lgr->role == SMC_CLNT) { - /* server requests to delete this link, send response */ - if (lgr->llc_flow_lcl.type != SMC_LLC_FLOW_NONE) { - /* DEL LINK REQ during ADD LINK SEQ */ - smc_llc_flow_qentry_set(&lgr->llc_flow_lcl, - qentry); - wake_up(&lgr->llc_msg_waiter); - } else if (smc_llc_flow_start(&lgr->llc_flow_lcl, - qentry)) { - schedule_work(&lgr->llc_del_link_work); - } - } else { - if (lgr->llc_flow_lcl.type == SMC_LLC_FLOW_ADD_LINK && - !lgr->llc_flow_lcl.qentry) { - /* DEL LINK REQ during ADD LINK SEQ */ - smc_llc_flow_qentry_set(&lgr->llc_flow_lcl, - qentry); - wake_up(&lgr->llc_msg_waiter); - } else if (smc_llc_flow_start(&lgr->llc_flow_lcl, - qentry)) { - schedule_work(&lgr->llc_del_link_work); - } + if (lgr->llc_flow_lcl.type == SMC_LLC_FLOW_ADD_LINK && + !lgr->llc_flow_lcl.qentry) { + /* DEL LINK REQ during ADD LINK SEQ */ + smc_llc_flow_qentry_set(&lgr->llc_flow_lcl, qentry); + wake_up(&lgr->llc_msg_waiter); + } else if (smc_llc_flow_start(&lgr->llc_flow_lcl, qentry)) { + schedule_work(&lgr->llc_del_link_work); } return; case SMC_LLC_CONFIRM_RKEY: -- cgit v1.2.3 From 741a49a4dc5fd7e61b37b259dde915083c2c5327 Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Sat, 18 Jul 2020 15:06:16 +0200 Subject: net/smc: do not call dma sync for unmapped memory The dma related ...sync_sg... functions check the link state before the dma function is actually called. But the check in smc_link_usable() allows links in ACTIVATING state which are not yet mapped to dma memory. Under high load it may happen that the sync_sg functions are called for such a link which results in an debug output like DMA-API: mlx5_core 0002:00:00.0: device driver tries to sync DMA memory it has not allocated [device address=0x0000000103370000] [size=65536 bytes] To fix that introduce a helper to check for the link state ACTIVE and use it where appropriate. And move the link state update to ACTIVATING to the end of smcr_link_init() when most initial setup is done. Reviewed-by: Ursula Braun Fixes: d854fcbfaeda ("net/smc: add new link state and related helpers") Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/af_smc.c | 2 +- net/smc/smc_core.c | 15 +++++++-------- net/smc/smc_core.h | 5 +++++ net/smc/smc_llc.c | 10 +++++----- 4 files changed, 18 insertions(+), 14 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index f80591567a3d..d091509b5982 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -352,7 +352,7 @@ static int smcr_lgr_reg_rmbs(struct smc_link *link, */ mutex_lock(&lgr->llc_conf_mutex); for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) { - if (lgr->lnk[i].state != SMC_LNK_ACTIVE) + if (!smc_link_active(&lgr->lnk[i])) continue; rc = smcr_link_reg_rmb(&lgr->lnk[i], rmb_desc); if (rc) diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index 2e965de7412d..42ba227f3e97 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -318,7 +318,6 @@ int smcr_link_init(struct smc_link_group *lgr, struct smc_link *lnk, get_device(&ini->ib_dev->ibdev->dev); atomic_inc(&ini->ib_dev->lnk_cnt); - lnk->state = SMC_LNK_ACTIVATING; lnk->link_id = smcr_next_link_id(lgr); lnk->lgr = lgr; lnk->link_idx = link_idx; @@ -354,6 +353,7 @@ int smcr_link_init(struct smc_link_group *lgr, struct smc_link *lnk, rc = smc_wr_create_link(lnk); if (rc) goto destroy_qp; + lnk->state = SMC_LNK_ACTIVATING; return 0; destroy_qp: @@ -542,8 +542,7 @@ struct smc_link *smc_switch_conns(struct smc_link_group *lgr, smc_wr_wakeup_tx_wait(from_lnk); for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) { - if (lgr->lnk[i].state != SMC_LNK_ACTIVE || - i == from_lnk->link_idx) + if (!smc_link_active(&lgr->lnk[i]) || i == from_lnk->link_idx) continue; if (is_dev_err && from_lnk->smcibdev == lgr->lnk[i].smcibdev && from_lnk->ibport == lgr->lnk[i].ibport) { @@ -1269,7 +1268,7 @@ static bool smcr_lgr_match(struct smc_link_group *lgr, return false; for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) { - if (lgr->lnk[i].state != SMC_LNK_ACTIVE) + if (!smc_link_active(&lgr->lnk[i])) continue; if ((lgr->role == SMC_SERV || lgr->lnk[i].peer_qpn == clcqpn) && !memcmp(lgr->lnk[i].peer_gid, &lcl->gid, SMC_GID_SIZE) && @@ -1717,14 +1716,14 @@ static int __smc_buf_create(struct smc_sock *smc, bool is_smcd, bool is_rmb) void smc_sndbuf_sync_sg_for_cpu(struct smc_connection *conn) { - if (!conn->lgr || conn->lgr->is_smcd || !smc_link_usable(conn->lnk)) + if (!conn->lgr || conn->lgr->is_smcd || !smc_link_active(conn->lnk)) return; smc_ib_sync_sg_for_cpu(conn->lnk, conn->sndbuf_desc, DMA_TO_DEVICE); } void smc_sndbuf_sync_sg_for_device(struct smc_connection *conn) { - if (!conn->lgr || conn->lgr->is_smcd || !smc_link_usable(conn->lnk)) + if (!conn->lgr || conn->lgr->is_smcd || !smc_link_active(conn->lnk)) return; smc_ib_sync_sg_for_device(conn->lnk, conn->sndbuf_desc, DMA_TO_DEVICE); } @@ -1736,7 +1735,7 @@ void smc_rmb_sync_sg_for_cpu(struct smc_connection *conn) if (!conn->lgr || conn->lgr->is_smcd) return; for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) { - if (!smc_link_usable(&conn->lgr->lnk[i])) + if (!smc_link_active(&conn->lgr->lnk[i])) continue; smc_ib_sync_sg_for_cpu(&conn->lgr->lnk[i], conn->rmb_desc, DMA_FROM_DEVICE); @@ -1750,7 +1749,7 @@ void smc_rmb_sync_sg_for_device(struct smc_connection *conn) if (!conn->lgr || conn->lgr->is_smcd) return; for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) { - if (!smc_link_usable(&conn->lgr->lnk[i])) + if (!smc_link_active(&conn->lgr->lnk[i])) continue; smc_ib_sync_sg_for_device(&conn->lgr->lnk[i], conn->rmb_desc, DMA_FROM_DEVICE); diff --git a/net/smc/smc_core.h b/net/smc/smc_core.h index c3ff512fd891..1c4d5439d0ff 100644 --- a/net/smc/smc_core.h +++ b/net/smc/smc_core.h @@ -349,6 +349,11 @@ static inline bool smc_link_usable(struct smc_link *lnk) return true; } +static inline bool smc_link_active(struct smc_link *lnk) +{ + return lnk->state == SMC_LNK_ACTIVE; +} + struct smc_sock; struct smc_clc_msg_accept_confirm; struct smc_clc_msg_local; diff --git a/net/smc/smc_llc.c b/net/smc/smc_llc.c index fa8cd57a9b32..df5b0a6ea848 100644 --- a/net/smc/smc_llc.c +++ b/net/smc/smc_llc.c @@ -428,7 +428,7 @@ static int smc_llc_send_confirm_rkey(struct smc_link *send_link, rtok_ix = 1; for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) { link = &send_link->lgr->lnk[i]; - if (link->state == SMC_LNK_ACTIVE && link != send_link) { + if (smc_link_active(link) && link != send_link) { rkeyllc->rtoken[rtok_ix].link_id = link->link_id; rkeyllc->rtoken[rtok_ix].rmb_key = htonl(rmb_desc->mr_rx[link->link_idx]->rkey); @@ -944,7 +944,7 @@ static int smc_llc_active_link_count(struct smc_link_group *lgr) int i, link_count = 0; for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) { - if (!smc_link_usable(&lgr->lnk[i])) + if (!smc_link_active(&lgr->lnk[i])) continue; link_count++; } @@ -1622,7 +1622,7 @@ static void smc_llc_rx_response(struct smc_link *link, switch (llc_type) { case SMC_LLC_TEST_LINK: - if (link->state == SMC_LNK_ACTIVE) + if (smc_link_active(link)) complete(&link->llc_testlink_resp); break; case SMC_LLC_ADD_LINK: @@ -1706,7 +1706,7 @@ static void smc_llc_testlink_work(struct work_struct *work) u8 user_data[16] = { 0 }; int rc; - if (link->state != SMC_LNK_ACTIVE) + if (!smc_link_active(link)) return; /* don't reschedule worker */ expire_time = link->wr_rx_tstamp + link->llc_testlink_time; if (time_is_after_jiffies(expire_time)) { @@ -1718,7 +1718,7 @@ static void smc_llc_testlink_work(struct work_struct *work) /* receive TEST LINK response over RoCE fabric */ rc = wait_for_completion_interruptible_timeout(&link->llc_testlink_resp, SMC_LLC_WAIT_TIME); - if (link->state != SMC_LNK_ACTIVE) + if (!smc_link_active(link)) return; /* link state changed */ if (rc <= 0) { smcr_link_down_cond_sched(link); -- cgit v1.2.3 From fd7f3a746582e8b17c48d4d8087d38c91f59ba67 Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Sat, 18 Jul 2020 15:06:17 +0200 Subject: net/smc: remove freed buffer from list Two buffers are allocated for each SMC connection. Each buffer is added to a buffer list after creation. When the second buffer allocation fails, the first buffer is freed but not deleted from the list. This might result in crashes when another connection picks up the freed buffer later and starts to work with it. Reviewed-by: Ursula Braun Fixes: 6511aad3f039 ("net/smc: change smc_buf_free function parameters") Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index 42ba227f3e97..ca3dc6af73af 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -1772,8 +1772,12 @@ int smc_buf_create(struct smc_sock *smc, bool is_smcd) return rc; /* create rmb */ rc = __smc_buf_create(smc, is_smcd, true); - if (rc) + if (rc) { + mutex_lock(&smc->conn.lgr->sndbufs_lock); + list_del(&smc->conn.sndbuf_desc->list); + mutex_unlock(&smc->conn.lgr->sndbufs_lock); smc_buf_free(smc->conn.lgr, false, smc->conn.sndbuf_desc); + } return rc; } -- cgit v1.2.3 From 1ad24058335427d046b2e5666bcd15a62ad9e242 Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Sat, 18 Jul 2020 15:06:18 +0200 Subject: net/smc: fix restoring of fallback changes When a listen socket is closed then all non-accepted sockets in its accept queue are to be released. Inside __smc_release() the helper smc_restore_fallback_changes() restores the changes done to the socket without to check if the clcsocket has a file set. This can result in a crash. Fix this by checking the file pointer first. Reviewed-by: Ursula Braun Fixes: f536dffc0b79 ("net/smc: fix closing of fallback SMC sockets") Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/af_smc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index d091509b5982..1163d51196da 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -126,8 +126,10 @@ EXPORT_SYMBOL_GPL(smc_proto6); static void smc_restore_fallback_changes(struct smc_sock *smc) { - smc->clcsock->file->private_data = smc->sk.sk_socket; - smc->clcsock->file = NULL; + if (smc->clcsock->file) { /* non-accepted sockets have no file yet */ + smc->clcsock->file->private_data = smc->sk.sk_socket; + smc->clcsock->file = NULL; + } } static int __smc_release(struct smc_sock *smc) -- cgit v1.2.3 From ba47d845d715a010f7b51f6f89bae32845e6acb7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 19 Jul 2020 15:41:18 -0700 Subject: Linux 5.8-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 0b5f8538bde5..249a51d25c63 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 8 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Kleptomaniac Octopus # *DOCUMENTATION* -- cgit v1.2.3 From 5714ee50bb4375bd586858ad800b1d9772847452 Mon Sep 17 00:00:00 2001 From: Kevin Buettner Date: Sat, 18 Jul 2020 00:20:03 -0700 Subject: copy_xstate_to_kernel: Fix typo which caused GDB regression This fixes a regression encountered while running the gdb.base/corefile.exp test in GDB's test suite. In my testing, the typo prevented the sw_reserved field of struct fxregs_state from being output to the kernel XSAVES area. Thus the correct mask corresponding to XCR0 was not present in the core file for GDB to interrogate, resulting in the following behavior: [kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/corefile/corefile testsuite/outputs/gdb.base/corefile/corefile.core Reading symbols from testsuite/outputs/gdb.base/corefile/corefile... [New LWP 232880] warning: Unexpected size of section `.reg-xstate/232880' in core file. With the typo fixed, the test works again as expected. Signed-off-by: Kevin Buettner Fixes: 9e4636545933 ("copy_xstate_to_kernel(): don't leave parts of destination uninitialized") Cc: Al Viro Cc: Dave Airlie Signed-off-by: Linus Torvalds --- arch/x86/kernel/fpu/xstate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c index bda2e5eaca0e..ad3a2b37927d 100644 --- a/arch/x86/kernel/fpu/xstate.c +++ b/arch/x86/kernel/fpu/xstate.c @@ -1074,7 +1074,7 @@ int copy_xstate_to_kernel(void *kbuf, struct xregs_state *xsave, unsigned int of copy_part(offsetof(struct fxregs_state, st_space), 128, &xsave->i387.st_space, &kbuf, &offset_start, &count); if (header.xfeatures & XFEATURE_MASK_SSE) - copy_part(xstate_offsets[XFEATURE_MASK_SSE], 256, + copy_part(xstate_offsets[XFEATURE_SSE], 256, &xsave->i387.xmm_space, &kbuf, &offset_start, &count); /* * Fill xsave->i387.sw_reserved value for ptrace frame: -- cgit v1.2.3 From f3f90c6db188d437add55aaffadd5ad5bcb8cda6 Mon Sep 17 00:00:00 2001 From: Qiang Yu Date: Sun, 19 Jul 2020 15:30:50 +0800 Subject: drm/lima: fix wait pp reset timeout PP bcast is marked as doing async reset after job is done. When resume after suspend, each PP is reset individually, so no need to reset in PP bcast resume. But I forgot to clear the PP bcast async reset mark so call into async wait before job run and gets timeout. Closes: https://gitlab.freedesktop.org/lima/linux/-/issues/34 Fixes: 3446d7e9883d ("drm/lima: add resume/suspend callback for each ip") Reviewed-by: Erico Nunes Signed-off-by: Qiang Yu Link: https://patchwork.freedesktop.org/patch/msgid/20200719073050.776962-1-yuq825@gmail.com --- drivers/gpu/drm/lima/lima_pp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/lima/lima_pp.c b/drivers/gpu/drm/lima/lima_pp.c index 33f01383409c..a5c95bed08c0 100644 --- a/drivers/gpu/drm/lima/lima_pp.c +++ b/drivers/gpu/drm/lima/lima_pp.c @@ -271,6 +271,8 @@ void lima_pp_fini(struct lima_ip *ip) int lima_pp_bcast_resume(struct lima_ip *ip) { + /* PP has been reset by individual PP resume */ + ip->data.async_reset = false; return 0; } -- cgit v1.2.3 From fad58190c0ffd72c394722928cd3e919b6e18357 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 19 Jul 2020 12:00:35 +0100 Subject: net: dsa: mv88e6xxx: fix in-band AN link establishment If in-band negotiation or fixed-link modes are specified for a DSA port, the DSA code will force the link down during initialisation. For fixed-link mode, this is fine, as phylink will manage the link state. However, for in-band mode, phylink expects the PCS to detect link, which will not happen if the link is forced down. There is a related issue that in in-band mode, the link could come up while we are making configuration changes, so we should force the link down prior to reconfiguring the interface mode. This patch addresses both issues. Fixes: 3be98b2d5fbc ("net: dsa: Down cpu/dsa ports phylink will control") Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 22 +++++++++++++++++++--- drivers/net/dsa/mv88e6xxx/chip.h | 1 + 2 files changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 7627ea61e0ea..fee16c947c2e 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -664,8 +664,11 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port, const struct phylink_link_state *state) { struct mv88e6xxx_chip *chip = ds->priv; + struct mv88e6xxx_port *p; int err; + p = &chip->ports[port]; + /* FIXME: is this the correct test? If we're in fixed mode on an * internal port, why should we process this any different from * PHY mode? On the other hand, the port may be automedia between @@ -675,10 +678,14 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port, return; mv88e6xxx_reg_lock(chip); - /* FIXME: should we force the link down here - but if we do, how - * do we restore the link force/unforce state? The driver layering - * gets in the way. + /* In inband mode, the link may come up at any time while the link + * is not forced down. Force the link down while we reconfigure the + * interface mode. */ + if (mode == MLO_AN_INBAND && p->interface != state->interface && + chip->info->ops->port_set_link) + chip->info->ops->port_set_link(chip, port, LINK_FORCED_DOWN); + err = mv88e6xxx_port_config_interface(chip, port, state->interface); if (err && err != -EOPNOTSUPP) goto err_unlock; @@ -691,6 +698,15 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port, if (err > 0) err = 0; + /* Undo the forced down state above after completing configuration + * irrespective of its state on entry, which allows the link to come up. + */ + if (mode == MLO_AN_INBAND && p->interface != state->interface && + chip->info->ops->port_set_link) + chip->info->ops->port_set_link(chip, port, LINK_UNFORCED); + + p->interface = state->interface; + err_unlock: mv88e6xxx_reg_unlock(chip); diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index e5430cf2ad71..6476524e8239 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -232,6 +232,7 @@ struct mv88e6xxx_port { u64 atu_full_violation; u64 vtu_member_violation; u64 vtu_miss_violation; + phy_interface_t interface; u8 cmode; bool mirror_ingress; bool mirror_egress; -- cgit v1.2.3 From 7c6719a1aaca51ffd7cdf3905e70aa8313f6ef26 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 19 Jul 2020 12:00:40 +0100 Subject: arm64: dts: clearfog-gt-8k: fix switch link configuration The commit below caused a regression for clearfog-gt-8k, where the link between the switch and the host does not come up. Investigation revealed two issues: - MV88E6xxx DSA no longer allows an in-band link to come up as the link is programmed to be forced down. Commit "net: dsa: mv88e6xxx: fix in-band AN link establishment" addresses this. - The dts configured dissimilar link modes at each end of the host to switch link; the host was configured using a fixed link (so has no in-band status) and the switch was configured to expect in-band status. With both issues fixed, the regression is resolved. Fixes: 34b5e6a33c1a ("net: dsa: mv88e6xxx: Configure MAC when using fixed link") Reported-by: Martin Rowe Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index c8243da71041..eb01cc96ba7a 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -454,10 +454,7 @@ status = "okay"; phy-mode = "2500base-x"; phys = <&cp1_comphy5 2>; - fixed-link { - speed = <2500>; - full-duplex; - }; + managed = "in-band-status"; }; &cp1_spi1 { -- cgit v1.2.3 From 544f287b84959203367cd29e16e772717612fab4 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Sun, 19 Jul 2020 12:11:24 +0000 Subject: bonding: check error value of register_netdevice() immediately If register_netdevice() is failed, net_device should not be used because variables are uninitialized or freed. So, the routine should be stopped immediately. But, bond_create() doesn't check return value of register_netdevice() immediately. That will result in a panic because of using uninitialized or freed memory. Test commands: modprobe netdev-notifier-error-inject echo -22 > /sys/kernel/debug/notifier-error-inject/netdev/\ actions/NETDEV_REGISTER/error modprobe bonding max_bonds=3 Splat looks like: [ 375.028492][ T193] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [ 375.033207][ T193] CPU: 2 PID: 193 Comm: kworker/2:2 Not tainted 5.8.0-rc4+ #645 [ 375.036068][ T193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 375.039673][ T193] Workqueue: events linkwatch_event [ 375.041557][ T193] RIP: 0010:dev_activate+0x4a/0x340 [ 375.043381][ T193] Code: 40 a8 04 0f 85 db 00 00 00 8b 83 08 04 00 00 85 c0 0f 84 0d 01 00 00 31 d2 89 d0 48 8d 04 40 48 c1 e0 07 48 03 83 00 04 00 00 <48> 8b 48 10 f6 41 10 01 75 08 f0 80 a1 a0 01 00 00 fd 48 89 48 08 [ 375.050267][ T193] RSP: 0018:ffff9f8facfcfdd8 EFLAGS: 00010202 [ 375.052410][ T193] RAX: 6b6b6b6b6b6b6b6b RBX: ffff9f8fae6ea000 RCX: 0000000000000006 [ 375.055178][ T193] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f8fae6ea000 [ 375.057762][ T193] RBP: ffff9f8fae6ea000 R08: 0000000000000000 R09: 0000000000000000 [ 375.059810][ T193] R10: 0000000000000001 R11: 0000000000000000 R12: ffff9f8facfcfe08 [ 375.061892][ T193] R13: ffffffff883587e0 R14: 0000000000000000 R15: ffff9f8fae6ea580 [ 375.063931][ T193] FS: 0000000000000000(0000) GS:ffff9f8fbae00000(0000) knlGS:0000000000000000 [ 375.066239][ T193] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 375.067841][ T193] CR2: 00007f2f542167a0 CR3: 000000012cee6002 CR4: 00000000003606e0 [ 375.069657][ T193] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 375.071471][ T193] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 375.073269][ T193] Call Trace: [ 375.074005][ T193] linkwatch_do_dev+0x4d/0x50 [ 375.075052][ T193] __linkwatch_run_queue+0x10b/0x200 [ 375.076244][ T193] linkwatch_event+0x21/0x30 [ 375.077274][ T193] process_one_work+0x252/0x600 [ 375.078379][ T193] ? process_one_work+0x600/0x600 [ 375.079518][ T193] worker_thread+0x3c/0x380 [ 375.080534][ T193] ? process_one_work+0x600/0x600 [ 375.081668][ T193] kthread+0x139/0x150 [ 375.082567][ T193] ? kthread_park+0x90/0x90 [ 375.083567][ T193] ret_from_fork+0x22/0x30 Fixes: e826eafa65c6 ("bonding: Call netif_carrier_off after register_netdevice") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 004919aea5fb..f88cb097b022 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -5053,15 +5053,19 @@ int bond_create(struct net *net, const char *name) bond_dev->rtnl_link_ops = &bond_link_ops; res = register_netdevice(bond_dev); + if (res < 0) { + free_netdev(bond_dev); + rtnl_unlock(); + + return res; + } netif_carrier_off(bond_dev); bond_work_init_all(bond); rtnl_unlock(); - if (res < 0) - free_netdev(bond_dev); - return res; + return 0; } static int __net_init bond_net_init(struct net *net) -- cgit v1.2.3 From 19dc36548be2027cb5a491511bc152493c1244bb Mon Sep 17 00:00:00 2001 From: "Alexander A. Klimov" Date: Sun, 19 Jul 2020 13:31:42 +0200 Subject: net: ieee802154: adf7242: Replace HTTP links with HTTPS ones Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Link: https://lore.kernel.org/r/20200719113142.58304-1-grandmaster@al2klimov.de Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/adf7242.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c index 8dbccec6ac86..c11f32f644db 100644 --- a/drivers/net/ieee802154/adf7242.c +++ b/drivers/net/ieee802154/adf7242.c @@ -4,7 +4,7 @@ * * Copyright 2009-2017 Analog Devices Inc. * - * http://www.analog.com/ADF7242 + * https://www.analog.com/ADF7242 */ #include -- cgit v1.2.3 From 01b2651cfb20ba38429cdb47c68f36e56a2d3cb4 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Mon, 20 Jul 2020 17:52:52 +0900 Subject: zonefs: Fix compilation warning Avoid the compilation warning "Variable 'ret' is reassigned a value before the old one has been used." in zonefs_create_zgroup() by setting ret for the error path only if an error happens. Reported-by: kernel test robot Signed-off-by: Damien Le Moal --- fs/zonefs/super.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c index 07bc42d62673..e419833107b2 100644 --- a/fs/zonefs/super.c +++ b/fs/zonefs/super.c @@ -1119,7 +1119,7 @@ static int zonefs_create_zgroup(struct zonefs_zone_data *zd, char *file_name; struct dentry *dir; unsigned int n = 0; - int ret = -ENOMEM; + int ret; /* If the group is empty, there is nothing to do */ if (!zd->nr_zones[type]) @@ -1135,8 +1135,10 @@ static int zonefs_create_zgroup(struct zonefs_zone_data *zd, zgroup_name = "seq"; dir = zonefs_create_inode(sb->s_root, zgroup_name, NULL, type); - if (!dir) + if (!dir) { + ret = -ENOMEM; goto free; + } /* * The first zone contains the super block: skip it. @@ -1174,8 +1176,10 @@ static int zonefs_create_zgroup(struct zonefs_zone_data *zd, * Use the file number within its group as file name. */ snprintf(file_name, ZONEFS_NAME_MAX - 1, "%u", n); - if (!zonefs_create_inode(dir, file_name, zone, type)) + if (!zonefs_create_inode(dir, file_name, zone, type)) { + ret = -ENOMEM; goto free; + } n++; } -- cgit v1.2.3 From 89ee72376be23a1029a0c65eff8838c262b01d65 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Thu, 16 Jul 2020 19:37:23 +0900 Subject: zonefs: count pages after truncating the iterator Count pages after possibly truncating the iterator to the maximum zone append size, not before. Signed-off-by: Johannes Thumshirn Signed-off-by: Damien Le Moal --- fs/zonefs/super.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c index e419833107b2..abfb17f88f9a 100644 --- a/fs/zonefs/super.c +++ b/fs/zonefs/super.c @@ -607,14 +607,14 @@ static ssize_t zonefs_file_dio_append(struct kiocb *iocb, struct iov_iter *from) int nr_pages; ssize_t ret; - nr_pages = iov_iter_npages(from, BIO_MAX_PAGES); - if (!nr_pages) - return 0; - max = queue_max_zone_append_sectors(bdev_get_queue(bdev)); max = ALIGN_DOWN(max << SECTOR_SHIFT, inode->i_sb->s_blocksize); iov_iter_truncate(from, max); + nr_pages = iov_iter_npages(from, BIO_MAX_PAGES); + if (!nr_pages) + return 0; + bio = bio_alloc_bioset(GFP_NOFS, nr_pages, &fs_bio_set); if (!bio) return -ENOMEM; -- cgit v1.2.3 From 92f53e2fda8bb9a559ad61d57bfb397ce67ed0ab Mon Sep 17 00:00:00 2001 From: Mark O'Donovan Date: Sat, 11 Jul 2020 05:33:24 +0100 Subject: ath9k: Fix regression with Atheros 9271 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fix allows ath9k_htc modules to connect to WLAN once again. Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251 Signed-off-by: Mark O'Donovan Reported-by: Roman Mamedov Tested-by: Viktor Jägersküpper Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net --- drivers/net/wireless/ath/ath9k/hif_usb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 4ed21dad6a8e..3f563e02d17d 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -733,11 +733,13 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb) return; } + rx_buf->skb = nskb; + usb_fill_int_urb(urb, hif_dev->udev, usb_rcvintpipe(hif_dev->udev, USB_REG_IN_PIPE), nskb->data, MAX_REG_IN_BUF_SIZE, - ath9k_hif_usb_reg_in_cb, nskb, 1); + ath9k_hif_usb_reg_in_cb, rx_buf, 1); } resubmit: -- cgit v1.2.3 From b5ba46b81c2fef00bcf110777fb6d51befa4a23e Mon Sep 17 00:00:00 2001 From: Alessio Bonfiglio Date: Tue, 14 Jul 2020 11:19:11 +0200 Subject: iwlwifi: Make some Killer Wireless-AC 1550 cards work again Fix the regression introduced by commit c8685937d07f ("iwlwifi: move pu devices to new table") by adding the ids and the configurations of two missing Killer 1550 cards in order to configure and let them work correctly again (following the new table convention). Resolve bug 208141 ("Wireless ac 9560 not working kernel 5.7.2", https://bugzilla.kernel.org/show_bug.cgi?id=208141). Fixes: c8685937d07f ("iwlwifi: move pu devices to new table") Signed-off-by: Alessio Bonfiglio Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200714091911.4442-1-alessio.bonfiglio@mail.polimi.it --- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index 65d65c6baf4c..e02bafb8921f 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -582,6 +582,8 @@ static const struct iwl_dev_info iwl_dev_info_table[] = { IWL_DEV_INFO(0x30DC, 0x1552, iwl9560_2ac_cfg_soc, iwl9560_killer_1550i_name), IWL_DEV_INFO(0x31DC, 0x1551, iwl9560_2ac_cfg_soc, iwl9560_killer_1550s_name), IWL_DEV_INFO(0x31DC, 0x1552, iwl9560_2ac_cfg_soc, iwl9560_killer_1550i_name), + IWL_DEV_INFO(0xA370, 0x1551, iwl9560_2ac_cfg_soc, iwl9560_killer_1550s_name), + IWL_DEV_INFO(0xA370, 0x1552, iwl9560_2ac_cfg_soc, iwl9560_killer_1550i_name), IWL_DEV_INFO(0x271C, 0x0214, iwl9260_2ac_cfg, iwl9260_1_name), -- cgit v1.2.3 From 1cfd3426ef989b83fa6176490a38777057e57f6c Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 14 Jul 2020 22:58:02 +0200 Subject: ath10k: Fix NULL pointer dereference in AHB device probe This fixes a NULL pointer dereference in the probe path for AHB devices. There attr parameter in the ath10k_ce_alloc_pipe() function is not initialized, but accessed. This function is called by ath10k_pci_setup_resource() which is called by ath10k_ahb_probe(). The struct ath10k_pci is also used for AHB devices and not only for PCI devices. The initialization of the new members of struct ath10k_pci is moved to ath10k_pci_setup_resource() which is used by the PCI and the AHB code. This also fixes a use after free bug in ath10k_pci_remove() when ar_pci is accessed after ath10k_core_destroy() was called, which calls ieee80211_free_hw() and frees this memory. This fixes the following bug seen with backports-5.8-rc2 on OpenWrt on a IPQ4019 device: [ 11.117462] 8<--- cut here --- [ 11.117494] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 11.119510] pgd = f377fd58 [ 11.127657] [00000000] *pgd=8e9a0835, *pte=00000000, *ppte=00000000 [ 11.130206] Internal error: Oops: 17 [#1] SMP ARM [ 11.136339] Modules linked in: ath10k_pci(+) ath10k_core ath xt_state xt_nat xt_conntrack xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD pppox ppp_generic nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_multiport xt_mark xt_mac xt_limit xt_comment xt_TCPMSS xt_LOG slhc nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom gpio_button_hotplug [ 11.174355] CPU: 2 PID: 257 Comm: kmodloader Not tainted 5.4.51 #0 [ 11.196585] Hardware name: Generic DT based system [ 11.202746] PC is at ath10k_ce_alloc_pipe+0x58/0x180 [ath10k_core] [ 11.207459] LR is at ath10k_pci_alloc_pipes+0x94/0xc8 [ath10k_pci] [ 11.213600] pc : [] lr : [] psr: 80000013 [ 11.219760] sp : cea0dc90 ip : cf4001f0 fp : 00000001 [ 11.225923] r10: 00000000 r9 : 00000018 r8 : ce4963b4 [ 11.231133] r7 : 00000000 r6 : ce491ea0 r5 : 00000000 r4 : ce4963b4 [ 11.236342] r3 : 0004a000 r2 : 0004a000 r1 : bf2d0d70 r0 : 00000006 [ 11.242942] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 11.249452] Control: 10c5387d Table: 8e9c006a DAC: 00000051 [ 11.256656] Process kmodloader (pid: 257, stack limit = 0xaba286ca) [ 11.262386] Stack: (0xcea0dc90 to 0xcea0e000) [ 11.268462] dc80: 00000000 ce49629c ce491ea0 ce4963bc [ 11.272984] dca0: ce495ea0 bf2fbf98 00000002 ce4963a8 ce495ea0 00000000 ce491ea0 cf95d800 [ 11.281142] dcc0: cf95d810 cf95d810 00000001 bf2fc854 00000000 cf95d800 bf300748 ce495ea0 [ 11.289304] dce0: ce491ea0 d1300000 cf95d800 bf2fde8c 00000000 00000001 ce49cea0 00000000 [ 11.297462] dd00: 00000000 00000000 bf3010a0 cf95d810 bf3010a0 c0b61580 00000000 00000000 [ 11.305624] dd20: bf3010a0 0000000b c0b04e48 c06110c8 c0b61588 cf95d810 c0b61580 c060f740 [ 11.313781] dd40: cf95d810 00000000 bf3010a0 00000000 00000000 ce49d2a4 bf301100 c060fc90 [ 11.321943] dd60: 00000000 bf3010a0 cf95d810 c060fcf0 cf95d810 bf3010a0 c060fc98 c060dca4 [ 11.330101] dd80: cf809d58 cf952cb4 bf3010a0 ce967900 c0b1f2c8 c060ec28 bf3007b8 bf301038 [ 11.338263] dda0: bf3010a0 bf3010a0 c0b2d4d4 ffffe000 bf304000 c0610278 c0b04e48 c0b2d4d4 [ 11.346422] ddc0: ffffe000 bf2fe2b4 c0b04e48 bf30403c c0b04e48 c0302764 8040003f 00000001 [ 11.354582] dde0: 38e38e39 ce513580 c0b2cb50 cf801e00 cffbc6ac ce513600 cf801e00 cffbc6ac [ 11.362740] de00: 8040003e ce49d280 00000001 c0428d54 00000001 cf801e00 cffbc6ac ce513580 [ 11.370900] de20: ce49d280 0e391998 bf301100 ce49d340 d12d2000 ce49d280 00000001 c0398c2c [ 11.379061] de40: 00000001 cea0df34 cea0df34 00000001 d12d2000 c039ae48 bf30110c 00007fff [ 11.387221] de60: bf301100 c0398044 cf804028 bf301148 c0397674 bf30126c c08ee5c0 c08ee70c [ 11.395380] de80: bf30110c c0b04e48 c08ee518 00000000 c08ee570 c0b04e48 ce513600 fffff000 [ 11.403540] dea0: 00000001 ce513580 0000000d 0000000d 00000000 00000000 00000000 00000000 [ 11.411698] dec0: 00000000 00000000 6e72656b 00006c65 00000000 00000000 00000000 00000000 [ 11.419858] dee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 11.428018] df00: 00000000 0e391998 00000000 0000c610 d12de610 00000000 0062c620 ffffe000 [ 11.436180] df20: 000129d1 00000051 00000000 c039b228 00000000 d12d7afd d12d8e80 d12d2000 [ 11.444337] df40: 0000c610 d12de0e8 d12ddfa8 d12dab74 00009000 00009570 00003a2c 00009cae [ 11.452498] df60: 00000000 00000000 00000000 00003a1c 0000001e 0000001f 00000018 00000000 [ 11.460656] df80: 00000010 00000000 00000000 00000000 00000003 00000080 c0301204 cea0c000 [ 11.468817] dfa0: 00000080 c0301000 00000000 00000000 00620010 0000c610 000129d1 00000014 [ 11.476975] dfc0: 00000000 00000000 00000003 00000080 0000c610 00000000 b6fc1d20 00000000 [ 11.485137] dfe0: bef0ad14 bef0acf8 00011e14 b6f74c94 60000010 00620010 00000000 00000000 [ 11.493390] [] (ath10k_ce_alloc_pipe [ath10k_core]) from [] (ath10k_pci_alloc_pipes+0x94/0xc8 [ath10k_pci]) [ 11.501498] [] (ath10k_pci_alloc_pipes [ath10k_pci]) from [] (ath10k_pci_setup_resource+0xb8/0xf0 [ath10k_pci]) [ 11.512773] [] (ath10k_pci_setup_resource [ath10k_pci]) from [] (ath10k_ahb_probe+0x32c/0x670 [ath10k_pci]) [ 11.524566] [] (ath10k_ahb_probe [ath10k_pci]) from [] (platform_drv_probe+0x34/0x70) [ 11.536016] [] (platform_drv_probe) from [] (really_probe+0x1f0/0x358) [ 11.545729] [] (really_probe) from [] (device_driver_attach+0x58/0x60) [ 11.553886] [] (device_driver_attach) from [] (__driver_attach+0x58/0xcc) [ 11.562134] [] (__driver_attach) from [] (bus_for_each_dev+0x68/0x8c) [ 11.570731] [] (bus_for_each_dev) from [] (bus_add_driver+0x1c8/0x1d8) [ 11.578886] [] (bus_add_driver) from [] (driver_register+0x74/0x108) [ 11.587060] [] (driver_register) from [] (ath10k_ahb_init+0x18/0x38 [ath10k_pci]) [ 11.595320] [] (ath10k_ahb_init [ath10k_pci]) from [] (init_module+0x3c/0x1000 [ath10k_pci]) [ 11.604432] [] (init_module [ath10k_pci]) from [] (do_one_initcall+0x84/0x1d8) [ 11.614657] [] (do_one_initcall) from [] (do_init_module+0x5c/0x228) [ 11.623421] [] (do_init_module) from [] (load_module+0x1fc8/0x224c) [ 11.631663] [] (load_module) from [] (sys_init_module+0x15c/0x17c) [ 11.639390] [] (sys_init_module) from [] (ret_fast_syscall+0x0/0x54) [ 11.647370] Exception stack(0xcea0dfa8 to 0xcea0dff0) [ 11.655615] dfa0: 00000000 00000000 00620010 0000c610 000129d1 00000014 [ 11.660569] dfc0: 00000000 00000000 00000003 00000080 0000c610 00000000 b6fc1d20 00000000 [ 11.668725] dfe0: bef0ad14 bef0acf8 00011e14 b6f74c94 [ 11.676886] Code: e1c321d4 e0433002 e0232397 e5843014 (e5953000) [ 11.681958] ---[ end trace 8f35917de2e76854 ]--- Fixes: 521fc37be3d8 ("ath10k: Avoid override CE5 configuration for QCA99X0 chipsets") Reported-by: Stefan Lippers-Hollmann [ipq40xx/ map-ac2200] Signed-off-by: Hauke Mehrtens Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200714205802.17688-1-hauke@hauke-m.de --- drivers/net/wireless/ath/ath10k/ahb.c | 2 +- drivers/net/wireless/ath/ath10k/pci.c | 78 +++++++++++++++++------------------ 2 files changed, 38 insertions(+), 42 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c index 342a7e58018a..05a61975c83f 100644 --- a/drivers/net/wireless/ath/ath10k/ahb.c +++ b/drivers/net/wireless/ath/ath10k/ahb.c @@ -820,7 +820,7 @@ err_free_irq: ath10k_ahb_release_irq_legacy(ar); err_free_pipes: - ath10k_pci_free_pipes(ar); + ath10k_pci_release_resource(ar); err_resource_deinit: ath10k_ahb_resource_deinit(ar); diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 1d941d53fdc9..cfde7791291a 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -3473,6 +3473,28 @@ int ath10k_pci_setup_resource(struct ath10k *ar) timer_setup(&ar_pci->rx_post_retry, ath10k_pci_rx_replenish_retry, 0); + ar_pci->attr = kmemdup(pci_host_ce_config_wlan, + sizeof(pci_host_ce_config_wlan), + GFP_KERNEL); + if (!ar_pci->attr) + return -ENOMEM; + + ar_pci->pipe_config = kmemdup(pci_target_ce_config_wlan, + sizeof(pci_target_ce_config_wlan), + GFP_KERNEL); + if (!ar_pci->pipe_config) { + ret = -ENOMEM; + goto err_free_attr; + } + + ar_pci->serv_to_pipe = kmemdup(pci_target_service_to_ce_map_wlan, + sizeof(pci_target_service_to_ce_map_wlan), + GFP_KERNEL); + if (!ar_pci->serv_to_pipe) { + ret = -ENOMEM; + goto err_free_pipe_config; + } + if (QCA_REV_6174(ar) || QCA_REV_9377(ar)) ath10k_pci_override_ce_config(ar); @@ -3480,18 +3502,31 @@ int ath10k_pci_setup_resource(struct ath10k *ar) if (ret) { ath10k_err(ar, "failed to allocate copy engine pipes: %d\n", ret); - return ret; + goto err_free_serv_to_pipe; } return 0; + +err_free_serv_to_pipe: + kfree(ar_pci->serv_to_pipe); +err_free_pipe_config: + kfree(ar_pci->pipe_config); +err_free_attr: + kfree(ar_pci->attr); + return ret; } void ath10k_pci_release_resource(struct ath10k *ar) { + struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); + ath10k_pci_rx_retry_sync(ar); netif_napi_del(&ar->napi); ath10k_pci_ce_deinit(ar); ath10k_pci_free_pipes(ar); + kfree(ar_pci->attr); + kfree(ar_pci->pipe_config); + kfree(ar_pci->serv_to_pipe); } static const struct ath10k_bus_ops ath10k_pci_bus_ops = { @@ -3601,30 +3636,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev, timer_setup(&ar_pci->ps_timer, ath10k_pci_ps_timer, 0); - ar_pci->attr = kmemdup(pci_host_ce_config_wlan, - sizeof(pci_host_ce_config_wlan), - GFP_KERNEL); - if (!ar_pci->attr) { - ret = -ENOMEM; - goto err_free; - } - - ar_pci->pipe_config = kmemdup(pci_target_ce_config_wlan, - sizeof(pci_target_ce_config_wlan), - GFP_KERNEL); - if (!ar_pci->pipe_config) { - ret = -ENOMEM; - goto err_free; - } - - ar_pci->serv_to_pipe = kmemdup(pci_target_service_to_ce_map_wlan, - sizeof(pci_target_service_to_ce_map_wlan), - GFP_KERNEL); - if (!ar_pci->serv_to_pipe) { - ret = -ENOMEM; - goto err_free; - } - ret = ath10k_pci_setup_resource(ar); if (ret) { ath10k_err(ar, "failed to setup resource: %d\n", ret); @@ -3705,10 +3716,9 @@ err_unsupported: err_free_irq: ath10k_pci_free_irq(ar); - ath10k_pci_rx_retry_sync(ar); err_deinit_irq: - ath10k_pci_deinit_irq(ar); + ath10k_pci_release_resource(ar); err_sleep: ath10k_pci_sleep_sync(ar); @@ -3720,29 +3730,18 @@ err_free_pipes: err_core_destroy: ath10k_core_destroy(ar); -err_free: - kfree(ar_pci->attr); - kfree(ar_pci->pipe_config); - kfree(ar_pci->serv_to_pipe); - return ret; } static void ath10k_pci_remove(struct pci_dev *pdev) { struct ath10k *ar = pci_get_drvdata(pdev); - struct ath10k_pci *ar_pci; ath10k_dbg(ar, ATH10K_DBG_PCI, "pci remove\n"); if (!ar) return; - ar_pci = ath10k_pci_priv(ar); - - if (!ar_pci) - return; - ath10k_core_unregister(ar); ath10k_pci_free_irq(ar); ath10k_pci_deinit_irq(ar); @@ -3750,9 +3749,6 @@ static void ath10k_pci_remove(struct pci_dev *pdev) ath10k_pci_sleep_sync(ar); ath10k_pci_release(ar); ath10k_core_destroy(ar); - kfree(ar_pci->attr); - kfree(ar_pci->pipe_config); - kfree(ar_pci->serv_to_pipe); } MODULE_DEVICE_TABLE(pci, ath10k_pci_id_table); -- cgit v1.2.3 From 24a63fe6d45d6527db5ab87bcd1da6921f10e89e Mon Sep 17 00:00:00 2001 From: Zhang Changzhong Date: Mon, 20 Jul 2020 15:18:43 +0800 Subject: net: bcmgenet: fix error returns in bcmgenet_probe() The driver forgets to call clk_disable_unprepare() in error path after a success calling for clk_prepare_enable(). Fix to goto err_clk_disable if clk_prepare_enable() is successful. Fixes: 99d55638d4b0 ("net: bcmgenet: enable NETIF_F_HIGHDMA flag") Signed-off-by: Zhang Changzhong Acked-by: Doug Berger Acked-by: Florian fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 368e05b16ae9..903811e843d2 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -3988,7 +3988,7 @@ static int bcmgenet_probe(struct platform_device *pdev) if (err) err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) - goto err; + goto err_clk_disable; /* Mii wait queue */ init_waitqueue_head(&priv->wq); -- cgit v1.2.3 From 53a92889ec0e6d968a7f4098a16031a672b6fd51 Mon Sep 17 00:00:00 2001 From: Zhang Changzhong Date: Mon, 20 Jul 2020 17:36:34 +0800 Subject: net: bcmgenet: add missed clk_disable_unprepare in bcmgenet_probe The driver forgets to call clk_disable_unprepare() in error path after a success calling for clk_prepare_enable(). Fix to goto err_clk_disable if clk_prepare_enable() is successful. Fixes: c80d36ff63a5 ("net: bcmgenet: Use devm_clk_get_optional() to get the clocks") Signed-off-by: Zhang Changzhong Acked-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 903811e843d2..e471b14fc6e9 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -4000,14 +4000,14 @@ static int bcmgenet_probe(struct platform_device *pdev) if (IS_ERR(priv->clk_wol)) { dev_dbg(&priv->pdev->dev, "failed to get enet-wol clock\n"); err = PTR_ERR(priv->clk_wol); - goto err; + goto err_clk_disable; } priv->clk_eee = devm_clk_get_optional(&priv->pdev->dev, "enet-eee"); if (IS_ERR(priv->clk_eee)) { dev_dbg(&priv->pdev->dev, "failed to get enet-eee clock\n"); err = PTR_ERR(priv->clk_eee); - goto err; + goto err_clk_disable; } /* If this is an internal GPHY, power it on now, before UniMAC is -- cgit v1.2.3 From 639f181f0ee20d3249dbc55f740f0167267180f0 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 20 Jul 2020 12:41:46 +0100 Subject: rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATA rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read. Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read as this particular error doesn't get stored in ->sk_err by the networking core. Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive errors (there's no way for it to report which call, if any, the error was caused by). Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells Signed-off-by: David S. Miller --- net/rxrpc/recvmsg.c | 2 +- net/rxrpc/sendmsg.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/rxrpc/recvmsg.c b/net/rxrpc/recvmsg.c index 2989742a4aa1..490b1927215c 100644 --- a/net/rxrpc/recvmsg.c +++ b/net/rxrpc/recvmsg.c @@ -543,7 +543,7 @@ try_again: list_empty(&rx->recvmsg_q) && rx->sk.sk_state != RXRPC_SERVER_LISTENING) { release_sock(&rx->sk); - return -ENODATA; + return -EAGAIN; } if (list_empty(&rx->recvmsg_q)) { diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c index 1304b8608f56..03a30d014bb6 100644 --- a/net/rxrpc/sendmsg.c +++ b/net/rxrpc/sendmsg.c @@ -304,7 +304,7 @@ static int rxrpc_send_data(struct rxrpc_sock *rx, /* this should be in poll */ sk_clear_bit(SOCKWQ_ASYNC_NOSPACE, sk); - if (sk->sk_err || (sk->sk_shutdown & SEND_SHUTDOWN)) + if (sk->sk_shutdown & SEND_SHUTDOWN) return -EPIPE; more = msg->msg_flags & MSG_MORE; -- cgit v1.2.3 From 2bced6aefa3d0347e11efc610759e1317bfca7a7 Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Mon, 20 Jul 2020 16:24:28 +0200 Subject: net/smc: put slot when connection is killed To get a send slot smc_wr_tx_get_free_slot() is called, which might wait for a free slot. When smc_wr_tx_get_free_slot() returns there is a check if the connection was killed in the meantime. In that case don't only return an error, but also put back the free slot. Fixes: b290098092e4 ("net/smc: cancel send and receive for terminated socket") Reviewed-by: Ursula Braun Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_cdc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/smc/smc_cdc.c b/net/smc/smc_cdc.c index a47e8855e045..ce468ff62a19 100644 --- a/net/smc/smc_cdc.c +++ b/net/smc/smc_cdc.c @@ -66,9 +66,13 @@ int smc_cdc_get_free_slot(struct smc_connection *conn, rc = smc_wr_tx_get_free_slot(link, smc_cdc_tx_handler, wr_buf, wr_rdma_buf, (struct smc_wr_tx_pend_priv **)pend); - if (conn->killed) + if (conn->killed) { /* abnormal termination */ + if (!rc) + smc_wr_tx_put_slot(link, + (struct smc_wr_tx_pend_priv *)pend); rc = -EPIPE; + } return rc; } -- cgit v1.2.3 From a9e445029570ab691a44389d68b9c544338586b5 Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Mon, 20 Jul 2020 16:24:29 +0200 Subject: net/smc: fix dmb buffer shortage There is a current limit of 1920 registered dmb buffers per ISM device for smc-d. One link group can contain 255 connections, each connection is using one dmb buffer. When the connection is closed then the registered buffer is held in a queue and is reused by the next connection. When a link group is 'full' then another link group is created and uses an own buffer pool. The link groups are added to a list using list_add() which puts a new link group to the first position in the list. In the situation that many connections are opened (>1920) and a few of them stay open while others are closed quickly we end up with at least 8 link groups. For a new connection a matching link group is looked up, iterating over the list of link groups. The trailing 7 link groups all have registered dmb buffers which could be reused, while the first link group has only a few dmb buffers and then hit the 1920 limit. Because the first link group is not full (255 connection limit not reached) it is chosen and finally the connection falls back to TCP because there is no dmb buffer available in this link group. There are multiple ways to fix that: using list_add_tail() allows to scan older link groups first for free buffers which ensures that buffers are reused first. This fixes the problem for smc-r link groups as well. For smc-d there is an even better way to address this problem because smc-d does not have the 255 connections per link group limit. So fix the problem for smc-d by allowing large link groups. Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM") Reviewed-by: Ursula Braun Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index ca3dc6af73af..f82a2e599917 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -444,7 +444,7 @@ static int smc_lgr_create(struct smc_sock *smc, struct smc_init_info *ini) } smc->conn.lgr = lgr; spin_lock_bh(lgr_lock); - list_add(&lgr->list, lgr_list); + list_add_tail(&lgr->list, lgr_list); spin_unlock_bh(lgr_lock); return 0; @@ -1311,7 +1311,7 @@ int smc_conn_create(struct smc_sock *smc, struct smc_init_info *ini) smcr_lgr_match(lgr, ini->ib_lcl, role, ini->ib_clcqpn)) && !lgr->sync_err && lgr->vlan_id == ini->vlan_id && - (role == SMC_CLNT || + (role == SMC_CLNT || ini->is_smcd || lgr->conns_num < SMC_RMBS_PER_LGR_MAX)) { /* link group found */ ini->cln_first_contact = SMC_REUSE_CONTACT; -- cgit v1.2.3 From 6790711f8ac5faabc43237c0d05d93db431a1ecc Mon Sep 17 00:00:00 2001 From: Liu Jian Date: Mon, 20 Jul 2020 22:28:29 +0800 Subject: dpaa_eth: Fix one possible memleak in dpaa_eth_probe When dma_coerce_mask_and_coherent() fails, the alloced netdev need to be freed. Fixes: 060ad66f9795 ("dpaa_eth: change DMA device") Signed-off-by: Liu Jian Acked-by: Madalin Bucur Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c index 2972244e6eb0..43570f4911ea 100644 --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -2938,7 +2938,7 @@ static int dpaa_eth_probe(struct platform_device *pdev) DMA_BIT_MASK(40)); if (err) { netdev_err(net_dev, "dma_coerce_mask_and_coherent() failed\n"); - return err; + goto free_netdev; } /* If fsl_fm_max_frm is set to a higher value than the all-common 1500, -- cgit v1.2.3 From 5dbaeb87f2b309936be0aeae00cbc9e7f20ab296 Mon Sep 17 00:00:00 2001 From: Liu Jian Date: Mon, 20 Jul 2020 22:31:49 +0800 Subject: mlxsw: destroy workqueue when trap_register in mlxsw_emad_init When mlxsw_core_trap_register fails in mlxsw_emad_init, destroy_workqueue() shouled be called to destroy mlxsw_core->emad_wq. Fixes: d965465b60ba ("mlxsw: core: Fix possible deadlock") Signed-off-by: Liu Jian Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c index e9ccd333f61d..d6d6fe64887b 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core.c @@ -710,7 +710,7 @@ static int mlxsw_emad_init(struct mlxsw_core *mlxsw_core) err = mlxsw_core_trap_register(mlxsw_core, &mlxsw_emad_rx_listener, mlxsw_core); if (err) - return err; + goto err_trap_register; err = mlxsw_core->driver->basic_trap_groups_set(mlxsw_core); if (err) @@ -722,6 +722,7 @@ static int mlxsw_emad_init(struct mlxsw_core *mlxsw_core) err_emad_trap_set: mlxsw_core_trap_unregister(mlxsw_core, &mlxsw_emad_rx_listener, mlxsw_core); +err_trap_register: destroy_workqueue(mlxsw_core->emad_wq); return err; } -- cgit v1.2.3 From 34b85adad831547cdd349ce9a05bbe751f9f4d46 Mon Sep 17 00:00:00 2001 From: Guillaume Nault Date: Mon, 20 Jul 2020 17:46:58 +0200 Subject: Documentation: bareudp: update iproute2 sample commands bareudp.rst was written before iproute2 gained support for this new type of tunnel. Therefore, the sample command lines didn't match the final iproute2 implementation. Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller --- Documentation/networking/bareudp.rst | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/Documentation/networking/bareudp.rst b/Documentation/networking/bareudp.rst index 465a8b251bfe..ff406563ea88 100644 --- a/Documentation/networking/bareudp.rst +++ b/Documentation/networking/bareudp.rst @@ -26,7 +26,7 @@ Usage 1) Device creation & deletion - a) ip link add dev bareudp0 type bareudp dstport 6635 ethertype 0x8847. + a) ip link add dev bareudp0 type bareudp dstport 6635 ethertype mpls_uc This creates a bareudp tunnel device which tunnels L3 traffic with ethertype 0x8847 (MPLS traffic). The destination port of the UDP header will be set to @@ -34,14 +34,21 @@ Usage b) ip link delete bareudp0 -2) Device creation with multiple proto mode enabled +2) Device creation with multiproto mode enabled -There are two ways to create a bareudp device for MPLS & IP with multiproto mode -enabled. +The multiproto mode allows bareudp tunnels to handle several protocols of the +same family. It is currently only available for IP and MPLS. This mode has to +be enabled explicitly with the "multiproto" flag. - a) ip link add dev bareudp0 type bareudp dstport 6635 ethertype 0x8847 multiproto + a) ip link add dev bareudp0 type bareudp dstport 6635 ethertype ipv4 multiproto - b) ip link add dev bareudp0 type bareudp dstport 6635 ethertype mpls + For an IPv4 tunnel the multiproto mode allows the tunnel to also handle + IPv6. + + b) ip link add dev bareudp0 type bareudp dstport 6635 ethertype mpls_uc multiproto + + For MPLS, the multiproto mode allows the tunnel to handle both unicast + and multicast MPLS packets. 3) Device Usage -- cgit v1.2.3 From 5d93518e06b2102253d465e523f16bd4cb5ce859 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Mon, 20 Jul 2020 12:43:27 -0400 Subject: net: hsr: check for return value of skb_put_padto() skb_put_padto() can fail. So check for return type and return NULL for skb. Caller checks for skb and acts correctly if it is NULL. Fixes: 6d6148bc78d2 ("net: hsr: fix incorrect lsdu size in the tag of HSR frames for small frames") Signed-off-by: Murali Karicheri Signed-off-by: David S. Miller --- net/hsr/hsr_forward.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/net/hsr/hsr_forward.c b/net/hsr/hsr_forward.c index e42fd356f073..1ea17752fffc 100644 --- a/net/hsr/hsr_forward.c +++ b/net/hsr/hsr_forward.c @@ -120,15 +120,17 @@ static struct sk_buff *frame_get_stripped_skb(struct hsr_frame_info *frame, return skb_clone(frame->skb_std, GFP_ATOMIC); } -static void hsr_fill_tag(struct sk_buff *skb, struct hsr_frame_info *frame, - struct hsr_port *port, u8 proto_version) +static struct sk_buff *hsr_fill_tag(struct sk_buff *skb, + struct hsr_frame_info *frame, + struct hsr_port *port, u8 proto_version) { struct hsr_ethhdr *hsr_ethhdr; int lane_id; int lsdu_size; /* pad to minimum packet size which is 60 + 6 (HSR tag) */ - skb_put_padto(skb, ETH_ZLEN + HSR_HLEN); + if (skb_put_padto(skb, ETH_ZLEN + HSR_HLEN)) + return NULL; if (port->type == HSR_PT_SLAVE_A) lane_id = 0; @@ -147,6 +149,8 @@ static void hsr_fill_tag(struct sk_buff *skb, struct hsr_frame_info *frame, hsr_ethhdr->hsr_tag.encap_proto = hsr_ethhdr->ethhdr.h_proto; hsr_ethhdr->ethhdr.h_proto = htons(proto_version ? ETH_P_HSR : ETH_P_PRP); + + return skb; } static struct sk_buff *create_tagged_skb(struct sk_buff *skb_o, @@ -175,9 +179,10 @@ static struct sk_buff *create_tagged_skb(struct sk_buff *skb_o, memmove(dst, src, movelen); skb_reset_mac_header(skb); - hsr_fill_tag(skb, frame, port, port->hsr->prot_version); - - return skb; + /* skb_put_padto free skb on error and hsr_fill_tag returns NULL in + * that case + */ + return hsr_fill_tag(skb, frame, port, port->hsr->prot_version); } /* If the original frame was an HSR tagged frame, just clone it to be sent -- cgit v1.2.3 From f85ae16f924f92a370b81b4e77862c1c59882fce Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 20 Jul 2020 16:00:13 -0700 Subject: ionic: use offset for ethtool regs data Use an offset to write the second half of the regs data into the second half of the buffer instead of overwriting the first half. Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_ethtool.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c index e03ea9b18f95..095561924bdc 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c @@ -103,15 +103,18 @@ static void ionic_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *p) { struct ionic_lif *lif = netdev_priv(netdev); + unsigned int offset; unsigned int size; regs->version = IONIC_DEV_CMD_REG_VERSION; + offset = 0; size = IONIC_DEV_INFO_REG_COUNT * sizeof(u32); - memcpy_fromio(p, lif->ionic->idev.dev_info_regs->words, size); + memcpy_fromio(p + offset, lif->ionic->idev.dev_info_regs->words, size); + offset += size; size = IONIC_DEV_CMD_REG_COUNT * sizeof(u32); - memcpy_fromio(p, lif->ionic->idev.dev_cmd_regs->words, size); + memcpy_fromio(p + offset, lif->ionic->idev.dev_cmd_regs->words, size); } static int ionic_get_link_ksettings(struct net_device *netdev, -- cgit v1.2.3 From cbec2153a9a68d011454960ba84887e46e40b37d Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 20 Jul 2020 16:00:14 -0700 Subject: ionic: fix up filter locks and debug msgs Add in a couple of forgotten spinlocks and fix up some of the debug messages around filter management. Fixes: c1e329ebec8d ("ionic: Add management of rx filters") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 17 +++++++---------- drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c | 5 +++++ 2 files changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index f49486b6d04d..41e86d6b76b6 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -863,8 +863,7 @@ static int ionic_lif_addr_add(struct ionic_lif *lif, const u8 *addr) if (f) return 0; - netdev_dbg(lif->netdev, "rx_filter add ADDR %pM (id %d)\n", addr, - ctx.comp.rx_filter_add.filter_id); + netdev_dbg(lif->netdev, "rx_filter add ADDR %pM\n", addr); memcpy(ctx.cmd.rx_filter_add.mac.addr, addr, ETH_ALEN); err = ionic_adminq_post_wait(lif, &ctx); @@ -893,6 +892,9 @@ static int ionic_lif_addr_del(struct ionic_lif *lif, const u8 *addr) return -ENOENT; } + netdev_dbg(lif->netdev, "rx_filter del ADDR %pM (id %d)\n", + addr, f->filter_id); + ctx.cmd.rx_filter_del.filter_id = cpu_to_le32(f->filter_id); ionic_rx_filter_free(lif, f); spin_unlock_bh(&lif->rx_filters.lock); @@ -901,9 +903,6 @@ static int ionic_lif_addr_del(struct ionic_lif *lif, const u8 *addr) if (err && err != -EEXIST) return err; - netdev_dbg(lif->netdev, "rx_filter del ADDR %pM (id %d)\n", addr, - ctx.cmd.rx_filter_del.filter_id); - return 0; } @@ -1351,13 +1350,11 @@ static int ionic_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, }; int err; + netdev_dbg(netdev, "rx_filter add VLAN %d\n", vid); err = ionic_adminq_post_wait(lif, &ctx); if (err) return err; - netdev_dbg(netdev, "rx_filter add VLAN %d (id %d)\n", vid, - ctx.comp.rx_filter_add.filter_id); - return ionic_rx_filter_save(lif, 0, IONIC_RXQ_INDEX_ANY, 0, &ctx); } @@ -1382,8 +1379,8 @@ static int ionic_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, return -ENOENT; } - netdev_dbg(netdev, "rx_filter del VLAN %d (id %d)\n", vid, - le32_to_cpu(ctx.cmd.rx_filter_del.filter_id)); + netdev_dbg(netdev, "rx_filter del VLAN %d (id %d)\n", + vid, f->filter_id); ctx.cmd.rx_filter_del.filter_id = cpu_to_le32(f->filter_id); ionic_rx_filter_free(lif, f); diff --git a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c index 80eeb7696e01..fb9d828812bd 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c @@ -69,10 +69,12 @@ int ionic_rx_filters_init(struct ionic_lif *lif) spin_lock_init(&lif->rx_filters.lock); + spin_lock_bh(&lif->rx_filters.lock); for (i = 0; i < IONIC_RX_FILTER_HLISTS; i++) { INIT_HLIST_HEAD(&lif->rx_filters.by_hash[i]); INIT_HLIST_HEAD(&lif->rx_filters.by_id[i]); } + spin_unlock_bh(&lif->rx_filters.lock); return 0; } @@ -84,11 +86,13 @@ void ionic_rx_filters_deinit(struct ionic_lif *lif) struct hlist_node *tmp; unsigned int i; + spin_lock_bh(&lif->rx_filters.lock); for (i = 0; i < IONIC_RX_FILTER_HLISTS; i++) { head = &lif->rx_filters.by_id[i]; hlist_for_each_entry_safe(f, tmp, head, by_id) ionic_rx_filter_free(lif, f); } + spin_unlock_bh(&lif->rx_filters.lock); } int ionic_rx_filter_save(struct ionic_lif *lif, u32 flow_id, u16 rxq_index, @@ -124,6 +128,7 @@ int ionic_rx_filter_save(struct ionic_lif *lif, u32 flow_id, u16 rxq_index, f->filter_id = le32_to_cpu(ctx->comp.rx_filter_add.filter_id); f->rxq_index = rxq_index; memcpy(&f->cmd, ac, sizeof(f->cmd)); + netdev_dbg(lif->netdev, "rx_filter add filter_id %d\n", f->filter_id); INIT_HLIST_NODE(&f->by_hash); INIT_HLIST_NODE(&f->by_id); -- cgit v1.2.3 From cc4428c4de8c31f12e4690d0409e0432fe05702f Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 20 Jul 2020 16:00:15 -0700 Subject: ionic: update filter id after replay When we replay the rx filters after a fw-upgrade we get new filter_id values from the FW, which we need to save and update in our local filter list. This allows us to delete the filters with the correct filter_id when we're done. Fixes: 7e4d47596b68 ("ionic: replay filters after fw upgrade") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller --- .../net/ethernet/pensando/ionic/ionic_rx_filter.c | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c index fb9d828812bd..cd0076fc3044 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c @@ -21,13 +21,16 @@ void ionic_rx_filter_free(struct ionic_lif *lif, struct ionic_rx_filter *f) void ionic_rx_filter_replay(struct ionic_lif *lif) { struct ionic_rx_filter_add_cmd *ac; + struct hlist_head new_id_list; struct ionic_admin_ctx ctx; struct ionic_rx_filter *f; struct hlist_head *head; struct hlist_node *tmp; + unsigned int key; unsigned int i; int err; + INIT_HLIST_HEAD(&new_id_list); ac = &ctx.cmd.rx_filter_add; for (i = 0; i < IONIC_RX_FILTER_HLISTS; i++) { @@ -58,9 +61,30 @@ void ionic_rx_filter_replay(struct ionic_lif *lif) ac->mac.addr); break; } + spin_lock_bh(&lif->rx_filters.lock); + ionic_rx_filter_free(lif, f); + spin_unlock_bh(&lif->rx_filters.lock); + + continue; } + + /* remove from old id list, save new id in tmp list */ + spin_lock_bh(&lif->rx_filters.lock); + hlist_del(&f->by_id); + spin_unlock_bh(&lif->rx_filters.lock); + f->filter_id = le32_to_cpu(ctx.comp.rx_filter_add.filter_id); + hlist_add_head(&f->by_id, &new_id_list); } } + + /* rebuild the by_id hash lists with the new filter ids */ + spin_lock_bh(&lif->rx_filters.lock); + hlist_for_each_entry_safe(f, tmp, &new_id_list, by_id) { + key = f->filter_id & IONIC_RX_FILTER_HLISTS_MASK; + head = &lif->rx_filters.by_id[key]; + hlist_add_head(&f->by_id, head); + } + spin_unlock_bh(&lif->rx_filters.lock); } int ionic_rx_filters_init(struct ionic_lif *lif) -- cgit v1.2.3 From bdff46665ee655600d0fe2a0e5f62ec7853d3b22 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 20 Jul 2020 16:00:16 -0700 Subject: ionic: keep rss hash after fw update Make sure the RSS hash key is kept across a fw update by not de-initing it when an update is happening. Fixes: c672412f6172 ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index 41e86d6b76b6..ddb9ad5b294c 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -2277,11 +2277,10 @@ static void ionic_lif_deinit(struct ionic_lif *lif) cancel_work_sync(&lif->deferred.work); cancel_work_sync(&lif->tx_timeout_work); ionic_rx_filters_deinit(lif); + if (lif->netdev->features & NETIF_F_RXHASH) + ionic_lif_rss_deinit(lif); } - if (lif->netdev->features & NETIF_F_RXHASH) - ionic_lif_rss_deinit(lif); - napi_disable(&lif->adminqcq->napi); ionic_lif_qcq_deinit(lif, lif->notifyqcq); ionic_lif_qcq_deinit(lif, lif->adminqcq); -- cgit v1.2.3 From 0925e9db4dc86daf666d9a3d53c7db14ac6d5d00 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 20 Jul 2020 16:00:17 -0700 Subject: ionic: use mutex to protect queue operations The ionic_wait_on_bit_lock() was a open-coded mutex knock-off used only for protecting the queue reset operations, and there was no reason not to use the real thing. We can use the lock more correctly and to better protect the queue stop and start operations from cross threading. We can also remove a useless and expensive bit operation from the Rx path. This fixes a case found where the link_status_check from a link flap could run into an MTU change and cause a crash. Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 28 ++++++++++++++---------- drivers/net/ethernet/pensando/ionic/ionic_lif.h | 8 +------ drivers/net/ethernet/pensando/ionic/ionic_txrx.c | 6 ----- 3 files changed, 17 insertions(+), 25 deletions(-) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index ddb9ad5b294c..5fd31ba56937 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -96,8 +96,7 @@ static void ionic_link_status_check(struct ionic_lif *lif) u16 link_status; bool link_up; - if (!test_bit(IONIC_LIF_F_LINK_CHECK_REQUESTED, lif->state) || - test_bit(IONIC_LIF_F_QUEUE_RESET, lif->state)) + if (!test_bit(IONIC_LIF_F_LINK_CHECK_REQUESTED, lif->state)) return; link_status = le16_to_cpu(lif->info->status.link_status); @@ -114,16 +113,22 @@ static void ionic_link_status_check(struct ionic_lif *lif) netif_carrier_on(netdev); } - if (lif->netdev->flags & IFF_UP && netif_running(lif->netdev)) + if (lif->netdev->flags & IFF_UP && netif_running(lif->netdev)) { + mutex_lock(&lif->queue_lock); ionic_start_queues(lif); + mutex_unlock(&lif->queue_lock); + } } else { if (netif_carrier_ok(netdev)) { netdev_info(netdev, "Link down\n"); netif_carrier_off(netdev); } - if (lif->netdev->flags & IFF_UP && netif_running(lif->netdev)) + if (lif->netdev->flags & IFF_UP && netif_running(lif->netdev)) { + mutex_lock(&lif->queue_lock); ionic_stop_queues(lif); + mutex_unlock(&lif->queue_lock); + } } clear_bit(IONIC_LIF_F_LINK_CHECK_REQUESTED, lif->state); @@ -1990,16 +1995,13 @@ int ionic_reset_queues(struct ionic_lif *lif, ionic_reset_cb cb, void *arg) bool running; int err = 0; - err = ionic_wait_for_bit(lif, IONIC_LIF_F_QUEUE_RESET); - if (err) - return err; - + mutex_lock(&lif->queue_lock); running = netif_running(lif->netdev); if (running) { netif_device_detach(lif->netdev); err = ionic_stop(lif->netdev); if (err) - goto reset_out; + return err; } if (cb) @@ -2009,9 +2011,7 @@ int ionic_reset_queues(struct ionic_lif *lif, ionic_reset_cb cb, void *arg) err = ionic_open(lif->netdev); netif_device_attach(lif->netdev); } - -reset_out: - clear_bit(IONIC_LIF_F_QUEUE_RESET, lif->state); + mutex_unlock(&lif->queue_lock); return err; } @@ -2158,7 +2158,9 @@ static void ionic_lif_handle_fw_down(struct ionic_lif *lif) if (test_bit(IONIC_LIF_F_UP, lif->state)) { dev_info(ionic->dev, "Surprise FW stop, stopping queues\n"); + mutex_lock(&lif->queue_lock); ionic_stop_queues(lif); + mutex_unlock(&lif->queue_lock); } if (netif_running(lif->netdev)) { @@ -2285,6 +2287,7 @@ static void ionic_lif_deinit(struct ionic_lif *lif) ionic_lif_qcq_deinit(lif, lif->notifyqcq); ionic_lif_qcq_deinit(lif, lif->adminqcq); + mutex_destroy(&lif->queue_lock); ionic_lif_reset(lif); } @@ -2461,6 +2464,7 @@ static int ionic_lif_init(struct ionic_lif *lif) return err; lif->hw_index = le16_to_cpu(comp.hw_index); + mutex_init(&lif->queue_lock); /* now that we have the hw_index we can figure out our doorbell page */ lif->dbid_count = le32_to_cpu(lif->ionic->ident.dev.ndbpgs_per_lif); diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.h b/drivers/net/ethernet/pensando/ionic/ionic_lif.h index ed126dd74e01..8dc2c5d77424 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.h +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.h @@ -135,7 +135,6 @@ enum ionic_lif_state_flags { IONIC_LIF_F_SW_DEBUG_STATS, IONIC_LIF_F_UP, IONIC_LIF_F_LINK_CHECK_REQUESTED, - IONIC_LIF_F_QUEUE_RESET, IONIC_LIF_F_FW_RESET, /* leave this as last */ @@ -165,6 +164,7 @@ struct ionic_lif { unsigned int hw_index; unsigned int kern_pid; u64 __iomem *kern_dbpage; + struct mutex queue_lock; /* lock for queue structures */ spinlock_t adminq_lock; /* lock for AdminQ operations */ struct ionic_qcq *adminqcq; struct ionic_qcq *notifyqcq; @@ -213,12 +213,6 @@ struct ionic_lif { #define lif_to_txq(lif, i) (&lif_to_txqcq((lif), i)->q) #define lif_to_rxq(lif, i) (&lif_to_txqcq((lif), i)->q) -/* return 0 if successfully set the bit, else non-zero */ -static inline int ionic_wait_for_bit(struct ionic_lif *lif, int bitname) -{ - return wait_on_bit_lock(lif->state, bitname, TASK_INTERRUPTIBLE); -} - static inline u32 ionic_coal_usec_to_hw(struct ionic *ionic, u32 usecs) { u32 mult = le32_to_cpu(ionic->ident.dev.intr_coal_mult); diff --git a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c index b7f900c11834..85eb8f276a37 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c @@ -161,12 +161,6 @@ static void ionic_rx_clean(struct ionic_queue *q, return; } - /* no packet processing while resetting */ - if (unlikely(test_bit(IONIC_LIF_F_QUEUE_RESET, q->lif->state))) { - stats->dropped++; - return; - } - stats->pkts++; stats->bytes += le16_to_cpu(comp->len); -- cgit v1.2.3 From c271042eb6a031d1333cf57422ec1d20726901ab Mon Sep 17 00:00:00 2001 From: Vinay Kumar Yadav Date: Sat, 18 Jul 2020 00:31:42 +0530 Subject: crypto/chtls: fix tls alert messages corrupted by tls data When tls data skb is pending for Tx and tls alert comes , It is wrongly overwrite the record type of tls data to tls alert record type. fix the issue correcting it. v1->v2: - Correct submission tree. - Add fixes tag. Fixes: 6919a8264a32 ("Crypto/chtls: add/delete TLS header in driver") Signed-off-by: Vinay Kumar Yadav Signed-off-by: David S. Miller --- drivers/crypto/chelsio/chtls/chtls_io.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/crypto/chelsio/chtls/chtls_io.c b/drivers/crypto/chelsio/chtls/chtls_io.c index e1401d9cc756..2e9acae1cba3 100644 --- a/drivers/crypto/chelsio/chtls/chtls_io.c +++ b/drivers/crypto/chelsio/chtls/chtls_io.c @@ -1052,14 +1052,15 @@ int chtls_sendmsg(struct sock *sk, struct msghdr *msg, size_t size) &record_type); if (err) goto out_err; + + /* Avoid appending tls handshake, alert to tls data */ + if (skb) + tx_skb_finalize(skb); } recordsz = size; csk->tlshws.txleft = recordsz; csk->tlshws.type = record_type; - - if (skb) - ULP_SKB_CB(skb)->ulp.tls.type = record_type; } if (!skb || (ULP_SKB_CB(skb)->flags & ULPCB_FLAG_NO_APPEND) || -- cgit v1.2.3 From 30d9e5057ac01dd6982adace221bfcafb1f8186e Mon Sep 17 00:00:00 2001 From: Vinay Kumar Yadav Date: Sat, 18 Jul 2020 00:41:07 +0530 Subject: crypto/chtls: correct net_device reference count ip_dev_find() call holds net_device reference which is not needed, use __ip_dev_find() which does not hold reference. v1->v2: - Correct submission tree. - Add fixes tag. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav Signed-off-by: David S. Miller --- drivers/crypto/chelsio/chtls/chtls_cm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/chelsio/chtls/chtls_cm.c b/drivers/crypto/chelsio/chtls/chtls_cm.c index f200fae6f7cb..54093115eb95 100644 --- a/drivers/crypto/chelsio/chtls/chtls_cm.c +++ b/drivers/crypto/chelsio/chtls/chtls_cm.c @@ -102,7 +102,7 @@ static struct net_device *chtls_find_netdev(struct chtls_dev *cdev, case PF_INET: if (likely(!inet_sk(sk)->inet_rcv_saddr)) return ndev; - ndev = ip_dev_find(&init_net, inet_sk(sk)->inet_rcv_saddr); + ndev = __ip_dev_find(&init_net, inet_sk(sk)->inet_rcv_saddr, false); break; #if IS_ENABLED(CONFIG_IPV6) case PF_INET6: -- cgit v1.2.3 From 1e8fd3a97f2d83a7197876ceb4f37b4c2b00a0f3 Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Sat, 18 Jul 2020 00:31:49 -0500 Subject: nfc: s3fwrn5: add missing release on skb in s3fwrn5_recv_frame The implementation of s3fwrn5_recv_frame() is supposed to consume skb on all execution paths. Release skb before returning -ENODEV. Signed-off-by: Navid Emamdoost Signed-off-by: David S. Miller --- drivers/nfc/s3fwrn5/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/nfc/s3fwrn5/core.c b/drivers/nfc/s3fwrn5/core.c index 91d4d5b28a7d..ba6c486d6465 100644 --- a/drivers/nfc/s3fwrn5/core.c +++ b/drivers/nfc/s3fwrn5/core.c @@ -198,6 +198,7 @@ int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb, case S3FWRN5_MODE_FW: return s3fwrn5_fw_recv_frame(ndev, skb); default: + kfree_skb(skb); return -ENODEV; } } -- cgit v1.2.3 From ae372cb1750f6c95370f92fe5f5620e0954663ba Mon Sep 17 00:00:00 2001 From: wenxu Date: Sun, 19 Jul 2020 20:30:37 +0800 Subject: net/sched: act_ct: fix restore the qdisc_skb_cb after defrag The fragment packets do defrag in tcf_ct_handle_fragments will clear the skb->cb which make the qdisc_skb_cb clear too. So the qdsic_skb_cb should be store before defrag and restore after that. It also update the pkt_len after all the fragments finish the defrag to one packet and make the following actions counter correct. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: wenxu Signed-off-by: David S. Miller --- net/sched/act_ct.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c index 67504aece9ae..5928efb6449c 100644 --- a/net/sched/act_ct.c +++ b/net/sched/act_ct.c @@ -673,9 +673,10 @@ static int tcf_ct_ipv6_is_fragment(struct sk_buff *skb, bool *frag) } static int tcf_ct_handle_fragments(struct net *net, struct sk_buff *skb, - u8 family, u16 zone) + u8 family, u16 zone, bool *defrag) { enum ip_conntrack_info ctinfo; + struct qdisc_skb_cb cb; struct nf_conn *ct; int err = 0; bool frag; @@ -693,6 +694,7 @@ static int tcf_ct_handle_fragments(struct net *net, struct sk_buff *skb, return err; skb_get(skb); + cb = *qdisc_skb_cb(skb); if (family == NFPROTO_IPV4) { enum ip_defrag_users user = IP_DEFRAG_CONNTRACK_IN + zone; @@ -703,6 +705,9 @@ static int tcf_ct_handle_fragments(struct net *net, struct sk_buff *skb, local_bh_enable(); if (err && err != -EINPROGRESS) goto out_free; + + if (!err) + *defrag = true; } else { /* NFPROTO_IPV6 */ #if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6) enum ip6_defrag_users user = IP6_DEFRAG_CONNTRACK_IN + zone; @@ -711,12 +716,16 @@ static int tcf_ct_handle_fragments(struct net *net, struct sk_buff *skb, err = nf_ct_frag6_gather(net, skb, user); if (err && err != -EINPROGRESS) goto out_free; + + if (!err) + *defrag = true; #else err = -EOPNOTSUPP; goto out_free; #endif } + *qdisc_skb_cb(skb) = cb; skb_clear_hash(skb); skb->ignore_df = 1; return err; @@ -914,6 +923,7 @@ static int tcf_ct_act(struct sk_buff *skb, const struct tc_action *a, int nh_ofs, err, retval; struct tcf_ct_params *p; bool skip_add = false; + bool defrag = false; struct nf_conn *ct; u8 family; @@ -946,7 +956,7 @@ static int tcf_ct_act(struct sk_buff *skb, const struct tc_action *a, */ nh_ofs = skb_network_offset(skb); skb_pull_rcsum(skb, nh_ofs); - err = tcf_ct_handle_fragments(net, skb, family, p->zone); + err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag); if (err == -EINPROGRESS) { retval = TC_ACT_STOLEN; goto out; @@ -1014,6 +1024,8 @@ out_push: out: tcf_action_update_bstats(&c->common, skb); + if (defrag) + qdisc_skb_cb(skb)->pkt_len = skb->len; return retval; drop: -- cgit v1.2.3 From befc113c56a76ae7be3986034a0e476d3385e265 Mon Sep 17 00:00:00 2001 From: Huang Guobin Date: Sun, 19 Jul 2020 21:46:14 -0400 Subject: net: ag71xx: add missed clk_disable_unprepare in error path of probe The ag71xx_mdio_probe() forgets to call clk_disable_unprepare() when of_reset_control_get_exclusive() failed. Add the missed call to fix it. Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Reported-by: Hulk Robot Signed-off-by: Huang Guobin Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/ag71xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c index 112edbd30823..38cce66ef212 100644 --- a/drivers/net/ethernet/atheros/ag71xx.c +++ b/drivers/net/ethernet/atheros/ag71xx.c @@ -556,7 +556,8 @@ static int ag71xx_mdio_probe(struct ag71xx *ag) ag->mdio_reset = of_reset_control_get_exclusive(np, "mdio"); if (IS_ERR(ag->mdio_reset)) { netif_err(ag, probe, ndev, "Failed to get reset mdio.\n"); - return PTR_ERR(ag->mdio_reset); + err = PTR_ERR(ag->mdio_reset); + goto mdio_err_put_clk; } mii_bus->name = "ag71xx_mdio"; -- cgit v1.2.3 From db44c60c45aa533c92394c778247cfe8bdd66134 Mon Sep 17 00:00:00 2001 From: Bixuan Cui Date: Mon, 20 Jul 2020 09:58:39 +0800 Subject: net: neterion: vxge: reduce stack usage in VXGE_COMPLETE_VPATH_TX Fix the warning: [-Werror=-Wframe-larger-than=] drivers/net/ethernet/neterion/vxge/vxge-main.c: In function'VXGE_COMPLETE_VPATH_TX.isra.37': drivers/net/ethernet/neterion/vxge/vxge-main.c:119:1: warning: the frame size of 1056 bytes is larger than 1024 bytes Dropping the NR_SKB_COMPLETED to 16 is appropriate that won't have much impact on performance and functionality. Signed-off-by: Bixuan Cui Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/neterion/vxge/vxge-main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c index 9b63574b6202..b5f1849fd280 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-main.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c @@ -98,7 +98,7 @@ static inline void VXGE_COMPLETE_VPATH_TX(struct vxge_fifo *fifo) { struct sk_buff **skb_ptr = NULL; struct sk_buff **temp; -#define NR_SKB_COMPLETED 128 +#define NR_SKB_COMPLETED 16 struct sk_buff *completed[NR_SKB_COMPLETED]; int more; -- cgit v1.2.3 From 43946b70494beefe40ec1b2ba4744c0f294d7736 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Fri, 3 Jul 2020 11:16:32 +0900 Subject: exfat: fix overflow issue in exfat_cluster_to_sector() An overflow issue can occur while calculating sector in exfat_cluster_to_sector(). It needs to cast clus's type to sector_t before left shifting. Fixes: 1acf1a564b60 ("exfat: add in-memory and on-disk structures and headers") Cc: stable@vger.kernel.org # v5.7 Reviewed-by: Sungjong Seo Signed-off-by: Namjae Jeon --- fs/exfat/exfat_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/exfat/exfat_fs.h b/fs/exfat/exfat_fs.h index 7579cd3bbadb..75c7bdbeba6d 100644 --- a/fs/exfat/exfat_fs.h +++ b/fs/exfat/exfat_fs.h @@ -371,7 +371,7 @@ static inline bool exfat_is_last_sector_in_cluster(struct exfat_sb_info *sbi, static inline sector_t exfat_cluster_to_sector(struct exfat_sb_info *sbi, unsigned int clus) { - return ((clus - EXFAT_RESERVED_CLUSTERS) << sbi->sect_per_clus_bits) + + return ((sector_t)(clus - EXFAT_RESERVED_CLUSTERS) << sbi->sect_per_clus_bits) + sbi->data_start_sector; } -- cgit v1.2.3 From d2fa0c337d97a5490190b9f3b9c73c8f9f3602a1 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Fri, 3 Jul 2020 11:19:46 +0900 Subject: exfat: fix wrong hint_stat initialization in exfat_find_dir_entry() We found the wrong hint_stat initialization in exfat_find_dir_entry(). It should be initialized when cluster is EXFAT_EOF_CLUSTER. Fixes: ca06197382bd ("exfat: add directory operations") Cc: stable@vger.kernel.org # v5.7 Reviewed-by: Sungjong Seo Signed-off-by: Namjae Jeon --- fs/exfat/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/exfat/dir.c b/fs/exfat/dir.c index 91ece649285d..119abf0d8dd6 100644 --- a/fs/exfat/dir.c +++ b/fs/exfat/dir.c @@ -1112,7 +1112,7 @@ found: ret = exfat_get_next_cluster(sb, &clu.dir); } - if (ret || clu.dir != EXFAT_EOF_CLUSTER) { + if (ret || clu.dir == EXFAT_EOF_CLUSTER) { /* just initialized hint_stat */ hint_stat->clu = p_dir->dir; hint_stat->eidx = 0; -- cgit v1.2.3 From 41e3928f8c58184fcf0bb22e822af39a436370c7 Mon Sep 17 00:00:00 2001 From: Hyeongseok Kim Date: Wed, 8 Jul 2020 18:52:33 +0900 Subject: exfat: fix wrong size update of stream entry by typo The stream.size field is updated to the value of create timestamp of the file entry. Fix this to use correct stream entry pointer. Fixes: 29bbb14bfc80 ("exfat: fix incorrect update of stream entry in __exfat_truncate()") Signed-off-by: Hyeongseok Kim Signed-off-by: Namjae Jeon --- fs/exfat/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/exfat/file.c b/fs/exfat/file.c index 3b7fea465fd4..a6a063830edc 100644 --- a/fs/exfat/file.c +++ b/fs/exfat/file.c @@ -176,7 +176,7 @@ int __exfat_truncate(struct inode *inode, loff_t new_size) ep2->dentry.stream.size = 0; } else { ep2->dentry.stream.valid_size = cpu_to_le64(new_size); - ep2->dentry.stream.size = ep->dentry.stream.valid_size; + ep2->dentry.stream.size = ep2->dentry.stream.valid_size; } if (new_size == 0) { -- cgit v1.2.3 From db415f7aae07cadcabd5d2a659f8ad825c905299 Mon Sep 17 00:00:00 2001 From: Ilya Ponetayev Date: Thu, 16 Jul 2020 17:27:53 +0900 Subject: exfat: fix name_hash computation on big endian systems On-disk format for name_hash field is LE, so it must be explicitly transformed on BE system for proper result. Fixes: 370e812b3ec1 ("exfat: add nls operations") Cc: stable@vger.kernel.org # v5.7 Signed-off-by: Chen Minqiang Signed-off-by: Ilya Ponetayev Reviewed-by: Sungjong Seo Signed-off-by: Namjae Jeon --- fs/exfat/nls.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/exfat/nls.c b/fs/exfat/nls.c index 57b5a7a4d1f7..a3c927501e67 100644 --- a/fs/exfat/nls.c +++ b/fs/exfat/nls.c @@ -495,7 +495,7 @@ static int exfat_utf8_to_utf16(struct super_block *sb, struct exfat_uni_name *p_uniname, int *p_lossy) { int i, unilen, lossy = NLS_NAME_NO_LOSSY; - unsigned short upname[MAX_NAME_LENGTH + 1]; + __le16 upname[MAX_NAME_LENGTH + 1]; unsigned short *uniname = p_uniname->name; WARN_ON(!len); @@ -519,7 +519,7 @@ static int exfat_utf8_to_utf16(struct super_block *sb, exfat_wstrchr(bad_uni_chars, *uniname)) lossy |= NLS_NAME_LOSSY; - upname[i] = exfat_toupper(sb, *uniname); + upname[i] = cpu_to_le16(exfat_toupper(sb, *uniname)); uniname++; } @@ -597,7 +597,7 @@ static int exfat_nls_to_ucs2(struct super_block *sb, struct exfat_uni_name *p_uniname, int *p_lossy) { int i = 0, unilen = 0, lossy = NLS_NAME_NO_LOSSY; - unsigned short upname[MAX_NAME_LENGTH + 1]; + __le16 upname[MAX_NAME_LENGTH + 1]; unsigned short *uniname = p_uniname->name; struct nls_table *nls = EXFAT_SB(sb)->nls_io; @@ -611,7 +611,7 @@ static int exfat_nls_to_ucs2(struct super_block *sb, exfat_wstrchr(bad_uni_chars, *uniname)) lossy |= NLS_NAME_LOSSY; - upname[unilen] = exfat_toupper(sb, *uniname); + upname[unilen] = cpu_to_le16(exfat_toupper(sb, *uniname)); uniname++; unilen++; } -- cgit v1.2.3 From 6ef9dcb78046b346b5508ca1659848b136a343c2 Mon Sep 17 00:00:00 2001 From: Tung Nguyen Date: Tue, 21 Jul 2020 08:57:05 +0700 Subject: tipc: allow to build NACK message in link timeout function Commit 02288248b051 ("tipc: eliminate gap indicator from ACK messages") eliminated sending of the 'gap' indicator in regular ACK messages and only allowed to build NACK message with enabled probe/probe_reply. However, necessary correction for building NACK message was missed in tipc_link_timeout() function. This leads to significant delay and link reset (due to retransmission failure) in lossy environment. This commit fixes it by setting the 'probe' flag to 'true' when the receive deferred queue is not empty. As a result, NACK message will be built to send back to another peer. Fixes: 02288248b051 ("tipc: eliminate gap indicator from ACK messages") Acked-by: Jon Maloy Signed-off-by: Tung Nguyen Signed-off-by: David S. Miller --- net/tipc/link.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/tipc/link.c b/net/tipc/link.c index 263d950e70e9..d40f8e5b7683 100644 --- a/net/tipc/link.c +++ b/net/tipc/link.c @@ -827,11 +827,11 @@ int tipc_link_timeout(struct tipc_link *l, struct sk_buff_head *xmitq) state |= l->bc_rcvlink->rcv_unacked; state |= l->rcv_unacked; state |= !skb_queue_empty(&l->transmq); - state |= !skb_queue_empty(&l->deferdq); probe = mstate->probing; probe |= l->silent_intv_cnt; if (probe || mstate->monitoring) l->silent_intv_cnt++; + probe |= !skb_queue_empty(&l->deferdq); if (l->snd_nxt == l->checkpoint) { tipc_link_update_cwin(l, 0, 0); probe = true; -- cgit v1.2.3 From 4cb699d0447be8e0906539f93cbe41e19598ee5a Mon Sep 17 00:00:00 2001 From: Vincent Chen Date: Fri, 10 Jul 2020 10:40:54 +0800 Subject: riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfence It fails to boot the v5.8-rc4 kernel with CONFIG_KASAN because kasan_init and kasan_early_init use uninitialized __sbi_rfence as executing the tlb_flush_all(). Actually, at this moment, only the CPU which is responsible for the system initialization enables the MMU. Other CPUs are parking at the .Lsecondary_start. Hence the tlb_flush_all() is able to be replaced by local_tlb_flush_all() to avoid using uninitialized __sbi_rfence. Signed-off-by: Vincent Chen Signed-off-by: Palmer Dabbelt --- arch/riscv/mm/kasan_init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/riscv/mm/kasan_init.c b/arch/riscv/mm/kasan_init.c index 4a8b61806633..87b4ab3d3c77 100644 --- a/arch/riscv/mm/kasan_init.c +++ b/arch/riscv/mm/kasan_init.c @@ -44,7 +44,7 @@ asmlinkage void __init kasan_early_init(void) (__pa(((uintptr_t) kasan_early_shadow_pmd))), __pgprot(_PAGE_TABLE))); - flush_tlb_all(); + local_flush_tlb_all(); } static void __init populate(void *start, void *end) @@ -79,7 +79,7 @@ static void __init populate(void *start, void *end) pfn_pgd(PFN_DOWN(__pa(&pmd[offset])), __pgprot(_PAGE_TABLE))); - flush_tlb_all(); + local_flush_tlb_all(); memset(start, 0, end - start); } -- cgit v1.2.3 From 3d3af181d370069861a3be94608464e2ff3682e2 Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Fri, 17 Jul 2020 11:27:22 +0200 Subject: s390/cpum_cf,perf: change DFLT_CCERROR counter name Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15. This counter counts completed DEFLATE instructions with exit code 0, 1 or 2. Since exit code 0 means success and exit code 1 or 2 indicate errors, change the counter name to avoid confusion. This counter is incremented each time the DEFLATE instruction completed regardless if an error was detected or not. Fixes: d68d5d51dc89 ("s390/cpum_cf: Add new extended counters for IBM z15") Fixes: e7950166e402 ("perf vendor events s390: Add new deflate counters for IBM z15") Cc: stable@vger.kernel.org # v5.7 Signed-off-by: Thomas Richter Reviewed-by: Sumanth Korikkar Signed-off-by: Heiko Carstens --- arch/s390/kernel/perf_cpum_cf_events.c | 4 ++-- tools/perf/pmu-events/arch/s390/cf_z15/extended.json | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/s390/kernel/perf_cpum_cf_events.c b/arch/s390/kernel/perf_cpum_cf_events.c index 1e3df52b2b65..37265f551a11 100644 --- a/arch/s390/kernel/perf_cpum_cf_events.c +++ b/arch/s390/kernel/perf_cpum_cf_events.c @@ -292,7 +292,7 @@ CPUMF_EVENT_ATTR(cf_z15, TX_C_TABORT_SPECIAL, 0x00f5); CPUMF_EVENT_ATTR(cf_z15, DFLT_ACCESS, 0x00f7); CPUMF_EVENT_ATTR(cf_z15, DFLT_CYCLES, 0x00fc); CPUMF_EVENT_ATTR(cf_z15, DFLT_CC, 0x00108); -CPUMF_EVENT_ATTR(cf_z15, DFLT_CCERROR, 0x00109); +CPUMF_EVENT_ATTR(cf_z15, DFLT_CCFINISH, 0x00109); CPUMF_EVENT_ATTR(cf_z15, MT_DIAG_CYCLES_ONE_THR_ACTIVE, 0x01c0); CPUMF_EVENT_ATTR(cf_z15, MT_DIAG_CYCLES_TWO_THR_ACTIVE, 0x01c1); @@ -629,7 +629,7 @@ static struct attribute *cpumcf_z15_pmu_event_attr[] __initdata = { CPUMF_EVENT_PTR(cf_z15, DFLT_ACCESS), CPUMF_EVENT_PTR(cf_z15, DFLT_CYCLES), CPUMF_EVENT_PTR(cf_z15, DFLT_CC), - CPUMF_EVENT_PTR(cf_z15, DFLT_CCERROR), + CPUMF_EVENT_PTR(cf_z15, DFLT_CCFINISH), CPUMF_EVENT_PTR(cf_z15, MT_DIAG_CYCLES_ONE_THR_ACTIVE), CPUMF_EVENT_PTR(cf_z15, MT_DIAG_CYCLES_TWO_THR_ACTIVE), NULL, diff --git a/tools/perf/pmu-events/arch/s390/cf_z15/extended.json b/tools/perf/pmu-events/arch/s390/cf_z15/extended.json index 2df2e231e9ee..24c4ba2a9ae5 100644 --- a/tools/perf/pmu-events/arch/s390/cf_z15/extended.json +++ b/tools/perf/pmu-events/arch/s390/cf_z15/extended.json @@ -380,7 +380,7 @@ { "Unit": "CPU-M-CF", "EventCode": "265", - "EventName": "DFLT_CCERROR", + "EventName": "DFLT_CCFINISH", "BriefDescription": "Increments by one for every DEFLATE CONVERSION CALL instruction executed that ended in Condition Codes 0, 1 or 2", "PublicDescription": "Increments by one for every DEFLATE CONVERSION CALL instruction executed that ended in Condition Codes 0, 1 or 2" }, -- cgit v1.2.3 From 6cfcd5563b4fadbf49ba8fa481978e5e86d30322 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 13 Jul 2020 09:26:01 -0700 Subject: clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4 Carlos Hernandez reported that we now have a suspend and resume regresssion on am3 and am4 compared to the earlier kernels. While suspend and resume works with v5.8-rc3, we now get errors with rtcwake: pm33xx pm33xx: PM: Could not transition all powerdomains to target state ... rtcwake: write error This is because we now fail to idle the system timer clocks that the idle code checks and the error gets propagated to the rtcwake. Turns out there are several issues that need to be fixed: 1. Ignore no-idle and no-reset configured timers for the ti-sysc interconnect target driver as otherwise it will keep the system timer clocks enabled 2. Toggle the system timer functional clock for suspend for am3 and am4 (but not for clocksource on am3) 3. Only reconfigure type1 timers in dmtimer_systimer_disable() 4. Use of_machine_is_compatible() instead of of_device_is_compatible() for checking the SoC type Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Reported-by: Carlos Hernandez Signed-off-by: Tony Lindgren Tested-by: Carlos Hernandez Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200713162601.6829-1-tony@atomide.com --- drivers/bus/ti-sysc.c | 22 ++++++++++++++ drivers/clocksource/timer-ti-dm-systimer.c | 46 +++++++++++++++++++++++------- 2 files changed, 58 insertions(+), 10 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index bb54fb514e40..c6427d0bc94c 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -2864,6 +2864,24 @@ static int sysc_check_disabled_devices(struct sysc *ddata) return error; } +/* + * Ignore timers tagged with no-reset and no-idle. These are likely in use, + * for example by drivers/clocksource/timer-ti-dm-systimer.c. If more checks + * are needed, we could also look at the timer register configuration. + */ +static int sysc_check_active_timer(struct sysc *ddata) +{ + if (ddata->cap->type != TI_SYSC_OMAP2_TIMER && + ddata->cap->type != TI_SYSC_OMAP4_TIMER) + return 0; + + if ((ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT) && + (ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE)) + return -EBUSY; + + return 0; +} + static const struct of_device_id sysc_match_table[] = { { .compatible = "simple-bus", }, { /* sentinel */ }, @@ -2920,6 +2938,10 @@ static int sysc_probe(struct platform_device *pdev) if (error) return error; + error = sysc_check_active_timer(ddata); + if (error) + return error; + error = sysc_get_clocks(ddata); if (error) return error; diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c index 6fd1f219a512..f6fd1c1cc527 100644 --- a/drivers/clocksource/timer-ti-dm-systimer.c +++ b/drivers/clocksource/timer-ti-dm-systimer.c @@ -19,7 +19,7 @@ /* For type1, set SYSC_OMAP2_CLOCKACTIVITY for fck off on idle, l4 clock on */ #define DMTIMER_TYPE1_ENABLE ((1 << 9) | (SYSC_IDLE_SMART << 3) | \ SYSC_OMAP2_ENAWAKEUP | SYSC_OMAP2_AUTOIDLE) - +#define DMTIMER_TYPE1_DISABLE (SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE) #define DMTIMER_TYPE2_ENABLE (SYSC_IDLE_SMART_WKUP << 2) #define DMTIMER_RESET_WAIT 100000 @@ -44,6 +44,8 @@ struct dmtimer_systimer { u8 ctrl; u8 wakeup; u8 ifctrl; + struct clk *fck; + struct clk *ick; unsigned long rate; }; @@ -298,16 +300,20 @@ static void __init dmtimer_systimer_select_best(void) } /* Interface clocks are only available on some SoCs variants */ -static int __init dmtimer_systimer_init_clock(struct device_node *np, +static int __init dmtimer_systimer_init_clock(struct dmtimer_systimer *t, + struct device_node *np, const char *name, unsigned long *rate) { struct clk *clock; unsigned long r; + bool is_ick = false; int error; + is_ick = !strncmp(name, "ick", 3); + clock = of_clk_get_by_name(np, name); - if ((PTR_ERR(clock) == -EINVAL) && !strncmp(name, "ick", 3)) + if ((PTR_ERR(clock) == -EINVAL) && is_ick) return 0; else if (IS_ERR(clock)) return PTR_ERR(clock); @@ -320,6 +326,11 @@ static int __init dmtimer_systimer_init_clock(struct device_node *np, if (!r) return -ENODEV; + if (is_ick) + t->ick = clock; + else + t->fck = clock; + *rate = r; return 0; @@ -339,7 +350,10 @@ static void dmtimer_systimer_enable(struct dmtimer_systimer *t) static void dmtimer_systimer_disable(struct dmtimer_systimer *t) { - writel_relaxed(0, t->base + t->sysc); + if (!dmtimer_systimer_revision1(t)) + return; + + writel_relaxed(DMTIMER_TYPE1_DISABLE, t->base + t->sysc); } static int __init dmtimer_systimer_setup(struct device_node *np, @@ -366,13 +380,13 @@ static int __init dmtimer_systimer_setup(struct device_node *np, pr_err("%s: clock source init failed: %i\n", __func__, error); /* For ti-sysc, we have timer clocks at the parent module level */ - error = dmtimer_systimer_init_clock(np->parent, "fck", &rate); + error = dmtimer_systimer_init_clock(t, np->parent, "fck", &rate); if (error) goto err_unmap; t->rate = rate; - error = dmtimer_systimer_init_clock(np->parent, "ick", &rate); + error = dmtimer_systimer_init_clock(t, np->parent, "ick", &rate); if (error) goto err_unmap; @@ -496,12 +510,18 @@ static void omap_clockevent_idle(struct clock_event_device *evt) struct dmtimer_systimer *t = &clkevt->t; dmtimer_systimer_disable(t); + clk_disable(t->fck); } static void omap_clockevent_unidle(struct clock_event_device *evt) { struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt); struct dmtimer_systimer *t = &clkevt->t; + int error; + + error = clk_enable(t->fck); + if (error) + pr_err("could not enable timer fck on resume: %i\n", error); dmtimer_systimer_enable(t); writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_ena); @@ -570,8 +590,8 @@ static int __init dmtimer_clockevent_init(struct device_node *np) 3, /* Timer internal resynch latency */ 0xffffffff); - if (of_device_is_compatible(np, "ti,am33xx") || - of_device_is_compatible(np, "ti,am43")) { + if (of_machine_is_compatible("ti,am33xx") || + of_machine_is_compatible("ti,am43")) { dev->suspend = omap_clockevent_idle; dev->resume = omap_clockevent_unidle; } @@ -616,12 +636,18 @@ static void dmtimer_clocksource_suspend(struct clocksource *cs) clksrc->loadval = readl_relaxed(t->base + t->counter); dmtimer_systimer_disable(t); + clk_disable(t->fck); } static void dmtimer_clocksource_resume(struct clocksource *cs) { struct dmtimer_clocksource *clksrc = to_dmtimer_clocksource(cs); struct dmtimer_systimer *t = &clksrc->t; + int error; + + error = clk_enable(t->fck); + if (error) + pr_err("could not enable timer fck on resume: %i\n", error); dmtimer_systimer_enable(t); writel_relaxed(clksrc->loadval, t->base + t->counter); @@ -653,8 +679,8 @@ static int __init dmtimer_clocksource_init(struct device_node *np) dev->mask = CLOCKSOURCE_MASK(32); dev->flags = CLOCK_SOURCE_IS_CONTINUOUS; - if (of_device_is_compatible(np, "ti,am33xx") || - of_device_is_compatible(np, "ti,am43")) { + /* Unlike for clockevent, legacy code sets suspend only for am4 */ + if (of_machine_is_compatible("ti,am43")) { dev->suspend = dmtimer_clocksource_suspend; dev->resume = dmtimer_clocksource_resume; } -- cgit v1.2.3 From a862192e9227ad46e0447fd0a03869ba1b30d16f Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Sun, 19 Jul 2020 09:54:35 +0300 Subject: RDMA/mlx5: Prevent prefetch from racing with implicit destruction Prefetch work in mlx5_ib_prefetch_mr_work can be queued and able to run concurrently with destruction of the implicit MR. The num_deferred_work was intended to serialize this, but there is a race: CPU0 CPU1 mlx5_ib_free_implicit_mr() xa_erase(odp_mkeys) synchronize_srcu() __xa_erase(implicit_children) mlx5_ib_prefetch_mr_work() pagefault_mr() pagefault_implicit_mr() implicit_get_child_mr() xa_cmpxchg() atomic_dec_and_test(num_deferred_mr) wait_event(imr->q_deferred_work) ib_umem_odp_release(odp_imr) kfree(odp_imr) At this point in mlx5_ib_free_implicit_mr() the implicit_children list is supposed to be empty forever so that destroy_unused_implicit_child_mr() and related are not and will not be running. Since it is not empty the destroy_unused_implicit_child_mr() flow ends up touching deallocated memory as mlx5_ib_free_implicit_mr() already tore down the imr parent. The solution is to flush out the prefetch wq by driving num_deferred_work to zero after creation of new prefetch work is blocked. Fixes: 5256edcb98a1 ("RDMA/mlx5: Rework implicit ODP destroy") Link: https://lore.kernel.org/r/20200719065435.130722-1-leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/odp.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/odp.c b/drivers/infiniband/hw/mlx5/odp.c index 7d2ec9ee5097..1ab676b66894 100644 --- a/drivers/infiniband/hw/mlx5/odp.c +++ b/drivers/infiniband/hw/mlx5/odp.c @@ -601,6 +601,23 @@ void mlx5_ib_free_implicit_mr(struct mlx5_ib_mr *imr) */ synchronize_srcu(&dev->odp_srcu); + /* + * All work on the prefetch list must be completed, xa_erase() prevented + * new work from being created. + */ + wait_event(imr->q_deferred_work, !atomic_read(&imr->num_deferred_work)); + + /* + * At this point it is forbidden for any other thread to enter + * pagefault_mr() on this imr. It is already forbidden to call + * pagefault_mr() on an implicit child. Due to this additions to + * implicit_children are prevented. + */ + + /* + * Block destroy_unused_implicit_child_mr() from incrementing + * num_deferred_work. + */ xa_lock(&imr->implicit_children); xa_for_each (&imr->implicit_children, idx, mtt) { __xa_erase(&imr->implicit_children, idx); @@ -609,9 +626,8 @@ void mlx5_ib_free_implicit_mr(struct mlx5_ib_mr *imr) xa_unlock(&imr->implicit_children); /* - * num_deferred_work can only be incremented inside the odp_srcu, or - * under xa_lock while the child is in the xarray. Thus at this point - * it is only decreasing, and all work holding it is now on the wq. + * Wait for any concurrent destroy_unused_implicit_child_mr() to + * complete. */ wait_event(imr->q_deferred_work, !atomic_read(&imr->num_deferred_work)); -- cgit v1.2.3 From 580c079b5766ac706f56eec5c79aee4bf929fef6 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 13 Jul 2020 15:11:56 +0100 Subject: btrfs: fix double free on ulist after backref resolution failure At btrfs_find_all_roots_safe() we allocate a ulist and set the **roots argument to point to it. However if later we fail due to an error returned by find_parent_nodes(), we free that ulist but leave a dangling pointer in the **roots argument. Upon receiving the error, a caller of this function can attempt to free the same ulist again, resulting in an invalid memory access. One such scenario is during qgroup accounting: btrfs_qgroup_account_extents() --> calls btrfs_find_all_roots() passes &new_roots (a stack allocated pointer) to btrfs_find_all_roots() --> btrfs_find_all_roots() just calls btrfs_find_all_roots_safe() passing &new_roots to it --> allocates ulist and assigns its address to **roots (which points to new_roots from btrfs_qgroup_account_extents()) --> find_parent_nodes() returns an error, so we free the ulist and leave **roots pointing to it after returning --> btrfs_qgroup_account_extents() sees btrfs_find_all_roots() returned an error and jumps to the label 'cleanup', which just tries to free again the same ulist Stack trace example: ------------[ cut here ]------------ BTRFS: tree first key check failed WARNING: CPU: 1 PID: 1763215 at fs/btrfs/disk-io.c:422 btrfs_verify_level_key+0xe0/0x180 [btrfs] Modules linked in: dm_snapshot dm_thin_pool (...) CPU: 1 PID: 1763215 Comm: fsstress Tainted: G W 5.8.0-rc3-btrfs-next-64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_verify_level_key+0xe0/0x180 [btrfs] Code: 28 5b 5d (...) RSP: 0018:ffffb89b473779a0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff90397759bf08 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000027 RDI: 00000000ffffffff RBP: ffff9039a419c000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: ffffb89b43301000 R12: 000000000000005e R13: ffffb89b47377a2e R14: ffffb89b473779af R15: 0000000000000000 FS: 00007fc47e1e1000(0000) GS:ffff9039ac200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc47e1df000 CR3: 00000003d9e4e001 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: read_block_for_search+0xf6/0x350 [btrfs] btrfs_next_old_leaf+0x242/0x650 [btrfs] resolve_indirect_refs+0x7cf/0x9e0 [btrfs] find_parent_nodes+0x4ea/0x12c0 [btrfs] btrfs_find_all_roots_safe+0xbf/0x130 [btrfs] btrfs_qgroup_account_extents+0x9d/0x390 [btrfs] btrfs_commit_transaction+0x4f7/0xb20 [btrfs] btrfs_sync_file+0x3d4/0x4d0 [btrfs] do_fsync+0x38/0x70 __x64_sys_fdatasync+0x13/0x20 do_syscall_64+0x5c/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc47e2d72e3 Code: Bad RIP value. RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [] copy_process+0x755/0x1eb0 softirqs last enabled at (0): [] copy_process+0x755/0x1eb0 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace 8639237550317b48 ]--- BTRFS error (device sdc): tree first key mismatch detected, bytenr=62324736 parent_transid=94 key expected=(262,108,1351680) has=(259,108,1921024) general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 1763215 Comm: fsstress Tainted: G W 5.8.0-rc3-btrfs-next-64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ulist_release+0x14/0x60 [btrfs] Code: c7 07 00 (...) RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840 FS: 00007fc47e1e1000(0000) GS:ffff9039ac600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8c1c0a51c8 CR3: 00000003d9e4e004 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ulist_free+0x13/0x20 [btrfs] btrfs_qgroup_account_extents+0xf3/0x390 [btrfs] btrfs_commit_transaction+0x4f7/0xb20 [btrfs] btrfs_sync_file+0x3d4/0x4d0 [btrfs] do_fsync+0x38/0x70 __x64_sys_fdatasync+0x13/0x20 do_syscall_64+0x5c/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc47e2d72e3 Code: Bad RIP value. RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50 Modules linked in: dm_snapshot dm_thin_pool (...) ---[ end trace 8639237550317b49 ]--- RIP: 0010:ulist_release+0x14/0x60 [btrfs] Code: c7 07 00 (...) RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840 FS: 00007fc47e1e1000(0000) GS:ffff9039ad200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6a776f7d40 CR3: 00000003d9e4e002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fix this by making btrfs_find_all_roots_safe() set *roots to NULL after it frees the ulist. Fixes: 8da6d5815c592b ("Btrfs: added btrfs_find_all_roots()") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/backref.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index d888e71e66b6..ea10f7bc99ab 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -1461,6 +1461,7 @@ static int btrfs_find_all_roots_safe(struct btrfs_trans_handle *trans, if (ret < 0 && ret != -ENOENT) { ulist_free(tmp); ulist_free(*roots); + *roots = NULL; return ret; } node = ulist_next(tmp, &uiter); -- cgit v1.2.3 From 88bb16ad998a0395fe4b346b7d3f621aaa0a2324 Mon Sep 17 00:00:00 2001 From: Qiu Wenbo Date: Fri, 17 Jul 2020 15:09:57 +0800 Subject: drm/amd/powerplay: fix a crash when overclocking Vega M Avoid kernel crash when vddci_control is SMU7_VOLTAGE_CONTROL_NONE and vddci_voltage_table is empty. It has been tested on Intel Hades Canyon (i7-8809G). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208489 Fixes: ac7822b0026f ("drm/amd/powerplay: add smumgr support for VEGAM (v2)") Reviewed-by: Evan Quan Signed-off-by: Qiu Wenbo Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c index 3da71a088b92..0ecc18b55ffb 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c @@ -644,9 +644,6 @@ static int vegam_get_dependency_volt_by_clk(struct pp_hwmgr *hwmgr, /* sclk is bigger than max sclk in the dependence table */ *voltage |= (dep_table->entries[i - 1].vddc * VOLTAGE_SCALE) << VDDC_SHIFT; - vddci = phm_find_closest_vddci(&(data->vddci_voltage_table), - (dep_table->entries[i - 1].vddc - - (uint16_t)VDDC_VDDCI_DELTA)); if (SMU7_VOLTAGE_CONTROL_NONE == data->vddci_control) *voltage |= (data->vbios_boot_state.vddci_bootup_value * @@ -654,8 +651,13 @@ static int vegam_get_dependency_volt_by_clk(struct pp_hwmgr *hwmgr, else if (dep_table->entries[i - 1].vddci) *voltage |= (dep_table->entries[i - 1].vddci * VOLTAGE_SCALE) << VDDC_SHIFT; - else + else { + vddci = phm_find_closest_vddci(&(data->vddci_voltage_table), + (dep_table->entries[i - 1].vddc - + (uint16_t)VDDC_VDDCI_DELTA)); + *voltage |= (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT; + } if (SMU7_VOLTAGE_CONTROL_NONE == data->mvdd_control) *mvdd = data->vbios_boot_state.mvdd_bootup_value * VOLTAGE_SCALE; -- cgit v1.2.3 From 38e0c89a19fd13f28d2b4721035160a3e66e270b Mon Sep 17 00:00:00 2001 From: Paweł Gronowski Date: Sun, 19 Jul 2020 17:54:53 +0200 Subject: drm/amdgpu: Fix NULL dereference in dpm sysfs handlers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit NULL dereference occurs when string that is not ended with space or newline is written to some dpm sysfs interface (for example pp_dpm_sclk). This happens because strsep replaces the tmp with NULL if the delimiter is not present in string, which is then dereferenced by tmp[0]. Reproduction example: sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk' Signed-off-by: Paweł Gronowski Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c index 02e6f8c4dde0..ebb8a28ff002 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c @@ -778,8 +778,7 @@ static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev, tmp_str++; while (isspace(*++tmp_str)); - while (tmp_str[0]) { - sub_str = strsep(&tmp_str, delimiter); + while ((sub_str = strsep(&tmp_str, delimiter)) != NULL) { ret = kstrtol(sub_str, 0, ¶meter[parameter_size]); if (ret) return -EINVAL; @@ -1039,8 +1038,7 @@ static ssize_t amdgpu_read_mask(const char *buf, size_t count, uint32_t *mask) memcpy(buf_cpy, buf, bytes); buf_cpy[bytes] = '\0'; tmp = buf_cpy; - while (tmp[0]) { - sub_str = strsep(&tmp, delimiter); + while ((sub_str = strsep(&tmp, delimiter)) != NULL) { if (strlen(sub_str)) { ret = kstrtol(sub_str, 0, &level); if (ret) @@ -1637,8 +1635,7 @@ static ssize_t amdgpu_set_pp_power_profile_mode(struct device *dev, i++; memcpy(buf_cpy, buf, count-i); tmp_str = buf_cpy; - while (tmp_str[0]) { - sub_str = strsep(&tmp_str, delimiter); + while ((sub_str = strsep(&tmp_str, delimiter)) != NULL) { ret = kstrtol(sub_str, 0, ¶meter[parameter_size]); if (ret) return -EINVAL; -- cgit v1.2.3 From fa91e4aa1716004ea8096d5185ec0451e206aea0 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Fri, 17 Jul 2020 15:12:05 +0800 Subject: btrfs: qgroup: fix data leak caused by race between writeback and truncate [BUG] When running tests like generic/013 on test device with btrfs quota enabled, it can normally lead to data leak, detected at unmount time: BTRFS warning (device dm-3): qgroup 0/5 has unreleased space, type 0 rsv 4096 ------------[ cut here ]------------ WARNING: CPU: 11 PID: 16386 at fs/btrfs/disk-io.c:4142 close_ctree+0x1dc/0x323 [btrfs] RIP: 0010:close_ctree+0x1dc/0x323 [btrfs] Call Trace: btrfs_put_super+0x15/0x17 [btrfs] generic_shutdown_super+0x72/0x110 kill_anon_super+0x18/0x30 btrfs_kill_super+0x17/0x30 [btrfs] deactivate_locked_super+0x3b/0xa0 deactivate_super+0x40/0x50 cleanup_mnt+0x135/0x190 __cleanup_mnt+0x12/0x20 task_work_run+0x64/0xb0 __prepare_exit_to_usermode+0x1bc/0x1c0 __syscall_return_slowpath+0x47/0x230 do_syscall_64+0x64/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace caf08beafeca2392 ]--- BTRFS error (device dm-3): qgroup reserved space leaked [CAUSE] In the offending case, the offending operations are: 2/6: writev f2X[269 1 0 0 0 0] [1006997,67,288] 0 2/7: truncate f2X[269 1 0 0 48 1026293] 18388 0 The following sequence of events could happen after the writev(): CPU1 (writeback) | CPU2 (truncate) ----------------------------------------------------------------- btrfs_writepages() | |- extent_write_cache_pages() | |- Got page for 1003520 | | 1003520 is Dirty, no writeback | | So (!clear_page_dirty_for_io()) | | gets called for it | |- Now page 1003520 is Clean. | | | btrfs_setattr() | | |- btrfs_setsize() | | |- truncate_setsize() | | New i_size is 18388 |- __extent_writepage() | | |- page_offset() > i_size | |- btrfs_invalidatepage() | |- Page is clean, so no qgroup | callback executed This means, the qgroup reserved data space is not properly released in btrfs_invalidatepage() as the page is Clean. [FIX] Instead of checking the dirty bit of a page, call btrfs_qgroup_free_data() unconditionally in btrfs_invalidatepage(). As qgroup rsv are completely bound to the QGROUP_RESERVED bit of io_tree, not bound to page status, thus we won't cause double freeing anyway. Fixes: 0b34c261e235 ("btrfs: qgroup: Prevent qgroup->reserved from going subzero") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/inode.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 11f81a148350..b7dd5124941e 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -8136,20 +8136,17 @@ again: /* * Qgroup reserved space handler * Page here will be either - * 1) Already written to disk - * In this case, its reserved space is released from data rsv map - * and will be freed by delayed_ref handler finally. - * So even we call qgroup_free_data(), it won't decrease reserved - * space. - * 2) Not written to disk - * This means the reserved space should be freed here. However, - * if a truncate invalidates the page (by clearing PageDirty) - * and the page is accounted for while allocating extent - * in btrfs_check_data_free_space() we let delayed_ref to - * free the entire extent. + * 1) Already written to disk or ordered extent already submitted + * Then its QGROUP_RESERVED bit in io_tree is already cleaned. + * Qgroup will be handled by its qgroup_record then. + * btrfs_qgroup_free_data() call will do nothing here. + * + * 2) Not written to disk yet + * Then btrfs_qgroup_free_data() call will clear the QGROUP_RESERVED + * bit of its io_tree, and free the qgroup reserved data space. + * Since the IO will never happen for this page. */ - if (PageDirty(page)) - btrfs_qgroup_free_data(inode, NULL, page_start, PAGE_SIZE); + btrfs_qgroup_free_data(inode, NULL, page_start, PAGE_SIZE); if (!inode_evicting) { clear_extent_bit(tree, page_start, page_end, EXTENT_LOCKED | EXTENT_DELALLOC | EXTENT_DELALLOC_NEW | -- cgit v1.2.3 From 5909ca110b29aa16b23b52b8de8d3bb1035fd738 Mon Sep 17 00:00:00 2001 From: Robbie Ko Date: Mon, 20 Jul 2020 09:42:09 +0800 Subject: btrfs: fix page leaks after failure to lock page for delalloc When locking pages for delalloc, we check if it's dirty and mapping still matches. If it does not match, we need to return -EAGAIN and release all pages. Only the current page was put though, iterate over all the remaining pages too. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Filipe Manana Reviewed-by: Nikolay Borisov Signed-off-by: Robbie Ko Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/extent_io.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 95313bb7fe40..72c836b54efc 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1999,7 +1999,8 @@ static int __process_pages_contig(struct address_space *mapping, if (!PageDirty(pages[i]) || pages[i]->mapping != mapping) { unlock_page(pages[i]); - put_page(pages[i]); + for (; i < ret; i++) + put_page(pages[i]); err = -EAGAIN; goto out; } -- cgit v1.2.3 From 48cfa61b58a1fee0bc49eef04f8ccf31493b7cdd Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Thu, 16 Jul 2020 13:29:46 -0700 Subject: btrfs: fix mount failure caused by race with umount It is possible to cause a btrfs mount to fail by racing it with a slow umount. The crux of the sequence is generic_shutdown_super not yet calling sop->put_super before btrfs_mount_root calls btrfs_open_devices. If that occurs, btrfs_open_devices will decide the opened counter is non-zero, increment it, and skip resetting fs_devices->total_rw_bytes to 0. From here, mount will call sget which will result in grab_super trying to take the super block umount semaphore. That semaphore will be held by the slow umount, so mount will block. Before up-ing the semaphore, umount will delete the super block, resulting in mount's sget reliably allocating a new one, which causes the mount path to dutifully fill it out, and increment total_rw_bytes a second time, which causes the mount to fail, as we see double the expected bytes. Here is the sequence laid out in greater detail: CPU0 CPU1 down_write sb->s_umount btrfs_kill_super kill_anon_super(sb) generic_shutdown_super(sb); shrink_dcache_for_umount(sb); sync_filesystem(sb); evict_inodes(sb); // SLOW btrfs_mount_root btrfs_scan_one_device fs_devices = device->fs_devices fs_info->fs_devices = fs_devices // fs_devices-opened makes this a no-op btrfs_open_devices(fs_devices, mode, fs_type) s = sget(fs_type, test, set, flags, fs_info); find sb in s_instances grab_super(sb); down_write(&s->s_umount); // blocks sop->put_super(sb) // sb->fs_devices->opened == 2; no-op spin_lock(&sb_lock); hlist_del_init(&sb->s_instances); spin_unlock(&sb_lock); up_write(&sb->s_umount); return 0; retry lookup don't find sb in s_instances (deleted by CPU0) s = alloc_super return s; btrfs_fill_super(s, fs_devices, data) open_ctree // fs_devices total_rw_bytes improperly set! btrfs_read_chunk_tree read_one_dev // increment total_rw_bytes again!! super_total_bytes < fs_devices->total_rw_bytes // ERROR!!! To fix this, we clear total_rw_bytes from within btrfs_read_chunk_tree before the calls to read_one_dev, while holding the sb umount semaphore and the uuid mutex. To reproduce, it is sufficient to dirty a decent number of inodes, then quickly umount and mount. for i in $(seq 0 500) do dd if=/dev/zero of="/mnt/foo/$i" bs=1M count=1 done umount /mnt/foo& mount /mnt/foo does the trick for me. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Boris Burkov Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/volumes.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 0d6e785bcb98..f403fb1e6d37 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -7051,6 +7051,14 @@ int btrfs_read_chunk_tree(struct btrfs_fs_info *fs_info) mutex_lock(&uuid_mutex); mutex_lock(&fs_info->chunk_mutex); + /* + * It is possible for mount and umount to race in such a way that + * we execute this code path, but open_fs_devices failed to clear + * total_rw_bytes. We certainly want it cleared before reading the + * device items, so clear it here. + */ + fs_info->fs_devices->total_rw_bytes = 0; + /* * Read all device items, and then all the chunk items. All * device items are found before any chunk item (their object id -- cgit v1.2.3 From f2b2c55e512879a05456eaf5de4d1ed2f7757509 Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Tue, 21 Jul 2020 15:15:30 +0900 Subject: udp: Copy has_conns in reuseport_grow(). If an unconnected socket in a UDP reuseport group connect()s, has_conns is set to 1. Then, when a packet is received, udp[46]_lib_lookup2() scans all sockets in udp_hslot looking for the connected socket with the highest score. However, when the number of sockets bound to the port exceeds max_socks, reuseport_grow() resets has_conns to 0. It can cause udp[46]_lib_lookup2() to return without scanning all sockets, resulting in that packets sent to connected sockets may be distributed to unconnected sockets. Therefore, reuseport_grow() should copy has_conns. Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets") CC: Willem de Bruijn Reviewed-by: Benjamin Herrenschmidt Signed-off-by: Kuniyuki Iwashima Acked-by: Willem de Bruijn Signed-off-by: David S. Miller --- net/core/sock_reuseport.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/sock_reuseport.c b/net/core/sock_reuseport.c index adcb3aea576d..bbdd3c7b6cb5 100644 --- a/net/core/sock_reuseport.c +++ b/net/core/sock_reuseport.c @@ -101,6 +101,7 @@ static struct sock_reuseport *reuseport_grow(struct sock_reuseport *reuse) more_reuse->prog = reuse->prog; more_reuse->reuseport_id = reuse->reuseport_id; more_reuse->bind_inany = reuse->bind_inany; + more_reuse->has_conns = reuse->has_conns; memcpy(more_reuse->socks, reuse->socks, reuse->num_socks * sizeof(struct sock *)); -- cgit v1.2.3 From efc6b6f6c3113e8b203b9debfb72d81e0f3dcace Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Tue, 21 Jul 2020 15:15:31 +0900 Subject: udp: Improve load balancing for SO_REUSEPORT. Currently, SO_REUSEPORT does not work well if connected sockets are in a UDP reuseport group. Then reuseport_has_conns() returns true and the result of reuseport_select_sock() is discarded. Also, unconnected sockets have the same score, hence only does the first unconnected socket in udp_hslot always receive all packets sent to unconnected sockets. So, the result of reuseport_select_sock() should be used for load balancing. The noteworthy point is that the unconnected sockets placed after connected sockets in sock_reuseport.socks will receive more packets than others because of the algorithm in reuseport_select_sock(). index | connected | reciprocal_scale | result --------------------------------------------- 0 | no | 20% | 40% 1 | no | 20% | 20% 2 | yes | 20% | 0% 3 | no | 20% | 40% 4 | yes | 20% | 0% If most of the sockets are connected, this can be a problem, but it still works better than now. Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets") CC: Willem de Bruijn Reviewed-by: Benjamin Herrenschmidt Signed-off-by: Kuniyuki Iwashima Acked-by: Willem de Bruijn Signed-off-by: David S. Miller --- net/ipv4/udp.c | 15 +++++++++------ net/ipv6/udp.c | 15 +++++++++------ 2 files changed, 18 insertions(+), 12 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 1b7ebbcae497..99251d3c70d0 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -416,7 +416,7 @@ static struct sock *udp4_lib_lookup2(struct net *net, struct udp_hslot *hslot2, struct sk_buff *skb) { - struct sock *sk, *result; + struct sock *sk, *result, *reuseport_result; int score, badness; u32 hash = 0; @@ -426,17 +426,20 @@ static struct sock *udp4_lib_lookup2(struct net *net, score = compute_score(sk, net, saddr, sport, daddr, hnum, dif, sdif); if (score > badness) { + reuseport_result = NULL; + if (sk->sk_reuseport && sk->sk_state != TCP_ESTABLISHED) { hash = udp_ehashfn(net, daddr, hnum, saddr, sport); - result = reuseport_select_sock(sk, hash, skb, - sizeof(struct udphdr)); - if (result && !reuseport_has_conns(sk, false)) - return result; + reuseport_result = reuseport_select_sock(sk, hash, skb, + sizeof(struct udphdr)); + if (reuseport_result && !reuseport_has_conns(sk, false)) + return reuseport_result; } + + result = reuseport_result ? : sk; badness = score; - result = sk; } } return result; diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 7d4151747340..9503c87ac0b3 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -148,7 +148,7 @@ static struct sock *udp6_lib_lookup2(struct net *net, int dif, int sdif, struct udp_hslot *hslot2, struct sk_buff *skb) { - struct sock *sk, *result; + struct sock *sk, *result, *reuseport_result; int score, badness; u32 hash = 0; @@ -158,17 +158,20 @@ static struct sock *udp6_lib_lookup2(struct net *net, score = compute_score(sk, net, saddr, sport, daddr, hnum, dif, sdif); if (score > badness) { + reuseport_result = NULL; + if (sk->sk_reuseport && sk->sk_state != TCP_ESTABLISHED) { hash = udp6_ehashfn(net, daddr, hnum, saddr, sport); - result = reuseport_select_sock(sk, hash, skb, - sizeof(struct udphdr)); - if (result && !reuseport_has_conns(sk, false)) - return result; + reuseport_result = reuseport_select_sock(sk, hash, skb, + sizeof(struct udphdr)); + if (reuseport_result && !reuseport_has_conns(sk, false)) + return reuseport_result; } - result = sk; + + result = reuseport_result ? : sk; badness = score; } } -- cgit v1.2.3 From 015c5d5e6aa3523c758a70eb87b291cece2dbbb4 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 21 Jul 2020 15:23:12 +0900 Subject: net: ethernet: ravb: exit if re-initialization fails in tx timeout According to the report of [1], this driver is possible to cause the following error in ravb_tx_timeout_work(). ravb e6800000.ethernet ethernet: failed to switch device to config mode This error means that the hardware could not change the state from "Operation" to "Configuration" while some tx and/or rx queue are operating. After that, ravb_config() in ravb_dmac_init() will fail, and then any descriptors will be not allocaled anymore so that NULL pointer dereference happens after that on ravb_start_xmit(). To fix the issue, the ravb_tx_timeout_work() should check the return values of ravb_stop_dma() and ravb_dmac_init(). If ravb_stop_dma() fails, ravb_tx_timeout_work() re-enables TX and RX and just exits. If ravb_dmac_init() fails, just exits. [1] https://lore.kernel.org/linux-renesas-soc/20200518045452.2390-1-dirk.behme@de.bosch.com/ Reported-by: Dirk Behme Signed-off-by: Yoshihiro Shimoda Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index a442bcf64b9c..99f7aae102ce 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1450,6 +1450,7 @@ static void ravb_tx_timeout_work(struct work_struct *work) struct ravb_private *priv = container_of(work, struct ravb_private, work); struct net_device *ndev = priv->ndev; + int error; netif_tx_stop_all_queues(ndev); @@ -1458,15 +1459,36 @@ static void ravb_tx_timeout_work(struct work_struct *work) ravb_ptp_stop(ndev); /* Wait for DMA stopping */ - ravb_stop_dma(ndev); + if (ravb_stop_dma(ndev)) { + /* If ravb_stop_dma() fails, the hardware is still operating + * for TX and/or RX. So, this should not call the following + * functions because ravb_dmac_init() is possible to fail too. + * Also, this should not retry ravb_stop_dma() again and again + * here because it's possible to wait forever. So, this just + * re-enables the TX and RX and skip the following + * re-initialization procedure. + */ + ravb_rcv_snd_enable(ndev); + goto out; + } ravb_ring_free(ndev, RAVB_BE); ravb_ring_free(ndev, RAVB_NC); /* Device init */ - ravb_dmac_init(ndev); + error = ravb_dmac_init(ndev); + if (error) { + /* If ravb_dmac_init() fails, descriptors are freed. So, this + * should return here to avoid re-enabling the TX and RX in + * ravb_emac_init(). + */ + netdev_err(ndev, "%s: ravb_dmac_init() failed, error %d\n", + __func__, error); + return; + } ravb_emac_init(ndev); +out: /* Initialise PTP Clock driver */ if (priv->chip_id == RCAR_GEN2) ravb_ptp_init(ndev, priv->pdev); -- cgit v1.2.3 From 9bb5fbea59f36a589ef886292549ca4052fe676c Mon Sep 17 00:00:00 2001 From: Xiongfeng Wang Date: Tue, 21 Jul 2020 15:02:57 +0800 Subject: net-sysfs: add a newline when printing 'tx_timeout' by sysfs When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout 0root@syzkaller:~# Signed-off-by: Xiongfeng Wang Signed-off-by: David S. Miller --- net/core/net-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index e353b822bb15..7bd6440c63bf 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -1108,7 +1108,7 @@ static ssize_t tx_timeout_show(struct netdev_queue *queue, char *buf) trans_timeout = queue->trans_timeout; spin_unlock_irq(&queue->_xmit_lock); - return sprintf(buf, "%lu", trans_timeout); + return sprintf(buf, fmt_ulong, trans_timeout); } static unsigned int get_netdev_queue_index(struct netdev_queue *queue) -- cgit v1.2.3 From b0a422772fec29811e293c7c0e6f991c0fd9241d Mon Sep 17 00:00:00 2001 From: Miaohe Lin Date: Tue, 21 Jul 2020 17:11:44 +0800 Subject: net: udp: Fix wrong clean up for IS_UDPLITE macro We can't use IS_UDPLITE to replace udp_sk->pcflag when UDPLITE_RECV_CC is checked. Fixes: b2bf1e2659b1 ("[UDP]: Clean up for IS_UDPLITE macro") Signed-off-by: Miaohe Lin Signed-off-by: David S. Miller --- net/ipv4/udp.c | 2 +- net/ipv6/udp.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 99251d3c70d0..4077d589b72e 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -2054,7 +2054,7 @@ static int udp_queue_rcv_one_skb(struct sock *sk, struct sk_buff *skb) /* * UDP-Lite specific tests, ignored on UDP sockets */ - if ((is_udplite & UDPLITE_RECV_CC) && UDP_SKB_CB(skb)->partial_cov) { + if ((up->pcflag & UDPLITE_RECV_CC) && UDP_SKB_CB(skb)->partial_cov) { /* * MIB statistics other than incrementing the error count are diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 9503c87ac0b3..a8d74f44056a 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -646,7 +646,7 @@ static int udpv6_queue_rcv_one_skb(struct sock *sk, struct sk_buff *skb) /* * UDP-Lite specific tests, ignored on UDP sockets (see net/ipv4/udp.c). */ - if ((is_udplite & UDPLITE_RECV_CC) && UDP_SKB_CB(skb)->partial_cov) { + if ((up->pcflag & UDPLITE_RECV_CC) && UDP_SKB_CB(skb)->partial_cov) { if (up->pcrlen == 0) { /* full coverage was set */ net_dbg_ratelimited("UDPLITE6: partial coverage %d while full coverage %d requested\n", -- cgit v1.2.3 From 0ec3b6a7c026e8f404f76d6dda5dae8d262312a0 Mon Sep 17 00:00:00 2001 From: Yunsheng Lin Date: Tue, 21 Jul 2020 19:03:51 +0800 Subject: net: hns3: fix for not unmapping TX buffer correctly When a big TX buffer is sent using multi BD, the driver maps the whole TX buffer, and unmaps it using info in desc_cb corresponding to each BD, but only the info in the desc_cb of first BD is correct, other info in desc_cb is wrong, which causes TX unmapping problem when SMMU is on. Only set the mapping and freeing info in the desc_cb of first BD to fix this problem, because the TX buffer only need to be unmapped and freed once. Fixes: 1e8a7977d09f("net: hns3: add handling for big TX fragment") Signed-off-by: Yunsheng Lin Signed-off-by: Huzhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index c38f3bbe7d97..12f102647d8f 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -1118,12 +1118,12 @@ static int hns3_fill_desc(struct hns3_enet_ring *ring, void *priv, return -ENOMEM; } + desc_cb->priv = priv; desc_cb->length = size; + desc_cb->dma = dma; + desc_cb->type = type; if (likely(size <= HNS3_MAX_BD_SIZE)) { - desc_cb->priv = priv; - desc_cb->dma = dma; - desc_cb->type = type; desc->addr = cpu_to_le64(dma); desc->tx.send_size = cpu_to_le16(size); desc->tx.bdtp_fe_sc_vld_ra_ri = @@ -1140,13 +1140,6 @@ static int hns3_fill_desc(struct hns3_enet_ring *ring, void *priv, /* When frag size is bigger than hardware limit, split this frag */ for (k = 0; k < frag_buf_num; k++) { - /* The txbd's baseinfo of DESC_TYPE_PAGE & DESC_TYPE_SKB */ - desc_cb->priv = priv; - desc_cb->dma = dma + HNS3_MAX_BD_SIZE * k; - desc_cb->type = ((type == DESC_TYPE_FRAGLIST_SKB || - type == DESC_TYPE_SKB) && !k) ? - type : DESC_TYPE_PAGE; - /* now, fill the descriptor */ desc->addr = cpu_to_le64(dma + HNS3_MAX_BD_SIZE * k); desc->tx.send_size = cpu_to_le16((k == frag_buf_num - 1) ? @@ -1158,7 +1151,6 @@ static int hns3_fill_desc(struct hns3_enet_ring *ring, void *priv, /* move ring pointer to next */ ring_ptr_move_fw(ring, next_to_use); - desc_cb = &ring->desc_cb[ring->next_to_use]; desc = &ring->desc[ring->next_to_use]; } -- cgit v1.2.3 From 48ae74c9d89f827b39b5c07a1f02fc13637a3cd6 Mon Sep 17 00:00:00 2001 From: Yunsheng Lin Date: Tue, 21 Jul 2020 19:03:52 +0800 Subject: net: hns3: fix for not calculating TX BD send size correctly With GRO and fraglist support, the SKB can be aggregated to a total size of 65535, and when that SKB is forwarded through a bridge, the size of the SKB may be pushed to exceed the size of 65535 when br_dev_queue_push_xmit() is called. The max send size of BD supported by the HW is 65535, when a SKB with a headlen of over 65535 is sent to the driver, the driver needs to use multi BD to send the linear data, and the send size of the last BD is calculated incorrectly by the driver who is using '&' operation, which causes a TX error. Use '%' operation to fix this problem. Fixes: 3fe13ed95dd3 ("net: hns3: avoid mult + div op in critical data path") Signed-off-by: Yunsheng Lin Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 12f102647d8f..a8a5112a578c 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -1135,7 +1135,7 @@ static int hns3_fill_desc(struct hns3_enet_ring *ring, void *priv, } frag_buf_num = hns3_tx_bd_count(size); - sizeoflast = size & HNS3_TX_LAST_SIZE_M; + sizeoflast = size % HNS3_MAX_BD_SIZE; sizeoflast = sizeoflast ? sizeoflast : HNS3_MAX_BD_SIZE; /* When frag size is bigger than hardware limit, split this frag */ diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h index 66cd4395f781..a8776620acbc 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h @@ -165,8 +165,6 @@ enum hns3_nic_state { #define HNS3_TXD_MSS_S 0 #define HNS3_TXD_MSS_M (0x3fff << HNS3_TXD_MSS_S) -#define HNS3_TX_LAST_SIZE_M 0xffff - #define HNS3_VECTOR_TX_IRQ BIT_ULL(0) #define HNS3_VECTOR_RX_IRQ BIT_ULL(1) -- cgit v1.2.3 From 8ceca59fb3ed48a693171bd571c4fcbd555b7f1f Mon Sep 17 00:00:00 2001 From: Yunsheng Lin Date: Tue, 21 Jul 2020 19:03:53 +0800 Subject: net: hns3: fix error handling for desc filling The content of the TX desc is automatically cleared by the HW when the HW has sent out the packet to the wire. When desc filling fails in hns3_nic_net_xmit(), it will call hns3_clear_desc() to do the error handling, which miss zeroing of the TX desc and the checking if a unmapping is needed. So add the zeroing and checking in hns3_clear_desc() to avoid the above problem. Also add DESC_TYPE_UNKNOWN to indicate the info in desc_cb is not valid, because hns3_nic_reclaim_desc() may treat the desc_cb->type of zero as packet and add to the sent pkt statistics accordingly. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index d041cac9a487..088550db2de7 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -77,6 +77,7 @@ ((ring)->p = ((ring)->p - 1 + (ring)->desc_num) % (ring)->desc_num) enum hns_desc_type { + DESC_TYPE_UNKNOWN, DESC_TYPE_SKB, DESC_TYPE_FRAGLIST_SKB, DESC_TYPE_PAGE, diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index a8a5112a578c..33c481d11116 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -1338,6 +1338,10 @@ static void hns3_clear_desc(struct hns3_enet_ring *ring, int next_to_use_orig) unsigned int i; for (i = 0; i < ring->desc_num; i++) { + struct hns3_desc *desc = &ring->desc[ring->next_to_use]; + + memset(desc, 0, sizeof(*desc)); + /* check if this is where we started */ if (ring->next_to_use == next_to_use_orig) break; @@ -1345,6 +1349,9 @@ static void hns3_clear_desc(struct hns3_enet_ring *ring, int next_to_use_orig) /* rollback one */ ring_ptr_move_bw(ring, next_to_use); + if (!ring->desc_cb[ring->next_to_use].dma) + continue; + /* unmap the descriptor dma address */ if (ring->desc_cb[ring->next_to_use].type == DESC_TYPE_SKB || ring->desc_cb[ring->next_to_use].type == @@ -1361,6 +1368,7 @@ static void hns3_clear_desc(struct hns3_enet_ring *ring, int next_to_use_orig) ring->desc_cb[ring->next_to_use].length = 0; ring->desc_cb[ring->next_to_use].dma = 0; + ring->desc_cb[ring->next_to_use].type = DESC_TYPE_UNKNOWN; } } -- cgit v1.2.3 From fac24df7b9a6d9363abdff0e351ade041dd16daa Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Tue, 21 Jul 2020 19:03:54 +0800 Subject: net: hns3: fix return value error when query MAC link status fail Currently, PF queries the MAC link status per second by calling function hclge_get_mac_link_status(). It return the error code when failed to send cmdq command to firmware. It's incorrect, because this return value is used as the MAC link status, which 0 means link down, and none-zero means link up. So fixes it. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen Signed-off-by: Huazhong tan Signed-off-by: David S. Miller --- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 49 ++++++++++------------ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 3 ++ 2 files changed, 25 insertions(+), 27 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index d6bfdc6520df..bb4a6327035d 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -2673,11 +2673,10 @@ void hclge_task_schedule(struct hclge_dev *hdev, unsigned long delay_time) delay_time); } -static int hclge_get_mac_link_status(struct hclge_dev *hdev) +static int hclge_get_mac_link_status(struct hclge_dev *hdev, int *link_status) { struct hclge_link_status_cmd *req; struct hclge_desc desc; - int link_status; int ret; hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_QUERY_LINK_STATUS, true); @@ -2689,33 +2688,25 @@ static int hclge_get_mac_link_status(struct hclge_dev *hdev) } req = (struct hclge_link_status_cmd *)desc.data; - link_status = req->status & HCLGE_LINK_STATUS_UP_M; + *link_status = (req->status & HCLGE_LINK_STATUS_UP_M) > 0 ? + HCLGE_LINK_STATUS_UP : HCLGE_LINK_STATUS_DOWN; - return !!link_status; + return 0; } -static int hclge_get_mac_phy_link(struct hclge_dev *hdev) +static int hclge_get_mac_phy_link(struct hclge_dev *hdev, int *link_status) { - unsigned int mac_state; - int link_stat; + struct phy_device *phydev = hdev->hw.mac.phydev; + + *link_status = HCLGE_LINK_STATUS_DOWN; if (test_bit(HCLGE_STATE_DOWN, &hdev->state)) return 0; - mac_state = hclge_get_mac_link_status(hdev); - - if (hdev->hw.mac.phydev) { - if (hdev->hw.mac.phydev->state == PHY_RUNNING) - link_stat = mac_state & - hdev->hw.mac.phydev->link; - else - link_stat = 0; - - } else { - link_stat = mac_state; - } + if (phydev && (phydev->state != PHY_RUNNING || !phydev->link)) + return 0; - return !!link_stat; + return hclge_get_mac_link_status(hdev, link_status); } static void hclge_update_link_status(struct hclge_dev *hdev) @@ -2725,6 +2716,7 @@ static void hclge_update_link_status(struct hclge_dev *hdev) struct hnae3_handle *rhandle; struct hnae3_handle *handle; int state; + int ret; int i; if (!client) @@ -2733,7 +2725,12 @@ static void hclge_update_link_status(struct hclge_dev *hdev) if (test_and_set_bit(HCLGE_STATE_LINK_UPDATING, &hdev->state)) return; - state = hclge_get_mac_phy_link(hdev); + ret = hclge_get_mac_phy_link(hdev, &state); + if (ret) { + clear_bit(HCLGE_STATE_LINK_UPDATING, &hdev->state); + return; + } + if (state != hdev->hw.mac.link) { for (i = 0; i < hdev->num_vmdq_vport + 1; i++) { handle = &hdev->vport[i].nic; @@ -6524,14 +6521,15 @@ static int hclge_mac_link_status_wait(struct hclge_dev *hdev, int link_ret) { #define HCLGE_MAC_LINK_STATUS_NUM 100 + int link_status; int i = 0; int ret; do { - ret = hclge_get_mac_link_status(hdev); - if (ret < 0) + ret = hclge_get_mac_link_status(hdev, &link_status); + if (ret) return ret; - else if (ret == link_ret) + if (link_status == link_ret) return 0; msleep(HCLGE_LINK_STATUS_MS); @@ -6542,9 +6540,6 @@ static int hclge_mac_link_status_wait(struct hclge_dev *hdev, int link_ret) static int hclge_mac_phy_link_status_wait(struct hclge_dev *hdev, bool en, bool is_phy) { -#define HCLGE_LINK_STATUS_DOWN 0 -#define HCLGE_LINK_STATUS_UP 1 - int link_ret; link_ret = en ? HCLGE_LINK_STATUS_UP : HCLGE_LINK_STATUS_DOWN; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h index 46e6e0fef3ba..9bbdd4557c27 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h @@ -317,6 +317,9 @@ enum hclge_link_fail_code { HCLGE_LF_XSFP_ABSENT, }; +#define HCLGE_LINK_STATUS_DOWN 0 +#define HCLGE_LINK_STATUS_UP 1 + #define HCLGE_PG_NUM 4 #define HCLGE_SCH_MODE_SP 0 #define HCLGE_SCH_MODE_DWRR 1 -- cgit v1.2.3 From 3506b2f42dff66ea6814c3dfa1988bafb79e6f88 Mon Sep 17 00:00:00 2001 From: Helmut Grohne Date: Tue, 21 Jul 2020 13:07:39 +0200 Subject: net: dsa: microchip: call phy_remove_link_mode during probe When doing "ip link set dev ... up" for a ksz9477 backed link, ksz9477_phy_setup is called and it calls phy_remove_link_mode to remove 1000baseT HDX. During phy_remove_link_mode, phy_advertise_supported is called. Doing so reverts any previous change to advertised link modes e.g. using a udevd .link file. phy_remove_link_mode is not meant to be used while opening a link and should be called during phy probe when the link is not yet available to userspace. Therefore move the phy_remove_link_mode calls into ksz9477_switch_register. It indirectly calls dsa_register_switch, which creates the relevant struct phy_devices and we update the link modes right after that. At that time dev->features is already initialized by ksz9477_switch_detect. Remove phy_setup from ksz_dev_ops as no users remain. Link: https://lore.kernel.org/netdev/20200715192722.GD1256692@lunn.ch/ Fixes: 42fc6a4c613019 ("net: dsa: microchip: prepare PHY for proper advertisement") Signed-off-by: Helmut Grohne Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz9477.c | 42 +++++++++++++++++++--------------- drivers/net/dsa/microchip/ksz_common.c | 2 -- drivers/net/dsa/microchip/ksz_common.h | 2 -- 3 files changed, 23 insertions(+), 23 deletions(-) diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 8d15c3016024..4a9239b2c2e4 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -974,23 +974,6 @@ static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port, PORT_MIRROR_SNIFFER, false); } -static void ksz9477_phy_setup(struct ksz_device *dev, int port, - struct phy_device *phy) -{ - /* Only apply to port with PHY. */ - if (port >= dev->phy_port_cnt) - return; - - /* The MAC actually cannot run in 1000 half-duplex mode. */ - phy_remove_link_mode(phy, - ETHTOOL_LINK_MODE_1000baseT_Half_BIT); - - /* PHY does not support gigabit. */ - if (!(dev->features & GBIT_SUPPORT)) - phy_remove_link_mode(phy, - ETHTOOL_LINK_MODE_1000baseT_Full_BIT); -} - static bool ksz9477_get_gbit(struct ksz_device *dev, u8 data) { bool gbit; @@ -1603,7 +1586,6 @@ static const struct ksz_dev_ops ksz9477_dev_ops = { .get_port_addr = ksz9477_get_port_addr, .cfg_port_member = ksz9477_cfg_port_member, .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table, - .phy_setup = ksz9477_phy_setup, .port_setup = ksz9477_port_setup, .r_mib_cnt = ksz9477_r_mib_cnt, .r_mib_pkt = ksz9477_r_mib_pkt, @@ -1617,7 +1599,29 @@ static const struct ksz_dev_ops ksz9477_dev_ops = { int ksz9477_switch_register(struct ksz_device *dev) { - return ksz_switch_register(dev, &ksz9477_dev_ops); + int ret, i; + struct phy_device *phydev; + + ret = ksz_switch_register(dev, &ksz9477_dev_ops); + if (ret) + return ret; + + for (i = 0; i < dev->phy_port_cnt; ++i) { + if (!dsa_is_user_port(dev->ds, i)) + continue; + + phydev = dsa_to_port(dev->ds, i)->slave->phydev; + + /* The MAC actually cannot run in 1000 half-duplex mode. */ + phy_remove_link_mode(phydev, + ETHTOOL_LINK_MODE_1000baseT_Half_BIT); + + /* PHY does not support gigabit. */ + if (!(dev->features & GBIT_SUPPORT)) + phy_remove_link_mode(phydev, + ETHTOOL_LINK_MODE_1000baseT_Full_BIT); + } + return ret; } EXPORT_SYMBOL(ksz9477_switch_register); diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index fd1d6676ae4f..7b6c0dce7536 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -358,8 +358,6 @@ int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) /* setup slave port */ dev->dev_ops->port_setup(dev, port, false); - if (dev->dev_ops->phy_setup) - dev->dev_ops->phy_setup(dev, port, phy); /* port_stp_state_set() will be called after to enable the port so * there is no need to do anything. diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index f2c9bb68fd33..7d11dd32ec0d 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -119,8 +119,6 @@ struct ksz_dev_ops { u32 (*get_port_addr)(int port, int offset); void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member); void (*flush_dyn_mac_table)(struct ksz_device *dev, int port); - void (*phy_setup)(struct ksz_device *dev, int port, - struct phy_device *phy); void (*port_cleanup)(struct ksz_device *dev, int port); void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port); void (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val); -- cgit v1.2.3 From 2c9d8e01f0c6017317eee7638496173d4a64e6bc Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Tue, 21 Jul 2020 14:51:50 +0000 Subject: netdevsim: fix unbalaced locking in nsim_create() In the nsim_create(), rtnl_lock() is called before nsim_bpf_init(). If nsim_bpf_init() is failed, rtnl_unlock() should be called, but it isn't called. So, unbalanced locking would occur. Fixes: e05b2d141fef ("netdevsim: move netdev creation/destruction to dev probe") Signed-off-by: Taehee Yoo Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/netdevsim/netdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/netdevsim/netdev.c b/drivers/net/netdevsim/netdev.c index 2908e0a0d6e1..23950e7a0f81 100644 --- a/drivers/net/netdevsim/netdev.c +++ b/drivers/net/netdevsim/netdev.c @@ -302,7 +302,7 @@ nsim_create(struct nsim_dev *nsim_dev, struct nsim_dev_port *nsim_dev_port) rtnl_lock(); err = nsim_bpf_init(ns); if (err) - goto err_free_netdev; + goto err_rtnl_unlock; nsim_ipsec_init(ns); @@ -316,8 +316,8 @@ nsim_create(struct nsim_dev *nsim_dev, struct nsim_dev_port *nsim_dev_port) err_ipsec_teardown: nsim_ipsec_teardown(ns); nsim_bpf_uninit(ns); +err_rtnl_unlock: rtnl_unlock(); -err_free_netdev: free_netdev(dev); return ERR_PTR(err); } -- cgit v1.2.3 From 1ea999039fe7c7953da2fbb7ca7c3ef00064d328 Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 21 Jul 2020 17:41:42 +0300 Subject: qed: suppress "don't support RoCE & iWARP" flooding on HW init Change the verbosity of the "don't support RoCE & iWARP simultaneously" warning to debug level to stop flooding on driver/hardware initialization: [ 4.783230] qede 01:00.00: Storm FW 8.37.7.0, Management FW 8.52.9.0 [MBI 15.10.6] [eth0] [ 4.810020] [qed_rdma_set_pf_params:2076()]Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only [ 4.861186] qede 01:00.01: Storm FW 8.37.7.0, Management FW 8.52.9.0 [MBI 15.10.6] [eth1] [ 4.893311] [qed_rdma_set_pf_params:2076()]Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only [ 5.181713] qede a1:00.00: Storm FW 8.37.7.0, Management FW 8.52.9.0 [MBI 15.10.6] [eth2] [ 5.224740] [qed_rdma_set_pf_params:2076()]Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only [ 5.276449] qede a1:00.01: Storm FW 8.37.7.0, Management FW 8.52.9.0 [MBI 15.10.6] [eth3] [ 5.318671] [qed_rdma_set_pf_params:2076()]Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only [ 5.369548] qede a1:00.02: Storm FW 8.37.7.0, Management FW 8.52.9.0 [MBI 15.10.6] [eth4] [ 5.411645] [qed_rdma_set_pf_params:2076()]Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only Fixes: e0a8f9de16fc ("qed: Add iWARP enablement support") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_cxt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c index 08ba9d54ab63..d13ec88313c3 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c +++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c @@ -2008,8 +2008,8 @@ static void qed_rdma_set_pf_params(struct qed_hwfn *p_hwfn, enum protocol_type proto; if (p_hwfn->mcp_info->func_info.protocol == QED_PCI_ETH_RDMA) { - DP_NOTICE(p_hwfn, - "Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only\n"); + DP_VERBOSE(p_hwfn, QED_MSG_SP, + "Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only\n"); p_hwfn->hw_info.personality = QED_PCI_ETH_ROCE; } -- cgit v1.2.3 From eb61c2d69903e977ffa2b80b1da9d1f758cf228d Mon Sep 17 00:00:00 2001 From: Alexander Lobakin Date: Tue, 21 Jul 2020 17:41:43 +0300 Subject: qed: suppress false-positives interrupt error messages on HW init It was found that qed_pglueb_rbc_attn_handler() can produce a lot of false-positive error detections on driver load/reload (especially after crashes/recoveries) and spam the kernel log: [ 4.958275] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d00ff0 [ 2079.146764] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0 [ 2116.374631] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0 [ 2135.250564] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0 [...] Reduce the logging level of two false-positive prone error messages from notice to verbose on initialization (only) to not mix it with real error attentions while debugging. Fixes: 666db4862f2d ("qed: Revise load sequence to avoid PCI errors") Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_int.c | 50 ++++++++++++++++++------------- drivers/net/ethernet/qlogic/qed/qed_int.h | 4 +-- 3 files changed, 32 insertions(+), 24 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 9c26fde663b3..dbdac983ccde 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -3102,7 +3102,7 @@ int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params) } /* Log and clear previous pglue_b errors if such exist */ - qed_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_main_ptt); + qed_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_main_ptt, true); /* Enable the PF's internal FID_enable in the PXP */ rc = qed_pglueb_set_pfid_enable(p_hwfn, p_hwfn->p_main_ptt, diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c index 7e13a9d9b89c..5eec1fc6229d 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_int.c +++ b/drivers/net/ethernet/qlogic/qed/qed_int.c @@ -257,9 +257,10 @@ out: #define PGLUE_ATTENTION_ZLR_VALID (1 << 25) #define PGLUE_ATTENTION_ILT_VALID (1 << 23) -int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, - struct qed_ptt *p_ptt) +int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, + bool hw_init) { + char msg[256]; u32 tmp; tmp = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_TX_ERR_WR_DETAILS2); @@ -273,22 +274,23 @@ int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, details = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_TX_ERR_WR_DETAILS); - DP_NOTICE(p_hwfn, - "Illegal write by chip to [%08x:%08x] blocked.\n" - "Details: %08x [PFID %02x, VFID %02x, VF_VALID %02x]\n" - "Details2 %08x [Was_error %02x BME deassert %02x FID_enable deassert %02x]\n", - addr_hi, addr_lo, details, - (u8)GET_FIELD(details, PGLUE_ATTENTION_DETAILS_PFID), - (u8)GET_FIELD(details, PGLUE_ATTENTION_DETAILS_VFID), - GET_FIELD(details, - PGLUE_ATTENTION_DETAILS_VF_VALID) ? 1 : 0, - tmp, - GET_FIELD(tmp, - PGLUE_ATTENTION_DETAILS2_WAS_ERR) ? 1 : 0, - GET_FIELD(tmp, - PGLUE_ATTENTION_DETAILS2_BME) ? 1 : 0, - GET_FIELD(tmp, - PGLUE_ATTENTION_DETAILS2_FID_EN) ? 1 : 0); + snprintf(msg, sizeof(msg), + "Illegal write by chip to [%08x:%08x] blocked.\n" + "Details: %08x [PFID %02x, VFID %02x, VF_VALID %02x]\n" + "Details2 %08x [Was_error %02x BME deassert %02x FID_enable deassert %02x]", + addr_hi, addr_lo, details, + (u8)GET_FIELD(details, PGLUE_ATTENTION_DETAILS_PFID), + (u8)GET_FIELD(details, PGLUE_ATTENTION_DETAILS_VFID), + !!GET_FIELD(details, PGLUE_ATTENTION_DETAILS_VF_VALID), + tmp, + !!GET_FIELD(tmp, PGLUE_ATTENTION_DETAILS2_WAS_ERR), + !!GET_FIELD(tmp, PGLUE_ATTENTION_DETAILS2_BME), + !!GET_FIELD(tmp, PGLUE_ATTENTION_DETAILS2_FID_EN)); + + if (hw_init) + DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, "%s\n", msg); + else + DP_NOTICE(p_hwfn, "%s\n", msg); } tmp = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_TX_ERR_RD_DETAILS2); @@ -321,8 +323,14 @@ int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, } tmp = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_TX_ERR_WR_DETAILS_ICPL); - if (tmp & PGLUE_ATTENTION_ICPL_VALID) - DP_NOTICE(p_hwfn, "ICPL error - %08x\n", tmp); + if (tmp & PGLUE_ATTENTION_ICPL_VALID) { + snprintf(msg, sizeof(msg), "ICPL error - %08x", tmp); + + if (hw_init) + DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, "%s\n", msg); + else + DP_NOTICE(p_hwfn, "%s\n", msg); + } tmp = qed_rd(p_hwfn, p_ptt, PGLUE_B_REG_MASTER_ZLR_ERR_DETAILS); if (tmp & PGLUE_ATTENTION_ZLR_VALID) { @@ -361,7 +369,7 @@ int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, static int qed_pglueb_rbc_attn_cb(struct qed_hwfn *p_hwfn) { - return qed_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_dpc_ptt); + return qed_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_dpc_ptt, false); } static int qed_fw_assertion(struct qed_hwfn *p_hwfn) diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.h b/drivers/net/ethernet/qlogic/qed/qed_int.h index e09db3386367..110169e90121 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_int.h +++ b/drivers/net/ethernet/qlogic/qed/qed_int.h @@ -442,7 +442,7 @@ int qed_int_set_timer_res(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, #define QED_MAPPING_MEMORY_SIZE(dev) (NUM_OF_SBS(dev)) -int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, - struct qed_ptt *p_ptt); +int qed_pglueb_rbc_attn_handler(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, + bool hw_init); #endif -- cgit v1.2.3 From 5fff09bc141570cd15c118b097b17dec832b517f Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Tue, 21 Jul 2020 15:00:35 -0700 Subject: xtensa: fix access check in csum_and_copy_from_user Commit d341659f470b ("xtensa: switch to providing csum_and_copy_from_user()") introduced access check, but incorrectly tested dst instead of src. Fix access_ok argument in csum_and_copy_from_user. Cc: Al Viro Fixes: d341659f470b ("xtensa: switch to providing csum_and_copy_from_user()") Signed-off-by: Max Filippov Signed-off-by: Al Viro --- arch/xtensa/include/asm/checksum.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h index d8292cc9ebdf..243a5fe79d3c 100644 --- a/arch/xtensa/include/asm/checksum.h +++ b/arch/xtensa/include/asm/checksum.h @@ -57,7 +57,7 @@ static inline __wsum csum_and_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr) { - if (access_ok(dst, len)) + if (access_ok(src, len)) return csum_partial_copy_generic((__force const void *)src, dst, len, sum, err_ptr, NULL); if (len) -- cgit v1.2.3 From b346c0c85892cb8c53e8715734f71ba5bbec3387 Mon Sep 17 00:00:00 2001 From: Paolo Pisati Date: Tue, 21 Jul 2020 18:17:10 +0200 Subject: selftest: txtimestamp: fix net ns entry logic According to 'man 8 ip-netns', if `ip netns identify` returns an empty string, there's no net namespace associated with current PID: fix the net ns entrance logic. Signed-off-by: Paolo Pisati Acked-by: Willem de Bruijn Signed-off-by: David S. Miller --- tools/testing/selftests/net/txtimestamp.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/txtimestamp.sh b/tools/testing/selftests/net/txtimestamp.sh index eea6f5193693..31637769f59f 100755 --- a/tools/testing/selftests/net/txtimestamp.sh +++ b/tools/testing/selftests/net/txtimestamp.sh @@ -75,7 +75,7 @@ main() { fi } -if [[ "$(ip netns identify)" == "root" ]]; then +if [[ -z "$(ip netns identify)" ]]; then ./in_netns.sh $0 $@ else main $@ -- cgit v1.2.3 From 8210e344ccb798c672ab237b1a4f241bda08909b Mon Sep 17 00:00:00 2001 From: guodeqing Date: Thu, 16 Jul 2020 16:12:08 +0800 Subject: ipvs: fix the connection sync failed in some cases The sync_thread_backup only checks sk_receive_queue is empty or not, there is a situation which cannot sync the connection entries when sk_receive_queue is empty and sk_rmem_alloc is larger than sk_rcvbuf, the sync packets are dropped in __udp_enqueue_schedule_skb, this is because the packets in reader_queue is not read, so the rmem is not reclaimed. Here I add the check of whether the reader_queue of the udp sock is empty or not to solve this problem. Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception") Reported-by: zhouxudong Signed-off-by: guodeqing Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_sync.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c index 605e0f68f8bd..2b8abbfe018c 100644 --- a/net/netfilter/ipvs/ip_vs_sync.c +++ b/net/netfilter/ipvs/ip_vs_sync.c @@ -1717,6 +1717,8 @@ static int sync_thread_backup(void *data) { struct ip_vs_sync_thread_data *tinfo = data; struct netns_ipvs *ipvs = tinfo->ipvs; + struct sock *sk = tinfo->sock->sk; + struct udp_sock *up = udp_sk(sk); int len; pr_info("sync thread started: state = BACKUP, mcast_ifn = %s, " @@ -1724,12 +1726,14 @@ static int sync_thread_backup(void *data) ipvs->bcfg.mcast_ifn, ipvs->bcfg.syncid, tinfo->id); while (!kthread_should_stop()) { - wait_event_interruptible(*sk_sleep(tinfo->sock->sk), - !skb_queue_empty(&tinfo->sock->sk->sk_receive_queue) - || kthread_should_stop()); + wait_event_interruptible(*sk_sleep(sk), + !skb_queue_empty_lockless(&sk->sk_receive_queue) || + !skb_queue_empty_lockless(&up->reader_queue) || + kthread_should_stop()); /* do we have data now? */ - while (!skb_queue_empty(&(tinfo->sock->sk->sk_receive_queue))) { + while (!skb_queue_empty_lockless(&sk->sk_receive_queue) || + !skb_queue_empty_lockless(&up->reader_queue)) { len = ip_vs_receive(tinfo->sock, tinfo->buf, ipvs->bcfg.sync_maxlen); if (len <= 0) { -- cgit v1.2.3 From 8fdcabeac39824fe67480fd9508d80161c541854 Mon Sep 17 00:00:00 2001 From: Xie He Date: Thu, 16 Jul 2020 16:44:33 -0700 Subject: drivers/net/wan/x25_asy: Fix to make it work This driver is not working because of problems of its receiving code. This patch fixes it to make it work. When the driver receives an LAPB frame, it should first pass the frame to the LAPB module to process. After processing, the LAPB module passes the data (the packet) back to the driver, the driver should then add a one-byte pseudo header and pass the data to upper layers. The changes to the "x25_asy_bump" function and the "x25_asy_data_indication" function are to correctly implement this procedure. Also, the "x25_asy_unesc" function ignores any frame that is shorter than 3 bytes. However the shortest frames are 2-byte long. So we need to change it to allow 2-byte frames to pass. Cc: Eric Dumazet Cc: Martin Schiller Signed-off-by: Xie He Reviewed-by: Martin Schiller Signed-off-by: David S. Miller --- drivers/net/wan/x25_asy.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index 69773d228ec1..84640a0c13f3 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -183,7 +183,7 @@ static inline void x25_asy_unlock(struct x25_asy *sl) netif_wake_queue(sl->dev); } -/* Send one completely decapsulated IP datagram to the IP layer. */ +/* Send an LAPB frame to the LAPB module to process. */ static void x25_asy_bump(struct x25_asy *sl) { @@ -195,13 +195,12 @@ static void x25_asy_bump(struct x25_asy *sl) count = sl->rcount; dev->stats.rx_bytes += count; - skb = dev_alloc_skb(count+1); + skb = dev_alloc_skb(count); if (skb == NULL) { netdev_warn(sl->dev, "memory squeeze, dropping packet\n"); dev->stats.rx_dropped++; return; } - skb_push(skb, 1); /* LAPB internal control */ skb_put_data(skb, sl->rbuff, count); skb->protocol = x25_type_trans(skb, sl->dev); err = lapb_data_received(skb->dev, skb); @@ -209,7 +208,6 @@ static void x25_asy_bump(struct x25_asy *sl) kfree_skb(skb); printk(KERN_DEBUG "x25_asy: data received err - %d\n", err); } else { - netif_rx(skb); dev->stats.rx_packets++; } } @@ -356,12 +354,21 @@ static netdev_tx_t x25_asy_xmit(struct sk_buff *skb, */ /* - * Called when I frame data arrives. We did the work above - throw it - * at the net layer. + * Called when I frame data arrive. We add a pseudo header for upper + * layers and pass it to upper layers. */ static int x25_asy_data_indication(struct net_device *dev, struct sk_buff *skb) { + if (skb_cow(skb, 1)) { + kfree_skb(skb); + return NET_RX_DROP; + } + skb_push(skb, 1); + skb->data[0] = X25_IFACE_DATA; + + skb->protocol = x25_type_trans(skb, dev); + return netif_rx(skb); } @@ -657,7 +664,7 @@ static void x25_asy_unesc(struct x25_asy *sl, unsigned char s) switch (s) { case X25_END: if (!test_and_clear_bit(SLF_ERROR, &sl->flags) && - sl->rcount > 2) + sl->rcount >= 2) x25_asy_bump(sl); clear_bit(SLF_ESCAPE, &sl->flags); sl->rcount = 0; -- cgit v1.2.3 From 1264d7fa3a64d8bea7aebb77253f917947ffda25 Mon Sep 17 00:00:00 2001 From: Wang Hai Date: Fri, 17 Jul 2020 10:50:49 +0800 Subject: net: ethernet: ave: Fix error returns in ave_init When regmap_update_bits failed in ave_init(), calls of the functions reset_control_assert() and clk_disable_unprepare() were missed. Add goto out_reset_assert to do this. Fixes: 57878f2f4697 ("net: ethernet: ave: add support for phy-mode setting of system controller") Reported-by: Hulk Robot Signed-off-by: Wang Hai Reviewed-by: Kunihiko Hayashi Signed-off-by: David S. Miller --- drivers/net/ethernet/socionext/sni_ave.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c index f2638446b62e..81b554dd7221 100644 --- a/drivers/net/ethernet/socionext/sni_ave.c +++ b/drivers/net/ethernet/socionext/sni_ave.c @@ -1191,7 +1191,7 @@ static int ave_init(struct net_device *ndev) ret = regmap_update_bits(priv->regmap, SG_ETPINMODE, priv->pinmode_mask, priv->pinmode_val); if (ret) - return ret; + goto out_reset_assert; ave_global_reset(ndev); -- cgit v1.2.3 From 2c4dc31486034fa8929a571e7a59677e92b5d6c5 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Fri, 17 Jul 2020 15:19:32 +0300 Subject: net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload Currently drive supports taprio offload which is a tc feature offloaded to cpsw hardware. So driver has to set the hw feature flag, NETIF_F_HW_TC in the net device to be compliant. This patch adds the flag. Fixes: 8127224c2708 ("ethernet: ti: am65-cpsw-qos: add TAPRIO offload support") Signed-off-by: Murali Karicheri Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/am65-cpsw-nuss.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c index 1492648247d9..6d778bc3d012 100644 --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c @@ -1850,7 +1850,8 @@ static int am65_cpsw_nuss_init_ndev_2g(struct am65_cpsw_common *common) port->ndev->max_mtu = AM65_CPSW_MAX_PACKET_SIZE; port->ndev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM | - NETIF_F_HW_CSUM; + NETIF_F_HW_CSUM | + NETIF_F_HW_TC; port->ndev->features = port->ndev->hw_features | NETIF_F_HW_VLAN_CTAG_FILTER; port->ndev->vlan_features |= NETIF_F_SG; -- cgit v1.2.3 From de2b41be8fcccb2f5b6c480d35df590476344201 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 21 Jul 2020 11:34:48 +0200 Subject: x86, vmlinux.lds: Page-align end of ..page_aligned sections On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is page-aligned, but the end of the .bss..page_aligned section is not guaranteed to be page-aligned. As a result, objects from other .bss sections may end up on the same 4k page as the idt_table, and will accidentially get mapped read-only during boot, causing unexpected page-faults when the kernel writes to them. This could be worked around by making the objects in the page aligned sections page sized, but that's wrong. Explicit sections which store only page aligned objects have an implicit guarantee that the object is alone in the page in which it is placed. That works for all objects except the last one. That's inconsistent. Enforcing page sized objects for these sections would wreckage memory sanitizers, because the object becomes artificially larger than it should be and out of bound access becomes legit. Align the end of the .bss..page_aligned and .data..page_aligned section on page-size so all objects places in these sections are guaranteed to have their own page. [ tglx: Amended changelog ] Signed-off-by: Joerg Roedel Signed-off-by: Thomas Gleixner Reviewed-by: Kees Cook Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200721093448.10417-1-joro@8bytes.org --- arch/x86/kernel/vmlinux.lds.S | 1 + include/asm-generic/vmlinux.lds.h | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 3bfc8dd8a43d..9a03e5b23135 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -358,6 +358,7 @@ SECTIONS .bss : AT(ADDR(.bss) - LOAD_OFFSET) { __bss_start = .; *(.bss..page_aligned) + . = ALIGN(PAGE_SIZE); *(BSS_MAIN) BSS_DECRYPTED . = ALIGN(PAGE_SIZE); diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index db600ef218d7..052e0f05a984 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -341,7 +341,8 @@ #define PAGE_ALIGNED_DATA(page_align) \ . = ALIGN(page_align); \ - *(.data..page_aligned) + *(.data..page_aligned) \ + . = ALIGN(page_align); #define READ_MOSTLY_DATA(align) \ . = ALIGN(align); \ @@ -737,7 +738,9 @@ . = ALIGN(bss_align); \ .bss : AT(ADDR(.bss) - LOAD_OFFSET) { \ BSS_FIRST_SECTIONS \ + . = ALIGN(PAGE_SIZE); \ *(.bss..page_aligned) \ + . = ALIGN(PAGE_SIZE); \ *(.dynbss) \ *(BSS_MAIN) \ *(COMMON) \ -- cgit v1.2.3 From d136122f58458479fd8926020ba2937de61d7f65 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 20 Jul 2020 17:20:21 +0200 Subject: sched: Fix race against ptrace_freeze_trace() There is apparently one site that violates the rule that only current and ttwu() will modify task->state, namely ptrace_{,un}freeze_traced() will change task->state for a remote task. Oleg explains: "TASK_TRACED/TASK_STOPPED was always protected by siglock. In particular, ttwu(__TASK_TRACED) must be always called with siglock held. That is why ptrace_freeze_traced() assumes it can safely do s/TASK_TRACED/__TASK_TRACED/ under spin_lock(siglock)." This breaks the ordering scheme introduced by commit: dbfb089d360b ("sched: Fix loadavg accounting race") Specifically, the reload not matching no longer implies we don't have to block. Simply things by noting that what we need is a LOAD->STORE ordering and this can be provided by a control dependency. So replace: prev_state = prev->state; raw_spin_lock(&rq->lock); smp_mb__after_spinlock(); /* SMP-MB */ if (... && prev_state && prev_state == prev->state) deactivate_task(); with: prev_state = prev->state; if (... && prev_state) /* CTRL-DEP */ deactivate_task(); Since that already implies the 'prev->state' load must be complete before allowing the 'prev->on_rq = 0' store to become visible. Fixes: dbfb089d360b ("sched: Fix loadavg accounting race") Reported-by: Jiri Slaby Signed-off-by: Peter Zijlstra (Intel) Acked-by: Oleg Nesterov Tested-by: Paul Gortmaker Tested-by: Christian Brauner --- kernel/sched/core.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index e15543cb8481..5dece9b34e25 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4119,9 +4119,6 @@ static void __sched notrace __schedule(bool preempt) local_irq_disable(); rcu_note_context_switch(preempt); - /* See deactivate_task() below. */ - prev_state = prev->state; - /* * Make sure that signal_pending_state()->signal_pending() below * can't be reordered with __set_current_state(TASK_INTERRUPTIBLE) @@ -4145,11 +4142,16 @@ static void __sched notrace __schedule(bool preempt) update_rq_clock(rq); switch_count = &prev->nivcsw; + /* - * We must re-load prev->state in case ttwu_remote() changed it - * before we acquired rq->lock. + * We must load prev->state once (task_struct::state is volatile), such + * that: + * + * - we form a control dependency vs deactivate_task() below. + * - ptrace_{,un}freeze_traced() can change ->state underneath us. */ - if (!preempt && prev_state && prev_state == prev->state) { + prev_state = prev->state; + if (!preempt && prev_state) { if (signal_pending_state(prev_state, prev)) { prev->state = TASK_RUNNING; } else { @@ -4163,10 +4165,12 @@ static void __sched notrace __schedule(bool preempt) /* * __schedule() ttwu() - * prev_state = prev->state; if (READ_ONCE(p->on_rq) && ...) - * LOCK rq->lock goto out; - * smp_mb__after_spinlock(); smp_acquire__after_ctrl_dep(); - * p->on_rq = 0; p->state = TASK_WAKING; + * prev_state = prev->state; if (p->on_rq && ...) + * if (prev_state) goto out; + * p->on_rq = 0; smp_acquire__after_ctrl_dep(); + * p->state = TASK_WAKING + * + * Where __schedule() and ttwu() have matching control dependencies. * * After this, schedule() must not care about p->state any more. */ -- cgit v1.2.3 From 0db9254d6b896b587759e2c844c277fb1a6da5b9 Mon Sep 17 00:00:00 2001 From: Raviteja Narayanam Date: Fri, 3 Jul 2020 19:25:49 +0530 Subject: Revert "i2c: cadence: Fix the hold bit setting" This reverts commit d358def706880defa4c9e87381c5bf086a97d5f9. There are two issues with "i2c: cadence: Fix the hold bit setting" commit. 1. In case of combined message request from user space, when the HOLD bit is cleared in cdns_i2c_mrecv function, a STOP condition is sent on the bus even before the last message is started. This is because when the HOLD bit is cleared, the FIFOS are empty and there is no pending transfer. The STOP condition should occur only after the last message is completed. 2. The code added by the commit is redundant. Driver is handling the setting/clearing of HOLD bit in right way before the commit. The setting of HOLD bit based on 'bus_hold_flag' is taken care in cdns_i2c_master_xfer function even before cdns_i2c_msend/cdns_i2c_recv functions. The clearing of HOLD bit is taken care at the end of cdns_i2c_msend and cdns_i2c_recv functions based on bus_hold_flag and byte count. Since clearing of HOLD bit is done after the slave address is written to the register (writing to address register triggers the message transfer), it is ensured that STOP condition occurs at the right time after completion of the pending transfer (last message). Signed-off-by: Raviteja Narayanam Acked-by: Michal Simek Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-cadence.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 4b72398af505..e06960207ada 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -594,10 +594,8 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id) * Check for the message size against FIFO depth and set the * 'hold bus' bit if it is greater than FIFO depth. */ - if ((id->recv_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag) + if (id->recv_count > CDNS_I2C_FIFO_DEPTH) ctrl_reg |= CDNS_I2C_CR_HOLD; - else - ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD; cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET); @@ -654,11 +652,8 @@ static void cdns_i2c_msend(struct cdns_i2c *id) * Check for the message size against FIFO depth and set the * 'hold bus' bit if it is greater than FIFO depth. */ - if ((id->send_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag) + if (id->send_count > CDNS_I2C_FIFO_DEPTH) ctrl_reg |= CDNS_I2C_CR_HOLD; - else - ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD; - cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET); /* Clear the interrupts in interrupt status register. */ -- cgit v1.2.3 From 12d4d9ec5eeecd712c73772e422b6d082e66b046 Mon Sep 17 00:00:00 2001 From: Raviteja Narayanam Date: Fri, 3 Jul 2020 19:26:12 +0530 Subject: i2c: cadence: Clear HOLD bit at correct time in Rx path There are few issues on Zynq SOC observed in the stress tests causing timeout errors. Even though all the data is received, timeout error is thrown. This is due to an IP bug in which the COMP bit in ISR is not set at end of transfer and completion interrupt is not generated. This bug is seen on Zynq platforms when the following condition occurs: Master read & HOLD bit set & Transfer size register reaches '0'. One workaround is to clear the HOLD bit before the transfer size register reaches '0'. The current implementation checks for this at the start of the loop and also only for less than FIFO DEPTH case (ignoring the equal to case). So clear the HOLD bit when the data yet to receive is less than or equal to the FIFO DEPTH. This avoids the IP bug condition. Signed-off-by: Raviteja Narayanam Acked-by: Michal Simek Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-cadence.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index e06960207ada..e4b7f2a951ad 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -421,20 +421,21 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr) /* Read data if receive data valid is set */ while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_RXDV) { - /* - * Clear hold bit that was set for FIFO control if - * RX data left is less than FIFO depth, unless - * repeated start is selected. - */ - if ((id->recv_count < CDNS_I2C_FIFO_DEPTH) && - !id->bus_hold_flag) - cdns_i2c_clear_bus_hold(id); - if (id->recv_count > 0) { *(id->p_recv_buf)++ = cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET); id->recv_count--; id->curr_recv_count--; + + /* + * Clear hold bit that was set for FIFO control + * if RX data left is less than or equal to + * FIFO DEPTH unless repeated start is selected + */ + if (id->recv_count <= CDNS_I2C_FIFO_DEPTH && + !id->bus_hold_flag) + cdns_i2c_clear_bus_hold(id); + } else { dev_err(id->adap.dev.parent, "xfer_size reg rollover. xfer aborted!\n"); -- cgit v1.2.3 From aca7ed091117d9b4ce499855c383119afb2819a2 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 17 Jul 2020 16:38:15 -0700 Subject: i2c: drop duplicated word in the header file Drop the doubled word "be" in a comment. Signed-off-by: Randy Dunlap Signed-off-by: Wolfram Sang --- include/linux/i2c.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index b8b8963f8bb9..ee328cf80bd9 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -56,7 +56,7 @@ struct property_entry; * on a bus (or read from them). Apart from two basic transfer functions to * transmit one message at a time, a more complex version can be used to * transmit an arbitrary number of messages without interruption. - * @count must be be less than 64k since msg.len is u16. + * @count must be less than 64k since msg.len is u16. */ int i2c_transfer_buffer_flags(const struct i2c_client *client, char *buf, int count, u16 flags); -- cgit v1.2.3 From 436d17675be1c090f08d4eddf1d7193cacf0e9be Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Thu, 9 Jul 2020 10:42:33 +0200 Subject: MAINTAINERS: i2c: at91: handover maintenance to Codrin Ciubotariu My colleague Codrin Ciubotariu, now, maintains this driver internally. Then I handover the mainline maintenance to him. Signed-off-by: Ludovic Desroches Signed-off-by: Wolfram Sang --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index d53db30d1365..2ec6db685992 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11240,7 +11240,7 @@ S: Maintained F: drivers/crypto/atmel-ecc.* MICROCHIP I2C DRIVER -M: Ludovic Desroches +M: Codrin Ciubotariu L: linux-i2c@vger.kernel.org S: Supported F: drivers/i2c/busses/i2c-at91-*.c -- cgit v1.2.3 From 0cfa112b33aba4473b00151c75b87818a835702a Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Tue, 21 Jul 2020 15:04:30 +0200 Subject: MAINTAINERS: add Matthew for s390 IOMMU Acked-By: Matthew Rosato Signed-off-by: Gerald Schaefer Signed-off-by: Heiko Carstens --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index d53db30d1365..df5fc5625ec8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14862,6 +14862,7 @@ F: drivers/s390/block/dasd* F: include/linux/dasd_mod.h S390 IOMMU (PCI) +M: Matthew Rosato M: Gerald Schaefer L: linux-s390@vger.kernel.org S: Supported -- cgit v1.2.3 From 1014a2f8d76b05e0f228dd097ac1a249c5934232 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 20 Jul 2020 08:52:17 -0700 Subject: iommu/qcom: Use domain rather than dev as tlb cookie The device may be torn down, but the domain should still be valid. Lets use that as the tlb flush ops cookie. Fixes a problem reported in [1] [1] https://lkml.org/lkml/2020/7/20/104 Reported-by: Naresh Kamboju Signed-off-by: Rob Clark Tested-by: Naresh Kamboju Fixes: 09b5dfff9ad6 ("iommu/qcom: Use accessor functions for iommu private data") Link: https://lore.kernel.org/r/20200720155217.274994-1-robdclark@gmail.com Signed-off-by: Joerg Roedel --- drivers/iommu/qcom_iommu.c | 37 +++++++++++++++++-------------------- 1 file changed, 17 insertions(+), 20 deletions(-) diff --git a/drivers/iommu/qcom_iommu.c b/drivers/iommu/qcom_iommu.c index c3e1fbd1988c..d176df569af8 100644 --- a/drivers/iommu/qcom_iommu.c +++ b/drivers/iommu/qcom_iommu.c @@ -65,6 +65,7 @@ struct qcom_iommu_domain { struct mutex init_mutex; /* Protects iommu pointer */ struct iommu_domain domain; struct qcom_iommu_dev *iommu; + struct iommu_fwspec *fwspec; }; static struct qcom_iommu_domain *to_qcom_iommu_domain(struct iommu_domain *dom) @@ -84,9 +85,9 @@ static struct qcom_iommu_dev * to_iommu(struct device *dev) return dev_iommu_priv_get(dev); } -static struct qcom_iommu_ctx * to_ctx(struct device *dev, unsigned asid) +static struct qcom_iommu_ctx * to_ctx(struct qcom_iommu_domain *d, unsigned asid) { - struct qcom_iommu_dev *qcom_iommu = to_iommu(dev); + struct qcom_iommu_dev *qcom_iommu = d->iommu; if (!qcom_iommu) return NULL; return qcom_iommu->ctxs[asid - 1]; @@ -118,14 +119,12 @@ iommu_readq(struct qcom_iommu_ctx *ctx, unsigned reg) static void qcom_iommu_tlb_sync(void *cookie) { - struct iommu_fwspec *fwspec; - struct device *dev = cookie; + struct qcom_iommu_domain *qcom_domain = cookie; + struct iommu_fwspec *fwspec = qcom_domain->fwspec; unsigned i; - fwspec = dev_iommu_fwspec_get(dev); - for (i = 0; i < fwspec->num_ids; i++) { - struct qcom_iommu_ctx *ctx = to_ctx(dev, fwspec->ids[i]); + struct qcom_iommu_ctx *ctx = to_ctx(qcom_domain, fwspec->ids[i]); unsigned int val, ret; iommu_writel(ctx, ARM_SMMU_CB_TLBSYNC, 0); @@ -139,14 +138,12 @@ static void qcom_iommu_tlb_sync(void *cookie) static void qcom_iommu_tlb_inv_context(void *cookie) { - struct device *dev = cookie; - struct iommu_fwspec *fwspec; + struct qcom_iommu_domain *qcom_domain = cookie; + struct iommu_fwspec *fwspec = qcom_domain->fwspec; unsigned i; - fwspec = dev_iommu_fwspec_get(dev); - for (i = 0; i < fwspec->num_ids; i++) { - struct qcom_iommu_ctx *ctx = to_ctx(dev, fwspec->ids[i]); + struct qcom_iommu_ctx *ctx = to_ctx(qcom_domain, fwspec->ids[i]); iommu_writel(ctx, ARM_SMMU_CB_S1_TLBIASID, ctx->asid); } @@ -156,16 +153,14 @@ static void qcom_iommu_tlb_inv_context(void *cookie) static void qcom_iommu_tlb_inv_range_nosync(unsigned long iova, size_t size, size_t granule, bool leaf, void *cookie) { - struct device *dev = cookie; - struct iommu_fwspec *fwspec; + struct qcom_iommu_domain *qcom_domain = cookie; + struct iommu_fwspec *fwspec = qcom_domain->fwspec; unsigned i, reg; reg = leaf ? ARM_SMMU_CB_S1_TLBIVAL : ARM_SMMU_CB_S1_TLBIVA; - fwspec = dev_iommu_fwspec_get(dev); - for (i = 0; i < fwspec->num_ids; i++) { - struct qcom_iommu_ctx *ctx = to_ctx(dev, fwspec->ids[i]); + struct qcom_iommu_ctx *ctx = to_ctx(qcom_domain, fwspec->ids[i]); size_t s = size; iova = (iova >> 12) << 12; @@ -256,7 +251,9 @@ static int qcom_iommu_init_domain(struct iommu_domain *domain, }; qcom_domain->iommu = qcom_iommu; - pgtbl_ops = alloc_io_pgtable_ops(ARM_32_LPAE_S1, &pgtbl_cfg, dev); + qcom_domain->fwspec = fwspec; + + pgtbl_ops = alloc_io_pgtable_ops(ARM_32_LPAE_S1, &pgtbl_cfg, qcom_domain); if (!pgtbl_ops) { dev_err(qcom_iommu->dev, "failed to allocate pagetable ops\n"); ret = -ENOMEM; @@ -269,7 +266,7 @@ static int qcom_iommu_init_domain(struct iommu_domain *domain, domain->geometry.force_aperture = true; for (i = 0; i < fwspec->num_ids; i++) { - struct qcom_iommu_ctx *ctx = to_ctx(dev, fwspec->ids[i]); + struct qcom_iommu_ctx *ctx = to_ctx(qcom_domain, fwspec->ids[i]); if (!ctx->secure_init) { ret = qcom_scm_restore_sec_cfg(qcom_iommu->sec_id, ctx->asid); @@ -419,7 +416,7 @@ static void qcom_iommu_detach_dev(struct iommu_domain *domain, struct device *de pm_runtime_get_sync(qcom_iommu->dev); for (i = 0; i < fwspec->num_ids; i++) { - struct qcom_iommu_ctx *ctx = to_ctx(dev, fwspec->ids[i]); + struct qcom_iommu_ctx *ctx = to_ctx(qcom_domain, fwspec->ids[i]); /* Disable the context bank: */ iommu_writel(ctx, ARM_SMMU_CB_SCTLR, 0); -- cgit v1.2.3 From 62ca18a0896f5590806e6aee7bce39f130a2d9d5 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 1 Jul 2020 15:53:15 -0500 Subject: virtio-mmio: Reject invalid IRQ 0 command line argument The "virtio_mmio.device=" command line argument allows a user to specify the size, address, and IRQ of a virtio device. Previously the only requirement for the IRQ was that it be an unsigned integer. Zero is an unsigned integer but an invalid IRQ number, and after a85a6c86c25be ("driver core: platform: Clarify that IRQ 0 is invalid"), attempts to use IRQ 0 cause warnings. If the user specifies IRQ 0, return failure instead of registering a device with IRQ 0. Fixes: a85a6c86c25be ("driver core: platform: Clarify that IRQ 0 is invalid") Signed-off-by: Bjorn Helgaas Acked-by: Jason Wang Acked-by: Michael S. Tsirkin --- drivers/virtio/virtio_mmio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c index 9d16aaffca9d..627ac0487494 100644 --- a/drivers/virtio/virtio_mmio.c +++ b/drivers/virtio/virtio_mmio.c @@ -641,11 +641,11 @@ static int vm_cmdline_set(const char *device, &vm_cmdline_id, &consumed); /* - * sscanf() must processes at least 2 chunks; also there + * sscanf() must process at least 2 chunks; also there * must be no extra characters after the last chunk, so * str[consumed] must be '\0' */ - if (processed < 2 || str[consumed]) + if (processed < 2 || str[consumed] || irq == 0) return -EINVAL; resources[0].flags = IORESOURCE_MEM; -- cgit v1.2.3 From d08c30d7a0d1826f771f16cde32bd86e48401791 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 17 Jul 2020 17:21:28 -0500 Subject: Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms" This reverts commit ec411e02b7a2e785a4ed9ed283207cd14f48699d. Patrick reported that this commit broke hybrid graphics on a ThinkPad X1 Extreme 2nd with Intel UHD Graphics 630 and NVIDIA GeForce GTX 1650 Mobile: nouveau 0000:01:00.0: fifo: PBDMA0: 01000000 [] ch 0 [00ff992000 DRM] subc 0 mthd 0008 data 00000000 Karol reported that this commit broke Nouveau firmware loading on a Lenovo P1G2 with Intel UHD Graphics 630 and NVIDIA TU117GLM [Quadro T1000 Mobile]: nouveau 0000:01:00.0: acr: AHESASC binary failed In both cases, reverting ec411e02b7a2 solved the problem. Unfortunately, this revert will reintroduce the "Thunderbolt bridges take long time to resume from D3cold" problem: https://bugzilla.kernel.org/show_bug.cgi?id=206837 Link: https://lore.kernel.org/r/CAErSpo5sTeK_my1dEhWp7aHD0xOp87+oHYWkTjbL7ALgDbXo-Q@mail.gmail.com Link: https://lore.kernel.org/r/CACO55tsAEa5GXw5oeJPG=mcn+qxNvspXreJYWDJGZBy5v82JDA@mail.gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=208597 Reported-by: Patrick Volkerding Reported-by: Karol Herbst Fixes: ec411e02b7a2 ("PCI/PM: Assume ports without DLL Link Active train links in 100 ms") Signed-off-by: Bjorn Helgaas --- drivers/pci/pci.c | 30 +++++++++--------------------- 1 file changed, 9 insertions(+), 21 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index ce096272f52b..c9338f914a0e 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -4638,8 +4638,7 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) * pcie_wait_for_link_delay - Wait until link is active or inactive * @pdev: Bridge device * @active: waiting for active or inactive? - * @delay: Delay to wait after link has become active (in ms). Specify %0 - * for no delay. + * @delay: Delay to wait after link has become active (in ms) * * Use this to wait till link becomes active or inactive. */ @@ -4680,7 +4679,7 @@ static bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, msleep(10); timeout -= 10; } - if (active && ret && delay) + if (active && ret) msleep(delay); else if (ret != active) pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n", @@ -4801,28 +4800,17 @@ void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev) if (!pcie_downstream_port(dev)) return; - /* - * Per PCIe r5.0, sec 6.6.1, for downstream ports that support - * speeds > 5 GT/s, we must wait for link training to complete - * before the mandatory delay. - * - * We can only tell when link training completes via DLL Link - * Active, which is required for downstream ports that support - * speeds > 5 GT/s (sec 7.5.3.6). Unfortunately some common - * devices do not implement Link Active reporting even when it's - * required, so we'll check for that directly instead of checking - * the supported link speed. We assume devices without Link Active - * reporting can train in 100 ms regardless of speed. - */ - if (dev->link_active_reporting) { - pci_dbg(dev, "waiting for link to train\n"); - if (!pcie_wait_for_link_delay(dev, true, 0)) { + if (pcie_get_speed_cap(dev) <= PCIE_SPEED_5_0GT) { + pci_dbg(dev, "waiting %d ms for downstream link\n", delay); + msleep(delay); + } else { + pci_dbg(dev, "waiting %d ms for downstream link, after activation\n", + delay); + if (!pcie_wait_for_link_delay(dev, true, delay)) { /* Did not train, no need to wait any further */ return; } } - pci_dbg(child, "waiting %d ms to become accessible\n", delay); - msleep(delay); if (!pci_device_is_present(child)) { pci_dbg(child, "waiting additional %d ms to become accessible\n", delay); -- cgit v1.2.3 From 9affa435817711861d774f5626c393c80f16d044 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Wed, 15 Jul 2020 13:31:36 -0400 Subject: nfsd4: fix NULL dereference in nfsd/clients display code We hold the cl_lock here, and that's enough to keep stateid's from going away, but it's not enough to prevent the files they point to from going away. Take fi_lock and a reference and check for NULL, as we do in other code. Reported-by: NeilBrown Fixes: 78599c42ae3c ("nfsd4: add file to display list of client's opens") Reviewed-by: NeilBrown Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index cce2510b2cca..c9056316a0b3 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -507,6 +507,17 @@ find_any_file(struct nfs4_file *f) return ret; } +static struct nfsd_file *find_deleg_file(struct nfs4_file *f) +{ + struct nfsd_file *ret = NULL; + + spin_lock(&f->fi_lock); + if (f->fi_deleg_file) + ret = nfsd_file_get(f->fi_deleg_file); + spin_unlock(&f->fi_lock); + return ret; +} + static atomic_long_t num_delegations; unsigned long max_delegations; @@ -2444,6 +2455,8 @@ static int nfs4_show_open(struct seq_file *s, struct nfs4_stid *st) oo = ols->st_stateowner; nf = st->sc_file; file = find_any_file(nf); + if (!file) + return 0; seq_printf(s, "- "); nfs4_show_stateid(s, &st->sc_stateid); @@ -2481,6 +2494,8 @@ static int nfs4_show_lock(struct seq_file *s, struct nfs4_stid *st) oo = ols->st_stateowner; nf = st->sc_file; file = find_any_file(nf); + if (!file) + return 0; seq_printf(s, "- "); nfs4_show_stateid(s, &st->sc_stateid); @@ -2513,7 +2528,9 @@ static int nfs4_show_deleg(struct seq_file *s, struct nfs4_stid *st) ds = delegstateid(st); nf = st->sc_file; - file = nf->fi_deleg_file; + file = find_deleg_file(nf); + if (!file) + return 0; seq_printf(s, "- "); nfs4_show_stateid(s, &st->sc_stateid); @@ -2529,6 +2546,7 @@ static int nfs4_show_deleg(struct seq_file *s, struct nfs4_stid *st) seq_printf(s, ", "); nfs4_show_fname(s, file); seq_printf(s, " }\n"); + nfsd_file_put(file); return 0; } -- cgit v1.2.3 From 372a8eaa05998cd45b3417d0e0ffd3a70978211a Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Fri, 17 Jul 2020 09:04:25 -0500 Subject: x86/unwind/orc: Fix ORC for newly forked tasks The ORC unwinder fails to unwind newly forked tasks which haven't yet run on the CPU. It correctly reads the 'ret_from_fork' instruction pointer from the stack, but it incorrectly interprets that value as a call stack address rather than a "signal" one, so the address gets incorrectly decremented in the call to orc_find(), resulting in bad ORC data. Fix it by forcing 'ret_from_fork' frames to be signal frames. Reported-by: Wang ShaoBo Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Tested-by: Wang ShaoBo Link: https://lkml.kernel.org/r/f91a8778dde8aae7f71884b5df2b16d552040441.1594994374.git.jpoimboe@redhat.com --- arch/x86/kernel/unwind_orc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/unwind_orc.c b/arch/x86/kernel/unwind_orc.c index 7f969b2d240f..ec88bbe08a32 100644 --- a/arch/x86/kernel/unwind_orc.c +++ b/arch/x86/kernel/unwind_orc.c @@ -440,8 +440,11 @@ bool unwind_next_frame(struct unwind_state *state) /* * Find the orc_entry associated with the text address. * - * Decrement call return addresses by one so they work for sibling - * calls and calls to noreturn functions. + * For a call frame (as opposed to a signal frame), state->ip points to + * the instruction after the call. That instruction's stack layout + * could be different from the call instruction's layout, for example + * if the call was to a noreturn function. So get the ORC data for the + * call instruction itself. */ orc = orc_find(state->signal ? state->ip : state->ip - 1); if (!orc) { @@ -662,6 +665,7 @@ void __unwind_start(struct unwind_state *state, struct task_struct *task, state->sp = task->thread.sp; state->bp = READ_ONCE_NOCHECK(frame->bp); state->ip = READ_ONCE_NOCHECK(frame->ret_addr); + state->signal = (void *)state->ip == ret_from_fork; } if (get_stack_info((unsigned long *)state->sp, state->task, -- cgit v1.2.3 From 039a7a30ec102ec866d382a66f87f6f7654f8140 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Fri, 17 Jul 2020 09:04:26 -0500 Subject: x86/stacktrace: Fix reliable check for empty user task stacks If a user task's stack is empty, or if it only has user regs, ORC reports it as a reliable empty stack. But arch_stack_walk_reliable() incorrectly treats it as unreliable. That happens because the only success path for user tasks is inside the loop, which only iterates on non-empty stacks. Generally, a user task must end in a user regs frame, but an empty stack is an exception to that rule. Thanks to commit 71c95825289f ("x86/unwind/orc: Fix error handling in __unwind_start()"), unwind_start() now sets state->error appropriately. So now for both ORC and FP unwinders, unwind_done() and !unwind_error() always means the end of the stack was successfully reached. So the success path for kthreads is no longer needed -- it can also be used for empty user tasks. Reported-by: Wang ShaoBo Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Tested-by: Wang ShaoBo Link: https://lkml.kernel.org/r/f136a4e5f019219cbc4f4da33b30c2f44fa65b84.1594994374.git.jpoimboe@redhat.com --- arch/x86/kernel/stacktrace.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index 6ad43fc44556..2fd698e28e4d 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -58,7 +58,6 @@ int arch_stack_walk_reliable(stack_trace_consume_fn consume_entry, * or a page fault), which can make frame pointers * unreliable. */ - if (IS_ENABLED(CONFIG_FRAME_POINTER)) return -EINVAL; } @@ -81,10 +80,6 @@ int arch_stack_walk_reliable(stack_trace_consume_fn consume_entry, if (unwind_error(&state)) return -EINVAL; - /* Success path for non-user tasks, i.e. kthreads and idle tasks */ - if (!(task->flags & (PF_KTHREAD | PF_IDLE))) - return -EINVAL; - return 0; } -- cgit v1.2.3 From d181d2da0141371bbc360eaea78719203e165e1c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 22 Jul 2020 10:39:54 +0200 Subject: x86/dumpstack: Dump user space code correctly again H.J. reported that post 5.7 a segfault of a user space task does not longer dump the Code bytes when /proc/sys/debug/exception-trace is enabled. It prints 'Code: Bad RIP value.' instead. This was broken by a recent change which made probe_kernel_read() reject non-kernel addresses. Update show_opcodes() so it retrieves user space opcodes via copy_from_user_nmi(). Fixes: 98a23609b103 ("maccess: always use strict semantics for probe_kernel_read") Reported-by: H.J. Lu Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/87h7tz306w.fsf@nanos.tec.linutronix.de --- arch/x86/kernel/dumpstack.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index b037cfa7c0c5..7401cc12c3cc 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -71,6 +71,22 @@ static void printk_stack_address(unsigned long address, int reliable, printk("%s %s%pB\n", log_lvl, reliable ? "" : "? ", (void *)address); } +static int copy_code(struct pt_regs *regs, u8 *buf, unsigned long src, + unsigned int nbytes) +{ + if (!user_mode(regs)) + return copy_from_kernel_nofault(buf, (u8 *)src, nbytes); + + /* + * Make sure userspace isn't trying to trick us into dumping kernel + * memory by pointing the userspace instruction pointer at it. + */ + if (__chk_range_not_ok(src, nbytes, TASK_SIZE_MAX)) + return -EINVAL; + + return copy_from_user_nmi(buf, (void __user *)src, nbytes); +} + /* * There are a couple of reasons for the 2/3rd prologue, courtesy of Linus: * @@ -97,17 +113,8 @@ void show_opcodes(struct pt_regs *regs, const char *loglvl) #define OPCODE_BUFSIZE (PROLOGUE_SIZE + 1 + EPILOGUE_SIZE) u8 opcodes[OPCODE_BUFSIZE]; unsigned long prologue = regs->ip - PROLOGUE_SIZE; - bool bad_ip; - - /* - * Make sure userspace isn't trying to trick us into dumping kernel - * memory by pointing the userspace instruction pointer at it. - */ - bad_ip = user_mode(regs) && - __chk_range_not_ok(prologue, OPCODE_BUFSIZE, TASK_SIZE_MAX); - if (bad_ip || copy_from_kernel_nofault(opcodes, (u8 *)prologue, - OPCODE_BUFSIZE)) { + if (copy_code(regs, opcodes, prologue, sizeof(opcodes))) { printk("%sCode: Bad RIP value.\n", loglvl); } else { printk("%sCode: %" __stringify(PROLOGUE_SIZE) "ph <%02x> %" -- cgit v1.2.3 From 26cb7085c8984e5b71d65c374a135134ed8cabb3 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Wed, 22 Jul 2020 17:40:12 +0300 Subject: enetc: Remove the mdio bus on PF probe bailout For ENETC ports that register an external MDIO bus, the bus doesn't get removed on the error bailout path of enetc_pf_probe(). This issue became much more visible after recent: commit 07095c025ac2 ("net: enetc: Use DT protocol information to set up the ports") Before this commit, one could make probing fail on the error path only by having register_netdev() fail, which is unlikely. But after this commit, because it moved the enetc_of_phy_get() call up in the probing sequence, now we can trigger an mdiobus_free() bug just by forcing enetc_alloc_msix() to return error, i.e. with the 'pci=nomsi' kernel bootarg (since ENETC relies on MSI support to work), as the calltrace below shows: kernel BUG at /home/eiz/work/enetc/net/drivers/net/phy/mdio_bus.c:648! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [...] Hardware name: LS1028A RDB Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--) pc : mdiobus_free+0x50/0x58 lr : devm_mdiobus_free+0x14/0x20 [...] Call trace: mdiobus_free+0x50/0x58 devm_mdiobus_free+0x14/0x20 release_nodes+0x138/0x228 devres_release_all+0x38/0x60 really_probe+0x1c8/0x368 driver_probe_device+0x5c/0xc0 device_driver_attach+0x74/0x80 __driver_attach+0x8c/0xd8 bus_for_each_dev+0x7c/0xd8 driver_attach+0x24/0x30 bus_add_driver+0x154/0x200 driver_register+0x64/0x120 __pci_register_driver+0x44/0x50 enetc_pf_driver_init+0x24/0x30 do_one_initcall+0x60/0x1c0 kernel_init_freeable+0x1fc/0x274 kernel_init+0x14/0x110 ret_from_fork+0x10/0x34 Fixes: ebfcb23d62ab ("enetc: Add ENETC PF level external MDIO support") Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 4fac57dbb3c8..7a9675bd36e8 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -906,6 +906,7 @@ static int enetc_pf_probe(struct pci_dev *pdev, return 0; err_reg_netdev: + enetc_mdio_remove(pf); enetc_of_put_phy(priv); enetc_free_msix(priv); err_alloc_msix: -- cgit v1.2.3 From 2f2a7ffad5c6cbf3d438e813cfdc88230e185ba6 Mon Sep 17 00:00:00 2001 From: Peilin Ye Date: Wed, 22 Jul 2020 11:19:01 -0400 Subject: AX.25: Fix out-of-bounds read in ax25_connect() Checks on `addr_len` and `fsa->fsa_ax25.sax25_ndigis` are insufficient. ax25_connect() can go out of bounds when `fsa->fsa_ax25.sax25_ndigis` equals to 7 or 8. Fix it. This issue has been reported as a KMSAN uninit-value bug, because in such a case, ax25_connect() reaches into the uninitialized portion of the `struct sockaddr_storage` statically allocated in __sys_connect(). It is safe to remove `fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS` because `addr_len` is guaranteed to be less than or equal to `sizeof(struct full_sockaddr_ax25)`. Reported-by: syzbot+c82752228ed975b0a623@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=55ef9d629f3b3d7d70b69558015b63b48d01af66 Signed-off-by: Peilin Ye Signed-off-by: David S. Miller --- net/ax25/af_ax25.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index fd91cd34f25e..ef5bf116157a 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -1187,7 +1187,9 @@ static int __must_check ax25_connect(struct socket *sock, if (addr_len > sizeof(struct sockaddr_ax25) && fsa->fsa_ax25.sax25_ndigis != 0) { /* Valid number of digipeaters ? */ - if (fsa->fsa_ax25.sax25_ndigis < 1 || fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS) { + if (fsa->fsa_ax25.sax25_ndigis < 1 || + addr_len < sizeof(struct sockaddr_ax25) + + sizeof(ax25_address) * fsa->fsa_ax25.sax25_ndigis) { err = -EINVAL; goto out_release; } -- cgit v1.2.3 From 8f13399db22f909a35735bf8ae2f932e0c8f0e30 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Wed, 22 Jul 2020 23:52:11 +0800 Subject: sctp: shrink stream outq only when new outcnt < old outcnt It's not necessary to go list_for_each for outq->out_chunk_list when new outcnt >= old outcnt, as no chunk with higher sid than new (outcnt - 1) exists in the outqueue. While at it, also move the list_for_each code in a new function sctp_stream_shrink_out(), which will be used in the next patch. Signed-off-by: Xin Long Signed-off-by: David S. Miller --- net/sctp/stream.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/net/sctp/stream.c b/net/sctp/stream.c index 67f7e71f9129..4f87693cc036 100644 --- a/net/sctp/stream.c +++ b/net/sctp/stream.c @@ -22,17 +22,11 @@ #include #include -/* Migrates chunks from stream queues to new stream queues if needed, - * but not across associations. Also, removes those chunks to streams - * higher than the new max. - */ -static void sctp_stream_outq_migrate(struct sctp_stream *stream, - struct sctp_stream *new, __u16 outcnt) +static void sctp_stream_shrink_out(struct sctp_stream *stream, __u16 outcnt) { struct sctp_association *asoc; struct sctp_chunk *ch, *temp; struct sctp_outq *outq; - int i; asoc = container_of(stream, struct sctp_association, stream); outq = &asoc->outqueue; @@ -56,6 +50,19 @@ static void sctp_stream_outq_migrate(struct sctp_stream *stream, sctp_chunk_free(ch); } +} + +/* Migrates chunks from stream queues to new stream queues if needed, + * but not across associations. Also, removes those chunks to streams + * higher than the new max. + */ +static void sctp_stream_outq_migrate(struct sctp_stream *stream, + struct sctp_stream *new, __u16 outcnt) +{ + int i; + + if (stream->outcnt > outcnt) + sctp_stream_shrink_out(stream, outcnt); if (new) { /* Here we actually move the old ext stuff into the new -- cgit v1.2.3 From 3ecdda3e9ad837cf9cb41b6faa11b1af3a5abc0c Mon Sep 17 00:00:00 2001 From: Xin Long Date: Wed, 22 Jul 2020 23:52:12 +0800 Subject: sctp: shrink stream outq when fails to do addstream reconf When adding a stream with stream reconf, the new stream firstly is in CLOSED state but new out chunks can still be enqueued. Then once gets the confirmation from the peer, the state will change to OPEN. However, if the peer denies, it needs to roll back the stream. But when doing that, it only sets the stream outcnt back, and the chunks already in the new stream don't get purged. It caused these chunks can still be dequeued in sctp_outq_dequeue_data(). As its stream is still in CLOSE, the chunk will be enqueued to the head again by sctp_outq_head_data(). This chunk will never be sent out, and the chunks after it can never be dequeued. The assoc will be 'hung' in a dead loop of sending this chunk. To fix it, this patch is to purge these chunks already in the new stream by calling sctp_stream_shrink_out() when failing to do the addstream reconf. Fixes: 11ae76e67a17 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by: Ying Xu Signed-off-by: Xin Long Signed-off-by: David S. Miller --- net/sctp/stream.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/sctp/stream.c b/net/sctp/stream.c index 4f87693cc036..bda2536dd740 100644 --- a/net/sctp/stream.c +++ b/net/sctp/stream.c @@ -1044,11 +1044,13 @@ struct sctp_chunk *sctp_process_strreset_resp( nums = ntohs(addstrm->number_of_streams); number = stream->outcnt - nums; - if (result == SCTP_STRRESET_PERFORMED) + if (result == SCTP_STRRESET_PERFORMED) { for (i = number; i < stream->outcnt; i++) SCTP_SO(stream, i)->state = SCTP_STREAM_OPEN; - else + } else { + sctp_stream_shrink_out(stream, number); stream->outcnt = number; + } *evp = sctp_ulpevent_make_stream_change_event(asoc, flags, 0, nums, GFP_ATOMIC); -- cgit v1.2.3 From 8885bb0621f01a6c82be60a91e5fc0f6e2f71186 Mon Sep 17 00:00:00 2001 From: Peilin Ye Date: Wed, 22 Jul 2020 12:05:12 -0400 Subject: AX.25: Prevent out-of-bounds read in ax25_sendmsg() Checks on `addr_len` and `usax->sax25_ndigis` are insufficient. ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7 or 8. Fix it. It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since `addr_len` is guaranteed to be less than or equal to `sizeof(struct full_sockaddr_ax25)` Signed-off-by: Peilin Ye Signed-off-by: David S. Miller --- net/ax25/af_ax25.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index ef5bf116157a..0862fe49d434 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -1509,7 +1509,8 @@ static int ax25_sendmsg(struct socket *sock, struct msghdr *msg, size_t len) struct full_sockaddr_ax25 *fsa = (struct full_sockaddr_ax25 *)usax; /* Valid number of digipeaters ? */ - if (usax->sax25_ndigis < 1 || usax->sax25_ndigis > AX25_MAX_DIGIS) { + if (usax->sax25_ndigis < 1 || addr_len < sizeof(struct sockaddr_ax25) + + sizeof(ax25_address) * usax->sax25_ndigis) { err = -EINVAL; goto out; } -- cgit v1.2.3 From 901f3cc1639e5103a8997f6ab243785d292e2074 Mon Sep 17 00:00:00 2001 From: Egor Pomozov Date: Wed, 22 Jul 2020 22:09:58 +0300 Subject: net: atlantic: fix PTP on AQC10X This patch fixes PTP on AQC10X. PTP support on AQC10X requires FW involvement and FW configures the TPS data arb mode itself. So we must make sure driver doesn't touch TPS data arb mode on AQC10x if PTP is enabled. Otherwise, there are no timestamps even though packets are flowing. Fixes: 2deac71ac492a ("net: atlantic: QoS implementation: min_rate") Signed-off-by: Egor Pomozov Signed-off-by: Mark Starovoytov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index d2bc6b289a54..2125bc20ab6a 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -373,8 +373,13 @@ static int hw_atl_b0_hw_init_tx_tc_rate_limit(struct aq_hw_s *self) /* WSP, if min_rate is set for at least one TC. * RR otherwise. + * + * NB! MAC FW sets arb mode itself if PTP is enabled. We shouldn't + * overwrite it here in that case. */ - hw_atl_tps_tx_pkt_shed_data_arb_mode_set(self, min_rate_msk ? 1U : 0U); + if (!nic_cfg->is_ptp) + hw_atl_tps_tx_pkt_shed_data_arb_mode_set(self, min_rate_msk ? 1U : 0U); + /* Data TC Arbiter takes precedence over Descriptor TC Arbiter, * leave Descriptor TC Arbiter as RR. */ -- cgit v1.2.3 From e6827d1abdc9b061a57d7b7d3019c4e99fabea2f Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Wed, 22 Jul 2020 21:58:39 -0500 Subject: cxgb4: add missing release on skb in uld_send() In the implementation of uld_send(), the skb is consumed on all execution paths except one. Release skb when returning NET_XMIT_DROP. Signed-off-by: Navid Emamdoost Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/sge.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index 32a45dc51ed7..92eee66cbc84 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -2938,6 +2938,7 @@ static inline int uld_send(struct adapter *adap, struct sk_buff *skb, txq_info = adap->sge.uld_txq_info[tx_uld_type]; if (unlikely(!txq_info)) { WARN_ON(true); + kfree_skb(skb); return NET_XMIT_DROP; } -- cgit v1.2.3 From 7b7891c7bdfd61fc9ed6747a0a05efe2394dddc6 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Wed, 22 Jul 2020 21:15:10 -0700 Subject: arm64: vdso32: Fix '--prefix=' value for newer versions of clang Newer versions of clang only look for $(COMPAT_GCC_TOOLCHAIN_DIR)as [1], rather than $(COMPAT_GCC_TOOLCHAIN_DIR)$(CROSS_COMPILE_COMPAT)as, resulting in the following build error: $ make -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- \ CROSS_COMPILE_COMPAT=arm-linux-gnueabi- LLVM=1 O=out/aarch64 distclean \ defconfig arch/arm64/kernel/vdso32/ ... /home/nathan/cbl/toolchains/llvm-binutils/bin/as: unrecognized option '-EL' clang-12: error: assembler command failed with exit code 1 (use -v to see invocation) make[3]: *** [arch/arm64/kernel/vdso32/Makefile:181: arch/arm64/kernel/vdso32/note.o] Error 1 ... Adding the value of CROSS_COMPILE_COMPAT (adding notdir to account for a full path for CROSS_COMPILE_COMPAT) fixes this issue, which matches the solution done for the main Makefile [2]. [1]: https://github.com/llvm/llvm-project/commit/3452a0d8c17f7166f479706b293caf6ac76ffd90 [2]: https://lore.kernel.org/lkml/20200721173125.1273884-1-maskray@google.com/ Signed-off-by: Nathan Chancellor Cc: stable@vger.kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/1099 Link: https://lore.kernel.org/r/20200723041509.400450-1-natechancellor@gmail.com Signed-off-by: Will Deacon --- arch/arm64/kernel/vdso32/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile index d88148bef6b0..5139a5f19256 100644 --- a/arch/arm64/kernel/vdso32/Makefile +++ b/arch/arm64/kernel/vdso32/Makefile @@ -14,7 +14,7 @@ COMPAT_GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE_COMPAT)elfedit)) COMPAT_GCC_TOOLCHAIN := $(realpath $(COMPAT_GCC_TOOLCHAIN_DIR)/..) CC_COMPAT_CLANG_FLAGS := --target=$(notdir $(CROSS_COMPILE_COMPAT:%-=%)) -CC_COMPAT_CLANG_FLAGS += --prefix=$(COMPAT_GCC_TOOLCHAIN_DIR) +CC_COMPAT_CLANG_FLAGS += --prefix=$(COMPAT_GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE_COMPAT)) CC_COMPAT_CLANG_FLAGS += -no-integrated-as -Qunused-arguments ifneq ($(COMPAT_GCC_TOOLCHAIN),) CC_COMPAT_CLANG_FLAGS += --gcc-toolchain=$(COMPAT_GCC_TOOLCHAIN) -- cgit v1.2.3 From 3e863ea3bb1a2203ae648eb272db0ce6a1a2072c Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Thu, 23 Jul 2020 20:17:20 +0300 Subject: io_uring: missed req_init_async() for IOSQE_ASYNC IOSQE_ASYNC branch of io_queue_sqe() is another place where an unitialised req->work can be accessed (i.e. prior io_req_init_async()). Nothing really bad though, it just looses IO_WQ_WORK_CONCURRENT flag. Signed-off-by: Pavel Begunkov Signed-off-by: Jens Axboe --- fs/io_uring.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/io_uring.c b/fs/io_uring.c index d99802ac166f..32b0064f806e 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -5730,6 +5730,7 @@ fail_req: * Never try inline submit of IOSQE_ASYNC is set, go straight * to async execution. */ + io_req_init_async(req); req->work.flags |= IO_WQ_WORK_CONCURRENT; io_queue_async_work(req); } else { -- cgit v1.2.3 From 5df96f2b9f58a5d2dc1f30fe7de75e197f2c25f2 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 23 Jul 2020 10:42:09 -0400 Subject: dm integrity: fix integrity recalculation that is improperly skipped Commit adc0daad366b62ca1bce3e2958a40b0b71a8b8b3 ("dm: report suspended device during destroy") broke integrity recalculation. The problem is dm_suspended() returns true not only during suspend, but also during resume. So this race condition could occur: 1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work) 2. integrity_recalc (&ic->recalc_work) preempts the current thread 3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret; 4. integrity_recalc exits and no recalculating is done. To fix this race condition, add a function dm_post_suspending that is only true during the postsuspend phase and use it instead of dm_suspended(). Signed-off-by: Mikulas Patocka Fixes: adc0daad366b ("dm: report suspended device during destroy") Cc: stable vger kernel org # v4.18+ Signed-off-by: Mike Snitzer --- drivers/md/dm-integrity.c | 4 ++-- drivers/md/dm.c | 17 +++++++++++++++++ include/linux/device-mapper.h | 1 + 3 files changed, 20 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c index 81dc5ff08909..a83a1de1e03f 100644 --- a/drivers/md/dm-integrity.c +++ b/drivers/md/dm-integrity.c @@ -2420,7 +2420,7 @@ static void integrity_writer(struct work_struct *w) unsigned prev_free_sectors; /* the following test is not needed, but it tests the replay code */ - if (unlikely(dm_suspended(ic->ti)) && !ic->meta_dev) + if (unlikely(dm_post_suspending(ic->ti)) && !ic->meta_dev) return; spin_lock_irq(&ic->endio_wait.lock); @@ -2481,7 +2481,7 @@ static void integrity_recalc(struct work_struct *w) next_chunk: - if (unlikely(dm_suspended(ic->ti))) + if (unlikely(dm_post_suspending(ic->ti))) goto unlock_ret; range.logical_sector = le64_to_cpu(ic->sb->recalc_sector); diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 52449afd58eb..5b9de2f71bb0 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -143,6 +143,7 @@ EXPORT_SYMBOL_GPL(dm_bio_get_target_bio_nr); #define DMF_NOFLUSH_SUSPENDING 5 #define DMF_DEFERRED_REMOVE 6 #define DMF_SUSPENDED_INTERNALLY 7 +#define DMF_POST_SUSPENDING 8 #define DM_NUMA_NODE NUMA_NO_NODE static int dm_numa_node = DM_NUMA_NODE; @@ -2408,6 +2409,7 @@ static void __dm_destroy(struct mapped_device *md, bool wait) if (!dm_suspended_md(md)) { dm_table_presuspend_targets(map); set_bit(DMF_SUSPENDED, &md->flags); + set_bit(DMF_POST_SUSPENDING, &md->flags); dm_table_postsuspend_targets(map); } /* dm_put_live_table must be before msleep, otherwise deadlock is possible */ @@ -2766,7 +2768,9 @@ retry: if (r) goto out_unlock; + set_bit(DMF_POST_SUSPENDING, &md->flags); dm_table_postsuspend_targets(map); + clear_bit(DMF_POST_SUSPENDING, &md->flags); out_unlock: mutex_unlock(&md->suspend_lock); @@ -2863,7 +2867,9 @@ static void __dm_internal_suspend(struct mapped_device *md, unsigned suspend_fla (void) __dm_suspend(md, map, suspend_flags, TASK_UNINTERRUPTIBLE, DMF_SUSPENDED_INTERNALLY); + set_bit(DMF_POST_SUSPENDING, &md->flags); dm_table_postsuspend_targets(map); + clear_bit(DMF_POST_SUSPENDING, &md->flags); } static void __dm_internal_resume(struct mapped_device *md) @@ -3024,6 +3030,11 @@ int dm_suspended_md(struct mapped_device *md) return test_bit(DMF_SUSPENDED, &md->flags); } +static int dm_post_suspending_md(struct mapped_device *md) +{ + return test_bit(DMF_POST_SUSPENDING, &md->flags); +} + int dm_suspended_internally_md(struct mapped_device *md) { return test_bit(DMF_SUSPENDED_INTERNALLY, &md->flags); @@ -3040,6 +3051,12 @@ int dm_suspended(struct dm_target *ti) } EXPORT_SYMBOL_GPL(dm_suspended); +int dm_post_suspending(struct dm_target *ti) +{ + return dm_post_suspending_md(dm_table_get_md(ti->table)); +} +EXPORT_SYMBOL_GPL(dm_post_suspending); + int dm_noflush_suspending(struct dm_target *ti) { return __noflush_suspending(dm_table_get_md(ti->table)); diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 8750f2dc5613..73dec4b5d5be 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -426,6 +426,7 @@ const char *dm_device_name(struct mapped_device *md); int dm_copy_name_and_uuid(struct mapped_device *md, char *name, char *uuid); struct gendisk *dm_disk(struct mapped_device *md); int dm_suspended(struct dm_target *ti); +int dm_post_suspending(struct dm_target *ti); int dm_noflush_suspending(struct dm_target *ti); void dm_accept_partial_bio(struct bio *bio, unsigned n_sectors); union map_info *dm_get_rq_mapinfo(struct request *rq); -- cgit v1.2.3 From 17ad73e941b71f3bec7523ea4e9cbc3752461c2d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 23 Jul 2020 17:49:57 +0300 Subject: AX.25: Prevent integer overflows in connect and sendmsg We recently added some bounds checking in ax25_connect() and ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because they were no longer required. Unfortunately, I believe they are required to prevent integer overflows so I have added them back. Fixes: 8885bb0621f0 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()") Fixes: 2f2a7ffad5c6 ("AX.25: Fix out-of-bounds read in ax25_connect()") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- net/ax25/af_ax25.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index 0862fe49d434..dec3f35467c9 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -1188,6 +1188,7 @@ static int __must_check ax25_connect(struct socket *sock, fsa->fsa_ax25.sax25_ndigis != 0) { /* Valid number of digipeaters ? */ if (fsa->fsa_ax25.sax25_ndigis < 1 || + fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS || addr_len < sizeof(struct sockaddr_ax25) + sizeof(ax25_address) * fsa->fsa_ax25.sax25_ndigis) { err = -EINVAL; @@ -1509,7 +1510,9 @@ static int ax25_sendmsg(struct socket *sock, struct msghdr *msg, size_t len) struct full_sockaddr_ax25 *fsa = (struct full_sockaddr_ax25 *)usax; /* Valid number of digipeaters ? */ - if (usax->sax25_ndigis < 1 || addr_len < sizeof(struct sockaddr_ax25) + + if (usax->sax25_ndigis < 1 || + usax->sax25_ndigis > AX25_MAX_DIGIS || + addr_len < sizeof(struct sockaddr_ax25) + sizeof(ax25_address) * usax->sax25_ndigis) { err = -EINVAL; goto out; -- cgit v1.2.3 From 76be93fc0702322179bb0ea87295d820ee46ad14 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Thu, 23 Jul 2020 12:00:06 -0700 Subject: tcp: allow at most one TLP probe per flight Previously TLP may send multiple probes of new data in one flight. This happens when the sender is cwnd limited. After the initial TLP containing new data is sent, the sender receives another ACK that acks partial inflight. It may re-arm another TLP timer to send more, if no further ACK returns before the next TLP timeout (PTO) expires. The sender may send in theory a large amount of TLP until send queue is depleted. This only happens if the sender sees such irregular uncommon ACK pattern. But it is generally undesirable behavior during congestion especially. The original TLP design restrict only one TLP probe per inflight as published in "Reducing Web Latency: the Virtue of Gentle Aggression", SIGCOMM 2013. This patch changes TLP to send at most one probe per inflight. Note that if the sender is app-limited, TLP retransmits old data and did not have this issue. Signed-off-by: Yuchung Cheng Signed-off-by: Neal Cardwell Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/tcp.h | 6 ++++-- net/ipv4/tcp_input.c | 11 ++++++----- net/ipv4/tcp_output.c | 13 ++++++++----- 3 files changed, 18 insertions(+), 12 deletions(-) diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 9aac824c523c..a1bbaa1c1a3a 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -220,7 +220,9 @@ struct tcp_sock { } rack; u16 advmss; /* Advertised MSS */ u8 compressed_ack; - u8 dup_ack_counter; + u8 dup_ack_counter:2, + tlp_retrans:1, /* TLP is a retransmission */ + unused:5; u32 chrono_start; /* Start time in jiffies of a TCP chrono */ u32 chrono_stat[3]; /* Time in jiffies for chrono_stat stats */ u8 chrono_type:2, /* current chronograph type */ @@ -243,7 +245,7 @@ struct tcp_sock { save_syn:1, /* Save headers of SYN packet */ is_cwnd_limited:1,/* forward progress limited by snd_cwnd? */ syn_smc:1; /* SYN includes SMC */ - u32 tlp_high_seq; /* snd_nxt at the time of TLP retransmit. */ + u32 tlp_high_seq; /* snd_nxt at the time of TLP */ u32 tcp_tx_delay; /* delay (in usec) added to TX packets */ u64 tcp_wstamp_ns; /* departure time for next sent data packet */ diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 9615e72656d1..518f04355fbf 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3488,10 +3488,8 @@ static void tcp_replace_ts_recent(struct tcp_sock *tp, u32 seq) } } -/* This routine deals with acks during a TLP episode. - * We mark the end of a TLP episode on receiving TLP dupack or when - * ack is after tlp_high_seq. - * Ref: loss detection algorithm in draft-dukkipati-tcpm-tcp-loss-probe. +/* This routine deals with acks during a TLP episode and ends an episode by + * resetting tlp_high_seq. Ref: TLP algorithm in draft-ietf-tcpm-rack */ static void tcp_process_tlp_ack(struct sock *sk, u32 ack, int flag) { @@ -3500,7 +3498,10 @@ static void tcp_process_tlp_ack(struct sock *sk, u32 ack, int flag) if (before(ack, tp->tlp_high_seq)) return; - if (flag & FLAG_DSACKING_ACK) { + if (!tp->tlp_retrans) { + /* TLP of new data has been acknowledged */ + tp->tlp_high_seq = 0; + } else if (flag & FLAG_DSACKING_ACK) { /* This DSACK means original and TLP probe arrived; no loss */ tp->tlp_high_seq = 0; } else if (after(ack, tp->tlp_high_seq)) { diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 5f5b2f0b0e60..0bc05d68cd74 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2624,6 +2624,11 @@ void tcp_send_loss_probe(struct sock *sk) int pcount; int mss = tcp_current_mss(sk); + /* At most one outstanding TLP */ + if (tp->tlp_high_seq) + goto rearm_timer; + + tp->tlp_retrans = 0; skb = tcp_send_head(sk); if (skb && tcp_snd_wnd_test(tp, skb, mss)) { pcount = tp->packets_out; @@ -2641,10 +2646,6 @@ void tcp_send_loss_probe(struct sock *sk) return; } - /* At most one outstanding TLP retransmission. */ - if (tp->tlp_high_seq) - goto rearm_timer; - if (skb_still_in_host_queue(sk, skb)) goto rearm_timer; @@ -2666,10 +2667,12 @@ void tcp_send_loss_probe(struct sock *sk) if (__tcp_retransmit_skb(sk, skb, 1)) goto rearm_timer; + tp->tlp_retrans = 1; + +probe_sent: /* Record snd_nxt for loss detection. */ tp->tlp_high_seq = tp->snd_nxt; -probe_sent: NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPLOSSPROBES); /* Reset s.t. tcp_rearm_rto will restart timer from now */ inet_csk(sk)->icsk_pending = 0; -- cgit v1.2.3 From eb01597158ffb1853a7a7fc2c57d4c844640f75e Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 4 Jul 2020 15:38:29 +0200 Subject: i2c: rcar: always clear ICSAR to avoid side effects On R-Car Gen2, we get a timeout when reading from the address set in ICSAR, even though the slave interface is disabled. Clearing it fixes this situation. Note that Gen3 is not affected. To reproduce: bind and undbind an I2C slave on some bus, run 'i2cdetect' on that bus. Fixes: de20d1857dd6 ("i2c: rcar: add slave support") Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-rcar.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index a45c4bf1ec01..2e3e1bb75013 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -868,6 +868,7 @@ static int rcar_unreg_slave(struct i2c_client *slave) /* disable irqs and ensure none is running before clearing ptr */ rcar_i2c_write(priv, ICSIER, 0); rcar_i2c_write(priv, ICSCR, 0); + rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */ synchronize_irq(priv->irq); priv->slave = NULL; @@ -969,6 +970,8 @@ static int rcar_i2c_probe(struct platform_device *pdev) if (ret < 0) goto out_pm_put; + rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */ + if (priv->devtype == I2C_RCAR_GEN3) { priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); if (!IS_ERR(priv->rstc)) { -- cgit v1.2.3 From 02b9aec59243c6240fc42884acc958602146ddf6 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 22 Jul 2020 15:00:21 -0700 Subject: i2c: i2c-qcom-geni: Fix DMA transfer race When I have KASAN enabled on my kernel and I start stressing the touchscreen my system tends to hang. The touchscreen is one of the only things that does a lot of big i2c transfers and ends up hitting the DMA paths in the geni i2c driver. It appears that KASAN adds enough delay in my system to tickle a race condition in the DMA setup code. When the system hangs, I found that it was running the geni_i2c_irq() over and over again. It had these: m_stat = 0x04000080 rx_st = 0x30000011 dm_tx_st = 0x00000000 dm_rx_st = 0x00000000 dma = 0x00000001 Notably we're in DMA mode but are getting M_RX_IRQ_EN and M_RX_FIFO_WATERMARK_EN over and over again. Putting some traces in geni_i2c_rx_one_msg() showed that when we failed we were getting to the start of geni_i2c_rx_one_msg() but were never executing geni_se_rx_dma_prep(). I believe that the problem here is that we are starting the geni command before we run geni_se_rx_dma_prep(). If a transfer makes it far enough before we do that then we get into the state I have observed. Let's change the order, which seems to work fine. Although problems were seen on the RX path, code inspection suggests that the TX should be changed too. Change it as well. Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Douglas Anderson Tested-by: Sai Prakash Ranjan Reviewed-by: Akash Asthana Reviewed-by: Stephen Boyd Reviewed-by: Mukesh Kumar Savaliya Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-qcom-geni.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 18d1e4fd4cf3..7f130829bf01 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -367,7 +367,6 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, geni_se_select_mode(se, GENI_SE_FIFO); writel_relaxed(len, se->base + SE_I2C_RX_TRANS_LEN); - geni_se_setup_m_cmd(se, I2C_READ, m_param); if (dma_buf && geni_se_rx_dma_prep(se, dma_buf, len, &rx_dma)) { geni_se_select_mode(se, GENI_SE_FIFO); @@ -375,6 +374,8 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, dma_buf = NULL; } + geni_se_setup_m_cmd(se, I2C_READ, m_param); + time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT); if (!time_left) geni_i2c_abort_xfer(gi2c); @@ -408,7 +409,6 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, geni_se_select_mode(se, GENI_SE_FIFO); writel_relaxed(len, se->base + SE_I2C_TX_TRANS_LEN); - geni_se_setup_m_cmd(se, I2C_WRITE, m_param); if (dma_buf && geni_se_tx_dma_prep(se, dma_buf, len, &tx_dma)) { geni_se_select_mode(se, GENI_SE_FIFO); @@ -416,6 +416,8 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, dma_buf = NULL; } + geni_se_setup_m_cmd(se, I2C_WRITE, m_param); + if (!dma_buf) /* Get FIFO IRQ */ writel_relaxed(1, se->base + SE_GENI_TX_WATERMARK_REG); -- cgit v1.2.3 From 0e6705182d4e1b77248a93470d6d7b3013d59b30 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 23 Jul 2020 14:41:29 -0500 Subject: Revert "cifs: Fix the target file was deleted when rename failed." This reverts commit 9ffad9263b467efd8f8dc7ae1941a0a655a2bab2. Upon additional testing with older servers, it was found that the original commit introduced a regression when using the old SMB1 dialect and rsyncing over an existing file. The patch will need to be respun to address this, likely including a larger refactoring of the SMB1 and SMB3 rename code paths to make it less confusing and also to address some additional rename error cases that SMB3 may be able to workaround. Signed-off-by: Steve French Reported-by: Patrick Fernie CC: Stable Acked-by: Ronnie Sahlberg Acked-by: Pavel Shilovsky Acked-by: Zhang Xiaoxu --- fs/cifs/inode.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 49c3ea8aa845..ce95801e9b66 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -2044,7 +2044,6 @@ cifs_rename2(struct inode *source_dir, struct dentry *source_dentry, FILE_UNIX_BASIC_INFO *info_buf_target; unsigned int xid; int rc, tmprc; - bool new_target = d_really_is_negative(target_dentry); if (flags & ~RENAME_NOREPLACE) return -EINVAL; @@ -2121,13 +2120,8 @@ cifs_rename2(struct inode *source_dir, struct dentry *source_dentry, */ unlink_target: - /* - * If the target dentry was created during the rename, try - * unlinking it if it's not negative - */ - if (new_target && - d_really_is_positive(target_dentry) && - (rc == -EACCES || rc == -EEXIST)) { + /* Try unlinking the target dentry if it's not negative */ + if (d_really_is_positive(target_dentry) && (rc == -EACCES || rc == -EEXIST)) { if (d_is_dir(target_dentry)) tmprc = cifs_rmdir(target_dir, target_dentry); else -- cgit v1.2.3 From c75d1d5248c0c97996051809ad0e9f154ba5d76e Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Wed, 22 Jul 2020 16:31:54 -0700 Subject: bonding: check return value of register_netdevice() in bond_newlink() Very similar to commit 544f287b8495 ("bonding: check error value of register_netdevice() immediately"), we should immediately check the return value of register_netdevice() before doing anything else. Fixes: 005db31d5f5f ("bonding: set carrier off for devices created through netlink") Reported-and-tested-by: syzbot+bbc3a11c4da63c1b74d6@syzkaller.appspotmail.com Cc: Beniamino Galvani Cc: Taehee Yoo Cc: Jay Vosburgh Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/bonding/bond_netlink.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c index b43b51646b11..f0f9138e967f 100644 --- a/drivers/net/bonding/bond_netlink.c +++ b/drivers/net/bonding/bond_netlink.c @@ -456,11 +456,10 @@ static int bond_newlink(struct net *src_net, struct net_device *bond_dev, return err; err = register_netdevice(bond_dev); - - netif_carrier_off(bond_dev); if (!err) { struct bonding *bond = netdev_priv(bond_dev); + netif_carrier_off(bond_dev); bond_work_init_all(bond); } -- cgit v1.2.3 From 32818c075c54bb0cae44dd6f7ab00b01c52b8372 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Wed, 22 Jul 2020 18:56:25 -0700 Subject: geneve: fix an uninitialized value in geneve_changelink() geneve_nl2info() sets 'df' conditionally, so we have to initialize it by copying the value from existing geneve device in geneve_changelink(). Fixes: 56c09de347e4 ("geneve: allow changing DF behavior after creation") Reported-by: syzbot+7ebc2e088af5e4c0c9fa@syzkaller.appspotmail.com Cc: Sabrina Dubroca Signed-off-by: Cong Wang Reviewed-by: Sabrina Dubroca Signed-off-by: David S. Miller --- drivers/net/geneve.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 4661ef865807..dec52b763d50 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1615,11 +1615,11 @@ static int geneve_changelink(struct net_device *dev, struct nlattr *tb[], struct netlink_ext_ack *extack) { struct geneve_dev *geneve = netdev_priv(dev); + enum ifla_geneve_df df = geneve->df; struct geneve_sock *gs4, *gs6; struct ip_tunnel_info info; bool metadata; bool use_udp6_rx_checksums; - enum ifla_geneve_df df; bool ttl_inherit; int err; -- cgit v1.2.3 From 062d3f95b630113e1156a31f376ad36e25da29a7 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 23 Jul 2020 21:10:42 +0100 Subject: sched: Warn if garbage is passed to default_wake_function() Since the default_wake_function() passes its flags onto try_to_wake_up(), warn if those flags collide with internal values. Given that the supplied flags are garbage, no repair can be done but at least alert the user to the damage they are causing. In the belief that these errors should be picked up during testing, the warning is only compiled in under CONFIG_SCHED_DEBUG. Signed-off-by: Chris Wilson Signed-off-by: Ingo Molnar Acked-by: Peter Zijlstra Link: https://lore.kernel.org/r/20200723201042.18861-1-chris@chris-wilson.co.uk --- kernel/sched/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 5dece9b34e25..2142c6767682 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4485,6 +4485,7 @@ asmlinkage __visible void __sched preempt_schedule_irq(void) int default_wake_function(wait_queue_entry_t *curr, unsigned mode, int wake_flags, void *key) { + WARN_ON_ONCE(IS_ENABLED(CONFIG_SCHED_DEBUG) && wake_flags & ~WF_SYNC); return try_to_wake_up(curr->private, mode, wake_flags); } EXPORT_SYMBOL(default_wake_function); -- cgit v1.2.3 From fe5ed7ab99c656bd2f5b79b49df0e9ebf2cead8a Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 23 Jul 2020 17:44:20 +0200 Subject: uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression If a tracee is uprobed and it hits int3 inserted by debugger, handle_swbp() does send_sig(SIGTRAP, current, 0) which means si_code == SI_USER. This used to work when this code was written, but then GDB started to validate si_code and now it simply can't use breakpoints if the tracee has an active uprobe: # cat test.c void unused_func(void) { } int main(void) { return 0; } # gcc -g test.c -o test # perf probe -x ./test -a unused_func # perf record -e probe_test:unused_func gdb ./test -ex run GNU gdb (GDB) 10.0.50.20200714-git ... Program received signal SIGTRAP, Trace/breakpoint trap. 0x00007ffff7ddf909 in dl_main () from /lib64/ld-linux-x86-64.so.2 (gdb) The tracee hits the internal breakpoint inserted by GDB to monitor shared library events but GDB misinterprets this SIGTRAP and reports a signal. Change handle_swbp() to use force_sig(SIGTRAP), this matches do_int3_user() and fixes the problem. This is the minimal fix for -stable, arch/x86/kernel/uprobes.c is equally wrong; it should use send_sigtrap(TRAP_TRACE) instead of send_sig(SIGTRAP), but this doesn't confuse GDB and needs another x86-specific patch. Reported-by: Aaron Merey Signed-off-by: Oleg Nesterov Signed-off-by: Ingo Molnar Reviewed-by: Srikar Dronamraju Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200723154420.GA32043@redhat.com --- kernel/events/uprobes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index bb0862873dba..5f8b0c52fd2e 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -2199,7 +2199,7 @@ static void handle_swbp(struct pt_regs *regs) if (!uprobe) { if (is_swbp > 0) { /* No matching uprobe; signal SIGTRAP. */ - send_sig(SIGTRAP, current, 0); + force_sig(SIGTRAP); } else { /* * Either we raced with uprobe_unregister() or we can't -- cgit v1.2.3 From 246c320a8cfe0b11d81a4af38fa9985ef0cc9a4c Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Thu, 23 Jul 2020 21:15:11 -0700 Subject: mm/mmap.c: close race between munmap() and expand_upwards()/downwards() VMA with VM_GROWSDOWN or VM_GROWSUP flag set can change their size under mmap_read_lock(). It can lead to race with __do_munmap(): Thread A Thread B __do_munmap() detach_vmas_to_be_unmapped() mmap_write_downgrade() expand_downwards() vma->vm_start = address; // The VMA now overlaps with // VMAs detached by the Thread A // page fault populates expanded part // of the VMA unmap_region() // Zaps pagetables partly // populated by Thread B Similar race exists for expand_upwards(). The fix is to avoid downgrading mmap_lock in __do_munmap() if detached VMAs are next to VM_GROWSDOWN or VM_GROWSUP VMA. [akpm@linux-foundation.org: s/mmap_sem/mmap_lock/ in comment] Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by: Jann Horn Signed-off-by: Kirill A. Shutemov Signed-off-by: Andrew Morton Reviewed-by: Yang Shi Acked-by: Vlastimil Babka Cc: Oleg Nesterov Cc: Matthew Wilcox Cc: [4.20+] Link: http://lkml.kernel.org/r/20200709105309.42495-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds --- mm/mmap.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/mm/mmap.c b/mm/mmap.c index 59a4682ebf3f..8c7ca737a19b 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -2620,7 +2620,7 @@ static void unmap_region(struct mm_struct *mm, * Create a list of vma's touched by the unmap, removing them from the mm's * vma list as we go.. */ -static void +static bool detach_vmas_to_be_unmapped(struct mm_struct *mm, struct vm_area_struct *vma, struct vm_area_struct *prev, unsigned long end) { @@ -2645,6 +2645,17 @@ detach_vmas_to_be_unmapped(struct mm_struct *mm, struct vm_area_struct *vma, /* Kill the cache */ vmacache_invalidate(mm); + + /* + * Do not downgrade mmap_lock if we are next to VM_GROWSDOWN or + * VM_GROWSUP VMA. Such VMAs can change their size under + * down_read(mmap_lock) and collide with the VMA we are about to unmap. + */ + if (vma && (vma->vm_flags & VM_GROWSDOWN)) + return false; + if (prev && (prev->vm_flags & VM_GROWSUP)) + return false; + return true; } /* @@ -2825,7 +2836,8 @@ int __do_munmap(struct mm_struct *mm, unsigned long start, size_t len, } /* Detach vmas from rbtree */ - detach_vmas_to_be_unmapped(mm, vma, prev, end); + if (!detach_vmas_to_be_unmapped(mm, vma, prev, end)) + downgrade = false; if (downgrade) mmap_write_downgrade(mm); -- cgit v1.2.3 From 3bef735ad7b7d987069181e7b58588043cbd1509 Mon Sep 17 00:00:00 2001 From: Chengguang Xu Date: Thu, 23 Jul 2020 21:15:14 -0700 Subject: vfs/xattr: mm/shmem: kernfs: release simple xattr entry in a right way After commit fdc85222d58e ("kernfs: kvmalloc xattr value instead of kmalloc"), simple xattr entry is allocated with kvmalloc() instead of kmalloc(), so we should release it with kvfree() instead of kfree(). Fixes: fdc85222d58e ("kernfs: kvmalloc xattr value instead of kmalloc") Signed-off-by: Chengguang Xu Signed-off-by: Andrew Morton Acked-by: Hugh Dickins Acked-by: Tejun Heo Cc: Daniel Xu Cc: Chris Down Cc: Andreas Dilger Cc: Greg Kroah-Hartman Cc: Al Viro Cc: [5.7] Link: http://lkml.kernel.org/r/20200704051608.15043-1-cgxu519@mykernel.net Signed-off-by: Linus Torvalds --- include/linux/xattr.h | 3 ++- mm/shmem.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/include/linux/xattr.h b/include/linux/xattr.h index 47eaa34f8761..c5afaf8ca7a2 100644 --- a/include/linux/xattr.h +++ b/include/linux/xattr.h @@ -15,6 +15,7 @@ #include #include #include +#include #include struct inode; @@ -94,7 +95,7 @@ static inline void simple_xattrs_free(struct simple_xattrs *xattrs) list_for_each_entry_safe(xattr, node, &xattrs->head, list) { kfree(xattr->name); - kfree(xattr); + kvfree(xattr); } } diff --git a/mm/shmem.c b/mm/shmem.c index a0dbe62f8042..b2abca3f7f33 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -3178,7 +3178,7 @@ static int shmem_initxattrs(struct inode *inode, new_xattr->name = kmalloc(XATTR_SECURITY_PREFIX_LEN + len, GFP_KERNEL); if (!new_xattr->name) { - kfree(new_xattr); + kvfree(new_xattr); return -ENOMEM; } -- cgit v1.2.3 From 45779b036d3d2870633443a9f9bd03c177befbf5 Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Thu, 23 Jul 2020 21:15:18 -0700 Subject: mm: initialize return of vm_insert_pages clang static analysis reports a garbage return In file included from mm/memory.c:84: mm/memory.c:1612:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return err; ^~~~~~~~~~ The setting of err depends on a loop executing. So initialize err. Signed-off-by: Tom Rix Signed-off-by: Andrew Morton Link: http://lkml.kernel.org/r/20200703155354.29132-1-trix@redhat.com Signed-off-by: Linus Torvalds --- mm/memory.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memory.c b/mm/memory.c index 87ec87cdc1ff..3ecad55103ad 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1601,7 +1601,7 @@ int vm_insert_pages(struct vm_area_struct *vma, unsigned long addr, return insert_pages(vma, addr, pages, num, vma->vm_page_prot); #else unsigned long idx = 0, pgcount = *num; - int err; + int err = -EINVAL; for (; idx < pgcount; ++idx) { err = vm_insert_page(vma, addr + (PAGE_SIZE * idx), pages[idx]); -- cgit v1.2.3 From 82ff165cd35110d4e380b55927bbd74dcb564998 Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Thu, 23 Jul 2020 21:15:21 -0700 Subject: mm/memcontrol: fix OOPS inside mem_cgroup_get_nr_swap_pages() Prabhakar reported an OOPS inside mem_cgroup_get_nr_swap_pages() function in a corner case seen on some arm64 boards when kdump kernel runs with "cgroup_disable=memory" passed to the kdump kernel via bootargs. The root-cause behind the same is that currently mem_cgroup_swap_init() function is implemented as a subsys_initcall() call instead of a core_initcall(), this means 'cgroup_memory_noswap' still remains set to the default value (false) even when memcg is disabled via "cgroup_disable=memory" boot parameter. This may result in premature OOPS inside mem_cgroup_get_nr_swap_pages() function in corner cases: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 [0000000000000188] user address but active_mm is swapper Internal error: Oops: 96000006 [#1] SMP Modules linked in: <..snip..> Call trace: mem_cgroup_get_nr_swap_pages+0x9c/0xf4 shrink_lruvec+0x404/0x4f8 shrink_node+0x1a8/0x688 do_try_to_free_pages+0xe8/0x448 try_to_free_pages+0x110/0x230 __alloc_pages_slowpath.constprop.106+0x2b8/0xb48 __alloc_pages_nodemask+0x2ac/0x2f8 alloc_page_interleave+0x20/0x90 alloc_pages_current+0xdc/0xf8 atomic_pool_expand+0x60/0x210 __dma_atomic_pool_init+0x50/0xa4 dma_atomic_pool_init+0xac/0x158 do_one_initcall+0x50/0x218 kernel_init_freeable+0x22c/0x2d0 kernel_init+0x18/0x110 ret_from_fork+0x10/0x18 Code: aa1403e3 91106000 97f82a27 14000011 (f940c663) ---[ end trace 9795948475817de4 ]--- Kernel panic - not syncing: Fatal exception Rebooting in 10 seconds.. Fixes: eccb52e78809 ("mm: memcontrol: prepare swap controller setup for integration") Reported-by: Prabhakar Kushwaha Signed-off-by: Bhupesh Sharma Signed-off-by: Andrew Morton Acked-by: Michal Hocko Cc: Johannes Weiner Cc: Vladimir Davydov Cc: James Morse Cc: Mark Rutland Cc: Will Deacon Cc: Catalin Marinas Link: http://lkml.kernel.org/r/1593641660-13254-2-git-send-email-bhsharma@redhat.com Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 19622328e4b5..c75c4face02e 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -7186,6 +7186,13 @@ static struct cftype memsw_files[] = { { }, /* terminate */ }; +/* + * If mem_cgroup_swap_init() is implemented as a subsys_initcall() + * instead of a core_initcall(), this could mean cgroup_memory_noswap still + * remains set to false even when memcg is disabled via "cgroup_disable=memory" + * boot parameter. This may result in premature OOPS inside + * mem_cgroup_get_nr_swap_pages() function in corner cases. + */ static int __init mem_cgroup_swap_init(void) { /* No memory control -> no swap control */ @@ -7200,6 +7207,6 @@ static int __init mem_cgroup_swap_init(void) return 0; } -subsys_initcall(mem_cgroup_swap_init); +core_initcall(mem_cgroup_swap_init); #endif /* CONFIG_MEMCG_SWAP */ -- cgit v1.2.3 From 8d22a9351035ef2ff12ef163a1091b8b8cf1e49c Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 23 Jul 2020 21:15:24 -0700 Subject: mm/memcg: fix refcount error while moving and swapping It was hard to keep a test running, moving tasks between memcgs with move_charge_at_immigrate, while swapping: mem_cgroup_id_get_many()'s refcount is discovered to be 0 (supposedly impossible), so it is then forced to REFCOUNT_SATURATED, and after thousands of warnings in quick succession, the test is at last put out of misery by being OOM killed. This is because of the way moved_swap accounting was saved up until the task move gets completed in __mem_cgroup_clear_mc(), deferred from when mem_cgroup_move_swap_account() actually exchanged old and new ids. Concurrent activity can free up swap quicker than the task is scanned, bringing id refcount down 0 (which should only be possible when offlining). Just skip that optimization: do that part of the accounting immediately. Fixes: 615d66c37c75 ("mm: memcontrol: fix memcg id ref counter on swap charge move") Signed-off-by: Hugh Dickins Signed-off-by: Andrew Morton Reviewed-by: Alex Shi Cc: Johannes Weiner Cc: Alex Shi Cc: Shakeel Butt Cc: Michal Hocko Cc: Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2007071431050.4726@eggly.anvils Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index c75c4face02e..13f559af1ab6 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -5669,7 +5669,6 @@ static void __mem_cgroup_clear_mc(void) if (!mem_cgroup_is_root(mc.to)) page_counter_uncharge(&mc.to->memory, mc.moved_swap); - mem_cgroup_id_get_many(mc.to, mc.moved_swap); css_put_many(&mc.to->css, mc.moved_swap); mc.moved_swap = 0; @@ -5860,7 +5859,8 @@ put: /* get_mctgt_type() gets the page */ ent = target.ent; if (!mem_cgroup_move_swap_account(ent, mc.from, mc.to)) { mc.precharge--; - /* we fixup refcnts and charges later. */ + mem_cgroup_id_get_many(mc.to, 1); + /* we fixup other refcnts and charges later. */ mc.moved_swap++; } break; -- cgit v1.2.3 From d38a2b7a9c939e6d7329ab92b96559ccebf7b135 Mon Sep 17 00:00:00 2001 From: Muchun Song Date: Thu, 23 Jul 2020 21:15:27 -0700 Subject: mm: memcg/slab: fix memory leak at non-root kmem_cache destroy If the kmem_cache refcount is greater than one, we should not mark the root kmem_cache as dying. If we mark the root kmem_cache dying incorrectly, the non-root kmem_cache can never be destroyed. It resulted in memory leak when memcg was destroyed. We can use the following steps to reproduce. 1) Use kmem_cache_create() to create a new kmem_cache named A. 2) Coincidentally, the kmem_cache A is an alias for kmem_cache B, so the refcount of B is just increased. 3) Use kmem_cache_destroy() to destroy the kmem_cache A, just decrease the B's refcount but mark the B as dying. 4) Create a new memory cgroup and alloc memory from the kmem_cache B. It leads to create a non-root kmem_cache for allocating memory. 5) When destroy the memory cgroup created in the step 4), the non-root kmem_cache can never be destroyed. If we repeat steps 4) and 5), this will cause a lot of memory leak. So only when refcount reach zero, we mark the root kmem_cache as dying. Fixes: 92ee383f6daa ("mm: fix race between kmem_cache destroy, create and deactivate") Signed-off-by: Muchun Song Signed-off-by: Andrew Morton Reviewed-by: Shakeel Butt Acked-by: Roman Gushchin Cc: Vlastimil Babka Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Shakeel Butt Cc: Link: http://lkml.kernel.org/r/20200716165103.83462-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds --- mm/slab_common.c | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-) diff --git a/mm/slab_common.c b/mm/slab_common.c index 37d48a56431d..fe8b68482670 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -326,6 +326,14 @@ int slab_unmergeable(struct kmem_cache *s) if (s->refcount < 0) return 1; +#ifdef CONFIG_MEMCG_KMEM + /* + * Skip the dying kmem_cache. + */ + if (s->memcg_params.dying) + return 1; +#endif + return 0; } @@ -886,12 +894,15 @@ static int shutdown_memcg_caches(struct kmem_cache *s) return 0; } -static void flush_memcg_workqueue(struct kmem_cache *s) +static void memcg_set_kmem_cache_dying(struct kmem_cache *s) { spin_lock_irq(&memcg_kmem_wq_lock); s->memcg_params.dying = true; spin_unlock_irq(&memcg_kmem_wq_lock); +} +static void flush_memcg_workqueue(struct kmem_cache *s) +{ /* * SLAB and SLUB deactivate the kmem_caches through call_rcu. Make * sure all registered rcu callbacks have been invoked. @@ -923,10 +934,6 @@ static inline int shutdown_memcg_caches(struct kmem_cache *s) { return 0; } - -static inline void flush_memcg_workqueue(struct kmem_cache *s) -{ -} #endif /* CONFIG_MEMCG_KMEM */ void slab_kmem_cache_release(struct kmem_cache *s) @@ -944,8 +951,6 @@ void kmem_cache_destroy(struct kmem_cache *s) if (unlikely(!s)) return; - flush_memcg_workqueue(s); - get_online_cpus(); get_online_mems(); @@ -955,6 +960,22 @@ void kmem_cache_destroy(struct kmem_cache *s) if (s->refcount) goto out_unlock; +#ifdef CONFIG_MEMCG_KMEM + memcg_set_kmem_cache_dying(s); + + mutex_unlock(&slab_mutex); + + put_online_mems(); + put_online_cpus(); + + flush_memcg_workqueue(s); + + get_online_cpus(); + get_online_mems(); + + mutex_lock(&slab_mutex); +#endif + err = shutdown_memcg_caches(s); if (!err) err = shutdown_cache(s); -- cgit v1.2.3 From dbda8feadfa46b3d8dd7a2304f84ccbc036effe9 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 23 Jul 2020 21:15:30 -0700 Subject: mm/hugetlb: avoid hardcoding while checking if cma is enabled hugetlb_cma[0] can be NULL due to various reasons, for example, node0 has no memory. so NULL hugetlb_cma[0] doesn't necessarily mean cma is not enabled. gigantic pages might have been reserved on other nodes. This patch fixes possible double reservation and CMA leak. [akpm@linux-foundation.org: fix CONFIG_CMA=n warning] [sfr@canb.auug.org.au: better checks before using hugetlb_cma] Link: http://lkml.kernel.org/r/20200721205716.6dbaa56b@canb.auug.org.au Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Barry Song Signed-off-by: Andrew Morton Reviewed-by: Mike Kravetz Acked-by: Roman Gushchin Cc: Jonathan Cameron Cc: Link: http://lkml.kernel.org/r/20200710005726.36068-1-song.bao.hua@hisilicon.com Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index fab4485b9e52..590111ea6975 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -45,7 +45,10 @@ int hugetlb_max_hstate __read_mostly; unsigned int default_hstate_idx; struct hstate hstates[HUGE_MAX_HSTATE]; +#ifdef CONFIG_CMA static struct cma *hugetlb_cma[MAX_NUMNODES]; +#endif +static unsigned long hugetlb_cma_size __initdata; /* * Minimum page order among possible hugepage sizes, set to a proper value @@ -1235,9 +1238,10 @@ static void free_gigantic_page(struct page *page, unsigned int order) * If the page isn't allocated using the cma allocator, * cma_release() returns false. */ - if (IS_ENABLED(CONFIG_CMA) && - cma_release(hugetlb_cma[page_to_nid(page)], page, 1 << order)) +#ifdef CONFIG_CMA + if (cma_release(hugetlb_cma[page_to_nid(page)], page, 1 << order)) return; +#endif free_contig_range(page_to_pfn(page), 1 << order); } @@ -1248,7 +1252,8 @@ static struct page *alloc_gigantic_page(struct hstate *h, gfp_t gfp_mask, { unsigned long nr_pages = 1UL << huge_page_order(h); - if (IS_ENABLED(CONFIG_CMA)) { +#ifdef CONFIG_CMA + { struct page *page; int node; @@ -1262,6 +1267,7 @@ static struct page *alloc_gigantic_page(struct hstate *h, gfp_t gfp_mask, return page; } } +#endif return alloc_contig_pages(nr_pages, gfp_mask, nid, nodemask); } @@ -2571,7 +2577,7 @@ static void __init hugetlb_hstate_alloc_pages(struct hstate *h) for (i = 0; i < h->max_huge_pages; ++i) { if (hstate_is_gigantic(h)) { - if (IS_ENABLED(CONFIG_CMA) && hugetlb_cma[0]) { + if (hugetlb_cma_size) { pr_warn_once("HugeTLB: hugetlb_cma is enabled, skip boot time allocation\n"); break; } @@ -5654,7 +5660,6 @@ void move_hugetlb_state(struct page *oldpage, struct page *newpage, int reason) } #ifdef CONFIG_CMA -static unsigned long hugetlb_cma_size __initdata; static bool cma_reserve_called __initdata; static int __init cmdline_parse_hugetlb_cma(char *p) -- cgit v1.2.3 From 594cced14ad3903166c8b091ff96adac7552f0b3 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Thu, 23 Jul 2020 21:15:34 -0700 Subject: khugepaged: fix null-pointer dereference due to race khugepaged has to drop mmap lock several times while collapsing a page. The situation can change while the lock is dropped and we need to re-validate that the VMA is still in place and the PMD is still subject for collapse. But we miss one corner case: while collapsing an anonymous pages the VMA could be replaced with file VMA. If the file VMA doesn't have any private pages we get NULL pointer dereference: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] anon_vma_lock_write include/linux/rmap.h:120 [inline] collapse_huge_page mm/khugepaged.c:1110 [inline] khugepaged_scan_pmd mm/khugepaged.c:1349 [inline] khugepaged_scan_mm_slot mm/khugepaged.c:2110 [inline] khugepaged_do_scan mm/khugepaged.c:2193 [inline] khugepaged+0x3bba/0x5a10 mm/khugepaged.c:2238 The fix is to make sure that the VMA is anonymous in hugepage_vma_revalidate(). The helper is only used for collapsing anonymous pages. Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Reported-by: syzbot+ed318e8b790ca72c5ad0@syzkaller.appspotmail.com Signed-off-by: Kirill A. Shutemov Signed-off-by: Andrew Morton Reviewed-by: David Hildenbrand Acked-by: Yang Shi Cc: Link: http://lkml.kernel.org/r/20200722121439.44328-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds --- mm/khugepaged.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/khugepaged.c b/mm/khugepaged.c index b043c40a21d4..700f5160f3e4 100644 --- a/mm/khugepaged.c +++ b/mm/khugepaged.c @@ -958,6 +958,9 @@ static int hugepage_vma_revalidate(struct mm_struct *mm, unsigned long address, return SCAN_ADDRESS_RANGE; if (!hugepage_vma_check(vma, vma->vm_flags)) return SCAN_VMA_CHECK; + /* Anon VMA expected */ + if (!vma->anon_vma || vma->vm_ops) + return SCAN_VMA_CHECK; return 0; } -- cgit v1.2.3 From e57942c5630f86880f2cefa61f4a1ab10d4864af Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 23 Jul 2020 21:15:37 -0700 Subject: mailmap: add entry for Mike Rapoport Add an entry to correct my email addresses. Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Link: http://lkml.kernel.org/r/20200708095414.12275-1-rppt@kernel.org Signed-off-by: Linus Torvalds --- .mailmap | 3 +++ 1 file changed, 3 insertions(+) diff --git a/.mailmap b/.mailmap index 6da12dfd10dc..db4f2295bd9d 100644 --- a/.mailmap +++ b/.mailmap @@ -198,6 +198,9 @@ Maxime Ripard Mayuresh Janorkar Michael Buesch Michel Dänzer +Mike Rapoport +Mike Rapoport +Mike Rapoport Miodrag Dinic Miquel Raynal Mitesh shah -- cgit v1.2.3 From 2910c59fd0423f87aca3a669b156a2325da63745 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Thu, 23 Jul 2020 21:15:40 -0700 Subject: squashfs: fix length field overlap check in metadata reading This is a regression introduced by the "migrate from ll_rw_block usage to BIO" patch. Squashfs packs structures on byte boundaries, and due to that the length field (of the metadata block) may not be fully in the current block. The new code rewrote and introduced a faulty check for that edge case. Fixes: 93e72b3c612adcaca1 ("squashfs: migrate from ll_rw_block usage to BIO") Reported-by: Bernd Amend Signed-off-by: Phillip Lougher Signed-off-by: Andrew Morton Cc: Christoph Hellwig Cc: Adrien Schildknecht Cc: Guenter Roeck Cc: Daniel Rosenberg Link: http://lkml.kernel.org/r/20200717195536.16069-1-phillip@squashfs.org.uk Signed-off-by: Linus Torvalds --- fs/squashfs/block.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/squashfs/block.c b/fs/squashfs/block.c index 64f61330564a..76bb1c846845 100644 --- a/fs/squashfs/block.c +++ b/fs/squashfs/block.c @@ -175,7 +175,7 @@ int squashfs_read_data(struct super_block *sb, u64 index, int length, /* Extract the length of the metadata block */ data = page_address(bvec->bv_page) + bvec->bv_offset; length = data[offset]; - if (offset <= bvec->bv_len - 1) { + if (offset < bvec->bv_len - 1) { length |= data[offset + 1] << 8; } else { if (WARN_ON_ONCE(!bio_next_segment(bio, &iter_all))) { -- cgit v1.2.3 From d178770d8d21489abf5bafefcbb6d5243b482e9a Mon Sep 17 00:00:00 2001 From: Pi-Hsun Shih Date: Thu, 23 Jul 2020 21:15:43 -0700 Subject: scripts/decode_stacktrace: strip basepath from all paths Currently the basepath is removed only from the beginning of the string. When the symbol is inlined and there's multiple line outputs of addr2line, only the first line would have basepath removed. Change to remove the basepath prefix from all lines. Fixes: 31013836a71e ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex") Co-developed-by: Shik Chen Signed-off-by: Pi-Hsun Shih Signed-off-by: Shik Chen Signed-off-by: Andrew Morton Reviewed-by: Stephen Boyd Cc: Sasha Levin Cc: Nicolas Boichat Cc: Jiri Slaby Link: http://lkml.kernel.org/r/20200720082709.252805-1-pihsun@chromium.org Signed-off-by: Linus Torvalds --- scripts/decode_stacktrace.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/decode_stacktrace.sh b/scripts/decode_stacktrace.sh index 66a6d511b524..0869def435ee 100755 --- a/scripts/decode_stacktrace.sh +++ b/scripts/decode_stacktrace.sh @@ -87,8 +87,8 @@ parse_symbol() { return fi - # Strip out the base of the path - code=${code#$basepath/} + # Strip out the base of the path on each line + code=$(while read -r line; do echo "${line#$basepath/}"; done <<< "$code") # In the case of inlines, move everything to same line code=${code//$'\n'/' '} -- cgit v1.2.3 From e0b3e0b1a04367fc15c07f44e78361545b55357c Mon Sep 17 00:00:00 2001 From: "Michael J. Ruhl" Date: Thu, 23 Jul 2020 21:15:46 -0700 Subject: io-mapping: indicate mapping failure The !ATOMIC_IOMAP version of io_maping_init_wc will always return success, even when the ioremap fails. Since the ATOMIC_IOMAP version returns NULL when the init fails, and callers check for a NULL return on error this is unexpected. During a device probe, where the ioremap failed, a crash can look like this: BUG: unable to handle page fault for address: 0000000000210000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page Oops: 0002 [#1] PREEMPT SMP CPU: 0 PID: 177 Comm: RIP: 0010:fill_page_dma [i915] gen8_ppgtt_create [i915] i915_ppgtt_create [i915] intel_gt_init [i915] i915_gem_init [i915] i915_driver_probe [i915] pci_device_probe really_probe driver_probe_device The remap failure occurred much earlier in the probe. If it had been propagated, the driver would have exited with an error. Return NULL on ioremap failure. [akpm@linux-foundation.org: detect ioremap_wc() errors earlier] Fixes: cafaf14a5d8f ("io-mapping: Always create a struct to hold metadata about the io-mapping") Signed-off-by: Michael J. Ruhl Signed-off-by: Andrew Morton Reviewed-by: Andrew Morton Cc: Mike Rapoport Cc: Andy Shevchenko Cc: Chris Wilson Cc: Daniel Vetter Cc: Link: http://lkml.kernel.org/r/20200721171936.81563-1-michael.j.ruhl@intel.com Signed-off-by: Linus Torvalds --- include/linux/io-mapping.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index 0beaa3eba155..c75e4d3d8833 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -107,9 +107,12 @@ io_mapping_init_wc(struct io_mapping *iomap, resource_size_t base, unsigned long size) { + iomap->iomem = ioremap_wc(base, size); + if (!iomap->iomem) + return NULL; + iomap->base = base; iomap->size = size; - iomap->iomem = ioremap_wc(base, size); #if defined(pgprot_noncached_wc) /* archs can't agree on a name ... */ iomap->prot = pgprot_noncached_wc(PAGE_KERNEL); #elif defined(pgprot_writecombine) -- cgit v1.2.3 From bb9715379abfeddea86343b748b62410e20ef037 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov Date: Thu, 23 Jul 2020 21:15:49 -0700 Subject: MAINTAINERS: add KCOV section To link KCOV to the kasan-dev@ mailing list. Signed-off-by: Andrey Konovalov Signed-off-by: Andrew Morton Acked-by: Dmitry Vyukov Cc: Alexander Potapenko Cc: Marco Elver Link: http://lkml.kernel.org/r/5fa344db7ac4af2213049e5656c0f43d6ecaa379.1595331682.git.andreyknvl@google.com Signed-off-by: Linus Torvalds --- MAINTAINERS | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index e64cdde81851..ef39a48f63e4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9306,6 +9306,17 @@ F: Documentation/kbuild/kconfig* F: scripts/Kconfig.include F: scripts/kconfig/ +KCOV +R: Dmitry Vyukov +R: Andrey Konovalov +L: kasan-dev@googlegroups.com +S: Maintained +F: Documentation/dev-tools/kcov.rst +F: include/linux/kcov.h +F: include/uapi/linux/kcov.h +F: kernel/kcov.c +F: scripts/Makefile.kcov + KCSAN M: Marco Elver R: Dmitry Vyukov -- cgit v1.2.3 From 7359608a271ce81803de148befefd309baf88c76 Mon Sep 17 00:00:00 2001 From: Stefano Garzarella Date: Thu, 23 Jul 2020 21:15:52 -0700 Subject: scripts/gdb: fix lx-symbols 'gdb.error' while loading modules Commit ed66f991bb19 ("module: Refactor section attr into bin attribute") removed the 'name' field from 'struct module_sect_attr' triggering the following error when invoking lx-symbols: (gdb) lx-symbols loading vmlinux scanning for modules in linux/build loading @0xffffffffc014f000: linux/build/drivers/net/tun.ko Python Exception There is no member named name.: Error occurred in Python: There is no member named name. This patch fixes the issue taking the module name from the 'struct attribute'. Fixes: ed66f991bb19 ("module: Refactor section attr into bin attribute") Signed-off-by: Stefano Garzarella Signed-off-by: Andrew Morton Reviewed-by: Jan Kiszka Reviewed-by: Kieran Bingham Link: http://lkml.kernel.org/r/20200722102239.313231-1-sgarzare@redhat.com Signed-off-by: Linus Torvalds --- scripts/gdb/linux/symbols.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/gdb/linux/symbols.py b/scripts/gdb/linux/symbols.py index be984aa29b75..1be9763cf8bb 100644 --- a/scripts/gdb/linux/symbols.py +++ b/scripts/gdb/linux/symbols.py @@ -96,7 +96,7 @@ lx-symbols command.""" return "" attrs = sect_attrs['attrs'] section_name_to_address = { - attrs[n]['name'].string(): attrs[n]['address'] + attrs[n]['battr']['attr']['name'].string(): attrs[n]['address'] for n in range(int(sect_attrs['nsections']))} args = [] for section_name in [".data", ".data..read_mostly", ".rodata", ".bss", -- cgit v1.2.3 From c2b69f24ebd166a13cdc9909b50f33228895998b Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 24 Jul 2020 10:50:22 +1000 Subject: flow_offload: Move rhashtable inclusion to the source file I noticed that touching linux/rhashtable.h causes lib/vsprintf.c to be rebuilt. This dependency came through a bogus inclusion in the file net/flow_offload.h. This patch moves it to the right place. This patch also removes a lingering rhashtable inclusion in cls_api created by the same commit. Fixes: 4e481908c51b ("flow_offload: move tc indirect block to...") Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/net/flow_offload.h | 1 - net/core/flow_offload.c | 1 + net/sched/cls_api.c | 1 - 3 files changed, 1 insertion(+), 2 deletions(-) diff --git a/include/net/flow_offload.h b/include/net/flow_offload.h index 6315324b9dc2..3eaf25f68b79 100644 --- a/include/net/flow_offload.h +++ b/include/net/flow_offload.h @@ -5,7 +5,6 @@ #include #include #include -#include struct flow_match { struct flow_dissector *dissector; diff --git a/net/core/flow_offload.c b/net/core/flow_offload.c index b739cfab796e..2076219b8ba5 100644 --- a/net/core/flow_offload.c +++ b/net/core/flow_offload.c @@ -4,6 +4,7 @@ #include #include #include +#include struct flow_rule *flow_rule_alloc(unsigned int num_actions) { diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index e62beec0d844..4619cb3cb0a8 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From c2c633106453611be07821f53dff9e93a9d1c3f0 Mon Sep 17 00:00:00 2001 From: Andrea Righi Date: Fri, 24 Jul 2020 10:59:10 +0200 Subject: xen-netfront: fix potential deadlock in xennet_remove() There's a potential race in xennet_remove(); this is what the driver is doing upon unregistering a network device: 1. state = read bus state 2. if state is not "Closed": 3. request to set state to "Closing" 4. wait for state to be set to "Closing" 5. request to set state to "Closed" 6. wait for state to be set to "Closed" If the state changes to "Closed" immediately after step 1 we are stuck forever in step 4, because the state will never go back from "Closed" to "Closing". Make sure to check also for state == "Closed" in step 4 to prevent the deadlock. Also add a 5 sec timeout any time we wait for the bus state to change, to avoid getting stuck forever in wait_event(). Signed-off-by: Andrea Righi Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 64 ++++++++++++++++++++++++++++++---------------- 1 file changed, 42 insertions(+), 22 deletions(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 482c6c8b0fb7..88280057e032 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -63,6 +63,8 @@ module_param_named(max_queues, xennet_max_queues, uint, 0644); MODULE_PARM_DESC(max_queues, "Maximum number of queues per virtual interface"); +#define XENNET_TIMEOUT (5 * HZ) + static const struct ethtool_ops xennet_ethtool_ops; struct netfront_cb { @@ -1334,12 +1336,15 @@ static struct net_device *xennet_create_dev(struct xenbus_device *dev) netif_carrier_off(netdev); - xenbus_switch_state(dev, XenbusStateInitialising); - wait_event(module_wq, - xenbus_read_driver_state(dev->otherend) != - XenbusStateClosed && - xenbus_read_driver_state(dev->otherend) != - XenbusStateUnknown); + do { + xenbus_switch_state(dev, XenbusStateInitialising); + err = wait_event_timeout(module_wq, + xenbus_read_driver_state(dev->otherend) != + XenbusStateClosed && + xenbus_read_driver_state(dev->otherend) != + XenbusStateUnknown, XENNET_TIMEOUT); + } while (!err); + return netdev; exit: @@ -2139,28 +2144,43 @@ static const struct attribute_group xennet_dev_group = { }; #endif /* CONFIG_SYSFS */ -static int xennet_remove(struct xenbus_device *dev) +static void xennet_bus_close(struct xenbus_device *dev) { - struct netfront_info *info = dev_get_drvdata(&dev->dev); - - dev_dbg(&dev->dev, "%s\n", dev->nodename); + int ret; - if (xenbus_read_driver_state(dev->otherend) != XenbusStateClosed) { + if (xenbus_read_driver_state(dev->otherend) == XenbusStateClosed) + return; + do { xenbus_switch_state(dev, XenbusStateClosing); - wait_event(module_wq, - xenbus_read_driver_state(dev->otherend) == - XenbusStateClosing || - xenbus_read_driver_state(dev->otherend) == - XenbusStateUnknown); + ret = wait_event_timeout(module_wq, + xenbus_read_driver_state(dev->otherend) == + XenbusStateClosing || + xenbus_read_driver_state(dev->otherend) == + XenbusStateClosed || + xenbus_read_driver_state(dev->otherend) == + XenbusStateUnknown, + XENNET_TIMEOUT); + } while (!ret); + + if (xenbus_read_driver_state(dev->otherend) == XenbusStateClosed) + return; + do { xenbus_switch_state(dev, XenbusStateClosed); - wait_event(module_wq, - xenbus_read_driver_state(dev->otherend) == - XenbusStateClosed || - xenbus_read_driver_state(dev->otherend) == - XenbusStateUnknown); - } + ret = wait_event_timeout(module_wq, + xenbus_read_driver_state(dev->otherend) == + XenbusStateClosed || + xenbus_read_driver_state(dev->otherend) == + XenbusStateUnknown, + XENNET_TIMEOUT); + } while (!ret); +} + +static int xennet_remove(struct xenbus_device *dev) +{ + struct netfront_info *info = dev_get_drvdata(&dev->dev); + xennet_bus_close(dev); xennet_disconnect_backend(info); if (info->netdev->reg_state == NETREG_REGISTERED) -- cgit v1.2.3 From af9f691f0f5bdd1ade65a7b84927639882d7c3e5 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Fri, 24 Jul 2020 09:45:51 -0700 Subject: qrtr: orphan socket in qrtr_release() We have to detach sock from socket in qrtr_release(), otherwise skb->sk may still reference to this socket when the skb is released in tun->queue, particularly sk->sk_wq still points to &sock->wq, which leads to a UAF. Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com Fixes: 28fb4e59a47d ("net: qrtr: Expose tunneling endpoint to user space") Cc: Bjorn Andersson Cc: Eric Dumazet Signed-off-by: Cong Wang Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/qrtr/qrtr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/qrtr/qrtr.c b/net/qrtr/qrtr.c index 24a8c3c6da0d..300a104b9a0f 100644 --- a/net/qrtr/qrtr.c +++ b/net/qrtr/qrtr.c @@ -1180,6 +1180,7 @@ static int qrtr_release(struct socket *sock) sk->sk_state_change(sk); sock_set_flag(sk, SOCK_DEAD); + sock_orphan(sk); sock->sk = NULL; if (!sock_flag(sk, SOCK_ZAPPED)) -- cgit v1.2.3 From d0d8aae64566b753c4330fbd5944b88af035f299 Mon Sep 17 00:00:00 2001 From: Atish Patra Date: Wed, 15 Jul 2020 16:30:07 -0700 Subject: RISC-V: Set maximum number of mapped pages correctly Currently, maximum number of mapper pages are set to the pfn calculated from the memblock size of the memblock containing kernel. This will work until that memblock spans the entire memory. However, it will be set to a wrong value if there are multiple memblocks defined in kernel (e.g. with efi runtime services). Set the the maximum value to the pfn calculated from dram size. Signed-off-by: Atish Patra Signed-off-by: Palmer Dabbelt --- arch/riscv/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index f4adb3684f3d..8d22973bde40 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -150,9 +150,9 @@ void __init setup_bootmem(void) /* Reserve from the start of the kernel to the end of the kernel */ memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start); - set_max_mapnr(PFN_DOWN(mem_size)); max_pfn = PFN_DOWN(memblock_end_of_DRAM()); max_low_pfn = max_pfn; + set_max_mapnr(max_low_pfn); #ifdef CONFIG_BLK_DEV_INITRD setup_initrd(); -- cgit v1.2.3 From 7df5cb75cfb8acf96c7f2342530eb41e0c11f4c3 Mon Sep 17 00:00:00 2001 From: Subash Abhinov Kasiviswanathan Date: Thu, 23 Jul 2020 11:31:48 -0600 Subject: dev: Defer free of skbs in flush_backlog IRQs are disabled when freeing skbs in input queue. Use the IRQ safe variant to free skbs here. Fixes: 145dd5f9c88f ("net: flush the softnet backlog in process context") Signed-off-by: Subash Abhinov Kasiviswanathan Signed-off-by: David S. Miller --- net/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 90b59fc50dc9..7a774ebf64e2 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -5601,7 +5601,7 @@ static void flush_backlog(struct work_struct *work) skb_queue_walk_safe(&sd->input_pkt_queue, skb, tmp) { if (skb->dev->reg_state == NETREG_UNREGISTERING) { __skb_unlink(skb, &sd->input_pkt_queue); - kfree_skb(skb); + dev_kfree_skb_irq(skb); input_queue_head_incr(sd); } } -- cgit v1.2.3 From 8754e1379e7089516a449821f88e1fe1ebbae5e1 Mon Sep 17 00:00:00 2001 From: Xie He Date: Fri, 24 Jul 2020 09:33:47 -0700 Subject: drivers/net/wan: lapb: Corrected the usage of skb_cow This patch fixed 2 issues with the usage of skb_cow in LAPB drivers "lapbether" and "hdlc_x25": 1) After skb_cow fails, kfree_skb should be called to drop a reference to the skb. But in both drivers, kfree_skb is not called. 2) skb_cow should be called before skb_push so that is can ensure the safety of skb_push. But in "lapbether", it is incorrectly called after skb_push. More details about these 2 issues: 1) The behavior of calling kfree_skb on failure is also the behavior of netif_rx, which is called by this function with "return netif_rx(skb);". So this function should follow this behavior, too. 2) In "lapbether", skb_cow is called after skb_push. This results in 2 logical issues: a) skb_push is not protected by skb_cow; b) An extra headroom of 1 byte is ensured after skb_push. This extra headroom has no use in this function. It also has no use in the upper-layer function that this function passes the skb to (x25_lapb_receive_frame in net/x25/x25_dev.c). So logically skb_cow should instead be called before skb_push. Cc: Eric Dumazet Cc: Martin Schiller Signed-off-by: Xie He Signed-off-by: David S. Miller --- drivers/net/wan/hdlc_x25.c | 4 +++- drivers/net/wan/lapbether.c | 8 +++++--- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c index c84536b03aa8..f70336bb6f52 100644 --- a/drivers/net/wan/hdlc_x25.c +++ b/drivers/net/wan/hdlc_x25.c @@ -71,8 +71,10 @@ static int x25_data_indication(struct net_device *dev, struct sk_buff *skb) { unsigned char *ptr; - if (skb_cow(skb, 1)) + if (skb_cow(skb, 1)) { + kfree_skb(skb); return NET_RX_DROP; + } skb_push(skb, 1); skb_reset_network_header(skb); diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index 284832314f31..b2868433718f 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -128,10 +128,12 @@ static int lapbeth_data_indication(struct net_device *dev, struct sk_buff *skb) { unsigned char *ptr; - skb_push(skb, 1); - - if (skb_cow(skb, 1)) + if (skb_cow(skb, 1)) { + kfree_skb(skb); return NET_RX_DROP; + } + + skb_push(skb, 1); ptr = skb->data; *ptr = X25_IFACE_DATA; -- cgit v1.2.3 From 4400231c8acc7e513204c8470c6d796ba47dc169 Mon Sep 17 00:00:00 2001 From: Atish Patra Date: Wed, 15 Jul 2020 16:30:08 -0700 Subject: RISC-V: Do not rely on initrd_start/end computed during early dt parsing Currently, initrd_start/end are computed during early_init_dt_scan but used during arch_setup. We will get the following panic if initrd is used and CONFIG_DEBUG_VIRTUAL is turned on. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] kernel BUG at arch/riscv/mm/physaddr.c:33! [ 0.000000] Kernel BUG [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-rc4-00015-ged0b226fed02 #886 [ 0.000000] epc: ffffffe0002058d2 ra : ffffffe0000053f0 sp : ffffffe001001f40 [ 0.000000] gp : ffffffe00106e250 tp : ffffffe001009d40 t0 : ffffffe00107ee28 [ 0.000000] t1 : 0000000000000000 t2 : ffffffe000a2e880 s0 : ffffffe001001f50 [ 0.000000] s1 : ffffffe0001383e8 a0 : ffffffe00c087e00 a1 : 0000000080200000 [ 0.000000] a2 : 00000000010bf000 a3 : ffffffe00106f3c8 a4 : ffffffe0010bf000 [ 0.000000] a5 : ffffffe000000000 a6 : 0000000000000006 a7 : 0000000000000001 [ 0.000000] s2 : ffffffe00106f068 s3 : ffffffe00106f070 s4 : 0000000080200000 [ 0.000000] s5 : 0000000082200000 s6 : 0000000000000000 s7 : 0000000000000000 [ 0.000000] s8 : 0000000080011010 s9 : 0000000080012700 s10: 0000000000000000 [ 0.000000] s11: 0000000000000000 t3 : 000000000001fe30 t4 : 000000000001fe30 [ 0.000000] t5 : 0000000000000000 t6 : ffffffe00107c471 [ 0.000000] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x22/0x46 with crng_init=0 To avoid the error, initrd_start/end can be computed from phys_initrd_start/size in setup itself. It also improves the initrd placement by aligning the start and size with the page size. Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code") Signed-off-by: Atish Patra Signed-off-by: Palmer Dabbelt --- arch/riscv/mm/init.c | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-) diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index 8d22973bde40..f818a47a72d1 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -95,19 +95,40 @@ void __init mem_init(void) #ifdef CONFIG_BLK_DEV_INITRD static void __init setup_initrd(void) { + phys_addr_t start; unsigned long size; - if (initrd_start >= initrd_end) { - pr_info("initrd not found or empty"); + /* Ignore the virtul address computed during device tree parsing */ + initrd_start = initrd_end = 0; + + if (!phys_initrd_size) + return; + /* + * Round the memory region to page boundaries as per free_initrd_mem() + * This allows us to detect whether the pages overlapping the initrd + * are in use, but more importantly, reserves the entire set of pages + * as we don't want these pages allocated for other purposes. + */ + start = round_down(phys_initrd_start, PAGE_SIZE); + size = phys_initrd_size + (phys_initrd_start - start); + size = round_up(size, PAGE_SIZE); + + if (!memblock_is_region_memory(start, size)) { + pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region", + (u64)start, size); goto disable; } - if (__pa_symbol(initrd_end) > PFN_PHYS(max_low_pfn)) { - pr_err("initrd extends beyond end of memory"); + + if (memblock_is_region_reserved(start, size)) { + pr_err("INITRD: 0x%08llx+0x%08lx overlaps in-use memory region\n", + (u64)start, size); goto disable; } - size = initrd_end - initrd_start; - memblock_reserve(__pa_symbol(initrd_start), size); + memblock_reserve(start, size); + /* Now convert initrd to virtual addresses */ + initrd_start = (unsigned long)__va(phys_initrd_start); + initrd_end = initrd_start + phys_initrd_size; initrd_below_start_ok = 1; pr_info("Initial ramdisk at: 0x%p (%lu bytes)\n", -- cgit v1.2.3 From fa5a198359053c8e21dcc2b39c0e13871059bc9f Mon Sep 17 00:00:00 2001 From: Atish Patra Date: Wed, 15 Jul 2020 16:30:09 -0700 Subject: riscv: Parse all memory blocks to remove unusable memory Currently, maximum physical memory allowed is equal to -PAGE_OFFSET. That's why we remove any memory blocks spanning beyond that size. However, it is done only for memblock containing linux kernel which will not work if there are multiple memblocks. Process all memory blocks to figure out how much memory needs to be removed and remove at the end instead of updating the memblock list in place. Signed-off-by: Atish Patra Signed-off-by: Palmer Dabbelt --- arch/riscv/mm/init.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index f818a47a72d1..79e9d55bdf1a 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -147,26 +147,29 @@ void __init setup_bootmem(void) { struct memblock_region *reg; phys_addr_t mem_size = 0; + phys_addr_t total_mem = 0; + phys_addr_t mem_start, end = 0; phys_addr_t vmlinux_end = __pa_symbol(&_end); phys_addr_t vmlinux_start = __pa_symbol(&_start); /* Find the memory region containing the kernel */ for_each_memblock(memory, reg) { - phys_addr_t end = reg->base + reg->size; - - if (reg->base <= vmlinux_start && vmlinux_end <= end) { - mem_size = min(reg->size, (phys_addr_t)-PAGE_OFFSET); - - /* - * Remove memblock from the end of usable area to the - * end of region - */ - if (reg->base + mem_size < end) - memblock_remove(reg->base + mem_size, - end - reg->base - mem_size); - } + end = reg->base + reg->size; + if (!total_mem) + mem_start = reg->base; + if (reg->base <= vmlinux_start && vmlinux_end <= end) + BUG_ON(reg->size == 0); + total_mem = total_mem + reg->size; } - BUG_ON(mem_size == 0); + + /* + * Remove memblock from the end of usable area to the + * end of region + */ + mem_size = min(total_mem, (phys_addr_t)-PAGE_OFFSET); + if (mem_start + mem_size < end) + memblock_remove(mem_start + mem_size, + end - mem_start - mem_size); /* Reserve from the start of the kernel to the end of the kernel */ memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start); -- cgit v1.2.3