From dfd222e2aef68818320a57b13a1c52a44c22bc80 Mon Sep 17 00:00:00 2001 From: Justin Chen Date: Mon, 25 Mar 2024 12:30:24 -0700 Subject: net: bcmasp: Bring up unimac after PHY link up The unimac requires the PHY RX clk during reset or it may be put into a bad state. Bring up the unimac after link up to ensure the PHY RX clk exists. Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Justin Chen Signed-off-by: Paolo Abeni --- drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c | 28 ++++++++++++++++-------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c b/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c index dd06b68b33ed..34e5156762a8 100644 --- a/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c +++ b/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c @@ -392,7 +392,9 @@ static void umac_reset(struct bcmasp_intf *intf) umac_wl(intf, 0x0, UMC_CMD); umac_wl(intf, UMC_CMD_SW_RESET, UMC_CMD); usleep_range(10, 100); - umac_wl(intf, 0x0, UMC_CMD); + /* We hold the umac in reset and bring it out of + * reset when phy link is up. + */ } static void umac_set_hw_addr(struct bcmasp_intf *intf, @@ -412,6 +414,8 @@ static void umac_enable_set(struct bcmasp_intf *intf, u32 mask, u32 reg; reg = umac_rl(intf, UMC_CMD); + if (reg & UMC_CMD_SW_RESET) + return; if (enable) reg |= mask; else @@ -430,7 +434,6 @@ static void umac_init(struct bcmasp_intf *intf) umac_wl(intf, 0x800, UMC_FRM_LEN); umac_wl(intf, 0xffff, UMC_PAUSE_CNTRL); umac_wl(intf, 0x800, UMC_RX_MAX_PKT_SZ); - umac_enable_set(intf, UMC_CMD_PROMISC, 1); } static int bcmasp_tx_poll(struct napi_struct *napi, int budget) @@ -658,6 +661,12 @@ static void bcmasp_adj_link(struct net_device *dev) UMC_CMD_HD_EN | UMC_CMD_RX_PAUSE_IGNORE | UMC_CMD_TX_PAUSE_IGNORE); reg |= cmd_bits; + if (reg & UMC_CMD_SW_RESET) { + reg &= ~UMC_CMD_SW_RESET; + umac_wl(intf, reg, UMC_CMD); + udelay(2); + reg |= UMC_CMD_TX_EN | UMC_CMD_RX_EN | UMC_CMD_PROMISC; + } umac_wl(intf, reg, UMC_CMD); active = phy_init_eee(phydev, 0) >= 0; @@ -1045,9 +1054,6 @@ static int bcmasp_netif_init(struct net_device *dev, bool phy_connect) umac_init(intf); - /* Disable the UniMAC RX/TX */ - umac_enable_set(intf, (UMC_CMD_RX_EN | UMC_CMD_TX_EN), 0); - umac_set_hw_addr(intf, dev->dev_addr); intf->old_duplex = -1; @@ -1062,9 +1068,6 @@ static int bcmasp_netif_init(struct net_device *dev, bool phy_connect) netif_napi_add(intf->ndev, &intf->rx_napi, bcmasp_rx_poll); bcmasp_enable_rx(intf, 1); - /* Turn on UniMAC TX/RX */ - umac_enable_set(intf, (UMC_CMD_RX_EN | UMC_CMD_TX_EN), 1); - intf->crc_fwd = !!(umac_rl(intf, UMC_CMD) & UMC_CMD_CRC_FWD); bcmasp_netif_start(dev); @@ -1306,7 +1309,14 @@ static void bcmasp_suspend_to_wol(struct bcmasp_intf *intf) if (intf->wolopts & WAKE_FILTER) bcmasp_netfilt_suspend(intf); - /* UniMAC receive needs to be turned on */ + /* Bring UniMAC out of reset if needed and enable RX */ + reg = umac_rl(intf, UMC_CMD); + if (reg & UMC_CMD_SW_RESET) + reg &= ~UMC_CMD_SW_RESET; + + reg |= UMC_CMD_RX_EN | UMC_CMD_PROMISC; + umac_wl(intf, reg, UMC_CMD); + umac_enable_set(intf, UMC_CMD_RX_EN, 1); if (intf->parent->wol_irq > 0) { -- cgit v1.2.3