From ad6d17e10306a66fb40985da77889bc28c2a5c1b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 13 Mar 2024 19:28:55 +0100 Subject: dt-bindings: display: samsung,exynos5-dp: convert to DT Schema Convert Samsung Exynos5250/5420 SoC Display Port Controller bindings to DT schema with a change: add power-domains, already used in DTS. This Display Port controller is actually variant of Analogix Display Port bridge, however new DT Schema does not reference analogix,dp.yaml, because of incompatibilities in the driver. The analogix,dp.yaml expects two ports, input and output, but Linux Exynos DP DRM driver and DTS use only one port: output. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20240313182855.14140-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring --- .../bindings/display/exynos/exynos_dp.txt | 112 -------------- .../display/samsung/samsung,exynos5-dp.yaml | 163 +++++++++++++++++++++ 2 files changed, 163 insertions(+), 112 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/exynos/exynos_dp.txt create mode 100644 Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml (limited to 'Documentation/devicetree/bindings/display') diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt deleted file mode 100644 index 3a401590320f..000000000000 --- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt +++ /dev/null @@ -1,112 +0,0 @@ -The Exynos display port interface should be configured based on -the type of panel connected to it. - -We use two nodes: - -dp-controller node - -dptx-phy node(defined inside dp-controller node) - -For the DP-PHY initialization, we use the dptx-phy node. -Required properties for dptx-phy: deprecated, use phys and phy-names - -reg: deprecated - Base address of DP PHY register. - -samsung,enable-mask: deprecated - The bit-mask used to enable/disable DP PHY. - -For the Panel initialization, we read data from dp-controller node. -Required properties for dp-controller: - -compatible: - should be "samsung,exynos5-dp". - -reg: - physical base address of the controller and length - of memory mapped region. - -interrupts: - interrupt combiner values. - -clocks: - from common clock binding: handle to dp clock. - -clock-names: - from common clock binding: Shall be "dp". - -phys: - from general PHY binding: the phandle for the PHY device. - -phy-names: - from general PHY binding: Should be "dp". - -Optional properties for dp-controller: - -interlaced: - interlace scan mode. - Progressive if defined, Interlaced if not defined - -vsync-active-high: - VSYNC polarity configuration. - High if defined, Low if not defined - -hsync-active-high: - HSYNC polarity configuration. - High if defined, Low if not defined - -samsung,hpd-gpio: - Hotplug detect GPIO. - Indicates which GPIO should be used for hotplug - detection - -video interfaces: Device node can contain video interface port - nodes according to [1]. - - display-timings: timings for the connected panel as described by - Documentation/devicetree/bindings/display/panel/display-timing.txt - -For the below properties, please refer to Analogix DP binding document: - * Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml - -phys (required) - -phy-names (required) - -hpd-gpios (optional) - force-hpd (optional) - -Deprecated properties for DisplayPort: --interlaced: deprecated prop that can parsed from drm_display_mode. --vsync-active-high: deprecated prop that can parsed from drm_display_mode. --hsync-active-high: deprecated prop that can parsed from drm_display_mode. --samsung,ycbcr-coeff: deprecated prop that can parsed from drm_display_mode. --samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode. --samsung,color-space: deprecated prop that can parsed from drm_display_info. --samsung,color-depth: deprecated prop that can parsed from drm_display_info. --samsung,link-rate: deprecated prop that can reading from monitor by dpcd method. --samsung,lane-count: deprecated prop that can reading from monitor by dpcd method. --samsung,hpd-gpio: deprecated name for hpd-gpios. - -------------------------------------------------------------------------------- - -Example: - -SOC specific portion: - dp-controller { - compatible = "samsung,exynos5-dp"; - reg = <0x145b0000 0x10000>; - interrupts = <10 3>; - interrupt-parent = <&combiner>; - clocks = <&clock 342>; - clock-names = "dp"; - - phys = <&dp_phy>; - phy-names = "dp"; - }; - -Board Specific portion: - dp-controller { - display-timings { - native-mode = <&lcd_timing>; - lcd_timing: 1366x768 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; - - ports { - port@0 { - dp_out: endpoint { - remote-endpoint = <&bridge_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml new file mode 100644 index 000000000000..dda9097a7911 --- /dev/null +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5-dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5250/Exynos5420 SoC Display Port + +maintainers: + - Inki Dae + - Seung-Woo Kim + - Kyungmin Park + - Krzysztof Kozlowski + +properties: + compatible: + const: samsung,exynos5-dp + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: dp + + display-timings: + $ref: /schemas/display/panel/display-timings.yaml# + + interrupts: + maxItems: 1 + + hpd-gpios: + description: + Hotplug detect GPIO. + Indicates which GPIO should be used for hotplug detection + + phys: + maxItems: 1 + + phy-names: + items: + - const: dp + + power-domains: + maxItems: 1 + + interlaced: + type: boolean + deprecated: true + description: + Interlace scan mode. Progressive if defined, interlaced if not defined. + + vsync-active-high: + type: boolean + deprecated: true + description: + VSYNC polarity configuration. High if defined, low if not defined + + hsync-active-high: + type: boolean + deprecated: true + description: + HSYNC polarity configuration. High if defined, low if not defined + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a dp-connector node. + + required: + - port + + samsung,hpd-gpios: + maxItems: 1 + deprecated: true + + samsung,ycbcr-coeff: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_mode. + + samsung,dynamic-range: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_mode. + + samsung,color-space: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_info. + + samsung,color-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_info. + + samsung,link-rate: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can reading from monitor by dpcd method. + + samsung,lane-count: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can reading from monitor by dpcd method. + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - phys + - phy-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + dp-controller@145b0000 { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x1000>; + clocks = <&clock CLK_DP>; + clock-names = "dp"; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + phys = <&dp_phy>; + phy-names = "dp"; + pinctrl-0 = <&dp_hpd>; + pinctrl-names = "default"; + power-domains = <&pd_disp1>; + + samsung,color-space = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; + + ports { + port { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; + }; -- cgit v1.2.3 From 57b7d5d315e2b4193199228574d613640d3f5b50 Mon Sep 17 00:00:00 2001 From: Dharma Balasubiramani Date: Mon, 18 Mar 2024 11:10:13 +0530 Subject: dt-bindings: display: atmel,lcdc: convert to dtschema Convert the atmel,lcdc bindings to DT schema. Changes during conversion: add missing clocks and clock-names properties. Signed-off-by: Dharma Balasubiramani Link: https://lore.kernel.org/r/20240318-lcdc-fb-v4-1-c533c7c2c706@microchip.com Signed-off-by: Rob Herring --- .../bindings/display/atmel,lcdc-display.yaml | 103 +++++++++++++++++++++ .../devicetree/bindings/display/atmel,lcdc.txt | 87 ----------------- .../devicetree/bindings/display/atmel,lcdc.yaml | 70 ++++++++++++++ 3 files changed, 173 insertions(+), 87 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml delete mode 100644 Documentation/devicetree/bindings/display/atmel,lcdc.txt create mode 100644 Documentation/devicetree/bindings/display/atmel,lcdc.yaml (limited to 'Documentation/devicetree/bindings/display') diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml new file mode 100644 index 000000000000..a5cf040ab4ea --- /dev/null +++ b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/atmel,lcdc-display.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip's LCDC Display + +maintainers: + - Nicolas Ferre + - Dharma Balasubiramani + +description: + The LCD Controller (LCDC) consists of logic for transferring LCD image data + from an external display buffer to a TFT LCD panel. The LCDC has one display + input buffer per layer that fetches pixels through the single bus host + interface and a look-up table to allow palletized display configurations. The + LCDC is programmable on a per layer basis, and supports different LCD + resolutions, window sizes, image formats and pixel depths. + +# We need a select here since this schema is applicable only for nodes with the +# following properties + +select: + anyOf: + - required: [ 'atmel,dmacon' ] + - required: [ 'atmel,lcdcon2' ] + - required: [ 'atmel,guard-time' ] + +properties: + atmel,dmacon: + $ref: /schemas/types.yaml#/definitions/uint32 + description: dma controller configuration + + atmel,lcdcon2: + $ref: /schemas/types.yaml#/definitions/uint32 + description: lcd controller configuration + + atmel,guard-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: lcd guard time (Delay in frame periods) + maximum: 127 + + bits-per-pixel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: lcd panel bit-depth. + enum: [1, 2, 4, 8, 16, 24, 32] + + atmel,lcdcon-backlight: + $ref: /schemas/types.yaml#/definitions/flag + description: enable backlight + + atmel,lcdcon-backlight-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: invert backlight PWM polarity + + atmel,lcd-wiring-mode: + $ref: /schemas/types.yaml#/definitions/string + description: lcd wiring mode "RGB" or "BRG" + enum: + - RGB + - BRG + + atmel,power-control-gpio: + description: gpio to power on or off the LCD (as many as needed) + maxItems: 1 + + display-timings: + $ref: panel/display-timings.yaml# + +required: + - atmel,dmacon + - atmel,lcdcon2 + - atmel,guard-time + - bits-per-pixel + +additionalProperties: false + +examples: + - | + display: panel { + bits-per-pixel = <32>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <9>; + atmel,lcd-wiring-mode = "RGB"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hback-porch = <1>; + hfront-porch = <1>; + vback-porch = <40>; + vfront-porch = <1>; + hsync-len = <45>; + vsync-len = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt deleted file mode 100644 index b5e355ada2fa..000000000000 --- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt +++ /dev/null @@ -1,87 +0,0 @@ -Atmel LCDC Framebuffer ------------------------------------------------------ - -Required properties: -- compatible : - "atmel,at91sam9261-lcdc" , - "atmel,at91sam9263-lcdc" , - "atmel,at91sam9g10-lcdc" , - "atmel,at91sam9g45-lcdc" , - "atmel,at91sam9g45es-lcdc" , - "atmel,at91sam9rl-lcdc" , -- reg : Should contain 1 register ranges(address and length). - Can contain an additional register range(address and length) - for fixed framebuffer memory. Useful for dedicated memories. -- interrupts : framebuffer controller interrupt -- display: a phandle pointing to the display node - -Required nodes: -- display: a display node is required to initialize the lcd panel - This should be in the board dts. -- default-mode: a videomode within the display with timing parameters - as specified below. - -Optional properties: -- lcd-supply: Regulator for LCD supply voltage. - -Example: - - fb0: fb@00500000 { - compatible = "atmel,at91sam9g45-lcdc"; - reg = <0x00500000 0x1000>; - interrupts = <23 3 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fb>; - display = <&display0>; - #address-cells = <1>; - #size-cells = <1>; - - }; - -Example for fixed framebuffer memory: - - fb0: fb@00500000 { - compatible = "atmel,at91sam9263-lcdc"; - reg = <0x00700000 0x1000 0x70000000 0x200000>; - [...] - }; - -Atmel LCDC Display ------------------------------------------------------ -Required properties (as per of_videomode_helper): - - - atmel,dmacon: dma controller configuration - - atmel,lcdcon2: lcd controller configuration - - atmel,guard-time: lcd guard time (Delay in frame periods) - - bits-per-pixel: lcd panel bit-depth. - -Optional properties (as per of_videomode_helper): - - atmel,lcdcon-backlight: enable backlight - - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity - - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" - - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed) - -Example: - display0: display { - bits-per-pixel = <32>; - atmel,lcdcon-backlight; - atmel,dmacon = <0x1>; - atmel,lcdcon2 = <0x80008002>; - atmel,guard-time = <9>; - atmel,lcd-wiring-mode = <1>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hback-porch = <1>; - hfront-porch = <1>; - vback-porch = <40>; - vfront-porch = <1>; - hsync-len = <45>; - vsync-len = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.yaml b/Documentation/devicetree/bindings/display/atmel,lcdc.yaml new file mode 100644 index 000000000000..1b6f7e395006 --- /dev/null +++ b/Documentation/devicetree/bindings/display/atmel,lcdc.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/atmel,lcdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip's LCDC Framebuffer + +maintainers: + - Nicolas Ferre + - Dharma Balasubiramani + +description: + The LCDC works with a framebuffer, which is a section of memory that contains + a complete frame of data representing pixel values for the display. The LCDC + reads the pixel data from the framebuffer and sends it to the LCD panel to + render the image. + +properties: + compatible: + enum: + - atmel,at91sam9261-lcdc + - atmel,at91sam9263-lcdc + - atmel,at91sam9g10-lcdc + - atmel,at91sam9g45-lcdc + - atmel,at91sam9g45es-lcdc + - atmel,at91sam9rl-lcdc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: hclk + - const: lcdc_clk + + display: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle pointing to the display node. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - display + +additionalProperties: false + +examples: + - | + #include + #include + fb@500000 { + compatible = "atmel,at91sam9g45-lcdc"; + reg = <0x00500000 0x1000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>; + clock-names = "hclk", "lcdc_clk"; + display = <&display>; + }; -- cgit v1.2.3 From 2ca99e6efc91ee7c58caab3a94e9cef7a75d8ba7 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 9 May 2024 11:42:51 +0200 Subject: dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref Samsung AMS495QA01 panel is a SPI device, so it should reference spi-peripheral-props.yaml schema to allow and validate the SPI device properties. Fixes: 92be07c65b22 ("dt-bindings: display: panel: Add Samsung AMS495QA01") Signed-off-by: Krzysztof Kozlowski Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240509-dt-bindings-dsi-panel-reg-v1-1-8b2443705be0@linaro.org Signed-off-by: Rob Herring (Arm) --- Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree/bindings/display') diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml index 58fa073ce258..a5ff4de74a15 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: -- cgit v1.2.3 From 6b2358ff9493db92c4fa6ed3ad7b66c02c66f440 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 9 May 2024 11:42:52 +0200 Subject: dt-bindings: display: panel: constrain 'reg' in SPI panels SPI-attached devices could have more than one chip-select, thus their bindings are supposed to constrain the 'reg' property to match hardware. Add missing 'reg' constrain for SPI-attached display panels. Signed-off-by: Krzysztof Kozlowski Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240509-dt-bindings-dsi-panel-reg-v1-2-8b2443705be0@linaro.org Signed-off-by: Rob Herring (Arm) --- Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml | 4 +++- .../devicetree/bindings/display/panel/fascontek,fs035vg158.yaml | 3 +++ Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml | 4 +++- Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml | 3 +++ Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml | 3 ++- Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml | 4 +++- .../devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml | 4 +++- .../devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml | 3 +++ Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml | 3 ++- .../devicetree/bindings/display/panel/lgphilips,lb035q02.yaml | 3 +++ Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml | 4 +++- .../devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml | 3 +++ .../devicetree/bindings/display/panel/samsung,ams495qa01.yaml | 4 +++- Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml | 4 +++- .../devicetree/bindings/display/panel/samsung,lms380kf01.yaml | 3 ++- .../devicetree/bindings/display/panel/samsung,lms397kf04.yaml | 3 ++- Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml | 3 ++- Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml | 4 +++- Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml | 4 +++- Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml | 3 +++ Documentation/devicetree/bindings/display/panel/tpo,td.yaml | 4 +++- Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml | 3 ++- 22 files changed, 60 insertions(+), 16 deletions(-) (limited to 'Documentation/devicetree/bindings/display') diff --git a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml index acd2f3faa6b9..0aa2d3fbadaa 100644 --- a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml +++ b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml @@ -17,10 +17,12 @@ properties: compatible: const: abt,y030xx067a + reg: + maxItems: 1 + backlight: true port: true power-supply: true - reg: true reset-gpios: true required: diff --git a/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml index d13c4bd26de4..9847da784cc8 100644 --- a/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml +++ b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml @@ -17,6 +17,9 @@ properties: compatible: const: fascontek,fs035vg158 + reg: + maxItems: 1 + spi-3wire: true required: diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml index 3cabbba86581..ef5a2240b684 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml @@ -24,6 +24,9 @@ properties: - newhaven,1.8-128160EF - const: ilitek,ili9163 + reg: + maxItems: 1 + spi-max-frequency: maximum: 32000000 @@ -32,7 +35,6 @@ properties: description: Display data/command selection (D/CX) backlight: true - reg: true reset-gpios: true rotation: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml index 7d221ef35443..44423465f6e3 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml @@ -26,6 +26,9 @@ properties: - dlink,dir-685-panel - const: ilitek,ili9322 + reg: + maxItems: 1 + reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml index 94f169ea065a..5f41758c96d5 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml @@ -28,7 +28,8 @@ properties: - canaan,kd233-tft - const: ilitek,ili9341 - reg: true + reg: + maxItems: 1 dc-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml index 72788e3e6c59..c7df9a7f6589 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml +++ b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml @@ -17,10 +17,12 @@ properties: compatible: const: innolux,ej030na + reg: + maxItems: 1 + backlight: true port: true power-supply: true - reg: true reset-gpios: true required: diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml index b4be9bd8ddde..d86c916f7b55 100644 --- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml +++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml @@ -17,10 +17,12 @@ properties: compatible: const: kingdisplay,kd035g6-54nt + reg: + maxItems: 1 + backlight: true port: true power-supply: true - reg: true reset-gpios: true spi-3wire: true diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml index 7a55961e1a3d..b5dc02b27200 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml @@ -18,6 +18,9 @@ properties: compatible: const: leadtek,ltk035c5444t + reg: + maxItems: 1 + spi-3wire: true required: diff --git a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml index ee357e139ac0..590ccc27d104 100644 --- a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml +++ b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml @@ -21,7 +21,8 @@ properties: compatible: const: lg,lg4573 - reg: true + reg: + maxItems: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml index 628c4b898111..3de17fd8513b 100644 --- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml +++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml @@ -17,6 +17,9 @@ properties: compatible: const: lgphilips,lb035q02 + reg: + maxItems: 1 + label: true enable-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml index accf933d6e46..1cffe4d6d498 100644 --- a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml +++ b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml @@ -21,9 +21,11 @@ properties: compatible: const: nec,nl8048hl11 + reg: + maxItems: 1 + label: true port: true - reg: true reset-gpios: true spi-max-frequency: diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml index e808215cb39e..d0ac31ab60cf 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -71,6 +71,9 @@ properties: - shineworld,lh133k - const: panel-mipi-dbi-spi + reg: + maxItems: 1 + write-only: type: boolean description: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml index a5ff4de74a15..e081c84a932b 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml @@ -17,7 +17,9 @@ properties: compatible: const: samsung,ams495qa01 - reg: true + reg: + maxItems: 1 + reset-gpios: description: reset gpio, must be GPIO_ACTIVE_LOW elvdd-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml index c0fabeb38628..bc92b16c95b9 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml @@ -17,9 +17,11 @@ properties: compatible: const: samsung,ld9040 + reg: + maxItems: 1 + display-timings: true port: true - reg: true reset-gpios: true vdd3-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml index 70ffc88d2a08..7ce8540551f9 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml @@ -21,7 +21,8 @@ properties: compatible: const: samsung,lms380kf01 - reg: true + reg: + maxItems: 1 interrupts: description: provides an optional ESD (electrostatic discharge) diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml index 5e77cee93f83..9363032883de 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml @@ -20,7 +20,8 @@ properties: compatible: const: samsung,lms397kf04 - reg: true + reg: + maxItems: 1 reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml index d273faf4442a..d74904164719 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml @@ -20,7 +20,8 @@ properties: compatible: const: samsung,s6d27a1 - reg: true + reg: + maxItems: 1 interrupts: description: provides an optional ESD (electrostatic discharge) diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml index 6f1fc7469f07..c47e2a1a30e5 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml @@ -18,7 +18,9 @@ properties: compatible: const: samsung,s6e63m0 - reg: true + reg: + maxItems: 1 + reset-gpios: true port: true default-brightness: true diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml index ef162b51d010..0ce2ea13583d 100644 --- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml @@ -21,7 +21,9 @@ properties: - jasonic,jt240mhqs-hwt-ek-e3 - sitronix,st7789v - reg: true + reg: + maxItems: 1 + reset-gpios: true power-supply: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml index 98abdf4ddeac..5a8260224b74 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml @@ -17,6 +17,9 @@ properties: compatible: const: sony,acx565akm + reg: + maxItems: 1 + label: true reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml index e8c8ee8d7c88..7edd29df4bbb 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml +++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml @@ -22,7 +22,9 @@ properties: # Toppoly TD043MTEA1 Panel - tpo,td043mtea1 - reg: true + reg: + maxItems: 1 + label: true reset-gpios: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml index f0243d196191..59a373728e62 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml +++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml @@ -52,7 +52,8 @@ properties: - const: tpo,tpg110 - const: tpo,tpg110 - reg: true + reg: + maxItems: 1 grestb-gpios: maxItems: 1 -- cgit v1.2.3 From 9fa6bcf23e4417127c8dca996fe7ba7a14a9b7de Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 9 May 2024 11:42:53 +0200 Subject: dt-bindings: display: panel: constrain 'reg' in DSI panels DSI-attached devices could respond to more than one virtual channel number, thus their bindings are supposed to constrain the 'reg' property to match hardware. Add missing 'reg' constrain for DSI-attached display panels, based on DTS sources in Linux kernel (assume all devices take only one channel number). Signed-off-by: Krzysztof Kozlowski Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240509-dt-bindings-dsi-panel-reg-v1-3-8b2443705be0@linaro.org Signed-off-by: Rob Herring (Arm) --- .../devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml | 5 ++++- .../devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml | 4 +++- Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml | 4 +++- .../devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml | 4 +++- .../devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml | 2 +- Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml | 5 ++++- .../devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml | 5 ++++- Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml | 4 +++- Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml | 3 ++- Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml | 4 +++- .../devicetree/bindings/display/panel/ilitek,ili9881c.yaml | 4 +++- .../devicetree/bindings/display/panel/innolux,p097pfg.yaml | 4 +++- .../devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml | 3 ++- .../devicetree/bindings/display/panel/jdi,lpm102a188a.yaml | 4 +++- .../devicetree/bindings/display/panel/jdi,lt070me05000.yaml | 4 +++- .../devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml | 5 ++++- .../devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml | 5 ++++- .../devicetree/bindings/display/panel/newvision,nv3051d.yaml | 4 +++- .../devicetree/bindings/display/panel/novatek,nt35510.yaml | 5 ++++- .../devicetree/bindings/display/panel/novatek,nt35950.yaml | 4 +++- .../devicetree/bindings/display/panel/novatek,nt36523.yaml | 4 +++- .../devicetree/bindings/display/panel/novatek,nt36672a.yaml | 4 +++- .../devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml | 4 +++- .../devicetree/bindings/display/panel/raydium,rm67191.yaml | 4 +++- .../devicetree/bindings/display/panel/raydium,rm692e5.yaml | 4 +++- Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml | 2 +- .../devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml | 4 +++- .../devicetree/bindings/display/panel/samsung,s6d16d0.yaml | 4 +++- .../devicetree/bindings/display/panel/samsung,s6d7aa0.yaml | 3 ++- .../bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml | 5 ++++- .../devicetree/bindings/display/panel/samsung,s6e8aa0.yaml | 4 +++- .../devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml | 4 +++- .../devicetree/bindings/display/panel/sharp,ls043t1le01.yaml | 4 +++- .../devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml | 4 +++- Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml | 5 ++++- .../devicetree/bindings/display/panel/sony,td4353-jdi.yaml | 3 ++- .../devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml | 3 ++- .../devicetree/bindings/display/panel/synaptics,r63353.yaml | 6 ++++-- .../devicetree/bindings/display/panel/visionox,rm69299.yaml | 3 ++- .../devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml | 5 ++++- 40 files changed, 120 insertions(+), 41 deletions(-) (limited to 'Documentation/devicetree/bindings/display') diff --git a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml index 75a09df68ba0..2399cabf044c 100644 --- a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml +++ b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml @@ -21,7 +21,10 @@ allOf: properties: compatible: const: asus,z00t-tm5p5-n35596 - reg: true + + reg: + maxItems: 1 + reset-gpios: true vdd-supply: description: core voltage supply diff --git a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml index a8f3afa922c8..8b7448ad9138 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml @@ -26,6 +26,9 @@ properties: compatible: const: boe,bf060y8m-aj0 + reg: + maxItems: 1 + elvdd-supply: description: EL Driving positive (VDD) supply (4.40-4.80V) elvss-supply: @@ -38,7 +41,6 @@ properties: description: I/O voltage supply (1.62-1.98V) port: true - reg: true reset-gpios: true required: diff --git a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml index 272a3a018a33..f2496cdd9260 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml @@ -18,9 +18,11 @@ properties: - const: boe,himax8279d8p - const: boe,himax8279d10p + reg: + maxItems: 1 + backlight: true enable-gpios: true - reg: true pp33-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml index 32df26cbfeed..5eaccce13c21 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml @@ -18,7 +18,9 @@ properties: # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel - boe,th101mb31ig002-28a - reg: true + reg: + maxItems: 1 + backlight: true enable-gpios: true power-supply: true diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml index 906ef62709b8..9e603cad1348 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -38,7 +38,7 @@ properties: - starry,ili9882t reg: - description: the virtual channel number of a DSI peripheral + maxItems: 1 enable-gpios: description: a GPIO spec for the enable pin diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml index 265ab6d30572..f4cb825d1e96 100644 --- a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml +++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: elida,kd35t133 - reg: true + + reg: + maxItems: 1 + backlight: true port: true reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml index 81adb82f061d..0d8707a5844d 100644 --- a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml +++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: feixin,k101-im2ba02 - reg: true + + reg: + maxItems: 1 + backlight: true reset-gpios: true avdd-supply: diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml index 174661d13811..56bcd152f43c 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml @@ -21,6 +21,9 @@ properties: contains: const: djn,9a-3r063-1102b + reg: + maxItems: 1 + vdd1-supply: description: Digital voltage rail @@ -30,7 +33,6 @@ properties: vsp-supply: description: Negative source voltage rail - reg: true port: true required: diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml index 916bb7f94206..644387e4fb6f 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml @@ -26,7 +26,8 @@ properties: - powkiddy,x55-panel - const: himax,hx8394 - reg: true + reg: + maxItems: 1 reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml index f4f91f93f490..ff67129c9466 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml @@ -20,9 +20,11 @@ properties: - tianma,tm041xdhg01 - const: ilitek,ili9805 + reg: + maxItems: 1 + avdd-supply: true dvdd-supply: true - reg: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index b1e624be3e33..ac226d5b2c1e 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -23,9 +23,11 @@ properties: - wanchanglong,w552946aba - const: ilitek,ili9881c + reg: + maxItems: 1 + backlight: true power-supply: true - reg: true reset-gpios: true rotation: true diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml index 5a5f071627fb..4164e3f7061d 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml +++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml @@ -16,9 +16,11 @@ properties: compatible: const: innolux,p097pfg + reg: + maxItems: 1 + backlight: true enable-gpios: true - reg: true avdd-supply: description: The regulator that provides positive voltage diff --git a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml index 41eb7fbf7715..20afdb4568a2 100644 --- a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml +++ b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml @@ -21,7 +21,8 @@ properties: - radxa,display-8hd-ad002 - const: jadard,jd9365da-h3 - reg: true + reg: + maxItems: 1 vdd-supply: description: supply regulator for VDD, usually 3.3V diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml index 2f4d27a309a7..a8621459005b 100644 --- a/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml +++ b/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml @@ -26,7 +26,9 @@ properties: compatible: const: jdi,lpm102a188a - reg: true + reg: + maxItems: 1 + enable-gpios: true reset-gpios: true power-supply: true diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml index 63c82a4378ff..0c8b5cb78bfe 100644 --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml @@ -16,8 +16,10 @@ properties: compatible: const: jdi,lt070me05000 + reg: + maxItems: 1 + enable-gpios: true - reg: true reset-gpios: true vddp-supply: diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml index a40ab887ada7..e2a2dd4ef5fa 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml @@ -18,7 +18,10 @@ properties: - leadtek,ltk050h3146w - leadtek,ltk050h3146w-a2 - leadtek,ltk050h3148w - reg: true + + reg: + maxItems: 1 + backlight: true reset-gpios: true iovcc-supply: diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml index d589f1677214..af9e0ea0e72f 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -17,7 +17,10 @@ properties: enum: - leadtek,ltk101b4029w - leadtek,ltk500hd1829 - reg: true + + reg: + maxItems: 1 + backlight: true reset-gpios: true iovcc-supply: diff --git a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml index 7a634fbc465e..d3a25a8fd7e3 100644 --- a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml +++ b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml @@ -24,7 +24,9 @@ properties: - powkiddy,rk2023-panel - const: newvision,nv3051d - reg: true + reg: + maxItems: 1 + backlight: true port: true reset-gpios: diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml index 91921f4b0e5f..bb50fd5506c3 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml @@ -24,7 +24,10 @@ properties: string determines how the NT35510 panel driver shall be configured to work with the indicated panel. The novatek,nt35510 compatible shall always be provided as a fallback. - reg: true + + reg: + maxItems: 1 + reset-gpios: true vdd-supply: description: regulator that supplies the vdd voltage diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml index 377a05d48a02..52cee4ee84b4 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml @@ -33,6 +33,9 @@ properties: to work with the indicated panel. The novatek,nt35950 compatible shall always be provided as a fallback. + reg: + maxItems: 1 + reset-gpios: maxItems: 1 description: phandle of gpio for reset line - This should be 8mA, gpio @@ -49,7 +52,6 @@ properties: backlight: true ports: true - reg: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml index 5f7e4c486094..0447ee724947 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml @@ -30,6 +30,9 @@ properties: - lenovo,j606f-boe-nt36523w - const: novatek,nt36523w + reg: + maxItems: 1 + reset-gpios: maxItems: 1 description: phandle of gpio for reset line - This should be 8mA @@ -37,7 +40,6 @@ properties: vddio-supply: description: regulator that supplies the I/O voltage - reg: true ports: true rotation: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml index ae821f465e1c..800a2f0a4dad 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml @@ -29,6 +29,9 @@ properties: determines how the NT36672A panel driver is configured for the indicated panel. The novatek,nt36672a compatible shall always be provided as a fallback. + reg: + maxItems: 1 + reset-gpios: maxItems: 1 description: phandle of gpio for reset line - This should be 8mA, gpio @@ -44,7 +47,6 @@ properties: vddneg-supply: description: phandle of the negative boost supply regulator - reg: true port: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml index 72463795e4c6..e5d8785fdf90 100644 --- a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml +++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml @@ -38,10 +38,12 @@ properties: compatible: const: olimex,lcd-olinuxino + reg: + maxItems: 1 + backlight: true enable-gpios: true power-supply: true - reg: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml index d62fd692bf10..4825792bf712 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml @@ -16,7 +16,9 @@ properties: compatible: const: raydium,rm67191 - reg: true + reg: + maxItems: 1 + port: true reset-gpios: true width-mm: true diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml index f436ba6738ca..7ad223f98253 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml @@ -22,6 +22,9 @@ properties: - const: fairphone,fp5-rm692e5-boe - const: raydium,rm692e5 + reg: + maxItems: 1 + dvdd-supply: description: Digital voltage rail @@ -31,7 +34,6 @@ properties: vddio-supply: description: I/O voltage rail - reg: true port: true required: diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml index 95ce22c6787a..04f86e0cbac9 100644 --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml @@ -14,7 +14,7 @@ properties: const: ronbo,rb070d30 reg: - description: MIPI-DSI virtual channel + maxItems: 1 power-gpios: description: GPIO used for the power pin diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml index ccc482570d6a..e8f9e9d06a29 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml @@ -33,7 +33,9 @@ properties: # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel - samsung,s6e3hf2 - reg: true + reg: + maxItems: 1 + reset-gpios: true enable-gpios: true te-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml index 66d147496bc3..2af5bc47323f 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml @@ -16,8 +16,10 @@ properties: compatible: const: samsung,s6d16d0 + reg: + maxItems: 1 + port: true - reg: true reset-gpios: true vdd1-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml index 45a236d2cc70..939da65114bf 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml @@ -24,7 +24,8 @@ properties: - samsung,ltl101at01 - const: samsung,s6d7aa0 - reg: true + reg: + maxItems: 1 backlight: description: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml index b749e9e906b7..42634fc3b5b2 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: samsung,s6e88a0-ams452ef01 - reg: true + + reg: + maxItems: 1 + port: true reset-gpios: true vdd3-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml index 200fbf1c74a0..4601fa460680 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -16,7 +16,9 @@ properties: compatible: const: samsung,s6e8aa0 - reg: true + reg: + maxItems: 1 + reset-gpios: true display-timings: true diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml index 57b44a0e763d..ce820b96a7e2 100644 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml @@ -37,7 +37,9 @@ properties: - enum: - sharp,lq101r1sx01 - reg: true + reg: + maxItems: 1 + power-supply: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml index a90d0d8bf7c9..b6ea246430ce 100644 --- a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml @@ -16,7 +16,9 @@ properties: compatible: const: sharp,ls043t1le01-qhd - reg: true + reg: + maxItems: 1 + backlight: true reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml index 271c097cc9a4..77a4fce129e7 100644 --- a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml @@ -16,7 +16,9 @@ properties: compatible: const: sharp,ls060t1sx01 - reg: true + reg: + maxItems: 1 + backlight: true reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml index 059cc6dbcfca..fd778a20f760 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml @@ -22,7 +22,10 @@ properties: enum: - sony,acx424akp - sony,acx424akm - reg: true + + reg: + maxItems: 1 + reset-gpios: true vddi-supply: description: regulator that supplies the vddi voltage diff --git a/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml index b6b885b4c22d..feca40b0d759 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml @@ -20,7 +20,8 @@ properties: compatible: const: sony,td4353-jdi-tama - reg: true + reg: + maxItems: 1 backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml index 967972939598..a58a31349757 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml @@ -21,7 +21,8 @@ properties: compatible: const: sony,tulip-truly-nt35521 - reg: true + reg: + maxItems: 1 positive5-supply: description: Positive 5V supply diff --git a/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml index e5617d125567..2fd6e0ec3682 100644 --- a/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml +++ b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml @@ -19,15 +19,17 @@ properties: - sharp,ls068b3sx02 - const: syna,r63353 + reg: + maxItems: 1 + avdd-supply: true dvdd-supply: true - reg: true required: - compatible + - reg - avdd-supply - dvdd-supply - - reg - reset-gpios - port - backlight diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml index 772399067515..30047a62fc11 100644 --- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml @@ -20,7 +20,8 @@ properties: compatible: const: visionox,rm69299-1080p-display - reg: true + reg: + maxItems: 1 vdda-supply: description: | diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml index c407deb6afb1..9c9743a23500 100644 --- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: xinpeng,xpp055c272 - reg: true + + reg: + maxItems: 1 + backlight: true port: true reset-gpios: true -- cgit v1.2.3