From 0642b3f47ced9e320cffee6c837bbc7c69be6312 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 19 Dec 2022 10:37:13 +0100 Subject: dt-bindings: dma: fsl-mxs-dma: Convert MXS DMA to DT schema Convert the MXS DMA binding to DT schema format using json-schema. Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c in Linux kernel does not use it, the property contains duplicate array entries in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get rid of that optional property altogether. Update example node names to be standard dma-controller@ , add global interrupt-parent property into example. Signed-off-by: Marek Vasut Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20221219093713.328776-1-marex@denx.de Signed-off-by: Vinod Koul --- .../devicetree/bindings/dma/fsl-mxs-dma.txt | 60 ---------------------- 1 file changed, 60 deletions(-) delete mode 100644 Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt (limited to 'Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt') diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt deleted file mode 100644 index e30e184f50c7..000000000000 --- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt +++ /dev/null @@ -1,60 +0,0 @@ -* Freescale MXS DMA - -Required properties: -- compatible : Should be "fsl,-dma-apbh" or "fsl,-dma-apbx" -- reg : Should contain registers location and length -- interrupts : Should contain the interrupt numbers of DMA channels. - If a channel is empty/reserved, 0 should be filled in place. -- #dma-cells : Must be <1>. The number cell specifies the channel ID. -- dma-channels : Number of channels supported by the DMA controller - -Optional properties: -- interrupt-names : Name of DMA channel interrupts - -Supported chips: -imx23, imx28. - -Examples: - -dma_apbh: dma-apbh@80004000 { - compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 0x2000>; - interrupts = <82 83 84 85 - 88 88 88 88 - 88 88 88 88 - 87 86 0 0>; - interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3", - "gpmi0", "gmpi1", "gpmi2", "gmpi3", - "gpmi4", "gmpi5", "gpmi6", "gmpi7", - "hsadc", "lcdif", "empty", "empty"; - #dma-cells = <1>; - dma-channels = <16>; -}; - -dma_apbx: dma-apbx@80024000 { - compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 0x2000>; - interrupts = <78 79 66 0 - 80 81 68 69 - 70 71 72 73 - 74 75 76 77>; - interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty", - "saif0", "saif1", "i2c0", "i2c1", - "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", - "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; - #dma-cells = <1>; - dma-channels = <16>; -}; - -DMA clients connected to the MXS DMA controller must use the format -described in the dma.txt file. - -Examples: - -auart0: serial@8006a000 { - compatible = "fsl,imx28-auart", "fsl,imx23-auart"; - reg = <0x8006a000 0x2000>; - interrupts = <112>; - dmas = <&dma_apbx 8>, <&dma_apbx 9>; - dma-names = "rx", "tx"; -}; -- cgit v1.2.3