From efc24e148009bb7965439a3a29abfb778a45061e Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 16 May 2014 15:17:16 +0300 Subject: dt/bindings: ti,edma: Remove redundant properties from documentation From CCCFG register of eDMA3 we can get all the needed information for the driver about the IP: Number of channels: NUM_DMACH Number of regions: NUM_REGN Number of slots (PaRAM sets): NUM_PAENTRY Number of TC/EQ: NUM_EVQUE The ti,edma-regions; ti,edma-slots and dma-channels in DT are redundant since the very same information can be obtained from the HW. The mentioned properties are deprecated. Signed-off-by: Peter Ujfalusi Signed-off-by: Sekhar Nori --- Documentation/devicetree/bindings/dma/ti-edma.txt | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'Documentation/devicetree/bindings/dma/ti-edma.txt') diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index 9fbbdb783a72..ad67c41c38df 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -2,11 +2,8 @@ TI EDMA Required properties: - compatible : "ti,edma3" -- ti,edma-regions: Number of regions -- ti,edma-slots: Number of slots - #dma-cells: Should be set to <1> Clients should use a single channel number per DMA request. -- dma-channels: Specify total DMA channels per CC - reg: Memory map for accessing module - interrupt-parent: Interrupt controller the interrupt is routed through - interrupts: Exactly 3 interrupts need to be specified in the order: @@ -17,6 +14,13 @@ Optional properties: - ti,hwmods: Name of the hwmods associated to the EDMA - ti,edma-xbar-event-map: Crossbar event to channel map +Deprecated properties: +Listed here in case one wants to boot an old kernel with new DTB. These +properties might need to be added to the new DTS files. +- ti,edma-regions: Number of regions +- ti,edma-slots: Number of slots +- dma-channels: Specify total DMA channels per CC + Example: edma: edma@49000000 { @@ -26,9 +30,6 @@ edma: edma@49000000 { compatible = "ti,edma3"; ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; #dma-cells = <1>; - dma-channels = <64>; - ti,edma-regions = <4>; - ti,edma-slots = <256>; ti,edma-xbar-event-map = <1 12 2 13>; }; -- cgit v1.2.3