From 832df9e8ecabec271a0c418bdbb94da826dc5b6d Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 20 Nov 2015 17:53:59 +0900 Subject: extcon: arizona: Update naming for second jack detection DT binding Update the name for the second jack detection pin binding to be a little less confusing. Signed-off-by: Charles Keepax Acked-by: Rob Herring Signed-off-by: Chanwoo Choi --- Documentation/devicetree/bindings/extcon/extcon-arizona.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree/bindings/extcon') diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt index 7640a3502c67..8aa0bd430f7b 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt @@ -14,9 +14,9 @@ Optional properties: If this node is not mentioned or if the value is unknown, then headphone detection mode is set to HPDETL. - - wlf,use-jd-gpio : Use GPIO input along with JD1 for dual pin jack + - wlf,use-jd2 : Use the additional JD input along with JD1 for dual pin jack detection. - - wlf,use-jd-gpio-nopull : Internal pull on GPIO is disabled when used for + - wlf,use-jd2-nopull : Internal pull on JD2 is disabled when used for jack detection. - wlf,jd-invert : Invert the polarity of the jack detection switch -- cgit v1.2.3