From cca4786174656673f89684347e0028c88df57031 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 28 Jun 2019 09:19:59 -0300 Subject: docs: hid: convert to ReST Rename the HID documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. While here, fix the sysfs example from hid-sensor.txt, that has a lot of "?" instead of the proper UTF-8 characters that are produced by the tree command. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab Acked-by: Benjamin Tissoires Signed-off-by: Benjamin Tissoires --- Documentation/hid/hid-sensor.rst | 242 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 242 insertions(+) create mode 100644 Documentation/hid/hid-sensor.rst (limited to 'Documentation/hid/hid-sensor.rst') diff --git a/Documentation/hid/hid-sensor.rst b/Documentation/hid/hid-sensor.rst new file mode 100644 index 000000000000..758972e34971 --- /dev/null +++ b/Documentation/hid/hid-sensor.rst @@ -0,0 +1,242 @@ +===================== +HID Sensors Framework +===================== +HID sensor framework provides necessary interfaces to implement sensor drivers, +which are connected to a sensor hub. The sensor hub is a HID device and it provides +a report descriptor conforming to HID 1.12 sensor usage tables. + +Description from the HID 1.12 "HID Sensor Usages" specification: +"Standardization of HID usages for sensors would allow (but not require) sensor +hardware vendors to provide a consistent Plug And Play interface at the USB boundary, +thereby enabling some operating systems to incorporate common device drivers that +could be reused between vendors, alleviating any need for the vendors to provide +the drivers themselves." + +This specification describes many usage IDs, which describe the type of sensor +and also the individual data fields. Each sensor can have variable number of +data fields. The length and order is specified in the report descriptor. For +example a part of report descriptor can look like:: + + INPUT(1)[INPUT] + .. + Field(2) + Physical(0020.0073) + Usage(1) + 0020.045f + Logical Minimum(-32767) + Logical Maximum(32767) + Report Size(8) + Report Count(1) + Report Offset(16) + Flags(Variable Absolute) + .. + .. + +The report is indicating "sensor page (0x20)" contains an accelerometer-3D (0x73). +This accelerometer-3D has some fields. Here for example field 2 is motion intensity +(0x045f) with a logical minimum value of -32767 and logical maximum of 32767. The +order of fields and length of each field is important as the input event raw +data will use this format. + + +Implementation +============== + +This specification defines many different types of sensors with different sets of +data fields. It is difficult to have a common input event to user space applications, +for different sensors. For example an accelerometer can send X,Y and Z data, whereas +an ambient light sensor can send illumination data. +So the implementation has two parts: + +- Core hid driver +- Individual sensor processing part (sensor drivers) + +Core driver +----------- +The core driver registers (hid-sensor-hub) registers as a HID driver. It parses +report descriptors and identifies all the sensors present. It adds an MFD device +with name HID-SENSOR-xxxx (where xxxx is usage id from the specification). + +For example: + +HID-SENSOR-200073 is registered for an Accelerometer 3D driver. + +So if any driver with this name is inserted, then the probe routine for that +function will be called. So an accelerometer processing driver can register +with this name and will be probed if there is an accelerometer-3D detected. + +The core driver provides a set of APIs which can be used by the processing +drivers to register and get events for that usage id. Also it provides parsing +functions, which get and set each input/feature/output report. + +Individual sensor processing part (sensor drivers) +-------------------------------------------------- + +The processing driver will use an interface provided by the core driver to parse +the report and get the indexes of the fields and also can get events. This driver +can use IIO interface to use the standard ABI defined for a type of sensor. + + +Core driver Interface +===================== + +Callback structure:: + + Each processing driver can use this structure to set some callbacks. + int (*suspend)(..): Callback when HID suspend is received + int (*resume)(..): Callback when HID resume is received + int (*capture_sample)(..): Capture a sample for one of its data fields + int (*send_event)(..): One complete event is received which can have + multiple data fields. + +Registration functions:: + + int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev, + u32 usage_id, + struct hid_sensor_hub_callbacks *usage_callback): + +Registers callbacks for an usage id. The callback functions are not allowed +to sleep:: + + + int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev, + u32 usage_id): + +Removes callbacks for an usage id. + + +Parsing function:: + + int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev, + u8 type, + u32 usage_id, u32 attr_usage_id, + struct hid_sensor_hub_attribute_info *info); + +A processing driver can look for some field of interest and check if it exists +in a report descriptor. If it exists it will store necessary information +so that fields can be set or get individually. +These indexes avoid searching every time and getting field index to get or set. + + +Set Feature report:: + + int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, + u32 field_index, s32 value); + +This interface is used to set a value for a field in feature report. For example +if there is a field report_interval, which is parsed by a call to +sensor_hub_input_get_attribute_info before, then it can directly set that +individual field:: + + + int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, + u32 field_index, s32 *value); + +This interface is used to get a value for a field in input report. For example +if there is a field report_interval, which is parsed by a call to +sensor_hub_input_get_attribute_info before, then it can directly get that +individual field value:: + + + int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, + u32 usage_id, + u32 attr_usage_id, u32 report_id); + +This is used to get a particular field value through input reports. For example +accelerometer wants to poll X axis value, then it can call this function with +the usage id of X axis. HID sensors can provide events, so this is not necessary +to poll for any field. If there is some new sample, the core driver will call +registered callback function to process the sample. + + +---------- + +HID Custom and generic Sensors +------------------------------ + + +HID Sensor specification defines two special sensor usage types. Since they +don't represent a standard sensor, it is not possible to define using Linux IIO +type interfaces. +The purpose of these sensors is to extend the functionality or provide a +way to obfuscate the data being communicated by a sensor. Without knowing the +mapping between the data and its encapsulated form, it is difficult for +an application/driver to determine what data is being communicated by the sensor. +This allows some differentiating use cases, where vendor can provide applications. +Some common use cases are debug other sensors or to provide some events like +keyboard attached/detached or lid open/close. + +To allow application to utilize these sensors, here they are exported uses sysfs +attribute groups, attributes and misc device interface. + +An example of this representation on sysfs:: + + /sys/devices/pci0000:00/INT33C2:00/i2c-0/i2c-INT33D1:00/0018:8086:09FA.0001/HID-SENSOR-2000e1.6.auto$ tree -R + . + │   ├── enable_sensor + │   │   ├── feature-0-200316 + │   │   │   ├── feature-0-200316-maximum + │   │   │   ├── feature-0-200316-minimum + │   │   │   ├── feature-0-200316-name + │   │   │   ├── feature-0-200316-size + │   │   │   ├── feature-0-200316-unit-expo + │   │   │   ├── feature-0-200316-units + │   │   │   ├── feature-0-200316-value + │   │   ├── feature-1-200201 + │   │   │   ├── feature-1-200201-maximum + │   │   │   ├── feature-1-200201-minimum + │   │   │   ├── feature-1-200201-name + │   │   │   ├── feature-1-200201-size + │   │   │   ├── feature-1-200201-unit-expo + │   │   │   ├── feature-1-200201-units + │   │   │   ├── feature-1-200201-value + │   │   ├── input-0-200201 + │   │   │   ├── input-0-200201-maximum + │   │   │   ├── input-0-200201-minimum + │   │   │   ├── input-0-200201-name + │   │   │   ├── input-0-200201-size + │   │   │   ├── input-0-200201-unit-expo + │   │   │   ├── input-0-200201-units + │   │   │   ├── input-0-200201-value + │   │   ├── input-1-200202 + │   │   │   ├── input-1-200202-maximum + │   │   │   ├── input-1-200202-minimum + │   │   │   ├── input-1-200202-name + │   │   │   ├── input-1-200202-size + │   │   │   ├── input-1-200202-unit-expo + │   │   │   ├── input-1-200202-units + │   │   │   ├── input-1-200202-value + +Here there is a custom sensors with four fields, two feature and two inputs. +Each field is represented by a set of attributes. All fields except the "value" +are read only. The value field is a RW field. + +Example:: + + /sys/bus/platform/devices/HID-SENSOR-2000e1.6.auto/feature-0-200316$ grep -r . * + feature-0-200316-maximum:6 + feature-0-200316-minimum:0 + feature-0-200316-name:property-reporting-state + feature-0-200316-size:1 + feature-0-200316-unit-expo:0 + feature-0-200316-units:25 + feature-0-200316-value:1 + +How to enable such sensor? +^^^^^^^^^^^^^^^^^^^^^^^^^^ + +By default sensor can be power gated. To enable sysfs attribute "enable" can be +used:: + + $ echo 1 > enable_sensor + +Once enabled and powered on, sensor can report value using HID reports. +These reports are pushed using misc device interface in a FIFO order:: + + /dev$ tree | grep HID-SENSOR-2000e1.6.auto + │   │   │   ├── 10:53 -> ../HID-SENSOR-2000e1.6.auto + │   ├── HID-SENSOR-2000e1.6.auto + +Each reports can be of variable length preceded by a header. This header +consist of a 32 bit usage id, 64 bit time stamp and 32 bit length field of raw +data. -- cgit v1.2.3