From 9cb238c00ba5c1ddfff2c2ed6aa66c15b962e4c3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 26 Nov 2013 15:50:33 -0800 Subject: mmc: omap: Fix I2C dependency and make driver usable with device tree Some features can be configured by the companion I2C chips, which may not be available at the probe time. Fix the issue by returning -EPROBE_DEFER when the MMC controller slots are not configured. While at it, let's also add minimal device tree support so omap24xx platforms can use this driver without legacy mode since we claim to support device tree for mach-omap2 based systems. Although adding the minimal device tree support is not strictly a fix, it does remove one of the last blockers for dropping a bunch of legacy platform data for mach-omap2. Cc: linux-mmc@vger.kernel.org Acked-by: Chris Ball Signed-off-by: Tony Lindgren --- Documentation/devicetree/bindings/mmc/ti-omap.txt | 54 +++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/ti-omap.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt new file mode 100644 index 000000000000..8de579969763 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt @@ -0,0 +1,54 @@ +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + -- cgit v1.2.3 From 286c24028c7f2df637323e672d9aa54a07b67bde Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Wed, 27 Nov 2013 08:58:40 -0800 Subject: misc: mic: Bug fix for sysfs poll usage. MIC user space daemon poll's on sysfs changes. The documentation for sysfs_poll(...) in fs/sysfs/file.c states that "Once poll/select indicates that the value has changed, you need to close and re-open the file, or seek to 0 and read again". This step was missed out earlier and resulted in the daemon spinning continuously rather than getting blocked in 'poll'. This bug was exposed by commit aea585ef8fa65163 introduced as part of sysfs changes in 3.13-rc1. A seek to 0 has been introduced to fix it. Reviewed-by: Sudeep Dutt Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman --- Documentation/mic/mpssd/mpssd.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c index 0c980ad40b17..5c7fdda56f0e 100644 --- a/Documentation/mic/mpssd/mpssd.c +++ b/Documentation/mic/mpssd/mpssd.c @@ -1412,6 +1412,12 @@ mic_config(void *arg) } do { + ret = lseek(fd, 0, SEEK_SET); + if (ret < 0) { + mpsslog("%s: Failed to seek to file start '%s': %s\n", + mic->name, pathname, strerror(errno)); + goto close_error1; + } ret = read(fd, value, sizeof(value)); if (ret < 0) { mpsslog("%s: Failed to read sysfs entry '%s': %s\n", -- cgit v1.2.3 From 1e31aa9270daab40c7aef9d5488982e3475b87ef Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Wed, 27 Nov 2013 08:58:41 -0800 Subject: misc: mic: Fix user space namespace pollution from mic_common.h. Avoid declaring ALIGN() and __aligned() in include/uapi/linux/mic_common.h since they pollute user space namespace. Also, mic_aligned_size() can be simply replaced simply by sizeof() since all structures where mic_aligned_size() is used are declared using __attribute__ ((aligned(8))); -- >From mail from H Peter Anvin about this: On Fri, Nov 08, 2013 H Peter Anvin wrote: Subject: Namespace pollution in mic_common.h This puts two macros, ALIGN() and __aligned(), into arbitrary user space namespace. This really isn't safe or acceptable, especially since those symbols are highly generic. ... When these structures are forced-aligned, they will in fact have padding automatically added by the compiler to an 8-byte boundary anyway, so mic_aligned_size() does nothing. ... Reported-by: H Peter Anvin Reviewed-by: Sudeep Dutt Signed-off-by: Nikhil Rao Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman --- Documentation/mic/mpssd/mpssd.c | 4 ++-- drivers/misc/mic/card/mic_virtio.c | 4 ++-- drivers/misc/mic/card/mic_virtio.h | 7 +++---- drivers/misc/mic/host/mic_virtio.c | 2 +- include/uapi/linux/mic_common.h | 26 +++++++++----------------- 5 files changed, 17 insertions(+), 26 deletions(-) (limited to 'Documentation') diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c index 5c7fdda56f0e..91f9e8e4ef7b 100644 --- a/Documentation/mic/mpssd/mpssd.c +++ b/Documentation/mic/mpssd/mpssd.c @@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type) int i; void *dp = get_dp(mic, type); - for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE; + for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE; i += mic_total_desc_size(d)) { d = dp + i; @@ -520,7 +520,7 @@ static void * virtio_net(void *arg) { static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)]; - static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64); + static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64))); struct iovec vnet_iov[2][2] = { { { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) }, { .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } }, diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c index 4dce912f9ea6..20c567b1760b 100644 --- a/drivers/misc/mic/card/mic_virtio.c +++ b/drivers/misc/mic/card/mic_virtio.c @@ -520,8 +520,8 @@ static void mic_scan_devices(struct mic_driver *mdrv, bool remove) struct device *dev; int ret; - for (i = mic_aligned_size(struct mic_bootparam); - i < MIC_DP_SIZE; i += mic_total_desc_size(d)) { + for (i = sizeof(struct mic_bootparam); i < MIC_DP_SIZE; + i += mic_total_desc_size(d)) { d = mdrv->dp + i; dc = (void __iomem *)d + mic_aligned_desc_size(d); /* diff --git a/drivers/misc/mic/card/mic_virtio.h b/drivers/misc/mic/card/mic_virtio.h index 2c5c22c93ba8..d0407ba53bb7 100644 --- a/drivers/misc/mic/card/mic_virtio.h +++ b/drivers/misc/mic/card/mic_virtio.h @@ -42,8 +42,8 @@ static inline unsigned mic_desc_size(struct mic_device_desc __iomem *desc) { - return mic_aligned_size(*desc) - + ioread8(&desc->num_vq) * mic_aligned_size(struct mic_vqconfig) + return sizeof(*desc) + + ioread8(&desc->num_vq) * sizeof(struct mic_vqconfig) + ioread8(&desc->feature_len) * 2 + ioread8(&desc->config_len); } @@ -67,8 +67,7 @@ mic_vq_configspace(struct mic_device_desc __iomem *desc) } static inline unsigned mic_total_desc_size(struct mic_device_desc __iomem *desc) { - return mic_aligned_desc_size(desc) + - mic_aligned_size(struct mic_device_ctrl); + return mic_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl); } int mic_devices_init(struct mic_driver *mdrv); diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c index 945a3d0fe227..efe8da4401e9 100644 --- a/drivers/misc/mic/host/mic_virtio.c +++ b/drivers/misc/mic/host/mic_virtio.c @@ -467,7 +467,7 @@ static int mic_copy_dp_entry(struct mic_vdev *mvdev, } /* Find the first free device page entry */ - for (i = mic_aligned_size(struct mic_bootparam); + for (i = sizeof(struct mic_bootparam); i < MIC_DP_SIZE - mic_total_desc_size(dd_config); i += mic_total_desc_size(devp)) { devp = mdev->dp + i; diff --git a/include/uapi/linux/mic_common.h b/include/uapi/linux/mic_common.h index 17e7d95e4f53..d0ec46d88d2a 100644 --- a/include/uapi/linux/mic_common.h +++ b/include/uapi/linux/mic_common.h @@ -23,12 +23,7 @@ #include -#ifndef __KERNEL__ -#define ALIGN(a, x) (((a) + (x) - 1) & ~((x) - 1)) -#define __aligned(x) __attribute__ ((aligned(x))) -#endif - -#define mic_aligned_size(x) ALIGN(sizeof(x), 8) +#define __mic_align(a, x) (((a) + (x) - 1) & ~((x) - 1)) /** * struct mic_device_desc: Virtio device information shared between the @@ -49,7 +44,7 @@ struct mic_device_desc { __u8 config_len; __u8 status; __u64 config[0]; -} __aligned(8); +} __attribute__ ((aligned(8))); /** * struct mic_device_ctrl: Per virtio device information in the device page @@ -74,7 +69,7 @@ struct mic_device_ctrl { __u8 used_address_updated; __s8 c2h_vdev_db; __s8 h2c_vdev_db; -} __aligned(8); +} __attribute__ ((aligned(8))); /** * struct mic_bootparam: Virtio device independent information in device page @@ -93,7 +88,7 @@ struct mic_bootparam { __s8 h2c_config_db; __u8 shutdown_status; __u8 shutdown_card; -} __aligned(8); +} __attribute__ ((aligned(8))); /** * struct mic_device_page: High level representation of the device page @@ -119,7 +114,7 @@ struct mic_vqconfig { __u64 address; __u64 used_address; __u16 num; -} __aligned(8); +} __attribute__ ((aligned(8))); /* * The alignment to use between consumer and producer parts of vring. @@ -173,15 +168,13 @@ struct mic_vring { int len; }; -#define mic_aligned_desc_size(d) ALIGN(mic_desc_size(d), 8) +#define mic_aligned_desc_size(d) __mic_align(mic_desc_size(d), 8) #ifndef INTEL_MIC_CARD static inline unsigned mic_desc_size(const struct mic_device_desc *desc) { - return mic_aligned_size(*desc) - + desc->num_vq * mic_aligned_size(struct mic_vqconfig) - + desc->feature_len * 2 - + desc->config_len; + return sizeof(*desc) + desc->num_vq * sizeof(struct mic_vqconfig) + + desc->feature_len * 2 + desc->config_len; } static inline struct mic_vqconfig * @@ -201,8 +194,7 @@ static inline __u8 *mic_vq_configspace(const struct mic_device_desc *desc) } static inline unsigned mic_total_desc_size(struct mic_device_desc *desc) { - return mic_aligned_desc_size(desc) + - mic_aligned_size(struct mic_device_ctrl); + return mic_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl); } #endif -- cgit v1.2.3 From 173c07278763850bfee57eec442dce38855d6f13 Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Wed, 27 Nov 2013 08:58:42 -0800 Subject: misc: mic: Fix endianness issues. Endianness issues are now consistent as per the documentation in host/mic_virtio.h. Sparse warnings related to endianness are also fixed. Note that the MIC driver implementation assumes that the host can be both BE or LE whereas the card is always LE. Reported-by: Fengguang Wu Reviewed-by: Sudeep Dutt Reviewed-by: Nikhil Rao Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman --- Documentation/mic/mpssd/mpssd.c | 8 ++++---- drivers/misc/mic/card/mic_virtio.c | 14 +++++++------- drivers/misc/mic/host/mic_boot.c | 2 +- drivers/misc/mic/host/mic_virtio.c | 14 +++++++------- drivers/misc/mic/host/mic_x100.c | 4 ++-- include/uapi/linux/mic_common.h | 14 +++++++------- 6 files changed, 28 insertions(+), 28 deletions(-) (limited to 'Documentation') diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c index 91f9e8e4ef7b..4d17487d5ad9 100644 --- a/Documentation/mic/mpssd/mpssd.c +++ b/Documentation/mic/mpssd/mpssd.c @@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type, __func__, mic->name, vr0->va, vr0->info, vr_size, vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); mpsslog("magic 0x%x expected 0x%x\n", - vr0->info->magic, MIC_MAGIC + type); - assert(vr0->info->magic == MIC_MAGIC + type); + le32toh(vr0->info->magic), MIC_MAGIC + type); + assert(le32toh(vr0->info->magic) == MIC_MAGIC + type); if (vr1) { vr1->va = (struct mic_vring *) &va[MIC_DEVICE_PAGE_END + vr_size]; @@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type, __func__, mic->name, vr1->va, vr1->info, vr_size, vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); mpsslog("magic 0x%x expected 0x%x\n", - vr1->info->magic, MIC_MAGIC + type + 1); - assert(vr1->info->magic == MIC_MAGIC + type + 1); + le32toh(vr1->info->magic), MIC_MAGIC + type + 1); + assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1); } done: return va; diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c index 20c567b1760b..ca0445fa3d83 100644 --- a/drivers/misc/mic/card/mic_virtio.c +++ b/drivers/misc/mic/card/mic_virtio.c @@ -248,17 +248,16 @@ static struct virtqueue *mic_find_vq(struct virtio_device *vdev, /* First assign the vring's allocated in host memory */ vqconfig = mic_vq_config(mvdev->desc) + index; memcpy_fromio(&config, vqconfig, sizeof(config)); - _vr_size = vring_size(config.num, MIC_VIRTIO_RING_ALIGN); + _vr_size = vring_size(le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN); vr_size = PAGE_ALIGN(_vr_size + sizeof(struct _mic_vring_info)); - va = mic_card_map(mvdev->mdev, config.address, vr_size); + va = mic_card_map(mvdev->mdev, le64_to_cpu(config.address), vr_size); if (!va) return ERR_PTR(-ENOMEM); mvdev->vr[index] = va; memset_io(va, 0x0, _vr_size); - vq = vring_new_virtqueue(index, - config.num, MIC_VIRTIO_RING_ALIGN, vdev, - false, - va, mic_notify, callback, name); + vq = vring_new_virtqueue(index, le16_to_cpu(config.num), + MIC_VIRTIO_RING_ALIGN, vdev, false, va, + mic_notify, callback, name); if (!vq) { err = -ENOMEM; goto unmap; @@ -273,7 +272,8 @@ static struct virtqueue *mic_find_vq(struct virtio_device *vdev, /* Allocate and reassign used ring now */ mvdev->used_size[index] = PAGE_ALIGN(sizeof(__u16) * 3 + - sizeof(struct vring_used_elem) * config.num); + sizeof(struct vring_used_elem) * + le16_to_cpu(config.num)); used = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(mvdev->used_size[index])); if (!used) { diff --git a/drivers/misc/mic/host/mic_boot.c b/drivers/misc/mic/host/mic_boot.c index 7558d9186438..b75c6b5cc20f 100644 --- a/drivers/misc/mic/host/mic_boot.c +++ b/drivers/misc/mic/host/mic_boot.c @@ -62,7 +62,7 @@ void mic_bootparam_init(struct mic_device *mdev) { struct mic_bootparam *bootparam = mdev->dp; - bootparam->magic = MIC_MAGIC; + bootparam->magic = cpu_to_le32(MIC_MAGIC); bootparam->c2h_shutdown_db = mdev->shutdown_db; bootparam->h2c_shutdown_db = -1; bootparam->h2c_config_db = -1; diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c index efe8da4401e9..453d7409da9c 100644 --- a/drivers/misc/mic/host/mic_virtio.c +++ b/drivers/misc/mic/host/mic_virtio.c @@ -293,8 +293,8 @@ static void mic_virtio_init_post(struct mic_vdev *mvdev) continue; } mvdev->mvr[i].vrh.vring.used = - mvdev->mdev->aper.va + - le64_to_cpu(vqconfig[i].used_address); + mvdev->mdev->aper.va + + le64_to_cpu(vqconfig[i].used_address); } mvdev->dc->used_address_updated = 0; @@ -525,6 +525,7 @@ int mic_virtio_add_device(struct mic_vdev *mvdev, char irqname[10]; struct mic_bootparam *bootparam = mdev->dp; u16 num; + dma_addr_t vr_addr; mutex_lock(&mdev->mic_mutex); @@ -559,17 +560,16 @@ int mic_virtio_add_device(struct mic_vdev *mvdev, } vr->len = vr_size; vr->info = vr->va + vring_size(num, MIC_VIRTIO_RING_ALIGN); - vr->info->magic = MIC_MAGIC + mvdev->virtio_id + i; - vqconfig[i].address = mic_map_single(mdev, - vr->va, vr_size); - if (mic_map_error(vqconfig[i].address)) { + vr->info->magic = cpu_to_le32(MIC_MAGIC + mvdev->virtio_id + i); + vr_addr = mic_map_single(mdev, vr->va, vr_size); + if (mic_map_error(vr_addr)) { free_pages((unsigned long)vr->va, get_order(vr_size)); ret = -ENOMEM; dev_err(mic_dev(mvdev), "%s %d err %d\n", __func__, __LINE__, ret); goto err; } - vqconfig[i].address = cpu_to_le64(vqconfig[i].address); + vqconfig[i].address = cpu_to_le64(vr_addr); vring_init(&vr->vr, num, vr->va, MIC_VIRTIO_RING_ALIGN); ret = vringh_init_kern(&mvr->vrh, diff --git a/drivers/misc/mic/host/mic_x100.c b/drivers/misc/mic/host/mic_x100.c index 81e9541b784c..0dfa8a81436e 100644 --- a/drivers/misc/mic/host/mic_x100.c +++ b/drivers/misc/mic/host/mic_x100.c @@ -397,8 +397,8 @@ mic_x100_load_ramdisk(struct mic_device *mdev) * so copy over the ramdisk @ 128M. */ memcpy_toio(mdev->aper.va + (mdev->bootaddr << 1), fw->data, fw->size); - iowrite32(cpu_to_le32(mdev->bootaddr << 1), &bp->hdr.ramdisk_image); - iowrite32(cpu_to_le32(fw->size), &bp->hdr.ramdisk_size); + iowrite32(mdev->bootaddr << 1, &bp->hdr.ramdisk_image); + iowrite32(fw->size, &bp->hdr.ramdisk_size); release_firmware(fw); error: return rc; diff --git a/include/uapi/linux/mic_common.h b/include/uapi/linux/mic_common.h index d0ec46d88d2a..6eb40244e019 100644 --- a/include/uapi/linux/mic_common.h +++ b/include/uapi/linux/mic_common.h @@ -43,7 +43,7 @@ struct mic_device_desc { __u8 feature_len; __u8 config_len; __u8 status; - __u64 config[0]; + __le64 config[0]; } __attribute__ ((aligned(8))); /** @@ -61,7 +61,7 @@ struct mic_device_desc { * @h2c_vdev_db: The doorbell number to be used by host. Set by guest. */ struct mic_device_ctrl { - __u64 vdev; + __le64 vdev; __u8 config_change; __u8 vdev_reset; __u8 guest_ack; @@ -82,7 +82,7 @@ struct mic_device_ctrl { * @shutdown_card: Set to 1 by the host when a card shutdown is initiated */ struct mic_bootparam { - __u32 magic; + __le32 magic; __s8 c2h_shutdown_db; __s8 h2c_shutdown_db; __s8 h2c_config_db; @@ -111,9 +111,9 @@ struct mic_device_page { * @num: The number of entries in the virtio_ring */ struct mic_vqconfig { - __u64 address; - __u64 used_address; - __u16 num; + __le64 address; + __le64 used_address; + __le16 num; } __attribute__ ((aligned(8))); /* @@ -149,7 +149,7 @@ struct mic_vqconfig { */ struct _mic_vring_info { __u16 avail_idx; - int magic; + __le32 magic; }; /** -- cgit v1.2.3 From 23fd78d76415729b338ff1802a0066b4a62f7fb8 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 2 Dec 2013 11:24:18 +0000 Subject: KEYS: Fix multiple key add into associative array If sufficient keys (or keyrings) are added into a keyring such that a node in the associative array's tree overflows (each node has a capacity N, currently 16) and such that all N+1 keys have the same index key segment for that level of the tree (the level'th nibble of the index key), then assoc_array_insert() calls ops->diff_objects() to indicate at which bit position the two index keys vary. However, __key_link_begin() passes a NULL object to assoc_array_insert() with the intention of supplying the correct pointer later before we commit the change. This means that keyring_diff_objects() is given a NULL pointer as one of its arguments which it does not expect. This results in an oops like the attached. With the previous patch to fix the keyring hash function, this can be forced much more easily by creating a keyring and only adding keyrings to it. Add any other sort of key and a different insertion path is taken - all 16+1 objects must want to cluster in the same node slot. This can be tested by: r=`keyctl newring sandbox @s` for ((i=0; i<=16; i++)); do keyctl newring ring$i $r; done This should work fine, but oopses when the 17th keyring is added. Since ops->diff_objects() is always called with the first pointer pointing to the object to be inserted (ie. the NULL pointer), we can fix the problem by changing the to-be-inserted object pointer to point to the index key passed into assoc_array_insert() instead. Whilst we're at it, we also switch the arguments so that they are the same as for ->compare_object(). BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [] hash_key_type_and_desc+0x18/0xb0 ... RIP: 0010:[] hash_key_type_and_desc+0x18/0xb0 ... Call Trace: [] keyring_diff_objects+0x21/0xd2 [] assoc_array_insert+0x3b6/0x908 [] __key_link_begin+0x78/0xe5 [] key_create_or_update+0x17d/0x36a [] SyS_add_key+0x123/0x183 [] tracesys+0xdd/0xe2 Signed-off-by: David Howells Tested-by: Stephen Gallagher --- Documentation/assoc_array.txt | 6 +++--- include/linux/assoc_array.h | 6 +++--- lib/assoc_array.c | 4 ++-- security/keys/keyring.c | 7 +++---- 4 files changed, 11 insertions(+), 12 deletions(-) (limited to 'Documentation') diff --git a/Documentation/assoc_array.txt b/Documentation/assoc_array.txt index f4faec0f66e4..2f2c6cdd73c0 100644 --- a/Documentation/assoc_array.txt +++ b/Documentation/assoc_array.txt @@ -164,10 +164,10 @@ This points to a number of methods, all of which need to be provided: (4) Diff the index keys of two objects. - int (*diff_objects)(const void *a, const void *b); + int (*diff_objects)(const void *object, const void *index_key); - Return the bit position at which the index keys of two objects differ or - -1 if they are the same. + Return the bit position at which the index key of the specified object + differs from the given index key or -1 if they are the same. (5) Free an object. diff --git a/include/linux/assoc_array.h b/include/linux/assoc_array.h index 9a193b84238a..a89df3be1686 100644 --- a/include/linux/assoc_array.h +++ b/include/linux/assoc_array.h @@ -41,10 +41,10 @@ struct assoc_array_ops { /* Is this the object we're looking for? */ bool (*compare_object)(const void *object, const void *index_key); - /* How different are two objects, to a bit position in their keys? (or - * -1 if they're the same) + /* How different is an object from an index key, to a bit position in + * their keys? (or -1 if they're the same) */ - int (*diff_objects)(const void *a, const void *b); + int (*diff_objects)(const void *object, const void *index_key); /* Method to free an object. */ void (*free_object)(void *object); diff --git a/lib/assoc_array.c b/lib/assoc_array.c index 17edeaf19180..1b6a44f1ec3e 100644 --- a/lib/assoc_array.c +++ b/lib/assoc_array.c @@ -759,8 +759,8 @@ all_leaves_cluster_together: pr_devel("all leaves cluster together\n"); diff = INT_MAX; for (i = 0; i < ASSOC_ARRAY_FAN_OUT; i++) { - int x = ops->diff_objects(assoc_array_ptr_to_leaf(edit->leaf), - assoc_array_ptr_to_leaf(node->slots[i])); + int x = ops->diff_objects(assoc_array_ptr_to_leaf(node->slots[i]), + index_key); if (x < diff) { BUG_ON(x < 0); diff = x; diff --git a/security/keys/keyring.c b/security/keys/keyring.c index 0adbc77a59b9..3dd8445cd489 100644 --- a/security/keys/keyring.c +++ b/security/keys/keyring.c @@ -279,12 +279,11 @@ static bool keyring_compare_object(const void *object, const void *data) * Compare the index keys of a pair of objects and determine the bit position * at which they differ - if they differ. */ -static int keyring_diff_objects(const void *_a, const void *_b) +static int keyring_diff_objects(const void *object, const void *data) { - const struct key *key_a = keyring_ptr_to_key(_a); - const struct key *key_b = keyring_ptr_to_key(_b); + const struct key *key_a = keyring_ptr_to_key(object); const struct keyring_index_key *a = &key_a->index_key; - const struct keyring_index_key *b = &key_b->index_key; + const struct keyring_index_key *b = data; unsigned long seg_a, seg_b; int level, i; -- cgit v1.2.3 From f04bda90392b729fea9b0420b2a87aa6f2abfcd9 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 7 Nov 2013 20:58:16 -0600 Subject: dt-bindings: add ARMv8 PMU binding Add missing "arm,armv8-pmuv3" compatible property for ARMv8 PMU. Signed-off-by: Rob Herring Cc: Will Deacon Cc: Pawel Moll Acked-by: Mark Rutland Cc: Ian Campbell --- Documentation/devicetree/bindings/arm/pmu.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt index 343781b9f246..3e1e498fea96 100644 --- a/Documentation/devicetree/bindings/arm/pmu.txt +++ b/Documentation/devicetree/bindings/arm/pmu.txt @@ -7,6 +7,7 @@ representation in the device tree should be done as under:- Required properties: - compatible : should be one of + "arm,armv8-pmuv3" "arm,cortex-a15-pmu" "arm,cortex-a9-pmu" "arm,cortex-a8-pmu" -- cgit v1.2.3 From f1e8e3811486b858bcc7190477bc6e4ea8f3488c Mon Sep 17 00:00:00 2001 From: Sricharan R Date: Fri, 8 Nov 2013 16:08:48 +0530 Subject: ARM: dts: doc: Document missing binding for omap5-mpu The binding and support for omap5-mpu which has a cortex-a15 smp core, gic and integrated L2 cache has been existing for sometime. So Documenting the missing binding here. Cc: Benoit Cousson Signed-off-by: Sricharan R Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/omap/mpu.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt index 1a5a42ce21bb..83f405bde138 100644 --- a/Documentation/devicetree/bindings/arm/omap/mpu.txt +++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt @@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM. Required properties: - compatible : Should be "ti,omap3-mpu" for OMAP3 Should be "ti,omap4-mpu" for OMAP4 + Should be "ti,omap5-mpu" for OMAP5 - ti,hwmods: "mpu" Examples: +- For an OMAP5 SMP system: + +mpu { + compatible = "ti,omap5-mpu"; + ti,hwmods = "mpu" +}; + - For an OMAP4 SMP system: mpu { -- cgit v1.2.3 From 21ea02686164a71f1d464835c602c3fe2a0f3d61 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 18 Nov 2013 11:28:07 -0200 Subject: Documentation: net: fsl-fec.txt: Add phy-supply entry phy-supply is an optional property of the fec driver, so add it to the binding documentation. Signed-off-by: Fabio Estevam Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/net/fsl-fec.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index d53639221403..845ff848d895 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -15,6 +15,7 @@ Optional properties: only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are invalid and 1 millisecond will be used instead. +- phy-supply: regulator that powers the Ethernet PHY. Example: @@ -25,4 +26,5 @@ ethernet@83fec000 { phy-mode = "mii"; phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ local-mac-address = [00 04 9F 01 1B B9]; + phy-supply = <®_fec_supply>; }; -- cgit v1.2.3 From 53d6b36020c76b7d77514ec08394a75cb9deab08 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 18 Nov 2013 11:11:19 +0100 Subject: of: Add vendor prefix for LG Corporation Signed-off-by: Thierry Reding Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ce95ed1c6d3e..e986fbe26465 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -38,6 +38,7 @@ ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. img Imagination Technologies Ltd. intercontrol Inter Control Group +lg LG Corporation linux Linux-specific binding lsi LSI Corp. (LSI Logic) marvell Marvell Technology Group Ltd. -- cgit v1.2.3 From cdbea09819fc5f2ad84f1ffa218999632f0857a7 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 18 Nov 2013 12:46:12 +0100 Subject: clk: exynos: Fix typos in DT bindings documentation s/comptible/compatible/ Signed-off-by: Laurent Pinchart Reviewed-by: Sachin Kamat Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/clock/exynos4-clock.txt | 2 +- Documentation/devicetree/bindings/clock/exynos5250-clock.txt | 2 +- Documentation/devicetree/bindings/clock/exynos5420-clock.txt | 2 +- Documentation/devicetree/bindings/clock/exynos5440-clock.txt | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt index c6bf8a6c8f52..a2ac2d9ac71a 100644 --- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -6,7 +6,7 @@ SoC's in the Exynos4 family. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC. - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC. diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt index 24765c146e31..46f5c791ea0d 100644 --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC. - reg: physical base address of the controller and length of memory mapped diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt index 32aa34ecad36..458f34789e5d 100644 --- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC. - reg: physical base address of the controller and length of memory mapped diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt index 4499e9966bc9..9955dc9c7d96 100644 --- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC. Required Properties: -- comptible: should be "samsung,exynos5440-clock". +- compatible: should be "samsung,exynos5440-clock". - reg: physical base address of the controller and length of memory mapped region. -- cgit v1.2.3 From dd622d2506a63f0d9cf7b3beaad12f012308a39f Mon Sep 17 00:00:00 2001 From: Wei Ni Date: Wed, 13 Nov 2013 18:59:09 +0800 Subject: of: add vendor prefix for GMT Adding Global Mixed-mode Technology Inc. to the list of devicetree vendor prefixes. Signed-off-by: Wei Ni Acked-by: Stephen Warren Reviewed-by: Jean Delvare Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index e986fbe26465..edbb8d88c85e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -32,6 +32,7 @@ est ESTeem Wireless Modems fsl Freescale Semiconductor GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. +gmt Global Mixed-mode Technology, Inc. hisilicon Hisilicon Limited. hp Hewlett Packard ibm International Business Machines (IBM) -- cgit v1.2.3 From 1675088f8bc3f955e9bd31418a6b3319487f27bf Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Wed, 23 Oct 2013 10:44:50 +0900 Subject: hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv) This patch fix typo of property name from 'pullup-uV' to 'pullup-uv'. The ntc_thermistor.c use 'pullup-uv' when parsing dt data. Signed-off-by: Chanwoo Choi Reviewed-by: Jingoo Han Acked-by: Naveen Krishna Chatradhi Reviewed-by: Tomasz Figa Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt index 47ada1dff216..5d49f2b37f68 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt @@ -49,7 +49,7 @@ adc@12D10000 { /* NTC thermistor is a hwmon device */ ncp15wb473@0 { compatible = "ntc,ncp15wb473"; - pullup-uV = <1800000>; + pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 4>; -- cgit v1.2.3 From 72d944ec7eeb195db96942d5a9f907a312e23313 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 25 Nov 2013 15:37:55 -0700 Subject: ARM: tegra: delete nvidia,tegra20-spi.txt binding This binding shouldn't exist; Tegra20 has two forms of SPI controller that are documented separately in nvidia,tegra20-sflash.txt and nvidia,tegra20-slink.txt. Signed-off-by: Stephen Warren Reviewed-by: Thierry Reding Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt | 5 ----- 1 file changed, 5 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt deleted file mode 100644 index 6b9e51896693..000000000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt +++ /dev/null @@ -1,5 +0,0 @@ -NVIDIA Tegra 2 SPI device - -Required properties: -- compatible : should be "nvidia,tegra20-spi". -- gpios : should specify GPIOs used for chipselect. -- cgit v1.2.3 From 2c0e641a963d073d60cb63c24614c642b6f64b21 Mon Sep 17 00:00:00 2001 From: Gerhard Sittig Date: Thu, 21 Nov 2013 09:41:44 +0100 Subject: dt: binding: reword PowerPC 8xxx GPIO documentation re-format and re-word the device tree binding documentation for MPC8xxx and compatibles, reference the common document for interrupt controllers and remove outdated duplicate SoC specific information Cc: Mark Rutland Cc: Rob Herring Cc: Pawel Moll Cc: Arnd Bergmann Cc: Acked-by: Arnd Bergmann Signed-off-by: Gerhard Sittig Signed-off-by: Rob Herring --- .../devicetree/bindings/gpio/8xxx_gpio.txt | 66 +++++++++++++--------- 1 file changed, 40 insertions(+), 26 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt index b0019eb5330e..798cfc9d3839 100644 --- a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt +++ b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt @@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on Every GPIO controller node must have #gpio-cells property defined, this information will be used to translate gpio-specifiers. +See bindings/gpio/gpio.txt for details of how to specify GPIO +information for devices. + +The GPIO module usually is connected to the SoC's internal interrupt +controller, see bindings/interrupt-controller/interrupts.txt (the +interrupt client nodes section) for details how to specify this GPIO +module's interrupt. + +The GPIO module may serve as another interrupt controller (cascaded to +the SoC's internal interrupt controller). See the interrupt controller +nodes section in bindings/interrupt-controller/interrupts.txt for +details. Required properties: -- compatible : "fsl,-gpio" followed by "fsl,mpc8349-gpio" for - 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). - - interrupts : Interrupt mapping for GPIO IRQ. - - interrupt-parent : Phandle for the interrupt controller that - services interrupts for this device. -- gpio-controller : Marks the port as GPIO controller. +- compatible: "fsl,-gpio" followed by "fsl,mpc8349-gpio" + for 83xx, "fsl,mpc8572-gpio" for 85xx, or + "fsl,mpc8610-gpio" for 86xx. +- #gpio-cells: Should be two. The first cell is the pin number + and the second cell is used to specify optional + parameters (currently unused). +- interrupt-parent: Phandle for the interrupt controller that + services interrupts for this device. +- interrupts: Interrupt mapping for GPIO IRQ. +- gpio-controller: Marks the port as GPIO controller. + +Optional properties: +- interrupt-controller: Empty boolean property which marks the GPIO + module as an IRQ controller. +- #interrupt-cells: Should be two. Defines the number of integer + cells required to specify an interrupt within + this interrupt controller. The first cell + defines the pin number, the second cell + defines additional flags (trigger type, + trigger polarity). Note that the available + set of trigger conditions supported by the + GPIO module depends on the actual SoC. Example of gpio-controller nodes for a MPC8347 SoC: @@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC: #gpio-cells = <2>; compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; reg = <0xc00 0x100>; - interrupts = <74 0x8>; interrupt-parent = <&ipic>; + interrupts = <74 0x8>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; }; gpio2: gpio-controller@d00 { #gpio-cells = <2>; compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; reg = <0xd00 0x100>; - interrupts = <75 0x8>; interrupt-parent = <&ipic>; + interrupts = <75 0x8>; gpio-controller; }; -See booting-without-of.txt for details of how to specify GPIO -information for devices. - -To use GPIO pins as interrupt sources for peripherals, specify the -GPIO controller as the interrupt parent and define GPIO number + -trigger mode using the interrupts property, which is defined like -this: - -interrupts = , where: - - number: GPIO pin (0..31) - - trigger: trigger mode: - 2 = trigger on falling edge - 3 = trigger on both edges - -Example of device using this is: +Example of a peripheral using the GPIO module as an IRQ controller: funkyfpga@0 { compatible = "funky-fpga"; ... - interrupts = <4 3>; interrupt-parent = <&gpio1>; + interrupts = <4 3>; }; -- cgit v1.2.3 From 56a39aac593a7e855bed357b1ce43eeb7a99e7e2 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Sat, 23 Nov 2013 19:32:20 +0900 Subject: Documentation: gpiolib: add 00-INDEX file Give a short overview of the various GPIO documentation files. Signed-off-by: Alexandre Courbot Signed-off-by: Linus Walleij --- Documentation/gpio/00-INDEX | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 Documentation/gpio/00-INDEX (limited to 'Documentation') diff --git a/Documentation/gpio/00-INDEX b/Documentation/gpio/00-INDEX new file mode 100644 index 000000000000..1de43ae46ae6 --- /dev/null +++ b/Documentation/gpio/00-INDEX @@ -0,0 +1,14 @@ +00-INDEX + - This file +gpio.txt + - Introduction to GPIOs and their kernel interfaces +consumer.txt + - How to obtain and use GPIOs in a driver +driver.txt + - How to write a GPIO driver +board.txt + - How to assign GPIOs to a consumer device and a function +sysfs.txt + - Information about the GPIO sysfs interface +gpio-legacy.txt + - Historical documentation of the deprecated GPIO integer interface -- cgit v1.2.3 From c1b96a236e94d49d9396d0bbceb5524519c5c66e Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 21 May 2013 05:11:35 -0300 Subject: [media] videobuf2: Add support for file access mode flags for DMABUF exporting Currently it is not possible for userspace to map a DMABUF exported buffer with write permissions. This patch allows to also pass O_RDONLY/O_RDWR when exporting the buffer, so that userspace may map it with write permissions. Signed-off-by: Philipp Zabel Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/vidioc-expbuf.xml | 8 +++++--- drivers/media/v4l2-core/videobuf2-core.c | 8 ++++---- drivers/media/v4l2-core/videobuf2-dma-contig.c | 4 ++-- include/media/videobuf2-core.h | 2 +- 4 files changed, 12 insertions(+), 10 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml index e287c8fc803b..4165e7bfa4ff 100644 --- a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml @@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active format. For the single-planar API, applications must set plane to zero. Additional flags may be posted in the flags field. Refer to a manual for open() for details. -Currently only O_CLOEXEC is supported. All other fields must be set to zero. +Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported. All +other fields must be set to zero. In the case of multi-planar API, every plane is exported separately using multiple VIDIOC_EXPBUF calls. @@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. __u32 flags Flags for the newly created file, currently only -O_CLOEXEC is supported, refer to the manual of open() for more -details. +O_CLOEXEC , O_RDONLY, O_WRONLY +, and O_RDWR are supported, refer to the manual +of open() for more details. __s32 diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index b19b306c8f7f..57ba131f08ad 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -1824,8 +1824,8 @@ int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb) return -EINVAL; } - if (eb->flags & ~O_CLOEXEC) { - dprintk(1, "Queue does support only O_CLOEXEC flag\n"); + if (eb->flags & ~(O_CLOEXEC | O_ACCMODE)) { + dprintk(1, "Queue does support only O_CLOEXEC and access mode flags\n"); return -EINVAL; } @@ -1848,14 +1848,14 @@ int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb) vb_plane = &vb->planes[eb->plane]; - dbuf = call_memop(q, get_dmabuf, vb_plane->mem_priv); + dbuf = call_memop(q, get_dmabuf, vb_plane->mem_priv, eb->flags & O_ACCMODE); if (IS_ERR_OR_NULL(dbuf)) { dprintk(1, "Failed to export buffer %d, plane %d\n", eb->index, eb->plane); return -EINVAL; } - ret = dma_buf_fd(dbuf, eb->flags); + ret = dma_buf_fd(dbuf, eb->flags & ~O_ACCMODE); if (ret < 0) { dprintk(3, "buffer %d, plane %d failed to export (%d)\n", eb->index, eb->plane, ret); diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c index 646f08f4f504..33d3871d1e13 100644 --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c @@ -393,7 +393,7 @@ static struct sg_table *vb2_dc_get_base_sgt(struct vb2_dc_buf *buf) return sgt; } -static struct dma_buf *vb2_dc_get_dmabuf(void *buf_priv) +static struct dma_buf *vb2_dc_get_dmabuf(void *buf_priv, unsigned long flags) { struct vb2_dc_buf *buf = buf_priv; struct dma_buf *dbuf; @@ -404,7 +404,7 @@ static struct dma_buf *vb2_dc_get_dmabuf(void *buf_priv) if (WARN_ON(!buf->sgt_base)) return NULL; - dbuf = dma_buf_export(buf, &vb2_dc_dmabuf_ops, buf->size, 0); + dbuf = dma_buf_export(buf, &vb2_dc_dmabuf_ops, buf->size, flags); if (IS_ERR(dbuf)) return NULL; diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h index bd8218b15009..941055e9d125 100644 --- a/include/media/videobuf2-core.h +++ b/include/media/videobuf2-core.h @@ -83,7 +83,7 @@ struct vb2_fileio_data; struct vb2_mem_ops { void *(*alloc)(void *alloc_ctx, unsigned long size, gfp_t gfp_flags); void (*put)(void *buf_priv); - struct dma_buf *(*get_dmabuf)(void *buf_priv); + struct dma_buf *(*get_dmabuf)(void *buf_priv, unsigned long flags); void *(*get_userptr)(void *alloc_ctx, unsigned long vaddr, unsigned long size, int write); -- cgit v1.2.3 From 83f539e1a45a07934f0da69dc545bcbde01de36c Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 26 Nov 2013 11:03:54 -0500 Subject: dm cache: update Documentation for invalidate_cblocks's range syntax The cache target's invalidate_cblocks message allows cache block (cblock) ranges to be expressed with: - The range's value is "one past the end", so the range includes through -1. Signed-off-by: Mike Snitzer Acked-by: Joe Thornber --- Documentation/device-mapper/cache.txt | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt index 274752f8bdf9..719320b5ed3f 100644 --- a/Documentation/device-mapper/cache.txt +++ b/Documentation/device-mapper/cache.txt @@ -266,10 +266,12 @@ E.g. Invalidation is removing an entry from the cache without writing it back. Cache blocks can be invalidated via the invalidate_cblocks message, which takes an arbitrary number of cblock ranges. Each cblock -must be expressed as a decimal value, in the future a variant message -that takes cblock ranges expressed in hexidecimal may be needed to -better support efficient invalidation of larger caches. The cache must -be in passthrough mode when invalidate_cblocks is used. +range's end value is "one past the end", meaning 5-10 expresses a range +of values from 5 to 9. Each cblock must be expressed as a decimal +value, in the future a variant message that takes cblock ranges +expressed in hexidecimal may be needed to better support efficient +invalidation of larger caches. The cache must be in passthrough mode +when invalidate_cblocks is used. invalidate_cblocks [|-]* -- cgit v1.2.3 From 3f823c15d53dc78b50d6f561caf36e8109df1193 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 11 Dec 2013 13:04:27 -0800 Subject: net: smc91x: Fix device tree based configuration so it's usable Commit 89ce376c6bdc (drivers/net: Use of_match_ptr() macro in smc91x.c) added minimal device tree support to smc91x, but it's not working on many platforms because of the lack of some key configuration bits. Fix the issue by parsing the necessary configuration like the smc911x driver is doing. As most smc91x users seem to use 16-bit access, let's default to that if no reg-io-width is specified. Cc: Nicolas Pitre Cc: Mark Rutland Cc: netdev@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren Signed-off-by: David S. Miller --- .../devicetree/bindings/net/smsc-lan91c111.txt | 4 ++ drivers/net/ethernet/smsc/smc91x.c | 45 +++++++++++++++++----- 2 files changed, 39 insertions(+), 10 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt index 953049b4248a..5a41a8658daa 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt @@ -8,3 +8,7 @@ Required properties: Optional properties: - phy-device : phandle to Ethernet phy - local-mac-address : Ethernet mac address to use +- reg-io-width : Mask of sizes (in bytes) of the IO accesses that + are supported on the device. Valid value for SMSC LAN91c111 are + 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning + 16-bit access only. diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 0c9b5d94154f..8bf29eb4a5a0 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -82,6 +82,7 @@ static const char version[] = #include #include #include +#include #include #include @@ -2184,6 +2185,15 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * } } +#if IS_BUILTIN(CONFIG_OF) +static const struct of_device_id smc91x_match[] = { + { .compatible = "smsc,lan91c94", }, + { .compatible = "smsc,lan91c111", }, + {}, +}; +MODULE_DEVICE_TABLE(of, smc91x_match); +#endif + /* * smc_init(void) * Input parameters: @@ -2198,6 +2208,7 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * static int smc_drv_probe(struct platform_device *pdev) { struct smc91x_platdata *pd = dev_get_platdata(&pdev->dev); + const struct of_device_id *match = NULL; struct smc_local *lp; struct net_device *ndev; struct resource *res, *ires; @@ -2217,11 +2228,34 @@ static int smc_drv_probe(struct platform_device *pdev) */ lp = netdev_priv(ndev); + lp->cfg.flags = 0; if (pd) { memcpy(&lp->cfg, pd, sizeof(lp->cfg)); lp->io_shift = SMC91X_IO_SHIFT(lp->cfg.flags); - } else { + } + +#if IS_BUILTIN(CONFIG_OF) + match = of_match_device(of_match_ptr(smc91x_match), &pdev->dev); + if (match) { + struct device_node *np = pdev->dev.of_node; + u32 val; + + /* Combination of IO widths supported, default to 16-bit */ + if (!of_property_read_u32(np, "reg-io-width", &val)) { + if (val & 1) + lp->cfg.flags |= SMC91X_USE_8BIT; + if ((val == 0) || (val & 2)) + lp->cfg.flags |= SMC91X_USE_16BIT; + if (val & 4) + lp->cfg.flags |= SMC91X_USE_32BIT; + } else { + lp->cfg.flags |= SMC91X_USE_16BIT; + } + } +#endif + + if (!pd && !match) { lp->cfg.flags |= (SMC_CAN_USE_8BIT) ? SMC91X_USE_8BIT : 0; lp->cfg.flags |= (SMC_CAN_USE_16BIT) ? SMC91X_USE_16BIT : 0; lp->cfg.flags |= (SMC_CAN_USE_32BIT) ? SMC91X_USE_32BIT : 0; @@ -2370,15 +2404,6 @@ static int smc_drv_resume(struct device *dev) return 0; } -#ifdef CONFIG_OF -static const struct of_device_id smc91x_match[] = { - { .compatible = "smsc,lan91c94", }, - { .compatible = "smsc,lan91c111", }, - {}, -}; -MODULE_DEVICE_TABLE(of, smc91x_match); -#endif - static struct dev_pm_ops smc_drv_pm_ops = { .suspend = smc_drv_suspend, .resume = smc_drv_resume, -- cgit v1.2.3 From 188b04d580ab7acf11eb77cb564692050c10edfe Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sat, 14 Dec 2013 04:42:13 +0100 Subject: ipv4: improve documentation of ip_no_pmtu_disc Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 3c12d9a7ed00..8a984e994e61 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -16,8 +16,12 @@ ip_default_ttl - INTEGER Default: 64 (as recommended by RFC1700) ip_no_pmtu_disc - BOOLEAN - Disable Path MTU Discovery. - default FALSE + Disable Path MTU Discovery. If enabled and a + fragmentation-required ICMP is received, the PMTU to this + destination will be set to min_pmtu (see below). You will need + to raise min_pmtu to the smallest interface MTU on your system + manually if you want to avoid locally generated fragments. + Default: FALSE min_pmtu - INTEGER default 552 - minimum discovered Path MTU -- cgit v1.2.3