From 148750d736c44eecf10836ef7af397388e6194c3 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Fri, 4 Nov 2022 18:00:52 -0700 Subject: doc: Update whatisRCU.rst This commit updates whatisRCU.rst with wordsmithing and updates provokes by the passage of time. Signed-off-by: Paul E. McKenney --- Documentation/RCU/whatisRCU.rst | 193 ++++++++++++++++++++++++++-------------- 1 file changed, 125 insertions(+), 68 deletions(-) (limited to 'Documentation') diff --git a/Documentation/RCU/whatisRCU.rst b/Documentation/RCU/whatisRCU.rst index 1c747ac3f2c8..2c5563a91998 100644 --- a/Documentation/RCU/whatisRCU.rst +++ b/Documentation/RCU/whatisRCU.rst @@ -16,18 +16,23 @@ to start learning about RCU: | 6. The RCU API, 2019 Edition https://lwn.net/Articles/777036/ | 2019 Big API Table https://lwn.net/Articles/777165/ +For those preferring video: + +| 1. Unraveling RCU Mysteries: Fundamentals https://www.linuxfoundation.org/webinars/unraveling-rcu-usage-mysteries +| 2. Unraveling RCU Mysteries: Additional Use Cases https://www.linuxfoundation.org/webinars/unraveling-rcu-usage-mysteries-additional-use-cases + What is RCU? RCU is a synchronization mechanism that was added to the Linux kernel during the 2.5 development effort that is optimized for read-mostly -situations. Although RCU is actually quite simple once you understand it, -getting there can sometimes be a challenge. Part of the problem is that -most of the past descriptions of RCU have been written with the mistaken -assumption that there is "one true way" to describe RCU. Instead, -the experience has been that different people must take different paths -to arrive at an understanding of RCU. This document provides several -different paths, as follows: +situations. Although RCU is actually quite simple, making effective use +of it requires you to think differently about your code. Another part +of the problem is the mistaken assumption that there is "one true way" to +describe and to use RCU. Instead, the experience has been that different +people must take different paths to arrive at an understanding of RCU, +depending on their experiences and use cases. This document provides +several different paths, as follows: :ref:`1. RCU OVERVIEW <1_whatisRCU>` @@ -157,34 +162,36 @@ rcu_read_lock() ^^^^^^^^^^^^^^^ void rcu_read_lock(void); - Used by a reader to inform the reclaimer that the reader is - entering an RCU read-side critical section. It is illegal - to block while in an RCU read-side critical section, though - kernels built with CONFIG_PREEMPT_RCU can preempt RCU - read-side critical sections. Any RCU-protected data structure - accessed during an RCU read-side critical section is guaranteed to - remain unreclaimed for the full duration of that critical section. - Reference counts may be used in conjunction with RCU to maintain - longer-term references to data structures. + This temporal primitive is used by a reader to inform the + reclaimer that the reader is entering an RCU read-side critical + section. It is illegal to block while in an RCU read-side + critical section, though kernels built with CONFIG_PREEMPT_RCU + can preempt RCU read-side critical sections. Any RCU-protected + data structure accessed during an RCU read-side critical section + is guaranteed to remain unreclaimed for the full duration of that + critical section. Reference counts may be used in conjunction + with RCU to maintain longer-term references to data structures. rcu_read_unlock() ^^^^^^^^^^^^^^^^^ void rcu_read_unlock(void); - Used by a reader to inform the reclaimer that the reader is - exiting an RCU read-side critical section. Note that RCU - read-side critical sections may be nested and/or overlapping. + This temporal primitives is used by a reader to inform the + reclaimer that the reader is exiting an RCU read-side critical + section. Note that RCU read-side critical sections may be nested + and/or overlapping. synchronize_rcu() ^^^^^^^^^^^^^^^^^ void synchronize_rcu(void); - Marks the end of updater code and the beginning of reclaimer - code. It does this by blocking until all pre-existing RCU - read-side critical sections on all CPUs have completed. - Note that synchronize_rcu() will **not** necessarily wait for - any subsequent RCU read-side critical sections to complete. - For example, consider the following sequence of events:: + This temporal primitive marks the end of updater code and the + beginning of reclaimer code. It does this by blocking until + all pre-existing RCU read-side critical sections on all CPUs + have completed. Note that synchronize_rcu() will **not** + necessarily wait for any subsequent RCU read-side critical + sections to complete. For example, consider the following + sequence of events:: CPU 0 CPU 1 CPU 2 ----------------- ------------------------- --------------- @@ -211,13 +218,13 @@ synchronize_rcu() to be useful in all but the most read-intensive situations, synchronize_rcu()'s overhead must also be quite small. - The call_rcu() API is a callback form of synchronize_rcu(), - and is described in more detail in a later section. Instead of - blocking, it registers a function and argument which are invoked - after all ongoing RCU read-side critical sections have completed. - This callback variant is particularly useful in situations where - it is illegal to block or where update-side performance is - critically important. + The call_rcu() API is an asynchronous callback form of + synchronize_rcu(), and is described in more detail in a later + section. Instead of blocking, it registers a function and + argument which are invoked after all ongoing RCU read-side + critical sections have completed. This callback variant is + particularly useful in situations where it is illegal to block + or where update-side performance is critically important. However, the call_rcu() API should not be used lightly, as use of the synchronize_rcu() API generally results in simpler code. @@ -236,11 +243,13 @@ rcu_assign_pointer() would be cool to be able to declare a function in this manner. (Compiler experts will no doubt disagree.) - The updater uses this function to assign a new value to an + The updater uses this spatial macro to assign a new value to an RCU-protected pointer, in order to safely communicate the change - in value from the updater to the reader. This macro does not - evaluate to an rvalue, but it does execute any memory-barrier - instructions required for a given CPU architecture. + in value from the updater to the reader. This is a spatial (as + opposed to temporal) macro. It does not evaluate to an rvalue, + but it does execute any memory-barrier instructions required + for a given CPU architecture. Its ordering properties are that + of a store-release operation. Perhaps just as important, it serves to document (1) which pointers are protected by RCU and (2) the point at which a @@ -255,14 +264,15 @@ rcu_dereference() Like rcu_assign_pointer(), rcu_dereference() must be implemented as a macro. - The reader uses rcu_dereference() to fetch an RCU-protected - pointer, which returns a value that may then be safely - dereferenced. Note that rcu_dereference() does not actually - dereference the pointer, instead, it protects the pointer for - later dereferencing. It also executes any needed memory-barrier - instructions for a given CPU architecture. Currently, only Alpha - needs memory barriers within rcu_dereference() -- on other CPUs, - it compiles to nothing, not even a compiler directive. + The reader uses the spatial rcu_dereference() macro to fetch + an RCU-protected pointer, which returns a value that may + then be safely dereferenced. Note that rcu_dereference() + does not actually dereference the pointer, instead, it + protects the pointer for later dereferencing. It also + executes any needed memory-barrier instructions for a given + CPU architecture. Currently, only Alpha needs memory barriers + within rcu_dereference() -- on other CPUs, it compiles to a + volatile load. Common coding practice uses rcu_dereference() to copy an RCU-protected pointer to a local variable, then dereferences @@ -355,12 +365,15 @@ reader, updater, and reclaimer. synchronize_rcu() & call_rcu() -The RCU infrastructure observes the time sequence of rcu_read_lock(), +The RCU infrastructure observes the temporal sequence of rcu_read_lock(), rcu_read_unlock(), synchronize_rcu(), and call_rcu() invocations in order to determine when (1) synchronize_rcu() invocations may return to their callers and (2) call_rcu() callbacks may be invoked. Efficient implementations of the RCU infrastructure make heavy use of batching in order to amortize their overhead over many uses of the corresponding APIs. +The rcu_assign_pointer() and rcu_dereference() invocations communicate +spatial changes via stores to and loads from the RCU-protected pointer in +question. There are at least three flavors of RCU usage in the Linux kernel. The diagram above shows the most common one. On the updater side, the rcu_assign_pointer(), @@ -392,7 +405,9 @@ b. RCU applied to networking data structures that may be subjected c. RCU applied to scheduler and interrupt/NMI-handler tasks. Again, most uses will be of (a). The (b) and (c) cases are important -for specialized uses, but are relatively uncommon. +for specialized uses, but are relatively uncommon. The SRCU, RCU-Tasks, +RCU-Tasks-Rude, and RCU-Tasks-Trace have similar relationships among +their assorted primitives. .. _3_whatisRCU: @@ -468,7 +483,7 @@ So, to sum up: - Within an RCU read-side critical section, use rcu_dereference() to dereference RCU-protected pointers. -- Use some solid scheme (such as locks or semaphores) to +- Use some solid design (such as locks or semaphores) to keep concurrent updates from interfering with each other. - Use rcu_assign_pointer() to update an RCU-protected pointer. @@ -579,6 +594,14 @@ to avoid having to write your own callback:: kfree_rcu(old_fp, rcu); +If the occasional sleep is permitted, the single-argument form may +be used, omitting the rcu_head structure from struct foo. + + kfree_rcu(old_fp); + +This variant of kfree_rcu() almost never blocks, but might do so by +invoking synchronize_rcu() in response to memory-allocation failure. + Again, see checklist.rst for additional rules governing the use of RCU. .. _5_whatisRCU: @@ -596,7 +619,7 @@ lacking both functionality and performance. However, they are useful in getting a feel for how RCU works. See kernel/rcu/update.c for a production-quality implementation, and see: - http://www.rdrop.com/users/paulmck/RCU + https://docs.google.com/document/d/1X0lThx8OK0ZgLMqVoXiR4ZrGURHrXK6NyLRbeXe3Xac/edit for papers describing the Linux kernel RCU implementation. The OLS'01 and OLS'02 papers are a good introduction, and the dissertation provides @@ -929,6 +952,8 @@ unfortunately any spinlock in a ``SLAB_TYPESAFE_BY_RCU`` object must be initialized after each and every call to kmem_cache_alloc(), which renders reference-free spinlock acquisition completely unsafe. Therefore, when using ``SLAB_TYPESAFE_BY_RCU``, make proper use of a reference counter. +(Those willing to use a kmem_cache constructor may also use locking, +including cache-friendly sequence locking.) With traditional reference counting -- such as that implemented by the kref library in Linux -- there is typically code that runs when the last @@ -1047,6 +1072,30 @@ sched:: rcu_read_lock_sched_held +RCU-Tasks:: + + Critical sections Grace period Barrier + + N/A call_rcu_tasks rcu_barrier_tasks + synchronize_rcu_tasks + + +RCU-Tasks-Rude:: + + Critical sections Grace period Barrier + + N/A call_rcu_tasks_rude rcu_barrier_tasks_rude + synchronize_rcu_tasks_rude + + +RCU-Tasks-Trace:: + + Critical sections Grace period Barrier + + rcu_read_lock_trace call_rcu_tasks_trace rcu_barrier_tasks_trace + rcu_read_unlock_trace synchronize_rcu_tasks_trace + + SRCU:: Critical sections Grace period Barrier @@ -1087,35 +1136,43 @@ list can be helpful: a. Will readers need to block? If so, you need SRCU. -b. What about the -rt patchset? If readers would need to block - in an non-rt kernel, you need SRCU. If readers would block - in a -rt kernel, but not in a non-rt kernel, SRCU is not - necessary. (The -rt patchset turns spinlocks into sleeplocks, - hence this distinction.) +b. Will readers need to block and are you doing tracing, for + example, ftrace or BPF? If so, you need RCU-tasks, + RCU-tasks-rude, and/or RCU-tasks-trace. + +c. What about the -rt patchset? If readers would need to block in + an non-rt kernel, you need SRCU. If readers would block when + acquiring spinlocks in a -rt kernel, but not in a non-rt kernel, + SRCU is not necessary. (The -rt patchset turns spinlocks into + sleeplocks, hence this distinction.) -c. Do you need to treat NMI handlers, hardirq handlers, +d. Do you need to treat NMI handlers, hardirq handlers, and code segments with preemption disabled (whether via preempt_disable(), local_irq_save(), local_bh_disable(), or some other mechanism) as if they were explicit RCU readers? - If so, RCU-sched is the only choice that will work for you. - -d. Do you need RCU grace periods to complete even in the face - of softirq monopolization of one or more of the CPUs? For - example, is your code subject to network-based denial-of-service - attacks? If so, you should disable softirq across your readers, - for example, by using rcu_read_lock_bh(). - -e. Is your workload too update-intensive for normal use of + If so, RCU-sched readers are the only choice that will work + for you, but since about v4.20 you use can use the vanilla RCU + update primitives. + +e. Do you need RCU grace periods to complete even in the face of + softirq monopolization of one or more of the CPUs? For example, + is your code subject to network-based denial-of-service attacks? + If so, you should disable softirq across your readers, for + example, by using rcu_read_lock_bh(). Since about v4.20 you + use can use the vanilla RCU update primitives. + +f. Is your workload too update-intensive for normal use of RCU, but inappropriate for other synchronization mechanisms? If so, consider SLAB_TYPESAFE_BY_RCU (which was originally named SLAB_DESTROY_BY_RCU). But please be careful! -f. Do you need read-side critical sections that are respected - even though they are in the middle of the idle loop, during - user-mode execution, or on an offlined CPU? If so, SRCU is the - only choice that will work for you. +g. Do you need read-side critical sections that are respected even + on CPUs that are deep in the idle loop, during entry to or exit + from user-mode execution, or on an offlined CPU? If so, SRCU + and RCU Tasks Trace are the only choices that will work for you, + with SRCU being strongly preferred in almost all cases. -g. Otherwise, use RCU. +h. Otherwise, use RCU. Of course, this all assumes that you have determined that RCU is in fact the right tool for your job. -- cgit v1.2.3