From d6e6d5627f0aaa16d6b6e94238d62a594a35b5ce Mon Sep 17 00:00:00 2001 From: Michael Shych Date: Mon, 4 May 2020 17:14:27 +0300 Subject: docs: watchdog: mlx-wdt: Add description of new watchdog type 3 Add documentation with details of new type of Mellanox watchdog driver. Signed-off-by: Michael Shych Reviewed-by: Vadim Pasternak Acked-by: Guenter Roeck Link: https://lore.kernel.org/r/20200504141427.17685-5-michaelsh@mellanox.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- Documentation/watchdog/mlx-wdt.rst | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'Documentation') diff --git a/Documentation/watchdog/mlx-wdt.rst b/Documentation/watchdog/mlx-wdt.rst index bf5bafac47f0..35e690dea9db 100644 --- a/Documentation/watchdog/mlx-wdt.rst +++ b/Documentation/watchdog/mlx-wdt.rst @@ -24,10 +24,19 @@ Type 2: Maximum timeout is 255 sec. Get time-left is supported. +Type 3: + Same as Type 2 with extended maximum timeout period. + Maximum timeout is 65535 sec. + Type 1 HW watchdog implementation exist in old systems and all new systems have type 2 HW watchdog. Two types of HW implementation have also different register map. +Type 3 HW watchdog implementation can exist on all Mellanox systems +with new programmer logic device. +It's differentiated by WD capability bit. +Old systems still have only one main watchdog. + Mellanox system can have 2 watchdogs: main and auxiliary. Main and auxiliary watchdog devices can be enabled together on the same system. @@ -54,3 +63,4 @@ The driver checks during initialization if the previous system reset was done by the watchdog. If yes, it makes a notification about this event. Access to HW registers is performed through a generic regmap interface. +Programmable logic device registers have little-endian order. -- cgit v1.2.3 From 9807a8884143148f2ee5a882d6273806403e9345 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Sat, 30 May 2020 10:35:51 +0300 Subject: dt-bindings: watchdog: Convert DW WDT binding to DT schema Modern device tree bindings are supposed to be created as YAML-files in accordance with dt-schema. This commit replaces the DW Watchdog legacy bare text bindings with YAML file. As before the binding states that the corresponding dts node is supposed to have a registers range, a watchdog timer references clock source, optional reset line and pre-timeout interrupt. Signed-off-by: Serge Semin Reviewed-by: Rob Herring Reviewed-by: Guenter Roeck Cc: Alexey Malahov Cc: Thomas Bogendoerfer Cc: Arnd Bergmann Cc: linux-mips@vger.kernel.org Link: https://lore.kernel.org/r/20200530073557.22661-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- .../devicetree/bindings/watchdog/dw_wdt.txt | 24 ----------- .../devicetree/bindings/watchdog/snps,dw-wdt.yaml | 50 ++++++++++++++++++++++ 2 files changed, 50 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/watchdog/dw_wdt.txt create mode 100644 Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt deleted file mode 100644 index eb0914420c7c..000000000000 --- a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt +++ /dev/null @@ -1,24 +0,0 @@ -Synopsys Designware Watchdog Timer - -Required Properties: - -- compatible : Should contain "snps,dw-wdt" -- reg : Base address and size of the watchdog timer registers. -- clocks : phandle + clock-specifier for the clock that drives the - watchdog timer. - -Optional Properties: - -- interrupts : The interrupt used for the watchdog timeout warning. -- resets : phandle pointing to the system reset controller with - line index for the watchdog. - -Example: - - watchdog0: wd@ffd02000 { - compatible = "snps,dw-wdt"; - reg = <0xffd02000 0x1000>; - interrupts = <0 171 4>; - clocks = <&per_base_clk>; - resets = <&rst WDT0_RESET>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml new file mode 100644 index 000000000000..4f6944756ab4 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/snps,dw-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys Designware Watchdog Timer + +allOf: + - $ref: "watchdog.yaml#" + +maintainers: + - Jamie Iles + +properties: + compatible: + const: snps,dw-wdt + + reg: + maxItems: 1 + + interrupts: + description: DW Watchdog pre-timeout interrupt + maxItems: 1 + + clocks: + items: + - description: Watchdog timer reference clock + + resets: + description: Phandle to the DW Watchdog reset lane + maxItems: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - clocks + +examples: + - | + watchdog@ffd02000 { + compatible = "snps,dw-wdt"; + reg = <0xffd02000 0x1000>; + interrupts = <0 171 4>; + clocks = <&per_base_clk>; + resets = <&wdt_rst>; + }; +... -- cgit v1.2.3 From 5b4f68f808ff96a0a48456ff8da250a2caf3f545 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Sat, 30 May 2020 10:35:52 +0300 Subject: dt-bindings: watchdog: dw-wdt: Support devices with asynch clocks DW Watchdog IP core can be synthesised with asynchronous timer/APB clocks support (WDT_ASYNC_CLK_MODE_ENABLE == 1). In this case separate clock signals are supposed to be used to feed watchdog timer and APB interface of the device. Let's update the DW Watchdog DT node schema so it would support the optional APB3 bus clock specified along with the mandatory watchdog timer reference clock. Signed-off-by: Serge Semin Reviewed-by: Rob Herring Reviewed-by: Guenter Roeck Cc: Alexey Malahov Cc: Thomas Bogendoerfer Cc: Arnd Bergmann Cc: linux-mips@vger.kernel.org Link: https://lore.kernel.org/r/20200530073557.22661-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml index 4f6944756ab4..5bf6dc6377f3 100644 --- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml @@ -24,8 +24,16 @@ properties: maxItems: 1 clocks: + minItems: 1 items: - description: Watchdog timer reference clock + - description: APB3 interface clock + + clock-names: + minItems: 1 + items: + - const: tclk + - const: pclk resets: description: Phandle to the DW Watchdog reset lane -- cgit v1.2.3 From 4ce4e7fdc3c924ea3e6d5d68178127b46568d8df Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Sat, 30 May 2020 10:35:53 +0300 Subject: dt-bindings: watchdog: dw-wdt: Add watchdog TOPs array property In case if DW Watchdog IP core is built with WDT_USE_FIX_TOP == false, a custom timeout periods are used to preset the timer counter. In this case that periods should be specified in a new "snps,watchdog-tops" property of the DW watchdog dts node. Signed-off-by: Serge Semin Reviewed-by: Rob Herring Reviewed-by: Guenter Roeck Cc: Alexey Malahov Cc: Thomas Bogendoerfer Cc: Arnd Bergmann Cc: linux-mips@vger.kernel.org Link: https://lore.kernel.org/r/20200530073557.22661-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- .../devicetree/bindings/watchdog/snps,dw-wdt.yaml | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml index 5bf6dc6377f3..d9fc7bb851b1 100644 --- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml @@ -39,6 +39,23 @@ properties: description: Phandle to the DW Watchdog reset lane maxItems: 1 + snps,watchdog-tops: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + DW APB Watchdog custom timer intervals - Timeout Period ranges (TOPs). + Each TOP is a number loaded into the watchdog counter at the moment of + the timer restart. The counter decrementing happens each tick of the + reference clock. Therefore the TOPs array is equivalent to an array of + the timer expiration intervals supported by the DW APB Watchdog. Note + DW APB Watchdog IP-core might be synthesized with fixed TOP values, + in which case this property is unnecessary with default TOPs utilized. + default: [0x0001000 0x0002000 0x0004000 0x0008000 + 0x0010000 0x0020000 0x0040000 0x0080000 + 0x0100000 0x0200000 0x0400000 0x0800000 + 0x1000000 0x2000000 0x4000000 0x8000000] + minItems: 16 + maxItems: 16 + unevaluatedProperties: false required: @@ -55,4 +72,19 @@ examples: clocks = <&per_base_clk>; resets = <&wdt_rst>; }; + + - | + watchdog@ffd02000 { + compatible = "snps,dw-wdt"; + reg = <0xffd02000 0x1000>; + interrupts = <0 171 4>; + clocks = <&per_base_clk>; + clock-names = "tclk"; + snps,watchdog-tops = <0x000000FF 0x000001FF 0x000003FF + 0x000007FF 0x0000FFFF 0x0001FFFF + 0x0003FFFF 0x0007FFFF 0x000FFFFF + 0x001FFFFF 0x003FFFFF 0x007FFFFF + 0x00FFFFFF 0x01FFFFFF 0x03FFFFFF + 0x07FFFFFF>; + }; ... -- cgit v1.2.3 From 137e9e68dd3805deb9fa43b3eb1a963a2d093746 Mon Sep 17 00:00:00 2001 From: Sai Prakash Ranjan Date: Fri, 26 Jun 2020 00:59:04 +0530 Subject: dt-bindings: watchdog: Convert QCOM watchdog timer bindings to YAML Convert QCOM watchdog timer bindings to DT schema format using json-schema. Signed-off-by: Sai Prakash Ranjan Reviewed-by: Stephen Boyd Reviewed-by: Rob Herring Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/77b47aad9d17cb4ec8359bdbbb30c33d818117e6.1593112534.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- .../devicetree/bindings/watchdog/qcom-wdt.txt | 28 -------------- .../devicetree/bindings/watchdog/qcom-wdt.yaml | 44 ++++++++++++++++++++++ 2 files changed, 44 insertions(+), 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/watchdog/qcom-wdt.txt create mode 100644 Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt b/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt deleted file mode 100644 index 41aeaa2ff0f8..000000000000 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt +++ /dev/null @@ -1,28 +0,0 @@ -Qualcomm Krait Processor Sub-system (KPSS) Watchdog ---------------------------------------------------- - -Required properties : -- compatible : shall contain only one of the following: - - "qcom,kpss-wdt-msm8960" - "qcom,kpss-wdt-apq8064" - "qcom,kpss-wdt-ipq8064" - "qcom,kpss-wdt-ipq4019" - "qcom,kpss-timer" - "qcom,scss-timer" - "qcom,kpss-wdt" - -- reg : shall contain base register location and length -- clocks : shall contain the input clock - -Optional properties : -- timeout-sec : shall contain the default watchdog timeout in seconds, - if unset, the default timeout is 30 seconds - -Example: - watchdog@208a038 { - compatible = "qcom,kpss-wdt-ipq8064"; - reg = <0x0208a038 0x40>; - clocks = <&sleep_clk>; - timeout-sec = <10>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml new file mode 100644 index 000000000000..5448cc537a03 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/qcom-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Krait Processor Sub-system (KPSS) Watchdog timer + +maintainers: + - Sai Prakash Ranjan + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - qcom,kpss-timer + - qcom,kpss-wdt + - qcom,kpss-wdt-apq8064 + - qcom,kpss-wdt-ipq4019 + - qcom,kpss-wdt-ipq8064 + - qcom,kpss-wdt-msm8960 + - qcom,scss-timer + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +examples: + - | + watchdog@208a038 { + compatible = "qcom,kpss-wdt-ipq8064"; + reg = <0x0208a038 0x40>; + clocks = <&sleep_clk>; + timeout-sec = <10>; + }; -- cgit v1.2.3 From a4fd26f6187b13cace0f90029fe790799e34e4e2 Mon Sep 17 00:00:00 2001 From: Sai Prakash Ranjan Date: Fri, 26 Jun 2020 00:59:05 +0530 Subject: dt-bindings: watchdog: Add compatible for QCS404, SC7180, SDM845, SM8150 Add missing compatible for watchdog timer on QCS404, SC7180, SDM845 and SM8150 SoCs. Signed-off-by: Sai Prakash Ranjan Reviewed-by: Stephen Boyd Acked-by: Rob Herring Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/09da1ba319dc4a27ef4e4e177e67e68f1cb4f35b.1593112534.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml index 5448cc537a03..0709ddf0b6a5 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -15,6 +15,10 @@ allOf: properties: compatible: enum: + - qcom,apss-wdt-qcs404 + - qcom,apss-wdt-sc7180 + - qcom,apss-wdt-sdm845 + - qcom,apss-wdt-sm8150 - qcom,kpss-timer - qcom,kpss-wdt - qcom,kpss-wdt-apq8064 -- cgit v1.2.3 From d51d3852d1fd28409107274dc1d8077022cc0dc2 Mon Sep 17 00:00:00 2001 From: Ahmad Fatoum Date: Thu, 11 Jun 2020 21:17:42 +0200 Subject: docs: watchdog: codify ident.options as superset of possible status flags The FIXME comment has been in-tree since the very first git commit. The described behavior has been since relied on by some userspace, e.g. the util-linux wdctl command and has been ignored by some kernelspace, like the f71808e_wdt driver. The functionality is useful to have to be able to differentiate between a driver that doesn't support WDIOF_CARDRESET and one that does, but hasn't had a watchdog reset, thus drop the FIXME to encourage drivers adopting this convention. Signed-off-by: Ahmad Fatoum Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20200611191750.28096-2-a.fatoum@pengutronix.de Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- Documentation/watchdog/watchdog-api.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/watchdog/watchdog-api.rst b/Documentation/watchdog/watchdog-api.rst index c6c1e9fa9f73..800dcd7586f2 100644 --- a/Documentation/watchdog/watchdog-api.rst +++ b/Documentation/watchdog/watchdog-api.rst @@ -168,7 +168,7 @@ the fields returned in the ident struct are: the options field can have the following bits set, and describes what kind of information that the GET_STATUS and GET_BOOT_STATUS ioctls can -return. [FIXME -- Is this correct?] +return. ================ ========================= WDIOF_OVERHEAT Reset due to CPU overheat -- cgit v1.2.3 From d821ab28dfd2fa85a9aed133e9bfd368c156cc04 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 15 Jul 2020 12:09:06 +0100 Subject: dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support RZ/G2H (a.k.a. R8A774E1) watchdog implementation is compatible with R-Car Gen3, therefore add the relevant documentation. Signed-off-by: Lad Prabhakar Reviewed-by: Geert Uytterhoeven Reviewed-by: Guenter Roeck Acked-by: Rob Herring Link: https://lore.kernel.org/r/1594811350-14066-17-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml index 572f4c912fef..6933005b52bd 100644 --- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml @@ -41,6 +41,7 @@ properties: - renesas,r8a774a1-wdt # RZ/G2M - renesas,r8a774b1-wdt # RZ/G2N - renesas,r8a774c0-wdt # RZ/G2E + - renesas,r8a774e1-wdt # RZ/G2H - renesas,r8a7795-wdt # R-Car H3 - renesas,r8a7796-wdt # R-Car M3-W - renesas,r8a77961-wdt # R-Car M3-W+ -- cgit v1.2.3 From 2ab77a34d070b1611a52b50c7cfae074153d475b Mon Sep 17 00:00:00 2001 From: "Alexander A. Klimov" Date: Mon, 13 Jul 2020 22:58:21 +0200 Subject: watchdog: Replace HTTP links with HTTPS ones Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Reviewed-by: Guenter Roeck Acked-by: Rob Herring Link: https://lore.kernel.org/r/20200713205821.38223-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- Documentation/devicetree/bindings/watchdog/davinci-wdt.txt | 4 ++-- drivers/watchdog/Kconfig | 2 +- drivers/watchdog/dw_wdt.c | 2 +- drivers/watchdog/nv_tco.c | 2 +- drivers/watchdog/nv_tco.h | 2 +- drivers/watchdog/sp5100_tco.c | 2 +- 6 files changed, 7 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt index e60b9a13bdcb..aa10b8ec36e2 100644 --- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt @@ -11,8 +11,8 @@ Optional properties: See clock-bindings.txt Documentation: -Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf -Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf +Davinci DM646x - https://www.ti.com/lit/ug/spruer5b/spruer5b.pdf +Keystone - https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf Examples: diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 4f4687c46d38..ab7aad5a1e69 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -1027,7 +1027,7 @@ config ADVANTECH_WDT If you are configuring a Linux kernel for the Advantech single-board computer, say `Y' here to support its built-in watchdog timer feature. More information can be found at - + config ALIM1535_WDT tristate "ALi M1535 PMU Watchdog Timer" diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c index 4fec2c6a3c01..32d0e1781e63 100644 --- a/drivers/watchdog/dw_wdt.c +++ b/drivers/watchdog/dw_wdt.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2010-2011 Picochip Ltd., Jamie Iles - * http://www.picochip.com + * https://www.picochip.com * * This file implements a driver for the Synopsys DesignWare watchdog device * in the many subsystems. The watchdog has 16 different timeout periods diff --git a/drivers/watchdog/nv_tco.c b/drivers/watchdog/nv_tco.c index d15ad8583a59..f6902a337422 100644 --- a/drivers/watchdog/nv_tco.c +++ b/drivers/watchdog/nv_tco.c @@ -7,7 +7,7 @@ * Based off i8xx_tco.c: * (c) Copyright 2000 kernel concepts , All Rights * Reserved. - * http://www.kernelconcepts.de + * https://www.kernelconcepts.de * * TCO timer driver for NV chipsets * based on softdog.c by Alan Cox diff --git a/drivers/watchdog/nv_tco.h b/drivers/watchdog/nv_tco.h index d325e528010f..c65f82588386 100644 --- a/drivers/watchdog/nv_tco.h +++ b/drivers/watchdog/nv_tco.h @@ -9,7 +9,7 @@ * * (c) Copyright 2000 kernel concepts , All Rights * Reserved. - * http://www.kernelconcepts.de + * https://www.kernelconcepts.de * * Neither kernel concepts nor Nils Faerber admit liability nor provide * warranty for any of this software. This material is provided diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c index 93bd302ae7c5..85e9664318c9 100644 --- a/drivers/watchdog/sp5100_tco.c +++ b/drivers/watchdog/sp5100_tco.c @@ -7,7 +7,7 @@ * Based on i8xx_tco.c: * (c) Copyright 2000 kernel concepts , All Rights * Reserved. - * http://www.kernelconcepts.de + * https://www.kernelconcepts.de * * See AMD Publication 43009 "AMD SB700/710/750 Register Reference Guide", * AMD Publication 45482 "AMD SB800-Series Southbridges Register -- cgit v1.2.3 From cef9572e9af373cefd1adc9e771e89670da5da3c Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 17 Jul 2020 16:29:56 +0300 Subject: watchdog: add support for adjusting last known HW keepalive time Certain watchdogs require the watchdog only to be pinged within a specific time window, pinging too early or too late cause the watchdog to fire. In cases where this sort of watchdog has been started before kernel comes up, we must adjust the watchdog keepalive window to match the actually running timer, so add a new driver API for this purpose. Signed-off-by: Tero Kristo Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20200717132958.14304-3-t-kristo@ti.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- Documentation/watchdog/watchdog-kernel-api.rst | 12 +++++++++++ drivers/watchdog/watchdog_dev.c | 30 ++++++++++++++++++++++++++ include/linux/watchdog.h | 2 ++ 3 files changed, 44 insertions(+) (limited to 'Documentation') diff --git a/Documentation/watchdog/watchdog-kernel-api.rst b/Documentation/watchdog/watchdog-kernel-api.rst index 068a55ee0d4a..baf44e986b07 100644 --- a/Documentation/watchdog/watchdog-kernel-api.rst +++ b/Documentation/watchdog/watchdog-kernel-api.rst @@ -336,3 +336,15 @@ an action is taken by a preconfigured pretimeout governor preassigned to the watchdog device. If watchdog pretimeout governor framework is not enabled, watchdog_notify_pretimeout() prints a notification message to the kernel log buffer. + +To set the last known HW keepalive time for a watchdog, the following function +should be used:: + + int watchdog_set_last_hw_keepalive(struct watchdog_device *wdd, + unsigned int last_ping_ms) + +This function must be called immediately after watchdog registration. It +sets the last known hardware heartbeat to have happened last_ping_ms before +current time. Calling this is only needed if the watchdog is already running +when probe is called, and the watchdog can only be pinged after the +min_hw_heartbeat_ms time has passed from the last ping. diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c index 0ad1c393c00e..531e74994b61 100644 --- a/drivers/watchdog/watchdog_dev.c +++ b/drivers/watchdog/watchdog_dev.c @@ -1138,6 +1138,36 @@ void watchdog_dev_unregister(struct watchdog_device *wdd) watchdog_cdev_unregister(wdd); } +/* + * watchdog_set_last_hw_keepalive: set last HW keepalive time for watchdog + * @wdd: watchdog device + * @last_ping_ms: time since last HW heartbeat + * + * Adjusts the last known HW keepalive time for a watchdog timer. + * This is needed if the watchdog is already running when the probe + * function is called, and it can't be pinged immediately. This + * function must be called immediately after watchdog registration, + * and min_hw_heartbeat_ms must be set for this to be useful. + */ +int watchdog_set_last_hw_keepalive(struct watchdog_device *wdd, + unsigned int last_ping_ms) +{ + struct watchdog_core_data *wd_data; + ktime_t now; + + if (!wdd) + return -EINVAL; + + wd_data = wdd->wd_data; + + now = ktime_get(); + + wd_data->last_hw_keepalive = ktime_sub(now, ms_to_ktime(last_ping_ms)); + + return __watchdog_ping(wdd); +} +EXPORT_SYMBOL_GPL(watchdog_set_last_hw_keepalive); + /* * watchdog_dev_init: init dev part of watchdog core * diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h index 1464ce6ffa31..9b19e6bb68b5 100644 --- a/include/linux/watchdog.h +++ b/include/linux/watchdog.h @@ -210,6 +210,8 @@ extern int watchdog_init_timeout(struct watchdog_device *wdd, extern int watchdog_register_device(struct watchdog_device *); extern void watchdog_unregister_device(struct watchdog_device *); +int watchdog_set_last_hw_keepalive(struct watchdog_device *, unsigned int); + /* devres register variant */ int devm_watchdog_register_device(struct device *dev, struct watchdog_device *); -- cgit v1.2.3