From 92059da65d84227fcc7cabbd96c0cca19880f4ff Mon Sep 17 00:00:00 2001 From: Bagas Sanjaya Date: Wed, 10 May 2023 10:54:14 +0700 Subject: Documentation: net/mlx5: Add blank line separator before numbered lists The doc forgets to add separator before numbered lists, which causes the lists to be appended to previous paragraph inline instead. Add the missing separator. Fixes: f2d51e579359b7 ("net/mlx5: Separate mlx5 driver documentation into multiple pages") Reviewed-by: Leon Romanovsky Signed-off-by: Bagas Sanjaya Reviewed-by: Simon Horman Signed-off-by: Saeed Mahameed --- .../networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst index 00687425d8b7..f962c0975d84 100644 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst +++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst @@ -40,6 +40,7 @@ flow_steering_mode: Device flow steering mode --------------------------------------------- The flow steering mode parameter controls the flow steering mode of the driver. Two modes are supported: + 1. 'dmfs' - Device managed flow steering. 2. 'smfs' - Software/Driver managed flow steering. @@ -99,6 +100,7 @@ between representors and stacked devices. By default metadata is enabled on the supported devices in E-switch. Metadata is applicable only for E-switch in switchdev mode and users may disable it when NONE of the below use cases will be in use: + 1. HCA is in Dual/multi-port RoCE mode. 2. VF/SF representor bonding (Usually used for Live migration) 3. Stacked devices -- cgit v1.2.3