From 056b5033fb8d16095fb074fc910fad90186374f3 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 9 May 2005 14:52:00 -0700 Subject: [PATCH] update sn2 maintainer Now that I'm no longer at SGI and don't have access to Altix equipment, it's time to pass on the job of patch monkey to someone else. Greg Edwards has foolishly^Wkindly volunteered for the job, so here's a patch to update the MAINTAINERS file with the appropriate information. Signed-off-by: Jesse Barnes Signed-off-by: Tony Luck --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'MAINTAINERS') diff --git a/MAINTAINERS b/MAINTAINERS index 5b8483334de1..97bc927d2c55 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1023,8 +1023,8 @@ W: http://www.ia64-linux.org/ S: Maintained SN-IA64 (Itanium) SUB-PLATFORM -P: Jesse Barnes -M: jbarnes@sgi.com +P: Greg Edwards +M: edwardsg@sgi.com L: linux-altix@sgi.com L: linux-ia64@vger.kernel.org W: http://www.sgi.com/altix -- cgit v1.2.3 From 4a4e5787e0b721021fe0a456ddc987a04cebfc8d Mon Sep 17 00:00:00 2001 From: "R.Marek@sh.cvut.cz" Date: Thu, 21 Apr 2005 09:07:56 +0000 Subject: [PATCH] I2C: ALI1563 SMBus driver fix This patch fixes "grave" bugs in i2c-ali1563 driver. It seems on recent chipset revisions the HSTS_DONE is set only for block transfers, so we must detect the end of ordinary transaction other way. Also due to missing and mask, setting other transfer modes was not possible. Moreover the continous byte mode transfer uses DAT0 for command rather than CMD command. All those changes were tested with help of Chunhao Huang from Winbond. I'm willing to maintain the driver. Second patch adds me as maintainer if this is neccessary. Signed-Off-By: Rudolf Marek Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 6 ++++++ drivers/i2c/busses/i2c-ali1563.c | 46 +++++++++++++++++++++++++++------------- 2 files changed, 37 insertions(+), 15 deletions(-) (limited to 'MAINTAINERS') diff --git a/MAINTAINERS b/MAINTAINERS index 97bc927d2c55..65ad8251e4bc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -239,6 +239,12 @@ L: linux-usb-devel@lists.sourceforge.net W: http://www.linux-usb.org/SpeedTouch/ S: Maintained +ALI1563 I2C DRIVER +P: Rudolf Marek +M: r.marek@sh.cvut.cz +L: sensors@stimpy.netroedge.com +S: Maintained + ALPHA PORT P: Richard Henderson M: rth@twiddle.net diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 35710818fe47..fdd881aee618 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -2,6 +2,7 @@ * i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge * * Copyright (C) 2004 Patrick Mochel + * 2005 Rudolf Marek * * The 1563 southbridge is deceptively similar to the 1533, with a * few notable exceptions. One of those happens to be the fact they @@ -57,10 +58,11 @@ #define HST_CNTL2_BLOCK 0x05 +#define HST_CNTL2_SIZEMASK 0x38 static unsigned short ali1563_smba; -static int ali1563_transaction(struct i2c_adapter * a) +static int ali1563_transaction(struct i2c_adapter * a, int size) { u32 data; int timeout; @@ -73,7 +75,7 @@ static int ali1563_transaction(struct i2c_adapter * a) data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) { - dev_warn(&a->dev,"ali1563: Trying to reset busy device\n"); + dev_err(&a->dev, "ali1563: Trying to reset busy device\n"); outb_p(data | HST_STS_BAD,SMB_HST_STS); data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) @@ -94,19 +96,31 @@ static int ali1563_transaction(struct i2c_adapter * a) if (timeout && !(data & HST_STS_BAD)) return 0; - dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n", - timeout ? "Timeout " : "", - data & HST_STS_FAIL ? "Transaction Failed " : "", - data & HST_STS_BUSERR ? "No response or Bus Collision " : "", - data & HST_STS_DEVERR ? "Device Error " : "", - !(data & HST_STS_DONE) ? "Transaction Never Finished " : ""); - if (!(data & HST_STS_DONE)) + if (!timeout) { + dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n"); /* Issue 'kill' to host controller */ outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2); - else - /* Issue timeout to reset all devices on bus */ + data = inb_p(SMB_HST_STS); + } + + /* device error - no response, ignore the autodetection case */ + if ((data & HST_STS_DEVERR) && (size != HST_CNTL2_QUICK)) { + dev_err(&a->dev, "Device error!\n"); + } + + /* bus collision */ + if (data & HST_STS_BUSERR) { + dev_err(&a->dev, "Bus collision!\n"); + /* Issue timeout, hoping it helps */ outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1); + } + + if (data & HST_STS_FAIL) { + dev_err(&a->dev, "Cleaning fail after KILL!\n"); + outb_p(0x0,SMB_HST_CNTL2); + } + return -1; } @@ -149,7 +163,7 @@ static int ali1563_block_start(struct i2c_adapter * a) if (timeout && !(data & HST_STS_BAD)) return 0; - dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n", + dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n", timeout ? "Timeout " : "", data & HST_STS_FAIL ? "Transaction Failed " : "", data & HST_STS_BUSERR ? "No response or Bus Collision " : "", @@ -242,13 +256,15 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, } outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD); - outb_p(inb_p(SMB_HST_CNTL2) | (size << 3), SMB_HST_CNTL2); + outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | (size << 3), SMB_HST_CNTL2); /* Write the command register */ + switch(size) { case HST_CNTL2_BYTE: if (rw== I2C_SMBUS_WRITE) - outb_p(cmd, SMB_HST_CMD); + /* Beware it uses DAT0 register and not CMD! */ + outb_p(cmd, SMB_HST_DAT0); break; case HST_CNTL2_BYTE_DATA: outb_p(cmd, SMB_HST_CMD); @@ -268,7 +284,7 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, goto Done; } - if ((error = ali1563_transaction(a))) + if ((error = ali1563_transaction(a, size))) goto Done; if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK)) -- cgit v1.2.3 From 979b6c135fc4d466a39d8e3ec05583e5ee30261a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 13 Jun 2005 14:30:40 -0700 Subject: [NET]: Move the netdev list to vger.kernel.org. From: Ralf Baechle There are archives of the old list at http://oss.sgi.com/archives/netdev Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- Documentation/networking/vortex.txt | 2 +- MAINTAINERS | 48 ++++++++++++++++++------------------- drivers/net/r8169.c | 2 +- net/sched/act_api.c | 2 +- 4 files changed, 27 insertions(+), 27 deletions(-) (limited to 'MAINTAINERS') diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt index fa12a9e4abdd..80e1cb19609f 100644 --- a/Documentation/networking/vortex.txt +++ b/Documentation/networking/vortex.txt @@ -12,7 +12,7 @@ Don is no longer the prime maintainer of this version of the driver. Please report problems to one or more of: Andrew Morton - Netdev mailing list + Netdev mailing list Linux kernel mailing list Please note the 'Reporting and Diagnosing Problems' section at the end diff --git a/MAINTAINERS b/MAINTAINERS index 65ad8251e4bc..86ba94f16e83 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -73,7 +73,7 @@ S: Status, one of the following: 3C359 NETWORK DRIVER P: Mike Phillips M: mikep@linuxtr.net -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained @@ -81,13 +81,13 @@ S: Maintained 3C505 NETWORK DRIVER P: Philip Blundell M: philb@gnu.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained 3CR990 NETWORK DRIVER P: David Dillow M: dave@thedillows.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained 3W-XXXX ATA-RAID CONTROLLER DRIVER @@ -130,7 +130,7 @@ S: Maintained 8169 10/100/1000 GIGABIT ETHERNET DRIVER P: Francois Romieu M: romieu@fr.zoreil.com -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER @@ -143,7 +143,7 @@ S: Maintained 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.] P: Paul Gortmaker M: p_gortmaker@yahoo.com -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained A2232 SERIAL BOARD DRIVER @@ -332,7 +332,7 @@ S: Maintained ARPD SUPPORT P: Jonathan Layes -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained ASUS ACPI EXTRAS DRIVER @@ -706,7 +706,7 @@ S: Orphaned DIGI RIGHTSWITCH NETWORK DRIVER P: Rick Richardson -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org W: http://www.digi.com S: Orphaned @@ -812,7 +812,7 @@ S: Maintained ETHEREXPRESS-16 NETWORK DRIVER P: Philip Blundell M: philb@gnu.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained ETHERNET BRIDGE @@ -875,7 +875,7 @@ S: Maintained FRAME RELAY DLCI/FRAD (Sangoma drivers too) P: Mike McLagan M: mike.mclagan@linux.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained FREEVXFS FILESYSTEM @@ -1215,7 +1215,7 @@ S: Maintained IPX NETWORK LAYER P: Arnaldo Carvalho de Melo M: acme@conectiva.com.br -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained IRDA SUBSYSTEM @@ -1482,7 +1482,7 @@ MARVELL MV64340 ETHERNET DRIVER P: Manish Lachwani M: Manish_Lachwani@pmc-sierra.com L: linux-mips@linux-mips.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Supported MATROX FRAMEBUFFER DRIVER @@ -1592,13 +1592,13 @@ P: Andrew Morton M: akpm@osdl.org P: Jeff Garzik M: jgarzik@pobox.com -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained NETWORKING [GENERAL] P: Networking Team -M: netdev@oss.sgi.com -L: netdev@oss.sgi.com +M: netdev@vger.kernel.org +L: netdev@vger.kernel.org S: Maintained NETWORKING [IPv4/IPv6] @@ -1614,7 +1614,7 @@ P: Hideaki YOSHIFUJI M: yoshfuji@linux-ipv6.org P: Patrick McHardy M: kaber@coreworks.de -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained IPVS @@ -1634,7 +1634,7 @@ NI5010 NETWORK DRIVER P: Jan-Pascal van Best and Andreas Mohr M: Jan-Pascal van Best M: Andreas Mohr <100.30936@germany.net> -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER @@ -1676,7 +1676,7 @@ P: Peter De Shrijver M: p2@ace.ulyssis.student.kuleuven.ac.be P: Mike Phillips M: mikep@linuxtr.net -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained @@ -1783,7 +1783,7 @@ S: Unmaintained PCNET32 NETWORK DRIVER P: Thomas Bogendörfer M: tsbogend@alpha.franken.de -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained PHRAM MTD DRIVER @@ -1795,7 +1795,7 @@ S: Maintained POSIX CLOCKS and TIMERS P: George Anzinger M: george@mvista.com -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Supported PNP SUPPORT @@ -1830,7 +1830,7 @@ S: Supported PRISM54 WIRELESS DRIVER P: Prism54 Development Team M: prism54-private@prism54.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org W: http://prism54.org S: Maintained @@ -2047,7 +2047,7 @@ SIS 900/7016 FAST ETHERNET DRIVER P: Daniele Venzano M: venza@brownhat.org W: http://www.brownhat.org/sis900.html -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained SIS FRAMEBUFFER DRIVER @@ -2106,7 +2106,7 @@ S: Maintained SONIC NETWORK DRIVER P: Thomas Bogendoerfer M: tsbogend@alpha.franken.de -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained SONY VAIO CONTROL DEVICE DRIVER @@ -2163,7 +2163,7 @@ S: Supported SPX NETWORK LAYER P: Jay Schulist M: jschlst@samba.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Supported SRM (Alpha) environment access @@ -2242,7 +2242,7 @@ S: Maintained TOKEN-RING NETWORK DRIVER P: Mike Phillips M: mikep@linuxtr.net -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index b3768d844747..d6d0e43dab65 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -415,7 +415,7 @@ struct rtl8169_private { struct work_struct task; }; -MODULE_AUTHOR("Realtek and the Linux r8169 crew "); +MODULE_AUTHOR("Realtek and the Linux r8169 crew "); MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver"); module_param_array(media, int, &num_media, 0); module_param(rx_copybreak, int, 0); diff --git a/net/sched/act_api.c b/net/sched/act_api.c index cafcb084098d..914c85ff8fe6 100644 --- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -881,7 +881,7 @@ static int __init tc_action_init(void) link_p[RTM_GETACTION-RTM_BASE].dumpit = tc_dump_action; } - printk("TC classifier action (bugs to netdev@oss.sgi.com cc " + printk("TC classifier action (bugs to netdev@vger.kernel.org cc " "hadi@cyberus.ca)\n"); return 0; } -- cgit v1.2.3 From ba483d574b43b05fa4c78550b874c7e24424ff2a Mon Sep 17 00:00:00 2001 From: Martin Waitz Date: Fri, 17 Jun 2005 13:20:59 -0700 Subject: [PATCH] DocBook: MAINTAINER entry Martin can maintain the DocBook system for us. Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'MAINTAINERS') diff --git a/MAINTAINERS b/MAINTAINERS index 86ba94f16e83..e3f0f3f157c9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -736,6 +736,11 @@ M: tori@unhappy.mine.nu L: linux-kernel@vger.kernel.org S: Maintained +DOCBOOK FOR DOCUMENTATION +P: Martin Waitz +M: tali@admingilde.org +S: Maintained + DOUBLETALK DRIVER P: James R. Van Zandt M: jrv@vanzandt.mv.com -- cgit v1.2.3 From 1154ea7dcd8eed758fb5ec47393a79d5a1f0bc43 Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Tue, 21 Jun 2005 17:17:04 -0700 Subject: [PATCH] Framebuffer driver for Arc LCD board Add support for the Arc monochrome LCD board. The board uses KS108 controllers to drive individual 64x64 LCD matrices. The board can be paneled in a variety of setups such as 2x1=128x64, 4x4=256x256 and so on. The board/host interface is through GPIO. Signed-off-by: Jaya Kumar Cc: "Antonino A. Daplas" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- CREDITS | 7 + MAINTAINERS | 5 + drivers/video/Kconfig | 16 ++ drivers/video/Makefile | 1 + drivers/video/arcfb.c | 684 +++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/arcfb.h | 8 + 6 files changed, 721 insertions(+) create mode 100644 drivers/video/arcfb.c create mode 100644 include/linux/arcfb.h (limited to 'MAINTAINERS') diff --git a/CREDITS b/CREDITS index d65ffe5a4d08..2993348ce6ce 100644 --- a/CREDITS +++ b/CREDITS @@ -1880,6 +1880,13 @@ S: Schlehenweg 9 S: D-91080 Uttenreuth S: Germany +N: Jaya Kumar +E: jayalk@intworks.biz +W: http://www.intworks.biz +D: Arc monochrome LCD framebuffer driver, x86 reboot fixups +S: Gurgaon, India +S: Kuala Lumpur, Malaysia + N: Gabor Kuti M: seasons@falcon.sch.bme.hu M: seasons@makosteszta.sote.hu diff --git a/MAINTAINERS b/MAINTAINERS index e3f0f3f157c9..0f88a70a15d8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -265,6 +265,11 @@ P: Arnaldo Carvalho de Melo M: acme@conectiva.com.br S: Maintained +ARC FRAMEBUFFER DRIVER +P: Jaya Kumar +M: jayalk@intworks.biz +S: Maintained + ARM26 ARCHITECTURE P: Ian Molton M: spyro@f2s.com diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 6be8fbec0a0e..04d3120f7236 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -322,6 +322,22 @@ config FB_FM2 This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). +config FB_ARC + tristate "Arc Monochrome LCD board support" + depends on FB && X86 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR + help + This enables support for the Arc Monochrome LCD board. The board + is based on the KS-108 lcd controller and is typically a matrix + of 2*n chips. This driver was tested with a 128x64 panel. This + driver supports it for use with x86 SBCs through a 16 bit GPIO + interface (8 bit data, 8 bit control). If you anticpate using + this driver, say Y or M; otherwise say N. You must specify the + GPIO IO address to be used for setting control and data. + config FB_ATARI bool "Atari native chipset support" depends on (FB = y) && ATARI && BROKEN diff --git a/drivers/video/Makefile b/drivers/video/Makefile index bd8dc0ffe723..b018df4e95c8 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_FB_MACMODES) += macmodes.o # Hardware specific drivers go first obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o +obj-$(CONFIG_FB_ARC) += arcfb.o obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o obj-$(CONFIG_FB_CYBER) += cyberfb.o obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c new file mode 100644 index 000000000000..d28457e0c063 --- /dev/null +++ b/drivers/video/arcfb.c @@ -0,0 +1,684 @@ +/* + * linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board + * + * Copyright (C) 2005, Jaya Kumar + * http://www.intworks.biz/arclcd + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. + * + * This driver was written to be used with the Arc LCD board. Arc uses a + * set of KS108 chips that control individual 64x64 LCD matrices. The board + * can be paneled in a variety of setups such as 2x1=128x64, 4x4=256x256 and + * so on. The interface between the board and the host is TTL based GPIO. The + * GPIO requirements are 8 writable data lines and 4+n lines for control. On a + * GPIO-less system, the board can be tested by connecting the respective sigs + * up to a parallel port connector. The driver requires the IO addresses for + * data and control GPIO at load time. It is unable to probe for the + * existence of the LCD so it must be told at load time whether it should + * be enabled or not. + * + * Todo: + * - testing with 4x4 + * - testing with interrupt hw + * + * General notes: + * - User must set tuhold. It's in microseconds. According to the 108 spec, + * the hold time is supposed to be at least 1 microsecond. + * - User must set num_cols=x num_rows=y, eg: x=2 means 128 + * - User must set arcfb_enable=1 to enable it + * - User must set dio_addr=0xIOADDR cio_addr=0xIOADDR + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define floor8(a) (a&(~0x07)) +#define floorXres(a,xres) (a&(~(xres - 1))) +#define iceil8(a) (((int)((a+7)/8))*8) +#define ceil64(a) (a|0x3F) +#define ceilXres(a,xres) (a|(xres - 1)) + +/* ks108 chipset specific defines and code */ + +#define KS_SET_DPY_START_LINE 0xC0 +#define KS_SET_PAGE_NUM 0xB8 +#define KS_SET_X 0x40 +#define KS_CEHI 0x01 +#define KS_CELO 0x00 +#define KS_SEL_CMD 0x08 +#define KS_SEL_DATA 0x00 +#define KS_DPY_ON 0x3F +#define KS_DPY_OFF 0x3E +#define KS_INTACK 0x40 +#define KS_CLRINT 0x02 + +struct arcfb_par { + unsigned long dio_addr; + unsigned long cio_addr; + unsigned long c2io_addr; + atomic_t ref_count; + unsigned char cslut[9]; + struct fb_info *info; + unsigned int irq; + spinlock_t lock; +}; + +static struct fb_fix_screeninfo arcfb_fix __initdata = { + .id = "arcfb", + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_MONO01, + .xpanstep = 0, + .ypanstep = 1, + .ywrapstep = 0, + .accel = FB_ACCEL_NONE, +}; + +static struct fb_var_screeninfo arcfb_var __initdata = { + .xres = 128, + .yres = 64, + .xres_virtual = 128, + .yres_virtual = 64, + .bits_per_pixel = 1, + .nonstd = 1, +}; + +static unsigned long num_cols; +static unsigned long num_rows; +static unsigned long dio_addr; +static unsigned long cio_addr; +static unsigned long c2io_addr; +static unsigned long splashval; +static unsigned long tuhold; +static unsigned int nosplash; +static unsigned int arcfb_enable; +static unsigned int irq; + +static DECLARE_WAIT_QUEUE_HEAD(arcfb_waitq); + +static void ks108_writeb_ctl(struct arcfb_par *par, + unsigned int chipindex, unsigned char value) +{ + unsigned char chipselval = par->cslut[chipindex]; + + outb(chipselval|KS_CEHI|KS_SEL_CMD, par->cio_addr); + outb(value, par->dio_addr); + udelay(tuhold); + outb(chipselval|KS_CELO|KS_SEL_CMD, par->cio_addr); +} + +static void ks108_writeb_mainctl(struct arcfb_par *par, unsigned char value) +{ + + outb(value, par->cio_addr); + udelay(tuhold); +} + +static unsigned char ks108_readb_ctl2(struct arcfb_par *par) +{ + return inb(par->c2io_addr); +} + +static void ks108_writeb_data(struct arcfb_par *par, + unsigned int chipindex, unsigned char value) +{ + unsigned char chipselval = par->cslut[chipindex]; + + outb(chipselval|KS_CEHI|KS_SEL_DATA, par->cio_addr); + outb(value, par->dio_addr); + udelay(tuhold); + outb(chipselval|KS_CELO|KS_SEL_DATA, par->cio_addr); +} + +static void ks108_set_start_line(struct arcfb_par *par, + unsigned int chipindex, unsigned char y) +{ + ks108_writeb_ctl(par, chipindex, KS_SET_DPY_START_LINE|y); +} + +static void ks108_set_yaddr(struct arcfb_par *par, + unsigned int chipindex, unsigned char y) +{ + ks108_writeb_ctl(par, chipindex, KS_SET_PAGE_NUM|y); +} + +static void ks108_set_xaddr(struct arcfb_par *par, + unsigned int chipindex, unsigned char x) +{ + ks108_writeb_ctl(par, chipindex, KS_SET_X|x); +} + +static void ks108_clear_lcd(struct arcfb_par *par, unsigned int chipindex) +{ + int i,j; + + for (i = 0; i <= 8; i++) { + ks108_set_yaddr(par, chipindex, i); + ks108_set_xaddr(par, chipindex, 0); + for (j = 0; j < 64; j++) { + ks108_writeb_data(par, chipindex, + (unsigned char) splashval); + } + } +} + +/* main arcfb functions */ + +static int arcfb_open(struct fb_info *info, int user) +{ + struct arcfb_par *par = info->par; + + atomic_inc(&par->ref_count); + return 0; +} + +static int arcfb_release(struct fb_info *info, int user) +{ + struct arcfb_par *par = info->par; + int count = atomic_read(&par->ref_count); + + if (!count) + return -EINVAL; + atomic_dec(&par->ref_count); + return 0; +} + +static int arcfb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + int i; + struct arcfb_par *par = info->par; + + if ((var->vmode & FB_VMODE_YWRAP) && (var->yoffset < 64) + && (info->var.yres <= 64)) { + for (i = 0; i < num_cols; i++) { + ks108_set_start_line(par, i, var->yoffset); + } + info->var.yoffset = var->yoffset; + return 0; + } + + return -EINVAL; +} + +static irqreturn_t arcfb_interrupt(int vec, void *dev_instance, + struct pt_regs *regs) +{ + struct fb_info *info = dev_instance; + unsigned char ctl2status; + struct arcfb_par *par = info->par; + + ctl2status = ks108_readb_ctl2(par); + + if (!(ctl2status & KS_INTACK)) /* not arc generated interrupt */ + return IRQ_NONE; + + ks108_writeb_mainctl(par, KS_CLRINT); + + spin_lock(&par->lock); + if (waitqueue_active(&arcfb_waitq)) { + wake_up(&arcfb_waitq); + } + spin_unlock(&par->lock); + + return IRQ_HANDLED; +} + +/* + * here we handle a specific page on the lcd. the complexity comes from + * the fact that the fb is laidout in 8xX vertical columns. we extract + * each write of 8 vertical pixels. then we shift out as we move along + * X. That's what rightshift does. bitmask selects the desired input bit. + */ +static void arcfb_lcd_update_page(struct arcfb_par *par, unsigned int upper, + unsigned int left, unsigned int right, unsigned int distance) +{ + unsigned char *src; + unsigned int xindex, yindex, chipindex, linesize; + int i, count; + unsigned char val; + unsigned char bitmask, rightshift; + + xindex = left >> 6; + yindex = upper >> 6; + chipindex = (xindex + (yindex*num_cols)); + + ks108_set_yaddr(par, chipindex, upper/8); + + linesize = par->info->var.xres/8; + src = par->info->screen_base + (left/8) + (upper * linesize); + ks108_set_xaddr(par, chipindex, left); + + bitmask=1; + rightshift=0; + while (left <= right) { + val = 0; + for (i = 0; i < 8; i++) { + if ( i > rightshift) { + val |= (*(src + (i*linesize)) & bitmask) + << (i - rightshift); + } else { + val |= (*(src + (i*linesize)) & bitmask) + >> (rightshift - i); + } + } + ks108_writeb_data(par, chipindex, val); + left++; + count++; + if (bitmask == 0x80) { + bitmask = 1; + src++; + rightshift=0; + } else { + bitmask <<= 1; + rightshift++; + } + } +} + +/* + * here we handle the entire vertical page of the update. we write across + * lcd chips. update_page uses the upper/left values to decide which + * chip to select for the right. upper is needed for setting the page + * desired for the write. + */ +static void arcfb_lcd_update_vert(struct arcfb_par *par, unsigned int top, + unsigned int bottom, unsigned int left, unsigned int right) +{ + unsigned int distance, upper, lower; + + distance = (bottom - top) + 1; + upper = top; + lower = top + 7; + + while (distance > 0) { + distance -= 8; + arcfb_lcd_update_page(par, upper, left, right, 8); + upper = lower + 1; + lower = upper + 7; + } +} + +/* + * here we handle horizontal blocks for the update. update_vert will + * handle spaning multiple pages. we break out each horizontal + * block in to individual blocks no taller than 64 pixels. + */ +static void arcfb_lcd_update_horiz(struct arcfb_par *par, unsigned int left, + unsigned int right, unsigned int top, unsigned int h) +{ + unsigned int distance, upper, lower; + + distance = h; + upper = floor8(top); + lower = min(upper + distance - 1, ceil64(upper)); + + while (distance > 0) { + distance -= ((lower - upper) + 1 ); + arcfb_lcd_update_vert(par, upper, lower, left, right); + upper = lower + 1; + lower = min(upper + distance - 1, ceil64(upper)); + } +} + +/* + * here we start the process of spliting out the fb update into + * individual blocks of pixels. we end up spliting into 64x64 blocks + * and finally down to 64x8 pages. + */ +static void arcfb_lcd_update(struct arcfb_par *par, unsigned int dx, + unsigned int dy, unsigned int w, unsigned int h) +{ + unsigned int left, right, distance, y; + + /* align the request first */ + y = floor8(dy); + h += dy - y; + h = iceil8(h); + + distance = w; + left = dx; + right = min(left + w - 1, ceil64(left)); + + while (distance > 0) { + arcfb_lcd_update_horiz(par, left, right, y, h); + distance -= ((right - left) + 1); + left = right + 1; + right = min(left + distance - 1, ceil64(left)); + } +} + +void arcfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) +{ + struct arcfb_par *par = info->par; + + cfb_fillrect(info, rect); + + /* update the physical lcd */ + arcfb_lcd_update(par, rect->dx, rect->dy, rect->width, rect->height); +} + +void arcfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) +{ + struct arcfb_par *par = info->par; + + cfb_copyarea(info, area); + + /* update the physical lcd */ + arcfb_lcd_update(par, area->dx, area->dy, area->width, area->height); +} + +void arcfb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + struct arcfb_par *par = info->par; + + cfb_imageblit(info, image); + + /* update the physical lcd */ + arcfb_lcd_update(par, image->dx, image->dy, image->width, + image->height); +} + +static int arcfb_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg, + struct fb_info *info) +{ + void __user *argp = (void __user *)arg; + struct arcfb_par *par = info->par; + unsigned long flags; + + switch (cmd) { + case FBIO_WAITEVENT: + { + DEFINE_WAIT(wait); + /* illegal to wait on arc if no irq will occur */ + if (!par->irq) + return -EINVAL; + + /* wait until the Arc has generated an interrupt + * which will wake us up */ + spin_lock_irqsave(&par->lock, flags); + prepare_to_wait(&arcfb_waitq, &wait, + TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&par->lock, flags); + schedule(); + finish_wait(&arcfb_waitq, &wait); + } + case FBIO_GETCONTROL2: + { + unsigned char ctl2; + + ctl2 = ks108_readb_ctl2(info->par); + if (copy_to_user(argp, &ctl2, sizeof(ctl2))) + return -EFAULT; + return 0; + } + default: + return -EINVAL; + } +} + +/* + * this is the access path from userspace. they can seek and write to + * the fb. it's inefficient for them to do anything less than 64*8 + * writes since we update the lcd in each write() anyway. + */ +static ssize_t arcfb_write(struct file *file, const char *buf, size_t count, + loff_t *ppos) +{ + /* modded from epson 1355 */ + + struct inode *inode; + int fbidx; + struct fb_info *info; + unsigned long p; + int err=-EINVAL; + unsigned int fbmemlength,x,y,w,h, bitppos, startpos, endpos, bitcount; + struct arcfb_par *par; + unsigned int xres; + + p = *ppos; + inode = file->f_dentry->d_inode; + fbidx = iminor(inode); + info = registered_fb[fbidx]; + par = info->par; + + if (!info || !info->screen_base) + return -ENODEV; + + xres = info->var.xres; + fbmemlength = (xres * info->var.yres)/8; + + if (p > fbmemlength) + return -ENOSPC; + + err = 0; + if ((count + p) > fbmemlength) { + count = fbmemlength - p; + err = -ENOSPC; + } + + if (count) { + char *base_addr; + + base_addr = info->screen_base; + count -= copy_from_user(base_addr + p, buf, count); + *ppos += count; + err = -EFAULT; + } + + + bitppos = p*8; + startpos = floorXres(bitppos, xres); + endpos = ceilXres((bitppos + (count*8)), xres); + bitcount = endpos - startpos; + + x = startpos % xres; + y = startpos / xres; + w = xres; + h = bitcount / xres; + arcfb_lcd_update(par, x, y, w, h); + + if (count) + return count; + return err; +} + +static void arcfb_platform_release(struct device *device) +{ +} + +static struct fb_ops arcfb_ops = { + .owner = THIS_MODULE, + .fb_open = arcfb_open, + .fb_write = arcfb_write, + .fb_release = arcfb_release, + .fb_pan_display = arcfb_pan_display, + .fb_fillrect = arcfb_fillrect, + .fb_copyarea = arcfb_copyarea, + .fb_imageblit = arcfb_imageblit, + .fb_cursor = soft_cursor, + .fb_ioctl = arcfb_ioctl, +}; + +static int __init arcfb_probe(struct device *device) +{ + struct platform_device *dev = to_platform_device(device); + struct fb_info *info; + int retval = -ENOMEM; + int videomemorysize; + unsigned char *videomemory; + struct arcfb_par *par; + int i; + + videomemorysize = (((64*64)*num_cols)*num_rows)/8; + + /* We need a flat backing store for the Arc's + less-flat actual paged framebuffer */ + if (!(videomemory = vmalloc(videomemorysize))) + return retval; + + memset(videomemory, 0, videomemorysize); + + info = framebuffer_alloc(sizeof(struct arcfb_par), &dev->dev); + if (!info) + goto err; + + info->screen_base = (char __iomem *)videomemory; + info->fbops = &arcfb_ops; + + info->var = arcfb_var; + info->fix = arcfb_fix; + par = info->par; + par->info = info; + + if (!dio_addr || !cio_addr || !c2io_addr) { + printk(KERN_WARNING "no IO addresses supplied\n"); + goto err1; + } + par->dio_addr = dio_addr; + par->cio_addr = cio_addr; + par->c2io_addr = c2io_addr; + par->cslut[0] = 0x00; + par->cslut[1] = 0x06; + info->flags = FBINFO_FLAG_DEFAULT; + spin_lock_init(&par->lock); + retval = register_framebuffer(info); + if (retval < 0) + goto err1; + dev_set_drvdata(&dev->dev, info); + if (irq) { + par->irq = irq; + if (request_irq(par->irq, &arcfb_interrupt, SA_SHIRQ, + "arcfb", info)) { + printk(KERN_INFO + "arcfb: Failed req IRQ %d\n", par->irq); + goto err1; + } + } + printk(KERN_INFO + "fb%d: Arc frame buffer device, using %dK of video memory\n", + info->node, videomemorysize >> 10); + + /* this inits the lcd but doesn't clear dirty pixels */ + for (i = 0; i < num_cols * num_rows; i++) { + ks108_writeb_ctl(par, i, KS_DPY_OFF); + ks108_set_start_line(par, i, 0); + ks108_set_yaddr(par, i, 0); + ks108_set_xaddr(par, i, 0); + ks108_writeb_ctl(par, i, KS_DPY_ON); + } + + /* if we were told to splash the screen, we just clear it */ + if (!nosplash) { + for (i = 0; i < num_cols * num_rows; i++) { + printk(KERN_INFO "fb%d: splashing lcd %d\n", + info->node, i); + ks108_set_start_line(par, i, 0); + ks108_clear_lcd(par, i); + } + } + + return 0; +err1: + framebuffer_release(info); +err: + vfree(videomemory); + return retval; +} + +static int arcfb_remove(struct device *device) +{ + struct fb_info *info = dev_get_drvdata(device); + + if (info) { + unregister_framebuffer(info); + vfree(info->screen_base); + framebuffer_release(info); + } + return 0; +} + +static struct device_driver arcfb_driver = { + .name = "arcfb", + .bus = &platform_bus_type, + .probe = arcfb_probe, + .remove = arcfb_remove, +}; + +static struct platform_device arcfb_device = { + .name = "arcfb", + .id = 0, + .dev = { + .release = arcfb_platform_release, + } +}; + +static int __init arcfb_init(void) +{ + int ret; + + if (!arcfb_enable) + return -ENXIO; + + ret = driver_register(&arcfb_driver); + if (!ret) { + ret = platform_device_register(&arcfb_device); + if (ret) + driver_unregister(&arcfb_driver); + } + return ret; + +} + +static void __exit arcfb_exit(void) +{ + platform_device_unregister(&arcfb_device); + driver_unregister(&arcfb_driver); +} + +module_param(num_cols, ulong, 0); +MODULE_PARM_DESC(num_cols, "Num horiz panels, eg: 2 = 128 bit wide"); +module_param(num_rows, ulong, 0); +MODULE_PARM_DESC(num_rows, "Num vert panels, eg: 1 = 64 bit high"); +module_param(nosplash, uint, 0); +MODULE_PARM_DESC(nosplash, "Disable doing the splash screen"); +module_param(arcfb_enable, uint, 0); +MODULE_PARM_DESC(arcfb_enable, "Enable communication with Arc board"); +module_param(dio_addr, ulong, 0); +MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480"); +module_param(cio_addr, ulong, 0); +MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400"); +module_param(c2io_addr, ulong, 0); +MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408"); +module_param(splashval, ulong, 0); +MODULE_PARM_DESC(splashval, "Splash pattern: 0xFF is black, 0x00 is green"); +module_param(tuhold, ulong, 0); +MODULE_PARM_DESC(tuhold, "Time to hold between strobing data to Arc board"); +module_param(irq, uint, 0); +MODULE_PARM_DESC(irq, "IRQ for the Arc board"); + +module_init(arcfb_init); +module_exit(arcfb_exit); + +MODULE_DESCRIPTION("fbdev driver for Arc monochrome LCD board"); +MODULE_AUTHOR("Jaya Kumar"); +MODULE_LICENSE("GPL"); + diff --git a/include/linux/arcfb.h b/include/linux/arcfb.h new file mode 100644 index 000000000000..721e7654daeb --- /dev/null +++ b/include/linux/arcfb.h @@ -0,0 +1,8 @@ +#ifndef __LINUX_ARCFB_H__ +#define __LINUX_ARCFB_H__ + +#define FBIO_WAITEVENT _IO('F', 0x88) +#define FBIO_GETCONTROL2 _IOR('F', 0x89, size_t) + +#endif + -- cgit v1.2.3 From cc0b07ed479fd92806aef7d6dbc58b6dc6da3796 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 22 May 2005 09:39:11 +0200 Subject: [PATCH] I2C: Sensors mailing list has moved The following patch updates all references to the sensors mailing list, so as to reflect the fact that the list recently moved to a new home and changed addresses. I'll work out a similar patch for Linux 2.4 soon. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/i2c/busses/i2c-sis69x | 2 +- Documentation/i2c/porting-clients | 2 +- MAINTAINERS | 16 ++++++++-------- 3 files changed, 10 insertions(+), 10 deletions(-) (limited to 'MAINTAINERS') diff --git a/Documentation/i2c/busses/i2c-sis69x b/Documentation/i2c/busses/i2c-sis69x index 5be48769f65b..b88953dfd580 100644 --- a/Documentation/i2c/busses/i2c-sis69x +++ b/Documentation/i2c/busses/i2c-sis69x @@ -42,7 +42,7 @@ I suspect that this driver could be made to work for the following SiS chipsets as well: 635, and 635T. If anyone owns a board with those chips AND is willing to risk crashing & burning an otherwise well-behaved kernel in the name of progress... please contact me at or -via the project's mailing list: . Please +via the project's mailing list: . Please send bug reports and/or success stories as well. diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients index 56404918eabc..a7adbdd9ea8a 100644 --- a/Documentation/i2c/porting-clients +++ b/Documentation/i2c/porting-clients @@ -57,7 +57,7 @@ Technical changes: Documentation/i2c/sysfs-interface for the individual files. Also convert the units these files read and write to the specified ones. If you need to add a new type of file, please discuss it on the - sensors mailing list by providing a + sensors mailing list by providing a patch to the Documentation/i2c/sysfs-interface file. * [Attach] For I2C drivers, the attach function should make sure diff --git a/MAINTAINERS b/MAINTAINERS index 0f88a70a15d8..4d44824884ef 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -194,7 +194,7 @@ S: Maintained ADM1025 HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org -L: sensors@stimpy.netroedge.com +L: lm-sensors@lm-sensors.org S: Maintained ADT746X FAN DRIVER @@ -242,7 +242,7 @@ S: Maintained ALI1563 I2C DRIVER P: Rudolf Marek M: r.marek@sh.cvut.cz -L: sensors@stimpy.netroedge.com +L: lm-sensors@lm-sensors.org S: Maintained ALPHA PORT @@ -1002,7 +1002,7 @@ P: Greg Kroah-Hartman M: greg@kroah.com P: Jean Delvare M: khali@linux-fr.org -L: sensors@stimpy.netroedge.com +L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.nu/ S: Maintained @@ -1430,13 +1430,13 @@ S: Supported LM83 HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org -L: sensors@stimpy.netroedge.com +L: lm-sensors@lm-sensors.org S: Maintained LM90 HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org -L: sensors@stimpy.netroedge.com +L: lm-sensors@lm-sensors.org S: Maintained LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP Dynamic Disks) @@ -2075,7 +2075,7 @@ S: Maintained SMSC47M1 HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org -L: sensors@stimpy.netroedge.com +L: lm-sensors@lm-sensors.org S: Odd Fixes SMB FILESYSTEM @@ -2614,7 +2614,7 @@ S: Orphan W1 DALLAS'S 1-WIRE BUS P: Evgeniy Polyakov M: johnpol@2ka.mipt.ru -L: sensors@stimpy.netroedge.com +L: lm-sensors@lm-sensors.org S: Maintained W83L51xD SD/MMC CARD INTERFACE DRIVER @@ -2627,7 +2627,7 @@ S: Maintained W83L785TS HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org -L: sensors@stimpy.netroedge.com +L: lm-sensors@lm-sensors.org S: Odd Fixes WAN ROUTER & SANGOMA WANPIPE DRIVERS & API (X.25, FRAME RELAY, PPP, CISCO HDLC) -- cgit v1.2.3 From fef1c772fa154c16e0a54577e9ecb5480f7b937e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Jun 2005 09:43:37 +1000 Subject: [PATCH] ppc64: add BPA platform type This adds the basic support for running on BPA machines. So far, this is only the IBM workstation, and it will not run on others without a little more generalization. It should be possible to configure a kernel for any combination of CONFIG_PPC_BPA with any of the other multiplatform targets. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- MAINTAINERS | 7 ++ arch/ppc64/Kconfig | 6 +- arch/ppc64/Makefile | 2 + arch/ppc64/kernel/Makefile | 3 + arch/ppc64/kernel/bpa_setup.c | 135 +++++++++++++++++++++++++++++++++++ arch/ppc64/kernel/cpu_setup_power4.S | 16 ++++- arch/ppc64/kernel/cputable.c | 11 +++ arch/ppc64/kernel/irq.c | 3 + arch/ppc64/kernel/proc_ppc64.c | 2 +- arch/ppc64/kernel/prom_init.c | 4 +- arch/ppc64/kernel/setup.c | 4 ++ arch/ppc64/kernel/traps.c | 4 ++ include/asm-ppc64/mmu.h | 5 +- include/asm-ppc64/processor.h | 15 +++- include/asm-ppc64/smp.h | 8 +++ 15 files changed, 216 insertions(+), 9 deletions(-) create mode 100644 arch/ppc64/kernel/bpa_setup.c (limited to 'MAINTAINERS') diff --git a/MAINTAINERS b/MAINTAINERS index 4d44824884ef..5eaa6807cdb7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -504,6 +504,13 @@ L: bonding-devel@lists.sourceforge.net W: http://sourceforge.net/projects/bonding/ S: Supported +BROADBAND PROCESSOR ARCHITECTURE +P: Arnd Bergmann +M: arnd@arndb.de +L: linuxppc64-dev@ozlabs.org +W: http://linuxppc64.org +S: Supported + BTTV VIDEO4LINUX DRIVER P: Gerd Knorr M: kraxel@bytesex.org diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 0f1fa289744e..c7f2f0a4d856 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -77,6 +77,10 @@ config PPC_PSERIES bool " IBM pSeries & new iSeries" default y +config PPC_BPA + bool " Broadband Processor Architecture" + depends on PPC_MULTIPLATFORM + config PPC_PMAC depends on PPC_MULTIPLATFORM bool " Apple G5 based machines" @@ -256,7 +260,7 @@ config MSCHUNKS config PPC_RTAS bool - depends on PPC_PSERIES + depends on PPC_PSERIES || PPC_BPA default y config RTAS_PROC diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index 33c752ceca4b..731b84758331 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -90,12 +90,14 @@ boot := arch/ppc64/boot boottarget-$(CONFIG_PPC_PSERIES) := zImage zImage.initrd boottarget-$(CONFIG_PPC_MAPLE) := zImage zImage.initrd boottarget-$(CONFIG_PPC_ISERIES) := vmlinux.sminitrd vmlinux.initrd vmlinux.sm +boottarget-$(CONFIG_PPC_BPA) := zImage zImage.initrd $(boottarget-y): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage bootimage-$(CONFIG_PPC_PMAC) := vmlinux bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage +bootimage-$(CONFIG_PPC_BPA) := zImage bootimage-$(CONFIG_PPC_ISERIES) := vmlinux BOOTIMAGE := $(bootimage-y) install: vmlinux diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index f389f2453daa..c89983ab9098 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -33,6 +33,8 @@ obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \ pSeries_nvram.o rtasd.o ras.o pSeries_reconfig.o \ xics.o pSeries_setup.o pSeries_iommu.o +obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_nvram.o + obj-$(CONFIG_EEH) += eeh.o obj-$(CONFIG_PROC_FS) += proc_ppc64.o obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o @@ -59,6 +61,7 @@ ifdef CONFIG_SMP obj-$(CONFIG_PPC_PMAC) += pmac_smp.o smp-tbsync.o obj-$(CONFIG_PPC_ISERIES) += iSeries_smp.o obj-$(CONFIG_PPC_PSERIES) += pSeries_smp.o +obj-$(CONFIG_PPC_BPA) += pSeries_smp.o obj-$(CONFIG_PPC_MAPLE) += smp-tbsync.o endif diff --git a/arch/ppc64/kernel/bpa_setup.c b/arch/ppc64/kernel/bpa_setup.c new file mode 100644 index 000000000000..d1992dd2d61b --- /dev/null +++ b/arch/ppc64/kernel/bpa_setup.c @@ -0,0 +1,135 @@ +/* + * linux/arch/ppc/kernel/bpa_setup.c + * + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified by PPC64 Team, IBM Corp + * Modified by BPA Team, IBM Deutschland Entwicklung GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pci.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +void bpa_get_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *model = ""; + + root = of_find_node_by_path("/"); + if (root) + model = get_property(root, "model", NULL); + seq_printf(m, "machine\t\t: BPA %s\n", model); + of_node_put(root); +} + +static void bpa_progress(char *s, unsigned short hex) +{ + printk("*** %04x : %s\n", hex, s ? s : ""); +} + +static void __init bpa_setup_arch(void) +{ +#ifdef CONFIG_SMP + smp_init_pSeries(); +#endif + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000; + + if (ROOT_DEV == 0) { + printk("No ramdisk, default root is /dev/hda2\n"); + ROOT_DEV = Root_HDA2; + } + + /* Find and initialize PCI host bridges */ + init_pci_config_tokens(); + find_and_init_phbs(); + +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + + bpa_nvram_init(); +} + +/* + * Early initialization. Relocation is on but do not reference unbolted pages + */ +static void __init bpa_init_early(void) +{ + DBG(" -> bpa_init_early()\n"); + + hpte_init_native(); + + pci_direct_iommu_init(); + + ppc64_interrupt_controller = IC_BPA_IIC; + + DBG(" <- bpa_init_early()\n"); +} + + +static int __init bpa_probe(int platform) +{ + if (platform != PLATFORM_BPA) + return 0; + + return 1; +} + +struct machdep_calls __initdata bpa_md = { + .probe = bpa_probe, + .setup_arch = bpa_setup_arch, + .init_early = bpa_init_early, + .get_cpuinfo = bpa_get_cpuinfo, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .get_boot_time = rtas_get_boot_time, + .get_rtc_time = rtas_get_rtc_time, + .set_rtc_time = rtas_set_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = bpa_progress, +}; diff --git a/arch/ppc64/kernel/cpu_setup_power4.S b/arch/ppc64/kernel/cpu_setup_power4.S index 3bd951820850..42fc08cf87a0 100644 --- a/arch/ppc64/kernel/cpu_setup_power4.S +++ b/arch/ppc64/kernel/cpu_setup_power4.S @@ -73,7 +73,21 @@ _GLOBAL(__970_cpu_preinit) _GLOBAL(__setup_cpu_power4) blr - + +_GLOBAL(__setup_cpu_be) + /* Set large page sizes LP=0: 16MB, LP=1: 64KB */ + addi r3, 0, 0 + ori r3, r3, HID6_LB + sldi r3, r3, 32 + nor r3, r3, r3 + mfspr r4, SPRN_HID6 + and r4, r4, r3 + addi r3, 0, 0x02000 + sldi r3, r3, 32 + or r4, r4, r3 + mtspr SPRN_HID6, r4 + blr + _GLOBAL(__setup_cpu_ppc970) mfspr r0,SPRN_HID0 li r11,5 /* clear DOZE and SLEEP */ diff --git a/arch/ppc64/kernel/cputable.c b/arch/ppc64/kernel/cputable.c index 8644a8648058..1d162c7c59df 100644 --- a/arch/ppc64/kernel/cputable.c +++ b/arch/ppc64/kernel/cputable.c @@ -34,6 +34,7 @@ EXPORT_SYMBOL(cur_cpu_spec); extern void __setup_cpu_power3(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_power4(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_be(unsigned long offset, struct cpu_spec* spec); /* We only set the altivec features if the kernel was compiled with altivec @@ -162,6 +163,16 @@ struct cpu_spec cpu_specs[] = { __setup_cpu_power4, COMMON_PPC64_FW }, + { /* BE DD1.x */ + 0xffff0000, 0x00700000, "Broadband Engine", + CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | + CPU_FTR_SMT, + COMMON_USER_PPC64 | PPC_FEATURE_HAS_ALTIVEC_COMP, + 128, 128, + __setup_cpu_be, + COMMON_PPC64_FW + }, { /* default match */ 0x00000000, 0x00000000, "POWER4 (compatible)", CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c index d860467b8f09..3defc8c33adf 100644 --- a/arch/ppc64/kernel/irq.c +++ b/arch/ppc64/kernel/irq.c @@ -395,6 +395,9 @@ int virt_irq_create_mapping(unsigned int real_irq) if (ppc64_interrupt_controller == IC_OPEN_PIC) return real_irq; /* no mapping for openpic (for now) */ + if (ppc64_interrupt_controller == IC_BPA_IIC) + return real_irq; /* no mapping for iic either */ + /* don't map interrupts < MIN_VIRT_IRQ */ if (real_irq < MIN_VIRT_IRQ) { virt_irq_to_real_map[real_irq] = real_irq; diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/ppc64/kernel/proc_ppc64.c index 0914b0669b05..a87c66a9652a 100644 --- a/arch/ppc64/kernel/proc_ppc64.c +++ b/arch/ppc64/kernel/proc_ppc64.c @@ -53,7 +53,7 @@ static int __init proc_ppc64_create(void) if (!root) return 1; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_BPA))) return 0; if (!proc_mkdir("rtas", root)) diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index b7683abfbe6a..e248a7950aeb 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1915,9 +1915,9 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long prom_send_capabilities(); /* - * On pSeries, copy the CPU hold code + * On pSeries and BPA, copy the CPU hold code */ - if (RELOC(of_platform) & PLATFORM_PSERIES) + if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_BPA)) copy_and_flush(0, KERNELBASE - offset, 0x100, 0); /* diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index 93b0ee88cda1..10222008fe20 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -344,6 +344,7 @@ static void __init setup_cpu_maps(void) extern struct machdep_calls pSeries_md; extern struct machdep_calls pmac_md; extern struct machdep_calls maple_md; +extern struct machdep_calls bpa_md; /* Ultimately, stuff them in an elf section like initcalls... */ static struct machdep_calls __initdata *machines[] = { @@ -356,6 +357,9 @@ static struct machdep_calls __initdata *machines[] = { #ifdef CONFIG_PPC_MAPLE &maple_md, #endif /* CONFIG_PPC_MAPLE */ +#ifdef CONFIG_PPC_BPA + &bpa_md, +#endif NULL }; diff --git a/arch/ppc64/kernel/traps.c b/arch/ppc64/kernel/traps.c index 7e52cb2605e0..a8d5e83ee89f 100644 --- a/arch/ppc64/kernel/traps.c +++ b/arch/ppc64/kernel/traps.c @@ -126,6 +126,10 @@ int die(const char *str, struct pt_regs *regs, long err) printk("POWERMAC "); nl = 1; break; + case PLATFORM_BPA: + printk("BPA "); + nl = 1; + break; } if (nl) printk("\n"); diff --git a/include/asm-ppc64/mmu.h b/include/asm-ppc64/mmu.h index c78282a67d8e..9d03a98a4fa3 100644 --- a/include/asm-ppc64/mmu.h +++ b/include/asm-ppc64/mmu.h @@ -47,9 +47,10 @@ #define SLB_VSID_KS ASM_CONST(0x0000000000000800) #define SLB_VSID_KP ASM_CONST(0x0000000000000400) #define SLB_VSID_N ASM_CONST(0x0000000000000200) /* no-execute */ -#define SLB_VSID_L ASM_CONST(0x0000000000000100) /* largepage 16M */ +#define SLB_VSID_L ASM_CONST(0x0000000000000100) /* largepage */ #define SLB_VSID_C ASM_CONST(0x0000000000000080) /* class */ - +#define SLB_VSID_LS ASM_CONST(0x0000000000000070) /* size of largepage */ + #define SLB_VSID_KERNEL (SLB_VSID_KP|SLB_VSID_C) #define SLB_VSID_USER (SLB_VSID_KP|SLB_VSID_KS) diff --git a/include/asm-ppc64/processor.h b/include/asm-ppc64/processor.h index 3084099086a8..af28aa55d8c1 100644 --- a/include/asm-ppc64/processor.h +++ b/include/asm-ppc64/processor.h @@ -138,8 +138,16 @@ #define SPRN_NIADORM 0x3F3 /* Hardware Implementation Register 2 */ #define SPRN_HID4 0x3F4 /* 970 HID4 */ #define SPRN_HID5 0x3F6 /* 970 HID5 */ -#define SPRN_TSC 0x3FD /* Thread switch control */ -#define SPRN_TST 0x3FC /* Thread switch timeout */ +#define SPRN_HID6 0x3F9 /* BE HID 6 */ +#define HID6_LB (0x0F<<12) /* Concurrent Large Page Modes */ +#define HID6_DLP (1<<20) /* Disable all large page modes (4K only) */ +#define SPRN_TSCR 0x399 /* Thread switch control on BE */ +#define SPRN_TTR 0x39A /* Thread switch timeout on BE */ +#define TSCR_DEC_ENABLE 0x200000 /* Decrementer Interrupt */ +#define TSCR_EE_ENABLE 0x100000 /* External Interrupt */ +#define TSCR_EE_BOOST 0x080000 /* External Interrupt Boost */ +#define SPRN_TSC 0x3FD /* Thread switch control on others */ +#define SPRN_TST 0x3FC /* Thread switch timeout on others */ #define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ #define SPRN_LR 0x008 /* Link Register */ #define SPRN_PIR 0x3FF /* Processor Identification Register */ @@ -259,6 +267,7 @@ #define PV_970FX 0x003C #define PV_630 0x0040 #define PV_630p 0x0041 +#define PV_BE 0x0070 /* Platforms supported by PPC64 */ #define PLATFORM_PSERIES 0x0100 @@ -267,6 +276,7 @@ #define PLATFORM_LPAR 0x0001 #define PLATFORM_POWERMAC 0x0400 #define PLATFORM_MAPLE 0x0500 +#define PLATFORM_BPA 0x1000 /* Compatibility with drivers coming from PPC32 world */ #define _machine (systemcfg->platform) @@ -278,6 +288,7 @@ #define IC_INVALID 0 #define IC_OPEN_PIC 1 #define IC_PPC_XIC 2 +#define IC_BPA_IIC 3 #define XGLUE(a,b) a##b #define GLUE(a,b) XGLUE(a,b) diff --git a/include/asm-ppc64/smp.h b/include/asm-ppc64/smp.h index 8115ecb8feee..d86f742e9a21 100644 --- a/include/asm-ppc64/smp.h +++ b/include/asm-ppc64/smp.h @@ -85,6 +85,14 @@ extern void smp_generic_take_timebase(void); extern struct smp_ops_t *smp_ops; +#ifdef CONFIG_PPC_PSERIES +void vpa_init(int cpu); +#else +static inline void vpa_init(int cpu) +{ +} +#endif /* CONFIG_PPC_PSERIES */ + #endif /* __ASSEMBLY__ */ #endif /* !(_PPC64_SMP_H) */ -- cgit v1.2.3 From 70f09f1fdf38cd7fca39913978d18cf998ab2c80 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 23 Jun 2005 00:09:47 -0700 Subject: [PATCH] Document the fact that linux-arm-kernel is subscribers-only. "Non-members are not allowed to post messages to this list. Blame the original poster for cross-posting to subscriber-only mailing lists. " Signed-off-by: Alexey Dobriyan Acked-by: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'MAINTAINERS') diff --git a/MAINTAINERS b/MAINTAINERS index 4d44824884ef..fc4b0e8bca6b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -304,7 +304,7 @@ S: Maintained ARM/PT DIGITAL BOARD PORT P: Stefan Eletzhofer M: stefan.eletzhofer@eletztrick.de -L: linux-arm-kernel@lists.arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.arm.linux.org.uk/ S: Maintained @@ -317,21 +317,21 @@ S: Maintained ARM/STRONGARM110 PORT P: Russell King M: rmk@arm.linux.org.uk -L: linux-arm-kernel@lists.arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.arm.linux.org.uk/ S: Maintained ARM/S3C2410 ARM ARCHITECTURE P: Ben Dooks M: ben-s3c2410@fluff.org -L: linux-arm-kernel@lists.arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.fluff.org/ben/linux/ S: Maintained ARM/S3C2440 ARM ARCHITECTURE P: Ben Dooks M: ben-s3c2440@fluff.org -L: linux-arm-kernel@lists.arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.fluff.org/ben/linux/ S: Maintained @@ -1853,7 +1853,7 @@ S: Maintained PXA2xx SUPPORT P: Nicolas Pitre M: nico@cam.org -L: linux-arm-kernel@lists.arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained QLOGIC QLA2XXX FC-SCSI DRIVER @@ -2155,7 +2155,7 @@ SHARP LH SUPPORT (LH7952X & LH7A40X) P: Marc Singer M: elf@buici.com W: http://projects.buici.com/arm -L: linux-arm-kernel@lists.arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained SPARC (sparc32): -- cgit v1.2.3 From 48b415ca13bac91f83db3b9d362fd5ae0ce275cb Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Thu, 23 Jun 2005 22:01:07 -0700 Subject: [PATCH] xtensa: Tensilica Xtensa CPU arch maintainer record Start of a patch series which adds support for the xtensa architecture to Linux. The Xtensa architecture is highly configurable and usually buried inside an SOC device. So, if you buy a new printer, digital camera, or cell phone, there is a chance that there is an Xtensa inside even though you don't know it (sometimes as a small audio-engine or as a control CPU). Linux hasn't been adopted widely with Xtensa yet, but with Linux growing in the embedded space, I am sure it will become much more important. The attached patch supplies the maintainer record for an architecture implementation for the Tensilica Xtensa CPU series. Signed-off-by: Chris Zankel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'MAINTAINERS') diff --git a/MAINTAINERS b/MAINTAINERS index 651af5012c98..a07eeb411370 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2145,6 +2145,11 @@ W: http://tpmdd.sourceforge.net L: tpmdd-devel@lists.sourceforge.net S: Maintained +TENSILICA XTENSA PORT (xtensa): +P: Chris Zankel +M: chris@zankel.net +S: Maintained + UltraSPARC (sparc64): P: David S. Miller M: davem@davemloft.net -- cgit v1.2.3 From fc5fb2c609c6acef15a8b062063e9135fb08b4d2 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Sat, 25 Jun 2005 14:55:07 -0700 Subject: [PATCH] swsusp: documentation updates This updates documentation and fixes pointers in MAINTAINERS file. Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/power/swsusp.txt | 84 ++++++++++++++++++++++++++++++++++++++++-- MAINTAINERS | 4 +- 2 files changed, 82 insertions(+), 6 deletions(-) (limited to 'MAINTAINERS') diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index c7c3459fde43..8363c51831d3 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -164,11 +164,11 @@ place where the thread is safe to be frozen (no kernel semaphores should be held at that point and it must be safe to sleep there), and add: - if (current->flags & PF_FREEZE) - refrigerator(PF_FREEZE); + try_to_freeze(PF_FREEZE); If the thread is needed for writing the image to storage, you should -instead set the PF_NOFREEZE process flag when creating the thread. +instead set the PF_NOFREEZE process flag when creating the thread (and +be very carefull). Q: What is the difference between between "platform", "shutdown" and @@ -233,3 +233,81 @@ A: Try running cat `cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u` > /dev/null after resume. swapoff -a; swapon -a may also be usefull. + +Q: What happens to devices during swsusp? They seem to be resumed +during system suspend? + +A: That's correct. We need to resume them if we want to write image to +disk. Whole sequence goes like + + Suspend part + ~~~~~~~~~~~~ + running system, user asks for suspend-to-disk + + user processes are stopped + + suspend(PMSG_FREEZE): devices are frozen so that they don't interfere + with state snapshot + + state snapshot: copy of whole used memory is taken with interrupts disabled + + resume(): devices are woken up so that we can write image to swap + + write image to swap + + suspend(PMSG_SUSPEND): suspend devices so that we can power off + + turn the power off + + Resume part + ~~~~~~~~~~~ + (is actually pretty similar) + + running system, user asks for suspend-to-disk + + user processes are stopped (in common case there are none, but with resume-from-initrd, noone knows) + + read image from disk + + suspend(PMSG_FREEZE): devices are frozen so that they don't interfere + with image restoration + + image restoration: rewrite memory with image + + resume(): devices are woken up so that system can continue + + thaw all user processes + +Q: What is this 'Encrypt suspend image' for? + +A: First of all: it is not a replacement for dm-crypt encrypted swap. +It cannot protect your computer while it is suspended. Instead it does +protect from leaking sensitive data after resume from suspend. + +Think of the following: you suspend while an application is running +that keeps sensitive data in memory. The application itself prevents +the data from being swapped out. Suspend, however, must write these +data to swap to be able to resume later on. Without suspend encryption +your sensitive data are then stored in plaintext on disk. This means +that after resume your sensitive data are accessible to all +applications having direct access to the swap device which was used +for suspend. If you don't need swap after resume these data can remain +on disk virtually forever. Thus it can happen that your system gets +broken in weeks later and sensitive data which you thought were +encrypted and protected are retrieved and stolen from the swap device. +To prevent this situation you should use 'Encrypt suspend image'. + +During suspend a temporary key is created and this key is used to +encrypt the data written to disk. When, during resume, the data was +read back into memory the temporary key is destroyed which simply +means that all data written to disk during suspend are then +inaccessible so they can't be stolen later on. The only thing that +you must then take care of is that you call 'mkswap' for the swap +partition used for suspend as early as possible during regular +boot. This asserts that any temporary key from an oopsed suspend or +from a failed or aborted resume is erased from the swap device. + +As a rule of thumb use encrypted swap to protect your data while your +system is shut down or suspended. Additionally use the encrypted +suspend image to prevent sensitive data from being stolen after +resume. diff --git a/MAINTAINERS b/MAINTAINERS index a07eeb411370..dbdd8494b2e6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2115,9 +2115,7 @@ S: Maintained SOFTWARE SUSPEND: P: Pavel Machek M: pavel@suse.cz -M: pavel@ucw.cz -L: http://lister.fornax.hu/mailman/listinfo/swsusp -W: http://swsusp.sf.net/ +L: linux-pm@osdl.org S: Maintained SONIC NETWORK DRIVER -- cgit v1.2.3 From dc009d92435f99498cbc579ce76bf28e837e2c14 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 25 Jun 2005 14:57:52 -0700 Subject: [PATCH] kexec: add kexec syscalls This patch introduces the architecture independent implementation the sys_kexec_load, the compat_sys_kexec_load system calls. Kexec on panic support has been integrated into the core patch and is relatively clean. In addition the hopefully architecture independent option crashkernel=size@location has been docuemented. It's purpose is to reserve space for the panic kernel to live, and where no DMA transfer will ever be setup to access. Signed-off-by: Eric Biederman Signed-off-by: Alexander Nyberg Signed-off-by: Adrian Bunk Signed-off-by: Vivek Goyal Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/kernel-parameters.txt | 4 + MAINTAINERS | 10 + include/linux/kexec.h | 127 +++++ include/linux/reboot.h | 3 + include/linux/syscalls.h | 5 +- kernel/Makefile | 1 + kernel/kexec.c | 1036 +++++++++++++++++++++++++++++++++++ kernel/panic.c | 23 +- kernel/sys.c | 20 + kernel/sys_ni.c | 2 + 10 files changed, 1227 insertions(+), 4 deletions(-) create mode 100644 include/linux/kexec.h create mode 100644 kernel/kexec.c (limited to 'MAINTAINERS') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 86db43fd6b0f..560ff5ae3fd9 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -358,6 +358,10 @@ running once the system is up. cpia_pp= [HW,PPT] Format: { parport | auto | none } + crashkernel=nn[KMG]@ss[KMG] + [KNL] Reserve a chunk of physical memory to + hold a kernel to switch to with kexec on panic. + cs4232= [HW,OSS] Format: ,,,,, diff --git a/MAINTAINERS b/MAINTAINERS index dbdd8494b2e6..81728572799e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1330,6 +1330,16 @@ M: rml@novell.com L: linux-kernel@vger.kernel.org S: Maintained +KEXEC +P: Eric Biederman +P: Randy Dunlap +M: ebiederm@xmission.com +M: rddunlap@osdl.org +W: http://www.xmission.com/~ebiederm/files/kexec/ +L: linux-kernel@vger.kernel.org +L: fastboot@osdl.org +S: Maintained + LANMEDIA WAN CARD DRIVER P: Andrew Stanley-Jones M: asj@lanmedia.com diff --git a/include/linux/kexec.h b/include/linux/kexec.h new file mode 100644 index 000000000000..e3fc35f4e35f --- /dev/null +++ b/include/linux/kexec.h @@ -0,0 +1,127 @@ +#ifndef LINUX_KEXEC_H +#define LINUX_KEXEC_H + +#ifdef CONFIG_KEXEC +#include +#include +#include +#include +#include + +/* Verify architecture specific macros are defined */ + +#ifndef KEXEC_SOURCE_MEMORY_LIMIT +#error KEXEC_SOURCE_MEMORY_LIMIT not defined +#endif + +#ifndef KEXEC_DESTINATION_MEMORY_LIMIT +#error KEXEC_DESTINATION_MEMORY_LIMIT not defined +#endif + +#ifndef KEXEC_CONTROL_MEMORY_LIMIT +#error KEXEC_CONTROL_MEMORY_LIMIT not defined +#endif + +#ifndef KEXEC_CONTROL_CODE_SIZE +#error KEXEC_CONTROL_CODE_SIZE not defined +#endif + +#ifndef KEXEC_ARCH +#error KEXEC_ARCH not defined +#endif + +/* + * This structure is used to hold the arguments that are used when loading + * kernel binaries. + */ + +typedef unsigned long kimage_entry_t; +#define IND_DESTINATION 0x1 +#define IND_INDIRECTION 0x2 +#define IND_DONE 0x4 +#define IND_SOURCE 0x8 + +#define KEXEC_SEGMENT_MAX 8 +struct kexec_segment { + void __user *buf; + size_t bufsz; + unsigned long mem; /* User space sees this as a (void *) ... */ + size_t memsz; +}; + +#ifdef CONFIG_COMPAT +struct compat_kexec_segment { + compat_uptr_t buf; + compat_size_t bufsz; + compat_ulong_t mem; /* User space sees this as a (void *) ... */ + compat_size_t memsz; +}; +#endif + +struct kimage { + kimage_entry_t head; + kimage_entry_t *entry; + kimage_entry_t *last_entry; + + unsigned long destination; + + unsigned long start; + struct page *control_code_page; + + unsigned long nr_segments; + struct kexec_segment segment[KEXEC_SEGMENT_MAX]; + + struct list_head control_pages; + struct list_head dest_pages; + struct list_head unuseable_pages; + + /* Address of next control page to allocate for crash kernels. */ + unsigned long control_page; + + /* Flags to indicate special processing */ + unsigned int type : 1; +#define KEXEC_TYPE_DEFAULT 0 +#define KEXEC_TYPE_CRASH 1 +}; + + + +/* kexec interface functions */ +extern NORET_TYPE void machine_kexec(struct kimage *image) ATTRIB_NORET; +extern int machine_kexec_prepare(struct kimage *image); +extern void machine_kexec_cleanup(struct kimage *image); +extern asmlinkage long sys_kexec_load(unsigned long entry, + unsigned long nr_segments, struct kexec_segment __user *segments, + unsigned long flags); +#ifdef CONFIG_COMPAT +extern asmlinkage long compat_sys_kexec_load(unsigned long entry, + unsigned long nr_segments, struct compat_kexec_segment __user *segments, + unsigned long flags); +#endif +extern struct page *kimage_alloc_control_pages(struct kimage *image, unsigned int order); +extern void crash_kexec(void); +extern struct kimage *kexec_image; + +#define KEXEC_ON_CRASH 0x00000001 +#define KEXEC_ARCH_MASK 0xffff0000 + +/* These values match the ELF architecture values. + * Unless there is a good reason that should continue to be the case. + */ +#define KEXEC_ARCH_DEFAULT ( 0 << 16) +#define KEXEC_ARCH_386 ( 3 << 16) +#define KEXEC_ARCH_X86_64 (62 << 16) +#define KEXEC_ARCH_PPC (20 << 16) +#define KEXEC_ARCH_PPC64 (21 << 16) +#define KEXEC_ARCH_IA_64 (50 << 16) + +#define KEXEC_FLAGS (KEXEC_ON_CRASH) /* List of defined/legal kexec flags */ + +/* Location of a reserved region to hold the crash kernel. + */ +extern struct resource crashk_res; + +#else /* !CONFIG_KEXEC */ +static inline void crash_kexec(void) { } +#endif /* CONFIG_KEXEC */ +#endif /* LINUX_KEXEC_H */ diff --git a/include/linux/reboot.h b/include/linux/reboot.h index d60fafc8bdc5..c5a05e16edb2 100644 --- a/include/linux/reboot.h +++ b/include/linux/reboot.h @@ -51,6 +51,9 @@ extern void machine_restart(char *cmd); extern void machine_halt(void); extern void machine_power_off(void); +extern void machine_shutdown(void); +extern void machine_crash_shutdown(void); + #endif #endif /* _LINUX_REBOOT_H */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index c39f6f72cbbc..7ba8f8f747aa 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -159,8 +159,9 @@ asmlinkage long sys_shutdown(int, int); asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd, void __user *arg); asmlinkage long sys_restart_syscall(void); -asmlinkage long sys_kexec_load(void *entry, unsigned long nr_segments, - struct kexec_segment *segments, unsigned long flags); +asmlinkage long sys_kexec_load(unsigned long entry, + unsigned long nr_segments, struct kexec_segment __user *segments, + unsigned long flags); asmlinkage long sys_exit(int error_code); asmlinkage void sys_exit_group(int error_code); diff --git a/kernel/Makefile b/kernel/Makefile index b01d26fe8db7..cfc8b0dea950 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_KALLSYMS) += kallsyms.o obj-$(CONFIG_PM) += power/ obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o +obj-$(CONFIG_KEXEC) += kexec.o obj-$(CONFIG_COMPAT) += compat.o obj-$(CONFIG_CPUSETS) += cpuset.o obj-$(CONFIG_IKCONFIG) += configs.o diff --git a/kernel/kexec.c b/kernel/kexec.c new file mode 100644 index 000000000000..def9c73ec9a6 --- /dev/null +++ b/kernel/kexec.c @@ -0,0 +1,1036 @@ +/* + * kexec.c - kexec system call + * Copyright (C) 2002-2004 Eric Biederman + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Location of the reserved area for the crash kernel */ +struct resource crashk_res = { + .name = "Crash kernel", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; + +/* + * When kexec transitions to the new kernel there is a one-to-one + * mapping between physical and virtual addresses. On processors + * where you can disable the MMU this is trivial, and easy. For + * others it is still a simple predictable page table to setup. + * + * In that environment kexec copies the new kernel to its final + * resting place. This means I can only support memory whose + * physical address can fit in an unsigned long. In particular + * addresses where (pfn << PAGE_SHIFT) > ULONG_MAX cannot be handled. + * If the assembly stub has more restrictive requirements + * KEXEC_SOURCE_MEMORY_LIMIT and KEXEC_DEST_MEMORY_LIMIT can be + * defined more restrictively in . + * + * The code for the transition from the current kernel to the + * the new kernel is placed in the control_code_buffer, whose size + * is given by KEXEC_CONTROL_CODE_SIZE. In the best case only a single + * page of memory is necessary, but some architectures require more. + * Because this memory must be identity mapped in the transition from + * virtual to physical addresses it must live in the range + * 0 - TASK_SIZE, as only the user space mappings are arbitrarily + * modifiable. + * + * The assembly stub in the control code buffer is passed a linked list + * of descriptor pages detailing the source pages of the new kernel, + * and the destination addresses of those source pages. As this data + * structure is not used in the context of the current OS, it must + * be self-contained. + * + * The code has been made to work with highmem pages and will use a + * destination page in its final resting place (if it happens + * to allocate it). The end product of this is that most of the + * physical address space, and most of RAM can be used. + * + * Future directions include: + * - allocating a page table with the control code buffer identity + * mapped, to simplify machine_kexec and make kexec_on_panic more + * reliable. + */ + +/* + * KIMAGE_NO_DEST is an impossible destination address..., for + * allocating pages whose destination address we do not care about. + */ +#define KIMAGE_NO_DEST (-1UL) + +static int kimage_is_destination_range( + struct kimage *image, unsigned long start, unsigned long end); +static struct page *kimage_alloc_page(struct kimage *image, unsigned int gfp_mask, unsigned long dest); + +static int do_kimage_alloc(struct kimage **rimage, unsigned long entry, + unsigned long nr_segments, struct kexec_segment __user *segments) +{ + size_t segment_bytes; + struct kimage *image; + unsigned long i; + int result; + + /* Allocate a controlling structure */ + result = -ENOMEM; + image = kmalloc(sizeof(*image), GFP_KERNEL); + if (!image) { + goto out; + } + memset(image, 0, sizeof(*image)); + image->head = 0; + image->entry = &image->head; + image->last_entry = &image->head; + image->control_page = ~0; /* By default this does not apply */ + image->start = entry; + image->type = KEXEC_TYPE_DEFAULT; + + /* Initialize the list of control pages */ + INIT_LIST_HEAD(&image->control_pages); + + /* Initialize the list of destination pages */ + INIT_LIST_HEAD(&image->dest_pages); + + /* Initialize the list of unuseable pages */ + INIT_LIST_HEAD(&image->unuseable_pages); + + /* Read in the segments */ + image->nr_segments = nr_segments; + segment_bytes = nr_segments * sizeof(*segments); + result = copy_from_user(image->segment, segments, segment_bytes); + if (result) + goto out; + + /* + * Verify we have good destination addresses. The caller is + * responsible for making certain we don't attempt to load + * the new image into invalid or reserved areas of RAM. This + * just verifies it is an address we can use. + * + * Since the kernel does everything in page size chunks ensure + * the destination addreses are page aligned. Too many + * special cases crop of when we don't do this. The most + * insidious is getting overlapping destination addresses + * simply because addresses are changed to page size + * granularity. + */ + result = -EADDRNOTAVAIL; + for (i = 0; i < nr_segments; i++) { + unsigned long mstart, mend; + mstart = image->segment[i].mem; + mend = mstart + image->segment[i].memsz; + if ((mstart & ~PAGE_MASK) || (mend & ~PAGE_MASK)) + goto out; + if (mend >= KEXEC_DESTINATION_MEMORY_LIMIT) + goto out; + } + + /* Verify our destination addresses do not overlap. + * If we alloed overlapping destination addresses + * through very weird things can happen with no + * easy explanation as one segment stops on another. + */ + result = -EINVAL; + for(i = 0; i < nr_segments; i++) { + unsigned long mstart, mend; + unsigned long j; + mstart = image->segment[i].mem; + mend = mstart + image->segment[i].memsz; + for(j = 0; j < i; j++) { + unsigned long pstart, pend; + pstart = image->segment[j].mem; + pend = pstart + image->segment[j].memsz; + /* Do the segments overlap ? */ + if ((mend > pstart) && (mstart < pend)) + goto out; + } + } + + /* Ensure our buffer sizes are strictly less than + * our memory sizes. This should always be the case, + * and it is easier to check up front than to be surprised + * later on. + */ + result = -EINVAL; + for(i = 0; i < nr_segments; i++) { + if (image->segment[i].bufsz > image->segment[i].memsz) + goto out; + } + + + result = 0; + out: + if (result == 0) { + *rimage = image; + } else { + kfree(image); + } + return result; + +} + +static int kimage_normal_alloc(struct kimage **rimage, unsigned long entry, + unsigned long nr_segments, struct kexec_segment __user *segments) +{ + int result; + struct kimage *image; + + /* Allocate and initialize a controlling structure */ + image = NULL; + result = do_kimage_alloc(&image, entry, nr_segments, segments); + if (result) { + goto out; + } + *rimage = image; + + /* + * Find a location for the control code buffer, and add it + * the vector of segments so that it's pages will also be + * counted as destination pages. + */ + result = -ENOMEM; + image->control_code_page = kimage_alloc_control_pages(image, + get_order(KEXEC_CONTROL_CODE_SIZE)); + if (!image->control_code_page) { + printk(KERN_ERR "Could not allocate control_code_buffer\n"); + goto out; + } + + result = 0; + out: + if (result == 0) { + *rimage = image; + } else { + kfree(image); + } + return result; +} + +static int kimage_crash_alloc(struct kimage **rimage, unsigned long entry, + unsigned long nr_segments, struct kexec_segment *segments) +{ + int result; + struct kimage *image; + unsigned long i; + + image = NULL; + /* Verify we have a valid entry point */ + if ((entry < crashk_res.start) || (entry > crashk_res.end)) { + result = -EADDRNOTAVAIL; + goto out; + } + + /* Allocate and initialize a controlling structure */ + result = do_kimage_alloc(&image, entry, nr_segments, segments); + if (result) { + goto out; + } + + /* Enable the special crash kernel control page + * allocation policy. + */ + image->control_page = crashk_res.start; + image->type = KEXEC_TYPE_CRASH; + + /* + * Verify we have good destination addresses. Normally + * the caller is responsible for making certain we don't + * attempt to load the new image into invalid or reserved + * areas of RAM. But crash kernels are preloaded into a + * reserved area of ram. We must ensure the addresses + * are in the reserved area otherwise preloading the + * kernel could corrupt things. + */ + result = -EADDRNOTAVAIL; + for (i = 0; i < nr_segments; i++) { + unsigned long mstart, mend; + mstart = image->segment[i].mem; + mend = mstart + image->segment[i].memsz; + /* Ensure we are within the crash kernel limits */ + if ((mstart < crashk_res.start) || (mend > crashk_res.end)) + goto out; + } + + + /* + * Find a location for the control code buffer, and add + * the vector of segments so that it's pages will also be + * counted as destination pages. + */ + result = -ENOMEM; + image->control_code_page = kimage_alloc_control_pages(image, + get_order(KEXEC_CONTROL_CODE_SIZE)); + if (!image->control_code_page) { + printk(KERN_ERR "Could not allocate control_code_buffer\n"); + goto out; + } + + result = 0; + out: + if (result == 0) { + *rimage = image; + } else { + kfree(image); + } + return result; +} + +static int kimage_is_destination_range( + struct kimage *image, unsigned long start, unsigned long end) +{ + unsigned long i; + + for (i = 0; i < image->nr_segments; i++) { + unsigned long mstart, mend; + mstart = image->segment[i].mem; + mend = mstart + image->segment[i].memsz; + if ((end > mstart) && (start < mend)) { + return 1; + } + } + return 0; +} + +static struct page *kimage_alloc_pages(unsigned int gfp_mask, unsigned int order) +{ + struct page *pages; + pages = alloc_pages(gfp_mask, order); + if (pages) { + unsigned int count, i; + pages->mapping = NULL; + pages->private = order; + count = 1 << order; + for(i = 0; i < count; i++) { + SetPageReserved(pages + i); + } + } + return pages; +} + +static void kimage_free_pages(struct page *page) +{ + unsigned int order, count, i; + order = page->private; + count = 1 << order; + for(i = 0; i < count; i++) { + ClearPageReserved(page + i); + } + __free_pages(page, order); +} + +static void kimage_free_page_list(struct list_head *list) +{ + struct list_head *pos, *next; + list_for_each_safe(pos, next, list) { + struct page *page; + + page = list_entry(pos, struct page, lru); + list_del(&page->lru); + + kimage_free_pages(page); + } +} + +static struct page *kimage_alloc_normal_control_pages( + struct kimage *image, unsigned int order) +{ + /* Control pages are special, they are the intermediaries + * that are needed while we copy the rest of the pages + * to their final resting place. As such they must + * not conflict with either the destination addresses + * or memory the kernel is already using. + * + * The only case where we really need more than one of + * these are for architectures where we cannot disable + * the MMU and must instead generate an identity mapped + * page table for all of the memory. + * + * At worst this runs in O(N) of the image size. + */ + struct list_head extra_pages; + struct page *pages; + unsigned int count; + + count = 1 << order; + INIT_LIST_HEAD(&extra_pages); + + /* Loop while I can allocate a page and the page allocated + * is a destination page. + */ + do { + unsigned long pfn, epfn, addr, eaddr; + pages = kimage_alloc_pages(GFP_KERNEL, order); + if (!pages) + break; + pfn = page_to_pfn(pages); + epfn = pfn + count; + addr = pfn << PAGE_SHIFT; + eaddr = epfn << PAGE_SHIFT; + if ((epfn >= (KEXEC_CONTROL_MEMORY_LIMIT >> PAGE_SHIFT)) || + kimage_is_destination_range(image, addr, eaddr)) + { + list_add(&pages->lru, &extra_pages); + pages = NULL; + } + } while(!pages); + if (pages) { + /* Remember the allocated page... */ + list_add(&pages->lru, &image->control_pages); + + /* Because the page is already in it's destination + * location we will never allocate another page at + * that address. Therefore kimage_alloc_pages + * will not return it (again) and we don't need + * to give it an entry in image->segment[]. + */ + } + /* Deal with the destination pages I have inadvertently allocated. + * + * Ideally I would convert multi-page allocations into single + * page allocations, and add everyting to image->dest_pages. + * + * For now it is simpler to just free the pages. + */ + kimage_free_page_list(&extra_pages); + return pages; + +} + +static struct page *kimage_alloc_crash_control_pages( + struct kimage *image, unsigned int order) +{ + /* Control pages are special, they are the intermediaries + * that are needed while we copy the rest of the pages + * to their final resting place. As such they must + * not conflict with either the destination addresses + * or memory the kernel is already using. + * + * Control pages are also the only pags we must allocate + * when loading a crash kernel. All of the other pages + * are specified by the segments and we just memcpy + * into them directly. + * + * The only case where we really need more than one of + * these are for architectures where we cannot disable + * the MMU and must instead generate an identity mapped + * page table for all of the memory. + * + * Given the low demand this implements a very simple + * allocator that finds the first hole of the appropriate + * size in the reserved memory region, and allocates all + * of the memory up to and including the hole. + */ + unsigned long hole_start, hole_end, size; + struct page *pages; + pages = NULL; + size = (1 << order) << PAGE_SHIFT; + hole_start = (image->control_page + (size - 1)) & ~(size - 1); + hole_end = hole_start + size - 1; + while(hole_end <= crashk_res.end) { + unsigned long i; + if (hole_end > KEXEC_CONTROL_MEMORY_LIMIT) { + break; + } + if (hole_end > crashk_res.end) { + break; + } + /* See if I overlap any of the segments */ + for(i = 0; i < image->nr_segments; i++) { + unsigned long mstart, mend; + mstart = image->segment[i].mem; + mend = mstart + image->segment[i].memsz - 1; + if ((hole_end >= mstart) && (hole_start <= mend)) { + /* Advance the hole to the end of the segment */ + hole_start = (mend + (size - 1)) & ~(size - 1); + hole_end = hole_start + size - 1; + break; + } + } + /* If I don't overlap any segments I have found my hole! */ + if (i == image->nr_segments) { + pages = pfn_to_page(hole_start >> PAGE_SHIFT); + break; + } + } + if (pages) { + image->control_page = hole_end; + } + return pages; +} + + +struct page *kimage_alloc_control_pages( + struct kimage *image, unsigned int order) +{ + struct page *pages = NULL; + switch(image->type) { + case KEXEC_TYPE_DEFAULT: + pages = kimage_alloc_normal_control_pages(image, order); + break; + case KEXEC_TYPE_CRASH: + pages = kimage_alloc_crash_control_pages(image, order); + break; + } + return pages; +} + +static int kimage_add_entry(struct kimage *image, kimage_entry_t entry) +{ + if (*image->entry != 0) { + image->entry++; + } + if (image->entry == image->last_entry) { + kimage_entry_t *ind_page; + struct page *page; + page = kimage_alloc_page(image, GFP_KERNEL, KIMAGE_NO_DEST); + if (!page) { + return -ENOMEM; + } + ind_page = page_address(page); + *image->entry = virt_to_phys(ind_page) | IND_INDIRECTION; + image->entry = ind_page; + image->last_entry = + ind_page + ((PAGE_SIZE/sizeof(kimage_entry_t)) - 1); + } + *image->entry = entry; + image->entry++; + *image->entry = 0; + return 0; +} + +static int kimage_set_destination( + struct kimage *image, unsigned long destination) +{ + int result; + + destination &= PAGE_MASK; + result = kimage_add_entry(image, destination | IND_DESTINATION); + if (result == 0) { + image->destination = destination; + } + return result; +} + + +static int kimage_add_page(struct kimage *image, unsigned long page) +{ + int result; + + page &= PAGE_MASK; + result = kimage_add_entry(image, page | IND_SOURCE); + if (result == 0) { + image->destination += PAGE_SIZE; + } + return result; +} + + +static void kimage_free_extra_pages(struct kimage *image) +{ + /* Walk through and free any extra destination pages I may have */ + kimage_free_page_list(&image->dest_pages); + + /* Walk through and free any unuseable pages I have cached */ + kimage_free_page_list(&image->unuseable_pages); + +} +static int kimage_terminate(struct kimage *image) +{ + if (*image->entry != 0) { + image->entry++; + } + *image->entry = IND_DONE; + return 0; +} + +#define for_each_kimage_entry(image, ptr, entry) \ + for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE); \ + ptr = (entry & IND_INDIRECTION)? \ + phys_to_virt((entry & PAGE_MASK)): ptr +1) + +static void kimage_free_entry(kimage_entry_t entry) +{ + struct page *page; + + page = pfn_to_page(entry >> PAGE_SHIFT); + kimage_free_pages(page); +} + +static void kimage_free(struct kimage *image) +{ + kimage_entry_t *ptr, entry; + kimage_entry_t ind = 0; + + if (!image) + return; + kimage_free_extra_pages(image); + for_each_kimage_entry(image, ptr, entry) { + if (entry & IND_INDIRECTION) { + /* Free the previous indirection page */ + if (ind & IND_INDIRECTION) { + kimage_free_entry(ind); + } + /* Save this indirection page until we are + * done with it. + */ + ind = entry; + } + else if (entry & IND_SOURCE) { + kimage_free_entry(entry); + } + } + /* Free the final indirection page */ + if (ind & IND_INDIRECTION) { + kimage_free_entry(ind); + } + + /* Handle any machine specific cleanup */ + machine_kexec_cleanup(image); + + /* Free the kexec control pages... */ + kimage_free_page_list(&image->control_pages); + kfree(image); +} + +static kimage_entry_t *kimage_dst_used(struct kimage *image, unsigned long page) +{ + kimage_entry_t *ptr, entry; + unsigned long destination = 0; + + for_each_kimage_entry(image, ptr, entry) { + if (entry & IND_DESTINATION) { + destination = entry & PAGE_MASK; + } + else if (entry & IND_SOURCE) { + if (page == destination) { + return ptr; + } + destination += PAGE_SIZE; + } + } + return 0; +} + +static struct page *kimage_alloc_page(struct kimage *image, unsigned int gfp_mask, unsigned long destination) +{ + /* + * Here we implement safeguards to ensure that a source page + * is not copied to its destination page before the data on + * the destination page is no longer useful. + * + * To do this we maintain the invariant that a source page is + * either its own destination page, or it is not a + * destination page at all. + * + * That is slightly stronger than required, but the proof + * that no problems will not occur is trivial, and the + * implementation is simply to verify. + * + * When allocating all pages normally this algorithm will run + * in O(N) time, but in the worst case it will run in O(N^2) + * time. If the runtime is a problem the data structures can + * be fixed. + */ + struct page *page; + unsigned long addr; + + /* + * Walk through the list of destination pages, and see if I + * have a match. + */ + list_for_each_entry(page, &image->dest_pages, lru) { + addr = page_to_pfn(page) << PAGE_SHIFT; + if (addr == destination) { + list_del(&page->lru); + return page; + } + } + page = NULL; + while (1) { + kimage_entry_t *old; + + /* Allocate a page, if we run out of memory give up */ + page = kimage_alloc_pages(gfp_mask, 0); + if (!page) { + return 0; + } + /* If the page cannot be used file it away */ + if (page_to_pfn(page) > (KEXEC_SOURCE_MEMORY_LIMIT >> PAGE_SHIFT)) { + list_add(&page->lru, &image->unuseable_pages); + continue; + } + addr = page_to_pfn(page) << PAGE_SHIFT; + + /* If it is the destination page we want use it */ + if (addr == destination) + break; + + /* If the page is not a destination page use it */ + if (!kimage_is_destination_range(image, addr, addr + PAGE_SIZE)) + break; + + /* + * I know that the page is someones destination page. + * See if there is already a source page for this + * destination page. And if so swap the source pages. + */ + old = kimage_dst_used(image, addr); + if (old) { + /* If so move it */ + unsigned long old_addr; + struct page *old_page; + + old_addr = *old & PAGE_MASK; + old_page = pfn_to_page(old_addr >> PAGE_SHIFT); + copy_highpage(page, old_page); + *old = addr | (*old & ~PAGE_MASK); + + /* The old page I have found cannot be a + * destination page, so return it. + */ + addr = old_addr; + page = old_page; + break; + } + else { + /* Place the page on the destination list I + * will use it later. + */ + list_add(&page->lru, &image->dest_pages); + } + } + return page; +} + +static int kimage_load_normal_segment(struct kimage *image, + struct kexec_segment *segment) +{ + unsigned long maddr; + unsigned long ubytes, mbytes; + int result; + unsigned char *buf; + + result = 0; + buf = segment->buf; + ubytes = segment->bufsz; + mbytes = segment->memsz; + maddr = segment->mem; + + result = kimage_set_destination(image, maddr); + if (result < 0) { + goto out; + } + while(mbytes) { + struct page *page; + char *ptr; + size_t uchunk, mchunk; + page = kimage_alloc_page(image, GFP_HIGHUSER, maddr); + if (page == 0) { + result = -ENOMEM; + goto out; + } + result = kimage_add_page(image, page_to_pfn(page) << PAGE_SHIFT); + if (result < 0) { + goto out; + } + ptr = kmap(page); + /* Start with a clear page */ + memset(ptr, 0, PAGE_SIZE); + ptr += maddr & ~PAGE_MASK; + mchunk = PAGE_SIZE - (maddr & ~PAGE_MASK); + if (mchunk > mbytes) { + mchunk = mbytes; + } + uchunk = mchunk; + if (uchunk > ubytes) { + uchunk = ubytes; + } + result = copy_from_user(ptr, buf, uchunk); + kunmap(page); + if (result) { + result = (result < 0) ? result : -EIO; + goto out; + } + ubytes -= uchunk; + maddr += mchunk; + buf += mchunk; + mbytes -= mchunk; + } + out: + return result; +} + +static int kimage_load_crash_segment(struct kimage *image, + struct kexec_segment *segment) +{ + /* For crash dumps kernels we simply copy the data from + * user space to it's destination. + * We do things a page at a time for the sake of kmap. + */ + unsigned long maddr; + unsigned long ubytes, mbytes; + int result; + unsigned char *buf; + + result = 0; + buf = segment->buf; + ubytes = segment->bufsz; + mbytes = segment->memsz; + maddr = segment->mem; + while(mbytes) { + struct page *page; + char *ptr; + size_t uchunk, mchunk; + page = pfn_to_page(maddr >> PAGE_SHIFT); + if (page == 0) { + result = -ENOMEM; + goto out; + } + ptr = kmap(page); + ptr += maddr & ~PAGE_MASK; + mchunk = PAGE_SIZE - (maddr & ~PAGE_MASK); + if (mchunk > mbytes) { + mchunk = mbytes; + } + uchunk = mchunk; + if (uchunk > ubytes) { + uchunk = ubytes; + /* Zero the trailing part of the page */ + memset(ptr + uchunk, 0, mchunk - uchunk); + } + result = copy_from_user(ptr, buf, uchunk); + kunmap(page); + if (result) { + result = (result < 0) ? result : -EIO; + goto out; + } + ubytes -= uchunk; + maddr += mchunk; + buf += mchunk; + mbytes -= mchunk; + } + out: + return result; +} + +static int kimage_load_segment(struct kimage *image, + struct kexec_segment *segment) +{ + int result = -ENOMEM; + switch(image->type) { + case KEXEC_TYPE_DEFAULT: + result = kimage_load_normal_segment(image, segment); + break; + case KEXEC_TYPE_CRASH: + result = kimage_load_crash_segment(image, segment); + break; + } + return result; +} + +/* + * Exec Kernel system call: for obvious reasons only root may call it. + * + * This call breaks up into three pieces. + * - A generic part which loads the new kernel from the current + * address space, and very carefully places the data in the + * allocated pages. + * + * - A generic part that interacts with the kernel and tells all of + * the devices to shut down. Preventing on-going dmas, and placing + * the devices in a consistent state so a later kernel can + * reinitialize them. + * + * - A machine specific part that includes the syscall number + * and the copies the image to it's final destination. And + * jumps into the image at entry. + * + * kexec does not sync, or unmount filesystems so if you need + * that to happen you need to do that yourself. + */ +struct kimage *kexec_image = NULL; +static struct kimage *kexec_crash_image = NULL; +/* + * A home grown binary mutex. + * Nothing can wait so this mutex is safe to use + * in interrupt context :) + */ +static int kexec_lock = 0; + +asmlinkage long sys_kexec_load(unsigned long entry, + unsigned long nr_segments, struct kexec_segment __user *segments, + unsigned long flags) +{ + struct kimage **dest_image, *image; + int locked; + int result; + + /* We only trust the superuser with rebooting the system. */ + if (!capable(CAP_SYS_BOOT)) + return -EPERM; + + /* + * Verify we have a legal set of flags + * This leaves us room for future extensions. + */ + if ((flags & KEXEC_FLAGS) != (flags & ~KEXEC_ARCH_MASK)) + return -EINVAL; + + /* Verify we are on the appropriate architecture */ + if (((flags & KEXEC_ARCH_MASK) != KEXEC_ARCH) && + ((flags & KEXEC_ARCH_MASK) != KEXEC_ARCH_DEFAULT)) + { + return -EINVAL; + } + + /* Put an artificial cap on the number + * of segments passed to kexec_load. + */ + if (nr_segments > KEXEC_SEGMENT_MAX) + return -EINVAL; + + image = NULL; + result = 0; + + /* Because we write directly to the reserved memory + * region when loading crash kernels we need a mutex here to + * prevent multiple crash kernels from attempting to load + * simultaneously, and to prevent a crash kernel from loading + * over the top of a in use crash kernel. + * + * KISS: always take the mutex. + */ + locked = xchg(&kexec_lock, 1); + if (locked) { + return -EBUSY; + } + dest_image = &kexec_image; + if (flags & KEXEC_ON_CRASH) { + dest_image = &kexec_crash_image; + } + if (nr_segments > 0) { + unsigned long i; + /* Loading another kernel to reboot into */ + if ((flags & KEXEC_ON_CRASH) == 0) { + result = kimage_normal_alloc(&image, entry, nr_segments, segments); + } + /* Loading another kernel to switch to if this one crashes */ + else if (flags & KEXEC_ON_CRASH) { + /* Free any current crash dump kernel before + * we corrupt it. + */ + kimage_free(xchg(&kexec_crash_image, NULL)); + result = kimage_crash_alloc(&image, entry, nr_segments, segments); + } + if (result) { + goto out; + } + result = machine_kexec_prepare(image); + if (result) { + goto out; + } + for(i = 0; i < nr_segments; i++) { + result = kimage_load_segment(image, &image->segment[i]); + if (result) { + goto out; + } + } + result = kimage_terminate(image); + if (result) { + goto out; + } + } + /* Install the new kernel, and Uninstall the old */ + image = xchg(dest_image, image); + + out: + xchg(&kexec_lock, 0); /* Release the mutex */ + kimage_free(image); + return result; +} + +#ifdef CONFIG_COMPAT +asmlinkage long compat_sys_kexec_load(unsigned long entry, + unsigned long nr_segments, struct compat_kexec_segment __user *segments, + unsigned long flags) +{ + struct compat_kexec_segment in; + struct kexec_segment out, __user *ksegments; + unsigned long i, result; + + /* Don't allow clients that don't understand the native + * architecture to do anything. + */ + if ((flags & KEXEC_ARCH_MASK) == KEXEC_ARCH_DEFAULT) { + return -EINVAL; + } + + if (nr_segments > KEXEC_SEGMENT_MAX) { + return -EINVAL; + } + + ksegments = compat_alloc_user_space(nr_segments * sizeof(out)); + for (i=0; i < nr_segments; i++) { + result = copy_from_user(&in, &segments[i], sizeof(in)); + if (result) { + return -EFAULT; + } + + out.buf = compat_ptr(in.buf); + out.bufsz = in.bufsz; + out.mem = in.mem; + out.memsz = in.memsz; + + result = copy_to_user(&ksegments[i], &out, sizeof(out)); + if (result) { + return -EFAULT; + } + } + + return sys_kexec_load(entry, nr_segments, ksegments, flags); +} +#endif + +void crash_kexec(void) +{ + struct kimage *image; + int locked; + + + /* Take the kexec_lock here to prevent sys_kexec_load + * running on one cpu from replacing the crash kernel + * we are using after a panic on a different cpu. + * + * If the crash kernel was not located in a fixed area + * of memory the xchg(&kexec_crash_image) would be + * sufficient. But since I reuse the memory... + */ + locked = xchg(&kexec_lock, 1); + if (!locked) { + image = xchg(&kexec_crash_image, NULL); + if (image) { + machine_crash_shutdown(); + machine_kexec(image); + } + xchg(&kexec_lock, 0); + } +} diff --git a/kernel/panic.c b/kernel/panic.c index 081f7465fc8d..66f43d33cd80 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -18,6 +18,7 @@ #include #include #include +#include int panic_timeout; int panic_on_oops; @@ -63,6 +64,13 @@ NORET_TYPE void panic(const char * fmt, ...) unsigned long caller = (unsigned long) __builtin_return_address(0); #endif + /* + * It's possible to come here directly from a panic-assertion and not + * have preempt disabled. Some functions called from here want + * preempt to be disabled. No point enabling it later though... + */ + preempt_disable(); + bust_spinlocks(1); va_start(args, fmt); vsnprintf(buf, sizeof(buf), fmt, args); @@ -70,7 +78,19 @@ NORET_TYPE void panic(const char * fmt, ...) printk(KERN_EMERG "Kernel panic - not syncing: %s\n",buf); bust_spinlocks(0); + /* + * If we have crashed and we have a crash kernel loaded let it handle + * everything else. + * Do we want to call this before we try to display a message? + */ + crash_kexec(); + #ifdef CONFIG_SMP + /* + * Note smp_send_stop is the usual smp shutdown function, which + * unfortunately means it may not be hardened to work in a panic + * situation. + */ smp_send_stop(); #endif @@ -79,8 +99,7 @@ NORET_TYPE void panic(const char * fmt, ...) if (!panic_blink) panic_blink = no_blink; - if (panic_timeout > 0) - { + if (panic_timeout > 0) { /* * Delay timeout seconds before rebooting the machine. * We can't use the "normal" timers since we just panicked.. diff --git a/kernel/sys.c b/kernel/sys.c index dac10161ca23..9a24374c23bc 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include #include #include @@ -439,6 +441,24 @@ asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd, void __user machine_restart(buffer); break; +#ifdef CONFIG_KEXEC + case LINUX_REBOOT_CMD_KEXEC: + { + struct kimage *image; + image = xchg(&kexec_image, 0); + if (!image) { + unlock_kernel(); + return -EINVAL; + } + notifier_call_chain(&reboot_notifier_list, SYS_RESTART, NULL); + system_state = SYSTEM_RESTART; + device_shutdown(); + printk(KERN_EMERG "Starting new kernel\n"); + machine_shutdown(); + machine_kexec(image); + break; + } +#endif #ifdef CONFIG_SOFTWARE_SUSPEND case LINUX_REBOOT_CMD_SW_SUSPEND: { diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c index 6f15bea7d1a8..29196ce9b40f 100644 --- a/kernel/sys_ni.c +++ b/kernel/sys_ni.c @@ -18,6 +18,8 @@ cond_syscall(sys_acct); cond_syscall(sys_lookup_dcookie); cond_syscall(sys_swapon); cond_syscall(sys_swapoff); +cond_syscall(sys_kexec_load); +cond_syscall(compat_sys_kexec_load); cond_syscall(sys_init_module); cond_syscall(sys_delete_module); cond_syscall(sys_socketpair); -- cgit v1.2.3 From 07d46de415fba309a5648f078fdda118d489646b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 25 Jun 2005 14:59:13 -0700 Subject: [PATCH] update Computone MAINTAINERS entry This patch states that Michael still maintains this driver and removes a no longer mailing list. Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'MAINTAINERS') diff --git a/MAINTAINERS b/MAINTAINERS index 81728572799e..3f6f2d645fd4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -576,10 +576,9 @@ S: Supported COMPUTONE INTELLIPORT MULTIPORT CARD P: Michael H. Warfield -M: Michael H. Warfield +M: mhw@wittsend.com W: http://www.wittsend.com/computone.html -L: linux-computone@lazuli.wittsend.com -S: Orphaned +S: Maintained COSA/SRP SYNC SERIAL DRIVER P: Jan "Yenya" Kasprzak -- cgit v1.2.3 From d660a7403a801018dc65208dbcba4463c3038b1f Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 25 Jun 2005 14:59:35 -0700 Subject: [PATCH] MAINTAINERS: document that uclinux-dev@uclinux.org is subscribers-only Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'MAINTAINERS') diff --git a/MAINTAINERS b/MAINTAINERS index 3f6f2d645fd4..a0b0d595d17c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2601,7 +2601,7 @@ M: davidm@snapgear.com P: D. Jeff Dionne (created first uClinux port) M: jeff@uclinux.org W: http://www.uclinux.org/ -L: uclinux-dev@uclinux.org +L: uclinux-dev@uclinux.org (subscribers-only) S: Maintained UCLINUX FOR NEC V850 -- cgit v1.2.3