From e1a9ae45736989c972a8d1c151bc390678ae6205 Mon Sep 17 00:00:00 2001
From: Serge Semin <fancer.lancer@gmail.com>
Date: Sat, 2 Dec 2023 14:14:20 +0300
Subject: mips: Fix max_mapnr being uninitialized on early stages

max_mapnr variable is utilized in the pfn_valid() method in order to
determine the upper PFN space boundary. Having it uninitialized
effectively makes any PFN passed to that method invalid. That in its turn
causes the kernel mm-subsystem occasion malfunctions even after the
max_mapnr variable is actually properly updated. For instance,
pfn_valid() is called in the init_unavailable_range() method in the
framework of the calls-chain on MIPS:
setup_arch()
+-> paging_init()
    +-> free_area_init()
        +-> memmap_init()
            +-> memmap_init_zone_range()
                +-> init_unavailable_range()

Since pfn_valid() always returns "false" value before max_mapnr is
initialized in the mem_init() method, any flatmem page-holes will be left
in the poisoned/uninitialized state including the IO-memory pages. Thus
any further attempts to map/remap the IO-memory by using MMU may fail.
In particular it happened in my case on attempt to map the SRAM region.
The kernel bootup procedure just crashed on the unhandled unaligned access
bug raised in the __update_cache() method:

> Unhandled kernel unaligned access[#1]:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc1-XXX-dirty #2056
> ...
> Call Trace:
> [<8011ef9c>] __update_cache+0x88/0x1bc
> [<80385944>] ioremap_page_range+0x110/0x2a4
> [<80126948>] ioremap_prot+0x17c/0x1f4
> [<80711b80>] __devm_ioremap+0x8c/0x120
> [<80711e0c>] __devm_ioremap_resource+0xf4/0x218
> [<808bf244>] sram_probe+0x4f4/0x930
> [<80889d20>] platform_probe+0x68/0xec
> ...

Let's fix the problem by initializing the max_mapnr variable as soon as
the required data is available. In particular it can be done right in the
paging_init() method before free_area_init() is called since all the PFN
zone boundaries have already been calculated by that time.

Cc: stable@vger.kernel.org
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
---
 arch/mips/mm/init.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

(limited to 'arch/mips/mm')

diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 5dcb525a8995..6e368a4658b5 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -422,7 +422,12 @@ void __init paging_init(void)
 		       (highend_pfn - max_low_pfn) << (PAGE_SHIFT - 10));
 		max_zone_pfns[ZONE_HIGHMEM] = max_low_pfn;
 	}
+
+	max_mapnr = highend_pfn ? highend_pfn : max_low_pfn;
+#else
+	max_mapnr = max_low_pfn;
 #endif
+	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
 
 	free_area_init(max_zone_pfns);
 }
@@ -458,13 +463,6 @@ void __init mem_init(void)
 	 */
 	BUILD_BUG_ON(IS_ENABLED(CONFIG_32BIT) && (PFN_PTE_SHIFT > PAGE_SHIFT));
 
-#ifdef CONFIG_HIGHMEM
-	max_mapnr = highend_pfn ? highend_pfn : max_low_pfn;
-#else
-	max_mapnr = max_low_pfn;
-#endif
-	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
-
 	maar_init();
 	memblock_free_all();
 	setup_zero_pages();	/* Setup zeroed pages.  */
-- 
cgit v1.2.3


From 1c0150229f6a658687c245dfc4dcfa3fae69df49 Mon Sep 17 00:00:00 2001
From: Serge Semin <fancer.lancer@gmail.com>
Date: Sat, 2 Dec 2023 14:14:21 +0300
Subject: mips: Optimize max_mapnr init procedure

max_mapnr defines the upper boundary of the pages space in the system.
Currently in case if HIGHMEM is available it's calculated based on the
upper high memory PFN limit value. Seeing there is a case when it isn't
fully correct let's optimize out the max_mapnr variable initialization
procedure to cover all the handled in the paging_init() method cases:
1. If CPU has DC-aliases, then high memory is unavailable so the PFNs
upper boundary is determined by max_low_pfn.
2. Otherwise if high memory is available, use highend_pfn value
representing the upper high memory PFNs limit.
3. Otherwise no high memory is available so set max_mapnr with the
low-memory upper limit.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
---
 arch/mips/mm/init.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch/mips/mm')

diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 6e368a4658b5..b2dce07116e8 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -421,9 +421,13 @@ void __init paging_init(void)
 		       " %ldk highmem ignored\n",
 		       (highend_pfn - max_low_pfn) << (PAGE_SHIFT - 10));
 		max_zone_pfns[ZONE_HIGHMEM] = max_low_pfn;
-	}
 
-	max_mapnr = highend_pfn ? highend_pfn : max_low_pfn;
+		max_mapnr = max_low_pfn;
+	} else if (highend_pfn) {
+		max_mapnr = highend_pfn;
+	} else {
+		max_mapnr = max_low_pfn;
+	}
 #else
 	max_mapnr = max_low_pfn;
 #endif
-- 
cgit v1.2.3


From e540b8c5da04c66ff610d3bf84a7566d9f6bffcf Mon Sep 17 00:00:00 2001
From: Serge Semin <fancer.lancer@gmail.com>
Date: Sat, 2 Dec 2023 14:14:22 +0300
Subject: mips: mm: add slab availability checking in ioremap_prot

Recent commit a5f616483110 ("mm/ioremap: add slab availability checking in
ioremap_prot") added the slab availability check to the generic
ioremap_prot() implementation. It is reasonable to be done for the
MIPS32-specific method too since it also relies on the
get_vm_area_caller() function (by means of get_vm_area()) which requires
the slab allocator being up and running before being called.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
---
 arch/mips/mm/ioremap.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/mips/mm')

diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index b6dad2fd5575..d8243d61ef32 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -72,6 +72,10 @@ void __iomem *ioremap_prot(phys_addr_t phys_addr, unsigned long size,
 	    flags == _CACHE_UNCACHED)
 		return (void __iomem *) CKSEG1ADDR(phys_addr);
 
+	/* Early remaps should use the unmapped regions til' VM is available */
+	if (WARN_ON_ONCE(!slab_is_available()))
+		return NULL;
+
 	/*
 	 * Don't allow anybody to remap RAM that may be allocated by the page
 	 * allocator, since that could lead to races & data clobbering.
-- 
cgit v1.2.3


From 2f9060b1db4aa2c21c248e34476d8936a2b69cf6 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bhelgaas@google.com>
Date: Wed, 3 Jan 2024 17:16:03 -0600
Subject: MIPS: Fix typos

Fix typos, most reported by "codespell arch/mips".  Only touches comments,
no code changes.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-mips@vger.kernel.org
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
---
 arch/mips/bcm47xx/buttons.c                            | 6 +++---
 arch/mips/bcm63xx/clk.c                                | 4 ++--
 arch/mips/boot/compressed/dbg.c                        | 2 +-
 arch/mips/boot/elf2ecoff.c                             | 2 +-
 arch/mips/cavium-octeon/csrc-octeon.c                  | 2 +-
 arch/mips/cavium-octeon/executive/cvmx-boot-vector.c   | 2 +-
 arch/mips/cavium-octeon/executive/cvmx-bootmem.c       | 2 +-
 arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c     | 4 ++--
 arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c   | 2 +-
 arch/mips/cavium-octeon/executive/cvmx-pko.c           | 2 +-
 arch/mips/cavium-octeon/octeon-platform.c              | 2 +-
 arch/mips/fw/arc/promlib.c                             | 6 +++---
 arch/mips/include/asm/debug.h                          | 2 +-
 arch/mips/include/asm/io.h                             | 4 ++--
 arch/mips/include/asm/mach-au1x00/au1000_dma.h         | 2 +-
 arch/mips/include/asm/mach-au1x00/gpio-au1000.h        | 2 +-
 arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h  | 2 +-
 arch/mips/include/asm/mach-loongson64/loongson_hwmon.h | 2 +-
 arch/mips/include/asm/mach-loongson64/loongson_regs.h  | 2 +-
 arch/mips/include/asm/mach-malta/spaces.h              | 4 ++--
 arch/mips/include/asm/mips-boards/bonito64.h           | 2 +-
 arch/mips/include/asm/mips-cpc.h                       | 2 +-
 arch/mips/include/asm/mipsregs.h                       | 4 ++--
 arch/mips/include/asm/octeon/cvmx-bootinfo.h           | 2 +-
 arch/mips/include/asm/octeon/cvmx-cmd-queue.h          | 6 +++---
 arch/mips/include/asm/octeon/cvmx-pko.h                | 2 +-
 arch/mips/include/asm/octeon/cvmx-pow.h                | 4 ++--
 arch/mips/include/asm/octeon/octeon-model.h            | 4 ++--
 arch/mips/include/asm/page.h                           | 2 +-
 arch/mips/include/asm/pci.h                            | 2 +-
 arch/mips/include/asm/pgtable-bits.h                   | 2 +-
 arch/mips/include/asm/sgi/mc.h                         | 2 +-
 arch/mips/include/asm/sn/klconfig.h                    | 2 +-
 arch/mips/include/asm/sync.h                           | 2 +-
 arch/mips/include/asm/thread_info.h                    | 2 +-
 arch/mips/include/asm/timex.h                          | 2 +-
 arch/mips/include/asm/vdso/vdso.h                      | 2 +-
 arch/mips/include/uapi/asm/mman.h                      | 2 +-
 arch/mips/include/uapi/asm/msgbuf.h                    | 2 +-
 arch/mips/kernel/cpu-probe.c                           | 2 +-
 arch/mips/kernel/kprobes.c                             | 2 +-
 arch/mips/kernel/relocate.c                            | 2 +-
 arch/mips/kernel/relocate_kernel.S                     | 2 +-
 arch/mips/kernel/setup.c                               | 2 +-
 arch/mips/kernel/signal.c                              | 2 +-
 arch/mips/kernel/traps.c                               | 2 +-
 arch/mips/kernel/vpe.c                                 | 4 ++--
 arch/mips/kvm/emulate.c                                | 2 +-
 arch/mips/loongson2ef/common/platform.c                | 2 +-
 arch/mips/loongson64/smp.c                             | 2 +-
 arch/mips/mm/c-r4k.c                                   | 2 +-
 arch/mips/mm/cex-gen.S                                 | 2 +-
 arch/mips/mm/tlb-r3k.c                                 | 2 +-
 arch/mips/mm/tlb-r4k.c                                 | 2 +-
 arch/mips/mm/tlbex.c                                   | 4 ++--
 arch/mips/net/bpf_jit_comp32.c                         | 2 +-
 arch/mips/pci/ops-loongson2.c                          | 2 +-
 arch/mips/pci/pci-alchemy.c                            | 2 +-
 arch/mips/pci/pci-ar2315.c                             | 2 +-
 arch/mips/pci/pci-lantiq.c                             | 2 +-
 arch/mips/pci/pci-octeon.c                             | 2 +-
 arch/mips/pci/pci-xtalk-bridge.c                       | 2 +-
 arch/mips/pci/pcie-octeon.c                            | 2 +-
 arch/mips/ralink/mt7621.c                              | 2 +-
 arch/mips/txx9/generic/pci.c                           | 2 +-
 65 files changed, 80 insertions(+), 80 deletions(-)

(limited to 'arch/mips/mm')

diff --git a/arch/mips/bcm47xx/buttons.c b/arch/mips/bcm47xx/buttons.c
index 437a737c01dd..46994f9bb821 100644
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -147,21 +147,21 @@ static const struct gpio_keys_button
 bcm47xx_buttons_buffalo_whr_g125[] __initconst = {
 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
-	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode switch */
 };
 
 static const struct gpio_keys_button
 bcm47xx_buttons_buffalo_whr_g54s[] __initconst = {
 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
 	BCM47XX_GPIO_KEY_H(4, KEY_RESTART),
-	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode switch */
 };
 
 static const struct gpio_keys_button
 bcm47xx_buttons_buffalo_whr_hp_g54[] __initconst = {
 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
-	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode switch */
 };
 
 static const struct gpio_keys_button
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 86a6e2590866..3144965fb7dc 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -174,7 +174,7 @@ static void enetsw_set(struct clk *clk, int enable)
 	}
 
 	if (enable) {
-		/* reset switch core afer clock change */
+		/* reset switch core after clock change */
 		bcm63xx_core_set_reset(BCM63XX_RESET_ENETSW, 1);
 		msleep(10);
 		bcm63xx_core_set_reset(BCM63XX_RESET_ENETSW, 0);
@@ -304,7 +304,7 @@ static void xtm_set(struct clk *clk, int enable)
 	bcm_hwclock_set(CKCTL_6368_SAR_EN, enable);
 
 	if (enable) {
-		/* reset sar core afer clock change */
+		/* reset sar core after clock change */
 		bcm63xx_core_set_reset(BCM63XX_RESET_SAR, 1);
 		mdelay(1);
 		bcm63xx_core_set_reset(BCM63XX_RESET_SAR, 0);
diff --git a/arch/mips/boot/compressed/dbg.c b/arch/mips/boot/compressed/dbg.c
index f6728a8fd1c3..98dfb2e59dfe 100644
--- a/arch/mips/boot/compressed/dbg.c
+++ b/arch/mips/boot/compressed/dbg.c
@@ -3,7 +3,7 @@
  * MIPS-specific debug support for pre-boot environment
  *
  * NOTE: putc() is board specific, if your board have a 16550 compatible uart,
- * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you
+ * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. otherwise, you
  * need to implement your own putc().
  */
 #include <linux/compiler.h>
diff --git a/arch/mips/boot/elf2ecoff.c b/arch/mips/boot/elf2ecoff.c
index 6972b97235da..549c5d6ef6d7 100644
--- a/arch/mips/boot/elf2ecoff.c
+++ b/arch/mips/boot/elf2ecoff.c
@@ -443,7 +443,7 @@ int main(int argc, char *argv[])
 	efh.f_symptr = 0;
 	efh.f_nsyms = 0;
 	efh.f_opthdr = sizeof eah;
-	efh.f_flags = 0x100f;	/* Stripped, not sharable. */
+	efh.f_flags = 0x100f;	/* Stripped, not shareable. */
 
 	memset(esecs, 0, sizeof esecs);
 	strcpy(esecs[0].s_name, ".text");
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 124817609ce0..af62a210a40b 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -113,7 +113,7 @@ static struct clocksource clocksource_mips = {
 
 unsigned long long notrace sched_clock(void)
 {
-	/* 64-bit arithmatic can overflow, so use 128-bit.  */
+	/* 64-bit arithmetic can overflow, so use 128-bit.  */
 	u64 t1, t2, t3;
 	unsigned long long rv;
 	u64 mult = clocksource_mips.mult;
diff --git a/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c b/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c
index b7019d21808e..76446db66def 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c
@@ -143,7 +143,7 @@ static void cvmx_boot_vector_init(void *mem)
 		uint64_t v = _cvmx_bootvector_data[i];
 
 		if (OCTEON_IS_OCTEON1PLUS() && (i == 0 || i == 7))
-			v &= 0xffffffff00000000ull; /* KScratch not availble. */
+			v &= 0xffffffff00000000ull; /* KScratch not available */
 		cvmx_write_csr(CVMX_MIO_BOOT_LOC_ADR, i * 8);
 		cvmx_write_csr(CVMX_MIO_BOOT_LOC_DAT, v);
 	}
diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
index 334bf8e577e5..628ebdf4b9c5 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
@@ -264,7 +264,7 @@ int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min,
 	 * Convert !0 address_min and 0 address_max to special case of
 	 * range that specifies an exact memory block to allocate.  Do
 	 * this before other checks and adjustments so that this
-	 * tranformation will be validated.
+	 * transformation will be validated.
 	 */
 	if (address_min && !address_max)
 		address_max = address_min + req_size;
diff --git a/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c
index aa7bbf8d0df5..042a6bc44b5c 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c
@@ -192,7 +192,7 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id,
 }
 
 /*
- * Shutdown a queue a free it's command buffers to the FPA. The
+ * Shutdown a queue and free its command buffers to the FPA. The
  * hardware connected to the queue must be stopped before this
  * function is called.
  *
@@ -285,7 +285,7 @@ int cvmx_cmd_queue_length(cvmx_cmd_queue_id_t queue_id)
 
 /*
  * Return the command buffer to be written to. The purpose of this
- * function is to allow CVMX routine access t othe low level buffer
+ * function is to allow CVMX routine access to the low level buffer
  * for initial hardware setup. User applications should not call this
  * function directly.
  *
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
index 607b4e659579..1fceb7fd2c94 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
@@ -103,7 +103,7 @@ uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data)
 /**
  * Shift long sequences of zeros into the QLM JTAG chain. It is
  * common to need to shift more than 32 bits of zeros into the
- * chain. This function is a convience wrapper around
+ * chain. This function is a convenience wrapper around
  * cvmx_helper_qlm_jtag_shift() to shift more than 32 bits of
  * zeros at a time.
  *
diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c
index 15faca494c80..6e70b859a0ac 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-pko.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c
@@ -615,7 +615,7 @@ int cvmx_pko_rate_limit_bits(int port, uint64_t bits_s, int burst)
 	/*
 	 * Each packet has a 12 bytes of interframe gap, an 8 byte
 	 * preamble, and a 4 byte CRC. These are not included in the
-	 * per word count. Multiply by 8 to covert to bits and divide
+	 * per word count. Multiply by 8 to convert to bits and divide
 	 * by 256 for limit granularity.
 	 */
 	pko_mem_port_rate0.s.rate_pkt = (12 + 8 + 4) * 8 * tokens_per_bit / 256;
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index f76783c24338..5e1dd4e6e82f 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -973,7 +973,7 @@ int __init octeon_prune_device_tree(void)
 			 * zero.
 			 */
 
-			/* Asume that CS1 immediately follows. */
+			/* Assume that CS1 immediately follows. */
 			mio_boot_reg_cfg.u64 =
 				cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs + 1));
 			region1_base = mio_boot_reg_cfg.s.base << 16;
diff --git a/arch/mips/fw/arc/promlib.c b/arch/mips/fw/arc/promlib.c
index 5e9e840a9314..93e1e70393ee 100644
--- a/arch/mips/fw/arc/promlib.c
+++ b/arch/mips/fw/arc/promlib.c
@@ -15,11 +15,11 @@
 /*
  * For 64bit kernels working with a 32bit ARC PROM pointer arguments
  * for ARC calls need to reside in CKEG0/1. But as soon as the kernel
- * switches to it's first kernel thread stack is set to an address in
+ * switches to its first kernel thread stack is set to an address in
  * XKPHYS, so anything on stack can't be used anymore. This is solved
- * by using a * static declartion variables are put into BSS, which is
+ * by using a * static declaration variables are put into BSS, which is
  * linked to a CKSEG0 address. Since this is only used on UP platforms
- * there is not spinlock needed
+ * there is no spinlock needed
  */
 #define O32_STATIC	static
 #else
diff --git a/arch/mips/include/asm/debug.h b/arch/mips/include/asm/debug.h
index c7013e1cb53f..e70392429246 100644
--- a/arch/mips/include/asm/debug.h
+++ b/arch/mips/include/asm/debug.h
@@ -10,7 +10,7 @@
 
 /*
  * mips_debugfs_dir corresponds to the "mips" directory at the top level
- * of the DebugFS hierarchy. MIPS-specific DebugFS entires should be
+ * of the DebugFS hierarchy. MIPS-specific DebugFS entries should be
  * placed beneath this directory.
  */
 extern struct dentry *mips_debugfs_dir;
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 062dd4e6b954..bba327dc1226 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -179,7 +179,7 @@ void iounmap(const volatile void __iomem *addr);
  * address is not guaranteed to be usable directly as a virtual
  * address.
  *
- * This version of ioremap ensures that the memory is marked cachable by
+ * This version of ioremap ensures that the memory is marked cacheable by
  * the CPU.  Also enables full write-combining.	 Useful for some
  * memory-like regions on I/O busses.
  */
@@ -197,7 +197,7 @@ void iounmap(const volatile void __iomem *addr);
  * address is not guaranteed to be usable directly as a virtual
  * address.
  *
- * This version of ioremap ensures that the memory is marked uncachable
+ * This version of ioremap ensures that the memory is marked uncacheable
  * but accelerated by means of write-combining feature. It is specifically
  * useful for PCIe prefetchable windows, which may vastly improve a
  * communications performance. If it was determined on boot stage, what
diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
index 0a0cd4270c6f..b82e513c8523 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000_dma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
@@ -259,7 +259,7 @@ static inline void set_dma_mode(unsigned int dmanr, unsigned int mode)
 	if (!chan)
 		return;
 	/*
-	 * set_dma_mode is only allowed to change endianess, direction,
+	 * set_dma_mode is only allowed to change endianness, direction,
 	 * transfer size, device FIFO width, and coherency settings.
 	 * Make sure anything else is masked off.
 	 */
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 82bc2766e2ec..d820b481ac56 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -435,7 +435,7 @@ static inline void alchemy_gpio2_disable_int(int gpio2)
 /**
  * alchemy_gpio2_enable -  Activate GPIO2 block.
  *
- * The GPIO2 block must be enabled excplicitly to work.	 On systems
+ * The GPIO2 block must be enabled explicitly to work.	 On systems
  * where this isn't done by the bootloader, this macro can be used.
  */
 static inline void alchemy_gpio2_enable(void)
diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
index 5855ba1bd1ec..40eaa72e54d0 100644
--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
@@ -55,7 +55,7 @@ extern __iomem void *ltq_sys1_membase;
 #define ltq_sys1_w32_mask(clear, set, reg)   \
 	ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg)
 
-/* allow the gpio and pinctrl drivers to talk to eachother */
+/* allow the gpio and pinctrl drivers to talk to each other */
 extern int pinctrl_falcon_get_range_size(int id);
 extern void pinctrl_falcon_add_gpio_range(struct pinctrl_gpio_range *range);
 
diff --git a/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h b/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h
index 545f91f2ae16..721eafc4644e 100644
--- a/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h
@@ -42,7 +42,7 @@ struct loongson_fan_policy {
 	/* period between two check. (Unit: S) */
 	u8	adjust_period;
 
-	/* fan adjust usually depend on a temprature input */
+	/* fan adjust usually depend on a temperature input */
 	get_temp_fun	depend_temp;
 
 	/* up_step/down_step used when type is STEP_SPEED_POLICY */
diff --git a/arch/mips/include/asm/mach-loongson64/loongson_regs.h b/arch/mips/include/asm/mach-loongson64/loongson_regs.h
index b5be7511f6cd..fec767507604 100644
--- a/arch/mips/include/asm/mach-loongson64/loongson_regs.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson_regs.h
@@ -227,7 +227,7 @@ static inline void csr_writeq(u64 val, u32 reg)
 #define LOONGSON_CSR_NODECNT	0x408
 #define LOONGSON_CSR_CPUTEMP	0x428
 
-/* PerCore CSR, only accessable by local cores */
+/* PerCore CSR, only accessible by local cores */
 #define LOONGSON_CSR_IPI_STATUS	0x1000
 #define LOONGSON_CSR_IPI_EN	0x1004
 #define LOONGSON_CSR_IPI_SET	0x1008
diff --git a/arch/mips/include/asm/mach-malta/spaces.h b/arch/mips/include/asm/mach-malta/spaces.h
index d7e54971ec66..1ce4ba97852f 100644
--- a/arch/mips/include/asm/mach-malta/spaces.h
+++ b/arch/mips/include/asm/mach-malta/spaces.h
@@ -23,13 +23,13 @@
  * The kernel is still located in 0x80000000(kseg0). However,
  * the physical mask has been shifted to 0x80000000 which exploits the alias
  * on the Malta board. As a result of which, we override the __pa_symbol
- * to peform direct mapping from virtual to physical addresses. In other
+ * to perform direct mapping from virtual to physical addresses. In other
  * words, the 0x80000000 virtual address maps to 0x80000000 physical address
  * which in turn aliases to 0x0. We do this in order to be able to use a flat
  * 2GB of memory (0x80000000 - 0xffffffff) so we can avoid the I/O hole in
  * 0x10000000 - 0x1fffffff.
  * The last 64KB of physical memory are reserved for correct HIGHMEM
- * macros arithmetics.
+ * macros arithmetic.
  *
  */
 
diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h
index 5368891d424b..31a31fe78d77 100644
--- a/arch/mips/include/asm/mips-boards/bonito64.h
+++ b/arch/mips/include/asm/mips-boards/bonito64.h
@@ -16,7 +16,7 @@
  */
 
 /* Revision 1.48 autogenerated on 08/17/99 15:20:01 */
-/* This bonito64 version editted from bonito.h Revision 1.48 on 11/09/00 */
+/* This bonito64 version edited from bonito.h Revision 1.48 on 11/09/00 */
 
 #ifndef _ASM_MIPS_BOARDS_BONITO64_H
 #define _ASM_MIPS_BOARDS_BONITO64_H
diff --git a/arch/mips/include/asm/mips-cpc.h b/arch/mips/include/asm/mips-cpc.h
index b54453f1648c..5f3a7a9f42bf 100644
--- a/arch/mips/include/asm/mips-cpc.h
+++ b/arch/mips/include/asm/mips-cpc.h
@@ -22,7 +22,7 @@ extern void __iomem *mips_cpc_base;
  *                              the CPC
  *
  * Returns the default physical base address of the Cluster Power Controller
- * memory mapped registers. This is platform dependant & must therefore be
+ * memory mapped registers. This is platform dependent & must therefore be
  * implemented per-platform.
  */
 extern phys_addr_t mips_cpc_default_phys_base(void);
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 2d53704d9f24..ec58cb76d076 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -98,7 +98,7 @@
 
 /*
  * R4640/R4650 cp0 register names.  These registers are listed
- * here only for completeness; without MMU these CPUs are not useable
+ * here only for completeness; without MMU these CPUs are not usable
  * by Linux.  A future ELKS port might take make Linux run on them
  * though ...
  */
@@ -461,7 +461,7 @@
 #define EXCCODE_THREAD		25	/* Thread exceptions (MT) */
 #define EXCCODE_DSPDIS		26	/* DSP disabled exception */
 #define EXCCODE_GE		27	/* Virtualized guest exception (VZ) */
-#define EXCCODE_CACHEERR	30	/* Parity/ECC occured on a core */
+#define EXCCODE_CACHEERR	30	/* Parity/ECC occurred on a core */
 
 /* Implementation specific trap codes used by MIPS cores */
 #define MIPS_EXCCODE_TLBPAR	16	/* TLB parity error exception */
diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
index c1c0b3230e0a..028bf1d6daee 100644
--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
@@ -114,7 +114,7 @@ struct cvmx_bootinfo {
 
 	/*
 	 * flags indicating various configuration options.  These
-	 * flags supercede the 'flags' variable and should be used
+	 * flags supersede the 'flags' variable and should be used
 	 * instead if available.
 	 */
 	uint32_t config_flags;
diff --git a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
index a07a36f7d814..67e1b2162b19 100644
--- a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
+++ b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
@@ -145,7 +145,7 @@ typedef struct {
 /**
  * This structure contains the global state of all command queues.
  * It is stored in a bootmem named block and shared by all
- * applications running on Octeon. Tickets are stored in a differnet
+ * applications running on Octeon. Tickets are stored in a different
  * cache line that queue information to reduce the contention on the
  * ll/sc used to get a ticket. If this is not the case, the update
  * of queue state causes the ll/sc to fail quite often.
@@ -172,7 +172,7 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id,
 						  int pool_size);
 
 /**
- * Shutdown a queue a free it's command buffers to the FPA. The
+ * Shutdown a queue and free its command buffers to the FPA. The
  * hardware connected to the queue must be stopped before this
  * function is called.
  *
@@ -194,7 +194,7 @@ int cvmx_cmd_queue_length(cvmx_cmd_queue_id_t queue_id);
 
 /**
  * Return the command buffer to be written to. The purpose of this
- * function is to allow CVMX routine access t othe low level buffer
+ * function is to allow CVMX routine access to the low level buffer
  * for initial hardware setup. User applications should not call this
  * function directly.
  *
diff --git a/arch/mips/include/asm/octeon/cvmx-pko.h b/arch/mips/include/asm/octeon/cvmx-pko.h
index 5fec8476e421..f18a7f24daf8 100644
--- a/arch/mips/include/asm/octeon/cvmx-pko.h
+++ b/arch/mips/include/asm/octeon/cvmx-pko.h
@@ -91,7 +91,7 @@ typedef enum {
 } cvmx_pko_status_t;
 
 /**
- * This enumeration represents the differnet locking modes supported by PKO.
+ * This enumeration represents the different locking modes supported by PKO.
  */
 typedef enum {
 	/*
diff --git a/arch/mips/include/asm/octeon/cvmx-pow.h b/arch/mips/include/asm/octeon/cvmx-pow.h
index a3b23811e0c3..21b4378244fa 100644
--- a/arch/mips/include/asm/octeon/cvmx-pow.h
+++ b/arch/mips/include/asm/octeon/cvmx-pow.h
@@ -1342,7 +1342,7 @@ static inline void cvmx_pow_tag_sw_wait(void)
  * This function does NOT wait for previous tag switches to complete,
  * so the caller must ensure that there is not a pending tag switch.
  *
- * @wait:   When set, call stalls until work becomes avaiable, or times out.
+ * @wait:   When set, call stalls until work becomes available, or times out.
  *		 If not set, returns immediately.
  *
  * Returns: the WQE pointer from POW. Returns NULL if no work
@@ -1376,7 +1376,7 @@ static inline struct cvmx_wqe *cvmx_pow_work_request_sync_nocheck(cvmx_pow_wait_
  * This function waits for any previous tag switch to complete before
  * requesting the new work.
  *
- * @wait:   When set, call stalls until work becomes avaiable, or times out.
+ * @wait:   When set, call stalls until work becomes available, or times out.
  *		 If not set, returns immediately.
  *
  * Returns: the WQE pointer from POW. Returns NULL if no work
diff --git a/arch/mips/include/asm/octeon/octeon-model.h b/arch/mips/include/asm/octeon/octeon-model.h
index 6c68517c2770..e53b61a8e32f 100644
--- a/arch/mips/include/asm/octeon/octeon-model.h
+++ b/arch/mips/include/asm/octeon/octeon-model.h
@@ -54,7 +54,7 @@
 #define OM_CHECK_SUBMODEL	  0x02000000
 /* Match all models previous than the one specified */
 #define OM_MATCH_PREVIOUS_MODELS  0x04000000
-/* Ignores the minor revison on newer parts */
+/* Ignores the minor revision on newer parts */
 #define OM_IGNORE_MINOR_REVISION  0x08000000
 #define OM_FLAG_MASK		  0xff000000
 
@@ -226,7 +226,7 @@
 #define OCTEON_CN52XX_PASS2	OCTEON_CN52XX_PASS2_X
 
 /*
- * CN3XXX models with old revision enconding
+ * CN3XXX models with old revision encoding
  */
 #define OCTEON_CN38XX_PASS1	0x000d0000
 #define OCTEON_CN38XX_PASS2	0x000d0001
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index 5978a8dfb917..ef9585d96f6b 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -173,7 +173,7 @@ static inline unsigned long ___pa(unsigned long x)
 	if (IS_ENABLED(CONFIG_64BIT)) {
 		/*
 		 * For MIPS64 the virtual address may either be in one of
-		 * the compatibility segements ckseg0 or ckseg1, or it may
+		 * the compatibility segments ckseg0 or ckseg1, or it may
 		 * be in xkphys.
 		 */
 		return x < CKSEG0 ? XPHYSADDR(x) : CPHYSADDR(x);
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 3fd6e22c108b..d993df6302dc 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -23,7 +23,7 @@
 #ifdef CONFIG_PCI_DRIVERS_LEGACY
 
 /*
- * Each pci channel is a top-level PCI bus seem by CPU.	 A machine  with
+ * Each PCI channel is a top-level PCI bus seem by CPU.	 A machine with
  * multiple PCI channels may have multiple PCI host controllers or a
  * single controller supporting multiple channels.
  */
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index 421e78c30253..088623ba7b8b 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -201,7 +201,7 @@ enum pgtable_bits {
  * The final layouts of the PTE bits are:
  *
  *   64-bit, R1 or earlier:     CCC D V G [S H] M A W R P
- *   32-bit, R1 or earler:      CCC D V G M A W R P
+ *   32-bit, R1 or earlier:     CCC D V G M A W R P
  *   64-bit, R2 or later:       CCC D V G RI/R XI [S H] M A W P
  *   32-bit, R2 or later:       CCC D V G RI/R XI M A W P
  */
diff --git a/arch/mips/include/asm/sgi/mc.h b/arch/mips/include/asm/sgi/mc.h
index 3a070cec97e7..5e96f9d32624 100644
--- a/arch/mips/include/asm/sgi/mc.h
+++ b/arch/mips/include/asm/sgi/mc.h
@@ -96,7 +96,7 @@ struct sgimc_regs {
 	volatile u32 lbursttp;	/* Time period for long bursts */
 
 	/* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must
-	 * be the same size. The size encoding for supported SIMMs is bellow */
+	 * be the same size. The size encoding for supported SIMMs is below */
 	u32 _unused11[9];
 	volatile u32 mconfig0;	/* Memory config register zero */
 	u32 _unused12;
diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h
index 117f85e4bef5..3d1670b3e052 100644
--- a/arch/mips/include/asm/sn/klconfig.h
+++ b/arch/mips/include/asm/sn/klconfig.h
@@ -851,7 +851,7 @@ typedef union kldev_s {	     /* for device structure allocation */
 /*
  * TBD - Allocation issues.
  *
- * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component,
+ * Do we need to Mark off separate heaps for lboard_t, rboard_t, component,
  * errinfo and allocate from them, or have a single heap and allocate all
  * structures from it. Debug is easier in the former method since we can
  * dump all similar structs in one command, but there will be lots of holes,
diff --git a/arch/mips/include/asm/sync.h b/arch/mips/include/asm/sync.h
index aabd097933fe..44c04a82d0b7 100644
--- a/arch/mips/include/asm/sync.h
+++ b/arch/mips/include/asm/sync.h
@@ -19,7 +19,7 @@
  *
  * Ordering barriers can be more efficient than completion barriers, since:
  *
- *   a) Ordering barriers only require memory access instructions which preceed
+ *   a) Ordering barriers only require memory access instructions which precede
  *      them in program order (older instructions) to reach a point in the
  *      load/store datapath beyond which reordering is not possible before
  *      allowing memory access instructions which follow them (younger
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index ecae7470faa4..b9d76e8ac5a2 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -27,7 +27,7 @@ struct thread_info {
 	unsigned long		flags;		/* low level flags */
 	unsigned long		tp_value;	/* thread pointer */
 	__u32			cpu;		/* current CPU */
-	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	int			preempt_count;	/* 0 => preemptible, <0 => BUG */
 	struct pt_regs		*regs;
 	long			syscall;	/* syscall number */
 };
diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h
index 2e107886f97a..7ef06dcdc46e 100644
--- a/arch/mips/include/asm/timex.h
+++ b/arch/mips/include/asm/timex.h
@@ -46,7 +46,7 @@ typedef unsigned int cycles_t;
  *
  * There is a suggested workaround and also the erratum can't strike if
  * the compare interrupt isn't being used as the clock source device.
- * However for now the implementaton of this function doesn't get these
+ * However for now the implementation of this function doesn't get these
  * fine details right.
  */
 static inline int can_use_mips_counter(unsigned int prid)
diff --git a/arch/mips/include/asm/vdso/vdso.h b/arch/mips/include/asm/vdso/vdso.h
index a327ca21270e..6cd88191fefa 100644
--- a/arch/mips/include/asm/vdso/vdso.h
+++ b/arch/mips/include/asm/vdso/vdso.h
@@ -32,7 +32,7 @@ static inline unsigned long get_vdso_base(void)
 #else
 	/*
 	 * Get the base load address of the VDSO. We have to avoid generating
-	 * relocations and references to the GOT because ld.so does not peform
+	 * relocations and references to the GOT because ld.so does not perform
 	 * relocations on the VDSO. We use the current offset from the VDSO base
 	 * and perform a PC-relative branch which gives the absolute address in
 	 * ra, and take the difference. The assembler chokes on
diff --git a/arch/mips/include/uapi/asm/mman.h b/arch/mips/include/uapi/asm/mman.h
index c6e1fc77c996..9c48d9a21aa0 100644
--- a/arch/mips/include/uapi/asm/mman.h
+++ b/arch/mips/include/uapi/asm/mman.h
@@ -88,7 +88,7 @@
 #define MADV_HUGEPAGE	14		/* Worth backing with hugepages */
 #define MADV_NOHUGEPAGE 15		/* Not worth backing with hugepages */
 
-#define MADV_DONTDUMP	16		/* Explicity exclude from the core dump,
+#define MADV_DONTDUMP	16		/* Explicitly exclude from core dump,
 					   overrides the coredump filter bits */
 #define MADV_DODUMP	17		/* Clear the MADV_NODUMP flag */
 
diff --git a/arch/mips/include/uapi/asm/msgbuf.h b/arch/mips/include/uapi/asm/msgbuf.h
index 128af72f2dfe..d546642fc67e 100644
--- a/arch/mips/include/uapi/asm/msgbuf.h
+++ b/arch/mips/include/uapi/asm/msgbuf.h
@@ -62,7 +62,7 @@ struct msqid64_ds {
 	unsigned long  __unused5;
 };
 #else
-#warning no endianess set
+#warning no endianness set
 #endif
 
 #endif /* _ASM_MSGBUF_H */
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index b406d8bfb15a..2f4fafdc5fcc 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1139,7 +1139,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		 * This processor doesn't have an MMU, so it's not
 		 * "real easy" to run Linux on it. It is left purely
 		 * for documentation.  Commented out because it shares
-		 * it's c0_prid id number with the TX3900.
+		 * its c0_prid id number with the TX3900.
 		 */
 		c->cputype = CPU_R4650;
 		__cpu_name[cpu] = "R4650";
diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
index 316b27d0d2fb..dc39f5b3fb83 100644
--- a/arch/mips/kernel/kprobes.c
+++ b/arch/mips/kernel/kprobes.c
@@ -55,7 +55,7 @@ NOKPROBE_SYMBOL(insn_has_delayslot);
  * one; putting breakpoint on top of atomic ll/sc pair is bad idea;
  * so we need to prevent it and refuse kprobes insertion for such
  * instructions; cannot do much about breakpoint in the middle of
- * ll/sc pair; it is upto user to avoid those places
+ * ll/sc pair; it is up to user to avoid those places
  */
 static int insn_has_ll_or_sc(union mips_instruction insn)
 {
diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c
index 58fc8d089402..7eeeaf1ff95d 100644
--- a/arch/mips/kernel/relocate.c
+++ b/arch/mips/kernel/relocate.c
@@ -380,7 +380,7 @@ void *__init relocate_kernel(void)
 		}
 #endif /* CONFIG_USE_OF */
 
-		/* Copy the kernel to it's new location */
+		/* Copy the kernel to its new location */
 		memcpy(loc_new, &_text, kernel_length);
 
 		/* Perform relocations on the new kernel */
diff --git a/arch/mips/kernel/relocate_kernel.S b/arch/mips/kernel/relocate_kernel.S
index 8f0a7263a9d6..de894a0211d7 100644
--- a/arch/mips/kernel/relocate_kernel.S
+++ b/arch/mips/kernel/relocate_kernel.S
@@ -70,7 +70,7 @@ copy_word:
 done:
 #ifdef CONFIG_SMP
 	/* kexec_flag reset is signal to other CPUs what kernel
-	   was moved to it's location. Note - we need relocated address
+	   was moved to its location. Note - we need relocated address
 	   of kexec_flag.  */
 
 	bal		1f
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 0461ab49e8f1..844307a86b15 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -146,7 +146,7 @@ static unsigned long __init init_initrd(void)
 	/*
 	 * Board specific code or command line parser should have
 	 * already set up initrd_start and initrd_end. In these cases
-	 * perfom sanity checks and use them if all looks good.
+	 * perform sanity checks and use them if all looks good.
 	 */
 	if (!initrd_start || initrd_end <= initrd_start)
 		goto disable;
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 479999b7f2de..a8e20fdc7afd 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -569,7 +569,7 @@ void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
 		return (void __user __force *)(-1UL);
 
 	/*
-	 * FPU emulator may have it's own trampoline active just
+	 * FPU emulator may have its own trampoline active just
 	 * above the user stack, 16-bytes before the next lowest
 	 * 16 byte boundary.  Try to avoid trashing it.
 	 */
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index c1b2b18b0505..0e3f2f2fa732 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -2381,7 +2381,7 @@ void __init trap_init(void)
 		set_except_vector(i, handle_reserved);
 
 	/*
-	 * Copy the EJTAG debug exception vector handler code to it's final
+	 * Copy the EJTAG debug exception vector handler code to its final
 	 * destination.
 	 */
 	if (cpu_has_ejtag && board_ejtag_handler_setup)
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index e9a0cfd02ae2..737d0d4fdcd3 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -6,9 +6,9 @@
  * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
  * Copyright (C) 2013 Imagination Technologies Ltd.
  *
- * VPE spport module for loading a MIPS SP program into VPE1. The SP
+ * VPE support module for loading a MIPS SP program into VPE1. The SP
  * environment is rather simple since there are no TLBs. It needs
- * to be relocatable (or partiall linked). Initialize your stack in
+ * to be relocatable (or partially linked). Initialize your stack in
  * the startup-code. The loader looks for the symbol __start and sets
  * up the execution to resume from there. To load and run, simply do
  * a cat SP 'binary' to the /dev/vpe1 device.
diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c
index e64372b8f66a..0feec52222fb 100644
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -531,7 +531,7 @@ static void kvm_mips_resume_hrtimer(struct kvm_vcpu *vcpu,
  * to be used for a period of time, but the exact ktime corresponding to the
  * final Count that must be restored is not known.
  *
- * It is gauranteed that a timer interrupt immediately after restore will be
+ * It is guaranteed that a timer interrupt immediately after restore will be
  * handled, but not if CP0_Compare is exactly at @count. That case should
  * already be handled when the hardware timer state is saved.
  *
diff --git a/arch/mips/loongson2ef/common/platform.c b/arch/mips/loongson2ef/common/platform.c
index 0084820cffaa..b10300a527af 100644
--- a/arch/mips/loongson2ef/common/platform.c
+++ b/arch/mips/loongson2ef/common/platform.c
@@ -17,7 +17,7 @@ static int __init loongson2_cpufreq_init(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
-	/* Only 2F revision and it's successors support CPUFreq */
+	/* Only 2F revision and its successors support CPUFreq */
 	if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F)
 		return platform_device_register(&loongson2_cpufreq_device);
 
diff --git a/arch/mips/loongson64/smp.c b/arch/mips/loongson64/smp.c
index e015a26a40f7..4f6c714430da 100644
--- a/arch/mips/loongson64/smp.c
+++ b/arch/mips/loongson64/smp.c
@@ -516,7 +516,7 @@ static void __init loongson3_prepare_cpus(unsigned int max_cpus)
 }
 
 /*
- * Setup the PC, SP, and GP of a secondary processor and start it runing!
+ * Setup the PC, SP, and GP of a secondary processor and start it running!
  */
 static int loongson3_boot_secondary(int cpu, struct task_struct *idle)
 {
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 187d1c16361c..20d37773b162 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1654,7 +1654,7 @@ static void coherency_setup(void)
 
 	/*
 	 * c0_status.cu=0 specifies that updates by the sc instruction use
-	 * the coherency mode specified by the TLB; 1 means cachable
+	 * the coherency mode specified by the TLB; 1 means cacheable
 	 * coherent update on write will be used.  Not all processors have
 	 * this bit and; some wire it to zero, others like Toshiba had the
 	 * silly idea of putting something else there ...
diff --git a/arch/mips/mm/cex-gen.S b/arch/mips/mm/cex-gen.S
index 45dff5cd4b8e..e528583d1331 100644
--- a/arch/mips/mm/cex-gen.S
+++ b/arch/mips/mm/cex-gen.S
@@ -25,7 +25,7 @@
 	 * This is a very bad place to be.  Our cache error
 	 * detection has triggered.  If we have write-back data
 	 * in the cache, we may not be able to recover.	 As a
-	 * first-order desperate measure, turn off KSEG0 cacheing.
+	 * first-order desperate measure, turn off KSEG0 caching.
 	 */
 	mfc0	k0,CP0_CONFIG
 	li	k1,~CONF_CM_CMASK
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index 53dfa2b9316b..22a8f488ae1d 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -183,7 +183,7 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 	int idx, pid;
 
 	/*
-	 * Handle debugger faulting in for debugee.
+	 * Handle debugger faulting in for debuggee.
 	 */
 	if (current->active_mm != vma->vm_mm)
 		return;
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 93c2d695588a..128a0a5ec2b7 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -301,7 +301,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	int idx, pid;
 
 	/*
-	 * Handle debugger faulting in for debugee.
+	 * Handle debugger faulting in for debuggee.
 	 */
 	if (current->active_mm != vma->vm_mm)
 		return;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index b4e1c783e617..4017fa0e2f68 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -789,7 +789,7 @@ void build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 
 	if (check_for_high_segbits) {
 		/*
-		 * The kernel currently implicitely assumes that the
+		 * The kernel currently implicitly assumes that the
 		 * MIPS SEGBITS parameter for the processor is
 		 * (PGDIR_SHIFT+PGDIR_BITS) or less, and will never
 		 * allocate virtual addresses outside the maximum
@@ -1715,7 +1715,7 @@ iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
 /*
  * Check if PTE is present, if not then jump to LABEL. PTR points to
  * the page table where this PTE is located, PTE will be re-loaded
- * with it's original value.
+ * with its original value.
  */
 static void
 build_pte_present(u32 **p, struct uasm_reloc **r,
diff --git a/arch/mips/net/bpf_jit_comp32.c b/arch/mips/net/bpf_jit_comp32.c
index ace5db3fbd17..40a878b672f5 100644
--- a/arch/mips/net/bpf_jit_comp32.c
+++ b/arch/mips/net/bpf_jit_comp32.c
@@ -95,7 +95,7 @@
 /*
  * Mapping of 64-bit eBPF registers to 32-bit native MIPS registers.
  *
- * 1) Native register pairs are ordered according to CPU endiannes, following
+ * 1) Native register pairs are ordered according to CPU endianness, following
  *    the MIPS convention for passing 64-bit arguments and return values.
  * 2) The eBPF return value, arguments and callee-saved registers are mapped
  *    to their native MIPS equivalents.
diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c
index 0d1b36ba1c21..068113f5c49d 100644
--- a/arch/mips/pci/ops-loongson2.c
+++ b/arch/mips/pci/ops-loongson2.c
@@ -49,7 +49,7 @@ static int loongson_pcibios_config_access(unsigned char access_type,
 		 */
 #ifdef CONFIG_CS5536
 		/* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr() to
-		 * access the regsters PCI_MSR_ADDR, PCI_MSR_DATA_LO,
+		 * access the registers PCI_MSR_ADDR, PCI_MSR_DATA_LO,
 		 * PCI_MSR_DATA_HI, which is bigger than PCI_MSR_CTRL, so, it
 		 * will not go this branch, but the others. so, no calling dead
 		 * loop here.
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index 1c722dd0c130..58625d1b6465 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -453,7 +453,7 @@ static int alchemy_pci_probe(struct platform_device *pdev)
 
 	/* we can't ioremap the entire pci config space because it's too large,
 	 * nor can we dynamically ioremap it because some drivers use the
-	 * PCI config routines from within atomic contex and that becomes a
+	 * PCI config routines from within atomic context and that becomes a
 	 * problem in get_vm_area().  Instead we use one wired TLB entry to
 	 * handle all config accesses for all busses.
 	 */
diff --git a/arch/mips/pci/pci-ar2315.c b/arch/mips/pci/pci-ar2315.c
index e17d862cfa4c..a925842ee125 100644
--- a/arch/mips/pci/pci-ar2315.c
+++ b/arch/mips/pci/pci-ar2315.c
@@ -16,7 +16,7 @@
  * the CFG_SEL bit in the PCI_MISC_CONFIG register.
  *
  * Devices on the bus can perform DMA requests via chip BAR1. PCI host
- * controller BARs are programmend as if an external device is programmed.
+ * controller BARs are programmed as if an external device is programmed.
  * Which means that during configuration, IDSEL pin of the chip should be
  * asserted.
  *
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 80f7293166bb..68a8cefed420 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -152,7 +152,7 @@ static int ltq_pci_startup(struct platform_device *pdev)
 		temp_buffer &= ~0xf0000;
 	/* enable internal arbiter */
 	temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
-	/* enable internal PCI master reqest */
+	/* enable internal PCI master request */
 	temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
 
 	/* enable EBU request */
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index d19d9d456309..36d12cea3512 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -376,7 +376,7 @@ static void octeon_pci_initialize(void)
 	ctl_status.s.timer = 1;
 	cvmx_write_csr(CVMX_NPI_CTL_STATUS, ctl_status.u64);
 
-	/* Deassert PCI reset and advertize PCX Host Mode Device Capability
+	/* Deassert PCI reset and advertise PCX Host Mode Device Capability
 	   (64b) */
 	cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4);
 	cvmx_read_csr(CVMX_CIU_SOFT_PRST);
diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c
index 68d5211afea8..45ddbaa6c123 100644
--- a/arch/mips/pci/pci-xtalk-bridge.c
+++ b/arch/mips/pci/pci-xtalk-bridge.c
@@ -114,7 +114,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
  *
  * The function is complicated by the ultimate brokenness of the IOC3 chip
  * which is used in SGI systems.  The IOC3 can only handle 32-bit PCI
- * accesses and does only decode parts of it's address space.
+ * accesses and does only decode parts of its address space.
  */
 static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
 				 int where, int size, u32 *value)
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index c9edd3fb380d..2583e318e8c6 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -1037,7 +1037,7 @@ retry:
 			in_fif_p_count = dbg_data.s.data & 0xff;
 		} while (in_fif_p_count != ((old_in_fif_p_count+1) & 0xff));
 
-		/* Update in_fif_p_count for it's offset with respect to out_p_count */
+		/* Update in_fif_p_count for its offset with respect to out_p_count */
 		in_fif_p_count = (in_fif_p_count + in_p_offset) & 0xff;
 
 		/* Read the OUT_P_COUNT from the debug select */
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
index 137781d0bd0a..5a9fd3fe41d7 100644
--- a/arch/mips/ralink/mt7621.c
+++ b/arch/mips/ralink/mt7621.c
@@ -175,7 +175,7 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 		 * mips_cm_probe() wipes out bootloader
 		 * config for CM regions and we have to configure them
 		 * again. This SoC cannot talk to pamlbus devices
-		 * witout proper iocu region set up.
+		 * without proper iocu region set up.
 		 *
 		 * FIXME: it would be better to do this with values
 		 * from DT, but we need this very early because
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 5ae30b78d38d..d9249f5a632e 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -348,7 +348,7 @@ static void final_fixup(struct pci_dev *dev)
 	unsigned char bist;
 	int ret;
 
-	/* Do build-in self test */
+	/* Do built-in self test */
 	ret = pci_read_config_byte(dev, PCI_BIST, &bist);
 	if ((ret != PCIBIOS_SUCCESSFUL) || !(bist & PCI_BIST_CAPABLE))
 		return;
-- 
cgit v1.2.3