From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/atm/iphase.h | 1464 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1464 insertions(+) create mode 100644 drivers/atm/iphase.h (limited to 'drivers/atm/iphase.h') diff --git a/drivers/atm/iphase.h b/drivers/atm/iphase.h new file mode 100644 index 000000000000..b8d0bd4d6c30 --- /dev/null +++ b/drivers/atm/iphase.h @@ -0,0 +1,1464 @@ +/****************************************************************************** + Device driver for Interphase ATM PCI adapter cards + Author: Peter Wang + Interphase Corporation + Version: 1.0 + iphase.h: This is the header file for iphase.c. +******************************************************************************* + + This software may be used and distributed according to the terms + of the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on this skeleton fall under the GPL and must retain + the authorship (implicit copyright) notice. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + Modified from an incomplete driver for Interphase 5575 1KVC 1M card which + was originally written by Monalisa Agrawal at UNH. Now this driver + supports a variety of varients of Interphase ATM PCI (i)Chip adapter + card family (See www.iphase.com/products/ClassSheet.cfm?ClassID=ATM) + in terms of PHY type, the size of control memory and the size of + packet memory. The followings are the change log and history: + + Bugfix the Mona's UBR driver. + Modify the basic memory allocation and dma logic. + Port the driver to the latest kernel from 2.0.46. + Complete the ABR logic of the driver, and added the ABR work- + around for the hardware anormalies. + Add the CBR support. + Add the flow control logic to the driver to allow rate-limit VC. + Add 4K VC support to the board with 512K control memory. + Add the support of all the variants of the Interphase ATM PCI + (i)Chip adapter cards including x575 (155M OC3 and UTP155), x525 + (25M UTP25) and x531 (DS3 and E3). + Add SMP support. + + Support and updates available at: ftp://ftp.iphase.com/pub/atm + +*******************************************************************************/ + +#ifndef IPHASE_H +#define IPHASE_H + +#include + +/************************ IADBG DEFINE *********************************/ +/* IADebugFlag Bit Map */ +#define IF_IADBG_INIT_ADAPTER 0x00000001 // init adapter info +#define IF_IADBG_TX 0x00000002 // debug TX +#define IF_IADBG_RX 0x00000004 // debug RX +#define IF_IADBG_QUERY_INFO 0x00000008 // debug Request call +#define IF_IADBG_SHUTDOWN 0x00000010 // debug shutdown event +#define IF_IADBG_INTR 0x00000020 // debug interrupt DPC +#define IF_IADBG_TXPKT 0x00000040 // debug TX PKT +#define IF_IADBG_RXPKT 0x00000080 // debug RX PKT +#define IF_IADBG_ERR 0x00000100 // debug system error +#define IF_IADBG_EVENT 0x00000200 // debug event +#define IF_IADBG_DIS_INTR 0x00001000 // debug disable interrupt +#define IF_IADBG_EN_INTR 0x00002000 // debug enable interrupt +#define IF_IADBG_LOUD 0x00004000 // debugging info +#define IF_IADBG_VERY_LOUD 0x00008000 // excessive debugging info +#define IF_IADBG_CBR 0x00100000 // +#define IF_IADBG_UBR 0x00200000 // +#define IF_IADBG_ABR 0x00400000 // +#define IF_IADBG_DESC 0x01000000 // +#define IF_IADBG_SUNI_STAT 0x02000000 // suni statistics +#define IF_IADBG_RESET 0x04000000 + +#define IF_IADBG(f) if (IADebugFlag & (f)) + +#ifdef CONFIG_ATM_IA_DEBUG /* Debug build */ + +#define IF_LOUD(A) IF_IADBG(IF_IADBG_LOUD) { A } +#define IF_ERR(A) IF_IADBG(IF_IADBG_ERR) { A } +#define IF_VERY_LOUD(A) IF_IADBG( IF_IADBG_VERY_LOUD ) { A } + +#define IF_INIT_ADAPTER(A) IF_IADBG( IF_IADBG_INIT_ADAPTER ) { A } +#define IF_INIT(A) IF_IADBG( IF_IADBG_INIT_ADAPTER ) { A } +#define IF_SUNI_STAT(A) IF_IADBG( IF_IADBG_SUNI_STAT ) { A } +#define IF_QUERY_INFO(A) IF_IADBG( IF_IADBG_QUERY_INFO ) { A } +#define IF_COPY_OVER(A) IF_IADBG( IF_IADBG_COPY_OVER ) { A } + +#define IF_INTR(A) IF_IADBG( IF_IADBG_INTR ) { A } +#define IF_DIS_INTR(A) IF_IADBG( IF_IADBG_DIS_INTR ) { A } +#define IF_EN_INTR(A) IF_IADBG( IF_IADBG_EN_INTR ) { A } + +#define IF_TX(A) IF_IADBG( IF_IADBG_TX ) { A } +#define IF_RX(A) IF_IADBG( IF_IADBG_RX ) { A } +#define IF_TXPKT(A) IF_IADBG( IF_IADBG_TXPKT ) { A } +#define IF_RXPKT(A) IF_IADBG( IF_IADBG_RXPKT ) { A } + +#define IF_SHUTDOWN(A) IF_IADBG(IF_IADBG_SHUTDOWN) { A } +#define IF_CBR(A) IF_IADBG( IF_IADBG_CBR ) { A } +#define IF_UBR(A) IF_IADBG( IF_IADBG_UBR ) { A } +#define IF_ABR(A) IF_IADBG( IF_IADBG_ABR ) { A } +#define IF_EVENT(A) IF_IADBG( IF_IADBG_EVENT) { A } + +#else /* free build */ +#define IF_LOUD(A) +#define IF_VERY_LOUD(A) +#define IF_INIT_ADAPTER(A) +#define IF_INIT(A) +#define IF_SUNI_STAT(A) +#define IF_PVC_CHKPKT(A) +#define IF_QUERY_INFO(A) +#define IF_COPY_OVER(A) +#define IF_HANG(A) +#define IF_INTR(A) +#define IF_DIS_INTR(A) +#define IF_EN_INTR(A) +#define IF_TX(A) +#define IF_RX(A) +#define IF_TXDEBUG(A) +#define IF_VC(A) +#define IF_ERR(A) +#define IF_CBR(A) +#define IF_UBR(A) +#define IF_ABR(A) +#define IF_SHUTDOWN(A) +#define DbgPrint(A) +#define IF_EVENT(A) +#define IF_TXPKT(A) +#define IF_RXPKT(A) +#endif /* CONFIG_ATM_IA_DEBUG */ + +#define isprint(a) ((a >=' ')&&(a <= '~')) +#define ATM_DESC(skb) (skb->protocol) +#define IA_SKB_STATE(skb) (skb->protocol) +#define IA_DLED 1 +#define IA_TX_DONE 2 + +/* iadbg defines */ +#define IA_CMD 0x7749 +typedef struct { + int cmd; + int sub_cmd; + int len; + u32 maddr; + int status; + void __user *buf; +} IA_CMDBUF, *PIA_CMDBUF; + +/* cmds */ +#define MEMDUMP 0x01 + +/* sub_cmds */ +#define MEMDUMP_SEGREG 0x2 +#define MEMDUMP_DEV 0x1 +#define MEMDUMP_REASSREG 0x3 +#define MEMDUMP_FFL 0x4 +#define READ_REG 0x5 +#define WAKE_DBG_WAIT 0x6 + +/************************ IADBG DEFINE END ***************************/ + +#define Boolean(x) ((x) ? 1 : 0) +#define NR_VCI 1024 /* number of VCIs */ +#define NR_VCI_LD 10 /* log2(NR_VCI) */ +#define NR_VCI_4K 4096 /* number of VCIs */ +#define NR_VCI_4K_LD 12 /* log2(NR_VCI) */ +#define MEM_VALID 0xfffffff0 /* mask base address with this */ + +#ifndef PCI_VENDOR_ID_IPHASE +#define PCI_VENDOR_ID_IPHASE 0x107e +#endif +#ifndef PCI_DEVICE_ID_IPHASE_5575 +#define PCI_DEVICE_ID_IPHASE_5575 0x0008 +#endif +#define DEV_LABEL "ia" +#define PCR 207692 +#define ICR 100000 +#define MCR 0 +#define TBE 1000 +#define FRTT 1 +#define RIF 2 +#define RDF 4 +#define NRMCODE 5 /* 0 - 7 */ +#define TRMCODE 3 /* 0 - 7 */ +#define CDFCODE 6 +#define ATDFCODE 2 /* 0 - 15 */ + +/*---------------------- Packet/Cell Memory ------------------------*/ +#define TX_PACKET_RAM 0x00000 /* start of Trasnmit Packet memory - 0 */ +#define DFL_TX_BUF_SZ 10240 /* 10 K buffers */ +#define DFL_TX_BUFFERS 50 /* number of packet buffers for Tx + - descriptor 0 unused */ +#define REASS_RAM_SIZE 0x10000 /* for 64K 1K VC board */ +#define RX_PACKET_RAM 0x80000 /* start of Receive Packet memory - 512K */ +#define DFL_RX_BUF_SZ 10240 /* 10k buffers */ +#define DFL_RX_BUFFERS 50 /* number of packet buffers for Rx + - descriptor 0 unused */ + +struct cpcs_trailer +{ + u_short control; + u_short length; + u_int crc32; +}; + +struct cpcs_trailer_desc +{ + struct cpcs_trailer *cpcs; + dma_addr_t dma_addr; +}; + +struct ia_vcc +{ + int rxing; + int txing; + int NumCbrEntry; + u32 pcr; + u32 saved_tx_quota; + int flow_inc; + struct sk_buff_head txing_skb; + int ltimeout; + u8 vc_desc_cnt; + +}; + +struct abr_vc_table +{ + u_char status; + u_char rdf; + u_short air; + u_int res[3]; + u_int req_rm_cell_data1; + u_int req_rm_cell_data2; + u_int add_rm_cell_data1; + u_int add_rm_cell_data2; +}; + +/* 32 byte entries */ +struct main_vc +{ + u_short type; +#define ABR 0x8000 +#define UBR 0xc000 +#define CBR 0x0000 + /* ABR fields */ + u_short nrm; + u_short trm; + u_short rm_timestamp_hi; + u_short rm_timestamp_lo:8, + crm:8; + u_short remainder; /* ABR and UBR fields - last 10 bits*/ + u_short next_vc_sched; + u_short present_desc; /* all classes */ + u_short last_cell_slot; /* ABR and UBR */ + u_short pcr; + u_short fraction; + u_short icr; + u_short atdf; + u_short mcr; + u_short acr; + u_short unack:8, + status:8; /* all classes */ +#define UIOLI 0x80 +#define CRC_APPEND 0x40 /* for status field - CRC-32 append */ +#define ABR_STATE 0x02 + +}; + + +/* 8 byte entries */ +struct ext_vc +{ + u_short atm_hdr1; + u_short atm_hdr2; + u_short last_desc; + u_short out_of_rate_link; /* reserved for UBR and CBR */ +}; + + +#define DLE_ENTRIES 256 +#define DMA_INT_ENABLE 0x0002 /* use for both Tx and Rx */ +#define TX_DLE_PSI 0x0001 +#define DLE_TOTAL_SIZE (sizeof(struct dle)*DLE_ENTRIES) + +/* Descriptor List Entries (DLE) */ +struct dle +{ + u32 sys_pkt_addr; + u32 local_pkt_addr; + u32 bytes; + u16 prq_wr_ptr_data; + u16 mode; +}; + +struct dle_q +{ + struct dle *start; + struct dle *end; + struct dle *read; + struct dle *write; +}; + +struct free_desc_q +{ + int desc; /* Descriptor number */ + struct free_desc_q *next; +}; + +struct tx_buf_desc { + unsigned short desc_mode; + unsigned short vc_index; + unsigned short res1; /* reserved field */ + unsigned short bytes; + unsigned short buf_start_hi; + unsigned short buf_start_lo; + unsigned short res2[10]; /* reserved field */ +}; + + +struct rx_buf_desc { + unsigned short desc_mode; + unsigned short vc_index; + unsigned short vpi; + unsigned short bytes; + unsigned short buf_start_hi; + unsigned short buf_start_lo; + unsigned short dma_start_hi; + unsigned short dma_start_lo; + unsigned short crc_upper; + unsigned short crc_lower; + unsigned short res:8, timeout:8; + unsigned short res2[5]; /* reserved field */ +}; + +/*--------SAR stuff ---------------------*/ + +#define EPROM_SIZE 0x40000 /* says 64K in the docs ??? */ +#define MAC1_LEN 4 +#define MAC2_LEN 2 + +/*------------ PCI Memory Space Map, 128K SAR memory ----------------*/ +#define IPHASE5575_PCI_CONFIG_REG_BASE 0x0000 +#define IPHASE5575_BUS_CONTROL_REG_BASE 0x1000 /* offsets 0x00 - 0x3c */ +#define IPHASE5575_FRAG_CONTROL_REG_BASE 0x2000 +#define IPHASE5575_REASS_CONTROL_REG_BASE 0x3000 +#define IPHASE5575_DMA_CONTROL_REG_BASE 0x4000 +#define IPHASE5575_FRONT_END_REG_BASE IPHASE5575_DMA_CONTROL_REG_BASE +#define IPHASE5575_FRAG_CONTROL_RAM_BASE 0x10000 +#define IPHASE5575_REASS_CONTROL_RAM_BASE 0x20000 + +/*------------ Bus interface control registers -----------------*/ +#define IPHASE5575_BUS_CONTROL_REG 0x00 +#define IPHASE5575_BUS_STATUS_REG 0x01 /* actual offset 0x04 */ +#define IPHASE5575_MAC1 0x02 +#define IPHASE5575_REV 0x03 +#define IPHASE5575_MAC2 0x03 /*actual offset 0x0e-reg 0x0c*/ +#define IPHASE5575_EXT_RESET 0x04 +#define IPHASE5575_INT_RESET 0x05 /* addr 1c ?? reg 0x06 */ +#define IPHASE5575_PCI_ADDR_PAGE 0x07 /* reg 0x08, 0x09 ?? */ +#define IPHASE5575_EEPROM_ACCESS 0x0a /* actual offset 0x28 */ +#define IPHASE5575_CELL_FIFO_QUEUE_SZ 0x0b +#define IPHASE5575_CELL_FIFO_MARK_STATE 0x0c +#define IPHASE5575_CELL_FIFO_READ_PTR 0x0d +#define IPHASE5575_CELL_FIFO_WRITE_PTR 0x0e +#define IPHASE5575_CELL_FIFO_CELLS_AVL 0x0f /* actual offset 0x3c */ + +/* Bus Interface Control Register bits */ +#define CTRL_FE_RST 0x80000000 +#define CTRL_LED 0x40000000 +#define CTRL_25MBPHY 0x10000000 +#define CTRL_ENCMBMEM 0x08000000 +#define CTRL_ENOFFSEG 0x01000000 +#define CTRL_ERRMASK 0x00400000 +#define CTRL_DLETMASK 0x00100000 +#define CTRL_DLERMASK 0x00080000 +#define CTRL_FEMASK 0x00040000 +#define CTRL_SEGMASK 0x00020000 +#define CTRL_REASSMASK 0x00010000 +#define CTRL_CSPREEMPT 0x00002000 +#define CTRL_B128 0x00000200 +#define CTRL_B64 0x00000100 +#define CTRL_B48 0x00000080 +#define CTRL_B32 0x00000040 +#define CTRL_B16 0x00000020 +#define CTRL_B8 0x00000010 + +/* Bus Interface Status Register bits */ +#define STAT_CMEMSIZ 0xc0000000 +#define STAT_ADPARCK 0x20000000 +#define STAT_RESVD 0x1fffff80 +#define STAT_ERRINT 0x00000040 +#define STAT_MARKINT 0x00000020 +#define STAT_DLETINT 0x00000010 +#define STAT_DLERINT 0x00000008 +#define STAT_FEINT 0x00000004 +#define STAT_SEGINT 0x00000002 +#define STAT_REASSINT 0x00000001 + + +/*--------------- Segmentation control registers -----------------*/ +/* The segmentation registers are 16 bits access and the addresses + are defined as such so the addresses are the actual "offsets" */ +#define IDLEHEADHI 0x00 +#define IDLEHEADLO 0x01 +#define MAXRATE 0x02 +/* Values for MAXRATE register for 155Mbps and 25.6 Mbps operation */ +#define RATE155 0x64b1 // 16 bits float format +#define MAX_ATM_155 352768 // Cells/second p.118 +#define RATE25 0x5f9d + +#define STPARMS 0x03 +#define STPARMS_1K 0x008c +#define STPARMS_2K 0x0049 +#define STPARMS_4K 0x0026 +#define COMP_EN 0x4000 +#define CBR_EN 0x2000 +#define ABR_EN 0x0800 +#define UBR_EN 0x0400 + +#define ABRUBR_ARB 0x04 +#define RM_TYPE 0x05 +/*Value for RM_TYPE register for ATM Forum Traffic Mangement4.0 support*/ +#define RM_TYPE_4_0 0x0100 + +#define SEG_COMMAND_REG 0x17 +/* Values for the command register */ +#define RESET_SEG 0x0055 +#define RESET_SEG_STATE 0x00aa +#define RESET_TX_CELL_CTR 0x00cc + +#define CBR_PTR_BASE 0x20 +#define ABR_SBPTR_BASE 0x22 +#define UBR_SBPTR_BASE 0x23 +#define ABRWQ_BASE 0x26 +#define UBRWQ_BASE 0x27 +#define VCT_BASE 0x28 +#define VCTE_BASE 0x29 +#define CBR_TAB_BEG 0x2c +#define CBR_TAB_END 0x2d +#define PRQ_ST_ADR 0x30 +#define PRQ_ED_ADR 0x31 +#define PRQ_RD_PTR 0x32 +#define PRQ_WR_PTR 0x33 +#define TCQ_ST_ADR 0x34 +#define TCQ_ED_ADR 0x35 +#define TCQ_RD_PTR 0x36 +#define TCQ_WR_PTR 0x37 +#define SEG_QUEUE_BASE 0x40 +#define SEG_DESC_BASE 0x41 +#define MODE_REG_0 0x45 +#define T_ONLINE 0x0002 /* (i)chipSAR is online */ + +#define MODE_REG_1 0x46 +#define MODE_REG_1_VAL 0x0400 /*for propoer device operation*/ + +#define SEG_INTR_STATUS_REG 0x47 +#define SEG_MASK_REG 0x48 +#define TRANSMIT_DONE 0x0200 +#define TCQ_NOT_EMPTY 0x1000 /* this can be used for both the interrupt + status registers as well as the mask register */ + +#define CELL_CTR_HIGH_AUTO 0x49 +#define CELL_CTR_HIGH_NOAUTO 0xc9 +#define CELL_CTR_LO_AUTO 0x4a +#define CELL_CTR_LO_NOAUTO 0xca + +/* Diagnostic registers */ +#define NEXTDESC 0x59 +#define NEXTVC 0x5a +#define PSLOTCNT 0x5d +#define NEWDN 0x6a +#define NEWVC 0x6b +#define SBPTR 0x6c +#define ABRWQ_WRPTR 0x6f +#define ABRWQ_RDPTR 0x70 +#define UBRWQ_WRPTR 0x71 +#define UBRWQ_RDPTR 0x72 +#define CBR_VC 0x73 +#define ABR_SBVC 0x75 +#define UBR_SBVC 0x76 +#define ABRNEXTLINK 0x78 +#define UBRNEXTLINK 0x79 + + +/*----------------- Reassembly control registers ---------------------*/ +/* The reassembly registers are 16 bits access and the addresses + are defined as such so the addresses are the actual "offsets" */ +#define MODE_REG 0x00 +#define R_ONLINE 0x0002 /* (i)chip is online */ +#define IGN_RAW_FL 0x0004 + +#define PROTOCOL_ID 0x01 +#define REASS_MASK_REG 0x02 +#define REASS_INTR_STATUS_REG 0x03 +/* Interrupt Status register bits */ +#define RX_PKT_CTR_OF 0x8000 +#define RX_ERR_CTR_OF 0x4000 +#define RX_CELL_CTR_OF 0x1000 +#define RX_FREEQ_EMPT 0x0200 +#define RX_EXCPQ_FL 0x0080 +#define RX_RAWQ_FL 0x0010 +#define RX_EXCP_RCVD 0x0008 +#define RX_PKT_RCVD 0x0004 +#define RX_RAW_RCVD 0x0001 + +#define DRP_PKT_CNTR 0x04 +#define ERR_CNTR 0x05 +#define RAW_BASE_ADR 0x08 +#define CELL_CTR0 0x0c +#define CELL_CTR1 0x0d +#define REASS_COMMAND_REG 0x0f +/* Values for command register */ +#define RESET_REASS 0x0055 +#define RESET_REASS_STATE 0x00aa +#define RESET_DRP_PKT_CNTR 0x00f1 +#define RESET_ERR_CNTR 0x00f2 +#define RESET_CELL_CNTR 0x00f8 +#define RESET_REASS_ALL_REGS 0x00ff + +#define REASS_DESC_BASE 0x10 +#define VC_LKUP_BASE 0x11 +#define REASS_TABLE_BASE 0x12 +#define REASS_QUEUE_BASE 0x13 +#define PKT_TM_CNT 0x16 +#define TMOUT_RANGE 0x17 +#define INTRVL_CNTR 0x18 +#define TMOUT_INDX 0x19 +#define VP_LKUP_BASE 0x1c +#define VP_FILTER 0x1d +#define ABR_LKUP_BASE 0x1e +#define FREEQ_ST_ADR 0x24 +#define FREEQ_ED_ADR 0x25 +#define FREEQ_RD_PTR 0x26 +#define FREEQ_WR_PTR 0x27 +#define PCQ_ST_ADR 0x28 +#define PCQ_ED_ADR 0x29 +#define PCQ_RD_PTR 0x2a +#define PCQ_WR_PTR 0x2b +#define EXCP_Q_ST_ADR 0x2c +#define EXCP_Q_ED_ADR 0x2d +#define EXCP_Q_RD_PTR 0x2e +#define EXCP_Q_WR_PTR 0x2f +#define CC_FIFO_ST_ADR 0x34 +#define CC_FIFO_ED_ADR 0x35 +#define CC_FIFO_RD_PTR 0x36 +#define CC_FIFO_WR_PTR 0x37 +#define STATE_REG 0x38 +#define BUF_SIZE 0x42 +#define XTRA_RM_OFFSET 0x44 +#define DRP_PKT_CNTR_NC 0x84 +#define ERR_CNTR_NC 0x85 +#define CELL_CNTR0_NC 0x8c +#define CELL_CNTR1_NC 0x8d + +/* State Register bits */ +#define EXCPQ_EMPTY 0x0040 +#define PCQ_EMPTY 0x0010 +#define FREEQ_EMPTY 0x0004 + + +/*----------------- Front End registers/ DMA control --------------*/ +/* There is a lot of documentation error regarding these offsets ??? + eg:- 2 offsets given 800, a00 for rx counter + similarly many others + Remember again that the offsets are to be 4*register number, so + correct the #defines here +*/ +#define IPHASE5575_TX_COUNTER 0x200 /* offset - 0x800 */ +#define IPHASE5575_RX_COUNTER 0x280 /* offset - 0xa00 */ +#define IPHASE5575_TX_LIST_ADDR 0x300 /* offset - 0xc00 */ +#define IPHASE5575_RX_LIST_ADDR 0x380 /* offset - 0xe00 */ + +/*--------------------------- RAM ---------------------------*/ +/* These memory maps are actually offsets from the segmentation and reassembly RAM base addresses */ + +/* Segmentation Control Memory map */ +#define TX_DESC_BASE 0x0000 /* Buffer Decriptor Table */ +#define TX_COMP_Q 0x1000 /* Transmit Complete Queue */ +#define PKT_RDY_Q 0x1400 /* Packet Ready Queue */ +#define CBR_SCHED_TABLE 0x1800 /* CBR Table */ +#define UBR_SCHED_TABLE 0x3000 /* UBR Table */ +#define UBR_WAIT_Q 0x4000 /* UBR Wait Queue */ +#define ABR_SCHED_TABLE 0x5000 /* ABR Table */ +#define ABR_WAIT_Q 0x5800 /* ABR Wait Queue */ +#define EXT_VC_TABLE 0x6000 /* Extended VC Table */ +#define MAIN_VC_TABLE 0x8000 /* Main VC Table */ +#define SCHEDSZ 1024 /* ABR and UBR Scheduling Table size */ +#define TX_DESC_TABLE_SZ 128 /* Number of entries in the Transmit + Buffer Descriptor Table */ + +/* These are used as table offsets in Descriptor Table address generation */ +#define DESC_MODE 0x0 +#define VC_INDEX 0x1 +#define BYTE_CNT 0x3 +#define PKT_START_HI 0x4 +#define PKT_START_LO 0x5 + +/* Descriptor Mode Word Bits */ +#define EOM_EN 0x0800 +#define AAL5 0x0100 +#define APP_CRC32 0x0400 +#define CMPL_INT 0x1000 + +#define TABLE_ADDRESS(db, dn, to) \ + (((unsigned long)(db & 0x04)) << 16) | (dn << 5) | (to << 1) + +/* Reassembly Control Memory Map */ +#define RX_DESC_BASE 0x0000 /* Buffer Descriptor Table */ +#define VP_TABLE 0x5c00 /* VP Table */ +#define EXCEPTION_Q 0x5e00 /* Exception Queue */ +#define FREE_BUF_DESC_Q 0x6000 /* Free Buffer Descriptor Queue */ +#define PKT_COMP_Q 0x6800 /* Packet Complete Queue */ +#define REASS_TABLE 0x7000 /* Reassembly Table */ +#define RX_VC_TABLE 0x7800 /* VC Table */ +#define ABR_VC_TABLE 0x8000 /* ABR VC Table */ +#define RX_DESC_TABLE_SZ 736 /* Number of entries in the Receive + Buffer Descriptor Table */ +#define VP_TABLE_SZ 256 /* Number of entries in VPTable */ +#define RX_VC_TABLE_SZ 1024 /* Number of entries in VC Table */ +#define REASS_TABLE_SZ 1024 /* Number of entries in Reassembly Table */ + /* Buffer Descriptor Table */ +#define RX_ACT 0x8000 +#define RX_VPVC 0x4000 +#define RX_CNG 0x0040 +#define RX_CER 0x0008 +#define RX_PTE 0x0004 +#define RX_OFL 0x0002 +#define NUM_RX_EXCP 32 + +/* Reassembly Table */ +#define NO_AAL5_PKT 0x0000 +#define AAL5_PKT_REASSEMBLED 0x4000 +#define AAL5_PKT_TERMINATED 0x8000 +#define RAW_PKT 0xc000 +#define REASS_ABR 0x2000 + +/*-------------------- Base Registers --------------------*/ +#define REG_BASE IPHASE5575_BUS_CONTROL_REG_BASE +#define RAM_BASE IPHASE5575_FRAG_CONTROL_RAM_BASE +#define PHY_BASE IPHASE5575_FRONT_END_REG_BASE +#define SEG_BASE IPHASE5575_FRAG_CONTROL_REG_BASE +#define REASS_BASE IPHASE5575_REASS_CONTROL_REG_BASE + +typedef volatile u_int freg_t; +typedef u_int rreg_t; + +typedef struct _ffredn_t { + freg_t idlehead_high; /* Idle cell header (high) */ + freg_t idlehead_low; /* Idle cell header (low) */ + freg_t maxrate; /* Maximum rate */ + freg_t stparms; /* Traffic Management Parameters */ + freg_t abrubr_abr; /* ABRUBR Priority Byte 1, TCR Byte 0 */ + freg_t rm_type; /* */ + u_int filler5[0x17 - 0x06]; + freg_t cmd_reg; /* Command register */ + u_int filler18[0x20 - 0x18]; + freg_t cbr_base; /* CBR Pointer Base */ + freg_t vbr_base; /* VBR Pointer Base */ + freg_t abr_base; /* ABR Pointer Base */ + freg_t ubr_base; /* UBR Pointer Base */ + u_int filler24; + freg_t vbrwq_base; /* VBR Wait Queue Base */ + freg_t abrwq_base; /* ABR Wait Queue Base */ + freg_t ubrwq_base; /* UBR Wait Queue Base */ + freg_t vct_base; /* Main VC Table Base */ + freg_t vcte_base; /* Extended Main VC Table Base */ + u_int filler2a[0x2C - 0x2A]; + freg_t cbr_tab_beg; /* CBR Table Begin */ + freg_t cbr_tab_end; /* CBR Table End */ + freg_t cbr_pointer; /* CBR Pointer */ + u_int filler2f[0x30 - 0x2F]; + freg_t prq_st_adr; /* Packet Ready Queue Start Address */ + freg_t prq_ed_adr; /* Packet Ready Queue End Address */ + freg_t prq_rd_ptr; /* Packet Ready Queue read pointer */ + freg_t prq_wr_ptr; /* Packet Ready Queue write pointer */ + freg_t tcq_st_adr; /* Transmit Complete Queue Start Address*/ + freg_t tcq_ed_adr; /* Transmit Complete Queue End Address */ + freg_t tcq_rd_ptr; /* Transmit Complete Queue read pointer */ + freg_t tcq_wr_ptr; /* Transmit Complete Queue write pointer*/ + u_int filler38[0x40 - 0x38]; + freg_t queue_base; /* Base address for PRQ and TCQ */ + freg_t desc_base; /* Base address of descriptor table */ + u_int filler42[0x45 - 0x42]; + freg_t mode_reg_0; /* Mode register 0 */ + freg_t mode_reg_1; /* Mode register 1 */ + freg_t intr_status_reg;/* Interrupt Status register */ + freg_t mask_reg; /* Mask Register */ + freg_t cell_ctr_high1; /* Total cell transfer count (high) */ + freg_t cell_ctr_lo1; /* Total cell transfer count (low) */ + freg_t state_reg; /* Status register */ + u_int filler4c[0x58 - 0x4c]; + freg_t curr_desc_num; /* Contains the current descriptor num */ + freg_t next_desc; /* Next descriptor */ + freg_t next_vc; /* Next VC */ + u_int filler5b[0x5d - 0x5b]; + freg_t present_slot_cnt;/* Present slot count */ + u_int filler5e[0x6a - 0x5e]; + freg_t new_desc_num; /* New descriptor number */ + freg_t new_vc; /* New VC */ + freg_t sched_tbl_ptr; /* Schedule table pointer */ + freg_t vbrwq_wptr; /* VBR wait queue write pointer */ + freg_t vbrwq_rptr; /* VBR wait queue read pointer */ + freg_t abrwq_wptr; /* ABR wait queue write pointer */ + freg_t abrwq_rptr; /* ABR wait queue read pointer */ + freg_t ubrwq_wptr; /* UBR wait queue write pointer */ + freg_t ubrwq_rptr; /* UBR wait queue read pointer */ + freg_t cbr_vc; /* CBR VC */ + freg_t vbr_sb_vc; /* VBR SB VC */ + freg_t abr_sb_vc; /* ABR SB VC */ + freg_t ubr_sb_vc; /* UBR SB VC */ + freg_t vbr_next_link; /* VBR next link */ + freg_t abr_next_link; /* ABR next link */ + freg_t ubr_next_link; /* UBR next link */ + u_int filler7a[0x7c-0x7a]; + freg_t out_rate_head; /* Out of rate head */ + u_int filler7d[0xca-0x7d]; /* pad out to full address space */ + freg_t cell_ctr_high1_nc;/* Total cell transfer count (high) */ + freg_t cell_ctr_lo1_nc;/* Total cell transfer count (low) */ + u_int fillercc[0x100-0xcc]; /* pad out to full address space */ +} ffredn_t; + +typedef struct _rfredn_t { + rreg_t mode_reg_0; /* Mode register 0 */ + rreg_t protocol_id; /* Protocol ID */ + rreg_t mask_reg; /* Mask Register */ + rreg_t intr_status_reg;/* Interrupt status register */ + rreg_t drp_pkt_cntr; /* Dropped packet cntr (clear on read) */ + rreg_t err_cntr; /* Error Counter (cleared on read) */ + u_int filler6[0x08 - 0x06]; + rreg_t raw_base_adr; /* Base addr for raw cell Q */ + u_int filler2[0x0c - 0x09]; + rreg_t cell_ctr0; /* Cell Counter 0 (cleared when read) */ + rreg_t cell_ctr1; /* Cell Counter 1 (cleared when read) */ + u_int filler3[0x0f - 0x0e]; + rreg_t cmd_reg; /* Command register */ + rreg_t desc_base; /* Base address for description table */ + rreg_t vc_lkup_base; /* Base address for VC lookup table */ + rreg_t reass_base; /* Base address for reassembler table */ + rreg_t queue_base; /* Base address for Communication queue */ + u_int filler14[0x16 - 0x14]; + rreg_t pkt_tm_cnt; /* Packet Timeout and count register */ + rreg_t tmout_range; /* Range of reassembley IDs for timeout */ + rreg_t intrvl_cntr; /* Packet aging interval counter */ + rreg_t tmout_indx; /* index of pkt being tested for aging */ + u_int filler1a[0x1c - 0x1a]; + rreg_t vp_lkup_base; /* Base address for VP lookup table */ + rreg_t vp_filter; /* VP filter register */ + rreg_t abr_lkup_base; /* Base address of ABR VC Table */ + u_int filler1f[0x24 - 0x1f]; + rreg_t fdq_st_adr; /* Free desc queue start address */ + rreg_t fdq_ed_adr; /* Free desc queue end address */ + rreg_t fdq_rd_ptr; /* Free desc queue read pointer */ + rreg_t fdq_wr_ptr; /* Free desc queue write pointer */ + rreg_t pcq_st_adr; /* Packet Complete queue start address */ + rreg_t pcq_ed_adr; /* Packet Complete queue end address */ + rreg_t pcq_rd_ptr; /* Packet Complete queue read pointer */ + rreg_t pcq_wr_ptr; /* Packet Complete queue write pointer */ + rreg_t excp_st_adr; /* Exception queue start address */ + rreg_t excp_ed_adr; /* Exception queue end address */ + rreg_t excp_rd_ptr; /* Exception queue read pointer */ + rreg_t excp_wr_ptr; /* Exception queue write pointer */ + u_int filler30[0x34 - 0x30]; + rreg_t raw_st_adr; /* Raw Cell start address */ + rreg_t raw_ed_adr; /* Raw Cell end address */ + rreg_t raw_rd_ptr; /* Raw Cell read pointer */ + rreg_t raw_wr_ptr; /* Raw Cell write pointer */ + rreg_t state_reg; /* State Register */ + u_int filler39[0x42 - 0x39]; + rreg_t buf_size; /* Buffer size */ + u_int filler43; + rreg_t xtra_rm_offset; /* Offset of the additional turnaround RM */ + u_int filler45[0x84 - 0x45]; + rreg_t drp_pkt_cntr_nc;/* Dropped Packet cntr, Not clear on rd */ + rreg_t err_cntr_nc; /* Error Counter, Not clear on read */ + u_int filler86[0x8c - 0x86]; + rreg_t cell_ctr0_nc; /* Cell Counter 0, Not clear on read */ + rreg_t cell_ctr1_nc; /* Cell Counter 1, Not clear on read */ + u_int filler8e[0x100-0x8e]; /* pad out to full address space */ +} rfredn_t; + +typedef struct { + /* Atlantic */ + ffredn_t ffredn; /* F FRED */ + rfredn_t rfredn; /* R FRED */ +} ia_regs_t; + +typedef struct { + u_short f_vc_type; /* VC type */ + u_short f_nrm; /* Nrm */ + u_short f_nrmexp; /* Nrm Exp */ + u_short reserved6; /* */ + u_short f_crm; /* Crm */ + u_short reserved10; /* Reserved */ + u_short reserved12; /* Reserved */ + u_short reserved14; /* Reserved */ + u_short last_cell_slot; /* last_cell_slot_count */ + u_short f_pcr; /* Peak Cell Rate */ + u_short fraction; /* fraction */ + u_short f_icr; /* Initial Cell Rate */ + u_short f_cdf; /* */ + u_short f_mcr; /* Minimum Cell Rate */ + u_short f_acr; /* Allowed Cell Rate */ + u_short f_status; /* */ +} f_vc_abr_entry; + +typedef struct { + u_short r_status_rdf; /* status + RDF */ + u_short r_air; /* AIR */ + u_short reserved4[14]; /* Reserved */ +} r_vc_abr_entry; + +#define MRM 3 + +typedef struct srv_cls_param { + u32 class_type; /* CBR/VBR/ABR/UBR; use the enum above */ + u32 pcr; /* Peak Cell Rate (24-bit) */ + /* VBR parameters */ + u32 scr; /* sustainable cell rate */ + u32 max_burst_size; /* ?? cell rate or data rate */ + + /* ABR only UNI 4.0 Parameters */ + u32 mcr; /* Min Cell Rate (24-bit) */ + u32 icr; /* Initial Cell Rate (24-bit) */ + u32 tbe; /* Transient Buffer Exposure (24-bit) */ + u32 frtt; /* Fixed Round Trip Time (24-bit) */ + +#if 0 /* Additional Parameters of TM 4.0 */ +bits 31 30 29 28 27-25 24-22 21-19 18-9 +----------------------------------------------------------------------------- +| NRM present | TRM prsnt | CDF prsnt | ADTF prsnt | NRM | TRM | CDF | ADTF | +----------------------------------------------------------------------------- +#endif /* 0 */ + + u8 nrm; /* Max # of Cells for each forward RM + cell (3-bit) */ + u8 trm; /* Time between forward RM cells (3-bit) */ + u16 adtf; /* ACR Decrease Time Factor (10-bit) */ + u8 cdf; /* Cutoff Decrease Factor (3-bit) */ + u8 rif; /* Rate Increment Factor (4-bit) */ + u8 rdf; /* Rate Decrease Factor (4-bit) */ + u8 reserved; /* 8 bits to keep structure word aligned */ +} srv_cls_param_t; + +struct testTable_t { + u16 lastTime; + u16 fract; + u8 vc_status; +}; + +typedef struct { + u16 vci; + u16 error; +} RX_ERROR_Q; + +typedef struct { + u8 active: 1; + u8 abr: 1; + u8 ubr: 1; + u8 cnt: 5; +#define VC_ACTIVE 0x01 +#define VC_ABR 0x02 +#define VC_UBR 0x04 +} vcstatus_t; + +struct ia_rfL_t { + u32 fdq_st; /* Free desc queue start address */ + u32 fdq_ed; /* Free desc queue end address */ + u32 fdq_rd; /* Free desc queue read pointer */ + u32 fdq_wr; /* Free desc queue write pointer */ + u32 pcq_st; /* Packet Complete queue start address */ + u32 pcq_ed; /* Packet Complete queue end address */ + u32 pcq_rd; /* Packet Complete queue read pointer */ + u32 pcq_wr; /* Packet Complete queue write pointer */ +}; + +struct ia_ffL_t { + u32 prq_st; /* Packet Ready Queue Start Address */ + u32 prq_ed; /* Packet Ready Queue End Address */ + u32 prq_wr; /* Packet Ready Queue write pointer */ + u32 tcq_st; /* Transmit Complete Queue Start Address*/ + u32 tcq_ed; /* Transmit Complete Queue End Address */ + u32 tcq_rd; /* Transmit Complete Queue read pointer */ +}; + +struct desc_tbl_t { + u32 timestamp; + struct ia_vcc *iavcc; + struct sk_buff *txskb; +}; + +typedef struct ia_rtn_q { + struct desc_tbl_t data; + struct ia_rtn_q *next, *tail; +} IARTN_Q; + +#define SUNI_LOSV 0x04 +typedef struct { + u32 suni_master_reset; /* SUNI Master Reset and Identity */ + u32 suni_master_config; /* SUNI Master Configuration */ + u32 suni_master_intr_stat; /* SUNI Master Interrupt Status */ + u32 suni_reserved1; /* Reserved */ + u32 suni_master_clk_monitor;/* SUNI Master Clock Monitor */ + u32 suni_master_control; /* SUNI Master Clock Monitor */ + u32 suni_reserved2[10]; /* Reserved */ + + u32 suni_rsop_control; /* RSOP Control/Interrupt Enable */ + u32 suni_rsop_status; /* RSOP Status/Interrupt States */ + u32 suni_rsop_section_bip8l;/* RSOP Section BIP-8 LSB */ + u32 suni_rsop_section_bip8m;/* RSOP Section BIP-8 MSB */ + + u32 suni_tsop_control; /* TSOP Control */ + u32 suni_tsop_diag; /* TSOP Disgnostics */ + u32 suni_tsop_reserved[2]; /* TSOP Reserved */ + + u32 suni_rlop_cs; /* RLOP Control/Status */ + u32 suni_rlop_intr; /* RLOP Interrupt Enable/Status */ + u32 suni_rlop_line_bip24l; /* RLOP Line BIP-24 LSB */ + u32 suni_rlop_line_bip24; /* RLOP Line BIP-24 */ + u32 suni_rlop_line_bip24m; /* RLOP Line BIP-24 MSB */ + u32 suni_rlop_line_febel; /* RLOP Line FEBE LSB */ + u32 suni_rlop_line_febe; /* RLOP Line FEBE */ + u32 suni_rlop_line_febem; /* RLOP Line FEBE MSB */ + + u32 suni_tlop_control; /* TLOP Control */ + u32 suni_tlop_disg; /* TLOP Disgnostics */ + u32 suni_tlop_reserved[14]; /* TLOP Reserved */ + + u32 suni_rpop_cs; /* RPOP Status/Control */ + u32 suni_rpop_intr; /* RPOP Interrupt/Status */ + u32 suni_rpop_reserved; /* RPOP Reserved */ + u32 suni_rpop_intr_ena; /* RPOP Interrupt Enable */ + u32 suni_rpop_reserved1[3]; /* RPOP Reserved */ + u32 suni_rpop_path_sig; /* RPOP Path Signal Label */ + u32 suni_rpop_bip8l; /* RPOP Path BIP-8 LSB */ + u32 suni_rpop_bip8m; /* RPOP Path BIP-8 MSB */ + u32 suni_rpop_febel; /* RPOP Path FEBE LSB */ + u32 suni_rpop_febem; /* RPOP Path FEBE MSB */ + u32 suni_rpop_reserved2[4]; /* RPOP Reserved */ + + u32 suni_tpop_cntrl_daig; /* TPOP Control/Disgnostics */ + u32 suni_tpop_pointer_ctrl; /* TPOP Pointer Control */ + u32 suni_tpop_sourcer_ctrl; /* TPOP Source Control */ + u32 suni_tpop_reserved1[2]; /* TPOP Reserved */ + u32 suni_tpop_arb_prtl; /* TPOP Arbitrary Pointer LSB */ + u32 suni_tpop_arb_prtm; /* TPOP Arbitrary Pointer MSB */ + u32 suni_tpop_reserved2; /* TPOP Reserved */ + u32 suni_tpop_path_sig; /* TPOP Path Signal Lable */ + u32 suni_tpop_path_status; /* TPOP Path Status */ + u32 suni_tpop_reserved3[6]; /* TPOP Reserved */ + + u32 suni_racp_cs; /* RACP Control/Status */ + u32 suni_racp_intr; /* RACP Interrupt Enable/Status */ + u32 suni_racp_hdr_pattern; /* RACP Match Header Pattern */ + u32 suni_racp_hdr_mask; /* RACP Match Header Mask */ + u32 suni_racp_corr_hcs; /* RACP Correctable HCS Error Count */ + u32 suni_racp_uncorr_hcs; /* RACP Uncorrectable HCS Error Count */ + u32 suni_racp_reserved[10]; /* RACP Reserved */ + + u32 suni_tacp_control; /* TACP Control */ + u32 suni_tacp_idle_hdr_pat; /* TACP Idle Cell Header Pattern */ + u32 suni_tacp_idle_pay_pay; /* TACP Idle Cell Payld Octet Pattern */ + u32 suni_tacp_reserved[5]; /* TACP Reserved */ + + u32 suni_reserved3[24]; /* Reserved */ + + u32 suni_master_test; /* SUNI Master Test */ + u32 suni_reserved_test; /* SUNI Reserved for Test */ +} IA_SUNI; + + +typedef struct _SUNI_STATS_ +{ + u32 valid; // 1 = oc3 PHY card + u32 carrier_detect; // GPIN input + // RSOP: receive section overhead processor + u16 rsop_oof_state; // 1 = out of frame + u16 rsop_lof_state; // 1 = loss of frame + u16 rsop_los_state; // 1 = loss of signal + u32 rsop_los_count; // loss of signal count + u32 rsop_bse_count; // section BIP-8 error count + // RLOP: receive line overhead processor + u16 rlop_ferf_state; // 1 = far end receive failure + u16 rlop_lais_state; // 1 = line AIS + u32 rlop_lbe_count; // BIP-24 count + u32 rlop_febe_count; // FEBE count; + // RPOP: receive path overhead processor + u16 rpop_lop_state; // 1 = LOP + u16 rpop_pais_state; // 1 = path AIS + u16 rpop_pyel_state; // 1 = path yellow alert + u32 rpop_bip_count; // path BIP-8 error count + u32 rpop_febe_count; // path FEBE error count + u16 rpop_psig; // path signal label value + // RACP: receive ATM cell processor + u16 racp_hp_state; // hunt/presync state + u32 racp_fu_count; // FIFO underrun count + u32 racp_fo_count; // FIFO overrun count + u32 racp_chcs_count; // correctable HCS error count + u32 racp_uchcs_count; // uncorrectable HCS error count +} IA_SUNI_STATS; + +typedef struct iadev_t { + /*-----base pointers into (i)chipSAR+ address space */ + u32 __iomem *phy; /* base pointer into phy(SUNI) */ + u32 __iomem *dma; /* base pointer into DMA control + registers */ + u32 __iomem *reg; /* base pointer to SAR registers + - Bus Interface Control Regs */ + u32 __iomem *seg_reg; /* base pointer to segmentation engine + internal registers */ + u32 __iomem *reass_reg; /* base pointer to reassemble engine + internal registers */ + u32 __iomem *ram; /* base pointer to SAR RAM */ + void __iomem *seg_ram; + void __iomem *reass_ram; + struct dle_q tx_dle_q; + struct free_desc_q *tx_free_desc_qhead; + struct sk_buff_head tx_dma_q, tx_backlog; + spinlock_t tx_lock; + IARTN_Q tx_return_q; + u32 close_pending; + wait_queue_head_t close_wait; + wait_queue_head_t timeout_wait; + struct cpcs_trailer_desc *tx_buf; + u16 num_tx_desc, tx_buf_sz, rate_limit; + u32 tx_cell_cnt, tx_pkt_cnt; + void __iomem *MAIN_VC_TABLE_ADDR, *EXT_VC_TABLE_ADDR, *ABR_SCHED_TABLE_ADDR; + struct dle_q rx_dle_q; + struct free_desc_q *rx_free_desc_qhead; + struct sk_buff_head rx_dma_q; + spinlock_t rx_lock, misc_lock; + struct atm_vcc **rx_open; /* list of all open VCs */ + u16 num_rx_desc, rx_buf_sz, rxing; + u32 rx_pkt_ram, rx_tmp_cnt, rx_tmp_jif; + void __iomem *RX_DESC_BASE_ADDR; + u32 drop_rxpkt, drop_rxcell, rx_cell_cnt, rx_pkt_cnt; + struct atm_dev *next_board; /* other iphase devices */ + struct pci_dev *pci; + int mem; + unsigned int real_base; /* real and virtual base address */ + void __iomem *base; + unsigned int pci_map_size; /*pci map size of board */ + unsigned char irq; + unsigned char bus; + unsigned char dev_fn; + u_short phy_type; + u_short num_vc, memSize, memType; + struct ia_ffL_t ffL; + struct ia_rfL_t rfL; + /* Suni stat */ + // IA_SUNI_STATS suni_stats; + unsigned char carrier_detect; + /* CBR related */ + // transmit DMA & Receive + unsigned int tx_dma_cnt; // number of elements on dma queue + unsigned int rx_dma_cnt; // number of elements on rx dma queue + unsigned int NumEnabledCBR; // number of CBR VCI's enabled. CBR + // receive MARK for Cell FIFO + unsigned int rx_mark_cnt; // number of elements on mark queue + unsigned int CbrTotEntries; // Total CBR Entries in Scheduling Table. + unsigned int CbrRemEntries; // Remaining CBR Entries in Scheduling Table. + unsigned int CbrEntryPt; // CBR Sched Table Entry Point. + unsigned int Granularity; // CBR Granularity given Table Size. + /* ABR related */ + unsigned int sum_mcr, sum_cbr, LineRate; + unsigned int n_abr; + struct desc_tbl_t *desc_tbl; + u_short host_tcq_wr; + struct testTable_t **testTable; + dma_addr_t tx_dle_dma; + dma_addr_t rx_dle_dma; +} IADEV; + + +#define INPH_IA_DEV(d) ((IADEV *) (d)->dev_data) +#define INPH_IA_VCC(v) ((struct ia_vcc *) (v)->dev_data) + +/******************* IDT77105 25MB/s PHY DEFINE *****************************/ +typedef struct { + u_int mb25_master_ctrl; /* Master control */ + u_int mb25_intr_status; /* Interrupt status */ + u_int mb25_diag_control; /* Diagnostic control */ + u_int mb25_led_hec; /* LED driver and HEC status/control */ + u_int mb25_low_byte_counter; /* Low byte counter */ + u_int mb25_high_byte_counter; /* High byte counter */ +} ia_mb25_t; + +/* + * Master Control + */ +#define MB25_MC_UPLO 0x80 /* UPLO */ +#define MB25_MC_DREC 0x40 /* Discard receive cell errors */ +#define MB25_MC_ECEIO 0x20 /* Enable Cell Error Interrupts Only */ +#define MB25_MC_TDPC 0x10 /* Transmit data parity check */ +#define MB25_MC_DRIC 0x08 /* Discard receive idle cells */ +#define MB25_MC_HALTTX 0x04 /* Halt Tx */ +#define MB25_MC_UMS 0x02 /* UTOPIA mode select */ +#define MB25_MC_ENABLED 0x01 /* Enable interrupt */ + +/* + * Interrupt Status + */ +#define MB25_IS_GSB 0x40 /* GOOD Symbol Bit */ +#define MB25_IS_HECECR 0x20 /* HEC error cell received */ +#define MB25_IS_SCR 0x10 /* "Short Cell" Received */ +#define MB25_IS_TPE 0x08 /* Trnamsit Parity Error */ +#define MB25_IS_RSCC 0x04 /* Receive Signal Condition change */ +#define MB25_IS_RCSE 0x02 /* Received Cell Symbol Error */ +#define MB25_IS_RFIFOO 0x01 /* Received FIFO Overrun */ + +/* + * Diagnostic Control + */ +#define MB25_DC_FTXCD 0x80 /* Force TxClav deassert */ +#define MB25_DC_RXCOS 0x40 /* RxClav operation select */ +#define MB25_DC_ECEIO 0x20 /* Single/Multi-PHY config select */ +#define MB25_DC_RLFLUSH 0x10 /* Clear receive FIFO */ +#define MB25_DC_IXPE 0x08 /* Insert xmit payload error */ +#define MB25_DC_IXHECE 0x04 /* Insert Xmit HEC Error */ +#define MB25_DC_LB_MASK 0x03 /* Loopback control mask */ + +#define MB25_DC_LL 0x03 /* Line Loopback */ +#define MB25_DC_PL 0x02 /* PHY Loopback */ +#define MB25_DC_NM 0x00 + +#define FE_MASK 0x00F0 +#define FE_MULTI_MODE 0x0000 +#define FE_SINGLE_MODE 0x0010 +#define FE_UTP_OPTION 0x0020 +#define FE_25MBIT_PHY 0x0040 +#define FE_DS3_PHY 0x0080 /* DS3 */ +#define FE_E3_PHY 0x0090 /* E3 */ + +/*********************** SUNI_PM7345 PHY DEFINE HERE *********************/ +typedef struct _suni_pm7345_t +{ + u_int suni_config; /* SUNI Configuration */ + u_int suni_intr_enbl; /* SUNI Interrupt Enable */ + u_int suni_intr_stat; /* SUNI Interrupt Status */ + u_int suni_control; /* SUNI Control */ + u_int suni_id_reset; /* SUNI Reset and Identity */ + u_int suni_data_link_ctrl; + u_int suni_rboc_conf_intr_enbl; + u_int suni_rboc_stat; + u_int suni_ds3_frm_cfg; + u_int suni_ds3_frm_intr_enbl; + u_int suni_ds3_frm_intr_stat; + u_int suni_ds3_frm_stat; + u_int suni_rfdl_cfg; + u_int suni_rfdl_enbl_stat; + u_int suni_rfdl_stat; + u_int suni_rfdl_data; + u_int suni_pmon_chng; + u_int suni_pmon_intr_enbl_stat; + u_int suni_reserved1[0x13-0x11]; + u_int suni_pmon_lcv_evt_cnt_lsb; + u_int suni_pmon_lcv_evt_cnt_msb; + u_int suni_pmon_fbe_evt_cnt_lsb; + u_int suni_pmon_fbe_evt_cnt_msb; + u_int suni_pmon_sez_det_cnt_lsb; + u_int suni_pmon_sez_det_cnt_msb; + u_int suni_pmon_pe_evt_cnt_lsb; + u_int suni_pmon_pe_evt_cnt_msb; + u_int suni_pmon_ppe_evt_cnt_lsb; + u_int suni_pmon_ppe_evt_cnt_msb; + u_int suni_pmon_febe_evt_cnt_lsb; + u_int suni_pmon_febe_evt_cnt_msb; + u_int suni_ds3_tran_cfg; + u_int suni_ds3_tran_diag; + u_int suni_reserved2[0x23-0x21]; + u_int suni_xfdl_cfg; + u_int suni_xfdl_intr_st; + u_int suni_xfdl_xmit_data; + u_int suni_xboc_code; + u_int suni_splr_cfg; + u_int suni_splr_intr_en; + u_int suni_splr_intr_st; + u_int suni_splr_status; + u_int suni_splt_cfg; + u_int suni_splt_cntl; + u_int suni_splt_diag_g1; + u_int suni_splt_f1; + u_int suni_cppm_loc_meters; + u_int suni_cppm_chng_of_cppm_perf_meter; + u_int suni_cppm_b1_err_cnt_lsb; + u_int suni_cppm_b1_err_cnt_msb; + u_int suni_cppm_framing_err_cnt_lsb; + u_int suni_cppm_framing_err_cnt_msb; + u_int suni_cppm_febe_cnt_lsb; + u_int suni_cppm_febe_cnt_msb; + u_int suni_cppm_hcs_err_cnt_lsb; + u_int suni_cppm_hcs_err_cnt_msb; + u_int suni_cppm_idle_un_cell_cnt_lsb; + u_int suni_cppm_idle_un_cell_cnt_msb; + u_int suni_cppm_rcv_cell_cnt_lsb; + u_int suni_cppm_rcv_cell_cnt_msb; + u_int suni_cppm_xmit_cell_cnt_lsb; + u_int suni_cppm_xmit_cell_cnt_msb; + u_int suni_rxcp_ctrl; + u_int suni_rxcp_fctrl; + u_int suni_rxcp_intr_en_sts; + u_int suni_rxcp_idle_pat_h1; + u_int suni_rxcp_idle_pat_h2; + u_int suni_rxcp_idle_pat_h3; + u_int suni_rxcp_idle_pat_h4; + u_int suni_rxcp_idle_mask_h1; + u_int suni_rxcp_idle_mask_h2; + u_int suni_rxcp_idle_mask_h3; + u_int suni_rxcp_idle_mask_h4; + u_int suni_rxcp_cell_pat_h1; + u_int suni_rxcp_cell_pat_h2; + u_int suni_rxcp_cell_pat_h3; + u_int suni_rxcp_cell_pat_h4; + u_int suni_rxcp_cell_mask_h1; + u_int suni_rxcp_cell_mask_h2; + u_int suni_rxcp_cell_mask_h3; + u_int suni_rxcp_cell_mask_h4; + u_int suni_rxcp_hcs_cs; + u_int suni_rxcp_lcd_cnt_threshold; + u_int suni_reserved3[0x57-0x54]; + u_int suni_txcp_ctrl; + u_int suni_txcp_intr_en_sts; + u_int suni_txcp_idle_pat_h1; + u_int suni_txcp_idle_pat_h2; + u_int suni_txcp_idle_pat_h3; + u_int suni_txcp_idle_pat_h4; + u_int suni_txcp_idle_pat_h5; + u_int suni_txcp_idle_payload; + u_int suni_e3_frm_fram_options; + u_int suni_e3_frm_maint_options; + u_int suni_e3_frm_fram_intr_enbl; + u_int suni_e3_frm_fram_intr_ind_stat; + u_int suni_e3_frm_maint_intr_enbl; + u_int suni_e3_frm_maint_intr_ind; + u_int suni_e3_frm_maint_stat; + u_int suni_reserved4; + u_int suni_e3_tran_fram_options; + u_int suni_e3_tran_stat_diag_options; + u_int suni_e3_tran_bip_8_err_mask; + u_int suni_e3_tran_maint_adapt_options; + u_int suni_ttb_ctrl; + u_int suni_ttb_trail_trace_id_stat; + u_int suni_ttb_ind_addr; + u_int suni_ttb_ind_data; + u_int suni_ttb_exp_payload_type; + u_int suni_ttb_payload_type_ctrl_stat; + u_int suni_pad5[0x7f-0x71]; + u_int suni_master_test; + u_int suni_pad6[0xff-0x80]; +}suni_pm7345_t; + +#define SUNI_PM7345_T suni_pm7345_t +#define SUNI_PM7345 0x20 /* Suni chip type */ +#define SUNI_PM5346 0x30 /* Suni chip type */ +/* + * SUNI_PM7345 Configuration + */ +#define SUNI_PM7345_CLB 0x01 /* Cell loopback */ +#define SUNI_PM7345_PLB 0x02 /* Payload loopback */ +#define SUNI_PM7345_DLB 0x04 /* Diagnostic loopback */ +#define SUNI_PM7345_LLB 0x80 /* Line loopback */ +#define SUNI_PM7345_E3ENBL 0x40 /* E3 enable bit */ +#define SUNI_PM7345_LOOPT 0x10 /* LOOPT enable bit */ +#define SUNI_PM7345_FIFOBP 0x20 /* FIFO bypass */ +#define SUNI_PM7345_FRMRBP 0x08 /* Framer bypass */ +/* + * DS3 FRMR Interrupt Enable + */ +#define SUNI_DS3_COFAE 0x80 /* Enable change of frame align */ +#define SUNI_DS3_REDE 0x40 /* Enable DS3 RED state intr */ +#define SUNI_DS3_CBITE 0x20 /* Enable Appl ID channel intr */ +#define SUNI_DS3_FERFE 0x10 /* Enable Far End Receive Failure intr*/ +#define SUNI_DS3_IDLE 0x08 /* Enable Idle signal intr */ +#define SUNI_DS3_AISE 0x04 /* Enable Alarm Indication signal intr*/ +#define SUNI_DS3_OOFE 0x02 /* Enable Out of frame intr */ +#define SUNI_DS3_LOSE 0x01 /* Enable Loss of signal intr */ + +/* + * DS3 FRMR Status + */ +#define SUNI_DS3_ACE 0x80 /* Additional Configuration Reg */ +#define SUNI_DS3_REDV 0x40 /* DS3 RED state */ +#define SUNI_DS3_CBITV 0x20 /* Application ID channel state */ +#define SUNI_DS3_FERFV 0x10 /* Far End Receive Failure state*/ +#define SUNI_DS3_IDLV 0x08 /* Idle signal state */ +#define SUNI_DS3_AISV 0x04 /* Alarm Indication signal state*/ +#define SUNI_DS3_OOFV 0x02 /* Out of frame state */ +#define SUNI_DS3_LOSV 0x01 /* Loss of signal state */ + +/* + * E3 FRMR Interrupt/Status + */ +#define SUNI_E3_CZDI 0x40 /* Consecutive Zeros indicator */ +#define SUNI_E3_LOSI 0x20 /* Loss of signal intr status */ +#define SUNI_E3_LCVI 0x10 /* Line code violation intr */ +#define SUNI_E3_COFAI 0x08 /* Change of frame align intr */ +#define SUNI_E3_OOFI 0x04 /* Out of frame intr status */ +#define SUNI_E3_LOS 0x02 /* Loss of signal state */ +#define SUNI_E3_OOF 0x01 /* Out of frame state */ + +/* + * E3 FRMR Maintenance Status + */ +#define SUNI_E3_AISD 0x80 /* Alarm Indication signal state*/ +#define SUNI_E3_FERF_RAI 0x40 /* FERF/RAI indicator */ +#define SUNI_E3_FEBE 0x20 /* Far End Block Error indicator*/ + +/* + * RXCP Control/Status + */ +#define SUNI_DS3_HCSPASS 0x80 /* Pass cell with HEC errors */ +#define SUNI_DS3_HCSDQDB 0x40 /* Control octets in HCS calc */ +#define SUNI_DS3_HCSADD 0x20 /* Add coset poly */ +#define SUNI_DS3_HCK 0x10 /* Control FIFO data path integ chk*/ +#define SUNI_DS3_BLOCK 0x08 /* Enable cell filtering */ +#define SUNI_DS3_DSCR 0x04 /* Disable payload descrambling */ +#define SUNI_DS3_OOCDV 0x02 /* Cell delineation state */ +#define SUNI_DS3_FIFORST 0x01 /* Cell FIFO reset */ + +/* + * RXCP Interrupt Enable/Status + */ +#define SUNI_DS3_OOCDE 0x80 /* Intr enable, change in CDS */ +#define SUNI_DS3_HCSE 0x40 /* Intr enable, corr HCS errors */ +#define SUNI_DS3_FIFOE 0x20 /* Intr enable, unco HCS errors */ +#define SUNI_DS3_OOCDI 0x10 /* SYNC state */ +#define SUNI_DS3_UHCSI 0x08 /* Uncorr. HCS errors detected */ +#define SUNI_DS3_COCAI 0x04 /* Corr. HCS errors detected */ +#define SUNI_DS3_FOVRI 0x02 /* FIFO overrun */ +#define SUNI_DS3_FUDRI 0x01 /* FIFO underrun */ + +///////////////////SUNI_PM7345 PHY DEFINE END ///////////////////////////// + +/* ia_eeprom define*/ +#define MEM_SIZE_MASK 0x000F /* mask of 4 bits defining memory size*/ +#define MEM_SIZE_128K 0x0000 /* board has 128k buffer */ +#define MEM_SIZE_512K 0x0001 /* board has 512K of buffer */ +#define MEM_SIZE_1M 0x0002 /* board has 1M of buffer */ + /* 0x3 to 0xF are reserved for future */ + +#define FE_MASK 0x00F0 /* mask of 4 bits defining FE type */ +#define FE_MULTI_MODE 0x0000 /* 155 MBit multimode fiber */ +#define FE_SINGLE_MODE 0x0010 /* 155 MBit single mode laser */ +#define FE_UTP_OPTION 0x0020 /* 155 MBit UTP front end */ + +#define NOVRAM_SIZE 64 +#define CMD_LEN 10 + +/*********** + * + * Switches and defines for header files. + * + * The following defines are used to turn on and off + * various options in the header files. Primarily useful + * for debugging. + * + ***********/ + +/* + * a list of the commands that can be sent to the NOVRAM + */ + +#define EXTEND 0x100 +#define IAWRITE 0x140 +#define IAREAD 0x180 +#define ERASE 0x1c0 + +#define EWDS 0x00 +#define WRAL 0x10 +#define ERAL 0x20 +#define EWEN 0x30 + +/* + * these bits duplicate the hw_flip.h register settings + * note: how the data in / out bits are defined in the flipper specification + */ + +#define NVCE 0x02 +#define NVSK 0x01 +#define NVDO 0x08 +#define NVDI 0x04 +/*********************** + * + * This define ands the value and the current config register and puts + * the result in the config register + * + ***********************/ + +#define CFG_AND(val) { \ + u32 t; \ + t = readl(iadev->reg+IPHASE5575_EEPROM_ACCESS); \ + t &= (val); \ + writel(t, iadev->reg+IPHASE5575_EEPROM_ACCESS); \ + } + +/*********************** + * + * This define ors the value and the current config register and puts + * the result in the config register + * + ***********************/ + +#define CFG_OR(val) { \ + u32 t; \ + t = readl(iadev->reg+IPHASE5575_EEPROM_ACCESS); \ + t |= (val); \ + writel(t, iadev->reg+IPHASE5575_EEPROM_ACCESS); \ + } + +/*********************** + * + * Send a command to the NOVRAM, the command is in cmd. + * + * clear CE and SK. Then assert CE. + * Clock each of the command bits out in the correct order with SK + * exit with CE still asserted + * + ***********************/ + +#define NVRAM_CMD(cmd) { \ + int i; \ + u_short c = cmd; \ + CFG_AND(~(NVCE|NVSK)); \ + CFG_OR(NVCE); \ + for (i=0; ireg+IPHASE5575_EEPROM_ACCESS); \ + value = (_t & NVDO) ? 1 : 0; \ + } + + +#endif /* IPHASE_H */ -- cgit v1.2.3