From 4622594766d0bc96d04079a96e13eb58f3f799f2 Mon Sep 17 00:00:00 2001 From: Zijun Hu Date: Mon, 25 Apr 2022 23:01:29 +0800 Subject: Bluetooth: btusb: add support for Qualcomm WCN785x Qualcomm WCN785x has PID/VID 0cf3/e700 as shown by /sys/kernel/debug/usb/devices: T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 8 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e700 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Zijun Hu Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/bluetooth/btusb.c') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 06a854a2507e..e6e28d3d1683 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -317,6 +317,11 @@ static const struct usb_device_id blacklist_table[] = { BTUSB_WIDEBAND_SPEECH | BTUSB_VALID_LE_STATES }, + /* QCA WCN785x chipset */ + { USB_DEVICE(0x0cf3, 0xe700), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + /* Broadcom BCM2035 */ { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 }, { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, @@ -3037,6 +3042,7 @@ static const struct qca_device_info qca_devices_table[] = { { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */ { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */ { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */ + { 0x00190200, 40, 4, 16 }, /* WCN785x 2.0 */ }; static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request, @@ -3327,11 +3333,11 @@ static int btusb_setup_qca(struct hci_dev *hdev) if (err < 0) return err; - /* WCN6855 2.1 will reset to apply firmware downloaded here, so + /* WCN6855 2.1 and later will reset to apply firmware downloaded here, so * wait ~100ms for reset Done then go ahead, otherwise, it maybe * cause potential enable failure. */ - if (info->rom_version == 0x00130201) + if (info->rom_version >= 0x00130201) msleep(QCA_BT_RESET_WAIT_MS); } -- cgit v1.2.3