From 43d3d092c7cbd1685e1c8ff25ae0b89b5b729388 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 7 Jun 2017 11:08:21 +0200 Subject: Bluetooth: hci_ll: Add support for the external clock Add support to manage the external clock provided to the WiLink combo chip as it's needed for any of the transport interfaces. To avoid breaking platforms not yet specifying the external clock, we make it optional. In case the clock is successfully fetched during ->probe(), let's manage it via the ->open|close() callbacks, to make sure the device get properly powered on/off. Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support") Signed-off-by: Ulf Hansson Tested-by: John Stultz Signed-off-by: Marcel Holtmann --- drivers/bluetooth/hci_ll.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers/bluetooth/hci_ll.c') diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c index 1b0487310117..2b16d48d82ee 100644 --- a/drivers/bluetooth/hci_ll.c +++ b/drivers/bluetooth/hci_ll.c @@ -48,6 +48,7 @@ #include #include #include +#include #include #include @@ -84,6 +85,7 @@ struct ll_device { struct hci_uart hu; struct serdev_device *serdev; struct gpio_desc *enable_gpio; + struct clk *ext_clk; }; struct ll_struct { @@ -146,8 +148,12 @@ static int ll_open(struct hci_uart *hu) hu->priv = ll; - if (hu->serdev) + if (hu->serdev) { + struct ll_device *lldev = serdev_device_get_drvdata(hu->serdev); serdev_device_open(hu->serdev); + if (!IS_ERR(lldev->ext_clk)) + clk_prepare_enable(lldev->ext_clk); + } return 0; } @@ -181,6 +187,8 @@ static int ll_close(struct hci_uart *hu) struct ll_device *lldev = serdev_device_get_drvdata(hu->serdev); gpiod_set_value_cansleep(lldev->enable_gpio, 0); + clk_disable_unprepare(lldev->ext_clk); + serdev_device_close(hu->serdev); } @@ -721,6 +729,10 @@ static int hci_ti_probe(struct serdev_device *serdev) if (IS_ERR(lldev->enable_gpio)) return PTR_ERR(lldev->enable_gpio); + lldev->ext_clk = devm_clk_get(&serdev->dev, "ext_clock"); + if (IS_ERR(lldev->ext_clk) && PTR_ERR(lldev->ext_clk) != -ENOENT) + return PTR_ERR(lldev->ext_clk); + of_property_read_u32(serdev->dev.of_node, "max-speed", &max_speed); hci_uart_set_speeds(hu, 115200, max_speed); -- cgit v1.2.3