From 3edc5782fb64c97946f4f321141cb4f46c9da825 Mon Sep 17 00:00:00 2001
From: Rasmus Moorats <xx@nns.ee>
Date: Thu, 18 Feb 2021 13:11:24 +0200
Subject: Bluetooth: btusb: support 0cb5:c547 Realtek 8822CE device

Some Xiaomi RedmiBook laptop models use the 0cb5:c547 USB identifier
for their Bluetooth device, so load the appropriate firmware for
Realtek 8822CE.

-Device(0cb5:c547) from /sys/kernel/debug/usb/devices
T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cb5 ProdID=c547 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Rasmus Moorats <xx@nns.ee>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 52683fd22e05..d15e3c71b348 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -455,6 +455,8 @@ static const struct usb_device_id blacklist_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0bda, 0xc123), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0cb5, 0xc547), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Silicon Wave based devices */
 	{ USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
-- 
cgit v1.2.3


From 201cf3976c065fc47ab260302d06690f73587df9 Mon Sep 17 00:00:00 2001
From: "mark-yw.chen" <mark-yw.chen@mediatek.com>
Date: Tue, 23 Feb 2021 14:27:40 +0800
Subject: Bluetooth: btusb: Fix incorrect type in assignment and uninitialized
 symbol

Warnings: drivers/bluetooth/btusb.c:3775 btusb_mtk_setup() error:
uninitialized symbol 'fw_version'.
-> add initial value for fw_version.

Warnings: sparse: sparse: incorrect type in assignment (different base
types)
-> add le32_to_cpu to fix incorrect type in assignment.

Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btusb.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index d15e3c71b348..0c20226d3b63 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3497,7 +3497,7 @@ static int btusb_mtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwnam
 	fw_ptr = fw->data;
 	fw_bin_ptr = fw_ptr;
 	globaldesc = (struct btmtk_global_desc *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE);
-	section_num = globaldesc->section_num;
+	section_num = le32_to_cpu(globaldesc->section_num);
 
 	for (i = 0; i < section_num; i++) {
 		first_block = 1;
@@ -3505,8 +3505,8 @@ static int btusb_mtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwnam
 		sectionmap = (struct btmtk_section_map *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE +
 			      MTK_FW_ROM_PATCH_GD_SIZE + MTK_FW_ROM_PATCH_SEC_MAP_SIZE * i);
 
-		section_offset = sectionmap->secoffset;
-		dl_size = sectionmap->bin_info_spec.dlsize;
+		section_offset = le32_to_cpu(sectionmap->secoffset);
+		dl_size = le32_to_cpu(sectionmap->bin_info_spec.dlsize);
 
 		if (dl_size > 0) {
 			retry = 20;
@@ -3742,7 +3742,7 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 	int err, status;
 	u32 dev_id;
 	char fw_bin_name[64];
-	u32 fw_version;
+	u32 fw_version = 0;
 	u8 param;
 
 	calltime = ktime_get();
-- 
cgit v1.2.3


From 2f40796671f03c0eb193f44c7d4a6855ab9b30f6 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Fri, 5 Mar 2021 19:37:36 +0100
Subject: Bluetooth: btbcm: Obtain and handle reset GPIO

Obtain and drive the optional reset GPIO line if this is
not hardwired in the platform. This is needed on the
Samsung GT-I9070 mobile phone.

The invers of power is used, this should be OK to apply
simultaneously as the power signal according to
figures 47-51 on pages 159-161 in the BCM4330 datasheet.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/hci_bcm.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 3764ceb6fa0d..93a4c03a8787 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -68,6 +68,8 @@ struct bcm_device_data {
  *	deassert = Bluetooth device may sleep when sleep criteria are met
  * @shutdown: BT_REG_ON pin,
  *	power up or power down Bluetooth device internal regulators
+ * @reset: BT_RST_N pin,
+ *	active low resets the Bluetooth logic core
  * @set_device_wakeup: callback to toggle BT_WAKE pin
  *	either by accessing @device_wakeup or by calling @btlp
  * @set_shutdown: callback to toggle BT_REG_ON pin
@@ -101,6 +103,7 @@ struct bcm_device {
 	const char		*name;
 	struct gpio_desc	*device_wakeup;
 	struct gpio_desc	*shutdown;
+	struct gpio_desc	*reset;
 	int			(*set_device_wakeup)(struct bcm_device *, bool);
 	int			(*set_shutdown)(struct bcm_device *, bool);
 #ifdef CONFIG_ACPI
@@ -985,6 +988,15 @@ static int bcm_gpio_set_device_wakeup(struct bcm_device *dev, bool awake)
 static int bcm_gpio_set_shutdown(struct bcm_device *dev, bool powered)
 {
 	gpiod_set_value_cansleep(dev->shutdown, powered);
+	if (dev->reset)
+		/*
+		 * The reset line is asserted on powerdown and deasserted
+		 * on poweron so the inverse of powered is used. Notice
+		 * that the GPIO line BT_RST_N needs to be specified as
+		 * active low in the device tree or similar system
+		 * description.
+		 */
+		gpiod_set_value_cansleep(dev->reset, !powered);
 	return 0;
 }
 
@@ -1050,6 +1062,11 @@ static int bcm_get_resources(struct bcm_device *dev)
 	if (IS_ERR(dev->shutdown))
 		return PTR_ERR(dev->shutdown);
 
+	dev->reset = devm_gpiod_get_optional(dev->dev, "reset",
+					     GPIOD_OUT_LOW);
+	if (IS_ERR(dev->reset))
+		return PTR_ERR(dev->reset);
+
 	dev->set_device_wakeup = bcm_gpio_set_device_wakeup;
 	dev->set_shutdown = bcm_gpio_set_shutdown;
 
-- 
cgit v1.2.3


From 62acbbb661a1a7eb3ee155fe029a4901f4d5cc45 Mon Sep 17 00:00:00 2001
From: Kiran K <kiran.k@intel.com>
Date: Mon, 8 Mar 2021 16:44:54 +0530
Subject: Bluetooth: btusb: print firmware file name on error loading firmware

print the firmware file name on error loading from fie system

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btusb.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 0c20226d3b63..0d355bb45e08 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2540,7 +2540,8 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 	btusb_setup_intel_newgen_get_fw_name(ver, fwname, sizeof(fwname), "sfi");
 	err = request_firmware(&fw, fwname, &hdev->dev);
 	if (err < 0) {
-		bt_dev_err(hdev, "Failed to load Intel firmware file (%d)", err);
+		bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
+			   fwname, err);
 		return err;
 	}
 
@@ -2734,7 +2735,8 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
 
 	err = request_firmware(&fw, fwname, &hdev->dev);
 	if (err < 0) {
-		bt_dev_err(hdev, "Failed to load Intel firmware file (%d)", err);
+		bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
+			   fwname, err);
 		return err;
 	}
 
-- 
cgit v1.2.3


From d00745da644d42c2f97293eb3fe19cfd5c0b073c Mon Sep 17 00:00:00 2001
From: Kiran K <kiran.k@intel.com>
Date: Mon, 8 Mar 2021 18:46:01 +0530
Subject: Bluetooth: btintel: Fix offset calculation boot address parameter

Boot address parameter was not getting updated properly
due to wrong offset

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btintel.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 88ce5f0ffc4b..fa97324454ea 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -863,7 +863,8 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
 			/* The boot parameter is the first 32-bit value
 			 * and rest of 3 octets are reserved.
 			 */
-			*boot_param = get_unaligned_le32(fw_ptr + sizeof(*cmd));
+			*boot_param = get_unaligned_le32(fw_ptr + frag_len +
+							 sizeof(*cmd));
 
 			bt_dev_dbg(hdev, "boot_param=0x%x", *boot_param);
 		}
-- 
cgit v1.2.3


From c1a74160eaf1ac218733b371158432b52601beff Mon Sep 17 00:00:00 2001
From: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Date: Thu, 11 Mar 2021 12:33:40 +0530
Subject: Bluetooth: hci_qca: Add device_may_wakeup support

Based on device may wakeup status, Bluez stack will enable/disable
passive scanning with whitelist in BT controller while suspending.
As interrupt from BT SoC is handled by UART driver,we need to use
device handle of UART driver to get the status of device may wakeup

Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/hci_qca.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index de36af63e182..73af901c2032 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1571,6 +1571,20 @@ static void qca_cmd_timeout(struct hci_dev *hdev)
 	mutex_unlock(&qca->hci_memdump_lock);
 }
 
+static bool qca_prevent_wake(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	bool wakeup;
+
+	/* UART driver handles the interrupt from BT SoC.So we need to use
+	 * device handle of UART driver to get the status of device may wakeup.
+	 */
+	wakeup = device_may_wakeup(hu->serdev->ctrl->dev.parent);
+	bt_dev_dbg(hu->hdev, "wakeup status : %d", wakeup);
+
+	return !wakeup;
+}
+
 static int qca_wcn3990_init(struct hci_uart *hu)
 {
 	struct qca_serdev *qcadev;
@@ -1721,6 +1735,7 @@ retry:
 		qca_debugfs_init(hdev);
 		hu->hdev->hw_error = qca_hw_error;
 		hu->hdev->cmd_timeout = qca_cmd_timeout;
+		hu->hdev->prevent_wake = qca_prevent_wake;
 	} else if (ret == -ENOENT) {
 		/* No patch/nvm-config found, run with original fw/config */
 		set_bit(QCA_ROM_FW, &qca->flags);
-- 
cgit v1.2.3


From 81534d4835de52758176909f3e446f1d49809241 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Thu, 18 Mar 2021 09:43:09 +0100
Subject: Bluetooth: btbcm: Add BCM4330 and BCM4334 compatibles

Add the missing brcm,bcm4330-bt and brcm,bcm4334-bt to the
match table so device trees can use this compatible as well
and not need to use the fallback brcm,bcm4329-bt.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/hci_bcm.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 93a4c03a8787..3cd57fc56ade 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1499,6 +1499,8 @@ static struct bcm_device_data bcm43438_device_data = {
 static const struct of_device_id bcm_bluetooth_of_match[] = {
 	{ .compatible = "brcm,bcm20702a1" },
 	{ .compatible = "brcm,bcm4329-bt" },
+	{ .compatible = "brcm,bcm4330-bt" },
+	{ .compatible = "brcm,bcm4334-bt" },
 	{ .compatible = "brcm,bcm4345c5" },
 	{ .compatible = "brcm,bcm4330-bt" },
 	{ .compatible = "brcm,bcm43438-bt", .data = &bcm43438_device_data },
-- 
cgit v1.2.3


From 07528783c7da0b711385f0033a836453b5ec0c9c Mon Sep 17 00:00:00 2001
From: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Date: Mon, 22 Mar 2021 06:30:51 +0530
Subject: Bluetooth: hci_qca: Mundane typo fix

s/packat/packet/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/hci_qca.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 73af901c2032..0a0056912d51 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1066,7 +1066,7 @@ static void qca_controller_memdump(struct work_struct *work)
 		 * packets in the buffer.
 		 */
 		/* For QCA6390, controller does not lost packets but
-		 * sequence number field of packat sometimes has error
+		 * sequence number field of packet sometimes has error
 		 * bits, so skip this checking for missing packet.
 		 */
 		while ((seq_no > qca_memdump->current_seq_no + 1) &&
-- 
cgit v1.2.3


From ac0565462e330a2b762ca5849a4140b29d725786 Mon Sep 17 00:00:00 2001
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Tue, 23 Mar 2021 11:58:56 -0700
Subject: Bluetooth: btintel: Check firmware version before download

This checks the firmware build number, week and year against the
repective loaded version. If details are a match, skip the download
process.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btintel.c   | 106 +++++++++++++++++++++++++++++++++---------
 drivers/bluetooth/btintel.h   |   5 +-
 drivers/bluetooth/btusb.c     |  18 ++++++-
 drivers/bluetooth/hci_intel.c |   7 ++-
 4 files changed, 109 insertions(+), 27 deletions(-)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index fa97324454ea..3ff698a0bd25 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -24,6 +24,14 @@
 #define ECDSA_OFFSET		644
 #define ECDSA_HEADER_LEN	320
 
+#define CMD_WRITE_BOOT_PARAMS	0xfc0e
+struct cmd_write_boot_params {
+	u32 boot_addr;
+	u8  fw_build_num;
+	u8  fw_build_ww;
+	u8  fw_build_yy;
+} __packed;
+
 int btintel_check_bdaddr(struct hci_dev *hdev)
 {
 	struct hci_rp_read_bd_addr *bda;
@@ -841,7 +849,7 @@ static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev,
 
 static int btintel_download_firmware_payload(struct hci_dev *hdev,
 					     const struct firmware *fw,
-					     u32 *boot_param, size_t offset)
+					     size_t offset)
 {
 	int err;
 	const u8 *fw_ptr;
@@ -854,21 +862,6 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
 	while (fw_ptr - fw->data < fw->size) {
 		struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
 
-		/* Each SKU has a different reset parameter to use in the
-		 * HCI_Intel_Reset command and it is embedded in the firmware
-		 * data. So, instead of using static value per SKU, check
-		 * the firmware data and save it for later use.
-		 */
-		if (le16_to_cpu(cmd->opcode) == 0xfc0e) {
-			/* The boot parameter is the first 32-bit value
-			 * and rest of 3 octets are reserved.
-			 */
-			*boot_param = get_unaligned_le32(fw_ptr + frag_len +
-							 sizeof(*cmd));
-
-			bt_dev_dbg(hdev, "boot_param=0x%x", *boot_param);
-		}
-
 		frag_len += sizeof(*cmd) + cmd->plen;
 
 		/* The parameter length of the secure send command requires
@@ -897,28 +890,101 @@ done:
 	return err;
 }
 
+static bool btintel_firmware_version(struct hci_dev *hdev,
+				     u8 num, u8 ww, u8 yy,
+				     const struct firmware *fw,
+				     u32 *boot_addr)
+{
+	const u8 *fw_ptr;
+
+	fw_ptr = fw->data;
+
+	while (fw_ptr - fw->data < fw->size) {
+		struct hci_command_hdr *cmd = (void *)(fw_ptr);
+
+		/* Each SKU has a different reset parameter to use in the
+		 * HCI_Intel_Reset command and it is embedded in the firmware
+		 * data. So, instead of using static value per SKU, check
+		 * the firmware data and save it for later use.
+		 */
+		if (le16_to_cpu(cmd->opcode) == CMD_WRITE_BOOT_PARAMS) {
+			struct cmd_write_boot_params *params;
+
+			params = (void *)(fw_ptr + sizeof(*cmd));
+
+			bt_dev_info(hdev, "Boot Address: 0x%x",
+				    le32_to_cpu(params->boot_addr));
+
+			bt_dev_info(hdev, "Firmware Version: %u-%u.%u",
+				    params->fw_build_num, params->fw_build_ww,
+				    params->fw_build_yy);
+
+			return (num == params->fw_build_num &&
+				ww == params->fw_build_ww &&
+				yy == params->fw_build_yy);
+		}
+
+		fw_ptr += sizeof(*cmd) + cmd->plen;
+	}
+
+	return false;
+}
+
 int btintel_download_firmware(struct hci_dev *hdev,
+			      struct intel_version *ver,
 			      const struct firmware *fw,
 			      u32 *boot_param)
 {
 	int err;
 
+	/* SfP and WsP don't seem to update the firmware version on file
+	 * so version checking is currently not possible.
+	 */
+	switch (ver->hw_variant) {
+	case 0x0b:	/* SfP */
+	case 0x0c:	/* WsP */
+		/* Skip version checking */
+		break;
+	default:
+		/* Skip download if firmware has the same version */
+		if (btintel_firmware_version(hdev, ver->fw_build_num,
+					     ver->fw_build_ww, ver->fw_build_yy,
+					     fw, boot_param)) {
+			bt_dev_info(hdev, "Firmware already loaded");
+			/* Return -EALREADY to indicate that the firmware has
+			 * already been loaded.
+			 */
+			return -EALREADY;
+		}
+	}
+
 	err = btintel_sfi_rsa_header_secure_send(hdev, fw);
 	if (err)
 		return err;
 
-	return btintel_download_firmware_payload(hdev, fw, boot_param,
-						 RSA_HEADER_LEN);
+	return btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
 }
 EXPORT_SYMBOL_GPL(btintel_download_firmware);
 
 int btintel_download_firmware_newgen(struct hci_dev *hdev,
+				     struct intel_version_tlv *ver,
 				     const struct firmware *fw, u32 *boot_param,
 				     u8 hw_variant, u8 sbe_type)
 {
 	int err;
 	u32 css_header_ver;
 
+	/* Skip download if firmware has the same version */
+	if (btintel_firmware_version(hdev, ver->min_fw_build_nn,
+				     ver->min_fw_build_cw, ver->min_fw_build_yy,
+				     fw, boot_param)) {
+		bt_dev_info(hdev, "Firmware already loaded");
+		/* Return -EALREADY to indicate that firmware has already been
+		 * loaded.
+		 */
+		return -EALREADY;
+	}
+
 	/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
 	 * only RSA secure boot engine. Hence, the corresponding sfi file will
 	 * have RSA header of 644 bytes followed by Command Buffer.
@@ -948,7 +1014,7 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 		if (err)
 			return err;
 
-		err = btintel_download_firmware_payload(hdev, fw, boot_param, RSA_HEADER_LEN);
+		err = btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
 		if (err)
 			return err;
 	} else if (hw_variant >= 0x17) {
@@ -969,7 +1035,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 				return err;
 
 			err = btintel_download_firmware_payload(hdev, fw,
-								boot_param,
 								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
 			if (err)
 				return err;
@@ -979,7 +1044,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 				return err;
 
 			err = btintel_download_firmware_payload(hdev, fw,
-								boot_param,
 								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
 			if (err)
 				return err;
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 6511b091caf5..51f1f2c883b4 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -163,9 +163,10 @@ struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
 int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param);
 int btintel_read_boot_params(struct hci_dev *hdev,
 			     struct intel_boot_params *params);
-int btintel_download_firmware(struct hci_dev *dev, const struct firmware *fw,
-			      u32 *boot_param);
+int btintel_download_firmware(struct hci_dev *dev, struct intel_version *ver,
+			      const struct firmware *fw, u32 *boot_param);
 int btintel_download_firmware_newgen(struct hci_dev *hdev,
+				     struct intel_version_tlv *ver,
 				     const struct firmware *fw,
 				     u32 *boot_param, u8 hw_variant,
 				     u8 sbe_type);
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 0d355bb45e08..de220ab7f231 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2557,10 +2557,17 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 	set_bit(BTUSB_DOWNLOADING, &data->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware_newgen(hdev, fw, boot_param,
+	err = btintel_download_firmware_newgen(hdev, ver, fw, boot_param,
 					       INTEL_HW_VARIANT(ver->cnvi_bt),
 					       ver->sbe_type);
 	if (err < 0) {
+		if (err == -EALREADY) {
+			/* Firmware has already been loaded */
+			set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
+			err = 0;
+			goto done;
+		}
+
 		/* When FW download fails, send Intel Reset to retry
 		 * FW download.
 		 */
@@ -2752,8 +2759,15 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
 	set_bit(BTUSB_DOWNLOADING, &data->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware(hdev, fw, boot_param);
+	err = btintel_download_firmware(hdev, ver, fw, boot_param);
 	if (err < 0) {
+		if (err == -EALREADY) {
+			/* Firmware has already been loaded */
+			set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
+			err = 0;
+			goto done;
+		}
+
 		/* When FW download fails, send Intel Reset to retry
 		 * FW download.
 		 */
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index b20a40fab83e..7249b91d9b91 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -735,7 +735,7 @@ static int intel_setup(struct hci_uart *hu)
 	set_bit(STATE_DOWNLOADING, &intel->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware(hdev, fw, &boot_param);
+	err = btintel_download_firmware(hdev, &ver, fw, &boot_param);
 	if (err < 0)
 		goto done;
 
@@ -784,7 +784,10 @@ static int intel_setup(struct hci_uart *hu)
 done:
 	release_firmware(fw);
 
-	if (err < 0)
+	/* Check if there was an error and if is not -EALREADY which means the
+	 * firmware has already been loaded.
+	 */
+	if (err < 0 && err != -EALREADY)
 		return err;
 
 	/* We need to restore the default speed before Intel reset */
-- 
cgit v1.2.3


From 9b16bfbf411664697817385096ce59df453e1fb6 Mon Sep 17 00:00:00 2001
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Tue, 23 Mar 2021 11:58:57 -0700
Subject: Bluetooth: btintel: Move operational checks after version check

In order to allow new firmware to load, it first needs to check if the
firmware version on file matches the one loaded if it doesn't, then it
needs to revert to bootloader mode in order to load the new firmware.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btintel.c | 22 +++++++++++++++
 drivers/bluetooth/btusb.c   | 68 ++++++++++++++++-----------------------------
 2 files changed, 46 insertions(+), 44 deletions(-)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 3ff698a0bd25..13bc93a986c7 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -958,6 +958,17 @@ int btintel_download_firmware(struct hci_dev *hdev,
 		}
 	}
 
+	/* The firmware variant determines if the device is in bootloader
+	 * mode or is running operational firmware. The value 0x06 identifies
+	 * the bootloader and the value 0x23 identifies the operational
+	 * firmware.
+	 *
+	 * If the firmware version has changed that means it needs to be reset
+	 * to bootloader when operational so the new firmware can be loaded.
+	 */
+	if (ver->fw_variant == 0x23)
+		return -EINVAL;
+
 	err = btintel_sfi_rsa_header_secure_send(hdev, fw);
 	if (err)
 		return err;
@@ -985,6 +996,17 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 		return -EALREADY;
 	}
 
+	/* The firmware variant determines if the device is in bootloader
+	 * mode or is running operational firmware. The value 0x01 identifies
+	 * the bootloader and the value 0x03 identifies the operational
+	 * firmware.
+	 *
+	 * If the firmware version has changed that means it needs to be reset
+	 * to bootloader when operational so the new firmware can be loaded.
+	 */
+	if (ver->img_type == 0x03)
+		return -EINVAL;
+
 	/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
 	 * only RSA secure boot engine. Hence, the corresponding sfi file will
 	 * have RSA header of 644 bytes followed by Command Buffer.
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index de220ab7f231..a30f7ea9be36 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2402,11 +2402,17 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
 	return -EILSEQ;
 }
 
-static bool btusb_setup_intel_new_get_fw_name(struct intel_version *ver,
+static int btusb_setup_intel_new_get_fw_name(struct intel_version *ver,
 					     struct intel_boot_params *params,
 					     char *fw_name, size_t len,
 					     const char *suffix)
 {
+	/* The hardware platform number has a fixed value of 0x37 and
+	 * for now only accept this single value.
+	 */
+	if (ver->hw_platform != 0x37)
+		return -EINVAL;
+
 	switch (ver->hw_variant) {
 	case 0x0b:	/* SfP */
 	case 0x0c:	/* WsP */
@@ -2426,9 +2432,10 @@ static bool btusb_setup_intel_new_get_fw_name(struct intel_version *ver,
 			suffix);
 		break;
 	default:
-		return false;
+		return -EINVAL;
 	}
-	return true;
+
+	return 0;
 }
 
 static void btusb_setup_intel_newgen_get_fw_name(const struct intel_version_tlv *ver_tlv,
@@ -2483,7 +2490,6 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 	if (ver->img_type == 0x03) {
 		clear_bit(BTUSB_BOOTLOADER, &data->flags);
 		btintel_check_bdaddr(hdev);
-		return 0;
 	}
 
 	/* Check for supported iBT hardware variants of this firmware
@@ -2628,35 +2634,6 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
 	if (!ver || !params)
 		return -EINVAL;
 
-	/* The hardware platform number has a fixed value of 0x37 and
-	 * for now only accept this single value.
-	 */
-	if (ver->hw_platform != 0x37) {
-		bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
-			   ver->hw_platform);
-		return -EINVAL;
-	}
-
-	/* Check for supported iBT hardware variants of this firmware
-	 * loading method.
-	 *
-	 * This check has been put in place to ensure correct forward
-	 * compatibility options when newer hardware variants come along.
-	 */
-	switch (ver->hw_variant) {
-	case 0x0b:	/* SfP */
-	case 0x0c:	/* WsP */
-	case 0x11:	/* JfP */
-	case 0x12:	/* ThP */
-	case 0x13:	/* HrP */
-	case 0x14:	/* CcP */
-		break;
-	default:
-		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
-			   ver->hw_variant);
-		return -EINVAL;
-	}
-
 	btintel_version_info(hdev, ver);
 
 	/* The firmware variant determines if the device is in bootloader
@@ -2675,16 +2652,18 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
 	if (ver->fw_variant == 0x23) {
 		clear_bit(BTUSB_BOOTLOADER, &data->flags);
 		btintel_check_bdaddr(hdev);
-		return 0;
-	}
 
-	/* If the device is not in bootloader mode, then the only possible
-	 * choice is to return an error and abort the device initialization.
-	 */
-	if (ver->fw_variant != 0x06) {
-		bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
-			   ver->fw_variant);
-		return -ENODEV;
+		/* SfP and WsP don't seem to update the firmware version on file
+		 * so version checking is currently possible.
+		 */
+		switch (ver->hw_variant) {
+		case 0x0b:	/* SfP */
+		case 0x0c:	/* WsP */
+			return 0;
+		}
+
+		/* Proceed to download to check if the version matches */
+		goto download;
 	}
 
 	/* Read the secure boot parameters to identify the operating
@@ -2712,6 +2691,7 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
 		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
 	}
 
+download:
 	/* With this Intel bootloader only the hardware variant and device
 	 * revision information are used to select the right firmware for SfP
 	 * and WsP.
@@ -2735,7 +2715,7 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
 	 */
 	err = btusb_setup_intel_new_get_fw_name(ver, params, fwname,
 						sizeof(fwname), "sfi");
-	if (!err) {
+	if (err < 0) {
 		bt_dev_err(hdev, "Unsupported Intel firmware naming");
 		return -EINVAL;
 	}
@@ -2908,7 +2888,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	err = btusb_setup_intel_new_get_fw_name(&ver, &params, ddcname,
 						sizeof(ddcname), "ddc");
 
-	if (!err) {
+	if (err < 0) {
 		bt_dev_err(hdev, "Unsupported Intel firmware naming");
 	} else {
 		/* Once the device is running in operational mode, it needs to
-- 
cgit v1.2.3


From 0a460d8fe2db6887169a19b048ea0c90f8bdc3b7 Mon Sep 17 00:00:00 2001
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Tue, 23 Mar 2021 11:58:58 -0700
Subject: Bluetooth: btintel: Consolidate intel_version_tlv parsing

This moves version checks of intel_version_tlv() to btintel_version_info_tlv().

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btintel.c | 50 ++++++++++++++++++++++++++++++++++++----
 drivers/bluetooth/btintel.h |  7 +++---
 drivers/bluetooth/btusb.c   | 56 +++------------------------------------------
 3 files changed, 53 insertions(+), 60 deletions(-)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 13bc93a986c7..bb2546c4374a 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -372,10 +372,53 @@ int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver)
 }
 EXPORT_SYMBOL_GPL(btintel_read_version);
 
-void btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
+int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
 {
 	const char *variant;
 
+	/* The hardware platform number has a fixed value of 0x37 and
+	 * for now only accept this single value.
+	 */
+	if (INTEL_HW_PLATFORM(version->cnvi_bt) != 0x37) {
+		bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
+			   INTEL_HW_PLATFORM(version->cnvi_bt));
+		return -EINVAL;
+	}
+
+	/* Check for supported iBT hardware variants of this firmware
+	 * loading method.
+	 *
+	 * This check has been put in place to ensure correct forward
+	 * compatibility options when newer hardware variants come along.
+	 */
+	switch (INTEL_HW_VARIANT(version->cnvi_bt)) {
+	case 0x17:	/* TyP */
+	case 0x18:	/* Slr */
+	case 0x19:	/* Slr-F */
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported Intel hardware variant (0x%x)",
+			   INTEL_HW_VARIANT(version->cnvi_bt));
+		return -EINVAL;
+	}
+
+	/* It is required that every single firmware fragment is acknowledged
+	 * with a command complete event. If the boot parameters indicate
+	 * that this bootloader does not send them, then abort the setup.
+	 */
+	if (version->limited_cce != 0x00) {
+		bt_dev_err(hdev, "Unsupported Intel firmware loading method (0x%x)",
+			   version->limited_cce);
+		return -EINVAL;
+	}
+
+	/* Secure boot engine type should be either 1 (ECDSA) or 0 (RSA) */
+	if (version->sbe_type > 0x01) {
+		bt_dev_err(hdev, "Unsupported Intel secure boot engine type (0x%x)",
+			   version->sbe_type);
+		return -EINVAL;
+	}
+
 	switch (version->img_type) {
 	case 0x01:
 		variant = "Bootloader";
@@ -397,15 +440,14 @@ void btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *ve
 		break;
 	default:
 		bt_dev_err(hdev, "Unsupported image type(%02x)", version->img_type);
-		goto done;
+		return -EINVAL;
 	}
 
 	bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u", variant,
 		    2000 + (version->timestamp >> 8), version->timestamp & 0xff,
 		    version->build_type, version->build_num);
 
-done:
-	return;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(btintel_version_info_tlv);
 
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 51f1f2c883b4..56f30eaa1e3c 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -149,7 +149,7 @@ int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable);
 void btintel_hw_error(struct hci_dev *hdev, u8 code);
 
 void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver);
-void btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version);
+int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version);
 int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
 			const void *param);
 int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name);
@@ -216,9 +216,10 @@ static inline void btintel_version_info(struct hci_dev *hdev,
 {
 }
 
-static inline void btintel_version_info_tlv(struct hci_dev *hdev,
-					    struct intel_version_tlv *version)
+static inline int btintel_version_info_tlv(struct hci_dev *hdev,
+					   struct intel_version_tlv *version)
 {
+	return -EOPNOTSUPP;
 }
 
 static inline int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type,
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a30f7ea9be36..f163f174185b 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2465,15 +2465,6 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 	if (!ver || !boot_param)
 		return -EINVAL;
 
-	/* The hardware platform number has a fixed value of 0x37 and
-	 * for now only accept this single value.
-	 */
-	if (INTEL_HW_PLATFORM(ver->cnvi_bt) != 0x37) {
-		bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
-			   INTEL_HW_PLATFORM(ver->cnvi_bt));
-		return -EINVAL;
-	}
-
 	/* The firmware variant determines if the device is in bootloader
 	 * mode or is running operational firmware. The value 0x03 identifies
 	 * the bootloader and the value 0x23 identifies the operational
@@ -2492,49 +2483,6 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 		btintel_check_bdaddr(hdev);
 	}
 
-	/* Check for supported iBT hardware variants of this firmware
-	 * loading method.
-	 *
-	 * This check has been put in place to ensure correct forward
-	 * compatibility options when newer hardware variants come along.
-	 */
-	switch (INTEL_HW_VARIANT(ver->cnvi_bt)) {
-	case 0x17:	/* TyP */
-	case 0x18:	/* Slr */
-	case 0x19:	/* Slr-F */
-		break;
-	default:
-		bt_dev_err(hdev, "Unsupported Intel hardware variant (0x%x)",
-			   INTEL_HW_VARIANT(ver->cnvi_bt));
-		return -EINVAL;
-	}
-
-	/* If the device is not in bootloader mode, then the only possible
-	 * choice is to return an error and abort the device initialization.
-	 */
-	if (ver->img_type != 0x01) {
-		bt_dev_err(hdev, "Unsupported Intel firmware variant (0x%x)",
-			   ver->img_type);
-		return -ENODEV;
-	}
-
-	/* It is required that every single firmware fragment is acknowledged
-	 * with a command complete event. If the boot parameters indicate
-	 * that this bootloader does not send them, then abort the setup.
-	 */
-	if (ver->limited_cce != 0x00) {
-		bt_dev_err(hdev, "Unsupported Intel firmware loading method (0x%x)",
-			   ver->limited_cce);
-		return -EINVAL;
-	}
-
-	/* Secure boot engine type should be either 1 (ECDSA) or 0 (RSA) */
-	if (ver->sbe_type > 0x01) {
-		bt_dev_err(hdev, "Unsupported Intel secure boot engine type (0x%x)",
-			   ver->sbe_type);
-		return -EINVAL;
-	}
-
 	/* If the OTP has no valid Bluetooth device address, then there will
 	 * also be no valid address for the operational firmware.
 	 */
@@ -2972,7 +2920,9 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
 		return err;
 	}
 
-	btintel_version_info_tlv(hdev, &version);
+	err = btintel_version_info_tlv(hdev, &version);
+	if (err)
+		return err;
 
 	err = btusb_intel_download_firmware_newgen(hdev, &version, &boot_param);
 	if (err)
-- 
cgit v1.2.3


From d68903da4e220d1e6b7c6ecdb853c36144c6acc9 Mon Sep 17 00:00:00 2001
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Tue, 23 Mar 2021 11:58:59 -0700
Subject: Bluetooth: btintel: Consolidate intel_version parsing

This moves version checks of intel_version() to btintel_version_info().

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btintel.c | 36 ++++++++++++++++++++++++++++++++++--
 drivers/bluetooth/btintel.h |  7 ++++---
 drivers/bluetooth/btusb.c   | 12 ++++--------
 3 files changed, 42 insertions(+), 13 deletions(-)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index bb2546c4374a..bddaa4f32566 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -216,10 +216,39 @@ void btintel_hw_error(struct hci_dev *hdev, u8 code)
 }
 EXPORT_SYMBOL_GPL(btintel_hw_error);
 
-void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
+int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
 {
 	const char *variant;
 
+	/* The hardware platform number has a fixed value of 0x37 and
+	 * for now only accept this single value.
+	 */
+	if (ver->hw_platform != 0x37) {
+		bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
+			   ver->hw_platform);
+		return -EINVAL;
+	}
+
+	/* Check for supported iBT hardware variants of this firmware
+	 * loading method.
+	 *
+	 * This check has been put in place to ensure correct forward
+	 * compatibility options when newer hardware variants come along.
+	 */
+	switch (ver->hw_variant) {
+	case 0x0b:      /* SfP */
+	case 0x0c:      /* WsP */
+	case 0x11:      /* JfP */
+	case 0x12:      /* ThP */
+	case 0x13:      /* HrP */
+	case 0x14:      /* CcP */
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
+			   ver->hw_variant);
+		return -EINVAL;
+	}
+
 	switch (ver->fw_variant) {
 	case 0x06:
 		variant = "Bootloader";
@@ -228,13 +257,16 @@ void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
 		variant = "Firmware";
 		break;
 	default:
-		return;
+		bt_dev_err(hdev, "Unsupported firmware variant(%02x)", ver->fw_variant);
+		return -EINVAL;
 	}
 
 	bt_dev_info(hdev, "%s revision %u.%u build %u week %u %u",
 		    variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f,
 		    ver->fw_build_num, ver->fw_build_ww,
 		    2000 + ver->fw_build_yy);
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(btintel_version_info);
 
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 56f30eaa1e3c..d184064a5e7c 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -148,7 +148,7 @@ int btintel_set_diag(struct hci_dev *hdev, bool enable);
 int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable);
 void btintel_hw_error(struct hci_dev *hdev, u8 code);
 
-void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver);
+int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver);
 int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version);
 int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
 			const void *param);
@@ -211,9 +211,10 @@ static inline void btintel_hw_error(struct hci_dev *hdev, u8 code)
 {
 }
 
-static inline void btintel_version_info(struct hci_dev *hdev,
-					struct intel_version *ver)
+static inline int btintel_version_info(struct hci_dev *hdev,
+				       struct intel_version *ver)
 {
+	return -EOPNOTSUPP;
 }
 
 static inline int btintel_version_info_tlv(struct hci_dev *hdev,
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index f163f174185b..2d3498b74296 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2407,12 +2407,6 @@ static int btusb_setup_intel_new_get_fw_name(struct intel_version *ver,
 					     char *fw_name, size_t len,
 					     const char *suffix)
 {
-	/* The hardware platform number has a fixed value of 0x37 and
-	 * for now only accept this single value.
-	 */
-	if (ver->hw_platform != 0x37)
-		return -EINVAL;
-
 	switch (ver->hw_variant) {
 	case 0x0b:	/* SfP */
 	case 0x0c:	/* WsP */
@@ -2582,8 +2576,6 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
 	if (!ver || !params)
 		return -EINVAL;
 
-	btintel_version_info(hdev, ver);
-
 	/* The firmware variant determines if the device is in bootloader
 	 * mode or is running operational firmware. The value 0x06 identifies
 	 * the bootloader and the value 0x23 identifies the operational
@@ -2776,6 +2768,10 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 		return err;
 	}
 
+	err = btintel_version_info(hdev, &ver);
+	if (err)
+		return err;
+
 	err = btusb_intel_download_firmware(hdev, &ver, &params, &boot_param);
 	if (err)
 		return err;
-- 
cgit v1.2.3


From 21e31c6501d9c24dae8869628ccc80b36f2a3d01 Mon Sep 17 00:00:00 2001
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Tue, 23 Mar 2021 11:59:00 -0700
Subject: Bluetooth: btusb: Consolidate code for waiting firmware download

This moves duplicated code for waiting firmware download completion to
a function that can be reused.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btusb.c | 108 +++++++++++++++++++++-------------------------
 1 file changed, 48 insertions(+), 60 deletions(-)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2d3498b74296..dcdc434cf794 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2447,6 +2447,44 @@ static void btusb_setup_intel_newgen_get_fw_name(const struct intel_version_tlv
 		 suffix);
 }
 
+static int btusb_download_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	ktime_t delta, rettime;
+	unsigned long long duration;
+	int err;
+
+	set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
+
+	bt_dev_info(hdev, "Waiting for firmware download to complete");
+
+	err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(msec));
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Firmware loading interrupted");
+		return err;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Firmware loading timeout");
+		return -ETIMEDOUT;
+	}
+
+	if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
+		bt_dev_err(hdev, "Firmware loading failed");
+		return -ENOEXEC;
+	}
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
+
+	return 0;
+}
+
 static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 						struct intel_version_tlv *ver,
 						u32 *boot_param)
@@ -2455,6 +2493,7 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 	char fwname[64];
 	int err;
 	struct btusb_data *data = hci_get_drvdata(hdev);
+	ktime_t calltime;
 
 	if (!ver || !boot_param)
 		return -EINVAL;
@@ -2502,6 +2541,8 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 		goto done;
 	}
 
+	calltime = ktime_get();
+
 	set_bit(BTUSB_DOWNLOADING, &data->flags);
 
 	/* Start firmware downloading and get boot parameter */
@@ -2522,9 +2563,6 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 		btintel_reset_to_bootloader(hdev);
 		goto done;
 	}
-	set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
-
-	bt_dev_info(hdev, "Waiting for firmware download to complete");
 
 	/* Before switching the device into operational mode and with that
 	 * booting the loaded firmware, wait for the bootloader notification
@@ -2537,26 +2575,9 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 	 * and thus just timeout if that happens and fail the setup
 	 * of this device.
 	 */
-	err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
-				  TASK_INTERRUPTIBLE,
-				  msecs_to_jiffies(5000));
-	if (err == -EINTR) {
-		bt_dev_err(hdev, "Firmware loading interrupted");
-		goto done;
-	}
-
-	if (err) {
-		bt_dev_err(hdev, "Firmware loading timeout");
-		err = -ETIMEDOUT;
+	err = btusb_download_wait(hdev, calltime, 5000);
+	if (err == -ETIMEDOUT)
 		btintel_reset_to_bootloader(hdev);
-		goto done;
-	}
-
-	if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
-		bt_dev_err(hdev, "Firmware loading failed");
-		err = -ENOEXEC;
-		goto done;
-	}
 
 done:
 	release_firmware(fw);
@@ -2572,6 +2593,7 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
 	char fwname[64];
 	int err;
 	struct btusb_data *data = hci_get_drvdata(hdev);
+	ktime_t calltime;
 
 	if (!ver || !params)
 		return -EINVAL;
@@ -2676,6 +2698,8 @@ download:
 		goto done;
 	}
 
+	calltime = ktime_get();
+
 	set_bit(BTUSB_DOWNLOADING, &data->flags);
 
 	/* Start firmware downloading and get boot parameter */
@@ -2694,9 +2718,6 @@ download:
 		btintel_reset_to_bootloader(hdev);
 		goto done;
 	}
-	set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
-
-	bt_dev_info(hdev, "Waiting for firmware download to complete");
 
 	/* Before switching the device into operational mode and with that
 	 * booting the loaded firmware, wait for the bootloader notification
@@ -2709,26 +2730,9 @@ download:
 	 * and thus just timeout if that happens and fail the setup
 	 * of this device.
 	 */
-	err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
-				  TASK_INTERRUPTIBLE,
-				  msecs_to_jiffies(5000));
-	if (err == -EINTR) {
-		bt_dev_err(hdev, "Firmware loading interrupted");
-		goto done;
-	}
-
-	if (err) {
-		bt_dev_err(hdev, "Firmware loading timeout");
-		err = -ETIMEDOUT;
+	err = btusb_download_wait(hdev, calltime, 5000);
+	if (err == -ETIMEDOUT)
 		btintel_reset_to_bootloader(hdev);
-		goto done;
-	}
-
-	if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
-		bt_dev_err(hdev, "Firmware loading failed");
-		err = -ENOEXEC;
-		goto done;
-	}
 
 done:
 	release_firmware(fw);
@@ -2755,8 +2759,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	 */
 	boot_param = 0x00000000;
 
-	calltime = ktime_get();
-
 	/* Read the Intel version information to determine if the device
 	 * is in bootloader mode or if it already has operational firmware
 	 * loaded.
@@ -2780,12 +2782,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	if (ver.fw_variant == 0x23)
 		goto finish;
 
-	rettime = ktime_get();
-	delta = ktime_sub(rettime, calltime);
-	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
-
-	bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
-
 	calltime = ktime_get();
 
 	set_bit(BTUSB_BOOTING, &data->flags);
@@ -2903,8 +2899,6 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
 	 */
 	boot_param = 0x00000000;
 
-	calltime = ktime_get();
-
 	/* Read the Intel version information to determine if the device
 	 * is in bootloader mode or if it already has operational firmware
 	 * loaded.
@@ -2928,12 +2922,6 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
 	if (version.img_type == 0x03)
 		goto finish;
 
-	rettime = ktime_get();
-	delta = ktime_sub(rettime, calltime);
-	duration = (unsigned long long)ktime_to_ns(delta) >> 10;
-
-	bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
-
 	calltime = ktime_get();
 
 	set_bit(BTUSB_BOOTING, &data->flags);
-- 
cgit v1.2.3


From 604b3cf87fd217ac7d7aeaa94b0bebdf139a8c88 Mon Sep 17 00:00:00 2001
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Tue, 23 Mar 2021 11:59:01 -0700
Subject: Bluetooth: btusb: Consolidate code for waiting firmware to boot

This moves duplicated code for waiting firmware download completion to
a function that can be reused.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btusb.c | 148 +++++++++++++++++++++-------------------------
 1 file changed, 66 insertions(+), 82 deletions(-)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index dcdc434cf794..eb250f533265 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2739,6 +2739,68 @@ done:
 	return err;
 }
 
+static int btusb_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	ktime_t delta, rettime;
+	unsigned long long duration;
+	int err;
+
+	bt_dev_info(hdev, "Waiting for device to boot");
+
+	err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(msec));
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Device boot interrupted");
+		return -EINTR;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Device boot timeout");
+		return -ETIMEDOUT;
+	}
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Device booted in %llu usecs", duration);
+
+	return 0;
+}
+
+static int btusb_intel_boot(struct hci_dev *hdev, u32 boot_addr)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	ktime_t calltime;
+	int err;
+
+	calltime = ktime_get();
+
+	set_bit(BTUSB_BOOTING, &data->flags);
+
+	err = btintel_send_intel_reset(hdev, boot_addr);
+	if (err) {
+		bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
+		btintel_reset_to_bootloader(hdev);
+		return err;
+	}
+
+	/* The bootloader will not indicate when the device is ready. This
+	 * is done by the operational firmware sending bootup notification.
+	 *
+	 * Booting into operational firmware should not take longer than
+	 * 1 second. However if that happens, then just fail the setup
+	 * since something went wrong.
+	 */
+	err = btusb_boot_wait(hdev, calltime, 1000);
+	if (err == -ETIMEDOUT)
+		btintel_reset_to_bootloader(hdev);
+
+	return err;
+}
+
 static int btusb_setup_intel_new(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -2746,8 +2808,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	struct intel_boot_params params;
 	u32 boot_param;
 	char ddcname[64];
-	ktime_t calltime, delta, rettime;
-	unsigned long long duration;
 	int err;
 	struct intel_debug_features features;
 
@@ -2782,46 +2842,9 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	if (ver.fw_variant == 0x23)
 		goto finish;
 
-	calltime = ktime_get();
-
-	set_bit(BTUSB_BOOTING, &data->flags);
-
-	err = btintel_send_intel_reset(hdev, boot_param);
-	if (err) {
-		bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
-		btintel_reset_to_bootloader(hdev);
+	err = btusb_intel_boot(hdev, boot_param);
+	if (err)
 		return err;
-	}
-
-	/* The bootloader will not indicate when the device is ready. This
-	 * is done by the operational firmware sending bootup notification.
-	 *
-	 * Booting into operational firmware should not take longer than
-	 * 1 second. However if that happens, then just fail the setup
-	 * since something went wrong.
-	 */
-	bt_dev_info(hdev, "Waiting for device to boot");
-
-	err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
-				  TASK_INTERRUPTIBLE,
-				  msecs_to_jiffies(1000));
-
-	if (err == -EINTR) {
-		bt_dev_err(hdev, "Device boot interrupted");
-		return -EINTR;
-	}
-
-	if (err) {
-		bt_dev_err(hdev, "Device boot timeout");
-		btintel_reset_to_bootloader(hdev);
-		return -ETIMEDOUT;
-	}
-
-	rettime = ktime_get();
-	delta = ktime_sub(rettime, calltime);
-	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
-
-	bt_dev_info(hdev, "Device booted in %llu usecs", duration);
 
 	clear_bit(BTUSB_BOOTLOADER, &data->flags);
 
@@ -2885,8 +2908,6 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	u32 boot_param;
 	char ddcname[64];
-	ktime_t calltime, delta, rettime;
-	unsigned long long duration;
 	int err;
 	struct intel_debug_features features;
 	struct intel_version_tlv version;
@@ -2922,46 +2943,9 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
 	if (version.img_type == 0x03)
 		goto finish;
 
-	calltime = ktime_get();
-
-	set_bit(BTUSB_BOOTING, &data->flags);
-
-	err = btintel_send_intel_reset(hdev, boot_param);
-	if (err) {
-		bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
-		btintel_reset_to_bootloader(hdev);
+	err = btusb_intel_boot(hdev, boot_param);
+	if (err)
 		return err;
-	}
-
-	/* The bootloader will not indicate when the device is ready. This
-	 * is done by the operational firmware sending bootup notification.
-	 *
-	 * Booting into operational firmware should not take longer than
-	 * 1 second. However if that happens, then just fail the setup
-	 * since something went wrong.
-	 */
-	bt_dev_info(hdev, "Waiting for device to boot");
-
-	err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
-				  TASK_INTERRUPTIBLE,
-				  msecs_to_jiffies(1000));
-
-	if (err == -EINTR) {
-		bt_dev_err(hdev, "Device boot interrupted");
-		return -EINTR;
-	}
-
-	if (err) {
-		bt_dev_err(hdev, "Device boot timeout");
-		btintel_reset_to_bootloader(hdev);
-		return -ETIMEDOUT;
-	}
-
-	rettime = ktime_get();
-	delta = ktime_sub(rettime, calltime);
-	duration = (unsigned long long)ktime_to_ns(delta) >> 10;
-
-	bt_dev_info(hdev, "Device booted in %llu usecs", duration);
 
 	clear_bit(BTUSB_BOOTLOADER, &data->flags);
 
-- 
cgit v1.2.3


From 7de3a42cdc701f4fb09bb4906d69f4014db4af09 Mon Sep 17 00:00:00 2001
From: Lokendra Singh <lokendra.singh@intel.com>
Date: Tue, 23 Mar 2021 11:59:02 -0700
Subject: Bluetooth: btintel: Reorganized bootloader mode tlv checks in
 intel_version_tlv parsing

This moves limited_cce and sbe_type checks under bootloader during tlv parsing
as operational firmware don't have access to these values. Any attempt to read
such values in operational firmware will only fetch garbage data.

Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btintel.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index bddaa4f32566..4ddbf895c382 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -434,26 +434,26 @@ int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
 		return -EINVAL;
 	}
 
-	/* It is required that every single firmware fragment is acknowledged
-	 * with a command complete event. If the boot parameters indicate
-	 * that this bootloader does not send them, then abort the setup.
-	 */
-	if (version->limited_cce != 0x00) {
-		bt_dev_err(hdev, "Unsupported Intel firmware loading method (0x%x)",
-			   version->limited_cce);
-		return -EINVAL;
-	}
-
-	/* Secure boot engine type should be either 1 (ECDSA) or 0 (RSA) */
-	if (version->sbe_type > 0x01) {
-		bt_dev_err(hdev, "Unsupported Intel secure boot engine type (0x%x)",
-			   version->sbe_type);
-		return -EINVAL;
-	}
-
 	switch (version->img_type) {
 	case 0x01:
 		variant = "Bootloader";
+		/* It is required that every single firmware fragment is acknowledged
+		 * with a command complete event. If the boot parameters indicate
+		 * that this bootloader does not send them, then abort the setup.
+		 */
+		if (version->limited_cce != 0x00) {
+			bt_dev_err(hdev, "Unsupported Intel firmware loading method (0x%x)",
+				   version->limited_cce);
+			return -EINVAL;
+		}
+
+		/* Secure boot engine type should be either 1 (ECDSA) or 0 (RSA) */
+		if (version->sbe_type > 0x01) {
+			bt_dev_err(hdev, "Unsupported Intel secure boot engine type (0x%x)",
+				   version->sbe_type);
+			return -EINVAL;
+		}
+
 		bt_dev_info(hdev, "Device revision is %u", version->dev_rev_id);
 		bt_dev_info(hdev, "Secure boot is %s",
 			    version->secure_boot ? "enabled" : "disabled");
-- 
cgit v1.2.3


From 88981354730ce118a76aa030d19fd1308cd2007b Mon Sep 17 00:00:00 2001
From: Lokendra Singh <lokendra.singh@intel.com>
Date: Tue, 23 Mar 2021 11:59:03 -0700
Subject: Bluetooth: btintel: Collect tlv based active firmware build info in
 FW mode

In Operational firmware mode, 'Minimum FW version' TLV ID is not available.
So, we cannot fetch already running firmware info for comparison against
another build. However, It can be collected using a combination of other
TLV ID's information.

Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btintel.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 4ddbf895c382..6442acba76d1 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -537,12 +537,23 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
 			version->img_type = tlv->val[0];
 			break;
 		case INTEL_TLV_TIME_STAMP:
+			/* If image type is Operational firmware (0x03), then
+			 * running FW Calendar Week and Year information can
+			 * be extracted from Timestamp information
+			 */
+			version->min_fw_build_cw = tlv->val[0];
+			version->min_fw_build_yy = tlv->val[1];
 			version->timestamp = get_unaligned_le16(tlv->val);
 			break;
 		case INTEL_TLV_BUILD_TYPE:
 			version->build_type = tlv->val[0];
 			break;
 		case INTEL_TLV_BUILD_NUM:
+			/* If image type is Operational firmware (0x03), then
+			 * running FW build number can be extracted from the
+			 * Build information
+			 */
+			version->min_fw_build_nn = tlv->val[0];
 			version->build_num = get_unaligned_le32(tlv->val);
 			break;
 		case INTEL_TLV_SECURE_BOOT:
-- 
cgit v1.2.3


From 1f4ec585e6618ad75d5a82e58482ea2c5b4b7167 Mon Sep 17 00:00:00 2001
From: Lokendra Singh <lokendra.singh@intel.com>
Date: Tue, 23 Mar 2021 11:59:04 -0700
Subject: Bluetooth: btintel: Skip reading firmware file version while in
 bootloader mode

This skips parsing the firmware version information from the firmware
file while controller is in bootloader mode. As in bootloader mode,
we are supposed to patch unconditionally.

Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btintel.c | 26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 6442acba76d1..e44b6993cf91 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -1031,6 +1031,10 @@ int btintel_download_firmware(struct hci_dev *hdev,
 		/* Skip version checking */
 		break;
 	default:
+		/* Skip reading firmware file version in bootloader mode */
+		if (ver->fw_variant == 0x06)
+			break;
+
 		/* Skip download if firmware has the same version */
 		if (btintel_firmware_version(hdev, ver->fw_build_num,
 					     ver->fw_build_ww, ver->fw_build_yy,
@@ -1070,15 +1074,19 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 	int err;
 	u32 css_header_ver;
 
-	/* Skip download if firmware has the same version */
-	if (btintel_firmware_version(hdev, ver->min_fw_build_nn,
-				     ver->min_fw_build_cw, ver->min_fw_build_yy,
-				     fw, boot_param)) {
-		bt_dev_info(hdev, "Firmware already loaded");
-		/* Return -EALREADY to indicate that firmware has already been
-		 * loaded.
-		 */
-		return -EALREADY;
+	/* Skip reading firmware file version in bootloader mode */
+	if (ver->img_type != 0x01) {
+		/* Skip download if firmware has the same version */
+		if (btintel_firmware_version(hdev, ver->min_fw_build_nn,
+					     ver->min_fw_build_cw,
+					     ver->min_fw_build_yy,
+					     fw, boot_param)) {
+			bt_dev_info(hdev, "Firmware already loaded");
+			/* Return -EALREADY to indicate that firmware has
+			 * already been loaded.
+			 */
+			return -EALREADY;
+		}
 	}
 
 	/* The firmware variant determines if the device is in bootloader
-- 
cgit v1.2.3


From 27e554a4fcd84e499bf0a82122b8c4c3f1de38b6 Mon Sep 17 00:00:00 2001
From: "mark-yw.chen" <mark-yw.chen@mediatek.com>
Date: Mon, 29 Mar 2021 01:18:33 +0800
Subject: Bluetooth: btusb: Enable quirk boolean flag for Mediatek Chip.

Adding support LE scatternet and WBS for Mediatek Chip

Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btusb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index eb250f533265..192cb8c191bc 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -399,7 +399,9 @@ static const struct usb_device_id blacklist_table[] = {
 
 	/* MediaTek Bluetooth devices */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0e8d, 0xe0, 0x01, 0x01),
-	  .driver_info = BTUSB_MEDIATEK },
+	  .driver_info = BTUSB_MEDIATEK |
+			 BTUSB_WIDEBAND_SPEECH |
+			 BTUSB_VALID_LE_STATES },
 
 	/* Additional MediaTek MT7615E Bluetooth devices */
 	{ USB_DEVICE(0x13d3, 0x3560), .driver_info = BTUSB_MEDIATEK},
-- 
cgit v1.2.3


From afd2daa26c7abd734d78bd274fc6c59a15e61063 Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Tue, 6 Apr 2021 21:55:53 +0200
Subject: Bluetooth: Add support for virtio transport driver

This adds support for Bluetooth HCI transport over virtio.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/Kconfig       |  10 +
 drivers/bluetooth/Makefile      |   2 +
 drivers/bluetooth/virtio_bt.c   | 401 ++++++++++++++++++++++++++++++++++++++++
 include/uapi/linux/virtio_bt.h  |  31 ++++
 include/uapi/linux/virtio_ids.h |   1 +
 5 files changed, 445 insertions(+)
 create mode 100644 drivers/bluetooth/virtio_bt.c
 create mode 100644 include/uapi/linux/virtio_bt.h

(limited to 'drivers/bluetooth')

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 4e73a531b377..851842372c9b 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -425,4 +425,14 @@ config BT_HCIRSI
 	  Say Y here to compile support for HCI over Redpine into the
 	  kernel or say M to compile as a module.
 
+config BT_VIRTIO
+	tristate "Virtio Bluetooth driver"
+	depends on VIRTIO
+	help
+	  Virtio Bluetooth support driver.
+	  This driver supports Virtio Bluetooth devices.
+
+	  Say Y here to compile support for HCI over Virtio into the
+	  kernel or say M to compile as a module.
+
 endmenu
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 1a58a3ae142c..16286ea2655d 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -26,6 +26,8 @@ obj-$(CONFIG_BT_BCM)		+= btbcm.o
 obj-$(CONFIG_BT_RTL)		+= btrtl.o
 obj-$(CONFIG_BT_QCA)		+= btqca.o
 
+obj-$(CONFIG_BT_VIRTIO)		+= virtio_bt.o
+
 obj-$(CONFIG_BT_HCIUART_NOKIA)	+= hci_nokia.o
 
 obj-$(CONFIG_BT_HCIRSI)		+= btrsi.o
diff --git a/drivers/bluetooth/virtio_bt.c b/drivers/bluetooth/virtio_bt.c
new file mode 100644
index 000000000000..c804db7e90f8
--- /dev/null
+++ b/drivers/bluetooth/virtio_bt.c
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/module.h>
+#include <linux/virtio.h>
+#include <linux/virtio_config.h>
+#include <linux/skbuff.h>
+
+#include <uapi/linux/virtio_ids.h>
+#include <uapi/linux/virtio_bt.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#define VERSION "0.1"
+
+enum {
+	VIRTBT_VQ_TX,
+	VIRTBT_VQ_RX,
+	VIRTBT_NUM_VQS,
+};
+
+struct virtio_bluetooth {
+	struct virtio_device *vdev;
+	struct virtqueue *vqs[VIRTBT_NUM_VQS];
+	struct work_struct rx;
+	struct hci_dev *hdev;
+};
+
+static int virtbt_add_inbuf(struct virtio_bluetooth *vbt)
+{
+	struct virtqueue *vq = vbt->vqs[VIRTBT_VQ_RX];
+	struct scatterlist sg[1];
+	struct sk_buff *skb;
+	int err;
+
+	skb = alloc_skb(1000, GFP_KERNEL);
+	sg_init_one(sg, skb->data, 1000);
+
+	err = virtqueue_add_inbuf(vq, sg, 1, skb, GFP_KERNEL);
+	if (err < 0) {
+		kfree_skb(skb);
+		return err;
+	}
+
+	return 0;
+}
+
+static int virtbt_open(struct hci_dev *hdev)
+{
+	struct virtio_bluetooth *vbt = hci_get_drvdata(hdev);
+
+	if (virtbt_add_inbuf(vbt) < 0)
+		return -EIO;
+
+	virtqueue_kick(vbt->vqs[VIRTBT_VQ_RX]);
+	return 0;
+}
+
+static int virtbt_close(struct hci_dev *hdev)
+{
+	struct virtio_bluetooth *vbt = hci_get_drvdata(hdev);
+	int i;
+
+	cancel_work_sync(&vbt->rx);
+
+	for (i = 0; i < ARRAY_SIZE(vbt->vqs); i++) {
+		struct virtqueue *vq = vbt->vqs[i];
+		struct sk_buff *skb;
+
+		while ((skb = virtqueue_detach_unused_buf(vq)))
+			kfree_skb(skb);
+	}
+
+	return 0;
+}
+
+static int virtbt_flush(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int virtbt_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct virtio_bluetooth *vbt = hci_get_drvdata(hdev);
+	struct scatterlist sg[1];
+	int err;
+
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+	sg_init_one(sg, skb->data, skb->len);
+	err = virtqueue_add_outbuf(vbt->vqs[VIRTBT_VQ_TX], sg, 1, skb,
+				   GFP_KERNEL);
+	if (err) {
+		kfree_skb(skb);
+		return err;
+	}
+
+	virtqueue_kick(vbt->vqs[VIRTBT_VQ_TX]);
+	return 0;
+}
+
+static int virtbt_setup_zephyr(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Read Build Information */
+	skb = __hci_cmd_sync(hdev, 0xfc08, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
+
+	hci_set_fw_info(hdev, "%s", skb->data + 1);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int virtbt_set_bdaddr_zephyr(struct hci_dev *hdev,
+				    const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+
+	/* Write BD_ADDR */
+	skb = __hci_cmd_sync(hdev, 0xfc06, 6, bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int virtbt_setup_intel(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Intel Read Version */
+	skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int virtbt_set_bdaddr_intel(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+
+	/* Intel Write BD Address */
+	skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int virtbt_setup_realtek(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Read ROM Version */
+	skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	bt_dev_info(hdev, "ROM version %u", *((__u8 *) (skb->data + 1)));
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int virtbt_shutdown_generic(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Reset */
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static void virtbt_rx_handle(struct virtio_bluetooth *vbt, struct sk_buff *skb)
+{
+	__u8 pkt_type;
+
+	pkt_type = *((__u8 *) skb->data);
+	skb_pull(skb, 1);
+
+	switch (pkt_type) {
+	case HCI_EVENT_PKT:
+	case HCI_ACLDATA_PKT:
+	case HCI_SCODATA_PKT:
+	case HCI_ISODATA_PKT:
+		hci_skb_pkt_type(skb) = pkt_type;
+		hci_recv_frame(vbt->hdev, skb);
+		break;
+	}
+}
+
+static void virtbt_rx_work(struct work_struct *work)
+{
+	struct virtio_bluetooth *vbt = container_of(work,
+						    struct virtio_bluetooth, rx);
+	struct sk_buff *skb;
+	unsigned int len;
+
+	skb = virtqueue_get_buf(vbt->vqs[VIRTBT_VQ_RX], &len);
+	if (!skb)
+		return;
+
+	skb->len = len;
+	virtbt_rx_handle(vbt, skb);
+
+	if (virtbt_add_inbuf(vbt) < 0)
+		return;
+
+	virtqueue_kick(vbt->vqs[VIRTBT_VQ_RX]);
+}
+
+static void virtbt_tx_done(struct virtqueue *vq)
+{
+	struct sk_buff *skb;
+	unsigned int len;
+
+	while ((skb = virtqueue_get_buf(vq, &len)))
+		kfree_skb(skb);
+}
+
+static void virtbt_rx_done(struct virtqueue *vq)
+{
+	struct virtio_bluetooth *vbt = vq->vdev->priv;
+
+	schedule_work(&vbt->rx);
+}
+
+static int virtbt_probe(struct virtio_device *vdev)
+{
+	vq_callback_t *callbacks[VIRTBT_NUM_VQS] = {
+		[VIRTBT_VQ_TX] = virtbt_tx_done,
+		[VIRTBT_VQ_RX] = virtbt_rx_done,
+	};
+	const char *names[VIRTBT_NUM_VQS] = {
+		[VIRTBT_VQ_TX] = "tx",
+		[VIRTBT_VQ_RX] = "rx",
+	};
+	struct virtio_bluetooth *vbt;
+	struct hci_dev *hdev;
+	int err;
+	__u8 type;
+
+	if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1))
+		return -ENODEV;
+
+	type = virtio_cread8(vdev, offsetof(struct virtio_bt_config, type));
+
+	switch (type) {
+	case VIRTIO_BT_CONFIG_TYPE_PRIMARY:
+	case VIRTIO_BT_CONFIG_TYPE_AMP:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	vbt = kzalloc(sizeof(*vbt), GFP_KERNEL);
+	if (!vbt)
+		return -ENOMEM;
+
+	vdev->priv = vbt;
+	vbt->vdev = vdev;
+
+	INIT_WORK(&vbt->rx, virtbt_rx_work);
+
+	err = virtio_find_vqs(vdev, VIRTBT_NUM_VQS, vbt->vqs, callbacks,
+			      names, NULL);
+	if (err)
+		return err;
+
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		err = -ENOMEM;
+		goto failed;
+	}
+
+	vbt->hdev = hdev;
+
+	hdev->bus = HCI_VIRTIO;
+	hdev->dev_type = type;
+	hci_set_drvdata(hdev, vbt);
+
+	hdev->open  = virtbt_open;
+	hdev->close = virtbt_close;
+	hdev->flush = virtbt_flush;
+	hdev->send  = virtbt_send_frame;
+
+	if (virtio_has_feature(vdev, VIRTIO_BT_F_VND_HCI)) {
+		__u16 vendor;
+
+		virtio_cread(vdev, struct virtio_bt_config, vendor, &vendor);
+
+		switch (vendor) {
+		case VIRTIO_BT_CONFIG_VENDOR_ZEPHYR:
+			hdev->manufacturer = 1521;
+			hdev->setup = virtbt_setup_zephyr;
+			hdev->shutdown = virtbt_shutdown_generic;
+			hdev->set_bdaddr = virtbt_set_bdaddr_zephyr;
+			break;
+
+		case VIRTIO_BT_CONFIG_VENDOR_INTEL:
+			hdev->manufacturer = 2;
+			hdev->setup = virtbt_setup_intel;
+			hdev->shutdown = virtbt_shutdown_generic;
+			hdev->set_bdaddr = virtbt_set_bdaddr_intel;
+			set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+			set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+			set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+			break;
+
+		case VIRTIO_BT_CONFIG_VENDOR_REALTEK:
+			hdev->manufacturer = 93;
+			hdev->setup = virtbt_setup_realtek;
+			hdev->shutdown = virtbt_shutdown_generic;
+			set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+			set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+			break;
+		}
+	}
+
+	if (virtio_has_feature(vdev, VIRTIO_BT_F_MSFT_EXT)) {
+		__u16 msft_opcode;
+
+		virtio_cread(vdev, struct virtio_bt_config,
+			     msft_opcode, &msft_opcode);
+
+		hci_set_msft_opcode(hdev, msft_opcode);
+	}
+
+	if (virtio_has_feature(vdev, VIRTIO_BT_F_AOSP_EXT))
+		hci_set_aosp_capable(hdev);
+
+	if (hci_register_dev(hdev) < 0) {
+		hci_free_dev(hdev);
+		err = -EBUSY;
+		goto failed;
+	}
+
+	return 0;
+
+failed:
+	vdev->config->del_vqs(vdev);
+	return err;
+}
+
+static void virtbt_remove(struct virtio_device *vdev)
+{
+	struct virtio_bluetooth *vbt = vdev->priv;
+	struct hci_dev *hdev = vbt->hdev;
+
+	hci_unregister_dev(hdev);
+	vdev->config->reset(vdev);
+
+	hci_free_dev(hdev);
+	vbt->hdev = NULL;
+
+	vdev->config->del_vqs(vdev);
+	kfree(vbt);
+}
+
+static struct virtio_device_id virtbt_table[] = {
+	{ VIRTIO_ID_BT, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
+MODULE_DEVICE_TABLE(virtio, virtbt_table);
+
+static const unsigned int virtbt_features[] = {
+	VIRTIO_BT_F_VND_HCI,
+	VIRTIO_BT_F_MSFT_EXT,
+	VIRTIO_BT_F_AOSP_EXT,
+};
+
+static struct virtio_driver virtbt_driver = {
+	.driver.name         = KBUILD_MODNAME,
+	.driver.owner        = THIS_MODULE,
+	.feature_table       = virtbt_features,
+	.feature_table_size  = ARRAY_SIZE(virtbt_features),
+	.id_table            = virtbt_table,
+	.probe               = virtbt_probe,
+	.remove              = virtbt_remove,
+};
+
+module_virtio_driver(virtbt_driver);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Generic Bluetooth VIRTIO driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/include/uapi/linux/virtio_bt.h b/include/uapi/linux/virtio_bt.h
new file mode 100644
index 000000000000..a7bd48daa9a9
--- /dev/null
+++ b/include/uapi/linux/virtio_bt.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+
+#ifndef _UAPI_LINUX_VIRTIO_BT_H
+#define _UAPI_LINUX_VIRTIO_BT_H
+
+#include <linux/virtio_types.h>
+
+/* Feature bits */
+#define VIRTIO_BT_F_VND_HCI	0	/* Indicates vendor command support */
+#define VIRTIO_BT_F_MSFT_EXT	1	/* Indicates MSFT vendor support */
+#define VIRTIO_BT_F_AOSP_EXT	2	/* Indicates AOSP vendor support */
+
+enum virtio_bt_config_type {
+	VIRTIO_BT_CONFIG_TYPE_PRIMARY	= 0,
+	VIRTIO_BT_CONFIG_TYPE_AMP	= 1,
+};
+
+enum virtio_bt_config_vendor {
+	VIRTIO_BT_CONFIG_VENDOR_NONE	= 0,
+	VIRTIO_BT_CONFIG_VENDOR_ZEPHYR	= 1,
+	VIRTIO_BT_CONFIG_VENDOR_INTEL	= 2,
+	VIRTIO_BT_CONFIG_VENDOR_REALTEK	= 3,
+};
+
+struct virtio_bt_config {
+	__u8  type;
+	__u16 vendor;
+	__u16 msft_opcode;
+} __attribute__((packed));
+
+#endif /* _UAPI_LINUX_VIRTIO_BT_H */
diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
index bc1c0621f5ed..b4f468e9441d 100644
--- a/include/uapi/linux/virtio_ids.h
+++ b/include/uapi/linux/virtio_ids.h
@@ -53,6 +53,7 @@
 #define VIRTIO_ID_MEM			24 /* virtio mem */
 #define VIRTIO_ID_FS			26 /* virtio filesystem */
 #define VIRTIO_ID_PMEM			27 /* virtio pmem */
+#define VIRTIO_ID_BT			28 /* virtio bluetooth */
 #define VIRTIO_ID_MAC80211_HWSIM	29 /* virtio mac80211-hwsim */
 
 #endif /* _LINUX_VIRTIO_IDS_H */
-- 
cgit v1.2.3