From 0899431f95a7a695f342527548b24ffd902c68ab Mon Sep 17 00:00:00 2001 From: Dario Binacchi Date: Sun, 6 Jun 2021 22:22:53 +0200 Subject: clk: ti: add am33xx/am43xx spread spectrum clock support The patch enables spread spectrum clocking (SSC) for MPU and LCD PLLs. As reported by the TI spruh73x/spruhl7x RM, SSC is only supported for the DISP/LCD and MPU PLLs on am33xx/am43xx. SSC is not supported for DDR, PER, and CORE PLLs. Calculating the required values and setting the registers accordingly was taken from the set_mpu_spreadspectrum routine contained in the arch/arm/mach-omap2/am33xx/clock_am33xx.c file of the u-boot project. In locked condition, DPLL output clock = CLKINP *[M/N]. In case of SSC enabled, the reference manual explains that there is a restriction of range of M values. Since the omap2_dpll_round_rate routine attempts to select the minimum possible N, the value of M obtained is not guaranteed to be within the range required. With the new "ti,min-div" parameter it is possible to increase N and consequently M to satisfy the constraint imposed by SSC. Signed-off-by: Dario Binacchi Reviewed-by: Tero Kristo Link: https://lore.kernel.org/r/20210606202253.31649-6-dariobin@libero.it Signed-off-by: Stephen Boyd --- drivers/clk/ti/dpll.c | 39 ++++++++++++++++++++++ drivers/clk/ti/dpll3xxx.c | 85 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 124 insertions(+) (limited to 'drivers/clk/ti') diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index d6f1ac5b53e1..e9f9aee936ae 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -290,7 +290,9 @@ static void __init of_ti_dpll_setup(struct device_node *node, struct clk_init_data *init = NULL; const char **parent_names = NULL; struct dpll_data *dd = NULL; + int ssc_clk_index; u8 dpll_mode = 0; + u32 min_div; dd = kmemdup(ddt, sizeof(*dd), GFP_KERNEL); clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); @@ -345,6 +347,27 @@ static void __init of_ti_dpll_setup(struct device_node *node, if (dd->autoidle_mask) { if (ti_clk_get_reg_addr(node, 3, &dd->autoidle_reg)) goto cleanup; + + ssc_clk_index = 4; + } else { + ssc_clk_index = 3; + } + + if (dd->ssc_deltam_int_mask && dd->ssc_deltam_frac_mask && + dd->ssc_modfreq_mant_mask && dd->ssc_modfreq_exp_mask) { + if (ti_clk_get_reg_addr(node, ssc_clk_index++, + &dd->ssc_deltam_reg)) + goto cleanup; + + if (ti_clk_get_reg_addr(node, ssc_clk_index++, + &dd->ssc_modfreq_reg)) + goto cleanup; + + of_property_read_u32(node, "ti,ssc-modfreq-hz", + &dd->ssc_modfreq); + of_property_read_u32(node, "ti,ssc-deltam", &dd->ssc_deltam); + dd->ssc_downspread = + of_property_read_bool(node, "ti,ssc-downspread"); } if (of_property_read_bool(node, "ti,low-power-stop")) @@ -356,6 +379,10 @@ static void __init of_ti_dpll_setup(struct device_node *node, if (of_property_read_bool(node, "ti,lock")) dpll_mode |= 1 << DPLL_LOCKED; + if (!of_property_read_u32(node, "ti,min-div", &min_div) && + min_div > dd->min_divider) + dd->min_divider = min_div; + if (dpll_mode) dd->modes = dpll_mode; @@ -585,8 +612,14 @@ static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, + .ssc_enable_mask = 0x1 << 12, + .ssc_downspread_mask = 0x1 << 14, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, + .ssc_deltam_int_mask = 0x3 << 18, + .ssc_deltam_frac_mask = 0x3ffff, + .ssc_modfreq_mant_mask = 0x7f, + .ssc_modfreq_exp_mask = 0x7 << 8, .max_multiplier = 2047, .max_divider = 128, .min_divider = 1, @@ -645,8 +678,14 @@ static void __init of_ti_am3_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, + .ssc_enable_mask = 0x1 << 12, + .ssc_downspread_mask = 0x1 << 14, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, + .ssc_deltam_int_mask = 0x3 << 18, + .ssc_deltam_frac_mask = 0x3ffff, + .ssc_modfreq_mant_mask = 0x7f, + .ssc_modfreq_exp_mask = 0x7 << 8, .max_multiplier = 2047, .max_divider = 128, .min_divider = 1, diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c index 94d5b5fe9a2b..e32b3515f9e7 100644 --- a/drivers/clk/ti/dpll3xxx.c +++ b/drivers/clk/ti/dpll3xxx.c @@ -291,6 +291,88 @@ static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n) *sd_div = sd; } +/** + * omap3_noncore_dpll_ssc_program - set spread-spectrum clocking registers + * @clk: struct clk * of DPLL to set + * + * Enable the DPLL spread spectrum clocking if frequency modulation and + * frequency spreading have been set, otherwise disable it. + */ +static void omap3_noncore_dpll_ssc_program(struct clk_hw_omap *clk) +{ + struct dpll_data *dd = clk->dpll_data; + unsigned long ref_rate; + u32 v, ctrl, mod_freq_divider, exponent, mantissa; + u32 deltam_step, deltam_ceil; + + ctrl = ti_clk_ll_ops->clk_readl(&dd->control_reg); + + if (dd->ssc_modfreq && dd->ssc_deltam) { + ctrl |= dd->ssc_enable_mask; + + if (dd->ssc_downspread) + ctrl |= dd->ssc_downspread_mask; + else + ctrl &= ~dd->ssc_downspread_mask; + + ref_rate = clk_hw_get_rate(dd->clk_ref); + mod_freq_divider = + (ref_rate / dd->last_rounded_n) / (4 * dd->ssc_modfreq); + if (dd->ssc_modfreq > (ref_rate / 70)) + pr_warn("clock: SSC modulation frequency of DPLL %s greater than %ld\n", + __clk_get_name(clk->hw.clk), ref_rate / 70); + + exponent = 0; + mantissa = mod_freq_divider; + while ((mantissa > 127) && (exponent < 7)) { + exponent++; + mantissa /= 2; + } + if (mantissa > 127) + mantissa = 127; + + v = ti_clk_ll_ops->clk_readl(&dd->ssc_modfreq_reg); + v &= ~(dd->ssc_modfreq_mant_mask | dd->ssc_modfreq_exp_mask); + v |= mantissa << __ffs(dd->ssc_modfreq_mant_mask); + v |= exponent << __ffs(dd->ssc_modfreq_exp_mask); + ti_clk_ll_ops->clk_writel(v, &dd->ssc_modfreq_reg); + + deltam_step = dd->last_rounded_m * dd->ssc_deltam; + deltam_step /= 10; + if (dd->ssc_downspread) + deltam_step /= 2; + + deltam_step <<= __ffs(dd->ssc_deltam_int_mask); + deltam_step /= 100; + deltam_step /= mod_freq_divider; + if (deltam_step > 0xFFFFF) + deltam_step = 0xFFFFF; + + deltam_ceil = (deltam_step & dd->ssc_deltam_int_mask) >> + __ffs(dd->ssc_deltam_int_mask); + if (deltam_step & dd->ssc_deltam_frac_mask) + deltam_ceil++; + + if ((dd->ssc_downspread && + ((dd->last_rounded_m - (2 * deltam_ceil)) < 20 || + dd->last_rounded_m > 2045)) || + ((dd->last_rounded_m - deltam_ceil) < 20 || + (dd->last_rounded_m + deltam_ceil) > 2045)) + pr_warn("clock: SSC multiplier of DPLL %s is out of range\n", + __clk_get_name(clk->hw.clk)); + + v = ti_clk_ll_ops->clk_readl(&dd->ssc_deltam_reg); + v &= ~(dd->ssc_deltam_int_mask | dd->ssc_deltam_frac_mask); + v |= deltam_step << __ffs(dd->ssc_deltam_int_mask | + dd->ssc_deltam_frac_mask); + ti_clk_ll_ops->clk_writel(v, &dd->ssc_deltam_reg); + } else { + ctrl &= ~dd->ssc_enable_mask; + } + + ti_clk_ll_ops->clk_writel(ctrl, &dd->control_reg); +} + /** * omap3_noncore_dpll_program - set non-core DPLL M,N values directly * @clk: struct clk * of DPLL to set @@ -390,6 +472,9 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) ti_clk_ll_ops->clk_writel(v, &dd->control_reg); } + if (dd->ssc_enable_mask) + omap3_noncore_dpll_ssc_program(clk); + /* We let the clock framework set the other output dividers later */ /* REVISIT: Set ramp-up delay? */ -- cgit v1.2.3