From ff652fcf84f7a0977bbad4eab976f7813665fbc8 Mon Sep 17 00:00:00 2001
From: Philipp Zabel
Date: Tue, 18 Sep 2018 11:34:17 +0200
Subject: gpu: ipu-v3: image-convert: relax alignment restrictions
For the planar but U/V-packed formats NV12 and NV16, 8 pixel width
alignment is good enough to fulfill the 8 byte stride requirement.
If we allow the input 8-pixel DMA bursts to overshoot the end of the
line, the only input alignment restrictions are dictated by the pixel
format and 8-byte aligned line start address.
Since different tile sizes are allowed, the output tile with / height
alignment doesn't need to be multiplied by number of columns / rows.
Signed-off-by: Philipp Zabel
[slongerbeam@gmail.com: Bring in the fixes to format width and
height alignment restrictions from imx-media-mem2mem.c.]
Signed-off-by: Steve Longerbeam
Signed-off-by: Philipp Zabel
---
drivers/gpu/ipu-v3/ipu-image-convert.c | 81 +++++++++++++++++-----------------
1 file changed, 41 insertions(+), 40 deletions(-)
(limited to 'drivers/gpu/ipu-v3/ipu-image-convert.c')
diff --git a/drivers/gpu/ipu-v3/ipu-image-convert.c b/drivers/gpu/ipu-v3/ipu-image-convert.c
index 0451d699f515..0829723a7599 100644
--- a/drivers/gpu/ipu-v3/ipu-image-convert.c
+++ b/drivers/gpu/ipu-v3/ipu-image-convert.c
@@ -551,31 +551,46 @@ static inline u32 tile_top_align(const struct ipu_image_pixfmt *fmt)
return fmt->uv_height_dec > 1 ? 2 : 1;
}
-/*
- * We have to adjust the tile width such that the tile physaddrs and
- * U and V plane offsets are multiples of 8 bytes as required by
- * the IPU DMA Controller. For the planar formats, this corresponds
- * to a pixel alignment of 16 (but use a more formal equation since
- * the variables are available). For all the packed formats, 8 is
- * good enough.
- */
-static inline u32 tile_width_align(const struct ipu_image_pixfmt *fmt)
+static inline u32 tile_width_align(enum ipu_image_convert_type type,
+ const struct ipu_image_pixfmt *fmt,
+ enum ipu_rotate_mode rot_mode)
{
- return fmt->planar ? 8 * fmt->uv_width_dec : 8;
+ if (type == IMAGE_CONVERT_IN) {
+ /*
+ * The IC burst reads 8 pixels at a time. Reading beyond the
+ * end of the line is usually acceptable. Those pixels are
+ * ignored, unless the IC has to write the scaled line in
+ * reverse.
+ */
+ return (!ipu_rot_mode_is_irt(rot_mode) &&
+ (rot_mode & IPU_ROT_BIT_HFLIP)) ? 8 : 2;
+ }
+
+ /*
+ * Align to 16x16 pixel blocks for planar 4:2:0 chroma subsampled
+ * formats to guarantee 8-byte aligned line start addresses in the
+ * chroma planes when IRT is used. Align to 8x8 pixel IRT block size
+ * for all other formats.
+ */
+ return (ipu_rot_mode_is_irt(rot_mode) &&
+ fmt->planar && !fmt->uv_packed) ?
+ 8 * fmt->uv_width_dec : 8;
}
-/*
- * For tile height alignment, we have to ensure that the output tile
- * heights are multiples of 8 lines if the IRT is required by the
- * given rotation mode (the IRT performs rotations on 8x8 blocks
- * at a time). If the IRT is not used, or for input image tiles,
- * 2 lines are good enough.
- */
static inline u32 tile_height_align(enum ipu_image_convert_type type,
+ const struct ipu_image_pixfmt *fmt,
enum ipu_rotate_mode rot_mode)
{
- return (type == IMAGE_CONVERT_OUT &&
- ipu_rot_mode_is_irt(rot_mode)) ? 8 : 2;
+ if (type == IMAGE_CONVERT_IN || !ipu_rot_mode_is_irt(rot_mode))
+ return 2;
+
+ /*
+ * Align to 16x16 pixel blocks for planar 4:2:0 chroma subsampled
+ * formats to guarantee 8-byte aligned line start addresses in the
+ * chroma planes when IRT is used. Align to 8x8 pixel IRT block size
+ * for all other formats.
+ */
+ return (fmt->planar && !fmt->uv_packed) ? 8 * fmt->uv_width_dec : 8;
}
/*
@@ -661,8 +676,9 @@ static void find_seams(struct ipu_image_convert_ctx *ctx,
unsigned int in_top_align = tile_top_align(in->fmt);
unsigned int out_left_align = tile_left_align(out->fmt);
unsigned int out_top_align = tile_top_align(out->fmt);
- unsigned int out_width_align = tile_width_align(out->fmt);
- unsigned int out_height_align = tile_height_align(out->type,
+ unsigned int out_width_align = tile_width_align(out->type, out->fmt,
+ ctx->rot_mode);
+ unsigned int out_height_align = tile_height_align(out->type, out->fmt,
ctx->rot_mode);
unsigned int in_right = in->base.rect.width;
unsigned int in_bottom = in->base.rect.height;
@@ -1855,8 +1871,6 @@ void ipu_image_convert_adjust(struct ipu_image *in, struct ipu_image *out,
enum ipu_rotate_mode rot_mode)
{
const struct ipu_image_pixfmt *infmt, *outfmt;
- unsigned int num_in_rows, num_in_cols;
- unsigned int num_out_rows, num_out_cols;
u32 w_align, h_align;
infmt = get_format(in->pix.pixelformat);
@@ -1888,28 +1902,15 @@ void ipu_image_convert_adjust(struct ipu_image *in, struct ipu_image *out,
in->pix.height / 4);
}
- /* get tiling rows/cols from output format */
- num_out_rows = num_stripes(out->pix.height);
- num_out_cols = num_stripes(out->pix.width);
- if (ipu_rot_mode_is_irt(rot_mode)) {
- num_in_rows = num_out_cols;
- num_in_cols = num_out_rows;
- } else {
- num_in_rows = num_out_rows;
- num_in_cols = num_out_cols;
- }
-
/* align input width/height */
- w_align = ilog2(tile_width_align(infmt) * num_in_cols);
- h_align = ilog2(tile_height_align(IMAGE_CONVERT_IN, rot_mode) *
- num_in_rows);
+ w_align = ilog2(tile_width_align(IMAGE_CONVERT_IN, infmt, rot_mode));
+ h_align = ilog2(tile_height_align(IMAGE_CONVERT_IN, infmt, rot_mode));
in->pix.width = clamp_align(in->pix.width, MIN_W, MAX_W, w_align);
in->pix.height = clamp_align(in->pix.height, MIN_H, MAX_H, h_align);
/* align output width/height */
- w_align = ilog2(tile_width_align(outfmt) * num_out_cols);
- h_align = ilog2(tile_height_align(IMAGE_CONVERT_OUT, rot_mode) *
- num_out_rows);
+ w_align = ilog2(tile_width_align(IMAGE_CONVERT_OUT, outfmt, rot_mode));
+ h_align = ilog2(tile_height_align(IMAGE_CONVERT_OUT, outfmt, rot_mode));
out->pix.width = clamp_align(out->pix.width, MIN_W, MAX_W, w_align);
out->pix.height = clamp_align(out->pix.height, MIN_H, MAX_H, h_align);
--
cgit v1.2.3