From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/isdn/hisax/Kconfig | 442 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 442 insertions(+) create mode 100644 drivers/isdn/hisax/Kconfig (limited to 'drivers/isdn/hisax/Kconfig') diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig new file mode 100644 index 000000000000..6c7b8bffc6fd --- /dev/null +++ b/drivers/isdn/hisax/Kconfig @@ -0,0 +1,442 @@ + +menu "Passive cards" + depends on ISDN_I4L + +config ISDN_DRV_HISAX + tristate "HiSax SiemensChipSet driver support" + select CRC_CCITT + ---help--- + This is a driver supporting the Siemens chipset on various + ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles + S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many + compatibles). + + HiSax is just the name of this driver, not the name of any hardware. + + If you have a card with such a chipset, you should say Y here and + also to the configuration option of the driver for your particular + card, below. + +if ISDN_DRV_HISAX!=n + +comment "D-channel protocol features" + +config HISAX_EURO + bool "HiSax Support for EURO/DSS1" + help + Say Y or N according to the D-channel protocol which your local + telephone service company provides. + + The call control protocol E-DSS1 is used in most European countries. + If unsure, say Y. + +config DE_AOC + bool "Support for german chargeinfo" + depends on HISAX_EURO + help + If you want that the HiSax hardware driver sends messages to the + upper level of the isdn code on each AOCD (Advice Of Charge, During + the call -- transmission of the fee information during a call) and + on each AOCE (Advice Of Charge, at the End of the call -- + transmission of fee information at the end of the call), say Y here. + This works only in Germany. + +config HISAX_NO_SENDCOMPLETE + bool "Disable sending complete" + depends on HISAX_EURO + help + If you have trouble with some ugly exchanges or you live in + Australia select this option. + +config HISAX_NO_LLC + bool "Disable sending low layer compatibility" + depends on HISAX_EURO + help + If you have trouble with some ugly exchanges try to select this + option. + +config HISAX_NO_KEYPAD + bool "Disable keypad protocol option" + depends on HISAX_EURO + help + If you like to send special dial strings including * or # without + using the keypad protocol, select this option. + +config HISAX_1TR6 + bool "HiSax Support for german 1TR6" + help + Say Y or N according to the D-channel protocol which your local + telephone service company provides. + + 1TR6 is an old call control protocol which was used in Germany + before E-DSS1 was established. Nowadays, all new lines in Germany + use E-DSS1. + +config HISAX_NI1 + bool "HiSax Support for US NI1" + help + Enable this if you like to use ISDN in US on a NI1 basic rate + interface. + +config HISAX_MAX_CARDS + int "Maximum number of cards supported by HiSax" + default "8" + help + This option allows you to specify the maximum number of cards which + the HiSax driver will be able to handle. + +comment "HiSax supported cards" + +config HISAX_16_0 + bool "Teles 16.0/8.0" + depends on ISA + help + This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8 + and many compatibles. + + See on how to configure it + using the different cards, a different D-channel protocol, or + non-standard IRQ/port/shmem settings. + +config HISAX_16_3 + bool "Teles 16.3 or PNP or PCMCIA" + help + This enables HiSax support for the Teles ISDN-cards S0-16.3 the + Teles/Creatix PnP and the Teles PCMCIA. + + See on how to configure it + using the different cards, a different D-channel protocol, or + non-standard IRQ/port settings. + +config HISAX_TELESPCI + bool "Teles PCI" + depends on PCI && (BROKEN || !(SPARC64 || PPC)) + help + This enables HiSax support for the Teles PCI. + See on how to configure it. + +config HISAX_S0BOX + bool "Teles S0Box" + help + This enables HiSax support for the Teles/Creatix parallel port + S0BOX. See on how to + configure it. + +config HISAX_AVM_A1 + bool "AVM A1 (Fritz)" + depends on ISA + help + This enables HiSax support for the AVM A1 (aka "Fritz"). + + See on how to configure it + using the different cards, a different D-channel protocol, or + non-standard IRQ/port settings. + +config HISAX_FRITZPCI + bool "AVM PnP/PCI (Fritz!PnP/PCI)" + help + This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI". + See on how to configure it. + +config HISAX_AVM_A1_PCMCIA + bool "AVM A1 PCMCIA (Fritz)" + help + This enables HiSax support for the AVM A1 "Fritz!PCMCIA"). + See on how to configure it. + +config HISAX_ELSA + bool "Elsa cards" + help + This enables HiSax support for the Elsa Mircolink ISA cards, for the + Elsa Quickstep series cards and Elsa PCMCIA. + + See on how to configure it + using the different cards, a different D-channel protocol, or + non-standard IRQ/port settings. + +config HISAX_IX1MICROR2 + bool "ITK ix1-micro Revision 2" + depends on ISA + help + This enables HiSax support for the ITK ix1-micro Revision 2 card. + + See on how to configure it + using the different cards, a different D-channel protocol, or + non-standard IRQ/port settings. + +config HISAX_DIEHLDIVA + bool "Eicon.Diehl Diva cards" + help + This enables HiSax support for the Eicon.Diehl Diva none PRO + versions passive ISDN cards. + + See on how to configure it + using the different cards, a different D-channel protocol, or + non-standard IRQ/port settings. + +config HISAX_ASUSCOM + bool "ASUSCOM ISA cards" + depends on ISA + help + This enables HiSax support for the AsusCom and their OEM versions + passive ISDN ISA cards. + + See on how to configure it + using the different cards, a different D-channel protocol, or + non-standard IRQ/port settings. + +config HISAX_TELEINT + bool "TELEINT cards" + depends on ISA + help + This enables HiSax support for the TELEINT SA1 semiactiv ISDN card. + + See on how to configure it + using the different cards, a different D-channel protocol, or + non-standard IRQ/port settings. + +config HISAX_HFCS + bool "HFC-S based cards" + depends on ISA + help + This enables HiSax support for the HFC-S 2BDS0 based cards, like + teles 16.3c. + + See on how to configure it + using the different cards, a different D-channel protocol, or + non-standard IRQ/port settings. + +config HISAX_SEDLBAUER + bool "Sedlbauer cards" + help + This enables HiSax support for the Sedlbauer passive ISDN cards. + + See on how to configure it + using the different cards, a different D-channel protocol, or + non-standard IRQ/port settings. + +config HISAX_SPORTSTER + bool "USR Sportster internal TA" + depends on ISA + help + This enables HiSax support for the USR Sportster internal TA card. + + See on how to configure it + using a different D-channel protocol, or non-standard IRQ/port + settings. + +config HISAX_MIC + bool "MIC card" + depends on ISA + help + This enables HiSax support for the ITH MIC card. + + See on how to configure it + using a different D-channel protocol, or non-standard IRQ/port + settings. + +config HISAX_NETJET + bool "NETjet card" + depends on PCI && (BROKEN || !(SPARC64 || PPC)) + help + This enables HiSax support for the NetJet from Traverse + Technologies. + + See on how to configure it + using a different D-channel protocol, or non-standard IRQ/port + settings. + +config HISAX_NETJET_U + bool "NETspider U card" + depends on PCI && (BROKEN || !(SPARC64 || PPC)) + help + This enables HiSax support for the Netspider U interface ISDN card + from Traverse Technologies. + See on how to configure it + using a different D-channel protocol, or non-standard IRQ/port + settings. + +config HISAX_NICCY + bool "Niccy PnP/PCI card" + help + This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI. + + See on how to configure it + using a different D-channel protocol, or non-standard IRQ/port + settings. + +config HISAX_ISURF + bool "Siemens I-Surf card" + depends on ISA + help + This enables HiSax support for the Siemens I-Talk/I-Surf card with + ISAR chip. + See on how to configure it + using a different D-channel protocol, or non-standard IRQ/port + settings. + +config HISAX_HSTSAPHIR + bool "HST Saphir card" + depends on ISA + help + This enables HiSax support for the HST Saphir card. + + See on how to configure it + using a different D-channel protocol, or non-standard IRQ/port + settings. + +config HISAX_BKM_A4T + bool "Telekom A4T card" + depends on PCI + help + This enables HiSax support for the Telekom A4T card. + + See on how to configure it + using a different D-channel protocol, or non-standard IRQ/port + settings. + +config HISAX_SCT_QUADRO + bool "Scitel Quadro card" + depends on PCI + help + This enables HiSax support for the Scitel Quadro card. + + See on how to configure it + using a different D-channel protocol, or non-standard IRQ/port + settings. + +config HISAX_GAZEL + bool "Gazel cards" + help + This enables HiSax support for the Gazel cards. + + See on how to configure it + using a different D-channel protocol, or non-standard IRQ/port + settings. + +config HISAX_HFC_PCI + bool "HFC PCI-Bus cards" + depends on PCI && (BROKEN || !(SPARC64 || PPC)) + help + This enables HiSax support for the HFC-S PCI 2BDS0 based cards. + + For more informations see under + . + +config HISAX_W6692 + bool "Winbond W6692 based cards" + depends on PCI + help + This enables HiSax support for Winbond W6692 based PCI ISDN cards. + + See on how to configure it + using a different D-channel protocol, or non-standard IRQ/port + settings. + +config HISAX_HFC_SX + bool "HFC-S+, HFC-SP, HFC-PCMCIA cards" + help + This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA + cards. This code is not finished yet. + +# bool ' TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU + +config HISAX_ENTERNOW_PCI + bool "Formula-n enter:now PCI card" + depends on PCI && (BROKEN || !(SPARC64 || PPC)) + help + This enables HiSax support for the Formula-n enter:now PCI + ISDN card. + +config HISAX_AMD7930 + bool "Am7930 (EXPERIMENTAL)" + depends on EXPERIMENTAL && (SPARC32 || SPARC64) + help + This enables HiSax support for the AMD7930 chips on some SPARCs. + This code is not finished yet. + +endif + +if ISDN_DRV_HISAX + +config HISAX_DEBUG + bool "HiSax debugging" + help + This enables debugging code in the new-style HiSax drivers, i.e. + the ST5481 USB driver currently. + If in doubt, say yes. + +comment "HiSax PCMCIA card service modules" + +config HISAX_SEDLBAUER_CS + tristate "Sedlbauer PCMCIA cards" + depends on PCMCIA && HISAX_SEDLBAUER + help + This enables the PCMCIA client driver for the Sedlbauer Speed Star + and Speed Star II cards. + +config HISAX_ELSA_CS + tristate "ELSA PCMCIA MicroLink cards" + depends on PCMCIA && HISAX_ELSA + help + This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink + card. + +config HISAX_AVM_A1_CS + tristate "AVM A1 PCMCIA cards" + depends on PCMCIA && ISDN_DRV_HISAX + help + This enables the PCMCIA client driver for the AVM A1 / Fritz!Card + PCMCIA cards. + +config HISAX_TELES_CS + tristate "TELES PCMCIA cards" + depends on PCMCIA && HISAX_16_3 + help + This enables the PCMCIA client driver for the Teles PCMCIA cards. + +comment "HiSax sub driver modules" + +config HISAX_ST5481 + tristate "ST5481 USB ISDN modem (EXPERIMENTAL)" + depends on USB && EXPERIMENTAL + select CRC_CCITT + help + This enables the driver for ST5481 based USB ISDN adapters, + e.g. the BeWan Gazel 128 USB + +config HISAX_HFCUSB + tristate "HFC USB based ISDN modems (EXPERIMENTAL)" + depends on USB && EXPERIMENTAL + help + This enables the driver for HFC USB based ISDN modems. + +config HISAX_HFC4S8S + tristate "HFC-4S/8S based ISDN cards (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + This enables the driver for HFC-4S/8S based ISDN cards. + +config HISAX_FRITZ_PCIPNP + tristate "AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + help + This enables the driver for the AVM Fritz!Card PCI, + Fritz!Card PCI v2 and Fritz!Card PnP. + (the latter also needs you to select "ISA Plug and Play support" + from the menu "Plug and Play configuration") + +config HISAX_HDLC + bool + depends on HISAX_ST5481 + default y + +config HISAX_AVM_A1_PCMCIA + bool + depends on HISAX_AVM_A1_CS + default y + +endif + +endmenu + -- cgit v1.2.3