From 40bba0c1ca83a370f749c8bc9afda71cf79ebd91 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Sat, 2 Oct 2010 13:54:11 +0200 Subject: mmc: sdio: enable runtime PM for SDIO functions Enable runtime PM for SDIO functions. SDIO functions are initialized with a disabled runtime PM state, and are set active (and their usage count is incremented) only before potential drivers are probed. SDIO function drivers that support runtime PM should call pm_runtime_put_noidle() in their probe routine, and pm_runtime_get_noresume() in their remove routine (very similarly to PCI drivers). In case a matching driver does not support runtime PM, power will always be kept high (since the usage count is positive). Signed-off-by: Ohad Ben-Cohen Tested-by: Luciano Coelho Signed-off-by: Chris Ball --- drivers/mmc/core/sdio_bus.c | 38 +++++++++++++++++++++++++++++++++++--- 1 file changed, 35 insertions(+), 3 deletions(-) (limited to 'drivers/mmc/core/sdio_bus.c') diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 256a968774a0..36374834fcff 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -126,21 +126,46 @@ static int sdio_bus_probe(struct device *dev) if (!id) return -ENODEV; + /* Unbound SDIO functions are always suspended. + * During probe, the function is set active and the usage count + * is incremented. If the driver supports runtime PM, + * it should call pm_runtime_put_noidle() in its probe routine and + * pm_runtime_get_noresume() in its remove routine. + */ + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto out; + /* Set the default block size so the driver is sure it's something * sensible. */ sdio_claim_host(func); ret = sdio_set_block_size(func, 0); sdio_release_host(func); if (ret) - return ret; + goto disable_runtimepm; + + ret = drv->probe(func, id); + if (ret) + goto disable_runtimepm; - return drv->probe(func, id); + return 0; + +disable_runtimepm: + pm_runtime_put_noidle(dev); +out: + return ret; } static int sdio_bus_remove(struct device *dev) { struct sdio_driver *drv = to_sdio_driver(dev->driver); struct sdio_func *func = dev_to_sdio_func(dev); + int ret; + + /* Make sure card is powered before invoking ->remove() */ + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto out; drv->remove(func); @@ -152,7 +177,14 @@ static int sdio_bus_remove(struct device *dev) sdio_release_host(func); } - return 0; + /* First, undo the increment made directly above */ + pm_runtime_put_noidle(dev); + + /* Then undo the runtime PM settings in sdio_bus_probe() */ + pm_runtime_put_noidle(dev); + +out: + return ret; } #ifdef CONFIG_PM_RUNTIME -- cgit v1.2.3