From 289c05222172b51401dbbb017115655f241d94ab Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 19 Jul 2011 10:06:09 -0700 Subject: mtd: replace DEBUG() with pr_debug() Start moving away from the MTD_DEBUG_LEVEL messages. The dynamic debugging feature is a generic kernel feature that provides more flexibility. (See Documentation/dynamic-debug-howto.txt) Also fix some punctuation, indentation, and capitalization that went along with the affected lines. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy --- drivers/mtd/chips/jedec_probe.c | 32 ++++++++++++-------------------- 1 file changed, 12 insertions(+), 20 deletions(-) (limited to 'drivers/mtd/chips/jedec_probe.c') diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index d40c410a3241..c443f527a53a 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -1917,8 +1917,7 @@ static void jedec_reset(u32 base, struct map_info *map, struct cfi_private *cfi) * as they will ignore the writes and don't care what address * the F0 is written to */ if (cfi->addr_unlock1) { - DEBUG( MTD_DEBUG_LEVEL3, - "reset unlock called %x %x \n", + pr_debug( "reset unlock called %x %x \n", cfi->addr_unlock1,cfi->addr_unlock2); cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL); @@ -1941,7 +1940,7 @@ static int cfi_jedec_setup(struct map_info *map, struct cfi_private *cfi, int in uint8_t uaddr; if (!(jedec_table[index].devtypes & cfi->device_type)) { - DEBUG(MTD_DEBUG_LEVEL1, "Rejecting potential %s with incompatible %d-bit device type\n", + pr_debug("Rejecting potential %s with incompatible %d-bit device type\n", jedec_table[index].name, 4 * (1<device_type)); return 0; } @@ -2021,7 +2020,7 @@ static inline int jedec_match( uint32_t base, * there aren't. */ if (finfo->dev_id > 0xff) { - DEBUG( MTD_DEBUG_LEVEL3, "%s(): ID is not 8bit\n", + pr_debug("%s(): ID is not 8bit\n", __func__); goto match_done; } @@ -2045,12 +2044,10 @@ static inline int jedec_match( uint32_t base, } /* the part size must fit in the memory window */ - DEBUG( MTD_DEBUG_LEVEL3, - "MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n", + pr_debug("MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n", __func__, base, 1 << finfo->dev_size, base + (1 << finfo->dev_size) ); if ( base + cfi_interleave(cfi) * ( 1 << finfo->dev_size ) > map->size ) { - DEBUG( MTD_DEBUG_LEVEL3, - "MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n", + pr_debug("MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n", __func__, finfo->mfr_id, finfo->dev_id, 1 << finfo->dev_size ); goto match_done; @@ -2061,13 +2058,12 @@ static inline int jedec_match( uint32_t base, uaddr = finfo->uaddr; - DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n", + pr_debug("MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n", __func__, cfi->addr_unlock1, cfi->addr_unlock2 ); if ( MTD_UADDR_UNNECESSARY != uaddr && MTD_UADDR_DONT_CARE != uaddr && ( unlock_addrs[uaddr].addr1 / cfi->device_type != cfi->addr_unlock1 || unlock_addrs[uaddr].addr2 / cfi->device_type != cfi->addr_unlock2 ) ) { - DEBUG( MTD_DEBUG_LEVEL3, - "MTD %s(): 0x%.4x 0x%.4x did not match\n", + pr_debug("MTD %s(): 0x%.4x 0x%.4x did not match\n", __func__, unlock_addrs[uaddr].addr1, unlock_addrs[uaddr].addr2); @@ -2083,15 +2079,13 @@ static inline int jedec_match( uint32_t base, * FIXME - write a driver that takes all of the chip info as * module parameters, doesn't probe but forces a load. */ - DEBUG( MTD_DEBUG_LEVEL3, - "MTD %s(): check ID's disappear when not in ID mode\n", + pr_debug("MTD %s(): check ID's disappear when not in ID mode\n", __func__ ); jedec_reset( base, map, cfi ); mfr = jedec_read_mfr( map, base, cfi ); id = jedec_read_id( map, base, cfi ); if ( mfr == cfi->mfr && id == cfi->id ) { - DEBUG( MTD_DEBUG_LEVEL3, - "MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n" + pr_debug("MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n" "You might need to manually specify JEDEC parameters.\n", __func__, cfi->mfr, cfi->id ); goto match_done; @@ -2104,7 +2098,7 @@ static inline int jedec_match( uint32_t base, * Put the device back in ID mode - only need to do this if we * were truly frobbing a real device. */ - DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): return to ID mode\n", __func__ ); + pr_debug("MTD %s(): return to ID mode\n", __func__ ); if (cfi->addr_unlock1) { cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL); @@ -2167,13 +2161,11 @@ static int jedec_probe_chip(struct map_info *map, __u32 base, cfi->mfr = jedec_read_mfr(map, base, cfi); cfi->id = jedec_read_id(map, base, cfi); - DEBUG(MTD_DEBUG_LEVEL3, - "Search for id:(%02x %02x) interleave(%d) type(%d)\n", + pr_debug("Search for id:(%02x %02x) interleave(%d) type(%d)\n", cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type); for (i = 0; i < ARRAY_SIZE(jedec_table); i++) { if ( jedec_match( base, map, cfi, &jedec_table[i] ) ) { - DEBUG( MTD_DEBUG_LEVEL3, - "MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n", + pr_debug("MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n", __func__, cfi->mfr, cfi->id, cfi->addr_unlock1, cfi->addr_unlock2 ); if (!cfi_jedec_setup(map, cfi, i)) -- cgit v1.2.3