From 5795f533f30a80aa0473652876296ebc9129e33a Mon Sep 17 00:00:00 2001 From: Jedrzej Jagielski Date: Mon, 18 Dec 2023 11:39:26 +0100 Subject: ixgbe: Refactor returning internal error codes Change returning codes to the kernel ones instead of the internal ones for the entire ixgbe driver. Reviewed-by: Jacob Keller Reviewed-by: Przemek Kitszel Reviewed-by: Simon Horman Signed-off-by: Jedrzej Jagielski Tested-by: Sunitha Mekala (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 84 ++++++++++++++-------------- 1 file changed, 42 insertions(+), 42 deletions(-) (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 73b9c35acfd7..f28140a05f09 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -102,7 +102,7 @@ s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, csum = ~csum; do { if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; ixgbe_i2c_start(hw); /* Device Address and write indication */ if (ixgbe_out_i2c_byte_ack(hw, addr)) @@ -150,7 +150,7 @@ fail: hw_dbg(hw, "I2C byte read combined error.\n"); } while (retry < max_retry); - return IXGBE_ERR_I2C; + return -EIO; } /** @@ -179,7 +179,7 @@ s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, csum = ~csum; do { if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; ixgbe_i2c_start(hw); /* Device Address and write indication */ if (ixgbe_out_i2c_byte_ack(hw, addr)) @@ -215,7 +215,7 @@ fail: hw_dbg(hw, "I2C byte write combined error.\n"); } while (retry < max_retry); - return IXGBE_ERR_I2C; + return -EIO; } /** @@ -262,8 +262,8 @@ static bool ixgbe_probe_phy(struct ixgbe_hw *hw, u16 phy_addr) **/ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) { + u32 status = -EFAULT; u32 phy_addr; - u32 status = IXGBE_ERR_PHY_ADDR_INVALID; if (!hw->phy.phy_semaphore_mask) { if (hw->bus.lan_id) @@ -281,7 +281,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) if (ixgbe_probe_phy(hw, phy_addr)) return 0; else - return IXGBE_ERR_PHY_ADDR_INVALID; + return -EFAULT; } for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) { @@ -455,7 +455,7 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) if (ctrl & MDIO_CTRL1_RESET) { hw_dbg(hw, "PHY reset polling failed to complete.\n"); - return IXGBE_ERR_RESET_FAILED; + return -EIO; } return 0; @@ -498,7 +498,7 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { hw_dbg(hw, "PHY address command did not complete.\n"); - return IXGBE_ERR_PHY; + return -EIO; } /* Address cycle complete, setup and write the read @@ -525,7 +525,7 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { hw_dbg(hw, "PHY read command didn't complete\n"); - return IXGBE_ERR_PHY; + return -EIO; } /* Read operation is complete. Get the data @@ -557,7 +557,7 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, phy_data); hw->mac.ops.release_swfw_sync(hw, gssr); } else { - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; } return status; @@ -602,7 +602,7 @@ s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { hw_dbg(hw, "PHY address cmd didn't complete\n"); - return IXGBE_ERR_PHY; + return -EIO; } /* @@ -630,7 +630,7 @@ s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { hw_dbg(hw, "PHY write cmd didn't complete\n"); - return IXGBE_ERR_PHY; + return -EIO; } return 0; @@ -655,7 +655,7 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, phy_data); hw->mac.ops.release_swfw_sync(hw, gssr); } else { - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; } return status; @@ -1428,7 +1428,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) if ((phy_data & MDIO_CTRL1_RESET) != 0) { hw_dbg(hw, "PHY reset did not complete.\n"); - return IXGBE_ERR_PHY; + return -EIO; } /* Get init offsets */ @@ -1484,12 +1484,12 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) hw_dbg(hw, "SOL\n"); } else { hw_dbg(hw, "Bad control value\n"); - return IXGBE_ERR_PHY; + return -EIO; } break; default: hw_dbg(hw, "Bad control type\n"); - return IXGBE_ERR_PHY; + return -EIO; } } @@ -1497,7 +1497,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) err_eeprom: hw_err(hw, "eeprom read at offset %d failed\n", data_offset); - return IXGBE_ERR_PHY; + return -EIO; } /** @@ -1515,10 +1515,10 @@ s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw) return ixgbe_identify_qsfp_module_generic(hw); default: hw->phy.sfp_type = ixgbe_sfp_type_not_present; - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; } - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; } /** @@ -1543,7 +1543,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) { hw->phy.sfp_type = ixgbe_sfp_type_not_present; - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; } /* LAN ID is needed for sfp_type determination */ @@ -1558,7 +1558,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) if (identifier != IXGBE_SFF_IDENTIFIER_SFP) { hw->phy.type = ixgbe_phy_sfp_unsupported; - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_1GBE_COMP_CODES, @@ -1749,7 +1749,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { hw->phy.type = ixgbe_phy_sfp_unsupported; - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } /* Anything else 82598-based is supported */ @@ -1773,7 +1773,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) } hw_dbg(hw, "SFP+ module not supported\n"); hw->phy.type = ixgbe_phy_sfp_unsupported; - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } return 0; @@ -1783,7 +1783,7 @@ err_read_i2c_eeprom: hw->phy.id = 0; hw->phy.type = ixgbe_phy_unknown; } - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; } /** @@ -1810,7 +1810,7 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) { hw->phy.sfp_type = ixgbe_sfp_type_not_present; - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; } /* LAN ID is needed for sfp_type determination */ @@ -1824,7 +1824,7 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) { hw->phy.type = ixgbe_phy_sfp_unsupported; - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } hw->phy.id = identifier; @@ -1892,7 +1892,7 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) } else { /* unsupported module type */ hw->phy.type = ixgbe_phy_sfp_unsupported; - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } } @@ -1952,7 +1952,7 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) } hw_dbg(hw, "QSFP module not supported\n"); hw->phy.type = ixgbe_phy_sfp_unsupported; - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } return 0; } @@ -1963,7 +1963,7 @@ err_read_i2c_eeprom: hw->phy.id = 0; hw->phy.type = ixgbe_phy_unknown; - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; } /** @@ -1983,14 +1983,14 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, u16 sfp_type = hw->phy.sfp_type; if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) - return IXGBE_ERR_SFP_NOT_PRESENT; + return -ENOENT; if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) && (hw->phy.sfp_type == ixgbe_sfp_type_da_cu)) - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; /* * Limiting active cables and 1G Phys must be initialized as @@ -2011,11 +2011,11 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) { hw_err(hw, "eeprom read at %d failed\n", IXGBE_PHY_INIT_OFFSET_NL); - return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; + return -EIO; } if ((!*list_offset) || (*list_offset == 0xFFFF)) - return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; + return -EIO; /* Shift offset to first ID word */ (*list_offset)++; @@ -2034,7 +2034,7 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, goto err_phy; if ((!*data_offset) || (*data_offset == 0xFFFF)) { hw_dbg(hw, "SFP+ module not supported\n"); - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } else { break; } @@ -2047,14 +2047,14 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, if (sfp_id == IXGBE_PHY_INIT_END_NL) { hw_dbg(hw, "No matching SFP+ module found\n"); - return IXGBE_ERR_SFP_NOT_SUPPORTED; + return -EOPNOTSUPP; } return 0; err_phy: hw_err(hw, "eeprom read at offset %d failed\n", *list_offset); - return IXGBE_ERR_PHY; + return -EIO; } /** @@ -2149,7 +2149,7 @@ static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, do { if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; ixgbe_i2c_start(hw); @@ -2265,7 +2265,7 @@ static s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, u32 swfw_mask = hw->phy.phy_semaphore_mask; if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) - return IXGBE_ERR_SWFW_SYNC; + return -EBUSY; do { ixgbe_i2c_start(hw); @@ -2507,7 +2507,7 @@ static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) if (ack == 1) { hw_dbg(hw, "I2C ack was not received.\n"); - status = IXGBE_ERR_I2C; + status = -EIO; } ixgbe_lower_i2c_clk(hw, &i2cctl); @@ -2579,7 +2579,7 @@ static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) udelay(IXGBE_I2C_T_LOW); } else { hw_dbg(hw, "I2C data was not set to %X\n", data); - return IXGBE_ERR_I2C; + return -EIO; } return 0; @@ -2675,7 +2675,7 @@ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); if (data != ixgbe_get_i2c_data(hw, i2cctl)) { hw_dbg(hw, "Error - I2C data was not set to %X.\n", data); - return IXGBE_ERR_I2C; + return -EIO; } return 0; -- cgit v1.2.3