From 6f4da3f897906d0e1f27e3e44bd445f8e6d7bd85 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Sun, 17 May 2015 21:44:49 +0200 Subject: at86rf230: rework tx power support This patch adds support for get transmit power levels and reworks the set of transmit power levels which was broken before. Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 83 +++++++++++++++++++++++++++++--------- 1 file changed, 64 insertions(+), 19 deletions(-) (limited to 'drivers/net/ieee802154/at86rf230.c') diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index fabde3ac49b3..dff7e47f5afb 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -51,6 +51,7 @@ struct at86rf2xx_chip_data { int (*set_channel)(struct at86rf230_local *, u8, u8); int (*get_desense_steps)(struct at86rf230_local *, s32); + int (*set_txpower)(struct at86rf230_local *, s32); }; #define AT86RF2XX_MAX_BUF (127 + 3) @@ -124,9 +125,12 @@ struct at86rf230_local { #define SR_IRQ_2_EXT_EN 0x04, 0x40, 6 #define SR_PA_EXT_EN 0x04, 0x80, 7 #define RG_PHY_TX_PWR (0x05) -#define SR_TX_PWR 0x05, 0x0f, 0 -#define SR_PA_LT 0x05, 0x30, 4 -#define SR_PA_BUF_LT 0x05, 0xc0, 6 +#define SR_TX_PWR_23X 0x05, 0x0f, 0 +#define SR_PA_LT_230 0x05, 0x30, 4 +#define SR_PA_BUF_LT_230 0x05, 0xc0, 6 +#define SR_TX_PWR_212 0x05, 0x1f, 0 +#define SR_GC_PA_212 0x05, 0x60, 5 +#define SR_PA_BOOST_LT_212 0x05, 0x80, 7 #define RG_PHY_RSSI (0x06) #define SR_RSSI 0x06, 0x1f, 0 #define SR_RND_VALUE 0x06, 0x60, 5 @@ -1193,24 +1197,56 @@ at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw, return 0; } +#define AT86RF23X_MAX_TX_POWERS 0xF +static const s32 at86rf233_powers[AT86RF23X_MAX_TX_POWERS + 1] = { + 400, 370, 340, 300, 250, 200, 100, 0, -100, -200, -300, -400, -600, + -800, -1200, -1700, +}; + +static const s32 at86rf231_powers[AT86RF23X_MAX_TX_POWERS + 1] = { + 300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700, + -900, -1200, -1700, +}; + +#define AT86RF212_MAX_TX_POWERS 0x1F +static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = { + 500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700, + -800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700, + -1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600, +}; + static int -at86rf230_set_txpower(struct ieee802154_hw *hw, s32 mbm) +at86rf23x_set_txpower(struct at86rf230_local *lp, s32 mbm) { - struct at86rf230_local *lp = hw->priv; - s8 db = mbm / 100; + u32 i; - /* typical maximum output is 5dBm with RG_PHY_TX_PWR 0x60, lower five - * bits decrease power in 1dB steps. 0x60 represents extra PA gain of - * 0dB. - * thus, supported values for db range from -26 to 5, for 31dB of - * reduction to 0dB of reduction. - */ - if (db > 5 || db < -26) - return -EINVAL; + for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) { + if (lp->hw->phy->supported.tx_powers[i] == mbm) + return at86rf230_write_subreg(lp, SR_TX_PWR_23X, i); + } + + return -EINVAL; +} + +static int +at86rf212_set_txpower(struct at86rf230_local *lp, s32 mbm) +{ + u32 i; + + for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) { + if (lp->hw->phy->supported.tx_powers[i] == mbm) + return at86rf230_write_subreg(lp, SR_TX_PWR_212, i); + } - db = -(db - 5); + return -EINVAL; +} + +static int +at86rf230_set_txpower(struct ieee802154_hw *hw, s32 mbm) +{ + struct at86rf230_local *lp = hw->priv; - return __at86rf230_write(lp, RG_PHY_TX_PWR, 0x60 | db); + return lp->data->set_txpower(lp, mbm); } static int @@ -1367,7 +1403,8 @@ static struct at86rf2xx_chip_data at86rf233_data = { .t_p_ack = 545, .rssi_base_val = -91, .set_channel = at86rf23x_set_channel, - .get_desense_steps = at86rf23x_get_desens_steps + .get_desense_steps = at86rf23x_get_desens_steps, + .set_txpower = at86rf23x_set_txpower, }; static struct at86rf2xx_chip_data at86rf231_data = { @@ -1380,7 +1417,8 @@ static struct at86rf2xx_chip_data at86rf231_data = { .t_p_ack = 545, .rssi_base_val = -91, .set_channel = at86rf23x_set_channel, - .get_desense_steps = at86rf23x_get_desens_steps + .get_desense_steps = at86rf23x_get_desens_steps, + .set_txpower = at86rf23x_set_txpower, }; static struct at86rf2xx_chip_data at86rf212_data = { @@ -1393,7 +1431,8 @@ static struct at86rf2xx_chip_data at86rf212_data = { .t_p_ack = 545, .rssi_base_val = -100, .set_channel = at86rf212_set_channel, - .get_desense_steps = at86rf212_get_desens_steps + .get_desense_steps = at86rf212_get_desens_steps, + .set_txpower = at86rf212_set_txpower, }; static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim) @@ -1592,6 +1631,8 @@ at86rf230_detect_device(struct at86rf230_local *lp) lp->hw->phy->supported.channels[0] = 0x7FFF800; lp->hw->phy->current_channel = 11; lp->hw->phy->symbol_duration = 16; + lp->hw->phy->supported.tx_powers = at86rf231_powers; + lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf231_powers); break; case 7: chip = "at86rf212"; @@ -1602,6 +1643,8 @@ at86rf230_detect_device(struct at86rf230_local *lp) lp->hw->phy->current_channel = 5; lp->hw->phy->symbol_duration = 25; lp->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH; + lp->hw->phy->supported.tx_powers = at86rf212_powers; + lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers); break; case 11: chip = "at86rf233"; @@ -1609,6 +1652,8 @@ at86rf230_detect_device(struct at86rf230_local *lp) lp->hw->phy->supported.channels[0] = 0x7FFF800; lp->hw->phy->current_channel = 13; lp->hw->phy->symbol_duration = 16; + lp->hw->phy->supported.tx_powers = at86rf233_powers; + lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf233_powers); break; default: chip = "unknown"; -- cgit v1.2.3