From 72d6b2459dbd539c1369149e501fdc3dc8ddef16 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 15 Jan 2021 08:32:39 +0100 Subject: pwm: iqs620a: Fix overflow and optimize calculations MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If state->duty_cycle is 0x100000000000000, the previous calculation of duty_scale overflows and yields a duty cycle ratio of 0% instead of 100%. Fix this by clamping the requested duty cycle to the maximal possible duty cycle first. This way it is possible to use a native integer division instead of a (depending on the architecture) more expensive 64bit division. With this change in place duty_scale cannot be bigger than 256 which allows to simplify the calculation of duty_val. Fixes: 6f0841a8197b ("pwm: Add support for Azoteq IQS620A PWM generator") Tested-by: Jeff LaBundy Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- drivers/pwm/pwm-iqs620a.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/pwm/pwm-iqs620a.c') diff --git a/drivers/pwm/pwm-iqs620a.c b/drivers/pwm/pwm-iqs620a.c index 5ede8255926e..14b18fb4f527 100644 --- a/drivers/pwm/pwm-iqs620a.c +++ b/drivers/pwm/pwm-iqs620a.c @@ -46,7 +46,8 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, { struct iqs620_pwm_private *iqs620_pwm; struct iqs62x_core *iqs62x; - u64 duty_scale; + unsigned int duty_cycle; + unsigned int duty_scale; int ret; if (state->polarity != PWM_POLARITY_NORMAL) @@ -70,7 +71,8 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, * For lower duty cycles (e.g. 0), the PWM output is simply disabled to * allow an external pull-down resistor to hold the GPIO3/LTX pin low. */ - duty_scale = div_u64(state->duty_cycle * 256, IQS620_PWM_PERIOD_NS); + duty_cycle = min_t(u64, state->duty_cycle, IQS620_PWM_PERIOD_NS); + duty_scale = duty_cycle * 256 / IQS620_PWM_PERIOD_NS; mutex_lock(&iqs620_pwm->lock); @@ -82,7 +84,7 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, } if (duty_scale) { - u8 duty_val = min_t(u64, duty_scale - 1, 0xff); + u8 duty_val = duty_scale - 1; ret = regmap_write(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE, duty_val); -- cgit v1.2.3