From bd88d319abe9a4bb6cc63b23cc760bec46e81fe6 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 17 Oct 2019 17:11:41 +0200 Subject: pwm: imx27: Unconditionally write state to hardware MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The i.MX driver currently uses a shortcut and doesn't write all of the state through to the hardware when the PWM is disabled. This causes an inconsistent state to be read back by consumers with the result of them malfunctioning. Fix this by always writing the full state through to the hardware registers so that the correct state can always be read back. Tested-by: Michal Vokáč Tested-by: Adam Ford Signed-off-by: Thierry Reding --- drivers/pwm/pwm-imx27.c | 120 ++++++++++++++++++++++++------------------------ 1 file changed, 59 insertions(+), 61 deletions(-) (limited to 'drivers/pwm') diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c index 4113d5cd4c62..59d8b1289808 100644 --- a/drivers/pwm/pwm-imx27.c +++ b/drivers/pwm/pwm-imx27.c @@ -230,70 +230,68 @@ static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm, pwm_get_state(pwm, &cstate); - if (state->enabled) { - c = clk_get_rate(imx->clk_per); - c *= state->period; - - do_div(c, 1000000000); - period_cycles = c; - - prescale = period_cycles / 0x10000 + 1; - - period_cycles /= prescale; - c = (unsigned long long)period_cycles * state->duty_cycle; - do_div(c, state->period); - duty_cycles = c; - - /* - * according to imx pwm RM, the real period value should be - * PERIOD value in PWMPR plus 2. - */ - if (period_cycles > 2) - period_cycles -= 2; - else - period_cycles = 0; - - /* - * Wait for a free FIFO slot if the PWM is already enabled, and - * flush the FIFO if the PWM was disabled and is about to be - * enabled. - */ - if (cstate.enabled) { - pwm_imx27_wait_fifo_slot(chip, pwm); - } else { - ret = pwm_imx27_clk_prepare_enable(chip); - if (ret) - return ret; - - pwm_imx27_sw_reset(chip); - } - - writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); - writel(period_cycles, imx->mmio_base + MX3_PWMPR); - - /* - * Store the duty cycle for future reference in cases where - * the MX3_PWMSAR register can't be read (i.e. when the PWM - * is disabled). - */ - imx->duty_cycle = duty_cycles; - - cr = MX3_PWMCR_PRESCALER_SET(prescale) | - MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN | - FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) | - MX3_PWMCR_DBGEN | MX3_PWMCR_EN; - - if (state->polarity == PWM_POLARITY_INVERSED) - cr |= FIELD_PREP(MX3_PWMCR_POUTC, - MX3_PWMCR_POUTC_INVERTED); - - writel(cr, imx->mmio_base + MX3_PWMCR); - } else if (cstate.enabled) { - writel(0, imx->mmio_base + MX3_PWMCR); + c = clk_get_rate(imx->clk_per); + c *= state->period; - pwm_imx27_clk_disable_unprepare(chip); + do_div(c, 1000000000); + period_cycles = c; + + prescale = period_cycles / 0x10000 + 1; + + period_cycles /= prescale; + c = (unsigned long long)period_cycles * state->duty_cycle; + do_div(c, state->period); + duty_cycles = c; + + /* + * according to imx pwm RM, the real period value should be PERIOD + * value in PWMPR plus 2. + */ + if (period_cycles > 2) + period_cycles -= 2; + else + period_cycles = 0; + + /* + * Wait for a free FIFO slot if the PWM is already enabled, and flush + * the FIFO if the PWM was disabled and is about to be enabled. + */ + if (cstate.enabled) { + pwm_imx27_wait_fifo_slot(chip, pwm); + } else { + ret = pwm_imx27_clk_prepare_enable(chip); + if (ret) + return ret; + + pwm_imx27_sw_reset(chip); } + writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); + writel(period_cycles, imx->mmio_base + MX3_PWMPR); + + /* + * Store the duty cycle for future reference in cases where the + * MX3_PWMSAR register can't be read (i.e. when the PWM is disabled). + */ + imx->duty_cycle = duty_cycles; + + cr = MX3_PWMCR_PRESCALER_SET(prescale) | + MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN | + FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) | + MX3_PWMCR_DBGEN; + + if (state->polarity == PWM_POLARITY_INVERSED) + cr |= FIELD_PREP(MX3_PWMCR_POUTC, + MX3_PWMCR_POUTC_INVERTED); + + if (state->enabled) + cr |= MX3_PWMCR_EN; + + writel(cr, imx->mmio_base + MX3_PWMCR); + + if (!state->enabled && cstate.enabled) + pwm_imx27_clk_disable_unprepare(chip); + return 0; } -- cgit v1.2.3