From 1e786b03705938870dafb629f2248f88d507a0ff Mon Sep 17 00:00:00 2001 From: Mike Looijmans Date: Mon, 21 Aug 2023 09:20:13 +0200 Subject: rtc: pcf85363: Allow to wake up system without IRQ When wakeup-source is set in the devicetree, set up the device for using the output as interrupt instead of clock. This is similar to how other RTC devices handle this. This allows the clock chip to turn on the board when wired to do so in hardware. Signed-off-by: Mike Looijmans Link: https://lore.kernel.org/r/20230821072013.7072-1-mike.looijmans@topic.nl Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-pcf85363.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) (limited to 'drivers/rtc') diff --git a/drivers/rtc/rtc-pcf85363.c b/drivers/rtc/rtc-pcf85363.c index 569c79bac0ee..06194674d71c 100644 --- a/drivers/rtc/rtc-pcf85363.c +++ b/drivers/rtc/rtc-pcf85363.c @@ -402,6 +402,7 @@ static int pcf85363_probe(struct i2c_client *client) }, }; int ret, i, err; + bool wakeup_source; if (data) config = data; @@ -431,25 +432,36 @@ static int pcf85363_probe(struct i2c_client *client) pcf85363->rtc->ops = &rtc_ops; pcf85363->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; pcf85363->rtc->range_max = RTC_TIMESTAMP_END_2099; - clear_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features); + + wakeup_source = device_property_read_bool(&client->dev, + "wakeup-source"); + if (client->irq > 0 || wakeup_source) { + regmap_write(pcf85363->regmap, CTRL_FLAGS, 0); + regmap_update_bits(pcf85363->regmap, CTRL_PIN_IO, + PIN_IO_INTA_OUT, PIN_IO_INTAPM); + } if (client->irq > 0) { unsigned long irqflags = IRQF_TRIGGER_LOW; if (dev_fwnode(&client->dev)) irqflags = 0; - - regmap_write(pcf85363->regmap, CTRL_FLAGS, 0); - regmap_update_bits(pcf85363->regmap, CTRL_PIN_IO, - PIN_IO_INTA_OUT, PIN_IO_INTAPM); ret = devm_request_threaded_irq(&client->dev, client->irq, NULL, pcf85363_rtc_handle_irq, irqflags | IRQF_ONESHOT, "pcf85363", client); - if (ret) - dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n"); - else - set_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features); + if (ret) { + dev_warn(&client->dev, + "unable to request IRQ, alarms disabled\n"); + client->irq = 0; + } + } + + if (client->irq > 0 || wakeup_source) { + device_init_wakeup(&client->dev, true); + set_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features); + } else { + clear_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features); } ret = devm_rtc_register_device(pcf85363->rtc); -- cgit v1.2.3