From 24f6d2fd314f8580fcfd96391ce9689727d55572 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 30 Jun 2006 02:33:07 -0700 Subject: [SCSI] aic79xx: make ahd_done_with_status() static This patch makes a needlessly global function static. Signed-off-by: Adrian Bunk Acked-by: Hannes Reinecke Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/aic7xxx/aic79xx_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index a1e8ca758594..653818d2f802 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -7289,7 +7289,7 @@ ahd_reset_cmds_pending(struct ahd_softc *ahd) ahd->flags &= ~AHD_UPDATE_PEND_CMDS; } -void +static void ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status) { cam_status ostat; -- cgit v1.2.3 From c9fefeb26457b87f4a767faefcf77321bb90db52 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 2 Jul 2006 11:10:18 -0500 Subject: [SCSI] scsi_transport_sas: add unindexed ports Some SAS HBAs don't want to go to the trouble of tracking port numbers, so they'd simply like to say "add this port and give it a number". This is especially beneficial from the hotplug point of view, since tracking ports and the available number space can be a real pain. The current implementation uses an incrementing number per expander to add the port on. However, since there can never be more ports than there are phys, a later implementation will try to be more intelligent about this. Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_sas.c | 36 +++++++++++++++++++++++++++++++++++- include/scsi/scsi_transport_sas.h | 4 +++- 2 files changed, 38 insertions(+), 2 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index dd075627e605..9bb4e37a1a61 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -41,6 +41,7 @@ struct sas_host_attrs { struct mutex lock; u32 next_target_id; u32 next_expander_id; + int next_port_id; }; #define to_sas_host_attrs(host) ((struct sas_host_attrs *)(host)->shost_data) @@ -146,6 +147,7 @@ static int sas_host_setup(struct transport_container *tc, struct device *dev, mutex_init(&sas_host->lock); sas_host->next_target_id = 0; sas_host->next_expander_id = 0; + sas_host->next_port_id = 0; return 0; } @@ -327,7 +329,7 @@ sas_phy_protocol_attr(identify.target_port_protocols, sas_phy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n", unsigned long long); sas_phy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8); -//sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", u8); +//sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", int); sas_phy_linkspeed_attr(negotiated_linkrate); sas_phy_linkspeed_attr(minimum_linkrate_hw); sas_phy_linkspeed_attr(minimum_linkrate); @@ -590,6 +592,38 @@ struct sas_port *sas_port_alloc(struct device *parent, int port_id) } EXPORT_SYMBOL(sas_port_alloc); +/** sas_port_alloc_num - allocate and initialize a SAS port structure + * + * @parent: parent device + * + * Allocates a SAS port structure and a number to go with it. This + * interface is really for adapters where the port number has no + * meansing, so the sas class should manage them. It will be added to + * the device tree below the device specified by @parent which must be + * either a Scsi_Host or a sas_expander_device. + * + * Returns %NULL on error + */ +struct sas_port *sas_port_alloc_num(struct device *parent) +{ + int index; + struct Scsi_Host *shost = dev_to_shost(parent); + struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); + + /* FIXME: use idr for this eventually */ + mutex_lock(&sas_host->lock); + if (scsi_is_sas_expander_device(parent)) { + struct sas_rphy *rphy = dev_to_rphy(parent); + struct sas_expander_device *exp = rphy_to_expander_device(rphy); + + index = exp->next_port_id++; + } else + index = sas_host->next_port_id++; + mutex_unlock(&sas_host->lock); + return sas_port_alloc(parent, index); +} +EXPORT_SYMBOL(sas_port_alloc_num); + /** * sas_port_add - add a SAS port to the device hierarchy * diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index e3c503cd175e..f5772ff61d0d 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -106,6 +106,7 @@ struct sas_end_device { struct sas_expander_device { int level; + int next_port_id; #define SAS_EXPANDER_VENDOR_ID_LEN 8 char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1]; @@ -127,7 +128,7 @@ struct sas_expander_device { struct sas_port { struct device dev; - u8 port_identifier; + int port_identifier; int num_phys; /* the other end of the link */ @@ -168,6 +169,7 @@ extern void sas_rphy_delete(struct sas_rphy *); extern int scsi_is_sas_rphy(const struct device *); struct sas_port *sas_port_alloc(struct device *, int); +struct sas_port *sas_port_alloc_num(struct device *); int sas_port_add(struct sas_port *); void sas_port_free(struct sas_port *); void sas_port_delete(struct sas_port *); -- cgit v1.2.3 From a507c6a2d91c52615bd3bb5a8ff439d9e8530939 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Sun, 2 Jul 2006 13:48:10 -0400 Subject: [SCSI] update additional sense codes and some opcode names Following on from my post titled: "additional sense codes need update" see the attachment against lk 2.6.17 . ChangeLog: - update additional sense codes table to agree with SPC-4 revision 5a (14 June 2006) - adjust some of the opcode names Signed-off-by: Douglas Gilbert Signed-off-by: James Bottomley --- drivers/scsi/constants.c | 126 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 88 insertions(+), 38 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index dddd2acce76f..61f6024b61ba 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -5,6 +5,7 @@ * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002) * by D. Gilbert and aeb (20020609) * Additions for SPC-3 T10/1416-D Rev 21 22 Sept 2004, D. Gilbert 20041025 + * Update to SPC-4 T10/1713-D Rev 5a, 14 June 2006, D. Gilbert 20060702 */ #include @@ -36,55 +37,56 @@ static const char * cdb_byte0_names[] = { /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense", /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL, "Reasssign Blocks", -/* 08-0d */ "Read (6)", NULL, "Write (6)", "Seek (6)", NULL, NULL, +/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL, /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry", -/* 13-16 */ "Verify (6)", "Recover Buffered Data", "Mode Select (6)", - "Reserve (6)", -/* 17-1a */ "Release (6)", "Copy", "Erase", "Mode Sense (6)", +/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)", + "Reserve(6)", +/* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)", /* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic", /* 1e-1f */ "Prevent/Allow Medium Removal", NULL, /* 20-22 */ NULL, NULL, NULL, /* 23-28 */ "Read Format Capacities", "Set Window", - "Read Capacity (10)", NULL, NULL, "Read (10)", -/* 29-2d */ "Read Generation", "Write (10)", "Seek (10)", "Erase (10)", - "Read updated block", -/* 2e-31 */ "Write Verify (10)", "Verify (10)", "Search High", "Search Equal", + "Read Capacity(10)", NULL, NULL, "Read(10)", +/* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)", + "Read updated block", +/* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal", /* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position", -/* 35-37 */ "Synchronize Cache (10)", "Lock/Unlock Cache (10)", +/* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)", "Read Defect Data(10)", /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", "Read Buffer", -/* 3d-3f */ "Update Block", "Read Long (10)", "Write Long (10)", -/* 40-41 */ "Change Definition", "Write Same (10)", +/* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)", +/* 40-41 */ "Change Definition", "Write Same(10)", /* 42-48 */ "Read sub-channel", "Read TOC/PMA/ATIP", "Read density support", - "Play audio (10)", "Get configuration", "Play audio msf", + "Play audio(10)", "Get configuration", "Play audio msf", "Play audio track/index", -/* 49-4f */ "Play track relative (10)", "Get event status notification", +/* 49-4f */ "Play track relative(10)", "Get event status notification", "Pause/resume", "Log Select", "Log Sense", "Stop play/scan", NULL, /* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info", - "Reserve track", "Send OPC info", "Mode Select (10)", -/* 56-5b */ "Reserve (10)", "Release (10)", "Repair track", "Read master cue", - "Mode Sense (10)", "Close track/session", + "Reserve track", "Send OPC info", "Mode Select(10)", +/* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue", + "Mode Sense(10)", "Close track/session", /* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in", "Persistent reserve out", /* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, "Variable length", -/* 80-84 */ "Xdwrite (16)", "Rebuild (16)", "Regenerate (16)", "Extended copy", +/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy", "Receive copy results", -/* 85-89 */ "Memory Export In (16)", "Access control in", "Access control out", - "Read (16)", "Memory Export Out (16)", -/* 8a-8f */ "Write (16)", NULL, "Read attributes", "Write attributes", - "Write and verify (16)", "Verify (16)", -/* 90-94 */ "Pre-fetch (16)", "Synchronize cache (16)", - "Lock/unlock cache (16)", "Write same (16)", NULL, +/* 85-89 */ "ATA command pass through(16)", "Access control in", + "Access control out", "Read(16)", "Memory Export Out(16)", +/* 8a-8f */ "Write(16)", NULL, "Read attributes", "Write attributes", + "Write and verify(16)", "Verify(16)", +/* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)", + "Lock/unlock cache(16)", "Write same(16)", NULL, /* 95-99 */ NULL, NULL, NULL, NULL, NULL, -/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in (16)", - "Service action out (16)", -/* a0-a5 */ "Report luns", "Blank", "Send event", "Maintenance in", - "Maintenance out", "Move medium/play audio(12)", +/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)", + "Service action out(16)", +/* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank", + "Security protocol in", "Maintenance in", "Maintenance out", + "Move medium/play audio(12)", /* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)", "Play track relative(12)", /* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance", @@ -92,12 +94,12 @@ static const char * cdb_byte0_names[] = { /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)", /* b2-b4 */ "Search data low(12)", "Set limits(12)", "Read element status attached", -/* b5-b6 */ "Request volume element address", "Send volume tag, set streaming", +/* b5-b6 */ "Security protocol out", "Send volume tag, set streaming", /* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf", /* ba-bc */ "Redundancy group (in), Scan", - "Redundancy group (out), Set cd-rom speed", "Spare in, Play cd", -/* bd-bf */ "Spare out, Mechanism status", "Volume set in, Read cd", - "Volume set out, Send DVD structure", + "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd", +/* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd", + "Volume set (out), Send DVD structure", }; struct value_name_pair { @@ -112,6 +114,7 @@ static const struct value_name_pair maint_in_arr[] = { {0xc, "Report supported operation codes"}, {0xd, "Report supported task management functions"}, {0xe, "Report priority"}, + {0xf, "Report timestamp"}, }; #define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr) @@ -120,6 +123,7 @@ static const struct value_name_pair maint_out_arr[] = { {0xa, "Set target port groups"}, {0xb, "Change aliases"}, {0xe, "Set priority"}, + {0xe, "Set timestamp"}, }; #define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr) @@ -427,6 +431,7 @@ static struct error_info additional[] = {0x001A, "Rewind operation in progress"}, {0x001B, "Set capacity operation in progress"}, {0x001C, "Verify operation in progress"}, + {0x001D, "ATA pass through information available"}, {0x0100, "No index/sector signal"}, @@ -438,7 +443,7 @@ static struct error_info additional[] = {0x0400, "Logical unit not ready, cause not reportable"}, {0x0401, "Logical unit is in process of becoming ready"}, - {0x0402, "Logical unit not ready, initializing cmd. required"}, + {0x0402, "Logical unit not ready, initializing command required"}, {0x0403, "Logical unit not ready, manual intervention required"}, {0x0404, "Logical unit not ready, format in progress"}, {0x0405, "Logical unit not ready, rebuild in progress"}, @@ -478,6 +483,9 @@ static struct error_info additional[] = {0x0B00, "Warning"}, {0x0B01, "Warning - specified temperature exceeded"}, {0x0B02, "Warning - enclosure degraded"}, + {0x0B03, "Warning - background self-test failed"}, + {0x0B04, "Warning - background pre-scan detected medium error"}, + {0x0B05, "Warning - background medium scan detected medium error"}, {0x0C00, "Write error"}, {0x0C01, "Write error - recovered with auto reallocation"}, @@ -493,6 +501,7 @@ static struct error_info additional[] = {0x0C0B, "Auxiliary memory write error"}, {0x0C0C, "Write error - unexpected unsolicited data"}, {0x0C0D, "Write error - not enough unsolicited data"}, + {0x0C0F, "Defects in error window"}, {0x0D00, "Error detected by third party temporary initiator"}, {0x0D01, "Third party device failure"}, @@ -504,11 +513,12 @@ static struct error_info additional[] = {0x0E00, "Invalid information unit"}, {0x0E01, "Information unit too short"}, {0x0E02, "Information unit too long"}, + {0x0E03, "Invalid field in command information unit"}, {0x1000, "Id CRC or ECC error"}, - {0x1001, "Data block guard check failed"}, - {0x1002, "Data block application tag check failed"}, - {0x1003, "Data block reference tag check failed"}, + {0x1001, "Logical block guard check failed"}, + {0x1002, "Logical block application tag check failed"}, + {0x1003, "Logical block reference tag check failed"}, {0x1100, "Unrecovered read error"}, {0x1101, "Read retries exhausted"}, @@ -530,6 +540,7 @@ static struct error_info additional[] = {0x1111, "Read error - loss of streaming"}, {0x1112, "Auxiliary memory read error"}, {0x1113, "Read error - failed retransmission request"}, + {0x1114, "Read error - lba marked bad by application client"}, {0x1200, "Address mark not found for id field"}, @@ -610,11 +621,14 @@ static struct error_info additional[] = {0x2100, "Logical block address out of range"}, {0x2101, "Invalid element address"}, {0x2102, "Invalid address for write"}, + {0x2103, "Invalid write crossing layer jump"}, {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"}, {0x2400, "Invalid field in cdb"}, {0x2401, "CDB decryption error"}, + {0x2402, "Obsolete"}, + {0x2403, "Obsolete"}, {0x2404, "Security audit value frozen"}, {0x2405, "Security working key frozen"}, {0x2406, "Nonce not unique"}, @@ -637,7 +651,10 @@ static struct error_info additional[] = {0x260C, "Invalid operation for copy source or destination"}, {0x260D, "Copy segment granularity violation"}, {0x260E, "Invalid parameter while port is enabled"}, - {0x260F, "Invalid data-out buffer integrity"}, + {0x260F, "Invalid data-out buffer integrity check value"}, + {0x2610, "Data decryption key fail limit reached"}, + {0x2611, "Incomplete key-associated data set"}, + {0x2612, "Vendor specific key reference not found"}, {0x2700, "Write protected"}, {0x2701, "Hardware write protected"}, @@ -649,6 +666,7 @@ static struct error_info additional[] = {0x2800, "Not ready to ready change, medium may have changed"}, {0x2801, "Import or export element accessed"}, + {0x2802, "Format-layer may have changed"}, {0x2900, "Power on, reset, or bus device reset occurred"}, {0x2901, "Power on occurred"}, @@ -669,6 +687,11 @@ static struct error_info additional[] = {0x2A07, "Implicit asymmetric access state transition failed"}, {0x2A08, "Priority changed"}, {0x2A09, "Capacity data has changed"}, + {0x2A10, "Timestamp changed"}, + {0x2A11, "Data encryption parameters changed by another i_t nexus"}, + {0x2A12, "Data encryption parameters changed by vendor specific " + "event"}, + {0x2A13, "Data encryption key instance counter has changed"}, {0x2B00, "Copy cannot execute since host cannot disconnect"}, @@ -690,6 +713,7 @@ static struct error_info additional[] = {0x2E00, "Insufficient time for operation"}, {0x2F00, "Commands cleared by another initiator"}, + {0x2F01, "Commands cleared by power loss notification"}, {0x3000, "Incompatible medium installed"}, {0x3001, "Cannot read medium - unknown format"}, @@ -702,7 +726,8 @@ static struct error_info additional[] = {0x3008, "Cannot write - application code mismatch"}, {0x3009, "Current session not fixated for append"}, {0x300A, "Cleaning request rejected"}, - {0x300C, "WORM medium, overwrite attempted"}, + {0x300C, "WORM medium - overwrite attempted"}, + {0x300D, "WORM medium - integrity check"}, {0x3010, "Medium not formatted"}, {0x3100, "Medium format corrupted"}, @@ -790,6 +815,9 @@ static struct error_info additional[] = {0x3F0F, "Echo buffer overwritten"}, {0x3F10, "Medium loadable"}, {0x3F11, "Medium auxiliary memory accessible"}, + {0x3F12, "iSCSI IP address added"}, + {0x3F13, "iSCSI IP address removed"}, + {0x3F14, "iSCSI IP address changed"}, /* * {0x40NN, "Ram failure"}, * {0x40NN, "Diagnostic failure on component nn"}, @@ -799,6 +827,7 @@ static struct error_info additional[] = {0x4300, "Message error"}, {0x4400, "Internal target failure"}, + {0x4471, "ATA device failed set features"}, {0x4500, "Select or reselect failure"}, @@ -807,9 +836,10 @@ static struct error_info additional[] = {0x4700, "Scsi parity error"}, {0x4701, "Data phase CRC error detected"}, {0x4702, "Scsi parity error detected during st data phase"}, - {0x4703, "Information unit CRC error detected"}, + {0x4703, "Information unit iuCRC error detected"}, {0x4704, "Asynchronous information protection error detected"}, {0x4705, "Protocol service CRC error"}, + {0x4706, "Phy test function in progress"}, {0x477f, "Some commands cleared by iSCSI Protocol event"}, {0x4800, "Initiator detected error message received"}, @@ -844,6 +874,8 @@ static struct error_info additional[] = {0x5300, "Media load or eject failed"}, {0x5301, "Unload tape failure"}, {0x5302, "Medium removal prevented"}, + {0x5303, "Medium removal prevented by data transfer element"}, + {0x5304, "Medium thread or unthread failure"}, {0x5400, "Scsi to host system interface failure"}, @@ -855,6 +887,7 @@ static struct error_info additional[] = {0x5505, "Insufficient access control resources"}, {0x5506, "Auxiliary memory out of space"}, {0x5507, "Quota error"}, + {0x5508, "Maximum number of supplemental decryption keys exceeded"}, {0x5700, "Unable to recover table-of-contents"}, @@ -1004,6 +1037,7 @@ static struct error_info additional[] = {0x6708, "Assign failure occurred"}, {0x6709, "Multiply assigned logical unit"}, {0x670A, "Set target port groups command failed"}, + {0x670B, "ATA device feature not enabled"}, {0x6800, "Logical unit not configured"}, @@ -1030,6 +1064,8 @@ static struct error_info additional[] = {0x6F03, "Read of scrambled sector without authentication"}, {0x6F04, "Media region code is mismatched to logical unit region"}, {0x6F05, "Drive region must be permanent/region reset count error"}, + {0x6F06, "Insufficient block count for binding nonce recording"}, + {0x6F07, "Conflict in binding nonce recording"}, /* * {0x70NN, "Decompression exception short algorithm id of nn"}, */ @@ -1041,6 +1077,8 @@ static struct error_info additional[] = {0x7203, "Session fixation error - incomplete track in session"}, {0x7204, "Empty or partially written reserved track"}, {0x7205, "No more track reservations allowed"}, + {0x7206, "RMZ extension is not allowed"}, + {0x7207, "No more test zone extensions are allowed"}, {0x7300, "Cd control error"}, {0x7301, "Power calibration area almost full"}, @@ -1049,6 +1087,18 @@ static struct error_info additional[] = {0x7304, "Program memory area update failure"}, {0x7305, "Program memory area is full"}, {0x7306, "RMA/PMA is almost full"}, + {0x7310, "Current power calibration area almost full"}, + {0x7311, "Current power calibration area is full"}, + {0x7317, "RDZ is full"}, + + {0x7400, "Security error"}, + {0x7401, "Unable to decrypt data"}, + {0x7402, "Unencrypted data encountered while decrypting"}, + {0x7403, "Incorrect data encryption key"}, + {0x7404, "Cryptographic integrity validation failed"}, + {0x7405, "Error decrypting data"}, + {0x7471, "Logical unit access not authorized"}, + {0, NULL} }; -- cgit v1.2.3 From 5a0e326dfa6d87a1ac6929a7d6d327e8803b7aef Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:49:16 -0400 Subject: [SCSI] lpfc 8.1.7: Use mod_timer instead of add_timer in lpfc_els_timeout_handler Use mod_timer instead of add_timer in lpfc_els_timeout_handler This patch was formerly posted by Mark Haverkamp. http://marc.theaimsgroup.com/?l=linux-scsi&m=114246089015681&w=2 Signed-off-by: Mark Haverkamp Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_els.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 4126fd87956f..cac9e870838a 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -3282,10 +3282,9 @@ lpfc_els_timeout_handler(struct lpfc_hba *phba) } else lpfc_sli_release_iocbq(phba, piocb); } - if (phba->sli.ring[LPFC_ELS_RING].txcmplq_cnt) { - phba->els_tmofunc.expires = jiffies + HZ * timeout; - add_timer(&phba->els_tmofunc); - } + if (phba->sli.ring[LPFC_ELS_RING].txcmplq_cnt) + mod_timer(&phba->els_tmofunc, jiffies + HZ * timeout); + spin_unlock_irq(phba->host->host_lock); } -- cgit v1.2.3 From e17da18e2f78845899467d6e580146ef673f5330 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:49:25 -0400 Subject: [SCSI] lpfc 8.1.7: Standardize the driver on a single define for the maximum supported targets Standardize the driver on a single define for the maximum supported targets. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 9 +++++---- drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++-- drivers/scsi/lpfc/lpfc_scsi.c | 2 +- 3 files changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index f81691fcf177..d44f9aac6b8f 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -21,10 +21,12 @@ struct lpfc_sli2_slim; -#define LPFC_MAX_TARGET 256 /* max targets supported */ -#define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els req */ -#define LPFC_MAX_NS_RETRY 3 /* max NameServer retries */ +#define LPFC_MAX_TARGET 256 /* max number of targets supported */ +#define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els + requests */ +#define LPFC_MAX_NS_RETRY 3 /* Number of retry attempts to contact + the NameServer before giving up. */ #define LPFC_DFT_HBA_Q_DEPTH 2048 /* max cmds per hba */ #define LPFC_LC_HBA_Q_DEPTH 1024 /* max cmds per low cost hba */ #define LPFC_LP101_HBA_Q_DEPTH 128 /* max cmds per low cost hba */ @@ -41,7 +43,6 @@ struct lpfc_sli2_slim; (( (u64)(high)<<16 ) << 16)|( (u64)(low)))) /* Provide maximum configuration definitions. */ #define LPFC_DRVR_TIMEOUT 16 /* driver iocb timeout value in sec */ -#define MAX_FCP_TARGET 256 /* max num of FCP targets supported */ #define FC_MAX_ADPTMSG 64 #define MAX_HBAEVT 32 diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index adb086009ae0..4d6cf990c4fc 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1084,7 +1084,7 @@ lpfc_register_remote_port(struct lpfc_hba * phba, fc_remote_port_rolechg(rport, rport_ids.roles); if ((rport->scsi_target_id != -1) && - (rport->scsi_target_id < MAX_FCP_TARGET)) { + (rport->scsi_target_id < LPFC_MAX_TARGET)) { ndlp->nlp_sid = rport->scsi_target_id; } @@ -1313,7 +1313,7 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list) if ((rport_add == mapped) && ((!nlp->rport) || (nlp->rport->scsi_target_id == -1) || - (nlp->rport->scsi_target_id >= MAX_FCP_TARGET))) { + (nlp->rport->scsi_target_id >= LPFC_MAX_TARGET))) { nlp->nlp_state = NLP_STE_UNMAPPED_NODE; spin_lock_irq(phba->host->host_lock); nlp->nlp_flag |= NLP_TGT_NO_SCSIID; diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index aea1ee472f3d..578468810416 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1078,7 +1078,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) * targets known to the driver. Should any target reset * fail, this routine returns failure to the midlayer. */ - for (i = 0; i < MAX_FCP_TARGET; i++) { + for (i = 0; i < LPFC_MAX_TARGET; i++) { /* Search the mapped list for this target ID */ match = 0; list_for_each_entry(ndlp, &phba->fc_nlpmap_list, nlp_listp) { -- cgit v1.2.3 From 9f49d3b05f092b89e774be20c654ceb0c64a7d19 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:49:34 -0400 Subject: [SCSI] lpfc 8.1.7: Fix memory leak and cleanup code related to per ring lookup array Fix memory leak and cleanup code related to per ring lookup array. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_mem.c | 5 +++++ drivers/scsi/lpfc/lpfc_sli.c | 25 ------------------------- drivers/scsi/lpfc/lpfc_sli.h | 2 -- 3 files changed, 5 insertions(+), 27 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index 07017658ac56..066292d3995a 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -133,6 +133,11 @@ lpfc_mem_free(struct lpfc_hba * phba) pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool); pci_pool_destroy(phba->lpfc_mbuf_pool); + + /* Free the iocb lookup array */ + kfree(psli->iocbq_lookup); + psli->iocbq_lookup = NULL; + } void * diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index bb69a7a1ec59..8193a384a9fb 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -191,35 +191,12 @@ static int lpfc_sli_ringtxcmpl_put(struct lpfc_hba * phba, struct lpfc_sli_ring * pring, struct lpfc_iocbq * piocb) { - uint16_t iotag; - list_add_tail(&piocb->list, &pring->txcmplq); pring->txcmplq_cnt++; if (unlikely(pring->ringno == LPFC_ELS_RING)) mod_timer(&phba->els_tmofunc, jiffies + HZ * (phba->fc_ratov << 1)); - if (pring->fast_lookup) { - /* Setup fast lookup based on iotag for completion */ - iotag = piocb->iocb.ulpIoTag; - if (iotag && (iotag < pring->fast_iotag)) - *(pring->fast_lookup + iotag) = piocb; - else { - - /* Cmd ring put: iotag greater then - configured max wd0 */ - lpfc_printf_log(phba, - KERN_ERR, - LOG_SLI, - "%d:0316 Cmd ring %d put: iotag x%x " - "greater then configured max x%x " - "wd0 x%x\n", - phba->brd_no, - pring->ringno, iotag, - pring->fast_iotag, - *(((uint32_t *)(&piocb->iocb)) + 7)); - } - } return (0); } @@ -2659,8 +2636,6 @@ lpfc_sli_hba_down(struct lpfc_hba * phba) INIT_LIST_HEAD(&(pring->txq)); - kfree(pring->fast_lookup); - pring->fast_lookup = NULL; } spin_unlock_irqrestore(phba->host->host_lock, flags); diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index a52d6c6cf083..d8ef0d2894d4 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -135,8 +135,6 @@ struct lpfc_sli_ring { uint32_t fast_iotag; /* max fastlookup based iotag */ uint32_t iotag_ctr; /* keeps track of the next iotag to use */ uint32_t iotag_max; /* max iotag value to use */ - struct lpfc_iocbq ** fast_lookup; /* array of IOCB ptrs indexed by - iotag */ struct list_head txq; uint16_t txq_cnt; /* current length of queue */ uint16_t txq_max; /* max length */ -- cgit v1.2.3 From d0e56dad5c10e2a34a830e02dfd3aca20e63e387 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:49:42 -0400 Subject: [SCSI] lpfc 8.1.7: Fixed infinite retry of REG_LOGIN mailbox failed due to MBXERR_RPI_FULL Fixed infinite retry of REG_LOGIN mailbox failed due to MBXERR_RPI_FULL Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_nportdisc.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 27d60ad897cd..bd0b0e293d63 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -1110,6 +1110,17 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_hba * phba, phba->brd_no, did, mb->mbxStatus, phba->hba_state); + /* + * If RegLogin failed due to lack of HBA resources do not + * retry discovery. + */ + if (mb->mbxStatus == MBXERR_RPI_FULL) { + ndlp->nlp_prev_state = NLP_STE_UNUSED_NODE; + ndlp->nlp_state = NLP_STE_UNUSED_NODE; + lpfc_nlp_list(phba, ndlp, NLP_UNUSED_LIST); + return ndlp->nlp_state; + } + /* Put ndlp in npr list set plogi timer for 1 sec */ mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1); spin_lock_irq(phba->host->host_lock); -- cgit v1.2.3 From 4db621e0f3817e14c79513b42c0479d44d8467de Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:49:49 -0400 Subject: [SCSI] lpfc 8.1.7: Issue DOWN_LINK prior to INIT_LINK to work around link failure issue Issue DOWN_LINK prior to INIT_LINK to work around link failure issue Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index b62a72dfab29..511de17a1f83 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -219,9 +219,19 @@ lpfc_issue_lip(struct Scsi_Host *host) return -ENOMEM; memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t)); - lpfc_init_link(phba, pmboxq, phba->cfg_topology, phba->cfg_link_speed); + pmboxq->mb.mbxCommand = MBX_DOWN_LINK; + pmboxq->mb.mbxOwner = OWN_HOST; + mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); + if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) { + memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t)); + lpfc_init_link(phba, pmboxq, phba->cfg_topology, + phba->cfg_link_speed); + mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, + phba->fc_ratov * 2); + } + if (mbxstatus == MBX_TIMEOUT) pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl; else -- cgit v1.2.3 From 688a88635f9d0d9251d35198e931eaac8816abef Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:49:56 -0400 Subject: [SCSI] lpfc 8.1.7: Fix txcmplq related panics on heavy IO while downloading firmware Fix txcmplq related panics on heavy IO while downloading firmware Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_init.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 81755a3f7c68..2944eda1e907 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1339,7 +1339,8 @@ lpfc_offline(struct lpfc_hba * phba) struct lpfc_sli_ring *pring; struct lpfc_sli *psli; unsigned long iflag; - int i = 0; + int i; + int cnt = 0; if (!phba) return 0; @@ -1348,17 +1349,26 @@ lpfc_offline(struct lpfc_hba * phba) return 0; psli = &phba->sli; - pring = &psli->ring[psli->fcp_ring]; lpfc_linkdown(phba); - /* The linkdown event takes 30 seconds to timeout. */ - while (pring->txcmplq_cnt) { - mdelay(10); - if (i++ > 3000) - break; + for (i = 0; i < psli->num_rings; i++) { + pring = &psli->ring[i]; + /* The linkdown event takes 30 seconds to timeout. */ + while (pring->txcmplq_cnt) { + mdelay(10); + if (cnt++ > 3000) { + lpfc_printf_log(phba, + KERN_WARNING, LOG_INIT, + "%d:0466 Outstanding IO when " + "bringing Adapter offline\n", + phba->brd_no); + break; + } + } } + /* stop all timers associated with this hba */ lpfc_stop_timer(phba); phba->work_hba_events = 0; -- cgit v1.2.3 From 9279565046f39f3ab338818c9923a23b9f25be5f Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:50:02 -0400 Subject: [SCSI] lpfc 8.1.7: Correct bogus nodev_tmo message on NPort that changes its NPort Id Correct bogus nodev_tmo message on NPort that changes its NPort Id Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_els.c | 58 ++++++++++++++++++++++++++------------------ 1 file changed, 34 insertions(+), 24 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index cac9e870838a..b89f6cb641e6 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -648,33 +648,32 @@ lpfc_more_plogi(struct lpfc_hba * phba) } static struct lpfc_nodelist * -lpfc_plogi_confirm_nport(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, +lpfc_plogi_confirm_nport(struct lpfc_hba * phba, struct lpfc_dmabuf *prsp, struct lpfc_nodelist *ndlp) { struct lpfc_nodelist *new_ndlp; - struct lpfc_dmabuf *pcmd, *prsp; uint32_t *lp; struct serv_parm *sp; uint8_t name[sizeof (struct lpfc_name)]; uint32_t rc; - pcmd = (struct lpfc_dmabuf *) cmdiocb->context2; - prsp = (struct lpfc_dmabuf *) pcmd->list.next; lp = (uint32_t *) prsp->virt; sp = (struct serv_parm *) ((uint8_t *) lp + sizeof (uint32_t)); + memset(name, 0, sizeof (struct lpfc_name)); /* Now we to find out if the NPort we are logging into, matches the WWPN * we have for that ndlp. If not, we have some work to do. */ new_ndlp = lpfc_findnode_wwpn(phba, NLP_SEARCH_ALL, &sp->portName); - memset(name, 0, sizeof (struct lpfc_name)); - rc = memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)); - if (!rc || (new_ndlp == ndlp)) { + if (new_ndlp == ndlp) return ndlp; - } if (!new_ndlp) { + rc = + memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)); + if (!rc) + return ndlp; new_ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_ATOMIC); if (!new_ndlp) return ndlp; @@ -683,17 +682,21 @@ lpfc_plogi_confirm_nport(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, } lpfc_unreg_rpi(phba, new_ndlp); - new_ndlp->nlp_prev_state = ndlp->nlp_state; new_ndlp->nlp_DID = ndlp->nlp_DID; - new_ndlp->nlp_state = NLP_STE_PLOGI_ISSUE; - lpfc_nlp_list(phba, new_ndlp, NLP_PLOGI_LIST); + new_ndlp->nlp_prev_state = ndlp->nlp_prev_state; + new_ndlp->nlp_state = ndlp->nlp_state; + lpfc_nlp_list(phba, new_ndlp, ndlp->nlp_flag & NLP_LIST_MASK); /* Move this back to NPR list */ - lpfc_unreg_rpi(phba, ndlp); - ndlp->nlp_DID = 0; /* Two ndlps cannot have the same did */ - ndlp->nlp_state = NLP_STE_NPR_NODE; - lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST); - + if (memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)) == 0) { + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); + } + else { + lpfc_unreg_rpi(phba, ndlp); + ndlp->nlp_DID = 0; /* Two ndlps cannot have the same did */ + ndlp->nlp_state = NLP_STE_NPR_NODE; + lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST); + } return new_ndlp; } @@ -703,6 +706,7 @@ lpfc_cmpl_els_plogi(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, { IOCB_t *irsp; struct lpfc_nodelist *ndlp; + struct lpfc_dmabuf *prsp; int disc, rc, did, type; @@ -769,7 +773,10 @@ lpfc_cmpl_els_plogi(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, } } else { /* Good status, call state machine */ - ndlp = lpfc_plogi_confirm_nport(phba, cmdiocb, ndlp); + prsp = list_entry(((struct lpfc_dmabuf *) + cmdiocb->context2)->list.next, + struct lpfc_dmabuf, list); + ndlp = lpfc_plogi_confirm_nport(phba, prsp, ndlp); rc = lpfc_disc_state_machine(phba, ndlp, cmdiocb, NLP_EVT_CMPL_PLOGI); } @@ -3441,6 +3448,8 @@ lpfc_els_unsol_event(struct lpfc_hba * phba, if ((did & Fabric_DID_MASK) == Fabric_DID_MASK) { ndlp->nlp_type |= NLP_FABRIC; } + ndlp->nlp_state = NLP_STE_UNUSED_NODE; + lpfc_nlp_list(phba, ndlp, NLP_UNUSED_LIST); } phba->fc_stat.elsRcvFrame++; @@ -3462,13 +3471,14 @@ lpfc_els_unsol_event(struct lpfc_hba * phba, rjt_err = 1; break; } + ndlp = lpfc_plogi_confirm_nport(phba, mp, ndlp); lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_PLOGI); break; case ELS_CMD_FLOGI: phba->fc_stat.elsRcvFLOGI++; lpfc_els_rcv_flogi(phba, elsiocb, ndlp, newnode); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; case ELS_CMD_LOGO: @@ -3491,7 +3501,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba, phba->fc_stat.elsRcvRSCN++; lpfc_els_rcv_rscn(phba, elsiocb, ndlp, newnode); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; case ELS_CMD_ADISC: @@ -3534,28 +3544,28 @@ lpfc_els_unsol_event(struct lpfc_hba * phba, phba->fc_stat.elsRcvLIRR++; lpfc_els_rcv_lirr(phba, elsiocb, ndlp); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; case ELS_CMD_RPS: phba->fc_stat.elsRcvRPS++; lpfc_els_rcv_rps(phba, elsiocb, ndlp); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; case ELS_CMD_RPL: phba->fc_stat.elsRcvRPL++; lpfc_els_rcv_rpl(phba, elsiocb, ndlp); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; case ELS_CMD_RNID: phba->fc_stat.elsRcvRNID++; lpfc_els_rcv_rnid(phba, elsiocb, ndlp); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; default: @@ -3567,7 +3577,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba, "%d:0115 Unknown ELS command x%x received from " "NPORT x%x\n", phba->brd_no, cmd, did); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; } -- cgit v1.2.3 From bcf4dbfaf38502d3919e0601c06afac7d5e42685 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:50:08 -0400 Subject: [SCSI] lpfc 8.1.7: Consolidate dma buf cleanup into a separate function Consolidate dma buf cleanup into a separate function Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_scsi.c | 40 ++++++++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 16 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 578468810416..d45616e70c67 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -153,22 +153,6 @@ static void lpfc_release_scsi_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb) { unsigned long iflag = 0; - /* - * There are only two special cases to consider. (1) the scsi command - * requested scatter-gather usage or (2) the scsi command allocated - * a request buffer, but did not request use_sg. There is a third - * case, but it does not require resource deallocation. - */ - if ((psb->seg_cnt > 0) && (psb->pCmd->use_sg)) { - dma_unmap_sg(&phba->pcidev->dev, psb->pCmd->request_buffer, - psb->seg_cnt, psb->pCmd->sc_data_direction); - } else { - if ((psb->nonsg_phys) && (psb->pCmd->request_bufflen)) { - dma_unmap_single(&phba->pcidev->dev, psb->nonsg_phys, - psb->pCmd->request_bufflen, - psb->pCmd->sc_data_direction); - } - } spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); psb->pCmd = NULL; @@ -281,6 +265,27 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * lpfc_cmd) return 0; } +static void +lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb) +{ + /* + * There are only two special cases to consider. (1) the scsi command + * requested scatter-gather usage or (2) the scsi command allocated + * a request buffer, but did not request use_sg. There is a third + * case, but it does not require resource deallocation. + */ + if ((psb->seg_cnt > 0) && (psb->pCmd->use_sg)) { + dma_unmap_sg(&phba->pcidev->dev, psb->pCmd->request_buffer, + psb->seg_cnt, psb->pCmd->sc_data_direction); + } else { + if ((psb->nonsg_phys) && (psb->pCmd->request_bufflen)) { + dma_unmap_single(&phba->pcidev->dev, psb->nonsg_phys, + psb->pCmd->request_bufflen, + psb->pCmd->sc_data_direction); + } + } +} + static void lpfc_handle_fcp_err(struct lpfc_scsi_buf *lpfc_cmd) { @@ -454,6 +459,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, cmd->scsi_done(cmd); if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { + lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); lpfc_release_scsi_buf(phba, lpfc_cmd); return; } @@ -511,6 +517,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, } } + lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); lpfc_release_scsi_buf(phba, lpfc_cmd); } @@ -822,6 +829,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) return 0; out_host_busy_free_buf: + lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); lpfc_release_scsi_buf(phba, lpfc_cmd); out_host_busy: return SCSI_MLQUEUE_HOST_BUSY; -- cgit v1.2.3 From 420b630d6e9ff41dc3e2a2a2808b67907951e094 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:50:16 -0400 Subject: [SCSI] lpfc 8.1.7: Fix panic in lpfc_sli_validate_fcp_iocb Fix panic in lpfc_sli_validate_fcp_iocb due to access of scsi_cmnd after returning it to the midlayer Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_scsi.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index d45616e70c67..a760a44173df 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -616,6 +616,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_hba * phba, struct lpfc_scsi_buf * lpfc_cmd, static int lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, + unsigned int lun, uint8_t task_mgmt_cmd) { struct lpfc_sli *psli; @@ -634,8 +635,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba, piocb = &piocbq->iocb; fcp_cmnd = lpfc_cmd->fcp_cmnd; - int_to_scsilun(lpfc_cmd->pCmd->device->lun, - &lpfc_cmd->fcp_cmnd->fcp_lun); + int_to_scsilun(lun, &lpfc_cmd->fcp_cmnd->fcp_lun); fcp_cmnd->fcpCntl2 = task_mgmt_cmd; piocb->ulpCommand = CMD_FCP_ICMND64_CR; @@ -662,14 +662,16 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba, static int lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba, - unsigned tgt_id, struct lpfc_rport_data *rdata) + unsigned tgt_id, unsigned int lun, + struct lpfc_rport_data *rdata) { struct lpfc_iocbq *iocbq; struct lpfc_iocbq *iocbqrsp; int ret; lpfc_cmd->rdata = rdata; - ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_TARGET_RESET); + ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, lun, + FCP_TARGET_RESET); if (!ret) return FAILED; @@ -977,12 +979,12 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) if (lpfc_cmd == NULL) goto out; - lpfc_cmd->pCmd = cmnd; lpfc_cmd->timeout = 60; lpfc_cmd->scsi_hba = phba; lpfc_cmd->rdata = rdata; - ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_LUN_RESET); + ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, cmnd->device->lun, + FCP_LUN_RESET); if (!ret) goto out_free_scsi_buf; @@ -1009,7 +1011,6 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) cmd_status = iocbqrsp->iocb.ulpStatus; lpfc_sli_release_iocbq(phba, iocbqrsp); - lpfc_release_scsi_buf(phba, lpfc_cmd); /* * All outstanding txcmplq I/Os should have been aborted by the device. @@ -1048,6 +1049,8 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) } out_free_scsi_buf: + lpfc_release_scsi_buf(phba, lpfc_cmd); + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, "%d:0713 SCSI layer issued LUN reset (%d, %d) " "Data: x%x x%x x%x\n", @@ -1078,7 +1081,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) /* The lpfc_cmd storage is reused. Set all loop invariants. */ lpfc_cmd->timeout = 60; - lpfc_cmd->pCmd = cmnd; lpfc_cmd->scsi_hba = phba; /* @@ -1098,8 +1100,8 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) if (!match) continue; - ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba, - i, ndlp->rport->dd_data); + ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba, i, cmnd->device->lun, + ndlp->rport->dd_data); if (ret != SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_FCP, "%d:0713 Bus Reset on target %d failed\n", -- cgit v1.2.3 From 40496f073ffe75c59414a7236f95ecbc49562596 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:50:22 -0400 Subject: [SCSI] lpfc 8.1.7: Adding new issue_reset sysfs attribute Adding new issue_reset sysfs attribute Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 511de17a1f83..cdae011b2813 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -243,6 +243,47 @@ lpfc_issue_lip(struct Scsi_Host *host) return 0; } +static int +lpfc_selective_reset(struct lpfc_hba *phba) +{ + struct completion online_compl; + int status = 0; + + init_completion(&online_compl); + lpfc_workq_post_event(phba, &status, &online_compl, + LPFC_EVT_OFFLINE); + wait_for_completion(&online_compl); + + if (status != 0) + return -EIO; + + init_completion(&online_compl); + lpfc_workq_post_event(phba, &status, &online_compl, + LPFC_EVT_ONLINE); + wait_for_completion(&online_compl); + + if (status != 0) + return -EIO; + + return 0; +} + +static ssize_t +lpfc_issue_reset(struct class_device *cdev, const char *buf, size_t count) +{ + struct Scsi_Host *host = class_to_shost(cdev); + struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata; + int status = -EINVAL; + + if (strncmp(buf, "selective", sizeof("selective") - 1) == 0) + status = lpfc_selective_reset(phba); + + if (status == 0) + return strlen(buf); + else + return status; +} + static ssize_t lpfc_nport_evt_cnt_show(struct class_device *cdev, char *buf) { @@ -546,6 +587,7 @@ static CLASS_DEVICE_ATTR(board_online, S_IRUGO | S_IWUSR, lpfc_board_online_show, lpfc_board_online_store); static CLASS_DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR, lpfc_board_mode_show, lpfc_board_mode_store); +static CLASS_DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset); static int lpfc_poll = 0; module_param(lpfc_poll, int, 0); @@ -751,6 +793,7 @@ struct class_device_attribute *lpfc_host_attrs[] = { &class_device_attr_management_version, &class_device_attr_board_online, &class_device_attr_board_mode, + &class_device_attr_issue_reset, &class_device_attr_lpfc_poll, &class_device_attr_lpfc_poll_tmo, NULL, -- cgit v1.2.3 From 5e0b43385559bfe78c1f80d71ec203effe244d9a Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:50:29 -0400 Subject: [SCSI] lpfc 8.1.7: Remove depricated sysfs attribute board_online Remove depricated sysfs attribute board_online, as it's replaced by the new issue_reset attribute Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 42 ------------------------------------------ 1 file changed, 42 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index cdae011b2813..48379c606124 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -292,45 +292,6 @@ lpfc_nport_evt_cnt_show(struct class_device *cdev, char *buf) return snprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt); } -static ssize_t -lpfc_board_online_show(struct class_device *cdev, char *buf) -{ - struct Scsi_Host *host = class_to_shost(cdev); - struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata; - - if (phba->fc_flag & FC_OFFLINE_MODE) - return snprintf(buf, PAGE_SIZE, "0\n"); - else - return snprintf(buf, PAGE_SIZE, "1\n"); -} - -static ssize_t -lpfc_board_online_store(struct class_device *cdev, const char *buf, - size_t count) -{ - struct Scsi_Host *host = class_to_shost(cdev); - struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata; - struct completion online_compl; - int val=0, status=0; - - if (sscanf(buf, "%d", &val) != 1) - return -EINVAL; - - init_completion(&online_compl); - - if (val) - lpfc_workq_post_event(phba, &status, &online_compl, - LPFC_EVT_ONLINE); - else - lpfc_workq_post_event(phba, &status, &online_compl, - LPFC_EVT_OFFLINE); - wait_for_completion(&online_compl); - if (!status) - return strlen(buf); - else - return -EIO; -} - static ssize_t lpfc_board_mode_show(struct class_device *cdev, char *buf) { @@ -583,8 +544,6 @@ static CLASS_DEVICE_ATTR(lpfc_drvr_version, S_IRUGO, lpfc_drvr_version_show, NULL); static CLASS_DEVICE_ATTR(management_version, S_IRUGO, management_version_show, NULL); -static CLASS_DEVICE_ATTR(board_online, S_IRUGO | S_IWUSR, - lpfc_board_online_show, lpfc_board_online_store); static CLASS_DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR, lpfc_board_mode_show, lpfc_board_mode_store); static CLASS_DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset); @@ -791,7 +750,6 @@ struct class_device_attribute *lpfc_host_attrs[] = { &class_device_attr_lpfc_max_luns, &class_device_attr_nport_evt_cnt, &class_device_attr_management_version, - &class_device_attr_board_online, &class_device_attr_board_mode, &class_device_attr_issue_reset, &class_device_attr_lpfc_poll, -- cgit v1.2.3 From ce8b3ce55bb0bd9318954efab0f714b088178978 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:50:36 -0400 Subject: [SCSI] lpfc 8.1.7: Correct the wait in attachment that delays for topology discovery Correct the wait in attachment that delays for topology discovery Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_init.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 2944eda1e907..2a81df054022 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -405,19 +405,26 @@ lpfc_config_port_post(struct lpfc_hba * phba) } /* MBOX buffer will be freed in mbox compl */ - i = 0; + return (0); +} + +static int +lpfc_discovery_wait(struct lpfc_hba *phba) +{ + int i = 0; + while ((phba->hba_state != LPFC_HBA_READY) || (phba->num_disc_nodes) || (phba->fc_prli_sent) || ((phba->fc_map_cnt == 0) && (i<2)) || - (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE)) { + (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE)) { /* Check every second for 30 retries. */ i++; if (i > 30) { - break; + return -ETIMEDOUT; } if ((i >= 15) && (phba->hba_state <= LPFC_LINK_DOWN)) { /* The link is down. Set linkdown timeout */ - break; + return -ETIMEDOUT; } /* Delay for 1 second to give discovery time to complete. */ @@ -425,12 +432,7 @@ lpfc_config_port_post(struct lpfc_hba * phba) } - /* Since num_disc_nodes keys off of PLOGI, delay a bit to let - * any potential PRLIs to flush thru the SLI sub-system. - */ - msleep(50); - - return (0); + return 0; } /************************************************************************/ @@ -1649,6 +1651,8 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) goto out_free_irq; } + lpfc_discovery_wait(phba); + if (phba->cfg_poll & DISABLE_FCP_RING_INT) { spin_lock_irq(phba->host->host_lock); lpfc_poll_start_timer(phba); -- cgit v1.2.3 From b4c026520ff0a4cb838a941bb0ed8996075e3d8c Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:50:43 -0400 Subject: [SCSI] lpfc 8.1.7: Add lpfc_sli_flush_mbox_queue() function Add lpfc_sli_flush_mbox_queue() function and use it in lpfc_offline() call to avoid deadlock on thread block. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_crtn.h | 1 + drivers/scsi/lpfc/lpfc_init.c | 1 + drivers/scsi/lpfc/lpfc_sli.c | 20 +++++++++++++++++++- 3 files changed, 21 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index ee22173fce43..517e9e4dd461 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -147,6 +147,7 @@ int lpfc_sli_hba_setup(struct lpfc_hba *); int lpfc_sli_hba_down(struct lpfc_hba *); int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); int lpfc_sli_handle_mb_event(struct lpfc_hba *); +int lpfc_sli_flush_mbox_queue(struct lpfc_hba *); int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *, struct lpfc_sli_ring *, uint32_t); void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 2a81df054022..ee591c107e1c 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1353,6 +1353,7 @@ lpfc_offline(struct lpfc_hba * phba) psli = &phba->sli; lpfc_linkdown(phba); + lpfc_sli_flush_mbox_queue(phba); for (i = 0; i < psli->num_rings; i++) { pring = &psli->ring[i]; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 8193a384a9fb..c441e37eb053 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -578,7 +578,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba * phba) /* Stray Mailbox Interrupt, mbxCommand mbxStatus */ lpfc_printf_log(phba, - KERN_ERR, + KERN_WARNING, LOG_MBOX | LOG_SLI, "%d:0304 Stray Mailbox Interrupt " "mbxCommand x%x mbxStatus x%x\n", @@ -3085,6 +3085,24 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq, return retval; } +int +lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba) +{ + int i = 0; + + while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE && !phba->stopped) { + if (i++ > LPFC_MBOX_TMO * 1000) + return 1; + + if (lpfc_sli_handle_mb_event(phba) == 0) + i = 0; + + msleep(1); + } + + return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0; +} + irqreturn_t lpfc_intr_handler(int irq, void *dev_id, struct pt_regs * regs) { -- cgit v1.2.3 From 65a29c166fe331574880a375559405ac802b027a Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:50:50 -0400 Subject: [SCSI] lpfc 8.1.7: Misc Fixes Misc Fixes: - Fix some sparse warnings - casts of address space - Fix handling of the adapter registration string. Each invocation was byteswapping, so every other adapter init attempt failed. - Correct comments and default value for the lpfc_max_luns parameter Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 10 +++++----- drivers/scsi/lpfc/lpfc_init.c | 10 +++++++--- drivers/scsi/lpfc/lpfc_sli.c | 10 +++++----- 3 files changed, 17 insertions(+), 13 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 48379c606124..5c68cdd8736f 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -706,12 +706,12 @@ LPFC_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands " "during discovery"); /* -# lpfc_max_luns: maximum number of LUNs per target driver will support -# Value range is [1,32768]. Default value is 256. -# NOTE: The SCSI layer will scan each target for this many luns +# lpfc_max_luns: maximum allowed LUN. +# Value range is [0,65535]. Default value is 255. +# NOTE: The SCSI layer might probe all allowed LUN on some old targets. */ -LPFC_ATTR_R(max_luns, 256, 1, 32768, - "Maximum number of LUNs per target driver will support"); +LPFC_ATTR_R(max_luns, 255, 0, 65535, + "Maximum allowed LUN"); /* # lpfc_poll_tmo: .Milliseconds driver will wait between polling FCP ring. diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index ee591c107e1c..ef47b824cbed 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -71,6 +71,7 @@ lpfc_config_port_prep(struct lpfc_hba * phba) uint16_t offset = 0; static char licensed[56] = "key unlock for use with gnu public licensed code only\0"; + static int init_key = 1; pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmb) { @@ -82,10 +83,13 @@ lpfc_config_port_prep(struct lpfc_hba * phba) phba->hba_state = LPFC_INIT_MBX_CMDS; if (lpfc_is_LC_HBA(phba->pcidev->device)) { - uint32_t *ptext = (uint32_t *) licensed; + if (init_key) { + uint32_t *ptext = (uint32_t *) licensed; - for (i = 0; i < 56; i += sizeof (uint32_t), ptext++) - *ptext = cpu_to_be32(*ptext); + for (i = 0; i < 56; i += sizeof (uint32_t), ptext++) + *ptext = cpu_to_be32(*ptext); + init_key = 0; + } lpfc_read_nv(phba, pmb); memset((char*)mb->un.varRDnvp.rsvd3, 0, diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index c441e37eb053..350a625fa224 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1547,8 +1547,8 @@ lpfc_sli_brdready(struct lpfc_hba * phba, uint32_t mask) void lpfc_reset_barrier(struct lpfc_hba * phba) { - uint32_t * resp_buf; - uint32_t * mbox_buf; + uint32_t __iomem *resp_buf; + uint32_t __iomem *mbox_buf; volatile uint32_t mbox; uint32_t hc_copy; int i; @@ -1564,7 +1564,7 @@ void lpfc_reset_barrier(struct lpfc_hba * phba) * Tell the other part of the chip to suspend temporarily all * its DMA activity. */ - resp_buf = (uint32_t *)phba->MBslimaddr; + resp_buf = phba->MBslimaddr; /* Disable the error attention */ hc_copy = readl(phba->HCregaddr); @@ -1582,7 +1582,7 @@ void lpfc_reset_barrier(struct lpfc_hba * phba) ((MAILBOX_t *)&mbox)->mbxOwner = OWN_CHIP; writel(BARRIER_TEST_PATTERN, (resp_buf + 1)); - mbox_buf = (uint32_t *)phba->MBslimaddr; + mbox_buf = phba->MBslimaddr; writel(mbox, mbox_buf); for (i = 0; @@ -1782,7 +1782,7 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba) skip_post = 0; word0 = 0; /* This is really setting up word1 */ } - to_slim = (uint8_t *) phba->MBslimaddr + sizeof (uint32_t); + to_slim = phba->MBslimaddr + sizeof (uint32_t); writel(*(uint32_t *) mb, to_slim); readl(to_slim); /* flush */ -- cgit v1.2.3 From 035bff20bff2b6779ed3ad0a24a51a1a96828bc8 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 6 Jul 2006 15:50:58 -0400 Subject: [SCSI] lpfc 8.1.7: Change version number to 8.1.7 Change version number to 8.1.7 Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 6b737568b831..10e89c6ae823 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.1.6" +#define LPFC_DRIVER_VERSION "8.1.7" #define LPFC_DRIVER_NAME "lpfc" -- cgit v1.2.3 From 4e73ea7b02a8d2759b20ab52f13f40d5f5421044 Mon Sep 17 00:00:00 2001 From: Luben Tuikov Date: Fri, 7 Jul 2006 00:02:18 -0700 Subject: [SCSI] st.c: Improve sense output Convert this: st0: Error with sense data: <6>st: Current: sense key: Illegal Request Additional sense: Invalid field in cdb To this: st0: Current: sense key: Illegal Request Additional sense: Invalid field in cdb Signed-off-by: Luben Tuikov Acked-by: Kai Makisara Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/st.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 756ceb93ddc8..7f669b600677 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -368,7 +368,7 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt) SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2], SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]); if (cmdstatp->have_sense) - __scsi_print_sense("st", SRpnt->sense, SCSI_SENSE_BUFFERSIZE); + __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE); } ) /* end DEB */ if (!debugging) { /* Abnormal conditions for tape */ if (!cmdstatp->have_sense) @@ -384,9 +384,8 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt) scode != VOLUME_OVERFLOW && SRpnt->cmd[0] != MODE_SENSE && SRpnt->cmd[0] != TEST_UNIT_READY) { - printk(KERN_WARNING "%s: Error with sense data: ", name); - __scsi_print_sense("st", SRpnt->sense, - SCSI_SENSE_BUFFERSIZE); + + __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE); } } -- cgit v1.2.3 From 5e13cdfa5ba94724d6ab11de26b3ec3c94b88b00 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 8 Jul 2006 20:39:30 +0200 Subject: [SCSI] aha152x: stop poking at saved scsi_cmnd members Stop poking into the old_ & co scsi_cmnd fields that should only be used in the EH code. Untested, but this is required to move ahead with the EH fixes. Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley --- drivers/scsi/aha152x.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index 36e63f82d9f8..cff3d389b010 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -551,6 +551,11 @@ struct aha152x_hostdata { struct aha152x_scdata { Scsi_Cmnd *next; /* next sc in queue */ struct semaphore *sem; /* semaphore to block on */ + unsigned char cmd_len; + unsigned char cmnd[MAX_COMMAND_SIZE]; + unsigned short use_sg; + unsigned request_bufflen; + void *request_buffer; }; @@ -1006,11 +1011,20 @@ static int aha152x_internal_queue(Scsi_Cmnd *SCpnt, struct semaphore *sem, int p return FAILED; } } else { + struct aha152x_scdata *sc; + SCpnt->host_scribble = kmalloc(sizeof(struct aha152x_scdata), GFP_ATOMIC); if(SCpnt->host_scribble==0) { printk(ERR_LEAD "allocation failed\n", CMDINFO(SCpnt)); return FAILED; } + + sc = SCDATA(SCpnt); + memcpy(sc->cmnd, SCpnt->cmnd, sizeof(sc->cmnd)); + sc->request_buffer = SCpnt->request_buffer; + sc->request_bufflen = SCpnt->request_bufflen; + sc->use_sg = SCpnt->use_sg; + sc->cmd_len = SCpnt->cmd_len; } SCNEXT(SCpnt) = NULL; @@ -1565,6 +1579,9 @@ static void busfree_run(struct Scsi_Host *shpnt) #endif if(DONE_SC->SCp.phase & check_condition) { + struct scsi_cmnd *cmd = HOSTDATA(shpnt)->done_SC; + struct aha152x_scdata *sc = SCDATA(cmd); + #if 0 if(HOSTDATA(shpnt)->debug & debug_eh) { printk(ERR_LEAD "received sense: ", CMDINFO(DONE_SC)); @@ -1573,13 +1590,13 @@ static void busfree_run(struct Scsi_Host *shpnt) #endif /* restore old command */ - memcpy((void *) DONE_SC->cmnd, (void *) DONE_SC->data_cmnd, sizeof(DONE_SC->data_cmnd)); - DONE_SC->request_buffer = DONE_SC->buffer; - DONE_SC->request_bufflen = DONE_SC->bufflen; - DONE_SC->use_sg = DONE_SC->old_use_sg; - DONE_SC->cmd_len = DONE_SC->old_cmd_len; + memcpy(cmd->cmnd, sc->cmnd, sizeof(sc->cmnd)); + cmd->request_buffer = sc->request_buffer; + cmd->request_bufflen = sc->request_bufflen; + cmd->use_sg = sc->use_sg; + cmd->cmd_len = sc->cmd_len; - DONE_SC->SCp.Status = 0x02; + cmd->SCp.Status = 0x02; HOSTDATA(shpnt)->commands--; if (!HOSTDATA(shpnt)->commands) -- cgit v1.2.3 From d14164316d48a4319d8da9dc24be8663b2472bae Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sat, 8 Jul 2006 14:02:26 -0600 Subject: [SCSI] aic7[9x]xx: Remove last vestiges of reverse_scan Remove last vestiges of the reverse_scan paramater from aic7xxx and aic79xx. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/aic7xxx/aic79xx_osm.c | 21 --------------------- drivers/scsi/aic7xxx/aic7xxx_osm.c | 1 - 2 files changed, 22 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index b244c7124179..998999c0a972 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -242,25 +242,6 @@ ahd_print_path(struct ahd_softc *ahd, struct scb *scb) */ static uint32_t aic79xx_no_reset; -/* - * Certain PCI motherboards will scan PCI devices from highest to lowest, - * others scan from lowest to highest, and they tend to do all kinds of - * strange things when they come into contact with PCI bridge chips. The - * net result of all this is that the PCI card that is actually used to boot - * the machine is very hard to detect. Most motherboards go from lowest - * PCI slot number to highest, and the first SCSI controller found is the - * one you boot from. The only exceptions to this are when a controller - * has its BIOS disabled. So, we by default sort all of our SCSI controllers - * from lowest PCI slot number to highest PCI slot number. We also force - * all controllers with their BIOS disabled to the end of the list. This - * works on *almost* all computers. Where it doesn't work, we have this - * option. Setting this option to non-0 will reverse the order of the sort - * to highest first, then lowest, but will still leave cards with their BIOS - * disabled at the very end. That should fix everyone up unless there are - * really strange cirumstances. - */ -static uint32_t aic79xx_reverse_scan; - /* * Should we force EXTENDED translation on a controller. * 0 == Use whatever is in the SEEPROM or default to off @@ -350,7 +331,6 @@ MODULE_PARM_DESC(aic79xx, " periodically to prevent tag starvation.\n" " This may be required by some older disk\n" " or drives/RAID arrays.\n" -" reverse_scan Sort PCI devices highest Bus/Slot to lowest\n" " tag_info: Set per-target tag depth\n" " global_tag_depth: Global tag depth for all targets on all buses\n" " slewrate:Set the signal slew rate (0-15).\n" @@ -1031,7 +1011,6 @@ aic79xx_setup(char *s) #ifdef AHD_DEBUG { "debug", &ahd_debug }, #endif - { "reverse_scan", &aic79xx_reverse_scan }, { "periodic_otag", &aic79xx_periodic_otag }, { "pci_parity", &aic79xx_pci_parity }, { "seltime", &aic79xx_seltime }, diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index debf3e2a0798..aa4be8a31415 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -353,7 +353,6 @@ MODULE_PARM_DESC(aic7xxx, " periodically to prevent tag starvation.\n" " This may be required by some older disk\n" " drives or RAID arrays.\n" -" reverse_scan Sort PCI devices highest Bus/Slot to lowest\n" " tag_info: Set per-target tag depth\n" " global_tag_depth: Global tag depth for every target\n" " on every bus\n" -- cgit v1.2.3 From 6c51fe10475eda9f5c535f337411e1ed0e6915b9 Mon Sep 17 00:00:00 2001 From: Dave C Boutcher Date: Thu, 6 Jul 2006 22:07:47 -0500 Subject: [SCSI] ibmvscsi: allocate lpevents for ibmvscsi on iseries Allocate the correct number of lp events when running ibmvscsi on legacy iseries Signed-off-by: Dave Boutcher Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/iseries_vscsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ibmvscsi/iseries_vscsi.c b/drivers/scsi/ibmvscsi/iseries_vscsi.c index 7eed0b098171..6aeb5f003c3c 100644 --- a/drivers/scsi/ibmvscsi/iseries_vscsi.c +++ b/drivers/scsi/ibmvscsi/iseries_vscsi.c @@ -81,7 +81,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue, int rc; single_host_data = hostdata; - rc = viopath_open(viopath_hostLp, viomajorsubtype_scsi, 0); + rc = viopath_open(viopath_hostLp, viomajorsubtype_scsi, max_requests); if (rc < 0) { printk("viopath_open failed with rc %d in open_event_path\n", rc); -- cgit v1.2.3 From ae0fda0cdf009731a33f031f86df8566f1977ffe Mon Sep 17 00:00:00 2001 From: Dave C Boutcher Date: Thu, 6 Jul 2006 22:08:49 -0500 Subject: [SCSI] ibmvscsi: handle inactive SCSI target during probe Without this patch we register an interrupt with request_irq, but then return a bad return code from the module probe. Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/rpa_vscsi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c index 242b8873b333..ed22b96580c6 100644 --- a/drivers/scsi/ibmvscsi/rpa_vscsi.c +++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c @@ -238,6 +238,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue, if (rc == 2) { /* Adapter is good, but other end is not ready */ printk(KERN_WARNING "ibmvscsi: Partner adapter not ready\n"); + retrc = 0; } else if (rc != 0) { printk(KERN_WARNING "ibmvscsi: Error %d opening adapter\n", rc); goto reg_crq_failed; -- cgit v1.2.3 From 631c228cd09bd5b93090fa60bd9803ec14aa0586 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 8 Jul 2006 20:42:15 +0200 Subject: [SCSI] hide EH backup data outside the scsi_cmnd Currently struct scsi_cmnd has various fields that are used to backup original data after the corresponding fields have been overridden for EH commands. This means drivers can easily get at it and misuse it. Due to the old_ naming this doesn't happen for most of them, but two that have different names have been used wrong a lot (see previous patch). Another downside is that they unessecarily bloat the scsi_cmnd size. This patch moves them onstack in scsi_send_eh_cmnd to fix those two issues aswell as allowing future EH fixes like moving the EH command submissions to use SG lists like everything else. Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley --- drivers/scsi/aha152x.c | 14 ++-- drivers/scsi/scsi.c | 11 +-- drivers/scsi/scsi_error.c | 210 ++++++++++++++++++++-------------------------- drivers/scsi/scsi_lib.c | 88 ++----------------- drivers/scsi/scsi_priv.h | 1 - drivers/scsi/sd.c | 3 +- drivers/scsi/sr.c | 5 +- include/scsi/scsi_cmnd.h | 9 -- 8 files changed, 108 insertions(+), 233 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index cff3d389b010..f974869ea323 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -1179,6 +1179,10 @@ static int aha152x_device_reset(Scsi_Cmnd * SCpnt) DECLARE_MUTEX_LOCKED(sem); struct timer_list timer; int ret, issued, disconnected; + unsigned char old_cmd_len = SCpnt->cmd_len; + unsigned short old_use_sg = SCpnt->use_sg; + void *old_buffer = SCpnt->request_buffer; + unsigned old_bufflen = SCpnt->request_bufflen; unsigned long flags; #if defined(AHA152X_DEBUG) @@ -1212,11 +1216,11 @@ static int aha152x_device_reset(Scsi_Cmnd * SCpnt) add_timer(&timer); down(&sem); del_timer(&timer); - - SCpnt->cmd_len = SCpnt->old_cmd_len; - SCpnt->use_sg = SCpnt->old_use_sg; - SCpnt->request_buffer = SCpnt->buffer; - SCpnt->request_bufflen = SCpnt->bufflen; + + SCpnt->cmd_len = old_cmd_len; + SCpnt->use_sg = old_use_sg; + SCpnt->request_buffer = old_buffer; + SCpnt->request_bufflen = old_bufflen; DO_LOCK(flags); diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 2ab7df0dcfe8..b332caddd5b3 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -346,7 +346,7 @@ void scsi_log_send(struct scsi_cmnd *cmd) if (level > 3) { printk(KERN_INFO "buffer = 0x%p, bufflen = %d," " done = 0x%p, queuecommand 0x%p\n", - cmd->buffer, cmd->bufflen, + cmd->request_buffer, cmd->request_bufflen, cmd->done, sdev->host->hostt->queuecommand); @@ -661,11 +661,6 @@ void __scsi_done(struct scsi_cmnd *cmd) */ int scsi_retry_command(struct scsi_cmnd *cmd) { - /* - * Restore the SCSI command state. - */ - scsi_setup_cmd_retry(cmd); - /* * Zero the sense information from the last time we tried * this command. @@ -711,10 +706,6 @@ void scsi_finish_command(struct scsi_cmnd *cmd) "Notifying upper driver of completion " "(result %x)\n", cmd->result)); - /* - * We can get here with use_sg=0, causing a panic in the upper level - */ - cmd->use_sg = cmd->old_use_sg; cmd->done(cmd); } EXPORT_SYMBOL(scsi_finish_command); diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 6683d596234a..6a5b731bd5ba 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -460,19 +460,67 @@ static void scsi_eh_done(struct scsi_cmnd *scmd) * Return value: * SUCCESS or FAILED or NEEDS_RETRY **/ -static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout) +static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout, int copy_sense) { struct scsi_device *sdev = scmd->device; struct Scsi_Host *shost = sdev->host; + int old_result = scmd->result; DECLARE_COMPLETION(done); unsigned long timeleft; unsigned long flags; + unsigned char old_cmnd[MAX_COMMAND_SIZE]; + enum dma_data_direction old_data_direction; + unsigned short old_use_sg; + unsigned char old_cmd_len; + unsigned old_bufflen; + void *old_buffer; int rtn; + /* + * We need saved copies of a number of fields - this is because + * error handling may need to overwrite these with different values + * to run different commands, and once error handling is complete, + * we will need to restore these values prior to running the actual + * command. + */ + old_buffer = scmd->request_buffer; + old_bufflen = scmd->request_bufflen; + memcpy(old_cmnd, scmd->cmnd, sizeof(scmd->cmnd)); + old_data_direction = scmd->sc_data_direction; + old_cmd_len = scmd->cmd_len; + old_use_sg = scmd->use_sg; + + if (copy_sense) { + int gfp_mask = GFP_ATOMIC; + + if (shost->hostt->unchecked_isa_dma) + gfp_mask |= __GFP_DMA; + + scmd->sc_data_direction = DMA_FROM_DEVICE; + scmd->request_bufflen = 252; + scmd->request_buffer = kzalloc(scmd->request_bufflen, gfp_mask); + if (!scmd->request_buffer) + return FAILED; + } else { + scmd->request_buffer = NULL; + scmd->request_bufflen = 0; + scmd->sc_data_direction = DMA_NONE; + } + + scmd->underflow = 0; + scmd->use_sg = 0; + scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); + if (sdev->scsi_level <= SCSI_2) scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) | (sdev->lun << 5 & 0xe0); + /* + * Zero the sense buffer. The scsi spec mandates that any + * untransferred sense data should be interpreted as being zero. + */ + memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer)); + shost->eh_action = &done; spin_lock_irqsave(shost->host_lock, flags); @@ -522,6 +570,29 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout) rtn = FAILED; } + + /* + * Last chance to have valid sense data. + */ + if (copy_sense) { + if (!SCSI_SENSE_VALID(scmd)) { + memcpy(scmd->sense_buffer, scmd->request_buffer, + sizeof(scmd->sense_buffer)); + } + kfree(scmd->request_buffer); + } + + + /* + * Restore original data + */ + scmd->request_buffer = old_buffer; + scmd->request_bufflen = old_bufflen; + memcpy(scmd->cmnd, old_cmnd, sizeof(scmd->cmnd)); + scmd->sc_data_direction = old_data_direction; + scmd->cmd_len = old_cmd_len; + scmd->use_sg = old_use_sg; + scmd->result = old_result; return rtn; } @@ -537,56 +608,10 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout) static int scsi_request_sense(struct scsi_cmnd *scmd) { static unsigned char generic_sense[6] = - {REQUEST_SENSE, 0, 0, 0, 252, 0}; - unsigned char *scsi_result; - int saved_result; - int rtn; + {REQUEST_SENSE, 0, 0, 0, 252, 0}; memcpy(scmd->cmnd, generic_sense, sizeof(generic_sense)); - - scsi_result = kmalloc(252, GFP_ATOMIC | ((scmd->device->host->hostt->unchecked_isa_dma) ? __GFP_DMA : 0)); - - - if (unlikely(!scsi_result)) { - printk(KERN_ERR "%s: cannot allocate scsi_result.\n", - __FUNCTION__); - return FAILED; - } - - /* - * zero the sense buffer. some host adapters automatically always - * request sense, so it is not a good idea that - * scmd->request_buffer and scmd->sense_buffer point to the same - * address (db). 0 is not a valid sense code. - */ - memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer)); - memset(scsi_result, 0, 252); - - saved_result = scmd->result; - scmd->request_buffer = scsi_result; - scmd->request_bufflen = 252; - scmd->use_sg = 0; - scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); - scmd->sc_data_direction = DMA_FROM_DEVICE; - scmd->underflow = 0; - - rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT); - - /* last chance to have valid sense data */ - if(!SCSI_SENSE_VALID(scmd)) { - memcpy(scmd->sense_buffer, scmd->request_buffer, - sizeof(scmd->sense_buffer)); - } - - kfree(scsi_result); - - /* - * when we eventually call scsi_finish, we really wish to complete - * the original request, so let's restore the original data. (db) - */ - scsi_setup_cmd_retry(scmd); - scmd->result = saved_result; - return rtn; + return scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 1); } /** @@ -605,12 +630,6 @@ void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q) { scmd->device->host->host_failed--; scmd->eh_eflags = 0; - - /* - * set this back so that the upper level can correctly free up - * things. - */ - scsi_setup_cmd_retry(scmd); list_move_tail(&scmd->eh_entry, done_q); } EXPORT_SYMBOL(scsi_eh_finish_cmd); @@ -715,47 +734,26 @@ static int scsi_eh_tur(struct scsi_cmnd *scmd) { static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0}; int retry_cnt = 1, rtn; - int saved_result; retry_tur: memcpy(scmd->cmnd, tur_command, sizeof(tur_command)); - /* - * zero the sense buffer. the scsi spec mandates that any - * untransferred sense data should be interpreted as being zero. - */ - memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer)); - - saved_result = scmd->result; - scmd->request_buffer = NULL; - scmd->request_bufflen = 0; - scmd->use_sg = 0; - scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); - scmd->underflow = 0; - scmd->sc_data_direction = DMA_NONE; - rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT); + rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 0); - /* - * when we eventually call scsi_finish, we really wish to complete - * the original request, so let's restore the original data. (db) - */ - scsi_setup_cmd_retry(scmd); - scmd->result = saved_result; - - /* - * hey, we are done. let's look to see what happened. - */ SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n", __FUNCTION__, scmd, rtn)); - if (rtn == SUCCESS) - return 0; - else if (rtn == NEEDS_RETRY) { + + switch (rtn) { + case NEEDS_RETRY: if (retry_cnt--) goto retry_tur; + /*FALLTHRU*/ + case SUCCESS: return 0; + default: + return 1; } - return 1; } /** @@ -837,44 +835,16 @@ static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd) static int scsi_eh_try_stu(struct scsi_cmnd *scmd) { static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0}; - int rtn; - int saved_result; - if (!scmd->device->allow_restart) - return 1; - - memcpy(scmd->cmnd, stu_command, sizeof(stu_command)); - - /* - * zero the sense buffer. the scsi spec mandates that any - * untransferred sense data should be interpreted as being zero. - */ - memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer)); - - saved_result = scmd->result; - scmd->request_buffer = NULL; - scmd->request_bufflen = 0; - scmd->use_sg = 0; - scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); - scmd->underflow = 0; - scmd->sc_data_direction = DMA_NONE; + if (scmd->device->allow_restart) { + int rtn; - rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT); - - /* - * when we eventually call scsi_finish, we really wish to complete - * the original request, so let's restore the original data. (db) - */ - scsi_setup_cmd_retry(scmd); - scmd->result = saved_result; + memcpy(scmd->cmnd, stu_command, sizeof(stu_command)); + rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT, 0); + if (rtn == SUCCESS) + return 0; + } - /* - * hey, we are done. let's look to see what happened. - */ - SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n", - __FUNCTION__, scmd, rtn)); - if (rtn == SUCCESS) - return 0; return 1; } @@ -1684,8 +1654,6 @@ scsi_reset_provider(struct scsi_device *dev, int flag) scmd->scsi_done = scsi_reset_provider_done_command; scmd->done = NULL; - scmd->buffer = NULL; - scmd->bufflen = 0; scmd->request_buffer = NULL; scmd->request_bufflen = 0; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 08af9aae7df3..077c1c691210 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -436,60 +436,16 @@ EXPORT_SYMBOL_GPL(scsi_execute_async); * * Arguments: cmd - command that is ready to be queued. * - * Returns: Nothing - * * Notes: This function has the job of initializing a number of * fields related to error handling. Typically this will * be called once for each command, as required. */ -static int scsi_init_cmd_errh(struct scsi_cmnd *cmd) +static void scsi_init_cmd_errh(struct scsi_cmnd *cmd) { cmd->serial_number = 0; - memset(cmd->sense_buffer, 0, sizeof cmd->sense_buffer); - if (cmd->cmd_len == 0) cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]); - - /* - * We need saved copies of a number of fields - this is because - * error handling may need to overwrite these with different values - * to run different commands, and once error handling is complete, - * we will need to restore these values prior to running the actual - * command. - */ - cmd->old_use_sg = cmd->use_sg; - cmd->old_cmd_len = cmd->cmd_len; - cmd->sc_old_data_direction = cmd->sc_data_direction; - cmd->old_underflow = cmd->underflow; - memcpy(cmd->data_cmnd, cmd->cmnd, sizeof(cmd->cmnd)); - cmd->buffer = cmd->request_buffer; - cmd->bufflen = cmd->request_bufflen; - - return 1; -} - -/* - * Function: scsi_setup_cmd_retry() - * - * Purpose: Restore the command state for a retry - * - * Arguments: cmd - command to be restored - * - * Returns: Nothing - * - * Notes: Immediately prior to retrying a command, we need - * to restore certain fields that we saved above. - */ -void scsi_setup_cmd_retry(struct scsi_cmnd *cmd) -{ - memcpy(cmd->cmnd, cmd->data_cmnd, sizeof(cmd->data_cmnd)); - cmd->request_buffer = cmd->buffer; - cmd->request_bufflen = cmd->bufflen; - cmd->use_sg = cmd->old_use_sg; - cmd->cmd_len = cmd->old_cmd_len; - cmd->sc_data_direction = cmd->sc_old_data_direction; - cmd->underflow = cmd->old_underflow; } void scsi_device_unbusy(struct scsi_device *sdev) @@ -807,22 +763,13 @@ static void scsi_free_sgtable(struct scatterlist *sgl, int index) */ static void scsi_release_buffers(struct scsi_cmnd *cmd) { - struct request *req = cmd->request; - - /* - * Free up any indirection buffers we allocated for DMA purposes. - */ if (cmd->use_sg) scsi_free_sgtable(cmd->request_buffer, cmd->sglist_len); - else if (cmd->request_buffer != req->buffer) - kfree(cmd->request_buffer); /* * Zero these out. They now point to freed memory, and it is * dangerous to hang onto the pointers. */ - cmd->buffer = NULL; - cmd->bufflen = 0; cmd->request_buffer = NULL; cmd->request_bufflen = 0; } @@ -858,7 +805,7 @@ static void scsi_release_buffers(struct scsi_cmnd *cmd) void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) { int result = cmd->result; - int this_count = cmd->bufflen; + int this_count = cmd->request_bufflen; request_queue_t *q = cmd->device->request_queue; struct request *req = cmd->request; int clear_errors = 1; @@ -866,28 +813,14 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) int sense_valid = 0; int sense_deferred = 0; - /* - * Free up any indirection buffers we allocated for DMA purposes. - * For the case of a READ, we need to copy the data out of the - * bounce buffer and into the real buffer. - */ - if (cmd->use_sg) - scsi_free_sgtable(cmd->buffer, cmd->sglist_len); - else if (cmd->buffer != req->buffer) { - if (rq_data_dir(req) == READ) { - unsigned long flags; - char *to = bio_kmap_irq(req->bio, &flags); - memcpy(to, cmd->buffer, cmd->bufflen); - bio_kunmap_irq(to, &flags); - } - kfree(cmd->buffer); - } + scsi_release_buffers(cmd); if (result) { sense_valid = scsi_command_normalize_sense(cmd, &sshdr); if (sense_valid) sense_deferred = scsi_sense_is_deferred(&sshdr); } + if (blk_pc_request(req)) { /* SG_IO ioctl from block level */ req->errors = result; if (result) { @@ -907,15 +840,6 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) req->data_len = cmd->resid; } - /* - * Zero these out. They now point to freed memory, and it is - * dangerous to hang onto the pointers. - */ - cmd->buffer = NULL; - cmd->bufflen = 0; - cmd->request_buffer = NULL; - cmd->request_bufflen = 0; - /* * Next deal with any sectors which we were able to correctly * handle. @@ -1012,7 +936,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) if (!(req->flags & REQ_QUIET)) { scmd_printk(KERN_INFO, cmd, "Volume overflow, CDB: "); - __scsi_print_command(cmd->data_cmnd); + __scsi_print_command(cmd->cmnd); scsi_print_sense("", cmd); } /* See SSC3rXX or current. */ @@ -1143,7 +1067,7 @@ static void scsi_blk_pc_done(struct scsi_cmnd *cmd) * successfully. Since this is a REQ_BLOCK_PC command the * caller should check the request's errors value */ - scsi_io_completion(cmd, cmd->bufflen); + scsi_io_completion(cmd, cmd->request_bufflen); } static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd) diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index e2fbe9a9d5a9..ae24c85aaeea 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -57,7 +57,6 @@ extern int scsi_eh_scmd_add(struct scsi_cmnd *, int); /* scsi_lib.c */ extern int scsi_maybe_unblock_host(struct scsi_device *sdev); -extern void scsi_setup_cmd_retry(struct scsi_cmnd *cmd); extern void scsi_device_unbusy(struct scsi_device *sdev); extern int scsi_queue_insert(struct scsi_cmnd *cmd, int reason); extern void scsi_next_command(struct scsi_cmnd *cmd); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 3225d31449e1..98bd3aab9739 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -502,8 +502,7 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) SCpnt->cmnd[4] = (unsigned char) this_count; SCpnt->cmnd[5] = 0; } - SCpnt->request_bufflen = SCpnt->bufflen = - this_count * sdp->sector_size; + SCpnt->request_bufflen = this_count * sdp->sector_size; /* * We shouldn't disconnect in the middle of a sector, so with a dumb diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index fd94408577e5..fae6e95a6298 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -360,7 +360,7 @@ static int sr_init_command(struct scsi_cmnd * SCpnt) "mismatch count %d, bytes %d\n", size, SCpnt->request_bufflen); if (SCpnt->request_bufflen > size) - SCpnt->request_bufflen = SCpnt->bufflen = size; + SCpnt->request_bufflen = size; } } @@ -387,8 +387,7 @@ static int sr_init_command(struct scsi_cmnd * SCpnt) if (this_count > 0xffff) { this_count = 0xffff; - SCpnt->request_bufflen = SCpnt->bufflen = - this_count * s_size; + SCpnt->request_bufflen = this_count * s_size; } SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff; diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 371f70d9aa92..58e6444eebee 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -58,9 +58,7 @@ struct scsi_cmnd { int timeout_per_command; unsigned char cmd_len; - unsigned char old_cmd_len; enum dma_data_direction sc_data_direction; - enum dma_data_direction sc_old_data_direction; /* These elements define the operation we are about to perform */ #define MAX_COMMAND_SIZE 16 @@ -71,18 +69,11 @@ struct scsi_cmnd { void *request_buffer; /* Actual requested buffer */ /* These elements define the operation we ultimately want to perform */ - unsigned char data_cmnd[MAX_COMMAND_SIZE]; - unsigned short old_use_sg; /* We save use_sg here when requesting - * sense info */ unsigned short use_sg; /* Number of pieces of scatter-gather */ unsigned short sglist_len; /* size of malloc'd scatter-gather list */ - unsigned bufflen; /* Size of data buffer */ - void *buffer; /* Data buffer */ unsigned underflow; /* Return error if less than this amount is transferred */ - unsigned old_underflow; /* save underflow here when reusing the - * command for error handling */ unsigned transfersize; /* How much we are guaranteed to transfer with each SCSI transfer -- cgit v1.2.3 From b4cac1a0227a6f84be0381cd350a3c8730a4a671 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 10 Jul 2006 04:44:54 -0700 Subject: [PATCH] FDPIC: Move roundup() into linux/kernel.h Move the roundup() macro from binfmt_elf.c into linux/kernel.h as it's generally useful. [akpm@osdl.org: nuke all the other implementations] Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mips/kernel/irixelf.c | 2 -- drivers/scsi/aic7xxx/aic79xx_osm.h | 1 - fs/binfmt_elf.c | 2 -- fs/proc/kcore.c | 2 -- fs/xfs/linux-2.6/xfs_linux.h | 1 - include/linux/kernel.h | 1 + 6 files changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers/scsi') diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c index 10d3644e3608..ab12c8f01518 100644 --- a/arch/mips/kernel/irixelf.c +++ b/arch/mips/kernel/irixelf.c @@ -999,8 +999,6 @@ static inline int maydump(struct vm_area_struct *vma) return 1; } -#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) - /* An ELF note in memory. */ struct memelfnote { diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.h b/drivers/scsi/aic7xxx/aic79xx_osm.h index 9e871de23835..601340d84410 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.h +++ b/drivers/scsi/aic7xxx/aic79xx_osm.h @@ -93,7 +93,6 @@ #endif /********************************** Misc Macros *******************************/ -#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) #define powerof2(x) ((((x)-1)&(x))==0) /************************* Forward Declarations *******************************/ diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index f42e64210ee5..672a3b90bc55 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1185,8 +1185,6 @@ static int maydump(struct vm_area_struct *vma) return 1; } -#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) - /* An ELF note in memory */ struct memelfnote { diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c index 036d14d83627..8d6d85d7400f 100644 --- a/fs/proc/kcore.c +++ b/fs/proc/kcore.c @@ -42,8 +42,6 @@ const struct file_operations proc_kcore_operations = { #define kc_offset_to_vaddr(o) ((o) + PAGE_OFFSET) #endif -#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) - /* An ELF note in memory */ struct memelfnote { diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/linux-2.6/xfs_linux.h index 8c021dc57d1f..a13f75c1a936 100644 --- a/fs/xfs/linux-2.6/xfs_linux.h +++ b/fs/xfs/linux-2.6/xfs_linux.h @@ -215,7 +215,6 @@ BUFFER_FNS(PrivateStart, unwritten); #define MIN(a,b) (min(a,b)) #define MAX(a,b) (max(a,b)) #define howmany(x, y) (((x)+((y)-1))/(y)) -#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) /* * Various platform dependent calls that don't fit anywhere else diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 5c1ec1f84eab..181c69cad4e3 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -33,6 +33,7 @@ extern const char linux_banner[]; #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) #define ALIGN(x,a) (((x)+(a)-1)&~((a)-1)) #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) +#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) #define KERN_EMERG "<0>" /* system is unusable */ #define KERN_ALERT "<1>" /* action must be taken immediately */ -- cgit v1.2.3 From a0e1b6ef3b851fe6f1dcc259432e83de79ce5e7f Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 9 Jul 2006 12:38:19 -0500 Subject: [SCSI] scsi_transport_sas: add expander backlink This patch adds the ability to add a backlink to a particular port. The idea is to represent properly ports on expanders that are used specifically for linking to the parent device in the topology. Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_sas.c | 20 ++++++++++++++++++++ include/scsi/scsi_transport_sas.h | 3 +++ 2 files changed, 23 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 9bb4e37a1a61..7871bc25fafb 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -692,6 +692,13 @@ void sas_port_delete(struct sas_port *port) } mutex_unlock(&port->phy_list_mutex); + if (port->is_backlink) { + struct device *parent = port->dev.parent; + + sysfs_remove_link(&port->dev.kobj, parent->bus_id); + port->is_backlink = 0; + } + transport_remove_device(dev); device_del(dev); transport_destroy_device(dev); @@ -767,6 +774,19 @@ void sas_port_delete_phy(struct sas_port *port, struct sas_phy *phy) } EXPORT_SYMBOL(sas_port_delete_phy); +void sas_port_mark_backlink(struct sas_port *port) +{ + struct device *parent = port->dev.parent->parent->parent; + + if (port->is_backlink) + return; + port->is_backlink = 1; + sysfs_create_link(&port->dev.kobj, &parent->kobj, + parent->bus_id); + +} +EXPORT_SYMBOL(sas_port_mark_backlink); + /* * SAS remote PHY attributes. */ diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index f5772ff61d0d..6cc2314098cf 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -130,6 +130,8 @@ struct sas_port { int port_identifier; int num_phys; + /* port flags */ + unsigned int is_backlink:1; /* the other end of the link */ struct sas_rphy *rphy; @@ -175,6 +177,7 @@ void sas_port_free(struct sas_port *); void sas_port_delete(struct sas_port *); void sas_port_add_phy(struct sas_port *, struct sas_phy *); void sas_port_delete_phy(struct sas_port *, struct sas_phy *); +void sas_port_mark_backlink(struct sas_port *); int scsi_is_sas_port(const struct device *); extern struct scsi_transport_template * -- cgit v1.2.3 From e8bf39417b578a11e2ee2cd16e794a5b2d40757b Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 11 Jul 2006 17:49:34 -0400 Subject: [SCSI] scsi_transport_sas: kill the use of channel Using the port_id for the channel is completely unnecessary since the host_id/target_id are constructed to be globally unique. Also move the mptsas driver on to virtual channel 1 for its raid devices. Acked-by: "Moore, Eric" Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.h | 1 - drivers/message/fusion/mptsas.c | 56 +++++++++++++++------------------------ drivers/scsi/scsi_transport_sas.c | 8 +++--- 3 files changed, 24 insertions(+), 41 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index 0b555e2309f4..014e1de0f7cb 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -634,7 +634,6 @@ typedef struct _MPT_ADAPTER u16 handle; int sas_index; /* index refrencing */ MPT_SAS_MGMT sas_mgmt; - int num_ports; struct work_struct sas_persist_task; struct work_struct fc_setup_reset_work; diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 0fb7d5881f4f..b28e930528e8 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -67,6 +67,11 @@ #define my_VERSION MPT_LINUX_VERSION_COMMON #define MYNAM "mptsas" +/* + * Reserved channel for integrated raid + */ +#define MPTSAS_RAID_CHANNEL 1 + MODULE_AUTHOR(MODULEAUTHOR); MODULE_DESCRIPTION(my_NAME); MODULE_LICENSE("GPL"); @@ -644,16 +649,13 @@ mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure, static int mptsas_slave_configure(struct scsi_device *sdev) { - struct Scsi_Host *host = sdev->host; - MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; - /* - * RAID volumes placed beyond the last expected port. - * Ignore sending sas mode pages in that case.. - */ - if (sdev->channel < hd->ioc->num_ports) - sas_read_port_mode_page(sdev); + if (sdev->channel == MPTSAS_RAID_CHANNEL) + goto out; + + sas_read_port_mode_page(sdev); + out: return mptscsih_slave_configure(sdev); } @@ -682,10 +684,7 @@ mptsas_target_alloc(struct scsi_target *starget) hd->Targets[target_id] = vtarget; - /* - * RAID volumes placed beyond the last expected port. - */ - if (starget->channel == hd->ioc->num_ports) + if (starget->channel == MPTSAS_RAID_CHANNEL) goto out; rphy = dev_to_rphy(starget->dev.parent); @@ -736,7 +735,7 @@ mptsas_target_destroy(struct scsi_target *starget) if (!starget->hostdata) return; - if (starget->channel == hd->ioc->num_ports) + if (starget->channel == MPTSAS_RAID_CHANNEL) goto out; rphy = dev_to_rphy(starget->dev.parent); @@ -776,10 +775,7 @@ mptsas_slave_alloc(struct scsi_device *sdev) starget = scsi_target(sdev); vdev->vtarget = starget->hostdata; - /* - * RAID volumes placed beyond the last expected port. - */ - if (sdev->channel == hd->ioc->num_ports) + if (sdev->channel == MPTSAS_RAID_CHANNEL) goto out; rphy = dev_to_rphy(sdev->sdev_target->dev.parent); @@ -1728,7 +1724,6 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc) hba = NULL; } mutex_unlock(&ioc->sas_topology_mutex); - ioc->num_ports = port_info->num_phys; for (i = 0; i < port_info->num_phys; i++) { mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i], @@ -1977,7 +1972,7 @@ mptsas_scan_sas_topology(MPT_ADAPTER *ioc) if (!ioc->raid_data.pIocPg2->NumActiveVolumes) goto out; for (i=0; iraid_data.pIocPg2->NumActiveVolumes; i++) { - scsi_add_device(ioc->sh, ioc->num_ports, + scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0); } out: @@ -2283,35 +2278,26 @@ mptsas_hotplug_work(void *arg) mptsas_set_rphy(phy_info, rphy); break; case MPTSAS_ADD_RAID: - sdev = scsi_device_lookup( - ioc->sh, - ioc->num_ports, - ev->id, - 0); + sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, + ev->id, 0); if (sdev) { scsi_device_put(sdev); break; } printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, id %d\n", - ioc->name, ioc->num_ports, ev->id); - scsi_add_device(ioc->sh, - ioc->num_ports, - ev->id, - 0); + ioc->name, MPTSAS_RAID_CHANNEL, ev->id); + scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, ev->id, 0); mpt_findImVolumes(ioc); break; case MPTSAS_DEL_RAID: - sdev = scsi_device_lookup( - ioc->sh, - ioc->num_ports, - ev->id, - 0); + sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, + ev->id, 0); if (!sdev) break; printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, id %d\n", - ioc->name, ioc->num_ports, ev->id); + ioc->name, MPTSAS_RAID_CHANNEL, ev->id); vdevice = sdev->hostdata; vdevice->vtarget->deleted = 1; mptsas_target_reset(ioc, vdevice->vtarget); diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 7871bc25fafb..5a625c3fddae 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -1194,7 +1194,7 @@ int sas_rphy_add(struct sas_rphy *rphy) if (identify->device_type == SAS_END_DEVICE && rphy->scsi_target_id != -1) { - scsi_scan_target(&rphy->dev, parent->port_identifier, + scsi_scan_target(&rphy->dev, 0, rphy->scsi_target_id, ~0, 0); } @@ -1296,15 +1296,13 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel, mutex_lock(&sas_host->lock); list_for_each_entry(rphy, &sas_host->rphy_list, list) { - struct sas_port *parent = dev_to_sas_port(rphy->dev.parent); - if (rphy->identify.device_type != SAS_END_DEVICE || rphy->scsi_target_id == -1) continue; - if ((channel == SCAN_WILD_CARD || channel == parent->port_identifier) && + if ((channel == SCAN_WILD_CARD || channel == 0) && (id == SCAN_WILD_CARD || id == rphy->scsi_target_id)) { - scsi_scan_target(&rphy->dev, parent->port_identifier, + scsi_scan_target(&rphy->dev, 0, rphy->scsi_target_id, lun, 1); } } -- cgit v1.2.3 From 6ecaff7fe84eb64796d8dfe667439290b4acfad0 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 11 Jul 2006 20:53:22 -0700 Subject: [SCSI] scsi_debug: must_check fixes Check all __must_check warnings in scsi_debug. Signed-off-by: Randy Dunlap Signed-off-by: Douglas Gilbert Signed-off-by: James Bottomley --- drivers/scsi/scsi_debug.c | 72 +++++++++++++++++++++++++++++++++++------------ 1 file changed, 54 insertions(+), 18 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 9c63b00773c4..a80303c6b3fd 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -286,7 +286,7 @@ static int inquiry_evpd_83(unsigned char * arr, int target_dev_id, int dev_id_num, const char * dev_id_str, int dev_id_str_len); static int inquiry_evpd_88(unsigned char * arr, int target_dev_id); -static void do_create_driverfs_files(void); +static int do_create_driverfs_files(void); static void do_remove_driverfs_files(void); static int sdebug_add_adapter(void); @@ -2487,19 +2487,22 @@ static ssize_t sdebug_add_host_store(struct device_driver * ddp, DRIVER_ATTR(add_host, S_IRUGO | S_IWUSR, sdebug_add_host_show, sdebug_add_host_store); -static void do_create_driverfs_files(void) +static int do_create_driverfs_files(void) { - driver_create_file(&sdebug_driverfs_driver, &driver_attr_add_host); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_delay); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_dsense); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_every_nth); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_luns); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_parts); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_ptype); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_opts); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_scsi_level); + int ret; + + ret = driver_create_file(&sdebug_driverfs_driver, &driver_attr_add_host); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_delay); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dsense); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_every_nth); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_luns); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_parts); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_ptype); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_opts); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_scsi_level); + return ret; } static void do_remove_driverfs_files(void) @@ -2522,6 +2525,7 @@ static int __init scsi_debug_init(void) unsigned int sz; int host_to_add; int k; + int ret; if (scsi_debug_dev_size_mb < 1) scsi_debug_dev_size_mb = 1; /* force minimum 1 MB ramdisk */ @@ -2560,12 +2564,32 @@ static int __init scsi_debug_init(void) if (scsi_debug_num_parts > 0) sdebug_build_parts(fake_storep); - init_all_queued(); + ret = device_register(&pseudo_primary); + if (ret < 0) { + printk(KERN_WARNING "scsi_debug: device_register error: %d\n", + ret); + goto free_vm; + } + ret = bus_register(&pseudo_lld_bus); + if (ret < 0) { + printk(KERN_WARNING "scsi_debug: bus_register error: %d\n", + ret); + goto dev_unreg; + } + ret = driver_register(&sdebug_driverfs_driver); + if (ret < 0) { + printk(KERN_WARNING "scsi_debug: driver_register error: %d\n", + ret); + goto bus_unreg; + } + ret = do_create_driverfs_files(); + if (ret < 0) { + printk(KERN_WARNING "scsi_debug: driver_create_file error: %d\n", + ret); + goto del_files; + } - device_register(&pseudo_primary); - bus_register(&pseudo_lld_bus); - driver_register(&sdebug_driverfs_driver); - do_create_driverfs_files(); + init_all_queued(); sdebug_driver_template.proc_name = (char *)sdebug_proc_name; @@ -2585,6 +2609,18 @@ static int __init scsi_debug_init(void) scsi_debug_add_host); } return 0; + +del_files: + do_remove_driverfs_files(); + driver_unregister(&sdebug_driverfs_driver); +bus_unreg: + bus_unregister(&pseudo_lld_bus); +dev_unreg: + device_unregister(&pseudo_primary); +free_vm: + vfree(fake_storep); + + return ret; } static void __exit scsi_debug_exit(void) -- cgit v1.2.3 From 3bb056eb1df236f3344426860e584a8981486334 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 12 Jul 2006 11:55:39 -0400 Subject: [SCSI] NCR_D700: misc fixes (section and argument ordering) Apparently the D700 has had an argument ordering issue for quite a while which can cause it to get the wrong scsi_id (I just got an unbootable voyager system because of this). Hopefully this patch also fixes up all the sectional mismatches within the driver. Signed-off-by: James Bottomley --- drivers/scsi/NCR_D700.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/NCR_D700.c b/drivers/scsi/NCR_D700.c index a06f547e87f7..d05681f9d81a 100644 --- a/drivers/scsi/NCR_D700.c +++ b/drivers/scsi/NCR_D700.c @@ -114,7 +114,7 @@ MODULE_DESCRIPTION("NCR Dual700 SCSI Driver"); MODULE_LICENSE("GPL"); module_param(NCR_D700, charp, 0); -static __u8 __initdata id_array[2*(MCA_MAX_SLOT_NR + 1)] = +static __u8 __devinitdata id_array[2*(MCA_MAX_SLOT_NR + 1)] = { [0 ... 2*(MCA_MAX_SLOT_NR + 1)-1] = 7 }; #ifdef MODULE @@ -173,7 +173,7 @@ struct NCR_D700_private { char pad; }; -static int +static int __devinit NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq, int slot, u32 region, int differential) { @@ -243,7 +243,7 @@ NCR_D700_intr(int irq, void *data, struct pt_regs *regs) * essentially connectecd to the MCA bus independently, it is easier * to set them up as two separate host adapters, rather than one * adapter with two channels */ -static int +static int __devinit NCR_D700_probe(struct device *dev) { struct NCR_D700_private *p; @@ -329,7 +329,7 @@ NCR_D700_probe(struct device *dev) for (i = 0; i < 2; i++) { int err; - if ((err = NCR_D700_probe_one(p, i, slot, irq, + if ((err = NCR_D700_probe_one(p, i, irq, slot, offset_addr + (0x80 * i), differential)) != 0) printk("D700: SIOP%d: probe failed, error = %d\n", @@ -349,7 +349,7 @@ NCR_D700_probe(struct device *dev) return 0; } -static void +static void __devexit NCR_D700_remove_one(struct Scsi_Host *host) { scsi_remove_host(host); @@ -359,7 +359,7 @@ NCR_D700_remove_one(struct Scsi_Host *host) release_region(host->base, 64); } -static int +static int __devexit NCR_D700_remove(struct device *dev) { struct NCR_D700_private *p = dev_get_drvdata(dev); @@ -380,7 +380,7 @@ static struct mca_driver NCR_D700_driver = { .name = "NCR_D700", .bus = &mca_bus_type, .probe = NCR_D700_probe, - .remove = NCR_D700_remove, + .remove = __devexit_p(NCR_D700_remove), }, }; -- cgit v1.2.3 From 79bd3f8563a275d1d068bbb9189a746dc6e96f3e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 14 Jul 2006 10:29:34 +0200 Subject: [SCSI] More buffer->request_buffer changes Seem like quite a few splipped through the cracks. Here's a patch to update all references I could find: Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley --- drivers/fc4/fc.c | 4 ++-- drivers/scsi/53c7xx.c | 8 ++++---- drivers/scsi/NCR53C9x.c | 2 +- drivers/scsi/atari_NCR5380.c | 2 +- drivers/scsi/esp.c | 4 ++-- drivers/scsi/jazz_esp.c | 2 +- drivers/scsi/mac53c94.c | 2 +- drivers/scsi/mesh.c | 2 +- drivers/scsi/pluto.c | 2 -- drivers/scsi/qlogicpti.c | 4 ++-- drivers/scsi/seagate.c | 2 +- drivers/scsi/sun3_NCR5380.c | 2 +- drivers/scsi/sun3x_esp.c | 2 +- drivers/scsi/wd33c93.c | 2 +- 14 files changed, 19 insertions(+), 21 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/fc4/fc.c b/drivers/fc4/fc.c index 66d03f242d3c..1a159e8843ca 100644 --- a/drivers/fc4/fc.c +++ b/drivers/fc4/fc.c @@ -429,7 +429,7 @@ static inline void fcp_scsi_receive(fc_channel *fc, int token, int status, fc_hd if (fcmd->data) { if (SCpnt->use_sg) - dma_unmap_sg(fc->dev, (struct scatterlist *)SCpnt->buffer, + dma_unmap_sg(fc->dev, (struct scatterlist *)SCpnt->request_buffer, SCpnt->use_sg, SCpnt->sc_data_direction); else @@ -810,7 +810,7 @@ static int fcp_scsi_queue_it(fc_channel *fc, Scsi_Cmnd *SCpnt, fcp_cmnd *fcmd, i SCpnt->request_bufflen, SCpnt->sc_data_direction); } else { - struct scatterlist *sg = (struct scatterlist *)SCpnt->buffer; + struct scatterlist *sg = (struct scatterlist *)SCpnt->request_buffer; int nents; FCD(("XXX: Use_sg %d %d\n", SCpnt->use_sg, sg->length)) diff --git a/drivers/scsi/53c7xx.c b/drivers/scsi/53c7xx.c index c690c2b89e41..acf292736b4e 100644 --- a/drivers/scsi/53c7xx.c +++ b/drivers/scsi/53c7xx.c @@ -3451,12 +3451,12 @@ create_cmd (Scsi_Cmnd *cmd) { for (i = 0; cmd->use_sg ? (i < cmd->use_sg) : !i; cmd_datain += 4, cmd_dataout += 4, ++i) { u32 vbuf = cmd->use_sg - ? (u32)page_address(((struct scatterlist *)cmd->buffer)[i].page)+ - ((struct scatterlist *)cmd->buffer)[i].offset + ? (u32)page_address(((struct scatterlist *)cmd->request_buffer)[i].page)+ + ((struct scatterlist *)cmd->request_buffer)[i].offset : (u32)(cmd->request_buffer); u32 bbuf = virt_to_bus((void *)vbuf); u32 count = cmd->use_sg ? - ((struct scatterlist *)cmd->buffer)[i].length : + ((struct scatterlist *)cmd->request_buffer)[i].length : cmd->request_bufflen; /* @@ -5417,7 +5417,7 @@ insn_to_offset (Scsi_Cmnd *cmd, u32 *insn) { if ((buffers = cmd->use_sg)) { for (offset = 0, - segment = (struct scatterlist *) cmd->buffer; + segment = (struct scatterlist *) cmd->request_buffer; buffers && !((found = ((ptr >= (char *)page_address(segment->page)+segment->offset) && (ptr < ((char *)page_address(segment->page)+segment->offset+segment->length))))); --buffers, offset += segment->length, ++segment) diff --git a/drivers/scsi/NCR53C9x.c b/drivers/scsi/NCR53C9x.c index 8a4659e94105..085db4826e0e 100644 --- a/drivers/scsi/NCR53C9x.c +++ b/drivers/scsi/NCR53C9x.c @@ -911,7 +911,7 @@ static void esp_get_dmabufs(struct NCR_ESP *esp, Scsi_Cmnd *sp) sp->SCp.ptr = (char *) virt_to_phys(sp->request_buffer); } else { - sp->SCp.buffer = (struct scatterlist *) sp->buffer; + sp->SCp.buffer = (struct scatterlist *) sp->request_buffer; sp->SCp.buffers_residual = sp->use_sg - 1; sp->SCp.this_residual = sp->SCp.buffer->length; if (esp->dma_mmu_get_scsi_sgl) diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index 007a14e5c3fd..e397129c90d1 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -507,7 +507,7 @@ static __inline__ void initialize_SCp(Scsi_Cmnd *cmd) */ if (cmd->use_sg) { - cmd->SCp.buffer = (struct scatterlist *) cmd->buffer; + cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer; cmd->SCp.buffers_residual = cmd->use_sg - 1; cmd->SCp.ptr = (char *)page_address(cmd->SCp.buffer->page)+ cmd->SCp.buffer->offset; diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c index 10573c24a50b..eaf64c7e54e7 100644 --- a/drivers/scsi/esp.c +++ b/drivers/scsi/esp.c @@ -1397,7 +1397,7 @@ static void esp_get_dmabufs(struct esp *esp, struct scsi_cmnd *sp) sp->SCp.ptr = NULL; } } else { - sp->SCp.buffer = (struct scatterlist *) sp->buffer; + sp->SCp.buffer = (struct scatterlist *) sp->request_buffer; sp->SCp.buffers_residual = sbus_map_sg(esp->sdev, sp->SCp.buffer, sp->use_sg, @@ -1410,7 +1410,7 @@ static void esp_get_dmabufs(struct esp *esp, struct scsi_cmnd *sp) static void esp_release_dmabufs(struct esp *esp, struct scsi_cmnd *sp) { if (sp->use_sg) { - sbus_unmap_sg(esp->sdev, sp->buffer, sp->use_sg, + sbus_unmap_sg(esp->sdev, sp->request_buffer, sp->use_sg, sp->sc_data_direction); } else if (sp->request_bufflen) { sbus_unmap_single(esp->sdev, diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c index 3fd8a96f2af3..bfac4441d89f 100644 --- a/drivers/scsi/jazz_esp.c +++ b/drivers/scsi/jazz_esp.c @@ -257,7 +257,7 @@ static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp) static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp) { int sz = sp->use_sg - 1; - struct scatterlist *sg = (struct scatterlist *)sp->buffer; + struct scatterlist *sg = (struct scatterlist *)sp->request_buffer; while(sz >= 0) { vdma_free(sg[sz].dma_address); diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c index 93edaa8696cf..89ef34df5a1d 100644 --- a/drivers/scsi/mac53c94.c +++ b/drivers/scsi/mac53c94.c @@ -378,7 +378,7 @@ static void set_dma_cmds(struct fsc_state *state, struct scsi_cmnd *cmd) int nseg; total = 0; - scl = (struct scatterlist *) cmd->buffer; + scl = (struct scatterlist *) cmd->request_buffer; nseg = pci_map_sg(state->pdev, scl, cmd->use_sg, cmd->sc_data_direction); for (i = 0; i < nseg; ++i) { diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c index c88717727be8..5572981a9f92 100644 --- a/drivers/scsi/mesh.c +++ b/drivers/scsi/mesh.c @@ -1268,7 +1268,7 @@ static void set_dma_cmds(struct mesh_state *ms, struct scsi_cmnd *cmd) if (cmd->use_sg > 0) { int nseg; total = 0; - scl = (struct scatterlist *) cmd->buffer; + scl = (struct scatterlist *) cmd->request_buffer; off = ms->data_ptr; nseg = pci_map_sg(ms->pdev, scl, cmd->use_sg, cmd->sc_data_direction); diff --git a/drivers/scsi/pluto.c b/drivers/scsi/pluto.c index 7abf64d1bfc9..0bd9c60e6455 100644 --- a/drivers/scsi/pluto.c +++ b/drivers/scsi/pluto.c @@ -169,8 +169,6 @@ int __init pluto_detect(struct scsi_host_template *tpnt) SCpnt->request->rq_status = RQ_SCSI_BUSY; SCpnt->done = pluto_detect_done; - SCpnt->bufflen = 256; - SCpnt->buffer = fcs[i].inquiry; SCpnt->request_bufflen = 256; SCpnt->request_buffer = fcs[i].inquiry; PLD(("set up %d %08lx\n", i, (long)SCpnt)) diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index 69e0551a81d2..5b2f0741a55b 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -874,7 +874,7 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd, if (Cmnd->use_sg) { int sg_count; - sg = (struct scatterlist *) Cmnd->buffer; + sg = (struct scatterlist *) Cmnd->request_buffer; sg_count = sbus_map_sg(qpti->sdev, sg, Cmnd->use_sg, Cmnd->sc_data_direction); ds = cmd->dataseg; @@ -1278,7 +1278,7 @@ static struct scsi_cmnd *qlogicpti_intr_handler(struct qlogicpti *qpti) if (Cmnd->use_sg) { sbus_unmap_sg(qpti->sdev, - (struct scatterlist *)Cmnd->buffer, + (struct scatterlist *)Cmnd->request_buffer, Cmnd->use_sg, Cmnd->sc_data_direction); } else { diff --git a/drivers/scsi/seagate.c b/drivers/scsi/seagate.c index 3f312a84c6a7..2679ea8bff1a 100644 --- a/drivers/scsi/seagate.c +++ b/drivers/scsi/seagate.c @@ -1002,7 +1002,7 @@ connect_loop: } #endif - buffer = (struct scatterlist *) SCint->buffer; + buffer = (struct scatterlist *) SCint->request_buffer; len = buffer->length; data = page_address(buffer->page) + buffer->offset; } else { diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c index 2ebe0d663899..2f8073b73bf3 100644 --- a/drivers/scsi/sun3_NCR5380.c +++ b/drivers/scsi/sun3_NCR5380.c @@ -517,7 +517,7 @@ static __inline__ void initialize_SCp(Scsi_Cmnd *cmd) */ if (cmd->use_sg) { - cmd->SCp.buffer = (struct scatterlist *) cmd->buffer; + cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer; cmd->SCp.buffers_residual = cmd->use_sg - 1; cmd->SCp.ptr = (char *) SGADDR(cmd->SCp.buffer); cmd->SCp.this_residual = cmd->SCp.buffer->length; diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c index 1f328cae5c05..6b60536ac92b 100644 --- a/drivers/scsi/sun3x_esp.c +++ b/drivers/scsi/sun3x_esp.c @@ -347,7 +347,7 @@ static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp) static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp) { int sz = sp->use_sg - 1; - struct scatterlist *sg = (struct scatterlist *)sp->buffer; + struct scatterlist *sg = (struct scatterlist *)sp->request_buffer; while(sz >= 0) { dvma_unmap((char *)sg[sz].dma_address); diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c index 680f38ab60d8..2083454db511 100644 --- a/drivers/scsi/wd33c93.c +++ b/drivers/scsi/wd33c93.c @@ -373,7 +373,7 @@ wd33c93_queuecommand(struct scsi_cmnd *cmd, */ if (cmd->use_sg) { - cmd->SCp.buffer = (struct scatterlist *) cmd->buffer; + cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer; cmd->SCp.buffers_residual = cmd->use_sg - 1; cmd->SCp.ptr = page_address(cmd->SCp.buffer->page) + cmd->SCp.buffer->offset; -- cgit v1.2.3 From d96715c1acb119cef4b2443ba9b3777b730139e6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 29 Jun 2006 01:58:28 +0900 Subject: [PATCH] ata_piix: add host_set private structure Add host_set private structure piix_host_priv. Currently the only field is ->map which used to be stored directly at host_set->private_data. This change allows more host_set private fields to be added. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 56 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 40 insertions(+), 16 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 94b1261a259d..bf41dd3a35d2 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -144,8 +144,13 @@ struct piix_map_db { const int map[][4]; }; +struct piix_host_priv { + const int *map; +}; + static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static void piix_host_stop(struct ata_host_set *host_set); static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); static void piix_pata_error_handler(struct ata_port *ap); @@ -254,7 +259,7 @@ static const struct ata_port_operations piix_pata_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, - .host_stop = ata_host_stop, + .host_stop = piix_host_stop, }; static const struct ata_port_operations piix_sata_ops = { @@ -284,10 +289,10 @@ static const struct ata_port_operations piix_sata_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, - .host_stop = ata_host_stop, + .host_stop = piix_host_stop, }; -static struct piix_map_db ich5_map_db = { +static const struct piix_map_db ich5_map_db = { .mask = 0x7, .map = { /* PM PS SM SS MAP */ @@ -302,7 +307,7 @@ static struct piix_map_db ich5_map_db = { }, }; -static struct piix_map_db ich6_map_db = { +static const struct piix_map_db ich6_map_db = { .mask = 0x3, .map = { /* PM PS SM SS MAP */ @@ -313,7 +318,7 @@ static struct piix_map_db ich6_map_db = { }, }; -static struct piix_map_db ich6m_map_db = { +static const struct piix_map_db ich6m_map_db = { .mask = 0x3, .map = { /* PM PS SM SS MAP */ @@ -324,6 +329,14 @@ static struct piix_map_db ich6m_map_db = { }, }; +static const struct piix_map_db *piix_map_db_table[] = { + [ich5_sata] = &ich5_map_db, + [esb_sata] = &ich5_map_db, + [ich6_sata] = &ich6_map_db, + [ich6_sata_ahci] = &ich6_map_db, + [ich6m_sata_ahci] = &ich6m_map_db, +}; + static struct ata_port_info piix_port_info[] = { /* piix4_pata */ { @@ -362,7 +375,6 @@ static struct ata_port_info piix_port_info[] = { .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, - .private_data = &ich5_map_db, }, /* i6300esb_sata */ @@ -374,7 +386,6 @@ static struct ata_port_info piix_port_info[] = { .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, - .private_data = &ich5_map_db, }, /* ich6_sata */ @@ -386,7 +397,6 @@ static struct ata_port_info piix_port_info[] = { .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, - .private_data = &ich6_map_db, }, /* ich6_sata_ahci */ @@ -399,7 +409,6 @@ static struct ata_port_info piix_port_info[] = { .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, - .private_data = &ich6_map_db, }, /* ich6m_sata_ahci */ @@ -412,7 +421,6 @@ static struct ata_port_info piix_port_info[] = { .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, - .private_data = &ich6m_map_db, }, }; @@ -508,7 +516,8 @@ static void piix_pata_error_handler(struct ata_port *ap) static int piix_sata_prereset(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - const unsigned int *map = ap->host_set->private_data; + struct piix_host_priv *hpriv = ap->host_set->private_data; + const unsigned int *map = hpriv->map; int base = 2 * ap->hard_port_no; unsigned int present_mask = 0; int port, i; @@ -762,9 +771,10 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) } static void __devinit piix_init_sata_map(struct pci_dev *pdev, - struct ata_port_info *pinfo) + struct ata_port_info *pinfo, + const struct piix_map_db *map_db) { - struct piix_map_db *map_db = pinfo[0].private_data; + struct piix_host_priv *hpriv = pinfo[0].private_data; const unsigned int *map; int i, invalid_map = 0; u8 map_value; @@ -805,8 +815,7 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, dev_printk(KERN_ERR, &pdev->dev, "invalid MAP value %u\n", map_value); - pinfo[0].private_data = (void *)map; - pinfo[1].private_data = (void *)map; + hpriv->map = map; } /** @@ -829,6 +838,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static int printed_version; struct ata_port_info port_info[2]; struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] }; + struct piix_host_priv *hpriv; unsigned long host_flags; if (!printed_version++) @@ -839,8 +849,14 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (!in_module_init) return -ENODEV; + hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + port_info[0] = piix_port_info[ent->driver_data]; port_info[1] = piix_port_info[ent->driver_data]; + port_info[0].private_data = hpriv; + port_info[1].private_data = hpriv; host_flags = port_info[0].host_flags; @@ -856,7 +872,8 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) /* Initialize SATA map */ if (host_flags & ATA_FLAG_SATA) - piix_init_sata_map(pdev, port_info); + piix_init_sata_map(pdev, port_info, + piix_map_db_table[ent->driver_data]); /* On ICH5, some BIOSen disable the interrupt using the * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. @@ -879,6 +896,13 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return ata_pci_init_one(pdev, ppinfo, 2); } +static void piix_host_stop(struct ata_host_set *host_set) +{ + if (host_set->next == NULL) + kfree(host_set->private_data); + ata_host_stop(host_set); +} + static int __init piix_init(void) { int rc; -- cgit v1.2.3 From ea35d29e2fa8b3d766a2ce8fbcce599dce8d2734 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 11 Jul 2006 11:48:50 -0400 Subject: [libata] ata_piix: Consolidate PCS register writing Prior to this patch, the driver would do this for each port: read 8-bit PCS write 8-bit PCS read 8-bit PCS write 8-bit PCS In the field, flaky behavior has been observed related to this register. In particular, these overzealous register writes can cause misdetection problems. Update to do the following once (not once per port) at boot: read 16-bit PCS if needs changing, write 16-bit PCS And thereafter, we only perform a 'read 16-bit PCS' per port. This should eliminate all PCS writes in many cases, and be more friendly in the cases where we do need to enable ports. Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 53 ++++++++++++++++++++++++++----------------------- 1 file changed, 28 insertions(+), 25 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index bf41dd3a35d2..18b3542236d2 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -141,6 +141,7 @@ enum { struct piix_map_db { const u32 mask; + const u32 port_enable; const int map[][4]; }; @@ -294,6 +295,7 @@ static const struct ata_port_operations piix_sata_ops = { static const struct piix_map_db ich5_map_db = { .mask = 0x7, + .port_enable = 0x3, .map = { /* PM PS SM SS MAP */ { P0, NA, P1, NA }, /* 000b */ @@ -309,6 +311,7 @@ static const struct piix_map_db ich5_map_db = { static const struct piix_map_db ich6_map_db = { .mask = 0x3, + .port_enable = 0xf, .map = { /* PM PS SM SS MAP */ { P0, P2, P1, P3 }, /* 00b */ @@ -320,6 +323,7 @@ static const struct piix_map_db ich6_map_db = { static const struct piix_map_db ich6m_map_db = { .mask = 0x3, + .port_enable = 0x5, .map = { /* PM PS SM SS MAP */ { P0, P2, RV, RV }, /* 00b */ @@ -519,44 +523,25 @@ static int piix_sata_prereset(struct ata_port *ap) struct piix_host_priv *hpriv = ap->host_set->private_data; const unsigned int *map = hpriv->map; int base = 2 * ap->hard_port_no; - unsigned int present_mask = 0; + unsigned int present = 0; int port, i; - u8 pcs; + u16 pcs; - pci_read_config_byte(pdev, ICH5_PCS, &pcs); + pci_read_config_word(pdev, ICH5_PCS, &pcs); DPRINTK("ata%u: ENTER, pcs=0x%x base=%d\n", ap->id, pcs, base); - /* enable all ports on this ap and wait for them to settle */ - for (i = 0; i < 2; i++) { - port = map[base + i]; - if (port >= 0) - pcs |= 1 << port; - } - - pci_write_config_byte(pdev, ICH5_PCS, pcs); - msleep(100); - - /* let's see which devices are present */ - pci_read_config_byte(pdev, ICH5_PCS, &pcs); - for (i = 0; i < 2; i++) { port = map[base + i]; if (port < 0) continue; if (ap->flags & PIIX_FLAG_IGNORE_PCS || pcs & 1 << (4 + port)) - present_mask |= 1 << i; - else - pcs &= ~(1 << port); + present = 1; } - /* disable offline ports on non-AHCI controllers */ - if (!(ap->flags & PIIX_FLAG_AHCI)) - pci_write_config_byte(pdev, ICH5_PCS, pcs); - DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n", ap->id, pcs, present_mask); - if (!present_mask) { + if (!present) { ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; return 0; @@ -770,6 +755,22 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) return no_piix_dma; } +static void __devinit piix_init_pcs(struct pci_dev *pdev, + const struct piix_map_db *map_db) +{ + u16 pcs, new_pcs; + + pci_read_config_word(pdev, ICH5_PCS, &pcs); + + new_pcs = pcs | map_db->port_enable; + + if (new_pcs != pcs) { + DPRINTK("updating PCS from 0x%x to 0x%x\n", pcs, new_pcs); + pci_write_config_word(pdev, ICH5_PCS, new_pcs); + msleep(150); + } +} + static void __devinit piix_init_sata_map(struct pci_dev *pdev, struct ata_port_info *pinfo, const struct piix_map_db *map_db) @@ -871,9 +872,11 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) } /* Initialize SATA map */ - if (host_flags & ATA_FLAG_SATA) + if (host_flags & ATA_FLAG_SATA) { piix_init_sata_map(pdev, port_info, piix_map_db_table[ent->driver_data]); + piix_init_pcs(pdev, piix_map_db_table[ent->driver_data]); + } /* On ICH5, some BIOSen disable the interrupt using the * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. -- cgit v1.2.3 From 08f12edc335d24a89ba2f50b0a5b9d12295ce198 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 11 Jul 2006 11:57:44 -0400 Subject: [libata] ata_piix: attempt to fix ICH8 support Take into account the fact that ICH8 changed the register layout of the MAP and PCS register bits. Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 42 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 38 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 18b3542236d2..a960bb71c545 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -126,6 +126,7 @@ enum { ich6_sata = 4, ich6_sata_ahci = 5, ich6m_sata_ahci = 6, + ich8_sata_ahci = 7, /* constants for mapping table */ P0 = 0, /* port 0 */ @@ -142,11 +143,13 @@ enum { struct piix_map_db { const u32 mask; const u32 port_enable; + const int present_shift; const int map[][4]; }; struct piix_host_priv { const int *map; + const struct piix_map_db *map_db; }; static int piix_init_one (struct pci_dev *pdev, @@ -192,11 +195,11 @@ static const struct pci_device_id piix_pci_tbl[] = { /* Enterprise Southbridge 2 (where's the datasheet?) */ { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, /* SATA Controller 1 IDE (ICH8, no datasheet yet) */ - { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, /* SATA Controller 2 IDE (ICH8, ditto) */ - { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, /* Mobile SATA Controller IDE (ICH8M, ditto) */ - { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, + { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, { } /* terminate list */ }; @@ -296,6 +299,7 @@ static const struct ata_port_operations piix_sata_ops = { static const struct piix_map_db ich5_map_db = { .mask = 0x7, .port_enable = 0x3, + .present_shift = 4, .map = { /* PM PS SM SS MAP */ { P0, NA, P1, NA }, /* 000b */ @@ -312,6 +316,7 @@ static const struct piix_map_db ich5_map_db = { static const struct piix_map_db ich6_map_db = { .mask = 0x3, .port_enable = 0xf, + .present_shift = 4, .map = { /* PM PS SM SS MAP */ { P0, P2, P1, P3 }, /* 00b */ @@ -324,6 +329,7 @@ static const struct piix_map_db ich6_map_db = { static const struct piix_map_db ich6m_map_db = { .mask = 0x3, .port_enable = 0x5, + .present_shift = 4, .map = { /* PM PS SM SS MAP */ { P0, P2, RV, RV }, /* 00b */ @@ -333,12 +339,26 @@ static const struct piix_map_db ich6m_map_db = { }, }; +static const struct piix_map_db ich8_map_db = { + .mask = 0x3, + .port_enable = 0x3, + .present_shift = 8, + .map = { + /* PM PS SM SS MAP */ + { P0, RV, P1, RV }, /* 00b (hardwired) */ + { RV, RV, RV, RV }, + { RV, RV, RV, RV }, /* 10b (never) */ + { RV, RV, RV, RV }, + }, +}; + static const struct piix_map_db *piix_map_db_table[] = { [ich5_sata] = &ich5_map_db, [esb_sata] = &ich5_map_db, [ich6_sata] = &ich6_map_db, [ich6_sata_ahci] = &ich6_map_db, [ich6m_sata_ahci] = &ich6m_map_db, + [ich8_sata_ahci] = &ich8_map_db, }; static struct ata_port_info piix_port_info[] = { @@ -426,6 +446,18 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, }, + + /* ich8_sata_ahci */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, }; static struct pci_bits piix_enable_bits[] = { @@ -534,7 +566,8 @@ static int piix_sata_prereset(struct ata_port *ap) port = map[base + i]; if (port < 0) continue; - if (ap->flags & PIIX_FLAG_IGNORE_PCS || pcs & 1 << (4 + port)) + if ((ap->flags & PIIX_FLAG_IGNORE_PCS) || + (pcs & 1 << (hpriv->map_db->present_shift + port))) present = 1; } @@ -817,6 +850,7 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, "invalid MAP value %u\n", map_value); hpriv->map = map; + hpriv->map_db = map_db; } /** -- cgit v1.2.3 From 73291a1cb68bb62be62a927a9d67fe417b3cfe35 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 11 Jul 2006 13:11:17 -0400 Subject: [libata] ata_piix: minor cleanups noticed in prior patch run * delete unused PIIX_FLAG_COMBINED* * port_enable should be u16 rather than u32 Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index a960bb71c545..474965a8c68a 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -105,9 +105,6 @@ enum { PIIX_FLAG_SCR = (1 << 26), /* SCR available */ PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */ PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ - PIIX_FLAG_COMBINED = (1 << 29), /* combined mode possible */ - /* ICH6/7 use different scheme for map value */ - PIIX_FLAG_COMBINED_ICH6 = PIIX_FLAG_COMBINED | (1 << 30), /* combined mode. if set, PATA is channel 0. * if clear, PATA is channel 1. @@ -142,7 +139,7 @@ enum { struct piix_map_db { const u32 mask; - const u32 port_enable; + const u16 port_enable; const int present_shift; const int map[][4]; }; @@ -393,8 +390,7 @@ static struct ata_port_info piix_port_info[] = { /* ich5_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED | - PIIX_FLAG_CHECKINTR, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ @@ -404,7 +400,7 @@ static struct ata_port_info piix_port_info[] = { /* i6300esb_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED | + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -415,7 +411,7 @@ static struct ata_port_info piix_port_info[] = { /* ich6_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -426,7 +422,7 @@ static struct ata_port_info piix_port_info[] = { /* ich6_sata_ahci */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ @@ -438,7 +434,7 @@ static struct ata_port_info piix_port_info[] = { /* ich6m_sata_ahci */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ @@ -450,7 +446,7 @@ static struct ata_port_info piix_port_info[] = { /* ich8_sata_ahci */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ -- cgit v1.2.3 From f5beec49636bf8d5a34065c8ab030cd4ea84516f Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 11 Jul 2006 15:28:12 -0400 Subject: [libata] ata_piix: correct 'invalid MAP value' typo-caused error Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 474965a8c68a..19745a31072b 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -342,7 +342,7 @@ static const struct piix_map_db ich8_map_db = { .present_shift = 8, .map = { /* PM PS SM SS MAP */ - { P0, RV, P1, RV }, /* 00b (hardwired) */ + { P0, NA, P1, NA }, /* 00b (hardwired) */ { RV, RV, RV, RV }, { RV, RV, RV, RV }, /* 10b (never) */ { RV, RV, RV, RV }, -- cgit v1.2.3 From 4528e4da79675b4995e085046b8ffbe0415c3261 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 8 Jul 2006 20:17:26 +0900 Subject: [PATCH] libata: fix autopsy ehc->i.action and ehc->i.dev handling Commit 0662c58b3265f52f708a6d59476bc7862b01f9c0 updated ata_eh_autopsy() to OR determined action to ehc->i.action to preserve action mask set directly into ehc->i.action by nested functions. This broke action mask clearing on SENSE_VALID case causing revalidation and EH complete message on successful ATAPI CC. This patch removes two local variables - action and failed_dev - which cache ehc->i.action and ehc->i.dev respectively, and make the function directly modify ehc->i.* fields to remove aliasing issues. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-eh.c | 29 ++++++++++++----------------- 1 file changed, 12 insertions(+), 17 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 4b6aa30f4d68..36a801c83325 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1276,8 +1276,6 @@ static int ata_eh_speed_down(struct ata_device *dev, int is_io, static void ata_eh_autopsy(struct ata_port *ap) { struct ata_eh_context *ehc = &ap->eh_context; - unsigned int action = ehc->i.action; - struct ata_device *failed_dev = NULL; unsigned int all_err_mask = 0; int tag, is_io = 0; u32 serror; @@ -1294,7 +1292,7 @@ static void ata_eh_autopsy(struct ata_port *ap) ehc->i.serror |= serror; ata_eh_analyze_serror(ap); } else if (rc != -EOPNOTSUPP) - action |= ATA_EH_HARDRESET; + ehc->i.action |= ATA_EH_HARDRESET; /* analyze NCQ failure */ ata_eh_analyze_ncq_error(ap); @@ -1315,7 +1313,7 @@ static void ata_eh_autopsy(struct ata_port *ap) qc->err_mask |= ehc->i.err_mask; /* analyze TF */ - action |= ata_eh_analyze_tf(qc, &qc->result_tf); + ehc->i.action |= ata_eh_analyze_tf(qc, &qc->result_tf); /* DEV errors are probably spurious in case of ATA_BUS error */ if (qc->err_mask & AC_ERR_ATA_BUS) @@ -1329,11 +1327,11 @@ static void ata_eh_autopsy(struct ata_port *ap) /* SENSE_VALID trumps dev/unknown error and revalidation */ if (qc->flags & ATA_QCFLAG_SENSE_VALID) { qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER); - action &= ~ATA_EH_REVALIDATE; + ehc->i.action &= ~ATA_EH_REVALIDATE; } /* accumulate error info */ - failed_dev = qc->dev; + ehc->i.dev = qc->dev; all_err_mask |= qc->err_mask; if (qc->flags & ATA_QCFLAG_IO) is_io = 1; @@ -1342,25 +1340,22 @@ static void ata_eh_autopsy(struct ata_port *ap) /* enforce default EH actions */ if (ap->pflags & ATA_PFLAG_FROZEN || all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) - action |= ATA_EH_SOFTRESET; + ehc->i.action |= ATA_EH_SOFTRESET; else if (all_err_mask) - action |= ATA_EH_REVALIDATE; + ehc->i.action |= ATA_EH_REVALIDATE; /* if we have offending qcs and the associated failed device */ - if (failed_dev) { + if (ehc->i.dev) { /* speed down */ - action |= ata_eh_speed_down(failed_dev, is_io, all_err_mask); + ehc->i.action |= ata_eh_speed_down(ehc->i.dev, is_io, + all_err_mask); /* perform per-dev EH action only on the offending device */ - ehc->i.dev_action[failed_dev->devno] |= - action & ATA_EH_PERDEV_MASK; - action &= ~ATA_EH_PERDEV_MASK; + ehc->i.dev_action[ehc->i.dev->devno] |= + ehc->i.action & ATA_EH_PERDEV_MASK; + ehc->i.action &= ~ATA_EH_PERDEV_MASK; } - /* record autopsy result */ - ehc->i.dev = failed_dev; - ehc->i.action |= action; - DPRINTK("EXIT\n"); } -- cgit v1.2.3 From 7c8c2cff81b2b7f6dd3f9fd7b77033c1be5d7920 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 Jul 2006 23:18:23 +0900 Subject: [PATCH] libata: fix eh_skip_recovery condition * (ata_dev_absent() || ata_dev_ready()) test doesn't indicate SUSPENDED state properly. Fix it. * Link resuming resets shouldn't be skipped. Don't skip recovery on EHI_RESUME_LINK. This doesn't matter for host ports as EHI_RESUME always coincides with EHI_HOTPLUGGED which makes attached disabled devices vacant. However, PMP reset causes non-hotplug link-resuming resets which shouldn't be skipped. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-eh.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 36a801c83325..1dcb2c13ffa9 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1843,15 +1843,16 @@ static int ata_eh_skip_recovery(struct ata_port *ap) for (i = 0; i < ata_port_max_devices(ap); i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_absent(dev) || ata_dev_ready(dev)) + if (!(dev->flags & ATA_DFLAG_SUSPENDED)) break; } if (i == ata_port_max_devices(ap)) return 1; - /* always thaw frozen port and recover failed devices */ - if (ap->pflags & ATA_PFLAG_FROZEN || ata_port_nr_enabled(ap)) + /* thaw frozen port, resume link and recover failed devices */ + if ((ap->pflags & ATA_PFLAG_FROZEN) || + (ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_port_nr_enabled(ap)) return 0; /* skip if class codes for all vacant slots are ATA_DEV_NONE */ -- cgit v1.2.3 From 13abf50df209008b5d44075bafeeab42ace56aa6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 Jul 2006 23:18:46 +0900 Subject: [PATCH] libata: improve EH action and EHI flag handling Update ata_eh_about_to_do() and ata_eh_done() to improve EH action and EHI flag handling. * There are two types of EHI flags - one which expires on successful EH and the other which expires on a successful reset. Make this distinction clear. * Unlike other EH actions, reset actions are represented by two EH action masks and a EHI modifier. Implement correct about_to_do/done semantics for resets. That is, prior to reset, related EH info is sucked in from ehi and cleared, and after reset is complete, related EH info in ehc is cleared. These changes improve consistency and remove unnecessary EH actions caused by stale EH action masks and EHI flags. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-eh.c | 33 ++++++++++++++++++++++++++++----- include/linux/libata.h | 4 +++- 2 files changed, 31 insertions(+), 6 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 1dcb2c13ffa9..29f59345305d 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -764,12 +764,27 @@ static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, unsigned int action) { unsigned long flags; + struct ata_eh_info *ehi = &ap->eh_info; + struct ata_eh_context *ehc = &ap->eh_context; spin_lock_irqsave(ap->lock, flags); - ata_eh_clear_action(dev, &ap->eh_info, action); + /* Reset is represented by combination of actions and EHI + * flags. Suck in all related bits before clearing eh_info to + * avoid losing requested action. + */ + if (action & ATA_EH_RESET_MASK) { + ehc->i.action |= ehi->action & ATA_EH_RESET_MASK; + ehc->i.flags |= ehi->flags & ATA_EHI_RESET_MODIFIER_MASK; + + /* make sure all reset actions are cleared & clear EHI flags */ + action |= ATA_EH_RESET_MASK; + ehi->flags &= ~ATA_EHI_RESET_MODIFIER_MASK; + } + + ata_eh_clear_action(dev, ehi, action); - if (!(ap->eh_context.i.flags & ATA_EHI_QUIET)) + if (!(ehc->i.flags & ATA_EHI_QUIET)) ap->pflags |= ATA_PFLAG_RECOVERED; spin_unlock_irqrestore(ap->lock, flags); @@ -790,6 +805,12 @@ static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, static void ata_eh_done(struct ata_port *ap, struct ata_device *dev, unsigned int action) { + /* if reset is complete, clear all reset actions & reset modifier */ + if (action & ATA_EH_RESET_MASK) { + action |= ATA_EH_RESET_MASK; + ap->eh_context.i.flags &= ~ATA_EHI_RESET_MODIFIER_MASK; + } + ata_eh_clear_action(dev, &ap->eh_context.i, action); } @@ -1478,6 +1499,9 @@ static int ata_eh_reset(struct ata_port *ap, int classify, ata_reset_fn_t reset; int i, did_followup_srst, rc; + /* about to reset */ + ata_eh_about_to_do(ap, NULL, ehc->i.action & ATA_EH_RESET_MASK); + /* Determine which reset to use and record in ehc->i.action. * prereset() may examine and modify it. */ @@ -1526,8 +1550,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, ata_port_printk(ap, KERN_INFO, "%s resetting port\n", reset == softreset ? "soft" : "hard"); - /* reset */ - ata_eh_about_to_do(ap, NULL, ATA_EH_RESET_MASK); + /* mark that this EH session started with reset */ ehc->i.flags |= ATA_EHI_DID_RESET; rc = ata_do_reset(ap, reset, classes); @@ -1590,7 +1613,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, postreset(ap, classes); /* reset successful, schedule revalidation */ - ata_eh_done(ap, NULL, ATA_EH_RESET_MASK); + ata_eh_done(ap, NULL, ehc->i.action & ATA_EH_RESET_MASK); ehc->i.action |= ATA_EH_REVALIDATE; } diff --git a/include/linux/libata.h b/include/linux/libata.h index 6cc497a2b6da..66c3100c2b94 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -265,12 +265,14 @@ enum { /* ata_eh_info->flags */ ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */ - ATA_EHI_RESUME_LINK = (1 << 1), /* need to resume link */ + ATA_EHI_RESUME_LINK = (1 << 1), /* resume link (reset modifier) */ ATA_EHI_NO_AUTOPSY = (1 << 2), /* no autopsy */ ATA_EHI_QUIET = (1 << 3), /* be quiet */ ATA_EHI_DID_RESET = (1 << 16), /* already reset this port */ + ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK, + /* max repeat if error condition is still set after ->error_handler */ ATA_EH_MAX_REPEAT = 5, -- cgit v1.2.3 From 8419dc8a34d765f2ff1aa4051084d54cfeff09cf Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 24 Jul 2006 03:37:52 -0400 Subject: [libata] sata_promise: comment out duplicate PCI ID This is just the for-RC fix. A 'TODO' command is added, describing what's needed for the more-complete fix. --- drivers/scsi/sata_promise.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 64631bd38952..4776f4e55839 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -269,8 +269,15 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = { { PCI_VENDOR_ID_PROMISE, 0x6629, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20619 }, +/* TODO: remove all associated board_20771 code, as it completely + * duplicates board_2037x code, unless reason for separation can be + * divined. + */ +#if 0 { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20771 }, +#endif + { } /* terminate list */ }; -- cgit v1.2.3 From 6bc063d414a815937fc81449fa9ffe8d3a4cdf22 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 24 Jul 2006 22:47:14 -0700 Subject: [SCSI] esp: Fix build. The data_cmd[] member got deleted, so do not use it any more. Scsi commands do not have their ->cmd[] overwritten temporary to probe for status after an error before retrying. Signed-off-by: David S. Miller --- drivers/scsi/esp.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c index eaf64c7e54e7..98bd22714d0d 100644 --- a/drivers/scsi/esp.c +++ b/drivers/scsi/esp.c @@ -2754,18 +2754,15 @@ static int esp_do_data_finale(struct esp *esp) */ static int esp_should_clear_sync(struct scsi_cmnd *sp) { - u8 cmd1 = sp->cmnd[0]; - u8 cmd2 = sp->data_cmnd[0]; + u8 cmd = sp->cmnd[0]; /* These cases are for spinning up a disk and * waiting for that spinup to complete. */ - if (cmd1 == START_STOP || - cmd2 == START_STOP) + if (cmd == START_STOP) return 0; - if (cmd1 == TEST_UNIT_READY || - cmd2 == TEST_UNIT_READY) + if (cmd == TEST_UNIT_READY) return 0; /* One more special case for SCSI tape drives, @@ -2773,8 +2770,7 @@ static int esp_should_clear_sync(struct scsi_cmnd *sp) * completion of a rewind or tape load operation. */ if (sp->device->type == TYPE_TAPE) { - if (cmd1 == MODE_SENSE || - cmd2 == MODE_SENSE) + if (cmd == MODE_SENSE) return 0; } -- cgit v1.2.3 From 64821324ca49f24be1a66f2f432108f96a24e596 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 26 Jul 2006 09:53:23 +0200 Subject: [PATCH] fix compile regression for a few scsi drivers This fixes three drivers to compile again after my patch that removes the data_cmnd member from struct scsi_cmnd. The fas216 change is trivial, it should have been using ->cmnd all the time. NCR53C9 (which seem to be mostly duplicate driver with esp.c!) is doing something odd, it should only have looked at ->cmnd before not the saved copy that is kept for the error handlers sake. Note that it really should deal with the sync setting themselves but use the generic domain validation code that get this right - but that's for later let's push this simple compile fix for now. And sorry for the late fix for this, I have been busy with OLS and associated activities last week. Signed-off-by: Christoph Hellwig Signed-off-by: Linus Torvalds --- drivers/scsi/NCR53C9x.c | 16 +++++----------- drivers/scsi/arm/fas216.c | 2 +- 2 files changed, 6 insertions(+), 12 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/NCR53C9x.c b/drivers/scsi/NCR53C9x.c index 085db4826e0e..bdc6bb262bce 100644 --- a/drivers/scsi/NCR53C9x.c +++ b/drivers/scsi/NCR53C9x.c @@ -2152,29 +2152,23 @@ static int esp_do_data_finale(struct NCR_ESP *esp, */ static int esp_should_clear_sync(Scsi_Cmnd *sp) { - unchar cmd1 = sp->cmnd[0]; - unchar cmd2 = sp->data_cmnd[0]; + unchar cmd = sp->cmnd[0]; /* These cases are for spinning up a disk and * waiting for that spinup to complete. */ - if(cmd1 == START_STOP || - cmd2 == START_STOP) + if(cmd == START_STOP) return 0; - if(cmd1 == TEST_UNIT_READY || - cmd2 == TEST_UNIT_READY) + if(cmd == TEST_UNIT_READY) return 0; /* One more special case for SCSI tape drives, * this is what is used to probe the device for * completion of a rewind or tape load operation. */ - if(sp->device->type == TYPE_TAPE) { - if(cmd1 == MODE_SENSE || - cmd2 == MODE_SENSE) - return 0; - } + if(sp->device->type == TYPE_TAPE && cmd == MODE_SENSE) + return 0; return 1; } diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index 3e1053f111dc..4cf7afc31cc7 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -2427,7 +2427,7 @@ int fas216_eh_abort(Scsi_Cmnd *SCpnt) info->stats.aborts += 1; printk(KERN_WARNING "scsi%d: abort command ", info->host->host_no); - __scsi_print_command(SCpnt->data_cmnd); + __scsi_print_command(SCpnt->cmnd); print_debug_list(); fas216_dumpstate(info); -- cgit v1.2.3 From a75ad3c27a6ad78c4306cac939938050dcde54f3 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 28 Jul 2006 09:04:09 +0200 Subject: [PATCH] scsi: kill overeager "not-ready" messages HAL and friends have a tendency to trigger this one all the time. It's not really interesting, so kill it. The vendor kernels all do anyways. Signed-off-by: Jens Axboe --- drivers/scsi/scsi_ioctl.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c index a89c4115cfba..32293f451669 100644 --- a/drivers/scsi/scsi_ioctl.c +++ b/drivers/scsi/scsi_ioctl.c @@ -110,11 +110,8 @@ static int ioctl_internal_command(struct scsi_device *sdev, char *cmd, sshdr.asc, sshdr.ascq); break; case NOT_READY: /* This happens if there is no disc in drive */ - if (sdev->removable && (cmd[0] != TEST_UNIT_READY)) { - printk(KERN_INFO "Device not ready. Make sure" - " there is a disc in the drive.\n"); + if (sdev->removable) break; - } case UNIT_ATTENTION: if (sdev->removable) { sdev->changed = 1; -- cgit v1.2.3