From 126534141b45d9d1b205fbe3f2321200074b76fd Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 20 Aug 2017 00:18:19 +0200 Subject: MIPS: lantiq: Add a GPHY driver which uses the RCU syscon-mfd Compared to the old xrx200_phy_fw driver the new version has multiple enhancements. The name of the firmware files does not have to be added to all .dts files anymore - one now configures the GPHY mode (FE or GE) instead. Each GPHY can now also boot separate firmware (thus mixing of GE and FE GPHYs is now possible). The new implementation is based on the RCU syscon-mfd and uses the reeset_controller framework instead of raw RCU register reads/writes. Signed-off-by: Martin Blumenstingl Signed-off-by: Hauke Mehrtens Reviewed-by: Andy Shevchenko Acked-by: Rob Herring Cc: john@phrozen.org Cc: p.zabel@pengutronix.de Cc: kishon@ti.com Cc: mark.rutland@arm.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-spi@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17128/ Signed-off-by: Ralf Baechle --- drivers/soc/lantiq/Makefile | 1 + drivers/soc/lantiq/gphy.c | 260 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 261 insertions(+) create mode 100644 drivers/soc/lantiq/gphy.c (limited to 'drivers/soc/lantiq') diff --git a/drivers/soc/lantiq/Makefile b/drivers/soc/lantiq/Makefile index 35aa86bd1023..be9e866d53e5 100644 --- a/drivers/soc/lantiq/Makefile +++ b/drivers/soc/lantiq/Makefile @@ -1 +1,2 @@ obj-y += fpi-bus.o +obj-$(CONFIG_XRX200_PHY_FW) += gphy.o diff --git a/drivers/soc/lantiq/gphy.c b/drivers/soc/lantiq/gphy.c new file mode 100644 index 000000000000..8d8659463b3e --- /dev/null +++ b/drivers/soc/lantiq/gphy.c @@ -0,0 +1,260 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin + * Copyright (C) 2016 Martin Blumenstingl + * Copyright (C) 2017 Hauke Mehrtens + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define XRX200_GPHY_FW_ALIGN (16 * 1024) + +struct xway_gphy_priv { + struct clk *gphy_clk_gate; + struct reset_control *gphy_reset; + struct reset_control *gphy_reset2; + struct notifier_block gphy_reboot_nb; + void __iomem *membase; + char *fw_name; +}; + +struct xway_gphy_match_data { + char *fe_firmware_name; + char *ge_firmware_name; +}; + +static const struct xway_gphy_match_data xrx200a1x_gphy_data = { + .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin", + .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin", +}; + +static const struct xway_gphy_match_data xrx200a2x_gphy_data = { + .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin", + .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin", +}; + +static const struct xway_gphy_match_data xrx300_gphy_data = { + .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin", + .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin", +}; + +static const struct of_device_id xway_gphy_match[] = { + { .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data }, + { .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data }, + { .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data }, + { .compatible = "lantiq,xrx330-gphy", .data = &xrx300_gphy_data }, + {}, +}; +MODULE_DEVICE_TABLE(of, xway_gphy_match); + +static struct xway_gphy_priv *to_xway_gphy_priv(struct notifier_block *nb) +{ + return container_of(nb, struct xway_gphy_priv, gphy_reboot_nb); +} + +static int xway_gphy_reboot_notify(struct notifier_block *reboot_nb, + unsigned long code, void *unused) +{ + struct xway_gphy_priv *priv = to_xway_gphy_priv(reboot_nb); + + if (priv) { + reset_control_assert(priv->gphy_reset); + reset_control_assert(priv->gphy_reset2); + } + + return NOTIFY_DONE; +} + +static int xway_gphy_load(struct device *dev, struct xway_gphy_priv *priv, + dma_addr_t *dev_addr) +{ + const struct firmware *fw; + void *fw_addr; + dma_addr_t dma_addr; + size_t size; + int ret; + + ret = request_firmware(&fw, priv->fw_name, dev); + if (ret) { + dev_err(dev, "failed to load firmware: %s, error: %i\n", + priv->fw_name, ret); + return ret; + } + + /* + * GPHY cores need the firmware code in a persistent and contiguous + * memory area with a 16 kB boundary aligned start address. + */ + size = fw->size + XRX200_GPHY_FW_ALIGN; + + fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL); + if (fw_addr) { + fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN); + *dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN); + memcpy(fw_addr, fw->data, fw->size); + } else { + dev_err(dev, "failed to alloc firmware memory\n"); + ret = -ENOMEM; + } + + release_firmware(fw); + + return ret; +} + +static int xway_gphy_of_probe(struct platform_device *pdev, + struct xway_gphy_priv *priv) +{ + struct device *dev = &pdev->dev; + const struct xway_gphy_match_data *gphy_fw_name_cfg; + u32 gphy_mode; + int ret; + struct resource *res_gphy; + + gphy_fw_name_cfg = of_device_get_match_data(dev); + + priv->gphy_clk_gate = devm_clk_get(dev, NULL); + if (IS_ERR(priv->gphy_clk_gate)) { + dev_err(dev, "Failed to lookup gate clock\n"); + return PTR_ERR(priv->gphy_clk_gate); + } + + res_gphy = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->membase = devm_ioremap_resource(dev, res_gphy); + if (IS_ERR(priv->membase)) + return PTR_ERR(priv->membase); + + priv->gphy_reset = devm_reset_control_get(dev, "gphy"); + if (IS_ERR(priv->gphy_reset)) { + if (PTR_ERR(priv->gphy_reset) != -EPROBE_DEFER) + dev_err(dev, "Failed to lookup gphy reset\n"); + return PTR_ERR(priv->gphy_reset); + } + + priv->gphy_reset2 = devm_reset_control_get_optional(dev, "gphy2"); + if (IS_ERR(priv->gphy_reset2)) + return PTR_ERR(priv->gphy_reset2); + + ret = device_property_read_u32(dev, "lantiq,gphy-mode", &gphy_mode); + /* Default to GE mode */ + if (ret) + gphy_mode = GPHY_MODE_GE; + + switch (gphy_mode) { + case GPHY_MODE_FE: + priv->fw_name = gphy_fw_name_cfg->fe_firmware_name; + break; + case GPHY_MODE_GE: + priv->fw_name = gphy_fw_name_cfg->ge_firmware_name; + break; + default: + dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode); + return -EINVAL; + } + + return 0; +} + +static int xway_gphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct xway_gphy_priv *priv; + dma_addr_t fw_addr = 0; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + ret = xway_gphy_of_probe(pdev, priv); + if (ret) + return ret; + + ret = clk_prepare_enable(priv->gphy_clk_gate); + if (ret) + return ret; + + ret = xway_gphy_load(dev, priv, &fw_addr); + if (ret) { + clk_disable_unprepare(priv->gphy_clk_gate); + return ret; + } + + reset_control_assert(priv->gphy_reset); + reset_control_assert(priv->gphy_reset2); + + iowrite32be(fw_addr, priv->membase); + + reset_control_deassert(priv->gphy_reset); + reset_control_deassert(priv->gphy_reset2); + + /* assert the gphy reset because it can hang after a reboot: */ + priv->gphy_reboot_nb.notifier_call = xway_gphy_reboot_notify; + priv->gphy_reboot_nb.priority = -1; + + ret = register_reboot_notifier(&priv->gphy_reboot_nb); + if (ret) + dev_warn(dev, "Failed to register reboot notifier\n"); + + platform_set_drvdata(pdev, priv); + + return ret; +} + +static int xway_gphy_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct xway_gphy_priv *priv = platform_get_drvdata(pdev); + int ret; + + reset_control_assert(priv->gphy_reset); + reset_control_assert(priv->gphy_reset2); + + iowrite32be(0, priv->membase); + + clk_disable_unprepare(priv->gphy_clk_gate); + + ret = unregister_reboot_notifier(&priv->gphy_reboot_nb); + if (ret) + dev_warn(dev, "Failed to unregister reboot notifier\n"); + + return 0; +} + +static struct platform_driver xway_gphy_driver = { + .probe = xway_gphy_probe, + .remove = xway_gphy_remove, + .driver = { + .name = "xway-rcu-gphy", + .of_match_table = xway_gphy_match, + }, +}; + +module_platform_driver(xway_gphy_driver); + +MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin"); +MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin"); +MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin"); +MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin"); +MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin"); +MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin"); +MODULE_AUTHOR("Martin Blumenstingl "); +MODULE_DESCRIPTION("Lantiq XWAY GPHY Firmware Loader"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3