From 5a9b1258170836151d7c0465523b7e869a2d21fb Mon Sep 17 00:00:00 2001 From: Michael Tretter Date: Thu, 21 Jan 2021 08:16:55 +0100 Subject: soc: xilinx: vcu: remove calculation of PLL configuration As the consumers are now responsible for setting the clock rate via clock framework, the clock rate is now calculated using round_rate and the driver does not need to calculate the clock rate beforehand. Remove the code that calculates the PLL configuration. Signed-off-by: Michael Tretter Acked-by: Michal Simek Link: https://lore.kernel.org/r/20210121071659.1226489-12-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd --- drivers/soc/xilinx/xlnx_vcu.c | 117 ------------------------------------------ 1 file changed, 117 deletions(-) (limited to 'drivers/soc/xilinx') diff --git a/drivers/soc/xilinx/xlnx_vcu.c b/drivers/soc/xilinx/xlnx_vcu.c index 7585b26ab51a..f858c269e779 100644 --- a/drivers/soc/xilinx/xlnx_vcu.c +++ b/drivers/soc/xilinx/xlnx_vcu.c @@ -59,10 +59,6 @@ #define MHZ 1000000 #define FVCO_MIN (1500U * MHZ) #define FVCO_MAX (3000U * MHZ) -#define DIVISOR_MIN 0 -#define DIVISOR_MAX 63 -#define FRAC 100 -#define LIMIT (10 * MHZ) /** * struct xvcu_device - Xilinx VCU init device structure @@ -482,111 +478,6 @@ static struct clk_hw *xvcu_register_pll(struct device *dev, return hw; } -/** - * xvcu_set_vcu_pll_info - Set the VCU PLL info - * @xvcu: Pointer to the xvcu_device structure - * - * Programming the VCU PLL based on the user configuration - * (ref clock freq, core clock freq, mcu clock freq). - * Core clock frequency has higher priority than mcu clock frequency - * Errors in following cases - * - When mcu or clock clock get from logicoreIP is 0 - * - When VCU PLL DIV related bits value other than 1 - * - When proper data not found for given data - * - When sis570_1 clocksource related operation failed - * - * Return: Returns status, either success or error+reason - */ -static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu) -{ - u32 refclk, coreclk, mcuclk, inte, deci; - u32 divisor_mcu, divisor_core, fvco; - u32 pll_clk; - u32 mod; - int i; - const struct xvcu_pll_cfg *found = NULL; - - regmap_read(xvcu->logicore_reg_ba, VCU_PLL_CLK, &inte); - regmap_read(xvcu->logicore_reg_ba, VCU_PLL_CLK_DEC, &deci); - regmap_read(xvcu->logicore_reg_ba, VCU_CORE_CLK, &coreclk); - coreclk *= MHZ; - regmap_read(xvcu->logicore_reg_ba, VCU_MCU_CLK, &mcuclk); - mcuclk *= MHZ; - if (!mcuclk || !coreclk) { - dev_err(xvcu->dev, "Invalid mcu and core clock data\n"); - return -EINVAL; - } - - refclk = (inte * MHZ) + (deci * (MHZ / FRAC)); - dev_dbg(xvcu->dev, "Ref clock from logicoreIP is %uHz\n", refclk); - dev_dbg(xvcu->dev, "Core clock from logicoreIP is %uHz\n", coreclk); - dev_dbg(xvcu->dev, "Mcu clock from logicoreIP is %uHz\n", mcuclk); - - for (i = ARRAY_SIZE(xvcu_pll_cfg) - 1; i >= 0; i--) { - const struct xvcu_pll_cfg *cfg = &xvcu_pll_cfg[i]; - - fvco = cfg->fbdiv * refclk; - if (fvco >= FVCO_MIN && fvco <= FVCO_MAX) { - pll_clk = fvco / VCU_PLL_DIV2; - if (fvco % VCU_PLL_DIV2 != 0) - pll_clk++; - mod = pll_clk % coreclk; - if (mod < LIMIT) { - divisor_core = pll_clk / coreclk; - } else if (coreclk - mod < LIMIT) { - divisor_core = pll_clk / coreclk; - divisor_core++; - } else { - continue; - } - if (divisor_core >= DIVISOR_MIN && - divisor_core <= DIVISOR_MAX) { - found = cfg; - divisor_mcu = pll_clk / mcuclk; - mod = pll_clk % mcuclk; - if (mcuclk - mod < LIMIT) - divisor_mcu++; - break; - } - } - } - - if (!found) { - dev_err(xvcu->dev, "Invalid clock combination.\n"); - return -EINVAL; - } - - coreclk = pll_clk / divisor_core; - mcuclk = pll_clk / divisor_mcu; - dev_dbg(xvcu->dev, "Actual Ref clock freq is %uHz\n", refclk); - dev_dbg(xvcu->dev, "Actual Core clock freq is %uHz\n", coreclk); - dev_dbg(xvcu->dev, "Actual Mcu clock freq is %uHz\n", mcuclk); - - return 0; -} - -/** - * xvcu_set_pll - PLL init sequence - * @xvcu: Pointer to the xvcu_device structure - * - * Call the api to set the PLL info and once that is done then - * init the PLL sequence to make the PLL stable. - * - * Return: Returns status, either success or error+reason - */ -static int xvcu_set_pll(struct xvcu_device *xvcu) -{ - int ret; - - ret = xvcu_set_vcu_pll_info(xvcu); - if (ret) { - dev_err(xvcu->dev, "failed to set pll info\n"); - return ret; - } - - return 0; -} - static struct clk_hw *xvcu_clk_hw_register_leaf(struct device *dev, const char *name, const struct clk_parent_data *parent_data, @@ -834,13 +725,6 @@ static int xvcu_probe(struct platform_device *pdev) */ regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE); - /* Do the PLL Settings based on the ref clk,core and mcu clk freq */ - ret = xvcu_set_pll(xvcu); - if (ret) { - dev_err(&pdev->dev, "Failed to set the pll\n"); - goto error_pll_ref; - } - ret = xvcu_register_clock_provider(xvcu); if (ret) { dev_err(&pdev->dev, "failed to register clock provider\n"); @@ -853,7 +737,6 @@ static int xvcu_probe(struct platform_device *pdev) error_clk_provider: xvcu_unregister_clock_provider(xvcu); -error_pll_ref: clk_disable_unprepare(xvcu->aclk); return ret; } -- cgit v1.2.3