From ce57d9e694d98e421e329fbac5d6f5dc5e9e101e Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 1 Apr 2011 12:06:48 +0200 Subject: ssb: trivial: use u8 for chip_rev (it's mask is 0xF) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ssb') diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c index 29884c00c4d5..7dca719fbcfb 100644 --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c @@ -307,7 +307,7 @@ int ssb_bus_scan(struct ssb_bus *bus, } else { if (bus->bustype == SSB_BUSTYPE_PCI) { bus->chip_id = pcidev_to_chipid(bus->host_pci); - pci_read_config_word(bus->host_pci, PCI_REVISION_ID, + pci_read_config_byte(bus->host_pci, PCI_REVISION_ID, &bus->chip_rev); bus->chip_package = 0; } else { -- cgit v1.2.3 From 6c74608bd479bbe02ce330f83df43c3f535ed200 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 1 Apr 2011 12:07:32 +0200 Subject: ssb: pci: trivial: drop useless pointer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/ssb') diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 0e8d35224614..e0cf29e57919 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -417,11 +417,9 @@ static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) void ssb_pcicore_init(struct ssb_pcicore *pc) { struct ssb_device *dev = pc->dev; - struct ssb_bus *bus; if (!dev) return; - bus = dev->bus; if (!ssb_device_is_enabled(dev)) ssb_device_enable(dev, 0); -- cgit v1.2.3 From 1b1c7acd9709e545399d1b6b89888f025911c0a2 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 1 Apr 2011 12:07:33 +0200 Subject: ssb: pci: fix mdio writes on newer cores (rev 10+) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) (limited to 'drivers/ssb') diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index e0cf29e57919..08fa6fdfc101 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -444,11 +444,35 @@ static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data) pcicore_write32(pc, 0x134, data); } +static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy) +{ + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + u32 v; + int i; + + v = (1 << 30); /* Start of Transaction */ + v |= (1 << 28); /* Write Transaction */ + v |= (1 << 17); /* Turnaround */ + v |= (0x1F << 18); + v |= (phy << 4); + pcicore_write32(pc, mdio_data, v); + + udelay(10); + for (i = 0; i < 200; i++) { + v = pcicore_read32(pc, mdio_control); + if (v & 0x100 /* Trans complete */) + break; + msleep(1); + } +} + static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, u8 address, u16 data) { const u16 mdio_control = 0x128; const u16 mdio_data = 0x12C; + int max_retries = 10; u32 v; int i; @@ -456,16 +480,22 @@ static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, v |= 0x2; /* MDIO Clock Divisor */ pcicore_write32(pc, mdio_control, v); + if (pc->dev->id.revision >= 10) { + max_retries = 200; + ssb_pcie_mdio_set_phy(pc, device); + } + v = (1 << 30); /* Start of Transaction */ v |= (1 << 28); /* Write Transaction */ v |= (1 << 17); /* Turnaround */ - v |= (u32)device << 22; + if (pc->dev->id.revision < 10) + v |= (u32)device << 22; v |= (u32)address << 18; v |= data; pcicore_write32(pc, mdio_data, v); /* Wait for the device to complete the transaction */ udelay(10); - for (i = 0; i < 10; i++) { + for (i = 0; i < max_retries; i++) { v = pcicore_read32(pc, mdio_control); if (v & 0x100 /* Trans complete */) break; -- cgit v1.2.3 From ba91d1a1bcccd90247b5b9703c1a236cc2e95698 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 1 Apr 2011 12:07:34 +0200 Subject: ssb: pci: implement mdio reading MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'drivers/ssb') diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 08fa6fdfc101..76cbf96001f1 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -467,6 +467,49 @@ static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy) } } +#if 0 +//done but not used yet +static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address) +{ + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + + v = 0x80; /* Enable Preamble Sequence */ + v |= 0x2; /* MDIO Clock Divisor */ + pcicore_write32(pc, mdio_control, v); + + if (pc->dev->id.revision >= 10) { + max_retries = 200; + ssb_pcie_mdio_set_phy(pc, device); + } + + v = (1 << 30); /* Start of Transaction */ + v |= (1 << 29); /* Read Transaction */ + v |= (1 << 17); /* Turnaround */ + if (pc->dev->id.revision < 10) + v |= (u32)device << 22; + v |= (u32)address << 18; + pcicore_write32(pc, mdio_data, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < 200; i++) { + v = pcicore_read32(pc, mdio_control); + if (v & 0x100 /* Trans complete */) { + udelay(10); + ret = pcicore_read32(pc, mdio_data); + break; + } + msleep(1); + } + pcicore_write32(pc, mdio_control, 0); + return ret; +} +#endif + static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, u8 address, u16 data) { -- cgit v1.2.3 From ccc7c28af205888798b51b6cbc0b557ac1170a49 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 1 Apr 2011 13:26:52 +0200 Subject: ssb: pci: implement serdes workaround MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) (limited to 'drivers/ssb') diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 76cbf96001f1..1ba9f0ee6f94 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -15,6 +15,11 @@ #include "ssb_private.h" +static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address); +static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data); +static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address); +static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, + u8 address, u16 data); static inline u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) @@ -403,6 +408,27 @@ static int pcicore_is_in_hostmode(struct ssb_pcicore *pc) } #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ +/************************************************** + * Workarounds. + **************************************************/ + +static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc) +{ + return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; +} + +static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc) +{ + const u8 serdes_pll_device = 0x1D; + const u8 serdes_rx_device = 0x1F; + u16 tmp; + + ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, + ssb_pcicore_polarity_workaround(pc)); + tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); + if (tmp & 0x4000) + ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); +} /************************************************** * Generic and Clientmode operation code. @@ -430,6 +456,8 @@ void ssb_pcicore_init(struct ssb_pcicore *pc) #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ if (!pc->hostmode) ssb_pcicore_init_clientmode(pc); + + ssb_pcicore_serdes_workaround(pc); } static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address) @@ -467,8 +495,6 @@ static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy) } } -#if 0 -//done but not used yet static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address) { const u16 mdio_control = 0x128; @@ -508,7 +534,6 @@ static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address) pcicore_write32(pc, mdio_control, 0); return ret; } -#endif static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, u8 address, u16 data) -- cgit v1.2.3 From 9be1cb39c6551231a4f210097685da11aa6a537b Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Tue, 19 Apr 2011 22:40:22 +0200 Subject: ssb: pci: trivial: correct amount of maximum retries MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ssb') diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 1ba9f0ee6f94..dbda168e501b 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -522,7 +522,7 @@ static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address) pcicore_write32(pc, mdio_data, v); /* Wait for the device to complete the transaction */ udelay(10); - for (i = 0; i < 200; i++) { + for (i = 0; i < max_retries; i++) { v = pcicore_read32(pc, mdio_control); if (v & 0x100 /* Trans complete */) { udelay(10); -- cgit v1.2.3 From 3c35c84a70fc7d76cf7d975481fcb30468c68818 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Tue, 19 Apr 2011 22:40:23 +0200 Subject: ssb: cc: use correct min_msk for 0x4312 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Default min_msk on my 0x4312 is 0x80000CBB, not 0xCBB. Now we follow specs and wl (noticed in MMIO dumps). Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/driver_chipcommon_pmu.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/ssb') diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c index 5732bb2c3578..305ade7825f7 100644 --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c @@ -423,6 +423,8 @@ static void ssb_pmu_resources_init(struct ssb_chipcommon *cc) switch (bus->chip_id) { case 0x4312: + min_msk = 0xCBB; + break; case 0x4322: /* We keep the default settings: * min_msk = 0xCBB -- cgit v1.2.3 From 9835a30e980561082beb02ce724f6e555787bc19 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Sun, 24 Apr 2011 11:04:19 +0200 Subject: ssb: cc: clear GPIOPULL registers on init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/driver_chipcommon.c | 6 ++++++ include/linux/ssb/ssb_driver_chipcommon.h | 2 ++ 2 files changed, 8 insertions(+) (limited to 'drivers/ssb') diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c index 7c031fdc8205..b4b3733aefcf 100644 --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c @@ -260,6 +260,12 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc) if (cc->dev->id.revision >= 11) cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status); + + if (cc->dev->id.revision >= 20) { + chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0); + chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0); + } + ssb_pmu_init(cc); chipco_powercontrol_init(cc); ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h index 4f2d77a0c021..a08d693d8324 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -123,6 +123,8 @@ #define SSB_CHIPCO_FLASHDATA 0x0048 #define SSB_CHIPCO_BCAST_ADDR 0x0050 #define SSB_CHIPCO_BCAST_DATA 0x0054 +#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */ +#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */ #define SSB_CHIPCO_GPIOIN 0x0060 #define SSB_CHIPCO_GPIOOUT 0x0064 #define SSB_CHIPCO_GPIOOUTEN 0x0068 -- cgit v1.2.3 From a6ef8143839a8640532ba473906beb1a38b03e29 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Sat, 23 Apr 2011 19:30:28 +0200 Subject: ssb: mark bus as powered up earlier MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ssb_chipco_set_clockmode may want to touch CC registers to control power of the bus. However touching registers without powered_up set causes warnings. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/ssb') diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index e05ba6eefc7e..74aa2cca7d8c 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -1309,20 +1309,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { - struct ssb_chipcommon *cc; int err; enum ssb_clkmode mode; err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); if (err) goto error; - cc = &bus->chipco; - mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; - ssb_chipco_set_clockmode(cc, mode); #ifdef CONFIG_SSB_DEBUG bus->powered_up = 1; #endif + + mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; + ssb_chipco_set_clockmode(&bus->chipco, mode); + return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -- cgit v1.2.3 From 04ad1fb2640a4f23e99ccb705c179d64abac03f2 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Sat, 23 Apr 2011 19:30:29 +0200 Subject: ssb: update reject bit for Target State Low MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit My 14e4:4315 is SSB_IDLOW_SSBREV_26: read32 0xfaafcff8 -> 0x600422d5 My 14e4:4328 is SSB_IDLOW_SSBREV_24: read32 0xfaafcff8 -> 0x400422c5 My 14e4:432b is SSB_IDLOW_SSBREV_26 again: read32 0xfaafcff8 -> 0x600422d5 For all of them wl driver is using 0x2 reject bit: write32(0xf98) <- 0x00010002 So it seems SSB 2.3 is the exception using another bit. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/main.c | 15 +++++++-------- include/linux/ssb/ssb_regs.h | 2 +- 2 files changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers/ssb') diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 74aa2cca7d8c..ad3da93a428c 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -1117,23 +1117,22 @@ static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev) { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; - /* The REJECT bit changed position in TMSLOW between - * Backplane revisions. */ + /* The REJECT bit seems to be different for Backplane rev 2.3 */ switch (rev) { case SSB_IDLOW_SSBREV_22: - return SSB_TMSLOW_REJECT_22; + case SSB_IDLOW_SSBREV_24: + case SSB_IDLOW_SSBREV_26: + return SSB_TMSLOW_REJECT; case SSB_IDLOW_SSBREV_23: return SSB_TMSLOW_REJECT_23; - case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */ - case SSB_IDLOW_SSBREV_25: /* same here */ - case SSB_IDLOW_SSBREV_26: /* same here */ + case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */ case SSB_IDLOW_SSBREV_27: /* same here */ - return SSB_TMSLOW_REJECT_23; /* this is a guess */ + return SSB_TMSLOW_REJECT; /* this is a guess */ default: printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); WARN_ON(1); } - return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23); + return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23); } int ssb_device_is_enabled(struct ssb_device *dev) diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index 402955ae48ce..efbf459d571c 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -97,7 +97,7 @@ #define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ #define SSB_TMSLOW 0x0F98 /* SB Target State Low */ #define SSB_TMSLOW_RESET 0x00000001 /* Reset */ -#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */ +#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */ #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */ #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */ #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ -- cgit v1.2.3 From 6e914101d47c76e09b0568d094ef44257dd3d6e9 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Wed, 27 Apr 2011 17:39:47 +0200 Subject: ssb: pci: separate workarounds MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 98 ++++++++++++++++++++++++++------------------ 1 file changed, 58 insertions(+), 40 deletions(-) (limited to 'drivers/ssb') diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index dbda168e501b..adde4f060fd8 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -21,6 +21,8 @@ static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address); static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, u8 address, u16 data); +static void ssb_commit_settings(struct ssb_bus *bus); + static inline u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) { @@ -430,6 +432,60 @@ static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc) ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); } +static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc) +{ + struct ssb_device *pdev = pc->dev; + struct ssb_bus *bus = pdev->bus; + u32 tmp; + + tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); + tmp |= SSB_PCICORE_SBTOPCI_PREF; + tmp |= SSB_PCICORE_SBTOPCI_BURST; + pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); + + if (pdev->id.revision < 5) { + tmp = ssb_read32(pdev, SSB_IMCFGLO); + tmp &= ~SSB_IMCFGLO_SERTO; + tmp |= 2; + tmp &= ~SSB_IMCFGLO_REQTO; + tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT; + ssb_write32(pdev, SSB_IMCFGLO, tmp); + ssb_commit_settings(bus); + } else if (pdev->id.revision >= 11) { + tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); + tmp |= SSB_PCICORE_SBTOPCI_MRM; + pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); + } +} + +static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc) +{ + struct ssb_device *pdev = pc->dev; + u32 tmp; + + if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) { + /* TLP Workaround register. */ + tmp = ssb_pcie_read(pc, 0x4); + tmp |= 0x8; + ssb_pcie_write(pc, 0x4, tmp); + } + if (pdev->id.revision == 0) { + const u8 serdes_rx_device = 0x1F; + + ssb_pcie_mdio_write(pc, serdes_rx_device, + 2 /* Timer */, 0x8128); + ssb_pcie_mdio_write(pc, serdes_rx_device, + 6 /* CDR */, 0x0100); + ssb_pcie_mdio_write(pc, serdes_rx_device, + 7 /* CDR BW */, 0x1466); + } else if (pdev->id.revision == 1) { + /* DLLP Link Control register. */ + tmp = ssb_pcie_read(pc, 0x100); + tmp |= 0x40; + ssb_pcie_write(pc, 0x100, tmp); + } +} + /************************************************** * Generic and Clientmode operation code. **************************************************/ @@ -646,48 +702,10 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, if (pc->setup_done) goto out; if (pdev->id.coreid == SSB_DEV_PCI) { - tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); - tmp |= SSB_PCICORE_SBTOPCI_PREF; - tmp |= SSB_PCICORE_SBTOPCI_BURST; - pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); - - if (pdev->id.revision < 5) { - tmp = ssb_read32(pdev, SSB_IMCFGLO); - tmp &= ~SSB_IMCFGLO_SERTO; - tmp |= 2; - tmp &= ~SSB_IMCFGLO_REQTO; - tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT; - ssb_write32(pdev, SSB_IMCFGLO, tmp); - ssb_commit_settings(bus); - } else if (pdev->id.revision >= 11) { - tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); - tmp |= SSB_PCICORE_SBTOPCI_MRM; - pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); - } + ssb_pcicore_pci_setup_workarounds(pc); } else { WARN_ON(pdev->id.coreid != SSB_DEV_PCIE); - //TODO: Better make defines for all these magic PCIE values. - if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) { - /* TLP Workaround register. */ - tmp = ssb_pcie_read(pc, 0x4); - tmp |= 0x8; - ssb_pcie_write(pc, 0x4, tmp); - } - if (pdev->id.revision == 0) { - const u8 serdes_rx_device = 0x1F; - - ssb_pcie_mdio_write(pc, serdes_rx_device, - 2 /* Timer */, 0x8128); - ssb_pcie_mdio_write(pc, serdes_rx_device, - 6 /* CDR */, 0x0100); - ssb_pcie_mdio_write(pc, serdes_rx_device, - 7 /* CDR BW */, 0x1466); - } else if (pdev->id.revision == 1) { - /* DLLP Link Control register. */ - tmp = ssb_pcie_read(pc, 0x100); - tmp |= 0x40; - ssb_pcie_write(pc, 0x100, tmp); - } + ssb_pcicore_pcie_setup_workarounds(pc); } pc->setup_done = 1; out: -- cgit v1.2.3 From 5890a3ca34aae94dd736557ad8cb898ac2802aa0 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Wed, 27 Apr 2011 17:39:48 +0200 Subject: ssb: pci: update PCIe workarounds MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 35 +++++++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 8 deletions(-) (limited to 'drivers/ssb') diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index adde4f060fd8..32a9b61f008d 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -460,16 +460,23 @@ static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc) static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc) { - struct ssb_device *pdev = pc->dev; u32 tmp; + u8 rev = pc->dev->id.revision; - if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) { + if (rev == 0 || rev == 1) { /* TLP Workaround register. */ tmp = ssb_pcie_read(pc, 0x4); tmp |= 0x8; ssb_pcie_write(pc, 0x4, tmp); } - if (pdev->id.revision == 0) { + if (rev == 1) { + /* DLLP Link Control register. */ + tmp = ssb_pcie_read(pc, 0x100); + tmp |= 0x40; + ssb_pcie_write(pc, 0x100, tmp); + } + + if (rev == 0) { const u8 serdes_rx_device = 0x1F; ssb_pcie_mdio_write(pc, serdes_rx_device, @@ -478,11 +485,20 @@ static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc) 6 /* CDR */, 0x0100); ssb_pcie_mdio_write(pc, serdes_rx_device, 7 /* CDR BW */, 0x1466); - } else if (pdev->id.revision == 1) { - /* DLLP Link Control register. */ - tmp = ssb_pcie_read(pc, 0x100); - tmp |= 0x40; - ssb_pcie_write(pc, 0x100, tmp); + } else if (rev == 3 || rev == 4 || rev == 5) { + /* TODO: DLLP Power Management Threshold */ + ssb_pcicore_serdes_workaround(pc); + /* TODO: ASPM */ + } else if (rev == 7) { + /* TODO: No PLL down */ + } + + if (rev >= 6) { + /* Miscellaneous Configuration Fixup */ + tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5)); + if (!(tmp & 0x8000)) + pcicore_write16(pc, SSB_PCICORE_SPROM(5), + tmp | 0x8000); } } @@ -513,7 +529,10 @@ void ssb_pcicore_init(struct ssb_pcicore *pc) if (!pc->hostmode) ssb_pcicore_init_clientmode(pc); + /* Additional always once-executed workarounds */ ssb_pcicore_serdes_workaround(pc); + /* TODO: ASPM */ + /* TODO: Clock Request Update */ } static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address) -- cgit v1.2.3 From af335a6cbc3dfcba64ad31561c0da563d1c43a2d Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Wed, 27 Apr 2011 18:21:34 +0200 Subject: ssb: pci: early fix for SPROM core index MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/ssb') diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 32a9b61f008d..8fde1220bc89 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -414,6 +414,16 @@ static int pcicore_is_in_hostmode(struct ssb_pcicore *pc) * Workarounds. **************************************************/ +static void ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc) +{ + u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0)); + if (((tmp & 0xF000) >> 12) != pc->dev->core_index) { + tmp &= ~0xF000; + tmp |= (pc->dev->core_index << 12); + pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp); + } +} + static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc) { return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; @@ -521,6 +531,8 @@ void ssb_pcicore_init(struct ssb_pcicore *pc) if (!ssb_device_is_enabled(dev)) ssb_device_enable(dev, 0); + ssb_pcicore_fix_sprom_core_index(pc); + #ifdef CONFIG_SSB_PCICORE_HOSTMODE pc->hostmode = pcicore_is_in_hostmode(pc); if (pc->hostmode) -- cgit v1.2.3 From 0ca699552c441e2c4201a6f60eac98b8865c1743 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Wed, 27 Apr 2011 17:40:11 +0200 Subject: ssb: cc: prepare clockmode support for cores rev 10+ MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/driver_chipcommon.c | 62 +++++++++++++++++++++++++++++------------ 1 file changed, 44 insertions(+), 18 deletions(-) (limited to 'drivers/ssb') diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c index b4b3733aefcf..06d15b6f2215 100644 --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c @@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, if (!ccdev) return; bus = ccdev->bus; + + /* We support SLOW only on 6..9 */ + if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW) + mode = SSB_CLKMODE_DYNAMIC; + + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) + return; /* PMU controls clockmode, separated function needed */ + SSB_WARN_ON(ccdev->id.revision >= 20); + /* chipcommon cores prior to rev6 don't support dynamic clock control */ if (ccdev->id.revision < 6) return; - /* chipcommon cores rev10 are a whole new ball game */ + + /* ChipCommon cores rev10+ need testing */ if (ccdev->id.revision >= 10) return; + if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) return; switch (mode) { - case SSB_CLKMODE_SLOW: + case SSB_CLKMODE_SLOW: /* For revs 6..9 only */ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW; chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); break; case SSB_CLKMODE_FAST: - ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */ - tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; - tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL; - chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); + if (ccdev->id.revision < 10) { + ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */ + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; + tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL; + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); + } else { + chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, + (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) | + SSB_CHIPCO_SYSCLKCTL_FORCEHT)); + /* udelay(150); TODO: not available in early init */ + } break; case SSB_CLKMODE_DYNAMIC: - tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL; - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL; - if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL) - tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL; - chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); - - /* for dynamic control, we have to release our xtal_pu "force on" */ - if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL) - ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0); + if (ccdev->id.revision < 10) { + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL; + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL; + if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != + SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL) + tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL; + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); + + /* For dynamic control, we have to release our xtal_pu + * "force on" */ + if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL) + ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0); + } else { + chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, + (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) & + ~SSB_CHIPCO_SYSCLKCTL_FORCEHT)); + } break; default: SSB_WARN_ON(1); -- cgit v1.2.3 From 9fcce61c0eddbe21f42cb47bd5a366a6eb7956ce Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Sun, 8 May 2011 20:30:31 +0200 Subject: ssb: update list of devices supporting multiple 80211 cores MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some of the BCM43xx chips contain cores that are attached to the SSB, but are inactive as they do not connect to the external environment. These must not be registered. Several of these types are handled in driver ssb; however, the specific case of an inactive 802.11 cores is now treated in b43 and b43legacy. Although the current setup works, this minor change will place all such workarounds in ssb, and simplify the code in drivers b43 and b43legacy. Signed-off-by: Rafał Miłecki Tested-by: Larry Finger Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/ssb/scan.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/ssb') diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c index 7dca719fbcfb..45e5babd3961 100644 --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c @@ -258,7 +258,10 @@ static int we_support_multiple_80211_cores(struct ssb_bus *bus) #ifdef CONFIG_SSB_PCIHOST if (bus->bustype == SSB_BUSTYPE_PCI) { if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM && - bus->host_pci->device == 0x4324) + ((bus->host_pci->device == 0x4313) || + (bus->host_pci->device == 0x431A) || + (bus->host_pci->device == 0x4321) || + (bus->host_pci->device == 0x4324))) return 1; } #endif /* CONFIG_SSB_PCIHOST */ -- cgit v1.2.3 From 8576f815d5c8beb8b10f96abe31831b90af3d352 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Wed, 11 May 2011 02:10:58 +0200 Subject: ssb: move ssb_commit_settings and export it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commiting settings is possible on devices without PCI core (but with CC core). Export it for usage in drivers supporting other cores. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 26 -------------------------- drivers/ssb/main.c | 25 +++++++++++++++++++++++++ include/linux/ssb/ssb.h | 1 + 3 files changed, 26 insertions(+), 26 deletions(-) (limited to 'drivers/ssb') diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 8fde1220bc89..82feb348c8bb 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -21,8 +21,6 @@ static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address); static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, u8 address, u16 data); -static void ssb_commit_settings(struct ssb_bus *bus); - static inline u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) { @@ -659,30 +657,6 @@ static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, pcicore_write32(pc, mdio_control, 0); } -static void ssb_broadcast_value(struct ssb_device *dev, - u32 address, u32 data) -{ - /* This is used for both, PCI and ChipCommon core, so be careful. */ - BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); - BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); - - ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address); - ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */ - ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data); - ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */ -} - -static void ssb_commit_settings(struct ssb_bus *bus) -{ - struct ssb_device *dev; - - dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; - if (WARN_ON(!dev)) - return; - /* This forces an update of the cached registers. */ - ssb_broadcast_value(dev, 0xFD8, 0); -} - int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, struct ssb_device *dev) { diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index ad3da93a428c..ee2937c41424 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -1329,6 +1329,31 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); +static void ssb_broadcast_value(struct ssb_device *dev, + u32 address, u32 data) +{ + /* This is used for both, PCI and ChipCommon core, so be careful. */ + BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); + BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); + + ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address); + ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */ + ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data); + ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */ +} + +void ssb_commit_settings(struct ssb_bus *bus) +{ + struct ssb_device *dev; + + dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; + if (WARN_ON(!dev)) + return; + /* This forces an update of the cached registers. */ + ssb_broadcast_value(dev, 0xFD8, 0); +} +EXPORT_SYMBOL(ssb_commit_settings); + u32 ssb_admatch_base(u32 adm) { u32 base = 0; diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 7e99b348834c..f017b8900f78 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -518,6 +518,7 @@ extern int ssb_bus_may_powerdown(struct ssb_bus *bus); * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); +extern void ssb_commit_settings(struct ssb_bus *bus); /* Various helper functions */ extern u32 ssb_admatch_base(u32 adm); -- cgit v1.2.3 From 1159024d4c0aafecaa0c6635c55153b4b39cc1c8 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Fri, 13 May 2011 09:23:47 -0400 Subject: ssb: fix pcicore build breakage drivers/ssb/main.c:1336: error: 'SSB_PCICORE_BCAST_ADDR' undeclared (first use in this function) drivers/ssb/main.c:1337: error: 'SSB_PCICORE_BCAST_DATA' undeclared (first use in this function) drivers/ssb/main.c:1349: error: 'struct ssb_pcicore' has no member named 'dev' Reported-by: Randy Dunlap Signed-off-by: John W. Linville --- drivers/ssb/main.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers/ssb') diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index ee2937c41424..f8a13f863217 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -1332,21 +1332,27 @@ EXPORT_SYMBOL(ssb_bus_powerup); static void ssb_broadcast_value(struct ssb_device *dev, u32 address, u32 data) { +#ifdef CONFIG_SSB_DRIVER_PCICORE /* This is used for both, PCI and ChipCommon core, so be careful. */ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); +#endif - ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address); - ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */ - ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data); - ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */ + ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address); + ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */ + ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data); + ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */ } void ssb_commit_settings(struct ssb_bus *bus) { struct ssb_device *dev; +#ifdef CONFIG_SSB_DRIVER_PCICORE dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; +#else + dev = bus->chipco.dev; +#endif if (WARN_ON(!dev)) return; /* This forces an update of the cached registers. */ -- cgit v1.2.3