From e95fa7404716f6e25021e66067271a4ad8eb1486 Mon Sep 17 00:00:00 2001 From: Di Shen Date: Wed, 10 Jan 2024 19:55:26 +0800 Subject: thermal: gov_power_allocator: avoid inability to reset a cdev Commit 0952177f2a1f ("thermal/core/power_allocator: Update once cooling devices when temp is low") adds an update flag to avoid triggering a thermal event when there is no need, and the thermal cdev is updated once when the temperature is low. But when the trips are writable, and switch_on_temp is set to be a higher value, the cooling device state may not be reset to 0, because last_temperature is smaller than switch_on_temp. For example: First: switch_on_temp=70 control_temp=85; Then userspace change the trip_temp: switch_on_temp=45 control_temp=55 cur_temp=54 Then userspace reset the trip_temp: switch_on_temp=70 control_temp=85 cur_temp=57 last_temp=54 At this time, the cooling device state should be reset to 0. However, because cur_temp(57) < switch_on_temp(70) last_temp(54) < switch_on_temp(70) ----> update = false, update is false, the cooling device state can not be reset. Using the observation that tz->passive can also be regarded as the temperature status, set the update flag to the tz->passive value. When the temperature drops below switch_on for the first time, the states of cooling devices can be reset once, and tz->passive is updated to 0. In the next round, because tz->passive is 0, cdev->state will not be updated. By using the tz->passive value as the "update" flag, the issue above can be solved, and the cooling devices can be updated only once when the temperature is low. Fixes: 0952177f2a1f ("thermal/core/power_allocator: Update once cooling devices when temp is low") Cc: 5.13+ # 5.13+ Suggested-by: Wei Wang Signed-off-by: Di Shen Reviewed-by: Lukasz Luba [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki --- drivers/thermal/gov_power_allocator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/thermal/gov_power_allocator.c') diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c index 7b6aa265ff6a..81e061f183ad 100644 --- a/drivers/thermal/gov_power_allocator.c +++ b/drivers/thermal/gov_power_allocator.c @@ -762,7 +762,7 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, trip = params->trip_switch_on; if (trip && tz->temperature < trip->temperature) { - update = tz->last_temperature >= trip->temperature; + update = tz->passive; tz->passive = 0; reset_pid_controller(params); allow_maximum_power(tz, update); -- cgit v1.2.3